UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

Albemarle Corporation was incorporated in Virginia in 1993. Our principal executive offices are located at 4250 Congress Street, Suite 900, Charlotte, North Carolina 28209. Unless the context otherwise indicates, the terms “Albemarle,” “we,” “us,” “our” or “the Company” mean Albemarle Corporation and its consolidated subsidiaries.

We are a leading global developer, manufacturer and marketer of highly-engineered specialty chemicals that are designed to meet our customers’ needs across a diverse range of end markets. We believe ourOur corporate purpose is making the world safe and sustainable by powering the potential of people. The end markets we serve include energy storage, petroleum refining, consumer electronics, construction, automotive, lubricants, pharmaceuticals and crop protection and custom chemistry services.protection. We believe that our commercial and geographic diversity, technical expertise, access to high-quality resources, innovative capability, flexible, low-cost global manufacturing base, experienced management team and strategic focus on our core base technologies will enable us to maintain leading positions in those areas of the specialty chemicals industry in which we operate.

We and our joint ventures currently operate more than 25 production and research and development (“R&D”) facilities, as well as a number of administrative and sales offices, around the world. As of December 31, 2020,2021, we served approximately 2,3002,100 customers, none of which individually represents more than 10% of net sales of the Company, in approximately 7570 countries. For information regarding our unconsolidated joint ventures see Note 10, “Investments,” to our consolidated financial statements included in Part II, Item 8 of this report.

Business Segments

During 2020,2021, we managed and reported our operations under three reportable segments: Lithium, Bromine Specialties and Catalysts. Each segment has a dedicated team of sales, research and development, process engineering, manufacturing and sourcing, and business strategy personnel and has full accountability for improving execution through greater asset efficiency, market focus, agility and responsiveness. Financial results and discussion about our segments included in this Annual Report on Form 10-Kreport are organized according to these categories except where noted.

For financial information regarding our reportable segments and geographic area information, see Note 25, “Segment and Geographic Area Information,” to our consolidated financial statements included in Part II, Item 8 of this report.

Lithium Segment

Our Lithium business develops lithium-based materials for a wide range of industries and end markets. We are a low-cost producer of one of the most diverse product portfolios of lithium derivatives in the industry.

We develop and manufacture a broad range of basic lithium compounds, including lithium carbonate, lithium hydroxide, lithium chloride, and value-added lithium specialties and reagents, including butyllithium and lithium aluminum hydride. Lithium is a key component in products and processes used in a variety of applications and industries, which include lithium batteries used in consumer electronics and electric vehicles, high performance greases, thermoplastic elastomers for car tires, rubber soles and plastic bottles, catalysts for chemical reactions, organic synthesis processes in the areas of steroid chemistry and vitamins, various life science applications, as well as intermediates in the pharmaceutical industry, among other applications. We also develop and manufacture cesium products for the chemical and pharmaceutical industries, and zirconium, barium and titanium products for various pyrotechnical applications, including airbag initiators.

In addition to developing and supplying lithium compounds, we provide technical services, including the handling and use of reactive lithium products. We also offer our customers recycling services for lithium-containing by-products resulting from synthesis with organolithium products, lithium metal and other reagents. We plan to continue to focus on the development of new products and applications.

Competition

The global lithium market consists of producers primarily located in the Americas, Asia and Australia. Major competitors in lithium compounds include Sociedad Quimica y Minera de Chile S.A., Sichuan Tianqi Lithium, Jiangxi Ganfeng Lithium and Livent Corporation. In the cesium and other specialty metal business, key competitors include Sinomine and Sigma-Aldrich Corporation. Competition in the global lithium market is largely based on product quality, product diversity, reliability of supply and customer service.

Raw Materials and Significant Supply Contracts

The major raw materials we use in our Catalysts operations include sodium silicate, sodium aluminate, kaolin, aluminum, ethylene, alpha-olefins, isobutylene, toluene and metals, such as lanthanum, molybdenum, nickel and cobalt, most of which are readily available from numerous independent suppliers and are purchased or provided under contracts at prices we believe are competitive. The cost of raw materials is generally based on market prices, although we may use contracts with price caps or other tools, as appropriate, to mitigate price volatility.

As of December 31, 2020,2021, we had approximately 5,9006,000 employees, including employees of our consolidated joint ventures, of whom 2,800,2,600, or 47%43%, are employed in the U.S. and the Americas; 1,400,1,600, or 24%, are employed in Europe; 1,300, or 22%27%, are employed in Asia PacificPacific; 1,400, or 23%, are employed in Europe; and 400, or 7%, are employed in the Middle East or other areas. Approximately 42%46% of these employees are represented by unions or works councils. We believe that we generally have a good relationship with our employees, and with those unions and works councils.

The health and safety of our employees is a part of our core values at Albemarle and is integral to how we conduct business. Our employees, contractors, and visitors follow a comprehensive set of written health and safety policies and procedures at both the corporate and local site levels. We routinely audit ourselves against our policies, procedures and standards, using internal and third-party resources. We also include health and safety metrics in our annual incentive plan for all employees to incentivize our commitment to safety. In 2020,2021, we improved our Occupational Safety and Health Act (“OSHA”) occupational injury and illness incident rate to 0.260.19 for our employees and nested contractors, compared to 0.330.26 in 2019.2020. In

In response to the COVID-19 pandemic, Albemarle created aAlbemarle’s cross-functional Global Response Team which has met biweekly since April 2020continues to assess the situation and take necessary actionsmeet regularly to address employee health and safety and operational challenges. Our first priority is always the health and well-being of our employees, customers, and communities. Since the start of the pandemic, our focus has shifted from managing an immediate crisis to building in the flexibility needed to adjust for regional differences and changing conditions. Protocols that include restricted travel, shift adjustments, increased hygiene, and social distancing for the essential workers at our plants have been put in place at all locations. In some regions, employees are able to return to their work sites. Other regions, including most of North and South America, remain on work-from-home protocols for non-essential personnel.

In 2020, we hired a Vice President, Diversity and Inclusion, to accelerate our inclusion and diversity initiatives and deliver meaningful change in our global organization. Our primary focus in our recruiting efforts is to drive greater diversity in our workforce, including higher representation in the professional and managerial job categories. We want to ensure that our workplace reflects the communities in which we live and work. Our recruiting policy includes a requirement that we include individuals from gender or racial minority groups among those we interview for openings at the manager level and above.

We seek to provide employees with a desirable workplace that will enable us to attract and retain top talent. We believe employees should be compensated through wages and benefits, based on experience, expertise, performance, and the criticality of their roles in the Company. We also perform an annual review of our pay practices to ensure that they are fair and equitable, and not influenced by biased opinions or discrimination. In addition, we have established employee groups, known as Connect groups, to promote an atmosphere of inclusion and encouragement in which every employee’s voice can be heard. These Connect groups provide opportunities for employees to share their backgrounds, experiences, and beliefs, and to use them to benefit others through mentoring and volunteering in the local community, among other activities.

Investing in talent is a critical process for Albemarle because it allows us to be proactive and anticipate key organizational needs for talent and capabilities. This enables us to efficiently and effectively ensure that we have the right talent pipeline to drive Albemarle’s success into the future. We also provide leadership development through performance coaching, 360-degree feedback, plant training including health, safety and environmental, and experiential development and mentoring. Our leadership development is a cornerstone to our talent management strategy.

We have an international strategic account program that uses cross-functional teams to serve large global customers. This program emphasizes creative strategies to improve and strengthen strategic customer relationships with emphasis on creating value for customers and promoting post-sale service. Complementing this program are regional Albemarle sales and technical personnel around the world who serve numerous additional customers globally. We also utilize commissioned sales representatives and specialists in specific market areas when necessary or required by law.

We believe that in order to generate revenue growth, maintain our margins and remain competitive, we must continually invest in research and development, product and process improvements and specialized customer services. Our research and development efforts support each of our business segments. The objective of our research and development efforts is to develop innovative chemistries and technologies with applications relevant within targeted key markets through both process and new product development. Through research and development, we continue to seek increased margins by introducing value-added products and proprietary processes and innovative green chemistry technologies. Our green chemistry efforts focus on the development of products in a manner that minimizes waste and the use of raw materials and energy, avoids the use of toxic reagents and solvents and utilizes safe, environmentally friendly manufacturing processes. Green chemistry is encouraged with our researchers through periodic focus group discussions and special rewards and recognition for outstanding new green developments.

Our intellectual property, including our patents, licenses and trade names, is an important component of our business. As of December 31, 2020,2021, we owned approximately 2,100more than 2,000 active patents and approximately 550more than 450 pending patent applications in key

Our business is subject to a broad array of employee health and safety laws and regulations, including those under the OSHA. We also are subject to similar state laws and regulations as well as local laws and regulations for our non-U.S. operations. We devote significant resources and have developed and implemented comprehensive programs to promote the health and safety of our employees and we maintain an active health, safety and environmental program. As noted above, we finished 20202021 with an OSHA occupational injury and illness incident rate of 0.260.19 for Albemarle employees and nested contractors, compared to 0.330.26 in 2019.2020.

Our business and our customers are subject to significant requirements under the European Community Regulation for the Registration, Evaluation, Authorization and Restriction of Chemicals (“REACH”). REACH imposes obligations on European Union manufacturers and importers of chemicals and other products into the European Union to compile and file comprehensive reports, including testing data, on each chemical substance, and perform chemical safety assessments. Additionally, substances of high concern, as defined under REACH, are subject to an authorization process. Authorization may result in restrictions in the use of products by application or even banning the product. REACH regulations impose significant additional responsibilities on chemical producers, importers, downstream users of chemical substances and preparations, and the entire supply chain. Our significant manufacturing presence and sales activities in the European Union require significant compliance costs and may result in increases in the costs of raw materials we purchase and the products we sell. Increases in the costs of our products could result in a decrease in their overall demand; additionally, customers may seek products with lower regulatory compliance requirements, which could also result in a decrease in the demand of certain products subject to the REACH regulations.

The Toxic Substances Control Act (“TSCA”), as amended in June 2016, requires chemicals to be assessed against a risk-based safety standard and calling for the elimination of unreasonable risks identified during risk evaluation. This regulation and other pending initiatives at the U.S. state level, as well as initiatives in Canada, Asia and other regions, will potentially require toxicological testing and risk assessments of a wide variety of chemicals, including chemicals used or produced by us. These assessments may result in heightened concerns about the chemicals involved and additional requirements being placed on the production, handling, labeling or use of the subject chemicals. Such concerns and additional requirements could also increase the cost incurred by our customers to use our chemical products and otherwise limit the use of these products, which could lead to a decrease in demand for these products.

Historically, there has been scrutiny of certain brominated flame retardants by regulatory authorities, legislative bodies and environmental interest groups in various countries. We manufacture a broad range of brominated flame retardant products, which are used in a variety of applications. Concern about the impact of some of our products on human health or the environment may lead to regulation or reaction in our markets independent of regulation.

See “Safety and Environmental Matters” in Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations for further details.

Climate Change and Natural Resources

The growing concerns about climate change and the related increasingly stringent regulations may provide us with new or expanded business opportunities. We provide solutions to companies pursuing alternative fuel products and technologies (such as renewable fuels), emission control technologies (including mercury emissions), alternative transportation vehicles and energy storage technologies and other similar solutions. As demand for, and legislation mandating or incentivizing the use of, alternative fuel technologies that limit or eliminate greenhouse gas emissions increase, we continue to monitor the market and offer solutions where we have appropriate technology and believe we are well positioned to take advantage of opportunities that may arise from such demand or legislation.

Recent Acquisitions, Joint Ventures and Divestitures

During recent years, we have devoted resources to acquisitions and joint ventures, including the subsequent integration of acquired businesses. These acquisitions and joint ventures have expanded our base business, provided our customers with a wider array of products and presented new alternatives for discovery through additional chemistries. In addition, we have pursued opportunities to divest businesses which do not fit our high priority business growth profile. Following is a summary of our significant acquisitions, joint ventures and divestitures over the last three years.

In the fourth quarter of 2020, we divested our ownership interest in the Saudi Organometallic Chemicals Company LLC (“SOCC”) joint venture for cash proceeds of $11.0 million. As a result of this divestiture, the Company recorded a gain of $7.2 million in Other expenses, net during the year ended December 31, 2020.

On October 31, 2019, we completed the acquisition of a 60% interest in MRL’s Wodgina Project in Western Australia for a total purchase price of approximately $1.3 billion. As part of this acquisition, we formed MARBL, an unincorporated joint venture with MRL, for the exploration, development, mining, processing and production of lithium and other minerals (other than iron ore and tantalum) from the Wodgina Project and for the operation of the Kemerton assets.

These transactions reflect our commitment to investing in future growth of our high priority businesses, maintaining leverage flexibility and returning capital to our shareholders.

Available Information

In addition, certain of our operations, and we have ongoing capital projects, in regions of the world such as the Middle East and South America, that are of high risk due to significant civil, political and security instability. Unanticipated events, such as geopolitical changes, could result in a write-down of our investment in the affected joint venture or a delay or cause cancellation of those capital projects, which could negatively impact our future growth and profitability. Our success as a global business will depend, in part, upon our ability to succeed in differing legal, regulatory, economic, social and political conditions by developing, implementing and maintaining policies and strategies that are effective in each location where we and our joint ventures do business.

The long-term profitability of our operations will, in part, depend on our ability to continue to economically obtain resources, including energy and raw materials. For example, our lithium and bromine businesses rely upon our continued ability to produce, or otherwise obtain, lithium and bromine of sufficient quality and in adequate amounts to meet our customers’ demand. If we fail to secure and retain the rights to continue to access these key raw materials, we may have to restrict or suspend our operations that rely upon these key resources, which could harm our business, results of operations and financial condition. In addition, in some cases access to these raw materials by us and our competitors is subject to decisions or actions by governmental authorities, which could adversely impact us. Furthermore, other raw material and energy costs account for a significant percentage of our total costs of products sold, even if they can be obtained on commercially reasonable terms. Our raw material and energy costs can be volatile and may increase significantly. Increases are primarily driven by tightening of market conditions and major increases in the pricing of key constituent materials for our products such as crude oil, chlorine and metals (including molybdenum and rare earths which are used in the refinery catalysts business). We generally attempt to pass through changes in the prices of raw materials and energy to our customers, but we may be unable to do so (or may be delayed in doing so). In addition, raising prices we charge to our customers in order to offset increases in the prices we pay for raw materials could cause us to suffer a loss of sales volumes. Our inability to efficiently and effectively pass through price increases, or inventory impacts resulting from price volatility, could adversely affect our margins.

We compete against a number of highly competitive global specialty chemical producers. Competition is based on several key criteria, including product performance and quality, product price, product availability and security of supply, and responsiveness of product development in cooperation with customers and customer service. Some of our competitors are larger than we are and may have greater financial resources. These competitors may also be able to maintain significantly greater operating and financial flexibility. As a result, these competitors may be better able to withstand changes in conditions within our industry. Competitors’ pricing decisions could compel us to decrease our prices, which could negatively affect our margins and profitability. Our ability to maintain or increase our profitability is, and will continue to be, dependent upon our ability to offset decreases in the prices and margins of our products by improving production efficiency and volume and other productivity enhancements, shifting to production of higher margin chemical products and improving existing products through innovation and research and development. If we are unable to do so or to otherwise maintain our competitive position, we could lose market share to our competitors.

In addition, Albemarle’s brands, product image and trademarks represent the unique product identity of each of our products and are important symbols of the Company’s reputation. Accordingly, the performance of our business could be adversely affected by any marketing and promotional materials used by our competitors that make adverse claims, whether with or without merit, against our Company or its products, imply or assert immoral or improper conduct by us, or are otherwise disparaging of our Company or its products. Further, our own actions could hurt such brands, product image and trademarks if our products underperform or we otherwise draw negative publicity.

Our industries and the end markets into which we sell our products experience technological change and product improvement. Manufacturers periodically introduce new products or require new technological capacity to develop customized products. Our future growth depends on our ability to gauge the direction of the commercial and technological progress in all key end markets in which we sell our products and upon our ability to fund and successfully develop, manufacture and market products in such changing end markets. As a result, we must commit substantial resources each year to research and development. There is no assurance that we will be able to continue to identify, develop, market and, in certain cases, secure regulatory approval for, innovative products in a timely manner or at all, as may be required to replace or enhance existing products, and any such inability could have a material adverse effect on our profit margins and our competitive position.

Despite our efforts, we may not be successful in developing new products and/or technology, either alone or with third parties, or licensing intellectual property rights from third parties on a commercially competitive basis. Our new products may not be accepted by our customers or may fail to receive regulatory approval. Moreover, new products may have lower margins than the products they replace. Furthermore, ongoing investments in research and development for the future do not yield an immediate beneficial impact on our operating results and therefore could result in higher costs without a proportional increase in revenues.

The development and adoption of new battery technologies that rely on inputs other than lithium compounds, could significantly impact our prospects and future revenues. Current and next generation high energy density batteries for use in electric vehicles rely on lithium compounds as a critical input. Alternative materials and technologies are being researched with the goal of making batteries lighter, more efficient, faster charging and less expensive, and some of these could be less reliant on lithium compounds. We cannot predict which new technologies may ultimately prove to be commercially viable and on what time horizon. Commercialized battery technologies that use no, or significantly less, lithium could materially and adversely impact our prospects and future revenues.

Downturns in the businesses that use our specialty chemicals may adversely affect our sales. Many of our customers are in industries, including the electronics, building and construction, oilfield and automotive industries, which are cyclical in nature, or which are subject to secular market downturns. Historically, cyclical or secular industry downturns have resulted in diminished demand for our products, excess manufacturing capacity and lower average selling prices, and we may experience similar problems in the future. A decline in our customers’ industries may have a material adverse effect on our sales and profitability.

Our HPC catalysts are used by petroleum refiners in their processing units to reduce the quantity of sulfur and other impurities in petroleum products. The effectiveness of HPC catalysts diminishes with use, requiring the HPC catalysts to be replaced, on average, once every one to four years. The sales of our HPC catalysts, therefore, are largely dependent on the useful life cycle of the HPC catalysts in the processing units and may vary materially by quarter. In addition, the timing and profitability of HPC catalysts sales can have a significant impact on revenue and profit in any one quarter. Sales of our agrichemicals are also subject to fluctuation as demand varies depending on climate and other environmental conditions, which may prevent or reduce farming for extended periods. In addition, crop pricing and the timing of when farms alternate from one crop to another crop in a particular year can also alter sales of agrichemicals.

We manufacture or market a number of products that are or have been the subject of attention by regulatory authorities and environmental interest groups. For example, over the past decade, there has been increasing scrutiny of certain brominated flame retardants by regulatory authorities, legislative bodies and environmental interest groups in various countries. We manufacture a broad range of brominated flame retardant products, which are used in a variety of applications to protect people, property and the environment from injury and damage caused by fire. Concern about the impact of some of our products on human health or the environment may lead to regulation, or reaction in our markets independent of regulation, that could reduce or eliminate markets for such products.

Agencies in the European Union (“E.U.”) continue to evaluate the risks to human health and the environment associated with certain brominated flame retardants such as tetrabromobisphenol A and decabromodiphenylethane, both of which we manufacture. Additional government regulations, including limitations or bans on the use of brominated flame retardants, could result in a decline in our net sales of brominated flame retardants and have an adverse effect on our sales and profitability. In addition, the threat of additional regulation or concern about the impact of brominated flame retardants on human health or the environment could lead to a negative reaction in our markets that could reduce or eliminate our markets for these products, which could have an adverse effect on our sales and profitability.

Our business and our customers are subject to significant requirements under REACH, which imposes obligations on E.U. manufacturers and importers of chemicals and other products into the E.U. to compile and file comprehensive reports, including testing data, on each chemical substance, and perform chemical safety assessments. Additionally, substances of high concern, as defined under REACH, are subject to an authorization process, which may result in restrictions in the use of products by application or even banning the product. REACH regulations impose significant additional burdens on chemical producers, importers, downstream users of chemical substances and preparations, and the entire supply chain. See “Regulation” in Item 1. Business. Our significant manufacturing presence and sales activities in the E.U. requires significant compliance costs and may result in increases in the costs of raw materials we purchase and the products we sell. Increases in the costs of our products could result in a decrease in their overall demand; additionally, customers may seek products with lower regulatory compliance requirements, which could also result in a decrease in the demand of certain products subject to the REACH regulations.

The TSCA requires chemicals to be assessed against a risk-based safety standard and calling for the elimination of unreasonable risks identified during risk evaluation. This regulation and other pending initiatives at the U.S. state level, as well as initiatives in Canada, Asia and other regions, could potentially require toxicological testing and risk assessments of a wide variety of chemicals, including chemicals used or produced by us. These assessments may result in heightened concerns about the chemicals involved and additional requirements being placed on the production, handling, labeling or use of the subject chemicals. Such concerns and additional requirements could also increase the cost incurred by our customers to use our chemical products and otherwise limit the use of these products, which could lead to a decrease in demand for these products. Such a decrease in demand could have an adverse impact on our business and results of operations.

Our products provide important performance attributes to our customers’ products. If a product fails to perform in a manner consistent with quality specifications or has a shorter useful life than guaranteed, a customer of ours could seek the replacement of the product or damages for costs incurred as a result of the product failing to perform as guaranteed. These risks apply to our refinery catalysts in particular because, in certain instances, we sell our refinery catalysts under agreements that contain limited performance and life cycle guarantees. Also, because many of our products are integrated into our customers’ products, we may be requested to participate in, or fund in whole or in part the costs of, a product recall conducted by a customer. For example, some of our businesses supply products to customers in the automotive industry. In the event one of these customers conducts a product recall that it believes is related to one of our products, we may be asked to participate in, or fund in whole or in part, such a recall.

Our customers often require our subsidiaries to represent that our products conform to certain product specifications provided by our customers. Any failure to comply with such specifications could result in claims or legal action against us. 

A successful claim or series of claims against us could have a material adverse effect on our financial condition and results of operations and could result in our loss of one or more customers.

Our business is subject to hazards common to chemical manufacturing, storage, handling and transportation, as well as natural resource extraction, including explosions, fires, severe weather, natural disasters, mechanical failure, unscheduled downtime, transportation interruptions, remediation, chemical spills, discharges or releases of toxic or hazardous substances or gases and other risks. These hazards can cause personal injury and loss of life to our employees and other persons, severe damage to, or destruction of, property and equipment and environmental contamination. In addition, the occurrence of disruptions, shutdowns or other material operating problems at our facilities due to any of these hazards may diminish our ability to meet our output goals. Accordingly, these hazards and their consequences could adversely affect our reputation and have a material adverse effect on our operations as a whole, including our results of operations and cash flows, both during and after the period of operational difficulties.

The nature of our business, including historical operations at our current and former facilities, exposes us to risks of liability under environmental laws and regulations due to the production, storage, use, transportation and sale of materials that can cause contamination or personal injury if released into the environment. In the jurisdictions in which we operate, we are subject to numerous U.S. and non-U.S. national, federal, state and local environmental, health and safety laws and regulations, including those governing the discharge of pollutants into the air and water, the management and disposal of hazardous substances and wastes and the cleanup of contaminated properties. We currently use, and in the past have used, hazardous substances at many of our facilities, and we have in the past been, and may in the future be, subject to claims relating to exposure to hazardous materials. We also have generated, and continue to generate, hazardous wastes at a number of our facilities. Some of our facilities also have lengthy histories of manufacturing or other activities that may have resulted in site contamination. Liabilities associated with the investigation and cleanup of hazardous substances, as well as personal injury, property damages or natural resource damages arising from the release of, or exposure to, such hazardous substances, may be imposed in many situations without regard to violations of laws or regulations or other fault, and may also be imposed jointly and severally (so that a responsible party may be held liable for more than its share of the losses involved, or even the entire loss). Such liabilities may also be imposed on many different entities, including, for example, current and prior property owners or operators, as well as entities that arranged for the disposal of the hazardous substances. Such liabilities may be material and can be difficult to identify or quantify.

Further, some of the raw materials we handle are subject to government regulation. These regulations affect the manufacturing processes, handling, uses and applications of our products. In addition, our production facilities and a number of our distribution centers require numerous operating permits. Due to the nature of these requirements and changes in our operations, our operations may exceed limits under permits or we may not have the proper permits to conduct our operations. Ongoing compliance with such laws, regulations and permits is an important consideration for us and we incur substantial capital and operating costs in our compliance efforts.

Compliance with environmental laws generally increases the costs of manufacturing, registration/approval requirements, transportation and storage of raw materials and finished products, and storage and disposal of wastes, and could have a material adverse effect on our results of operations. We may incur substantial costs, including fines, damages, criminal or civil sanctions and remediation costs, or experience interruptions in our operations, for violations arising under these laws or permit requirements. Additional information may arise in the future concerning the nature or extent of our liability with respect to identified sites, and additional sites may be identified for which we are alleged to be liable, that could cause us to materially increase our environmental accrual or the upper range of the costs we believe we could reasonably incur for such matters. Furthermore, environmental laws are subject to change and have become increasingly stringent in recent years. We expect this trend to continue and to require materially increased capital expenditures and operating and compliance costs.

In connection with the sale of certain properties and businesses, we have agreed to indemnify the purchasers of such properties for certain types of matters, such as certain breaches of representations and warranties, taxes and certain environmental matters. With respect to environmental matters, the discovery of contamination arising from properties that we have divested may expose us to indemnity obligations under the sale agreements with the buyers of such properties or cleanup obligations and other damages under applicable environmental laws. We may not have insurance coverage for such indemnity obligations or cash flows to make such indemnity or other payments. Further, we cannot predict the nature of and the amount of any indemnity or other obligations we may have to the applicable purchaser. Such payments may be costly and may adversely affect our financial condition and results of operations.

At several of our properties where hazardous substances are known to exist (including some sites where hazardous substances are being investigated or remediated), we believe we are entitled to contractual indemnification from one or more former owners or operators; however, in the event we make a claim, the indemnifier may disagree with us regarding, or not have the financial capacity to fulfill, its indemnity obligation. If our contractual indemnity is not upheld or effective, our accrual and/or our costs for the investigation and cleanup of hazardous substances could increase materially.

The U.S. Foreign Corrupt Practices Act (the “FCPA”) and similar foreign anti-corruption laws in other jurisdictions around the world generally prohibit companies and their intermediaries from making improper payments or providing anything of value to non-U.S. government officials for the purpose of obtaining or retaining business or securing an unfair advantage. We operate in some parts of the world that have experienced governmental corruption to some degree, and, in certain circumstances, strict compliance with anti-bribery laws may conflict with local customs and practices. Although we have established formal policies or procedures for prohibiting or monitoring this conduct, we cannot assure you that our employees or other agents will not engage in such conduct for which we might be held responsible. In the event that we believe or have reason to believe that our employees, agents or distributors have or may have violated applicable anti-corruption laws, including the FCPA, we may be required to investigate or have outside counsel investigate the relevant facts and circumstances, which can be expensive and require significant time and attention from senior management. If we are found to be liable for violations of the FCPA or other applicable anti-corruption laws (either due to our own acts or our inadvertence, or due to the acts or inadvertence of others, including employees of our joint ventures), we could suffer from civil and criminal penalties or other sanctions, which could have a material adverse effect on our business and results of operations.

As first reported in 2018, following receipt of information regarding potential improper payments being made by third partythird-party sales representatives of our Refining Solutions business, within our Catalysts segment, we promptly retained outside counsel and forensic accountants to investigate potential violations of the Company’s Code of Conduct, the FCPA, and other potentially applicable laws. Based on this internal investigation, we have voluntarily self-reported potential issues relating to the use of third partythird-party sales representatives in our Refining Solutions business, within our Catalysts segment, to the U.S. Department of Justice (“DOJ”), the SEC, and the Dutch Public Prosecutor (“DPP”), and are cooperating with the DOJ, the SEC, and the DPP in their review of these matters. In connection with our internal investigation, we have implemented, and are continuing to implement, appropriate remedial measures. We have commenced discussions with the SEC about a potential resolution.

At this time, we are unable to predict the duration, scope, result, or related costs associated with the investigations by the DOJ, the SEC, or DPP.investigations. We also are unable to predict what if any, action may be taken by the DOJ, the SEC, or the DPP, or what penalties or remedial actions they may ultimately seek. Any determination that our operations or activities are not, or were not, in compliance with existing laws or regulations could result in the imposition of fines, penalties, disgorgement, equitable relief, or other losses. An adverse resolution could have a material adverse effect on our results of operations in a particular period.

We are subject to government regulation in non-U.S. jurisdictions in which we conduct our business. The requirements for compliance with these laws and regulations may be unclear or indeterminate and may involve significant costs, including additional capital expenditures or increased operating expenses, or require changes in business practice, in each case that could result in reduced profitability for our business. Our having to comply with these foreign laws or regulations may provide a competitive advantage to competitors who are not subject to comparable restrictions or prevent us from taking advantage of growth opportunities. Determination of noncompliance can result in penalties or sanctions that could also adversely impact our operating results and financial condition.

Protection of our proprietary processes, methods and compounds and other technology is important to our business. We generally rely on patent, trade secret, trademark and copyright laws of the U.S. and certain other countries in which our products are produced or sold, as well as licenses and nondisclosure and confidentiality agreements, to protect our intellectual property rights. The patent, trade secret, trademark and copyright laws of some countries, or their enforcement, may not protect our intellectual property rights to the same extent as the laws of the U.S. Failure to protect our intellectual property rights may result in the loss of valuable proprietary technologies. Additionally, some of our technologies are not covered by any patent or patent application and, even if a patent application has been filed, it may not result in an issued patent. If patents are issued to us, those patents may not provide meaningful protection against competitors or against competitive technologies. We cannot assure you that our intellectual property rights will not be challenged, invalidated, circumvented or rendered unenforceable.

We also conduct research and development activities with third parties and license certain intellectual property rights from third parties and we plan to continue to do so in the future. We endeavor to license or otherwise obtain intellectual property rights on terms favorable to us. However, we may not be able to license or otherwise obtain intellectual property rights on such terms or at all. Our inability to license or otherwise obtain such intellectual property rights could have a material adverse effect on our ability to create a competitive advantage and create innovative solutions for our customers, which will adversely affect our net sales and our relationships with our customers.

We could face patent infringement claims from our competitors or others alleging that our processes or products infringe on their proprietary technologies. If we are found to be infringing on the proprietary technology of others, we may be liable for damages and we may be required to change our processes, redesign our products partially or completely, pay to use the technology of others, stop using certain technologies or stop producing the infringing product entirely. Even if we ultimately prevail in an infringement suit, the existence of the suit could prompt customers to switch to products that are not the subject of infringement suits. We may not prevail in intellectual property litigation and such litigation may result in significant legal costs or otherwise impede our ability to produce and distribute key products.

We also rely upon unpatented proprietary manufacturing expertise, continuing technological innovation and other trade secrets to develop and maintain our competitive position. While we generally enter into confidentiality agreements with our employees and third parties to protect our intellectual property, we cannot assure you that our confidentiality agreements will not be breached, that they will provide meaningful protection for our trade secrets and proprietary manufacturing expertise or that adequate remedies will be available in the event of an unauthorized use or disclosure of our trade secrets or manufacturing expertise. In addition, our trade secrets and know-how may be improperly obtained by other means, such as a breach of our information technologies security systems or direct theft.

Our lithium reserves will, without more, decline as we continue to extract these raw materials. Accordingly, our future profitability depends upon our ability to acquire additional lithium reserves that are economically viable to replace the reserves we will extract. Exploration and development of lithium resources are highly speculative in nature. Exploration projects involve many risks, require substantial expenditures and may not result in the discovery of sufficient additional resources that can be extracted profitably. Once a site with potential resources is discovered, it may take several years of development until production is possible, during which time the economic viability of production may change. Substantial expenditures are required to establish recoverable proven and probable reserves and to construct extraction and production facilities. As a result, there is no assurance that current or future exploration programs will be successful and there is a risk that depletion of reserves will not be offset by discoveries or acquisitions.

We utilize feasibility studies to estimate the anticipated economic returns of an exploration project. The actual project profitability or economic feasibility may differ from such estimates as a result of factors such as, but not limited to, changes in volumes, grades and characteristics of resources to be mined and processed; changes in labor costs or availability of adequate and skilled labor force; the quality of the data on which engineering assumptions were made; adverse geotechnical conditions; availability, supply and cost of water and power; fluctuations in inflation and currency exchange rates; delays in obtaining environmental or other government permits or approvals or changes in the laws and regulations related to our operations or project development; changes in royalty agreements, laws and/or regulations around royalties and other taxes; and weather or severe climate impacts.

For our existing operations, we utilize geological and metallurgical assumptions, financial projections and price estimates. These estimates are periodically updated to reflect changes in our operations, including modifications to our proven and probable reserves and mineralized material, revisions to environmental obligations, changes in legislation and/or social, political or economic environment, and other significant events associated with natural resource extraction operations. There are numerous uncertainties inherent in estimating quantities and qualities of lithium and costs to extract recoverable reserves, including many factors beyond our control, that could cause results to differ materially from expected financial and operating results or result in future impairment charges. In addition, it cannot be assumed that any part or all of the inferred mineral resources will ever be converted into mineral reserves, as defined by the SEC. See Item 2. Properties, for a discussion and quantification of our current mineral resources and reserves.

Our lithium business is significantly dependent on the development and adoption of new applications for lithium batteries and the growth in demand for plug-in hybrid electric vehicles and battery electric vehicles. To the extent that such development, adoption and growth do not occur in the volume and/or manner that we contemplate, including for reasons described under the heading “The development of non-lithium battery technologies could adversely affect us,” above, the long-term growth in the markets for

Our ability to successfully develop our lithium resources, including recently acquiredour 60% interest in MRL’sMARBL’s Wodgina Project,mine, and generate a return on investment will be affected by changes in the demand for and market price of lithium-based end products, such as lithium hydroxide. The market price of these products can fluctuate and is affected by numerous factors beyond our control, primarily world supply and demand. Such external economic factors are influenced by changes in international investment patterns, various political developments and macro-economic circumstances. In addition, the price of lithium products is impacted by their purity and performance. We may not be able to effectively mitigate against such fluctuations.

Following the Wodgina acquisition, we announced that, based on current market conditions, the Wodgina mine would idleidled production of spodumene until market demand supportssupported bringing the mine back into production. There can beIn October 2021, MARBL announced its intention to resume spodumene concentrate production at the Wodgina mine, with the production restart expected during the second quarter of 2022, but there are no assuranceassurances that the market demand for lithium will improve or that the Wodgina mine will be put back into production in the futurethat time frame or at all. Delays in putting the mine into production, as well as continued fluctuations in demand for and pricing of lithium and related products may affect the value of our investment in the Wodgina Project and our value as a whole.

Our success depends on our ability to attract and retain key personnel including our management team. In light of the specialized and technical nature of our business, our performance is dependent on the continued service of, and on our ability to attract and retain, qualified management, scientific, technical, marketing and support personnel. Competition for such personnel is intense, and we may be unable to continue to attract or retain such personnel. In addition, because of our reliance on our senior management team, the unanticipated departure of any key member of our management team could have an adverse effect on our business. Our future success depends, in part, on our ability to identify and develop or recruit talent to succeed our senior management and other key positions throughout the organization. If we fail to identify and develop or recruit successors, we are at risk of being harmed by the departures of these key employees. Effective succession planning is also important to our long-term success. Failure to ensure effective transfer of knowledge and smooth transitions involving key employees could hinder our strategic planning and execution.

As of December 31, 2020,2021, we had approximately 5,9006,000 employees, including employees of our consolidated joint ventures. Approximately 42%46% of these employees are represented by unions or works councils. In addition, a large number of our employees are employed in countries in which employment laws provide greater bargaining or other rights to employees than the laws of the U.S. Such employment rights require us to work collaboratively with the legal representatives of those employees to effect any changes to labor arrangements. For example, most of our employees in Europe are represented by works councils that must approve any changes in conditions of employment, including salaries and benefits and staff changes, and may impede efforts to restructure our workforce. Although we believe that we have a good working relationship with our employees, a strike, work stoppage, slowdown or significant dispute with our employees could result in a significant disruption of our operations or higher labor costs.

We currently participate in a number of joint ventures and may enter into additional joint ventures in the future. The nature of a joint venture requires us to share control with unaffiliated third parties. If our joint venture partners do not fulfill their obligations, the affected joint venture may not be able to operate according to its business plan. In that case, our results of operations may be adversely affected and we may be required to materially change the level of our commitment to the joint venture. Also, differences in views among joint venture participants may result in delayed decisions or failures to agree on major issues. If these differences cause the joint ventures to deviate from their business plans, our results of operations could be adversely affected.

Our capital expenditures generally consist of expenditures to maintain and improve existing equipment, facilities and properties, and substantial investments in new or expanded equipment, facilities and properties. Execution of these capital expenditures can be complex, and commencement of production requires start-up, commission and certification of product quality by our customers, which may impact the expected output and timing of sales of product from such facilities. Construction of large chemical operations is subject to numerous risks and uncertainties, including, among others, the ability to complete a project on a timely basis and in accordance with the estimated budget for such project and our ability to estimate future demand for our products. In addition, our returns on these capital expenditures may not meet our expectations.

Our ability to generate sufficient cash flow from operations or use existing cash balances to make scheduled payments on our debt depends on a range of economic, competitive and business factors, many of which are outside our control. Our business may not generate sufficient cash flow from operations to service our debt obligations. If we are unable to service our debt obligations, we may need to refinance all or a portion of our indebtedness on or before maturity, reduce or delay capital expenditures, sell assets or raise additional equity. We may not be able to refinance any of our indebtedness, sell assets or raise additional equity on commercially reasonable terms or at all, which could cause us to default on our obligations and impair our liquidity. Our inability to generate sufficient cash flow or use existing cash balances to satisfy our debt obligations, or to refinance our obligations on commercially reasonable terms, could have a material adverse effect on our business and financial condition.

Our senior credit facilities and the indentures governing our senior notes contain select restrictive covenants. These covenants provide constraints on our financial flexibility. The failure to comply with these or other covenants governing other indebtedness, including indebtedness incurred in the future, could result in an event of default, which, if not cured or waived, could have a material adverse effect on our business, financial condition and results of operations, including cross-defaults to

Credit rating agencies rate our debt securities on factors that include our operating results, actions that we take, their view of the general outlook for our industry and their view of the general outlook for the economy. Actions taken by the rating agencies can include maintaining, upgrading or downgrading the current rating or placing us on a watch list for possible future downgrades. Downgrading the credit rating of our debt securities or placing us on a watch list for possible future downgrades would likely increase our cost of future financing, limit our access to the capital markets and have an adverse effect on the market price of our securities.

Borrowings under a portion of our debt facilities bear interest at floating rates, and are subject to adjustment based on the ratings of our senior unsecured long-term debt. The downgrading of any of our ratings or an increase in any of the benchmark interest rates would result in an increase of the interest expense on our variable rate borrowings.

We conduct our business and incur costs in the local currency of most of the countries in which we operate. Changes in exchange rates between foreign currencies and the U.S. Dollar will affect the recorded levels of our assets, liabilities, net sales, cost of goods sold and operating margins and could result in exchange losses. The primary currencies to which we have exposure are the E.U. Euro, Japanese Yen, Chinese Renminbi, Australian Dollar and Chilean Peso. Exchange rates between

Our effective tax rate and related tax balance sheet attributes could be impacted by changes in tax legislation throughout the world. Currently, the majority of our net sales are generated from customers located outside the U.S., and a substantial portion of our assets and employees are located outside of the U.S.

We have not accrued income taxes or foreign withholding taxes on undistributed earnings for most non-U.S. subsidiaries, because those earnings are intended to be indefinitely reinvested in the operations of those subsidiaries. Certain tax proposals with respect to such earnings could substantially increase our tax expense, which would substantially reduce our income and have a material adverse effect on our results of operations and cash flows from operating activities.

Our future effective tax rates could be affected by changes in the mix of earnings in countries with differing statutory tax rates, expirations of tax holidays or rulings, changes in the assessment regarding the realization of the valuation of deferred tax assets, or changes in tax laws and regulations or their interpretation. Recent developments, including the European Commission’s investigations on illegal state aid, as well as the Organisation for Economic Co-operation and Development (“OECD”) project on Base Erosion and Profit Shifting may result in changes to long-standing tax principles, which could adversely affect our effective tax rates or result in higher cash tax liabilities.

We are subject to the regular examination of our income tax returns by various tax authorities. Examinations in material jurisdictions or changes in laws, rules, regulations or interpretations by local taxing authorities could result in impacts to tax years open under statute or to foreign operating structures currently in place. We regularly assess the likelihood of adverse outcomes resulting from these examinations or changes in laws, rules, regulations or interpretations to determine the adequacy of our provision for taxes. It is possible the outcomes from these examinations will have a material adverse effect on our financial condition and operating results.

Under the terms of certain purchase agreements, third party sellers have agreed to substantially indemnify us for tax liabilities pertaining to periods prior to our 2015 acquisition of Rockwood Holdings Inc. (“Rockwood”). These indemnity obligations will continue generally until the applicable statutes of limitations expire. To the extent that such companies fail to indemnify or satisfy their obligations, or if any amount is not covered by the terms of the indemnity, our earnings could be negatively impacted in future periods through increased tax expense.

We evaluate our ability to utilize deferred tax assets and our need for valuation allowances based on available evidence. This process involves significant management judgment about assumptions that are subject to change from period to period based on changes in tax laws or variances between future projected operating performance and actual results. We are required to establish a valuation allowance for deferred tax assets if we determine, based on available evidence at the time the determination is made, that it is more likely than not that some portion or all of the deferred tax assets will not be utilized. In making this determination, we evaluate all positive and negative evidence as of the end of each reporting period. Future adjustments (either increases or decreases), to the deferred tax asset valuation allowance are determined based upon changes in the expected realization of the net deferred tax assets. The utilization of our deferred tax assets ultimately depends on the existence of sufficient taxable income in either the carry-back or carry-forward periods under the applicable tax law. Due to significant estimates used to establish the valuation allowance and the potential for changes in facts and circumstances, it is reasonably possible that we will be required to record adjustments to the valuation allowance in future reporting periods. Changes to the valuation allowance or the amount of deferred tax liabilities could have a materially adverse effect on our business, financial condition and results of operations. Further, should we change our assertion regarding the permanent reinvestment of the undistributed earnings in foreign operations, a deferred tax liability may need to be established.

We are involved from time to time in legal and regulatory proceedings, which may be material in the future. The outcome of proceedings, lawsuits and claims may differ from our expectations, leading us to change estimates of liabilities and related insurance receivables.

Legal and regulatory proceedings, whether with or without merit, and associated internal investigations, may be time-consuming and expensive to prosecute, defend or conduct, may divert management’s attention and other resources, inhibit our ability to sell our products, result in adverse judgments for damages, injunctive relief, penalties and fines, and otherwise negatively affect our business.

A significant portion of our operations is conducted through our subsidiaries and joint ventures. As a result, our ability to service our debt may be partially dependent on the earnings of our subsidiaries and joint ventures and the payment of those earnings to us in the form of dividends, loans or advances and through repayment of loans or advances from us. Payments to us by our subsidiaries and joint ventures are contingent upon our subsidiaries’ or joint ventures’ earnings and other business considerations and may be subject to statutory or contractual restrictions. In addition, there may be significant tax and other legal restrictions on the ability of our non-U.S. subsidiaries or joint ventures to remit money to us.

We have several defined benefit pension plans around the world, including in the U.S., U.K., Germany, Belgium and Japan. We are required to make cash contributions to our pension plans to the extent necessary to comply with minimum funding requirements imposed by the various countries’ benefit and tax laws. The amount of any such required contributions will be determined annually based on an actuarial valuation of the plans as performed by the plans’ actuaries.

In previous years, we have made voluntary contributions to our U.S. qualified defined benefit pension plans. We anticipate approximately $24$10 million of required cash contributions during 20212022 for our defined benefit pension plans. Additional voluntary pension contributions in and after 20212022 may vary depending on factors such as asset returns, interest rates, and legislative changes. The amounts we may elect or be required to contribute to our pension plans in the future may increase significantly. These contributions could be substantial and would reduce the cash available for our business.

Further, an economic downturn or recession or market disruption in the capital and credit markets may adversely impact the value of our pension plan assets, our results of operations, our statement of changes in stockholders’ equity and our liquidity. Our funding obligations could change significantly based on the investment performance of the pension plan assets and changes in actuarial assumptions for local statutory funding valuations. Any deterioration of the capital markets or returns available in such markets may negatively impact our pension plan assets and increase our funding obligations for one or more of these plans and negatively impact our liquidity. We cannot predict the impact of this or any further market disruption on our pension funding obligations.

We believe that our customers are increasingly looking for strong, long-term relationships with a few key suppliers that help them improve product performance, reduce costs, and support new product development. To satisfy these growing customer requirements, our competitors have been consolidating within product lines through mergers and acquisitions.

As part of our business growth strategy, we have acquired businesses and entered into joint ventures in the past and intend to pursue acquisitions and joint venture opportunities in the future. Our ability to implement this component of our growth strategy will be limited by our ability to identify appropriate acquisition or joint venture candidates and our financial resources, including available cash and borrowing capacity. The expense incurred in consummating acquisitions or entering into joint ventures, the time it takes to integrate an acquisition or our failure to integrate businesses successfully, could result in unanticipated expenses and losses. Furthermore, we may not be able to realize any of the anticipated benefits from acquisitions or joint ventures.

We have historically expanded our business primarily through acquisitions. A part of our business strategy is to continue to grow through acquisitions that complement our existing technologies and accelerate our growth. Our credit facilities have limited financial maintenance covenants. In addition, the indenture and other agreements governing our senior notes do not limit our ability to incur additional indebtedness in connection with acquisitions or otherwise. As a result, we may incur substantial additional indebtedness in connection with acquisitions.

Attempts to gain unauthorized access to our information technology systems become more sophisticated over time. These attempts, which might be related to industrial or other espionage, include covertly introducing malware to our computers and

In addition, risks associated with information technology systems failures or network disruptions, including risks associated with upgrading our systems or in successfully integrating information technology and other systems in connection with the integration of businesses we acquire, could disrupt our operations by impeding our processing of transactions, financial reporting and our ability to protect our customer or company information, which could adversely affect our business and results of operations.

Chemical-related assets may be at greater risk of future terrorist attacks than other possible targets in the U.S. and around the world. As a result, we are subject to existing federal rules and regulations (and may be subject to additional legislation or regulations in the future) that impose site security requirements on chemical manufacturing facilities, which increase our overhead expenses.

We are also subject to federal regulations that have heightened security requirements for the transportation of hazardous chemicals in the U.S. We believe we have met these requirements but additional federal and local regulations that limit the distribution of hazardous materials are being considered. We ship and receive materials that are classified as hazardous. Bans on movement of hazardous materials through cities, like Washington, D.C., could affect the efficiency of our logistical operations. Broader restrictions on hazardous material movements could lead to additional investment to produce hazardous raw materials and change where and what products we manufacture.

The Chemical Facility Anti-Terrorism Standards program (“CFATS Program”), which is administered by the Department of Homeland Security (“DHS”), identifies and regulates chemical facilities to ensure that they have security measures in place to reduce the risks associated with potential terrorist attacks on chemical plants located in the U.S. In December 2014, the Protecting and Securing Chemical Facilities from Terrorist Attacks Act of 2014 (“CFATS Act”) was enacted. DHS has enacted new rules under the CFATS Program that imposes comprehensive federal security regulations for high-risk chemical facilities in possession of specified quantities of chemicals of interest. This rule establishes risk-based performance standards for the security of the U.S.'s chemical facilities. It requires covered chemical facilities to prepare Security Vulnerability Assessments, which identify facility security vulnerabilities, and to develop and implement Site Security Plans, which include measures that satisfy the identified risk-based performance standards. We have implemented all necessary changes to comply with the rules under the CFATS Program to date, however, we cannot determine with certainty any future costs associated with any additional security measures that DHS may require.

The occurrence of extraordinary events, including future terrorist attacks and the outbreak or escalation of hostilities, cannot be predicted, and their occurrence can be expected to continue to negatively affect the economy in general, and the markets for our products in particular. The resulting damage from a direct attack on our assets, or assets used by us, could include loss of life and property damage. In addition, available insurance coverage may not be sufficient to cover all of the damage incurred or, if available, may be prohibitively expensive.

The COVID-19 pandemic has created significant uncertainty and economic disruption. TheWhile we have not experienced a material impact to date, the ultimate extent to which it impacts our business, results of operations, financial position, and cash flows is difficult to predict and dependent upon many factors over which we have no control. These factors include, but are not limited to, the duration and severity of the pandemic;pandemic, including from the discovery of new strain variants; government restrictions on businesses and individuals; the health and safety of our employees and communities in which we do business; the impact of the pandemic on our customers' businesses and the resulting demand for our products; the impact on our suppliers and supply chain network; the impact on U.S. and global economies and the timing and rate of economic recovery; and potential adverse effects on the financial markets.

The occurrence of natural disasters, such as hurricanes, floods or earthquakes; pandemics, such as the recent outbreak of COVID-19; or other unanticipated catastrophes at any of the locations in which we or our key partners, suppliers and customers do business, could cause interruptions in our operations. Historically, major hurricanes have caused significant disruption to the operations on the U.S. Gulf Coast for many of our customers and our suppliers of certain raw materials, which had an adverse impact on volume and cost for some of our products. Our operations in Chile could be subject to significant rain events and earthquakes, and our operations in Asia could be subject to weather events such as typhoons. A global or regional pandemic or similar outbreak in a region of our, our customers, or our suppliers could disrupt business. If similar or other weather events, natural disasters, or other catastrophe events occur in the future, they could negatively affect the results of operations at our sites in the affected regions as well as have adverse impacts on the global economy.

We maintain property, business interruption, casualty, and other insurance, but such insurance may not cover all risks associated with the hazards of our business and is subject to limitations, including deductibles and coverage limits. We may incur losses beyond the limits, or outside the coverage, of our insurance policies, including liabilities for environmental remediation. In addition, from time to time, various types of insurance for companies in the specialty chemical industry have not been available on commercially acceptable terms or, in some cases, have not been available at all. We are potentially at additional risk if one or more of our insurance carriers fail. Additionally, severe disruptions in the domestic and global financial markets could adversely impact the ratings and survival of some insurers. Future downgrades in the ratings of enough insurers could adversely impact both the availability of appropriate insurance coverage and its cost. In the future, we may not be able to obtain coverage at current levels, if at all, and our premiums may increase significantly on coverage that we maintain.

Growing concerns about climate change may result in the imposition of additional regulations or restrictions to which we may become subject. Climate changes include changes in rainfall and in storm patterns and intensities, water shortages, significantly changing sea levels and increasing atmospheric and water temperatures, among others. For example, there have been concerns regarding the declining water level of the Dead Sea, from which our joint venture, JBC, produces bromine. A number of governments or governmental bodies have introduced or are contemplating regulatory changes in response to climate change, including regulating greenhouse gas emissions. Potentially, additional U.S. federal regulation will be forthcoming with respect to greenhouse gas emissions (including carbon dioxide) and/or “cap and trade” legislation that could impact our operations. In addition, we have operations in the E.U., Brazil, China, Japan, Jordan, Saudi Arabia, Singapore and the United Arab Emirates, which have implemented, or may implement, measures to achieve objectives under the 2015 Paris Climate Agreement, an international agreement linked to the United Nations Framework Convention on Climate Change (“UNFCC”), which set targets for reducing greenhouse gas emissions.

The outcome of new legislation or regulation in the U.S. and other jurisdictions in which we operate may result in new or additional requirements, additional charges to fund energy efficiency activities, and fees or restrictions on certain activities. While certain climate change initiatives may result in new business opportunities for us in the area of alternative fuel technologies and emissions control, compliance with these initiatives may also result in additional costs to us, including, among other things, increased production costs, additional taxes, reduced emission allowances or additional restrictions on production or operations. Any adopted future climate change regulations could also negatively impact our ability to compete with companies situated in areas not subject to such limitations. Even without such regulation, increased public awareness and adverse publicity about potential impacts on climate change emanating from us or our industry could harm us. We may not be able to recover the cost of compliance with new or more stringent laws and regulations, which could adversely affect our business and negatively impact our growth. Furthermore, the potential impact of climate change and related regulation on our customers is highly uncertain and there can be no assurance that it will not have an adverse effect on our financial condition and results of operations.

NONE

We operate globally, with our principal executive offices located in Charlotte, NCNorth Carolina and regional shared services offices located in Budapest, Hungary and Dalian, China. AllEach of these properties are leased. We and our affiliates also operate regional sales and administrative offices in various locations throughout the world, which are generally leased.

We believe that our production facilities, research and development facilities, and sales and administrative offices are generally well maintained, effectively used and are adequate to operate our business. During 2020,2021, the Company’s manufacturing plants operated at approximately 88%86% capacity, in the aggregate.

Set forth below are details regarding our significant mineral properties operated by us and our affiliates which have been prepared in accordance with Industry Guide 7the requirements of subpart 1300 of Regulation S-K, issued by the Securities and Exchange Commission (“SEC”). In 2018, the SEC adopted new rules relating to property disclosures by companies with significant mining operations, effective for the year beginning January 1, 2021. Thus, the Company will not be required to comply with the SEC’s new mining operation disclosure rules until the earlier of its next filing of a registration statement under the Securities Act of 1933, or the filing of itsAs used in this Annual Report on Form 10-K, for the year ending December 31, 2021. The Company does not have current estimates of proven or probable reserves for its significant mining properties as defined by Industry Guide 7 as of this filing. However, the Company is in the process of developing these reserve estimates in accordance with the new mining operation rules adopted by the SEC.

About 55% of the tenements held by Talison are covered by Western Australia’s State Forest, which is under the authority of the Western Australia Department of Biodiversity, Conservation and Attractions. The majority of the remaining land is private land that covers about 40% of the surface rights. The remaining ground comprises crown land, road reserves and other miscellaneous reserves. The tenements cover a total area of approximately 10,000 hectares and include the historic Greenbushes tin, tantalum and current lithium mining areas. See section 3 of the Greenbushes technical report summary, filed as Exhibit 96.1 to this report, for a listing of tenements held by the Greenbushes site. Talison holds the mining rights for all lithium minerals on these tenements. The operating open pit lithium mining and processing plant area covers approximately 2,000 hectares comprising three mining leases. All lithium mining activities, including tailings storage, processing plant operations, open pits and waste rock dumps, are currently carried out within the boundaries of the three mining leases plus two general purpose leases. In order to keep the granted tenements in good standing, Talison is required to maintain permits, make an annual contribution to the statutory Mining Rehabilitation Fund and pay a royalty on concentrate sales for lithium mineral production as prescribed under the Mining Act

The Greenbushes deposit consists of a main, rare-metal zoned pegmatite body, with numerous smaller footwall pegmatite dykes and pods. The primary intrusion and its subsidiary dykes and pods are concentrated within shear zones on the boundaries of granofels, ultramafic schists and amphibolites. The pegmatites are crosscut by ferrous-rich, mafic dolerite which is of paramount importance to the currant mining methods. The pegmatite body is over 3 km long (north by northwest), up to 300 meters wide (normal to dip), strikes north to northwest and dips moderately to steeply west to southwest.

The major minerals from the Greenbushes pegmatite are quartz, spodumene, albite and K-feldspar. The main lithium-bearing minerals are spodumene (containing approximately 8% lithium oxide) and varieties kunzite and hiddenite. Minor to trace lithium minerals include lepidolite mica, amblygonite and lithiophilite. Lithium is readily leached in the weathering environment and thus is virtually non-existent in weathered pegmatite. Exploration drilling at Greenbushes has been ongoing for over 40 years, including drilling in 2020, using reverse circulation and diamond drill holes.

Three lithium mineral processing plants are currently operating on the Greenbushes site, two chemical grade plants and a technical grade plant. Tailings are discharged to the tailings storage facility without the need for any neutralization process. Additional infrastructure on site includes power and water supply facilities, a laboratory, administrative offices, occupational health/safety/training offices, dedicated mines rescue area, stores, storage sheds, workshops and engineering offices. The Greenbushes site also leases production drills, excavators, trucks and various support equipment to extract the ore deposit by open pit methods. Talison’s power is delivered by a local distribution system and reticulated and metered within the site. Water is sourced from rainfall and stored in several process dams located on site. We consider the condition of all of our plants, facilities and equipment to be suitable and adequate for the businesses we conduct, and we maintain them regularly. As of December 31, 2020,2021, our 49% ownership interest of the gross asset value of the facilities at the Greenbushes site was approximately $789$415.6 million. During 2020, 88,000 metric tons of lithium carbonate equivalent (“LCE”) of lithium concentrate were produced at the Greenbushes facilities. Talison currently sells the lithium concentrate only to its shareholders.

Talison ships the chemical-grade lithium concentrate in vessels to our facilities in Meishan and Xinyu, China to process into battery-grade lithium hydroxide. In addition, the output from Talison can be used by tolling entities in China to produce both lithium carbonate and lithium hydroxide. See

A summary of the Greenbushes facility’s lithium mineral resources and reserves as of December 31, 2021 are shown in the following tables. This is the first period estimated mineral resources, exclusive of reserves, and reserves have been developed for Greenbushes since being acquired by Albemarle. SRK Consulting (U.S.) Inc. (“SRK”), a descriptionthird-party firm comprising mining experts in accordance with Item 1302(b)(1) of our facilitiesRegulation S-K, served as the QP and prepared the estimates

The Salar de Atacama is a salt flat, the largest in Chile, located in the Atacama desert in northern Chile, which is the driest place on the planet and thus has an extremely high annual rate of evaporation and extremely low annual rainfall. Our extraction through evaporation process works as follows: snow in the Andes Mountains melts and flows into underground pools of water containing brine, which generally have high concentrations of lithium. We then pump the water containing brine above ground through a series of pumps and wells into a network of large evaporation ponds. Over the course of approximately eighteen months, the desert sun evaporates the water causing other salts to precipitate and leaving behind concentrated lithium brine. If weather conditions are not favorable, the evaporation process may be prolonged. After we obtain the lithium brine from the Salar de Atacama, we process it into lithium carbonate and lithium chloride at our manufacturing facilities in nearby La Negra, Chile.

The filling materials of the Salar de Atacama Basin are dominated by the Vilama Formation and the more recently, in geologic time, by evaporitic and clastic materials that are currently being deposited in the basin. These units house the basin's aquifer system and are composed of evaporitic chemical sediments that include carbonate, gypsum and halite intervals interrupted by volcanic deposits of large sheets of ignimbrite, volcanic ash and smaller classical deposits. Lithium-rich brines are extracted from the halite aquifer that is located within the nucleus of the salt flat. The Salar de Atacama basin contains a continental system of lithium-rich brine. These types of systems have six common (global) characteristics: arid climate; closed basin that contains a salt flat (salt crust), a salt lake, or both; igneous and/or hydrothermal activity; tectonic subsidence; suitable sources of lithium; and sufficient time to concentrate the lithium in the brine.

In the Salar de Atacama basin, lithium-rich brines are found in a halite aquifer. Carbonate and sulfates are found near the edges of the basin. The average, minimum and maximum concentrations of lithium in the Salar de Atacama basin are approximately 1,400, 900 and 7,000 mg/L, respectively. From 2017 through 2019, two drilling campaigns were carried out in order to obtain geological and hydrogeological information at the Albemarle mining concession.

The facilities at the Salar de Atacama consist of extraction wells, evaporation and concentration ponds, leaching plants, a potash plant, a drying floor,plant, services and general areas, including salt stockpiles, as well as a fleet of owned and leased equipment. In addition, the site includes administrative offices, an operations building and a laboratory. The extracted concentrated lithium brine is sent to the La Negra plant by truck for processing. The Salar de Atacama has its own powerhouse that generates the energy necessary for the entire operation of the facilities. We also have permanent and continuous groundwater exploitation rights for two wells that are for industrial use and to supply the Salar de Atacama facilities. The La Negra facilities consist of a boron removal plant, a calcium and magnesium removal plant, two lithium carbonate conversion plants, a lithium chloride plant, evaporation-sedimentation ponds, an offsite area where the raw materials are housed and the inputs that are used in the process are prepared, a dry area where the various products are prepared, as well as a fleet of owned and leased equipment. La Negra is supplied electricity from a local company and has rights to a well in the Peine community for its water supply. We are currently constructing a third lithium carbonate conversion plant expected to be completed mid-2021, followed by a six-month commissioning and qualification process. We consider the condition of all of our plants, facilities and equipment to be suitable and adequate for the businesses we conduct, and we maintain them regularly. As of December 31, 2020,2021, the combined gross asset value of our facilities at the Salar de Atacama and in La Negra, Chile (not inclusive of construction in process) was approximately $863$941.9 million. During 2020, we produced 42,000 metric tons

A summary of LCEthe Salar de Atacama facility’s lithium mineral resources and reserves as of primarilyDecember 31, 2021 are shown in the following tables. This is the first period estimated mineral resources (exclusive of reserves) and reserves have been developed for Salar de Atacama. SRK served as the QP and prepared the estimates of lithium carbonatemineral resources and reserves at our La Negra facilities.

The Silver Peak site (latitude 37.751773°N, longitude 117.639027°W) is located in a rural area approximately 30 miles southwest of Tonopah, in Esmeralda County, Nevada. It is located in the Clayton Valley, an arid valley historically covered with dry lake beds (playas). The operation borders the small unincorporated town of Silver Peak, Nevada. Albemarle uses the Silver Peak site for the production of lithium brines, which are used to make lithium carbonate and, to a lesser degree, lithium hydroxide. Access to the site is off of the paved highway SR-265 in the town of Silver Peak, Nevada. The administrative offices are located on the south side of the road. The process facility is on the north side of the road and the brine operations are located approximately three miles east of Silver Peak on Silver Peak Road and occupy both the north and south sides of the road. In addition, access to the site is also possible via gravel/dirt roads from Tonopah, Nevada and Goldfield, Nevada.

Lithium brine extraction in the Clayton Valley began in the mid-1960’s by one of our predecessors, the Foote Mineral Company. Since that time, lithium brine operations have been operated on a continuous basis. In 1998, Chemetall purchased Foote Mineral Company. Subsequently, in 2004, Chemetall was acquired by Rockwood, and in 2015, Rockwood was acquired by Albemarle. Our mineral rights in Silver Peak consist of our right to access lithium brine pursuant to our permitted and certified senior water rights, a settlement agreement with the U.S. government, originally entered into in June 1991, and our patented and unpatented land claims. Pursuant to the 1991 agreement, our water rights and our land claims, we have rights to all lithium that we can remove economically from the Clayton Valley Basin in Nevada. See section 3 of the Silver Peak technical report summary, filed as Exhibit 96.4 to this report, for a listing of patented and unpatented claims at the Silver Peak site. We have been operating at the Silver Peak site since 1966. Our Silver Peak site covers a surface of over 13,500 acres, more than 10,500 acres of which we own through a subsidiary. The remaining acres are owned by the U.S. government from whom we lease the land pursuant to unpatented land claims that are renewed annually. Actual surface disturbance associated with the operations is 7,390 acres, primarily associated with the evaporation ponds. The manufacturing and administrative activities are confined to an area approximately 20 acres in size.

We extract lithium brine from our Silver Peak site through substantially the same evaporation process we use at the Salar de Atacama. We process the lithium brine extracted from our Silver Peak site into lithium carbonate at our plant in Silver Peak. It is hypothesized that the current levels of lithium dissolved in brine originate from relatively recent dissolution of halite by meteoric waters that have penetrated the playa in the last 10,000 years. The halite formed in the playa during the aforementioned climatic periods of low precipitation and that the concentrated lithium was incorporated as liquid inclusions into the halite crystals. There are no current exploration activities on the Silver Peak lithium operation. However, in January 2021, we announced that we will expand capacity in Silver Peak and begin a program to evaluate clays and other available Nevada resources for commercial production of lithium. Beginning in 2021, we plan to invest $30 million to $50 million to double the current production in Silver Peak by 2025, with the aim of making full use of the brine water rights.

The facilities at Silver Peak consist of extraction wells, evaporation and concentration ponds, a lithium carbonate plant, a lithium anhydrous plant, a lithium hydroxide plant, a liming plant, wellfield and mill maintenance, a shipping and packaging facility and administrative offices, as well as a fleet of owned and leased equipment. Silver Peak is supplied electricity from a local company and we currently have two operating fresh water wells nearby that supply water to the facilities. We consider the condition of all of our plants, facilities and equipment to be suitable and adequate for the businesses we conduct, and we maintain them regularly. As of December 31, 2020,2021, the gross asset value of our facilities at our Silver Peak site was approximately $55$60.8 million. During 2020, we produced approximately 2,200 metric tons

A summary of LCEthe Silver Peak facility’s lithium mineral resources and reserves as of December 31, 2021 are shown in the following tables. This is the first period estimated mineral resources and reserves have been developed for Silver Peak. SRK served as the QP and prepared the estimates of lithium carbonatemineral resources (exclusive of reserves) and reserves at ourthe Silver Peak facilities.

Magnolia is located in the southwest Arkansas, north of the center of Columbia County, approximately 50 miles east of Texarkana and 135 miles south of Little Rock. Our facilities include two separate production plants, the South Plant and the West Plant. The South Plant (latitude 33.1775°N, longitude 93.2161°W) is accessible via U.S. Route 79 and paved local roads. The West Plant (latitude 33.2648°N, longitude 93.3151°W) is accessible by U.S. Route 371 and paved local roads. The decentralized well sites around the brine fields are accessed via paved Arkansas Highway 19, 98, 160 and 344.

In Magnolia, bromine is recovered from underground brine wells and then processed into a variety of end products at the plant on location. Albemarle has a total of 25more than 50 brine production wells and 35 production brine injection wells that are currently active on the property. Albemarle’s area of bromine operation is comprised of over 9,500 individual leases with local landowners comprising a total area of over 98,50099,500 acres. The leases have been acquired over time as field development extended across the field. Each lease continues for a period of 25 years or longer until after a two year period where brine is not injected or produced from/to a well within two miles of lease land areas, as long as lease rentals are continuing to be paid. See section 3 of the Magnolia technical report summary, filed as Exhibit 96.6 to this report, for a map of leases and burdens on those leases at the Magonlia site.

Bromine extraction began in Magnolia in 1965 as the first brine supply well was drilled, and additional wells were put into production over the next few years. In 1987, a predecessor company took over operations of certain brine supply and injection wells, which Albemarle continues to operate to this day. In 2019, Albemarle completed, and put into production, two new brine production supply wells in Magnolia.

In Magnolia, bromine exists as sodium bromide in the formation waters or brine of the Jurassic age Smackover Formation, a geological formation in Arkansas, in the subsurface at 7,000 to 8,500 feet below sea level. The mineralization occurs within the highly saline Smackover Formation waters or brine where the bromide has an abnormally rich composition. The bromine concentration is more than twice as high as that found in normal evaporated sea water. The bromine mineralization of the brine is distributed throughout the porous intervals of the upper and middle Smackover on the property. The strong permeability and porosity of the Smackover grainstones provide excellent continuity of the bromine mineralization within the brine.

The facilities at Magnolia consist of brine production and injection wells, brine ponds, two bromine processing plants, pipelines between the plants and wells, a laboratory, storage and warehouses, administrative offices, as well as a fleet of owned and leased equipment. Our Magnolia facilities are supplied electricity from a local company and we currently have several operating freshwater wells nearby that supply water to the facilities. In addition, both plants have dedicated rail spurs that provide access to several rail lines to transport product throughout the country. We consider the condition of all of our plants, facilities and equipment to be suitable and adequate for the businesses we conduct, and we maintain them regularly. As of December 31, 2021, the gross asset value of our facilities at our Magnolia site was approximately $772.8 million.

A summary of the Magnolia facility’s bromine mineral reserves as of December 31, 2020,2021 are shown in the gross asset valuefollowing table. This is the first period estimated mineral reserves have been developed for Magnolia. RPS served as the QP and prepared the estimates of our facilitiesbromine mineral reserves at ourthe Magnolia site was approximately $747 million. During 2020, we produced approximately 74,000 metric tonsfacility, with an effective date of December 31, 2021. A copy of the QP’s technical report summary with respect to the bromine mineral resource and reserve estimates at the Magnolia facility, dated January 27, 2022, is filed as Exhibit 96.6 to this report. The amounts represent Albemarle’s attributable portion based on a 100% ownership percentage, and are presented as MT in thousands.

We are involved in litigation incidental to our business and are a party to a number of legal actions and claims, various governmental proceedings and private civil lawsuits, including, but not limited to, those related to environmental and hazardous material exposure matters, product liability, and breach of contract. Some of the legal proceedings include claims for compensatory as well as punitive damages. While the final outcome of these matters cannot be predicted with certainty, considering, among other things, the legal defenses available and liabilities that have been recorded along with applicable insurance, it is currently the opinion of management that none of these pending items will have a material adverse effect on our financial condition, results of operations or liquidity.

As first reported in 2018, following receipt ofIn addition, the information regarding potential improper payments being made by third party sales representatives of our Refining Solutions business, within our Catalysts segment, we promptly retained outside counselset forth under Note 17, “Commitments and forensic accountants to investigate potential violations of the Company’s Code of Conduct, the FCPA, and other potentially applicable laws. Based on this internal investigation, we have voluntarily self-reported potential issues relatingContingencies – Litigation” to the useConsolidated Financial Statements of third party sales representatives in our Refining Solutions business, within our Catalysts segment, to the DOJ, the SEC, and DPP, and are cooperating with the DOJ, the SEC, and DPP in their review of these matters. In connection with our internal investigation, we have implemented, and are continuing to implement, appropriate remedial measures.

An unexpected adverse resolution of one or more of these items, however, could have a material adverse effect on our financial condition, results of operations or liquidity in that particular period.

Executive Officers of the Registrant.

The names, ages and biographies of our executive officers, as of February 19, 2021,18, 2022, are set forth below. The term of office of each officer is until the meeting of the Board of Directors following the next annual shareholders’ meeting in May 2021.2022.

Our common stock trades on the New York Stock Exchange (“NYSE”) under the symbol “ALB.” There were 116,632,439117,036,615 shares of common stock held by 2,2792,180 shareholders of record as of February 12, 2021.11, 2022. We expect to continue to declare and pay dividends to our shareholders in the future, however, dividends are declared solely at the discretion of our Board of Directors and there is no guarantee that the Board of Directors will continue to declare dividends in the future.

Stock Performance Graph

The graph below shows the cumulative total shareholder return assuming the investment of $100 in our common stock on December 31, 20152016 and the reinvestment of all dividends thereafter. The information contained in the graph below is furnished and therefore not to be considered “filed” with the SEC, and is not incorporated by reference into any document that incorporates this Annual Report on Form 10-K by reference.

Forward-looking Statements

Some of the information presented in this Annual Report on Form 10-K, including the documents incorporated by reference, may constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Such forward-looking statements are based on our current expectations, which are in turn based on assumptions that we believe are reasonable based on our current knowledge of our business and operations. We have used words such as “anticipate,” “believe,” “could,” “estimate,” “expect,” “intend,” “may,” “should,” “would,” “will” and variations of such words and similar expressions to identify such forward-looking statements.

These forward-looking statements are not guarantees of future performance and involve certain risks, uncertainties and assumptions, which are difficult to predict and many of which are beyond our control. There can be no assurance that our actual results will not differ materially from the results and expectations expressed or implied in the forward-looking statements. Factors that could cause actual results to differ materially from the outlook expressed or implied in any forward-looking statement include, without limitation, information related to:

Secular trends favorably impacting demand within the end markets that we serve combined with our diverse product portfolio, broad geographic presence and customer-focused solutions will continue to be key drivers of our future earnings growth. We continue to build upon our existing green solutions portfolio and our ongoing mission to provide innovative, yet commercially viable, clean energy products and services to the marketplace to contribute to our sustainable revenue. For example, our Lithium business contributes to the growth of clean miles driven with electric miles and more efficient use of renewable energy through grid storage; Bromine Specialties enables the prevention of fires starting in electronic equipment, greater fuel efficiency from rubber tires and the reduction of emissions from coal fired power plants; and the Catalysts business creates efficiency of natural resources through more usable products from a single barrel of oil, enables safer, greener production of alkylates used to produce more environmentally-friendly fuels, and reduced emissions through cleaner transportation fuels. We believe our disciplined cost reduction efforts and ongoing productivity improvements, among other factors, position us well to

The current global business environment presents a diverse set of opportunities and challenges in the markets we serve. In particular, the market for lithium battery and energy storage, particularly that for EVs,electric vehicles (“EVs”), remains strong,

Currently,While global economic conditions have been improving, the COVID-19 pandemic is havingcontinues to have an impact on overall global economic conditions. While weglobally. We have not seen a material impact to our operations to date, however, the ultimate impact on our business will depend on the length and severity of the outbreak throughout the world. All of our information technology systems are running as designed and all sites are operating at normal capacity while we continue to comply with all government and health agency recommendations and requirements, as well as protecting the safety of our employees and communities. We believe we have sufficient inventory to continue to produce at current levels, however, government mandated shutdowns could impact our ability to acquire additional materials and disrupt our customers’ purchases. At this time we cannot predict the expected overall financial impact of the COVID-19 pandemic on our business, but we are planning for various economic scenarios and continue to make efforts to protect the safety of our employees and the health of our business.

We also announced agreements for strategic investments in China with plans to build two lithium hydroxide conversion plants, each initially targeting 50,000 metric tons per year. Subject to additional studies and approvals, it is expected these plants would start construction during 2022 and complete construction by the end of 2024. In addition, our 60%-owned MARBL joint venture recently announced its intention to resume spodumene concentrate production at the Wodgina spodumene mine, with the production restart expected during the second quarter of 2020,2022. In February 2022, we announced that we signed a non-binding letter agreement with full year 2020 showingour MARBL joint venture partner, MRL, to explore a healthy increasepotential expansion of the MARBL joint venture, in total EV sales over the prior year. We continuean effort to keep the Wodgina spodumene mine idled until demand supports bringing the mine back to production.expand lithium conversion capacity with increased optionality and reduced risk.

On a longer-term basis, we believe that demand for lithium will continue to grow as new lithium applications advance and the use of plug-in hybrid electric vehicles and full battery electric vehicles increases. This demand for lithium is supported by a favorable backdrop of steadily declining lithium ion battery costs, increasing battery performance, continuing significant investments in the battery and EV supply chain by our customerscathode and battery producers, and automotive OEM’s, favorable global public policy toward e-mobility/renewable energy usage, and additional stimulus measures taken in Europe in light of the COVID-19 pandemic that we expect to bolsterstrengthen EV demand. Our outlook is also bolstered by long-term supply agreements with key strategic customers, reflecting our standing as a preferred global lithium partner, highlighted by our scale, access to geographically diverse, low-cost resources and long-term track record of reliability of supply and operating execution.

On a longer-term basis, we continue to believe that improving global standards of living, widespread digitization, increasing demand for data management capacity and the potential for increasingly stringent fire safety regulations in

On a longer-term basis, we believe increased global demand for transportation fuels, new refinery start-ups and ongoing adoption of cleaner fuels will be the primary drivers of growth in our Catalysts business. We believe delivering superior end-use performance continues to be the most effective way to create sustainable value in the refinery catalysts industry. We also believe our technologies continue to provide significant performance and financial benefits to refiners challenged to meet tighter regulations around the world, including those managing new contaminants present in North America tight oil, and those in the Middle East and Asia seeking to use heavier feedstock while pushing for higher propylene yields. Longer-term, we believe that the global crude supply will get heavier and more sour, a trend that bodes well for our catalysts portfolio. With superior technology and production capacities, and expected growth in end market demand, we believe that Catalysts remains well-positioned for the future. In PCS, we expect growth on a longer-term basis in our organometallicorganometallics business due to growing global demand for plastics driven by rising standards of living and infrastructure spending. As previously announced, we are pursuing opportunities to divest PCS.

The following data and discussion provides an analysis of certain significant factors affecting our results of operations during the periods included in the accompanying consolidated statements of income.