UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
__________________
FORM 10-K
☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 20212022
OR
☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from ____________to____________
Commission File No. 001-34220
__________________________
3D SYSTEMS CORPORATION
(Exact name of Registrant as specifiedSpecified in its Charter)
__________________________ | | | | | |
| Delaware | 95-4431352 |
(State or Other Jurisdiction of
Incorporation or Organization) | (I.R.S. Employer
Identification No.) |
333 Three D Systems Circle
Rock Hill, South Carolina 29730
(Address of Principal Executive Offices and Zip Code)
(Registrant’s Telephone Number, Including Area Code): (803) 326-3900
_________________________
Securities registered pursuant to Section 12(b) of the Act:
| | | | | | | | | | | | | | |
| Title of each class | | Trading Symbol | | Name of each exchange on which registered |
| Common Stock, par value $0.001 per share | | DDD | | New York Stock Exchange |
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
| | | | | | | | | | | | | | |
| Large accelerated filer | ☒ | | Accelerated filer | ☐ |
| Non-accelerated filer | ☐ | | Smaller reporting company | ☐ |
| Emerging growth company | ☐ | | | |
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Securities Act.Exchange Act .☐
Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒
If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐
Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based-compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). Yes ☐ No ☐
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act.) Yes ☐ No ☒
The aggregate market value of the registrant’s Common Stock held by non-affiliates of the registrant on June 30, 20212022 was $4,883,584,523.$1,223,082,545. For purposes of this computation, it has been assumed that the shares beneficially held by directors and executive officers of the registrant were “held by affiliates.” This assumption is not to be deemed an admission by these persons that they are affiliates of the registrant.
The number of shares of the registrant's Common Stock outstanding as of February 23, 2022: 128,309,940March 7, 2023: 131,155,200.
DOCUMENTS INCORPORATED BY REFERENCE: Portions of the registrant’s definitive proxy statement for its 20222023 Annual Meeting of Stockholders are incorporated by reference into Part III of this Form 10-K.
3D SYSTEMS CORPORATION
Annual Report on Form 10-K
For the Year Ended December 31, 20212022
TABLE OF CONTENTS
This Annual Report on Form 10-K (“Form 10-K”) contains forward-looking statements, within the meaning of the Private Securities Litigation Reform Act of 1995, that involve risks and uncertainties. Many of the forward-looking statements are located in Part II, Item 7 of this Form 10-K under the heading “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from historical results or from any future results expressed or implied by such forward-looking statements. In many cases, you can identify forward-looking statements by terms such as “believes,” “belief,” “expects,” “may,” “will,” “estimates,” “intends,” “anticipates,” or “plans” or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions and current expectations concerning future events and trends, using information currently available, and are necessarily subject to uncertainties, many of which are outside our control. Although we believe that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at or by which any such performance or results will be achieved. A number of important factors could cause actual results to differ materially from those expressed in or implied by the forward-looking statements. Factors that could cause such differences include, but are not limited to, those discussed in Part I, Item 1A of this Form 10-K under the heading “Risk Factors.” All subsequent written and oral forward-looking statements attributable to the Company or to individuals acting on our behalf are expressly qualified in their entirety by this discussion. The Company assumes no obligation to revise or update any forward-looking statements for any reason, except as required by law.
PART I
Item 1. Business
General
3D Systems Corporation (“3D Systems” or the “Company” or “we”“we,” "our" or “us”) providesmarkets our products and services through subsidiaries in North America and South America (collectively referred to as “Americas”), Europe and the Middle East (collectively referred to as “EMEA”) and the Asia Pacific and Oceania region (collectively referred to as “APAC”). We provide comprehensive 3D printing and digital manufacturing solutions, including 3D printers for plastics metals, wax and bioinks,metals, materials, software, advanced manufacturing services and digital design tools. Our solutions support advanced applications in two key industry verticals: Healthcare Solutions (which includes dental, medical devices, personalized health services and regenerative medicine) and Industrial Solutions (which includes aerospace, defense, transportation and general manufacturing). We have over 35 years of experience and expertise which have proven vital to our development of an ecosystem and end-to-end digital workflow solutions that enable customers to optimize product designs, transform workflows, bring innovative products to market our products and services through subsidiaries and channel partners in North America and South America (collectively referred to as “Americas”), Europe, the Middle East, and Africa (collectively referred to as "EMEA") and Asia-Pacific and Oceania (collectively referred to as "APAC").drive new business models.
Business Strategy
Accelerating Additive Manufacturing Adoption
We partner with customers to enable them to adopt and scale additive manufacturing in their production environments. We believe that our additive manufacturing capabilities can help customers solve a number of design and manufacturing challenges – such as improved lead times, enhanced design freedom, part consolidation and the ability for mass customization. We believe that we have both the scale and the breadth of technologies, encompassing hardware platforms, materials and software, that our customers require for the successful implementation of additive manufacturing into their design and manufacturing processes. Using a strong application focus in each of our two business segments, we integrateour Applications Innovation Group integrates our printer materialhardware, materials, software and software technologiesprofessional and technical services in unique combinations to solve a customer’s product need. Once complete, we can scale the process for the customer to a certain production level through our Advanced Manufacturing solutions, and, with increasing demand, we can enable a customer to continue scaling to high volumes.volumes within their own production facilities. This transfer of the workflow involves providing the printing systems, materials and software, along with the process definition and other technical expertise, that results inenables a seamless transfer of capability to the manufacturer. We expect the result of this approach to drive recurring revenue streams as customers adopt additive manufacturing solutions and consume materials to produce parts, utilize software to manage the print process and manufacturing operations, and make use of our service offerings for application development, maintenance and upgrades. Our proficiency in providing industry focused application and solution development for customers includes a number of internal assets and capabilities, including:
a.A full range of additive manufacturing hardware technologies and materials to address needs in metals and plastics (including biocompatible materials for medical use), wax and bioprinting
b.A services infrastructureAn Application Innovation Group that includes industry and technology application experts, customer innovation and advanced manufacturing centers and post-sale service and support
c.A software suite that enables end-to-end additive manufacturing including design, simulation, process management and manufacturing execution
d.Scale that includes significant and diverse experience in production parts and applications combined with a global reach to service our customers worldwide
As part of our strategy to enable customers to adopt additive manufacturing in November 2021production environments, during 2022 we acquired Oqton,made a software company thatnumber of targeted investments and entered into partnership arrangements designed to broaden and enhance our product offering of 3D printing solutions and to expand addressable markets for our Industrial Solutions and Healthcare Solutions segments. Among these investments were the acquisitions of Titan Additive LLC (“Titan”), Kumovis GmbH ("Kumovis"), and dp polar GmbH (“dp polar”). Titan is a leaderpellet-based extrusion platform that addresses customer applications requiring large build volumes at a significantly lower cost. Kumovis is an extrusion platform that utilizes medical-grade, high-performance polymers such as PEEK (polyether ether ketone) to print implantable medical devices and surgical instruments with attractive performance qualities. dp polar has designed a 3D printing platform that utilizes a unique rotating build platform to enable true high-speed mass production of customized polymer components. Also during 2022, we signed a joint venture agreement with the Saudi Arabian Industrial Investments company (“Dussur”) with the goal of expanding the use of additive manufacturing within the Kingdom of Saudi Arabia and surrounding geographies. We also acquired a minority ownership interest in Enhatch Inc. (“Enhatch”) during 2022. As part of this relationship, 3D Systems and Enhatch will incorporate the creationautomation and artificial intelligence capabilities of Enhatch’s Intelligent Surgery Ecosystem into 3D Systems’ proven workflow for patient-specific surgical planning solutions.
In addition, we believe that developing our software capabilities is an important driver of our future growth. We made significant internal investments during 2022 to further enhance our capability to offer a new breedcomprehensive suite of intelligent, cloud-based3D printing software applications. We are working to integrate 3D System’s legacy stand-alone software applications such as Geomagic, 3D Sprint, and 3DXpert into the Oqton Manufacturing Operating System (MOS) platform. This("MOS") that we acquired in 2021. The goal of this effort is to create a unified cloud-based software solution that will enable users to automate and control their entire digital manufacturing workflow from order to delivery. We are making our new software platform is tailored for flexible production environments that increasingly utilizeavailable to the entire additive industry, including both customers and competitors, as a rangemeans to accelerate the adoption of advanced manufacturing and automation technologies, including additive manufacturing solutions, in theirhigh-volume production workflows. The cloud-based solution leveragesapplications across multiple industry segments.
We believe that the Industrial Internetabove-described acquisitions, partnerships, and software development efforts, as well as other initiatives begun during 2022, will accelerate the adoption of Things, artificial intelligence,additive manufacturing in our target industrial and machine learning technologieshealthcare end-markets and open up profitable future growth opportunities for our company. Realizing the full benefit of these growth-oriented initiatives will require us to deliver solutions to customers seeking to automate their digital manufacturing workflows, scale theirmake additional investments in operations and enhance their competitive position.In addition, in May 2021, we announced the acquisition of Additive Works, a Germany-based software company focused upon simulation-based optimizationdevelopment activities during 2023 and automation of the additive manufacturing print preparation and workflow. This highly automated simulation software increases productivity by reducing set-up time while improving product yield, throughput, and component performance.beyond.
Investing in Regenerative Medicine
As an early and continuing innovator in additive manufacturing, we have significant experience in bringing this technology to new markets. In 2021,2022, we announced an expansion ofcontinued to expand our focus and investments in the application of additive manufacturing for regenerative medicine. Our approachCurrently, our efforts in the area of regenerative medicine involvesconsist mainly of pre-commercial research and development ("R&D") and involve three strategies.
The first strategy is the use of additive manufacturing for human organ transplantation. Each year, end-stage organ failure kills millions of people. However, the supply of donated organs is insufficient to meet the needs of patients seeking transplantation. In 2021,During 2022, we announced an expansion ofmade significant progress in our organ printing development program, including our workwhich we are conducting together with a key strategic partner. This program was first established in 2017 and combines our legacy 3D printing expertise, as well as new capabilities in human tissue engineering from our acquisition of Volumetric Biotechnologies, Inc. ("Volumetric") in 2021, with the regenerative medicine and biotechnology expertise of our partner. To date, our program has had a focusfocused on developing the capability to print scaffolds for human lungs, with a long-term goal of allowing all patients with end-stage lung disease to receive transplants which will enable them to enjoy long and active lives. Based upon the progress made toward this goal, the program washas been expanded to include two additional human organs.
Our second strategy involves the application ofutilizing our bio-printing technology to manufacture non-organ human tissue scaffolds for use in transplantation and surgical reconstruction applications. We are focused onbelieve that continued progress in this area could result in significantly improved health outcomes for patients as well as open up attractive new growth markets and therapeutic applications for 3D printed, vascularized soft-tissue scaffolds. During 2022, we pursued this strategy as an internal development often in conjunctionprogram that combines our legacy 3D printing capabilities with strategic or development partners, of applications that combine our bio-printing and materials expertise that we have gained through our Volumetric acquisition, as well as through our work on the human lung program with the application expertise of our partners.development partner.
Our third regenerative medicine strategy extendsseeks to utilize our bio-printing technologies into research labs, providing advanced printing systemscapabilities to design and unique biological materials to thosemanufacture 3D-printed vascularized “organs-on-chips” for use in drug development by pharmaceutical industry customers. Currently, drug development is an expensive and time-consuming process, and many drug therapies that advance the science of medicine.appear promising during pre-clinical trials fail during human clinical trials. We believe our ability to print high-precision, three-dimensional vascularized cellular structuresthat “organs-on-chips” can be used inaccelerate the drug development process and reduce the cost of pre-clinical drug testing, as well as reduce the pharmaceutical industry’s reliance on animal testing. During 2022, we formed a number of research areas such as the development of new more effective drug therapies.
To support our regenerative medicine efforts, in December 2021 we acquired Volumetric, awholly-owned biotech company whose mission iscalled Systemic Bio in order to develop the ability to manufacture human organs using bioprinting methods and the underlying technologies required to create these highly complex biological structures. This acquisition is expected to supplement and expandaccelerate our existingprogress in this area. Systemic Bio will combine 3D Systems’ legacy expertise in high-resolution 3D printing with advanced capabilities in bioprinting and regenerative medicine. In addition, in Maybiomaterials gained from our 2021 we announced the acquisition of Allevi, a developerInc. to design and market 3D-printed, vascularized “organs-on-chips” for sale to pharmaceutical industry customers. We plan to provide internal funding to support Systemic Bio during the early stages of bioprinting solutions, comprising of bioprinters, biomaterials,its growth, including for activities such as R&D facility expansion, product development and specialized laboratory software.customer acquisition.
Products
We offer our customers a comprehensive range of 3D printers, materials, software, and digital design tools.
3D Printers and Materials
Our 3D printers transform digital data input generated by 3D design software, Computer Aided Design (“CAD”) software or other 3D design tools, into printed parts using several unique print engines that employ proprietary, additive layer by layer building processes with a variety of materials. As part of our solutions orientedsolutions-oriented strategy, we offer a broad range of 3D printing technologies including Stereolithography (SLA), Selective Laser Sintering, Direct Metal Printing, MultiJet Printing, ColorJet Printing, polymer extrusion, and extrusion and SLA based bioprinting. Our printers utilize a wide range of materials, the majority of which are proprietary materials that we develop, blend, and market. Our comprehensive range of materials includes plastic, nylon, metal, composite, elastomeric, wax, polymeric dental materials and biocompatible materials. We augment and complement our portfolio of engineered materials with materials that we purchase or develop with third parties under private label and distribution arrangements.
We work closely with our customers to optimize the performance of our materials in their applications. Our expertise in materials science and formulation, combined with our processes, software and equipment, enables us to provide unique solutions and help our customers select the material that best meets their needs with optimal cost and performance results.
As part of our solutions approach, our currently offered printers, with the exception of direct metal printers and bioprinters, have built-in intelligence to make them integrated, closed systems. For these integrated printers, we furnish materials specifically designed for use in those printers, which are packaged in smart cartridges and utilize material delivery systems. These integrated materials are designed to enhance system functionality, productivity, reliability and materials' shelf life, in addition to providing our customers with a built-in quality management system and a fully integrated workflow solution.
For our bioprintingbio-printing solutions, we also offer research protocols that include bioink,bio-ink, consumable and reagent recommendations. These protocols cover pre-print preparation of cells and biomaterials, 3D printing parameter setting, and post-print processes. Our protocols are utilized by research organizations to run experiments, share research findings, and enhance the utilization of our bioprinters.
Software and Related Products
We provide digital design tools, including software, scanners and haptic devices. We offer solutions for product design, simulation, mold and die design, 3D scan-to-print, reverse engineering, production machining, metrology, inspection and manufacturing workflows. These products are designed to enable a seamless workflow for customers and are marketed under brand names such as Geomagic®. We also offer 3D Sprint and 3DXpert, proprietary software to prepare and optimize CAD data and manage the additive manufacturing processes. These software products provide automated support building and placement, build platform management, print simulation and print queue management capabilities. The outcome is the ability to improve the quality of prints, optimize design structure, shorten design to manufacturing lead time and minimize manufacturing costs.
Since the acquisition of Oqton, Inc. ("Oqton") in 2021, we have also offered an intelligent, cloud-based MOS platform to customers that need to integrate a broad range of advanced manufacturing and automation technologies, including additive manufacturing (AM) solutions, in their production workflows. As part of our broader software strategy, we are working to integrate 3D System’s legacy stand-alone software applications into Oqton’s legacy MOS, so that we can offer our customers a complete cloud-based software solution to automate and control their entire digital manufacturing process from order to delivery.
For our bioprinters, we offer Bioprint Pro as a software solution that allows researchers to design and bioprint repeatable experiments. Bioprint Pro includes experiment-based workflows, basic CAD modeling, and optimized biomaterial presets.
Services
Maintenance and Training Services
We provide a variety of customer services, local application support and field support on a worldwide basis for our products, including installation of new printers at customers’ sites, maintenance agreements, periodic hardware upgrades and software updates. We also provide services to assist our customers and partners in developing new applications for our technologies to facilitate the use of our technology for specific applications, to train customers on the use of our printers and to maintain our printers at customers’ sites. We provide these services, spare parts and field support either directly or through a network of reseller partners. We employ customer-support sales engineers to support our worldwide customer base, and we seek to continue to strengthen and enhance our partner network and service offerings.
Our 3D printers are sold with a warranty period ranging from 90 days to one year. After the warranty period, we generally offer service contracts that enable our customers to continue service and maintenance coverage. These service contracts are offered with various levels of support and options, and are priced accordingly. One entitlement of our service contracts is our service engineers provide regularly scheduled preventive maintenance visits to customer sites. Additionally, we provide training to our partners to enable them to also perform these services. Another contract entitlement on select printer models is proactive remote troubleshooting capability through our 3DConnect Service IoT platform. From time to time, we also offer upgrade kits for certain of our printers that enable our existing customers to take advantage of new or enhanced printer capabilities. In some cases, we have discontinued upgrade support and maintenance agreements for certain of our older legacy printers.
Advanced Manufacturing
As part of our strategy to help customers adopt additive manufacturing, we offer advanced manufacturing services through facilities in the Americas and EMEA regions. These facilities supplement customer manufacturing environments by allowing them to test and ramp production using our solutions before transitioning production to their environment.environment and also providing them with flexible manufacturing capacity on an as-needed basis. This allows us to provide application and production expertise and refine the production process as part of our solutions approach. As the process is validated and volumes ramp, customers may choose to move production to their facilities using equipment, materials, software and services that they purchase from us. These facilities operate under stringent quality systems and are also utilized by customers in regulated industries such as healthcare and aerospace & defense for sustained outsourced production of
hundreds of thousands of parts per year.
Software Services
In addition to our software license products, we offer software maintenance and cloud-software subscriptions, which includes updates and support for our licensed software products. Our licensed software is sold with a maintenance service that generally covers a period of one year. After this initial period, we offer single and multi-year maintenance contracts that enable our customers to continue coverage. These software service contracts typically include free software updates and various levels of technical support. In addition, we offer OqtonOqton's legacy MOS as a cloud based-manufacturing operating system designed to automate digital production workflows and to enable machine monitoring, end-to-end manufacturing visibility and production traceability. For our cloud subscription solutions, customer support and software updates are included as part of the solution.
Healthcare Solutions Services
As part of our precision healthcare solutions services, we provide surgical planning, modeling, prototyping and manufacturing services. We offer printing and finishing of medical and dental devices, anatomical models and surgical guides and tools, as well as modeling, design and planning services, including VSP™ surgical planning solutions.
Global Operations
We operate in the Americas, EMEA and APAC regions, and market our products and services in those areas as well as to other parts of the world.
In maintaining operations outside the United States (the “U.S.”), we expose our business to risks inherent in such operations, including currency exchange rate fluctuations. Information on foreign exchange risk appears in Part I, Item 1A, “Risk Factors,” Part II, Item 7A, “Quantitative and Qualitative Disclosures about Market Risk” and Part II, Item 8, “Financial Statements and Supplementary Data,”Data” of this Form 10-K.
Marketing and Customers
Our Go-to-Market strategy focuses on an integrated approach that is directed at providing comprehensive design to manufacturing solutions meeting the broad spectrum of our customer needs. We utilize a wide range of marketing tools to generate demand and create awareness for our products and services worldwide. Our marketing and communications teams support our demand generation activities by providing marketing campaigns, digital presence and outreach, and event and targeted vertical seminar engagements.
We promote and sell our solutions globally through a direct sales force, channel partners and, in certain geographies, appointed distributors. Our customer success organization includes sales professionals, application engineers, vertical specialists, and other support teams throughout the Americas, EMEA and APAC regions. These teams are responsible for providing complete service to our customers and channel partners from a technical consultation to the sale of our software, printer, and services products.
Our application engineers collaborate closely with our customers to solve complex design and additive manufacturing challenges, leveraging our technology, software, materials and services to develop advanced applications across healthcareour Healthcare Solutions and industrialIndustrial Solutions segments. Additionally, our Customer Innovation Centers provide access to the resources necessary to develop, validate, and commercialize customer applications.
We sell our software solutions, including our Oqton manufacturing operating systemMOS software, through a dedicated software sales team. Our software may be sold to customers with 3D printing equipment from competitive equipment manufacturers and, in some cases, we resell our software through these manufacturers.
Our customers include major companies as well as small and midsize businesses in a broad range of industries, including medical, dental, automotive, aerospace, durable goods, government, defense, technology, jewelry, electronics, education, consumer goods, energy, biotechnology and others. For the years ended December 31, 2022, 2021, 2020, and 2019,2020, one customer accounted for approximately 22%23%, 13%22% and 11%13% of our consolidated revenue, respectively. We expect to maintain our relationship with this customer.
Production and Suppliers
We outsourceIn order to carry out the assembly and refurbishment of our 3D printer assembly and refurbishment activities tohardware, we utilize a combination of in-house operations as well as outsourcing arrangements with selected design, engineering and contract manufacturing companies in the U.S., Switzerland and Belgium. WeIn cases where we utilize outsourcing partners, we purchase finished printers from these suppliers pursuant to forecasts and customer orders that we supply to them. These suppliers also carry out quality control procedures on our printers prior to their shipment to customers. As part of these activities, these suppliers have responsibility for procuring the components and sub-assemblies either from us or third-party suppliers, which are sourced from a geographically diverse mix of countries. While the outsourced suppliers of our printers have responsibility for the supply chain and inventory of components for the printers they assemble, the components, parts and sub-assemblies that are used in our printers are generally available from several potential suppliers. During 2022, we in-sourced the manufacturing of multiple printing platforms from contract manufacturing partners in order to realize improvements in production quality, cost efficiency, and inventory management.
We produce materials at our facilities in Rock Hill, South Carolina, Marly, Switzerland and Soesterberg, Netherlands. We also have arrangements with third parties who blend certain materials according to our specifications that we sell under our own brand names, and we purchase certain complementary materials from third parties for resale to our customers.
Our equipment assembly and materials blending activities, advanced manufacturing services and certain research and developmentR&D activities are subject to compliance with applicable federal, state and local provisions regulating the storage, use and discharge of materials into the environment. Our facilities engaged in such activities are subject to periodic compliance audits by applicable regulatory authorities. We believe that we are in compliance, in all material respects, with such regulations as currently in effect, and we expect continued compliance with them will not have a material adverse effect on our capital expenditures, results of operations or consolidated financial position.
As a company with global operations, we are subject to the laws of the U.S. and multiple foreign jurisdictions in which we operate and the rules and regulations of various governing bodies, which may differ among jurisdictions. Compliance with these laws, rules and regulations has not had, and is not expected to have, a material effect on our capital expenditures, results of operations or competitive position as compared to prior periods.position.
Research and Development
The 3D printing industry continues to experience rapid technological change and developments in hardware, software and materials. Consequently, we have ongoing research and developmentR&D programs to develop new products and to enhance our portfolio of products and services, as well as to improve and expand the capabilities of our solutions. Our efforts are often augmented by development arrangements with research institutions, including universities, customers, suppliers, assembly and design firms, engineering companies, materials companies, governments and other partners.
We are also engaged in various research and developmentR&D efforts related to regenerative medicine. These efforts include the application of 3D printing technologies to the development of transplantable organs and non-organ human applications. These efforts are expected to result in new products that we will market directly or in conjunction with development or channel partners.
In addition to our internally developed technology platforms, we have acquired products and technologies developed by others by acquiring business entities that held ownership rights to such products and technologies. In other instances, we have licensed or purchased the intellectual property rights of technologies developed by third parties through agreements that may obligate us to pay a license fee or royalty, typically based upon a dollar amount per unit or a percentage of the revenue generated by such products.
Intellectual Property
We regard our technology platforms and materials as proprietary and seek to protect them through copyrights, patents, trademarks and trade secrets. At December 31, 20212022 and 20202021 we held 1,3321,358 and 1,2691,332 patents worldwide, respectively. At December 31, 20212022 and 2020,2021, we had 261360 and 312261 pending patent applications worldwide, respectively. The principal issued patents covering aspects of our various technologies will expire at varying times through the year 2034.
In addition, we are a party to various licenses that have had the effect of broadening the range of the patents, patent applications and other intellectual property available to us.
We have also entered into licensing or cross-licensing arrangements with various companies in the U.S. and other countries that enable those companies to utilize our technologies in their products or that enable us to use their technologies in our products. Under certain of these licenses, we are entitled to receive, or we are obligated to pay, royalties for the sale of licensed products in the U.S. or in other countries. The amount of such royalties was not material to any of our annual results of operations or financial position for the three-year period ended December 31, 2021.2022.
We believe that, while our patents and licenses provide us with a competitive advantage, our success also depends on our marketing, business development, applications know-how and ongoing research and developmentR&D efforts. Accordingly, we believe the expiration of any of the patents, patent applications, or licenses discussed above would not be material to our business or financial position.
Competition
We compete with other suppliers of 3D printers, materials, software and healthcare solutions as well as with suppliers of conventional manufacturing solutions. We compete with these suppliers for customers as well as channel partners for certain of our products. Development of new technologies or techniques not encompassed by the patents that we own or license may result in additional future competition.
Our competitors operate both globally and regionally, and many of them have well-recognized brands and product lines.
We believe principal competitive factors include the functionality and breadth of our technology and materials, process and application know-how, total cost of operation of the solution, product reliability and the ability to provide a complete solution to meet customer needs. We believe that our future success depends on our ability to provide high-quality solutions, introduce new products and services to meet evolving customer needs and market opportunities, and to extend our technologies to new applications. Accordingly, our ongoing research and developmentR&D programs are intended to enable us to continue technology advancement and develop innovative new solutions for the marketplace.
Human Capital
At 3D Systems, our purposemission is to deliver leading additive solutions for industrial and healthcare applications. In support of this purpose, our priority is to invest in our people by focusing on bringing in top talent, providing trainingdevelopment and developmentengagement opportunities to strengthen capabilities and skills,enable a culture of innovation, and ensuring a safe and healthy work environment. As of December 31, 2021, 1,7212022, we had 2,032 full-time and part-time employees, compared to 1,9951,721 full-time and part-time employees as of December 31, 2020, were employed at 3D Systems.2021. None of our U.S. employees are covered by collective bargaining agreements; however, some employees outside the U.S. are subject to local statutory employment and labor arrangements. We have not experienced any material work stoppages and believe that our relations with our employees are satisfactory.
Talent Development & Engagement
Through our operating history and experience with technological innovation, we appreciate the importance of retention, growth, and development of our employees – our employees are key to achieving long-term success. Our goal is to foster a workplace culture and employee experience that drives innovation with purpose, profitable growth, and delivers ‘extraordinary’ to our customers. To do so, we have programs for acquiring strategic talent, developing our teams to build key capabilities and skills, and engaging, motivating, and retaining our employees to do their best work. We regularly survey our employees to seek their feedback in areas such as culture, career development, inclusivity, integrity, and employee success. To address the evolving needs of our business, we perform strategic workforce and succession planning as well as ongoing evaluation of our organizational design, culture, and values.
Diversity, Equity & Inclusion
Employees span the Americas (54%(57%), Europe, Middle East and Africa (36%EMEA (34%), and Asia-Pacific (10%APAC (9%) with approximately 819879 employees located outside the U.S. This global representation promotes diversity of thought, experiences, culture, and backgrounds that enhances our ability to deliver innovative solutions to our customers, in support of our company value to ‘build great teams.’ WeOur talent acquisition, outreach, and community engagement activities focus on attracting top, diverse talent. Upon hire, we are committed to fostering an engaged, diverse, inclusive, safe, and purpose-driven culture where employees have equitable opportunities for success.success and feel a sense of belonging. As we execute our talent management strategy, diversity, equity, and inclusion is aare key elementelements that influencesinfluence our measures of success. We monitor the representation of our global employees across the company.
Compensation & Benefits
We design our compensation programs to be competitive and equitable to support employees in sharing in the success of 3D Systems. We tailor our compensation programs to attract and retain top talent to drive success in our current business priorities and emerging strategies. Additionally, we recognize that employees thrive when they have the resources to meet their needs and the time and support to succeed in their professional and personal lives. In support of this, we offer a wide variety of market competitive benefits to employees around the world. OurThe Compensation Committee of the Board of Directors oversees the design of executive compensation and equity plans, which are designed to align executive pay to the delivery of long-term
shareholder value.
Workplace Health & Safety
We are committed to creating a safe, secure, healthy, and injury-free work environment for our employees, customers, partners,
and visitors. Our focus is on reducing significant safety risks and driving a strong safety culture through communication, awareness, and visible leadership. To assist in achieving this commitment, we provide substantial safety trainings and necessary equipment at all facilities, educating and encouraging our employees to proactively identify and eliminate unsafe actions and conditions. We have specific safety programs in place for those working in potentially high-hazard environments. We monitor injury and illness health and safety metrics across our organization to continually evaluate our safety programs to meet the needs of our teams.
COVID-19
Our top priority is protecting the health and safety of our employees and their families and communities, as we continue to manage our business through the COVID-19 pandemic.communities. Throughout the COVID-19 pandemic, our leadership regularly reviewed and adapted our COVID-19 protocols based on evolving research and guidance.to keep our employees safe. We have reopened our offices and begun business travel, with safety measures in place and in accordance with local guidance. Additionally, we implementedcontinue to offer a hybrid-work program globally, providing more flexibility for employees to work remotely. WeAs we manage our operations, we continue to monitor local transmission ratesthe ongoing impacts of COVID-19, and regulatoryregularly review guidance from international and remain committed to protecting our employees, delivering for our customers, and supporting our communities. We are subject to vaccination and workplace safety protocols of the United States Federal Government Executive Order on Ensuring Adequate COVID Safety Protocols for Federal Contractors, and the COVID-19 Workplace Safety Guidance for Federal Contractors and Subcontractors issued by the Safer Federal Workforce Task Force. In support of a safe work environment, we have a vaccine policy for our U.S. employees, and a visitor policy to ensure those visiting our sites are taking the necessary health and safety precautions.domestic authorities.
Available Information
Refer to our website to learn more about our company culture, code of conduct, values, and sustainability initiatives. Our website address is www.3DSystems.com. The information contained on our website is neither a part of, nor incorporated by reference into, this Form 10-K or any other document that we file with or furnish to the Securities and Exchange Commission (“SEC”). We make available, free of charge through our website, our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, amendments to those reports and other documents that we file with the SEC, as soon as reasonably practicable after we electronically file them with, or furnish them to, the SEC.
Many of our corporate governance materials, including our Code of Conduct, Code of Ethics for Senior Financial Executives and Directors, Corporate Governance Guidelines, current charters of each of the standing committees of the Board of Directors and our corporate charter documents and by-laws are available on our website.
Information about our Executive Officers
The information appearing in the table below sets forth the position or positions held by each of our executive officers and his or her age as of March 1, 2022.16, 2023. All of our executive officers serve at the pleasure of the Board of Directors. There are no family relationships among any of our executive officers or directors.
| | | | | |
| Name and Current Position | Age as of March 1, 202216, 2023 |
| Jeffrey A. Graves | 6061 |
| President and Chief Executive Officer | |
Jagtar NarulaMichael Turner | 5147 |
| Executive Vice President and Chief Financial Officer | |
| Charles W. Hull | 8283 |
| Executive Vice President and Chief Technology Officer for Regenerative Medicine | |
| Andrew M. Johnson | 4748 |
| Executive Vice President, Chief Corporate Development Officer, Chief Legal Officer and Secretary | |
| Menno Ellis | 4950 |
| Executive Vice President, Healthcare Solutions | |
| Reji Puthenveetil | 5354 |
| Executive Vice President, Industrial Solutions | |
David Leigh | 54 |
Executive Vice President, Chief Technology Officer For Additive Manufacturing | |
| Phyllis Nordstrom | 4344 |
Executive Vice President, Chief People and Culture Officer and Chief ComplianceAdministrative Officer | |
| Joseph Zuiker | 58 |
| Executive Vice President of Engineering and Operations | |
Jeffrey A. Graves, President and Chief Executive Officer. Dr. Graves was appointed the Company’s President and Chief Executive Officer in May 2020. Prior to joining the Company, from 2012 to May 2020, Dr. Graves served as Chief Executive Officer, President and Director of MTS Systems Corporation, a global supplier of test, simulation, and measurement systems. From 2005 until 2012, Dr. Graves served as President and Chief Executive Officer of C&D Technologies, Inc., a technology company that produces and markets systems for the power conversion and storage of electrical power. Dr. Graves also held leadership roles with Kemet Corporation, an electronic component manufacturing company, as Chief Operating Officer from 2001 to 2003 and Chief Executive Officer from 2003 to 2005. Previously, he held a number of leadership and technical roles with General Electric, Rockwell Automation and Howmet Corporation. In addition to serving on the Company's Board of Directors, Dr. Graves serves on the board of directors of Hexcel Corporation.
Michael Turner, Executive Vice President and Chief Financial Officer. Mr. NarulaTurner was appointed the Company’s Executive Vice President and Chief Financial Officer in September 2020.August 2022. Mr. Turner served as the Chief Financial Officer of Innovative Chemical Products, a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial markets, from May 2021 until August 2022. Prior to joining Innovative Chemical Products, he was a finance executive at the Company,publicly traded chemical company Albemarle Corporation from April 2015 to May 2021. At Albemarle Corporation, Mr. Narula served as SeniorTurner’s roles included business unit Chief Financial Officer, Finance leader for the Company’s Enterprise Resource Planning implementation, and Vice President of Corporate Strategy and Business Development for Blackbaud, Inc. where heFP&A. Mr. Turner’s 20-plus year finance career also previously led investor relations andincludes financial planning. Additionally, he held finance leadership positions of increasing responsibilityas divisional and corporate controller at Xerox, General ElectricFMC Corporation and with private equity.Polypore International, respectively.
Charles W. Hull, Executive Vice President, Chief Technology Officer for Regenerative Medicine. Mr. Hull is a founder of the Company and has served onas a member of our Board of Directors since 1993.from 1993 to May 2022 when he was designated Director Emeritus. He has served as Chief Technology Officer since 1997, as Executive Vice President since 2000 and as Chief Technology Officer for Regenerative Medicine since 2021. Mr. Hull has also previously served in various other executive capacities at the Company since 1986, including Chief Executive Officer, Vice Chairman of the Board of Directors and President and Chief Operating Officer.
Andrew M. Johnson, Executive Vice President, Chief Corporate Development Officer & Chief Legal Officer and Secretary. Mr. Johnson has served as Executive Vice President, and Chief Legal Officer and Secretary since November 2014.2014 and as Chief Corporate Development Officer since September 2022. He served as Interim President and Chief Executive Officer, Chief Legal Officer and Secretary from October 2015 to April 2016 and as Vice President, General Counsel and Secretary from April 2012 to November 2014. Previously, he served as Assistant General Counsel and Assistant Secretary.
Menno Ellis, Executive Vice President, Healthcare Solutions. Mr. Ellis has served as Executive Vice President, Healthcare Solutions since July 2020. He joined the Company in December 2016 as Senior Vice President, Strategy and Vertical Markets. He served as Senior Vice President and General Manager of the Plastics Business Unit and is now responsible for the Healthcare Solutions group, which encompasses the Dental, Medical and Simulations businesses. Prior to joining the Company, he spent 20 years in management and business consulting services with an emphasis on sustainable, long-term revenue growth.
Reji Puthenveetil, Executive Vice President, Industrial Solutions. Mr. Puthenveetil has served as Executive Vice President, Industrial Solutions since July 2020. Prior to joining the Company, Mr. Puthenveetil spent 25 years as a management consultant for Group Newhouse helping companies, such as Lockheed Martin, Xcel Energy, Kia Motors, and Thales Group. Mr. Puthenveetil's work across multiple industries led to the design of a clear strategy for growth and ensuring organizational capability and alignment for execution.
David Leigh, Executive Vice President, Chief Technology Officer Additive Manufacturing. Dr. Leigh has served as Executive Vice President, Chief Technology Officer for Additive Manufacturing since June 2021. He has more than 30 years of experience in the additive manufacturing industry. Prior to his role with 3D Systems, from January 2019 to May 2021 Dr. Leigh served as the Chief Technology Officer (global) and Chief Operations Officer (North America) for EOS GmbH, an additive manufacturing equipment vendor, and from August 2015 to December 2018 he served as Senior Vice President of Emerging Technologies for Vulcan Labs, a subsidiary of Stratasys, Ltd. Dr. Leigh also founded Harvest Technologies which was a pioneer in end-use parts applications in aerospace and established one of the first AS9100 certified additive manufacturing facilities.
Phyllis Nordstrom, Executive Vice President, Chief People and Culture Officer and Chief ComplianceAdministrative Officer. Ms. Nordstrom has served as Executive Vice President, Chief People and Culture Officer and Chief Compliance Officer since August 2021. Effective December 2022, she was further appointed as the Company’s Chief Administrative Officer. Prior to joining 3D Systems, from May 2016 to July 2021, Ms. Nordstrom was Senior Vice President and Chief Risk & Compliance Officer at MTS Systems Corporation, where she was the leader of business ethics, corporate compliance, corporate sustainability, business ethics,and internal audit and corporate compliance.risk management. Over her 22 year22-year career, Ms. Nordstrom has also held multiple leadership roles at PricewaterhouseCoopers, Target, and US Bank.
Joseph Zuiker, Executive Vice President of Engineering and Operations. Dr. Zuiker has served as Executive Vice President of Engineering and Operations since December 2022. Prior to joining 3D Systems, Dr. Zuiker served as Vice President of Engineering, Operations, and Order Fulfillment for MTS Systems Corporation where he worked from July 2017 until December 2022. Prior to joining MTS Systems, he was Senior Director of Technology for Halliburton Corporation’s Sperry Drilling from September 2011 to July 2016. Dr. Zuiker also worked for General Electric from December 1995 to August 2011 in various roles of increasing responsibility, including General Manager of GE Gasification Technology, General Manager of GE Hydro Technology, and Six Sigma Master Black Belt. He holds a Doctorate in Mechanical Engineering from Rensselaer Polytechnic Institute, a Master of Science degree in Aerospace Engineering from the University of Cincinnati, and a Bachelor of Science degree in Mechanical Engineering from the University of Illinois at Urbana-Champaign.
Item 1A. Risk Factors
You should carefully read the following discussion of significant factors, events and uncertainties when evaluating our business and the forward-looking information contained in this Form 10-K. The events and consequences discussed in these risk factors could materially and adversely affect our business, operating results, liquidity and financial condition. While we believe we have identified and discussed below the key risk factors affecting our business, these risk factors do not identify all the risks we face, and there may be additional risks and uncertainties that we do not presently know or that we do not currently believe to be significant that may have a material adverse effect on our business, performance or financial condition in the future.
Operational & Financial Risk Factors
Our uneven sales cycle makes planning and inventory management difficult and future financial results less predictable.
Our quarterly sales often have reflected a pattern in which a disproportionate percentage of each quarter’s total sales occur towards the end of the quarter, in particular for sales of hardware and software products. This uneven sales pattern makes predicting net revenue, earnings, cash flow from operations and working capital for each financial period difficult, increases the risk of unanticipated variations in our quarterly results and financial condition and places pressure on our inventory management and logistics systems. If predicted demand is substantially greater than orders, there may be excess inventory. Alternatively, if orders substantially exceed predicted demand, we may not be able to fulfill all of the orders received in each quarter and such orders may be canceled. Depending on when they occur in a quarter, developments such as an information systems failure, component pricing movements, component shortages or global logistics disruptions could adversely impact our inventory levels and results of operations in a manner that is disproportionate to the number of days in the quarter affected.
The variety of products that we sell could cause significant quarterly fluctuations in our gross profit margins, and those fluctuations in margins could cause fluctuations in operating income or loss and net income or loss.
We continuously work to expand and improve our products, materials and services offerings, geographic areas in which we operate and the distribution channels we use to reach various target product applications and customers. This variety of products, applications, channels and regions involves a range of gross profit margins that can cause substantial quarterly fluctuations in gross profit and gross profit margins depending upon the mix of product shipments from quarter to quarter. Additionally, the introduction of new products or services may further heighten quarterly fluctuations in gross profit and gross profit margins due to manufacturing ramp-up and start-up costs. We may experience significant quarterly fluctuations in gross profit margins or operating income or loss due to the impact of the mix of products, channels or geographic areas in which we sell our products from period to period.
Our products and services may experience quality problems from time to time that can result in decreased sales and operating margin, product returns, product liability, warranty or other claims that could result in significant expenses and harm to our reputation.
We sell complex hardware and software products, materials and services that can contain undetected design and manufacturing defects or errors when first introduced or as enhancements are released that, despite testing, are not discovered until after the product has been installed and used by customers. Sophisticated software and applications, such as those sold by us, may contain “bugs” that can unexpectedly interfere with the software’s intended operation. Defects may also occur in components and products we purchase from third parties. There can be no assurance we will be able to detect and fix all defects in the hardware, software, materials and services we sell. Failure to do so could result in lost revenue, product returns, product liability, delayed market acceptance of those products and services, claims from distributors, end-users or others, increased end-user service and support costs, and significant warranty claims and other expenses to correct the defects, diversion of management time and attention and harm to our reputation.
Changes in, or interpretation of, tax rules and regulations may impact our effective tax rate and future profitability.
We are a U.S. based, multinational company subject to taxation in multiple U.S. and foreign tax jurisdictions. Our future effective tax rates could be adversely affected by changes in statutory tax rates or interpretation of tax rules and regulations in jurisdictions in which we do business, changes in the amount of revenue or earnings in the countries with varying statutory tax rates, or by changes in the valuation of deferred tax assets and liabilities. The U.S. Tax Cuts and Jobs Act is one such example of legislation that impacts our effective tax rate and tax posture. For additional details see Note 22 to the consolidated financial statements in Item 8 of this Form 10-K.
In addition, we are subject to audits and examinations of previously filed income tax returns by the Internal Revenue Service and other domestic and foreign tax authorities. We regularly assess the potential impact of such examinations to determine the adequacy of our provision for income taxes and have reserved for potential adjustments that we expect may result from the current examinations. We believe such estimates to be reasonable; however, there is no assurance that the final determination of any examination will not have an adverse effect on our operating results and financial position.
Changes in business conditions may cause goodwill and other intangible assets to become impaired.
Goodwill and other intangible assets are subject to an impairment test on an annual basis and when circumstances indicate that an impairment is more likely than not. Such circumstances include a significant adverse change in the business climate or a decision to dispose of a business or product line. We face some uncertainty in our business environment due to a variety of challenges, including changes in customer demand. While we have not recorded an impairment to our goodwill since the third quarter of 2020, we may experience additional unforeseen circumstances that adversely affect the value of our goodwill or intangible assets and trigger an evaluation of the amount of the recorded goodwill and intangible assets. Future write-offs of goodwill or other intangible assets as a result of an impairment in the business could materially adversely affect our results of operations and financial condition.
The COVID-19 pandemic could materially adversely affect our financial condition and results of operations.
The novel strain of the coronavirus identified in China in late 2019 (“COVID-19”) has globally spread throughout other areas such as Asia, Europe, the Middle East, and North America and has resulted in authorities imposing, and businesses and individuals implementing, numerous unprecedented measures to try to contain the virus, such as travel bans and restrictions, quarantines, shelter-in-place/stay-at-home and social distancing orders, and shutdowns. These measures have impacted and may further impact our workforce and operations, the operations of our customers, and those of our respective vendors, suppliers, and partners. Each of the countries in which we operate has been affected by the outbreak and new variants and taken measures to try to contain it. The ultimate impact and efficacy of government measures and potential future measures is currently unknown.
There is continued uncertainty regarding the business impacts from such measures and potential future measures. While we have been able to continue our operations through a combination of work-from-home, social distancing and mandatory vaccinations in certain geographies – policies implemented to comply with government regulations and protect employees, these measures have resulted in reduced workforce availability at some of our sites. Restrictions on our access to customer facilities may impact our ability to meet customer demand and could have a material adverse effect on our financial condition and results of operations, particularly if prolonged. Our customers have experienced, and may continue to experience, disruptions in their operations, which can result in delayed, reduced, or canceled orders, or collection risks, and which may adversely affect our results of operations.
The pandemic has significantly increased economic and demand uncertainty. It is possible that the current outbreak and continued spread of COVID-19 and new variants will continue to cause an economic slowdown. There is a significant degree of uncertainty and lack of visibility as to the extent and duration of any such slowdown or recession. Risks related to a slowdown or recession may harm our long-term ability to do business, adversely affect our sales, costs, results of operations and cash flow. Given the significant economic uncertainty and volatility created by the pandemic, it is difficult to predict the nature and extent of impacts on demand for our products and services. These expectations are subject to change without warning and investors are cautioned not to place undue reliance on them.
The spread of COVID-19 has caused us to continuously evaluate and, in some cases, modify our business practices (including employee travel, employee work locations, cancellation of physical participation in meetings, events and conferences, and social distancing measures), and we may take further actions as may be required by government authorities or that we determine are in the best interests of our employees, customers, partners, vendors, and suppliers. Work-from-home and other measures introduce additional operational risks, including cybersecurity risks, and have affected the way we conduct our product development and testing, customer support, and other activities, which could have an adverse effect on our operations. There is no certainty that such measures will be sufficient to mitigate the risks posed by the virus, and illness and workforce disruptions could lead to unavailability of key personnel and harm our ability to perform critical functions.
We depend on external vendors suppliers and outsourcing partnerssuppliers for the components assembly and spare parts
of for our 3D printers and for chemicals and packaging used in our materials. The ongoing COVID-19 pandemic has caused supplySupply and logistical disruptions that began during the COVID-19 pandemic continue for bothmany of our outsourcing partners and supply chain partners. If these relationships were to terminate or these disruptions worsen, our business could be disrupted while we locate alternative sources of supply and our expenses may increase.
We have outsourced to selected design and manufacturing companies the assembly of our printers. In carrying out these outsourcing activities, we face a number of risks, including, among others, the following:
•The risk that the parties that we retain to perform assembly activities may not perform in a satisfactory manner;
•The risk of disruption in the supply of printers or other products to our customers if such third parties either fail to perform in a satisfactory manner or are unable to supply us with the quantity of printers or other products that are needed to meet then current customer demand;
•The risk of work delays or supply chain disruptions stemming from governmental efforts to contain the COVID-19 pandemic; and
•The risk of insolvency of suppliers, as well as the risks that we face, as discussed below, in dealing with a limited number of suppliers.
We purchase components and sub-assemblies for our printers from third-party suppliers that we provide to our customers as spare parts. Additionally, we purchase raw chemicals and packaging that are used in our materials, as well as certain of those materials, from third-party suppliers.
While there are typically several potential suppliers of parts for our products, we currently choose to use only one or a limited number of suppliers for several of these items, including our lasers, materials and certain jetting components. Our reliance on a single or limited number of suppliers involves many risks, including, among others, the following:
•Potential shortages of some key components;
•Disruptions in the operations of these suppliers;
•Product performance shortfalls; and
•Reduced control over delivery schedules, assembly capabilities, quality and costs.
The COVID-19 pandemic has created sporadic delays on the inbound supply chain at our partners and our own facilities. Additionalfacilities that have not been fully resolved. Continued delays on both inbound and outbound logistics have also created challenges. We continue to identify alternative solutions, but an inability to source from alternative suppliers in a timely manner could impact on our ability to fulfill demand.
While we believe that, if necessary, we can obtain all the components necessary for our spare parts and materials from other manufacturers, we require any new supplier to become “qualified” pursuant to our internal procedures, which could involve evaluation processes of varying durations. Our spare parts and raw chemicals used in our materials production are subject to various lead times. In addition, at any time, certain suppliers may decide to discontinue production of a part or raw material that we use. Any unanticipated change in the sources of our supplies, or unanticipated supply limitations, could increase production or related costs and consequently reduce margins.
If our forecasts exceed actual orders, we may hold large inventories of slow-moving or unusable parts, which could have an adverse effect on our cash flow, profitability and results of operations. Inversely, we may lose orders if our forecast is low and we are unable to meet demand. There is considerable uncertainty on the business impact from current measureslabor and potential future measures to contain the spread of the COVID-19 pandemicsupply limitations on our vendors, suppliers, and partners, especially if such measures are in effect for an extended period of time.partners. If disruptions to global businesses from the pandemic continue or worsen our business could face greater supply chain delays and difficulty shipping or receiving products and materials, whichit could have a material adverse effect on our financial condition and results of operations.
The loss of, continued reduction or substantial decline in revenue from larger clients could have a material adverse effect on our revenues, profitability and liquidity.
We experience revenue concentration with a large customer that represents over 20% of our consolidated revenue. Generally, our contracts do not contain guarantees of minimum duration, revenue levels, or profitability. This customer may terminate theirits contracts or materially reduce theirits requested levels of products or services at any time. The loss of, deterioration of the financial condition of, or a significant change to the business of this customer could have a material adverse effect on our business, financial condition, and results of operations. Additionally, this concentration exposes us to concentrated credit risk, as a significant portion of our accounts receivable may be from a single customer. If we are unable to collect our receivables, or are required to take additional reserves, our results of operations and cash flowsflow from operations will be adversely affected.
If we do not generate net cash flow from operations and if we are unable to raise additional capital, our financial condition could be adversely affected and we may not be able to execute our growth strategy.
We cannot assure you that we will continue to generate cash from operations or identify and secure other potential sources to fund future working capital needs and meet capital expenditure requirements.
If we are unable to generate such cash flow, we may be required to adopt one or more alternatives, such as selling assets, restructuring or incurring additional debt or obtaining additional equity capital on terms that may be onerous or highly dilutive. Our ability to obtain additional capital or refinance any indebtedness will depend on, among other things, the capital markets, our financial condition at such time and the terms and conditions of any such financing or indebtedness. We may not be able to engage in any of these activities or engage in these activities on desirable terms, which could result in a default on our debt obligations.terms.
The lack of additional capital resulting from any inability to generate cash flow from operations or to raise equity or debt financing could force us to substantially curtail or cease operations and would, therefore, have an adverse effect on our business and financial condition. Furthermore, we cannot assure you that any necessary funds, if available, would be available on attractive terms or that they would not have a significantly dilutive effect on our existing stockholders. If our financial condition were to worsen and we become unable to attract additional equity or debt financing or enter into other strategic transactions, we would not be able to execute our growth strategy and we could default on our debt obligations, become insolvent or be forced to declare bankruptcy.
Our business could be adversely impacted in the event of a failure of our information technology infrastructure or adversely impacted by a successful cyber-attack.
We have experienced cyber security threats, threats to our information technology infrastructure and unauthorized attempts to gain access to our sensitive information. Prior cyber-attacks directed at us have not had a material impact on our business or financial results; however, this may not continue to be the case in the future. Cyber security assessment analyses undertaken by us have identified and prioritized steps to fortify our cyber security safeguards. We have and will continue to implement additional security measures and processes which enhance our ability to detect and respond to a cyber-attack. We have increased our cyber breach insurance and implemented company-wide cyber security awareness training as well as dedicated certain personnel to address this threat. Despite the implementation of these safeguards, there can be no assurance that we will adequately protect our information or that we will not experience any future successful attacks. The threats we face vary from attacks common to most industries to more advanced and persistent, highly organized adversaries who target us because of the products and services we provide. If we are unable to protect sensitive information, our customers or governmental authorities could question the adequacy of our threat mitigation and detection processes and procedures. Due to the evolving nature of these security threats, however, the impact of any future incident cannot be predicted.
We may need to expend significant additional resources to modify our cyber security protective measures, to investigate and remediate vulnerabilities or other exposures or to make required notifications, and we may be subject to litigation and financial losses. These costs related to cyber or other security threats or disruptions may not be fully insured or indemnified by other means. Occurrence of any of these events could adversely affect our internal operations, the services we provide to our customers, our financial results or our reputation; or such events could result in the loss of competitive advantages derived from our research and development efforts or other intellectual property or early obsolescence of our products and services.
Our operations could suffer if we are unable to attract and retain key management or other key employees.
Our success depends upon the performance of our senior management and other key personnel. Our senior executive team is critical to the management of our business and operations, as well as to the development and execution of our strategy. When changes occur at our senior management level, as well as for key personnel, we typically incur incremental costs including search costs and relocation costs. High demand exists for senior management and other key personnel (including scientific, technical and sales personnel) in the 3D printing industry, and there can be no assurance that we will be able to attract and retain such personnel. We experience intense competition for qualified personnel.
While we intend to continue to provide competitive compensation packages to attract and retain key personnel and engage in regular succession planning for these positions, some of our competitors for these employees have greater resources and more experience, making it difficult for us to compete successfully for key personnel. If we cannot attract and retain sufficiently qualified technical employees for our research and development and manufacturing operations, we may be unable to develop and commercialize new products or new applications for existing products. Furthermore, possible shortages of key personnel, including engineers, in the regions surrounding our facilities could require us to pay more to hire and retain key personnel, thereby increasing our costs.
Servicing our debt may require a significant amount of cash, and we may not have sufficient cash or the ability to raise the funds necessary to settle conversions of the 0% convertible senior notes due 2026 ("the Notes") in cash, repay the Notes at maturity, or repurchase the Notes as required following a fundamental change.
As of December 31, 20212022, we had $460 million outstanding of the Notes. Our ability to refinance our indebtedness, including the Notes, or to make cash payments in connection with any conversions of the Notes,Notes, depends on our future performance, which is subject to economic, financial, competitive, and other factors beyond our control.Our business may not generate cash flow from operations in the future sufficient to service our debt and make necessary capital expenditures.If we are unable to generate such cash flow, we may be required to adopt one or more alternatives, such as selling assets, restructuring debt, or obtaining additional debt financing or equity capital on terms that may be onerous or highly dilutive.Our ability to refinance our indebtedness will depend on the capital markets and our financial condition at such time.We may not be able to engage in any of these activities or engage in these activities on desirable terms, which could result in a default on our debt obligations.In addition, any of our future debt agreements may contain restrictive covenants that may prohibit us from adopting any of these alternatives.Our failure to comply with these covenants could result in an event of default which, if not cured or waived, could result in the acceleration of our debt.
In the event the conditional conversion feature of the Notes is triggered, holders of Notes will be entitled to convert the Notes at any time during specified periods at their option.If one or more holders elect to convert their Notes, we would be required to settle any converted principal through the payment of cash, which could adversely affect our liquidity.In addition, even if holders do not elect to convert their Notes, we could be required under applicable accounting rules to reclassify all or a portion of the outstanding principal of the Notes as a current rather than long-term liability, which would result in a material reduction of our net working capital.
In addition, holders of the Notes have the right to require us to repurchase all or a portion of their Notes upon the occurrence of a fundamental change (as defined in the applicable indenture governing the Notes) at a repurchase price equal to 100% of the principal amount of the Notes to be repurchased. If the Notes have not previously been converted or repurchased, we will be required to repay such Notes in cash at maturity.
Our ability to make required cash payments in connection with conversions of the Notes, repurchase the Notes in the event of a fundamental change, or to repay or refinance the Notes at maturity will depend on market conditions and our future performance, which is subject to economic, financial, competitive, and other factors beyond our control. We also may not use the cash proceeds we raised through the issuance of the Notes in an optimally productive and profitable manner. As a result, we may not have enough available cash or be able to obtain financing at the time we are required to repurchase or repay the Notes or pay cash with respect to Notes being converted.
Business Strategy Risk Factors
We have made, and may make in the future, strategic acquisitions and divestitures that may involve significant risks and uncertainties. We may not realize the anticipated benefits of past or future acquisitions and integration of these acquisitions may disrupt our business and divert management attention. Likewise, our potential future divestitures may be unsuccessful and negatively impact our business.
From time to time, we evaluate acquisition candidates that fit our business objectives. Acquisitions involve certain risks and uncertainties, including, among others, the following:
•Difficulty in integrating newly acquired businesses and operations in an efficient and cost-effective manner, which may also impact our ability to realize the potential benefits associated with the acquisition;
•The risk that significant unanticipated costs or other problems associated with integration may be encountered;
•The challenges in achieving strategic objectives, cost savings and other anticipated benefits;
•The risk that our marketplaces do not evolve as anticipated and that the technologies acquired do not prove to be those needed to be successful in the marketplaces that we serve;
•The risk that we assume significant liabilities that exceed the limitations of any applicable indemnification provisions or the financial resources of any indemnifying party;
•The inability to maintain a relationship with key customers, vendors and other business partners of the acquired businesses;
•The difficulty in maintaining controls, procedures and policies during the transition and integration;
•The potential loss of key employees of the acquired businesses;
•The risk of diverting management attention from our existing operations;
•Difficulties in coordinating geographically disparate organizations and corporate cultures and integrating management personnel with different business backgrounds;
•The potential failure of the due diligence process to identify significant problems, liabilities or other challenges of an acquired company or technology;
•The risk that we incur significant costs associated with such acquisition activity that may negatively impact our operating results before the benefits of such acquisitions are realized, if at all;
•The entry into marketplaces where we have no or limited direct prior experience and where competitors have stronger marketplace positions;
•The exposure to litigation or other claims in connection with our assuming claims or litigation risks from terminated employees, customers, former shareholders or other third parties; and
•The risk that historical financial information may not be representative or indicative of our results as a combined company.
Historically, we have grown organically and from acquisitions, and we intend to continue to grow in such manner. Our infrastructure will require, among other things, continued development of our financial and management controls and management information systems, management of our sales channel, continued capital expenditures, the ability to attract and retain qualified management personnel and the training of new personnel. We cannot be sure that our infrastructure, systems, procedures, business processes and managerial controls will be adequate to support the growth in our operations. Any delays in, or problems associated with, implementing, or transitioning to, new or enhanced systems, procedures, or controls to accommodate and support the requirements of our business and operations and to effectively and efficiently integrate acquired operations may adversely affect our ability to meet customer requirements, manage our product inventory, and record and report financial and management information on a timely and accurate basis. These potential negative effects could prevent us from realizing the benefits of an acquisition transaction or other growth opportunity.
Likewise, we have in the past, and may in the future, divest certain business operations. Divestitures involve a number of risks, including the diversion of management's attention, significant costs and expenses, goodwill and other intangible asset impairment charges, the loss of customer relationships and cash flow, and the disruption of operations in the affected business. Failure to timely complete or consummate a divestiture may negatively affect valuation of the affected business or result in restructuring charges.
In the event of an unsuccessful acquisition or divestiture, our competitive position, revenues, results of operations and financial condition could be adversely affected.
We believe that our future success depends on our ability to deliver products and services that meet changing technology and customer needs.
Our business may be affected by rapid technological change, changes in user and customer requirements and preferences, frequent new product and service introductions embodying new technologies and the emergence of new standards and practices, any of which could render our existing products and proprietary technology obsolete. Accordingly, our ongoing research and development programs are intended to enable us to maintain technological leadership. We believe that to remain competitive we must continually enhance and improve the functionality and features of our products, services and technologies. However, there is a risk that we may not be able to:
•Develop or obtain leading technologies useful in our business;
•Enhance our existing products;
•Develop new products, services and technologies that address the increasingly sophisticated and varied needs of prospective customers, particularly in the area of printer speeds and materials functionality;
•Respond to technological advances and emerging industry standards and practices on a cost-effective and timely basis; or
•Recruit or retain key technology employees.
If we are unable to meet changing technology and customer needs, our competitive position, revenue, results of operations and financial condition could be adversely affected.
The success of our regenerative medicine efforts depends on developing and commercializing products, either ourselves or in conjunction with development partners, that are subject to technical and market risks.
Our regenerative medicine business requires us to develop products that enable the application of additive manufacturing to human organ transplantation and other non-organ human applications. These initiatives may require significant investment and technical achievement of viable product candidates may not be achieved. Our development efforts remain subject to risks including but not limited to unanticipated technical or other hurdles to commercialization. Any products developed through our research efforts are subject to safety, regulatory and efficacy risks that may result in delays to commercialization, cause us to incur additional expenses or fail to achieve commercialization. In addition, any products that achieve commercialization and regulatory approval are subject to market risks including reimbursement from third-party payers and competition from existing or new products that aim to address similar indications.
Regulatory, Legislative and Legal Risk Factors
We are subject to U.S. and other anti-corruption laws, trade controls, economic sanctions and similar laws and regulations. Our failure to comply with these laws and regulations could subject us to civil, criminal and administrative penalties and harm our reputation.
Doing business on a worldwide basis requires us to comply with the laws and regulations of the U.S. government and various foreign jurisdictions. These laws and regulations place restrictions on our operations, trade practices, partners and investments.
In particular, our operations are subject to U.S. and foreign anti-corruption and trade control laws and regulations, such as the Foreign Corrupt Practices Act (“FCPA”) and United Kingdom Bribery Act (the “Bribery Act”), export controls and economic sanctions programs, including those administered by the U.S. Treasury Department’s Office of Foreign Assets Control (“OFAC”), the State Department's Directorate of Defense Trade Controls (“DDTC”) and the Bureau of Industry and Security (“BIS”) of the Department of Commerce. As a result of doing business in foreign countries and with foreign customers, we are exposed to a heightened risk of violating anti-corruption and trade control laws and sanctions regulations.
As part of our business, we may deal with state-owned business enterprises, the employees of which are considered foreign officials for purposes of the FCPA’s prohibition on providing anything of value to foreign officials for the purposes of obtaining or retaining business or securing any improper business advantage. In addition, the provisions of the Bribery Act extend beyond bribery of foreign public officials and also apply to transactions with individuals that a government does not employ. Some of the international locations in which we operate lack a developed legal system and have higher than normal levels of corruption. Our continued expansion outside the U.S., including in Brazil, China, India and developing countries, and
our development of new partnerships worldwide, could increase the risk of FCPA, OFAC or Bribery Act violations in the future.
As an exporter, we must comply with various laws and regulations relating to the export of products and technology from the U.S. and other countries having jurisdiction over our operations. In the U.S., these laws include the International Traffic in Arms Regulations (“ITAR”) administered by the DDTC, the Export Administration Regulations (“EAR”) administered by the BIS and trade sanctions against embargoed countries and destinations administered by OFAC. The EAR governs products, parts, technology and software which present military or weapons proliferation concerns, so-called “dual use” items, and ITAR governs military items listed on the United States Munitions List. Prior to shipping certain items, we must obtain an export license or verify that license exemptions are available. Any failures to comply with these laws and regulations could result in fines, adverse publicity and restrictions on our ability to export our products, and repeat failures could carry more significant penalties.
Violations of anti-corruption and trade control laws and sanction regulations are punishable by civil penalties, including fines, denial of export privileges, injunctions, asset seizures, debarment from government contracts and revocations or restrictions of licenses, as well as criminal fines and imprisonment and could harm our reputation, create negative shareholder sentiment and affect our share value. We have established policies and procedures designed to assist our compliance with applicable U.S. and international anti-corruption and trade control laws and regulations, including the FCPA, the Bribery Act and trade controls and sanctions programs administered by OFAC, the DDTC and BIS, and have trained our employees to comply with these laws and regulations. However, there can be no assurance that all of our employees, consultants, agents or other associated persons will not take actions in violation of our policies and these laws and regulations. Additionally, there can be no assurance that our policies and procedures will effectively prevent us from violating these regulations in every transaction in which we may engage or provide a defense to any alleged violation. In particular, we may be held liable for the actions that our joint venture partners take inside or outside of the United States, even though our partners may not be subject to these laws. Such a violation, even if our policies prohibit it, could have an adverse effect on our reputation, business, financial condition and results of operations. In addition, various state and municipal governments, universities and other investors maintain prohibitions or restrictions on investments in companies that do business with sanctioned countries, persons and entities, which could adversely affect our reputation, business, financial condition and results of operations.
We disclosed potential violations of U.S. export controls laws to the U.S. federal government that resulted in multiple investigations. We have implemented compliance processes and procedures to identify and prevent potential future violations of export control laws, trade sanctions, and government contracting laws and regulations, and continue to review our government contracting compliance risks and potential violations. Failure to comply with the terms of our settlement agreements with the Administrative Agreement or the commencementU.S. Departments of State, Commerce, and Justice could have a separate action by another governmental agency would result in decreased revenuesmaterial and additional harm to our reputation and otherwise adversely affectadverse impact on our business, operating results of operations and financial condition.condition, and, even if we comply with those settlement agreements, the costs and burdens of compliance could be significant, and we may face additional investigations and proceedings from other governmental entities or third parties related to the same or similar conduct underlying the agreements.
In October 2017, we received an administrative subpoena from BISthe Bureau of Industry and Security of the Department of Commerce (“BIS”) requesting the production of records in connection with possible violations of U.S. export control laws, including with regard to our former Quickparts.com, Inc. subsidiary. In addition, while collecting information responsive to the above-referenced subpoena, our internal investigation identified potential violations of ITARthe International Traffic in Arms Regulations administered by DDTCthe Directorate of Defense Trade Controls of the Department of State (“DDTC”) and potential violations of the Export Administration Regulations administered by the BIS.
On June 8, 2018 and thereafter, we submitted voluntary disclosures to BIS and DDTC identifying numerous potentially unauthorized exports between 2012 and 2017, including to China, of controlled items including technical data. As part of our ongoing review of trade compliance risks and our cooperation with the government, on November 20, 2019, we submitted to OFAC an initial notice of voluntary disclosure regarding potential violations of economic sanctions related to Iran. We continued to investigate this issue and filed final disclosures with OFAC on May 20, 2020 and December 21, 2021.We have and will continue to implement compliance enhancements to our export controls, trade sanctions, and government contracting compliance program to address the issues identified through our ongoing internal investigation and will cooperate with DDTC and BIS, as well as the U.S. Departments of Justice, Defense, Homeland Security and Treasury in their ongoing reviews of these matters. In connection with these ongoing reviews,matters, in August 2020, the Companywe received two federal grand jury subpoenas issued by the U.S. District Court for the Northern District of Texas. The Company responded to these two subpoenas and will continue to fully cooperate with the U.S. Department of Justice (“DOJ“) in the related investigation.
Although we cannot predictOver the ultimate resolution ofpast several months, the Company engaged in settlement discussions with DDTC, BIS, and DOJ to settle the potential export control violations described above. On February 27, 2023, the Company settled these matters we have incurredwith all three agencies. See Note 23, “Commitments and expectContingencies,” to continue to incur significant legal costsour consolidated financial statements included in Part II, Item 8, “Financial Statements and other expenses in connection with responding to the U.S. government agencies.Supplementary Data” of this Form 10-K for additional information.
19Compliance with the terms of these agreements, which impose remedial measures such as a Special Compliance Officer to monitor the Company’s export compliance programs, could continue to impose significant costs and burdens on us. If we fail to comply with the terms of these agreements, DDTC, BIS and/or DOJ may impose substantial monetary penalties, which could have a material adverse effect on our business, financial condition and results of operations.
Since 2018, we have implemented new compliance procedures to identify and prevent potential violations of export controls laws, trade sanctions, and government contracting laws and regulations and created a Compliance Committee of the Board of Directors to further enhance board oversight of compliance risks. As we continue to implement additional compliance enhancements, we may discover additional potential violations of export controls laws, trade sanctions, and/or government contracting laws in the future. If we identify any additional potential violations, we will submit voluntary disclosures to the relevant agencies and cooperate with such agencies on any related investigations.
If the U.S. government finds that However, if we have violatedadditional violations of one or more export controlscontrol laws, trade sanctions, or government contracting laws, we could be subject to various civil or criminal penalties. By statute, these penalties, can include but are not limited to fines, which by statute may be significant denialcompliance, litigation or settlement costs, other losses, or a diversion of export privileges,management’s attention from other business concerns and suspension or debarment from participation in U.S. government contracts.have a material adverse effect on our business, results of operations and financial condition. We may also be subject to contract claims based upon such violations. Any assessment of penalties or other liabilities incurred in connection withnegative publicity related to these matters that could harm our reputation, reduce demand for our solutions and customer relationships, create negative investor sentiment,services, result in employee attrition and affectnegatively impact our share value. In connection with any resolution, we may also be required to undertake additional remedial compliance measures and program monitoring. We cannot at this time predict when the U.S. government agencies will conclude their investigations or determine an estimated cost, if any, or range of costs, for any penalties, fines or other liabilities to third parties that may be incurred in connection with these matters.stock price.
We derive a significant portion of our revenue from business conducted outside the U.S. and are subject to the risks of doing business outside the U.S.
We face many risks inherent in conducting business activities outside the U.S. that, unless managed properly, may adversely affect our profitability, including our ability to collect amounts due from customers. While most of our operations outside the U.S. are conducted in highly developed countries, our operations could be adversely affected by, among others, the following:
•Unexpected changes in laws, regulations and policies of non-U.S. governments relating to investments and operations, as well as U.S. laws affecting the activities of U.S. companies abroad;
•Changes in regulatory requirements, including export controls, tariffs and embargoes, other trade restrictions, competition, corporate practices and data privacy concerns;
•Political policies, political or civil unrest, terrorism or epidemics and other similar outbreaks;
•Fluctuations in currency exchange rates;
•Limited protection for the enforcement of contract and intellectual property rights in some countries;
•Difficulties in staffing and managing foreign operations;
•Operating in countries with a higher incidence of corruption and fraudulent business practices;
•Potentially adverse changes in taxation;
•The impact of public health epidemics on employees and the global economy; and
•Other factors, depending upon the specific country in which we conduct business.
These uncertainties may make it difficult for us and our customers to accurately plan future business activities and may lead our customers in certain countries to delay purchases of our products and services. More generally, these geopolitical, social and economic conditions could result in increased volatility in global financial markets and economies.
The consequences of terrorism or armed conflicts are unpredictable, and we may not be able to foresee events that could have an adverse effect on our market opportunities or our business. We are uninsured for losses and interruptions caused by terrorism, acts of war and similar events.
While the geographic areas outside the U.S. in which we operate are generally not considered to be highly inflationary, our foreign operations are sensitive to fluctuations in currency exchange rates arising from, among other things, certain intercompany transactions that are generally denominated, for example, in U.S. dollars rather than their respective functional currencies.
Moreover, our operations are exposed to market risk from changes in interest rates and foreign currency exchange rates and commodity prices, which may adversely affect our results of operations and financial condition. We seek to minimize these risks through regular operating and financing activities and, when we consider it to be appropriate, through the use of derivative financial instruments. However, our efforts to minimize our exposure to market risks from changes in interest rates, foreign currency exchange rates and commodity prices may prove to be insufficient or unsuccessful.
We may incur substantial costs enforcing or acquiring intellectual property rights and defending against third-party claims as a result of litigation or other proceedings.
In connection with the enforcement of our own intellectual property rights, the acquisition of third-party intellectual property rights or disputes related to the validity or alleged infringement of third-party intellectual property rights, including patent rights, we have been, and may in the future be, subject to claims, negotiations or complex, protracted litigation. Intellectual property disputes and litigation may be costly and can be disruptive to our business operations by diverting attention and energies of management and key technical personnel, and by increasing our costs of doing business. Although we have successfully defended or resolved past litigation and disputes, we may not prevail in any ongoing or future litigation and disputes, which could adversely affect our results of operations and financial condition.
Third-party intellectual property claims asserted against us could subject us to significant liabilities, require us to enter into royalty and licensing arrangements on unfavorable terms, prevent us from assembling or licensing certain of our products, subject us to injunctions restricting our sale of products, cause severe disruptions to our operations or the marketplaces in which we compete or require us to satisfy indemnification commitments with our customers, including contractual provisions under various license arrangements. In addition, we may incur significant costs in acquiring the necessary third-party intellectual property rights for use in our products. Any of these could seriously harm our business.
We may not be able to protect our intellectual property rights and confidential information, including our digital content, from third-party infringers or unauthorized copying, use or disclosure.
Although we defend our intellectual property rights and endeavor to combat unlicensed copying and use of our digital content and intellectual property rights through a variety of techniques, preventing unauthorized use or infringement of our rights (“piracy attacks”) is inherently difficult. If our intellectual property becomes subject to piracy attacks, our business may be harmed.
Additionally, we endeavor to protect the secrecy of our digital content, confidential information and trade secrets. If unauthorized disclosure of our trade secrets occurs, we could potentially lose trade secret protection. The loss of trade secret protection could make it easier for third parties to compete with our products by copying previously confidential features, which could adversely affect our business, results of operations, revenue and operating margins. We also seek to protect our confidential information and trade secrets through the use of non-disclosure agreements. However, there is a risk that our confidential information and trade secrets may be disclosed or published without our authorization, and in these situations it may be difficult and/or costly for us to enforce our rights.
Material weaknesses in our internal control over financial reporting could result in material misstatements in our financial statements not being prevented or detected, which could affect investor confidence in the accuracy and completeness of our financial statements and could negatively impact on our stock price and financial condition.
As a public company, we are required to comply with Section 404 of the Sarbanes-Oxley Act. If we fail to abide by the applicable requirements of Section 404, regulatory authorities, such as the SEC, could subject us to sanctions or investigation, and our independent registered public accounting firm may not be able to certify as to the effectiveness of our internal control over financial reporting pursuant to an audit of our internal controls. Even effective internal controls can provide only reasonable assurance with respect to the preparation and fair presentation of financial statements. Accordingly, our internal control over financial reporting may not prevent or detect misstatements because of their inherent limitations, including the possibility of human error, the circumvention or overriding of controls, or fraud.
DuringManagement, including our Chief Executive Officer and Chief Financial Officer, assessed the preparationeffectiveness of our financial statements for the period ended December 31, 2020, management identified two material weaknesses in ourCompany’s internal control over financial reporting relatedas of December 31, 2022. Based on its assessment, management has concluded that the Company did not maintain effective internal control over financial reporting as of December 31, 2022, due to a lackthe following two material weaknesses.
We did not design or maintain effective controls in response to the risks of certainmaterial misstatement, including designing and maintaining formal accounting policies, procedures, and controls or improper executionover significant accounts and disclosures to achieve complete, accurate and timely financial accounting, reporting and disclosures, with respect to: (1) revenue, receivables and deferred revenue, including the input of designed control procedures, (1) for certain non-standard contracts and non-standardexecuted contract terms into the Company’s information systems that perform revenue recognition and (2) over the review of internally prepared reports and analyses utilized in the financial closing process. These combination of control deficiencies were partially related to employee turnover, resulting in a temporary shortage of personnel with appropriate knowledge or skills to perform an effective review during our financial statement close process. In addition, certain control deficiencies related to the completeness and review of transactions that were infrequent in nature. These control deficiencies could have resulted in a misstatement of accounts and disclosures that could have resultedAlthough these material weaknesses did not result in a material misstatement of our annual or interim consolidated financial statements that would not have been preventedfor the periods presented, there is a possibility they could lead to a material misstatement of account balances or detected.disclosures. Accordingly, management has determinedconcluded that these control deficiencies constitute material weaknesses.
During the preparation of our financial statements for the period ended December 31, 2021, management completed its assessment of the effectiveness of our internal controls over financial reporting and concluded that the two previously identifiedThe material weaknesses had not been fully remediated, although the number of control deficiencies that resulted in these material weaknesses had been reduced. An additional material weakness wasdescribed above were initially identified relating to the calculation of the Company's
provision for income taxes, including for material non-routine transactions. The control deficiencies outstanding at December 31, 2021 were partially related2020 and continued to employee training, resulting in a lack of knowledge or skill level to properly execute the designed controls or perform an effective review over certain manual controls related to the financial statement close process. In addition, certain control deficiencies related to the timely review of transactions that were infrequent in nature.
exist at December 31, 2022. As further described in Item 9A, Management's Report on Internal Control over Financial Reporting, we began implementing a remediation plan in January 2021 designed to improve our internal control over financial reporting through the development and implementation of more formal policies, processes and documentation procedures relating to our financial reporting, the hiring of additional accounting personnel, and the training of new personnel and existing personnel in new roles on proper execution of designed control procedures. In 2021, we engaged outside consultants to advise on changes in the design of our controls and procedures and to advise on technical accounting matters. In continuation of this remediation plan and to address the additional tax material weakness, in 2022, we plan to hire additional staff with appropriate accounting, finance, operational and technology knowledge and experience in the design and execution of controls, redesign ineffective controls or processes, implement software to enhance our financial close and reporting and tax processes as well as establish a formal controls governance committee.
While we believe our remediation plans described above should remediate the material weaknesses, we cannot provide assurance of when the material weaknesses will be remediated, nor can we be certain of whether additional actions will be required or the costs of any such actions. Moreover, we cannot provide assurance that additional material weaknesses will not arise in the future. While the material weaknesses discussed in Item 9A, Management's Report on Internal Control over Financial Reporting, did not result in material misstatements of our annual or interim consolidated financial statements, any failure to remediate the material weaknesses, or the identification of new material weaknesses in our internal control over financial reporting, could result in material misstatements in our financial statements that may continue undetected, negatively impacting the public perception of the Company and our securities and cause us to fail to meet our reporting and financial obligations or incur significant additional costs to remediate the material weaknesses, each of which could negatively affect our stock price, harm our ability to raise capital on favorable terms in the future or otherwise have a negative impact on our financial condition.
General Risk Factors
Our common stock price has been and may continue to be volatile.
The market price of our common stock has experienced, and may continue to experience, considerable volatility. Between January 1, 2020 and December 31, 2021, the trading price of our common stock has ranged from a low of $4.60 per share to a high of $56.50 per share. Numerous factors could have a significant effect on the price of our common stock, including those described or referred to in this “Risk Factors” section of this Form 10-K, as well as, among other things:
•Our perceived value in the securities markets;
•Overall trends in the stock market;
•Announcements of changes in our forecasted operating results or the operating results of one or more of our competitors;
•The impact of changes in our results of operations, our financial condition or our prospects;
•Market conditions for providers of products and services such as ours;
•Executive level management uncertainty or change;
•Changes in recommendations or revenue or earnings estimates by securities analysts; and
•Announcements of acquisitions by us or one of our competitors.
Item 1B. Unresolved Staff Comments
None.
Item 2. Properties
Our headquarters are located in Rock Hill, South Carolina. As of December 31, 2021,2022, we own minimal facilities and we lease approximately 1.01.1 million square feet, in the U.S (624(725 thousand square feet), EMEA (302(311 thousand square feet) and APAC (28(47 thousand square feet). The Healthcare Solutions segment accounted for approximately 252198 thousand square feet, while the industrialIndustrial Solutions segment accounted for approximately 457223 thousand square feet. Approximately 300662 thousand square feet are mixed use facilities.
Item 3. Legal Proceedings
Information relating to legal proceedings is included under the header "Litigation" in Note 23 to the consolidated financial statements in Item 8 of this Form 10-K, which is incorporated by reference into this Item 3.
Item 4. Mine Safety Disclosures
Not applicable.
PART II
Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Our common stock is listed on the New York Stock Exchange (“NYSE”) under the trading symbol “DDD.”
As of February 23, 2022,March 7, 2023, our outstanding common stock was held by approximately 1,5031,523 stockholders of record. This figure does not reflect the beneficial ownership of shares held in a nominee's name.
Dividends
We do not currently pay, and have not paid, any dividends on our common stock, and we currently intend to retain any future earnings for use in our business. Any future determination as to the declaration of dividends on our common stock will be made at the discretion of the Board of Directors and will depend on our earnings, operating and financial condition, capital requirements, and other factors deemed relevant by the Board of Directors, including the applicable requirements of the Delaware General Corporation Law, which provides that dividends are payable only out of surplus or current net profits.
The payment of dividends on our common stock may be restricted by the provisions of credit agreements or other financing documents that we may enter into or the terms of securities that we may issue from time to time. Currently, no such agreements or documents limit our declaration of dividends or payments of dividends.
Issuance of Unregistered Securities and Issuer Purchases of Equity Securities
We did not repurchase any of our equity securities in the open market during the year ended 2021,2022; however, shares of common stock were surrendered to us for payment of tax withholding obligations in connection with the vesting of restricted stock awards and units pursuant to our Amended and Restated 2015 Incentive Stock Plan. For information regarding the securities authorized for issuance under our equity compensation plans, see “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters–Equity Compensation Plans” in Item 12 of this Form 10-K. Also, see Note 18 to the consolidated financial statements in Item 8 of this Form 10-K. We did not engage in any unregistered sales of equity securities in 2021.
Issuer purchases of equity securities
| | | | | | | | | | | | | | |
| Total number of shares (or units) purchased | | Average price paid per share (or unit) | |
| October 1, 2021 - October 31, 2021 | 14,885 | | | $ | 27.67 | | |
| November 1, 2021 - November 30, 2021 | 15,650 | | | 24.33 | | |
| December 1, 2021 - December 31, 2021 | 67,252 | | | 21.54 | | |
| Total | 97,787 | | a | $ | 22.92 | | b |
| | | | | | | | | | | | | | |
| Total number of shares (or units) purchased | | Average price paid per share (or unit) | |
| October 1, 2022 - October 31, 2022 | 12,470 | | | $ | 8.53 | | |
| November 1, 2022 - November 30, 2022 | 6,401 | | | 10.56 | | |
| December 1, 2022 - December 31, 2022 | 67,575 | | | 7.92 | | |
| Total | 86,446 | | a | $ | 8.20 | | b |
a.Represents shares of common stock surrendered to us for payment of tax withholding obligations in connection with the vesting of restricted stock.stock awards and units.
b.The average price paid reflects the average market value of shares withheld for tax purposes.
23Issuances of Unregistered Securities
On October 4, 2022, we completed the acquisition of dp polar GmbH, a German corporation (“dp polar”), pursuant to a Stock Purchase Agreement, dated as of August 5, 2022, between the Company and the shareholders of dp polar. As part of the consideration with respect to the closing of the acquisition, after customary closing adjustments, the Company issued 794,988 shares of the Company’s Common Stock to shareholders of dp polar for an aggregate stock consideration value of $7.3 million. The shares of Common Stock were issued in a transaction undertaken in reliance on Section 4(a)(2) of Securities Act of 1933, as amended (the “Securities Act”), and/or Rule 506 of Regulation D promulgated under the Securities Act. An additional payment of $2.2 million via the issuance of 249,865 shares of Common Stock is possible upon the continued employment of a certain key individual from dp polar through October 4, 2024. The issuance of the shares of the Company’s Common Stock was exempt from registration because the issuance did not involve a public offering and each shareholder of dp polar that received shares of Common Stock in the transaction agreed to lock-up provisions of at least one year and acknowledged that such shares of Common Stock may not be offered, sold, pledged, assigned or transferred unless a registration statement with respect thereto is effective under the Securities Act and applicable state securities laws or an exemption from registration exists.
Stock Performance Graph
The graph below shows, for the five years ended December 31, 2021,2022, the cumulative total return on an investment of $100 assumed to have been made on December 31, 20162017 in our common stock. For purposes of the graph, cumulative total return assumes the reinvestment of all dividends. The graph compares such return with those of comparable investments assumed to have been made on the same date in (a) the NYSE Composite Index, and (b) the S&P Small-Cap 600 Information Technology Index, which are published market indices with which we are sometimes compared.
Although total return for the assumed investment assumes the reinvestment of all dividends on December 31 of the year in which such dividends were paid, we paid no cash dividends on our common stock during the periods presented.
COMPARISON OF 5-YEAR CUMULATIVE TOTAL RETURN
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | December 31, 2016 | | December 31, 2017 | | December 31, 2018 | | December 31, 2019 | | December 31, 2020 | | December 31, 2021 |
| 3D Systems Corporation | | $ | 100 | | | $ | 65 | | | $ | 77 | | | $ | 66 | | | $ | 79 | | | $ | 162 | |
| NYSE Composite Index | | 100 | | | 119 | | | 108 | | | 136 | | | 146 | | | 176 | |
| S&P Small-Cap 600 Information Technology Index | | 100 | | | 110 | | | 100 | | | 140 | | | 179 | | | 227 | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | December 31, 2017 | | December 31, 2018 | | December 31, 2019 | | December 31, 2020 | | December 31, 2021 | | December 31, 2022 |
| 3D Systems Corporation | | $ | 100 | | | $ | 118 | | | $ | 101 | | | $ | 121 | | | $ | 249 | | | $ | 86 | |
| NYSE Composite Index | | 100 | | | 91 | | | 115 | | | 123 | | | 148 | | | 134 | |
| S&P Small-Cap 600 Information Technology Index | | 100 | | | 91 | | | 127 | | | 162 | | | 206 | | | 160 | |
Item 6. Reserved
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following discussion and analysis should be read together with the selected consolidated financial data and our consolidated financial statements and notes thereto included in Item 8 of this Form 10-K. Certain statements contained in this discussion may constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These statements involve a number of risks, uncertainties and other factors that could cause actual results to differ materially from those reflected in any forward-looking statements, as discussed more fully in this Form 10-K. See “Forward-Looking Statements” and “Risk Factors” in Part I, Item 1A.1A and “Forward-Looking Statements”. All amounts are in thousands, except share and per share amounts, or as otherwise indicated.
For discussion related to the results of operations and changes in financial condition for fiscal 20202021 compared to fiscal 2019,2020, refer to Part II, Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations in our fiscal 20202021 Form 10-K. Our fiscal 2021 Form 10-K which was filed with the SEC on March 5, 2021.1, 2022.
Business Overview
3D Systems Corporation (“3D Systems” or the “Company” or “we,” "our" or “us”) markets our products and services through subsidiaries in North America and South America (collectively referred to as “Americas”), Europe and the Middle East (collectively referred to as “EMEA”) and the Asia Pacific and Oceania region (collectively referred to as “APAC”). We provide comprehensive 3D printing and digital manufacturing solutions, including 3D printers for plastics and metals, materials, software, and digital design tools. Our solutions support advanced applications in two key industry verticals: Healthcare Solutions and Industrial Solutions. We have over 35 years of experience and expertise, which have proven vital to our development of an ecosystem and end-to-end digital workflow solutions that enable customers to optimize product designs, transform workflows, bring innovative products to market and drive new business models.
The Company has two reportable segments, Healthcare Solutions and Industrial Solutions.
Overview and Strategy
In May 2020, our Chief Executive Officer and President, Dr. Jeffrey Graves, was hired. Dr. Graves undertook an initial assessment of the Company and developed the purpose statement to be the leader in enabling additive manufacturing solutions for applications in growing markets that demand high reliability products. He announced a four-phased plan to enable this vision: reorganize into two key industry verticals (Healthcare Solutions and Industrial)Industrial Solutions), restructure to gain efficiencies, divest non-core assets, and invest for future growth.
As part of our strategic plan, we have organized into two key verticals. This structure allows us to align our solution-orientedapplication-oriented approach with deep industry and customer knowledge. Our two key verticals span a range of industries. Healthcare Solutions includes dental, medical devices, personalized health services and regenerative medicine. Our Industrial Solutions vertical includes aerospace, defense, transportation and general manufacturing. We architect solutions specific to customers’ needs through a combination of materials, hardware platforms, software, professional services and advanced manufacturing – creating a path to integrating additive manufacturing into traditional production environments. As a result, manufacturers achieve design freedom, increase agility, scale production and improve overall total cost of operation. Our technologies and process knowledge enable hundreds of thousands of production parts to be made through additive manufacturing each day.
WeIn conjunction with our four-phased plan, we completed our initial restructuring efforts in the second quarter of 2021. Cost reduction efforts have included reducing the number of facilities and examining every aspect of our manufacturing and operating costs. However, given the current macroeconomic challenges, we continue to look for ways to manage costs. In the second quarter of 2022, we notified one of our printer assembly outsourcing partners of our intent to terminate the manufacturing services arrangement and in-source our printer assembly and production process, as we believe this is an opportunity to improve customer delivery and reduce costs. The exit agreement was finalized in July 2022 and resulted in a $1.7 million exit fee that we paid in the third quarter of 2022, as well as the purchase of $23.9 million of inventory and $0.4 million of fixed assets from the assembly manufacturer. Part of the inventory purchased was prepaid during previous quarters for $8.9 million, resulting in a net payment of $17.1 million in July 2022.
Divestitures (see Note 4 to the Consolidated Financial Statements for further details)
In conjunction with our four-phased plan, we divested parts of our business that did not align with our strategic focus on additive manufacturing. The divestitures were completed in 2021, with net proceeds totaling $451.2 million. In January 2021, we sold Cimatron Ltd., which operated our Cimatron integrated CAD/CAM software for the tooling business and its GibbsCAM CNC programming software business, for $64.2 million.business. In August 2021, we sold our Simbionix line of surgical simulators for $305.0 million, and insimulators. In September 2021, we sold our On Demand Manufacturing ("ODM") business for $82.0 million. All sale amounts are before customary closing adjustments.
We have now completedbusiness. These divestitures represent the completion of our planned divestitures of non-core assets and are focused onas part of the strategic growth of our core additive manufacturing business.plan noted above.
AcquisitionsAcquisitions/Investments (See Note 3 to the Consolidated Financial Statements for further details)
The last phase of the plan is to invest in growth. Once the restructuring phase and the divestitures of non-core assets were complete, the Company made several acquisitions and investments.
On November 1, 2021,October 4, 2022, we acquired Oqton, Inc. (“Oqton”), for $188.2 million, excluding customary closing adjustments. We paid $107.5 million in cashcompleted the acquisition of dp polar, a German-based designer and issued 2,552,904 sharesmanufacturer of the Company’s Common Stock. The acquisition’s near term impact on the Company’s resultsindustry’s first additive manufacturing system designed for true high-speed mass production of operations and cash flows are expected to be dilutive. Oqton's operating results will be reported in the Industrial segment.
On December 1, 2021, we acquired Volumetric Biotechnologies, Inc. (“Volumetric”),customized components, for $40.2$26.7 million, of which $24.8$19.6 million was paid in cash and the remainder was paid via the issuance of 720,022the Company’s common stock. An additional payment of $2.2 million via the issuance of 249,865 shares of the Company’s common stock is possible upon the continued employment of a certain key individual from dp polar through October 4, 2024. Central to dp polar’s patented continuous printing process is a large-scale, segmented, rotating print platform that eliminates the start/stop operations of virtually all additive manufacturing platforms. With dp polar’s technology and patented polar coordinate control, the print heads remain stationary above the rotating platform, providing a continuous print process. The acquisition’s near-term impact on the Company’s results of operations and cash flows is expected to be dilutive.
On April 1, 2022, we completed the acquisition of 93.75% of Kumovis for an all-cash purchase price of $37.7 million. $3.6 million of the purchase price is deferred for up to fifteen months from the closing date. Kumovis, which is part of the Healthcare Solutions segment, utilizes polyether ether keton or “PEEK” materials, which have properties that lend it to many medical applications, including many implant applications, that fit into our personalized healthcare solutions operations. The acquisition’s near-term impact on the Company’s results of operations and cash flows is expected to be dilutive.
On April 1, 2022, we completed the acquisition of 100% of Titan for an all-cash purchase price of $39.0 million. Titan, which is part of the Industrial Solutions segment, is a pellet-based extrusion platform that addresses customer applications requiring large build volumes, superior performance, and improved productivity at significantly lower cost. We believe the acquisition of Titan will open up new markets in the Industrial Solutions segment. The acquisition’s near-term impact on the Company’s results of operations and cash flows is expected to be dilutive.
In March 2022, the Saudi Arabian Industrial Investments Company ("Dussur") and 3D Systems signed an agreement to form a joint venture intended to expand the use of additive manufacturing within the Kingdom of Saudi Arabia and surrounding geographies, including the Middle East and North Africa. The joint venture is to enable the development of Saudi Arabia's domestic additive manufacturing production capabilities, consistent with the Kingdom’s ‘Vision 2030,’ which is focused on diversification of the economy and long-term sustainability. Once the joint venture is formed, 3D Systems will own approximately 49% and is committed to an initial investment of about $6.5 million, of which $3.4 million has been deposited in an escrow account and is reported as restricted cash within other assets on the balance sheet as of December 31, 2022. Use of the amount deposited in escrow is limited to funding the Company's common stock.initial investment in the joint venture, and such amount is expected to be deposited into a bank account of the joint venture for use in its operations or to pay outstanding liabilities upon legal formation. Additional future investments are contingent upon the achievement of certain milestones by the joint venture. The impact on the Company’s financial position, results of operations and cash flows is not expected to be material other than the cash outflow(s) related to the initial and contingent investments.
In March 2022, we made a $10.0 million investment for an approximate 26.6% ownership interest in Enhatch, the developer of the Intelligent Surgery Ecosystem. We simultaneously entered into a collaboration and supply agreement with Enhatch. We also obtained warrants to purchase additional shares of Enhatch and the right to purchase, in the future, the remaining shares of Enhatch that 3D Systems does not own if certain revenue targets are achieved. Enhatch's Intelligent Surgery Ecosystem provides technologies which streamline and scale the design and delivery of patient-specific medical devices by automating the process. Incorporating these capabilities into 3D Systems’ workflow for patient-specific solutions, which includes advanced software, expert treatment planning services, custom implants, instrumentation design, and industry-leading production processes, will help more efficiently meet the growing demand for personalized medical devices.
During the third quarter of 2022, the Company recorded an impairment charge of $2.8 million related to the carrying value of its investment in Enhatch. This impairment charge was the result of lower than projected revenues recognized by Enhatch during the quarter, as well as a reduction to near-term forecasted revenues due to a delay in receiving certain regulatory approvals. In addition, the carrying value of the Enhatch warrants, which are required to be recorded at their fair value as of the end of each quarter, was reduced from $0.3 million to $0.2 million. The Company has recorded the impairment charge related to its Enhatch investment, as well as the change in the value of the Enhatch warrants, within interest and other income (expense), net on the statement of operations for the year ended December 31, 2022.
On December 1, 2021, we acquired Volumetric for $40.2 million. Additional payments of up to $355.0 million are possible which are linked toupon (1) the attainment of severalseven non-financial milestones, througheach of which requires achievement prior to either December 31, 2030 andor December 31, 2035, and (2) the continued employment of certain key individuals from Volumetric. AnyVolumetric’s mission is to develop the ability to manufacture human organs using bioprinting methods and the underlying technologies required to create these highly complex biological structures. With this acquisition, we expanded our capabilities and capacity in 3D printing related to bio-printing and regenerative medicine. Combining 3D Systems' regenerative medicine group with Volumetric’s highly complementary skill sets of biological expertise and cellular engineering is expected to accelerate our core regenerative medicine strategies which include the bio-printing of human organs, additional payments made will be paid approximately half in cashnon-organ applications and half in shares of the Company’s common stock. The additional payments are considered compensation expense which will be recorded ratably from the time a milestone is deemed is probable of achievement to the estimated date of achievement. Any compensation expense recorded will be reversed if the milestone is no longer probable of achievement. Volumetric will be part of the Healthcare reporting unit and segment.bio-printing technologies for research labs. The acquisition’s near-
termnear-term impact on the Company's results of operations and cash flows has been dilutive. Volumetric's operating results are expectedreported in the Healthcare Solutions segment.
On November 1, 2021, we acquired Oqton for $187.8 million. Oqton is a software company that creates an intelligent, cloud-based MOS platform tailored for flexible production environments that increasingly utilize a range of advanced manufacturing and automation technologies, including additive manufacturing solutions, in their production workflows. The cloud-based solution leverages the Industrial Internet of Things, artificial intelligence, and machine learning technologies to bedeliver a solution for customers to automate their digital manufacturing workflows, scale their operations and enhance their competitive position. The Oqton acquisition will allow the Company to expand its existing additive manufacturing software suite to the entire additive industry. Oqton's operating results are reported in the Industrial Solutions segment and the acquisition’s impact on the Company’s financial position, results of operations and cash flows has been dilutive.
In May 2021, we purchased Allevi, Inc. to expand regenerative medicine initiatives into medical and pharmaceutical research and development laboratories. Additionally, in June 2021, we closed the acquisition of a German software firm, Additive Works GmbH (“Additive”). Additive expands the simulation capabilities for rapid optimization of industrial-scale 3D printing processes. The purchase price for both acquisitions, individually and combined, and the impacts to the Company’s financial position, results of operations and cash flows are not material.
COVID-19 Pandemic Response
Our top priority is the healthoffices are currently open and safety of our employees and their families and communities, as we continue to manage our business through the COVID-19 pandemic. Throughout this past year, our leadership regularly reviewed and adapted our COVID-19 protocols based on evolving research and guidance. We have reopened our offices and begun business travel has resumed, with safety measures in place and in accordance with local guidance. Additionally,However, we implemented a hybrid-work program globally, providing more flexibility for employees to work remotely. We continue to monitor local transmission rates and regulatoryreview guidance from international and domestic authorities regarding COVID-19 and remain committed to protecting our employees, delivering for our customers, and supporting our communities. We are subject to vaccination and workplace safety protocols of the United States Federal Government Executive Order on Ensuring Adequate COVID Safety Protocols for Federal Contractors, andIf the COVID-19 Workplace Safety Guidance for Federal Contractors and Subcontractors issued by the Safer Federal Workforce Task Force. In support of a safe work environment, we have a vaccine policy for our U.S. employees, and a visitor policy to ensure those visiting our sites are taking the necessarypandemic resurges, governmental authorities may reimpose health and safety precautions.
2021 Summary
| | | | | | | | | | | | | | |
| Year Ended December 31, | |
| (in thousands, except per share amounts) | 2021 | | 2020 | |
| Revenue: | | | | |
| Products | $ | 428,742 | | | $ | 332,799 | | |
| Services | 186,897 | | | 224,441 | | |
| Total revenue | 615,639 | | | 557,240 | | |
| Cost of sales: | | | | |
| Products | 245,169 | | | 220,415 | | |
| Services | 106,692 | | | 113,450 | | |
| Total cost of sales | 351,861 | | | 333,865 | | |
| Gross profit | 263,778 | | | 223,375 | | |
| Operating expenses: | | | | |
| Selling, general and administrative | 227,697 | | | 219,895 | | |
| Research and development | 69,150 | | | 74,143 | | |
| Impairment of goodwill | — | | | 48,300 | | |
| | | | |
| Total operating expenses | 296,847 | | | 342,338 | | |
| Loss from operations | $ | (33,069) | | | $ | (118,963) | | |
On August 5, 2020, we announced,requirements that could restrict or prevent normal business activities. Refer to “Risk Factors” in connection with the new strategic focus and organizational realignment,Part I, Item 1A for a restructuring plan intended to align our operating costs with current revenue levels and better position the Company for future sustainable and profitable growth. See Note 25 in Item 8 of this Form 10-K.
Total consolidated revenue for the year ended December 31, 2021 increased 10.5% or $58.4 million, despite divesting non-core businesses in 2021, to $615.6 million, compared to $557.2 million for the year ended December 31, 2020, driven by growth in the Healthcare segment.
Revenue from Healthcare increased 24.2% to $306.2 million for the year ended December 31, 2021, compared to $246.4 million for the year ended December 31, 2020, driven by strong demand for dental applications partly offset by the impact of 2021 divestitures. Industrial sales decreased 0.4% to $309.5 million for the year ended December 31, 2021, compared to $310.8 million for the year ended December 31, 2020, primarily due to the impact of 2021 divestitures, partly offset by continued strengtheningdiscussion of the economy in 2021.
Gross profit forrisks to our business if the year ended December 31, 2021 increased by 18.1%, or $40.4 million,COVID-19 pandemic was to $263.8 million, compared to $223.4 million for the year ended December 31, 2020. Gross profit margin for the years ended December 31, 2021 and 2020 was 42.8% and 40.1%, respectively. The increase in gross profit margin was primarily a result of prior year end of life inventory charges and cost optimization expenses, as well as better absorption of supply chain overhead in 2021 resulting from higher production.
Operating expenses for the year ended December 31, 2021 decreased by 13.3%, or $45.5 million, to $296.8 million, compared to $342.3 million for the year ended December 31, 2020 primarily due to significantly lower cost optimization expenses in 2021 and a goodwill impairment charge incurred in 2020, with no similar goodwill impairment in 2021. Selling, general and administrative ("SG&A") expenses for the year ended December 31, 2021 increased by 3.5%, or $7.8 million, to $227.7 million, compared to $219.9 million for the year ended December 31, 2020, primarily due to higher incentive compensation resulting from better than expected performance in 2021 compared to internal targets, a one-time $9.8 million bonus paid to Simbionix employees in connection with the divestiture, investments in the business, increase in stock compensation expenses, and expenses related to acquisitions, partially offset by a decrease in cost optimization expenses. Research and development ("R&D") expenses for the year ended December 31, 2021 decreased by 6.7%, or $5.0 million, to $69.2 million, compared to $74.1 million for the year ended December 31, 2020, primarily due to divestitures and cost savings from the prior year restructuring program. In 2020, we recorded a non-cash goodwill impairment charge of $48.3 million compared to no impairment charge in 2021. See Note 11 to the consolidated financial statements in Item 8 of this Form 10-K for additional discussion.resurge.
Our operating loss for the year ended December 31, 2021 was $33.1 million, compared to an operating loss of $119.0 million for the year ended December 31, 2020. The lower loss was driven by higher revenue and gross profit dollars, benefits from the 2020 cost optimization plan, and the absence of a goodwill impairment charge and reduced cost optimization expenses in 2021, partly offset by higher net SG&A expenses as noted above.
Background
ResultsWe earn revenue from the sale of Operations for 2021products and 2020services through our Healthcare Solutions and Industrial Solutions segments. The product categories include 3D printers and corresponding materials, healthcare simulators (which was divested in third quarter of 2021),digitizers, software licenses, 3D scanners and haptic devices. The majority of materials used in our 3D printers are proprietary. The services category includes maintenance contracts and services on 3D printers and simulators, software maintenance, software as a service subscriptions, on-demand solutions (which was divested in the third quarter of 2021) and healthcare solutions services.
Comparison of revenue
Current year revenue has improved as the prior year was negatively impacted by the effects of the COVID-19 pandemic, most severely during the first half of 2020, as many of our customers were shutdown or on a significantly reduced level of activity, partially offset by the impact of divestitures. Additionally, givenGiven the relatively high price of certain 3D printers and a corresponding lengthy selling cycle, as well as relatively low unit volume of the higher pricedhigher-priced printers in any particular period, a shift in the timing and concentration of orders and shipments from one period to another can materially affect reported revenue in any given period.
In addition to changes in sales volumes, there are three other primary drivers of changes in revenue from one period to another: (1) divestitures, (2) the combined effect of changes in product mix and average selling prices (2)and (3) the impact of fluctuations in foreign currencies and (3) the impact of business divested in 2021.currencies. As used in this Management’s Discussion and Analysis, the price and mix effects relate to changes in revenue that are not able to be specifically related to changes in unit volume, divestitures or foreign exchange and divestitures.exchange.
We earn revenue fromSummary of Financial Results for the sale of productsYears Ended December 31, 2022 and services through our Healthcare and Industrial segments. The products categories include 3D printers and corresponding materials, healthcare simulators (which was divested in the third quarter of 2021), digitizers, software licenses, 3D scanners and haptic devices. The services category includes maintenance contracts and services on 3D printers and simulators (which was divested in the third quarter of 2021), software maintenance and cloud-based software subscriptions, on-demand solutions (which was divested in the third quarter of 2021) and healthcare services.2021
The following table sets forth changes in revenue for the years ended December 31, 2021 and 2020. | | | | | | | | | | | | |
| Year Ended December 31, | |
| (in thousands) | 2022 | | 2021 | |
| Revenue: | | | | |
| Products | $ | 395,396 | | | $ | 428,742 | | |
| Services | 142,635 | | | 186,897 | | |
| Total revenue | 538,031 | | | 615,639 | | |
| Cost of sales: | | | | |
| Products | 237,386 | | | 245,169 | | |
| Services | 86,412 | | | 106,692 | | |
| Total cost of sales | 323,798 | | | 351,861 | | |
| Gross profit | 214,233 | | | 263,778 | | |
| Operating expenses: | | | | |
| Selling, general and administrative | 244,181 | | | 227,697 | | |
| Research and development | 87,071 | | | 69,150 | | |
| | | | |
| Total operating expenses | 331,252 | | | 296,847 | | |
| Loss from operations | (117,019) | | | (33,069) | | |
| Interest and other (expense) income, net | (3,790) | | | 352,609 | | |
| (Loss) income before income taxes | (120,809) | | | 319,540 | | |
| (Provision) benefit for income taxes | (2,140) | | | 2,512 | | |
| Net (loss) income before redeemable non-controlling interest | (122,949) | | | 322,052 | | |
| Less: net (loss) attributable to redeemable non-controlling interest | (238) | | | — | | |
| Net (loss) income attributable to 3D Systems Corporation | $ | (122,711) | | | $ | 322,052 | | |
Table 1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| (Dollars in thousands) | Products | | Services | | Total |
| Revenue — 2020 | $ | 332,799 | | | 59.7 | % | | $ | 224,441 | | | 40.3 | % | | $ | 557,240 | | | 100.0 | % |
| Change in revenue: | | | | | | | | | | | |
| Volume | 137,856 | | | 41.4 | % | | 16,386 | | | 7.3 | % | | 154,242 | | | 27.7 | % |
| Divestitures | (26,050) | | | (7.8) | % | | (57,134) | | | (25.5) | % | | (83,184) | | | (14.9) | % |
| Price/Mix | (21,885) | | | (6.6) | % | | 92 | | | — | % | | (21,793) | | | (3.9) | % |
| Foreign currency translation | 6,022 | | | 1.8 | % | | 3,112 | | | 1.4 | % | | 9,134 | | | 1.6 | % |
| Net change | 95,943 | | | 28.8 | % | | (37,544) | | | (16.7) | % | | 58,399 | | | 10.5 | % |
| Revenue — 2021 | $ | 428,742 | | | 69.6 | % | | $ | 186,897 | | | 30.4 | % | | $ | 615,639 | | | 100.0 | % |
Total consolidated revenue increased 10.5%. In additionfor the year ended December 31, 2022 decreased $77.6 million or 12.6% to changes in sales volumes, there are three other primary drivers of changes in revenue from one period$538.0 million, compared to another: (1) the combined effect of changes in product mix and average selling prices, (2) the impact of fluctuations in foreign currencies and 3) the impact of businesses divested in 2021. As used in this Management’s Discussion and Analysis, the price and mix effects relate to changes in revenue that are not able to be specifically related to changes in unit volume, foreign exchange and divestitures. Recurring revenue, which includes service and materials, was $396.9 million and $381.6$615.6 million for the yearssame period last year, primarily driven by divestitures of non-core businesses and the negative impacts of foreign exchange, partially offset by higher sales volumes. Revenue from divested businesses for the year ended December 31, 2021 and 2020, respectively. The increase in recurringwas $71.7 million, foreign exchange negatively impacted revenue in 2021 was primarily due to an increase in material sales volume, partially offset by divestitures.
For the yearsyear ended December 31, 2021 and 2020, products revenue from Healthcare contributed $217.7 million and $159.6 million, respectively, and products revenue from Industrial contributed $211.02022 by $24.1 million, and $173.2higher sales volumes resulted in a $17.0 million respectively. The higher products revenueincrease in Healthcare was primarily due to continued strength in the dental market. The increased products revenue in Industrial was primarily due to higher volumes, favorable price/mix and foreign currency impact, partially offset by divestitures.revenue.
Services revenueConsolidated gross profit
Gross profit for the year ended December 31, 2022 decreased $49.5 million, or 18.8%, to $214.2 million, compared to $263.8 million for the same period last year. Gross profit margin for the year ended December 31, 2022 and 2021 was 39.8% and 42.8%, respectively. The decrease in gross profit is primarily a result of divestitures of $33.5 million, cost inflation, and supply chain pressures.
Consolidated selling, general and administrative expense
Selling, general and administrative ("SG&A") expense for the year ended December 31, 2022 increased $16.5 million, or 7.2%, to $244.2 million, compared to $227.7 million for the same period last year. SG&A expense was impacted by the Company’s acquisitions of Titan, Kumovis, and dp polar during fiscal year 2022, as well as the Company's acquisitions of Volumetric and Oqton during the fourth quarter of 2021, each of which was consolidated for the full year ended December 31, 2022. Collectively, these acquisitions resulted in the recognition of incremental SG&A expense of $28.7 million for fiscal year 2022.This increase in SG&A expense due to acquisitions was partially offset by a $22.9 million decrease in SG&A expense driven by the Company’s divestitures of Simbionix and ODM during fiscal year 2021.
The primary drivers of the $16.5 million increase in SG&A expense for fiscal year 2022 – inclusive of the $5.8 million net increase due to the impacts of the Company’s recent acquisitions and divestitures – include:
| | | | | |
Primary drivers(in thousands) | Increase / (Decrease) |
| Corporate litigation and settlement costs | $19,888 | |
| Volumetric earnout | 14,592 | |
| Amortization | 5,116 | |
| Stock compensation and incentive compensation | (30,280) | |
| Other | 7,168 | |
Corporate litigation and settlement costs increased during fiscal year 2022 primarily due to non-recurring settlement accruals related to various compliance and litigation matters discussed in Note 23 to the consolidated financial statements included in Item 8 of this Form 10-K, as well as the incremental legal costs incurred to address those compliance and litigation matters.
The expense attributable to the Volumetric earnout increased during fiscal year 2022 due to the recognition of a full year of expense in fiscal year 2022 versus a partial year of expense in fiscal year 2021, as the acquisition of Volumetric occurred on December 2021.
Amortization expense increased during fiscal year 2022 due to the recognition of a partial year of amortization related to intangible assets resulting from the fiscal year 2022 acquisitions and the recognition of a full year of amortization related to intangible assets resulting from the fiscal year 2021 acquisitions.
Compensation and other labor costs decreased during fiscal year 2022 primarily due to lower incentive compensation consisting of bonuses and stock-based compensation.
Other drivers of the increase in total SG&A expense for fiscal year 2022 include increased marketing, travel, software and hardware costs.
Consolidated research and development expense
Research and development ("R&D") expense for the year ended December 31, 2022 increased $17.9 million, or 25.9%, to $87.1 million, as compared to $69.2 million for the same period last year. R&D expense was impacted by the Company’s acquisitions of Titan, Kumovis, and dp polar during fiscal year 2022, as well as the Company's acquisitions of Volumetric and Oqton during the fourth quarter of 2021, each of which was consolidated for the full year ended December 31, 2022. Collectively, these acquisitions resulted in the recognition of incremental R&D expense of $11.4 million for fiscal year 2022.This increase in R&D expense due to acquisitions was partially offset by a $6.9 million decrease in R&D expense driven by the Company’s divestiture of Simbionix during fiscal year 2021.
The primary drivers of the $17.9 million increase in R&D expense for fiscal year 2022 – inclusive of the $4.5 million net increase due to the impacts of the Company’s recent acquisitions and divestitures – include:
| | | | | |
Primary drivers (in thousands) | Increase / (Decrease) |
| Compensation and other labor costs | $10,954 | |
| Operating supplies | 4,784 | |
| Other | 2,183 | |
The increases during fiscal year 2022 for compensation and other labor costs and operating supplies are primarily due to expenses from acquired businesses with significant R&D activities, partly offset by the absence of expenses from the divestiture of Simbionix.
Consolidated operating loss
Our operating loss for the year ended December 31, 2022 was $117.0 million, compared to a $33.1 million operating loss for the same period last year, due to lower gross profit and higher SG&A and R&D expenses as discussed above.
Results of Operations for 2022 and 2021
Segments income statements
The following table sets forth our operating results by segment for the years ended December 31, 2022 and 2021:
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| Year Ended December 31, |
| 2022 | | 2021 |
| Healthcare | | Industrial | | Consolidated | | Healthcare | | Industrial | | Consolidated |
| (in thousands) | | | | | | | | | | | |
| Revenue | $ | 260,988 | | | $ | 277,043 | | | $ | 538,031 | | | $ | 306,184 | | | $ | 309,455 | | | $ | 615,639 | |
| Cost of sales | 162,222 | | | 161,576 | | | 323,798 | | | 170,434 | | | 181,427 | | | 351,861 | |
| Gross profit | 98,766 | | | 115,467 | | | 214,233 | | | 135,750 | | | 128,028 | | | 263,778 | |
| Less: | | | | | | | | | | | |
| Segment operating expenses | 72,954 | | | 92,630 | | | 165,584 | | | 66,392 | | | 79,473 | | | 145,865 | |
| Segment operating income | $ | 25,812 | | | $ | 22,837 | | | 48,649 | | | $ | 69,358 | | | $ | 48,555 | | | 117,913 | |
General corporate expense, net(a) | | | | | 165,668 | | | | | | | 150,982 | |
| Operating (loss) | | | | | $ | (117,019) | | | | | | | $ | (33,069) | |
(a)- General corporate expense, net includes expenses not specifically attributable to our segments for functions such as human resources, finance, legal and information technology, including salaries, benefits, and other related costs, company-wide incentive compensation and stock-based compensation.
Revenue
The following table sets forth our revenue by segment for the years ended December 31, 2022 and 2021:
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| Year Ended December 31, | | | | | | | | |
| 2022 | | 2021 | | Change in revenue | | |
| (Dollars in thousands) | Revenue | | % Revenue | | Revenue | | % Revenue | | $ | | % | | | | |
| Healthcare | $ | 260,988 | | | 48.5 | % | | $ | 306,184 | | | 49.7 | % | | $ | (45,196) | | | (14.8) | % | | | | |
| Industrial | 277,043 | | | 51.5 | % | | 309,455 | | | 50.3 | % | | (32,412) | | | (10.5) | % | | | | |
| Total | $ | 538,031 | | | 100.0 | % | | $ | 615,639 | | | 100.0 | % | | $ | (77,608) | | | (12.6) | % | | | | |
For the year ended December 31, 2022, Healthcare Solutions revenue decreased $45.2 million, or 14.8%, to $261.0 million, as compared to $306.2 million for the same period last year primarily due to divestitures, the negative impacts of foreign exchange, and lower sales volumes in the dental market, partially offset by the impact of less severe COVID restrictionshigher volumes and favorable sales price/mix in 2021 and the favorable impact of foreign currency translation.other markets. For the years ended December 31, 2022 and 2021, and 2020, servicesproducts revenue from Healthcare Solutions contributed $88.4$179.4 million and $86.9 million, respectively, and services revenue from Industrial contributed $98.5 million and $137.6$217.7 million, respectively. The higher servicesdecreased products revenue in Healthcare wasSolutions is primarily due to strongthe impact of divestitures of $23.0 million, and lower sales volumes in medical devices,the dental market, partially offset by divestitures. The lower services revenuehigher volumes and favorable sales price/mix in Industrial was due to divestitures, partially offset by the impact of less severe COVID restrictions in 2021.
other markets. For the years ended December 31, 2022 and 2021, and 2020,services revenue from operations outsideHealthcare Solutions contributed $81.6 million and $88.4 million, respectively. The decreased services revenue in Healthcare Solutions is primarily due to the U.S. was 44.6% and 50.6%impact of total revenue, respectively.divestitures of $8.8 million, partially offset by favorable sales price/mix.
For the year ended December 31, 2022, Industrial Solutions revenue decreased $32.4 million, or 10.5%, to $277.0 million as compared to $309.5 million in the same period last year primarily due to divestitures and the negative impacts of foreign exchange partially offset by higher sales volumes. For the years ended December 31, 2022 and 2021, products revenue from Industrial Solutions contributed $216.0 million and $211.0 million, respectively. The increased Industrial Solutions products revenue was primarily due to higher sales volumes, partially offset by the negative impact of foreign exchange. For the years ended December 31, 2022 and 2021, services revenue from Industrial Solutions contributed $61.1 million and $98.5 million, respectively. The decreased services revenue in Industrial Solutions is primarily due to divestitures and the negative impacts of foreign exchange partially offset by higher sales volumes.
The following table sets forth changes in our products and services revenue for the years ended December 31, 2022 and 2021.
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| (Dollars in thousands) | Products | | Services | | Total |
| Revenue — 2021 | $ | 428,742 | | | 69.6 | % | | $ | 186,897 | | | 30.4 | % | | $ | 615,639 | | | 100.0 | % |
| Change in revenue: | | | | | | | | | | | |
| Volume | 6,120 | | | 1.4 | % | | 10,888 | | | 5.8 | % | | 17,008 | | | 2.8 | % |
| Divestitures | (22,965) | | | (5.4) | % | | (48,707) | | | (26.1) | % | | (71,672) | | | (11.6) | % |
| Price/mix | 1,187 | | | 0.3 | % | | — | | | — | % | | 1,187 | | | 0.2 | % |
| Foreign currency translation | (17,688) | | | (4.1) | % | | (6,443) | | | (3.4) | % | | (24,131) | | | (3.9) | % |
| Net change | (33,346) | | | (7.8) | % | | (44,262) | | | (23.7) | % | | (77,608) | | | (12.6) | % |
| Revenue — 2022 | $ | 395,396 | | | 73.5 | % | | $ | 142,635 | | | 100.0 | % | | $ | 538,031 | | | 100.0 | % |
| | | | | | | | | | | |
| | | | | | | | | | | |
For the year ended December 31, 2022, the decrease in products revenue was due to divestitures, and the negative impacts of foreign exchange, partially offset by higher sales volumes and favorable sales price/mix. The decrease in services revenue was due to divestitures and the negative impact of foreign exchange, partially offset by higher sales volumes.
Gross profit and gross profit margins
The following table sets forth our gross profit and gross profit margins by segment:
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| Year Ended December 31, | | | | | | | | |
| 2022 | | 2021 | | Change in Gross Profit | | Change in Gross Profit Margin |
| (Dollars in thousands) | Gross Profit | | Gross Profit Margin | | Gross Profit | | Gross Profit Margin | | $ | | % | | Percentage Points | | % |
| Healthcare | $ | 98,766 | | | 37.8 | % | | $ | 135,750 | | | 44.3 | % | | $ | (36,984) | | | (27.2) | % | | (6.5) | | | (14.7) | % |
| Industrial | 115,467 | | | 41.7 | % | | 128,028 | | | 41.4 | % | | (12,561) | | | (9.8) | % | | 0.3 | | | 0.7 | % |
| Total | $ | 214,233 | | | 39.8 | % | | $ | 263,778 | | | 42.8 | % | | $ | (49,545) | | | (18.8) | % | | (3.0) | | | (7.0) | % |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
For the year ended December 31, 2022, Healthcare Solutions gross profit and gross profit margin decreased compared to the same period last year primarily due to lower sales volumes in the dental market, divestitures of $16.7 million and inflationary cost pressures.
For the year ended December 31, 2022, Industrial Solutions gross profit decreased compared to the same period last year primarily due to divestitures of $16.8 million and inflationary cost pressures, partially offset by an increase in sales volumes.
The following table sets forth our products and services gross profit and gross profit margins for the years ended December 31, 20212022 and 2020.2021.
Table 2
| | | Year Ended December 31, | | | Year Ended December 31, | |
| | 2021 | | 2020 | | Change in Gross Profit | | Change in Gross Profit Margin | | 2022 | | 2021 | | Change in Gross Profit | | Change in Gross Profit Margin |
| (Dollars in thousands) | (Dollars in thousands) | Gross Profit | | Gross Profit Margin | | Gross Profit | | Gross Profit Margin | | $ | | % | | Percentage Points | | % | (Dollars in thousands) | Gross Profit | | Gross Profit Margin | | Gross Profit | | Gross Profit Margin | | $ | | % | | Percentage Points | | % |
| Products | Products | $ | 183,573 | | | 42.8 | % | | $ | 112,384 | | | 33.8 | % | | $ | 71,189 | | | 63.3 | % | | 9.0 | | | 26.6 | % | Products | $ | 158,010 | | | 40.0 | % | | $ | 183,573 | | | 42.8 | % | | $ | (25,563) | | | (13.9) | % | | (2.8) | | | (6.5) | % |
| Services | Services | 80,205 | | | 42.9 | % | | 110,991 | | | 49.5 | % | | (30,786) | | | (27.7) | % | | (6.6) | | | (13.3) | % | Services | 56,223 | | | 39.4 | % | | 80,205 | | | 42.9 | % | | (23,982) | | | (29.9) | % | | (3.5) | | | (8.2) | % |
| Total | Total | $ | 263,778 | | | 42.8 | % | | $ | 223,375 | | | 40.1 | % | | $ | 40,403 | | | 18.1 | % | | 2.7 | | | 6.7 | % | Total | $ | 214,233 | | | 39.8 | % | | $ | 263,778 | | | 42.8 | % | | $ | (49,545) | | | (18.8) | % | | (3.0) | | | (7.0) | % |
|
The increaseFor the year ended December 31, 2022, the decrease in products and services gross profit and gross profit margin wascompared to the same period last year is primarily a result of prior year enddivestitures of life inventory charges$33.5 million, lower sales volumes in the dental market and inflationary cost optimization expenses, as well as better absorption of supply chain overhead in 2021 resulting from higher production,pressures partially offset by the impact of divestitures. See Note 8 to the consolidated financial statements in Item 8 of this Form 10-K for additional discussion.
.Products gross profit increased primarily due to higher sales volume as well as significantly improved capacity utilization and the end-of-life inventory charge of $10.9 million recordedvolumes in 2020. Services gross profit decreased primarily due to the impact of divestitures.non-dental markets.
Operating expenses
The following table sets forth the components ofour operating expenses by segment for the years ended December 31, 20212022 and 2020.2021:
Table 3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| Year Ended December 31, | | | | |
| 2021 | | 2020 | | Change |
| (Dollars in thousands) | Amount | | % Revenue | | Amount | | % Revenue | | $ | | % |
| Selling, general and administrative expenses | $ | 227,697 | | | 37.0 | % | | $ | 219,895 | | | 39.5 | % | | $ | 7,802 | | | 3.5 | % |
| Research and development expenses | 69,150 | | | 11.2 | % | | 74,143 | | | 13.3 | % | | (4,993) | | | (6.7) | % |
| Impairment of goodwill | — | | | — | % | | 48,300 | | | 8.7 | % | | (48,300) | | | (100.0) | % |
| Total operating expenses | $ | 296,847 | | | 48.2 | % | | $ | 342,338 | | | 61.4 | % | | $ | (45,491) | | | (13.3) | % |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| Year Ended December 31, | | | | | | | | |
| 2022 | | 2021 | | Change | | |
| (Dollars in thousands) | Segment operating expenses(a) | | % Revenue | | Segment operating expenses(a) | | % Revenue | | $ | | % | | | | |
| Healthcare | $ | 72,954 | | | 28.0 | % | | $ | 66,392 | | | 21.7 | % | | $ | 6,562 | | | 9.9 | % | | | | |
| Industrial | 92,630 | | | 33.4 | % | | 79,473 | | | 25.7 | % | | 13,157 | | | 16.6 | % | | | | |
| Segment operating expenses | 165,584 | | | 30.8 | % | | 145,865 | | | 23.7 | % | | 19,719 | | | 13.5 | % | | | | |
| General corporate expense, net | 165,668 | | | 30.8 | % | | 150,982 | | | 24.5 | % | | 14,686 | | | 9.7 | % | | | | |
| Total operating expenses | $ | 331,252 | | | | | $ | 296,847 | | | | | $ | 34,405 | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | |
(a) Segment operating expenses increased primarily dueexclude expenses not specifically attributable to higherour segments for functions such as human resources, finance, legal and information technology, including salaries, benefits, and other related costs, company-wide incentive compensation resulting from better than expected performance in 2021 compared to internal targets, a one-time $9.8 million bonus paid to Simbionix employees in connection with the divestiture, investments in the business, increase in stock compensation expenses, and expenses related to acquisitions, partially offset by a decrease in cost optimization expenses. SG&A expenses for 2020 included $20.1 million of restructuring expenses related to our 2020 cost optimization program. See Note 25 to the consolidated financial statements for additional discussion regarding restructuring.
R&D expenses decreased primarily due to divestitures and cost savings from the prior year restructuring program.stock-based compensation.
For the year ended December 31, 2021, there were no impairment charges2022, Healthcare Solutions' operating expenses increased by $6.6 million compared to goodwill. the same period last year. The increase was primarily due to the continued investments in growth initiatives. The impact of acquisitions was materially offset by divestitures.
For the year ended December 31, 2020, we recorded2022, Industrial Solutions' operating expenses increased by $13.2 million primarily due to a non-cash goodwill impairment charge of $48.3$18.9 million related to acquisitions and continued investments in growth initiatives, partially offset by the EMEA reporting unit, that was ultimately
due to the negative impact on the business environment as a result of the COVID-19 pandemic. See Note 11 to the consolidated financial statements in Item 8divestitures of this Form 10-K for additional discussion.$8.4 million.
Loss from operations
The following table sets forth loss from operations for the years ended December 31, 2021, and 2020.
Table 4
| | | | | | | | | | | | | | | | |
| | Year Ended December 31, |
| (Dollars in thousands) | | 2021 | | 2020 | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| Loss from operations: | | $ | (33,069) | | | $ | (118,963) | | | |
The decrease in loss from operations forFor the year ended December 31, 2021, as2022, Corporate operating expenses increased by 14.7 million compared to the prior yearsame period last year. This increase was primarily driven by an increase of $19.9 million attributable to legal costs and the accrual of estimated settlements, an increase of $5.9 million of amortization expense attributable to the Company's fiscal year 2021 and fiscal year 2022 acquisitions, and an increase of $5.0 million attributable to consulting and other professional services costs. The primary offset to the increases in revenue and gross profit, cost savings from the prior year cost optimization program, the absence ofCorporate operating expenses was a goodwill impairment charge and reduced restructuring expenses related to our 2020 cost optimization program and divestitures, partly offset by higher stock and$21.1 million decrease in incentive compensation expenses, as previously discussed.costs that are not allocated to the Company's reportable segments.
See “Comparison ofRevenue,” “Gross profit and gross profit margins” and “Operating expenses” above.
Interest and other (expense) income, (expense), net
The following table sets forth the components of interest and other (expense) income, (expense), net for the years ended December 31, 20212022 and 2020.2021.
Table 5 | | | | | | | | | | | | | | | | |
| | Year Ended December 31, |
| (Dollars in thousands) | | 2021 | | 2020 | | |
| Interest and other income (expense), net | | | | | | |
| Foreign exchange loss | | $ | 1,681 | | | $ | (4,762) | | | |
| Interest expense, net | | (1,902) | | | (3,991) | | | |
| Other income (expense), net | | 352,830 | | | (15,694) | | | |
| Total interest and other expense, net | | $ | 352,609 | | | $ | (24,447) | | | |
| | | | | | | | | | | | | | | | |
| | Year Ended December 31, |
| (in thousands) | | 2022 | | 2021 | | |
| Interest and other (expense) income, net | | | | | | |
| Foreign exchange (loss) gain, net | | $ | (4,424) | | | $ | 1,681 | | | |
| Interest income (expense), net | | 6,541 | | | (1,902) | | | |
| Other (expense) income, net | | (5,907) | | | 352,830 | | | |
| Total interest and other (expense) income, net | | $ | (3,790) | | | $ | 352,609 | | | |
Foreign exchange gain (loss), net, forFor the year ended December 31, 2021,2022, foreign exchange (loss) gain, net, as compared to the priorsame period last year, period, improvedreported a loss due to the favorable movements instrengthening of the EUR/USDU.S. Dollar relative to the Euro, British Pound and GBP/USD exchanges rates.other currencies, which negatively impacted non-U.S. Dollar denominated assets held by U.S. Dollar functional currency entities and U.S. Dollar liabilities held by non-U.S. Dollar functional currency entities.
Interest expense, net, decreased forFor the year ended December 31, 2021,2022, interest income (expense), net increase as compared to the priorsame period last year period primarily due to lowernet interest expense due toearned on short-term investments made using the repayment of the 5-year $100 million senior secured term loan facility (the "Term Facility") in the first quarter of 2021 and interest income related to cash proceeds from the Cimatron, ODM,2021 divestitures and Simbionix divestitures as well as our $460 million convertible notes offering. The year over year benefits fordebt issuance, partially offset by non-cash interest expense related to the convertible notes.
For the year ended December 31, 2021 were partially offset by2022, other income decreased, as compared to the realization of losses previouslysame period last year, due to: (1) the $2.8 million impairment loss related to the Company’s investment in Enhatch being recognized in accumulated other comprehensive loss resulting from the termination of the interest rate swap in the first quarter of 2021.
Other income (expense), net, forduring the year ended December 31, 2021, as compared to2022 and (2) the gain on sale of ODM of $38.5 million, the gain on sale of Simbionix of $273.8 million and the gain on sale of Cimatron of $38.5 million being recognized during the year ended December 31, 2020, increased primarily due to the $350.9 million gain on the divestitures of Cimatron, ODM and Simbionix, including an $8.9 million favorable foreign exchange gain related to the Cimatron and Simbionix divestitures.2021.
Benefit
Net (loss) income
The following table sets forth the net (loss) income for the years ended December 31, 2022, and provision for income taxes 2021.
| | | | | | | | | | | | | |
| Year Ended December 31, | | |
| (in thousands, except per share amounts) | 2022 | | 2021 | | |
| (Loss) income before income taxes | $ | (120,809) | | | $ | 319,540 | | | |
| (Provision) benefit for income taxes | (2,140) | | | 2,512 | | | |
| Net (loss) income before redeemable non-controlling interest | (122,949) | | | 322,052 | | | |
| Less: net (loss) attributable to redeemable non-controlling interest | (238) | | | — | | | |
| Net (loss) income attributable to 3D Systems Corporation | $ | (122,711) | | | $ | 322,052 | | | |
| | | | | |
| Net (loss) income per common share: | | | | | |
| Basic | $ | (0.96) | | | $ | 2.62 | | | |
| Diluted | $ | (0.96) | | | $ | 2.55 | | | |
We recorded a $2.1 million tax provision and a $2.5 million tax benefit and a $6.2 million provision for income taxes for the years ended December 31, 20212022 and 2020,2021, respectively.
In 2022, our provision reflected $0.4 million in U.S. tax benefit and $2.5 million of tax expense in foreign jurisdictions. In 2021, our benefitprovision reflected $6.6 million in U.S. tax benefit and $4.1 million of tax expense in foreign jurisdictions. In 2020, our provision reflected $1.8 million in U.S. tax expense and $4.4 million of tax expense in foreign jurisdictions.
During 20212022 and 2020,2021, we concluded that it is more likely than not that our deferred tax assets will not be realized in certain jurisdictions, including the U.S. and certain foreign jurisdictions; therefore, we have a valuation allowance recorded against our deferred tax assets on our consolidated balance sheets totaling $91.2$100.7 million and $123.1$91.2 million as of December 31, 20212022 and 2020,2021, respectively.
For further discussion, regarding our provision/benefit for income taxes see Note 2 and Note 22 to the consolidated financial statements in Item 8 of this Form 10-K.
Net income (loss)
The following table sets forth the primary components of net income (loss)loss attributable to 3D Systems for the yearsyear ended December 31, 2021 and 2020.
Table 6
| | | | | | | | | | | | | | | | | |
| Year Ended December 31, | | |
| (Dollars in thousands) | 2021 | | 2020 | | Change |
| Loss from operations | $ | (33,069) | | | $ | (118,963) | | | $ | 85,894 | |
| Other non-operating items: | | | | | |
| Interest and other income (expense), net | 352,609 | | | (24,447) | | | 377,056 | |
| Benefit (provision) for income taxes | 2,512 | | | (6,184) | | | 8,696 | |
| Net income (loss) | $ | 322,052 | | | $ | (149,594) | | | $ | 471,646 | |
| | | | | |
| | | | | |
| | | | | |
| Weighted average shares, basic | 122,867 | | | 117,579 | | | |
| Weighted average shares, diluted | 126,334 | | | 117,579 | | | |
| Income (loss) per share, basic | $ | 2.62 | | | $ | (1.27) | | | |
| Income (loss) per share, diluted | $ | 2.55 | | | $ | (1.27) | | | |
The2022, as compared to the net income attributable to 3D Systems for the year ended December 31, 2021, as compared to the net loss for year ended December 31, 2020, was primarily driven by a decreasean increase in our loss from operations and the gain2021 gains on the divestitures of Cimatron, ODM and Simbionix, as previously discussed. See “Gross profit and gross profit margins”, “Operating expenses”, and Interest and other income (expense), net above.
Liquidity and Capital Resources
Table 7
| | | | | | | | | | | | | | | | | | | | | | | |
| | | Change |
| (Dollars in thousands) | December 31, 2021 | | December 31, 2020 | | $ | | % |
| Cash and cash equivalents | $ | 789,657 | | | $ | 75,010 | | | $ | 714,647 | | | 952.7 | % |
| Accounts receivable, net | 106,540 | | | 114,254 | | | (7,714) | | | (6.8) | % |
| Inventories | 92,887 | | | 116,667 | | | (23,780) | | | (20.4) | % |
| 989,084 | | | 305,931 | | | 683,153 | | | |
| Less: | | | | | | | |
| Current portion of long term debt | — | | | 2,051 | | | (2,051) | | | (100.0) | % |
| Current right of use liabilities | 8,344 | | | 9,534 | | | (1,190) | | | (12.5) | % |
| Accounts payable | 57,366 | | | 45,174 | | | 12,192 | | | 27.0 | % |
| Accrued and other liabilities | 76,994 | | | 69,812 | | | 7,182 | | | 10.3 | % |
| 142,704 | | | 126,571 | | | 16,133 | | | |
| Operating working capital | $ | 846,380 | | | $ | 179,360 | | | $ | 667,020 | | | 371.9 | % |
| | | | | | | | | | | | | | | | | | | | | | | |
| | | Change |
| (Dollars in thousands) | December 31, 2022 | | December 31, 2021 | | $ | | % |
| Cash and cash equivalents | $ | 388,134 | | | $ | 789,657 | | | $ | (401,523) | | | (50.8) | % |
| Short-term investments | 180,603 | | | — | | | 180,603 | | | — | % |
| Accounts receivable, net | 93,886 | | | 106,540 | | | (12,654) | | | (11.9) | % |
| Inventories | 137,832 | | | 92,887 | | | 44,945 | | | 48.4 | % |
| 800,455 | | | 989,084 | | | (188,629) | | | (19.1) | % |
| Less: | | | | | | | |
| | | | | | | |
| Current lease liabilities | 9,036 | | | 8,344 | | | 692 | | | 8.3 | % |
| Accounts payable | 53,826 | | | 57,366 | | | (3,540) | | | (6.2) | % |
| Accrued and other liabilities | 55,571 | | | 76,994 | | | (21,423) | | | (27.8) | % |
| 118,433 | | | 142,704 | | | (24,271) | | | |
| Operating working capital | $ | 682,022 | | | $ | 846,380 | | | $ | (164,358) | | | (19.4) | % |
We assess our liquidity in terms of our ability to generate cash to fund our operating, investing and financing activities. In doing so, we review and analyze our current cash on hand, the number of days our sales are outstanding, inventory turns, capital expenditure commitments and accounts payable turns. Our cash requirements, excluding acquisitions, primarily consist of funding working capital and capital expenditures.
At December 31, 2022, cash and cash equivalents and short-term investments totaled $568.7 million and decreased $220.9 million since December 31, 2021. This decrease resulted primarily from cash paid for acquisitions and other investments of $103.7 million, cash used in operations of $70.0 million, capital expenditures of $20.9 million, and taxes paid related to net-share settlement of equity awards of $10.9 million.
At December 31, 2021, cash on hand which includes; cash and cash equivalents and restricted cash totaled $790.0$789.7 million and increased $705.3 million since December 31, 2020. The higher cash balance resulted from proceeds of $421.1 million from the Cimatron, ODM, and Simbionix divestitures, $446.5 million of proceeds from the issuance of convertible notes, and $48.1 million of cash flow from operations, partially offset by $21.4 million for repayments of debt, $18.8 million for capital expenditures, $139.7 million for current acquisitions, $12.6 million related to net settlement of stock-based compensation, and $6.3 million of payments related to previously purchased non-controlling interests. Cash flow from operations was negatively impacted by withholding taxes of $6.6 million related to the Cimatron divestiture.
We expect that cash flow from operations, cash and cash equivalents, short-term investments, and other sources of liquidity, such as issuing equity or debt securities subject to market conditions, will be available and sufficient to meet all foreseeable cash requirements.
Cash held outside the U.S. at December 31, 20212022 was $58.4 million, or 15.0% of total cash and cash equivalents, compared to $62.7 million, or 7.9% of total cash and cash equivalents compared to $49.7 million, or 66.2% of total cash and cash equivalents, at December 31, 2020.2021. As our previously unremitted earnings have been subjected to U.S. federal income tax, we expect any repatriation of these earnings to the U.S. would not incur significant federal and state taxes. However, these dividends are subject to foreign withholding taxes that are estimated to result in the Company incurring tax costs in excess of the cost to obtain cash through other means. Cash equivalents are comprised of funds held in money market instruments and are reported at their current carrying value, which approximates fair value due to the short termshort-term nature of these instruments. We strive to minimize our credit risk by investing primarily in investment grade, liquid instruments and limit exposure to any one issuer depending upon credit quality. See “Cash flow” discussion below.
The changes that make up the other components of working capital not discussed above resulted from the ordinary course of business. Differences between the amounts of working capital item changes in the cash flow statement and the balance sheet changes for the corresponding items are primarily the result of foreign currency translation adjustments, acquisitions and divestitures.
Cash flow
Cash flow from operations
For the year ended December 31, 2022, cash used in operating activities was $70.0 million and cash provided by operating activities for the year ended December 31, 2021 was $48.1 million. The $118.1 million decrease in cash flow from operating activities during the year ended December 31, 2022, as compared to the prior year, is primarily due to the $84.0 million increase in losses from operations and the $49.6 million increase in working capital (excluding cash, cash equivalents and short-term investments). The higher working capital primarily related to an increase in inventory balances to manage supply chain challenges and as a result of the purchase of $23.9 million of inventory from a contract manufacturer in connection with our decision to terminate the manufacturing services arrangement. In addition, there was a decrease in accrued liabilities primarily due to lower incentive compensation accruals, partially offset by a reduction in accounts receivable due to lower revenue.
Cash provided by operating activities for the year ended December 31, 2021 was $48.1 million and cash used in operating activities for the year ended December 31, 2020 was $20.1 million.
Working capital used cash of $0.7 million for the year ended December 31, 2021 and used cash of $7.3 million for the year ended December 31, 2020.2021. For the year ended December 31, 2021, working capital changes related to cash inflows were a decrease in inventory and an increase in accounts payable, partially offset by an increase in accounts receivable, and prepaid expenses and other current assets, and a decrease in deferred revenue, and other liabilities.
For the year ended December 31, 2020, drivers of working capital related to cash outflows were an increase in accounts receivable, inventory, and prepaid expenses and other current assets, and a decrease in accounts payable, partially offset by an increase in deferred revenue and customer deposits and accrued and other current liabilities.
Cash flow from investing activities
For the year ended December 31, 2021,2022, cash flow provided fromused in investing activities was $260.6$308.4 million compared to $11.7$260.6 million of cash used inprovided by investing activities for the year ended December 31, 2020. Cash inflows related to the net2021. The investing cash outflows in 2022 included investments of $384.4 million of excess cash in short-term investments offset by $200.3 million proceeds from the divestituressales and maturities of Cimatron, ODMsuch investments, the cash used for acquisitions of $103.7 million, and Simbionix, partially offset by capital expenditures and payments related to current acquisitions. of $20.9 million.
For the year ended December 31, 2020,2021, cash provided by investing activities was $260.6 million, which included $421.5 million of proceeds from the primary outflowssales of businesses, partially offset by cash related to capital expenditures. Capital expenditures were $18.8used for acquisitions and other investments of $139.7 million and $13.6 capital expenditures of $18.8 million for the years ended December 31, 2021 and 2020, respectively..
Cash flow from financing activities
CashFor the year ended December 31, 2022, the cash flow used in financing activities was $13.8 million primarily due to taxes paid related to the net-share settlement of equity awards of $10.9 million and the $2.3 million payment for the acquisition of a non-controlling interest.
For the year ended December 31, 2021, the cash flow provided by financing activities was $405.8 million for the year ended December 31, 2021, whiledue to net cash used in financing activities was $19.5 million for the year ended December 31, 2020. The primary inflow of cash for the year ended December 31, 2021 related to proceeds from the issuance of the convertible note partially offset byof $446.5 million, the repayment of the Term Facility,remaining balance of the settlementsoutstanding 5-year $100.0 million secured term loan facility of stock-based compensation and payments$21.4 million, the taxes paid related to previously purchased non-controlling interests. The primary outflownet-share settlement of cashequity awards of $12.6 million and the payment for the year ended December 31, 2020 related to partial repaymentacquisition of the Term Facility, payments related to previously purchaseda non-controlling interests, and settlementsinterest of stock-based compensation, partially offset by proceeds from the issuance of common stock.$6.3 million.
Off-Balance Sheet Arrangements
We have no off-balance sheet arrangements and do not utilize any “structured debt,” “special purpose” or similar unconsolidated entities for liquidity or financing purposes.
Material Cash Requirements
The Company's material cash requirements consist of the following contractual and other obligations:
Indebtedness
At December 31, 2021,2022, we had $460,000$460 million of outstanding 0% convertible notes which mature in November of 2026. Management may consider pursuing additional long-term financing when it is appropriate in light of cash requirements for operations or other strategic opportunities, which could result in higher financing costs.
Purchase Commitments
We have purchase commitments under legally enforceable agreements for goods and services with defined terms as to quantity, price and timing of delivery.
Leases
The Company hashad operating and financing lease obligations (inclusive of $69,849interest) of $65.3 million at December 31, 2021,2022, primarily related to real estate and equipment leases, of which approximately $11,000$11.6 million in payments are expected over the next twelve months. Additionally, at December 31, 2022, the Company has $31,108had $33.4 million in lease obligations for which the leases have not commenced as the facilities are under construction by the landlord. For more information on the Company's leases, refer to Note 7 to the consolidated financial statements.statements in Item 8 of this Form 10-K.
Dussur
In March 2022, we and the Saudi Arabian Industrial Investments Company ("Dussur") signed an agreement to form a joint venture intended to expand the use of additive manufacturing within the Kingdom of Saudi Arabia and surrounding geographies, including the Middle East and North Africa. The joint venture is to enable the development of Saudi Arabia's domestic additive manufacturing production capabilities, consistent with the Kingdom’s ‘Vision 2030,’ which is focused on diversification of the economy and long-term sustainability. Once the joint venture is formed, 3D Systems will own approximately 49% and is committed to an initial investment of about $6.5 million, of which $3.4 million has been deposited in an escrow account and is reported as restricted cash within other assets on the balance sheet as of December 31, 2022. Use of the amount deposited in escrow is limited to funding the Company's initial investment in the joint venture, and such amount is expected to be deposited into a bank account of the joint venture for use in its operations or to pay outstanding liabilities upon legal formation. Additional future investments are contingent upon achievement of certain milestones by the joint venture. The impact on the Company’s financial position, results of operations and cash flows is not expected to be material other than the cash outflow(s) related to the initial and contingent investments.
Sources of Funding to Satisfy Material Cash Requirements
The Company believes that it has the financial resources needed to meet its cash requirements and expects to have positive operating cash flow in 2022.requirements. Cash requirements for periods beyond the next twelve months will depend, among other things, on the Company’s profitability and its ability to manage working capital requirements. The Company may also borrow from various sources as described above.above.
Other Contractual Commitments
Convertible Note
We were in compliance with all covenants of the Noteoutstanding 0% convertible notes due November 2026 as of December 31, 2021.2022.
Indemnification
In the normal course of business we periodically enter into agreements to indemnify customers or suppliers against claims of intellectual property infringement made by third parties arising from the use of our products. Historically, costs related to these indemnification provisions have not been significant. We are unable to estimate the maximum potential impact of these indemnification provisions on our future results of operations.
To the extent permitted under Delaware law, we indemnify our directors and officers for certain events or occurrences while the director or officer is, or was, serving at our request in such capacity, subject to limited exceptions. The maximum potential amount of future payments we could be required to make under these indemnification obligations is unlimited; however, we have directors’ and officers’ insurance coverage that may enable us to recover future amounts paid, subject to a deductible and to the policy limits.
Financial Instruments
We conduct business in various countries using both the functional currencies of those countries and other currencies to effect cross bordercross-border transactions. As a result, we are subject to the risk that fluctuations in foreign exchange rates between the dates that those transactions are entered into and their respective settlement dates will result in a foreign exchange gain or loss. When practicable, we endeavor to match assets and liabilities in the same currency on our U.S. balance sheet and those of our subsidiaries in order to reduce these risks. WhenWe also, when we consider it appropriate, we enter into foreign currency contracts to hedge exposures arising from those transactions. We had $43.0 million$0 and $101.8$43.0 million in notional foreign exchange contracts outstanding as of December 31, 20212022 and 2020,2021, respectively. The fair value of these contracts was not material. We have elected not to prepare and maintain the documentation to qualify for hedge accounting treatment under ASC 815, “Derivatives and Hedging,” and therefore, all gains and losses (realized or unrealized) are recognized in Interestinterest and other expense, net in the consolidated statements of operations and comprehensive income (loss). Depending on the fair value at the end of the reporting period, derivatives are recorded either in prepaid and other current assets or in accrued liabilities in the consolidated balance sheets.
We do not hedge for trading or speculative purposes, and our foreign currency contracts are generally short-term in nature, typically maturing in 90 days or less.
See Note 15 to the consolidated financial statements in Item 8 of this Form 10-K for further discussion.
Critical Accounting Policies and Significant Estimates
We prepare our consolidated financial statements in accordance with U.S. Generally Accepted Accounting Principles ("GAAP"). In doing so, we have to make estimates and assumptions that affect our reported amounts of assets, liabilities, revenues, expenses, gains and losses, as well as related disclosure of contingent assets and liabilities. In some cases, we could reasonably have used different accounting policies and estimates. In some cases, changes in theour accounting estimates are reasonably likely to occur from period to period. Accordingly, actual results could differ materially from our estimates. To the extent that there are material differences between theseour estimates and actual results, our financial condition or results of operations will be affected. We base our estimates on past experience and other assumptions that we believe are reasonable under the circumstances, and we evaluate these estimates on an ongoing basis. We refer to accounting estimates of this type as critical accounting policies and estimates, which we discuss further below. We have reviewed our critical accounting policies and estimates with the audit committee of our board of directors.
See Note 2 to the consolidated financial statements in Item 8 of this Form 10-K for a summary of significant accounting policies and the effect on our financial statements.policies.
Revenue recognition
Revenue is recognized for the amount of consideration we expect to receive in exchange for products or services when control of thethose promised products or services is transferred to customers, in an amount that reflectswhich generally occurs when the consideration we expect to receive in exchange for those products or services. A majority of our revenue is recognized at the point in time when products aregoods have been shipped or services are delivered to customers.the customer, risk of loss has transferred to the customer, and we have a present right to payment.
We enter into contracts that can include various combinations of products and services whichthat are generally capable of being distinct and are accounted for as separate performance obligations. Many of our contracts with customers include multiple performance obligations. For such arrangements, we allocate revenue to each performance obligation based on its relative standalone selling price (“SSP”). Judgment is required to determine the SSP for each distinct performance obligation in a contract. For the majority of items, we estimate SSP using historical transaction data. We use a range of amounts to estimate SSP when we sell each of the products and services separately and need to determine whether there is a discount to be allocated based on the relative SSP of the various products and services. In instances where SSP is not directly observable, such as when the product or service is not sold separately, we determine the SSP using information that may include market conditions and other observable inputs.
In some circumstances, we have more than one SSP for individual products and services due to the stratification of those products and services by customers, geographic region or other factors. In these instances, we may use information such as the size of the customer and geographic region in determining the SSP.
The determination of SSP is an ongoing process, and information is reviewed regularly in order to ensure SSP reflects the most current information or trends.
The nature of our marketing incentives may lead to consideration that is variable. Judgment is exercised at contract inception to determine the expected value of the contract and resulting transaction price. Ongoing assessments are performed to determine if updates are needed to the original estimates.
See Note 2 and Note 5 to the consolidated financial statements in Item 8 of this Form 10-K for further discussion.
Allowance for doubtful accounts
In evaluating the collectability of our accounts receivable, we assess a number of factors, including specific customers’ abilities to meet their financial obligations to us, the length of time receivables are past due, and historical collection experience.experience, current economic conditions, and reasonable and supportable forecasts. Based on these assessments, we may record a reserve for specific customers, as well as a general reserve and allowance for returns and discounts. If circumstances related to specific customers change, or economic conditions deteriorate such that our past collection experience is no longer relevant, our estimate of the recoverability of our accounts receivable could be further reduced from the levels provided for in the consolidated financial statements. One customer represents significant concentration of credit risk, as they represent greater than 10% of our total accounts receivable.
We evaluate specific accounts for which we believe a customer may have an inability to meet their financial obligations (for example, aging over 90 days past due or bankruptcy). In these cases, we use our judgment, based on available facts and circumstances, and record a specific reserve for that customer to reduce the receivable to an amount we expect to collect. These specific reserves are re-evaluated and adjusted as additional information is received that impacts the amount reserved.
Income taxes
We are subject to income taxes in the U.S. and foreign jurisdictions. Significant judgment is required in evaluating our uncertain tax positions and determining our provision for income taxes.
Although we believe we have adequately reserved for our uncertain tax positions, no assurance can be given that the final tax outcome of these matters will not be different. We adjust these reserves in light of changing facts and circumstances, such as the closing of a tax audit or the refinement of an estimate. To the extent that the final tax outcome of these matters is different than the amounts recorded, such differences will affect the provision for income taxes and the effective tax rate in the period in which such determination is made.
The provision for income taxes includes the effect of reserve provisions and changes to reserves that are considered appropriate, as well as the related net interest and penalties. In addition, we are subject to the continuous examination of our income tax returns by the Internal Revenue Service (“IRS”) and other tax authorities which may assert assessments against us. We regularly assess the likelihood of adverse outcomes resulting from these examinations and assessments to determine the adequacy of our provision for income taxes.
Inventories
Inventories are stated at the lower of cost or net realizable value, with cost being determined using standard costing, which approximates the first-in, first-out method.
The inventory reserve is a critical estimate as there is rapid technological change in our industry impacting the market for our products and there is significant judgment in estimating the amount of spare parts to keep on hand to service previously sold printers for periods of up to 10 or more years.
See Note 8 to the consolidated financial statements in Item 8 of this Form 10-K for further discussion.
Business combinations and purchase accounting
We apply purchase accounting to transactions that meet the definition of business combinations. When applying purchase accounting, we are required to estimate the fair value of the assets acquired and liabilities assumed in a business combination as of the acquisition date, for which the Company engages a third-party valuation specialist to assist. The application of purchase price accounting oftentimes results in the identification and valuation of intangible assets that may not have been previously recognized on the balance sheet of the acquired company. The amount of purchase price paid in excess of the net assets acquired is recorded as goodwill.
The fair values of acquired assets and assumed liabilities are estimated in accordance with accounting standards which define fair value as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants. Management must apply judgment when identifying the intangible assets acquired as part of a business combination, as well as when determining the appropriate valuation technique to be applied to all acquired assets and assumed liabilities. Management also must make significant estimates and assumptions when determining the inputs for inclusion in the related valuation models. The fair values of the net assets acquired are determined primarily using Level 3 inputs (inputs that are unobservable to the marketplace participant).
The most significant estimates and assumptions relate to the determination of (1) the fair values of identified intangible assets (e.g., developed technology, trade names) and (2) the period and pattern of amortization for intangible assets that are assigned a definite life. The fair values of acquired intangible assets primarily have been determined based on projected cash flows attributable to the operations of the acquiree. The projected cash flows include various assumptions, including estimated revenue growth rates, operating margins, R&D expenditures, capital expenditures, royalty rates, and appropriate risk-adjusted discount rates used to discount the projected cash flows. The usage of different assumptions would result in the assignment of different fair values to the acquired identifiable intangible assets and the resulting assignment of purchase consideration to goodwill. Similarly, changes in the planned usage of the acquired identifiable intangible assets and/or their estimated economic lives, if any, could impact the recoverability of the assets and/or amortization period and expense attributable to the assets in the future.
Goodwill & Other Long-Lived Assets, Including Intangible Assetsother long-lived assets, including intangible assets
We review long-lived assets, including intangible assets subject to amortization, for impairment whenever events or changes in circumstances indicate that the carrying value of the asset may not be recoverable. We assess the recoverability of the carrying value of assets held for use based on a review of undiscounted projected cash flows. Impairment losses, where identified, are measured as the excess of the carrying value of the long-lived asset over its estimated fair value, as determined by discounted projected cash flows.
Goodwill represents the purchase price paid in excess of the fair value of net tangible and intangible assets acquired in a business combination. We review goodwill for impairment annually orand, between annual impairment assessments, when circumstances indicate that the likelihood of an impairment is greater than 50%. Such circumstances may include a significant adverse change in the business climate for one of our reporting units or a decision to dispose of a reporting unit or a significant portion of a reporting unit. The test for goodwill impairment compares the fair value of each of reporting unit to its respective carrying value. The process requires a significant level of estimation and use of judgment by management, particularly theto estimate of the fair value of our reporting units. Our reporting units are Healthcare and Industrial. Prior to January 1, 2021 our reporting units were the Americas, EMEA and APAC.
Long-lived assets (including ROU Assets) and amortizable intangible assets are reviewed for recoverability whenever events or changes in circumstances indicate that the carrying amount may not be recoverable.
We estimate the fair value of our reporting units based primarily on the discounted projected cash flows of the underlying operations, which requires us to make assumptions about estimated cash flows, including long-term revenue and expense forecasts, profit margins, long-term forecasts, discount rates and terminal growth rates. We developed these assumptions based on the market risks unique to each reporting unit.
As of December 31, 2021, we have approximately $0.6 million of goodwill that is deductible for tax purposes.
As of September 30, 2020, we experienced a triggering event due to a drop in our stock price, which ultimately had been negatively impacted by the business environment as a result of the COVID-19 pandemic, and performed a quantitative analysis for potential impairment of our goodwill and long-lived asset balances. Based on available information and analysis as of September 30, 2020, we determined the carrying value of the EMEA reporting unit exceeded its fair value and recorded a non-cash goodwill impairment charge of $48.3 million. We determined the fair value of the Americas and APAC reporting units exceeded their carrying values and the carrying value of our long-lived assets is recoverable for all reporting units.
Fair value was determined using a combination of an income approach, which estimates fair value based upon projections of future revenues, expenses, and cash flows discounted to its present value, and a market approach. The valuation methodology and underlying financial information included in the Company's determination of fair value required significant judgments by management. The principal assumptions used in the Company's discounted cash flow analysis consisted of (a) the long-term projections of future financial performance and (b) the weighted-average cost of capital of market participants, adjusted for the risk attributable to the Company and the industry in which it operates. Under the market approach, the principal assumption included an estimate of multiples of various financial metrics of comparable companies.
We conducted our annual goodwill impairment test for the years ended December 31, 20212022 and 20202021 as of November 30, 2022 and 2021, respectively, and 2020, respectively. Thereconcluded there was no goodwill impairment for the year ended December 31, 2021. We had an immaterial amount of other long lived asset impairment charges for the year ended December 31, 2021.impairment.
ContingenciesRegenerative Medicine earnout payments and performance-based stock units
In connection with the acquisition of Volumetric on December 1, 2021, the Company could be required to pay up to $355.0 million in earnout payments to Volumetric’s former owners (“Sellers”) based upon the achievement of up to seven non-financial milestones. Each of the non-financial milestones, which individually triggers a specific earnout payment if achieved prior to an agreed upon date of either December 31, 2030 or December 31, 2035, is based upon specific advances in regenerative medicine related to lungs or tissue organs. For each milestone, payment is only due to the extent that the Sellers continue to be employed by the Company at the time that a milestone is achieved. As the earnout payments require the continued employment of Volumetric’s Sellers, the Company recognizes each individual earnout payment as compensation expense over the period commencing on the date that the related milestone is deemed probable of achievement through the anticipated date of achievement.
In addition, the Company has granted performance-based stock units (“PSUs”) with vesting terms that are based upon four individually-measured, non-financial milestones to other employees who work on advancements in regenerative medicine related to lungs and tissue organs. The PSUs associated with each individual milestone are recognized as compensation expense over the period commencing on the date that the respective milestone is deemed probable of being met through the anticipated date of achievement.
As the milestones that trigger the Volumetric earnout payments and the vesting of the PSUs are (1) based upon scientific and technological advancements that are expected to require multiple years of R&D to achieve and (2) subject to significant known and unknown risks and uncertainties, management must apply significant assumptions and judgment at each balance sheet date to assess both the probability of achievement and expected timing of achievement. A change in management’s assumptions or estimates regarding the probability and/or timing of achievement of a milestone in connection with management’s quarterly reassessment can materially impact the amount of compensation expense recognized for the respective and future periods as follows:
•A change in assumptions that results in a milestone first being deemed probable of achievement will result in the recognition of incremental compensation expense in the Company’s consolidated statement of operations;
•A change in assumption regarding the timing of achievement of a milestone will result in the acceleration or deceleration of the recognition of future compensation expense, as well as the potential recognition of an expense catch-up or reversal adjustment in the period of change; and/or
•A change in assumption that results in a milestone no longer being deemed probable of achievement will result in a full reversal of previously recognized expense.
The Company is currently recognizing compensation expense based upon the assumed achievement of one Volumetric earnout payment milestone for which the potential amount due to the Sellers will be $65 million and one PSU milestone for which the aggregate grant date fair value of the outstanding and unvested awards is $4.5 million. Achievement of each milestone is anticipated to occur as of the end of fiscal year 2025. As of December 31, 2022, unrecognized compensation expense attributable to the Volumetric earnout payment and PSUs deemed probable of being earned was $47.8 million and $3.4 million, respectively. Changes in management’s assumptions regarding the probability and/or timing of achievement of these respective milestones could directly affect the amount of future compensation expense recognized for the reasons described above.
In addition, the Company has not commenced the recognition of compensation expense related to (1) $290 million of Volumetric earnout payments and (2) outstanding PSUs with an aggregate grant date fair value of $13.6 million because the related milestones were not deemed probable of achievement as of December 31, 2022. Changes to management’s assumptions regarding the probability and/or timing of achievement of these remaining milestones could significantly increase the amount of compensation expense recognized by the Company.
Loss contingencies
We record an estimated loss from a contingency when information indicates that it is probable that an asset has been impaired or a liability has been incurred at the date of the financial statements and the amount of the loss can be reasonably estimated. Accounting for contingencies requires us to use our judgment and the ultimate resolution of our exposure related to these matters may change as further facts and circumstances become known.
See Note 23 to the consolidated financial statements in Item 8 of this Form 10-K for further discussion.
Recent Accounting Pronouncements
See Note 2 to the consolidated financial statements in Item 8 of this Form 10-K for recently issueda discussion of recent accounting standards, including the expected dates of adoption and expected impact to the consolidated financial statements upon adoption.
Item 7A. Quantitative and Qualitative Disclosures about Market Risk
We are exposed to market risks fromrelated to fluctuations in interest rates, foreign currency exchange rates and commodity prices, each of which may adversely affect our results of operations and financial condition. We seek to minimize these risks through regular operating and financing activities and, when we consider it to be appropriate, through the use of derivative financial instruments. We do not purchase, hold or sell derivative financial instruments for trading or speculative purposes.
Interest rates
Our earnings exposure related to movements in interest rates is primarily derived from variable interest rate deposits. At December 31, 2021, we had $585.4 million in variable-rate accounts. A hypothetical interest rate change of 10% would not have a material impact on annualized interest income.
Foreign exchange rates
Because we conduct our operations in many areas of the world involvingand our transactions are denominated in a variety of currencies, our results of operations, as expressedreported in U.S. dollars, may be significantly affected by fluctuations in rates of exchange between currencies. These fluctuations could be significant. In 2021,2022, approximately 44.6%39.4% of our net sales and a significant portion of our costs were denominated inare attributable to entities with functional currencies other than the U.S. dollar. We generally are unable to adjust our non-dollar local currency sales prices to reflect changes in exchange rates between the dollar and the relevant local currency. As a result, changes in exchange rates between the U.S. Dollar and the Euro, Japanese Yen, British Pound, South Korean Won or other currencies in which we receive sale proceeds have a direct impact on our reported operating results. These impacts are partlypartially offset by expenses incurred in the same currency as the sales. There is normally a time lag between our sales and collection of the related sales proceeds, exposing us to additional currency exchange rate risk.
When practicable, we endeavor to match assets and liabilities in the same currency on our U.S. balance sheet, and thoseas well as the balance sheets of our subsidiaries, in order to reduce these risks.the risks attributable to conducting transactions in a variety of currencies. We also, when we consider it appropriate, enter into foreign currency contracts to hedge exposures arising from thosethese transactions.
At We had $0 and $43.0 million in notional foreign currency exchange contracts outstanding as of December 31, 2022 and 2021, respectively. The fair value of the contracts outstanding at December 31, 2021 was not material.
For the year ended December 31, 2022, a hypothetical change of 10% in foreign currency exchange rates would cause a changehave caused changes in revenue and expensetotal operating expenses of approximately $27.5$21.2 million and $15.7$22.0 million, respectively, assuming all other variables remained constant.
We enter intoFor the year ended December 31, 2022, the aggregate foreign currency forward contracts to reduce the effect of fluctuating foreign currencies. At December 31, 2021, we had notional forward exchange contracts outstanding of $43.0loss included in net income was $4.4 million. We believe these foreign currency forward contracts and the offsetting underlying commitments, when taken together, do not create material market risk.
For the year ended December 31, 2021, the aggregate foreign currency gain or loss included in net income was $1.7 million.
Commodity prices
We are exposed to price volatility related to raw materials and energy products used in conjunction with our printer assembly and print materials blending processes. Generally, we acquire such components at market prices and do not use financial instruments to hedge commodity prices. AtFor the year ended December 31, 2021,2022, a hypothetical 10% change in commodity prices for raw materials would causehave caused a change to cost of sales of approximately $7.1$20.2 million.
Item 8. Financial Statements and Supplementary Data
Our consolidated financial statements and the related notes, together with the Report of Independent Registered Public Accounting Firm thereon, are set forth below beginning on page F-1 and are incorporated herein by reference.
Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
Not applicable.
Item 9A. Controls and Procedures
Evaluation of Disclosure Controls and Procedures
OurUnder the supervision and with the participation of our management, including theour Chief Executive Officer and Chief Financial Officer, conducted an evaluation ofwe evaluated the effectiveness of our disclosure controls and procedures pursuant to(as that term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act Rule 13a-15(e),of 1934, as amended (the “Exchange Act”)) as of December 31, 2021. Disclosure controls refer to2022, which is the end of the period covered by this Annual Report. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and other procedures designedwere not effective as of December 31, 2022 to ensure that information required to be disclosed by the Company in the reports we file or submit under the Exchange Act is (i) recorded, processed, summarized, evaluated and reported, as applicable, within the time periods specified in the United States Securities and Exchange Commission’s rules and forms ofand (ii) accumulated and communicated to the SEC, and to provide reasonable assurance that we accumulate and communicate such information to ourCompany’s management, including ourthe Company’s Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions aboutregarding required disclosure.disclosures.
BasedNotwithstanding the existence of the material weakness described below, management believes that the consolidated financial statements included in this Annual Report on this evaluation,Form 10-K fairly present, in all material respects, our management, including our Chief Executive Officerfinancial position, results of operations and Chief Financial Officer, concluded that,cash flows as of December 31, 2021, our disclosure controls and procedures were not effective due tofor the material weaknessesperiods presented, in our internal control over financial reporting, as further described below.conformity with GAAP.
Management’s Report on Internal Control over Financial Reporting
Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Our, and for performing an assessment of the effectiveness of internal control frameworkover financial reporting as of December 31, 2022. The Company’s internal control over financial reporting is a process designed by, or under the supervision of, our Chief Executive Officer and processes were designedChief Financial Officer, to provide reasonable assurance to management and the Board of Directors regarding the reliability of financial reporting and the preparation of our consolidated financial statements for external purposes in accordance with GAAP. OurThe Company’s internal control over financial reporting includes those policies and procedures that:
• Pertainthat (i) pertain to assets of the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and
dispositions of our assets;
• ProvideCompany; (ii) provide reasonable assurance that transactions are recorded properlyas necessary to allow for thepermit preparation of financial
statements in accordance with GAAP, and that our receipts and expenditures of the Company are being made only in accordance with
authorizations of our management and directors;directors of the Company; and
• Provide (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or
disposition of ourthe Company’s assets that could have a material effect on the consolidated financial statements.
BecauseManagement’s assessment of its inherent limitations, a system of internal control over financial reporting can provide only reasonable assurance and may not prevent or detect misstatements. Further, because of changing conditions,conclusion on the effectiveness of internal control over financial reporting may varydid not include the internal controls of Kumovis GmbH (“Kumovis”) and Titan Additives LLC (“Titan”) which were acquired on April 1, 2022, or dp polar GmbH (“dp polar”) which was acquired on October 4, 2022. We began consolidating the results of Kumovis, Titan, and dp polar in the 2022 consolidated financial statements of the Company as a result of the acquisitions, which represented approximately 3.2%, 2.8%, and 2.2%, respectively, of the Company's total assets as of December 31, 2022 and 0.1%, 0.2%, and 0.0%, respectively, of the Company's total revenue for the year ended December 31, 2022. Due to the timing of these acquisitions and as permitted by SEC guidance, management excluded Kumovis, Titan, and dp polar from its December 31, 2022 assessment of internal control over time.financial reporting.
Under the supervision and with the participation
Because of our management, including our Chief Executive Officer and Chief Financial Officer, we performed an assessment of the effectiveness of ourits inherent limitations, internal control over financial reporting based onmay not prevent or detect all misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the framework describedrisk that controls may become inadequate because of changes in Internal Control - Integrated Framework (2013) issued byconditions, or that the Committeedegree of Sponsoring Organizations ofcompliance with the Treadway Commission (COSO). Based on this assessment, we concluded that we did not maintain effective internal control over financial reporting as of December 31, 2021, due to an aggregation of certain control deficiencies that resulted in three material weaknesses identified below, although the volume of control deficiencies that aggregated into our previously reported material weakness has been significantly reduced.policies or procedures may deteriorate.
A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of thea company's annual or interim consolidated financial statements will not be prevented or detected on a timely basis.
TheManagement, including our Chief Executive Officer and Chief Financial Officer, assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2022. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) the Internal Control - Integrated Framework (2013). Based on its assessment, management has concluded that the Company did not maintain effective internal control over financial reporting as of December 31, 2022, due to the following two material weaknesses present relateweaknesses:
•We did not design or maintain effective controls in response to a lackthe risks of certainmaterial misstatement, including designing and maintaining formal accounting policies, procedures, and controls or improper executionover significant accounts and disclosures to achieve complete, accurate and timely financial accounting, reporting and disclosures, with respect to: (1) revenue, receivables and deferred revenue, including the input of designed control procedures (1) for certain non-standard contractsexecuted contract terms into the Company’s information systems that perform revenue recognition; and non-standard contract terms; (2) over the review of internally prepared reports and analyses utilized in the financial closing process; and (3) for the calculation of the Company's provision for income taxes including for material non-routine transactions. The combination of control deficiencies that resulted in these material weaknesses were partially related to employee training, resulting in a lack of knowledge or skill level to properly execute the designed controls or perform an effective review over certain manual controls related to the financial statement close process. In addition, certain control deficiencies related to the timely review of transactions that were infrequent in nature.
The effectiveness of our internal control over financial reporting as of December 31, 2021 has been audited by BDO USA, LLP, an independent registered public accounting firm, as stated in their report included in Item 8 of this Form 10-K.
RemediationManagement’s Plan for Material Weaknesses as of December 31, 2020Remediation
To address the twoThe material weaknesses described above were initially identified at December 31, 2020 we began implementingand continued to exist at December 31, 2022. However, as a result of the remediation plan we commenced in January 2021, the number of control deficiencies that aggregated into the material weaknesses at December 31, 2022 were significantly reduced as compared to December 31, 2020. The remediation plan we began in January 2021 is designed to improve our internal control over financial reporting and remediate the related control deficiencies that led to these material weaknesses. The remediation plan includedIn response to these deficiencies, management, with the oversight of the Audit Committee of the Board of Directors, has identified and implemented steps to remediate the material weaknesses.
During the year ended December 31, 2022, the Company completed the implementation of the following remedial actions:measures designed to address the material weaknesses and to continue to improve our internal control over financial reporting.
a.•Formally enhanced, developed,Retained an outside firm with expertise in the design and implemented policies, proceduresexecution of internal controls over financial reporting to examine our control design, perform a root cause analysis as to why certain controls have not been and processes relatingcontinue to our financial reporting.
b.Hired an experienced Chief Accounting Officer (CAO), along with additional accounting personnel some of whom possess public company accountingnot be properly executed, and reporting technical expertise.
c.Engaged outside consultants to advise on changes in the design of our controls and procedures and implementation of our remediation activities and to advise on technical accounting matters.activities.
d.•Enhanced the global control environment, including testing in 20212022 of a significant number of additional business process and information technology controls.
e.Trained new and existing accounting and finance personnel as well as key personnel in other functions such as, but not limited to, operations, sales, business development, human resources, legal and supply chain on the newly enhanced, developed and implemented policies and procedures.
f.Trained personnel noted in the above bullet as to the proper design and execution of control procedures and noted the importance of the ongoing execution and maintenance of control process and procedures.
g.•Implemented software to manage and administer account reconciliations.
h.Modified existing software to capture non-standard terms and conditions related to customer contracts.
i.Enhanced the monthly close process to improve the timeliness of recording entries which permits more time to review and analyze financial statement accounts and to execute control procedures.
j.•Revamped and expanded our internal disclosure processes to provide greater representation across functions and improve opportunities to identify matters requiring accounting disposition or disclosures.
After an assessment of the impact of the remediation actions commenced in 2021, we determined that the two material weaknesses identified at December 31, 2020 were not fully remediated as of December 31, 2021, but the volume of control deficiencies that aggregated into the previously reported material weaknesses has been significantly reduced. To fully remediate these material weaknesses, we plan to continue enhancements to our internal controls over financial reporting in 2022. These additional remediation actions include:
a.•Hiring additional staff with appropriate accounting, finance, operational and technology knowledge and experience in the design and execution of controls,
b.Re-designing ineffective controls or processes,
c.Implementing software to enhance our financial close and reporting process, and
d.Establishing a formal controls governance committee to manage and enhance the oversight and execution of internal controls.
Remediation Plan for Material Weaknesses as of December 31, 2021
In addition to the remediation plan for the two material weaknesses discussed above, to address the tax material weakness present at December 31, 2021, we plan to implement a number of remediation actions including:
a. ImplementingImplemented software enhancements, including a tax reporting solution for our tax provision processprocess.
b. Redesigning•Redesigned controls related to the accounting for the income tax processprocess.
c. Engaging•Engaged a third party to review our quarterly and annual tax calculationscalculations.
d. Hiring•Hired additional experienced resources with backgrounds in income tax accountingaccounting.
Our remaining internal control remediation efforts are expected to include the following:
•Design and implementation of enhanced policies, procedures and controls relating to our revenue recognition and our closing and financial reporting process.
•Redesign of existing management review controls, including the input of executed contract terms into the Company’s information systems that perform revenue recognition.
•Hire and retain additional staff with sufficient experience and knowledge in GAAP financial reporting matters and internal control over financial reporting.
•Train appropriate personnel in the effective design and execution of our enhanced policies, procedures and controls, including the importance of the ongoing, consistent effective execution of such procedures and controls.
•Initiation of a robust finance transformation initiative with dedicated resources tasked to create a more efficient close process and implement key technologies to enable a more mature and automated control environment.
We are committed to the remediation of all material weaknesses and expect to successfully implement enhanced control processes and have a sufficient period of operational effectiveness to evidence material weakness remediation in 2022.processes. However, as we continue to evaluate, and work to improve our internal control over financial reporting, management may determine that additional measures to address control deficiencies or modifications to the remediation plan are necessary.Therefore, we cannot assure you when we will remediate such weaknesses, nor can we be certain that additional actions will not be required or the costs of any such additional actions.Moreover, we cannot assure you that additional material weaknesses will not arise in the future.
Attestation Report of Independent Registered Public Accounting Firm
The effectiveness of our internal control over financial reporting as of December 31, 2022 has been audited by BDO USA, LLP, an independent registered public accounting firm, as stated in their report included in Item 8 of this Form 10-K.
Changes in Internal Control Over Financial Reporting
The Company has concluded that the following material weakness, which was described in the 2021 Form 10-K, has been remediated as of December 31, 2022 (the “Remediated Material Weakness”): a lack of certain controls, or improper execution of designed control procedures, for the calculation of the Company's provision for income taxes including for material non-routine transactions.
Other thanExcept for the Remediated Material Weakness, and the management remediation effortsplan described above, with respect to the two material weaknesses identified at December 31, 2020, there were no changes in ourthe Company’s internal controlcontrols over financial reporting that occurred during the quarter ended December 31, 2021,2022 that have materially affected, or are reasonably likely to materially affect, ourthe Company’s internal control over financial reporting. The tax material weakness described above was identified after December 31, 2021.Accordingly, we are in the process of implementing certain changes in our internal controls to remediate this tax material weakness as described above. The implementation of the material aspects of these additional remediation efforts began in the first quarter of fiscal year 2022.
Item 9B. Other Information
None.
Item 9c.9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections
None.
PART III
Item 10. Directors, Executive Officers and Corporate Governance
The information required in response to this Item will be set forth in our Proxy Statement for our 20222023 Annual Meeting of Stockholders (“Proxy Statement”) under the captions “Proposal One: Election of Directors,” “Corporate Governance Matters,at 3D Systems,” “Delinquent Section 16(a) Reports,” “Corporate Governance Matters—at 3D Systems—Code of Conduct and Code of Ethics,” “Corporate Governance Matters—at 3D Systems—Corporate Governance and NominatingSustainability Committee,” and “Corporate Governance Matters—at 3D Systems—Audit Committee.”
Item 11. Executive Compensation
The information in response to this Item will be set forth in our Proxy Statement under the captions “Director Compensation,” “Executive Compensation,” “Corporate Governance Matters—at 3D Systems—Compensation Committee,” and “Executive Compensation—Compensation Committee Report.”
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
Except as set forth below, the information required in response to this Item will be set forth in our Proxy Statement under the caption “Security Ownership of Certain Beneficial Owners and Management.”
Equity Compensation Plans
The following table summarizes information about the equity securities authorized for issuance under our compensation plans as of December 31, 2021.2022. For a description of these plans, please see Note 18 to the consolidated financial statements in Item 8 of this Form 10-K.
| | (in thousands, except exercise price) | (in thousands, except exercise price) | | Number of securities to be issued upon exercise of outstanding stock options, warrants and rights | | Weighted average exercise price of outstanding options, warrants and rights a | | Number of securities remaining available for future issuance under equity compensation plans b | (in thousands, except exercise price) | | Number of securities to be issued upon exercise of outstanding stock options, warrants and rights | | Weighted average exercise price of outstanding options, warrants and rights a | | Number of securities remaining available for future issuance under equity compensation plans b |
| Equity compensation plans approved by stockholders: | Equity compensation plans approved by stockholders: | | | | | | | Equity compensation plans approved by stockholders: | | | | | | |
| Stock options | Stock options | | 420 | | | $ | 13.26 | | | | Stock options | | 420 | | | $ | 13.26 | | | |
| Restricted stock units | Restricted stock units | | 1,914 | | | | | | Restricted stock units | | 2,818 | | | | | |
| Total | Total | | 2,334 | | | | | 4,258 | | Total | | 3,238 | | | | | 7,568 | |
a.The weighted-average exercise price is only applicable to stock options.
b.The number of securities remaining available for future issuance for stock options, restricted stock units, and stock awards for non-employee directors is approved in total and not individually with respect to these items.
Item 13. Certain Relationships and Related Transactions and Director Independence
The information required in response to this Item will be set forth in our Proxy Statement under the captions “Corporate Governance Matters—at 3D Systems—Director Independence” and “Corporate Governance Matters—at 3D Systems—Related Party Transaction PoliciesPolicy and Procedures.”
Item 14. Principal Accounting Fees and Services
The information in response to this Item will be set forth in our Proxy Statement under the caption “Proposal Three:Four: Ratification of Selectionthe Appointment of Independent Registered Public Accounting Firm—Fees of Independent Registered Public Accounting Firm.”
PART IV
Item 15. Exhibits, Financial Statement Schedules
| | | | | | |
| (a)(3) | Exhibits | |
| The following exhibits are included as part of this filing and incorporated herein by this reference: | |
| | |
| Share Purchase Agreement, dated November 2, 2020, by and among 3D Systems, Inc., 3D Systems Corporation and ST Acquisition Co. (Incorporated by reference to Exhibit 2.1 of the Registrant's Current Report on Form 8-K, filed November 4, 2020.) | |
| | |
| First Amendment to Share Purchase Agreement, dated December 31, 2020, by and among ST Acquisition Co., 3D Systems, Inc. and 3D Systems CorporationCorporation. (Incorporated by reference to Exhibit 2.1 to Registrant's Current Report on Form 8-K, filed January 4, 2021.) | |
| | |
| Asset Purchase Agreement, dated June 1, 2021, by and among 3D Systems, Inc., Quickparts.com, Inc., 3D Systems Italia Srl, 3D Systems France Sarl, 3D Systems Europe Limited, 3D Systems GmbH, QP 3D Acquisition, Inc., and 3D Systems Corporation. (Incorporated by reference to Exhibit 2.1 of the Registrant’s Current Report on Form 8-K, filesfiled on June 2, 2021.) | |
| | |
| First Amendment to the Asset Purchase Agreement, dated June 1, 2021, by and among 3D Systems, Inc., Quickparts.com Inc., 3D Systems Italia Srl, Sd Systems France Sarl, 3D Systems Europe Limited, 3D Systems GmbH, QP 3D Acquisition, Inc., and 3D Systems.Systems Corporation. (Incorporated by reference Exhibit 2.5 to Registrant’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2021, filed November 8, 2021.) | |
| | |
| Second Amendment to the Asset Purchase Agreement, dated June 1, 2021, by and among 3D Systems, Inc., Quickparts.com Inc., 3D Systems Italia Srl, Sd Systems France Sarl, 3D Systems Europe Limited, 3D Systems GmbH, QP 3D Acquisition, Inc., and 3D Systems Corporation. (Incorporated by reference to Exhibit 2.5 of the Registrant’s Annual Report on Form 10-K for the year ended December 31, 2021, filed on March 1, 2022.) | |
| | |
| | | | | | |
| Stock Purchase Agreement, dated July 28, 2021, by and between 3D Systems, Inc. and Surgical Science Sweden AB. (Incorporated by reference to Exhibit 2.1 of the Registrant’s Current Report on Form 8-K, filesfiled on July 30, 2021.) | |
| | |
| Agreement and Plan of Merger, dated September 8, 2021, by and among 3D Systems Corporation, Oqton, Inc., 3DS Merger Sub 1, Inc., 3DS Merger Sub 2 Inc., and Shareholder Representative Services LLC, solely in its capacity as the representative, agent and attorney-in-fact of the Sellers. (Incorporated by reference to the Exhibit 2.1 of the Registrant’s Current Report on Form 8-K filed, on September 9, 2021.) | |
| | |
| First Amendment to the Agreement and Plan of Merger, dated October 29, 2021, by and among 3D Systems Corporation, Oqton, Inc., 3DS Merger Sub 1, Inc., 3DS Merger Sub 2 Inc., and Shareholder Representative Services LLC, solely in its capacity as the representative, agent and attorney-in-fact of the Sellers. (Incorporated by reference to Exhibit 2.3 of the Registrant’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2021, filed on November 8, 2021.) | |
| | |
| Agreement and Plan of Merger, dated October 27, 2021, by and among 3D Systems Corporation, Volumetric Biotechnologies, Inc., Texans Merger Sub I, Inc., Texans Merger Sub II, Inc., and Fortis Advisors LLC, solely in its capacity as the Stockholders' Representative. (Incorporated by reference to Exhibit 2.1 of the Registrant's Current Report on Form 8-K, filed on October 28, 2021.) | |
| | |
| 3.1 | Certificate of Incorporation of Registrant. (Incorporated by reference to Exhibit 3.1 to Registrant’s Form 8-B filed on August 16, 1993, and the amendment thereto, filed on Form 8-B/A on February 4, 1994.) | |
| | |
| 3.2 | Amendment to Certificate of Incorporation filed on May 23, 1995. (Incorporated by reference to Exhibit 3.2 to Registrant’s Registration Statement on Form S-2/A, filed on May 25, 1995.) | |
| | |
| Certificate of Amendment of Certificate of Incorporation filed with Secretary of State of Delaware on May 19, 2004. (Incorporated by reference to Exhibit 3.1 to Registrant’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 2004, filed on August 5, 2004.) | |
| | |
| Certificate of Amendment of Certificate of Incorporation filed with Secretary of State of Delaware on May 17, 2005. (Incorporated by reference to Exhibit 3.1 to Registrant’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 2005, filed on August 1, 2005.) | |
| | |
| Certificate of Amendment of Certificate of Incorporation filed with the Secretary of State of Delaware on October 7, 2011. (Incorporated by reference to Exhibit 3.1 to Registrant’s Current Report on Form 8-K, filed on October 7, 2011.) | |
| | |
| Certificate of Amendment of Certificate of Incorporation filed with the Secretary of State of Delaware on May 21, 2013. (Incorporated by reference to Exhibit 3.1 to Registrant’s Current Report on Form 8-K, filed on May 22, 2013.) | |
| |
| | | | | |
| Amended and Restated By-Laws. (Incorporated by reference to Exhibit 3.1 to Registrant’s Current Report on Form 8-K, filed on March 15, 2018.) | |
| | |
| Specimen Common Stock Certificate. (Incorporated by reference to Exhibit 4.1 to Registrant’s Registration Statement on Form S-3 (Registration No. 333-182065), filed on June 12, 2012.) | |
| | |
| Description of Common Stock. (Incorporated by reference to Exhibit 4.2 to Registrant's Annual Report on Form 10-K for the year ended December 31, 2020, filed on February 26, 2020.) |
| |
| Amended and Restated 2015 Incentive Plan of 3D Systems Corporation effective September 3, 2020. (Incorporated by reference to Exhibit 4.1 to Registrant's Quarterly Report on Form 10-Q for the quarter ended September 30, 2020, filed on November 5, 2020.) |
| |
| Appendix A to the 2015 Incentive Plan of 3D Systems Corporation effective May 19, 2015. (Incorporated by reference to Exhibit 10.3 to Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2015, filed on August 6, 2015.) |
| |
| Form of Restricted Stock Award Agreement under the Amended and Restated 2015 Incentive Plan. (Incorporated by reference to Exhibit 4.5 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 2020, filed on May 5, 2021.) |
| |
| Form of Restricted Stock Unit Award Agreement under the Amended and Restated 2015 Incentive Plan. (Incorporated by reference to Exhibit 4.6 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 2020, filed on May 5, 2021.) |
| |
| Form of Stock Option Award Agreement under the Amended and Restated 2015 Incentive Plan. (Incorporated by reference to Exhibit 4.10 to Registrant's Annual Report on Form 10-K for the year ended December 31, 2019, filed on February 26, 2020.) | |
| | |
| Form of Restricted Stock Award Agreement with Share Price Vesting Conditions (Incorporated by reference to Exhibit 4.17 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 2016, filed on February 28, 2017.) |
| |
| Revised Form of Performance-Based Restricted Stock Unit Award Agreement under the Amended and Restated 2015 Incentive Plan. (Incorporated by reference to Exhibit 4.10 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 2020, filed on May 5, 2021.) |
| |
| Indenture, dated as of November 16, 2021, between 3D Systems Corporation and The Bank of New York Mellon Trust Company, N.A., as trustee. (Incorporated by reference to the Exhibit 4.1 of the Registrant’s Current Report on Form 8-K filed on November 17, 2021.) | |
| | |
| Form of 0% Convertible Notes due 2026 (included in Exhibit 4.10)4.3). (Incorporated by reference to the Exhibit 4.2 of the Registrant’s Current Report on Form 8-K filed on November 17, 2021.) | |
| | |
| Lease Agreement dated February 8, 2006 between the Registrant and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 99.1 to Registrant’s Current Report on Form 8-K, filed on February 10, 2006.) | |
| | |
| First Amendment to Lease Agreement dated August 7, 2006 between the Registrant and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 10.1 to Registrant’s Current Report on Form 8-K, filed on August 14, 2006.) | |
| | |
| Second Amendment to Lease Agreement effective as of October 6, 2006 to Lease Agreement dated February 8, 2006 between 3D Systems Corporation and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 10.1 to Registrant’s Current Report on Form 8-K, filed on October 10, 2006.) | |
| | | | | | |
| | |
| Third Amendment to Lease Agreement effective as of December 18, 2006 to Lease Agreement dated February 8, 2006 between 3D Systems Corporation and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 10.1 to Registrant’s Current Report on Form 8-K, filed on December 20, 2006.) | |
| | |
| Fourth Amendment to Lease Agreement effective as of February 26, 2007 to Lease Agreement dated February 8, 2006 between 3D Systems Corporation and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 10.1 to Registrant’s Current Report on Form 8-K, filed on March 1, 2007.) | |
| | |
| Fifth Amendment to Lease Agreement effective as of March 17, 2011 to Lease Agreement dated February 8, 2006 between 3D Systems Corporation and KDC-Carolina Investments 3, LP. (Incorporated by reference to Exhibit 10.1 to Registrant’s Form 8-K, filed on March 21, 2011.) |
| |
| | | | | |
| Amended and Restated Lease Agreement dated February 25, 2021 between 3D Systems Corporation and 3D Fields, LLC. (Incorporated by reference to Exhibit 10.7 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 2020, filed on MayMarch 5, 2021.) | |
| | |
| Amendment No. 1, dated July 9, 2021, to the Amended and Restated Lease Agreement, dated February 25, 2021, between 3D Systems Corporation and 3D Fields, LLC. | |
| | |
| Amendment No. 2, dated July 13, 2022, to the Amended and Restated Lease Agreement dated February 25, 2021 between 3D Systems Corporation and 3D Fields, LLC. | |
| | |
| Credit Agreement, dated February 27, 2019, among 3D Systems Corporation, HSBC Bank USA, National Association, as Administrative Agent, Sole Lead Arranger and Sole Bookrunner, the guarantors party thereto, and the other lenders party thereto. (Incorporated by reference to Exhibit 10.10 of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2018, filed on February 28, 2019). | |
| | |
| Security Agreement, dated February 27, 2019, among 3D Systems Corporation, 3D Holdings, LLC, 3D Systems, Inc., and HSBC Bank USA, National Association, as Administrative Agent. (Incorporated by reference to Exhibit 10.11 of the Registrant's Annual Report on Form 10-K for the year ended December 31, 2018, filed on February 28, 2019). | |
| | |
| First Amendment, dated September 30, 2019, to the Credit Agreement, dated February 27, 2019, among 3D Systems Corporation, HSBC Bank USA, National Association, as Administrative Agent, Sole Lead Arranger and Sole Bookrunner, the guarantors party thereto, and the other lenders party thereto. (Incorporated by reference to Exhibit 10.2 of the Registrant's Annual Report on Form 10-Q for the quarter ended September 30, 2019, filed on October 30, 2019). | |
| | |
| Second Amendment, dated October 9, 2020, to the Credit Agreement, dated February 27, 2019, among 3D Systems Corporation, HSBC Bank USA, National Association, as Administrative Agent, Swing Loan Lender and Issuing Lender, the guarantors party thereto, and the other lenders party theretothereto. (Incorporated by reference to Exhibit 10.1 of the Registrant’s Current Report on Form 8-K, filed October 14, 2020.) | |
| | |
| Amended and Restated 2015 Incentive Plan of 3D Systems Corporation. (Incorporated by reference to Exhibit 10.1 to Registrants Current Report on Form 8-K, filed on May 26, 2022.) | |
| | |
| Appendix A to the 2015 Incentive Plan of 3D Systems Corporation effective May 19, 2015. (Incorporated by reference to Exhibit 10.3 to Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2015, filed on August 6, 2015.) | |
| | |
| Form of Restricted Stock Award Agreement under the Amended and Restated 2015 Incentive Plan. (Incorporated by reference to Exhibit 4.5 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 2020, filed on March 5, 2021.) | |
| | |
| Form of Restricted Stock Unit Award Agreement under the Amended and Restated 2015 Incentive Plan. (Incorporated by reference to Exhibit 4.6 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 2020, filed on March 5, 2021.) | |
| | |
| Form of Stock Option Award Agreement under the Amended and Restated 2015 Incentive Plan. (Incorporated by reference to Exhibit 4.10 to Registrant's Annual Report on Form 10-K for the year ended December 31, 2019, filed on February 26, 2020.) | |
| | |
| Form of Restricted Stock Award Agreement with Share Price Vesting Conditions. (Incorporated by reference to Exhibit 4.17 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 2016, filed on February 28, 2017.) | |
| | |
| | | | | | |
| Revised Form of Performance-Based Restricted Stock Unit Award Agreement under the Amended and Restated 2015 Incentive Plan. (Incorporated by reference to Exhibit 4.10 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 2020, filed on March 5, 2021.) | |
| | |
| Charles W. Hull Consulting ArrangementArrangement. (Incorporated by reference to Exhibit 10.1 of the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2010, filed on July 29, 2010.) | |
| | |
| Employment Agreement, dated August 4, 2016, between 3D Systems Corporation and Charles W. Hull. (Incorporated by reference to Exhibit 10.1 to Registrant's Current Report on Form 8-K, filed August 8, 2016.) | |
| | |
| Employment Agreement, dated June 15, 2016, between 3D Systems Corporation and Andrew M. Johnson. (Incorporated by reference to Exhibit 10.2 to Registrant’s Current Report on Form 8-K, filed on June 16, 2016.) | |
| | |
| 3D Systems Corporation Change of Control Severance PolicyPolicy. (Incorporated by reference to Exhibit 10.1 to the Registrant's Current Report on Form 8-K, filed February 23, 2018.) | |
| | |
| Employment Agreement, dated May 11, 2020, between 3D Systems Corporation and Dr. Jeffrey A. GravesGraves. (Incorporated by reference to Exhibit 10.1 of the Registrant’s Current Report on Form 8-K, filed May 14, 2020.) | |
| | |
| Employment Agreement, dated August 21, 2020, between 3D Systems Corporation and Jagtar NarulaNarula. (Incorporated by reference to Exhibit 10.1 to the Registrant’s Current Report on Form 8-K, filed August 26, 2020.) | |
| | |
| Employment Agreement, dated November 21, 2016, between 3D Systems Corporation and Menno EllisEllis. (Incorporated by reference to Exhibit 10.3 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2020, filed November 5, 2020.) | |
| | |
| Employment Agreement, dated October 1, 2020, between 3D Systems Corporation and Reji PuthenveetilPuthenveetil. (Incorporated by reference to Exhibit 10.4 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2020, filed November 5, 2020.) | |
| | |
| Amendment No. 1 to the Employment Agreement, dated February 22, 2021, between 3D Systems Corporation and Reji Puthenveetil. (Incorporated by reference to Exhibit 10.30 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 2020, filed on May 5, 2021.) | |
| | |
| Consulting Agreement, dated October 1, 2020, between 3D Systems Corporation and Reji PuthenveetilPuthenveetil. (Incorporated by reference to Exhibit 10.5 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2020, filed November 5, 2020.) | |
| | |
| Amended and Restated Employment Agreement, dated January 1, 2021, between 3D Systems Corporation and Jeff Blank. (Incorporated by reference to Exhibit 10.32 to Registrant’s Annual Report on Form 10-K for the year ended December 31, 2020, filed on May 5, 2021.) |
| |
| Employment Agreement, dated June 28, 2021, between 3D Systems Corporation and David K. Leigh. (Incorporated by reference to Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2021, filed August 9, 2021.) |
| | | | | |
| | |
| Employment Agreement, dated August 30, 2021, by and between 3D Systems Corporation and Phyllis Nordstrom. (Incorporated by reference to Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2021, filed November 8, 2021.) | |
| | |
| Equity Distribution Agreement, dated August 5, 2020, by and among 3D Systems Corporation and Truist Securities, Inc. and HSBC Securities (USA) Inc. (Incorporated by reference to Exhibit 1.1 of Registrant’s Current Report on Form 8-K, filed on August 5, 2020.) | |
| | |
| Executive Services Agreement, dated April 22, 2022, by and between 3D Systems Corporation and Wayne Pensky. (Incorporated by reference to Exhibit 10.1 of the Registrants Current Report on Form 8-K, filed on April 26, 2022.) | |
| Executive Employment Agreement dated August 4, 2022, by and between 3D Systems Corporation and Michael Turner. (Incorporated by reference to Exhibit 10.1 of the Registrant's Current Report on Form 8-K, filed on August 5, 2022.) | |
| | |
| Executive Employment Agreement dated December 7, 2022, by and between 3D Systems Corporation and Joseph Zuiker. (Incorporated by reference to Exhibit 10.1 of the Registrant's Current Report on Form 8-K, filed on December 9, 2022.) | |
| | |
| 3D Systems Corporation Non-Employee Director Deferred Compensation Plan, dated December 14, 2022.
| |
| | |
| Subsidiaries of Registrant. | |
| | |
| Consent of Independent Registered Public Accounting Firm. | |
| | | | | | |
| | |
| Certification of Principal Executive Officer filed pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, dated March 1, 2022.16, 2023. | |
| | |
| Certification of Principal Financial Officer filed pursuant to Section 302 of the Sarbanes-Oxley Act of 2002, dated March 1, 2022.16, 2023. | |
| | |
| Certification of Principal Executive Officer filed pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, dated March 1, 2022.16, 2023. | |
| | |
| Certification of Principal Financial Officer filed pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, dated March 1, 2022.16, 2023. | |
| | |
| 101.INS† | Inline XBRL Instance Document - the instance document does not appear in the Interactive Data file because the its XBRL tags are embedded within the Inline XBRL document.In | |
| | |
| 101.SCH† | Inline XBRL Taxonomy Extension Scheme Document | |
| | |
| 101.CAL† | Inline XBRL Taxonomy Extension Calculation Linkbase Document | |
| | |
| 101.DEF† | Inline XBRL Taxonomy Extension Definition Linkbase Document | |
| | |
| 101.LAB† | Inline XBRL Taxonomy Extension Label Linkbase Document | |
| | |
| 101.PRE† | XBRL Taxonomy Extension Presentation Linkbase Document | |
| | |
| 104 | Cover Page Interactive Data File - this data file does not appear in the Interactive Data file because its XBRL tags are embedded within the Inline XBRL document. | |
| | |
* Management contract or compensatory plan or arrangement
† Exhibits filed herein. All exhibits not so designated are incorporated by reference to a prior filing, as indicated.
Item 16. Form 10-K Summary
None.
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on our behalf by the undersigned, thereunto duly authorized.
| | | | | | | | |
| | 3D Systems Corporation |
| By: | /s/ DR. JEFFREY A. GRAVES |
| | Dr. Jeffrey A. Graves |
| | President, Chief Executive Officer and Director |
| Date: | March 1, 202216, 2023 |
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of registrant and in the capacities and on the dates indicated.
| | | | | | | | |
| Signature | Title | Date |
| | |
| /s/ DR. JEFFREY A. GRAVES | Chief Executive Officer, President and Director | March 1, 202216, 2023 |
| Dr. Jeffrey A. Graves | (principal executive officer) | |
| | |
/s/ JAGTAR NARULAMICHAEL TURNER | Executive Vice President and Chief Financial Officer | March 1, 202216, 2023 |
Jagtar NarulaMichael Turner | (principal financial officer) | |
| | |
| /s/ CHARLES W. HULL | Executive Vice President, Chief Technology | March 1, 202216, 2023 |
| Charles W. Hull | Officer and Director | |
| | |
/s/ MICHAEL CRIMMINS | Senior Vice President, Chief Accounting Officer | March 1, 2022 |
Michael Crimmins | (principal accounting officer) Emeritus | |
| | |
| /s/ CHARLES G. MCCLURE, JR | Chairman of the Board of Directors | March 1, 202216, 2023 |
| Charles G. McClure, Jr. | | |
| | |
| /s/ MALISSIA R. CLINTON | Director | March 1, 202216, 2023 |
| Malissia R. Clinton | | |
| | |
| /s/ WILLIAM E. CURRAN | Director | March 1, 202216, 2023 |
| William E. Curran | | |
| | |
| /s/ CLAUDIA N. DRAYTON | Director | March 1, 202216, 2023 |
| Claudia N. Drayton | | |
| | |
| /s/ THOMAS W. ERICKSON | Director | March 1, 202216, 2023 |
| Thomas W. Erickson | | |
| | |
/s/ WILLIAM D. HUMES | Director | March 1, 2022 |
William D. Humes | | |
| | |
| /s/ JIM D. KEVER | Director | March 1, 202216, 2023 |
| Jim D. Kever | | |
| | |
| /s/ KEVIN S. MOORE | Director | March 1, 202216, 2023 |
| Kevin S. Moore | | |
| | |
| /s/ DR. VASANT PADMANABHAN | Director | March 1, 202216, 2023 |
| Dr. Vasant Padmanabhan | | |
| | |
| /s/ JOHN J. TRACY | Director | March 1, 202216, 2023 |
| Dr. John J. Tracy | | |
| | |
/s/ JEFFREY WADSWORTH | Director | March 1, 2022 |
Dr. Jeffrey Wadsworth | | |
3D Systems Corporation
Index to Consolidated Financial Statements
| | | | | |
| Consolidated Financial Statements | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
Report of Independent Registered Public Accounting Firm
Report of Independent Registered Public Accounting Firm
Shareholders and Board of Directors
3D Systems Corporation
Rock Hill, South Carolina
Opinion on the Consolidated Financial Statements
We have audited the accompanying consolidated balance sheets of 3D Systems Corporation (the “Company”) as of December 31, 20212022 and 2020,2021, the related consolidated statements of operations, comprehensive (loss) income, (loss), stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2021,2022, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company at December 31, 20212022 and 2020,2021, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2021,2022, in conformity with accounting principles generally accepted in the United States of America.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the Company's internal control over financial reporting as of December 31, 2021,2022, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) and our report dated March 1, 202216, 2023 expressed an adverse opinion thereon.
Basis for Opinion
These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud.
Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.
Critical Audit MattersMatter
The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of the critical audit mattersmatter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit mattersmatter below, providing separate opinions on the critical audit mattersmatter or on the accounts or disclosures to which they relate.it relates.
Revenue from Collaboration and Licensing Agreements
As described in Note 5 to the consolidated financial statements, the Company recognizes revenue when control of the promised products or services is transferred to customers in an amount that reflects the consideration the Company expects to receive in exchange for those products or services. The Company recognized revenue of approximately $6.8$13.5 million related to collaboration arrangementsagreements with customers for the year ended December 31, 2021. The nature of the activities performed, and consideration exchanged through the Company’s collaborative agreements, varies such that certain agreements meet the definition of customer relationships for which revenue is recorded, while others do not meet this definition.2022. The Company’s collaborative
revenue contractscollaboration agreements may contain multiple performance obligations and may contain fees for licensing, research and development services, contingent milestone payments upon achievement of developmental contractual criteria, and/or royalty fees based on the licensees' product revenue.
We identified revenue recognition from collaborativecollaboration agreements with customers as a critical audit matter. Management makes significant judgments in identifying customer relationships and in determiningestimating variable consideration to determine appropriate revenue recognition for its collaborativecollaboration agreements with customers, including the evaluation of distinct performance obligations, the identification and evaluation of material rights, the estimation of variable consideration, and the determination of the pattern of transfer of control for each distinct performance obligation.customers. Auditing management’s judgments and estimates required significant audit effort and auditor subjectivity and in addition, as described in the “Opinion on Internal Control over Financial Reporting” section above, a material weakness was identified that encompasses this matter.subjectivity.
The primary procedures we performed to address this critical audit matter included:
•AssessingTesting the completenessdesign and operating effectiveness of collaboration arrangements that require assessment for proper accounting treatment by inspecting Company press releases, Committee meeting minutes,internal controls relating to the estimation of variable consideration and credits within Research & Development expense general ledger accounts.
•Evaluating the reasonableness of management’s judgments to determine whether customer relationships exist in its collaborative arrangements.
•Examining a sample of revenue contracts and other source documents to test management's identification of significant terms for completeness and assessing the appropriateness of the treatment for such terms, includinginputs and assumptions to the identification of distinct performance obligations, material rights, and variable consideration.revenue recognition calculations.
•Evaluating the reasonableness of management’s judgments and estimates to calculate variable consideration, and the timing of recognizing the related revenue subject to any constraints.
•Evaluating the appropriateness of management’s determination of whether identified performance obligations meet the criteria for over-time revenue recognition.
•Evaluating the appropriateness of the method used to recognize revenue and testingTesting the relevant inputs and assumptions to the revenue recognition calculations.
•Confirming relevant terms of the agreements, including the absence of side agreements, directly with the customer.
/s/ BDO USA, LLP
We have served as the Company's auditor since 2003.
/s/ BDO USA, LLP
Charlotte, North Carolina
March 1, 2022
16, 2023
Report of Independent Registered Public Accounting Firm
Report of Independent Registered Public Accounting Firm
Shareholders and Board of Directors
3D Systems Corporation
Rock Hill, South Carolina
Opinion on Internal Control over Financial Reporting
We have audited 3D System Corporation’s (the “Company’s”) internal control over financial reporting as of December 31, 2021,2022, based on criteria established in Internal Control – Integrated Framework(2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (the “COSO criteria”). In our opinion, the Company did not maintain, in all material respects, effective internal control over financial reporting as of December 31, 2021,2022, based on the COSO criteria.
We do not express an opinion or any other form of assurance on management’s statements referring to any corrective actions taken by the Company after the date of management’s assessment.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the consolidated balance sheets of the Company as of December 31, 20212022 and 2020,2021, the related consolidated statements of operations, comprehensive (loss) income, (loss), stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2021,2022, and the related notes (collectively referred to as “the consolidated financial statements”) and our report dated March 1, 202216, 2023 expressed an unqualified opinion thereon.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying “Item 9A, Management’s Report on Internal Control over Financial Reporting”. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit of internal control over financial reporting in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
As indicated in the accompanying Item 9A, Management’s Report on Internal Control over Financial Reporting, management’s assessment of and conclusion on the effectiveness of internal control over financial reporting did not include the internal controls of Kumovis GmbH “Kumovis” and Titan Additives LLC “Titan” which were acquired on April 1, 2022 and dp polar GmbH “dp polar” which was acquired on October 4, 2022, and which is included in the consolidated balance sheet of the Company as of December 31, 2022, the related consolidated statements of operations, comprehensive (loss) income, stockholders’ equity, and cash flows for the year ended December 31, 2022, and the related notes. Kumovis, Titan, and dp polar constituted 3.2%, 2.8%, and 2.2% of total assets, respectively, as of December 31, 2022, and 0.1%, 0.2%, and 0.0% of revenues, respectively, for the year then ended. Management did not assess the effectiveness of internal control over financial reporting of Kumovis, Titan, and dp polar because of the timing of the acquisitions which were completed on April 1, 2022, and October 4, 2022. Our audit of internal control over financial reporting of the Company also did not include an evaluation of the internal control over financial reporting of Kumovis, Titan, and dp polar.
A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the company’s annual or interim financial statements will not be prevented or detected on a timely basis. Material weaknesses regarding management’s failure to design and maintain controls over revenue, receivables and deferred revenue, including the identificationinput of executed contract terms into the Company’s information systems that perform revenue recognition and the review of contracts with financial accounting implications,internally prepared reports and analyses utilized in the financial reporting and closeclosing process and accounting for income taxes, including non-routine transactions have been identified and described in management’s assessment. These material weaknesses were considered in determining the nature, timing, and extent of audit tests applied in our audit of the 20212022 consolidated financial statements, and this report does not affect our report dated March 1, 202216, 2023 on those financial statements.
Definition and Limitations of Internal Control over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
/s/ BDO USA, LLP
Charlotte, North Carolina
March 1, 202216, 2023
3D SYSTEMS CORPORATION
CONSOLIDATED BALANCE SHEETS | | (In thousands, except par value) | December 31, 2021 | | December 31, 2020 | |
| (in thousands, except par value) | | (in thousands, except par value) | December 31, 2022 | | December 31, 2021 |
| ASSETS | ASSETS | | | | ASSETS | | | |
| Current assets: | Current assets: | | Current assets: | |
| Cash and cash equivalents | Cash and cash equivalents | $ | 789,657 | | | $ | 75,010 | | Cash and cash equivalents | $ | 388,134 | | | $ | 789,657 | |
| Accounts receivable, net of reserves — $2,445 and $4,392 | 106,540 | | | 114,254 | | |
| Short-term investments | | Short-term investments | 180,603 | | | — | |
| Accounts receivable, net of reserves — $3,114 and $2,445 | | Accounts receivable, net of reserves — $3,114 and $2,445 | 93,886 | | | 106,540 | |
| Inventories | Inventories | 92,887 | | | 116,667 | | Inventories | 137,832 | | | 92,887 | |
| Prepaid expenses and other current assets | Prepaid expenses and other current assets | 42,653 | | | 33,145 | | Prepaid expenses and other current assets | 33,790 | | | 42,653 | |
| Current assets held for sale | — | | | 18,439 | | |
| | Total current assets | Total current assets | 1,031,737 | | | 357,515 | | Total current assets | 834,245 | | | 1,031,737 | |
| Property and equipment, net | Property and equipment, net | 57,257 | | | 75,356 | | Property and equipment, net | 58,072 | | | 57,257 | |
| Intangible assets, net | Intangible assets, net | 45,835 | | | 28,083 | | Intangible assets, net | 90,230 | | | 45,835 | |
| Goodwill | Goodwill | 345,588 | | | 161,765 | | Goodwill | 385,312 | | | 345,588 | |
| Right of use assets | 46,356 | | | 48,620 | | |
| Right-of-use assets | | Right-of-use assets | 42,746 | | | 46,356 | |
| Deferred income tax asset | Deferred income tax asset | 5,054 | | | 6,247 | | Deferred income tax asset | 7,038 | | | 5,054 | |
| Assets held for sale | — | | | 31,684 | | |
| | Other assets | Other assets | 17,272 | | | 23,785 | | Other assets | 28,970 | | | 17,272 | |
| Total assets | Total assets | $ | 1,549,099 | | | $ | 733,055 | | Total assets | $ | 1,446,613 | | | $ | 1,549,099 | |
| LIABILITIES AND EQUITY | | | | |
| LIABILITIES, REDEEMABLE NON-CONTROLLING INTEREST AND EQUITY | | LIABILITIES, REDEEMABLE NON-CONTROLLING INTEREST AND EQUITY | | | |
| Current liabilities: | Current liabilities: | | Current liabilities: | |
| Current portion of long term debt | $ | — | | | $ | 2,051 | | |
| Current right of use liabilities | 8,344 | | | 9,534 | | |
| | Current lease liabilities | | Current lease liabilities | $ | 9,036 | | | $ | 8,344 | |
| Accounts payable | Accounts payable | 57,366 | | | 45,174 | | Accounts payable | 53,826 | | | 57,366 | |
| Accrued and other liabilities | Accrued and other liabilities | 76,994 | | | 69,812 | | Accrued and other liabilities | 55,571 | | | 76,994 | |
| | Customer deposits | Customer deposits | 7,281 | | | 7,750 | | Customer deposits | 6,911 | | | 7,281 | |
| Deferred revenue | Deferred revenue | 28,027 | | | 30,302 | | Deferred revenue | 26,464 | | | 28,027 | |
| Current liabilities held for sale | — | | | 11,107 | | |
| | Total current liabilities | Total current liabilities | 178,012 | | | 175,730 | | Total current liabilities | 151,808 | | | 178,012 | |
| Long-term debt, net | — | | | 19,218 | | |
| Convertible notes payable, net | 446,859 | | | — | | |
| Long-term right of use liabilities | 47,420 | | | 48,469 | | |
| | Long-term debt, net of deferred financing costs | | Long-term debt, net of deferred financing costs | 449,510 | | | 446,859 | |
| Long-term lease liabilities | | Long-term lease liabilities | 41,779 | | | 47,420 | |
| Deferred income tax liability | Deferred income tax liability | 2,173 | | | 4,716 | | Deferred income tax liability | 7,631 | | | 2,173 | |
| Liabilities held for sale | — | | | 2,952 | | |
| | Other liabilities | Other liabilities | 32,254 | | | 51,247 | | Other liabilities | 44,181 | | | 32,254 | |
| Total liabilities | Total liabilities | 706,718 | | | 302,332 | | Total liabilities | 694,909 | | | 706,718 | |
| Commitments and contingencies (Note 23) | | Commitments and contingencies (Note 23) | |
| Redeemable non-controlling interest | | Redeemable non-controlling interest | 1,760 | | | — | |
| Stockholders’ equity: | | Stockholders’ equity: | |
| Common stock, $0.001 par value, authorized 220,000 shares; shares issued 131,207 and 128,375 as of December 31, 2022 and 2021, respectively | | Common stock, $0.001 par value, authorized 220,000 shares; shares issued 131,207 and 128,375 as of December 31, 2022 and 2021, respectively | 131 | | | 128 | |
| Additional paid-in capital | | Additional paid-in capital | 1,547,597 | | | 1,501,210 | |
| | Commitments and contingencies (Note 23) | 0 | | 0 | |
| Stockholders’ equity: | | |
| Common stock, $0.001 par value, authorized 220,000 shares; issued 128,375 and 127,626 | 128 | | | 128 | | |
| Additional paid-in capital | 1,501,210 | | | 1,404,964 | | |
| Treasury stock, at cost — 0 shares and 3,494 shares | — | | | (22,590) | | |
| Accumulated deficit | Accumulated deficit | (621,251) | | | (943,303) | | Accumulated deficit | (743,962) | | | (621,251) | |
| Accumulated other comprehensive loss | Accumulated other comprehensive loss | (37,706) | | | (8,476) | | Accumulated other comprehensive loss | (53,822) | | | (37,706) | |
| Total stockholders’ equity | Total stockholders’ equity | 842,381 | | | 430,723 | | Total stockholders’ equity | 749,944 | | | 842,381 | |
| Total liabilities and stockholders’ equity | $ | 1,549,099 | | | $ | 733,055 | | |
| Total liabilities, redeemable non-controlling interest and stockholders’ equity | | Total liabilities, redeemable non-controlling interest and stockholders’ equity | $ | 1,446,613 | | | $ | 1,549,099 | |
See accompanying notes to consolidated financial statements.
3D SYSTEMS CORPORATION
CONSOLIDATED STATEMENTS OF OPERATIONS
| | | Year Ended December 31, | | Year Ended December 31, | |
| (in thousands, except per share amounts) | (in thousands, except per share amounts) | 2021 | | 2020 | | 2019 | (in thousands, except per share amounts) | 2022 | | 2021 | | 2020 | |
| Revenue: | Revenue: | | | | | | Revenue: | | | | | | |
| Products | Products | $ | 428,742 | | | $ | 332,799 | | | $ | 389,337 | | Products | $ | 395,396 | | | $ | 428,742 | | | $ | 332,799 | | |
| Services | Services | 186,897 | | | 224,441 | | | 247,017 | | Services | 142,635 | | | 186,897 | | | 224,441 | | |
| Total revenue | Total revenue | 615,639 | | | 557,240 | | | 636,354 | | Total revenue | 538,031 | | | 615,639 | | | 557,240 | | |
| Cost of sales: | Cost of sales: | | Cost of sales: | | |
| Products | Products | 245,169 | | | 220,415 | | | 234,581 | | Products | 237,386 | | | 245,169 | | | 220,415 | | |
| Services | Services | 106,692 | | | 113,450 | | | 121,232 | | Services | 86,412 | | | 106,692 | | | 113,450 | | |
| Total cost of sales | Total cost of sales | 351,861 | | | 333,865 | | | 355,813 | | Total cost of sales | 323,798 | | | 351,861 | | | 333,865 | | |
| Gross profit | Gross profit | 263,778 | | | 223,375 | | | 280,541 | | Gross profit | 214,233 | | | 263,778 | | | 223,375 | | |
| Operating expenses: | Operating expenses: | | Operating expenses: | | |
| Selling, general and administrative | Selling, general and administrative | 227,697 | | | 219,895 | | | 254,355 | | Selling, general and administrative | 244,181 | | | 227,697 | | | 219,895 | | |
| Research and development | Research and development | 69,150 | | | 74,143 | | | 83,290 | | Research and development | 87,071 | | | 69,150 | | | 74,143 | | |
| Impairment of goodwill | Impairment of goodwill | — | | | 48,300 | | | — | | Impairment of goodwill | — | | | — | | | 48,300 | | |
| Total operating expenses | Total operating expenses | 296,847 | | | 342,338 | | | 337,645 | | Total operating expenses | 331,252 | | | 296,847 | | | 342,338 | | |
| Loss from operations | Loss from operations | (33,069) | | | (118,963) | | | (57,104) | | Loss from operations | (117,019) | | | (33,069) | | | (118,963) | | |
| Interest and other income (expense), net | 352,609 | | | (24,447) | | | (7,996) | | |
| Income (loss) before income taxes | 319,540 | | | (143,410) | | | (65,100) | | |
| Benefit (provision) for income taxes | 2,512 | | | (6,184) | | | (4,532) | | |
| Net income (loss) | 322,052 | | | (149,594) | | | (69,632) | | |
| Less: net income attributable to noncontrolling interests | — | | | — | | | 248 | | |
| Net income (loss) attributable to 3D Systems Corporation | $ | 322,052 | | | $ | (149,594) | | | $ | (69,880) | | |
| Interest and other (expense) income, net | | Interest and other (expense) income, net | (3,790) | | | 352,609 | | | (24,447) | | |
| (Loss) income before income taxes | | (Loss) income before income taxes | (120,809) | | | 319,540 | | | (143,410) | | |
| (Provision) benefit for income taxes | | (Provision) benefit for income taxes | (2,140) | | | 2,512 | | | (6,184) | | |
| Net (loss) income before redeemable non-controlling interest | | Net (loss) income before redeemable non-controlling interest | (122,949) | | | 322,052 | | | (149,594) | | |
| Less: net (loss) attributable to redeemable non-controlling interest | | Less: net (loss) attributable to redeemable non-controlling interest | (238) | | | — | | | — | | |
| Net (loss) income attributable to 3D Systems Corporation | | Net (loss) income attributable to 3D Systems Corporation | $ | (122,711) | | | $ | 322,052 | | | $ | (149,594) | | |
| | Net income (loss) per share available to 3D Systems Corporation common stockholders | | |
| Net (loss) income per common share: | | Net (loss) income per common share: | | |
| Basic | Basic | $ | 2.62 | | | $ | (1.27) | | | $ | (0.61) | | Basic | $ | (0.96) | | | $ | 2.62 | | | $ | (1.27) | | |
| Diluted | Diluted | $ | 2.55 | | | $ | 1.27 | | | $ | (0.61) | | Diluted | $ | (0.96) | | | $ | 2.55 | | | $ | (1.27) | | |
| | Weighted average shares outstanding: | | Weighted average shares outstanding: | | |
| Basic | | Basic | 127,818 | | | 122,867 | | | 117,579 | | |
| Diluted | | Diluted | 127,818 | | | 126,334 | | | 117,579 | | |
See accompanying notes to consolidated financial statements.
3D SYSTEMS CORPORATION
CONSOLIDATED STATEMENTS OF COMPREHENSIVE (LOSS) INCOME (LOSS) | | | | | | | | | | | | | | | | | |
| Year Ended December 31, |
| (in thousands, except per share amounts) | 2021 | | 2020 | | 2019 |
| Net income (loss) | $ | 322,052 | | | $ | (149,594) | | | $ | (69,632) | |
| Other comprehensive income (loss), net of taxes: | | | | | |
| Pension adjustments | 682 | | | 783 | | | (1,060) | |
| Derivative financial instruments | 721 | | | (403) | | | (318) | |
| Foreign currency translation | (39,546) | | | 28,752 | | | 2,996 | |
| Foreign currency translation reclassification - sales of Cimatron and Simbionix | 8,912 | | | — | | | — | |
| Total other comprehensive (loss) income, net of taxes: | (29,231) | | | 29,132 | | | 1,618 | |
| Total comprehensive income (loss), net of taxes | 292,821 | | | (120,462) | | | (68,014) | |
| Comprehensive income attributable to noncontrolling interests | — | | | — | | | 191 | |
| Comprehensive income (loss) attributable to 3D Systems Corporation | $ | 292,821 | | | $ | (120,462) | | | $ | (68,205) | |
| | | | | | | | | | | | | | | | | |
| Year Ended December 31, |
| (in thousands) | 2022 | | 2021 | | 2020 |
| Net (loss) income before redeemable non-controlling interest | $ | (122,949) | | | $ | 322,052 | | | $ | (149,594) | |
| Other comprehensive (loss) income, net of taxes: | | | | | |
| Pension plan adjustments | 2,942 | | | 682 | | | 783 | |
| Derivative financial instruments | — | | | 721 | | | (403) | |
| Foreign currency translation | (18,730) | | | (39,546) | | | 28,752 | |
| Unrealized loss on short-term investments | (328) | | | — | | | — | |
| Foreign currency translation reclassification - sales of businesses | — | | | 8,912 | | | — | |
| Total other comprehensive (loss) income, net of taxes: | (16,116) | | | (29,231) | | | 29,132 | |
| Total comprehensive (loss) income, net of taxes | (139,065) | | | 292,821 | | | (120,462) | |
| Less: comprehensive loss attributable to redeemable non-controlling interest | (238) | | | — | | | — | |
| Comprehensive (loss) income attributable to 3D Systems Corporation | $ | (138,827) | | | $ | 292,821 | | | $ | (120,462) | |
See accompanying notes to consolidated financial statements.
3D SYSTEMS CORPORATION
CONSOLIDATED STATEMENTS OF CASH FLOWS | | | Year Ended December 31, | | Year Ended December 31, |
| (in thousands) | (in thousands) | 2021 | | 2020 | | 2019 | (in thousands) | 2022 | | 2021 | | 2020 |
| Cash flows from operating activities: | Cash flows from operating activities: | | | | | | Cash flows from operating activities: | | | | | |
| Net income (loss) | $ | 322,052 | | | $ | (149,594) | | | $ | (69,632) | | |
| Adjustments to reconcile net income (loss) to net cash provided by (used in) operating activities: | | |
| Depreciation and amortization | 34,623 | | | 44,595 | | | 50,396 | | |
| Net (loss) income before redeemable non-controlling interest | | Net (loss) income before redeemable non-controlling interest | $ | (122,949) | | | $ | 322,052 | | | $ | (149,594) | |
| Adjustments to reconcile net (loss) income to net cash (used in) provided by operating activities: | | Adjustments to reconcile net (loss) income to net cash (used in) provided by operating activities: | |
| Depreciation, amortization and accretion of debt discount | | Depreciation, amortization and accretion of debt discount | 38,686 | | | 34,623 | | | 44,595 | |
| Stock-based compensation | Stock-based compensation | 55,153 | | | 17,725 | | | 23,587 | | Stock-based compensation | 42,415 | | | 55,153 | | | 17,725 | |
| | Loss on short-term investments | | Loss on short-term investments | 3,146 | | | — | | | — | |
| Non-cash operating lease expense | | Non-cash operating lease expense | 6,366 | | | 5,681 | | | — | |
| Provision for inventory obsolescence and revaluation | Provision for inventory obsolescence and revaluation | (2,909) | | | 12,373 | | | — | | Provision for inventory obsolescence and revaluation | 2,586 | | | (2,909) | | | 12,373 | |
| Loss on hedge accounting de-designation and termination | Loss on hedge accounting de-designation and termination | 721 | | | 1,235 | | | — | | Loss on hedge accounting de-designation and termination | — | | | 721 | | | 1,235 | |
| Provision for bad debts | Provision for bad debts | 232 | | | 457 | | | 1,308 | | Provision for bad debts | 562 | | | 232 | | | 457 | |
| (Gain) Loss on the disposition of businesses, property, equipment and other assets | (350,846) | | | 5,274 | | | 2,282 | | |
| Provision for deferred income taxes and reserve adjustments | (11,679) | | | (1,206) | | | (3,354) | | |
| Impairment of goodwill and assets | 1,676 | | | 55,484 | | | 1,728 | | |
| Loss (gain) on the disposition of businesses, property, equipment and other assets | | Loss (gain) on the disposition of businesses, property, equipment and other assets | 104 | | | (350,846) | | | 5,274 | |
| Benefit for deferred income taxes and reserve adjustments | | Benefit for deferred income taxes and reserve adjustments | (2,518) | | | (11,679) | | | (1,206) | |
| Asset impairment | | Asset impairment | 4,095 | | | 1,676 | | | 55,484 | |
| Changes in operating accounts: | Changes in operating accounts: | | Changes in operating accounts: | |
| Accounts receivable | Accounts receivable | (11,912) | | | (6,052) | | | 15,071 | | Accounts receivable | 8,144 | | | (11,912) | | | (6,052) | |
| Inventories | Inventories | 7,866 | | | (9,901) | | | 18,447 | | Inventories | (51,082) | | | 7,866 | | | (9,901) | |
| Prepaid expenses and other current assets | Prepaid expenses and other current assets | (8,106) | | | (16,218) | | | 9,150 | | Prepaid expenses and other current assets | 8,229 | | | (8,106) | | | (16,218) | |
| Accounts payable | Accounts payable | 27,159 | | | (6,653) | | | (16,846) | | Accounts payable | (3,787) | | | 27,159 | | | (6,653) | |
| Deferred revenue and customer deposits | Deferred revenue and customer deposits | (3,325) | | | 3,231 | | | 677 | | Deferred revenue and customer deposits | (6,947) | | | (3,325) | | | 3,231 | |
| Accrued and other liabilities | Accrued and other liabilities | (12,389) | | | 28,286 | | | (1,346) | | Accrued and other liabilities | 10,702 | | | (12,389) | | | 28,286 | |
| All other operating activities | All other operating activities | (169) | | | 843 | | | 113 | | All other operating activities | (7,773) | | | (5,850) | | | 843 | |
| Net cash provided by (used in) operating activities | 48,147 | | | (20,121) | | | 31,581 | | |
| Net cash (used in) provided by operating activities | | Net cash (used in) provided by operating activities | (70,021) | | | 48,147 | | | (20,121) | |
| Cash flows from investing activities: | Cash flows from investing activities: | | | | Cash flows from investing activities: | | | | | |
| Purchases of property and equipment | Purchases of property and equipment | (18,791) | | | (13,643) | | | (23,985) | | Purchases of property and equipment | (20,907) | | | (18,791) | | | (13,643) | |
| Proceeds from sale of assets and businesses, net of cash | 421,485 | | | 1,554 | | | 1,620 | | |
| | Business acquisitions, net of cash acquired | (139,685) | | | — | | | — | | |
| Purchases of short-term investments | | Purchases of short-term investments | (384,388) | | | — | | | — | |
| Sales and maturities of short-term investments | | Sales and maturities of short-term investments | 200,314 | | | — | | | — | |
| Proceeds from sale of assets and businesses, net of cash sold | | Proceeds from sale of assets and businesses, net of cash sold | 325 | | | 421,485 | | | 1,554 | |
| Acquisitions and other investments, net of cash acquired | | Acquisitions and other investments, net of cash acquired | (103,699) | | | (139,685) | | | — | |
| Other investing activities | Other investing activities | (2,454) | | | 356 | | | (2,007) | | Other investing activities | — | | | (2,454) | | | 356 | |
| Net cash provided by (used in) investing activities | 260,555 | | | (11,733) | | | (24,372) | | |
| Net cash (used in) provided by investing activities | | Net cash (used in) provided by investing activities | (308,355) | | | 260,555 | | | (11,733) | |
| Cash flows from financing activities: | Cash flows from financing activities: | | | | Cash flows from financing activities: | | | | | |
| Proceeds from revolving credit facilities | Proceeds from revolving credit facilities | — | | | 20,000 | | | — | | Proceeds from revolving credit facilities | — | | | — | | | 20,000 | |
| Payments on revolving credit facilities | Payments on revolving credit facilities | — | | | (20,000) | | | — | | Payments on revolving credit facilities | — | | | — | | | (20,000) | |
| Proceeds from borrowings | Proceeds from borrowings | 460,000 | | | — | | | 100,000 | | Proceeds from borrowings | — | | | 460,000 | | | — | |
| Debt issuance costs | Debt issuance costs | (13,466) | | | — | | | — | | Debt issuance costs | — | | | (13,466) | | | — | |
| Repayment of borrowings/long-term debt | Repayment of borrowings/long-term debt | (21,392) | | | (26,840) | | | (76,768) | | Repayment of borrowings/long-term debt | — | | | (21,392) | | | (26,840) | |
| Proceeds from issuance of common stock | Proceeds from issuance of common stock | — | | | 24,702 | | | — | | Proceeds from issuance of common stock | — | | | — | | | 24,702 | |
| Purchase of noncontrolling interests | (6,300) | | | (12,500) | | | (2,500) | | |
| | Payments related to net-share settlement of stock-based compensation | (12,619) | | | (5,138) | | | (3,194) | | |
| Purchase of non-controlling interests | | Purchase of non-controlling interests | (2,300) | | | (6,300) | | | (12,500) | |
| Taxes paid related to net-share settlement of equity awards | | Taxes paid related to net-share settlement of equity awards | (10,864) | | | (12,619) | | | (5,138) | |
| | Other financing activities | Other financing activities | (423) | | | 296 | | | (1,338) | | Other financing activities | (651) | | | (423) | | | 296 | |
| Net cash provided by (used in) financing activities | 405,800 | | | (19,480) | | | 16,200 | | |
| Net cash (used in) provided by financing activities | | Net cash (used in) provided by financing activities | (13,815) | | | 405,800 | | | (19,480) | |
| Effect of exchange rate changes on cash, cash equivalents and restricted cash | Effect of exchange rate changes on cash, cash equivalents and restricted cash | (9,243) | | | 1,428 | | | 289 | | Effect of exchange rate changes on cash, cash equivalents and restricted cash | (5,804) | | | (9,243) | | | 1,428 | |
| Net increase (decrease) in cash, cash equivalents and restricted cash | 705,259 | | | (49,906) | | | 23,698 | | |
| Net (decrease) increase in cash, cash equivalents and restricted cash | | Net (decrease) increase in cash, cash equivalents and restricted cash | (397,995) | | | 705,259 | | | (49,906) | |
Cash, cash equivalents and restricted cash at the beginning of the year a | Cash, cash equivalents and restricted cash at the beginning of the year a | 84,711 | | | 134,617 | | | 110,919 | | Cash, cash equivalents and restricted cash at the beginning of the year a | 789,970 | | | 84,711 | | | 134,617 | |
Cash, cash equivalents and restricted cash at the end of the year a | Cash, cash equivalents and restricted cash at the end of the year a | $ | 789,970 | | | $ | 84,711 | | | $ | 134,617 | | Cash, cash equivalents and restricted cash at the end of the year a | $ | 391,975 | | | $ | 789,970 | | | $ | 84,711 | |
customer
| | | | | | | | | | | | | | | | | |
| Supplemental cash flow information | | | | | |
| Lease assets obtained in exchange for new lease liabilities (excludes adoption) | $ | 4,502 | | | $ | 23,309 | | | $ | 8,662 | |
| Cash interest payments | 1,138 | | | 2,109 | | | 3,715 | |
| Cash income tax payments (receipts), net | 4,709 | | | 3,706 | | | 10,722 | |
Transfer of equipment from inventory to property and equipment, net b | 1,738 | | | 1,055 | | | 3,187 | |
Transfer of equipment to inventory from property and equipment, net c | — | | | — | | | 32 | |
| | | | | |
| Stock issued for acquisition | 99,044 | | | — | | | — | |
| Noncash financing activity | | | | | |
Purchase of noncontrolling interest d | $ | — | | | $ | — | | | (11,000) | |
| | | | | | | | | | | | | | | | | |
| Supplemental cash flow information | | | | | |
| Lease assets obtained in exchange for new lease liabilities | $ | 6,037 | | | $ | 4,502 | | | $ | 23,309 | |
| Cash interest payments | 196 | | | 1,138 | | | 2,109 | |
| Cash income tax payments, net | 5,330 | | | 4,709 | | | 3,706 | |
Transfer of equipment from inventory to property and equipment, net b | (2,004) | | | 1,738 | | | 1,055 | |
| | | | | |
| | | | | |
| Stock issued for acquisition | 7,091 | | | 99,044 | | | — | |
| | | | | |
| | | | | |
(a)The amounts for cash and cash equivalents shown above include restricted cash of $114, $313 $540 and $921$540 as of December 31, 2022, 2021 2020 and 2019,2020, respectively, which wereare included in Other assets, net,prepaid expenses and $9,161other current assets. In addition, included in cash and cash equivalents above as of December 31, 2022 is $3,727 of restricted cash, which, is included in other non-current assets. Finally, included in cash and cash equivalents above as of December 31, 2020 is $9,161, which was included in Currentcurrent assets held for sale in the consolidated balance sheets.sale.
(b)Inventory is transferred from inventory to property and equipment at cost when we require additional machines for training or demonstration or for placement into on demand manufacturing services locations.
(c)In general, an asset is transferred from Property and equipment, net, into inventory at its net book value when we have identified a potential sale for a used machine.
(d)Purchase of noncontrolling interest to be paid in installments over a four-year period recorded to Accrued and other liabilities and Other liabilities on the consolidated balance sheets.
See accompanying notes to consolidated financial statements.
3D SYSTEMS CORPORATION
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
Years Ended December 31, 2022, 2021 2020 and 20192020
| | | Common Stock | | | Common Stock | |
| (in thousands, except par value) | (in thousands, except par value) | Shares | | Par Value $0.001 | | Additional Paid In Capital | | Treasury Stock | | Accumulated Deficit | | Accumulated Other Comprehensive Income (Loss) | | Total 3D Systems Corporation Stockholders' Equity | | Equity Attributable to Noncontrolling Interests | | Total Stockholders' Equity | (in thousands, except par value) | Shares | | Par Value $0.001 | | Additional Paid-In Capital | | Treasury Stock | | Accumulated Deficit | | Accumulated Other Comprehensive Income (Loss) | | Total 3D Systems Corporation Stockholders' Equity | | Equity Attributable to Non-controlling Interests | | Total Stockholders' Equity |
| December 31, 2018 | 118,650 | | | $ | 117 | | | $ | 1,355,503 | | | $ | (15,572) | | | $ | (722,701) | | | $ | (38,978) | | | $ | 578,369 | | | $ | (2,382) | | | $ | 575,987 | | |
| Issuance (repurchase) of stock | 2,616 | | | 3 | | | — | | | (3,197) | | | — | | | — | | | (3,194) | | | — | | | (3,194) | | |
| Acquisition of non-controlling interest | — | | | — | | | (7,526) | | | — | | | — | | | 256 | | | (7,270) | | | (6,072) | | | (13,342) | | |
| Adjustment of RNCI carrying value | — | | | — | | | — | | | — | | | (1,128) | | | — | | | (1,128) | | | — | | | (1,128) | | |
| Stock-based compensation expense | — | | | — | | | 23,587 | | | — | | | — | | | — | | | 23,587 | | | — | | | 23,587 | | |
| Net (loss) | — | | | — | | | — | | | — | | | (69,880) | | | — | | | (69,880) | | | 248 | | | (69,632) | | |
| Pension adjustment | — | | | — | | | — | | | — | | | — | | | (1,060) | | | (1,060) | | | — | | | (1,060) | | |
| Derivative financial instrument adjustment | — | | | — | | | — | | | — | | | (318) | | | (318) | | | — | | | (318) | | |
| Foreign currency translation adjustment | — | | | — | | | — | | | — | | | — | | | 3,053 | | | 3,053 | | | (57) | | | 2,996 | | |
| December 31, 2019 | December 31, 2019 | 121,266 | | | 120 | | | 1,371,564 | | | (18,769) | | | (793,709) | | | (37,047) | | | 522,159 | | | (8,263) | | | 513,896 | | December 31, 2019 | 121,266 | | | $ | 120 | | | $ | 1,371,564 | | | $ | (18,769) | | | $ | (793,709) | | | $ | (37,047) | | | $ | 522,159 | | | $ | (8,263) | | | $ | 513,896 | |
| Issuance (repurchase) of stock | Issuance (repurchase) of stock | 6,360 | | | 8 | | | 23,377 | | | (3,821) | | | — | | | — | | | 19,564 | | | — | | | 19,564 | | Issuance (repurchase) of stock | 6,360 | | | 8 | | | 23,377 | | | (3,821) | | | — | | | — | | | 19,564 | | | — | | | 19,564 | |
| Acquisition of non-controlling interest | Acquisition of non-controlling interest | — | | | — | | | (7,702) | | | — | | | — | | | (561) | | | (8,263) | | | 8,263 | | | — | | Acquisition of non-controlling interest | — | | | — | | | (7,702) | | | — | | | — | | | (561) | | | (8,263) | | | 8,263 | | | — | |
| Stock-based compensation expense | Stock-based compensation expense | — | | | — | | | 17,725 | | | — | | | — | | | — | | | 17,725 | | | — | | | 17,725 | | Stock-based compensation expense | — | | | — | | | 17,725 | | | — | | | — | | | — | | | 17,725 | | | — | | | 17,725 | |
| Net (loss) | — | | | — | | | — | | | — | | | (149,594) | | | — | | | (149,594) | | | — | | | (149,594) | | |
| Pension adjustment | — | | | — | | | — | | | — | | | — | | | 783 | | | 783 | | | — | | | 783 | | |
| Net (loss) attributable to 3D Systems Corp. | | Net (loss) attributable to 3D Systems Corp. | — | | | — | | | — | | | — | | | (149,594) | | | — | | | (149,594) | | | — | | | (149,594) | |
| Pension plan adjustment | | Pension plan adjustment | — | | | — | | | — | | | — | | | — | | | 783 | | | 783 | | | — | | | 783 | |
| Derivative financial instrument adjustment | Derivative financial instrument adjustment | — | | | — | | | — | | | — | | | — | | | (1,638) | | | (1,638) | | | — | | | (1,638) | | Derivative financial instrument adjustment | — | | | — | | | — | | | — | | | — | | | (1,638) | | | (1,638) | | | — | | | (1,638) | |
| De-designation of derivative instrument | De-designation of derivative instrument | — | | | — | | | — | | | — | | | — | | | 1,235 | | | 1,235 | | | — | | | 1,235 | | De-designation of derivative instrument | — | | | — | | | — | | | — | | | — | | | 1,235 | | | 1,235 | | | — | | | 1,235 | |
| Foreign currency translation adjustment | Foreign currency translation adjustment | — | | | — | | | — | | | — | | | — | | | 28,752 | | | 28,752 | | | — | | | 28,752 | | Foreign currency translation adjustment | — | | | — | | | — | | | — | | | — | | | 28,752 | | | 28,752 | | | — | | | 28,752 | |
| December 31, 2020 | December 31, 2020 | 127,626 | | | 128 | | | 1,404,964 | | | (22,590) | | | (943,303) | | | (8,476) | | | 430,723 | | | — | | | 430,723 | | December 31, 2020 | 127,626 | | | 128 | | | 1,404,964 | | | (22,590) | | | (943,303) | | | (8,476) | | | 430,723 | | | — | | | 430,723 | |
| Issuance (repurchase) of stock | Issuance (repurchase) of stock | 813 | | | — | | | (12,620) | | | — | | | — | | | — | | | (12,620) | | | — | | | (12,620) | | Issuance (repurchase) of stock | 813 | | | — | | | (12,620) | | | — | | | — | | | — | | | (12,620) | | | — | | | (12,620) | |
| Shares issued to acquire assets and businesses | Shares issued to acquire assets and businesses | 3,430 | | | 3 | | | 99,041 | | | — | | | — | | | — | | | 99,044 | | | — | | | 99,044 | | Shares issued to acquire assets and businesses | 3,430 | | | 3 | | | 99,041 | | | — | | | — | | | — | | | 99,044 | | | — | | | 99,044 | |
| Stock-based compensation expense | Stock-based compensation expense | — | | | — | | | 32,412 | | | — | | | — | | | — | | | 32,412 | | | — | | | 32,412 | | Stock-based compensation expense | — | | | — | | | 32,412 | | | — | | | — | | | — | | | 32,412 | | | — | | | 32,412 | |
| Net income | — | | | — | | | — | | | — | | | 322,052 | | | — | | | 322,052 | | | — | | | 322,052 | | |
| Pension adjustment | — | | | — | | | — | | | — | | | — | | | 181 | | | 181 | | | — | | | 181 | | |
| Net income attributable to 3D Systems Corp. | | Net income attributable to 3D Systems Corp. | — | | | — | | | — | | | — | | | 322,052 | | | — | | | 322,052 | | | — | | | 322,052 | |
| Pension plan adjustment | | Pension plan adjustment | — | | | — | | | — | | | — | | | — | | | 181 | | | 181 | | | — | | | 181 | |
| Gain on pension plan - unrealized | Gain on pension plan - unrealized | — | | | — | | | — | | | — | | | — | | | 501 | | | 501 | | | — | | | 501 | | Gain on pension plan - unrealized | — | | | — | | | — | | | — | | | — | | | 501 | | | 501 | | | — | | | 501 | |
| De-designation of derivative instrument | De-designation of derivative instrument | — | | | — | | | — | | | — | | | — | | | 721 | | | 721 | | | — | | | 721 | | De-designation of derivative instrument | — | | | — | | | — | | | — | | | — | | | 721 | | | 721 | | | — | | | 721 | |
| Retirement of treasury shares | Retirement of treasury shares | (3,494) | | | (3) | | | (22,587) | | | 22,590 | | | — | | | — | | | — | | | — | | | — | | Retirement of treasury shares | (3,494) | | | (3) | | | (22,587) | | | 22,590 | | | — | | | — | | | — | | | — | | | — | |
| Foreign currency translation adjustment | Foreign currency translation adjustment | — | | | — | | | — | | | — | | | — | | | (30,633) | | | (30,633) | | | — | | | (30,633) | | Foreign currency translation adjustment | — | | | — | | | — | | | — | | | — | | | (30,633) | | | (30,633) | | | — | | | (30,633) | |
| December 31, 2021 | December 31, 2021 | 128,375 | | | $ | 128 | | | $ | 1,501,210 | | | $ | — | | | $ | (621,251) | | | $ | (37,706) | | | $ | 842,381 | | | $ | — | | | $ | 842,381 | | December 31, 2021 | 128,375 | | | 128 | | | 1,501,210 | | | — | | | (621,251) | | | (37,706) | | | 842,381 | | | — | | | 842,381 | |
| Shares issued, vested & expired under equity incentive plans | | Shares issued, vested & expired under equity incentive plans | 2,783 | | | 3 | | | — | | | — | | | — | | | — | | | 3 | | | — | | | 3 | |
| Shares withheld related to net-share settlement of equity awards | | Shares withheld related to net-share settlement of equity awards | (746) | | | (1) | | | (10,863) | | | — | | | — | | | — | | | (10,864) | | | — | | | (10,864) | |
| Shares issued to acquire assets and businesses | | Shares issued to acquire assets and businesses | 795 | | | 1 | | | 7,090 | | | — | | | — | | | — | | | 7,091 | | | — | | | 7,091 | |
| Stock-based compensation expense | | Stock-based compensation expense | — | | | — | | | 50,756 | | | — | | | — | | | — | | | 50,756 | | | — | | | 50,756 | |
| Net (loss) attributable to 3D Systems Corp. | | Net (loss) attributable to 3D Systems Corp. | — | | | — | | | — | | | — | | | (122,711) | | | — | | | (122,711) | | | — | | | (122,711) | |
| Pension plan adjustment | | Pension plan adjustment | — | | | — | | | — | | | — | | | — | | | 2,942 | | | 2,942 | | | — | | | 2,942 | |
| | Unrealized loss on short-term investments | | Unrealized loss on short-term investments | — | | | — | | | — | | | — | | | — | | | (328) | | | (328) | | | — | | | (328) | |
| Redeemable non-controlling interest redemption value in excess of carrying value | | Redeemable non-controlling interest redemption value in excess of carrying value | — | | | — | | | (596) | | | — | | | — | | | — | | | (596) | | | — | | | (596) | |
| Foreign currency translation adjustment | | Foreign currency translation adjustment | — | | | — | | | — | | | — | | | — | | | (18,730) | | | (18,730) | | | — | | | (18,730) | |
| December 31, 2022 | | December 31, 2022 | 131,207 | | | $ | 131 | | | $ | 1,547,597 | | | $ | — | | | $ | (743,962) | | | $ | (53,822) | | | $ | 749,944 | | | $ | — | | | $ | 749,944 | |
See accompanying notes to consolidated financial statements.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
(1) Basis of Presentation
The consolidated financial statements include the accounts of 3D Systems Corporation and all majority and wholly-owned subsidiaries and entities in which a controlling interest is maintained (“3D Systems” or the “Company” or “we” or “our” or “us”). A non-controlling interest in a subsidiary is considered an ownership interest in a majority-owned subsidiary that is not attributable to the parent. We include noncontrollingredeemable non-controlling interests in temporary equity, and non-controlling interests as a component of total equity, in the consolidated balance sheets and thesheets. The net income (loss) attributable to noncontrollingnon-controlling interests is presented as an adjustment fromto the Company's consolidated net income (loss) used to arrive at net income (loss) attributable to 3D Systems Corporation in the consolidated statements of operations and consolidated statements of comprehensive income (loss). Our annual reporting period is the calendar year.
The consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States (“GAAP”). All significant intercompany accounts and transactions have been eliminated in consolidation. Certain prior period amounts have been reclassified to conform to the current year presentation. All dollar and share amounts and other amounts presented in the accompanying footnotes are presented in thousands, except for per share information.
Our top priority is the health and safety of our employees and their families and communities, as we continue to manage our business through the COVID-19 pandemic. Throughout this past year, our leadership regularly reviewed and adapted our COVID-19 protocols based on evolving research and guidance. We have reopened our offices and begun business travel, with safety measures in place and in accordance with local guidance. Additionally, we implemented a hybrid-work program globally, providing more flexibility for employees to work remotely. We continue to monitor local transmission rates and regulatory guidance, and remain committed to protecting our employees, delivering for our customers, and supporting our communities. We are subject to vaccination and workplace safety protocols of the United States Federal Government Executive Order on Ensuring Adequate COVID Safety Protocols for Federal Contractors, and the COVID-19 Workplace Safety Guidance for Federal Contractors and Subcontractors issued by the Safer Federal Workforce Task Force. In support of a safe work environment, we have a vaccine policy for our U.S. employees, and a visitor policy to ensure those visiting our sites are taking the necessary health and safety precautions.
Our operations in North America and South America (collectively referred to as "Americas"), Europe and the Middle East (collectively referred to as "EMEA") and the Asia Pacific and Oceania regions (collectively referred to as "APAC") expose us to risks associated with public health crises and epidemics/pandemics, such as the COVID-19 pandemic. While the COVID-19 pandemic continued to impact our reported results for the years ended December 31, 2021 and 2020, we are unable to predict the longer-term impact that the pandemic may have on our business, results of operations, financial position or cash flows. The extent to which our operations may be impacted by the dynamic nature of the COVID-19 pandemic will depend largely on future developments, which are highly uncertain and cannot be accurately predicted, including the severity or resurgence of the outbreak and actions by government authorities to contain the outbreak or treat its impact. Furthermore, the impacts of uncertain global economic conditions, further supply chain disruptions, including the shortages of critical components, and the continued disruptions to, and volatility in, the financial markets remain unknown.Reportable Segments
As of January 1, 2021, we determined that the Company has 2had two reportable segments,segments: Healthcare Solutions ("Healthcare") and Industrial.Industrial Solutions ("Industrial"). The Company previously only reported its consolidated results in 1one segment. This change in segment reporting as of January 1, 2021 was the result of changes to how the chief operating decision maker (“CODM”) assesses the financial performance of the Company and in the decision-making process driving future operating performance. As a result of this re-segmentation, the Companywe performed a quantitative analysis to test for potential impairment of our goodwill immediately following the re-segmentation, notingand we concluded that we determinedthe fair values of both our Healthcare Solutions and Industrial Solutions reportable segments, which also comprised our reporting units for purposes of the goodwill impairment test, exceeded their respective carrying values.
At the time of our re-segmentation, the fair value of the Healthcare and Industrialeach of our reporting segments exceeded their carrying values. See Note 6.
Fair valueunits was determined using a combination of an (1) income approach, which estimates fair value based upon projections of future revenues, expenses, and cash flows discounted to itstheir present value, and (2) a market approach. The valuation methodologymethodologies and underlying financial information included in the Company's determination of fair value required significant judgments by management. The principal assumptions used in the Company's discounted cash flow analysis consisted of (a) the long-term projections of future financial performance and (b) the weighted-average cost of capital of market participants, adjusted for the risk attributable to the Company and the industry in which it operates. Under the market approach, the principal assumptionassumptions included an estimateestimates of multiples of various financial metrics of comparable companies.
All dollar and share amounts presented inSee Note 6 for details regarding the accompanying footnotes are presented in thousands, except for per share information.operating results of our reportable segments.
During the first quarter ended March 31, 2021 we became aware that certain amounts previously presented within our statements of operations as products cost of sales related to services cost of sales. We note that the total cost of sales line item was not affected. We further note that this error did not affect our gross profit, loss from operations, net income (loss), consolidated balance sheets or statements of cash flows. We evaluated the materiality of this presentation-only error and concluded it was not material to any previously reported quarter or year-end financial statement. The following schedule depicts the effect on our previously reported statements of operations.
| | | | | | | | | | | | | | | | | |
| Year Ended December 31, 2020 |
| (in thousands) | As reported | | Change | | Revised |
| Cost of sales: | | | | | |
| Products | $ | 227,681 | | | $ | (7,266) | | | $ | 220,415 | |
| Services | 106,184 | | | 7,266 | | | 113,450 | |
| Total cost of sales | $ | 333,865 | | | $ | — | | | $ | 333,865 | |
Revision of Previously Issued Financial Statements
During the fourth quarter ended December 31, 2021, we became aware that certain amounts previously presented as investing cash outflows should be reported as financing cash outflows within the statements of cash flows. The error affected the previously issued statements of cash flows for the three, six and nine month periods within the December 31, 2021 and 2020 annual periods as well as the annual periods ended December 31, 2020 and 2019. We note that this change did not impact the as reported net increase (decrease) in cash, cash equivalents and restricted cash within the annual 2020 and 2019 statements of cash flows or the interim statements of cash flows for the years ended December 31, 2021 and 2020. We further note that this reclassification did not affect our balance sheet, statements of operations, statements of comprehensive income (loss) and statements of stockholders' equity. We evaluated the materiality, including both quantitative and qualitative considerations, of this presentation-only error and concluded it was not material to any previously reported quarter or year-end financial statement. The following schedule depicts the effect on our previously reported interim and annual statements of cash flows.
| | | | | | | | | | | | | | | | | | | | | | | | | | |
| | Year Ended December 31, 2020 | | Year Ended December 31, 2019 |
| | As Reported | Changed | Revised | | As Reported | Changed | Revised |
| | | | | | | | |
| Net cash provided by (used in) operating activities | | $ | (20,121) | | $ | — | | $ | (20,121) | | | $ | 31,581 | | $ | — | | $ | 31,581 | |
| | | | | | | | |
| Net cash provided by (used in) investing activities | | (24,233) | | 12,500 | | (11,733) | | | (26,872) | | 2,500 | | (24,372) | |
| | | | | | | | |
| Net cash provided by (used in) financing activities | | (6,980) | | (12,500) | | (19,480) | | | 18,700 | | (2,500) | | 16,200 | |
| | | | | | | | |
| Effect of exchange rate changes on cash, cash equivalents and restricted cash | | 1,428 | | — | | 1,428 | | | 289 | | — | | 289 | |
| | | | | | | | |
| Net increase (decrease) in cash, cash equivalents and restricted cash | | $ | (49,906) | | $ | — | | $ | (49,906) | | | $ | 23,698 | | $ | — | | $ | 23,698 | |
| | | | | | | | | | | | | | | | | | | | | | | | | | |
| | Nine Months Ended September 30, 2021 | | Nine Months Ended September 30, 2020 |
| | As Reported | Changed | Revised | | As Reported | Changed | Revised |
| | | | | | | | |
| Net cash provided by (used in) operating activities | | $ | 62,652 | | $ | — | | $ | 62,652 | | | $ | (32,649) | | $ | — | | $ | (32,649) | |
| | | | | | | | |
| Net cash (used in) investing activities | | 395,641 | | 4,000 | | 399,641 | | | (22,459) | | 12,500 | | (9,959) | |
| | | | | | | | |
| Net cash provided by (used in) financing activities | | (32,202) | | (4,000) | | (36,202) | | | (3,773) | | (12,500) | | (16,273) | |
| | | | | | | | |
| Effect of exchange rate changes on cash, cash equivalents and restricted cash | | (7,737) | | — | | (7,737) | | | 526 | | — | | 526 | |
| | | | | | | | |
| Net increase (decrease) in cash, cash equivalents and restricted cash | | $ | 418,354 | | $ | — | | $ | 418,354 | | | $ | (58,355) | | $ | — | | $ | (58,355) | |
| | | | | | | | | | | | | | | | | | | | | | | | | | |
| | Six Months Ended June 30, 2021 | | Six Months Ended June 30, 2020 |
| | As Reported | Changed | Revised | | As Reported | Changed | Revised |
| | | | | | | | |
| Net cash provided by (used in) operating activities | | $ | 41,976 | | $ | — | | $ | 41,976 | | | $ | (21,018) | | $ | — | | $ | (21,018) | |
| | | | | | | | |
| Net cash (used in) investing activities | | 31,325 | | 4,000 | | 35,325 | | | (19,584) | | 12,500 | | (7,084) | |
| | | | | | | | |
| Net cash provided by (used in) financing activities | | (28,444) | | (4,000) | | (32,444) | | | (27,270) | | (12,500) | | (39,770) | |
| | | | | | | | |
| Effect of exchange rate changes on cash, cash equivalents and restricted cash | | 2,902 | | — | | 2,902 | | | (1,856) | | — | | (1,856) | |
| | | | | | | | |
| Net increase (decrease) in cash, cash equivalents and restricted cash | | $ | 47,759 | | $ | — | | $ | 47,759 | | | $ | (69,728) | | $ | — | | $ | (69,728) | |
| | | | | | | | | | | | | | | | | | | | | | | | | | |
| | Three Months Ended March 31, 2021 | | Three Months Ended March 31, 2020 |
| | As Reported | Changed | Revised | | As Reported | Changed | Revised |
| | | | | | | | |
| Net cash provided by (used in) operating activities | | $ | 28,453 | | $ | — | | $ | 28,453 | | | $ | (2,285) | | $ | — | | $ | (2,285) | |
| | | | | | | | |
| Net cash (used in) investing activities | | 46,563 | | 4,000 | | 50,563 | | | (16,598) | | 12,500 | | (4,098) | |
| | | | | | | | |
| Net cash provided by (used in) financing activities | | (24,337) | | (4,000) | | (28,337) | | | 1,229 | | (12,500) | | (11,271) | |
| | | | | | | | |
| Effect of exchange rate changes on cash, cash equivalents and restricted cash | | (2,434) | | — | | (2,434) | | | (3,241) | | — | | (3,241) | |
| | | | | | | | |
| Net increase (decrease) in cash, cash equivalents and restricted cash | | $ | 48,245 | | $ | — | | $ | 48,245 | | | $ | (20,895) | | $ | — | | $ | (20,895) | |
(2) Significant Accounting Policies
Use of Estimates
The preparation of financial statements in conformity with GAAP requires us to make estimates and assumptions that affect (1) the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the dateas of the financial statements,balance sheet date and (2) the reported amounts of revenues and expenses during the reporting period. We base our estimates on historical experience, currently available information and various other assumptions that we believe are reasonable under the circumstances. Actual results could differ from these estimates.
Revenue Recognition
We account for revenue in accordance with Accounting Standard Codification ("ASC") Topic 606, “Revenue from Contracts with Customers.” Collaborative revenue contracts, infor which the collaboration partner meets the definition of a customer, are recorded in accordance with ASC Topic 606,606; otherwise, the collaborative arrangements are recorded in accordance with ASC 808, - "Collaborative Arrangements". See Note 5 for further discussion.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Cash and Cash Equivalents
Cash and cash equivalents consist of cash and highly liquid investments with maturities of three months or less when acquired. At times, cash and cash equivalents balances may be in excess of FDIC insurance limits.
Short-Term Investments
F-14A portion of the company's excess cash is invested in short-term investments. The company's short-term investment accounting policy is that securities with maturities greater than 90 days at the time of purchase that are available for operations in the next 12 months are classified as short-term investments. The Company’s short-term investments primarily consist of investment grade bonds, certificates of deposit, commercial paper, and short maturity bond funds, all with a remaining maturity of generally less than twelve months at the date of purchase and classified as available-for-sale. Interest and dividends on these investments are recorded into income when earned.
We assess declinesAvailable-for-sale securities, which consist of debt securities, are carried at fair value, with unrealized gains and losses, net of related tax, reported in accumulated other comprehensive (loss) income. Adjustments to the fair value of investments to determine whether such declinesclassified as available-for-sale are other-than-temporary. Other-than-temporary impairments of investments arerecorded as an increase or decrease in accumulated other comprehensive (loss) income in shareholders’ equity, unless the adjustment is considered an other-than-temporary impairment, in which case the adjustment is recorded to interest and other expense,income (expense), net, in the period in which they become impaired.
For The Company periodically evaluates its investments for impairment. There were no other-than-temporary impairments of investments recognized in any of the fiscal years ended December 31, 2021 and 2020, we recorded impairment charges of $0 and $2,361, respectively, related to certain cost-method investments. The aggregate carrying amount of all investments accounted for under the cost method totaled $5,632 and $5,016 at December 31, 2021 and 2020, respectively, and is included in other assets, on our consolidated balance sheets.presented.
Accounts Receivable and Allowance for Doubtful Accounts
Trade accounts receivable are recorded at the invoiced amount and do not bear interest. In evaluating the collectability of accounts receivable, we assess a number of factors, including specific customers’ ability to meet their financial obligations to us, the length of time receivables are past due, and historical collection experience.experience, current economic conditions, and reasonable and supportable forecasts. Based on these assessments, we may record a reserve for specific customers, as well as a general reserve and allowance for returns and discounts. If circumstances related to specific customers change, or economic conditions deteriorate such that our past collection experience is no longer relevant, our estimate of the recoverability of accounts receivable could be further reduced from the levels provided for in the consolidated financial statements. One customer represents a significant concentration of credit risk, as they represent greater than 10% of our total accounts receivable.
The following presents the changes in the balance of our allowance for doubtful accounts:
| | Year Ended | | Item | | Balance at beginning of year | | Additions charged to expense | | Other (a) | | Balance at end of year | |
| Year | | Year | | Item | | Balance at beginning of year | | Additions charged to expense | | Other (a) | | Balance at end of year |
| 2022 | | 2022 | | Allowance for doubtful accounts | | $ | 2,445 | | | $ | 562 | | | $ | 107 | | | $ | 3,114 | |
| 2021 | 2021 | | Allowance for doubtful accounts | | $ | 4,392 | | | $ | 232 | | | $ | (2,179) | | | $ | 2,445 | | 2021 | | Allowance for doubtful accounts | | 4,392 | | | 232 | | | (2,179) | | | 2,445 | |
| 2020 | 2020 | | Allowance for doubtful accounts | | 8,762 | | | 457 | | | (4,827) | | | 4,392 | | 2020 | | Allowance for doubtful accounts | | 8,762 | | | 457 | | | (4,827) | | | 4,392 | |
| 2019 | | Allowance for doubtful accounts | | 8,423 | | | 1,308 | | | (969) | | | 8,762 | | |
(a)Other includes the impact of subsequent collections or write-offs, to the allowance for doubtful accounts.recoveries, divestitures and foreign currency translation adjustments.
Inventories
Inventories are stated at the lower of cost or net realizable value, with cost beingreflecting standard cost, which approximates the first-in, first-out method. Capitalized inventory costs include materials, labor, and manufacturing overhead that relate to the acquisition of raw materials and production into finished goods. The Company regularly reviews inventory for excess and obsolescence and records a provision to write down inventory to its net realizable value when carrying value is in excess of such value.
Property and Equipment
Property and equipment are recorded at cost and are depreciated over their estimated useful lives using the straight-line method. Upon retirement or sale, the cost of assets disposed of and the related accumulated depreciation are removed from the accounts and any resulting gain or loss is included in the determination of net income or loss. Repairs and maintenance costs are expensed as incurred.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Long-Lived Assets and Goodwill
Long-Lived Assets
We review long-lived assets including intangible assets subject to amortization, for impairment whenever events or changes in circumstances indicate that the carrying value of the asset may not be recoverable. Recoverability is assessed for the carrying value of assets held for use based on a review of undiscounted projected cash flows. Impairment losses, where identified, are measured as the excess of the carrying value of the long-lived asset over its estimated fair value as determined by discounted projected cash flows. No impairment charges were recorded for intangibletangible assets with finite lives were recorded for the years ended December 31, 2022, 2021, and 2020.
Intangible Assets (Excluding Goodwill)
Intangible assets include patents, trade names, customer relationships, purchased technology, and in-process research and development (IPR&D). Intangible assets with a finite life are amortized on a straight-line basis with estimated useful lives typically ranging from 2 to 20 years and are assessed for impairment whenever events or changes in circumstances indicate that the carrying value of the asset may not be recoverable, consistent with the Company's accounting policy for other long-lived assets with a finite life. Amortization is recognized within selling, general and administrative expenses in the consolidated statements of operations.
Acquired IPR&D represents the fair value assigned to those research and development projects that were acquired in a business combination for which the related products have not received regulatory approval or commercial viability and have no alternative future use. IPR&D is capitalized at its fair value as an indefinite-lived intangible asset, and any development costs incurred after the acquisition are expensed as incurred. The fair value of IPR&D is determined by estimating the future cash flows of each project and discounting the net cash flows back to their present values. Upon achieving regulatory approval or commercial viability for the related product, the indefinite-lived intangible asset is accounted for as a finite-lived asset and is amortized on a straight-line basis over the estimated useful life. If the project is not completed or is terminated or abandoned, the Company may have an impairment related to the IPR&D, which is charged to expense. Indefinite-lived intangible assets are tested for impairment annually in the fourth quarter of the fiscal year and whenever events or changes in circumstances indicate that the carrying amount may be impaired. Impairment is calculated as the excess of the asset’s carrying value over its fair value. Fair value is generally determined using a discounted future cash flow analysis. IPR&D with no alternative future use acquired outside of a business combination is expensed immediately.
Goodwill
Goodwill is the excess of the cost of an acquired entity over the amounts assigned to the assets acquired and liabilities assumed in a business combination. Goodwill is not amortized. Goodwill is tested for impairment annually on November 30 of each year, and is tested for impairment between annual tests if an event occurs or circumstances change that would indicate the carrying amount may be impaired. Impairment testing for goodwill is done at a reporting unit level, with all goodwill assigned to a reporting unit.
Our reporting units are Healthcare and Industrial. We completed
The test for impairment of goodwill requires the required annual goodwill impairment test as of November 30, 2021. The goodwill impairment test comparedCompany to make several estimates related to projected future cash flows to determine the fair value of the goodwill reporting units. The Company calculates the excess of each reporting unitunit's fair value over its carrying amount, including goodwill, utilizing a discounted cash flow analysis and other valuation techniques, as deemed appropriate. Internal operational budgets and long-range strategic plans are used as a basis for the cash flow analysis. The Company also utilizes assumptions for working capital, capital expenditures, and terminal growth rates. The discount rate applied to theirthe cash flow analysis is based on the weighted average cost of capital (“WACC”) for each reporting unit. An impairment is recognized when the carrying value. Weamount of the reporting unit’s net assets exceeds the estimated the fair value of ourthe reporting units based primarily on the discounted projected cash flows of the underlying operations and a market approach. The estimated fair value for each of our reporting units was in excess of their respective carrying values as of November 30, 2021.unit.
For a summary of our goodwill by reporting unit and discussion of goodwill impairment, see Note 11.
Assets and Liabilities Held for SaleNon-Current Investments
Once management has committedWe recognize investments in equity securities without a readily determinable fair value at cost minus impairment. We assess these investments for potential impairment if an event occurs or circumstances change that would indicate the carrying amount may be impaired. We assess declines in the fair value of investments in debt securities to disposaldetermine whether such declines are other-than-temporary. Impairments of a componentnon-current investments are recorded to interest and other income (expense), net in the consolidated statements of operations in the Companyperiod in which they become impaired.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
For the years ended December 31, 2022, 2021, and it2020, we recorded impairment charges of $2,900, $0 and $2,361, respectively, related to non-current investments. The aggregate carrying amount of all non-current investments totaled $13,668 and $5,632 at December 31, 2022 and 2021, respectively, and is probable of being completed within one year, theincluded in other assets and liabilities are reclassified as held for sale and net income continues to be reported as from continuing operations, unless it meets requirements to be reclassified as a discontinued operation. See Note 4.on our consolidated balance sheets.
Contingencies
We follow the provisions of ASC 450, “Contingencies,” which requires that an estimated loss from a loss contingency be accrued by a charge to income if (1) it is both probable that an asset has been impaired or that a liability has been incurred and that(2) the amount of the loss can be reasonably estimated. Legal costs related to the defense or settlement of a loss contingency are expensed when such costs are incurred and, accordingly, future legal costs expected to be incurred are not accrued as part of the liability recorded when a loss contingency has been deemed probable and estimable.
Redeemable Non-controlling Interest
In connection with the acquisition of 93.75% of Kumovis on April 1, 2022, as discussed in Note 3, the Company recorded a redeemable non-controlling interest (RNCI). The RNCI represents non-controlling shareholders’ interest in Kumovis, which is controlled by, but not wholly owned by, 3D Systems, and for which 3D Systems' obligation to redeem the minority shareholders’ interest is governed by a put/call relationship. Subsequent to the initial fair value measurement, the RNCI is recorded at the greater of its redemption value or its carrying value at the end of each reporting period. If the RNCI is carried at its redemption value, the difference between the redemption value and the carrying value is adjusted at the end of each reporting period through additional paid-in capital, and the excess redemption value is recognized as a reduction to the net income, or increase to the net loss, attributable to 3D Systems’ shareholders for purposes of reporting earnings or loss per share. See Note 20.
Foreign Currency Translation and Transactions
The local currency in which a subsidiary operates is generally considered its functional currency for those subsidiaries domiciled outside the United States. Assets and liabilities for non-U.S.States ("foreign subsidiaries"). The functional currency financial statements of foreign subsidiaries are translated to U.S. dollars ("USD") in connection with the preparation of the Company's consolidated financial statements. Assets and liabilities of foreign subsidiaries are translated to USD at month-end exchange rates of the period reported. Income and expense items are translated monthly using the monthly average exchange rate. CumulativeThe effects of translating a foreign subsidiary's financial statements are recorded as cumulative translation adjustments are recordedand reported as a component of accumulated other comprehensive income (loss) in shareholders’ equity.
ForForeign currency transactions are those transactions whose terms are denominated in a currency other than an entity's functional currency. Foreign currency transactions that remain unsettled as of the Year Ended December 31, 2021, 2020, 2019end of a reporting period must be remeasured into the aggregateentity's functional currency, resulting in the recognition of a gain or loss when a change in exchange rate has occurred subsequent to the date on which the transaction was originally recognized or was most recently remeasured. The Company recognizes foreign currency gain or (loss) was 1,681, (4,762), (2,287), respectively,transaction gains and has been recorded as a component oflosses within interest and other income (expense), net in the accompanyingits consolidated statements of operations. See Note 16.
Derivative Financial Instruments
We are exposed to market risk from changes in interest rates, foreign currency exchange rates and commodity prices, which may adversely affect our results of operations and financial condition. We seek to minimize these risks through regular operating and financing activities and, when we consider it to be appropriate, through the use of derivative financial instruments. We do not purchase, hold or sell derivative financial instruments for trading or speculative purposes.
We may use derivative financial instruments to manage our exposure to changes in interest rates on outstanding debt instruments. For those instruments that qualify and where we elect to prepare and maintain the documentation to qualify for cash flow hedge accounting treatment under ASC 815, “Derivatives and Hedging,” related gains and losses (realized or unrealized) related to derivative instruments are recognized in accumulated other comprehensive income (loss) and are reclassified into earnings when the underlying transaction is recognized in net earnings and, dependingearnings. Depending on the fair value at the end of the reporting period, derivatives are recorded either in prepaid and other current assets or in accrued and other liabilities in the consolidated balance sheets.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
We and our subsidiaries conduct business in various countries using both their functional currencies and other currencies to effect cross bordercross-border transactions. As a result, we and our subsidiaries are subject to the risk that fluctuations in foreign currency exchange rates between the dates that thosenon-functional currency transactions are entered into and their respective settlement dates will result in a foreign currency exchange gain or loss. When practicable, we endeavor to match assets and liabilities in the same currency on our U.S. balance sheet and those of our subsidiaries in order to reduce these risks. If appropriate, we enter into foreign currency exchange contracts to hedge the exposure arising from thoseforeign currency transactions. See Note 15.
For our hedges of foreign currency exchange rates and commodity prices, we have elected to not prepare and maintain the documentation to qualify for hedge accounting treatment under ASC 815, “Derivatives and HedgingHedging.,” and therefore,Accordingly, changes in fair value are recognized in interest and other expense,income (expense), net in the consolidated statements of operations and comprehensive loss and, depending on the fair value at the end of the reporting period, derivatives are recorded either in prepaid expenses and other current assets or in accrued and other liabilities in the consolidated balance sheets.
We are exposed to credit risk if the counterparties to suchour derivative transactions are unable to perform their obligations. However, we seek to minimize such risk by entering into transactions with counterparties that are believed to be creditworthy financial institutions.
Research and Development Costs
Research and development costs, consisting primarily of employee compensation, operating supplies, facility costs and depreciation, are expensed as incurred. When the Company is reimbursed by a collaboration partner for work the Company performs, it records the costs incurred as research and development expense and the related reimbursement as a reduction to research and development expense in its consolidated statements of operations.
Earnings (Loss) perPer Share
Basic earnings (loss) per share areis calculated using the weighted-average number of common shares outstanding during each period. Diluted earnings per share areis calculated usingbased upon the inclusion of additional dilutive and potentially dilutive shares, which include shares issuable upon exercise of outstanding stock options, upon vesting of employee restricted stock-based awards, upon the accrual of incentive compensation to be paid in shares (if any performance-based conditions have been satisfied as of the end of the reporting period), and to settle the portion of the convertible notes that may be settled in shares where(where the conversion of such instruments would be dilutive.dilutive). See Note 19.
Advertising Costs
Advertising costs are expensed as incurred and recorded in Selling General & Administrativeselling, general and administrative expenses. Advertising costs, including trade shows, were $7,255, $5,486 $7,561 and $13,732$7,561 for the years ended December 31, 2022, 2021 2020 and 2019,2020, respectively.
Pension costsCosts
We sponsor a retirement benefit for one of our non-U.S. subsidiaries in the form of a defined benefit pension plan. Accounting standards require the cost of providing this pension benefit be measured on an actuarial basis. Actuarial gains and losses resulting from both normal year-to-year changes in valuation assumptions and differences from actual experience are deferred and amortized. The application of these accounting standards require us to make assumptions and judgements that can significantly affect these measurements. Our critical assumptions in performing these actuarial valuations include the selection of the discount rate to determine the present value of the pension obligations that affects the amount of pension expense recorded in any given period. Changes in the discount rate could have a material effect on our reported pension obligations and related pension expense. See Note 12.
Equity Compensation Plans
We recognize compensation expense for our stock-based compensation programs, which include stock options, restricted stock, restricted stock units (“RSU”), performance shares and market basedmarket-based awards. The fair value for service-based awards is estimated at the grant date and recognized as expense ratably over the requisite service period of the award.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
The fair value of performance-based awards are recognizedis estimated on the grant date and expensed ratably over anyan implicit or explicit service period when the performance condition is deemed probable of achievement. Performance-based awards that cliff vest are expensed ratably using the straight-line method; whereas, performance-based awards with graded vesting features are expensed using the graded vesting method. Stock compensation expense recorded for performance sharesperformance-based awards is reversed if the performance condition is no longer deemed probable of achievement. The fair value for awards with market conditions is determined using a Monte Carlo valuation model and is expensed ratably over any implicit or explicit service period regardless if the market condition is probable of achievement or not. Stock compensation expense is not reversed if the market conditionultimately is not met. We recognize forfeitures when they occur.
Some RSUs are granted with a performance measure derived from non-GAAP-based management targets or non-financial targets. Depending on our performance with respect to these metrics, the number of RSUs earned may be less than, equal to or greater than the original number of RSUs awarded, subject to a payout range.
The fair value of awards with market conditions ("market-based awards") is determined using a Monte Carlo valuation model and is expensed over an implicit or explicit service period regardless of whether the market condition is probable of achievement or not. Market-based awards that cliff vest are expensed ratably using the straight-line method; whereas, market-based awards with graded vesting features are expensed using the graded vesting method. Stock compensation expense is not reversed if the market condition is not met.
For all share-based payment awards, we recognize forfeitures when they occur.
Income Taxes
We and the majority of our domestic subsidiaries file a consolidated U.S. federal income tax return, while fourthree of our domestic entities file separate U.S. federal income tax returns. Our non-U.S. subsidiaries file income tax returns in their respective jurisdictions.
Income taxes are accounted for under the asset and liability method. Deferred income tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and for tax benefit carryforwards. Deferred income tax liabilities and assets at the end of each period are determined using enacted tax rates.
We establish a valuation allowance for those jurisdictions in which the expiration date of tax benefit carryforwards or projected taxable earnings leads us to conclude that it is “more likely than not” that a deferred tax asset will not be realized. The evaluation process includes the consideration of all available evidence regarding historical results and future projections, including the estimated timing of reversals of existing taxable temporary differences and potential tax planning strategies. Once a valuation allowance is established, it is maintained until a change in factual circumstances gives rise to sufficient income of the appropriate character and timing that will allow a partial or full utilization of the deferred tax asset.
In accordance with ASC 740, “Income Taxes,” the impact of an uncertain tax position on our income tax returns is recognized at the largest amount that is more likely than not to be required to be recognized upon audit by the relevant taxing authority.
We include interest and penalties accrued in the consolidated financial statements as a component of income tax expense. These amounts were immaterial for 2022, 2021 2020 and 2019.2020.
See Note 22 for further discussion.
Operating and Finance Leases
We determine if an arrangement contains a lease at inception. We record both operating leases and finance leases on our balance sheet and do not separate non-lease components from our real estate leases. We exclude leases with a term of one year of less from our balance sheet.
Some leases include the options to purchase the leased asset, terminate the lease or extend the lease for one or more years; theseyears. These options are includedconsidered in the rightdetermination of use ("ROU") asset and liabilitythe estimated lease term when it is reasonably certain an option will be exercised. Our leases do not contain any material residual value guarantees or material restrictive covenants.
Most of our leases do not provide an implicit rate, therefore we use our incremental borrowing rate based on the information available at the commencement date to determine the present value of the future lease payments.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Certain of our leases include variable costs. Variable costs include non-lease components that wereare incurred based upon actual terms, rather than contractually fixed amounts. In addition, variable costs are incurred for lease payments that are indexed to a change in rate or index. Because the ROU assetright-of-use ("ROU") assets recorded on the balance sheet wasare determined based upon factors considered at the commencement date, subsequent changes in the rate or index that were not contemplated in the ROU asset balances recorded on the balance sheetat commencement result in variable expenses being recorded when these expenses are incurred during the lease term. See Note 7.
Recent Accounting Pronouncements
Recently Adopted Accounting Standards
In October 2020,2021, the FASBFinancial Accounting Standard Board ("FASB") issued ASUAccounting Standard Update ("ASU") 2021-08, "Business Combinations (Topic 805) - Accounting for Contract Assets and Contract Liabilities from Contracts with Customers", which amends ASC 805 to add contract assets and contract liabilities to the list of exceptions to the recognition and measurement principles that apply to business combinations and to “require that an entity (acquirer) recognize and measure contract assets and contract liabilities acquired in a business combination in accordance with TopicASC 606.” While primarily related to contract assets and contract liabilities that were accounted for by the acquiree in accordance with ASC 606, “the amendments also apply to contract assets and contract liabilities from other contracts to which the provisions of TopicASC 606 apply, such as contract liabilities from the sale of nonfinancial assets within the scope of Subtopic 610-20.” For public business entities, the amendments in this UpdateASU are effective for fiscal years beginning after December 15, 2022, including interim periods within those fiscal years. Early adoption of the amendments is permitted. The Company expects to early adoptadopted this standard in the first quarter of 2022, and doesit did not expect it to be material tohave an impact on its results of operations, cash flows or financial position.
In August 2020, the FASB issued ASU 2020-06, "Debt - Debt with Conversion and Other Options (Subtopic 470-20)," and "Derivatives and Hedging - Contracts in Entity’s Own Equity (Subtopic 815-40)," which simplifies the accounting for convertible instruments by reducing the number of accounting models available for convertible instruments. This guidance also eliminates the treasury stock method to calculate diluted earnings per share for convertible instruments and requires the use of the if-converted method. For public companies, this guidance is effective for fiscal years beginning after December 15, 2021 and interim periods within those fiscal years. Early adoption is permitted. The Company early adopted the standard as of January 1, 2021 and applied this guidance to the convertible senior notes issued in November 2021. See Note 14.
In December 2019, the Financial Accounting Standards Board (“FASB”)FASB issued Accounting Standards Update (“ASU”)ASU 2019-12, “Income Taxes (Topic 740) - Simplifying the Accounting for Income Taxes,” which simplifies the accounting for income taxes by eliminating some exceptions to the general approach in Accounting Standards CodificationASC 740, "Income Taxes.Taxes." It also clarifies certain aspects of the existing guidance to promote more consistent application. This standard is effective for calendar-year public business entities in 2021 and interim periods within that year, and early adoption is permitted. The Company adopted this guidance during the first quarter of 2021. The implementation did not have a material effect on our financial position, results of operations or cash flows.
In June 2016,November 2018, the FASB issued ASU 2016-13, “2018-18, "Measurement of Credit Losses on Financial InstrumentsCollaborative Arrangements (ASC 808), Clarifying the Interaction between ASC 808 and ASC 606”" (“ASU 2016-13”2018-18”), as revised. This ASU clarified when transactions between collaborative participants are in July 2018, whichthe scope of ASC 606. The ASU also provides some guidance regardingon presentation of transactions not in the measurementscope of credit lossesASC 606. After adoption during the fourth quarter of 2020, the Company determined it was appropriate to recast the presentation of our previously reported statement of operations for financial assets and certain other
instruments that are not accounted for at fair value through net income, including trade and other receivables, debt securities, net investment in sales type and direct financing leases, and off-balance sheet credit exposures. The new guidance requires companies to replace the current incurred loss impairment methodology with a methodology that measures all expected credit losses for financial assets based on historical experience, current conditions, and reasonable and supportable forecasts.year ended December 31, 2019. The Company acknowledges this standard should have been adopted this guidance during the first quarteras of January 1, 2020. The implementationadoption of this standard did not have a materialchange the Company's previously reported net loss or loss from operations for the year ended December 31, 2019 or any individual quarter therein, and the effect on our financial position, results of operations or cash flows.the individual quarters in 2020 was immaterial.
In January 2017, the FASB issued ASU No. 2017-04, “Intangibles - Goodwill and Other (Topic 350), Simplifying the Test for Goodwill Impairment” (“ASU 2017-04”), which eliminates the performance of Step 2 from the goodwill impairment test. In performing its annual or interim impairment testing, an entity will instead compare the fair value of the reporting unit with its carrying amount and recognize any impairment charge for the amount by which the carrying amount exceeds the reporting unit’s fair value. Additionally, an entity should consider income tax effects from any tax-deductible goodwill on the carrying amount of the reporting unit when measuring the goodwill impairment loss. The Company adopted this guidance during the first quarter of 2020. The implementation did not have a material effect on our financial position, results of operations or cash flows.
In November 2018,June 2016, the FASB issued ASU 2018-18, "2016-13, “Collaborative Arrangements (ASC 808), Clarifying the Interaction between ASC 808 and ASC 606Measurement of Credit Losses on Financial Instruments"” (“ASU 2018-18”2016-13”). This ASU clarified when transactions between collaborative participants, as revised in July 2018, which provides guidance regarding the measurement of credit losses for financial assets and certain other instruments that are not accounted for at fair value through net income, including trade and other receivables, debt securities,
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
net investment in sales type and direct financing leases, and off-balance sheet credit exposures. The new guidance requires companies to replace the scope of ASC 606.current incurred loss impairment methodology with a methodology that measures all expected credit losses for financial assets based on historical experience, current conditions, and reasonable and supportable forecasts. The ASU also provides someCompany adopted this guidance on presentation of transactions not in the scope of ASC 606. After adoption during the fourthfirst quarter of 2020 the Company determined it was appropriate to recast the presentation of2020. The implementation did not have a material effect on our previously reported statementfinancial position, results of operations for the years ended December 31, 2019. The Company acknowledges this standard should have been adopted January 1, 2020. The adoption of this standard did not change the Company's previously reported net loss or loss from operations for the years ended December 31, 2019 or any individual quarter therein and the effect on the individual quarters in 2020 was immaterial.cash flows.
No other new accounting pronouncements, issued or effective during 2021,2022, have had or are expected to have a significant impact on our consolidated financial statements.
(3) Acquisitions/Investments
dp polar
On October 4, 2022, we completed the acquisition of 100% of dp polar GmbH ("dp polar"), a German-based designer and manufacturer of the industry’s first additive manufacturing system designed for true high-speed mass production of customized components, for $26,695 (excluding customary post-closing adjustments), of which $19,604 was paid in cash, and the remaining $7,091 was paid via the issuance of the Company’s common stock. An additional payment of $2,229, to be settled via the issuance of 249,865 shares of the Company’s common stock, is possible upon the continued employment of a certain key individual from dp polar through October 4, 2024. Upon assessment, management concluded that this potential obligation for the payment of an additional 249,865 in shares of common stock should be accounted for as compensation expense recognized over the required service period of the individual to whom the amount will potentially be paid and, accordingly, the related $2,229 has been excluded from purchase consideration attributable to the acquisition.
The Company acquired dp polar for access to dp polar's patented continuous printing process. This business and its technology are expected to contribute to the operations of the Company's Healthcare Solutions and Industrial Solutions segments. Central to dp polar’s patented continuous printing process is a large-scale, segmented, rotating print platform that eliminates the start/stop operations of virtually all additive manufacturing platforms. With dp polar’s technology and patented polar coordinate control, the print heads remain stationary above the rotating platform, providing a continuous print process. The revenue generated from the acquisition date through December 31, 2022 was immaterial and the acquisition’s near-term impact on the Company’s results of operations and cash flows is expected to be dilutive. In addition, the Company incurred $165 of acquisition-related expenses that are reported in selling, general and administrative expenses in the consolidated statements of operations.
We accounted for the acquisition of dp polar using the acquisition method, as prescribed by ASC 805, "Business Combinations" (“ASC 805”). In accordance with valuation methodologies described in ASC 820, "Fair Value Measurement" (“ASC 820”), the acquired assets and assumed liabilities were recorded at their estimated fair values as of the date of the dp polar acquisition.
Shown below is the preliminary purchase price allocation, which summarizes the fair values of the assets acquired and liabilities assumed at the date of acquisition:
| | | | | | | | | | | | | | |
| (in thousands) | | | | |
| Current assets, including cash acquired of $243 | | | | $ | 302 | |
| Intangible assets: | | | | |
| In-process research and development | | $ | 5,014 | | | |
| Trade name | | 3,930 | | | |
| Total intangible assets | | | | 8,944 | |
| Goodwill | | | | 15,350 | |
| Other assets | | | | 2,376 | |
| Liabilities: | | | | |
| Accounts payable and accrued liabilities | | $ | 277 | | | |
| Total liabilities | | | | 277 | |
| Net assets acquired | | | | $ | 26,695 | |
The goodwill recognized is attributable to synergies which are expected to enhance and expand the Company’s overall product portfolio and opportunities in new and existing markets, future products that have yet to be determined and dp polar’s
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
assembled workforce. This goodwill is not expected to be deductible for tax purposes.
As of December 31, 2022, the purchase price allocation for dp polar is preliminary. The Company continues to review the final closing balance sheet of dp polar and may further adjust the acquisition-date fair values of acquired assets and assumed liabilities based on this review. The Company also continues to review dp polar’s pre-acquisition tax returns to determine the final tax positions, including net operating losses and any required valuation allowance. The final purchase price allocations will be completed when the Company has finished its valuation activities and the review of dp polar’s closing balance sheet and the pre-acquisition tax returns. These final allocations could differ materially from the current preliminary allocations. The final allocations may include (1) changes in the preliminary allocations to acquired intangible assets and goodwill and (2) changes in the preliminary allocations to other assets and liabilities, including but not limited to tax assets and liabilities, inclusive of deferred taxes. The estimated useful lives of acquired intangible assets are also preliminary.
Kumovis
On April 1, 2022, we completed the acquisition of 93.75% of Kumovis GmbH ("Kumovis") for an all-cash purchase price of $37,726, plus an estimated RNCI of $1,559. $3,628 of the cash payment is deferred for up to fifteen months from the closing date. Kumovis, which is part of the Healthcare Solutions segment and reporting unit, utilizes polyether ether keton or “PEEK” materials, which has properties that lend it to many medical applications that fit into our personalized healthcare solutions operations, including many implant applications. The revenue generated from the acquisition date through December 31, 2022 was immaterial and the acquisition’s near-term impact on the Company’s results of operations and cash flows is expected to be dilutive. In addition, the Company incurred $126 of acquisition-related expenses that are reported in selling, general and administrative expenses in the consolidated statements of operations.
In conjunction with the Kumovis acquisition, the Company and the non-controlling shareholders entered into a put/call option agreement, whereby, at a later date, the Company has the option to purchase from the non-controlling shareholders, and the non-controlling shareholders have the option to sell to the Company, the remaining 6.25% ownership interest in Kumovis for an exercise price calculated based on the achievement of pre-determined revenue and gross profit targets. Fifty percent of the Kumovis common shares related to the put/call can be exercised upon the achievement of an initial revenue and gross profit target, while the remaining 50% can be exercised upon the achievement of a second revenue and gross profit target. If one or both sets of targets have not been met within 5.75 years from the acquisition date, there is a floor strike price that must be exercised. Up to 50% of the exercise price can be paid in Company common stock at the election of 3D Systems. This arrangement results in the recognition of RNCI, for which an estimated fair value of $1,559 was recorded as of the acquisition date.
We accounted for the acquisition of Kumovis using the acquisition method, as prescribed by ASC 805. In accordance with valuation methodologies described in ASC 820, the acquired assets and assumed liabilities were recorded at their estimated fair values as of the date of the Kumovis acquisition. The table below reflects the fair value of both the consideration transferred and the RNCI.
| | | | | |
| (in thousands) | |
| Cash paid at acquisition | $ | 34,098 | |
| Deferred cash consideration | 3,628 | |
| Estimated fair value of RNCI | 1,559 | |
| Total fair value of consideration transferred | $ | 39,285 | |
Shown below is the current preliminary purchase price allocation, which summarizes the fair values of the assets acquired and liabilities assumed at the date of acquisition:
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
| | | | | | | | | | | | | | |
| (in thousands) | | | | |
| Current assets, including cash acquired of $125 | | | | $ | 1,407 | |
| Intangible assets: | | | | |
| Product technology | | $ | 20,770 | | | |
| Trade name | | 5,802 | | | |
| Total intangible assets | | | | 26,572 | |
| Goodwill | | | | 17,469 | |
| Other assets | | | | 705 | |
| Liabilities: | | | | |
| Accounts payable and accrued liabilities | | $ | 332 | | | |
| Deferred revenue | | 70 | | | |
| Deferred tax liability | | 6,466 | | | |
| Total liabilities | | | | 6,868 | |
| Net assets acquired | | | | $ | 39,285 | |
The goodwill recognized is attributable to synergies which are expected to enhance and expand the Company’s overall product portfolio and opportunities in new and existing markets, future products that have yet to be determined and Kumovis’s assembled workforce. This goodwill is not expected to be deductible for tax purposes.
The Company continues to review the final closing balance sheet of Kumovis and may further adjust the acquisition-date fair values of acquired assets and assumed liabilities based on this review. The Company also continues to review Kumovis’s pre-acquisition tax returns to determine the final tax positions, including net operating losses and any required valuation allowance. The final purchase price allocations will be completed when the Company has finished its valuation activities and the review of Kumovis’s closing balance sheet and the pre-acquisition tax returns. The final allocations could differ materially from the current preliminary allocations. The final allocations may include (1) changes in allocations to acquired intangible assets and goodwill, (2) changes to other assets and liabilities, including but not limited to tax assets and liabilities, inclusive of deferred taxes, and (3) Acquisitionschanges to the initial acquisition-date RNCI balance. The estimated useful lives of acquired intangible assets are also preliminary.
Titan
On April 1, 2022, we completed the acquisition of 100% of Titan Additive LLC ("Titan") for an all-cash purchase price of $39,040. Titan, which is part of the Industrial Solutions segment and reporting unit, is a pellet-based extrusion platform that addresses customer applications requiring large build volumes, superior performance, and improved productivity at significantly lower cost. We believe the acquisition of Titan will open up new markets in the Industrial Solutions segment. The revenue generated from the acquisition date through December 31, 2022 was immaterial and the acquisition’s near-term impact on the Company’s results of operations and cash flows is expected to be dilutive. In addition, the Company incurred $612 of acquisition-related expenses that are reported in Selling, general and administrative expenses in the consolidated statements of operations.
We accounted for the acquisition of Titan using the acquisition method, as prescribed by ASC 805. In accordance with valuation methodologies described in ASC 820, the acquired assets and assumed liabilities were recorded at their estimated fair values as of the date of the Titan acquisition.
Shown below is the current preliminary purchase price allocation, which summarizes the fair values of the assets acquired and liabilities assumed at the date of acquisition:
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
| | | | | | | | | | | | | | |
| (in thousands) | | | | |
| Current assets | | | | $ | 661 | |
| Intangible assets: | | | | |
| Product technology | | $ | 15,940 | | | |
| Trade name | | 5,580 | | | |
| Total intangible assets | | | | 21,520 | |
| Goodwill | | | | 17,430 | |
| Other assets | | | | 68 | |
| Liabilities: | | | | |
| Accounts payable and accrued liabilities | | $ | 229 | | | |
| Deferred revenue | | 410 | | | |
| Total liabilities | | | | 639 | |
| Net assets acquired | | | | $ | 39,040 | |
The goodwill recognized is attributable to synergies which are expected to enhance and expand the Company’s overall product portfolio and opportunities in new and existing markets, future products that have yet to be determined and Titan’s assembled workforce. This goodwill is expected to be deductible for tax purposes.
The Company continues to review the final closing balance sheet of Titan and may further adjust the acquisition-date fair values of acquired assets and assumed liabilities based on this review. The Company also continues to review Titan’s pre-acquisition tax returns in order to determine the final tax positions, including net operating losses and any required valuation allowance. The final purchase price allocations will be completed when the Company has finished its valuation activities and the review of Titan’s closing balance sheet and the pre-acquisition tax returns. The final allocations could differ materially from the current preliminary allocations. The final allocations may include (1) changes in allocations to acquired intangible assets and goodwill and (2) changes to other assets and liabilities, including but not limited to tax assets and liabilities, inclusive of deferred taxes. The estimated useful lives of acquired intangible assets are also preliminary.
Dussur
In March 2022, we and the Saudi Arabian Industrial Investments Company ("Dussur") signed an agreement to form a joint venture intended to expand the use of additive manufacturing within the Kingdom of Saudi Arabia and surrounding geographies, including the Middle East and North Africa. The joint venture is to enable the development of Saudi Arabia's domestic additive manufacturing production capabilities, consistent with the Kingdom’s ‘Vision 2030,’ which is focused on diversification of the economy and long-term sustainability. Once the joint venture is formed, 3D Systems will own approximately 49% and is committed to an initial investment of about $6,500, of which $3,435 has been deposited in an escrow account and is reported as restricted cash within other assets on the balance sheet as of December 31, 2022. Use of the amount deposited in escrow is limited to funding the Company's initial investment in the joint venture, and such amount is expected to be deposited into a bank account of the joint venture for use in its operations or to pay outstanding liabilities upon legal formation. Additional future investments are contingent upon achievement of certain milestones by the joint venture. The impact on the Company’s financial position, results of operations and cash flows is not expected to be material other than the cash outflow(s) related to the initial and contingent investments.
Enhatch
In March 2022, we made a $10,000 investment in convertible preferred shares for an approximate 26.6% ownership interest in Enhatch Inc. ("Enhatch"), the developer of the Intelligent Surgery Ecosystem. We simultaneously entered into a supply agreement with Enhatch. We also obtained warrants to purchase additional shares of Enhatch, as well as the right to purchase in the future ("call option") the remaining shares of Enhatch that 3D Systems does not own if certain revenue targets are achieved. The investment, including the embedded call option and the warrants, are recorded in other assets on the consolidated balance sheet.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Enhatch's Intelligent Surgery Ecosystem provides technologies which streamline and scale the design and delivery of patient-specific medical devices by automating the process. Incorporating these capabilities into 3D Systems’ workflow for patient-specific solutions, which includes advanced software, expert treatment planning services, custom implants and instrumentation design, and industry-leading production processes, will help more efficiently meet the growing demand for personalized medical devices.
As of the investment date, a fair value was determined for each element of the Enhatch transaction, including the convertible preferred shares, inclusive of the embedded call option, and the warrants, for which the total fair value was $10,000. As of the investment date, the fair values of the convertible preferred shares, inclusive of the embedded call option, and warrants were $9,670 and $330, respectively. The convertible preferred shares and call option were recorded at their initial fair value and are subsequently evaluated for impairment or the existence of an orderly and observable transaction indicating that a change in carrying value is appropriate, for which any adjustment will be recorded through the statement of operations. The warrants are marked to market on a quarterly basis, with the changes in fair value recorded through the statement of operations.
During the third quarter of 2022, the Company recorded an impairment charge of $2,770 related to the carrying value of the convertible preferred stock, inclusive of the embedded call option, held in Enhatch. This impairment charge was the result of lower than projected revenues recognized by Enhatch during the third quarter of 2022, as well as a reduction to near-term forecasted revenues due to a delay in receiving certain regulatory approvals. In addition, the carrying value of the Enhatch warrants, which are required to be recorded at their fair value as of the end of each quarter, has been reduced from their initial fair value of $330 to $200 during the year ended December 31, 2022. The Company has recorded the impairment charge related to its Enhatch investment, as well as the change in the fair value of the Enhatch warrants, within interest and other income (expense), net on the statement of operations for the year ended December 31, 2022.
See Note 21 for additional information related to Enhatch.
Volumetric
On December 1, 2021, we acquired Volumetric Biotechnologies, Inc. (“Volumetric”) for $40,173, of which $24,814 was paid in cash, and the remainder was paid via the issuance of 720 shares of the Company's common stock having a fair value on the date of issuance of $15,359. We also incurred approximately $1,306 of acquisition-related expenses during the year ended December 31, 2021, which are reported in selling, general and administrative expenses in the consolidated statements of operations. Additional payments of up to $355,000 are possible upon (1) the attainment of seven non-financial milestones, each of which requires achievement prior to either December 31, 2030 or December 31, 2035, and (2) the continued employment of certain key individuals from Volumetric. Any additional payments made will be paid approximately half in cash and half in shares of the Company’s common stock. The additional payments are considered compensation expense, which will be recorded ratably from the time a milestone is deemed probable of achievement through the estimated time of achievement. Any compensation expense recorded will be reversed if the milestone is no longer deemed probable of achievement. As of December 31, 2022 and 2021, one of the seven milestones was considered probable of achievement, resulting in the recognition of $15,918 and $1,326 of expense during the years ended December 31, 2022 and 2021, respectively. The impact of potential share issuances related to the achievement of milestones is not included in dilutive shares for purposes of calculating diluted earnings per share until the milestone is met.
Volumetric’s mission is to develop the ability to manufacture human organs using bioprinting methods and the underlying technologies required to create these highly complex biological structures. With this acquisition, 3D Systems seeks to expand our capabilities and capacity in 3D printing related to bio-printing and regenerative medicine. Combining 3D Systems' regenerative medicine group with Volumetric’s highly complementary skill sets of biological expertise and cellular engineering is expected to accelerate our core regenerative medicine strategies which include the bio-printing of human organs, additional non-organ applications and bio-printing technologies for research labs.
We accounted for the acquisition of Volumetric using the acquisition method, as prescribed by ASC 805. In accordance with valuation methodologies described in ASC 820, the acquired assets and assumed liabilities were recorded at their estimated fair values as of the date of acquisition.
Shown below is the final purchase price allocation, which summarizes the fair values of the acquired assets and liabilities assumed at the date of acquisition:
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
| | | | | | | | | | | | | | |
| (in thousands) | | | | |
| Current assets, including cash acquired of $389 | | | | $ | 3,143 | |
| Intangible assets: | | | | |
| Product technology | | $ | 1,100 | | | |
| Distributor relationship | | 400 | | | |
| Total intangible assets | | | | 1,500 | |
| Goodwill | | | | 37,492 | |
| Other assets | | | | 1,194 | |
| Liabilities: | | | | |
| Accounts payable and accrued liabilities | | $ | 3,156 | | | |
| Total liabilities | | | | 3,156 | |
| Net assets acquired | | | | $ | 40,173 | |
During the year ended December 31, 2022, the Company updated its preliminary valuation of the fair value of acquired assets and assumed liabilities. As a result of the incremental valuation procedures performed during the current year, the preliminary acquisition-date fair value assigned to the acquired intangible assets increased by $861. This increase in fair value was offset by a corresponding decrease in the acquisition-date fair value of goodwill and resulted in an immaterial cumulative catch-up adjustment to amortization expense.
The goodwill recognized is attributable to synergies which are expected to enhance and expand the Company’s overall product portfolio and opportunities in new and existing markets, future products that have yet to be determined and Volumetric’s assembled workforce. Goodwill is not expected to be deductible for tax purposes.
Volumetric is part of the Healthcare Solutions reporting unit and segment. The acquisition’s impact on the Company's results of operations and cash flows has been dilutive.
Oqton
On November 1, 2021, we acquired Oqton, Inc. (“Oqton”), for $188,168, excluding customary closing adjustments. $107,471$187,775, of which $107,078 was paid in cash, and the remainder was paid via the issuance of 2,553 shares of the Company’s common stock having a fair value at the date of issuance of $80,697. The acquisition’s near term impact on the Company’s results of operations and cash flows are expected to be dilutive. Oqton's operating results will be reported in the Industrial segment. We also incurred approximately $1,458$1,780 of acquisition related expenses.expenses during the year ended December 31, 2021, which are reported in selling, general and administrative expenses in the consolidated statements of operations.
Oqton is a software company that creates an intelligent, cloud-based Manufacturing Operating System (MOS)("MOS") platform tailored for flexible production environments that increasingly utilize a range of advanced manufacturing and automation technologies, including additive manufacturing (AM) solutions, in their production workflows. The cloud-based solution leverages the Industrial Internet of Things, artificial intelligence, and machine learning technologies to deliver a solution for customers to automate their digital manufacturing workflows, scale their operations and enhance their competitive position. The Oqton acquisition will allow the Company to expand its existing additive manufacturing software suite to the entire additive industry.
We accounted for the Acquisitionacquisition of Oqton using the acquisition method, as prescribed by Accounting Standards Codification (ASC) 805 Business Combinations.ASC 805. In accordance with valuation methodologies described in ASC 820, Fair Value Measurement, the acquired assets and assumed liabilities were recorded at their estimated fair values at as of the date of the Oqton acquisition.
Shown below is the preliminaryfinal purchase price allocation, which summarizes the fair valuevalues of the assets acquired and liabilities assumed at the date of acquisition:
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
| | | | | | | | | | | | | | |
| (in thousands) | | | | |
Current assets, including cash acquired of $3,454$7,603 | | | | $ | 4,4628,344 | |
| Intangible assets: | | | | |
| Product technology | | $ | 11,20012,600 | | | |
| Trade name | | 6,8007,300 | | | |
| Total intangible assets | | | | 18,00019,900 | |
| Goodwill | | | | 167,576165,904 | |
| Other assets | | | | 855760 | |
| Liabilities: | | | | |
| Accounts payable and accrued liabilities | | $ | 2,2356,643 | | | |
| Deferred revenue | | 490 | | | |
| Total liabilities | | | | 2,7257,133 | |
| Net assets acquired | | | | $ | 188,168187,775 | |
OnDuring the year ended December 1, 2021, we acquired Volumetric Biotechnologies, Inc. (“Volumetric”), for $40,172 of which $24,814 was paid in cash and31, 2022, the remainder was paid via the issuance of 720 sharesCompany updated its preliminary valuation of the Company's common stock having a fair value onof acquired assets and assumed liabilities. As a result of the dateincremental valuation procedures performed during the current year, the preliminary acquisition-date fair value assigned to the acquired product technology and trade name increased by $1,400 and $500, respectively. These increases in fair value were primarily offset by a corresponding decrease in the acquisition-date fair value of issuance of $15,358. Additional payments of upgoodwill and resulted in an immaterial cumulative catch-up adjustment to $355,000 are possibleamortization expense.
The goodwill recognized is attributable to synergies which are linkedexpected to the attainment of 7 non-financial milestones through December 31, 2030enhance and 2035 and continued employment of certain key individuals from Volumetric. Any additional payments made will be paid approximately half in cash and half in shares ofexpand the Company’s common stock. The additional paymentsoverall product portfolio and opportunities in new and existing markets, future products that have yet to be determined and Oqton’s assembled workforce. Goodwill is non-deductible for tax purposes.
Oqton's operating results are considered compensation expense which will be recorded ratably fromreported in the time a milestone is deemed probable of achievement to the estimated time of achievement. Any compensation expense recorded will be reversed if the milestone is no longer probable of achievement. As of December 31, 2021, 1 of the 7 milestones are considered probable of achievement for which $1,326 of expense was recorded in 2021. Volumetric will be part of the Healthcare reporting unit andIndustrial Solutions segment. The acquisition’s near-term impact on the Company'sCompany’s results of operations and cash flows are expected to behas been dilutive. The impact of potential share issuance related to the achievement of milestones is not included in dilutive shares until the milestone is met. We incurred approximately $1,200 of acquisition related expenses.
Volumetric’s mission is to develop the ability to manufacture human organs using bioprinting methods and the underlying technologies required to create these highly complex biological structures. With this acquisition, 3D Systems will expand our capabilities and capacity in 3D printing related to bio-printing and regenerative medicine. Combining 3D Systems regenerative medicine group with Volumetric’s highly complementary skill sets of biological expertise and cellular engineering is expected to accelerate our core regenerative medicine strategies which include the bio-printing of human organs, additional non-organ applications and bio-printing technologies for research labs.Other
We accounted for the Acquisition using the acquisition method as prescribed by Accounting Standards Codification (ASC) 805 Business Combinations. In accordance with valuation methodologies described in ASC 820 Fair Value Measurement, the acquired assets and assumed liabilities were recorded at their estimated fair values at as of the date of acquisition.
Shown below is the preliminary purchase price allocation, which summarizes the fair value of the assets and liabilities assumed, at the date of acquisition:
| | | | | | | | | | | | | | |
Current assets, including cash acquired of $389 | | | | $ | 3,143 | |
Intangible assets: | | | | |
Patents | | $ | 639 | | | |
Total intangible assets | | | | 639 | |
Goodwill | | | | 38,620 | |
Other assets | | | | 1,194 | |
Liabilities: | | | | |
Accounts payable and accrued liabilities | | 3,424 | | | |
Total liabilities | | | | 3,424 | |
Net assets acquired | | | | $ | 40,172 | |
The Company has performed preliminary valuation analyses of the fair market value of acquired assets and liabilities of both Oqton and Volumetric. The final purchase price allocations will be determined when the Company has completed and fully reviewed the detailed valuations and determined the final purchase consideration for items such as but not limited to working capital adjustments. The final allocations could differ materially from the preliminary allocations. The final allocations may include changes in allocations to acquired intangible assets, changes to assets and liabilities including but not limited to deferred tax assets and liabilities and tax liabilities, as well as goodwill. The estimated useful lives of acquired intangible assets are also preliminary.
On May 6, 2021, we purchased Allevi, Inc. ("Allevi") to expand regenerative medicine initiatives into medical and pharmaceutical research and development laboratories. Additionally, onin June 15, 2021, we closed the acquisition of a German software firm, Additive WorksWork s GmbH (“Additive”). Additive expands the simulation capabilities for rapid optimization of industrial-scale 3D printing processes. The purchase price for both acquisitions, individually and combined, andas well as the expected impacts onto the Company’s financial position, results of operations and cash flows, are not material.
Acquisitions of NoncontrollingNon-controlling Interests
We own 100% of the capital and voting rights of Robtec, a service bureau and distributor of 3D printing and scanning products in Brazil. Approximately 70% of the capital and voting rights of Robtec were acquired on November 25, 2014. On January 7, 2020, we made a payment equal to the redemption price of $10,000 and acquired the remaining 30% of the capital and voting rights.
We own 100%As of December 31, 2018, the Company owned approximately 70% of the capital and voting rights of Easyway, a service bureau and distributor of 3D printing and scanning products in China. Approximately 65% of the capital and voting rights of Easyway were acquired on April 2, 2015, and an additional 5% of the capital and voting rights of Easyway were acquired on July 19, 2017 for $2,300. The remaining 30% of the capital and voting rights of Easyway were acquired on January 21, 2019 for $13,500, to bewhich has been paid in installments over four years for whichinstallments. Of the total installment payments made, $2,300, $6,300, and $2,500 were paid induring the years ended December 31, 2022, 2021 and 2020, respectively. As of December 31, 2022, there are no more installments due.
(4) Dispositions
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
(4) Divestitures
ODM
In September 2021, we completed the sale of the Company’s On Demand Manufacturing business ("ODM") for $82,000, excluding certain customary closing adjustments. We recorded a gain on the sale of $38,490 within interest and other income (expense), net on the accompanying consolidated statements of operations for the year ended December 31, 2021. ODM was primarily included within the Industrial Solutions segment. At closing, the Company and the purchaser entered into a supply agreement and a transition services agreement pursuant to which the Company agreed to provide certain information technology, corporate finance, tax, treasury, accounting, human resources and payroll, sales and marketing, operations, facilities and other customary services to support the purchaser in the ongoing operation of ODM for a period of time post-closing. At December 31, 2022 only the supply agreement was active.
Simbionix
On August 24, 2021, we completed the sale of 100% of the issued and outstanding equity interests of Simbionix USA Corporation, which owned our global medical simulation business, for $305,000, excluding certain closing adjustments and excluding $6,794 of cash transferred to the purchaser. We recorded a gain on the sale of $271,404 within interest and other income (expense), net on the accompanying consolidated statement of operations for the year ended December 31, 2021. Additionally, we recognized a gain of $2,431 upon the reclassification of accumulated foreign currency translation gains previously included in accumulated other comprehensive loss (“AOCL”), which is included within interest and other income (expense), net for the year ended December 31, 2021. Simbionix was included within the Healthcare Solutions segment.
Cimatron
On January 1, 2021, we completed the sale of 100% of the issued and outstanding equity interests of Cimatron Ltd. ("Cimatron"(“Cimatron”), the subsidiary that operated the Company’s Cimatron integrated CAD/CAM software for tooling business and its GibbsCAM CNC programming software business, for approximately $64,173, after certain adjustments and excluding $9,476 of cash amounts transferred to the purchaser. We recorded a gain on the sale of $32,047 included within Interestinterest and other income (expense), net on the accompanying consolidated statementsstatement of operations for the year ended December 31, 2021. Additionally, at the time of the sale, we recognized a gain of $6,481 for$6,481 upon the reclassification of accumulated foreign currency translation gain previously included in Accumulated other comprehensive loss (“AOCL”), which is included within Interest and other income (expense), net. This disposed of business would have been included within the Industrial segment.
The components of Cimatron's assets and liabilities recorded as held for sale on the consolidated balance sheet at December 31, 2020 were as follows:
| | | | | | | | |
(in thousands) | | December 31, 2020 |
Assets | | |
Cash and cash equivalents | | $ | 9,161 | |
Accounts receivable, net of reserves of $1,154 | | 5,361 | |
Inventories | | 155 | |
Prepaid expenses and other current assets | | 3,762 | |
| | |
Total current assets held for sale | | 18,439 | |
Property and equipment, net | | 202 | |
Intangible assets, net | | 6,642 | |
Goodwill | | 21,385 | |
Right of use assets | | 898 | |
Deferred income tax asset | | 560 | |
Other assets | | 1,997 | |
Total assets held for sale | | $ | 50,123 | |
Liabilities | | |
Current right of use liabilities | | $ | 445 | |
Accounts payable | | 654 | |
Accrued and other liabilities | | 5,631 | |
| | |
Customer deposits | | 25 | |
Deferred revenue | | 4,352 | |
Total current liabilities held for sale | | 11,107 | |
Long-term right of use liabilities | | 518 | |
| | |
Other liabilities | | 2,434 | |
Total liabilities held for sale | | $ | 14,059 | |
In September 2021, we completed the sale of the Company’s On Demand Manufacturing business ("ODM") for $82,000, excluding certain adjustments. We recorded a gain on the sale of $38,490 included within Interest and other income (expense), net on the accompanying consolidated statements of operations for the year ended December 31, 2021. ODM was primarily included within the Industrial segment. At closing, the Company and the purchaser entered into a supply agreement and a transition services agreement pursuant to which the Company will provide certain information technology, corporate finance, tax, treasury, accounting, human resources and payroll, sales and marketing, operations, facilities and other customary services to support the purchaser in the ongoing operation of ODM for a period of time post-closing.
On August 24, 2021, we completed the sale of 100% of the issued and outstanding equity interests of Simbionix USA Corporation, which owned our global medical simulation business (“Simbionix”), for $305,000, excluding certain closing adjustments and excluding $6,794 of cash transferred to the purchaser. We recorded a gain on the sale of $271,404 included within Interest and other income (expense), net on the accompanying consolidated statements of operations for the year ended December 31, 2021. Additionally, we recognized a gain of $2,431 for accumulated foreign currency translation gaingains previously included in AOCL, which is included within Interestinterest and other income (expense), net. Simbionixnet for the year ended December 31, 2021. Cimatron was included within the HealthcareIndustrial Solutions segment.
Other
In November 2020, we sold our Australia ODM business in an asset sale for $685. The carrying value of the net assets disposed, including net working capital and allocable goodwill, was $1,482. In December 2020, we sold our Wuxi Easyway business in an asset sale for $79. The carrying value of the net assets disposed, including net working capital and allocable goodwill, was $3,806. Recognized losses of $4,524 were included in 2020within interest and other expense,income (expense), net on the consolidated statement of operations.
(5) Revenue
We account for revenue in accordance with ASC Topic 606, “Revenue from Contracts with Customers,”.606.
Performance Obligations
A performance obligation is a promise in a contract to transfer a distinct good or service to the customer, and is the unit of account in ASC Topic 606. A contract’s transaction price is allocated to each distinct performance obligation and recognized as revenue when, or as, the performance obligation is satisfied.
At December 31, 2021,2022, we had $143,169$80,639 of outstanding performance obligations, comprised of deferred revenue, customer order backlog and customer deposits. We expect to recognize approximately 77.0%89.4% of the $38,348 of deferred revenue and customer deposits as revenue within the next twelve months, an additional 13.0%6.0% by the end of 20232024 and the remaining balance thereafter.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Revenue Recognition
Revenue is recognized when control of the promised products or services is transferred to customerscustomers. Revenue is recognized in an amount that reflects the consideration we expect to receive in exchange for those products or services. We enter into contracts that can include various combinations of products and services, which are generally capable of being distinct and, accordingly, are accounted for as separate performance obligations. Many of our contracts with customers include multiple performance obligations. For such arrangements, we allocate revenue to each performance obligation based onupon its relative stand-alone selling price (“SSP”). Revenue is recognized net of allowances for returns and any taxes collected from customers whichthat are subsequently remitted to governmental authorities. The amount of consideration received and revenue recognized may vary based on changes in marketing incentive programs offered to our customers. Our marketing incentive programs take many forms, including volume discounts, trade-in allowances, rebates and other discounts.
A majority of our revenue is recognized at the point in time when products are shipped or services are delivered to customers. Please see below for further discussion.
Hardware and Materials
Revenue from hardware and material sales is recognized when control has transferred to the customer, which typicallygenerally occurs when the goods have been shipped or delivered to the customer, risk of loss has transferred to the customer, and we have a present right to payment for the hardware.payment. In limited circumstances, when printer or other hardware sales include substantive customer acceptance provisions, revenue is recognized either when customer acceptance has been obtained, customer acceptance provisions have lapsed, or we have objective evidence that the criteria specified in the customer acceptance provisions have been satisfied.
Printers and certain other products include a warranty under which we provide maintenance for periods up to one year. For these initial product warranties, estimated costs are accrued at the time of the sale of the product. These cost estimates are established using historical information onregarding the nature, frequency and average cost of claims for each type of printer or other product, as well as assumptions about future activity and events. Revisions to expense accruals are made as necessary based on changes in these historical and future factors.
Software
We also market and sell software tools that enable our customers to capture and customize content using our printers, design optimization and simulation software, and reverse engineering and inspection software. SoftwareOur software does not require significant modification or customization, and the license provides the customer with a right to use the software as it exists when made available. Revenue from these software licenses is recognized either upon delivery of the product or of a key code which allows the customer to download the software. Customers may purchase post-sale support. Generally, the first year of support is included, but subsequent years are optional. This optional support is considered a separate obligation from the software andsoftware. Accordingly, revenue is deferred at the time of sale and subsequently recognized ratably over future periods.
Services
We offer training, installation and non-contract maintenance services for our products. Additionally, we offer maintenance contracts customers can purchase at their option. For maintenance contracts, revenue is deferred at the time of sale based on the stand-alone selling prices of these services. Deferred revenue is recognized ratably over the term of the maintenance period on a straight-line basis and costs are expensed as incurred. Revenue from training, installation and non-contract maintenance services is recognized at the time of performance of the service.
We have also recently commenced selling software as a service, whereby the customer has the right to access the software.Revenue is recognized ratably over the related subscription period, as our performance obligation to provide access to the software is progressively fulfilled over the stated term of the contract.
On demand manufacturing and Healthcare Solutions service sales are included within services revenue, and revenue is recognized upon shipment or delivery of the parts or performance of the service, based on the terms of the arrangement. We disposed of the majority of our service revenue businesses including Cimatron, Simbionix, and ODM, which were minimally offset by the purchase of Oqton. See Note 3 and Note 4.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Collaboration and Licensing Agreements
We enter into collaboration and licensing agreements with third parties. The nature of the activities to be performed and the consideration exchanged under the agreements varies on a contract by contractcontract-by-contract basis. We evaluate these agreements to determine whether they meet the definition of a customer relationship for which revenue is recorded. These contracts may contain multiple performance obligations and may contain fees for licensing, research and development services, contingent milestone payments upon the achievement of developmental contractual criteria and/or royalty fees based on the licensees’ product revenue. We determine the revenue to be recognized for these agreements based on an evaluation of the distinct performance obligations, the identification and evaluation of material rights, the estimation of variable consideration and the determination of the pattern onof transfer of control for each distinct performance obligation. The Company recognized $13,497, $6,804 $6,953 and $7,260$6,953 in revenue related to collaboration arrangements with customers for the years ended December 31, 2022, 2021 and 2020, and 2019, respectively.
Services
We offer training, installation and non-contract maintenance services for our products. Additionally, we offer maintenance contracts that customers can purchase at their option. For maintenance contracts, revenue is deferred at the time of sale based on the stand-alone selling prices of these services and costs are expensed as incurred. Deferred revenue is recognized ratably over the term of the maintenance period on a straight-line basis. Revenue from training, installation and non-contract maintenance services is recognized at the time of performance of the service.
On demand manufacturing and healthcare service sales are included within services revenue and revenue is recognized upon shipment or delivery of the parts or performance of the service, based on the terms of the arrangement. We disposed of the majority of our service revenue businesses, including; Cimatron, Simbionix, and ODM, which were minimally offset by the purchase of Oqton. See Note 3 and Note 4.
Terms of saleSale
Shipping and handling activities are treated as fulfillment costs rather than as an additional promised service. We accrue the costs of shipping and handling when the related revenue is recognized. Our incurred costs associated with shipping and handling are included in product cost of sales.
CreditCreditworthiness is determined, and credit is extended, and creditworthiness is determined, based onupon an evaluation of each customer’s financial condition. New customers are generally required to complete a credit application and provide references and bank information to facilitate an analysis of creditworthiness. Customers with a favorable profile may receive credit terms that differ from our general credit terms. Creditworthiness is considered, among other things, in evaluating our relationship with customers with past due balances.
Our terms of sale generally provide payment terms that are customary in the countries where we transact business. To reduce credit risk in connection with certain sales, we may, depending upon the circumstances, require significant deposits or payment in full prior to shipment. For maintenance services, we either bill customers on a time-and-materials basis or sell maintenance contracts that provide for payment in advance on either an annual or other periodic basis.
Significant Judgments
Our contracts with customers often include promises to transfer multiple products and services to a customer. For such arrangements, we allocate revenuesrevenue to each performance obligation based on its relative SSP.
Judgment is required to determine the SSP for each distinct performance obligation in a contract. For the majority of items, we estimate SSP using historical transaction data. We use a range of amounts to estimate SSP when we sell each of the products and services separately and need to determine whether there is a discount to be allocated based on the relative SSP of the various products and services. In instances where SSP is not directly observable, such as when the product or service is not sold separately, we determine the SSP using information that may include market conditions and other observable inputs.
In some circumstances, we have more than one SSP for individual products and services due to the stratification of those products and services by customers, geographic region or other factors. In these instances, itwe may use information such as the size of the customer and geographic region in determining the SSP.
The determination of SSP is an ongoing process, and information is reviewed regularly in order to ensure SSP reflects the most current information or trends.
The nature of our marketing incentives may lead to consideration that is variable. Judgment is exercised at contract inception to determine the most likely outcome of the contract and resulting transaction price. Ongoing assessments are performed to determine if updates are needed to the original estimates.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Contract Balances
The timing of revenue recognition, billings and cash collections results in the recognition of billed accounts receivable and unbilled receivables (contract assets), and customer deposits and deferred revenuesrevenue (contract liabilities) on theour consolidated balance sheets. Timing of revenue recognition may differ from the timing of invoicing to customers. We record aaccounts receivable when revenue is recognized at the time of invoicing, orand unbilled receivables when revenue is recognized prior to invoicing. For most of our contracts, customers are invoiced when products are shipped or when services are performed resulting in billed accounts receivables for the remainder of the owed contract price. Unbilled receivables generally result from items being shipped where the customer has not been charged, but for which revenue hadhas been recognized or when certain performance milestones are deemed probable of achievement. In our on demand manufacturing business, which was sold in September of 2021, customers may be required to pay in full before work begins on their orders, resulting in customer deposits. We typically bill in advance for installation, training and maintenance contracts, as well as for extended warranties, resulting in deferred revenue. Changes in contract asset and liability balances were not materially impacted by any other factors for the periodyear ended December 31, 2021. Contract assets with a remaining performance obligation are netted with contract liabilities.2022.
ThroughDuring the year ended December 31, 2022, we recognized revenue of $31,038 related to our contract liabilities at December 31, 2021. During the year ended December 31, 2021, we recognized revenue of $30,302 related to our contract liabilities at December 31, 2020. Through December 31, 2020, we recognized revenue of $30,635 related to our contract liabilities at December 31, 2019. Through2020. During the year ended December 31, 2019,2020, we recognized revenue of $26,486$30,635 related to our contract liabilities at December 31, 2018.2019.
Practical Expedients and Exemptions
We generally expense sales commissions when incurred because the amortization period would be one year or less. These costs are recorded within selling, general and administrative expenses.
Revenue Concentrations
For the years ended December 31, 2022, 2021, 2020, and 2019,2020, one customer accounted for approximately 22%23%, 13%22% and 11%13% of our consolidated revenue, respectively. We expect to maintain our relationship with this customer.
Revenue by geographic region for the years ended December 31, 2022, 2021, and 2020 and 2019 werewas as follows:
| | | | | | | | | | | | | | | | | |
| Year Ended December 31, |
| (in thousands) | 2021 | | 2020 | | 2019 |
| Americas | $ | 344,619 | | | $ | 280,028 | | | $ | 323,085 | |
| EMEA | 201,684 | | | 213,575 | | | 240,403 | |
| APAC | 69,336 | | | 63,637 | | | 72,866 | |
| Total | $ | 615,639 | | | $ | 557,240 | | | $ | 636,354 | |
| United States (Included in Americas above) | $ | 341,123 | | | $ | 275,145 | | | $ | 313,910 | |
| | | | | | | | | | | | | | | | | |
| Year Ended December 31, |
| (in thousands) | 2022 | | 2021 | | 2020 |
| Americas | $ | 308,516 | | | $ | 344,619 | | | $ | 280,028 | |
| EMEA | 167,114 | | | 201,684 | | | 213,575 | |
| APAC | 62,401 | | | 69,336 | | | 63,637 | |
| Total | $ | 538,031 | | | $ | 615,639 | | | $ | 557,240 | |
| United States (included in Americas above) | $ | 304,503 | | | $ | 341,123 | | | $ | 275,145 | |
(6) Segment Information
Effective January 1, 2021, we changed our segment reporting under ASC 280 Segment Reporting. For periods prior to January 1, 2021, we operated under 1 operating segment, consistent with the information that was presented to our CODM. Effective January 1, 2021, we have identified 2 operating segments,two reportable segments: Healthcare Solutions and Industrial.Industrial Solutions.
This change in reportable segments was necessitated as a result of changes to our enterprise wideenterprise-wide financial reporting to reflect the re-organization of the business into the Healthcare Solutions and Industrial Solutions verticals that were launched January 1, 2021 at the request of our CODM. These changes resulted in revisions to the financial information provided to the CODM on a recurring basis in his evaluation of the financial performance of the Company and in the decision-making process driving future operating performance. TheHowever, the CODM does not review disaggregated assetsasset information on a segment basis;the basis of the Company's segments; therefore, such information is not presented. In addition, the changes made to our enterprise wide financial reporting system were prospective and prevent historical financial informationresults for the Healthcare and Industrial segments to be available other than for revenue which has been disclosed below. We have evaluated potential alternatives to generate comparative prior period financial information for the Healthcare and Industrial segments, and believe that the practicality exception as proscribed in ASC 280 Segment Reporting is applicable due to the high degree of difficulty involved and the significant expense associated with overhauling the structure of legacy financial systems.
The following table set forth our net sales and operating results by segment:
| | | | | | | | | | | | | | | | | | | |
| Year Ended December 31, |
| 2021 | | 2020 | | 2021 | | |
| (in thousands) | Net Sales (a) | | Operating Profit |
| Operations by segment: | | | | | | | |
| Healthcare | $ | 306,184 | | | $ | 246,437 | | | $ | 69,358 | | | |
| Industrial | 309,455 | | | 310,803 | | | 48,555 | | | |
| | | | | | | |
| Total | $ | 615,639 | | | $ | 557,240 | | | 117,913 | | | |
General corporate expense, net (b) | | | | | (150,982) | | | |
| Operating loss, as reported | | | | | (33,069) | | | |
| Interest and other income, net | | | | | 352,609 | | | |
| Income before income taxes | | | | | $ | 319,540 | | | |
a.Approximately 44.6% and 50.6% of sales for thefiscal year ended December 31, 2021 and 2020 respectively, were located outsidehave not been presented on the basis of our revised segmentation as the U.S.Company did not report those results internally or externally on the basis of Healthcare versus Industrial. Accordingly, restating our results for the period based upon our revised segmentation was not practicable.
b.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
The following tables set forth our operating results by segment for the years ended December 31, 2022 and 2021:
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| Year Ended December 31, |
| 2022 | | 2021 |
| Healthcare | | Industrial | | Consolidated | | Healthcare | | Industrial | | Consolidated |
| (in thousands) | | | | | | | | | | | |
| Revenue | $ | 260,988 | | | $ | 277,043 | | | $ | 538,031 | | | $ | 306,184 | | | $ | 309,455 | | | $ | 615,639 | |
| Cost of sales | 162,222 | | | 161,576 | | | 323,798 | | | 170,434 | | | 181,427 | | | 351,861 | |
| Gross profit | 98,766 | | | 115,467 | | | 214,233 | | | 135,750 | | | 128,028 | | | 263,778 | |
| Less: | | | | | | | | | | | |
| Segment operating expenses | 72,954 | | | 92,630 | | | 165,584 | | | 66,392 | | | 79,473 | | | 145,865 | |
| Segment operating income | $ | 25,812 | | | $ | 22,837 | | | 48,649 | | | $ | 69,358 | | | $ | 48,555 | | | 117,913 | |
General corporate expense, net(a) | | | | | 165,668 | | | | | | | 150,982 | |
| Operating (loss) | | | | | $ | (117,019) | | | | | | | $ | (33,069) | |
| | | | | | | | | | | |
| | | | | | | | | | | |
| | | | | | | | | | | |
(a) General corporate expense, net includes expenses not specifically attributable to our segments for functions such as corporate human resources, finance, and legal, including salaries, benefits, and other related costs.
For the year ended December 31, 2022, depreciation and amortization expense was $6,450 for Healthcare Solutions, $10,472 for Industrial Solutions, and $19,650 for corporate. For the year ended December 31, 2021, depreciation and amortization expense was $7,355 for Healthcare Solutions, $13,713 for Industrial Solutions, and $13,643 for corporate.
As of December 31, 2022, and 2021, long-lived assets in the United States totaled $67,334 and $71,611, respectively, and long-lived assets outside of the United States totaled $33,484 and $32,002 respectively.
(7) Leases
We have various lease agreements for our facilities, equipment and vehicles with remaining lease terms ranging from one to sixteenfifteen years. We determine if an arrangement contains a lease at inception. Some leases include the options to purchase, terminate or extend for one or more years; these options are included in the right-of-use (“ROU”) asset and liability lease term when it is reasonably certain an option will be exercised. Our leases do not contain any material residual value guarantees or material restrictive covenants.
Most of our leases do not provide an implicit rate; therefore, we use our incremental borrowing rate based on the information available at the lease commencement date to determine the present value of the future lease payments.
Certain leases include variable costs. Variable costs include non-lease components incurred based upon actual terms rather than contractually fixed amounts. In addition, incremental lease payments that are indexed to a change in rate or index are considered variable costs. Because the ROU asset and lease liability recorded on the balance sheet was determined based upon factors considered at the commencement date, subsequent changes in the rate or index that were not contemplated, result in variable expenses being incurred when actual payments differ from estimated payments.
On February 25, 2021, the Company entered into an agreement to amend its lease for its corporate office and extended the term. As part of this agreement, the Company sold land owned adjacent to our corporate office for $389 and entered into a lease with the buyer of the land for a new building containing approximately 80,000 to 100,000 rentable square feet, to be constructed and funded by the lessor up to a certain amount. The lease terms, as amended, extend through March 31, 2038 for both the existing building and the expansion site extend through August 2037. The leasesite. Lease payments for the new building will not commence untilstarted during December 2022 upon construction isbecoming substantially complete and thecomplete. The total estimated base rent lease payments as of December 31, 2022 are $16,875$19,142, which are not included in the lease information below as the lease hasdid not commenced. commence until February 2023 upon our receipt of the certificate of occupancy and, as a result, the building becoming available for use by the Company.
Additionally, we entered into a lease for a new building in Littleton, CO, containingwhich will contain approximately 50,000 rentable square feet, toand will be constructed and funded by the lessor up to a certain amount. The lease term is for ten years upon commencement, which is when construction is substantially complete. The total estimated base rent lease payments at December 31, 2022 are $14,233, which are not included in the lease information below as the lease has not yet commenced.
Components of lease cost (income) for the years ended December 31, 2022, 2021, and 2020 were as follows:
| | (in thousands) | (in thousands) | | Year Ended December 31, 2021 | | Year Ended December 31, 2020 | (in thousands) | | 2022 | | 2021 | | 2020 |
| Operating lease cost | Operating lease cost | | $ | 10,226 | | | $ | 13,937 | | Operating lease cost | | $ | 9,135 | | | $ | 10,226 | | | $ | 13,937 | |
| | Finance lease cost - amortization expense | Finance lease cost - amortization expense | | 714 | | | 937 | Finance lease cost - amortization expense | | 621 | | | 714 | | 937 |
| Finance lease cost - interest expense | Finance lease cost - interest expense | | 238 | | | 664 | Finance lease cost - interest expense | | 196 | | | 238 | | 664 |
| Short-term lease cost | Short-term lease cost | | 76 | | | 159 | Short-term lease cost | | 705 | | | 76 | | 159 |
| Variable lease cost | Variable lease cost | | 3,163 | | | 1,363 | | Variable lease cost | | 764 | | | 3,163 | | | 1,363 | |
| Sublease income | Sublease income | | (569) | | | (615) | | Sublease income | | (158) | | | (569) | | | (615) | |
| Total | Total | | $ | 13,848 | | | $ | 16,445 | | Total | | $ | 11,263 | | | $ | 13,848 | | | $ | 16,445 | |
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Balance sheet classifications at December 31, 20212022 and 20202021 are summarized below:
| | | December 31, 2021 | | December 31, 2020 | | 2022 | | 2021 |
| (in thousands) | (in thousands) | | Right of use assets | | Current right of use liabilities | | Long-term right of use liabilities | | Right of use assets | | Current right of use liabilities | | Long-term right of use liabilities | (in thousands) | | Right-of-use assets | | Current lease liabilities | | Long-term lease liabilities | | Right-of-use assets | | Current lease liabilities | | Long-term lease liabilities |
| Operating Leases | | $ | 42,502 | | | $ | 7,711 | | | $ | 43,359 | | | $ | 40,586 | | | $ | 8,562 | | | $ | 38,296 | | |
| Finance Leases | | 3,854 | | | 633 | | | 4,061 | | | 8,034 | | | 972 | | | 10,173 | | |
| Operating leases | | Operating leases | | $ | 39,502 | | | $ | 8,343 | | | $ | 38,499 | | | $ | 42,502 | | | $ | 7,711 | | | $ | 43,359 | |
| Finance leases | | Finance leases | | 3,244 | | | 693 | | | 3,280 | | | 3,854 | | | 633 | | | 4,061 | |
| Total | Total | | $ | 46,356 | | | $ | 8,344 | | | $ | 47,420 | | | $ | 48,620 | | | $ | 9,534 | | | $ | 48,469 | | Total | | $ | 42,746 | | | $ | 9,036 | | | $ | 41,779 | | | $ | 46,356 | | | $ | 8,344 | | | $ | 47,420 | |
On September 1, 2020, we closed 2two facilities in connection with our restructuring plan. These facilities occupied leased office space that terminates in 2024. In conjunction with these closings, we recorded impairment chargescharges totaling $1,627 related to our ROU assets and impairment charges totaling $1,953 related to leasehold improvements.
During the 2020 fourth quarter, we recorded ROU assets and liabilities related to lease extensions and renewals that were entered into during the 2019 fourth quarter, 2020 second quarter and 2020 third quarterAs of approximately $1,469, $2,021, and $3,467, respectively. There was not a material income statement impact from recording these lease extensions and renewals during the 2020 fourth quarter.
OurDecember 31, 2022, our future minimum lease payments as of December 31, 2021 under operating leaseleases and finance leases with initial or remaining lease terms in excess of one year were as follows:
| | | December 31, 2021 | | |
| (in thousands) | (in thousands) | | Finance Leases | | Operating Leases | (in thousands) | | Finance Leases | | Operating Leases |
| Years ending December 31: | Years ending December 31: | | | | | Years ending December 31: | | | | |
| 2022 | | $ | 828 | | | $ | 10,199 | | |
| 2023 | 2023 | | 801 | | | 9,110 | | 2023 | | $ | 823 | | | $ | 10,780 | |
| 2024 | 2024 | | 753 | | | 7,518 | | 2024 | | 800 | | | 9,322 | |
| 2025 | 2025 | | 690 | | | 5,830 | | 2025 | | 743 | | | 7,194 | |
| 2026 | 2026 | | 649 | | | 5,153 | | 2026 | | 605 | | | 5,867 | |
| 2027 | | 2027 | | 578 | | | 5,458 | |
| Thereafter | Thereafter | | 1,799 | | | 26,519 | | Thereafter | | 1,012 | | | 22,077 | |
| Total lease payments (undiscounted) | Total lease payments (undiscounted) | | 5,520 | | | 64,329 | | Total lease payments (undiscounted) | | 4,561 | | | 60,698 | |
| Less: imputed interest | Less: imputed interest | | (826) | | | (13,259) | | Less: imputed interest | | (588) | | | (13,856) | |
| Present value of lease liabilities | Present value of lease liabilities | | $ | 4,694 | | | $ | 51,070 | | Present value of lease liabilities | | $ | 3,973 | | | $ | 46,842 | |
Supplemental cash flow information related to our operating leases for the years ending December 31, 2022, 2021 and 2020
was as follows:
| | | | | | | | | | | | | | |
| (in thousands) | | December 31, 2021 | | December 31, 2020 |
| Cash paid for amounts included in the measurement of lease liabilities: | | | | |
| Operating cash outflow from operating leases | | $ | 11,108 | | | $ | 13,151 | |
| Operating cash outflow from finance leases | | 238 | | | 661 | |
| Financing cash outflow from finance leases | | $ | 721 | | | $ | 496 | |
| | | | | | | | | | | | | | | | | | | | |
| (in thousands) | | 2022 | | 2021 | | 2020 |
| Cash paid for amounts included in the measurement of lease liabilities: | | | | | | |
| Operating cash outflow for operating leases | | $ | 10,268 | | | $ | 11,108 | | | $ | 13,151 | |
| Operating cash outflow for finance leases | | $ | 196 | | | $ | 238 | | | $ | 661 | |
| Financing cash outflow for finance leases | | $ | 652 | | | $ | 721 | | | $ | 496 | |
Weighted-averageThe weighted-average remaining lease termsterm and discount rate for our finance and operating leases for the year endingas of December 31, 2022 and 2021 were as follows:
| | | December 31, 2021 | | 2022 | 2021 |
| | Finance | | Operating | | Finance | | Operating | Finance | | Operating |
| Weighted-average remaining lease term (in years) | Weighted-average remaining lease term (in years) | | 7.4 | | 8.7 | Weighted-average remaining lease term (in years) | | 6.2 | | 7.7 | 7.4 | | 8.7 |
| Weighted-average discount rate | Weighted-average discount rate | | 4.63% | | 5.45% | Weighted-average discount rate | | 4.83% | | 6.49% | 4.63% | | 5.45% |
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
(8) Inventories
Components of inventories at December 31, 20212022 and 20202021 are summarized as follows:
| | (in thousands) | (in thousands) | 2021 | | 2020 | (in thousands) | 2022 | | 2021 |
| Raw materials | Raw materials | $ | 23,530 | | | $ | 23,762 | | Raw materials | $ | 59,907 | | | $ | 23,530 | |
| Work in process | Work in process | 5,173 | | | 5,912 | | Work in process | 4,972 | | | 5,173 | |
| Finished goods and parts | Finished goods and parts | 64,184 | | | 86,993 | | Finished goods and parts | 72,953 | | | 64,184 | |
| Inventories | $ | 92,887 | | | $ | 116,667 | | |
| Total inventories | | Total inventories | $ | 137,832 | | | $ | 92,887 | |
We record a reserve to the carrying value of our inventory to reflect the rapid technological change in our industry that impacts the market for our products. The inventory reserve was $16,509$15,550 and $20,125$16,509 as of December 31, 20212022 and 2020,2021, respectively.
In the second quarter of 2022, we notified one of our contract manufacturers of our intent to terminate our manufacturing services arrangement and in-source the assembly and production process. The exit agreement was finalized in July 2022 and resulted in a $1,670 exit fee that we paid in third quarter of 2022, as well as the purchase of $23,913 of inventory and $369 of fixed assets from the assembly manufacturer in the third quarter of 2022. Part of the inventory purchased was prepaid during previous quarters for $8,892, resulting in a net payment of $17,060 in July 2022.
In June 2020, as part of our assessment of prospective sales and evaluation of inventory, we determined the end-of-life for certain product lines. The end-of-life determination for these products reflects management's plans to focus our resources that are better aligned with our new strategic focus, as further discussed in Note 25. As a result, for the year ended December 31, 2020, we recorded a charge ofof $10,894 to products costs of sales, primarily attributable to inventory, accessories and inventory commitments for these products. WeWe have ceased production for these items. There was no material product line life ended for yearduring the years ended December 31, 2022 or 2021.
(9) Property and Equipment
Property and equipment at December 31, 20212022 and 20202021 are summarized as follows:
| | (in thousands) | (in thousands) | | 2021 | | 2020 | | Useful Life (in years) | (in thousands) | | 2022 | | 2021 | | Useful Life (in years) |
| Land | | $ | — | | | $ | 541 | | | N/A | |
| Building | Building | | 84 | | | 5,422 | | | 25-30 | Building | | $ | 94 | | | $ | 84 | | | 25-30 |
| Machinery and equipment | Machinery and equipment | | 117,446 | | | 163,688 | | | 2-5 | Machinery and equipment | | 130,874 | | | 117,446 | | | 2-5 |
| Capitalized software | Capitalized software | | 24,149 | | | 24,814 | | | 3-5 | Capitalized software | | 25,952 | | | 24,149 | | | 3-5 |
| Office furniture and equipment | Office furniture and equipment | | 5,188 | | | 5,106 | | | 1-5 | Office furniture and equipment | | 5,540 | | | 5,188 | | | 1-5 |
| Leasehold improvements | Leasehold improvements | | 32,200 | | | 32,349 | | | Life of lease a | Leasehold improvements | | 34,567 | | | 32,200 | | | Life of lease a |
| Construction in progress | Construction in progress | | 12,051 | | | 4,910 | | | N/A | Construction in progress | | 9,175 | | | 12,051 | | | N/A |
| Total property and equipment | Total property and equipment | | 191,118 | | | 236,830 | | | Total property and equipment | | 206,202 | | | 191,118 | | |
| Less: Accumulated depreciation and amortization | Less: Accumulated depreciation and amortization | | (133,861) | | | (161,474) | | | Less: Accumulated depreciation and amortization | | (148,130) | | | (133,861) | | |
| Total property and equipment, net | Total property and equipment, net | | $ | 57,257 | | | $ | 75,356 | | | Total property and equipment, net | | $ | 58,072 | | | $ | 57,257 | | |
a.Leasehold improvements are amortized on a straight-line basis over the shorter of (i) their estimated useful life or (ii) the estimated or contractual life of the related lease.
We include all depreciation from assets attributable to the generation of revenue in the cost of sales line item inon the Statementstatements of Operations.operations. Depreciation related to assets that are not attributable to the generation of revenue areis included in the research and development and selling, general and general administrative expense line items inon the Statementstatements of Operations.operations. Depreciation on property and equipment is calculated on a straight-line basis. Depreciation expense on property and equipment for the years ended December 31, 2022, 2021 and 2020 was $21,096, $24,242 and 2019 was $24,242, $28,397, and $29,982, respectively.
For the years ended December 31, 2022, 2021 2020 and 2019,2020, we recognized impairment charges of $18, $788 $3,406 and $181,$3,406, respectively, on property and equipment, net included in the selling, general and general administrative expense line item inon the Statementstatements of Operations.operations.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
(10) Intangible Assets
Intangible assets net, other than goodwill, at December 31, 20212022 and 20202021 are summarized as follows:
| | | 2021 | | 2020 | | 2022 | | 2021 |
| (in thousands) | (in thousands) | Gross a | | Accumulated Amortization | | Net | | Gross a | | Accumulated Amortization | | Net | | Weighted Average Useful Life Remaining (in years) | (in thousands) | Gross | | Accumulated Amortization | | Net | | Gross | | Accumulated Amortization | | Net | | Weighted Average Useful Life Remaining (in years) |
| Intangible assets with finite lives: | Intangible assets with finite lives: | | | | | | | | | | | | | | Intangible assets with finite lives: | | | | | | | | | | | | | |
| Customer relationships | Customer relationships | $ | 53,062 | | | $ | (45,613) | | | $ | 7,449 | | | $ | 71,123 | | | $ | (56,682) | | | $ | 14,441 | | | 2.8 | Customer relationships | $ | 51,137 | | | $ | (48,695) | | | $ | 2,442 | | | $ | 53,062 | | | $ | (45,613) | | | $ | 7,449 | | | 3.7 |
| Acquired technology | Acquired technology | 17,518 | | | (5,430) | | | 12,088 | | | 42,472 | | | (41,201) | | | 1,271 | | | 5.2 | Acquired technology | 55,480 | | | (10,707) | | | 44,773 | | | 17,518 | | | (5,430) | | | 12,088 | | | 8.3 |
| Trade names | Trade names | 20,448 | | | (10,438) | | | 10,010 | | | 17,477 | | | (16,506) | | | 971 | | | 18.9 | Trade names | 35,930 | | | (12,455) | | | 23,475 | | | 20,448 | | | (10,438) | | | 10,010 | | | 9.3 |
| Patent costs | Patent costs | 21,852 | | | (11,812) | | | 10,040 | | | 19,828 | | | (10,999) | | | 8,829 | | | 10.5 | Patent costs | 18,673 | | | (10,909) | | | 7,764 | | | 21,852 | | | (11,812) | | | 10,040 | | | 9.5 |
| Trade secrets | Trade secrets | 19,924 | | | (18,971) | | | 953 | | | 20,188 | | | (18,216) | | | 1,972 | | | 1.1 | Trade secrets | 19,828 | | | (19,828) | | | — | | | 19,924 | | | (18,971) | | | 953 | | | — |
| Acquired patents | Acquired patents | 16,257 | | | (15,945) | | | 312 | | | 16,317 | | | (15,723) | | | 594 | | | 6.1 | Acquired patents | 17,499 | | | (15,661) | | | 1,838 | | | 16,257 | | | (15,945) | | | 312 | | | 12.7 |
| Other | Other | 12,982 | | | (7,999) | | | 4,983 | | | 19,793 | | | (19,788) | | | 5 | | | 9.4 | Other | 13,255 | | | (8,765) | | | 4,490 | | | 12,982 | | | (7,999) | | | 4,983 | | | 8.6 |
| Total intangible assets | Total intangible assets | $ | 162,043 | | | $ | (116,208) | | | $ | 45,835 | | | $ | 207,198 | | | $ | (179,115) | | | $ | 28,083 | | | 8.5 | Total intangible assets | $ | 211,802 | | | $ | (127,020) | | | $ | 84,782 | | | $ | 162,043 | | | $ | (116,208) | | | $ | 45,835 | | | 8.7 |
a.
Change in gross
The Company's total intangible assets reported on the balance sheet include an indefinite-life intangible asset related to dp polar IPR&D. The carrying amounts primarily due to divestituresvalue of Cimatron, Simbionixthe Company's indefinite-lived intangible assets was $5,448 and ODM partially offset by the acquisition$0 as of OqtonDecember 31, 2022 and foreign currency translation.2021, respectively.
Amortization expense related to intangible assets was $15,480, $10,469 $15,810 and $20,312$15,810 for the years ended December 31, 2022, 2021 and 2020, and 2019, respectively.
Annual amortization expense for intangible assets is expectedestimated to be $10,767 in 2022, $6,190$10,528 in 2023, $5,395$10,504 in 2024, $5,365$10,229 in 2025, $7,324 in 2026 and $4,415$6,843 in 2026.
(11) Goodwill
The following are the changes in the carrying amount of goodwill by reporting unit:
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| Year Ended December 31, 2021 |
| Healthcare | | Industrial | | Consolidated |
| (in thousands) | Gross Goodwill | | Dispositions, Acquisitions and Impairments | | Net Goodwill | | Gross Goodwill | | Dispositions, Acquisitions and Impairments | | Net Goodwill | | Gross Goodwill | | Dispositions, Acquisitions and Impairments | | Net Goodwill |
| | | | | | | | | | | | | | | | | |
| Balance at beginning of year | $101,767 | | $(32,055) | | $69,712 | | $134,382 | | $(42,329) | | $92,053 | | $236,149 | | $(74,384) | | $161,765 |
Acquisition (a) | — | | 39,182 | | 39,182 | | — | | 170,033 | | 170,033 | | — | | 209,215 | | 209,215 |
Dispositions (b) | — | | (15,598) | | (15,598) | | — | | (3,873) | | (3,873) | | — | | (19,471) | | (19,471) |
Adjustments (c) | (900) | | — | | (900) | | 900 | | — | | 900 | | — | | — | | — |
| Foreign currency translation adjustments | (2,481) | | — | | (2,481) | | (3,440) | | — | | (3,440) | | (5,921) | | — | | (5,921) |
| Total goodwill | $98,386 | | $(8,471) | | $89,915 | | $131,842 | | $123,831 | | $255,673 | | $230,228 | | $115,360 | | $345,588 |
| | | | | | | | | | | | | | | | | |
a.The 2021 acquisition, for the Healthcare and Industrial segments in the table above relate to Allevi, Additive Works, Oqton and Volumetric. Approximately $560 of goodwill related to Allevi will be deductible for tax purposes.
b.The 2021 dispositions for the Healthcare and Industrial segments in the table above relate to of ODM and Simbionix
c.The 2021Adjustment, for the Healthcare and Industrial segments in the table above relate to reclassification within the segments.
The following arereflects the changes in the carrying amount of goodwill by reporting unit for 2020. This presentation reflects the prior year reporting unit structure, which has been changed for 2021. Due to unnecessarily burdensome procedures to recast this information into our new segment structure, we have taken the practicability exception allowed and presented as in prior yearended December 31, 2022:
:
| | | | | | | | | | | | | | | | | | | | | | | | | | |
| (in thousands) | | Americas | | EMEA | | APAC | | Total |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| Balance at December 31, 2019 | | $ | — | | | $ | 186,695 | | | $ | 36,481 | | | $ | 223,176 | |
Dispositions and impairments a | | — | | | (69,685) | | | (4,699) | | | (74,384) | |
| Effect of foreign currency exchange rates | | — | | | 10,582 | | | 2,391 | | | 12,973 | |
| Balance at December 31, 2020 | | $ | — | | | $ | 127,592 | | | $ | 34,173 | | | $ | 161,765 | |
a.Includes $21,385 of goodwill held for sale related to Cimatron in EMEA and $4,699 of goodwill related to the sale of our Australia ODM and Wuxi Easyway businesses in APAC. See Note 4. | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| Year Ended December 31, 2022 |
| Healthcare | | Industrial | | Consolidated |
| (in thousands) | Gross Goodwill | | Impairments | | Net Goodwill | | Gross Goodwill | | Impairments | | Net Goodwill | | Gross Goodwill | | Impairments | | Net Goodwill |
| | | | | | | | | | | | | | | | | |
| Balance at beginning of year | $121,970 | | $(32,055) | | $89,915 | | $298,002 | | $(42,329) | | $255,673 | | $419,972 | | $(74,384) | | $345,588 |
| Acquisitions | 25,378 | | — | | 25,378 | | 23,433 | | — | | 23,433 | | 48,811 | | — | | 48,811 |
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | |
| Foreign currency translation adjustments | (3,917) | | — | | (3,917) | | (5,170) | | — | | (5,170) | | (9,087) | | — | | (9,087) |
| Balance at end of year | $143,431 | | $(32,055) | | $111,376 | | $316,265 | | $(42,329) | | $273,936 | | $459,696 | | $(74,384) | | $385,312 |
| | | | | | | | | | | | | | | | | |
The effect of foreign currency exchange in the table above tables reflectreflects the impact on goodwill of amounts recorded in currencies other than the U.S. dollar on the financial statements of foreign subsidiaries in these geographic areasand the resulting from the yearly effect of foreign currency translation between the applicable functional currency and the U.S. dollar.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Our reporting units are Healthcare Solutions and Industrial.Industrial Solutions. We completed the required annual goodwill impairment testtests as of November 30, 2022 and 2021. The goodwill impairment testtests compared the fair value of each reporting unit to theirits carrying value. We estimated the fair value of our reporting units based primarily on projections of future revenues, expenses, and cash flows discounted to itstheir present value, and a market approach. The valuation methodology and underlying financial information included in the Company's determination of fair value required significant judgment by management. The principal assumptions used in the Company's discounted cash flow analysis consisted of (a) the long-term projections of future financial performance and (b) the weighted-average cost of capital of market participants, adjusted for the risk attributable to the Company and the industry in which it operates. Under the market approach, the principal assumptionassumptions included an estimateestimates of multiples for various financial metrics of comparable companies. The estimated fair value for each of our reporting units was in excess of their respective carrying values as of November 30, 2022 and 2021.
Goodwill Impairment Prior to Change in Segments
Prior to identifying Healthcare Solutions and Industrial Solutions as the Company's reportable segments, which took effect as of January 1, 2021, the reporting units at which goodwill was tested for impairment were based upon geographic regions. As of September 30, 2020, we experienced a goodwill valuation triggering event due to a drop in our stock price, which was negatively impacted by the business environment as a result of the COVID-19 pandemic. Accordingly, we performed a quantitative analysis for potential impairment of our goodwill and long-lived asset balances. Based on available information and analysis as of September 30, 2020, we determined the carrying value of the EMEA reporting unit exceeded its fair value and recorded a non-cash goodwill impairment charge of $48,300. We also determined that, as of September 30, 2020, the fair valuevalues of the Americas and APAC reporting units exceeded their carrying values, and the carrying valuevalues of our long-lived assets iswere recoverable for all reporting units.
(12) Employee Benefits
We sponsor a Section 401(k) plan (the “Plan”) covering substantially all of our eligible U.S. employees. The Plan entitles eligible employees to make contributions to the Plan after meeting certain eligibility requirements. Contributions are limited to the maximum contribution allowances permitted under the Internal Revenue Code. We match 50.0% of contributions on the first 6.0% of the participant’s eligible compensation.
For the years ended December 31, 2022, 2021 2020 and 2019,2020, we expensed $2,254, $2,039 $2,456 and $2,688,$2,456, respectively, for matching contributions related to the defined contribution plan.
International Retirement Plan
We sponsor a non-contributory defined benefit pension plan for certain employees of a non-U.S. subsidiary initiated by a predecessor of the subsidiary. We maintain insurance contracts that provide an annuity that is used to fund the current obligations under this plan. The following table provides a reconciliation of the changes in the projected benefit obligation for the years ended December 31, 20212022 and 2020:
| | | | | | | | | | | | | | |
| (in thousands) | | 2021 | | 2020 |
| Reconciliation of benefit obligations: | | | | |
| Obligations as of January 1 | | $ | 10,391 | | | $ | 10,497 | |
| Service cost | | 187 | | | 204 | |
| Interest cost | | 130 | | | 84 | |
| Actuarial loss (gain) | | (234) | | | (1,222) | |
| Benefit payments | | (627) | | | (151) | |
| Effect of foreign currency exchange rate changes | | (773) | | | 979 | |
| Benefit obligations as of December 31 | | 9,074 | | | 10,391 | |
Fair value of assets as of December 31 a | | 3,577 | | | 3,844 | |
| Funded status as of December 31, net of tax benefit | | $ | (5,497) | | | $ | (6,547) | |
a.
| | | | | | | | | | | | | | |
| (in thousands) | | 2022 | | 2021 |
| Reconciliation of benefit obligation: | | | | |
| Obligation as of January 1 | | $ | 9,074 | | | $ | 10,391 | |
| Service cost | | 103 | | | 187 | |
| Interest cost | | 99 | | | 130 | |
| Actuarial (gain) loss | | (3,387) | | | (234) | |
| Benefit payments | | (162) | | | (627) | |
| Effect of foreign currency exchange rate changes | | (512) | | | (773) | |
| Benefit obligation as of December 31 | | 5,215 | | | 9,074 | |
| Fair value of assets as of December 31 | | 3,463 | | | 3,577 | |
| Funded status as of December 31 | | $ | (1,752) | | | $ | (5,497) | |
No change in underlying asset value for the periods.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
We recognized the following amounts in the consolidated balance sheets at December 31, 20212022 and 2020:2021:
| | (in thousands) | (in thousands) | | 2021 | | 2020 | (in thousands) | | 2022 | | 2021 |
| Other assets | Other assets | | $ | 3,577 | | | $ | 3,844 | | Other assets | | $ | 3,463 | | | $ | 3,577 | |
| Accrued liabilities | | (163) | | | (163) | | |
| Accrued and other liabilities | | Accrued and other liabilities | | (165) | | | (163) | |
| Other liabilities | Other liabilities | | (8,911) | | | (10,228) | | Other liabilities | | (5,050) | | | (8,911) | |
| Net liability | Net liability | | $ | (5,497) | | | $ | (6,547) | | Net liability | | $ | (1,752) | | | $ | (5,497) | |
The followingFollowing are the projected benefit obligation and accumulated benefit obligation were estimated as ofat December 31, 20212022 and 2020:2021: | | (in thousands) | (in thousands) | | 2021 | | 2020 | (in thousands) | | 2022 | | 2021 |
| Projected benefit obligation | Projected benefit obligation | | $ | 9,074 | | | $ | 10,391 | | Projected benefit obligation | | $ | 5,215 | | | $ | 9,074 | |
| Accumulated benefit obligation | Accumulated benefit obligation | | $ | 8,635 | | | $ | 9,343 | | Accumulated benefit obligation | | $ | 4,984 | | | $ | 8,635 | |
The following table shows the components of net periodic benefit costs and the amounts recognized in “Accumulatedaccumulated other comprehensive income (loss)” as of for the years ended December 31, 2022, 2021 2020 and 2019:2020:
| | (in thousands) | (in thousands) | | 2021 | | 2020 | | 2019 | (in thousands) | | 2022 | | 2021 | | 2020 |
| Net periodic benefit cost: | Net periodic benefit cost: | | | | | | | Net periodic benefit cost: | | | | | | |
| Service cost | Service cost | | $ | 187 | | | $ | 204 | | | $ | 166 | | Service cost | | $ | 103 | | | $ | 187 | | | $ | 204 | |
| Interest cost | Interest cost | | 130 | | | 84 | | | 151 | | Interest cost | | 99 | | | 130 | | | 84 | |
| Amortization of actuarial loss | Amortization of actuarial loss | | 259 | | | 351 | | | 200 | | Amortization of actuarial loss | | 45 | | | 259 | | | 351 | |
| Total net periodic pension cost | Total net periodic pension cost | | 576 | | | 639 | | | 517 | | Total net periodic pension cost | | 247 | | | 576 | | | 639 | |
| Other changes in plan assets and benefit obligations recognized in other comprehensive income: | | |
| Other changes in plan assets and benefit obligations recognized in other comprehensive income (loss): | | Other changes in plan assets and benefit obligations recognized in other comprehensive income (loss): | |
| Net (gain) loss | Net (gain) loss | | (234) | | | (1,223) | | | 1,815 | | Net (gain) loss | | (3,387) | | | (234) | | | (1,223) | |
| Amortization of prior years' unrecognized loss | Amortization of prior years' unrecognized loss | | (259) | | | (351) | | | (200) | | Amortization of prior years' unrecognized loss | | (45) | | | (259) | | | (351) | |
| Total recognized as accumulated other comprehensive income (loss), excluding tax | | (493) | | | (1,574) | | | 1,615 | | |
| Total expense recognized in net periodic benefit cost and other comprehensive income | | $ | 83 | | | $ | (935) | | | $ | 2,132 | | |
| Total recognized as other comprehensive income (loss), excluding tax | | Total recognized as other comprehensive income (loss), excluding tax | | (3,432) | | | (493) | | | (1,574) | |
| Total (gain) expense recognized in net periodic benefit cost and other comprehensive income (loss) | | Total (gain) expense recognized in net periodic benefit cost and other comprehensive income (loss) | | $ | (3,185) | | | $ | 83 | | | $ | (935) | |
The following assumptions are used to determine the benefit obligations as of December 31, 20212022 and 2020:2021:
| | | 2021 | | 2020 | | 2022 | | 2021 |
| Discount rate | Discount rate | | 1.2% | | 1.3% | Discount rate | | 4.2% | | 1.2% |
| Rate of compensation | Rate of compensation | | 3.0% | | 3.0% | Rate of compensation | | 3.0% | | 3.0% |
The following benefit payments, including expected future service cost, are expected to be paid:
| | (in thousands) | (in thousands) | | (in thousands) | |
| Estimated future benefit payments: | | |
| 2022 | $ | 175 | | |
| Estimated future benefit payments for the years ending December 31: | | Estimated future benefit payments for the years ending December 31: | |
| 2023 | 2023 | 181 | | 2023 | $ | 174 | |
| 2024 | 2024 | 185 | | 2024 | $ | 176 | |
| 2025 | 2025 | 187 | | 2025 | $ | 177 | |
| 2026 | 2026 | 189 | | 2026 | $ | 208 | |
| 2027 through 2031 | $ | 1,439 | | |
| 2027 | | 2027 | $ | 234 | |
| 2028 through 2032 | | 2028 through 2032 | $ | 1,578 | |
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
(13) Accrued and Other Liabilities
Accrued and other liabilities at December 31, 20212022 and 20202021 are summarized as follows:
| | (in thousands) | (in thousands) | 2021 | | 2020 | (in thousands) | 2022 | | 2021 |
| Compensation and benefits | Compensation and benefits | $ | 39,846 | | | $ | 24,629 | | Compensation and benefits | $ | 19,814 | | | $ | 39,846 | |
| Accrued taxes | Accrued taxes | 19,836 | | | 14,952 | | Accrued taxes | 10,694 | | | 19,836 | |
| Vendor accruals | Vendor accruals | 9,045 | | | 18,762 | | Vendor accruals | 6,920 | | | 9,045 | |
| Legal contingencies | | Legal contingencies | 9,948 | | | — | |
| Product warranty liability | Product warranty liability | 3,585 | | | 2,348 | | Product warranty liability | 3,677 | | | 3,585 | |
| Accrued professional fees | Accrued professional fees | 2,263 | | | 1,773 | | Accrued professional fees | 2,405 | | | 2,263 | |
| Accrued other | Accrued other | 1,593 | | | 6,138 | | Accrued other | 1,488 | | | 1,593 | |
| Royalties payable | Royalties payable | 826 | | | 1,210 | | Royalties payable | 625 | | | 826 | |
| Total | Total | $ | 76,994 | | | $ | 69,812 | | Total | $ | 55,571 | | | $ | 76,994 | |
Other liabilities at December 31, 20212022 and 20202021 are summarized as follows:
| | | | | | | | | | | |
| (in thousands) | 2021 | | 2020 |
| Long term employee indemnity | $ | 5,237 | | | $ | 12,228 | |
| Long term tax liability | 6,099 | | | 15,532 | |
| Defined benefit pension obligation | 8,911 | | | 10,228 | |
| Long term deferred revenue | 10,244 | | | 6,163 | |
| Other long term liabilities | 1,763 | | | 7,096 | |
| Total | $ | 32,254 | | | $ | 51,247 | |
| | | | | | | | | | | |
| (in thousands) | 2022 | | 2021 |
| Long-term employee indemnity | $ | 4,817 | | | $ | 5,237 | |
| Long-term tax liability | 5,711 | | | 6,099 | |
| Defined benefit pension obligation | 5,050 | | | 8,911 | |
| Long-term deferred revenue | 4,974 | | | 10,244 | |
| Earnout liability | 17,244 | | | 1,327 | |
| Legal contingencies | 6,096 | | | — | |
| Other long-term liabilities | 289 | | | 436 | |
| Total | $ | 44,181 | | | $ | 32,254 | |
Changes in the product warranty obligations, including deferred revenue on extended warranty contracts,obligation for the years ended December 31, 2022, 2021 2020 and 2019,2020 are summarized below:
| | | | | | | | | | | | | | | | | | | | | | | | | | |
| (in thousands) | | Beginning Balance | | Additional Accrual/ Revenue Deferred | | Costs Incurred/ Deferred Revenue Amortization | | Ending Balance |
| Year Ended December 31, | | | | | | | | |
| 2021 | | $ | 6,380 | | | $ | 8,670 | | | $ | (8,784) | | | $ | 6,266 | |
| 2020 | | 6,192 | | | 6,454 | | | (6,266) | | | 6,380 | |
| 2019 | | $ | 7,660 | | | $ | 8,124 | | | $ | (9,592) | | | $ | 6,192 | |
| | | | | | | | | | | | | | | | | | | | | | | | | | |
| (in thousands) | | Beginning Balance | | Settlements made | | Accruals for warranties issued | | Ending Balance |
| Year ended December 31, | | | | | | | | |
| 2022 | | $ | 3,585 | | | $ | (5,961) | | | $ | 6,053 | | | $ | 3,677 | |
| 2021 | | $ | 2,348 | | | $ | (7,547) | | | $ | 8,784 | | | $ | 3,585 | |
| 2020 | | $ | 2,908 | | | $ | (6,826) | | | $ | 6,266 | | | $ | 2,348 | |
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
(14) Borrowings
Convertible Notes
On November 16, 2021, the Company issued $460,000 in aggregate principal amount of its 0% Convertible Senior Notes due November 15, 2026 (the “Notes”), pursuant to an Indenture dated November 16, 2021 (the “Indenture”), between the Company and The Bank of New York Mellon, N.A., as trustee. The net proceeds from the offering of the Notes were $446,534 after deducting the initial purchasers’ discounts and commissions and offering expenses payable by the Company in the amount of $13,466, forof which $13,141$10,490 is unamortized at December 31, 2021.2022. The annual effective interest rate of the Notes is 0.594% when including purchasers' discounts and commissions and offering expenses incurred by the Company. The Notes are senior, unsecured obligations of the Company, will not bear regular interest, and the principal amount of the Notes will not accrete. The Notes will mature on November 15, 2026, unless earlier redeemed, repurchased or converted in accordance with the terms of the Notes. their terms.The Notes will be convertible at the option of the holders at any time prior to the close of business on the business day immediately preceding August 15, 2026, only under the following circumstances: (1) during any calendar quarter commencing after the calendar quarter ending on March 31, 2022 (and only during such quarter), if the last reported sale price of the Company’s common stock, par value $0.001 per share (the “Common Stock”), is equal to or greater than or equal to 130% of the conversion price for each of at least 20 trading days (whether or not consecutive) during a period of 30 consecutive trading days ending on, and including, the last trading day of the immediately preceding calendar quarter on each applicable trading day; (2) during the 5five business day period after any 5five consecutive trading day period (the “measurement period”) in which the trading price (as defined in the Indenture) per $1 principal amount of Notes for each trading day of the measurement period was less than 98% of the product of the last reported sale price per share of the Common Stock and the conversion rate on each such trading day; (3) if the Company calls such Notes for redemption at any time prior to the close of business on the second scheduled trading day immediately preceding the redemption date; and (4) upon the occurrence of specified corporate events, including a Fundamental Change (as defined in the Indenture), or distributions of the Common Stock. On or after August 15, 2026, until the close of business on the second scheduled trading day immediately preceding the maturity date, holders may convert all or any portion of their Notes at any time, at the option of the holder, regardless of the foregoing circumstances. Upon conversion, the Company will pay cash up to the aggregate principal amount of the Notes to be converted and pay or deliver, as the case may be, cash, shares of the Common Stock, or a combination of cash and shares of the Common Stock, at the Company’s election, in respect of the remainder, if any, of the Company’s conversion obligation in excess of the aggregate principal amount of the Notes being converted. The Notes have an initial conversion rate of 27.8364 shares of Common Stock per $1 principal amount of Notes (which is subject to adjustment in certain circumstances). This is equivalent to an initial conversion price of approximately $35.92 per share. The conversion rate is subject to customary adjustments under certain circumstances in accordance with the terms of the Indenture. Holders of the Notes have the right to require the Company to repurchase for cash all or a portion of their Notes at 100% of their principal amount, plus any accrued and unpaid special interest, upon the occurrence of a Fundamental Change. The Company is also required to increase the conversion rate for holders who convert their Notes in connection with a Fundamental Change or convert their Notes that are called for redemption, as the case may be, prior to the maturity date. The Company may not redeem the Notes prior to November 20, 2024. The Notes are redeemable, in whole or in part, for cash at the Company’s option at any time, and from time to time, on or after November 20, 2024 and before the 41st scheduled trading day immediately preceding the maturity date, but only if the last reported sale price per share of the Common Stock has been at least 130% of the conversion price then in effect for a specified period of time. The Notes are the Company’s senior unsecured obligations and will rank senior in right of payment to any of the Company’s existing and future indebtedness that is expressly subordinated in right of payment to the Notes; rank equal in right of payment to any of the Company’s future unsecured indebtedness that is not so subordinated; be effectively subordinated in right of payment to any of the Company’s existing and future secured indebtedness to the extent of the value of the collateral securing such indebtedness; and structurally subordinated to all existing and future indebtedness and other liabilities (including trade payables) of current or future subsidiaries of the Company. The Indenture also contains covenants, events of default and other provisions which are customary for offerings of convertible notes. We are in compliance with all covenants. At the December 31, 20212022, the fair value of the Notes is $436,600.$315,592. This is based on the quoted market price where the volume of activity is limited and not active and, thus, this is deemed a levelLevel 2 fair value measurement.
The Company incurred $324$2,652 of debt issuance cost amortization inaccretion for the twelve months ended December 31, 2022 and $324 for the period between the date of the Notes issuance and December 31, 2021. Debt issuance cost accretion of $2,663, $2,679 $2,695, $2,711,$2,683, $2,698, $2,714, and $2,394 are$2,395 is expected to be incurred in 2022, 2023, 2024, 2025 and 2026, respectively.
Credit Facility
We had a 5-year $100,000 senior secured revolving credit facility (the “Senior Credit Facility”) to support working capital and general corporate purposes. Effective August 24, 2021, we terminated this 5-year $100,000 Senior Credit Facility. The Senior Credit Facility also included a 5-year $100,000 senior secured term loan facility (the “Term Facility”) that was fully repaid and terminated in the first quarter of 2021, as discussed below. Effective August 24, 2021, we terminated the 5-year $100,000 Senior Credit Facility. The Senior Credit Facility contained customary covenants, some of which required us to maintain certain financial ratios that determine the amounts available and terms of borrowings and events of default. We were in compliance with all covenants through the date of termination.
Borrowings under the Senior Credit Facility were subject to interest at varying spreads above quoted market rates and a commitment fee was paid on the total unused commitment. The interest rate at December 31, 2020 was 1.9%. We had a balance of $21,392 outstanding on the Term Facility at December 31, 2020. On January 1, 2021, the Company completed the sale of Cimatron. A portion of the proceeds from the sale were used to repay the outstanding balance on the Term Facility. The Term Facility was fully repaid and terminated in the first quarter of 2021. Concurrent with the repayment of the Term Facility, we terminated the related interest rate swap, resulting in a marked-to-market payment of $721.swap. See Note 15 for additional information.
InterestIncome andExpense
Interest income totaled $438, $400 and $1,209 for the years ended December 31, 2021, 2020 and 2019, respectively.
Interest expense totaled $2,340, $4,391 and $4,442 for the years ended December 31, 2021, 2020 and 2019, respectively.
(15) Hedging Activities and Financial Instruments
Derivatives Designated as Hedging Instruments
On July 8, 2019, we entered into a $50,000 interest rate swap contract, designated as a cash flow hedge, to minimize the risk associated with the variability of cash flows inrelated to interest payments from variable-rate debt due to fluctuations in the one-month USD-LIBOR, subject to a 0% floor, through February 26, 2024. Changes in the interest rate swap arewere expected to offset the changes in cash flows attributable to fluctuations ofin the one-month USD-LIBOR forrate upon which the interest payments associated with our Term Facility.
Facility were based prior to repayment.
On June 30, 2020, we executed an amendment to the swap which reduced the notional amount to $15,000 and resulted in de-designation as a cash flow hedge. The reduction required a mark-to-market settlement of $1,253 paid in July 2020. Amounts previously recognized in Accumulated Other Comprehensive Loss ("AOCL") of $1,235 were released and reclassified into Interest and other expense, net on the accompanying consolidated statements of operations and comprehensive loss for the year ended December 31, 2020. Subsequent to June 2020, changes in the swap’s fair value arewere recognized currently in earnings and included in the Interestinterest and other expense,income (expense), net. The remaining $721 in AOCL as of December 31, 2020 was expensed to Interest and other expense, net in 2021 when the Company terminated this agreementcontract in connection with repayment of the Term Facility. See Note 14 for additional information.
We had no exposure to LIBOR rates as ofDuring the years ended December 31, 2021. The notional amount2022, 2021 and fair value2020, we recognized losses of the historical derivative$0, $711, and $1,513, respectively, on interest rate swap contracts. There were no derivatives designated as hedging instruments on our balance sheetsheets at December 31, 20212022 and 2020 are disclosed below:
| | | | | | | | | | | |
| (in thousands) | Balance Sheet location | Notional amount | Fair value |
| December 31, 2021 | | | |
| Interest rate swap contract | Other liabilities | $ | — | | $ | — | |
| December 31, 2020 | | | |
| Interest rate swap contract | Other liabilities | $ | 15,000 | | $ | (700) | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
Derivatives Not Designated as Hedging Instruments
We conduct business in various countries using both the functional currencies of those countries and other currencies to effect cross bordercross-border transactions. As a result, we are subject to the risk that fluctuations in foreign currency exchange rates between the dates that thosenon-functional currency transactions are entered into and their respective settlement dates will result in a foreign currency exchange gain or loss. When practicable, we endeavor to match assets and liabilities in the same currency on our balance sheet and those of our subsidiaries in order to reduce these risks. When appropriate, we enter into foreign currency exchange contracts to hedge exposures arising from thoseforeign currency transactions. We have elected not to prepare and maintain the documentation required to qualify for hedge accounting treatment under ASC 815, “Derivatives“Derivatives and Hedging” and, therefore, all gains and losses (realized or unrealized) on our foreign currency contracts are recognized in Interestinterest and other expense,income (expense), net inon the consolidated statements of operations and comprehensive loss.operations. Depending on their fair value at the end of the reporting period, derivatives are recorded either in prepaid expenses and other current assets or in accrued and other liabilities on the consolidated balance sheet.sheets.
We had $43,000$0 and $101,781$43,000 in notional foreign currency exchange contracts outstanding as of December 31, 20212022 and 2020,2021, respectively. The fair values of these contracts were not material.
We translateDuring the years ended December 31, 2022, 2021 and 2020, we recognized losses (gain) related to foreign currency balance sheets for each non-U.S. subsidiary's functional currency (generally the respective local currency) to U.S. dollars at end-of-period exchange rateshedging activities of $2,322, $335, and statements of earnings at average exchange rates for each period. The resulting foreign currency translation adjustments are a component of other comprehensive income (loss). We do not hedge the fluctuation in reported revenue and earnings resulting from the translation of these international operations' results into U.S. dollars.$(608), respectively.
(16) Inventory Financing AgreementsInterest income (expense)
| | | | | | | | | | | | | | | | | | | | |
| | Year Ended December 31, |
| (in thousands) | | 2022 | | 2021 | | 2020 |
| Interest and other income (expense), net | | | | | | |
| Foreign exchange (loss) gain, net | | $ | (4,424) | | | $ | 1,681 | | | $ | (4,762) | |
| Interest income (expense), net | | 6,541 | | | (1,902) | | | (3,991) | |
| Other (expense) income, net | | (5,907) | | | 352,830 | | | (15,694) | |
| Total interest and other (expense) income, net | | $ | (3,790) | | | $ | 352,609 | | | $ | (24,447) | |
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Interest income (expense), net includes (1) interest income of $9,352, $438, and $400 for the years ended December 1, 201831, 2022, 2021, and January 17, 2020, we entered into a Manufacturing Services Agreementrespectively, and Amendment One to Manufacturing Services Agreement (together,(2) interest expense of $2,811, $2,340, and $4,391 for the "Agreement")years ended December 31, 2022, 2021, and 2020, respectively. Other income (expense), with an assembling manufacturer to produce products on behalf of 3D Systems Corporation. Duringnet for the quarteryear ended March 31, 2020, as part of the Agreement, we sold $12,100 of inventory to the assembling manufacturer that we have an obligation to repurchase. At December 31, 2021 our obligation to repurchase inventory, included in Accruedincludes $350,853 of gains on the sales of ODM, Simbionix and other liabilities on our consolidated balance sheets, was $2,826, relating to the initial sale of inventory to the assembly manufacturer and adjustedCimatron. See Note 4 for transactions. The inventory sold consisted of raw materials, packaging materials and consumables representing stock on hand related to certain product families for which the manufacturing has been outsourced to the assembling manufacturer. Although the assembling manufacturer holds legal title, we account for the inventory similar to a product financing arrangement; therefore, the inventories sold to the assembling manufacturer will continue to be included in Inventories on our consolidated balance sheets until processed into finished goods and sold back to us. At December 31, 2021, inventory held at assemblers was $26.
Additionally, as part of the Agreement, we have a commitment to purchase certain materials and supplies that the assembling manufacturer purchased from third parties. At December 31, 2021, we had a commitment of $5,187 with the assembling manufacturer.
(17) Common Stock and Preferred Stock
WeCommon Stock
The Company is authorized to issue 220,000 shares of common stock. The holders of the common stock are entitled to one vote for each share held at all meetings of stockholders (and written actions in lieu of meetings).
Dividends may be declared and paid on common stock from funds lawfully available as and when determined by the Board of Directors and subject to any preferential dividend rights of any then outstanding preferred stock. Through the year ended December 31, 2022, no dividends had been declared.
Preferred Stock
The Company is authorized to issue 5,000 shares of preferred stock, that were authorized butall of which remained unissued at December 31, 20212022 and 2020.
(18) Stock-Based Compensation
The Company maintains the 2004 Restricted Stock Plan, as amended, for Non-Employee Directors and the 2015 Incentive Plan of 3D Systems Corporation.Plan. The 2015 Incentive Plan was amended and restated in May 20202022 to, among other things, increase the number of shares reserved for issuance by 4,8606,935 shares (as amended and restated, the “2015 Plan”). The total number of shares of common stock reserved and available for distribution under the 2015 Plan and the total number of shares of common stock that can be issued pursuant to stock options is 25,235 shares.
The 2015 Plan authorizes the granting of shares of restricted stock, RSUs,restricted stock units ("RSUs"), stock appreciation rights, cash incentive awards and the grant of options to purchase shares of our common stock. The 2015 Plan also designates measures that may be used for performance awards and market-based awards. The Director Plan authorizes the granting of shares of restricted stock forto our non-employee directors.
The vesting period for awards under the Stock Plansstock plans is generally determined by the Board of Directors at the date of the grant, and generally the awards vest one third each year, over 3 years.
Stock-based compensation expense is included in selling, general and administrative expenses in the consolidated statements of operations and comprehensive income (loss). operations.
The following table detailsshows the components of stock-based compensation expense recognized in net earnings in each ofduring the past three years:years ended December 31, 2022, 2021, and 2020:
| | | Year Ended December 31, | | | | | | | | | | | | | | | | | |
| (in thousands) | (in thousands) | | 2021 | | 2020 | | 2019 | (in thousands) | | 2022 | | 2021 | | 2020 |
| Total stock-based compensation expense | | $ | 55,153 | | | $ | 17,725 | | | $ | 23,587 | | |
| Stock-based compensation expense | | Stock-based compensation expense | | $ | 42,415 | | | $ | 55,153 | | | $ | 17,725 | |
| Tax benefit | | Tax benefit | | $ | — | | | $ | — | | | $ | — | |
Included in the above expenses for the years ended December 31, 2022, 2021, 2020 are $4,030, $22,057, and $0 of expense, for 2021 is $22,057respectively, pertaining to the annual incentive compensation awards that will bewhich is paid in companyCompany shares of which a $1,914 liability was reduced and recorded as part of the divestiture gains. Additionally,common stock. Also, included in the above expenses for the years ended December 31, 2022, 2021, and 2020 are $7,959, $683, and $0, respectively, of expense includes $683 related to the Volumetric contingent milestone payments asearnout arrangement discussed in Note 3. Finally, the above expenses for the years ended December 31, 2022, 2021 and 2020 include $268, $0 and $0, respectively, of expense related to the dp polar earnout arrangement discussed in Note 3.
Restricted Stock and Restricted Stock Units
We determine the fair value of restricted stock and RSUs based on the closing price of our stock on the date of grant. We generally recognize compensation expense related to restricted stock and RSUs on a straight-line basis over the vesting period. Forfeitures are recognized in the period in which they occur. A summary of our restricted stock and RSU activity for the year ended December 31, 20212022 is as follows:
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
| | (in thousands, except per share amounts) | (in thousands, except per share amounts) | | Number of Shares/Units | | Weighted Average Grant Date Fair Value | (in thousands, except per share amounts) | | Number of Shares/Units | | Weighted Average Grant Date Fair Value |
| Outstanding at beginning of year — unvested | Outstanding at beginning of year — unvested | | 3,540 | | | $ | 8.81 | | Outstanding at beginning of year — unvested | | 3,980 | | | $ | 19.72 | |
| Granted | Granted | | 2,547 | | | 29.30 | | Granted | | 4,422 | | | $ | 15.23 | |
| Canceled | Canceled | | (462) | | | 18.17 | | Canceled | | (700) | | | $ | 16.90 | |
| Vested | Vested | | (1,645) | | | 11.68 | | Vested | | (2,687) | | | $ | 15.92 | |
| Outstanding at end of year — unvested | Outstanding at end of year — unvested | | 3,980 | | | $ | 19.72 | | Outstanding at end of year — unvested | | 5,015 | | | $ | 18.19 | |
Included in the above outstanding balance aboveas of December 31, 2022 are 606834 shares of restricted stock that vest under specified market conditions and 7471,215 shares of restricted stock that vest under specified Company performance measures. Awards with specified market conditions were awarded to certain employees in 2016, 20202022, 2021, and 2021. The fair value for awards with market conditions is determined using a binomial lattice Monte Carlo simulation model and is expensed ratably over any implicit or explicit service period regardless if the market condition is probable of achievement or not. Stock compensation expense is not reversed if the market condition is not met. We recognize forfeitures when they occur. The fair value of performance-based awards are recognized on the grant date and expensed ratably over any implicit or explicit service period when the performance condition is deemed probable of achievement. Stock compensation recorded for performance shares is reversed when the performance condition is no longer deemed probable of achievement.2020.
Some RSUsIncluded in the above granted and vested activity for the year ended December 31, 2022 are 1,286 shares of stock related to the Company's annual incentive plan that were granted with a performance measure derived from non-GAAP-based management targets or based on non-financial metrics. Depending on our performance with respect to these metrics,under the number2015 Plan in lieu of RSUs earned may be less than, equal to or greater thancash and immediately vested in the original numberfirst quarter of RSUs awarded, subject to a payout range.2022.
On December 1, 2021, we issued Performance Share Units (PSUs) to employees of Volumetric as part of the acquisition agreement. Vesting of these shares is based on 4four non-financial milestones that involve various medical achievements. These awards were divided into 4four tranches, 1one tranche per milestone, and compensation expense is recognized only when a milestone is probable of achievement. During the year ended December 31, 2022, an additional 213 PSUs with corresponding milestones were issued to employees. As of December 31, 2022 and 2021, 1one of the 4four milestones was deemed probable of achievement and, accordingly, the company recorded $81 ofrecognized expense in 2021 related to these awards.awards of $1,031 and $81 for the years ended December 31, 2022 and 2021, respectively.
At December 31, 2021,2022, there was $60,612$46,601 of unrecognized stock-based compensation expense related to all non-vestedunvested restricted stock award shares and units,RSUs, which we expect to recognize over a weighted-average period of 2.81.9 years.
Stock Options
During the year ended December 31, 2016, we awarded certain employees market condition stock options under the 2015 Plan included in the activity above, that vest under specified market conditions. Each employee was generally awarded 2two equal tranches of market condition stock options that immediately vest when our common stock trades at either $30 or $40 per share for ninety consecutive calendar days.
We recognize compensation expense related to stock options on a straight-line basis over the derived term of the awards. Forfeitures are recognized in the period in which they occur. The fair value of stock options with market conditions is estimated using a binomial lattice Monte Carlo simulation model. Expense for awards with a market condition areis not reversed if the market condition is not met.
Stock option activity for the year ended December 31, 20212022 was as follows:
| | | Year Ended December 31, 2021 | | Year Ended December 31, 2022 |
| (in thousands, except per share amounts) | (in thousands, except per share amounts) | | Number of Shares | | Weighted Average Exercise | | Weighted Average Remaining Contractual Term (in years) | | Aggregate Intrinsic Value (in thousands) | (in thousands, except per share amounts) | | Number of Shares | | Weighted Average Exercise | | Weighted Average Remaining Contractual Term (in years) | | Aggregate Intrinsic Value |
| Stock option activity: | Stock option activity: | | | | | | | | | Stock option activity: | | | | | | | | |
| Outstanding at beginning of year | Outstanding at beginning of year | | 420 | | | $ | 13.26 | | | 5.7 | | $ | — | | Outstanding at beginning of year | | 420 | | | $ | 13.26 | | | 4.7 | | $ | 3,479 | |
| Granted | Granted | | — | | | — | | | — | | | — | | Granted | | — | | | — | | | — | | | — | |
| Exercised | Exercised | | — | | | — | | | — | | | — | | Exercised | | — | | | — | | | — | | | — | |
| Forfeited and expired | Forfeited and expired | | — | | | — | | | — | | | — | | Forfeited and expired | | — | | | — | | | — | | | — | |
| Outstanding at end of year | Outstanding at end of year | | 420 | | | $ | 13.26 | | | 4.7 | | $ | 3,479 | | Outstanding at end of year | | 420 | | | $ | 13.26 | | | 3.7 | | $ | — | |
In the table above, intrinsic value is calculated as the excess, if any, between the market priceAs of our stock on the last trading dayDecember 31, 2022 and 2021, none of the year420 outstanding stock options were exercisable, and the exercise price of the options.
At December 31, 2021, there was no unrecognized pre-tax stock-based compensation expense related to stock options.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
(19) Net Income (Loss) Per Share
We compute basic earningsBasic net income (loss) per share usingis calculated by dividing net income (loss) attributable to 3D Systems Corporation andSystems' common stock shareholders by the weighted average number of common shares outstanding during the applicable period. Diluted earningsnet income (loss) per share incorporates the additional shares issuable upon the assumed exercise of stock options, and the assumed vesting of restricted stock and RSUs,restricted stock units, and the assumed conversion of debt, except in such case when their(1) the inclusion of such shares or potential shares would be anti-dilutive.anti-dilutive or (2) when the vesting of restricted stock or restricted stock units is contingent upon one or more performance conditions that have not been met as of the balance sheet date.
| | | | | | | | | | | | | | | | | |
| Year Ended December 31, |
| (in thousands, except per share amounts) | 2021 | | 2020 | | 2019 |
| Numerator for basic and diluted net earnings (loss) per share: | | | | | |
| Net income (loss) attributable to 3D Systems Corporation | $ | 322,052 | | | $ | (149,594) | | | $ | (69,880) | |
| | | | | |
| Denominator for net earnings (loss) per share: | | | | | |
| Weighted average shares - basic | 122,867 | | | 117,579 | | | 113,811 | |
Dilutive effect of shares issuable under stock based compensation and other plans(1) | 3,467 | | | — | | | — | |
| Weighted average shares - diluted | 126,334 | | | 117,579 | | | 113,811 | |
Anti-dilutive shares of restricted share awards which are excluded from the dilutive shares above(2) | 1,779 | | | 3,960 | | | 5,822 | |
| | | | | |
| Net income (loss) per share - basic | $ | 2.62 | | | $ | (1.27) | | | $ | (0.61) | |
| Net income (loss) per share - diluted | $ | 2.55 | | | $ | 1.27 | | | $ | (0.61) | |
| | | | | | | | | | | | | | | | | |
| Year Ended December 31, |
| (in thousands, except per share amounts) | 2022 | | 2021 | | 2020 |
| Numerator for basic and diluted net (loss) income per share: | | | | | |
| Net (loss) income attributable to 3D Systems Corporation | $ | (122,711) | | | $ | 322,052 | | | $ | (149,594) | |
| Redeemable non-controlling interest redemption value in excess of carrying value | (596) | | | — | | | — | |
| Net (loss) income attributable to common stock shareholders | $ | (123,307) | | | $ | 322,052 | | | $ | (149,594) | |
| Denominator for net (loss) income per share: | | | | | |
| Weighted average shares – basic | 127,818 | | | 122,867 | | | 117,579 | |
Dilutive effect of shares issuable under stock based compensation and other plans(1) | — | | | 3,467 | | | — | |
| Weighted average shares – diluted | 127,818 | | | 126,334 | | | 117,579 | |
| | | | | |
| Net income (loss) per share – basic | $ | (0.96) | | | $ | 2.62 | | | $ | (1.27) | |
| Net income (loss) per share – diluted | $ | (0.96) | | | $ | 2.55 | | | $ | (1.27) | |
(1) Equity awards for the years ended December 31, 2022 and 2020 are deemed anti-dilutive because we reported a net loss for these periods. The dilutive impact of shareequity awards for December 31, 2021 is 2,755 shares, for which the calculation requires certain assumptions regarding assumed proceeds that willwould hypothetically repurchase unvestedcommon shares upon the conversion and exercise of restricted shares and outstanding stock options, respectively, and an estimate of 712 shares for the payment of accrued incentive compensation that willwas to be settled in shares. The share estimate is based on the accrued incentive compensation balance at the end of the year2021 divided by the 2021 average 2021 share price.
(2) Excludes
The following table presents the impactpotentially dilutive shares that were excluded from the computation of diluted earnings (loss) per share attributable to common stockholders because their effect was considered anti-dilutive for the years ended December 31, 2022, 2021 and 2020, respectively.
| | | | | | | | | | | | | | | | | |
| Year Ended December 31, |
| (in thousands) | 2022 | | 2021 | | 2020 |
| Restricted stock and restricted stock units | 5,015 | | | 1,779 | | | 3,540 | |
| Stock options | 420 | | | — | | | 420 | |
| Total | 5,435 | | | 1,779 | | | 3,960 | |
For the year ended December 31, 2022, the table above excludes the following: (1) an estimate of 718 shares shares contingently issuable upon the achievement of certain milestones in the Volumetric acquisition asearnout arrangement discussed in Note 3. The 20203; (2) an estimate of 341 shares for the payment of accrued incentive compensation that is expected to be settled in shares during the first quarter of 2023; and 2019 amounts represent outstanding equity awards(3) an estimate of 22 shares related to the dp polar earnout arrangement discussed in Note 3 that are anti-dilutive because we had a net loss in both years.contingently issuable. These share estimates are based on the expense recognized through December 31, 2022 divided by the 2022 average share price of $12 per share.
On November 16, 2021, the Company issued $460.0 million in aggregate principal amount of its 0% Convertible Senior Notes due November 15, 2026, as discussed in Note 14.The Notes’ impact to diluted shares will be calculated using the if-converted method as prescribed in ASU 2020-06.The Notes will increase the diluted share count when the average share price over a quarterly or annual reporting period is greater than $35.92 per share, the conversion price of the Notes.For the years ended December 31, 2022 and 2021, the Notes were anti-dilutive on a stand-alone basis because the average share price during these periods did not exceed the conversion price, and because we had a net loss for the year ended December 31, 2021 the Notes were anti-dilutive.2022.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
On August 5, 2020, we entered into an Equity Distribution Agreement for an At-The-Market equity offering program (“ATM Program”) where we may issue and sell, from time to time, shares of our common stock. Our ATM Program allowed for an aggregate gross sales price of up to a total of $150,000, depending upon market conditions and our liquidity requirements, through Truist Securities, Inc. and HSBC Securities (USA) Inc. For the year ended December 31, 2020, we sold 4,616 shares of our common stock under our ATM Program for net proceeds of $24,664, net of $849 in fees, commissions and other costs. As of December 31, 2020, we had $124,487 in availability remaining under the ATM Program. On January 6, 2021, we terminated the ATM Program.
(20) Noncontrolling InterestsRedeemable Non-controlling Interest
As of December 31, 2020, we owned 100% ofThe following table shows changes in the capital and voting rights of Robtec, a service bureau and distributor of 3D printing and scanning products in Brazil. Approximately 70% of the capital and voting rights of Robtec was acquired on November 25, 2014. On January 7, 2020, we made a payment equalRNCI related to the redemption price of $10,000 and acquired the remaining 30% of the capital and voting rights.Kumovis:
| | | | | | | | | |
| | Year Ended December 31, |
| (in thousands) | | 2022 | |
| Balance at January 1, 2022 | | $ | — | | |
| Fair value at the date of acquisition | | 1,559 | | |
| Net loss | | (238) | | |
| Redemption value in excess of carrying value | | 596 | | |
| Translation adjustments | | (157) | | |
| Balance at December 31, 2022 | | $ | 1,760 | | |
(21) Fair Value Measurements
Fair value is the exchange price to sell an asset or transfer a liability (an exit price) in an orderly transaction between market participants at the measurement date. Fair value measurements use market data or assumptions market participants would use in pricing the asset or liability, including assumptions about risk and the risks inherent in the inputs to the valuation technique. These inputs may be readily observable, corroborated by market data, or generally unobservable. Valuation techniques maximize the use of observable inputs and minimize use of unobservable inputs. The accounting guidance for fair value measurements and disclosures establishes a three-level fair value hierarchy:
•Level 1 - Inputs are based on quoted prices in active markets for identical assets and liabilities.
•Level 2 - Inputs are based on observable inputs other than quoted prices in active markets for identical or similar assets and liabilities.
•Level 3 - One or more inputs are unobservable and significant.
Financial and nonfinancial assets and liabilities are classified in their entirety based on the lowest level of input that is significant to the fair value measurement.
Cash equivalents Israeli severance funds and derivativesshort-term investments are valued utilizing the market approach to measure fair value for financial assets and liabilities. The market approach uses prices and other relevant information generated by market transactions involving identical or comparable assets or liabilities. The carrying amounts of our cash and cash equivalents, accounts receivable, accounts payable, and accrued liabilities approximate fair value as of December 31, 2022 and 2021 because of the relatively short duration of these instruments.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Assets and liabilities measured at fair value on a recurring basis are summarized below:
| | | | | | | | | | | | | | | | | | | | | | | |
| Fair Value Measurements as of December 31, 2021 |
| (in thousands) | Level 1 | | Level 2 | | Level 3 | | Total |
| Description | | | | | | | |
Cash equivalents a | $ | 485,521 | | | $ | — | | | $ | — | | | $ | 485,521 | |
Israeli severance funds b | — | | | 2,070 | | | — | | | 2,070 | |
| | | | | | | |
| Fair Value Measurements as of December 31, 2020 |
| (in thousands) | Level 1 | | Level 2 | | Level 3 | | Total |
| Description | | | | | | | |
Cash equivalents a | $ | 199 | | | $ | — | | | $ | — | | | $ | 199 | |
Israeli severance funds b | — | | | 6,422 | | | — | | | 6,422 | |
Derivative financial instruments c | $ | — | | | $ | (700) | | | $ | — | | | $ | (700) | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| Fair Value Measurement as of December 31, 2022 |
| Fair Value Measurement | | Balance Sheet Classification |
| (in thousands) | Fair Value Level | | Cost Basis | | Unrealized Gains (Losses) | | Fair Value | | Cash and Cash Equivalents (b) | | Short-term Investments and Marketable Securities | | |
| Money market funds | Level 1 | | $ | 232,018 | | | $ | — | | | $ | 232,018 | | | $ | 232,018 | | | $ | — | | | |
| Certificates of deposit | Level 2 | | 990 | | | 6 | | | 996 | | | — | | | 996 | | | |
| Commercial paper | Level 2 | | 1,281 | | | 6 | | | 1,287 | | | — | | | 1,287 | | | |
| Short-term bond mutual funds | Level 2 | | 100,242 | | | (99) | | | 100,143 | | | — | | | 100,143 | | | |
Corporate bonds(a) | Level 2 | | 78,418 | | | (241) | | | 78,177 | | | — | | | 78,177 | | | |
| | | | | | | | | | | | | |
| Total | | | $ | 412,949 | | | $ | (328) | | | $ | 412,621 | | | $ | 232,018 | | | $ | 180,603 | | | |
(a) Includes $745 and $743 of cost basis and fair market value, respectively, with a weighted average maturity of 1.3 years.
a.
Cash equivalents include funds held in
As of December 31, 2021, financial instruments measured at fair value on a recurring basis consisted of $485,521 of money market instruments and are reported at their current carrying value, which approximatesfunds classified as Level 1 within the fair value due to the short-term nature of these instrumentshierarchy and are included inreported within cash and cash equivalents in the consolidated balance sheet.
b.We partially fund a liability for our Israeli severance requirement through monthly deposits into fund accounts, the value of these contributions are recorded to non-current assets on the consolidated balance sheet.
c.Derivative instruments are reported based on published market prices for similar assets or are estimated based on published market prices for similar assets or are estimated based on observable inputs such as interest rates, yield curves, credit risks, spot and future commodity prices and spot and future exchange rates. See Note 15 for additional information on our derivative financial instruments.
We did not have any transfers of assets and liabilities between Level 1, Level 2 and Level 3 of the fair value measurement hierarchy during the yearyears ended December 31, 2022 and 2021.
In addition toEnhatch
As discussed in Note 3, the assets and liabilities included in the above table, certain of our assets and liabilitiesEnhatch warrants are measured at fair value on a non-recurring basis. This includes goodwillrecurring basis and other intangible assets which are measured at fair value at acquisition and adjusted to fair value only if their fair value falls below the initial fair value. For further discussion on the valuation techniques and inputs usedconsidered Level 3 in the fair value measurementhierarchy. The fair value of goodwillthese warrants at December 31, 2022 was $200. This balance is recorded in other non-current assets. The fair value of the warrants was determined via a valuation as of December 31, 2022 using a Monte Carlo simulation which applied a number of assumptions including, but not limited to, financial projections, equity and other intangible assets, see Notes 2, 3, 10revenue volatility estimates, risk free rates, comparable company financial metrics, correlations, risk factors and 11.rates of returns.
In addition, as a result of a decline in the estimated enterprise value of Enhatch as of September 30, 2022, as determined in connection with the measurement of the fair value of the Enhatch warrants, the Company recorded a non-recurring impairment charge of $2,770 as of September 30, 2022, which relates to its investment interest held in Enhatch in the form of preferred stock, inclusive of an embedded call option. The decline in the estimated enterprise value of Enhatch was the result of lower than projected revenues recognized by Enhatch during the third quarter of 2022, as well as a reduction to near-term forecasted revenues due to a delay in receiving certain regulatory approvals. The recognition of lower than projected revenues and the reduction to near-term forecasted revenues directly impacted the estimated fair value of the Company's investment in Enhatch, as Enhatch's enterprise value was estimated using a discounted cash flow model. As the discounted cash flow model applied relied upon significant unobservable inputs related to Enhatch's future performance, capital expenditures, working capital needs, and the required rate of return, the valuation of the Company's investment in Enhatch and the resulting impairment charge are deemed to be based upon Level 3 assumptions and a Level 3 valuation approach within the fair value hierarchy.
(22) Income Taxes
The components of our income before income taxes for the years ended December 31, 2022, 2021 and 2020 are as follows:
| | 2021 | | 2020 | | 2019 | |
| Income (Loss) before income taxes: | | | | | | | |
| (in thousands) | | (in thousands) | | 2022 | | 2021 | | 2020 |
| Income (loss) before income taxes: | | Income (loss) before income taxes: | | | | | | |
| Domestic | Domestic | | $ | 308,514 | | | $ | (45,973) | | | $ | (79,821) | | Domestic | | $ | (110,610) | | | $ | 308,514 | | | $ | (45,973) | |
| Foreign | Foreign | | 11,026 | | | (97,437) | | | 14,721 | | Foreign | | (10,199) | | | 11,026 | | | (97,437) | |
| Total | Total | | $ | 319,540 | | | $ | (143,410) | | | $ | (65,100) | | Total | | $ | (120,809) | | | $ | 319,540 | | | $ | (143,410) | |
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
The components of income tax provision for the years ended December 31, 2022, 2021 2020 and 20192020 are as follows:
| | 2021 | | 2020 | | 2019 | |
| (in thousands) | | (in thousands) | | 2022 | | 2021 | | 2020 |
| Current: | Current: | | | | | | | Current: | | | | | | |
| U.S. federal | U.S. federal | | $ | (8,675) | | | $ | 1,294 | | | $ | (135) | | U.S. federal | | $ | 119 | | | $ | (8,675) | | | $ | 1,294 | |
| State | State | | 2,097 | | | 451 | | | 801 | | State | | (498) | | | 2,097 | | | 451 | |
| Foreign | Foreign | | 6,861 | | | 5,645 | | | 7,220 | | Foreign | | 5,037 | | | 6,861 | | | 5,645 | |
| Total | Total | | 283 | | | 7,390 | | | 7,886 | | Total | | 4,658 | | | 283 | | | 7,390 | |
| | Deferred: | Deferred: | | Deferred: | |
| U.S. federal | U.S. federal | | — | | | 67 | | | (1,008) | | U.S. federal | | — | | | — | | | 67 | |
| State | State | | — | | | — | | | — | | State | | — | | | — | | | — | |
| Foreign | Foreign | | (2,795) | | | (1,273) | | | (2,346) | | Foreign | | (2,518) | | | (2,795) | | | (1,273) | |
| Total | Total | | (2,795) | | | (1,206) | | | (3,354) | | Total | | (2,518) | | | (2,795) | | | (1,206) | |
| Total income tax (benefit) provision | Total income tax (benefit) provision | | $ | (2,512) | | | $ | 6,184 | | | $ | 4,532 | | Total income tax (benefit) provision | | $ | 2,140 | | | $ | (2,512) | | | $ | 6,184 | |
The overall effective tax rate differs from the statutory federal tax rate for the years ended December 31, 2022, 2021 2020 and 20192020 as follows:
| | | % of Pretax Loss | | % of Pretax (Loss) Income |
| | 2021 | | 2020 | | 2019 | | 2022 | | 2021 | | 2020 |
| Tax provision based on the federal statutory rate | Tax provision based on the federal statutory rate | | 21.0 | % | | 21.0 | % | | 21.0 | % | Tax provision based on the federal statutory rate | | 21.0 | % | | 21.0 | % | | 21.0 | % |
| Increase in valuation allowances | Increase in valuation allowances | | (10.4) | | | (8.5) | | | (21.3) | | Increase in valuation allowances | | (10.7) | | | (10.4) | | | (8.5) | |
| Dividends not taxable | Dividends not taxable | | — | | | 9.5 | | | — | | Dividends not taxable | | — | | | — | | | 9.5 | |
| Net operating loss carryback claim | Net operating loss carryback claim | | — | | | 6.2 | | | — | | Net operating loss carryback claim | | — | | | — | | | 6.2 | |
| Change in carryforward attributes | Change in carryforward attributes | | (0.7) | | | (3.2) | | | — | | Change in carryforward attributes | | (1.9) | | | (0.7) | | | (3.2) | |
| Global intangible low-taxed income inclusion | Global intangible low-taxed income inclusion | | 1.2 | | | (0.3) | | | (7.0) | | Global intangible low-taxed income inclusion | | (0.5) | | | 1.2 | | | (0.3) | |
| Nondeductible expenses | | 1.4 | | | (13.5) | | | (1.8) | | |
| Taxes related to distributions | | — | | | — | | | (0.8) | | |
| Non-deductible expenses | | Non-deductible expenses | | (1.6) | | | 1.4 | | | (13.5) | |
| Non-deductible earnout expense | | Non-deductible earnout expense | | (2.8) | | | — | | | — | |
| Foreign income tax rate differential | Foreign income tax rate differential | | — | | | (3.3) | | | 1.0 | | Foreign income tax rate differential | | (0.3) | | | — | | | (3.3) | |
| Deemed income related to foreign operations | Deemed income related to foreign operations | | — | | | (1.6) | | | (0.5) | | Deemed income related to foreign operations | | (0.2) | | | — | | | (1.6) | |
| Tax rate change | Tax rate change | | (0.7) | | | (0.3) | | | (1.1) | | Tax rate change | | (1.2) | | | (0.7) | | | (0.3) | |
| Employee share-based payments | Employee share-based payments | | (1.3) | | | (1.4) | | | — | | Employee share-based payments | | (1.6) | | | (1.3) | | | (1.4) | |
| Other | Other | | — | | | (0.4) | | | (0.9) | | Other | | 0.4 | | | — | | | (0.4) | |
| Deferred and payable adjustments | Deferred and payable adjustments | | 1.4 | | | (2.6) | | | 3.3 | | Deferred and payable adjustments | | (1.7) | | | 1.4 | | | (2.6) | |
| ASU 842 adoption | | — | | | — | | | (0.1) | | |
| Non-deductible penalties | | Non-deductible penalties | | (2.5) | | | — | | | — | |
| State taxes, net of federal benefit, before valuation allowance | State taxes, net of federal benefit, before valuation allowance | | 1.0 | | | 0.5 | | | 2.8 | | State taxes, net of federal benefit, before valuation allowance | | 1.4 | | | 1.0 | | | 0.5 | |
| Return to provision adjustments | | (0.1) | | | 0.9 | | | (2.5) | | |
| Return-to-provision adjustments | | Return-to-provision adjustments | | (0.2) | | | (0.1) | | | 0.9 | |
| Other tax credits | Other tax credits | | (0.5) | | | 0.2 | | | (1.9) | | Other tax credits | | 0.8 | | | (0.5) | | | 0.2 | |
| Uncertain tax positions and audit settlements | Uncertain tax positions and audit settlements | | (3.0) | | | (7.5) | | | 2.8 | | Uncertain tax positions and audit settlements | | (0.2) | | | (3.0) | | | (7.5) | |
| Divestitures | Divestitures | | (10.1) | | | — | | | — | | Divestitures | | — | | | (10.1) | | | — | |
| Effective tax rate | Effective tax rate | | (0.8) | % | | (4.3) | % | | (7.0) | % | Effective tax rate | | (1.8) | % | | (0.8) | % | | (4.3) | % |
The difference between our effective tax rate for 2022 and the federal statutory rate was 22.8 percentage points. The difference in the effective rate is primarily due to valuation allowance changes and non-deductible expenses, including earnout expense and penalties.
The difference between our effective tax rate for 2021 and the federal statutory rate was 21.8 percentage points. The difference in the effective rate is primarily due to differences in book and stock bases related to the divestitures of Cimatron and Simbionix, valuation allowance changes, and adjustments to uncertain tax positions, provisions for GILTI, and non-deductible expenses.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
The difference between our effective tax rate for 2020 and the federal statutory rate was 25.3 percentage points. The difference in the effective rate is primarily due to valuation allowance changes, nondeductible impairment charges, dividends not taxable, net operating loss carryback claim, and adjustments to uncertain tax positions.
The difference between our effective tax rate for 2019In 2022, 2021 and the federal statutory rate was 28.0 percentage points. The difference in the effective rate is primarily due to valuation allowance changes, provisions for Global Intangible Low Taxed Income ("GILTI"), prior period adjustments and adjustments to uncertain tax positions.
In 2021, 2020, and 2019, there were no significant changes to our valuation allowance assertions. We continue to review results of operations and forecast estimates to determine if it is more likely than not that the deferred tax assets will be realized.
The components of our net deferred income tax assets and net deferred income tax (liabilities) at December 31, 20212022 and 20202021 are as follows:
| | (in thousands) | (in thousands) | | 2021 | | 2020 | (in thousands) | | 2022 | | 2021 |
| Deferred income tax assets: | Deferred income tax assets: | | | | | Deferred income tax assets: | | | | |
| Intangibles | | $ | 10,950 | | | $ | 17,395 | | |
| Intangible assets | | Intangible assets | | $ | 8,601 | | | $ | 10,950 | |
| Stock options and restricted stock awards | Stock options and restricted stock awards | | 8,005 | | | 2,544 | | Stock options and restricted stock awards | | 6,091 | | | 8,005 | |
| Reserves and allowances | Reserves and allowances | | 8,692 | | | 10,450 | | Reserves and allowances | | 6,145 | | | 8,692 | |
| Net operating loss carryforwards | Net operating loss carryforwards | | 38,394 | | | 67,025 | | Net operating loss carryforwards | | 51,845 | | | 38,394 | |
| Tax credit carryforwards | Tax credit carryforwards | | 19,967 | | | 18,813 | | Tax credit carryforwards | | 19,649 | | | 19,967 | |
| Accrued liabilities | Accrued liabilities | | 2,893 | | | 6,077 | | Accrued liabilities | | 2,518 | | | 2,893 | |
| Deferred revenue | Deferred revenue | | 8,141 | | | 4,637 | | Deferred revenue | | 5,502 | | | 8,141 | |
| Lease Tax Asset | | 10,362 | | | 8,343 | | |
| 163(j) Limitation Carryforward | | — | | | 2,854 | | |
| Lease tax assets | | Lease tax assets | | 9,589 | | | 10,362 | |
| Research expenditures capitalization | | Research expenditures capitalization | | 11,140 | | | — | |
| Other | | Other | | 1,180 | | | — | |
| Valuation allowance | Valuation allowance | | (91,165) | | | (123,113) | | Valuation allowance | | (100,694) | | | (91,165) | |
| Total deferred income tax assets | Total deferred income tax assets | | 16,239 | | | 15,025 | | Total deferred income tax assets | | 21,566 | | | 16,239 | |
| | Deferred income tax liabilities: | Deferred income tax liabilities: | | Deferred income tax liabilities: | |
| Intangibles | | 2,356 | | | 2,548 | | |
| Property, plant, and equipment | | 2,110 | | | 2,662 | | |
| Lease Tax Liability | | 8,458 | | | 6,379 | | |
| Intangible assets | | Intangible assets | | 9,090 | | | 2,356 | |
| Property and equipment | | Property and equipment | | 4,477 | | | 2,110 | |
| Lease tax liabilities | | Lease tax liabilities | | 7,785 | | | 8,458 | |
| | Other | Other | | 434 | | | 1,345 | | Other | | 807 | | | 434 | |
| Total deferred income tax liabilities | Total deferred income tax liabilities | | 13,358 | | | 12,934 | | Total deferred income tax liabilities | | 22,159 | | | 13,358 | |
| | Deferred income tax asset held for sale | | $ | — | | | $ | 560 | | |
| | Net deferred income tax assets | | $ | 2,881 | | | $ | 1,531 | | |
| Net deferred income tax (liabilities) assets | | Net deferred income tax (liabilities) assets | | $ | (593) | | | $ | 2,881 | |
At December 31, 2021, $38,3942022, $51,845 of our deferred income tax assets was attributable to $279,684$367,611 of gross net operating loss carryforwards, which consisted of $84,869$120,659 of loss carryforwards for U.S. federal income tax purposes, $144,455$168,364 of loss carryforwards for U.S. state income tax purposes and $50,360$78,587 of loss carryforwards for foreign income tax purposes. $23,797$11,128 of gross net operating loss carryforwards for U.S. federal income tax purposes are acquisition related and are subject to potential measurement period adjustments under ASC 805.
$1,304 of grossThe net operating loss carryforwards for U.S. federal income tax purposes will expire in 2037. All other loss carryforwards for U.S. federal income tax purposes do not expire. The net operating loss carryforwards for U.S. state income tax purposes begin to expire in 2022.2023. In addition, certain net loss carryforwards for foreign income tax purposes begin to expire in 2024 and certain other loss carryforwards for foreign purposes do not expire.
At December 31, 2021,2022, tax credit carryforwards included in our deferred income tax assets consisted of $8,411$9,090 of research and experimentation credit carryforwards for U.S. federal income tax purposes, $4,201$4,975 of research and experimentation tax credit carryforwards for U.S. state income tax purposes, and $6,629 of foreign tax credits for U.S. federal income tax purposes, and $729 of other state tax credits.purposes. Certain state research and experimentation and other state credits beganbegin to expire in 2021.2023. We have recorded a valuation allowance related to the U.S. federal and state tax credits.
Due to the one time transition tax, our previously unremitted earnings have been subjected to U.S. federal income tax, although, other additional taxes such as, withholding tax, could be applicable. We intend to permanently reinvest itsour earnings outside the U.S. and as such, have not provided for any additional taxes on approximately $121,509$122,732 of unremitted earnings. We believe the unrecognized deferred tax liability related to these earnings is approximately $5,210.$5,761.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Including interest and penalties, we decreased our unrecognized benefits by $10,300$691 for the year ended December 31, 20212022 and increased our unrecognized tax benefits by $1,659$580 for the year ended December 31, 2021.2022. The decrease was primarily related to the release of unrecognized tax benefits due to the receipt of two favorable U.S. private letter rulings and the settlement of an audit in a foreign jurisdiction. We do not anticipate any additional unrecognized tax benefits during the next 12 months that would result in a material change to our consolidated financial position. The total amount of unrecognized tax benefits that, if recognized, would affect the effective tax rate is $5,596.$5,710. We include interest and penalties in the consolidated financial statements as a component of income tax expense.
| | | Unrecognized Tax Benefits* | | Unrecognized Tax Benefits* |
| (in thousands) | (in thousands) | | 2021 | | 2020 | | 2019 | (in thousands) | | 2022 | | 2021 | | 2020 |
| Balance at January 1 | Balance at January 1 | | $ | (25,902) | | | $ | (15,467) | | | $ | (13,031) | | Balance at January 1 | | $ | (17,261) | | | $ | (25,902) | | | $ | (15,467) | |
| Increases related to prior year tax positions | Increases related to prior year tax positions | | (467) | | | (10,426) | | | (2,684) | | Increases related to prior year tax positions | | (192) | | | (467) | | | (10,426) | |
| Decreases related to prior year tax positions | Decreases related to prior year tax positions | | 8,886 | | | 788 | | | 857 | | Decreases related to prior year tax positions | | 508 | | | 8,886 | | | 788 | |
| Decreases related to prior year tax positions as a result of lapse of statute | Decreases related to prior year tax positions as a result of lapse of statute | | 371 | | | — | | | — | | Decreases related to prior year tax positions as a result of lapse of statute | | 145 | | | 371 | | | — | |
| Decreases related to settlement | Decreases related to settlement | | 1,043 | | | — | | | — | | Decreases related to settlement | | — | | | 1,043 | | | — | |
| Increases related to current year tax positions | Increases related to current year tax positions | | (553) | | | (797) | | | (609) | | Increases related to current year tax positions | | (269) | | | (553) | | | (797) | |
| Increases related to acquired tax positions | Increases related to acquired tax positions | | (639) | | | — | | | — | | Increases related to acquired tax positions | | (119) | | | (639) | | | — | |
| Decreases related to acquired tax positions | | Decreases related to acquired tax positions | | 38 | | | — | | | — | |
| Balance at December 31 | Balance at December 31 | | $ | (17,261) | | | $ | (25,902) | | | $ | (15,467) | | Balance at December 31 | | $ | (17,150) | | | $ | (17,261) | | | $ | (25,902) | |
* The unrecognized tax benefit balance includes an insignificant amount of interest and penalties.
Tax years 2013 through 20202021 remain subject to examination by the U.S. Internal Revenue Service (“IRS”). State income tax returns are generally subject to examination for a period of three to four years after filing the respective tax returns. The tax years 20162017 through 20202021 remain open to examination by the various foreign taxing jurisdictions to which the Company is subject.
The following presents the changes in the balance of our deferred income tax asset valuation allowance:
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| Year Ended | | Item | | Balance at beginning of year | | Additions (reductions) charged to expense | | Other | | Balance at end of year |
| 2021 | | Deferred income tax asset valuation allowance | | $ | 123,113 | | | $ | (31,948) | | | $ | — | | | $ | 91,165 | |
| 2020 | | Deferred income tax asset valuation allowance | | 109,643 | | | 13,470 | | | — | | | 123,113 | |
| 2019 | | Deferred income tax asset valuation allowance | | $ | 95,398 | | | $ | 14,245 | | | $ | — | | | $ | 109,643 | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| Year Ended | | Item | | Balance at beginning of year | | Additions (reductions) charged to expense | | Other | | Balance at end of year |
| 2022 | | Deferred income tax asset valuation allowance | | $ | 91,165 | | | $ | 12,848 | | | $ | (3,319) | | | $ | 100,694 | |
| 2021 | | Deferred income tax asset valuation allowance | | $ | 123,113 | | | $ | (31,948) | | | $ | — | | | $ | 91,165 | |
| 2020 | | Deferred income tax asset valuation allowance | | $ | 109,643 | | | $ | 13,470 | | | $ | — | | | $ | 123,113 | |
(23) Commitments and Contingencies
We lease certain of our facilities and equipment under non-cancelable operating and finance leases. See Note 7.
We have anThe Company has purchase commitments in excess of a year related to printer assemblies, inventory, purchase commitment with an assembling manufacturer. See Note 16.
Supply commitments totaled $31,094 and $55,317 ascapital expenditures. As of December 31, 2021 and 2020, respectively. Commitments for printer assemblies and inventory items at December 31, 2021 and 2020 were $29,916 and $27,030, respectively. Commitments for operating costs and capital expenditures at December 31, 2021 and 2020 were $1,179 and $28,287, respectively.2022, purchase commitments totaled $4,051.
Indemnification
In the normal course of business, we periodically enter into agreements to indemnify customers or suppliers against claims of intellectual property infringement made by third parties arising from the use of our products. Historically, costs related to these indemnification provisions have not been significant, and we are unable to estimate the maximum potential impact of these indemnification provisions on itsour future results of operations.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
To the extent permitted under Delaware law, we indemnify our directors and officers for certain events or occurrences while the director or officer is, or was, serving at our request in such capacity, subject to limited exceptions. The maximum potential amount of future payments we could be required to make under these indemnification obligations is unlimited; however, we have directors and officers insurance coverage that may enable us to recover future amounts paid, subject to a deductible and the policy limits. There is no assurance that the policy limits will be sufficient to cover all damages, if any.
Litigation
Export Controls and Government Contracts Compliance Matter
In October 2017, we received an administrative subpoena from the Bureau of Industry and Security of the Department of Commerce (“BIS”) requesting the production of records in connection with possible violations of U.S. export control laws, including with regard to our former Quickparts.com, Inc. subsidiary. In addition, while collecting information responsive to the above-referenced subpoena, our internal investigation identified potential violations of the International Traffic in Arms Regulations ”) administered by the Directorate of Defense Trade Controls of the Department of State (“DDTC”) and potential violations of the Export Administration Regulations administered by the BIS. On June 8, 2018 and thereafter, we submitted voluntary disclosures to BIS and DDTC identifying numerous potentially unauthorized exports between 2012 and 2017, including to China, of controlled items including technical data. In connection with these matters, in August 2020, we received two federal grand jury subpoenas issued by the U.S. District Court for the Northern District of Texas. The Company responded to these two subpoenas and will continue to fully cooperate with the U.S. Department of Justice (“DOJ“) in the related investigation.
Over the past several months, the Company engaged in settlement discussions with DDTC, BIS, and DOJ to settle the potential export control violations described above. On February 27, 2023, the Company settled these matters with all three agencies.
As a part of these settlement agreements, the Company agreed to pay $15,048 in civil monetary penalties to these agencies. The penalties are broken down as follows: The Company will pay DDTC $10,000 (in three installments over a three-year period), BIS $2,778, and DOJ $2,270, with an additional $10,000 in suspended penalty amounts to be allocated to remedial compliance measures required by DDTC. DDTC and BIS are further imposing remedial compliance measures in their agreements, including a Special Compliance Officer to monitor the company’s export compliance (DDTC only), additional processes, procedures, and training related to export control compliance (DDTC only), and external audit requirements (DDTC and BIS). To the extent any portion of the $10,000 suspended penalty is not expended on required remedial compliance measures by the end of the three-year term of the settlement agreement, then such shortfall shall be paid by the Company to DDTC. Accordingly, the $10,000 suspended penalty has not been recognized as a liability as of December 31, 2022 and will be recognized as incurred during the three-year term of the settlement agreement. The agencies are not criminally prosecuting the Company, nor anyone associated with the Company, and the Company is not subject to any administrative debarment. Over the course of our ongoing review of tradeinternal investigation, we have made meaningful improvements to our compliance risksprogram and ourwill continue to further enhance export compliance going forward.
In cooperation with the government on our export controls investigation, on November 20, 2019, we submitted to the U.S. Treasury Department’s Office of Foreign Assets Control (“OFAC”) an initial notice of voluntary disclosureself-disclosure regarding potential violations of economic sanctions related to Iran. We continued to investigate this issueAs part of our ongoing review of trade compliance risks and our cooperation with the government, we filed a final disclosuresself-disclosure report with OFAC on May 20, 2020 and a supplemental report December 21, 2021.
On December 22, 2022, we filed an initial notice with OFAC to further supplement the report. We havecontinue to investigate the matter in support of a final supplemental self-disclosure report. OFAC is not a party to the DDTC, BIS and DOJ settlements discussed above, and we will continue to implement compliance enhancements to our export controls, trade sanctions, and government contracting compliance program to address the issues identified through our ongoing internal investigation and will cooperate with DDTC and BIS, as well as the U.S. Departments of Justice, Defense, Homeland Security and TreasuryOFAC in their ongoing reviews of these matters. In connection with these ongoing reviews, in August 2020, the Company received 2 federal grand jury subpoenas issued by the U.S. District Court for the Northern District of Texas. The Company responded to these 2 subpoenas and will continue to fully cooperate with the U.S. Department of Justice in the related investigation.
In addition, on July 19, 2019, we received a notice of immediate suspension of federal contracting from the United States Air Force, pending the outcome of an ongoing investigation. The suspension applied to 3D Systems, its subsidiaries and affiliates, and was related to the potential export controls violations involving our ODM business described above. Under the suspension, we were generally prohibited from receiving new federal government contracts or subcontracts from any executive branch agency as described in the provisions of 48 C.F.R Subpart 9.4 of the Federal Acquisition Regulation. The suspension allowed us to continue to perform current federal contracts, and also to receive awards of new subcontracts for items under $35 and for items considered commercially available off-the-shelf items. The Air Force lifted the suspension on September 6, 2019 following the execution of a two-year Administrative Agreement with us. We are now eligible to obtain and perform U.S. government contracts and subcontracts without restrictions. Under the Administrative Agreement, we were monitored and evaluated by independent monitors who reported to the Air Force on our compliance with the terms of the Company’s Ethics & Compliance Program, including its overall culture, government contracting compliance program, and export controls compliance program. The Air Force terminated the Administrative Agreement and associated monitorship early, on August 12, 2021, after the monitors found that we had satisfied the requirements of the Administrative Agreement.this matter.
Although we cannot predict the ultimate resolution of these matters, we have incurred and expect to continue to incur significant legal costs and other expenses in connection with responding to the U.S. government agencies.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Shareholder Suits
The Company and certain of its current and former executive officers have been named as defendants in a consolidated putative stockholder class action lawsuit pending in the United States District Court for the Eastern District of New York. The action is styled In re 3D Systems Securities Litigation, No. 1:21-cv-01920-NGG-TAM (E.D.N.Y.) (the “Securities Class Action”). On July 14, 2021, the Court appointed a Lead Plaintiff for the putative class and approved his choice of Lead Counsel. Lead Plaintiff filed his Consolidated Amended Complaint (the “Amended Complaint”) on September 13, 2021, alleging that defendants violated the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and SEC Rule 10b-5 promulgated thereunder by making false and misleading statements and omissions, and that the current and former executive officers named as defendants are control persons under Section 20(a) of the Exchange Act. The Amended Complaint was filed on behalf of stockholders who purchased shares of the Company’s common stock between May 6, 2020 and March 5, 2021, and seeks monetary damages on behalf of the purported class. DefendantsThe defendants moved to dismiss the Amended Complaint on February 15, 2022, and the motion will bewas fully briefed in May 2022. On October 28, 2022, the parties notified the District Court that they reached an agreement in principle resolving this action, and on December 19, 2022, Lead Plaintiff filed a motion seeking entry of an order preliminary approving the settlement and establishing notice procedures. The settlement is subject to both preliminary and final approval by the District Court. On April 15, 2022, the Company was informed the SEC is conducting a formal investigation of the Company related to, among other things, the allegations in the Securities Class Action and the Company received a subpoena from the SEC for the production of documents and information related to its investigation as a follow on to a previous voluntary request for documents. The Company is cooperating with the SEC.
The Company has been named as a nominal defendant and certain of its current and former executive officers and directors have been named as defendants in derivative lawsuits pending in the United States District Court for the Eastern District of New York and the South Carolina Court of Common Pleas for the 16th Circuit, York County, and the Supreme Court of the State of New York, Kings County. The actions are styled Nguyen v. Joshi, et al., No. 21-cv-03389-DG-CLP21-cv-03389-NGG-TAM (E.D.N.Y.) (the “New York Derivative“Nguyen Action”), Lesar v. Graves, et al., No. 2021CP4602308 (S.C., Ct. of Common Pleas for the 16th Judicial Cir., Cty. of York) (the “Lesar Action”), and Scanlon v. Graves, et al., No. 2021CP4602312 (S.C., Ct. of Common Pleas for the 16th Judicial Cir., Cty. of York) (the “Scanlon Action”), Bohus v. Joshi, et al., No. 22-cv-2203-CBA-RML (E.D.N.Y.) (the “Bohus Action”), and Fernicola v. Clinton, et. al., No. 512613/2022 (N.Y., Kings County Supreme Court) (the “Fernicola Action”). The ComplaintComplaints in the New York Derivative Action,Nguyen and Bohus Actions, which waswere filed on June 15, 2021 assertsand April 18, 2022, respectively, assert breach of fiduciary duty claims against all defendants and claims for contribution under the federal securities laws against certain of the defendants. The Complaints in the Lesar Action and the Scanlon Action,Actions, which were filed on July 26, 2021, assert breach of fiduciary duty and unjust enrichment claims against the defendants. The Complaint in the Fernicola Action was filed on May 2, 2022, and asserts claims for breach of fiduciary duty and waste of corporate assets against the director defendants. On August 27, 2021, the New York DerivativeNguyen Action was stayed until 30 days after the earlier of: (i) the close of discovery in the Securities Class Action, or (ii) the deadline for appealing a dismissal of the Securities Class Action with prejudice. On October 26, 2021, the Lesar Action and the Scanlon Action were consolidated into a single stockholder derivative action, styled as In Re 3D Systems Corp. Shareholder Derivative Litigation, No. 2021CP4602308 (S.C., Ct. of Common Pleas for the 16th Judicial Cir., Cty. Of York) (the “South Carolina Derivative Action”). On March 3, 2022, the South Carolina Derivative Action was stayed until 30 days after the earlier of: (i) the close of discovery in the Securities Class Action, or (ii) the deadline for appealing a dismissal of the Securities Class Action with prejudice. On June 16, 2022, the Bohus Action was consolidated with the Nguyen Action (the “E.D.N.Y. Derivative Action”). The E.D.N.Y. Derivative Action is stayed until 30 days after the earlier of: (i) the close of discovery in the Securities Class Action, or (ii) the deadline for appealing a dismissal of the Securities Class Action with prejudice. On August 15, 2022, the Fernicola Action was voluntarily dismissed without prejudice.
The Company believes the claims alleged in the putative securities class action and derivative lawsuits are without merit and the Company intends to defend itself and its current and former officers vigorously.
Other
We are involved in various other legal matters incidental to our business. Although we cannot predict the results of the litigation with certainty, we believe that the disposition of all these various other legal matters will not have a material adverse effect, individually or in the aggregate, on our consolidated results of operations, consolidated cash flows or consolidated financial position.
In connection with the foregoing matters, we have recognized a liability of $16,044 as of December 31, 2022, which includes the $10,000 DDTC civil monetary penalty being recognized at a discount using the risk-free interest rate.
3D SYSTEMS CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
(24) Accumulated Other Comprehensive Loss
The changes in the balances of accumulated other comprehensive loss by component are as follows:
| | (in thousands) | (in thousands) | Foreign currency translation adjustment | | Defined benefit pension plan | | Derivative financial instruments | | Liquidation of non-US entity and purchase of non-controlling interests | | Total | (in thousands) | Foreign currency translation adjustment | | Defined benefit pension plan | | Derivative financial instruments | | Unrealized loss on short-term investments | | Total |
| Balance at December 31, 2019 | Balance at December 31, 2019 | $ | (33,616) | | | $ | (3,707) | | | $ | (318) | | | $ | 594 | | | $ | (37,047) | | Balance at December 31, 2019 | $ | (33,022) | | | $ | (3,707) | | | $ | (318) | | | $ | — | | | $ | (37,047) | |
| Other comprehensive income (loss) | Other comprehensive income (loss) | 28,752 | | | 783 | | | (1,638) | | | (561) | | | 27,336 | | Other comprehensive income (loss) | 28,191 | | | 783 | | | (1,638) | | | — | | | 27,336 | |
Amounts reclassified from accumulated other comprehensive income (loss) a | Amounts reclassified from accumulated other comprehensive income (loss) a | — | | | — | | | 1,235 | | | — | | | 1,235 | | Amounts reclassified from accumulated other comprehensive income (loss) a | — | | | — | | | 1,235 | | | — | | | 1,235 | |
| Balance at December 31, 2020 | Balance at December 31, 2020 | (4,864) | | | (2,924) | | | (721) | | | 33 | | | (8,476) | | Balance at December 31, 2020 | (4,831) | | | (2,924) | | | (721) | | | — | | | (8,476) | |
| Other comprehensive income (loss) | Other comprehensive income (loss) | (30,633) | | | 682 | | | — | | | — | | | (29,951) | | Other comprehensive income (loss) | (30,633) | | | 682 | | | — | | | — | | | (29,951) | |
Amounts reclassified from accumulated other comprehensive income (loss) a | Amounts reclassified from accumulated other comprehensive income (loss) a | — | | | — | | | 721 | | | — | | | 721 | | Amounts reclassified from accumulated other comprehensive income (loss) a | — | | | — | | | 721 | | | — | | | 721 | |
| Balance at December 31, 2021 | Balance at December 31, 2021 | $ | (35,497) | | | $ | (2,242) | | | $ | — | | | $ | 33 | | | $ | (37,706) | | Balance at December 31, 2021 | (35,464) | | | (2,242) | | | — | | | — | | | (37,706) | |
| Other comprehensive income (loss) | | Other comprehensive income (loss) | (18,730) | | | 2,777 | | | — | | | (3,557) | | | (19,510) | |
Amounts reclassified from accumulated other comprehensive income (loss) a | | Amounts reclassified from accumulated other comprehensive income (loss) a | — | | | 165 | | | — | | | 3,229 | | | 3,394 | |
| Balance at December 31, 2022 | | Balance at December 31, 2022 | $ | (54,194) | | | $ | 700 | | | $ | — | | | $ | (328) | | | $ | (53,822) | |
a.Amount reclassified into Interestinterest and other expense,income (expense), net on the statement of operations. See Note 15.
The amounts presented in the table above are in other comprehensive loss and are net of income taxes. For additional information about foreign currency translation and derivative financial instruments, see NoteNotes 2 and 15. For additional information about the defined benefit pension plan, see Note 12.
(25) Restructuring and Exit Activity Costs
On August 5, 2020, we announced, in connection with the new strategic focus, a restructuring plan intended to align our operating costs with current revenue levels and better position the Company for future sustainable and profitable growth. The restructuring plan included a reduction of nearly 20% of our workforce, with the majority of the workforce reduction completed by December 31, 2020. We completed the restructuring efforts in the second quarter of 2021. Cost reduction efforts included reducing the number of facilities and examining every aspect of our manufacturing and operating costs.Wecosts. We incurred cash charges for severance, facility closing and other costs, primarily in the second half of 2020, and continued to incur additional charges through the second quarter of 2021, when we finalized all the actions to be taken. Non-cash charges related to these actions were $6,400 and are included in facility closing costs. We also divested parts of the business that did not align with this strategic focus. See Note 4.
In connection with the restructuring plan, we recorded pre-tax costs during the years ended December 31, 2021 and 2020, included within selling, general and administrative in the consolidated statementstatements of operations as follows:
| | | | | | | | | | | | | | | | | | | | | | | |
| (in thousands) | | Costs Incurred during 2020 | | Costs Incurred during 2021 | | | Total Costs Incurred |
| Severance, termination benefits and other employee costs | | $ | 12,914 | | | $ | 660 | | | | $ | 13,574 | |
| Facility closing costs | | 6,470 | | | 640 | | | | 7,110 | |
| Other costs | | 668 | | | (179) | | | | 489 | |
| Total | | $ | 20,052 | | | $ | 1,121 | | | | $ | 21,173 | |
The liabilities at December 31, 2020 related to these costs were principally recorded in accrued expenses in the consolidated balance sheets and consisted of severance, termination benefits and other employee costs of $7,173. There were no liabilities recorded at December 31, 2022 and 2021.
(26) Subsequent Events
We have agreed to acquire Kumovis GmbHThere are no subsequent events except as disclosed within Note 7 and Titan Additive LLC for a combined purchase price of $80 million, before customary closing adjustments. Titan is a pellet-based extrusion platform that addresses customer applications requiring large build volumes, superior performance, and improved productivity at significantly lower cost, opens up new markets in the Industrial segment. Kumovis, servicing the Healthcare segment, utilizes polyether ether keton or PEEK materials, which has properties that lend it to many medical applications, including many implant applications, that fit perfectly into our personalized healthcare operations. These are expected to close in the second quarter of 2022 and the combined impact of both acquisitions are not expected to have a near-term material impact to the Company's financial position, statement of operations or cash flows, other than the use of cash for the purchase price and the potential increase in goodwill and intangible assets.Note 23.
