UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 20222023

ORor

Commission File Number 001-39334

BIORA THERAPEUTICS, INC.

(Exact name of Registrantregistrant as specified in its Charter)charter)

Registrant’s telephone number, including area code: (833) 727-2841

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the Registrantregistrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the Registrantregistrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the Registrant:registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the Registrantregistrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the Registrantregistrant has filed a report on and attestation to its management's assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officersofficers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the Registrant,registrant, based on the closing price of the shares of common stock on The Nasdaq Stock Market on June 30, 2022,2023, was approximately $114,439,82438,960,310.

The number of shares of Registrant’sregistrant’s Common Stock outstanding as of March 20, 20232024 was 11,828,45330,313,428.

DOCUMENTS INCORPORATED BY REFERENCE

`

Table of Contents

EXPLANATORY NOTE

All share and per share information included in this Annual Report on Form 10-K has been retroactively adjusted to reflect a 1-for-25 reverse stock split completedeffected on January 3, 2023.

TRADEMARKS

Biora TherapeuticsTM, BIOJETBioJetTM, NAVICAPNaviCapTM, and GITRACGItracTM are trademarks of Biora Therapeutics, Inc. Any other brand names or trademarks appearing in this Annual Report on Form 10-K are the property of their respective holders.

FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K ("Annual Report") contains “forward-looking statements” within the meaning of the federal securities laws, which statements involve substantial risks and uncertainties and are based on estimates and assumptions. All statements, other than statements of historical facts included in this Annual Report, including statements concerning our plans, objectives, goals, strategies, future events, future revenues or performance, financing needs, plans or intentions relating to products and markets, and business trends and other information referred to under “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and “Business,” are forward-looking statements. In some cases, you can identify forward-looking statements by terms such as “may,” “might,” “will,” “objective,” “intend,” “should,” “could,” “can,” “would,” “expect,” “believe,” “design,” “estimate,” “predict,” “potential,” “plan,” “anticipate,” “target,” “forecast” or the negative of these terms, and similar expressions intended to identify forward-looking statements. Forward-looking statements are not historical facts, and reflect our current views with respect to future events. Given the significant uncertainties, you should not place undue reliance on these forward-looking statements.

There are a number of risks, uncertainties, and other factors that could cause our actual results to differ materially from the forward-looking statements expressed or implied in this Annual Report. Such risks, uncertainties, and other factors include, among others, the following risks, uncertainties, and factors:

There may be other factors that cause our actual results to differ materially from the forward-looking statements expressed or implied in this Annual Report, including factors disclosed in the sections of this prospectus entitled “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and elsewhere. You should evaluate all forward-looking statements made in this prospectus in the context of these risks and uncertainties.

We caution you that the risks, uncertainties and other factors referred to above and elsewhere in this prospectus may not contain all of the risks, uncertainties, and other factors that may affect our future results and operations. Moreover, new risks will emerge from time to time. It is not possible for our management to predict all risks. In addition, we cannot assure you that we will realize the results, benefits, or developments that we expect or anticipate or, even if substantially realized, that they will result in the consequences or affect us or our business in the way expected.

All forward-looking statements in this Annual Report apply only as of the date made and are expressly qualified in their entirety by the cautionary statements included in this Annual Report. Except as required by law, we disclaim any intent to publicly update or revise any forward-looking statements to reflect subsequent events or circumstances.

PART I

In this Annual Report, “Biora,” “Biora Therapeutics,” “we,” “us” and “our” refer to Biora Therapeutics, Inc., and our wholly-owned subsidiaries on a consolidated basis, unless the context otherwise provides.

Item 1. Business.

Overview

Biora Therapeutics, Inc. is a clinical-stage biotechnology company developing oral biotherapeutics that could enable new treatment approaches in the delivery of therapeutics. Our therapeutics pipeline includes two therapeutic delivery platforms:

Our mission is to reimagine therapeutics and their delivery. By creating innovative smart pills designed for targeted drug delivery to the GI tract and systemic, needle-free delivery of biotherapeutics, we are developing therapies intended to improve patients’ lives. Our therapeutic pipeline is shown below.

NaviCap™ Targeted Therapeutics for GI-Related DisordersOral Delivery Platform

Overview

Our NAVICAPNaviCap platform is an ingestible smart capsule designed to deliver drugs to the site of disease in the GI tract to improve treatment of IBD. The NaviCap platform utilizes a novel therapeutic approach that is designed to overcome the limitations of current treatments by maximizing the available dose at the site of disease while reducing systemic toxicity.

targeted drug deliveryUsing this platform, previously known as the Drug Delivery System, or DDS, iswe are developing a pipeline of investigational drug-device combination product utilizingcombinations that utilize an ingestible smart capsule for targeted delivery of therapeutics in the GI tract to improvetract. We have two programs, BT-600 (NaviCap + tofacitinib) and BT-001 (NaviCap + variant of adalimumab). Both tofacitinib and adalimumab have been approved for the treatment of IBD. Once swallowed,ulcerative colitis ("UC"), a type of

IBD, but are dose limited by safety concerns at higher doses. Existing research, including research we have generated, suggests that efficacy may be limited by insufficient drug reaching diseased tissue in the capsule is designedcolon.

We believe our technology has the potential to:

Targeted Therapeutics MarketUnmet Need

Inflammatory Bowel DiseasesDisease

IBDs areIBD is a heterogeneous group of inflammatory disorders of the GI tract, and broadly includeincludes two major groups:disorders: Crohn’s disease and UC. According to the CCF,Crohn's & Colitis Foundation ("CCF"), there are approximately 1.6 million Americans affected by IBD. The disease typically has an onset before 30 years of age and is a lifelong illness that can be potentially life-threatening. The body’s immune system, which normally protects the body from external invaders like bacteria and viruses, becomes dysregulated in patients with IBD, and this causescausing the immune system to attack the body’s own tissues. Although IBD has no known cause, there is strong evidence that genetics, a dysregulated immune system, the environment and the gut microbiome all play a role initially in causing the disease and then in perpetuating the inflammation. We estimate the IBD therapeutics market to be in excess of $15 billion.

Ulcerative Colitis

The CCF estimates that UC may affect as many as 907,000 Americans. UC is characterized by inflammation and ulceration of the mucosal lining of the colon. The typical symptoms include diarrhea, bleeding and often abdominal pain. In more severe cases, there can be large amount of blood loss, which can be life-threatening and require emergency surgery. The goal of medical treatment for all forms of IBD is to reduce the inflammation and induce remission initially with medication, followed by the administration of maintenance medication to prevent a relapse of the disease. We estimate the IBD therapeutics market to be in excess of $15 billion.

Ulcerative Colitis

The CCF estimates that UC affects nearly one million Americans. UC is characterized by inflammation and ulceration of the mucosal lining of the colon. The typical symptoms include diarrhea, bleeding and abdominal pain. In more severe cases, there can be large amounts of blood loss, which can be life-threatening and may require emergency surgery.

Treatment for UC depends on the severity of the disease, complications, and response to previous treatment. Most patients with mild to moderate UC will first be treated with aminosalicylates. For patients with moderate to severe UC who do not respond to aminosalicylates, more potent systemic therapies such as infliximab and adalimumab are used. Despite multiple therapeutics being approved for UC that work through a range of mechanisms, outcomes for these patients remainsremain poor, with few patients achieving long-term remission. Data suggests that only 15-30%15 to 30% of patients achieve remission of symptoms after induction with any drug therapy.

Many of these therapies have side effects that limit dosing, which leads to insufficient drug levels in diseased tissue. There is growing data that suggests the amount of drug in tissue is a key driver of patient outcomes. For anti-TNF-alphas such as infliximab and adalimumab, clinical studies have shown that the tissue TNF-alpha level far exceeds the amount of drug reaching the actively-inflamedactively inflamed tissue in patients with active IBD.

We believe that current approaches to drug delivery are inadequate to suppress the inflammatory response. In addition, we presented, in conjunction with our academic collaborators, we presented compelling evidence to support the importance of drug levels in tissue at the 17th Congress of the European Crohn’s and Colitis Organization and at the 34th edition of the Belgian Week of Gastroenterology. Material presented included data from patients with moderate to severe UC taking commercial formulations of tofacitinib. GI tissue biopsies were obtained from these patients, which identified a clear correlation between higher concentrations of drug in the tissue and improved outcomes.

Our Solution: NAVICAPNaviCap Targeted Drug Delivery Platform

Our NAVICAP platform is designed to deliver drugs to the site of disease in the GI tract to improve treatment of IBD. Using this platform, we are developing a pipeline of investigational drug-device combinations that are designed to overcome the limitation of current treatments. Our products are designed to treat disease at the site in the GI tract and achieve high concentration in the affected tissues with the potential to drive efficacy and minimize systemic exposure and toxicity. Through preclinical studies we have shown that a range of molecules, including monoclonal antibodies targeting key pathways including TNF-alpha, integrins and interleukins, were found in inflamed colonic tissue when given directly into the lumen of the colon. We have conducted preclinical studies which indicate that these molecules, given locally in animal models, can be efficacious. We believe delivering drugs locally at the site of inflammation will result in a higher concentration of drug in the intestinal tissues of patients with IBD, potentially leading to greater efficacy. We believe that local delivery at the site of disease will result in less systemic exposure and may require lower drug administration, potentially reducing the severe adverse event profiles seen with some of these therapeutics. We also believe that because this technology is designed to have lower systemic absorption, it may be ideal for use in combination therapy with the potential to boost efficacy without adversely affecting the active drug’s safety profile.

4

NAVICAP drug delivery device

NAVICAPTargeted DrugOral Delivery Device

The NAVICAP drug deliveryNaviCap device is an investigational, clinical-stage, single-use ingestible device approximately the size of a fish oil capsule and rounded for ease of swallowing. Itthat has a drug capacity of up to 500µL with an outer casing made of inert material. ItThe device is approximately the size of a fish-oil capsule and is rounded for ease of swallowing. Once swallowed, the device is designed to passively deliverautonomously identify specific locations in the GI tract and release a precisetherapeutic dose of drugat a determined location that can act locally in the GI tract, thereby potentially limiting systemic absorption and the associated toxicity side effects.

GITRAC

NaviCap device

GItracTM Autonomous Location Technology

The NAVICAPNaviCap device incorporates our GITRACGItrac autonomous location technology, which is designed to autonomously identify the ileal/ileocecal region of the GI tract and deliver medication to that region. GITRACGItrac is based on a proprietary LED light and photodetector sensor array that detects reflected light inwithin the GI tract and uses a proprietary algorithm to determine anatomical locations of interest, such as the pyloric and ileocecal transition. GITRACGItrac differs from other GI tract localization technologies that rely on pH levels and other physiological factors, which are not specific and are highly variable, especially in patients with IBD. The GITRACtechnology was evaluated in 47 subjects across three clinical studies with 85% accurate detection of colon entry.

Clinical Device Function Studies

We have conducted threefour separate clinical device function studies to evaluate the NAVICAPfunction of the NaviCap device function in humans.humans, with approximately 50 study participants receiving over 80 NaviCap devices. The NaviCap device has demonstrated a favorable safety profile and high accuracy rate in identifying entry into the colon in both normal healthy volunteers and in patients with active UC.

PM-601 Device function study in healthy volunteers in a fasted state

We conducted a clinical device function study to evaluate the safety and tolerability of the device as well as the ability to identify entry into the colon and release payload. In the study, 12 normal healthy volunteers were enrolled and administered a single NAVICAPNaviCap device loaded with a radioisotope that can be imaged with sequential gamma scintigraphy. Imaging was correlated with data recovered from the device to confirm time of detection of entry into the colon and release of the radioisotope. The results of the study demonstrated that the device was well tolerated and 10/12 (83%) of devices accurately identified entry into the colon. The scintigraphic images below are taken

5

from a subject in the study and demonstrate release in the first part of the colon and eventual total coverage of the colon by the radioisotope.

PM-602 Device function study in patients with active UC

In this clinical device performancefunction study, we evaluated whether the NAVICAPNaviCap device can accurately identify entry to the colon, activate and release a payload in patients with active UC, which presents a challenging environment of inflammation, bleeding and highly variable motility. The NAVICAPNaviCap device was ingested orally, and after localization, released a payload that included radioisotopes. Scintigraphic imaging was used to evaluate device localization and payload delivery to the large intestine. Study results demonstrated that the device was well tolerated and performed as intended in active UC patients. All devices (7/7) accurately identified entry into the colon, triggered release of aits liquid payload and achieved distribution across the colon. The scintigraphic images below are taken from a subject in the study. They demonstrate release in the first part of the colon and eventual distribution of the radioisotope to the entire colon. This study was funded in part by the CCF.

PM-611 Device function study in healthy volunteers – fasted and fed

In this clinical device function study, we evaluated whether the NAVICAPNaviCap device is impacted by food, potentially enabling non-fasted administration. Results of the study demonstrated that the NAVICAPNaviCap device was well tolerated and functioned as intended in healthy volunteers using four different fasted/fed dosing schedules.100% ofschedules. All analyzed devices (39/39) successfully identified entry to the colon in all fasted/fed schedules, (39/39), and 97.4% of analyzed devices (38/39) activated the payload release function (38/39).function. This study confirmed that the potential effect of food on the function of the NAVICAPNaviCap device is minimal.

Lead ProgramsBT-603 Device function study in healthy volunteers – fasted state

We have two lead programs, BT-600 (NAVICAP + tofacitinib)In this clinical device function study, we evaluated the performance in healthy volunteers of the NaviCap device that we intend to use in a Phase 1 trial using scintigraphic imaging. Results indicated that 94% of devices (15/16) accurately identified entry into the colon, triggered release of its liquid payload, and BT-001 (NAVICAP + variant of adalimumab). Both tofacitinib and adalimumab have been approved for treatment of UC, but are dose limited by safety concerns at higher doses. Existing research, including research we have generated, suggest that efficacy may be limited by insufficient drug reaching diseased tissue inachieved distribution across the entire colon. We believe our technology can deliver sufficient amounts of these drugs to the site of disease to improve outcomes for patients suffering from UC.

NaviCap Programs

BT-600 Liquid formulation of tofacitinib delivered via NAVICAP NaviCap for the treatment of ulcerative colitis

We are developingOur lead program for the NaviCap platform is BT-600 (formerly known as PGN-600). We are developing BT-600 as a drug-device combination product that includes an orally-deliveredorally delivered liquid formulation of tofacitinib for the treatment of UC. BT-600 is our most advanced targeted therapeutics candidate. Tofacitinib is approved for the treatment of UC and is dose-limited based on safety concerns, making it an ideal therapy for targeted delivery. We have

Clinical Trials

In 2023, we submitted an Investigational New Drug (IND) application for BT-600 to the U.S. Food and Drug Administration ("FDA"), and the FDA cleared our IND application in late 2023. In January 2024, we initiated a Phase 1 trial of BT-600 in healthy volunteers.

The objectives of this Phase 1 randomized, double-blind, placebo-controlled, single and multiple ascending dose clinical trial are to evaluate the safety, pharmacokinetics ("PK") and pharmacodynamics, including effects on colon tissue, of BT-600 when administered orally in healthy adult volunteers. The trial, which is being conducted in the United States, consists of two parts. The first is a single-dose ascending cohort comprised of 24 participants receiving BT-600 with tofacitinib at 5 mg and 10 mg doses or placebo. The second is a multiple-dose ascending cohort comprised of 24 participants receiving BT-600 with tofacitinib at 5 mg and 10 mg doses or placebo.

The clinical trial is currently in progress, and results will be presented upon completion of the trial. The single ascending dose cohort was completed in February 2024, and we shared key results from the interim analysis in the Company's 8-K filed on March 26, 2024. Based on what has been observed preclinically, we anticipate increased colonic tissue drug levels and reduced systemic levels compared with conventional oral tofacitinib. Given the known efficacy of the currently approved doses of tofacitinib, BT-600 has the potential to improve the management of UC in patients.

Preclinical Studies

Our data generated data in animal models of colitis demonstrated that tofacitinib delivered directly to the colon can lead to significantly higher colon tissue concentrations than equivalent standard oral doses.

We conducted a preclinical study of BT-600 in a canine model comparing seven-day daily administration of 10 mg standard oral tablet formulation of tofacitinib to 10 mg of liquid formulation of tofacitinib delivered via NAVICAP (BT-600).the NaviCap device. We evaluated mean concentration of tofacitinib in tissues at day seven and systemic tofacitinib levels by area under the curve at days one and six.

6

The pharmacokinetic ("PK") data obtained with BT-600 and tofacitinib oral tablet is illustrated in the graphs presented below.

Results of the study demonstrated that BT-600 was well tolerated with a favorable safety profile and that when tofacitinib was delivered to the colon, drug levels in blood were reduced as compared to oral tofacitinib tablets. In addition, tissue drug levels were at least 25 times higher along the length of the colon as compared to oral tofacitinib tablets. We believe these results indicate that BT-600 has the potential to increase local tissue concentrations of tofacitinib while loweringreducing systemic drug levels, thatwhich could lead to a safer and more efficacious treatment.

We recentlyTo support our IND filing for BT-600, we subsequently completed a 14-day preclinical toxicology study of BT-600 in a canine model comparing 14-day daily administration of 10 mg standard oral tablet formulation of tofacitinib to 10 mg of liquid formulation of tofacitinib delivered via NAVICAPNaviCap (BT-600). versus placebo delivered via NaviCap. Over 600 planned devices were administered and we observed no adverse events or safety signals. We are continuing development of BT-600 and, subject to regulatory approval, we plan to initiate a Phase 1a clinical trial of BT-600 in healthy volunteers during the second half of 2023 evaluating both blood and colon tissue concentrations of tofacitinib, and a potential Phase 1b trial in active UC patients in the first half of 2024. We believe that if we demonstrate similar results clinically to what has been observed preclinically, and given the known efficacy of the currently-approved doses of tofacitinib, BT-600 has the potential to improve the management of UC patients.signals were observed.

BT-001 Liquid formulation of Anti-TNF-alpha monoclonal antibody delivered via NAVICAPNaviCap for the treatment of ulcerative colitis

We are developing BT-001 (formerly known as PGN-001) as an orally-deliveredorally delivered variant of adalimumab for the treatment of UC. Multiple anti-TNF-alpha targeting therapies have been approved for UC, but data suggests patients may not have enough drug in the tissue to engage the target, TNF-alpha, and reduce inflammation. We have conducted a series of preclinical studies demonstrating the potential of locally-deliveredlocally delivered anti-TNF-alpha antibodies to reduce disease burden in UC models.

We conducted a study in an adoptive T cell transfer model of colitis in mice and compared an anti-TNF-alpha delivered by intraperitoneal ("IP") injection every three days to daily delivery directly to the colon by intracecal ("IC") catheter. We also compared treatment naïve animals and vehicle controls. Treatment duration was 42 days and, at day 42, blood and tissues were collected for

7

bioanalysis of inflammatory cytokines and tissues were fixed for histopathologic analysis. The results are presented in the graphs below.

Results of the study demonstrate significant reduction in mean concentration of inflammatory cytokines in groups treated with anti-TNF-alpha by IC or IP route when compared with vehicle control (IP and IC) in colon tissue. Targeted IC anti-TNFα treatment showed a significant improvement in mean histopathologic score when compared with the vehicle controls (IP and IC) groups in proximal and distal colon tissues, indicating that anti-TNF-alpha treatment was generally more effective in this group. Targeted IC anti-TNF-alpha treatment showed the greatest magnitude of lymphocyte reductions when compared with vehicle control groups. We believe this study supports the potential efficacy of locally-deliveredlocally delivered anti-TNF-alpha antibodies and BT-001.

BT-001 is currently in preclinical-stage development with an anti-TNF-alpha antibody formulation that we have developed and scaled to Good Manufacturing Practice ("GMP")-grade material.

BioJet Systemic TherapeuticsOral Delivery Platform

OurThe BioJet systemic therapeutics program uses the BIOJETingestible capsule, previously known as the Oral Biotherapeutic Delivery System, or OBDS, whichoral delivery platform is designeda novel platform for needle-free delivery of therapeutics that would otherwise require injection. Biora’s novel approach to oral delivery of large molecules uses an ingestible capsule designed for needle-free, liquid jet injection of a liquid drug formulation into the tissue of the small intestine where it can be absorbed systemically.

The BioJet platform includes drug-device combination programs designed to achieve high systemic exposure. The BIOJET device is approximately the sizebioavailability and replace injection for better management of a multivitamin. Ourchronic diseases. This technology has the potential to deliver a range of molecules, including monoclonal antibodies,proteins, peptides, and nucleic acids. These substances cannot survive stomach acids and are too large to be absorbed in the intestine and, therefore, are currently delivered by injection. However, there is significant aversion to injections among patients, with approximately 20% of adults affected by fear of needles and overall strong patient and physician preference for oral delivery of therapies as compared to injections. This aversion to painful injections affects compliance with therapy, which in turn impacts patient outcomes. For example, diabetes patients initiating treatment with an injectable GLP-1 agonist reported 71% higher discontinuation rate as compared to those starting oral therapy and 42% of patients failed to maintain treatment due to injection concerns.

The BIOJETWe believe oral, systemic drug delivery platform is a novel platform for the delivery of therapeutics that would otherwise require injection. Once swallowed, the capsule is designed to move through the intestinal tract and trigger in the small intestine, where it uses needle-free, liquid-jet release to inject drug directly into the small intestine for optimized bioavailability.

The BIOJET platform is designed to enable delivery of liquid drug, reducing or eliminating the need for reformulation, and allowing for dosing of up to 400 µL. This makes the technology potentially broadly applicable for large molecule candidates. With more frequent administration, oral deliverymolecules has the potential to to:

Unmet Need

Systemic Therapeutics Market

Over the past two decades, biologic drugs have become the standard of care for a variety of diseases, including rheumatoid arthritis, psoriasis, diabetes, obesity, Crohn’s disease, UC and a range of cancers. We estimate the total biologics market to be in excess of $250 billion (or over $100 billion for monoclonal antibodies alone).

To reduce injections, many biologics have been developed for less frequent dosing, such as weekly or monthly injections; however, this means larger amounts of the drug are in circulation, which can lead to safety concerns. This also means that before the next dose, drug levels can drop lower than desired, potentially impacting efficacy. An ideal dosing regimen may be a more frequent dosing schedule, such as daily, to maintain drug levels within a smaller window that is optimal for safety and efficacy.

8There is also significant aversion to injections among patients, with approximately 20% of adults affected by fear of needles and overall strong patient and physician preference for oral delivery of therapies as compared to injections. This aversion to painful injections affects compliance with therapy, which in turn impacts patient outcomes. For example, diabetes patients initiating treatment with an injectable glucagon-like-peptide 1 ("GLP-1") agonist reported 71% higher discontinuation rate as compared to those starting oral therapy and 42% of patients failed to maintain treatment due to injection concerns.

To date, efforts to deliver biologics orally have seen limited success. The primary mechanism has been chemical agents formulated with drugs that facilitate passage from the gut lumen into the GI tissue. These approaches areachieve limited to small peptides and, even then, bioavailability, ofwith less than 1% is achieved. We believe that an average bioavailability of around 10 to 15% with repeat dosing will prove satisfactory for a large number of biologics.

Our Solution: Systemic Therapeuticsachieved in commercial products.

We are developing drug-device combinationsThe BioJet Systemic Oral Delivery Device

The BioJet platform uses an ingestible device designed to deliver biologics systemically, via a more desirable oral route of administration. Our unique approach to oral delivery of biologic drugs istransit through use of an ingestible capsule designed for needle-free jet injection of a liquid drug formulation into the tissue ofdigestive system and activate in the small intestine, where itliquid jets deliver drug directly into small intestinal tissue for uptake into systemic circulation.

The BioJet device is a mechanical device that is designed for economical production at scale. The device is approximately the size of a multivitamin and is shaped like a standard capsule for ease of swallowing. It is made of an inert, biocompatible material with a liquid reservoir that can be absorbed systemically. We believe systemic therapeutics can (1) help improve patient compliancehold 300-400µL with low retained volume (less than 10µL), which protects the drug from stomach acids and lower IV infusion costs, (2) help expandproteolytic enzymes. The large payload provides the marketability to dose in multi-milligram concentrations, and the use of liquid formulation reduces or eliminates the need for drugs acrossreformulation, making the platform broadly applicable to a wide range of chronic use indications, and (3) help biotherapeutics become more competitive with small molecules.

BIOJETSystemic Drug Delivery Platform

Our BIOJET systemic drug delivery platform is designed to orally deliver large molecules through a needle-free injection in the small intestine for systemic uptake. The BIOJET capsule protects the drug from acids and proteolytic enzymes and uponUpon reaching the small intestine, an enteric trigger degrades, activating the needle-free liquid-jetliquid jet formation and delivery. We initially developed an endoscopically- or surgically-placed, liquid-jetThe device for optimization and early preclinical work. Withuses liquid jet delivery to deliver the endoscopically- or surgically-placed device we assessedliquid drug into the potential bioavailability rates that maysubmucosal layer of the small intestine, where it can be achieved with our device in preclinical swine studies with drugs such as human insulin, dulaglutide, and adalimumab. In these studies, we have observed average bioavailability of approximately 19% (n=18), 29% (n=11), and 27% (n=11), respectively. We have since progressed to an autonomous, fully integrated preclinical device for further evaluation.rapidly taken up into systemic circulation.

BIOJET DrugBioJet Systemic Oral Delivery Device

The BIOJET device is approximatelyPreclinical Model Selection for Translational Research

We utilize two different animal models for translational research with the size of a multivitamin, is shaped like a standard capsule for ease of swallowingBioJet platform: canine and can deliver a drug payload of up to 400 µL. The large payload and liquid delivery make the platform broadly applicable to a range of molecules, including monoclonal antibodies, peptides, and nucleic acids.swine.

WeAlthough the canine is a preferred model for oral therapeutic evaluation, anatomical differences between the canine and human small intestine make the canine model suboptimal for the evaluation of liquid jet injection to the small intestine (e.g., determining drug bioavailability). Instead, due to the canine's similar GI transit and motility to human, its consistent and controllable gastric emptying, and the ease of oral dosing, the canine model is used specifically for evaluation of safety and oral delivery functionality, including consistency and repeatability.

A swine model was chosen to better represent the PK properties of submucosal injection in humans, due to its similar anatomical and histological features in the small intestine. The anatomy of the swine stomach requires endoscopic placement of the device, which, once released, can naturally transit, autonomously trigger and deploy.

Our preclinical model selection is depicted in the diagram below.

Preclinical Device Function Studies

In 2022, we conducted a preclinical study with anto evaluate the performance and assess the autonomous BIOJETtrigger function of the BioJet device delivered orally to canines.in a canine model, which was presented as a poster at the Parenteral Drug Association Universe of Pre-Filled Syringes and Injection Devices Conference in October 2022. The study was a single-dose study evaluating safety and tolerability of the device in addition to the ability of the device to activate and deliver payload when it reachedautonomously actuate in the small intestine. We evaluated device function by loading the deviceBioJet devices with a contrast agent (iohexal) and sequentially imaged

9

post-administration as the device transited through the body.body to show device deployment time and location in the intestine.

This study demonstrated that the BioJet device can reliably deploy in the small intestine, which supports oral administration of the device. The images below are taken from the study and show the contrast agent inside the capsule in the stomach and after deployment in the small intestine.

This study demonstratedResearch Collaborations

Our strategy is to partner with third parties to leverage their drug candidates and resources to help make the BioJet platform a leader in the oral delivery of biotherapeutics. We are currently engaged in multiple ongoing research collaborations with pharmaceutical

companies. As we advance development of the BioJet platform, we intend to expand our existing collaborations and pursue additional partnership opportunities with pharmaceutical companies.

AstraZeneca

We have an ongoing research collaboration with AstraZeneca, which was previously referred to as “Large Pharma 1.” In January 2024, we announced that the device can reliably deployBioJet platform met key performance milestones as part this research collaboration using AstraZeneca’s undisclosed molecule. In a preclinical study, we assessed the bioavailability of the molecule when delivered via the BioJet platform in a porcine model, with comparison to subcutaneous administration. BioJet devices were administered endoscopically, which is typical in a porcine model, and released for autonomous actuation. The results met performance targets set by us and our collaborator of (i) greater than 25% bioavailability compared to subcutaneous delivery and (ii) less than 50% coefficient of variation.

Ionis Pharmaceuticals

We have been conducting preclinical research under a research collaboration agreement that provides funding to test the BioJet platform’s ability to deliver antisense oligonucleotides. A key interest with this molecule type is the ability to demonstrate the potential of the BioJet platform to achieve uptake of large molecules into the liver. Many disease targets reside in the liver, and it is a key area of focus for RNA-based therapeutics, which include antisense oligonucelotides as well as siRNA-based therapeutics. These large molecules must typically be delivered via intravenous ("IV") or subcutaneous injection; however, the majority of the drug is metabolized before reaching the liver.

The BioJet platform uses liquid jet injection into the small intestine, which supportsis an optimal delivery pathway to the liver, via the hepatic portal system. Results of this research, which have not been released, indicate the BioJet platform’s potential to provide a unique advantage for liver-targeted, oral administrationdelivery of large molecules.

Other Research Collaborations

We also have research collaborations with two other undisclosed large pharmaceutical companies. We refer to these collaborators as Large Pharma 2 and Large Pharma 3. These research collaborations provide funding to test the BioJet platform’s ability to achieve bioavailability through oral delivery of the BIOJET device. We are continuingcollaborators’ molecules via liquid jet delivery to advance development of the BIOJET platform through preclinical testing.small intestine in animal models.

LeadDemonstration Programs

We have two leaddemonstration drug-device combination programs for the BioJet platform, BT-200 (GLP-1 receptor agonist) and BT-002 (variant(adalimumab variant).

BT-200: Liquid formulation of adalimumab)a GLP-1 receptor agonist delivered via BioJet for the treatment of type 2 diabetes

We are developing BT-200 (formerly PGN-OB2) as a combination product of a GLP-1 receptor agonist and BT-200 (GLP-1RA).the BioJet device for the treatment of type 2 diabetes. GLP-1 receptor agonists stimulate insulin secretion and suppress glucagon release. We believe oral GLP-1 receptor agonists will be preferred by patients to injectables, resulting in a significant market opportunity.

In October 2023, we presented data at the European Association for the Study of Diabetes from three preclinical studies to assess the bioavailability of semaglutide when delivered via liquid jet technology in a porcine model. Semaglutide is a GLP-1 receptor agonist currently used to treat type 2 diabetes and for weight management via subcutaneous injection or taken orally. The studies included single, approximately 1 mg doses of semaglutide in a liquid formulation delivered via the BioJet device. Devices were administered endoscopically, and then released for autonomous activation. Blood sampling was performed from zero to 240 hours post-dose, with comparison to a control animal with drug administered intravenously.

Across the three studies, 96% of animals showed semaglutide in systemic circulation at clinically relevant levels for up to ten days following administration. Among the 22 animals dosed with semaglutide, oral bioavailability averaged 20.5% ± 15.3%, compared to IV control.

The PK data obtained across the three studies (PSS3, PSS4, and PSS5) is shown compared to IV administration in the graph below.

BT-002: Liquid formulation of adalimumab delivered via BioJet for the treatment of autoimmune conditions

We are developing BT-002 (formerly PGN-OB1) as a combination product of a variant of adalimumab and the BioJet device for the treatment of inflammatory conditions. Adalimumab is approved for a range of inflammatory disorders and generated over $18 billion in 2022 in annual sales, making it the best-selling drug globally. We estimate the market for monoclonal antibodies to be over $100 billion alone. An oral variant of adalimumab presentsmay represent a significant market opportunity fordue to the many patients thatwho would like to avoid painful injections. GLP-1RAs are a leading class of therapeutics for type 2 diabetes and have a projected market of over $19 billion by 2028. As a result of our use of known molecules, we believe that rapid proof of concept with preclinical and phase 1 PK results is possible.

BT-002: Liquid formulation of anti-TNF-alpha monoclonal antibody delivered via BIOJET for the treatment of autoimmune conditions

We are developing BT-002 (formerly PGN-OB1) as a combination product of a variant of adalimumab and the BIOJET device for the treatment of inflammatory conditions. Several anti-TNF-alpha antibodies have been approved to treat a range of autoimmune conditions. However, all require either intravenous or subcutaneous injection. An oral anti-TNF-alpha antibody may represent a significant market opportunity. BT-002 is currently in preclinical stage development with an anti-TNF-alpha antibodya liquid formulation of adalimumab that we have developed and scaled to GMP-grade material.

We have conducted a series of porcine preclinical studies demonstrating the ability of the BIOJET device to consistently trigger and release payload and achieve high bioavailability. The porcine model is preferred for bioavailability, as the pig intestine anatomy more closely resembles human intestinal anatomy than canine and is therefore more appropriate, especially for our method of delivery. However, the porcine stomach anatomy requires endoscopic placement of the device. In porcine studies with endoscopic placement of

10

the device and autonomous delivery, we have achieved up to 67% bioavailability, with an average of 23% bioavailability in animals where drug was detected in blood. The PK data obtained with BT-002 is illustrated in the graph below.

In February 2023, we announced preliminary results from a preclinical study for the BT-002 program, which assessed the bioavailability of a variant of adalimumab when delivered via BIOJETBioJet liquid jet injection technology in a porcine model. AUsing the BioJet device, a single dose of 56 mg of a variant of adalimumab (a dose similar to those of subcutaneously administered monoclonal antibodies) was administered to a total of nine animals, using the BIOJET device.animals. The device was administered and activated endoscopically. Following administration, drug was detected in the blood in all animals with an average bioavailability of 51.3%, and variability similar to that observed by others with subcutaneous injection. These results demonstrate the potential of our liquid jet delivery technology to perform comparably to subcutaneous injection. We expect to release detailed results in conjunction with a planned presentation of the data during 2023.

BT-200: Liquid formulation of a GLP-1 receptor agonist delivered with via BIOJET for the treatment of type 2 diabetes

We are developing BT-200 (formerly PGN-OB2) as a combination product of a GLP-1 receptor agonist and the BIOJET device for the treatment of type 2 diabetes. We believe oral GLP-1RAs will be preferred by patients to injectables, resulting in a significant market opportunity.

In February 2023, we announced preliminary results from preclinical testing to assess the bioavailability of semaglutide, a GLP-1 receptor agonist, when delivered via BIOJET liquid jet technology in a porcine model. Seven animals received a single dose of 0.96 mg of a liquid formulation of semaglutide using the BIOJET device, which was administered and activated endoscopically,The PK data obtained with comparison to a control animal with drug administered intravenously. Following administration of semaglutide, drug was detectedBT-002 is illustrated in the blood in all seven animals with an average bioavailability of 37%, and with variability similar to that observed by others with subcutaneous injection. We expect to release detailed results in conjunction with a planned presentation of the data during 2023.graph below.

Collaborations and Partnerships 

Our strategy is to advance our own pipeline while partnering with third parties to also leverage their drug candidates and resources to help make the BIOJET platform a leader in the oral delivery of biotherapeutics. We are currently engaged in three ongoing collaborations, two of which are with large pharmaceutical companies for the use of the BIOJET platform with their molecules and one of which is with Ionis Pharmaceuticals, Inc. for the delivery of antisense oligonucleotides via BIOJET. As we advance development of our BIOJET platform we intend to expand our existing collaborations and pursue additional partnership opportunities with large pharmaceutical companies.

GI Sampling and Diagnostics

We have previously developed two additional ingestible devices focused on GI sampling and diagnostics. These platforms use our GItracTM autonomous location technology, which is also part of the NaviCap platform, which is designed to autonomously identify key regions of the GI tract. GItracis based on a proprietary LED light and photodetector sensor array that detects reflected light within the GI tract and uses a proprietary algorithm to determine anatomical locations of interest, such as the pyloric and ileocecal transition.

Our Recoverable Sampling System ("RSS") platform is an ingestible smart capsule designed to autonomously identify locations in the GI tract and collect and preserve a sample for analysis. This platform, if successfully developed, has the potential to analyze and characterize the GI tract. We have previously demonstrated the ability of the RSS to collect and preserve microbiome samples from within the GI tract of normal healthy volunteers.

Our PIL Dx ("PIL Dx") platform is an ingestible smart capsule designed to sample, measure, and transmit results. This platform has the potential for on-board fluorescent assays measuring bacteria, proteins, and drugs, plus additional detection modalities. If successfully developed, the PIL Dx could address unmet healthcare needs by more precisely identifying and diagnosing chronic GI diseases like small intestinal bacterial overgrowth, IBD and non-alcoholic fatty liver disease.

We are not currently in active development with theThe RSS and PIL Dx platforms are not in active development, but we may develop them in the future.

Competition

The biotechnology and pharmaceutical industries are characterized by rapid technological advancement, intense competition and a strong emphasis on intellectual property and proprietary products.

While we believe that our proprietary technologies, knowledge, experience, and scientific expertise provide us with competitive advantages, we face substantial competition from major pharmaceutical companies, biotechnology companies, academic institutions, government agencies, and public and private research institutions. For any products that we eventually commercialize, we will not only compete with existing technologies and therapies but also with those that may become available in the future.

Given our technology’s potential utility across multiple applications, we expect to face intense competition from a diverse set of competitors. Many of our competitors, either alone or with strategic partners, have significantly greater financial, technical and human resources than we do. Competitors may also possess more experience developing, obtaining regulatory approval for, and marketing novel treatments and technologies in the areas we are pursuing. These factors could give our competitors an advantage in recruiting and retaining qualified personnel, developing similar or superior products, completing clinical development, securing strategic partnerships, and commercializing their products. We believe the key competitive factors that will affect the development and commercial success of our product candidates are efficacy, safety and tolerability profile, reliability, method of administration, convenience of dosing, price, reimbursement, patent protection and patents of our competitors.

Targeted TherapeuticsNaviCap Platform Competition

The current IBD market is both established and mature, comprised of a range of therapeutic agents, including branded and generic small molecules, biologics and biosimilars, and involving multiple mechanisms of action as well as routes of administration. Although we believe our technology platform will provide us with a competitive advantage in its ability to enable targeted delivery of therapeutic agents via oral administration, we will face competition from several companies whose current research and development ("R&D") efforts will likely result in the emergence of newer pharmaceuticals touting oral administration, more convenient dosing frequency, novel mechanisms of action, and improved safety profiles and drug availability. We believe that the majority of competition will come from those companies marketing or developing biologics and small molecule therapeutics, such asincluding, but not limited to, AbbVie, Eli Lilly, Galapagos, Gilead, J&J, Pfizer, Protagonist, Roche, Takeda, and UCB.

SystemicBioJet Platform Therapeutics Competition

We expect to face competition from a number of technologies currently marketed or being developed to enhance or facilitate the oral administration of therapeutic agents. There is a wide range of competitive technologies and mechanisms that may challenge us, some of which are the subject of issued patents and pending patent applications, including issued patents and pending patent applications directed to ingestible devices for the oral administration of therapeutic agents.

The primary categories of oral biotherapeutic technologies currently available or being developed by our competitors include:

12

Our Strengths

Our business is built on a strong foundation designed to allow us to differentiate ourselves from potential competitors and drive the development of innovative platforms and product solutions.

Our strengths include:

Our Strategy

Our vision is to build upon our expertise and core competencies to transform biotherapeutic use and delivery. To realize our vision, we intend to:

Intellectual Property

The proprietary nature of, and intellectual property protection for, our products, processes, and know-how are important to our business. Our success depends in part on our ability to obtain patent and other legal protection for our products, technology, and trade secrets and know-how, to operate without infringing on the proprietary rights of others, and to prevent others from infringing on our proprietary rights. We rely on a combination of patents, trade secrets, know-how, license agreements, and nondisclosure and other contractual provisions to protect our intellectual property rights. These rights cover our proprietary technologies, processes, databases, information, and materials. We seek and maintain patent protection in the United States and internationally for our approximately 300 issued patents and pending patent applications, while also in-licensing technology, inventions, and improvements that we consider important to the success of our business. In addition to patent protection, we intend to use other means to protect our products, technology, and know-how, including pursuing terms of marketing or data exclusivity for our products, orphan drug status (if applicable) and similar rights that are available under regulatory provisions in certain territories, including the United States and Europe. We also rely on know-how and continuing technological innovation that are protected as trade secrets to develop and maintain our competitive position.

Drug-Device and Diagnostics Device Patent Portfolio

Intellectual property rights relating to our targeted and systemic therapeutics technologies and other ingestible device-enabled technologies include a patent portfolio consisting of approximately 70 distinct patent families comprising around 165 issued patents and approximately 135 pending applications. Of these patents and applications, the latest to expire issued U.S. patents are projected to expire in 2039 and the latest to expire U.S. patent applications, if and when issued, would be projected to expire in 2042, in each case, subject to potential term extensions. Twenty-four of the families were acquired in connection with the acquisition of certain tangible and intangible assets relating to the business formerly operated by Medimetrics GmbH, Medimetrics Personalized Drug Delivery B.V., and Medimetrics Personalized Drug Delivery Inc. In general, we file patent applications in the following patent jurisdictions: the United States, Australia, China, Canada, Europe, and Japan; and sometimes in these additional jurisdictions: Brazil, Eurasia, Hong Kong, Israel, India, South Korea, Mexico, and Singapore.

The patents and pending applications in this portfolio include claims that are directed to a range of gastroenterology-related and drug delivery methods, systems, and compositions, including but not limited to, the following:

Government Regulation

Regulations Related to Clinical Laboratories

Prior to the Strategic Transformation and the shutdown of commercial operations in our laboratory in Ann Arbor, MI and the sale of our affiliated business Avero Diagnostics, both of which occurred in 2021, we operated clinical laboratories. During that time, we were required to comply with various regulations applicable to clinical laboratories and laboratory developed tests, as well as various

14

healthcare fraud and abuse statutes that applied to our commercial operations, each which are described in detail in our prior SEC filings.

Regulations Related to Our Drug-Device Combination Product Candidate

Due to the variety of product candidates that we are developing, we and our product candidates will be subject to a wide variety of regulations promulgated by the U.S. Food and Drug Administration (the "FDA").FDA. Specifically, our product candidates are subject to regulation by the FDA’s Center for Biologics Evaluation and Research, Center for Devices and Radiological Health and Center for Drug Evaluation and Research, as well as other

non-U.S. regulatory bodies (should we develop the product candidates and seek to obtain regulatory clearances or approvals to market outside of the United States). Certain of these applicable regulations are described below.

Medical Device Regulation

Pursuant to its authority under the Federal Food, Drug and Cosmetic Act (the "FD&C Act"), the FDA has jurisdiction over medical devices, including in-vitro diagnostics devices, and other products we are currently developing.developing or may develop in the future. The FDA regulates, among other things, the research, design, development, preclinical and clinical testing, manufacturing, safety, effectiveness, packaging, labeling, storage, recordkeeping, pre-market clearance or approval, adverse event reporting, marketing, promotion, sales, distribution and import and export of medical devices. Unless an exemption applies, each new or significantly modified medical device we seek to commercially distribute in the United States will require either a premarket notification to the FDA requesting permission for commercial distribution under Section 510(k) of the FD&C Act, also referred to as a 510(k) clearance, or FDA approval of a premarket approval application ("PMA"). We are developing certain ingestible product candidates such as ingestible diagnostic products, that are subject to the FDA’s premarket review requirements applicable to medical devices.

Device Classification

Under the FD&C Act, medical devices are classified into one of three classes—Class I, Class II or Class III—depending on the degree of risk associated with each medical device and the extent of control needed to provide reasonable assurances with respect to safety and effectiveness.

Class I includes devices with the lowest risk to the patient and are those for which safety and effectiveness can be reasonably assured by adherence to General Controls, which require compliance with the applicable portions of the FDA’s Quality System Regulation ("QSR"), facility registration and product listing, reporting of adverse events and malfunctions, and appropriate, truthful and non-misleading labeling and promotional materials. Some Class I devices also require premarket clearance by the FDA through the 510(k) premarket notification process described below. Most Class I products are exempt from the premarket notification requirements.

Class II devices are those that are subject to the General Controls, as well as Special Controls as deemed necessary by the FDA to ensure the safety and effectiveness of the device. These Special Controls can include performance standards, patient registries, FDA guidance documents, and post-market surveillance. Most Class II devices are subject to premarket review and clearance by the FDA. Premarket review and clearance by the FDA for Class II devices is accomplished through the 510(k) premarket notification process.

Class III devices include devices deemed by the FDA to pose the greatest risk such as life-supporting or life-sustaining devices, or implantable devices, in addition to those deemed novel and not substantially equivalent following the 510(k) process. The safety and effectiveness of Class III devices cannot be reasonably assured solely by the General Controls and Special Controls described above. Therefore, these devices are subject to the PMA application process, which is generally more costly and time-consuming than the 510(k) process. Through the PMA application process, the applicant must submit data and information demonstrating reasonable assurance of the safety and effectiveness of the device for its intended use to the FDA’s satisfaction.

510(k) Pathway

To obtain 510(k) clearance, we must submit a premarket notification under Section 510(k) of the FD&C Act demonstrating that the proposed device is “substantially equivalent” to a predicate device. A predicate device is a legally-marketedlegally marketed device that is not subject to premarket approval, i.e., a device that was legally marketed prior to May 28, 1976 (pre-amendments device) and for which a PMA is not required, a device that has been reclassified from Class III to Class II or I, or a device that was found substantially equivalent through the 510(k) process. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. Clinical data is sometimes required to support substantial equivalence. The FDA’s 510(k) clearance pathway usually takes from three to 12 months from the date the notification is submitted, but it can take considerably longer, depending on the extent of FDA’s requests for additional information and the amount of time a sponsor takes to fulfill them. After a 510(k) is submitted, the FDA determines whether to accept it for substantive review. If it lacks necessary information for substantive review, the FDA will refuse to accept the 510(k) submission. If it is accepted for filing,

15

the FDA begins a substantive review. By statute, the FDA is required to complete its review of a 510(k) premarket notification within 90 days of receiving the 510(k) submission. As a practical matter, clearance often takes longer, and clearance is never assured.

Although many 510(k) premarket notifications are cleared without clinical data, the FDA may require further information, including clinical data, to make a determination regarding substantial equivalence, which may significantly prolong the review process. If the FDA agrees that the device is substantially equivalent to a predicate device, it will grant clearance to commercially market the device. If the FDA determines that the device is not “substantially equivalent” to a predicate device, or if the device is automatically classified

into Class III, the device sponsor must then fulfill the much more rigorous premarketing requirements of the PMA process, or seek reclassification of the device through the de novo process.

After a device receives 510(k) clearance, any modification, including modification to or deviation from design, manufacturing processes, materials, packaging and sterilization that could significantly affect its safety or effectiveness, or that would constitute a new or major change in its intended use, may require a new 510(k) clearance or, depending on the modification, could require a PMA application. The FDA requires each manufacturer to make this determination initially, but the FDA can review any such decision and can disagree with a manufacturer’s determination. If the FDA requires a new 510(k) clearance or approval of a PMA application for any modifications to a previously-clearedpreviously cleared product, the applicant may be required to cease marketing or recall the modified device until clearance or approval is received. In addition, in these circumstances, the FDA can impose significant regulatory fines or penalties for failure to submit the requisite 510(k) or PMA application(s).

Medical device types that the FDA has not previously classified as Class I, II, or III are automatically classified into Class III regardless of the level of risk they pose. The Food and Drug Administration Modernization Act of 1997 established a new route to market for low to moderate risk medical devices that are automatically placed into Class III due to the absence of a predicate device, called the “Request for Evaluation of Automatic Class III Designation,” or the de novo classification procedure.

The de novo classification procedure allows a manufacturer whose novel device is automatically classified into Class III to request down-classification of its medical device into Class I or Class II on the basis that the device presents low or moderate risk, rather than requiring the submission and approval of a PMA application. Prior to the enactment of the Food and Drug Administration Safety and Innovation Act of 2012 ("FDASIA"(the "FDASIA"), a medical device could only be eligible for de novo classification if the manufacturer first submitted a 510(k) premarket notification and received a determination from the FDA that the device was not substantially equivalent. The FDASIA streamlined the de novo classification pathway by permitting manufacturers to request de novo classification directly without first submitting a 510(k) premarket notification to the FDA and receiving a not substantially equivalent determination. Under the FDASIA, the FDA is required to classify the device within 120 days following receipt of the de novo application, though in practice the process may take significantly longer. If the manufacturer seeks reclassification into Class II, the manufacturer must include a draft proposal for Special Controls that are necessary to provide a reasonable assurance of the safety and effectiveness of the medical device. In addition, the FDA may reject the reclassification petition if it identifies a legally marketed predicate device that would be appropriate for a 510(k) or determines that the device is not low to moderate risk or that General Controls would be inadequate to control the risks and Special Controls cannot be developed.

PMA Pathway

We must submit a PMA if a device cannot be cleared through the 510(k) clearance or de novo process. A PMA must be supported by extensive data, including, but not limited to, technical information, preclinical data, clinical trial data, manufacturing data, and labeling, to demonstrate to the FDA’s satisfaction the safety and efficacy of the device for its intended use.

Following receipt of a PMA, the FDA conducts an administrative review to determine whether the application is sufficiently complete to permit a substantive review. If it is not, the agency will refuse to file the PMA. If it is, the FDA will accept the application for filing and begin the review. The FDA, by statute and by regulation, has 180 days to review a filed PMA, although the review of an application more often occurs over a significantly longer period of time. During this review period, the FDA may request additional information or clarification of information already provided, and the FDA may issue a major deficiency letter to the applicant, requesting the applicant’s response to deficiencies communicated by the FDA. The FDA considers a PMA or PMA supplement to have been voluntarily withdrawn if an applicant fails to respond to an FDA request for information (e.g., major deficiency letter) within a total of 360 days. Before approving or denying a PMA, an FDA advisory panel may review the PMA at a public meeting and provide the FDA with the committee’s recommendation on whether the FDA should approve the submission, approve it with specific conditions, or not approve it. The FDA is not bound by the recommendations of an advisory panel, but it considers such recommendations carefully when making decisions. Prior to approval of a PMA, the FDA may conduct a bioresearch monitoring inspection of the clinical trial data and clinical trial sites, and a QSR inspection of the manufacturing facility and processes. The FDA can delay, limit, or deny approval of a PMA for many reasons, including:

16

If the FDA evaluation of a PMA is favorable, the FDA will issue either an approval letter or an approvable letter, theletter. The latter of which usually contains a number of conditions that must be met in order to secure final approval of the PMA. When and if those conditions have

been fulfilled to the satisfaction of the FDA, the agency will issue a PMA approval letter authorizing commercial marketing of the device, subject to the conditions of approval and the limitations established in the approval letter. If the FDA’s evaluation of a PMA or manufacturing facilities is not favorable, the FDA will deny approval of the PMA or issue a not approvable letter. The FDA also may determine that additional tests or clinical trials are necessary, in which case the PMA approval may be delayed for several months or years while the trials are conducted and data are submitted in an amendment to the PMA, or the PMA is withdrawn and resubmitted when the data are available. The PMA process can be expensive, uncertain, and lengthy and a number of devices for which the FDA approval has been sought by other companies have never been approved by the FDA for marketing.

New PMAs or PMA supplements may be required for modifications to the manufacturing process, equipment or facility, quality control procedures, sterilization, packaging, expiration date, labeling, device specifications, components, materials or design of a device that has been approved through the PMA process. PMA supplements often require submission of the same type of information as an initial PMA, except that the supplement is limited to information needed to support any changes from the device covered by the approved PMA and may or may not require as extensive technical or clinical data or the convening of an advisory panel, depending on the nature of the proposed change.

In approving a PMA, as a condition of approval, the FDA may also require some form of postmarket studies or postmarket surveillance, whereby the applicant follows certain patient groups for a number of years and makes periodic reports to the FDA on the clinical status of those patients when necessary to protect the public health or to provide additional or longer term safety and effectiveness data for the device. The FDA may require postmarket surveillance for certain devices approved under a PMA or cleared under a 510(k) notification, such as implants or life-supporting or life-sustaining devices used outside a device user facility, devices where the failure of which would be reasonably likely to have serious adverse health consequences, or devices expected to have significant use in pediatric populations. The FDA may also approve a PMA with other post-approval conditions intended to ensure the safety and effectiveness of the device, such as, among other things, restrictions on labeling, promotion, sale, distribution, and use.

Clinical Trials

Clinical trials are almost always required to support a PMA and are sometimes required for a 510(k) premarket notification. In the United States, these trials often require submission of an application for an investigational device exemption ("IDE") if the investigation involves a significant risk device. Some types of studies deemed to present “non-significant risk” are deemed to have an approved IDE—without affirmative submission of an IDE application to the FDA—once certain requirements are addressed and institutional review board ("IRB") approval is obtained. The IDE application must be supported by appropriate data, such as animal and laboratory testing results, showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. The IDE must be approved in advance by the FDA for a specified number of patients, unless the product candidate is deemed a non-significant risk device and is eligible for more abbreviated IDE requirements. Clinical trials for a significant risk device may begin once the IDE application is approved by the FDA and appropriate IRBs at the clinical trial sites. Submission of an IDE will not necessarily result in the ability to commence clinical trials, and although the FDA’s approval of an IDE allows clinical testing to go forward for a specified number of subjects, it does not bind the FDA to accept the results of the trial as sufficient to prove the product’s safety and efficacy, even if the trial meets its intended success criteria.

Future clinical trials involving our product candidates will most likely require that we obtain an IDE from the FDA prior to commencing clinical trials and that the trial be conducted under the oversight of IRBs at the clinical trial sites. All clinical trials must be conducted in accordance with the FDA’s IDE regulations that govern investigational device labeling, prohibit promotion, and specify an array of recordkeeping, reporting and monitoring responsibilities of study sponsors and study investigators. Clinical trials must further comply with the FDA’s Good Clinical Practices ("GCP") requirements for IRB approval and for informed consent and other human subject protections. Required records and reports are subject to inspection by the FDA. The results of clinical testing may be unfavorable, or, even if the intended safety and efficacy success criteria are achieved, may not be considered sufficient for the FDA to grant marketing approval or clearance of a product candidate.

Breakthrough Devices and Safer Technologies Programs

The Breakthrough Devices Program is a voluntary program intended to expedite the review, development, assessment and review of certain medical devices that provide for more effective treatment or diagnosis of life-threatening or irreversibly debilitating human diseases or conditions for which no approved or cleared treatment exists or that offer significant advantages over existing approved or

17

cleared alternatives. For Breakthrough Devices, the FDA intends to provide interactive and timely communication with the sponsor during device development and throughout the review process. The FDA also intends to assign staff to be available within a reasonable time to address questions by institutional review committees concerning the conditions and clinical testing expectations applicable to the investigational use of a Breakthrough Device. In addition, all submissions for devices designated as Breakthrough Devices will receive priority review, meaning that the review of the submission is placed at the top of the appropriate review queue and receives additional review resources, as needed.

In January 2021, the FDA released final guidance on the Safer Technologies Program ("STeP"), which is intended for medical devices that treat or diagnose diseases or conditions that are less serious than those eligible for the Breakthrough Devices Program, including non-life-threatening or reasonably reversible conditions. STeP is modeled after the Breakthrough Devices Program and is intended to provide similar benefits, including expedited development and FDA review of submissions, for medical devices and device-led combination products that are likely to offer a safer treatment or diagnosis as compared to currently available alternatives.

Postmarket Requirements—U.S.

After the FDA permits a device to enter commercial distribution, numerous regulatory requirements continue to apply. These include:

Additionally, once devices are commercialized, manufacturers are subject to unannounced inspections by the FDA to determine compliance with the QSR, which cover the methods and the facilities and controls for the design, manufacture, testing, production, processes, controls, quality assurance, labeling, packaging, distribution, installation and servicing of finished devices intended for human use. The QSR also requires, among other things, maintenance of a device master file, device history file, and complaint files. Manufacturers are subject to periodic scheduled or unscheduled inspections by the FDA. A failure to maintain compliance with the QSR requirements could result in the shut-down of, or restrictions on, manufacturing operations and the recall or seizure of products. The discovery of previously unknown problems with products, including unanticipated adverse events or adverse events of increasing severity or frequency, whether resulting from the use of the device within the scope of its clearance or approval or off-label by a physician in the practice of medicine, could result in restrictions on the device, including the removal of the product from the market or voluntary or mandatory device recalls. In addition, the FDA can issue warning letters or untitled letters, impose injunctions, suspend regulatory clearance or approvals, ban certain medical devices, detain or seize adulterated or misbranded medical devices, order repair, replacement or refund of these devices, and require notification of health professionals and others with regard to medical

18

devices that present unreasonable risks of substantial harm to the public health. The FDA may also initiate action for civil penalties and/or criminal prosecution of such violations.

There are also certain requirements of state, local, and foreign governments that must be complied with in the manufacturing and marketing of our products once we have the appropriate marketing approvals. We will need to maintain customer complaint files, record all lot numbers of disposable products, and conduct periodic audits to assure compliance with applicable regulations. We will place special emphasis on customer training and advise all customers that device operation should be undertaken only by qualified

personnel. In addition to laws and regulations in the United States, we are subject to a variety of laws and regulations in other jurisdictions governing, among other things, clinical trials and any commercial sales and distribution of our product candidates.

Postmarket Requirements—EU

The regulatory review process varies from country to country and may in some cases require the submission of clinical data. Our international sales will be subject to regulatory requirements in the countries in which our product candidates are sold. In addition, the EU has adopted the EU Medical Device Regulation (EU 2017/745) (the “EU MDR”) which imposes stricter requirements for the marketing and sale of medical devices than in the U.S., including in the area of clinical evaluation requirements, quality systems and post-market surveillance. The transition period provided for in the EU MDR for existing CE certifications issued under the previous Medical Devices Directive will end on May 26, 2024. For certain medical devices, the transition period was extended, ending between December, 31, 2026 and December 31, 2028, depending on the class of the device and the fulfillment of certain additional conditions. (Regulation (EU) 2023/607). Complying with these regulations may require us to incur significant expenditures. Failure to meet these regulatory requirements could adversely impact our business in the EU and other regions that tie their product registrations to the EU requirements.

Drug and Biologics Regulation

Premarket Requirements—U.S.

Drugs and biologics are regulated under the FD&C Act and, for biologics, the Public Health Service Act (“PHSA”). Generally, a new drug may be marketed in the United States only if the FDA has approved a New Drug Application ("NDA") containing substantial evidence that the new drug is safe and effective for its intended use. A new biologic may generally only be marketed in the United States if the FDA has approved a Biologics License Application ("BLA") containing substantial evidence that the biologic is safe, pure, and potent for its intended use. The results of preclinical studies and clinical trials, along with information regarding the manufacturing process, analytical tests conducted on the chemistry of the drug, proposed labeling and other relevant information are submitted to the FDA as part of an NDA/BLA, and FDA review and approval of the NDA/BLA is necessary prior to any commercial marketing or sale of a drug or biologic in the United States.

The process generally required by the FDA before a biologic or drug product candidate may be marketed in the United States involves the following:

Preclinical Testing

Before testing any compound or biologic in human subjects in the United States, we must generate extensive preclinical data. Preclinical testing generally includes laboratory evaluation of product chemistry and formulation, as well as toxicological and

pharmacological studies in several animal species to assess the quality and safety of the product candidate. Certain animal studies must be performed in compliance with the FDA’s GLP regulations and the U.S. Department of Agriculture’s Animal Welfare Act.

IND Submission

Human clinical trials for drugs or biologics in the United States cannot commence until an IND is submitted and becomes effective. A company must submit preclinical testing results, together with manufacturing information and analytical data, to the FDA as part of the IND, and the FDA must evaluate whether there is an adequate basis for testing the drug in initial clinical studies in human volunteers. The sponsor will also include a protocol detailing, among other things, the objectives of the initial clinical trial, the parameters to be used in monitoring safety, and the effectiveness criteria to be evaluated, if the initial clinical trial lends itself to an efficacy evaluation. Some preclinical testing may continue even after the IND is submitted. An IND will automatically become effective 30 days after receipt by the FDA, unless before that time the FDA raises concerns or questions related to the proposed clinical studies. In such a case, the IND may be placed on clinical hold and the IND sponsor and the FDA must resolve any outstanding concerns or questions before clinical studies can begin. Once human clinical trials have commenced, the FDA may stop the clinical trials by placing them on partial or full “clinical hold” because of concerns about the safety of the product candidate being tested, or for other reasons.

Clinical Trials

Clinical trials involve the administration of the drug to healthy human volunteers or to patients, under the supervision of a qualified investigator. The conduct of clinical trials is subject to extensive regulation, including compliance with the FDA’s bioresearch monitoring regulations and GCP requirements, which establish standards for conducting, recording data from, and reporting the results of, clinical trials, and are intended to assure that the data and reported results are credible and accurate, and that the rights, safety, and well-being of study participants are protected. Clinical trials must be conducted under protocols that detail the study objectives, parameters for monitoring safety, and the efficacy criteria, if any, to be evaluated. Each protocol is reviewed by the FDA as part of the IND. In addition, each clinical trial must be reviewed and approved by, and conducted under the auspices of, an IRB. Companies sponsoring the clinical trials, investigators, and IRBs also must comply with, as applicable, regulations and guidelines for obtaining informed consent from the study subjects, following the protocol and investigational plan, adequately monitoring the clinical trial, and timely reporting of adverse events. Foreign studies conducted under an IND must meet the same requirements that apply to studies being conducted in the United States. Data from a foreign study not conducted under an IND may be submitted in support of an NDA or BLA if the study was conducted in accordance with GCP requirements and the FDA is able to validate the data.

A study sponsor is required to publicly post certain details about clinical trials and clinical trial results on government or independent websites (such as http://clinicaltrials.gov). Human clinical trials typically are conducted in three or four sequential phases, although the phases may overlap with one another:

A pivotal trial is a clinical study that is designed to generate substantial evidence of product candidate’s safety and efficacy to meet regulatory agency requirements and serve as the basis for approval of the product candidate. Generally, pivotal trials are Phase 3 trials, but the FDA may accept results from Phase 2 trials if the trial design provides a well-controlled and reliable assessment of clinical benefit, particularly in situations where there is an unmet medical need and the results are sufficiently robust.

The sponsoring company, the FDA, or the IRB may suspend or terminate a clinical trial at any time on various grounds, including a finding that the subjects are being exposed to an unacceptable health risk. Further, success in early-stageearly stage clinical trials does not assure success in later-stage clinical trials. Data obtained from clinical activities are not always conclusive and may be subject to alternative interpretations that could delay, limit, or prevent regulatory approval. Additionally, some clinical studies are overseen by an independent group of qualified experts organized by the clinical study sponsor, known as a data safety monitoring board or data monitoring committee. This group provides authorization for whether or not a trial may move forward at designated check points based on access to certain data from the trial. We may also suspend or terminate a clinical study based on safety or efficacy concerns, evolving business objectives and/or competitive climate.

During the development of a new drug or biologic, sponsors may seek opportunities to meet with the FDA at certain points. These points may be prior to submission of an IND, at the end of Phase 2, and before an NDA or BLA is submitted. Meetings at other times may be requested. These meetings can provide an opportunity for the sponsor to share information about the data gathered to date, for the FDA to provide advice, and for the sponsor and the FDA to reach agreement on the next phase of development. For example, sponsors typically use the meetings at the end of the Phase 2 trial to discuss Phase 2 clinical results and present plans for the pivotal Phase 3 clinical trial that they believe will support approval of the new drug or biologic.

A sponsor may choose, but is not required, to conduct a foreign clinical study under an IND. When a foreign clinical study is conducted under an IND, all IND requirements must be met unless waived. When the foreign clinical study is not conducted under an IND, the sponsor must ensure that the study complies with certain FDA regulatory requirements in order to use the study as support for an IND or application for marketing approval or licensure, including that the study was conducted in accordance with GCP, including review and approval by an independent ethics committee and use of proper procedures for obtaining informed consent from subjects, and the FDA is able to validate the data from the study through an onsite inspection if the FDA deems such inspection necessary. The GCP requirements encompass both ethical and data integrity standards for clinical studies.

Concurrent with clinical trials, companies usually complete additional animal studies and must also develop additional information about the chemistry and physical characteristics of the drug and finalize a process for manufacturing the product in commercial quantities in accordance with cGMP requirements. The manufacturing process must be capable of consistently producing quality batches of the product candidate and, among other things, the manufacturer must develop methods for testing the identity, strength, quality, and purity of the final drug. In addition, appropriate packaging must be selected and tested and stability studies must be conducted to demonstrate that the product candidate does not undergo unacceptable deterioration over its shelf life. While the IND is active and before approval, progress reports summarizing the results of the clinical trials and nonclinical studies performed since the last progress report must be submitted at least annually to the FDA, and written IND safety reports must be submitted to the FDA and investigators for serious and unexpected suspected adverse events, findings from other studies suggesting a significant risk to humans exposed to the same or similar drugs, findings from animal or in vitro testing suggesting a significant risk to humans, and any clinically important increased incidence of a serious suspected adverse reaction compared to that listed in the protocol or investigator brochure.

There are also requirements governing the reporting of ongoing clinical trials and completed trial results to public registries. Sponsors of certain clinical trials of FDA regulated products are required to register and disclose specified clinical trial information, which is publicly available at www.clinicaltrials.gov. Information related to the product, patient population, phase of investigation, trial sites and investigators and other aspects of the clinical trial is then made public as part of the registration. Sponsors are also obligated to disclose certain results of their clinical trials after completion.

NDA/BLA Submission and Review

After completing clinical testing of an investigational drug or biologic, a sponsor must prepare and submit an NDA or BLA for review and approval by the FDA. The NDA is a comprehensive, multi-volume application that includes, among other things, the results of preclinical and clinical studies, information about the drug’s composition, and plans for manufacturing, packaging, and labeling the drug. For certain product candidates, such as immunotherapeutic antibodies, this information is submitted in a BLA. Data can come from company-sponsored clinical studies intended to test the safety and effectiveness of a use of the product candidate, or from a number of alternative sources, including studies initiated by investigators. Under federal law, the submission of most NDAs and BLAs is subject to an application user fee, and the sponsor of an approved NDA or BLA is also subject to annual prescription drug program fees. These fees are typically increased annually. A waiver of user fees may be obtained under certain limited circumstances.

When an NDA or BLA is submitted, the FDA conducts a preliminary review to determine whether the application is sufficiently complete to be accepted for filing. If it is not, the FDA may refuse to file the application and request additional information, in which case the application must be resubmitted with the supplemental information, and review of the application is delayed.

FDA performance goals generally provide for action on a standard NDA or an original BLA submission within 10 months of the 60-day filing date, but that goal may be extended in certain circumstances. Moreover, the review process is often significantly extended

by FDA requests for additional information or clarification. Before approving a BLA or NDA, the FDA typically will inspect the facility or facilities at which the product candidate is manufactured. The FDA will not approve the application unless it determines that the manufacturing processes and facilities are in compliance with cGMP requirements and adequate to assure consistent production of the product candidate within required specifications. Additionally, before approving a BLA or NDA, the FDA will typically inspect one or more clinical sites or investigators to assure compliance with GCP requirements. If the FDA determines that the application, clinical data, manufacturing process, or manufacturing facilities are not acceptable, it will outline the deficiencies in the submission and often will request additional testing or information. Notwithstanding the submission of any requested additional information, the FDA ultimately may decide that the application does not satisfy the regulatory criteria for approval.

21

As part of its review, the FDA may refer an NDA or BLA to an advisory committee for evaluation and a recommendation as to whether the application should be approved. Typically, an advisory committee is a panel of independent experts, including clinicians and other scientific experts, that reviews, evaluates and provides a recommendation as to whether the application should be approved and under what conditions. Although the FDA is not bound by the recommendation of an advisory committee, the agency carefully considers such recommendations when making decisions. The FDA may also determine that a risk evaluation and mitigation strategy ("REMS") is necessary to ensure that the benefits of a new product candidate outweigh its risks, and the product candidate can therefore be approved. A REMS may include various elements, ranging from medication guides, physician communication plans, or elements to assure safe use, such as restricted distribution methods, patient registries and other risk minimization tools, depending on what the FDA considers necessary for the safe use of the drug.

After review of an NDA or BLA, the FDA may decide to not approve the application and issue a Complete Response letter outlining the deficiencies in the submission. The Complete Response letter also may request additional information, including additional preclinical or clinical data. Even if such additional information and data are submitted, the FDA may decide that the NDA or BLA still does not meet the standards for approval. Data from clinical trials are not always conclusive and the FDA may interpret data differently than the sponsor. Obtaining regulatory approval often takes a number of years, involves the expenditure of substantial resources, and depends on a number of factors, including the severity of the disease in question, the availability of alternative treatments, and the risks and benefits demonstrated in clinical trials. Additionally, as a condition of approval, the FDA may impose restrictions that could affect the commercial success of a drug or require post-approval commitments, including the completion within a specified time period of additional Phase 4 clinical studies.

In addition, the Pediatric Research Equity Act ("PREA") requires a sponsor to conduct pediatric clinical trials for most drugs and biologics, including for a new active ingredient, new indication, new dosage form, new dosing regimen, or new route of administration. Under PREA, original NDAs, BLAs, and supplements thereto must contain a pediatric assessment unless the sponsor has received a deferral or waiver. The required assessment must evaluate the safety and effectiveness of the product for the claimed indications in all relevant pediatric subpopulations and support dosing and administration for each pediatric subpopulation for which the product is safe and effective. The sponsor or FDA may request a deferral of pediatric clinical trials for some or all of the pediatric subpopulations. A deferral may be granted for several reasons, including a finding that the drug or biologic is ready for approval for use in adults before pediatric clinical trials are complete or that additional safety or effectiveness data needs to be collected before the pediatric clinical trials begin.

Post-approval modifications to the drug or biologic product candidate, such as changes in indications, labeling, or manufacturing processes or facilities, may require a sponsor to develop additional data or conduct additional preclinical or clinical trials, to be submitted in a new or supplemental NDA or BLA, which would require FDA approval.

Expedited Development and Review Programs

The FDA has established a number of programs intended to expedite the development and review of products intended to treat serious and life-threatening diseases or conditions. First, the FDA has a Fast Track program that is designed to expedite or facilitate the process for reviewing new drug products intended to treat a serious or life-threatening disease or condition and data demonstrate the potential to address unmet medical needs for the disease or condition. Fast Track designation applies to the product and the specific indication for which it is being studied. For a Fast Track-designated product, the FDA may consider for review sections of the NDA or BLA on a rolling basis before the complete application is submitted.

A product, including a product with a Fast Track designation, may also be eligible for other types of FDA programs intended to expedite development and review, such as priority review and accelerated approval. A product is eligible for priority review if there is evidence that it has the potential to provide safe and effective therapy where no satisfactory alternative therapy exists orwould be a significant improvement in the treatment, diagnosis, or prevention of a disease compared to marketed products. The FDA will attempt to direct additional resources to the evaluation of an application for a new drug designated for priority review in an effort to facilitate the review. The FDA endeavors to review applications with priority review designations within six months of the filing date as compared to 10 months for review of original BLAs and new molecular entity NDAs under its standard review goals.

In addition, a product may be eligible for accelerated approval. Drug and biologic products intended to treat serious or life-threatening diseases or conditions may be eligible for accelerated approval upon a determination that the product has an effect on a surrogate endpoint that is reasonably likely to predict clinical benefit, or on a clinical endpoint that can be measured earlier than irreversible morbidity or mortality but that is reasonably likely to predict an effect on irreversible morbidity or mortality or other clinical benefit, taking into account the severity, rarity, or prevalence of the condition and the availability or lack of alternative treatments. As a condition of accelerated approval, the FDA may require that a sponsor of a drug receiving accelerated approval perform confirmatory clinical trials after approval. Under the Food and Drug Omnibus Reform Act of 2022, the FDA may require, as appropriate, that such studies be underway prior to approval or within a specific time period after the date of approval for a product granted accelerated approval. In addition, the FDA currently requires as a condition for accelerated approval pre-approval of promotional materials, which could adversely impact the timing of the commercial launch of the product. The FDA also has increased authority for expedited procedures to withdraw approval of a product or indication approved under accelerated approval if the sponsor fails to conduct the required post-marketing studies or if such studies fail to verify the predicted clinical benefit. Fast Track designation, priority review, and accelerated approval do not change the standards for approval but may expedite the development or approval process.

22

The FDA also designates certain products as “breakthrough therapies,” if the product is intended, alone or in combination with one or more other products, to treat a serious or life-threatening disease or condition and preliminary clinical evidence indicates that the product may demonstrate substantial improvement over existing therapies on one or more clinically significant endpoints, such as substantial treatment effects observed early in clinical development. This designation includes all of the Fast Track program features, as well as more intensive FDA interaction and guidance. The Breakthrough Therapy Designation is a distinct status from both accelerated approval and priority review, which can also be granted to the same drug if relevant criteria are met. All requests for breakthrough therapy designation will be reviewed within 60 days of receipt, and the FDA will either grant or deny the request.

Fast track designation, priority review, accelerated approval, and breakthrough therapy designation do not change the standards for approval and may not result in fast or more efficient review.

Hatch-Waxman Act

The Drug Price Competition and Patent Term Restoration Act of 1984 (the "Hatch-Waxman Act") establishes two abbreviated approval pathways for pharmaceutical products that are in some way follow-on or bioequivalent versions of drugs approved through the NDA process.

Generic Drugs

A generic version of an approved drug is approved by means of an abbreviated new drug application ("ANDA"). An ANDA is a comprehensive submission that contains, among other things, data, and information pertaining to the active pharmaceutical ingredient, drug product formulation, specifications and stability of the generic drug, as well as analytical methods, manufacturing process validation data and quality control procedures. Premarket applications for generic drugs are termed abbreviated because they generally do not include preclinical and clinical data to demonstrate safety and effectiveness. Instead, a generic applicant must demonstrate that its product performs in the same manner as, or is bioequivalent to, the innovator drug, also referred to as a reference listed drug ("RLD")., and is equivalent to the RLD with respect to the active ingredients, the route of administration, the dosage form, quality and performance characteristics, the strength of the drug, and intended use. In certain situations, an applicant may obtain ANDA approval of a generic product with a strength or dosage form that differs from a referenced innovator drug pursuant to the filing and approval of an ANDA Suitability Petition.suitability petition. The FDA will approve the generic product as suitable for an ANDA if it finds that the generic product does not raise new questions of safety and effectiveness as compared to the innovator product. A product is not eligible for ANDA approval if the FDA determines that it is not bioequivalent to the referenced innovator drug, if it is intended for a different use, or if it is not subject to an approved Suitability Petition. However, such a product might be approved under an NDA, with supportive data from clinical trials.

505(b)(2) NDAs

Section 505(b)(2) of the FD&C Act provides an alternate regulatory pathway to obtain FDA approval for product candidates that represent modifications to formulations or uses of previously approved drug products. Specifically, Section 505(b)(2) permits the filing of an NDA where at least some of the information required for approval comes from studies not conducted by or for the applicant and for which the applicant has not obtained a right of reference. The applicant may rely to some extent upon the FDA’s findings of safety and effectiveness for an approved product that acts as the RLD and submit its own product-specific data—which may include data from preclinical studies or clinical trials conducted by or on behalf of the applicant—to address differences between the product candidate and the RLD. Unlike an ANDA, this does not excuse the sponsor from demonstrating the proposed product candidate’s safety and effectiveness. Rather, the sponsor is permitted to rely to some degree on the FDA’s finding that the RLD is safe and effective, and must submit its own product candidate-specific data of safety and effectiveness to an extent necessary because of the differences between the products. An NDA approved under Section 505(b)(2) may in turn serve as an RLD for subsequent applications from other sponsors.

RLD Patents

In seeking approval for a drug through an NDA, including a 505(b)(2) NDA, applicants are required to list with the FDA certain patents whose claims cover the applicant’s product. Upon approval of an NDA, each of the patents listed in the application for the drug is then published in the FDA publication, Approved Drug Products with Therapeutic Equivalence Evaluations, which is referred to as the Orange Book. Any applicant who files an ANDA seeking approval of a generic equivalent version of a drug listed in the Orange Book or a 505(b)(2) NDA referencing a drug listed in the Orange Book must certify to the FDA that (1) no patent information on the drug product that is the subject of the application has been submitted to the FDA; (2) such patent has expired; (3) the date on which such patent expires; or (4) such patent is invalid or will not be infringed upon by the manufacture, use or sale of the drug product for which the application is submitted. This last certification is known as a paragraph IV certification. A notice of the paragraph IV certification must be provided to each owner of the patent that is the subject of the certification and to the holder of the approved NDA to which the ANDA or 505(b)(2) application refers. The applicant may also elect to submit a “section viii” statement certifying that its proposed label does not contain (or carves out) any language regarding the patented method-of-use rather than certify to a listed method-of-use patent. If the reference NDA holder and patent owners assert a patent challenge directed to one of the Orange Book listed patents within 45 days of the receipt of the paragraph IV certification notice, the FDA is prohibited from

23

approving the application until the earlier of 30 months from the receipt of the paragraph IV certification expiration of the patent, settlement of the lawsuit or a decision in the infringement case that is favorable to the applicant. The ANDA or 505(b)(2) application also will not be approved until any applicable non-patent exclusivity listed in the Orange Book for the branded reference drug has expired as described in further detail below.

Regulatory Exclusivities

The Hatch-Waxman Act provides periods of regulatory exclusivity for products that would serve as RLDs for an ANDA or 505(b)(2) application. For example, a pharmaceutical manufacturer may obtain five years of non-patent exclusivity upon NDA approval of a new chemical entity ("NCE")—a drug that contains an active moiety that has not been approved by the FDA in any other NDA. An “active moiety” is defined as the molecule or ion responsible for the drug substance’s physiological or pharmacologic action. During this five-year exclusivity period, the FDA may not accept for filing any ANDA seeking approval of a generic version of that drug or any 505(b)(2) application for a drug with the same active moiety. An ANDA or 505(b)(2) application may be submitted after four years, however, if the sponsor of the application makes a paragraph IV certification.

A product that is not an NCE, including a product approved through a 505(b)(2) NDA, may qualify for a three-year period of exclusivity if the NDA contains new clinical data, derived from studies conducted by or for the sponsor (other than bioavailability or bioequivalence studies), that were essential for approval. In that instance, the exclusivity period does not preclude filing or review of the ANDA or 505(b)(2) application; rather, the FDA is precluded from granting final approval to the ANDA or 505(b)(2) application until three years after approval of the RLD. Additionally, the exclusivity applies only to the conditions of approval that required submission of the clinical data. For example, if an NDA is submitted for a product candidate that is not an NCE, but that seeks approval for a new indication, and clinical data were required to demonstrate the safety or effectiveness of the product candidate for that new application, the FDA could not approve an ANDA or 505(b)(2) application for another product candidate with that active moiety for that use.

The Biologics Price Competition and Innovation Act

The Patient Protection and Affordable Care Act, as amended by the Healthcare and Education Reconciliation Act of 2010, (collectively, the "ACA") includes a subtitle called the Biologics Price Competition and Innovation Act ("BPCIA"(the "BPCIA"), which authorizes the FDA to license a biological product candidate that is biosimilar to or interchangeable with an FDA-licensed biologic through an abbreviated pathway. Biosimilarity, which requires that there be no clinically meaningful differences between the biological product and the reference product in terms of safety, purity, and potency, can be shown through analytical studies, animal studies, and a clinical study or studies. Interchangeability requires that a product is biosimilar to the reference product and the product must demonstrate that it can be expected to produce the same clinical results as the reference product in any given patient and, for products that are administered multiple times to an individual, the biologic and the reference biologic may be alternated or switched after one has been previously administered without increasing safety risks or risks of diminished efficacy relative to exclusive use of the reference biologic. Complexities associated with the larger, and often more complex, structures of biological products, as well as the processes by which such products are manufactured, pose significant hurdles to implementation of the abbreviated approval pathway that are still being addressed by the FDA.

The BPCIA establishes criteria for determining that a product candidate is biosimilar to an already-licensed biologic, or reference product, and establishes a process by which a BLA for a biosimilar product candidate is submitted, reviewed, and licensed. The BPCIA provides periods of exclusivity that protect a reference product from biosimilars competition. Under the BPCIA, the FDA may not accept a biosimilar application for review until four years after the date of first licensure of the reference product, and the biosimilar may not be licensed until at least 12 years after the reference product’s approval. During this 12-year period of exclusivity,

another company may still market a competing version of the reference product if the FDA approves a BLA for the competing product containing the sponsor’s own preclinical data and data from adequate and well-controlled clinical trials to demonstrate the safety, purity, and potency of their product.

Additionally, the BPCIA establishes procedures by which the biosimilar applicant provides information about its application and product candidate to the reference product sponsor, and by which information about potentially relevant patents may be shared and litigation over patents may proceed in advance of approval. The timing of final FDA approval of a biosimilar for commercial distribution depends on a variety of factors, including whether the manufacturer of the reference product is entitled to one or more statutory exclusivity periods, during which time the FDA is prohibited from approving any product candidates that are biosimilar to the branded product. The BPCIA also provides a period of exclusivity for the first biosimilar determined by the FDA to be interchangeable with the reference product. To date, the FDA has not approved an interchangeable biosimilar product, and atproduct.At this juncture, it is unclear whether products deemed “interchangeable” by the FDA will, in fact, be readily substituted by pharmacies, as these substitution practices are governed by state pharmacy law.

24

The contours of the BPCIA continue to be defined as the statute is implemented over a period of years. This likely will be accomplished by a variety of means, including decisions related to the statute by the relevant federal courts. The FDA has to date issued various guidance documents and other materials indicating the agency’s thinking regarding a number of issues implicated by the BPCIA. Additionally, the FDA’s approval of a number of biosimilar applications in recent years has helped define the agency’s approach to certain issues. However, the ultimate impact, implementation, and meaning of the BPCIA remains subject to significant uncertainty.

Post-Approval Regulation of Drug and Biologic Products

Once a drug or biologic is approved, it and its manufacturer will be subject to continuing regulation by the FDA. If ongoing regulatory requirements are not met or if safety problems occur after a product reaches the market, the FDA may at any time withdraw product approval or take actions that would limit or suspend marketing. Additionally, the FDA may require post-marketing studies or clinical trials if new safety information develops.

Other Requirements

In addition, if we hold approved NDAs or BLAs and/or manufacture or distribute drug or biological products, we must comply with other regulatory requirements, including registration and listing, submitting annual reports, reporting information about adverse drug experiences, and maintaining certain records. Similar, and in some cases additional, requirements exist in other countries, including the EU.

EU Requirements

We must obtain the requisite marketing authorizations from regulatory authorities in foreign countries prior to the commencement of clinical trials or marketing of a product in those countries. Certain countries outside of the United States have a similar process that requires the submission of a clinical trial application ("CTA"), much like an IND, prior to the commencement of clinical trials. In the EU, for example, the conduct of clinical trials is currently governed by the EU Clinical Trials Regulation (EU) No. 536/2014 ("CTR"). The CTR replaced the Clinical Trials Directive 2001/20/EC ("Clinical Trials Directive") effective January 31, 2022, and introduced a complete overhaul of the existing regulation of clinical trials for medicinal products in the EU.

Under the new CTR, a sponsor may submit a single application for approval of a clinical trial through a centralized EU clinical trials portal. One national regulatory authority (the reporting EU Member State proposed by the applicant) will take the lead in validating and evaluating the application consult and coordinate with the other concerned Member States. If an application is rejected, it may be amended and resubmitted through the EU clinical trials portal. If an approval is issued, the sponsor may start the clinical trial in all concerned Member States. However, a concerned EU Member State may in limited circumstances declare an “opt-out” from an approval and prevent the clinical trial from being conducted in such Member State. The CTR also aims to streamline and simplify the rules on safety reporting, and introduces enhanced transparency requirements such as mandatory submission of a summary of the clinical trial results to the EU Database.Database (“CTIS”). The CTR includes a three-year transition period. Member states will work in CTIS immediately after the system has gone live. Since January 31, 2023, submission of initial clinical trial applications via CTIS is mandatory, and by January 31, 2025, all ongoing trials approved under the former Clinical Trials Directive will need to comply with the CTR and must be transitioned to CTIS.

The requirements and process governing the conduct of clinical trials, product licensing, pricing, and reimbursement may vary from country to country. In all cases in EU Member States, for example, the clinical trials must be conducted in accordance with GCP requirements, applicable regulatory requirements, and ethical principles that have their origin in the Declaration of Helsinki. Other EU requirements include regulations concerning marketing authorizations, pricing and reimbursement, patient rights in cross-border healthcare, advertising, and promotion, interactions with physicians, bribery, and corruption.

For other countries outside of the EU, such as countries in Eastern Europe, Central and South America, or Asia, the requirements governing the conduct of clinical trials, product licensing, pricing, and reimbursement vary from country to country. In all cases, again, the clinical trials are conducted in accordance with GCP requirements, applicable regulatory requirements, and ethical principles that have their origin in the Declaration of Helsinki.

If we fail to comply with applicable foreign regulatory requirements, we may be subject to, among other things, warning letters or untitled letters, injunctions, civil, administrative, or criminal penalties, monetary fines or imprisonment, suspension or withdrawal of regulatory approvals, suspension of ongoing clinical studies, refusal to approve pending applications or supplements to applications filed by us, suspension or the imposition of restrictions on operations, product recalls, the refusal to permit the import or export of our products or the seizure or detention of products.

Combination Products

A combination product is the combination of two or more regulated components, i.e., drug-device, biologic-device, drug-biologic, or drug-device-biologic, that are combined or mixed and produced as a single entity; packaged together in a single package or as a unit; or a drug, device, or biological product packaged separately that according to its investigational plan or proposed labeling is intended

25

for use only with an approved individually specified drug, device, or biological product where both are required to achieve the intended use, indication, or effect.

To determine which of the FDA center or centers will review a combination product candidate submission, companies may submit a request for assignment to the FDA. Those requests may be handled formally or informally. In some cases, jurisdiction may be determined informally based on FDA experience with similar products. However, informal jurisdictional determinations are not binding on the FDA. Companies also may submit a formal Request for Designation to the FDA Office of Combination Products. The Office of Combination Products will review the request and make its jurisdictional determination within 60 days of receiving a Request for Designation.

The FDA will determine which center or centers within the FDA will review the product candidate and under what legal authority the product candidate will be reviewed. Depending on how the FDA views the product candidates that are developed, the FDA may have aspects of the product candidate reviewed by the FDA’s Center for Biologics Evaluation and Research, Center for Devices and Radiological Health and Center for Drug Evaluation and Research, though one center will be designated as the center with primary jurisdiction, based on the product candidate’s primary mode of action. The FDA determines the primary mode of action based on the single mode of action that provides the most important therapeutic action of the combination product candidate—the mode of action expected to make the greatest contribution to the overall intended therapeutic effects of the combination product candidate. The review of such combination product candidates is often complex and time consuming, as the FDA may select the combination product candidate to be reviewed and regulated by one or multiple of the FDA centers identified above, which could affect the path to regulatory clearance or approval. Furthermore, the FDA may also require submission of separate applications to multiple centers.

We are developing certain product candidates that will be subject to regulation in the United States as combination products. We believe that the primary mode of action of these candidates is the drug or biologic component. We expect to seek approval for these candidates through submission of a BLA for biologic candidates and through submission of a NDA submitted under Section 505(b)(2) of the FD&C Act for small molecule candidates. Based on a pre-IND meeting, we do not expect that the FDA will require a separate marketing authorization for each constituent of these product candidates.

The post-market requirements that apply to the cleared or approved product will largely be aligned with the agency center determined to have primary jurisdiction over the product candidate and that provided marketing authorization, but manufacturers must also comply with certain post-market requirements with respect to the constituent parts of combination products. In April 2019, the FDA published a final guidance document entitled Compliance Policy for Combination Product Postmarketing Safety Reporting, which is intended to assist manufacturers of combination products comply with reporting requirements applicable to such products. In December 2019, the FDA issued draft guidance intended to clarify how sponsors of combination products can: establish the scientific relevance of information from another development program to support an application for the FDA approval of a combination product. In December 2020, the FDA issued final guidance on how sponsors of combination products can obtain feedback from the FDA on scientific and regulatory questions pertaining to the combination product. In January 2022, FDA issued a final guidance document on principles for premarket pathways for combination products. FDA has issued, and will continue to issue, guidance documents on the premarket and postmarket regulatory requirements applicable to combination products.

After issuing marketing authorizations, the FDA has discretion in determining post-approval compliance requirements for combination products and could thus require compliance with certain cGMP requirements as well as QSR requirements for device components of a combination product. Other post-market requirements analogous to those described above for medical devices and

drugs/biologics will also apply, depending on the application type and center overseeing regulation of the combination product, including:

Patent Term Restoration

Some of our U.S. patents may be eligible for limited patent term extension under the Hatch-Waxman Amendments. The Hatch-Waxman Amendments permit a patent restoration term of up to five years as compensation for patent term lost during product development and the FDA regulatory review process. However, patent term restoration cannot extend the remaining term of a patent beyond a total of 14 years from the product’s approval date. The patent term restoration period is generally one-half the time between the effective date of an IND or IDE and the submission date of an NDA, BLA, or PMA, plus the time between the submission date and the approval of that application. Only one patent applicable to an approved product is eligible for the extension and the application for the extension must be submitted prior to the expiration of the patent. The USPTO, in consultation with the FDA, reviews and approves the application for any patent term extension or restoration. Thus, for each approved product, we may apply for restoration of patent term for one of our related owned or licensed patents to add patent life beyond the original expiration date, depending on the expected length of the clinical studies and other factors involved in the filing of the relevant NDA, BLA or PMA.

HIPAA and Other Data Privacy and Security Laws

We are subject to data privacy and security regulations by both the federal government and the states in which we conduct our business. For example, the regulations promulgated under the Health Insurance Portability and Accountability Act of 1996

26

("HIPAA"), as amended by the Health Information Technology for Economic and Clinical Health Act of 2009 ("HITECH"), impose privacy, security and breach reporting obligations with respect to protected health information ("PHI") upon “covered entities” (health plans, healthcare clearinghouses and certain healthcare providers), and their respective “business associates,” individuals or entities that create, receive, maintain, or transmit PHI in connection with providing a service for or on behalf of a covered entity. Under HIPAA, covered entities must also enter into agreements with their business associates, that require the business associates to protect any PHI provided by the covered entity against improper use or disclosure, amongst other things. Additionally, HITECH mandates the reporting of certain breaches of PHI to the U.S. Department of Health and Human Services ("HHS"), affected individuals, and if the breach is large enough, the media.

HITECH makes specific HIPAA privacy and security requirements directly applicable to business associates. We are both a covered entity and a business associate of our covered entity customers.customers and collaborators. Under the terms of the business associate agreements into which we have entered, we have certain obligations regarding the use and disclosure of any PHI that may be provided to us, and we could incur significant liability if we do not meet such obligations.

HHS promulgated various requirements under HIPAA with which we must comply. HHS rules define standards for electronic transactions, which establish standards for common healthcare transactions, such as claims information, plan eligibility, payment information, and the use of electronic signatures. We must also follow standards for the privacy of PHI, which limit use and disclosure of most written and oral communications, including those in electronic form, regarding a patient’s past, present or future physical or mental health or condition, or disclosing healthcare provided to the individual or payment for that healthcare, if the individual may be identified from such information. In addition, HIPAA’s security standards require us to ensure the confidentiality, integrity, and availability of all electronic PHI we create, receive, maintain, or transmit, to protect against reasonably anticipated threats or hazards to the security of such information and to protect such information from unauthorized use or disclosure.

There are significant civil and criminal fines and other penalties that may be imposed for violating HIPAA. A covered entity or business associate is also liable for civil money penalties for a violation that is based on an act or omission of any of its agents, which may include a downstream business associate, as determined according to the federal common law of agency. HITECH also increased the civil and criminal penalties applicable to covered entities and business associates and gave state attorneys general new authority to

file civil actions for damages or injunctions in federal courts to enforce HIPAA and seek attorneys’ fees and costs associated with pursuing federal civil actions. To the extent that we submit electronic healthcare claims and payment transactions that do not comply with the electronic data transmission standards established under HIPAA and HITECH, payments to us may be delayed or denied.

In addition to applicability of HIPAA or other data privacy laws or regulations, failing to take what the Federal Trade Commission ("FTC") perceives to be appropriate steps to keep consumers’ personal information secure may result in the FTC bringing a claim that a company has engaged in unfair or deceptive acts or practices in or affecting commerce in violation of Section 5(a) of the Federal Trade Commission Act, ("FTCA"). The FTC expects a company’s data security measures to be reasonable and appropriate in light of the sensitivity and volume of consumer information it holds, the size and complexity of its business, and the cost of available tools to improve security and reduce vulnerabilities. Health information is considered sensitive data that merits stronger safeguards. In addition, state consumer protection laws, which may or may not be modeled on the FTCA, may provide state-law causes of action for allegedly unfair or deceptive acts or practices, among other things, including causes of action for alleged data privacy violations.

Moreover, various state and non-U.S. laws and regulations, such as California's Confidentiality of Medical Information Act, the California Consumer Privacy Act of 2018 ("CCPA"(the "CCPA"), as amended by the California Privacy Rights Act of 2020 ("CPRA"(the "CPRA"), and the EU General Data Protection Regulation (Regulation (EU) 2016/679) and related implementing laws in individual EU Member States (collectively, the "GDPR"), as well as the United Kingdom version of the GDPR (which combines the GDPR and the United Kingdom's Data Protection Act 2018) may govern the privacy and security of personal information in certain circumstances. Some of these laws and regulations are more stringent than HIPAA, and many differ from each other in significant ways and may not have the same effect, thus complicating compliance efforts. Failure to comply with these laws, where applicable (some information may be exempt from most of CCPA/CPRA if, for example, subject to HIPAA or California's Confidentiality of Medical Information Act, or may be jurisdictionally limited), can result in investigations, proceedings, or in the imposition of significant civil and/or criminal penalties, private litigation and private litigation.injunctive restrictions on data processing. Privacy and security laws, regulations, and other obligations are constantly evolving, and we could be exposed to additional obligations, further complicating compliance efforts.

In addition to applicability of HIPAA or other data privacy laws or regulations, failing to take what the Federal Trade Commission ("FTC") perceives to be appropriate steps to keep consumers’ personal information secure may result in the FTC bringing a claim that a company has engaged in unfair or deceptive acts or practices in or affecting commerce in violation of Section 5(a) of the Federal Trade Commission Act, (the "FTCA"). The FTC expects a company’s data security measures to be reasonable and appropriate in light of the sensitivity and volume of consumer information it holds, the size and complexity of its business, and the cost of available tools to improve security and reduce vulnerabilities. Health information is considered sensitive data that merits stronger safeguards. In addition, state consumer protection laws, which may or may not be modeled on the FTCA, may provide state-law causes of action for allegedly unfair or deceptive acts or practices, among other things, including causes of action for alleged data privacy violations.

Especially in the EU, thereThere has been increased attention to privacy and data protection issues in the EU as well, with the potential to directly affect our business. The GDPR, which went into effect on May 25, 2018, imposes penalties of up to EUR 20 million (approx. $24 million) or 4% of the total worldwide annual turnover of the preceding financial year, whichever is higher. The GDPR increased responsibility and liability in relation to personal data that we process. It also imposes a number of strict obligations and restrictions on the ability to process (processing includes collection, analysis and transfer of) personal data of individuals, in particular with respect to health data from clinical trials and adverse event reporting. The GDPR includes requirements relating to the legal basis of the processing (such as consent of the individuals to whom the personal data relates), the information provided to the individuals prior to processing their personal data, the notification obligations to the national data protection authorities, and the security and confidentiality of the personal data. EU Member States may also impose additional requirements in relation to the health, genetic and biometric data

27

through their national legislation. In addition, the GDPR imposes specific restrictions on the transfer of personal data to countries outside of the EU that are not considered by the European Commission as providing an adequate level of data protection (including the United States).protection. Appropriate safeguards are required to enable such transfers. Among the appropriate safeguards that can be used, the data exporter may use the standard contractual clauses (“SCCs”). When relying on SCCs, the data exporters are also required to conduct a transfer risk assessment to verify if anything in the law and/or practices of the third country may impinge on the effectiveness of the SCCs in the context of the transfer at stake and, if so, to identify and adopt supplementary measures that are necessary to bring the level of protection of the data transferred to the EU standard of essential equivalence. Where no supplementary measure is suitable, the data exporter should avoid, suspend or terminate the transfer. Regarding data transfers to the United States, the European Commission published an adequacy decision and the new EU-U.S. Data Privacy Framework entered into force on June 10, 2023. However, the adequacy decision only covers data transfers to U.S. companies which are certified under the EU-U.S. Data Privacy Framework.

Environmental Matters

Our operations require the use of hazardous materials (including biological materials), which materials subject us to a variety of federal, state, and local environmental and safety laws and regulations. Some of these laws and regulations provide for strict liability, potentially holding a party liable without regard to fault or negligence. We could be held liable for damages and fines as a result of our, or others’, business operations should contamination of the environment or individual exposure to hazardous materials occur. We cannot predict how new, or changes in, laws or regulations will affect our business, operations, or the cost of compliance.

Employees

As of December 31, 2022,2023, we had 5458 employees, all of whom were full-time employees. None of our employees are represented by a labor union or covered by a collective bargaining agreement with respect to his or her employment with us. We consider our relationship with our employees to be good.

Matters Related to Discontinued Laboratory Operations

Our historical operations included a licensed Clinical License Improvement Amendment ("CLIA") and College of American Pathologists ("CAP") certified laboratory located in Michigan specializing in the molecular testing markets serving women’s health providers in the obstetric, gynecological, fertility, and maternal fetal medicine specialty areas in the United States. Previously, thethis core laboratory business was focused on the prenatal carrier screening and noninvasive prenatal test market, targeting preconception planning and routine pregnancy management for genetic disease risk assessment. Through our prior affiliation with Mattison Pathology, LLP, a Texas limited liability partnership doing business as Avero Diagnostics (“Avero”), located in Lubbock and Dallas, Texas, our operations also included anatomic and molecular pathology testing products in the United States.

In June 2021, we announced a strategic transformation ("Strategic Transformation") that included the closure of our genetics lab in Ann Arbor, Michigan and the sale of our affiliated Avero laboratory business in December 2021, together referred to as the Laboratory Operations. We have excluded from continuing operations forreported all periods presented in this report revenues and expenses associated with itsour Laboratory Operations which are reported as discontinued operations in the consolidated financial statements. See Note 43 to our audited consolidated financial statements for additional information on the Laboratory Operations.

Preeclampsia

We had historically been developing a rule-out test for preeclampsia, branded as the Preecludia™ test, as part of our discontinued Laboratory Operations. In connection with our Strategic Transformation, we deprioritized this project and discontinued further investment in its development. OnIn November 29, 2022, we announced that we had signed an agreement to licenselicensed the Preecludia™ test to Northwest Pathology, doing business as Avero Diagnostics (formerly known as Northwest Pathology) for commercial development in exchange for commercial milestone payments and royalties on net sales.

Single-Molecule Detection

Historically, we also had been developing a novel, single-molecule counting assay, initially for use in noninvasive prenatal testing, but potentially applicable to other known genomic, epigenomic, and proteomic targets, as part of our discontinued Laboratory Operations. In connection with our Strategic Transformation, we deprioritized this project and discontinued further investment in its development. OnIn May 4, 2022, we completed the divesture of the single-molecule detection platform and contributed all assets related to the platform to newly-formednewly formed Enumera Molecular, Inc. ("Enumera"), which intends to develop and commercialize the platform. We received a minority ownership stake in Enumera in exchange for the assets.assets and subsequently, in March 2024 we sold that minority ownership stake.

Reimbursement

Prior to the discontinuation of our Laboratory Operations, we operated clinical laboratories. Laboratory tests are classified for reimbursement purposes under a coding system known as Current Procedure Terminology ("CPT"), which labs and their physician customers must use to bill payors and to receive payment for molecular tests. These CPT codes are associated with the particular

28

molecular test that we have provided to the patient. Once the American Medical Association establishes a CPT code, the Centers for Medicare and Medicaid Services ("CMS") or its contractors may establish payment levels and coverage rules with respect to our molecular tests under Medicare and Medicaid. In addition, commercial third-party payors independently establish reimbursement rates and coverage rules for our molecular tests under their respective plans.

Prior to the discontinuation of our Laboratory Operations, we submitted for reimbursement using CPT codes that we believe are appropriate for our testing, but codes may be rejected or withdrawn and payors may seek refunds of amounts that they claim were inappropriately billed to a specified CPT code.

We received small amounts of revenue in 2022 and 2023 in connection with the reimbursement for tests that were run prior to the closure of our Ann Arbor lab through September 2022. Subsequently, we expect that our primary sources of revenue will shift to potential grants and partnership revenues, though these amounts, if and when received, may be relatively small in magnitude.

Commercial Third-Party Payors

In the past, we submitted claims for reimbursement and received associated payments from commercial third-party payors. Our contracts with commercial third-party payors provide for contracted rates of reimbursement. For instances where we were not contracted with a particular commercial third-party payor, we submitted claims seeking reimbursement on a non-contracted basis.

In cases where we were an in-network provider in a commercial third-party payor health plan, we are subject to the terms of contracts entered into with such payors and we may be subject to discipline, breach of contract actions, non-renewal, or other contractual remedies for noncompliance with the requirements of these contracts (which may include reduced reimbursement rates) and we are also subject to associated state or federal laws.

We have entered into settlement agreements with commercial third-party payors in order to settle claims related to past billing and coding practices that have been discontinued, including, without limitation: United HealthCare Services, Inc. and UnitedHealthcare Insurance Company ("United"), and Aetna Health Management, Inc. ("Aetna"). In September 2019, we entered into a settlement agreement with United that governs past benefit claims and a corrective action plan which governs future benefit claims that we submit for reimbursement at an arm’s length, out-of-network basis to United. As of December 31, 2021 the settlement with these commercial payors has been fully paid. Each of these settlement agreements provides for a release of past claims by the parties.

Discontinued Laboratory Operations Payor Dispute

On November 16, 2020, we received a letter from Anthem, Inc. ("Anthem"), informing us that Anthem iswas seeking recoupment for historical payments made by Anthem in an aggregate amount of approximately $27.4 million. The historical payments for which Anthem was seeking recoupment were claimed to relate primarily to discontinued legacy billing practices for our former non-invasive prenatal tests ("NIPT") and microdeletion tests and secondarily to the implementation of the new CPT code for reimbursement for our former Preparent expanded carrier screening tests.

We have historically negotiated and settled similar claims with third-party payors. Although our practice in resolving disputes with other similar large commercial payors has generally led to agreed settlement amounts substantially less than the originally claimed amount, there can be no assurance that we will be successful in a similar settlement amount in any ongoing or future dispute. Historical settlement amounts and payment time periods may not be indicative of the final settlement terms with Anthem, if any. We disputedisputed this claim of recoupment with Anthem in full, with offsets for amounts owed by Anthem to us. We had previously established an accrual for the estimated probable loss for this matter. During the year ended December 31, 2022, we reversed this

accrual for a portion of the matter, and during the year ended December 31, 2023 for the remainder of the matter, in view of applicable statute of limitations, and have reflected this change in revenues from discontinued operations.

Corporate Information

We were incorporated in Delaware in January 2012 under the name Ascendant MDx, Inc.. In August 2013, we changed our name to Progenity, Inc., and in April 2022, we changed our name to Biora Therapeutics, Inc. Through our predecessor, Ascendant MDx, a California corporation, we commenced our operations in 2010. Our principal executive offices are located at 4330 La Jolla Village Drive, Suite 300, San Diego, CA 92122, and our telephone number is (833) 727-2841. Our website is www.bioratherapeutics.com. Information contained on or accessible through our website is not a part of this Annual Report, and the inclusion of our website address in this Annual Report is an inactive textual reference only.

We file electronically with the Securities and Exchange Commission (the "SEC") our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8‑K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the "Exchange Act"). We make available on our website at

29

www.bioratherapeutics.com, under “Investors,” free of charge, copies of these reports as soon as reasonably practicable after filing or furnishing these reports with the SEC.

Implications of Being an Emerging Growth Company and a Smaller Reporting Company

We are an emerging growth company, as defined in Section 2(a) of the Securities Act of 1933, as amended, or the Securities Act, as modified by the Jumpstart Our Business Startups Act of 2012, or the JOBS Act, and we may take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies, including relief from the auditor attestation requirements of Section 404 of the Sarbanes-Oxley Act of 2002, as amended, less extensive disclosure obligations regarding executive compensation in our registration statements, periodic reports and proxy statements, exemptions from the requirements to hold a nonbinding advisory vote on executive compensation, and exemptions from stockholder approval of any golden parachute payments not previously approved. We may also elect to take advantage of other reduced reporting requirements in future filings. As a result, our stockholders may not have access to certain information that they may deem important and the information that we provide to our stockholders may be different than, and not comparable to, information presented by other public reporting companies. We could remain an emerging growth company until the earlier of (1) the last day of the year following the fifth anniversary of the completion of our initial public offering ("IPO"), (2) the last day of the year in which we have total annual gross revenue of at least $1.235 billion, (3) the last day of the year in which we are deemed to be a “large accelerated filer” as defined in Rule 12b-2 under the Exchange Act, which would occur if the market value of our common stock held by non-affiliates exceeded $700.0 million as of the last business day of the second fiscal quarter of such year or (4) the date on which we have issued more than $1.0 billion in non-convertible debt securities during the prior three-year period.

In addition, the JOBS Act also provides that an emerging growth company may take advantage of the extended transition period provided in the Securities Act for complying with new or revised accounting standards. An emerging growth company may therefore delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. We have elected to avail ourselves of this exemption and, as a result, will not be subject to the same implementation timing for new or revised accounting standards as are required of other public companies that are not emerging growth companies, which may make comparison of our consolidated financial information to those of other public companies more difficult.

We are also a smaller reporting company, as defined in the Exchange Act. We may continue to be a smaller reporting company even after we are no longer an emerging growth company. We may take advantage of certain of the scaled disclosures available to smaller reporting companies and will be able to take advantage of these scaled disclosures for so long as (i) our voting and non-voting common stock held by non-affiliates is less than $250.0 million measured on the last business day of our second fiscal quarter or (ii) our annual revenue is less than $100.0 million during the most recently completed fiscal year and our voting and non-voting common stock held by non-affiliates is less than $700.0 million measured on the last business day of our second fiscal quarter.

Item 1A. Risk Factors.

Investing in our common stock involves a high degree of risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this Annual Report on Form 10-K, including “Management’s Discussion & Analysis” and the financial statements and related notes, before deciding to make an investment decision with respect to shares of our common stock. If any of the following risks actually occurs, our business, financial condition, operating results, reputation, and prospects could be materially and adversely affected. In that event, the price of our common stock could decline and you could lose part or all of your investment. We caution you that the risks, uncertainties and other factors referred to below and elsewhere in this Annual Report on Form 10-K may not contain all of the risks, uncertainties and other factors that may affect our future results and operations. Moreover, new risks will emerge from time to time. It is not possible for our management to predict all risks. In this “Risk Factors” section, unless the context requires otherwise, references to “we,” “us,” “our,” “Biora,” “Biora Therapeutics” or the “company” refer to Biora Therapeutics, Inc. and its subsidiaries.

Risk Factor Summary

Risks Related to Our Business and Industry

We have incurred losses in the past, expect to incur losses in the future, have limited capital resources as disclosed in this Annual Report, and we may not be able to continue operations or achieve or sustain profitability in the future.

We expect to incur significant costs in connection with the development, approval, and commercialization of our products under development. Even if we succeed in creating such product candidates from these investments, those innovations still may fail to result in commercially successful products.

Other than potential revenues from partnerships similar to those we have entered into in the recent past, we do not expect to generate significant revenues in the immediate future. We do not expect to generate sufficient revenue to cover our costs for the foreseeable future, including research and development and clinical study expenses related to furthering our product pipeline.pipeline, and expect to incur losses in the future. We may

31

not generate significant revenue in the future until we are able to achieve commercialization of our product candidates or enter into licensing or collaboration agreements with respect to such product candidates.

Since we or any collaborators or licensees may not successfully develop additional product candidates, obtain required regulatory authorizations, manufacture products at an acceptable cost or with appropriate quality, or successfully market and sell such product candidates with desired margins, our expenses may continue to exceed any revenues we may receive. Our operating expenses also will increase as and if, among other things:

Given our limited capital resources as disclosed elsewhere in the Annual Report, if we are not able to raise additional capital or generate revenue to fund our operations, we may not be able to continue operations or achieve or sustain profitability in the future.

Operating our business will require a significant amount of cash, and our ability to generate sufficient cash depends on many factors, some of which are beyond our control. An adverse judgment and/or significant damage award against us resulting from our pending litigation matters that are currently defending would negatively impact our financial position and our ability to raise additional capital. We expect to need to raise additional capital, and if we cannot raise additional capital when needed, we may have to curtail or cease operations.

We expect to incur significant costs in connection with our operations, including, but not limited to, the research and development, marketing authorization, and/or commercialization of new medical devices, therapeutics, and other products. These development activities generally require a substantial investment before we can determine commercial viability, and the proceeds from our offerings to date will not be sufficient to fully fund these activities. In addition, as a result of the Strategic Transformation, our revenue has been significantly reduced.substantially eliminated. We will need to raise additional funds through public or private equity or debt financings, collaborations, licensing arrangements or sales of assets to continue to fund or expand our operations. Following the Strategic Transformation, we no longer generate revenue from our historical testing business, and we would be dependent on such additional sources of capital, including public or private equity or debt financings, collaborations, licensing arrangements or sales of assets for all of our future capital requirements if we do not achieve commercialization of our product candidates.

Our actual liquidity and capital funding requirements will depend on numerous factors, including:

The availability of additional capital, whether from private capital sources (including banks) or the public capital markets, fluctuates as our financial condition and market conditions in general change. There may be times when the private capital sources and the public capital markets lack sufficient liquidity or when our securities cannot be sold at attractive prices, or at all, in which case we would not be able to access capital from these sources. In addition, a weakening of our financial condition, a further decline in our share price or a deterioration in our credit ratings could adversely affect our ability to obtain necessary funds. Even if available, additional financing could be costly or have adverse consequences.

32

Additional capital, if needed, may not be available on satisfactory terms or at all. Our ability to raise capital in the public capital markets, including through “at the market” offerings pursuant to our At Market Issuance Sales Agreement with B. Riley Securities, Inc., BTIG, LLC, and H.C. Wainwright & Co. LLC (the "ATM Facility"), may be limited by, among other things, SEC rules and regulations impacting the eligibility of smaller companies to use Form S-3 for primary offerings of securities. Although alternative public and private transaction structures may be available, these may require additional time and cost, may impose operational restrictions on us, and may not be available on attractive terms.

Furthermore, any additional capital raised through the sale of equity or equity-linked securities, including through our ATM Facility, (as defined below), will dilute our stockholders’ ownership interests and may have an adverse effect on the price of our common stock. In addition, the terms of any financing may adversely affect stockholders’ holdings or rights. Debt financing, if available, may include restrictive covenants. To the extent that we raise additional funds through collaborations and licensing arrangements, it may be necessary to relinquish some rights to our technologies or grant licenses on terms that may not be favorable to us.

To minimize dilution to our equity holders, we are also exploring non-dilutive financing options, which could include licenses or collaborations and/or sales of certain assets or business lines. To the extent that we raise additional funds through collaborations and licensing arrangements, it may be necessary to relinquish some rights to our technologies or grant licenses on terms that may not be favorable to us. To the extent that we raise additional funds through strategic transactions, including a sale of one of our lines of business, we may not ultimately realize the value of or synergies from such transactions and our long-term prospects could be diminished as a result of the divestiture of these assets. We may also be required to use some or all of these sale proceeds to pay down indebtedness, which would then not serve to increase our working capital.

If we are not able to obtain adequate funding when needed, we may be required to delay development programs or other initiatives. If we are unable to raise additional capital in sufficient amounts or on satisfactory terms, we may have to make reductions in our workforce and may be prevented from continuing our discovery, development, and commercialization efforts and exploiting other corporate opportunities. In addition, it may be necessary to work with a partner on one or more of our product candidates, which could reduce the economic value of those products to us. If we engage in strategic transactions with respect to revenue-producing assets or business lines, our revenue may be adversely affected and such transactions could negatively affect the viability of our business. Each of the foregoing may harm our business, operating results, and financial condition, and may impact our ability to continue as a going concern.

We maintain our cash at financial institutions, often in balances that exceed federally-insuredfederally insured limits. The failure of financial institutions could adversely affect our ability to pay our operational expenses or make other payments.

Our cash held in non-interest-bearing and interest-bearing accounts exceeds the Federal Deposit Insurance Corporation (“FDIC”) insurance limits. If such banking institutions were to fail, we could lose all or a portion of those amounts held in excess of such insurance limitations. For example, the FDIC took control of Silicon Valley Bank on March 10, 2023. The Federal Reserve subsequently announced that account holders would be made whole. However, the FDIC may not make all account holders whole in the event of future bank failures. In addition, even if account holders are ultimately made whole with respect to a future bank failure, account holders’ access to their accounts and assets held in their accounts may be substantially delayed. Any material loss that we may experience in the future or inability for a material time period to access our cash and cash equivalents could have an adverse effect on our ability to pay our operational expenses or make other payments, which could adversely affect our business.

We rely on a limited number of suppliers or, in some cases, single suppliers, and may not be able to find replacements or immediately transition to alternative suppliers on a cost-effective basis, or at all.

We source components of our technology from third parties and certain components are sole sourced. Obtaining substitute components may be difficult or require us to re-design our products under development, including those for which we are required to obtain marketing authorization from the FDA and would need to obtain a new marketing authorization from the FDA to use a new supplier. Any natural or other disasters, acts of war or terrorism, shipping embargoes, labor unrest or political instability or similar events at our third-party manufacturers’ facilities that cause a loss of manufacturing capacity or a reduction in the quality or yield of the items manufactured would heighten the risks that we face. For example, our targeted therapeutics device under development includes complex components including circuit boards that have to be built to exacting standards, and the failure of a manufacturer to meet our requirements on time, as we have experienced in the past and continue to experience, could lead to delays in our plans for testing, pre-clinical and clinical studies and other development activities. Changes to, failure to renew or termination of our existing agreements or our inability to enter into new agreements with other suppliers could result in the loss of access to important components of our products under development and could impair, delay or suspend our commercialization efforts. Our failure to maintain a continued and cost-effective supply of high-quality components could materially and adversely harm our business, operating results, and financial condition.

The manufacturing of our therapeutics product candidates, and other products under development, is highly exacting and complex, and we depend on third parties to supply materials and manufacture certain products and components.

Manufacturing is highly exacting and complex due, in part, to strict regulatory requirements governing the manufacture of our future products and product candidates, including medical devices with complex components, including but not limited to, circuit boards and pharmaceutical products. We have limited personnel with experience in, and we do not own facilities for, manufacturing any products. We depend upon our collaborators and other third parties, including sole source suppliers, to provide raw materials

33

meeting FDA quality standards and related regulatory requirements, manufacture devices, and drug substances, produce drug products and provide certain analytical services with respect to our products and product candidates. The FDA and other regulatory authorities require that many of our products be manufactured according to cGMP regulations and that proper procedures be implemented to assure the quality of our sourcing of raw materials and the manufacture of our products. Any failure by us, our collaborators, or our third-party manufacturers to comply with cGMP and/or scale-up manufacturing processes could lead to a delay in, or failure to obtain, marketing authorizations. In addition, such failure could be the basis for action by the FDA, including issuing a warning letter, initiating a product recall or seizure, fines, imposing operating restrictions, total or partial suspension of production or injunctions and/or withdrawing marketing authorizations for products previously granted to us. To the extent we rely on a third-party manufacturer, the risk of noncompliance with cGMP regulations may be greater and the ability to effect corrective actions for any such noncompliance may be compromised or delayed.

Moreover, we expect that certain of our therapeutics product candidates, including BT-600, BT-001, BT-200, and BT-002, are drug-device combination products that will be regulated under the drug and biological product regulations of the FD&C Act, and Public Health Service Act (the "PHSA"),PHSA, based on their primary modes of action as drugs and biologics. Third-party manufacturers may not be able to comply with cGMP regulations, applicable to drug-device combination products, including applicable provisions of the FDA’s drug and biologics cGMP regulations, device cGMP requirements embodied in the QSR, or similar regulatory requirements outside the United States.

In addition, we or third parties may experience other problems with the manufacturing, quality control, yields, storage or distribution of our products, including equipment breakdown or malfunction, failure to follow specific protocols and procedures, problems with suppliers and the sourcing or delivery of raw materials and other necessary components, problems with software, labor difficulties, and natural disaster-related events or other environmental factors. These problems can lead to increased costs, delays to development and preclinical study timelines, lost collaboration opportunities, damage to collaborator relations, time and expense spent investigating the cause and, depending on the cause, similar losses with respect to other batches of products. For example, our therapeutics devices under development includes complex components including circuit boards that have to be built to exacting standards, and the failure of a manufacturer to meet our requirements on time, as we have experienced in the past and continue to experience, could lead to delays in our plans for testing, pre-clinical and clinical studies and other development activities. If problems are not discovered before the product is released to the market, recalls, corrective actions, or product liability-related costs also may be incurred. Problems with respect to the manufacture, storage, or distribution of products could materially disrupt our business and have a material and adverse effect on our operating results and financial condition.

We may be unable to successfully divest certain assets or recover any of the costs of our investment in certain R&D programs.

In connection with our Strategic Transformation, we have divested certain assets that do not align with our current operational plans and strategies, including the sale of certain laboratory assets and the divesture of Avero. We have explored the potential divestiture and/or out-license of other assets and intellectual property as well. It is possible that we will be unable to successfully divest and/or license these assets, and we may never recover any of the costs of our historical R&D investments.

In May 4, 2022, we completed the divesture of our single-molecule detection platform and contributed all assets related to the single-molecule detection platform to newly-formednewly formed Enumera, which intends to develop and commercialize the platform. We received a minority ownership stake in Enumera in exchange for the assets. It is possible that the value of our equity stake in Enumera will decrease over time, and it is possible that we may never recover any of the costs of the historical R&D investments related to this platform.

Additionally, onin November 29, 2022, we announced that we had signed an agreement to license our Preecludia™ rule-out test for preeclampsia to Northwest Pathology, doing business as Avero Diagnostics (formerly known as Northwest Pathology)(“Northwest”) for commercial development in exchange for commercial milestone payments and royalties on net sales. There is no assurance that AveroNorthwest will be able to successfully commercialize the test. As a result, there is no assurance that we will receive any payments from the transaction and we may never recover any of the costs of the historical R&D investments related to this program.

We operate in a highly competitive business environment.

The industries in which we operate are highly competitive and require an ongoing, extensive search for technological innovation. They also require, among other things, the ability to effectively develop, test, commercialize, market, and promote products, including communicating the effectiveness, safety, and value of products to actual and prospective healthcare providers. Other competitive factors in our industries include quality and price, product technology, reputation, customer service, and access to technical information.

We expect our future products, if approved, to face substantial competition from major pharmaceutical companies, biotechnology companies, academic institutions, government agencies, and public and private research institutions. The larger

34

competitors have substantially greater financial and human resources, as well as a much larger infrastructure than we do. For more information on our therapeutics competitors, see Part I, Item 1. “Business—Competition.”

Additionally, we compete to acquire the intellectual property assets that we require to continue to develop and broaden our product pipeline. In addition to our in-house research and developmentR&D efforts, we may seek to acquire rights to new intellectual property through corporate acquisitions, asset acquisitions, licensing, and joint venture arrangements. Competitors with greater resources may acquire intellectual property that we seek, and even where we are successful, competition may increase the acquisition price of such intellectual property or prevent us from capitalizing on such acquisitions, licensing opportunities, or joint venture arrangements. If we fail to compete successfully, our growth may be limited.

It is possible that developments by our competitors could make our products or technologies under development less competitive or obsolete. Our future growth depends, in part, on our ability to provide products that are more effective than those of our competitors and to keep pace with rapid medical and scientific change. Sales of any future products may decline rapidly if a new product is introduced by a competitor, particularly if a new product represents a substantial improvement over our products. In addition, the high level of competition in our industry could force us to reduce the price at which we sell our products or require us to spend more to market our products.

Many of our competitors have greater resources than we have. This enables them, among other things, to spread their marketing and promotion costs over a broader revenue base. In addition, we may not be able to compete effectively against our competitors because their products and services are superior. Our current and future competitors could have greater experience, technological and financial resources, stronger business relationships, broader product lines and greater name recognition than us, and we may not be able to compete effectively against them. Increased competition is likely to result in pricing pressures, which could harm our revenues, operating income, or market share. If we are unable to compete successfully, we may be unable to increase or sustain our revenues or achieve or sustain profitability.

Our success depends on our ability to develop new product candidates, which is complex and costly and the results are uncertain.

Effective execution of research and developmentR&D activities and the timely introduction of new products and product candidates to the market are important elements of our business strategy. However, the development of new products and product candidates is complex, costly, and uncertain and requires us to, among other factors, accurately anticipate patients’, clinicians’, and payors’ needs, and emerging technology trends. For more information on our current R&D efforts, see Part I, Item 1. “Business.”

In the development of new products and product candidates, we can provide no assurance that:

These and other factors beyond our control could delay our launch of new products and product candidates.

The research and developmentR&D process in our industries generally requires a significant amount of time from the research and design stage through commercialization. The launch of such new products requires the completion of certain clinical development and/or assay validations in a commercial laboratory. This process is conducted in various stages, and each stage presents the risk that we will not achieve our goals and will not be able to complete clinical development for any planned product in a timely manner. Such development and/or validation failures could prevent or significantly delay our ability to obtain FDA clearance or approval as may be necessary or desired or launch any of our planned products and product candidates. At times, it may be necessary for us to abandon a product in which we have invested substantial resources. Without the timely introduction of new product candidates, our future

35

products may become obsolete over time and our competitors may develop products that are more competitive, in which case our business, operating results, and financial condition will be harmed.

We are still developing our therapeutics pipeline and are in the early stages of its development, have conducted some early preclinical studies, and limited early clinical studies, and to date have generated no therapeutics products or product revenue. There can be no assurance that we will develop any therapeutics products that deliver therapeutic solutions, or, if developed, that such product candidates will be authorized for marketing by regulatory authorities, or will be commercially successful. This uncertainty makes it difficult to assess our future prospects and financial results.

Our operations with respect to our therapeutics pipeline to date have been limited to developing our platform technology, undertaking preclinical studies and feasibility studies with human subjects, and conducting research to identify potential product candidates. To date, we have only conducted limited feasibility studies in humans to evaluate whether our platform localization technology enables identification of the location of our ingestible medical devices within the gastrointestinal tract as well as the function of our devices.

We seek to develop a suite oftwo therapeutic platforms that use ingestible capsules for both diagnostic and therapeutic solutions.drug-device combination products. However, medical device and related diagnostic and therapeutic product development is a highly speculative undertaking and involves a substantial degree of uncertainty and we are in the early stages of our development programs. Our therapeutics pipeline has not yet demonstrated an ability to generate revenue or successfully overcome many of the risks and uncertainties frequently encountered by companies in new and rapidly evolving fields such as ours. Consequently, the ability to accurately assess the future operating results or business prospects of our therapeutics pipeline is significantly more limited than if we had an operating history or approved commercial therapeutics products. Our success in developing commercial products that are based on our therapeutics pipeline will depend on a variety of factors, many of which are beyond our control, including, but not limited to:

Even if we are able to develop one or more commercial therapeutics products, we expect that the operating results of these products will fluctuate significantly from period to period due to the factors above and a variety of other factors, many of which are beyond our control, including, but not limited to:

Accordingly, the likelihood of the success of our therapeutics pipeline must be evaluated in light of these many potential challenges and variables.

36

The development of new product candidates will require us to undertake clinical trials, which are costly, time-consuming, and subject to a number of risks.

The development of new product candidates, including development of the data necessary for IND submissions and to obtain clearance or approval for such product candidates, is costly, time-consuming, and carries with it the risk of not yielding the desired results. Once filed, our IND submissions may not become effective if the FDA raises concerns with respect to those submissions. Further, the outcome of preclinical studies and early clinical trials may not be predictive of the success of later clinical trials, and interim results of clinical trials do not necessarily predict success in future clinical trials. Many companies in the pharmaceutical and biotechnology industries have suffered significant setbacks in late-stage clinical trials after achieving positive results in earlier development, and even if we achieve positive results in earlier trials, we could face similar setbacks. The design of a clinical trial can determine whether its results will support a product candidate’s marketing authorization, to the extent required, and flaws in the design of a clinical trial may not become apparent until the clinical trial is well advanced. In addition, preclinical and clinical data are often susceptible to varying interpretations and analyses. Many companies that believed their product candidates performed satisfactorily in preclinical studies and clinical trials have nonetheless failed to obtain marketing authorization for the product candidates. Furthermore, limited results from earlier-stage studies may not predict results from studies in larger numbers of subjects drawn from more diverse populations over a longer period of time.

Unfavorable results from ongoing preclinical studies and clinical trials could result in delays, modifications, or abandonment of ongoing or future analytical or clinical trials, or abandonment of a product development program, or may delay, limit, or prevent marketing authorizations, where required, or commercialization of our product candidates. Even if we, or our collaborators, believe that the results of clinical trials for our product candidates warrant marketing authorization, the FDA and other regulatory authorities may disagree and may not grant marketing authorizations for our product candidates.

Moreover, the FDA requires us to comply with regulatory standards, commonly referred to as the GCP requirements, for conducting, recording, and reporting the results of clinical trials to assure that data and reported results are credible and accurate and that the rights, safety, and welfare of trial participants are protected. Other countries’ regulatory agencies also have requirements for clinical trials with which we must comply. We also are required to register certain ongoing clinical trials and post the results of certain completed clinical trials on a government-sponsored database, ClinicalTrials.gov, within specified timeframes. Failure to do so can result in fines, enforcement action, adverse publicity, and civil and criminal sanctions.

The initiation and completion of any clinical studies may be prevented, delayed, or halted for numerous reasons. We may experience delays in initiation or completion of our clinical trials for a number of reasons, which could adversely affect the costs, timing, or success of our clinical trials, including related to the following:

37

In addition, disruptions caused by the COVID-19 pandemic may increase the likelihood that we encounter such difficulties or delays in initiating, enrolling, conducting, or completing our planned and ongoing clinical trials.

Any of these occurrences may significantly harm our business, financial condition, and prospects. In addition, many of the factors that cause, or lead to, a delay in the commencement or completion of clinical trials may also ultimately lead to the denial of regulatory approval of our product candidates.

Patient enrollment in clinical trials and completion of patient follow-up depend on many factors, including the size of the patient population, the nature of the trial protocol, the proximity of patients to clinical sites, the eligibility criteria for the clinical trial, patient compliance, competing clinical trials and clinicians’ and patients’ perceptions as to the potential advantages of the product being studied in relation to other available therapies, including any new treatments that may be approved for the indications we are investigating. For example, patients may be discouraged from enrolling in our clinical trials if the trial protocol requires them to undergo extensive post-treatment procedures or follow-up to assess the safety and efficacy of a product candidate, or they may be persuaded to participate in contemporaneous clinical trials of a competitor’s product candidate. In addition, patients participating in our clinical trials may drop out before completion of the trial or experience adverse medical events unrelated to our product candidates. Delays in patient enrollment or failure of patients to continue to participate in a clinical trial may delay commencement or completion of the clinical trial, cause an increase in the costs of the clinical trial and delays, or result in the failure of the clinical trial.

Clinical trials must be also conducted in accordance with the laws and regulations of the FDA and other applicable regulatory authorities’ legal requirements, regulations or guidelines, and are subject to oversight by these governmental agencies and IRBs at the medical institutions where the clinical trials are conducted. We rely on CROs and clinical trial sites to ensure the proper and timely conduct of our clinical trials and while we have agreements governing their committed activities, we have limited influence over their actual performance. We depend on our collaborators and on medical institutions and CROs to conduct our clinical trials in compliance with the FDA’s GCP requirements. To the extent our collaborators or the CROs fail to enroll participants for our clinical trials, fail to conduct the study to GCP requirements, or are delayed for a significant time in the execution of trials, including achieving full enrollment, we may be affected by increased costs, program delays, or both. In addition, clinical trials that are conducted in countries outside the United States may subject us to further delays and expenses as a result of increased shipment costs, additional regulatory requirements and the engagement of non-U.S. CROs, as well as expose us to risks associated with clinical investigators who are unknown to the FDA, and different standards of diagnosis, screening and medical care.

The clinical trial process is lengthy and expensive with uncertain outcomes. We have limited data and experience regarding the safety and efficacy of our product candidates. Results of earlier studies may not be predictive of future clinical trial results, or the safety or efficacy profile for such products or product candidates.

Clinical testing is difficult to design and implement, can take many years, can be expensive, and carries uncertain outcomes. The results of preclinical studies and clinical trials of our products conducted to date and ongoing or future studies and trials of our current, planned, or future products and product candidates may not be predictive of the results of later clinical trials, and interim results of a clinical trial do not necessarily predict final results. Our interpretation of data and results from our clinical trials do not ensure that we will achieve similar results in future clinical trials. In addition, preclinical and clinical data are often susceptible to various interpretations and analyses, and many companies that have believed their products performed satisfactorily in preclinical studies and earlier clinical trials have nonetheless failed to replicate results in later clinical trials. Products in later stages of clinical trials may fail to show the desired safety and efficacy despite having progressed through nonclinical studies and earlier clinical trials. Failure can

38

occur at any stage of clinical testing. Our clinical studies may produce negative or inconclusive results, and we may decide, or regulators may require us, to conduct additional clinical and non-clinical testing in addition to those we have planned.

Interim “top-line” and preliminary data from studies or trials that we announce or publish from time to time may change as more data become available and are subject to audit and verification procedures that could result in material changes in the final data.

From time to time, we may publish interim “top-line” or preliminary data from preclinical studies or clinical trials. Interim data are subject to the risk that one or more of the outcomes may materially change as more data become available. We also make assumptions, estimations, calculations, and conclusions as part of our analyses of data, and we may not have received or had the opportunity to fully and carefully evaluate all data. As a result, the top-line results that we report may differ from future results of the same studies, or different conclusions or considerations may qualify such results, once additional data have been received and fully evaluated. Preliminary or “top-line” data also remain subject to audit and verification procedures that may result in the final data being materially different from the preliminary data we previously published. As a result, interim and preliminary data should be viewed with caution until the final data are available. Additionally, interim data from clinical trials that we may complete are subject to the risk that one or more of the clinical outcomes may materially change as patient enrollment continues and more patient data become available. Adverse differences between preliminary or interim data and final data could seriously harm our business.

Further, others, including regulatory agencies, may not accept or agree with our assumptions, estimates, calculations, conclusions or analyses or may interpret or weigh the importance of data differently, which could impact the value of the particular program, the approvability or commercialization of the particular product candidate or product, and our results of operations, liquidity and financial condition. In addition, the information we choose to publicly disclose regarding a particular study or clinical trial is based on what is typically extensive information, and others may not agree with what we determine is the material or otherwise appropriate information to include in our disclosure. Any information we determine not to disclose may ultimately be deemed significant by others with respect to future decisions, conclusions, views, activities or otherwise regarding a particular product candidate or our business. If the top-line data that we report differ from final results, or if others, including regulatory authorities, disagree with the conclusions reached, our ability to obtain marketing authorization for, and commercialize, product candidates may be harmed, which could seriously harm our business.

The results of our clinical trials may not support the use of our product candidates, or may not be replicated in later studies required for marketing authorizations.

As the healthcare reimbursement system in the United States evolves to place greater emphasis on comparative effectiveness and outcomes data, we cannot predict whether we will have sufficient data, or whether the data we have will be presented to the satisfaction of any payors seeking such data for determining coverage for our products under development, particularly in new areas such as in drug-device combination or therapeutic applications.

The administration of clinical and economic utility studies is expensive and demands significant attention from certain members of our management team. Data collected from these studies may not be positive or consistent with our existing data, or may not be statistically significant or compelling to the medical community or payors. If the results obtained from our ongoing or future studies are inconsistent with certain results obtained from our previous studies, adoption of our products would suffer and our business would be harmed.

Peer-reviewed publications regarding our product candidates may be limited by many factors, including delays in the completion of, poor design of, or lack of compelling data from clinical studies, as well as delays in the review, acceptance, and publication process. If our products under development or the underlying technology do not receive sufficient favorable exposure in peer-reviewed publications, or are not published, the rate of healthcare provider adoption of our products under development and positive reimbursement coverage decisions for our products under development could be negatively affected. The publication of

clinical data in peer-reviewed journals can be a crucial step in commercializing and obtaining reimbursement for products under development, and our inability to control when, if ever, results are published may delay or limit our ability to derive sufficient revenues from any test or other product that is the subject of a study. The performance achieved in published studies might not be repeated in later studies that may be required to obtain FDA clearance or marketing authorizations should we decide for business reasons, or be required to submit applications to the FDA or other health authorities seeking such authorizations.

Our outstanding debt, and any new debt, may impair our financial and operating flexibility.

As of December 31, 2022,2023, we had a face value of approximately $127.8$51.1 million of Convertible Notes outstanding (the "Convertible Notes").convertible notes outstanding. Certain of our debt agreements contain various restrictive covenants.

39

The indenture, dated as of December 7, 2020, by and between the Company and The Bank of New York Mellon Trust Company, N.A., as trustee (the "Indenture"),indentures for our Convertible Notes does not prohibit us orand our subsidiaries from incurring additional indebtedness in the future, with certain exceptions. Under the Convertible Notes, we will not, and we will not permit any subsidiary of ours to, create, incur, assume or permit to exist any lien on any property or asset now owned or later acquired by us or any subsidiary that secures any indebtedness for borrowed money, other than (i) secured indebtedness for borrowed money in existence on the date of the Indenture; (ii) permitted refinancing indebtedness incurred in exchange for, or the net proceeds of which are used to renew, refund, refinance, replace, defease or discharge any secured indebtedness for borrowed money permitted by clause (i) of this sentence; and (iii) additional securedsubordinated indebtedness for borrowed money that, in an aggregate principal amount (or accredited value, as applicable), does not exceed $15.0$10.0 million at any time outstanding.

Accordingly, we may incur a significant amount of additional indebtedness in the future. Our current indebtedness and the incurrence of additional indebtedness could have significant negative consequences for our stockholders and our business, results of operations and financial condition by, among other things:

Our ability to make principal and interest payments will depend on our ability to generate cash in the future. Our business may not generate sufficient funds, and we may otherwise be unable to maintain sufficient cash reserves, to pay amounts due under our indebtedness, and our cash needs may increase in the future. If we do not generate sufficient cash to meet our debt service requirements and other operating requirements, we may need to seek additional financing. In that case, it may be more difficult, or we may be unable, to obtain financing on terms that are acceptable to us or at all.

In addition, any future indebtedness that we may incur may contain financial and other restrictive covenants that limit our ability to operate our business, raise capital or make payments under our other indebtedness. If we fail to comply with these covenants or to make payments under our indebtedness when due, then we would be in default under that indebtedness, which could, in turn, result in that and our other indebtedness becoming immediately payable in full.

Actual or perceived failures to comply with applicable data protection, privacy, consumer protection and security laws, regulations, standards and other requirements could adversely affect our business, results of operations, and financial condition.

The global data protection landscape is rapidly evolving, and we are or may become subject to numerous state, federal, and foreign laws, requirements, and regulations governing the collection, use, disclosure, retention, and security of personal information. Implementation standards and enforcement practices are likely to remain uncertain for the foreseeable future, and we cannot yet determine the impact future laws, regulations, standards, or perception of their requirements may have on our business. This evolution may create uncertainty in our business, affect our ability to operate in certain jurisdictions or to collect, store, transfer, use and share personal information, necessitate the acceptance of more onerous obligations in our contracts, result in liability or impose additional

costs on us. The cost of compliance with these laws, regulations, and standards is high and is likely to increase in the future. Any failure or perceived failure by us to comply with federal, state or foreign laws or regulations, our internal policies and procedures or our contracts governing our processing of personal information could result in negative publicity, government investigations and enforcement actions, claims by third parties and damage to our reputation, any of which could have a material adverse effect on our operations, financial performance and business.

As our operations and business grow, we may become subject to or affected by new or additional data protection laws and regulations and face increased scrutiny or attention from regulatory authorities. In the United States, the manner in which we collect,

40

use, access, disclose, transmit and store PHI, is subject to HIPAA, as amended by HITECH, and the health data privacy, security and breach notification regulations issued pursuant to these statutes.

HIPAA establishes a set of national privacy and security standards for the protection of PHI, by health plans, healthcare clearinghouses, and certain healthcare providers, referred to as covered entities, and the business associates with whom such covered entities contract for services that involve the use or disclosure of PHI. HIPAA requires healthcare providers like us to develop and maintain policies and procedures with respect to PHI that is used or disclosed, including the adoption of administrative, physical, and technical safeguards to protect such information.

HIPAA further requires covered entities to notify affected individuals “without unreasonable delay and in no case later than 60 calendar days after discovery of the breach” if their unsecured PHI is subject to unauthorized access, use or disclosure. If a breach affects 500 patients or more, covered entities must report it to HHS and local media without unreasonable delay (and in no case later than 60 days after discovery of the breach), and HHS will post the name of the entity on its public website. If a breach affects fewer than 500 individuals, the covered entity must log it and notify HHS at least annually. HIPAA also implemented the use of standard transaction code sets and standard identifiers that covered entities must use when submitting or receiving certain electronic healthcare transactions, including activities associated with the billing and collection of healthcare claims.

Penalties for failure to comply with a requirement of HIPAA and HITECH vary significantly depending on the failure and could include requiring corrective actions, and/or imposing civil monetary or criminal penalties. HIPAA also authorizes state attorneys general to file suit under HIPAA on behalf of state residents. Courts can award damages, costs and attorneys’ fees related to violations of HIPAA in such cases. While HIPAA does not create a private right of action allowing individuals to sue us in civil court for HIPAA violations, its standards have been used as the basis for a duty of care claim in state civil suits such as those for negligence or recklessness in the misuse or breach of PHI.

Certain states have also adopted comparable privacy and security laws and regulations, some of which, such as California's Confidentiality of Medical Information Act, may be more stringent than HIPAA. Such laws and regulations will be subject to interpretation by various courts and other governmental authorities, thus creating potentially complex compliance issues for us and our future customers and strategic partners.

In addition, depending on June 28, 2018, California enactedthe information at issue, comprehensive state privacy laws may apply as well, such as the CCPA, which went into effect on January 1, 2020 and was amended by the CPRA, which went into effect on January 1, 2023. The CPRA creates individual privacy rights for California consumers and increases the privacy and security obligations of entities handling certain personal data. The CPRA provides for civil penalties for violations, as well as a private right of action for data breaches that could increase data breach litigation. The CPRA may increase our compliance costs and potential liability, and many similar laws have been proposed at the federal level and proposed or enacted in other states. Any liability from failure to comply with the requirements of these laws could adversely affect our financial condition. Various state data breach laws may require additional notification requirements in the event of a breach, as well, depending on the types of information accessed without authorization.

Although we work to comply with applicable laws, regulations and standards, our contractual obligations and other legal obligations, these requirements are evolving and may be modified, interpreted and applied in an inconsistent manner from one jurisdiction to another, and may conflict with one another or other legal obligations with which we must comply. Any failure or perceived failure by us or our employees, representatives, contractors, consultants, CROs, collaborators, or other third parties to comply with such requirements or adequately address privacy and security concerns, even if unfounded, could result in additional cost and liability to us, damage our reputation, and adversely affect our business and results of operations.

Security breaches, loss of data, and other disruptions could compromise sensitive information related to our business or prevent us from accessing critical information and expose us to liability, which could adversely affect our business and reputation.

In the ordinary course of our business, including our now discontinued historical testing business, we collect and store sensitive data, including PHI (such as patient medical records, including test results), and personally identifiable information. We also store

business and financial information, intellectual property, research and developmentR&D information, trade secrets and other proprietary and business critical information, including that of our customers, payors, and collaboration partners. We manage and maintain our data utilizing a combination of on-site systems, managed data center systems and cloud-based data center systems. We are highly dependent on information technology networks and systems, including the internet, to securely process, transmit, and store critical information. Although we take measures to protect sensitive information from unauthorized access or disclosure, our information technology and infrastructure, and that of our third-party billing and collections provider and other service providers, may be vulnerable to attacks by hackers, viruses, disruptions and breaches due to employee error or malfeasance.

41

A security breach or privacy violation that leads to unauthorized access, disclosure or modification of, or prevents access to, patientpersonal information, including PHI, could compel us to comply with state and federal breach notification laws, subject us to mandatory corrective action and require us to verify the correctness of database contents. Such a breach or violation also could result in legal claims or proceedings brought by a private party or a governmental authority, liability under laws and regulations that protect the privacy of personal information, such as HIPAA, HITECH, and laws and regulations of various U.S. states and foreign countries, as well as penalties imposed by the Payment Card Industry Security Standards Council for violations of the Payment Card Industry Data Security Standard. If we are unable to prevent such security breaches or privacy violations or implement satisfactory remedial measures, we may suffer loss of reputation, financial loss and civil or criminal fines or other penalties because of lost or misappropriated information. In addition, these breaches and other forms of inappropriate access can be difficult to detect, and any delay in identifying them may lead to increased harm of the type described above.

Unauthorized access, loss or dissemination of information could disrupt our operations, including our ability to process claims and appeals, provide customer assistance services, conduct research and developmentR&D activities, develop and commercialize tests,products, collect, process and prepare company financial information, provide information about tests, educate patients and healthcare providers about our service,products, and manage the administrative aspects of our business, any of which could damage our reputation and adversely affect our business. Any breach could also result in the compromise of our trade secrets and other proprietary information, which could adversely affect our competitive position.

In addition, health-related, privacy, and data protection laws and regulations in the United States and elsewhere are subject to interpretation and enforcement by various governmental authorities and courts, resulting in complex compliance issues and the potential for varying or even conflicting interpretations, particularly as laws and regulations in this area are in flux. It is possible that these laws may be interpreted and applied in a manner that is inconsistent with our practices. If so, this could result in government-imposed fines or orders requiring that we change our practices, which could adversely affect our business and our reputation. Complying with these laws could cause us to incur substantial costs or require us to change our business practices and compliance procedures in a manner adverse to our business, operating results, and financial condition.

Any failure or perceived failure by us or any third-party collaborators, service providers, contractors or consultants to comply with our privacy, confidentiality, data security or similar obligations, or any data security incidents or other security breaches that result in the accidental, unlawful or unauthorized access to, use of, release of, processing of, or transfer of sensitive information, including personally identifiablepersonal information, may result in negative publicity, harm to our reputation, governmental investigations, enforcement actions, regulatory fines, litigation or public statements against us, could cause third parties to lose trust in us or could result in claims by third parties, including those that assert that we have breached our privacy, confidentiality, data security or similar obligations, any of which could have a material adverse effect on our reputation, business, financial condition or results of operations. We could be subject to fines and penalties (including civil and criminal) under HIPAA for any failure by us or our business associates to comply with HIPAA’s requirements. Moreover, data security incidents and other security breaches can be difficult to detect, and any delay in identifying them may lead to increased harm. While we have implemented data security measures intended to protect our information, data, information technology systems, applications and infrastructure, there can be no assurance that such measures will successfully prevent service interruptions or data security incidents.

If we lose the services of members of our senior management team or other key employees, we may not be able to execute our business strategy.

Our success depends in large part upon the continued service of our senior management team and certain other key employees who are important to our vision, strategic direction, and culture. Our current long-term business strategy was developed in large part by our senior management team and depends in part on their skills and knowledge to implement. We may not be able to offset the impact on our business of the loss of the services of any member of our senior management or other key officers or employees or attract additional talent. The loss of any members of our senior management team or other key employees could have a material and adverse effect on our business, operating results, and financial condition.

An inability to attract and retain highly skilled employees could adversely affect our business.

To execute our business plan, we must attract and retain highly qualified personnel. Competition for qualified personnel is intense, especially for personnel in our industry and especially in the areas where our facilities are located. We have from time to time

experienced, and we expect to continue to experience, difficulty in hiring and retaining employees with appropriate qualifications. Many of the companies with which we compete for experienced personnel have greater resources than we have. If we hire employees from competitors or other companies, their former employers may attempt to assert that these employees have breached their legal obligations to their former employees, resulting in a diversion of our time and resources. In addition, job candidates and existing employees often consider the value of the stock awards they receive in connection with their employment. If the perceived value of our stock awards declines, it may adversely affect our ability to attract and retain highly skilled employees. If we fail to attract new

42

personnel or fail to retain and motivate our current personnel, our business, operating results, and financial condition could be adversely affected.

We may not be able to obtain and maintain the third-party relationships that are necessary to develop, fund, commercialize, and manufacture some or all of our product candidates.

We expect to depend on collaborators, partners, licensees, manufacturers, and other third parties to support our product candidate development efforts, including, to manufacture our product candidates and to market, sell, and distribute any products we successfully develop. Any problems we experience with any of these third parties could delay the development, commercialization, and manufacturing of our product candidates, which could harm our results of operations.

We cannot guarantee that we will be able to successfully negotiate agreements for, or maintain relationships with, collaborators, partners, licensees, manufacturers, and other third parties on favorable terms, if at all. If we are unable to obtain or maintain these agreements, we may not be able to clinically develop, manufacture, obtain regulatory authorizations for, or commercialize any future product candidates, which will in turn adversely affect our business.

We expect to expend substantial management time and effort to enter into relationships with third parties and, if we successfully enter into such relationships, to manage these relationships. In addition, substantial amounts will be paid to third parties in these relationships. However, we cannot control the amount or timing of resources our future contract partners will devote to our research and developmentR&D programs and products under development, and we cannot guarantee that these parties will fulfill their obligations to us under these arrangements in a timely fashion, if at all. In addition, while we manage the relationships with third parties, we cannot control all of the operations of and protection of intellectual property bywith respect to such third parties.

We rely on third parties for matters related to the design of our product candidates and for our preclinical research and clinical trials, and those third parties may not perform satisfactorily, including failing to meet deadlines for the completion of such preclinical research and trials.

We rely and expect to continue to rely on third parties, such as engineering firms, CROs, clinical data management organizations, medical institutions, and clinical investigators, to conduct and manage certain aspects of the design, preclinical testing, and clinical trials for our products under development. Our reliance on these third parties for research and developmentR&D activities reduces our control over these activities but does not relieve us of our responsibilities. For example, we remain responsible for ensuring that each of our clinical trials is conducted in accordance with GCP requirements, the general investigational plan, and the protocols established for such trials.

These third parties may be slow to recruit patients and complete the studies. Furthermore, these third parties may also have relationships with other entities, some of which may be our competitors. If these third parties do not successfully carry out their contractual duties, do not meet expected deadlines, experience work stoppages, terminate their agreements with us or need to be replaced, or do not conduct our clinical trials in accordance with regulatory requirements or our stated protocols, we may need to enter into new arrangements with alternative third parties, which could be difficult, costly or impossible, and our clinical trials may be extended, delayed, or terminated or may need to be repeated. If any of the foregoing occur, we may not be able to obtain, or may be delayed in obtaining, marketing authorizations for our product candidates and may not be able to, or may be delayed in our efforts to, successfully commercialize our product candidates.

Even if our newly developed product candidates receive marketing authorizations, to the extent required, they may fail to achieve market acceptance.

If we can develop enhanced, improved, or new product candidates that receive marketing authorizations, they may nonetheless fail to gain sufficient market acceptance by healthcare providers, patients, third-party payors, and others in the medical community to be commercially successful. The degree of market acceptance of any of our new product candidates following receipt of marketing authorizations, if any, will depend on a number of factors, including:

43

If our newly developed product candidates are unable to achieve market acceptance, our business, operating results, and financial condition will be harmed.

Additional time may be required to obtain marketing authorizations for certain of our therapeutics product candidates because they are combination products.

Some of our therapeutics product candidates are drug-device combination products that require coordination within the FDA and similar foreign regulatory agencies for review of their device and drug components. Although the FDA and similar foreign regulatory agencies have systems in place for the review and approval of combination products such as ours, we may experience delays in the development and commercialization of our product candidates due to regulatory timing constraints and uncertainties in the product development and approval process.

Our therapeutics product candidates under development include complex medical devices that, if authorized for marketing, will require training for qualified personnel and care for data analysis.

Our therapeutics product candidates under the early stages of development include complex medical devices that, if authorized for marketing, will require training for qualified personnel, including physicians, and care for data analysis. Although we will be required to ensure that our therapeutics product candidates are prescribed only by trained professionals, the potential for misuse of our therapeutics product candidates, if authorized for marketing, still exists due to their complexity. Such misuse could result in adverse medical consequences for patients that could damage our reputation, subject us to costly product liability litigation, and otherwise have a material and adverse effect on our business, operating results, and financial condition.

The successful discovery, development, manufacturing, and sale of biologics is a long, expensive, and uncertain process and carries unique risks and uncertainties. Moreover, even if successful, our biologic products may be subject to competition from biosimilars.

We may develop product candidates regulated as biologics in the future in connection with our therapeutics pipeline. The successful development, manufacturing, and sale of biologics is a long, expensive, and uncertain process. There are unique risks and uncertainties with biologics. For example, access to and supply of necessary biological materials, such as cell lines, may be limited and governmental regulations restrict access to and regulate the transport and use of such materials. In addition, the testing, development, approval, manufacturing, distribution, and sale of biologics is subject to applicable provisions of the FD&C Act, PHSA, and regulations issued thereunder that are often more complex and extensive than the regulations applicable to other pharmaceutical products or to medical devices. Manufacturing biologics, especially in large quantities, is often complicated and may require the use of innovative technologies. Such manufacturing also requires facilities specifically designed and validated for this purpose and sophisticated quality assurance and quality control procedures. Biologics are also frequently costly to manufacture because production inputs are derived from living animal or plant material, and some biologics cannot be made synthetically.

44

Failure to successfully discover, develop, manufacture, and sell biologics could adversely impact our business, operating results, and financial condition.

Even if we are able to successfully develop biologics in the future, the BPCIA, created a framework for the approval of biosimilars in the United States that could allow competitors to reference data from any future biologic products for which we receive marketing approvals and otherwise increase the risk that any product candidates for which we intend to seek approval as biologic products may face competition sooner than anticipated. Under the BPCIA, an application for a biosimilar product may not be submitted to the FDA until four years following the date that the original biologic was first licensed by the FDA. In addition, the approval of a biosimilar product may not be made effective by the FDA until 12 years from the date on which the reference product was first licensed. During this 12-year period of exclusivity, another company may still market a competing version of the reference product if the FDA approves a full BLA, for the competing product containing the sponsor’s own preclinical data and data from adequate and well-controlled clinical trials to demonstrate the safety, purity, and potency of their product. The BPCIA is complex and is still being interpreted and implemented by the FDA. As a result, the law’s ultimate impact, implementation, and meaning are subject to uncertainty. While it is uncertain when such processes intended to implement the BPCIA may be fully adopted by the FDA, any such processes could have a material adverse effect on the future commercial prospects for our biological product candidates.

In addition, there is a risk that any of our product candidates regulated as a biologic and licensed under a BLA would not qualify for the 12-year period of exclusivity or that this exclusivity could be shortened due to congressional action or otherwise, potentially creating the opportunity for generic competition sooner than anticipated. Other aspects of the BPCIA, some of which may impact the BPCIA exclusivity provisions, have been the subject of litigation. Moreover, the extent to which a biosimilar, once approved, will be substituted for any one of our reference products in a way that is similar to traditional generic substitution for non-biological products is not yet clear, and will depend on a number of marketplace and regulatory factors that are still developing.

In Europe, the European Commission has granted marketing authorizations for several biosimilars pursuant to a set of general and product class-specific guidelines for biosimilar approvals issued over the past few years. In addition, companies are developing biosimilars in other countries that could compete with any biologic products that we develop. If competitors are able to obtain marketing approval for biosimilars referencing any biologic products that we develop, our product candidates may become subject to competition from such biosimilars, with the attendant competitive pressure and consequences. Expiration or successful challenge of our applicable patent rights could also trigger competition from other products, assuming any relevant exclusivity period has expired. As a result, we could face more litigation and administrative proceedings with respect to the validity and/or scope of patents relating to our biologic products.

If our future pharmaceutical product candidates are not approved by regulatory authorities, including the FDA, we will be unable to commercialize them.

In the future, we may develop pharmaceutical product candidates using our therapeutics pipeline that require FDA approval of an NDA or a BLA before marketing or sale in the United States. In the NDA or BLA process, we, or our collaborative partners, must provide the FDA and similar foreign regulatory authorities with data from preclinical and clinical studies that demonstrate that our product candidates are safe and effective, or in the case of biologics, safe, pure, and potent, for a defined indication before they can be approved for commercial distribution. The FDA or foreign regulatory authorities may disagree with our clinical trial designs and our interpretation of data from preclinical studies and clinical trials. The processes by which regulatory approvals are obtained from the FDA and foreign regulatory authorities to market and sell a new product are complex, require a number of years, depend upon the type, complexity, and novelty of the product candidate, and involve the expenditure of substantial resources for research, development, and testing. The FDA and foreign regulatory authorities have substantial discretion in the drug approval process and may require us to conduct additional nonclinical and clinical testing or to perform post-marketing studies. Further, the implementation

of new laws and regulations, and revisions to FDA clinical trial design guidance, may lead to increased uncertainty regarding the approvability of new drugs.

Applications for our drug or biologic product candidates could fail to receive regulatory approval for many reasons, including, but not limited to, the following:

This lengthy approval process, as well as the unpredictability of the results of clinical trials, may result in our failing to obtain regulatory approval to market any of our product candidates, which would seriously harm our business. In addition, the FDA may recommend advisory committee meetings for certain new molecular entities, and if warranted, require a REMS to assure that a drug’s benefits outweigh its risks. Even if we receive regulatory approval of a product, the approval may limit the indicated uses for which the drug may be marketed or impose significant restrictions or limitations on the use and/or distribution of such product.

In addition, in order to market any pharmaceutical or biological product candidates that we develop in foreign jurisdictions, we, or our collaborative partners, must obtain separate regulatory approvals in each country. The approval procedure varies among countries and can involve additional testing, and the time required to obtain approval may differ from that required to obtain FDA approval. Approval by the FDA does not ensure approval by regulatory authorities in other countries, and approval by one foreign regulatory authority does not ensure approval by regulatory authorities in other foreign countries or by the FDA. Conversely, failure to obtain approval in one or more jurisdictions may make approval in other jurisdictions more difficult. These laws, regulations, additional requirements and changes in interpretation could cause non-approval or further delays in the FDA’s or other regulatory authorities’ review and approval of our and our collaborative partner’s product candidates, which would materially harm our business and financial condition and could cause the price of our securities to fall.

The marketing authorization process is expensive, time-consuming, and uncertain, and we may not be able to obtain or maintain authorizations for the commercialization of some or all of our product candidates.

The product candidates associated with our therapeutics pipeline and the activities associated with their development and commercialization, including their design, testing, manufacture, safety, efficacy, recordkeeping, labeling, storage, approval, advertising, promotion, sale, and distribution, export, and import, are subject to comprehensive regulation by the FDA and other regulatory agencies in the United States and by the European Medicines Agency and comparable regulatory authorities in other countries. We have not received authorization to market any of our product candidates from regulatory authorities in any jurisdiction. Failure to obtain marketing authorization for a product candidate will prevent us from commercializing the product candidate.

Securing marketing authorizations may require the submission of extensive preclinical and clinical data and other supporting information to the various regulatory authorities for each therapeutic indication to establish the product candidate’s safety and efficacy, or in the case of product candidates regulated as biologics, such product candidate’s safety, purity, and potency. Securing regulatory authorization generally requires the submission of information about the product manufacturing process to, and inspection of manufacturing facilities by, the relevant regulatory authority. Our product candidates may not be effective, may be only moderately

effective, or may prove to have undesirable or unintended side effects, toxicities or other characteristics that may preclude our obtaining marketing authorization or prevent or limit commercial use.

The process of obtaining marketing authorizations, both in the United States and abroad, is expensive, may take many years if additional clinical trials are required, if authorization is obtained at all, and can vary substantially based upon a variety of factors, including the type, complexity, and novelty of the product candidates involved. Changes in marketing authorization policies during the development period, changes in or the enactment of additional statutes or regulations, or changes in regulatory review for each submitted product application, may cause delays in the approval or rejection of an application. The FDA and comparable authorities in other countries have substantial discretion in the approval process and may refuse to accept any application we submit, or may decide that our data is insufficient for approval and require additional preclinical, clinical, or other studies. In addition, varying interpretations of the data obtained from preclinical and clinical testing could delay, limit, or prevent marketing authorization of a product candidate. Any marketing authorization we or our collaborators ultimately obtain may be limited or subject to restrictions or post-approval commitments that render the approved medicineproduct not commercially viable.

Accordingly, if we or our collaborators experience delays in obtaining authorization or if we or they fail to obtain authorization of our product candidates, the commercial prospects for our product candidates may be harmed and our ability to generate revenue will be materially impaired.

Disruptions at the FDA, the SEC and other government agencies caused by funding shortages or global health concerns could hinder their ability to hire and retain key leadership and other personnel, prevent new products and services from being developed or commercialized in a timely manner or otherwise prevent those agencies from performing normal business functions on which the operation of our business may rely, which could negatively impact our business.

The ability of the FDA to review regulatory filings and our ability to commence human clinical trials can be affected by a variety of factors, including government budget and funding levels, ability to hire and retain key personnel and accept the payment of user fees, and statutory, regulatory and policy changes. Average review times at the agency have fluctuated in recent years as a result. In addition, government funding of the SEC, and other government agencies on which our operations may rely, including those that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable.

Disruptions at the FDA and other agencies may also slow the time necessary for the review and approval of INDs, which would adversely affect our business. For example, in recent years, the U.S. government shut down several times and certain regulatory agencies, such as the FDA and the SEC, had to furlough critical employees and stop critical activities. If a prolonged government shutdown occurs, it could significantly impact the ability of the FDA to timely review and process our regulatory submissions, which could have a material adverse effect on our business. Further, future government shutdowns could impact our ability to access the public markets and obtain necessary capital in order to properly capitalize and continue our operations.

If a prolonged government shutdown occurs, or if global health concerns prevent the FDA or other regulatory authorities from conducting their regular inspections, reviews, or other regulatory activities, it could significantly impact the ability of the FDA or other regulatory authorities to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

Our product candidates may cause undesirable side effects or have other properties that could delay or prevent their regulatory authorization, limit the commercial profile of an approved label or result in significant negative consequences following marketing approval, if granted.

The use of our product candidates could be associated with side effects or adverse events, which can vary in severity (from minor reactions to death) and frequency (infrequent or prevalent). Side effects or adverse events associated with the use of our product candidates may be observed at any time, including in clinical trials or when a product is commercialized. Undesirable side effects caused by our product candidates could cause us or regulatory authorities to interrupt, delay or halt clinical trials and could result in a more restrictive label or the delay or denial of regulatory authorization by the FDA or other comparable foreign authorities. Results of our trials could reveal a high and unacceptable severity and prevalence of side effects such as toxicity or other safety issues and could require us or our collaboration partners to perform additional studies or halt development or sale of these product candidates or expose us to product liability lawsuits, which would harm our business and financial results. In such an event, we may be required by regulatory agencies to conduct additional animal or human studies regarding the safety and efficacy of our product candidates, which we have not planned or anticipated or our studies could be suspended or terminated, and the FDA or comparable foreign regulatory authorities could order us to cease further development of or deny or withdraw approval of our product candidates for any or all targeted indications. There can be no assurance that we will resolve any issues related to any product-related adverse events to the satisfaction of the FDA or any other regulatory agency in a timely manner, if ever, which could harm our business, operating results, financial condition and prospects.

Additionally, product quality characteristics have been shown to be sensitive to changes in process conditions, manufacturing techniques, equipment or sites and other such related considerations, hence any manufacturing process changes we implement prior to or after regulatory authorization could impact product safety and efficacy.

Product-related side effects could affect patient recruitment for clinical trials, the ability of enrolled patients to complete our studies or result in potential product liability claims. We currently carry product liability insurance and we are required to maintain product liability insurance pursuant to certain of our license agreements. We believe our product liability insurance coverage is sufficient in light of our current clinical programs; however, we may not be able to maintain insurance coverage at a reasonable cost or in sufficient amounts to protect us against losses due to liability, or such insurance coverage may not be sufficient to cover all losses. A successful product liability claim or series of claims brought against us could adversely affect our business, operating results, and financial condition. In addition, regardless of merit or eventual outcome, product liability claims may result in impairment of our business reputation, withdrawal of clinical study participants, costs due to related litigation, distraction of management’s attention from our primary business, initiation of investigations by regulators, substantial monetary awards to patients or other claimants, the inability to commercialize our product candidates and decreased demand for our product candidates, if authorized for commercial sale. Additionally, if one or more of our product candidates receives marketing authorization, and we or others later identify undesirable

47

side effects caused by such products, a number of potentially significant negative consequences could result, including, but not limited to:

Any of these events could prevent us from achieving or maintaining market acceptance of a particular product candidate, if approved, and could significantly harm our business, operating results, financial condition, and prospects.

If we receive marketing authorization, regulatory agencies including the FDA and foreign authorities enforce requirements that we report certain information about adverse medical events. For example, under FDA medical device reporting regulations, medical device manufacturers are required to report to the FDA information that a device has or may have caused or contributed to a death or serious injury or has malfunctioned in a way that would likely cause or contribute to a death or serious injury if the malfunction of our device (or any similar future product) were to recur. We may fail to appreciate that we have become aware of a reportable adverse event, especially if it is not reported to us as an adverse event or if it is an adverse event that is unexpected or removed in time from the use of our products. If we fail to investigate and report these events to the FDA within the required timeframes, or at all, the FDA could take enforcement action against us. Any such adverse event involving our products also could result in future corrective actions, such as recalls or customer notifications, or agency action, such as inspection or enforcement action. Any corrective action, whether voluntary or involuntary, including any legal action taken against us, will require us to devote significant time and capital to the matter, distract management from operating our business, and may harm our reputation and financial results.

We may not comply with laws regulating the protection of the environment and health and human safety.

Our research and development involves, or may in the future involve, the use of hazardous materials and chemicals and certain radioactive materials and related equipment. If an accident occurs, we could be held liable for resulting damages, which could be substantial. We are also subject to numerous environmental, health and workplace safety laws and regulations, including those governing laboratory procedures, exposure to blood-borne pathogens and the handling of biohazardous materials. Insurance may not provide adequate coverage against potential liabilities, and we do not maintain insurance for environmental liability or toxic tort claims that may be asserted against us. Additional federal, state, and local laws and regulations affecting our operations may be

adopted in the future. We may incur substantial costs to comply with, and substantial fines or penalties if we violate, any of these laws or regulations.

Unfavorable global economic conditions, whether brought about by global crises, health epidemics, military conflicts and war, geopolitical and trade disputes or other factors, may have a material adverse effect on our business and financial results.

Our business is sensitive to global economic conditions, which can be adversely affected by public health crises (including the COVID-19 pandemic) and epidemics, political and military conflicts, trade and other international disputes, significant natural disasters (including as a result of climate change) or other events that disrupt macroeconomic conditions. Adverse macroeconomic conditions, including inflation, slower growth or recession, new or increased tariffs and other barriers to trade, changes to fiscal and monetary policy or government budget dynamics (particularly in the pharmaceutical and biotech areas), tighter credit, higher interest rates, volatility in financial markets, high unemployment, labor availability constraints, currency fluctuations and other challenges in the global economy have in the past adversely affected, and may in the future adversely affect, us and our business partners and suppliers.

48

For example, military conflicts or wars (such as the ongoing conflictconflicts between Russia and Ukraine)Ukraine and among Israel and surrounding areas) can cause exacerbated volatility and disruptions to various aspects of the global economy. The uncertain nature, magnitude, and duration of hostilities stemming from such conflicts, including the potential effects of sanctions and counter-sanctions, or retaliatory cyber-attacks on the world economy and markets, have contributed to increased market volatility and uncertainty, which could have an adverse impact on macroeconomic factors that affect our business and operations, such as worldwide supply chain issues. It is not possible to predict the short and long-term implications of military conflicts or wars or geopolitical tensions which could include further sanctions, uncertainty about economic and political stability, increases in inflation rate and energy prices, cyber-attacks, supply chain challenges and adverse effects on currency exchange rates and financial markets.

Additionally, our operations and facilities, as well as operations of our service providers and manufacturers, may be located in areas that are prone to earthquakes and other natural disasters. Such operations and facilities are also subject to the risk of interruption by fire, drought, power shortages, nuclear power plant accidents and other industrial accidents, terrorist attacks and other hostile acts, ransomware and other cybersecurity attacks, telecommunication failure, labor disputes, public health crises (including the COVID-19 pandemic) and other events beyond our control. Global climate change is resulting in certain types of natural disasters occurring more frequently or with more intense effects. If a natural disaster or other event occurred that prevented us from using all or a significant portion of our headquarters, that damaged critical infrastructure, such as the manufacturing facilities of our third-party contract manufacturers, or that otherwise disrupted operations, it may be difficult or, in certain cases, impossible for us to continue our business for a substantial period of time. Because we rely on a single or limited sources for the supply and manufacture of many critical components, a business interruption affecting such sources would exacerbate any negative consequences on our business. We may not carry sufficient business interruption insurance to compensate us for all losses that may occur.

Any public health crises, including the COVID-19 pandemic, may affect our operations and those of third parties on which we rely, including our business partners and suppliers. To date, we are aware of certain suppliers for our R&D activities who have experienced operational delays directly related to the COVID-19 pandemic. In the past three years, the COVID-19 pandemic has caused, and likely will continue to cause, significant volatility and uncertainty in U.S. and international markets, disruptions to our business and delays in our preclinical studies, clinical trials and timelines, including as a result of impacts associated with protective health measures that we, other businesses and governments are taking or might have to take again in the future to manage the pandemic. The extent to which the COVID-19 pandemic and measures taken in response thereto impact our business, results of operations and financial condition will depend on future developments which are highly uncertain and difficult to predict.

Our operating results may fluctuate significantly, which could adversely impact the value of our common stock.

Our operating results, including our revenues, gross margin, profitability, and cash flows, have varied in the past and may vary significantly in the future, and period-to-period comparisons of our operating results may not be meaningful. Accordingly, our results should not be relied upon as an indication of future performance. Our operating results, including quarterly financial results, may fluctuate as a result of a variety of factors, many of which are outside of our control. Fluctuations in our results may adversely impact the value of our common stock. Factors that may cause fluctuations in our financial results include, without limitation, those listed elsewhere in this “Risk Factors” section. In addition, as we increase our research and development efforts, we expect to incur costs in advance of achieving the anticipated benefits of such efforts.

We may engage in acquisitions that could disrupt our business, cause dilution to our stockholders, or reduce our financial resources.

We have in the past entered into, and may in the future enter into, transactions to acquire other businesses, products, or technologies. Successful acquisitions require us to correctly identify appropriate acquisition candidates and to integrate acquired products or operations and personnel with our own.

Should we make an error in judgment when identifying an acquisition candidate, should the acquired operations not perform as anticipated, or should we fail to successfully integrate acquired technologies, operations, or personnel, we will likely fail to realize the

49

benefits we intended to derive from the acquisition and may suffer other adverse consequences. Acquisitions involve a number of other risks, including:

We cannot predict the number, timing or size of future acquisitions or the effect that any such transactions might have on our business, operating results, and financial condition.

The development and expansion of our business through joint ventures, licensing and other strategic transactions may result in similar risks that reduce the benefits we anticipate from these strategic alliances and cause us to suffer other adverse consequences.

We may be significantly impacted by changes in tax laws and regulations or their interpretation.

U.S. and foreign governments continue to review, reform and modify tax laws. Changes in tax laws and regulations could result in material changes to the domestic and foreign taxes that we are required to provide for and pay. In addition, we are subject to regular audits with respect to our various tax returns and processes in the jurisdictions in which we operate. Errors or omissions in tax returns, process failures, or differences in interpretation of tax laws by tax authorities and us may lead to litigation, payments of additional taxes, penalties, and interest. On December 22, 2017, the Tax Cuts and Jobs Act of 2017 ("TCJA"), was passed into law. The TCJA has given rise to significant one-time and ongoing changes, including, but not limited to, a federal corporate tax rate decrease to 21% for tax years beginning after December 31, 2017, limitations on interest expense deductions, the immediate expensing of certain capital expenditures, the adoption of elements of a partially territorial tax system, new anti-base erosion provisions, a reduction to the maximum deduction allowed for net operating losses generated in tax years after December 31, 2017 and providing for indefinite carryforwards for losses generated in tax years after December 31, 2017. The legislation is unclear in many respects and could be subject to potential amendments and technical corrections, and will be subject to interpretations and implementing regulations by the Treasury and Internal Revenue Service, any of which could mitigate or increase certain adverse effects of the legislation. In addition, it is unclear how these U.S. federal income tax changes will affect state and local taxation. Generally, future changes in applicable tax laws and regulations, or their interpretation and application, could have a material and adverse effect on our business, operating results, and financial condition.

Our ability to utilize our net operating loss carryforwards and certain other tax attributes may be limited.

As of December 31, 2022,2023, we had net operating loss ("NOL") carryforwards of approximately $504.8$500.3 million for federal income tax purposes, and $246.3$218.6 million for state income tax purposes. The federal NOLs will be carried forward indefinitely and the state NOLs begin expiring in 2028. Utilization of these NOLs depends on many factors, including our future income, which cannot be assured. Some of these NOLs could expire unused and be unavailable to offset our future income tax liabilities. In addition, under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended (the "Code"), and corresponding provisions of state law, if a

corporation undergoes an “ownership change,” which is generally defined as a greater than 50 percentage point change, by value, in its equity ownership by 5% stockholders over a rolling three-year period, the corporation’s ability to use its pre-change NOLs and other pre-change tax attributes to offset its post-change income may be limited. If we determine that an ownership change has occurred and our ability to use our historical NOLs is materially limited, it could harm our future operating results by effectively increasing our future tax obligations. In addition, under the TCJA, federal NOLs incurred in 2018 and in future years may be carried forward indefinitely but generally may not be carried back and the deductibility of such NOLs is limited to 80% of taxable income.

50

Reimbursement Risks Related to Our Historical Testing Business

Billing disputes with third-party payors may decrease realized revenue and may lead to requests for recoupment of past amounts paid.

Prior to the shutdown of our Laboratory Operations, which occurred in 2021, we operated clinical laboratories and billed for tests. Payors dispute our billing or coding from time to time and we deal with requests for recoupment from third-party payors from time to time in the ordinary course of our business (see Note 109 to our consolidated financial statements included elsewhere in this Annual Report for additional information regarding current recoupment requests). We continue to receive recoupment requests and we expect these disputes and requests for recoupment may continue for a period of time in the future. Third-party payors may decide to deny payment or recoup payment for testing that they contend to have been not medically necessary, against their coverage determinations, or for which they have otherwise overpaid, and we may be required to refund reimbursements already received. We have entered into settlement agreements with government and commercial payors in order to settle claims related to past billing practices that have since been discontinued. For more information on these disputes, see Part I, Item 1. “Business—Reimbursement—Commercial Third-Party Payors.” Additionally, the ACA, enacted in March 2010, requires providers and suppliers to report and return any overpayments received from government payors under the Medicare and Medicaid programs within 60 days of identification. Failure to identify and return such overpayments exposes the provider or supplier to liability under federal false claims laws and the healthcare enforcement authorities of Office of Inspector General of the Department of Health and Human Services ("OIG"). Claims for recoupment also require the time and attention of our management and other key personnel, which can be a distraction from operating our business.

If a third-party payor successfully challenges that payment to us for prior testing was in breach of contract or otherwise contrary to policy or law, they may recoup payment, which amounts could be significant and would impact our operating results and financial condition. We may also decide to negotiate and settle with a third-party payor in order to resolve an allegation of overpayment. In the past, we have negotiated and settled these types of claims with third-party payors. We may be required to resolve further disputes in the future. For example, after the Company is currently in the processclosure of reviewingour Laboratory Operations, we received several managed Medicaid payor recoupment requests aggregating to $1.1 million.million, which we dispute. We can provide no assurance that we will not receive similar claims for recoupment from other third-party payors in the future. For more information on this claim, see Part I, Item 1. “Business—Reimbursement—Payor Dispute.” Any of these outcomes, including recoupment or reimbursements, might also require us to restate our financials from a prior period, any of which could have a material and adverse effect on our business, operating results, and financial condition.

If the validity of an informed consent from a patient is challenged, we could be forced to refund amounts previously paid by third-party payors, or to exclude a patient’s data from clinical trial results.

We are required to ensure that all clinical data and blood samplesand/or patient specimens that we receive have been collected from subjects who have provided appropriate informed consent for us to perform testing in clinical trials. We seek to ensure that the subjects from whom the data and samples are collected do not retain or have conferred on them any proprietary or commercial rights to the data or any discoveries derived from them. A subject’s informed consent could be challenged in the future, and the informed consent could prove invalid, unlawful, or otherwise inadequate for our purposes. Any such findings against us, or our partners, could deny us access to, or force us to stop, testing samples in a particular area or could call into question the results of our clinical trials. In addition, we could be requested to refund amounts previously paid by third-party payors for tests where an informed consent is challenged. We could become involved in legal challenges, which could require significant management and financial resources and adversely affect our operating results.

We may be unable to obtain or maintain third-party payor coverage and reimbursement for our future tests or products.

Our future success will depend on our or our potential partners' ability to obtain or maintain adequate reimbursement coverage from third-party payors. Third-party reimbursement for our testing historically represented a significant portion of our revenues, and we expect third-party payors such as third-party commercial payors and government healthcare programs to be a source of revenue in the future. It is to be determined whether and to what extent certain of our products under development will be covered or reimbursed. If we or our potential partners are unable to obtain or maintain coverage or adequate reimbursement from, or achieve in-network status with, third-party payors for our future tests or other products, our ability to generate revenues will be limited. For example, healthcare providers

may be reluctant to orderprescribe our tests or other products due to the potential of a substantial cost to the patient if coverage or reimbursement is unavailable or insufficient.

51

Regulatory and Legal Risks Related to Our Business

If we or our commercial partners act in a manner that violates healthcare laws or otherwise engage in misconduct, we could face substantial penalties and damage to our reputation, and our business operations and financial condition could be adversely affected.

We are subject to healthcare fraud and abuse regulation and enforcement by both the U.S. federal government and the states in which we conduct our business, including:

52

Furthermore, a development affecting our industry is the increased enforcement of the federal False Claims Act and, in particular, actions brought pursuant to the False Claims Act’s “whistleblower” or “qui tam” provisions. The False Claims Act imposes liability for, among other things, knowingly presenting, or causing to be presented, a false or fraudulent claim for payment by a federal governmental payor program. The qui tam provisions of the False Claims Act allow a private individual to bring civil actions on behalf of the federal government for violations of the False Claims Act and permit such individuals to share in any amounts paid by the defendant to the government in fines or settlement.

When an entity is determined to have violated the False Claims Act, it is subject to mandatory damages of three times the actual damages sustained by the government, plus significant mandatory civil penalties for each false claim. In addition, various states have enacted false claim laws analogous to the federal False Claims Act, and in some cases apply more broadly because many of these state laws apply to claims made to private payors and not merely governmental payors.

The rapid growth and expansion of our business may increase the potential for violating these laws or our internal policies and procedures designed to comply with these laws. The evolving interpretations of these laws and regulations by courts and regulators increase the risk that we may be alleged to be, or in fact found to be, in violation of these or other laws and regulations, including pursuant to private qui tam actions brought by individual whistleblowers in the name of the government as described above.

Our inability to obtain, on a timely basis or at all, any necessary marketing authorizations for new device products or improvements could adversely affect our future product commercialization and operating results.

Our product candidates are expected to be subject to regulation by the FDA, and numerous other federal and state governmental authorities. The process of obtaining regulatory approvals or clearances to market a medical device, particularly from the FDA and regulatory authorities outside the United States, can be costly and time-consuming, and approvals or clearances might not be granted for future products on a timely basis, if at all. To ensure ongoing customer safety, regulatory agencies such as the FDA may re-evaluate their current approval or clearance processes and may impose additional requirements. In addition, the FDA and other regulatory authorities may impose increased or enhanced regulatory inspections for domestic or foreign facilities involved in the manufacture of medical devices.

We may develop new medical devices in connection with our therapeutics pipeline and new molecular test candidates that are regulated by the FDA as medical devices. Unless otherwise exempted, medical devices must receive one of the following marketing authorizations from the FDA before being marketed in the United States: “510(k) clearance,” de novo classification, or PMA. The FDA determines whether a medical device will require 510(k) clearance, de novo classification, or the PMA process based on statutory criteria that include the

risk associated with the device and whether the device is similar to an existing, legally marketed product. In the 510(k) clearance process, before a device may be marketed, the FDA must determine that a proposed device is “substantially equivalent” to a legally-marketedlegally marketed “predicate” device, which includes a device that has been previously cleared through the 510(k) process, a device that was legally marketed prior to May 28, 1976 (pre-amendments device), a device that was originally on

53

the U.S. market pursuant to an approved PMA and later down-classified, or a 510(k)-exempt device. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. Clinical data are sometimes required to support substantial equivalence. In the process of obtaining PMA approval, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to, technical, preclinical, clinical trial, manufacturing, and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices. The process to obtain either 510(k) clearance or PMA will likely be costly, time-consuming, and uncertain. However, we believe the PMA process is generally more challenging. Even if we design a product that we expect to be eligible for the 510(k) clearance process, the FDA may require that the product undergo the PMA process. There can be no assurance that the FDA will approve or clear the marketing of any new medical device product that we develop. Even if regulatory approval or clearance is granted, such approval may include significant limitations on indicated uses, which could materially and adversely affect the prospects of the new medical device product.

If a medical device is novel and has not been previously classified by the FDA as Class I, II, or III, it is automatically classified into Class III regardless of the level of risk it poses. The Food and Drug Administration Modernization Act of 1997 established a route to market for low to moderate risk medical devices that are automatically placed into Class III due to the absence of a predicate device, called the “Request for Evaluation of Automatic Class III Designation,” or the de novo classification procedure. This procedure allows a manufacturer whose novel device would automatically be classified into Class III to request down-classification of its medical device into Class I or Class II on the basis that the device presents low or moderate risk, rather than requiring the submission and approval of a PMA application.

FDA marketing authorization could not only be required for new products we develop, but also could be required for certain enhancements we may seek to make to our future products. Delays in receipt of, or failure to obtain, marketing authorizations could materially delay or prevent us from commercializing our products or result in substantial additional costs that could decrease our profitability. In addition, even if we receive FDA or other regulatory marketing authorizations for a new or enhanced product, the FDA or such other regulator may condition, withdraw, or materially modify its marketing authorization.

We are subject to costly and complex laws and governmental regulations.

Our therapeutics product candidates are subject to a complex set of regulations and rigorous enforcement, including by the FDA, DOJ, HHS, and numerous other federal, state, and non-U.S. governmental authorities. To varying degrees, each of these agencies requires us to comply with laws and regulations governing the development, testing, manufacturing, labeling, marketing, and distribution of our product candidates, if approved. As a part of the regulatory process of obtaining marketing authorization for new products and modifications to products, we may conduct and participate in numerous clinical trials with a variety of study designs, patient populations, and trial endpoints. Unfavorable or inconsistent clinical data from existing or future clinical trials or the market’s or FDA’s perception of this clinical data, may adversely impact our ability to obtain product approvals, our position in, and share of, the markets in which we participate, and our business, operating results, and financial condition. We cannot guarantee that we will be able to obtain or maintain marketing authorization for our product candidates and/or enhancements or modifications to products, and the failure to maintain or obtain marketing authorization in the future could have a material and adverse effect on our business, operating results, financial condition.

Both before and after a product is commercially released, we and our products are subject to ongoing and pervasive oversight of government regulators. For instance, in the case of any product candidates subject to regulation by the FDA, including those products candidates in connection with our therapeutics pipeline, our facilities and procedures and those of our suppliers will be subject to periodic inspections by the FDA to determine compliance with applicable regulations. The results of these inspections can include inspectional observations on FDA’s Form-483, warning letters, or other forms of enforcement. If the FDA or a non-U.S. regulatory agency were to conclude that we are not in compliance with applicable laws or regulations, or that any of our product candidates, if authorized for marketing, are ineffective or pose an unreasonable health risk, the FDA or such other non-U.S. regulatory agency could ban products, withdraw marketing authorizations for such products, detain or seize adulterated or misbranded products, order a recall, repair, replacement, or refund of such products, refuse to grant pending marketing applications, require certificates of non-U.S. governments for exports, and/or require us to notify health professionals and others that the products present unreasonable risks of substantial harm to the public health. The FDA and other non-U.S. regulatory agencies may also assess civil or criminal penalties against us, our officers, or employees and impose operating restrictions on a company-wide basis. The FDA may also recommend prosecution to the DOJ. Any adverse regulatory action, depending on its magnitude, may restrict us from effectively marketing and selling our products and limit our ability to obtain future marketing authorizations, and could result in a substantial modification to our

business practices and operations. Furthermore, we occasionally receive investigative demands, subpoenas, or other requests for information from state and federal governmental agencies, and we cannot predict the timing, outcome, or impact of any such investigations. See Part I, Item 3. “Legal Proceedings.”Note 9 to our consolidated financial statements included elsewhere in this Annual Report. Any adverse outcome in one or more of these investigations could include the commencement of civil and/or criminal proceedings, substantial fines, penalties, and/or administrative remedies, including exclusion

54

from government reimbursement programs and/or amendments to our corporate integrity agreement with the OIG. In addition, resolution of any of these matters could involve the imposition of additional, costly compliance obligations. These potential consequences, as well as any adverse outcome from government investigations, could have a material and adverse effect on our business, operating results, and financial condition.

Current and future legislation may increase the difficulty and cost for us, and any collaborators, to obtain marketing approval of and commercialize our drug candidates and affect the prices we, or they, may obtain.

To date, there have been several recent U.S. congressional inquiries and proposed and enacted state and federal legislation and regulation designed to, among other things, bring more transparency to drug pricing, review the relationship between pricing and manufacturer patient support programs, reduce the costs of drugs under Medicare and reform government program reimbursement methodologies for drug products. Heightened governmental scrutiny over the manner in which manufacturers set prices for their marketed products has resulted in several recent Congressional inquiries and proposed and enacted federal and state legislation designed to, among other things, bring more transparency to product pricing, review the relationship between pricing and manufacturer patient programs, and reform government program reimbursement methodologies for products. We expect that additional state and federal healthcare reform measures will be adopted in the future, particularly in light of the new presidential administration, any of which could limit the amounts that federal and state governments will pay for healthcare therapies, which could result in reduced demand for our product candidates or additional pricing pressures. Most recently,For example, on August 16, 2022, President Biden signed into law the Inflation Reduction Act of 2022 (“IRA”), which contains provisions intended to lower beneficiary drug spending. Beginning in 2023, the IRA authorizes the CMS to negotiate Medicare reimbursement rates for certain prescription drug products, which may put limits on prices paid for drugs by government health programs. We cannot be sure whether additional legislation or rulemaking related to the IRA will be issued or enacted, or what impact, if any, such changes will have on the profitability of any of our drug candidates, if approved for commercial use, in the future.

We and our commercial partners and contract manufacturers are subject to significant regulation with respect to manufacturing medical devices and therapeutic products. The manufacturing facilities on which we rely may not continue to meet regulatory requirements or may not be able to meet supply demands.

Entities involved in the preparation of medical devices and/or therapeutic products for clinical studies or commercial sale, including our manufacturers for the therapeutic products that we may develop, are subject to extensive regulation. Components of a finished medical device or therapeutic product approved for commercial sale or used in late-stage clinical studies must be manufactured in accordance with cGMP and/or QSR requirements. These regulations govern manufacturing processes and procedures (including record keeping) and the implementation and operation of quality systems to control and assure the quality of investigational products and products approved for sale. Poor control of production processes can lead to the introduction of contaminants or to inadvertent changes in the properties or stability of our product candidates that may not be detectable in final product testing. We, our collaboration partners or our contract manufacturers must supply all necessary documentation in support of an NDA, a BLA, a PMA, a 510(k) application, a request for de novo classification, or a Marketing Authorization Application ("MAA"), on a timely basis and must adhere to cGMP regulations enforced by the FDA and other regulatory agencies through their facilities inspection program. Some of our contract manufacturers may have never produced a commercially approved pharmaceutical product and therefore have not been subject to the review of the FDA and other regulators. The facilities and quality systems of some or all of our collaboration partners and third-party contractors must pass a pre-approval inspection for compliance with the applicable regulations as a condition of regulatory approval of our drug and biologic product candidates and may be subject to inspection in connection with a MAA for any of our other potential product candidates. In addition, the regulatory authorities may, at any time, audit or inspect a manufacturing facility involved with the preparation of our product candidates or our other potential products or the associated quality systems for compliance with the regulations applicable to the activities being conducted. Although we oversee our contract manufacturers, we cannot control the manufacturing process of, and are completely dependent on, such contract manufacturing partners for compliance with these regulatory requirements. If these facilities do not pass a pre-approval plant inspection, marketing authorizations for the products may not be granted or may be substantially delayed until any violations are corrected to the satisfaction of the regulatory authority, if ever.

The regulatory authorities also may, at any time following approval or clearance of a product for sale, audit the manufacturing facilities of our collaboration partners and third-party contractors. If any such inspection or audit identifies a failure to comply with applicable regulations or if a violation of our product specifications or applicable regulations occurs independent of such an inspection or audit, we or the relevant regulatory authority may require remedial measures that may be costly and/or time-consuming for us or a third party to implement and that may include the temporary or permanent suspension of a clinical study or commercial sales or the temporary or permanent closure of a facility.

Any such remedial measures imposed upon us or third parties with whom we contract could materially harm our business.

If we, our collaboration partners or any of our third-party manufacturers fail to maintain regulatory compliance, the FDA or other applicable regulatory authority can impose regulatory sanctions including, among other things, refusal to approve a pending

55

application for a new product candidate, withdrawal of a marketing authorization or suspension of production. As a result, our business, operating results, and financial condition may be materially harmed.

Additionally, if supply from one approved manufacturer is interrupted, an alternative manufacturer will need to be qualified and we may need to obtain marketing authorization for a change in the manufacturer through submission of a PMA supplement, 510(k) pre-market notification, NDA or BLA supplement, MAA variation or other regulatory filing to the FDA or other foreign regulatory agencies, which could result in further delay.

These factors could cause us to incur additional costs and could cause the delay or termination of clinical studies, regulatory submissions, required marketing authorizations or commercialization of our products under development. Furthermore, if our suppliers fail to meet contractual requirements and we are unable to secure one or more replacement suppliers capable of production at a substantially equivalent cost, our clinical studies may be delayed or we could lose potential revenue.

If the FDA does not conclude that certain of our product candidates satisfy the requirements for the Section 505(b)(2) regulatory approval pathway, or if the requirements for such product candidates under Section 505(b)(2) are not as we expect, the approval pathway for those product candidates will likely take significantly longer, cost significantly more and entail significantly greater complications and risks than anticipated, and in either case may not be successful.

We are developing proprietary product candidates, such as BT-600, a GI-targeted tofacitinib, for which we may seek FDA approval through the Section 505(b)(2) regulatory pathway. We expect that BT-600 will be regulated as a drug-device combination product under the drug provisions of the FD&C Act, enabling us to submit NDAs for approval of this product candidate. The Hatch-Waxman Act added Section 505(b)(2) to the FD&C Act. Section 505(b)(2) permits the filing of an NDA where at least some of the information required for approval comes from studies that were not conducted by or for the applicant and for which the applicant has not obtained a right of reference. Section 505(b)(2), if applicable to us under the FD&C Act, would allow an NDA we submit to the FDA to rely in part on data in the public domain or the FDA’s prior conclusions regarding the safety and effectiveness of approved compounds, which could expedite the development program for our product candidate by potentially decreasing the amount of nonclinical and/or clinical data that we would need to generate in order to obtain FDA approval. If the FDA does not allow us to pursue the Section 505(b)(2) regulatory pathway as anticipated, we may need to conduct additional nonclinical studies and/or clinical trials, provide additional data and information, and meet additional standards for regulatory approval. If this were to occur, the time and financial resources required to obtain FDA approval for this product candidate, and complications and risks associated with this product candidate, would likely substantially increase. Moreover, inability to pursue the Section 505(b)(2) regulatory pathway could result in new competitive products reaching the market more quickly than our product candidate, which would likely materially adversely impact our competitive position and prospects. Even if we are allowed to pursue the Section 505(b)(2) regulatory pathway, we cannot assure you that our product candidate will receive the requisite approval for commercialization.

In addition, notwithstanding the approval of a number of products by the FDA under Section 505(b)(2) over the last few years, certain pharmaceutical companies and others have objected to the FDA’s interpretation of Section 505(b)(2). If the FDA’s interpretation of Section 505(b)(2) is successfully challenged, the FDA may change its 505(b)(2) policies and practices, which could delay or even prevent the FDA from approving any NDA that we submit under Section 505(b)(2). In addition, the pharmaceutical industry is highly competitive, and Section 505(b)(2) NDAs are subject to certain requirements designed to protect the patent rights of sponsors of previously approved drugs that are referenced in a Section 505(b)(2) NDA. These requirements may give rise to patent litigation and mandatory delays in approval of our NDAs for up to 30 months or longer depending on the outcome of any litigation. It is not uncommon for a manufacturer of an approved product to file a citizen petition with the FDA seeking to delay approval of, or impose additional approval requirements for, pending competing products. If successful, such petitions can significantly delay, or even prevent, the approval of the new product. Even if the FDA ultimately denies such a petition, the FDA may substantially delay approval while it considers and responds to the petition. In addition, even if we are able to utilize the Section 505(b)(2) regulatory pathway, there is no guarantee this would ultimately lead to streamlined product development or earlier approval.

Moreover, even if our product candidate is approved under Section 505(b)(2), the approval may be subject to limitations on the indicated uses for which the product may be marketed or to other conditions of approval, or may contain requirements for costly post-marketing testing and surveillance to monitor the safety or efficacy of the product.

The misuse or off-label use of our product candidates may harm our reputation in the marketplace, result in injuries that lead to product liability suits or result in costly investigations, fines or sanctions by regulatory bodies if we are deemed to have engaged in the promotion of these uses, and any of these consequences could be costly to our business.

We are developing certain therapeutics product candidates, including pharmaceutical products and medical devices, which if authorized for marketing by the FDA or other regulatory authorities, will be authorized for use in specific indications and patient

populations. We expect to train our marketing personnel and direct sales force not to promote our product candidates for uses outside

56

of the FDA-approved or -cleared indications for use, which are sometimes referred to as “off-label uses.” We cannot, however, prevent a physician from using our products off-label, when in the physician’s independent professional medical judgment he or she deems it appropriate. There may be increased risk of injury to patients if physicians attempt to use our products off-label. Furthermore, the use of our products for indications other than those authorized for marketing by the FDA or any foreign regulatory body may not effectively treat such conditions, which could harm our reputation in the marketplace among physicians and patients.

If the FDA or any foreign regulatory body determines that our promotional materials or training constitute promotion of an off-label use, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance or imposition of an untitled letter, a warning letter, injunction, seizure, civil fine, or criminal penalties. It is also possible that other federal, state or foreign enforcement authorities might take action under other regulatory authority, such as false claims laws, if they consider our business activities to constitute promotion of an off-label use, which could result in significant penalties, including, but not limited to, criminal, civil, and administrative penalties, damages, fines, disgorgement, exclusion from participation in government healthcare programs and the curtailment of our operations.

In addition, physicians may misuse our products or use improper techniques if they are not adequately trained, potentially leading to injury and an increased risk of product liability. If our products are misused or used with improper technique, we may become subject to costly litigation by our customers or their patients. As described above, product liability claims could divert management’s attention from our core business, be expensive to defend and result in sizeable damage awards against us that may not be covered by insurance.

Our internal information technology systems, or those of any of our third party service providers, or potential future collaborators, may fail or suffer security or data privacy breaches or other unauthorized or improper access to, use of, or destruction of our proprietary or confidential data, employee data or personal data, which could result in additional costs, loss of revenue, significant liabilities, harm to our brand and material disruption of our operations.

In the ordinary course of our business, we and the third parties upon which we rely collect, receive, store, process, generate, use, transfer, disclose, make accessible, protect, secure, dispose of, transmit, and share (collectively, process) proprietary, confidential, and sensitive data, including personal data, intellectual property, trade secrets, and other sensitive data (collectively, sensitive information). We may implement a variety of security measures designed to protect systems that store our information, given their size and complexity and the increasing amounts of information maintained on our internal information technology systems and those of our third-party service providers and supply chain companies, and consultants, these systems are potentially vulnerable to breakdown or other damage or interruption from service interruptions, system malfunction, natural disasters, terrorism, war and telecommunication and electrical failures, as well as security breaches from inadvertent or intentional actions by our employees, contractors, consultants, business partners and/or other third parties, or from cyber-attacks by malicious third parties, which may compromise our system infrastructure or lead to the loss, destruction, alteration or dissemination of, or damage to, our data.

Some actors now engage and are expected to continue to engage in cyber-attacks, including without limitation nation-state actors for geopolitical reasons and in conjunction with military conflicts and defense activities. During times of war and other major conflicts, we, and the third parties upon which we rely, may be vulnerable to a heightened risk of these attacks, including retaliatory cyber-attacks, that could materially disrupt our systems and operations, supply chain, and ability to produce, sell and distribute our goods and services. In particular, severe ransomware attacks are becoming increasingly prevalent and can lead to significant interruptions in our operations, ability to provide our products or services, loss of sensitive data and income, reputational harm, and diversion of funds. Extortion payments may alleviate the negative impact of a ransomware attack, but we may be unwilling or unable to make such payments due to, for example, applicable laws or regulations prohibiting such payments.

To the extent that any disruption or security breach were to result in loss, destruction, unavailability, alteration or dissemination of, or damage to, our data or applications, or for it to be believed or reported that any of these occurred, we could incur liability and reputational damage and the development and commercialization of our programs could be delayed. Further, our insurance policies may not be adequate to compensate us for the potential losses arising from any such disruption in, or failure or security breach of, our systems or third-party systems where information important to our business operations or commercial development is stored.

While we have implemented security measures designed to protect against security incidents, there can be no assurance that these measures will be effective. We may be unable in the future to detect vulnerabilities in our information technology systems because such threats and techniques change frequently, are often sophisticated in nature, and may not be detected until after a security incident has occurred. Further, we may experience delays in developing and deploying remedial measures designed to address any such identified vulnerabilities. Applicable data privacy and security obligations may require us to notify relevant stakeholders of security incidents. Such disclosures are costly, and the disclosure or the failure to comply with such requirements could lead to adverse consequences.

We rely on third-party service providers and technologies to operate critical business systems to process sensitive information in a variety of contexts. Our ability to monitor these third parties’ information security practices is limited, and these third parties may not have adequate information security measures in place. If our third-party service providers experience a security incident or other interruption, we could experience adverse consequences. While we may be entitled to damages if our third-party service providers fail to satisfy their privacy or security-related obligations to us, any award may be insufficient to cover our damages, or we may be unable to recover such award. In addition, supply-chain attacks have increased in frequency and severity, and we cannot guarantee that third parties’ infrastructure in our supply chain or our third-party partners’ supply chains have not been compromised.

If we (or a third party upon whom we rely) experience a security incident or are perceived to have experienced a security incident, we may experience adverse consequences, such as government enforcement actions (for example, investigations, fines, penalties, audits, and inspections); additional reporting requirements and/or oversight; restrictions on processing sensitive information (including personal data); litigation (including class claims); indemnification obligations; negative publicity; reputational harm; monetary fund diversions; interruptions in our operations (including availability of data); financial loss; and other similar harms. Security incidents and attendant consequences may cause stakeholders (including investors and potential customers) to stop supporting our platform, deter new customers from products, and negatively impact our ability to grow and operate our business.

Our contracts may not contain limitations of liability, and even where they do, there can be no assurance that limitations of liability in our contracts are sufficient to protect us from liabilities, damages, or claims related to our data privacy and security obligations. We cannot be sure that our insurance coverage will be adequate or sufficient to protect us from or to mitigate liabilities arising out of our privacy and security practices, that such coverage will continue to be available on commercially reasonable terms or at all, or that such coverage will pay future claims.

Risks Related to Our Intellectual Property

Third-partyNew third-party claims of intellectual property infringement could result in litigation or other proceedings, which would be costly and time-consuming, and could limit our ability to commercialize our products under development.

Our success depends in part on our freedom-to-operate with respect to the patents or intellectual property rights of third parties. We operate in industries in which there have been substantial litigation and other proceedings regarding patents and other intellectual property rights. For example, we have identified a number of third-party patents that may be asserted against us with respect to certain of our future products, and have identified pending patent applications for which the ultimate claim scope and validity are uncertain. We believe that we do not infringe the relevant claims of these third-party patents and/or that the relevant claims of these patents are likely invalid or unenforceable. We may choose to challenge the validity of these patents, though the outcome of any challenge that we may initiate in the future is uncertain. We may also decide in the future to seek a license to those third-party patents, but we might not be able to do so on reasonable terms. Certain third parties, including our competitors or collaborators, have asserted and may in the future assert that we are employing their proprietary technology without authorization or that we are otherwise infringing their intellectual property rights. The risk of intellectual property proceedings may increase as the number of products and the level of competition in our industry segments grows. Defending against infringement claims is costly and may divert the attention of our management and technical personnel. If we are unsuccessful in defending against patent infringement claims, we could be required to stop developing or commercializing products, pay potentially substantial monetary damages, and/or obtain licenses from third parties, which we may be unable to do on acceptable terms, if at all, and which may require us to make substantial royalty payments. In addition, we could encounter delays in product introductions while we attempt to develop alternative non-infringing products. Any of these or other adverse outcomes could have a material and adverse effect on our business, operating results, and financial condition. See Part I, Item 3. “Legal Proceedings—Ravgen Lawsuit”Note 9 to our consolidated financial statements included elsewhere in this Annual Report for more information regarding a patent infringement suit filed by Ravgen, Inc. related to our discontinued historical laboratory developed test business, which is no longer in operation. There can be no assurance that we will prevail in the Ravgen matter. For example, in a patent infringement suit filed by Ravgen against another laboratory asserting the same patents, a Texas jury found the laboratory liable for infringement and awarded significant damages.

As we move into new markets and develop enhancements to and new applications for our product candidates, competitors have asserted and may in the future assert their patents and other proprietary rights against us as a means of blocking or slowing our entry into such markets or our sales of such new or enhanced products or as a means to extract substantial license and royalty payments from us. Our competitors and others may have significantly stronger, larger, and/or more mature patent portfolios than we have, and additionally, our competitors may be better resourced and highly motivated to protect large, well-established markets that could be disrupted by our product candidates. In addition, future litigation may involve patent holding companies or other patent owners or licensees who have no relevant product revenues and against whom our own patents may provide little or no deterrence or protection.

In addition, our agreements with some of our collaborators, suppliers, and other entities with whom we do business require us to defend or indemnify these parties to the extent they become involved in infringement claims, including the types of claims described

above. We could also voluntarily agree to defend or indemnify third parties if we determine it to be in the best interests of our business relationships. If we are required or agree to defend or indemnify third parties in connection with any infringement claims, we could incur significant costs and expenses that could adversely affect our business, operating results, and financial condition.

57

Because the industries in which we operate are particularly litigious, we are susceptible to intellectual property suits that could cause us to incur substantial costs or pay substantial damages or prohibit us from selling our products under development or conducting our other business.

There is a substantial amount of litigation over patent and other intellectual property rights in the industries in which we operate, including, but not limited to, the biotechnology, life sciences, pharmaceuticals, and medical device industries. Whether a product infringes a patent involves complex legal and factual issues that may be open to different interpretations. Searches typically performed to identify potentially infringed patents of third parties are often not conclusive and because patent applications can take many years to issue, there may be applications now pending, which may later result in issued patents which our future products may infringe. In addition, our competitors or other parties may assert that our product candidates and the methods they employ may be covered by patents held by them. If any of our products infringes a valid patent, we could be prevented from manufacturing or selling it unless we can obtain a license or redesign the product to avoid infringement. A license may not always be available or may require us to pay substantial royalties. Infringement and other intellectual property claims, with or without merit, can be expensive and time-consuming to litigate and could divert our management’s attention from operating our business.

Any inability to effectively protect our proprietary technologies could harm our competitive position.

Our success and ability to compete depend to a large extent on our ability to develop proprietary products and technologies and to maintain adequate protection of our intellectual property in the United States and elsewhere. The laws of some foreign countries do not protect proprietary rights to the same extent as the laws of the United States, and many companies have encountered significant challenges in establishing and enforcing their proprietary rights outside of the United States. These challenges can be caused by the absence of rules and methods for the establishment and enforcement of intellectual property rights in certain jurisdictions outside of the United States. In addition, the proprietary positions of companies in the industries in which we operate generally are uncertain and involve complex legal and factual questions. This is particularly true in the life sciences area where the U.S. Supreme Court has issued a series of decisions setting forth limits on the patentability of natural phenomena, natural laws, abstract ideas and their applications (see, Mayo Collaborative v. Prometheus Laboratories (2012), Association for Molecular Pathology v. Myriad Genetics (2013), and Alice Corporation v. CLS Bank (2014), which has made it difficult to obtain certain patents and to assess the validity of previously issued patents). This uncertainty may materially affect our ability to defend or obtain patents or to address the patents and patent applications owned or controlled by our collaborators and licensors.

We will be able to protect our proprietary rights from unauthorized use by third parties only to the extent that our proprietary technologies are covered by valid and enforceable patents or are effectively maintained as trade secrets. Any finding that our patents or patent applications are invalid or unenforceable could harm our ability to prevent others from practicing the related technology. We cannot be certain that we were the first to invent the inventions covered by pending patent applications or that we were the first to file such applications, and a finding that others have claims of inventorship or ownership rights to our patents and applications could require us to obtain certain rights to practice related technologies, which may not be available on favorable terms, if at all. There may be times when we choose to retain advisors with academic employers who limit their employees’ rights to enter into agreements which provide the kind of confidentiality and assignment provisions congruent with our consulting agreements. We may decide that obtaining the services of these advisors is worth any potential risk, and this may harm our ability to obtain and enforce our intellectual property rights. In addition, our existing patents and any future patents we obtain may not be sufficiently broad to prevent others from practicing our technologies or from developing similar or alternative competing products, or design around our patented technologies, and may therefore fail to provide us with any competitive advantage. Furthermore, as our issued patents expire, we may lose some competitive advantage as others develop competing products that would have been covered by the expired patents, and, as a result, may adversely affect our business, operating results, and financial condition.

We may be required to file or defend infringement lawsuits and other contentious proceedings, such as inter partes reviews, reexaminations, oppositions, and declaratory judgementjudgment actions, to protect our interests, which can be expensive and time-consuming. We cannot assure you that we would prevail over an infringing third party, and we may become subject to counterclaims by such third parties. Our patents may be declared invalid or unenforceable, or narrowed in scope, as a result of such litigation or other proceedings. Some third-party infringers may have substantially greater resources than us and may be able to sustain the costs of complex infringement litigation more effectively than we can. Even if we have valid and enforceable patents, competitors may still choose to offer products that infringe our patents.

Further, preliminary injunctions that bar future infringement by the competitor are not often granted; therefore, remedies for infringement are not often immediately available. Even if we prevail in an infringement action, we cannot assure you that we would be fully or partially financially compensated for any harm to our business. We may be forced to enter into a license or other agreement

with the third parties on terms less profitable or otherwise less commercially acceptable to us than those negotiated between a willing licensee and a willing licensor. Any inability to stop third-party infringement could result in the future in a loss in market share of our products under development, or lead to a delay, reduction, and/or inhibition of our development, manufacture, or sale of some of our

58

products. A product produced and sold by a third-party infringer may not meet our or other regulatory standards or may not be safe for use, which could cause irreparable harm to the reputation of our products, which in turn could result in substantial loss in our market share and profits.

There is also the risk that others, including our competitors in the targeted and systemic therapeutics fields, may independently develop similar or alternative technologies, ingestible devices, or design around our patented or patent pending technologies, and our competitors or others may have filed, and may in the future file, conflicting patent claims covering technology similar or identical to ours. The costs associated with challenging conflicting patent claims could be substantial, and it is possible that our efforts would be unsuccessful and may result in a loss of our patent position and the issuance or validation of the competing claims. Should such competing claims cover our technology, we could be required to obtain rights to those claims at substantial cost.

Any of these factors could adversely affect our ability to obtain commercially relevant or competitively advantageous patent protection for our products under development.

“Submarine” patents may be granted to our competitors, which may significantly alter our launch timing expectations, reduce our projected market size, cause us to modify our product or process or block us from the market altogether.

The term “submarine” patent is used to denote a patent issuing from an application that was not published, publicly known or available prior to its grant. Submarine patents add substantial risk and uncertainty to our business. Submarine patents may issue to our competitors covering our product candidates and thereby cause significant market entry delay, defeat our ability to market our product candidates or cause us to abandon development and/or commercialization of a product candidate.

The issuance of one or more submarine patents may harm our business by causing substantial delays in our ability to introduce a product candidate or other product into the U.S. market.

If we are not able to adequately protect our trade secrets, know-how, and other proprietary information, the value of our technology and products under development could be significantly diminished.

We rely on trade secret protection and proprietary know-how protection for our confidential and proprietary information, and we have taken security measures to protect this information. These measures, however, may not provide adequate protection for our trade secrets, know-how, or other proprietary information. For example, although we have a policy of requiring our consultants, advisors and collaborators to enter into confidentiality agreements and our employees to enter into invention, non-disclosure and, where lawful, noncompete agreements, we cannot assure you that such agreements will provide for a meaningful protection of our trade secrets, know-how or other proprietary information in the event of any unauthorized use or disclosure of information, including as a result of breaches of our physical or electronic security systems, or as a result of our employees failing to abide by their confidentiality obligations during or upon termination of their employment with us. Any action to enforce our rights is likely to be time-consuming and expensive, and may ultimately be unsuccessful, or may result in a remedy that is not commercially valuable. These risks are heightened in countries where laws or law enforcement practices may not protect proprietary rights as fully as in the United States. Any unauthorized use or disclosure of, or access to, our trade secrets, know-how or other proprietary information, whether accidentally or through willful misconduct, could have a material and adverse effect on our programs, our business strategy, and on our ability to compete effectively.

If our trademarks and trade names are not adequately protected, we may not be able to build name recognition in our markets of interest, and our business may be adversely affected.

Failure to maintain our trademark registrations, or to obtain new trademark registrations in the future, could limit our ability to protect our trademarks and impede our marketing efforts in the countries in which we operate. We may not be able to protect our rights to trademarks and trade names which we may need to build name recognition with potential partners or customers in our markets of interest. As a means to enforce our trademark rights and prevent infringement, we may be required to file trademark claims against third parties or initiate trademark opposition proceedings. This can be expensive, particularly for a company of our size, and time-consuming, and we may not be successful. Our registered or unregistered trademarks or trade names may be challenged, infringed, circumvented, declared generic or determined to be infringing on other marks.

Our pending trademark applications in the United States and in other foreign jurisdictions where we may file may not be allowed or may subsequently be opposed. Even if these applications result in registration of trademarks, third parties may challenge our use or registration of these trademarks in the future. Over the long term, if we are unable to establish name recognition based on our trademarks and trade names, then we may not be able to compete effectively and our business may be adversely affected.

We may be subject to claims that our employees, consultants, or independent contractors have wrongfully used or disclosed confidential information of third parties.

We employ individuals who were previously employed at other companies in the industries in which we operate, including biotechnology, pharmaceutical or diagnosticmedical device companies. We may be subject to claims that we or our employees, consultants or independent contractors have inadvertently or willfully used or disclosed confidential information of our employees’ former employers or other third parties. We may also be subject to claims that our employees’ former employers or other third parties have an ownership interest in our patents. Litigation may be necessary to defend against these claims, and if we are unsuccessful, we could be required to pay substantial damages and could lose rights to important intellectual property.

Even if we are successful, litigation could result in substantial costs to us and could divert the time and attention of our management and other employees.

Risks Related to Ownership of Our Common Stock

The market price of our common stock has fluctuated in the past, and is likely to continue to be volatile, which could subject us to litigation.

The market price of our common stock has fluctuated and is likely to be subject to further wide fluctuations in response to numerous factors, many of which are beyond our control, such as those in this “Risk Factors” section and others including:

In addition, if the stock market experiences uneven investor confidence, the market price of our common stock could decline for reasons unrelated to our business, operating results, or financial condition. The market price of our common stock might also decline in reaction to events that affect other companies within, or outside, our industry even if these events do not directly affect us. Some companies that have experienced volatility in the trading price of their stock have been the subject of securities class action litigation. If we are the subject of such litigation, it could result in substantial costs and a diversion of our management’s attention and resources.

We may fail to qualify for continued listing on the Nasdaq, Global Market, which could make it more difficult for our stockholders to sell their shares.

We are required to satisfy the continued listing requirements of the Nasdaq Global Market ("Nasdaq") to maintain such listing, including, among other things, the maintenance of a minimum closing bid price of $1.00 per share and a market value of our common stock of at least $50 million. On June 6, 2022,

For example, on December 11, 2023, we received aformal notice from Nasdaq indicating that we were not in compliance withno longer satisfy the minimum bid price requirements set forth in Nasdaq Listing Rule 5450(a)(1)$50 million market value of listed securities requirement for continued listing on Nasdaq. Nasdaq Listing Rule 5450(a)(1) requires listed securities maintain a minimum closing bid price of $1.00 per share, and(the “MVLS Rule”). In accordance with Nasdaq Listing Rule 5810(c)(3)(A) provides that a failure(C), we will have 180 calendar days, or until June 10, 2024 (the “Compliance Date”), to meetregain compliance with the minimum closing bid price requirement exists ifMVLS Rule. To regain compliance with the deficiency continuesMVLS Rule, our MVLS must equal or exceed $50 million for a periodminimum of 30ten consecutive business days at any time prior to the Compliance Date. If we regain compliance with the MVLS Rule, Nasdaq will provide us with written confirmation and will close the matter.

business days. TheIf we do not regain compliance with the MVLS Rule by the Compliance Date, we will receive written notification of noncompliance had no immediate effect onthat our securities are subject to delisting. At that time, we may appeal the delisting determination to a Hearings Panel or we may be eligible to transfer the listing or trading of our common stock on Nasdaq. On January 19, 2023,securities to The Nasdaq Capital Market (provided that we received notice from Nasdaq thatthen satisfy the bid price deficiency had been cured and we are in compliance with all applicablerequirements for continued listing standards.on that market).

There can be no assurance that we will be able to maintainregain compliance with Nasdaq’s continued listing requirements. If our stock price does not increase or if we are unable to raise additional funds, and if our market capitalization does not meet the minimum standards, we may not be able to maintainmeet the standards for continued listing on Nasdaq.Nasdaq within the compliance period. In the event that we do not maintainregain compliance with the Nasdaq Listing Rules, in the future, we expect to receive written notification that our common stock is subject to delisting. If our common stock is delisted by Nasdaq, we could face significant material adverse consequences, including:

Our common stock may become the target of “short squeezes.”

In the recent past, the securities of several companies have increasingly experienced significant and extreme volatility in stock price due to short sellers of shares of their stock and buy-and-hold decisions of other investors, resulting in what is sometimes described as a “short squeeze.” Short squeezes have caused extreme volatility in the stock prices of those companies and in the market and have led to the price per share of some of those companies to trade at a significantly inflated rate that is disconnected from the underlying value of the company. Sharp rises in a company’s stock price may force traders in a short position to buy the stock to avoid even greater losses. Investors who purchase shares in those companies at an inflated rate face the risk of losing a significant portion of their original investment as the price per share has declined steadily as interest in those stocks have abated. Market activity suggests that we have been the target of a short squeeze, and this could occur again at any time, and stockholders may lose a significant portion or all of their investment if they purchase our shares at a rate that is significantly disconnected from our underlying value.

The issuance of shares of our common stock upon conversion of the Convertible Notes and exercise of warrants will dilute the ownership interests of our stockholders and could depress the trading price of our common stock.

We must settle conversions of our outstanding Convertible Notes and exercise of our outstanding warrants in shares of our common stock, together with cash in lieu of issuing any fractional share in the case of the Convertible Notes. The issuance of shares of our common stock upon conversion of the Convertible Notes or exercise of the warrants will dilute the ownership interests of our stockholders, which could depress the trading price of our common stock. In addition, the market’s expectation that conversions or exercises may occur could depress the trading price of our common stock even in the absence of actual conversions or exercises. Moreover, the expectation of conversions or exercises could encourage the short selling of our common stock, which could place further downward pressure on the trading price of our common stock.

Hedging activity by investors in the Convertible Notes and warrants could depress the trading price of our common stock.

We expect that many investors in our outstanding Convertible Notes and warrants will seek to employ an arbitrage strategy. Under this strategy, investors typically short sell a certain number of shares of our common stock and adjust their short position over time while they continue to hold the Convertible Notes or warrants. Investors may also implement this type of strategy by entering into swaps on our common stock in lieu of, or in addition to, short selling shares of our common stock. This market activity, or the market’s perception that it will occur, could depress the trading price of our common stock.

Provisions in the Indentureindentures governing our outstanding Convertible Notes could delay or prevent an otherwise beneficial takeover of us.

Certain provisions in our Convertible Notes and the Indentureindentures governing the Convertible Notes could make a third-party attempt to acquire us more difficult or expensive. For example, if a takeover constitutes a “fundamental change” (which is defined in the Indentureindentures to include certain change-of-control events and the delisting of our common stock), then noteholders will have the right to require us to repurchase their Convertible Notes for cash. In addition, if a takeover constitutes a “make-whole fundamental change” (which

(which is defined in the Indentureindentures to include, among other events, fundamental changes and certain additional business combination transactions), then we may be required to temporarily increase the conversion rate for the Convertible Notes. In either case, and in

61

other cases, our obligations under the Convertible Notes and the Indentureindentures could increase the cost of acquiring us or otherwise discourage a third party from acquiring us or removing incumbent management, including in a transaction that holders of our common stock may view as favorable.

We may be unable to raise the funds necessary to repurchase the Convertible Notes for cash following a fundamental change or to pay any cash amounts due upon conversion, and our other indebtedness may limit our ability to repurchase our outstanding Convertible Notes.

Noteholders may require us to repurchase their Convertible Notes following a “fundamental change” (which is defined in the Indentureindentures governing the Convertible Notes to include certain change-of-control events and the delisting of our common stock) at a cash repurchase price generally equal to the principal amount of the Convertible Notes to be repurchased, plus accrued and unpaid interest, if any. Furthermore, additional cash amounts may be due upon conversion in certain circumstances if the number of shares that we deliver upon conversion of the Convertible Notes is limited by Nasdaq listing standards. We may not have enough available cash or be able to obtain financing at the time we are required to repurchase the Convertible Notes or pay these cash amounts upon their conversion. In addition, applicable law, regulatory authorities and the agreements governing our other indebtedness may restrict our ability to repurchase the Convertible Notes or pay these cash amounts upon their conversion. Our failure to repurchase Convertible Notes when required or pay these cash amounts upon their conversion will constitute a default under the Indentureindentures governing the Convertible Notes. A default under the Indenture or the fundamental change itself could also lead to a default under agreements governing our other indebtedness, which may result in that other indebtedness becoming immediately payable in full. We may not have sufficient funds to satisfy all amounts due under the other indebtedness and the Convertible Notes.

The accounting method for the Convertible Notes could adversely affect our reported financial results.

The accounting method for reflecting the underlying shares of our common stock in our reported diluted earnings per share may adversely affect our reported earnings and financial condition. We expect that, under applicable accounting principles, the shares underlying our Convertible Notes will be reflected in our diluted earnings per share using the “if-converted” method. Under that method, diluted earnings per share would generally be calculated assuming that all the Convertible Notes were converted into shares of common stock at the beginning of the reporting period, unless the result would be anti-dilutive. The application of the if-converted method may reducefurther increase our reported diluted earningsloss per share.

Furthermore, the conversion features in our Convertible Notes are accounted for as a free-standing embedded derivativederivatives bifurcated from the principal balance of the Convertible Notes. The embedded derivative liability isliabilities are remeasured at fair value each reporting period with positive or negative changes in fair value recorded in our consolidated statement of operations, which may adversely affect our reported earnings and financial condition and result in significant fluctuations in our future financial performance.

General Risk Factors

Insiders have substantial control over us and will be able to influence corporate matters.

As of December 31, 2022,2023, our current directors and executive officers, together with their affiliates, have significant ownership of our outstanding common stock. As a result, these stockholders, if they act, will be able to exercise significant influence over all matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions, such as a merger or other sale of our company or its assets. They may have interests that differ from yours and may vote in a way with which you disagree and that may be adverse to your interests. This concentration of ownership could limit stockholders’ ability to influence corporate matters and may have the effect of delaying, deterring or preventing a third party from acquiring control over us, depriving our stockholders of an opportunity to receive a premium for their common stock as part of a sale of our company, and could negatively impact the value and market price of our common stock.

Future sales and issuances of our common stock or rights to purchase common stock, including pursuant to our equity incentive plans, could result in additional dilution of the percentage ownership of our stockholders and could cause the stock price of our common stock to decline.

In the future, we may sell common stock, convertible securities, or other equity securities in one or more transactions at prices and in a manner we determine from time to time. We also expect to issue common stock to employees, directors, and consultants pursuant to our equity incentive plans. If we sell common stock, convertible securities, or other equity securities in subsequent transactions, or common stock is issued pursuant to equity incentive plans, investors may be materially diluted. New investors in such subsequent transactions could gain rights, preferences, and privileges senior to those of holders of our common stock.

Sales of a substantial number of shares of our common stock in the public market, including through our ATM Facility or by our existing stockholders, or the perception that these sales might occur could depress the market price of our common stock and could impair our ability to raise capital through the sale of additional equity securities. We are unable to predict the effect that sales may have on the prevailing market price of our common stock.

We are an emerging growth company and the reduced disclosure requirements applicable to emerging growth companies may make our common stock less attractive to investors.

We are an emerging growth company. Under the JOBS Act, emerging growth companies can delay adopting new or revised accounting standards until such time as those standards apply to private companies. We have elected to avail ourselves of this exemption and, as a result, will not be subject to the same implementation timing for new or revised accounting standards as are required of other public companies that are not emerging growth companies, which may make comparison of our consolidated financial information to those of other public companies more difficult.

For as long as we continue to be an emerging growth company, however, we intend to take advantage of certain other exemptions from various reporting requirements that are applicable to other public companies including, but not limited to, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and stockholder approval of any golden parachute payments not previously approved. We cannot predict if investors will find our common stock less attractive because we will rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile and experience decreases.

We will remain an emerging growth company until the earliest of (a) the end of the fiscal year (i) following the fifth anniversary of the closing of our IPO, (ii) in which the market value of our common stock that is held by non-affiliates exceeds $700 million and (iii) in which we have total annual gross revenues of $1.235 billion or more during such fiscal year, and (b) the date on which we issue more than $1 billion in non-convertible debt in a three-year period.

We have previously identified material weaknesses in our internal control over financial reporting. If additional material weaknesses in our internal control over financial reporting are discovered or occur in the future, our consolidated financial statements may contain material misstatements and we could be required to restate our financial results, which could adversely affect our stock price and result in an inability to maintain compliance with applicable stock exchange listing requirements.

We previously concluded that there were matters that constituted material weaknesses in our internal control over financial reporting that have since been remediated. A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected and corrected on a timely basis. The material weaknesses related to a lack of (i) controls, as related to our historical testing business prior to our Strategic Transformation, designed to reconcile tests performed and recognized as revenue to billed tests and (ii) appropriately designed or effectively operating controls over the proper recording of accounts payable and accrued liabilities.

If additional material weaknesses in our internal control over financial reporting are discovered or occur in the future, our consolidated financial statements may contain material misstatements and we could be required to restate our financial results. If we are unable to successfully remediate any material weaknesses in our internal controls or if we are unable to produce accurate and timely financial statements, our stock price may be adversely affected, and we may be unable to maintain compliance with applicable stock exchange listing requirements.

If securities or industry analysts do not publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could decline.

The trading market for our common stock depends in part on the research and reports that securities or industry analysts publish about us or our business. If few securities analysts provide coverage of us, or if industry analysts cease coverage of us, the trading price and volume for our common stock could be adversely affected. If one or more of the analysts who cover us downgrade our common stock or publish inaccurate or unfavorable research about our business, our common stock price would likely decline. If one or more of these analysts cease coverage of us or fail to publish reports on us regularly, demand for our common stock could decrease, which might cause our common stock price and trading volume to decline.

Provisions in our certificate of incorporation and bylaws and Delaware law might discourage, delay or prevent a change in control of our company or changes in our management and, therefore, depress the market price of our common stock.

Our eighth amended and restated certificate of incorporation, as amended and our second amended and restated bylaws contain provisions that could depress the market price of our common stock by acting to discourage, delay, or prevent a change in control of our company or changes in our management that the stockholders of our company may deem advantageous. These provisions, among other things:

In addition, Section 203 of the Delaware General Corporation Law may discourage, delay, or prevent a change in control of our company. Section 203 imposes certain restrictions on mergers, business combinations and other transactions between us and holders of 15% or more of our common stock.

Our certificate of incorporation provides that the Court of Chancery of the State of Delaware will be the exclusive forum for substantially all disputes between us and our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors, officers or employees.

Our eighth amended and restated certificate of incorporation, as amended to date, provides that, unless we consent in writing to the selection of an alternative forum, the sole and exclusive forum, to the fullest extent permitted by law, for (1) any derivative action or proceeding brought on our behalf, (2) any action asserting a breach of a fiduciary duty owed by any director, officer or other employee to us or our stockholders, (3) any action asserting a claim against us or any director, officer or other employee arising pursuant to the Delaware General Corporation Law, (4) any action to interpret, apply, enforce or determine the validity of our eighth amended and restated certificate of incorporation, as amended to date, and our second amended and restated bylaws, or (5) any other action asserting a claim that is governed by the internal affairs doctrine, shall be the Court of Chancery of the State of Delaware (or another state court or the federal court located within the State of Delaware if the Court of Chancery does not have or declines to accept jurisdiction), in all cases subject to the court’s having jurisdiction over indispensable parties named as defendants. In addition, our eighth amended and restated certificate of incorporation, as amended to date, provides that the federal district courts of the United States will be the exclusive forum for resolving any complaint asserting a cause of action arising under the Securities Act but that the forum selection provision will not apply to claims brought to enforce a duty or liability created by the Exchange Act. Although we believe these provisions benefit us by providing increased consistency in the application of Delaware law for the specified types of actions and proceedings, the provisions may have the effect of discouraging lawsuits against us or our directors and officers. Alternatively, if a court were to find the choice of forum provision contained in our eighth amended and restated certificate of incorporation, as amended to date, and our second amended and restated bylaws to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could harm our business, financial condition, and operating results. For example, under the Securities Act, federal courts have concurrent jurisdiction over all suits brought to enforce any duty or liability created by the Securities Act, and investors cannot waive compliance with the federal securities laws and the rules and regulations thereunder. Any person or entity purchasing or otherwise acquiring any interest in our shares of capital stock shall be deemed to have notice of and consented to this exclusive forum provision, but will not be deemed to have waived our compliance with the federal securities laws and the rules and regulations thereunder.

64

Item 1B. Unresolved Staff Comments.

None.

Item 1C. Cybersecurity

In the ordinary course of our business, we collect, use, store, and transmit digitally large amounts of confidential, sensitive, proprietary, personal, and protected health information. The secure maintenance of this information and our information technology systems is important to our operations and business strategy. To this end, we have implemented processes designed to assess, identify, and manage risks from potential unauthorized occurrences on or through our information technology systems that may result in adverse effects on the confidentiality, integrity, and availability of these systems and the data residing therein. These processes are managed and monitored by our information technology department, which is led by our Director of Information Technology, and include mechanisms, controls, technologies, systems, and other processes designed to prevent or mitigate data loss, theft, misuse, or other security incidents or vulnerabilities affecting the data and maintain a stable information technology environment. For example, we conduct vulnerability testing, data recovery testing, security audits, and ongoing risk assessments, including due diligence on our key technology vendors, and other contractors and suppliers. We also conduct regular employee training on cyber and information security, among other topics. In addition, we consult with outside advisors and experts, when appropriate, to assist with assessing, identifying, and managing cybersecurity risks, including to anticipate future threats and trends, and their impact on the Company’s risk environment.

Our Director of Information Technology, who has over 15 years of experience managing information technology and cybersecurity matters and holds a Master's Degree in computer science with a concentration in cybersecurity, together with our senior leadership team, is responsible for assessing and managing cybersecurity risks. We consider cybersecurity, along with other significant risks that we face, within our overall enterprise risk management framework. We have not identified risks from known cybersecurity threats, including as a result of any prior cybersecurity incidents, that have materially affected us, but we face certain ongoing cybersecurity risks threats that, if realized, are reasonably likely to materially affect us. Additional information on cybersecurity risks we face is discussed in Part I, Item 1A, “Risk Factors,” under the heading "Our internal information technology systems, or those of any of our third party service providers, or potential future collaborators, may fail or suffer security or data privacy breaches or other unauthorized or improper access to, use of, or destruction of our proprietary or confidential data, employee data or personal data, which could result in additional costs, loss of revenue, significant liabilities, harm to our brand and material disruption of our operations."

Our Board of Directors, as a whole and at the committee level, has oversight of the most significant risks facing us and our processes to identify, prioritize, assess, manage, and mitigate those risks. Our Audit Committee, which is comprised solely of independent directors, oversees our cybersecurity risks. The Audit Committee receives regular updates on cybersecurity and information technology matters and related risk exposures from our Director of Information Technology as well as other members of the senior leadership team. The Board also receives updates from management and the Audit Committee on cybersecurity risks on at least an annual basis.

Item 2. Properties.

We currently lease approximately 25,80015,400 square feet of office space in San Diego, California under severala lease agreementsagreement that expireexpires in June 2023.2025. Additionally, we lease approximately 10,500 square feet of office and laboratory space in San Diego, California under a lease agreement that expires in January 2027. We also own approximately 21,500 square feet of laboratory space in Ann Arbor, Michigan. We also lease approximately 26,5004,500 square feet of office and laboratory space in Ann Arbor, MichiganDallas, Texas under a lease agreement that expires in October 2023. We also lease approximately 4,000 square feet of property located in Irving, Texas, which is used for research and development, under a lease agreement that expires in November 2023.August 2026. We believe our existing facilities will be sufficient for our needs for the foreseeable future.

Item 3. Legal Proceedings.

Refer toThe information in Note 10,9, “Commitments and Contingencies” to the audited financial statements included in this Annual Report on Form 10-K and our Annual Reports and Quarterly Reports on Form 10-Qis incorporated herein by reference. There are no matters which constitute material pending legal proceedings to which we are a party other than those incorporated into this item by reference to Note 9 to the consolidated financial statements for prior periods, for information on our historical and ongoing legal proceedings.

Colorado Recoupment

On July 21, 2021, we received a letter from the Colorado Department of Health Care Policy and Financing (the "Department"), informing us that, as a result of a post-payment review of Medicaid claims from October 2014 to June 2018, the Department is seeking recoupment for historical payments in an aggregate amount of approximately $5.7 million. In December 2021, we received additional correspondence informing us that the Department is seeking recoupment for an additional $3.3 million of historical payments from 2018.

The historical payments for which the Department is seeking recoupment primarily relate to our Preparent expanded carrier screening tests primarily on the basis that such tests were not medically necessary.

We previously entered into settlement agreements with 45 states, including the State of Colorado, as part of a settlement with respect to certain civil claims related to our discontinued legacy billing practices for our non-invasive prenatal tests and microdeletion tests and the provision of alleged kickbacks or inducements to physicians and patients.

We disputed these claims of recoupment with the Department and filed administrative complaints with the State of Colorado Office of Administrative Courts. During the year ended December 31, 2022, we concluded a settlement agreement resolution of the matter that included a dismissal of the complaints and a full release of all the claims, except for approximately $11,000 in claims, which we refunded.2023.

California Subpoena

On July 19, 2021, we received a subpoena from the California Attorney General’s Office, Division of Public Rights (“OAG”), requesting documents and information related to our former genetic testing practices, including NIPT, particularly those with a nexus to California patients. The subpoena is captioned “In the Matter of the Investigation of: Prenatal Genetic Testing Companies.” The OAG has alleged that it has claims under California’s false advertising and unfair business practices laws based on representations about patient billing made in the historical marketing of our legacy genetic testing business. While we believe that our sales and marketing representations were appropriate, we are discussing a potential resolution with OAG, and producing additional materials in connection with those discussions, to determine if the matter can be concluded in our best interests. We are unable to predict the ultimate outcome of this action.

Texas OIG Inquiry

On October 16, 2019, we received an inquiry from the Texas Health & Human Services Commission Office of Inspector General (the "TX OIG"), alleging that we did not hold the required CLIA Laboratory Certificate of Accreditation to perform, bill for, or be reimbursed by the Texas Medicaid Program for certain tests performed by us from January 1, 2015 through December 31, 2018. We submitted a written response to the inquiry on October 23, 2019. In October 2021, we received a letter from the TX OIG asking us to renew our engagement on the matter. During the year ended December 31, 2022, we fully resolved and settled the matter for an immaterial payment in exchange for a release of all claims.

65

Ravgen Lawsuit

On December 22, 2020, Ravgen, Inc. ("Ravgen"), filed suit in the District of Delaware (D. Del. Civil Action No. 1:20-cv-1734)
asserting our infringement of two Ravgen patents based on our former NIPT testing business. The complaint seeks monetary damages and injunctive relief. We responded to the complaint on March 23, 2021.

We believe the claims in Ravgen’s complaint are without merit, and we are vigorously defending against them. On March 1, 2022, the court ordered a stay of the litigation pending resolution of patent validity challenges made against the two patents in inter partes review proceedings currently pending before the Patent Trial and Appeal Board of the United States Patent and Trademark Office. On February 13, 2023 the court ordered the stay lifted. Given the uncertainty of litigation, the early stages of the Ravgen litigation, and the legal standards that must be met for, among other things, success on the merits, we are unable to predict the ultimate outcome of these actions, and therefore cannot estimate the reasonably possible loss or range of loss, if any, that may result from this action.

IPO Litigation

On June 23, 2020, we closed our IPO. Lawsuits were filed on August 28, 2020 and September 11, 2020 against the Company, certain of its executive officers and directors, and the underwriters of the IPO. On December 3, 2020, the U.S. District Court for the SDCA consolidated the two actions, appointed Lin Shen, Lingjun Lin and Fusheng Lin to serve as Lead Plaintiffs, and approved Glancy Prongay & Murray LLP to be Lead Plaintiffs’ Counsel. Lead Plaintiffs filed their first amended complaint on February 4, 2021. Together with the underwriters of the IPO, we moved to dismiss the first amended complaint. On September 1, 2021, the court granted our motion to dismiss, dismissing Lead Plaintiffs’ claims without prejudice. On September 22, 2021, Lead Plaintiffs filed their second amended complaint. Together with the underwriters of the IPO, we moved to dismiss the second amended complaint on November 15, 2021. On January 13, 2023, the court again granted our motion to dismiss, dismissing Lead Plaintiffs' claims for failure to state a claim without prejudice. On February 3, 2023, Lead Plaintiffs filed their third amended complaint, adding information allegedly produced to Plaintiffs in response to freedom of information requests. The third amended complaint alleges that our registration statement and related prospectus for the IPO contained false and misleading statements and omissions in violation of the Securities Act by failing to disclose that (i) we had overbilled government payors for Preparent tests beginning in 2019 and ending in or before early 2020; (ii) there was a high probability that we had received, and would have to refund, a material amount of overpayments from government payors for Preparent tests; (iii) in February 2020 we ended a supposedly improper marketing practice on which the competitiveness of our business depended; and (iv) we were suffering from material negative trends with respect to testing volumes, average selling prices for our tests, and revenues. Lead Plaintiffs seek certification as a class, unspecified compensatory damages, interest, costs and expenses including attorneys’ fees, and unspecified extraordinary, equitable, and/or injunctive relief. We intend to continue to vigorously defend against these claims. Subject to a reservation of rights, we are advancing expenses subject to indemnification to the underwriters of the IPO.

On June 4, 2021, a purported shareholder filed a lawsuit in the U.S. District Court for the SDCA, claiming to sue derivatively on behalf of the Company. The complaint names certain of the Company’s officers and directors as defendants, and names the Company as a nominal defendant. Premised largely on the same allegations as the above-described securities lawsuit, it alleges that the individual defendants breached their fiduciary duties to the Company, wasted corporate assets, and caused the Company to issue a misleading proxy statement in violation of the Exchange Act. The complaint seeks the award of unspecified damages to the Company, equitable and injunctive remedies, and an order directing the Company to reform and improve its internal controls and board oversight. It also seeks the costs and disbursements associated with bringing suit, including attorneys’, consultants’, and experts’ fees. The case is stayed pending the outcome of the motion to dismiss in the above-described securities lawsuit. We intend to vigorously defend against these claims.

On August 17, 2021, we received a letter purportedly on behalf of a stockholder of the Company demanding that our board of directors investigate and take action against certain of the Company’s current and former officers and directors to recover damages for alleged breaches of fiduciary duties and related claims arising out of the IPO litigation discussed above. Our board of directors intends to evaluate the demand and any additional steps to be taken after the resolution of the IPO litigation discussed above.

Given the uncertainty of litigation, the preliminary stages of the IPO litigation, and the legal standards that must be met for, among other things, success on the merits, we are unable to predict the ultimate outcome of these actions, and therefore cannot estimate the reasonably possible loss or range of loss, if any, that may result from this action.

Item 4. Mine Safety Disclosures.

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Information

Our common stock, par value $0.001 per share, is traded on the Nasdaq Global Market under the symbol “BIOR”.

Holders

As of March 20, 2023,2024, there were approximately 50 stockholders of record of our common stock. Since many of our shares of common stock are held by brokers and other institutions on behalf of stockholders, we are unable to estimate the total number of stockholders represented by these record holders.

Dividends

We anticipate that we will retain earnings, if any, to support operations and research and development activities and finance the growth and development of our business and, therefore, do not expect to pay cash dividends in the foreseeable future. In addition, the terms of our convertible notesConvertible Notes restrict our ability to pay dividends, subject to certain exceptions.

Recent Sales of Unregistered Securities

None.

Item 6. ReservedReserved.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our financial statements and notes thereto and other financial information included elsewhere in this Annual Report. Some of the information contained in this discussion and analysis includes forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from those described in or implied by these forward-looking statements. Factors that could cause or contribute to such differences include, but are not limited to, those identified below and those discussed in the section titled “Risk Factors” included elsewhere in this Annual Report.

Overview

We are a clinical-stage biotechnology company developing oral biotherapeutics that could enable new treatment approaches in the delivery of therapeutics. Our therapeutics pipeline is divided intoincludes two therapeutic delivery mechanisms:platforms:

Our mission is to reimagine therapeutics and their delivery. By creating innovative smart pills designed for targeted drug delivery to the GI tract and systemic, needle-free delivery of biotherapeutics, we are developing therapies intended to improve human health through a more advanced approach to biotherapeutic delivery.patients’ lives.

Our historical operations included a licensed Clinical LicenseLaboratory Improvement AmendmentAmendments and College of American Pathologists certified laboratory specializing in the molecular testing markets serving women’s health providers in the obstetric, gynecological, fertility, and maternal fetal medicine specialty areas. Previously, our core business was focused on the prenatal carrier screening and noninvasive prenatal test market, targeting preconception planning and routine pregnancy management for genetic disease risk assessment. Through our former affiliation with Mattison Pathology, LLP, a Texas limited liability partnership doing business as Avero, Diagnostics (“Avero”), our historical operations also included anatomic and molecular pathology testing products in the United States.

Common Stock Reverse Split

On December 29, 2022, we filed a certificate of amendment to our eighth amended and restated certificate of incorporation (the “Certificate of Amendment”) to effect, as of January 3, 2023, a 1-for-25 reverse split of our common stock. The Certificate of Amendment also decreased the number of authorized shares of our common stock from 350,000,000 to 164,000,000. All shares, options, restricted stock units, warrants and per share amounts included in this Annual Report on Form 10-K have been retroactively adjusted to reflect the stock split.

Strategic Transformation and Factors Affecting Our Performance

In June 2021, we announced a strategic transformation ("Strategic Transformation") pursuant to which we are refocusing our efforts on our robust research and development pipeline to better position the business for future growth. The Strategic Transformation includes the closure of our genetics laboratory in Ann Arbor, Michigan, the sale of our Avero laboratory business, a reduction in force and other cost-cutting measures and operational improvements.

Prior to the closure of our genetics laboratory in Ann Arbor, Michigan, we generated revenue by providing tests through our Ann Arbor laboratory, including throughout most of the second quarter of 2021. We received payments for such tests from payors, laboratory distribution partners, and self-paying individuals, and more than 95% of payments for our tests we received through reimbursement. We received reimbursement from several distinct channels: commercial third-party payors, laboratory distribution partners, and government health benefits programs such as Medicare and Medicaid. Due to the typical lag in payment following performance of a test, we expect to continue to receive reimbursement payments for a period of time following the closure of the laboratory.

In the second quarter of 2020, we added COVID-19 testing to our offering and began offering COVID-19 testing nationally in mid-November 2020. We are no longer performing COVID-19 testing following the shut-down of our Laboratory Operations.

We are engaged in research and development activities with respect to therapeutics product candidates. Following the Strategic Transformation, we are devoting substantially all of our resources to developing and perfecting our intellectual property rights, conducting research and development activities (including undertaking preclinical and clinical studies of our therapeutics product candidates), conducting clinical trials of our most advanced therapeutics product candidates, organizing and staffing our company,

68

business planning and raising capital. We do not have any therapeutics products approved for sale, and we have not generated any revenue from therapeutics product sales.

Our business involves significant investment in research and development activities for the development of new products. We intend to continue investing in our pipeline of new products and technologies. We expect our investment in research and development to increase as we pursue regulatory approval of our targeted therapeutics and systemic therapeutics product candidates. The achievement of key development milestones is a key factor in evaluating our performance.

We expect to continue to incur significant expenses and increasing operating losses in the near term. While we materially reduced our spend profile as a result of the Strategic Transformation in 2021, weWe expect our expenses may increase in connection with our ongoing activities as we:

We do not expect to generate significant product revenue unless and until we successfully complete development and obtain regulatory and marketing approval of, and begin to sell, one or more of our targeted therapeutics and systemic therapeutics product candidates, which we expect will take several years. We expect to spend a significant amount in development costs prior to such time. We may never succeed in achieving regulatory and marketing approval for our therapeutics product candidates. We may obtain unexpected results from our preclinical and clinical trials. We may elect to discontinue, delay or modify preclinical and clinical trials of our therapeutics product candidates. A change in the outcome of any of these variables with respect to the development of a product candidate could mean a significant change in the costs and timing associated with the development of that product candidate. Accordingly, until such time as we can generate significant product revenue, if ever, we expect to continue to seek private or public equity and debt financing to meet our capital requirements. There can be no assurance that such funding may be available to us on acceptable terms, or at all, or that we will be able to commercialize our therapeutics product candidates. In addition, we may not be profitable even if we commercialize any of our therapeutics product candidates.

Key Components of Our Results of Operations

We are providing the following summary of our revenues, research and development expenses and selling, general and administrative expenses to supplement the more detailed discussion below. This summary excludes our revenues, research and development expenses, selling and marketing, general and administrative and other expenses associated with our Laboratory Operations, which are reported within loss from discontinued operations.

Revenue

Historically, all of our revenue has been derived from molecular laboratory tests, principally from the sale of NIPT, genetic carrier screening, and pathology molecular testing. If our development efforts for our targeted therapeutics and systemic therapeutics product candidates are successful and result in regulatory approval, we may generate revenue from future product sales. If we enter into license or collaboration agreements for any of our therapeutics product candidates, other pipeline products or intellectual property, we may generate revenue in the future from payments as a result of such license or collaboration agreements. We cannot predict if, when, or to what extent we will generate revenue from the commercialization and sale of our therapeutics product candidates or from license or collaboration agreements. We may never succeed in obtaining regulatory approval for any of our therapeutics product candidates.

Research and Development

Research and development expenses consist primarily of costs associated with developing new products, including our therapeutics product candidates. Research and development expenses also consist of personnel expenses, including salaries, bonuses,

69

stock-based compensation expense, benefits, consulting costs, and allocated overhead costs. Research and development costs are expensed as incurred.

We plan to continue investing in research and development activities for the foreseeable future as we focus on our targeted therapeutics and systemic therapeutics programs through preclinical studies and clinical trials. We expect our investment in research and development to remain relatively flat in 2024 as we pursue regulatory approval ofcontinue clinical trials for our product candidates and as we seek to expand our pipeline of product candidates.

Product candidates in later stages of clinical development generally have higher development costs than those in earlier stages of clinical development, primarily due to the increased size and duration of later-stage clinical trials. While we plan to partner with large pharmaceutical companies, especially for the later stage clinical work, we still expect our research and development expenses to increase over the next several years as we conduct additional preclinical studies and clinical trials, including later-stage clinical trials, for our current and future product candidates and pursue regulatory approval of our product candidates. The process of conducting the necessary preclinical and clinical research to obtain regulatory approval is costly and time consuming. The actual probability of success for our product candidates may be affected by a variety of factors including:

We may never succeed in achieving regulatory approval for any of our product candidates due to the uncertainties discussed above. We are unable to determine the duration and completion costs of our research and development projects or when and to what extent we will generate revenue from the commercialization and sale of our product candidates, if ever.

Due to the impact of the COVID-19 pandemic, certain of our research and development activities have been delayed and may be further delayed. For more information on risks related to COVID-19, see "Risk Factors—Unfavorable global economic conditions, whether brought about by global crises, health epidemics, military conflicts and war, geopolitical and trade disputes or other factors, may have a material adverse effect on our business and financial results."

Selling, General and Administrative

Selling, general and administrative expenses consist primarily of personnel costs, including salaries, bonuses, stock-based compensation expense, and benefits, for our finance and accounting, legal, human resources, and other administrative teams. Additionally, these expenses include costs for communication, advertising,communications, conferences, and professional fees of audit, legal, and recruiting services. Additionally, expenses related to maintaining compliance with the stipulations of the government settlement and the legal costs associated with the legal matters described in Part I, Item 3. “Legal Proceedings”Note 9, "Commitments and Contingencies" in this Annual Report are included. We expect our selling, general and administrative expenses to decrease as a result of our discontinued Laboratory Operations and decreased headcount.in 2024.

Interest Expense, Net

Interest expense, net is primarily attributable to borrowings under our Credit Agreement (as defined below), our mortgages payable,credit and security agreements, lease agreements and interest income earned from our cash and cash equivalents.

Gain (Loss) on Warrant Liabilities

Gain (loss) on warrant liabilities consists of losses on warrant issuances and changes in the fair value of our liability-classified warrants to purchase common stock.

70

Other (Expense) Income, Net

Other (expense) income, net primarily consists of changes in the fair value of our embedded derivative liabilityliabilities related to the 2028 Convertible Notes, and inducement loss and extinguishment loss on ourthe Convertible Notes.Notes, gains and losses on investments, impairment of property and equipment, and loss on disposals of property and equipment.

Income Tax Provision

We account for income taxes under the asset-and-liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax basis, and operating loss and tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.

We recognize the effect of income tax positions only if those positions are more likely than not of being sustained. Recognized income tax positions are measured at the largest amount that is more than 50% likely of being realized. Changes in recognition or measurement are recognized in the period in which the change in judgment occurs. Valuation allowances are established, when necessary, to reduce deferred tax assets to the amount expected to be realized. Due to losses generated in the past and projected future taxable losses anticipated in the future, we established a 100% valuation allowance on net deferred tax assets.

Results of Operations.

Comparison of the Years Ended December 31, 20222023 and 20212022

Revenue

As a result of the classification of the Company's Laboratory Operations to discontinued operations, all revenue from Laboratory Operations has been classified as discontinued operations. The remaining revenue is related to license and collaboration agreements.

Research and Development Expenses

The decrease in researchResearch and development expenses wasincreased by $5.8 million for the year ended December 31, 2023 compared to the year ended December 31, 2022, primarily attributable to a decreasean increase in salary and benefits, consulting and professional fees, clinical trial expenses and supplies costs, offset by a decrease in the cost of supplies and facilities.

71

facilities costs.

Selling, General and Administrative Expenses

The decrease in selling,Selling, general and administrative expenses wasdecreased by $0.7 million for the year ended December 31, 2023 compared to the year ended December 31, 2022, primarily attributable to a decreasean increase in salary and benefits and consulting and professional fees, offset by a decrease in software costs, business insurance and facilities costs.

Interest Expense, Net

The decrease in interestInterest expense, net wasdecreased by $1.2 million for the year ended December 31, 2023 compared to the year ended December 31, 2022, primarily due to a decrease in the balance of 2025 Convertible Notes due to conversions during 2021.from the September and December note exchanges.

Gain (Loss) on Warrant Liabilities

* The change is more than 100%

The change in gain (loss)Gain on warrant liabilities wasdecreased by $2.9 million for the year ended December 31, 2023 compared to the year ended December 31, 2022, due to the loss on issuance of new warrants during the year and the change in fair value of the warrant liabilities for warrants issued during 2021 and in November 2022.outstanding warrants.

Other (Expense) Income, Net

The decrease in otherOther (expense) income, net was primarily due to a gain recognized on our embedded derivative liability related to the Convertible Notes and an inducement loss related to conversions of Convertible Notesdecreased by $68.1 million for the year ended December 31, 20212023 compared to the year ended December 31, 2022, primarily due to an inducement loss of $53.2 million, the remaining impact is due to an extinguishment loss on our 2025 Convertible Notes, a loss on the change in fair value of the derivative liabilities for the 2028 Convertible Notes, impairment on investment in Enumera Molecular, Inc. ("Enumera") and a gain on investment in Enumera for the year ended December 31, 2022 that did not reoccur in 2022 and a loss on asset disposals during 2022, offset by a gain of $5.7 million on our investment in Enumera.for the year ended December 31, 2023.

Income Tax Benefit

* The change is more than 100%

The increase in incomeIncome tax benefit wasdecreased by $0.3 million for the year ended December 31, 2023 compared to the year ended December 31, 2022, primarily due to prior year federal and state income tax refunds offset by recognition of a deferred tax liability related to Enumera.that did no reoccur for the year ended December 31, 2023.

Discontinued Operations

* The change is more than 100%

The change in gain (loss)Gain from discontinued operations wasdecreased by $10.5 million for the year ended December 31, 2023 compared to the year ended December 31, 2022 due to the closure of our Laboratory Operations during 2021 and a partial reversal of a third-party payor accrual.2021. See Notes 4 and 10Note 3 to our consolidated financial statements included elsewhere in this Annual Report for additional information regarding discontinued operations and commitments and contingencies.operations.