KLA-Tencor was formed in April 1997 through the merger of KLA Instruments Corporation and Tencor Instruments, two long-time leaders in the semiconductor equipment industry that originally began operations in 1975 and 1976, respectively.

The timing, length and severity of the up-and-down cycles in the semiconductor equipment industry are difficult to predict. The cyclical nature of the primary industry in which we operate is largely a function of our customers’ capital spending patterns and need for expanded manufacturing capacity, which in turn are affected by factors such as capacity utilization, consumer demand for products, inventory levels and our customers’ access to capital. This cyclicality affects our ability to accurately predict future revenue and, in some cases, future expense levels. During down cycles in our industry, the financial results of our customers may be negatively impacted, which could result not only in a decrease in, or cancellation or delay of, orders (which are generally subject to cancellation or delay by the customer with limited or no penalty) but also a weakening of their financial condition that could impair their ability to pay for our products or our ability to recognize revenue from certain customers. Our ability to recognize revenue from a particular customer may also be negatively impacted by the customer's funding status, which could be weakened not only by adverse business conditions or inaccessibility to capital markets for any number of macroeconomic or company-specific reasons, but also by funding limitations imposed by the customer's unique corporate structure. Any of these factors could negatively impact our business, operating results and financial condition.

When cyclical fluctuations result in lower than expected revenue levels, operating results may be adversely affected and cost reduction measures may be necessary in order for us to remain competitive and financially sound. During periods of declining revenues, as was experienced during fiscal year 2009, we must be in a position to adjust our cost and expense structure to prevailing market conditions and to continue to motivate and retain our key employees. If we fail to respond, or if our attempts to respond fail to accomplish our intended results, then our business could be seriously harmed. Furthermore, any workforce reductions and cost reduction actions that we adopt in response to down cycles may result in additional restructuring charges, disruptions in our operations and loss of key personnel. In addition, during periods of rapid growth, we must be able to increase manufacturing capacity and personnel to meet customer demand. We can provide no assurance that these objectives can be met in a timely manner in response to industry cycles. Each of these factors could adversely impact our operating results and financial condition.

In addition, our management typically provides quarterly forecasts for certain financial metrics, which, when made, are based on business and operational forecasts that are believed to be reasonable at the time. However, largely due to the cyclicality of our business and the industries in which we operate, and the fact that business conditions in our industries can change very rapidly as part of these cycles, our actual results may vary (and have varied in the past) from forecasted results. These variations can occur for any number of reasons, including, but not limited to, unexpected changes in the volume or timing of customer orders, product shipments or product acceptances; an inability to adjust our operations rapidly enough to adapt to changing business conditions; or a different than anticipated effective tax rate. The impact on our business of delays or cancellations of customer orders may be exacerbated by the short lead times that our customers expect between order placement and product shipment. This is because order delays and cancellations may lead not only to lower revenues, but also, due to the advance work we must do in anticipation of receiving a product order in order to meet the expected lead times, to significant inventory write-offs and manufacturing inefficiencies that decrease our gross margin. Any of these factors could materially and adversely affect our financial results for a particular quarter and could cause those results to differ materially from financial forecasts we have previously provided. We provide these forecasts with the intent of giving investors and analysts a better understanding of management's expectations for the future, but parties reviewing such forecasts must recognize that such forecasts are comprised of, and are themselves, forward-looking statements subject to the risks and uncertainties described in this Item 1A and elsewhere in this report and in our other public filings and public statements. If our operating or financial results for a particular period differ from our forecasts or the expectations of investment analysts, or if we revise our forecasts, the market price of our common stock could decline.

The semiconductor equipment industry and other industries that we serve are constantly developing and changing over time. Many of the risks associated with operating in these industries are comparable to the risks faced by all technology companies, such as the uncertainty of future growth rates in the industries that we serve, pricing trends in the end-markets for consumer electronics and other products (which place a growing emphasis on our customers' cost of ownership), changes in our customers' capital spending patterns and, in general, an environment of constant change and development, including decreasing product and component dimensions; use of new materials; and increasingly complex device structures, applications and process steps. If we fail to appropriately adjust our cost structure and operations to adapt to any of these trends, or, with respect to technological advances, if we do not timely develop new technologies and products that successfully anticipate and address these changes, we could experience a material adverse effect on our business, financial condition and operating results.

Success in the semiconductor equipment industry depends, in part, on continual improvement of existing technologies and rapid innovation of new solutions. For example, the size of semiconductor devices continues to shrink, and the industry is currently transitioning to the use of new materials and innovative fab processes. While we expect these trends will increase our customers’ reliance on diagnostic products such as ours, we cannot be sure that these trends will directly improve our business. These and other evolving customer needs require us to respond with continued development programs and to cut back or discontinue older programs, which may no longer have industry-wide support. Technical innovations are inherently complex and require long development cycles and appropriate staffing of highly qualified employees. Our competitive advantage and future business success depend on our ability to accurately predict evolving industry standards, to develop and introduce new products that successfully address changing customer needs, to win market acceptance of these new products and to manufacture these new products in a timely and cost-effective manner.

In this environment, we must continue to make significant investments in research and development in order to enhance the performance, features and functionality of our products, to keep pace with competitive products and to satisfy customer demands. Substantial research and development costs typically are incurred before we confirm the technical feasibility and commercial viability of a new product, and not all development activities result in commercially viable products. There can be no assurance that revenues from future products or product enhancements will be sufficient to recover the development costs associated with such products or enhancements. In addition, we cannot be sure that these products or enhancements will receive market acceptance or that we will be able to sell these products at prices that are favorable to us. Our business will be seriously harmed if we are unable to sell our products at favorable prices or if the market in which we operate does not accept our products.

In addition, the complexity of our products exposes us to other risks. We regularly recognize revenue from a sale upon shipment of the applicable product to the customer (even before receiving the customer's formal acceptance of that product) in certain situations, including sales of products for which installation is considered perfunctory, transactions in which the product is sold to an independent distributor and we have no installation obligations, and sales of products where we have previously delivered the same product to the same customer location and that prior delivery has been accepted. However, our products are very technologically complex and rely on the interconnection of numerous subcomponents (all of which must perform to their respective specifications), so it is conceivable that a product for which we recognize revenue upon shipment may ultimately fail to meet the overall product's required specifications. In such a situation, the customer may be entitled to certain remedies, which could materially and adversely affect our operating results for various periods and, as a result, our stock price.

Our success is dependent in part on our technology and other proprietary rights. We own various United States and international patents and have additional pending patent applications relating to some of our products and technologies. The process of seeking patent protection is lengthy and expensive, and we cannot be certain that pending or future applications will actually result in issued patents or that issued patents will be of sufficient scope or strength to provide meaningful protection or commercial advantage to us. Other companies and individuals, including our larger competitors, may develop technologies and obtain patents relating to our business that are similar or superior to our technology or may design around the patents we own, adversely affecting our business. In addition, we at times engage in collaborative technology development efforts with our customers and suppliers, and these collaborations may constitute a key component of certain of our ongoing technology and product research and development projects. The termination of any such collaboration, or delays caused by disputes or other unanticipated challenges that may arise in connection with any such collaboration, could significantly impair our research and development efforts, which could have a material adverse impact on our business and operations.

We also maintain trademarks on certain of our products and services and claim copyright protection for certain proprietary software and documentation. However, we can give no assurance that our trademarks and copyrights will be upheld or successfully deter infringement by third parties.

While patent, copyright and trademark protection for our intellectual property is important, we believe our future success in highly dynamic markets is most dependent upon the technical competence and creative skills of our personnel. We attempt to protect our trade secrets and other proprietary information through confidentiality and other agreements with our customers, suppliers, employees and consultants and through other security measures. We also maintain exclusive and non-exclusive licenses with third parties for strategic technology used in certain products. However, these employees, consultants and third parties may breach these agreements, and we may not have adequate remedies for wrongdoing. In addition, the laws of certain territories in which we develop, manufacture or sell our products may not protect our intellectual property rights to the same extent as do the laws of the United States. In any event, the extent to which we can protect our trade secrets through the use of confidentiality agreements is limited, and our success will depend to a significant extent on our ability to innovate ahead of our competitors.

We use a wide range of materials in the production of our products, including custom electronic and mechanical components, and we use numerous suppliers to supply these materials. We generally do not have guaranteed supply arrangements with our suppliers. Because of the variability and uniqueness of customers’ orders, we do not maintain an extensive inventory of materials for manufacturing. Through our business interruption planning, we seek to minimize the risk of production and service interruptions and/or shortages of key parts by, among other things, monitoring the financial stability of key suppliers, identifying (but not necessarily qualifying) possible alternative suppliers and maintaining appropriate inventories of key parts. Although we make reasonable efforts to ensure that parts are available from multiple suppliers, key parts may be available only from a single supplier or a limited group of suppliers. Also, key parts we obtain from some of our suppliers incorporate the suppliers’ proprietary intellectual property; in those cases we are increasingly reliant on third parties for high-performance, high-technology components, which reduces the amount of control we have over the availability and protection of the technology and intellectual property that is used in our products. In addition, if certain of our key suppliers experience liquidity issues and are forced to discontinue operations, which is a heightened risk during economic downturns, that would affect their ability to deliver parts and could result in delays for our products. Similarly, especially with respect to suppliers of high-technology components, our suppliers themselves have increasingly complex supply chains, and delays or disruptions at any stage of their supply chains may prevent us from obtaining parts in a timely manner and result in delays for our products. Our operating results and business may be adversely impacted if we are unable to obtain parts to meet our production requirements and product specifications, or if we are only able to do so on unfavorable terms. Furthermore, a supplier may discontinue production of a particular part for any number of reasons, including the supplier's financial condition or business operational decisions, which would require us to purchase, in a single transaction, a large number of such discontinued parts in order to ensure that a continuous supply of such parts remains available to our customers. Such “end-of-life” parts purchases could result in significant expenditures by us in a particular period, and ultimately any unused parts may result in a significant inventory write-off in a future period, either of which could have a material and adverse impact on our financial condition and results of operations for the applicable periods.

We attempt to operate our business in accordance with a business plan that is established annually, revised frequently (generally quarterly), and reviewed by management even more frequently (at least monthly). Our business plan is developed based on a number of factors, many of which require estimates and assumptions, such as our expectations of the economic environment, future business levels, our customers’ willingness and ability to place orders, lead-times, and future revenue and cash flow. Our budgeted operating expenses, for example, are based in part on our future revenue expectations. However, our ability to achieve our anticipated revenue levels is a function of numerous factors, including the volatile and cyclical nature of our primary industry, customer order cancellations, macroeconomic changes, operational matters regarding particular agreements, our ability to manage customer deliveries and resources for the installation and acceptance of our products (for products where customer acceptance is required before we can recognize revenue from such sales), our ability to manage delays or accelerations by customers in taking deliveries and the acceptance of our products (for products where customer acceptance is required before we can recognize revenue from such sales), our ability to operate our business and sales processes effectively, and a number of the other risk factors set forth in this Item 1A.

Because our expenses are in most cases relatively fixed in the short term, any revenue shortfall below expectations could have an immediate and significant adverse effect on our operating results. Similarly, if we fail to manage our expenses effectively or otherwise fail to maintain rigorous cost controls, we could experience greater than anticipated expenses during an operating period, which would also negatively affect our results of operations. If we fail to operate our business consistent with our business plan, our operating results in any period may be significantly and adversely impacted. Such an outcome could cause customers, suppliers or investors to view us as less stable, or could cause us to fail to meet financial analysts’ revenue or earnings estimates, any of which could have a material adverse impact on our business, financial condition or stock price.

In addition, our management is constantly striving to balance the requirements and demands of our customers with the availability of resources, the need to manage our operating model and other factors. In furtherance of those efforts, we often must exercise discretion and judgment as to the timing and prioritization of manufacturing, deliveries, installations and payment scheduling. Any such decisions may impact our ability to recognize revenue, including the fiscal period during which such revenue may be recognized, with respect to such products, which could have a material adverse effect on our business, financial condition or stock price.

Our Board of Directors first instituted a quarterly dividend during the fiscal year ended June 30, 2005. Since that time, we have announced several increases in the amount of our quarterly dividend level. We intend to continue to pay quarterly dividends subject to capital availability and periodic determinations by our Board of Directors that cash dividends are in the best interest of our stockholders and are in compliance with all laws and agreements applicable to the declaration and payment of cash dividends by us. Future dividends may be affected by, among other factors: our views on potential future capital requirements for investments in acquisitions and the funding of our research and development; legal risks; stock repurchase programs; changes in federal and state income tax laws or corporate laws; and changes to our business model. Our dividend payments may change from time to time, and we cannot provide assurance that we will continue to declare dividends at all or in any particular amounts. A reduction in our dividend payments could have a negative effect on our stock price.

In addition, changes by any rating agency to our outlook or credit rating could negatively affect the value and liquidity of both our debt and equity securities. Factors that can affect our credit rating include changes in our operating performance, the economic environment, conditions in the semiconductor and semiconductor equipment industries, our financial position, and changes in our business strategy.

In certain circumstances involving a change of control followed by a downgrade of the rating of our senior notes, we will be required to make an offer to repurchase the senior notes at a purchase price equal to 101% of the aggregate principal amount of the notes repurchased, plus accrued and unpaid interest. We cannot make any assurance that we will have sufficient financial resources at such time or will be able to arrange financing to pay the repurchase price of the senior notes. Our ability to repurchase the senior notes in such event may be limited by law, by the indenture associated with the senior notes, or by the terms of other agreements to which we may be party at such time. If we fail to repurchase the senior notes as required by the indenture, it would constitute an event of default under the indenture governing the senior notes which, in turn, may also constitute an event of default under other of our obligations.

Although our standard commercial documentation sets forth the terms and conditions that we intend to apply to commercial transactions with our business partners, counterparties to such transactions may not explicitly agree to our terms and conditions. In situations where we engage in business with a third party without an explicit master agreement regarding the applicable terms and conditions, or where the commercial documentation applicable to the transaction is subject to varying interpretations, we may have disputes with those third parties regarding the applicable terms and conditions of our business relationship with them. Such disputes could lead to a deterioration of our commercial relationship with those parties, costly and time-consuming litigation, or additional concessions or obligations being offered by us to resolve such disputes, or could impact our revenue or cost recognition. Any of these outcomes could materially and adversely affect our business, financial condition and results of operations.

In addition, in our commercial agreements, from time to time in the normal course of business we indemnify third parties with whom we enter into contractual relationships, including customers and lessors, with respect to certain matters. We have agreed, under certain conditions, to hold these third parties harmless against specified losses, such as those arising from a breach of representations or covenants, other third party claims that our products when used for their intended purposes infringe the intellectual property rights of such other third parties, or other claims made against certain parties. We may be compelled to enter into or accrue for probable settlements of alleged indemnification obligations, or we may be subject to potential liability arising from our customers’ involvements in legal disputes. In addition, notwithstanding the provisions related to limitations on our liability that we seek to include in our business agreements, the counterparties to such agreements may dispute our interpretation or application of such provisions, and a court of law may not interpret or apply such provisions in our favor, any of which could result in an obligation for us to pay material damages to third parties and engage in costly legal proceedings. It is difficult to determine the maximum potential amount of liability under any indemnification obligations, whether or not asserted, due to our limited history of prior indemnification claims and the unique facts and circumstances that are likely to be involved in any particular claim. Our business, financial condition and results of operations in a reported fiscal period could be materially and adversely affected if we expend significant amounts in defending or settling any purported claims, regardless of their merit or outcomes.

We are also exposed to potential costs associated with unexpected product performance issues. Our products and production processes are extremely complex and thus could contain unexpected product defects, especially when products are first introduced. Unexpected product performance issues could result in significant costs being incurred by us, including increased service or warranty costs, providing product replacements for (or modifications to) defective products, litigation related to defective products, product recalls, or product write-offs or disposal costs. These costs could be substantial and could have an adverse impact upon our business, financial condition and operating results. In addition, our reputation with our customers could be damaged as a result of such product defects, which could reduce demand for our products and negatively impact our business.

Furthermore, we occasionally enter into volume purchase agreements with our larger customers, and these agreements may provide for certain volume purchase incentives, such as credits toward future purchases. We believe that these arrangements are beneficial to our long-term business, as they are designed to encourage our customers to purchase higher volumes of our products. However, these arrangements could require us to recognize a reduced level of revenue for the products that are initially purchased, to account for the potential future credits or other volume purchase incentives. As a result, these volume purchase arrangements, while expected to be beneficial to our business over time, could materially and adversely affect our results of operations in near-term periods, including the revenue we can recognize on product sales and therefore our gross margins.

We are exposed to additional risks related to our receipt of external funding for certain strategic development programs from various governments and government agencies, both domestically and internationally. Governments and government agencies typically have the right to terminate funding programs at any time in their sole discretion, so there is no assurance that these sources of external funding will continue to be available to us in the future. In addition, under the terms of these government grants, the applicable granting agency typically has the right to audit the costs that we incur, directly and indirectly, in connection with such programs. Any such audit could result in modifications to, or even termination of, the applicable government funding program. For example, if an audit were to identify any costs as being improperly allocated to the applicable program, those costs would not be reimbursed, and any such costs that had already been reimbursed would have to be refunded. We do not know the outcome of any future audits. Any adverse finding resulting from any such audit could lead to penalties (financial or otherwise), termination of funding programs, suspension of payments, fines and suspension or prohibition from receiving future government funding from the applicable government or government agency, any of which could adversely impact our operating results, financial condition and ability to operate our business.

During the fiscal year ended June 30, 2009, we recorded material restructuring charges of $38.7 million related to our global workforce reduction, large excess inventory write-offs of $85.6 million, and material impairment charges of $446.7 million related to our goodwill and purchased intangible assets. If we were toagain encounter challenging economic conditions once again, we may implement additional cost reduction actions, discontinue certain business operations or make other organizational changes, which would require us to take additional, potentially material, restructuring charges related to, among other things, employee terminations or exit costs. We may also be required to write-off additional inventory if our product build plans or usage of service inventory decline,decline. Also, as our lead times from suppliers increase (due to the increasing complexity of the parts and suchcomponents they provide) and the lead times demanded by our customers decrease (due to the time pressures they face when introducing new products or technology or bringing new facilities into production), we may be compelled to increase our commitments, and therefore our risk exposure, to inventory purchases to meet our customers' demands in a timely manner, and that inventory may need to be written-off if demand for the underlying product declines for any reason. Such additional write-offs could constitute material charges.

As noted above, we recorded a material charge during the fiscal year ended June 30, 2009 related to the impairment of our goodwill and purchased intangible assets. Goodwill represents the excess of costs over the net fair value of net assets acquired in a business combination. Goodwill is not amortized, but is instead tested for impairment at least annually in accordance with authoritative guidance for goodwill. Purchased intangible assets with estimable useful lives are amortized over their respective estimated useful lives using the straight-line method, and are reviewed for impairment in accordance with authoritative guidance for long-lived assets. The valuation of goodwill and intangible assets requires assumptions and estimates of many critical factors, including revenue and market growth, operating cash flows, market multiples, and discount rates. A substantial decline in our stock price, or any other adverse change in market conditions, particularly if such change has the effect of changing one of the critical assumptions or estimates we previously used to calculate the value of our goodwill or intangible assets (and, as applicable, the amount of any previous impairment charge), could result in a change to the estimation of fair value that could result in an additional impairment charge.

Any such additional material charges, whether related to restructuring or goodwill or purchased intangible asset impairment, may have a material negative impact on our operating results and related financial statements.

We enter into factoring arrangements with financial institutions to sell certain of our trade receivables and promissory notes from customers without recourse. In addition, we maintain bank accounts with several domestic and foreign financial institutions, any of which may prove not to be financially viable. If we were to stop entering into these factoring arrangements, our operating results, financial condition and cash flows could be adversely impacted by delays or failures in collecting trade receivables. However, by entering into these arrangements, and by engaging these financial institutions for banking services, we are exposed to additional risks. If any of these financial institutions experiences financial difficulties or is otherwise unable to honor the terms of our factoring or deposit arrangements, we may experience material financial losses due to the failure of such arrangements or a lack of access to our funds, any of which could have an adverse impact upon our operating results, financial condition and cash flows.

In connection with the settlement of certain government actions and other legal proceedings related to our historical stock option practices, we have explicitly agreed as a condition to such settlements that we will comply with certain laws, such as the books and records provisions of the federal securities laws. If we were to violate any such law, we might not only be subject to the significant penalties applicable to such violation, but our past settlements may also be impacted by such violation, which could give rise to additional government actions or other legal proceedings. Any such additional actions or proceedings may require us to expend significant management time and incur significant accounting, legal and other expenses, and may divert attention and resources from the operation of our business. These expenditures and diversions, as well as an adverse resolution of any such action or proceeding, could have a material adverse effect on our business, financial condition and results of operations.

A majority of our annual revenues are derived from outside the United States, and we maintain significant operations outside the United States. We expect that these conditions will continue in the foreseeable future. Managing global operations and sites located throughout the world presents a number of challenges, including but not limited to:

As is typical in the semiconductor equipment industry, from time to time we have received communications from other parties asserting the existence of patent rights, copyrights, trademark rights or other intellectual property rights which they believe cover certain of our products, processes, technologies or information. In addition, we occasionally receive notification from customers who believe that we owe them indemnification or other obligations related to intellectual property claims made against such customers by third parties. With respect to intellectual property infringement disputes, our customary practice is to evaluate such infringement assertions and to consider whether to seek licenses where appropriate. However, we cannot ensure that licenses can be obtained or, if obtained, will be on acceptable terms or that costly litigation or other administrative proceedings will not occur. The inability to obtain necessary licenses or other rights on reasonable terms could seriously harm our results of operations and financial condition. Furthermore, we may potentially be subject to claims by customers, suppliers or other business partners, or by governmental law enforcement agencies, related to our receipt, distribution and/or use of third-party intellectual property or confidential information. Legal proceedings and claims, regardless of their merit, and associated internal investigations with respect to intellectual property or confidential information disputes are often expensive to prosecute, defend or conduct; may divert management's attention and other company resources; and/or may result in restrictions on our ability to sell our products, settlements on significantly adverse terms or adverse judgments for damages, injunctive relief, penalties and fines, any of which could have a significant negative effect on our business, results of operations and financial condition. There can be no assurance regarding the outcome of future legal proceedings, claims or investigations. The instigation of legal proceedings or claims, our inability to favorably resolve or settle such proceedings or claims, or the determination of any adverse findings against us or any of our employees in connection with such proceedings or claims could materially and adversely affect our business, financial condition and results of operations, as well as our business reputation.

We are subject to various risks related to compliance with new, existing, different, inconsistent or even conflicting laws, rules and regulations enacted by legislative bodies and/or regulatory agencies in the countries in which we operate and with which we must comply, including environmental, safety, antitrust, anti-corruption/anti-bribery, unclaimed property and export control regulations. Our failure or inability to comply with existing or future laws, rules or regulations, or changes to existing laws, rules or regulations (including changes that result in inconsistent or conflicting laws, rules or regulations), in the countries in which we operate could result in violations of contractual or regulatory obligations that may adversely affect our operating results, financial condition and ability to conduct our business. From time to time, we may receive inquiries or audit notices from governmental or regulatory bodies, or we may participate in voluntary disclosure programs, related to legal, regulatory or tax compliance matters, and these inquiries, notices or programs may result in significant financial cost (including investigation expenses, defense costs, assessments and penalties), reputational harm and other consequences that could materially and adversely affect our operating results and financial condition.

Our properties and many aspects of our business operations are subject to various domestic and international environmental laws and regulations, including those that control and restrict the use, transportation, emission, discharge, storage and disposal of certain chemicals, gases and other substances. Any failure to comply with applicable environmental laws, regulations or requirements may subject us to a range of consequences, including fines, suspension of certain of our business activities, limitations on our ability to sell our products, obligations to remediate environmental contamination, and criminal and civil liabilities or other sanctions. In addition, changes in environmental regulations (including regulations relating to climate change and greenhouse gas emissions) could require us to invest in potentially costly pollution control equipment, alter our manufacturing processes or use substitute (potentially more expensive and/or rarer) materials. Further, we use hazardous and other regulated materials that subject us to risks of strict liability for damages caused by any release, regardless of fault. We also face increasing complexity in our manufacturing, product design and procurement operations as we adjust to new and prospective requirements relating to the materials composition of our products, including restrictions on lead and other substances and requirements to track the sources of certain metals and other materials. The cost of complying, or of failing to comply, with these and other regulatory restrictions or contractual obligations could adversely affect our operating results, financial condition and ability to conduct our business.

In addition, we may from time to time be involved in legal proceedings or claims regarding employment, contracts, product performance, product liability, antitrust, environmental regulations, securities, unfair competition and other matters (in addition to proceedings and claims related to intellectual property matters, which are separately discussed elsewhere in this Item 1A). These legal proceedings and claims, regardless of their merit, may be time-consuming and expensive to prosecute or defend, divert management’s attention and resources, and/or inhibit our ability to sell our products. There can be no assurance regarding the outcome of current or future legal proceedings or claims, which could adversely affect our operating results, financial condition and ability to operate our business.

Our employees are vital to our success, and our key management, engineering and other employees are difficult to replace. We generally do not have employment contracts with our key employees. Further, we do not maintain key person life insurance on any of our employees. The expansion of high technology companies worldwide has increased demand and competition for qualified personnel. If we are unable to retain key personnel, or if we are not able to attract, assimilate and retain additional highly qualified employees to meet our needs in the future, our business and operations could be harmed.

We outsource a number of services, including our transportation and logistics management of spare parts and certain accounting functions, to domestic and overseas third-party service providers. While outsourcing arrangements may lower our cost of operations, they also reduce our direct control over the services rendered. It is uncertain what effect such diminished control will have on the quality or quantity of products delivered or services rendered, on our ability to quickly respond to changing market conditions, or on our ability to ensure compliance with all applicable domestic and foreign laws and regulations. In addition, many of these outsourced service providers, including certain hosted software applications that we use for confidential data storage, employ “cloud computing” technology for such storage (which refers to an information technology hosting and delivery system in which data is not stored within the user's physical infrastructure but instead are delivered to and consumed by the user as an Internet-based service). These providers' cloud computing systems may be susceptible to “cyber incidents,” such as intentional cyber attacks aimed at theft of sensitive data or inadvertent cyber-security compromises, that are outside of our control. If we do not effectively develop and manage our outsourcing strategies, if required export and other governmental approvals are not timely obtained, if our third-party service providers do not perform as anticipated, or do not adequately protect our data from cyber-related security breaches, or if there are delays or difficulties in enhancing business processes, we may experience operational difficulties (such as limitations on our ability to ship products), increased costs, manufacturing or service interruptions or delays, loss of intellectual property rights or other sensitive data, quality and compliance issues, and challenges in managing our product inventory or recording and reporting financial and management information, any of which could materially and adversely affect our business, financial condition and results of operations.

Our global operations are linked by information systems, including telecommunications, the internet, our corporate intranet, network communications, email and various computer hardware and software applications. Despite our implementation of network security measures, our tools and servers are vulnerable to computer viruses, break-ins and similar disruptions from unauthorized tampering with our computer systems and tools located at customer sites, or could be subject to system failures or malfunctions for other reasons. System failures or malfunctioning, such as difficulties with our customer relationship management (“CRM”) system, could disrupt our operations and our ability to timely and accurately process and report key components of our financial results. Our enterprise resource planning (“ERP”) system is integral to our ability to accurately and efficiently maintain our books and records, record transactions, provide critical information to our management, and prepare our financial statements. Any disruptions or difficulties that may occur in connection with our ERP system or other systems (whether in connection with the regular operation, periodic enhancements, modifications or upgrades of such systems or the integration of our acquired businesses into such systems) could adversely affect our ability to complete important business processes, such as the evaluation of our internal control over financial reporting pursuant to Section 404 of the Sarbanes-Oxley Act of 2002. Any such event could have an adverse effect on our business, operating results and financial condition.

In addition to our efforts to develop new technologies from internal sources, part of our growth strategy is to pursue acquisitions and acquire new technologies from external sources. As part of this effort, we may make acquisitions of, or significant investments in, businesses with complementary products, services and/or technologies. There can be no assurance that we will find suitable acquisition candidates or that acquisitions we complete will be successful. In addition, we may use equity to finance future acquisitions, which would increase our number of shares outstanding and be dilutive to current stockholders.

If we are unable to successfully integrate and manage acquired businesses or if acquired businesses perform poorly, then our business and financial results may suffer. It is possible that the businesses we have acquired, as well as businesses that we may acquire in the future, may perform worse than expected or prove to be more difficult to integrate and manage than expected. In addition, we may lose key employees of the acquired companies. As a result, risks associated with acquisition transactions may give rise to a material adverse effect on our business and financial results for a number of reasons, including:

At times, we may also enter into strategic alliances with customers, suppliers or other business partners with respect to development of technology and intellectual property. These alliances typically require significant investments of capital and exchange of proprietary, highly sensitive information. The success of these alliances depends on various factors over which we may have limited or no control and requires ongoing and effective cooperation with our strategic partners. Mergers and acquisitions and strategic alliances are inherently subject to significant risks, and the inability to effectively manage these risks could materially and adversely affect our business, financial condition and operating results.

We have significant manufacturing operations in the United States, Singapore, Israel, Belgium, Germany and Germany.China. In addition, our business is international in nature, with our sales, service and administrative personnel and our customers located in numerous countries throughout the world. Operations at our manufacturing facilities and our assembly subcontractors, as well as our other operations and those of our customers, are subject to disruption for a variety of reasons, including work stoppages, acts of war, terrorism, health epidemics, fire, earthquake, volcanic eruptions, energy shortages, flooding or other natural disasters. Such disruption could cause delays in, among other things, shipments of products to our customers, our ability to perform services requested by our customers, or the installation and acceptance of our products at customer sites. We cannot ensure that alternate means of conducting our operations (whether through alternate production capacity or service providers or otherwise) would be available if a major disruption were to occur or that, if such alternate means were available, they could be obtained on favorable terms.

In addition, as part of our cost-cutting actions, we have consolidated several operating facilities. Our California operations are now primarily centralized in our Milpitas facility. The consolidation of our California operations into a single campus could further concentrate the risks related to any of the disruptive events described above, such as acts of war or terrorism, earthquakes, fires or other natural disasters, if any such event were to impact our Milpitas facility.

The threat of terrorism targeted at, or acts of war in, the regions of the world in which we do business increases the uncertainty in our markets. Any act of terrorism or war that affects the economy or the semiconductor industry could adversely affect our business. Increased international political instability in various parts of the world, disruption in air transportation and further enhanced security measures as a result of terrorist attacks may hinder our ability to do business and may increase our costs of operations. We maintain significant manufacturing and research and development operations in Israel, an area that has historically experienced a high degree of political instability, and we are therefore exposed to risks associated with future instability in that region. Such instability could directly impact our ability to operate our business (or our customers' ability to operate their business) in the affected region, cause us to incur increased costs in transportation, make such transportation unreliable, increase our insurance costs, and cause international currency markets to fluctuate. This same instability could have the same effects on our suppliers and their ability to timely deliver their products. If international political instability continues or increases in any region in which we do business, our business and results of operations could be harmed. We are predominantly uninsured for losses and interruptions caused by terrorist acts and acts of war.

We purchase insurance to help mitigate the economic impact of certain insurable risks; however, certain other risks are uninsurable or are insurable only at significant cost or cannot be mitigated with insurance. An earthquake could significantly disrupt our manufacturing operations, a significant portion of which are conducted in California, an area highly susceptible to earthquakes. It could also significantly delay our research and engineering efforts on new products, much of which is also conducted in California. We take steps to minimize the damage that would be caused by an earthquake, but there is no certainty that our efforts will prove successful in the event of an earthquake. We self insure earthquake risks because we believe this is a prudent financial decision based on our large cash reserves and the high cost and limited coverage available in the earthquake insurance market. Certain other risks are also self-insured either based on a similar cost-benefit analysis, or based on the unavailability of insurance. If one or more of the uninsured events occurs, we could suffer major financial loss.

We have some exposure to fluctuations in foreign currency exchange rates, primarily the Euro and the Japanese Yen. We have international subsidiaries that operate and sell our products globally. In addition, an increasing proportion of our manufacturing activities are conducted outside of the United States, and many of the costs associated with such activities are denominated in foreign currencies. We routinely hedge our exposures to certain foreign currencies with certain financial institutions in an effort to minimize the impact of certain currency exchange rate fluctuations, but these hedges may be inadequate to protect us from currency exchange rate fluctuations. To the extent that these hedges are inadequate, or if there are significant currency exchange rate fluctuations in currencies for which we do not have hedges in place, our reported financial results or the way we conduct our business could be adversely affected. Furthermore, if a financial counterparty to our hedges experiences financial difficulties or is otherwise unable to honor the terms of the foreign currency hedge, we may experience material financial losses.

Our investment portfolio primarily consists of both corporate and government debt securities that have a maximum effective maturity of three years. The longer the duration of these securities, the more susceptible they are to changes in market interest rates and bond yields. As market interest rates and bond yields increase, those securities with a lower yield-at-cost show a mark-to-market unrealized loss. We have the ability to realize the full value of all these investments upon maturity. However, an impairment of the fair market value of our investments, even if unrealized, must be reflected in our financial statements for the applicable period and may therefore have a material adverse effect on our results of operations for that period.

In addition, the market price for our common stock is volatile and has fluctuated significantly during recent years. The trading price of our common stock could continue to be highly volatile and fluctuate widely in response to various factors, including without limitation conditions in the semiconductor industry and other industries in which we operate, fluctuations in the global economy or capital markets, our operating results or other performance metrics, or adverse consequences experienced by us as a result of any of the risks described elsewhere in this Item 1A. Volatility in the market price of our common stock could cause an investor in our common stock to experience a loss on the value of their investment in us and could also adversely impact our ability to raise capital through the sale of our common stock or to use our common stock as consideration to acquire other companies.

We are subject to tax audits in various jurisdictions, and such jurisdictions may assess additional income or other taxes against us. Although we believe our tax estimates are reasonable, the final determination of tax audits and any related litigation could be materially different from our historical income tax provisions and accruals. The results of an audit or litigation could have a material adverse effect on our operating results or cash flows in the period or periods for which that determination is made.

A number of factors may adversely impact our future effective tax rates, such as the jurisdictions in which our profits are determined to be earned and taxed; the resolution of issues arising from tax audits with various tax authorities; changes in the valuation of our deferred tax assets and liabilities; adjustments to estimated taxes upon finalization of various tax returns; increases in expenses not deductible for tax purposes, including write-offs of acquired in-process research and development and impairment of goodwill in connection with acquisitions; changes in available tax credits; changes in stock-based compensation expense; changes in tax laws or the interpretation of such tax laws (for example, proposals for fundamental United States international tax reform; changes in generally accepted accounting principles; and the repatriation of earnings from outside the United States for which we have not previously provided for United States taxes. A change in our effective tax rate can adversely impact our results from operations.

Federal securities laws, rules and regulations, as well as NASDAQ rules and regulations, require companies to maintain extensive corporate governance measures, impose comprehensive reporting and disclosure requirements, set strict independence and financial expertise standards for audit and other committee members and impose civil and criminal penalties for companies and their chief executive officers, chief financial officers and directors for securities law violations. These laws, rules and regulations have increased, and in the future are expected to continue to increase, the scope, complexity and cost of our corporate governance, reporting and disclosure practices, which could harm our results of operations and divert management’s attention from business operations.

New accounting pronouncements and taxation rules and varying interpretations of accounting pronouncements and taxation rules have occurred and will continue to occur in the future. Changes to (or revised interpretations or applications of) existing tax or accounting rules or the questioning of current or past practices may adversely affect our reported financial results or the way we conduct our business.

We enter into sales arrangements that may consist of multiple deliverables of our products and services where certain elements of the sales arrangement are not delivered and accepted in one reporting period. Judgment is required to properly identify the accounting units of the multiple deliverable transactions and to determine the manner in which revenue should be allocated among the accounting units. Additionally, judgment is required to interpret various commercial terms and determine when all criteria of revenue recognition have been met in order for revenue recognition to occur in the appropriate accounting period. While changes in the allocation of the estimated selling price between the accounting units will not affect the amount of total revenue recognized for a particular arrangement, any material changes in these allocations could impact the timing of revenue recognition, which could have a material effect on our financial position and results of operations.

Trade-in rights are occasionally granted to customers to trade in tools in connection with subsequent purchases. We estimate the value of the trade-in right and reduce the revenue recognized on the initial sale. This amount is recognized at the earlier of the exercise of the trade-in right or the expiration of the trade-in right.

Spare parts revenue is recognized when the product has been shipped, risk of loss has passed to the customer and collection of the resulting receivable is probable.

Service and maintenance contract revenue is recognized ratably over the term of the maintenance contract. Revenue from services performed in the absence of a maintenance contract, including consulting and training revenue, is recognized when the related services are performed and collectibility is reasonably assured.

We sell stand-alone software that is subject to the software revenue recognition guidance. We periodically review selling prices to determine whether vendor-specific objective evidence (“VSOE”) exists, and in some situations where we are unable to establish VSOE for undelivered elements, such as post-contract service, revenue is recognized ratably over the term of the service contract.

The deferred system profit balance equals the amount of deferred system revenue that was invoiced and due on shipment, less applicable product and warranty costs. Deferred system revenue represents the value of products that have been shipped and billed to customers which have not met our revenue recognition criteria. Deferred system profit does not include the profit associated with product shipments to customers in Japan, to whom title does not transfer until customer acceptance. Shipments to customers in Japan are classified as inventory at cost until the time of acceptance.

Changes in gross margin percentage driven by revenue volume reflect our ability to leverage existing infrastructure to generate higher revenues. It also includes the effect of fluctuations in foreign exchange rates, average customer pricing and customer revenue deferrals associated with volume purchase agreements. Changes in gross margin percentage from mix of products and services sold reflect the impact of changes in the composition within product and service offerings. Changes in gross margin percentage from manufacturing labor, overhead and efficiencies reflect our ability to manage costs and drive productivity as we scale our manufacturing activity to respond to customer requirements; this includes the impact of capacity utilization, use of overtime and variability of cost structure. Changes in gross margin percentage from other service and manufacturing costs include the impact of customer support costs, including the efficiencies with which we deliver services to our customers, and the effectiveness with which we manage our production plans and inventory risk.