Seasonality has played an increasingly important role in the market for chip manufacturing tools. The period of November through February has been a particularly weak period historically for manufacturers of chip tools, in part because capital equipment needed to support manufacturing of chips for the December holidays usually needs to be in the supply chain by no later than October and chip makers in Asia often wait until after Chinese, or Lunar, New Year, which occurs in January or February, before implementing their capital acquisition plans. The timing of new product releases also has an impact on seasonality, with the acquisition of manufacturing equipment occurring six to nine months before a new release.

Many of these factors are beyond our control, and the occurrence of one or more of them could cause our operating results to vary widely. As a result, it is difficult for us to forecast our quarterly revenue accurately. Our results of operations for any quarter may not be indicative of results for future quarters and quarter-to-quarter comparisons of our operating results are not necessarily meaningful. Variability in our periodic operating results could lead to volatility in our stock price. Because a substantial proportion of our expenses are relatively fixed in the short term, our results of operations will suffer if revenue falls below our expectations in a particular quarter, which could cause the price of Class A common stock to decline. Moreover, as a result of any of the foregoing factors, our operating results might not meet our announced guidance or expectations of public market analysts or investors, in which case the price of Class A common stock could decrease significantly.

Cyclicality in the semiconductor industry is likely to lead to substantial variations in demand for our products, and as a result our operating results could be adversely affected.

The chip industry has historically been cyclic and is characterized by wide fluctuations in product supply and demand. From time to time, this industry has experienced significant downturns, often in connection with, or in anticipation of, maturing product and technology cycles, excess inventories and declines in general economic conditions. This cyclicality could cause our operating results to decline dramatically from one period to the next.

Our business depends upon the capital spending of chip manufacturers, which, in turn, depends upon the current and anticipated market demand for chips. During industry downturns, chip manufacturers often have excess manufacturing capacity and may experience reductions in profitability due to lower sales and increased pricing pressure for their products. As a result, chip manufacturers generally sharply curtail their spending during industry downturns and historically have lowered their spending more than the decline in their revenues. If we are unable to control our expenses adequately in response to lower revenue from our customers, our operating results will suffer and we could experience operating losses. For example, certain industry analysts, such as Gartner, forecast a downturn in 2023 for global WFE investments, as further described in “Item 1. Business”. We cannot reasonably estimate the duration or impact of such a downturn, and it could have a material adverse effect on our business and the value of our Class A common stock.

Conversely, during industry upturns we must successfully increase production output to meet expected customer demand. This may require us or our suppliers, including third-party contractors, to order additional inventory, hire additional employees and expand manufacturing capacity. If we are unable to respond to a rapid increase in demand for our tools on a timely basis, or if we misjudge the timing, duration or magnitude of such an increase in demand, we may lose business to our competitors or incur increased costs disproportionate to any gains in revenue, which could have a material adverse effect on our business, results of operations, financial condition or cash flows.

The PRC government is implementing focused policies, including state-led investment initiatives, that aim to create and support an independent domestic semiconductor supply chain spanning from design to final system production. If these policies, which include loans and subsidies, result in lower demand for equipment than is expected by equipment manufacturers, the resulting overcapacity in the chip manufacturing equipment market could lead to excess inventory and price discounting that could have a material adverse effect on our business and operating results.

In addition, defects in our tools or our inability to meet the needs of our customers could cause damage to our customers’ products or manufacturing facilities, which could result in claims for product liability, tort or breach of warranty, including claims from our customers. The cost of defending such a lawsuit, regardless of its merit, could be substantial and could divert management’s attention from our ongoing operations. In addition, if our business liability insurance coverage proves inadequate with respect to a claim or future coverage is unavailable on acceptable terms or at all, we may be liable for payment of substantial damages. Any or all of these potential consequences could have an adverse impact on our operating results and financial condition.

Warranty claims in excess of our estimates could adversely affect our business.

We have provided warranties against manufacturing defects of our tools that range from 12 to 36 months in duration. Our product warranty requires us to provide labor and parts necessary to repair defects. As of December 31, 2020,2022, we had accrued $4.0$8.8 million in liability contingency for potential warranty claims. Warranty claims substantially in excess of our expectations, or significant unexpected costs associated with warranty claims, could harm our reputation and could cause customers to decline to place new or additional orders, which could have a material adverse effect on our business, results of operations and financial condition.

We rely on third parties to manufacture significant portions of our tools and our failure to manage our relationships with these parties could harm our relationships with our customers, increase our costs, decrease our sales and limit our growth.

Our tools are complex and require components and subassemblies having a high degree of reliability, accuracy and performance. We rely on third parties to manufacture most of the subassemblies and supply most of the components used in our tools. Accordingly, we cannot directly control our delivery schedules and quality assurance. This reliance on third parties and lack of control could result in shortages or quality assurance problems. In addition, supply chain constraints have intensified due to a variety of factors, including the ongoing COVID-19 pandemic and the June 2022 truck driver strike in South Korea, where certain of our operations and customers are located. See also “—Our supply chain may be materially adversely impacted due to global events, including continuing COVID-19 outbreaks, transportation delays and the armed conflict in Ukraine.”These issues and our ability to manage increased demand could delay shipments of our tools, increase our testing or production costs or lead to costly failure claims.

We do not have long-term supply contracts with some of our suppliers, and those suppliers are not obligated to perform services or supply products to us for any specific period, in any specific quantities or at any specific price, except as may be provided in a particular purchase order. In addition, we attempt to maintain relatively low inventories and acquire subassemblies and components only as needed. There are significant risks associated with our reliance on these third-party suppliers, including:

Any delays in the shipment of our products due to our reliance on third-party suppliers could harm our relationships with our customers. In addition, any increase in costs due to our suppliers increasing the price they charge us for subassemblies and components or arising from our need to replace our current suppliers that we are unable to pass on to our customers could negatively affect our operating results.

Any shortage of components or subassemblies could result in delayed delivery of products to us or in increased costs to us, which could harm our business.

The ability of our manufacturers to supply our tools is dependent, in part, upon the availability of certain components and subassemblies. Our manufacturers may experience shortages in the availability of such components or subassemblies, which could result in delayed delivery of products to us or in increased costs to us. Any shortage of components or subassemblies or any inability to control costs associated with manufacturing could increase the costs for our products or impair our ability to ship orders in a timely cost-efficient manner. As a result, we could experience cancellation of orders, refusal to accept deliveries or a reduction in our prices and margins, any of which could harm our financial performance and results of operations.

We depend on a limited number of suppliers, including single source suppliers, for critical components and subassemblies, and our business could be disrupted if they are unable to meet our needs.

We depend on a limited number of suppliers for components and subassemblies used in our tools. Certain components and subassemblies of our tools have only been purchased from our current suppliers to date and changing the source of those components and subassemblies may result in disruptions during the transition process and entail significant delay and expense. We rely on: Product Systems, Inc., or ProSys, as the sole supplier of megasonic transducers, a key subassembly used in our single-wafer cleaning equipment; Ninebell Co., Ltd., or Ninebell, as the principal supplier of robotic delivery system subassemblies used in our single-wafer cleaning equipment; and Advanced Electric Co. Inc., as a key supplier of valves used in our single-wafer cleaning equipment. An adverse change to our relationship with any of these suppliers would disrupt our production of single-wafer cleaning equipment and could cause substantial harm to our business.

With some of these suppliers, we do not have long-term agreements and instead purchase components and subassemblies through a purchase order process. As a result, these suppliers may stop supplying us components and subassemblies, limit the allocation of supply and equipment to us due to increased industry demand or significantly increase their prices at any time with little or no advance notice. Our reliance on a limited number of suppliers could also result in delivery problems, reduced control over product pricing and quality, and our inability to identify and qualify another supplier in a timely manner.

Moreover, some of our suppliers may experience financial difficulties that could prevent them from supplying us with components or subassemblies used in the design and manufacture of our products. In addition, our suppliers, including our sole supplier ProSys, may experience manufacturing delays or shut downs due to circumstances beyond their control, such as labor issues, political unrest or natural disasters. Any supply deficiencies could materially and adversely affect our ability to fulfill customer orders and our results of operations. We have in the past and may in the future, experience delays or reductions in supply shipments, which could reduce our revenue and profitability. If key components or materials are unavailable, our costs would increase and our revenue would decline.

We have experienced rapid growth in our business recently due, in part, to an expansion of our product offerings and an increase in the number of customers that we serve. For example, our headcount grew by 38% in 2022, 62% in 2021, and 50% in 2020, 32% in 2019, and 35% in 2018.2020. We will seek to continue to expand our operations in the future, including by adding new offices, locations and employees. Managing our growth has placed and could continue to place a significant strain on our management, other personnel and our infrastructure. If we are unable to manage our growth effectively, we may not be able to take advantage of market opportunities, develop new products, enhance our technological capabilities, satisfy customer requirements, respond to competitive pressures or otherwise execute our business plan. In addition, any inability to manage our growth effectively could result in operating inefficiencies that could impair our competitive position and increase our costs disproportionately to the amount of growth we achieve. To manage our growth, we believe we must effectively:

Our organizational structure has become more complex, including as a result of preparations for the STAR Listing and the STAR IPO. We will need to continue to scale and adapt our operational, financial and management controls, as well as our reporting systems and procedures, at both ACM Research and ACM Shanghai. The continued expansion of our infrastructure will require us to commit substantial financial, operational and management resources before our revenue increases and without any assurances that our revenue will increase.

We are highly dependent on our Chief Executive Officer and President and other senior management and key employees.

Our success largely depends on the skills, experience and continued efforts of our management, technical and sales personnel, including in particular Dr. David H. Wang, the Chair of the Board, Chief Executive Officer and President of ACM Research. All of our senior management are at-will employees, which means either we or the employee may terminate their employment at any time. If one or more of our other senior management personnel were unable or unwilling to continue their employment with us, we may not be able to replace them in a timely manner. Moreover, in connection with planning for the STAR Listing and the STAR IPO, ACM Shanghai is now managed by a group of officers separate from those of ACM Research and those officers owe fiduciary duties to the various stakeholders of ACM Shanghai. We do not have employment or retention agreements with, or maintain key person life insurance policies on, any of our employees. Our business may be severely disrupted and our financial condition and results of operations may be materially and adversely affected. In addition, our senior management may join a competitor or form a competing company. The loss of Dr. Wang or other key management personnel, including our Chief Financial Officer, could significantly delay or prevent the achievement of our business objectives.

Failure to attract and retain qualified personnel could put us at a competitive disadvantage and prevent us from effectively growing our business.

Our future success depends, in part, on our ability to continue to attract and retain highly skilled personnel. There is substantial competition for experienced management, technical and sales personnel in the chip equipment industry. If qualified personnel become scarce or difficult to attract or retain for compensation-related or other reasons, we could experience higher labor, recruiting or training costs. New hires may require significant training and time before they achieve full productivity and may not become as productive as we expect. If we are unable to retain and motivate our existing employees and attract qualified personnel to fill key positions, we may experience inadequate levels of staffing to develop and market our products and perform services for our customers, which could have a negative effect on our operating results.

Our ability to utilize certain U.S. and state net operating loss carryforwards may be limited under applicable tax laws.

As of December 31, 2020,2022, we had net operating loss carryforward amounts, or NOLs, of $45.0$4.4 million for U.S. federal income tax purposes and $545,000$0.5 million for U.S. state income tax purposes. As of December 31, 2019,2021, we had net operating loss carryforward amounts, or NOLs of $12.2$56.1 million for U.S. federal income tax purposes and $559, 000$0.5 million for U.S. state income tax purposes. The federal and state NOLs will expire at various dates in the future.

Utilization of these NOLs could be subject to a substantial annual limitation if the ownership change limitations under U.S. Internal Revenue Code Sections 382 and 383 and similar U.S. state provisions are triggered by changes in the ownership of our capital stock. Such an annual limitation would result in the expiration of the NOLs before utilization. Our existing NOLs may be subject to limitations arising from previous ownership changes, including in connection with our initial public offering and concurrent private placement in November 2017, our follow onfollow-on public offering in August 2019, and any future equity issuances. Future changes in our stock ownership, some of which are outside of our control, could result in an ownership change. Regulatory changes, such as suspensions on the use of NOLs, or other unforeseen reasons, may cause our existing NOLs to expire or otherwise become unavailable to offset future income tax liabilities. Additionally, U.S. state NOLs generated in one state cannot be used to offset income generated in another U.S. state. For these reasons, we may be limited in our ability to realize tax benefits from the use of our NOLs, even if our profitability would otherwise allow for it.

Acquisitions that we pursue in the future, whether or not consummated, could result in other operating and financial difficulties.

In the future we may seek to acquire additional product lines, technologies or businesses in an effort to increase our growth, enhance our ability to compete, complement our product offerings, enter new and adjacent markets, obtain access to additional technical resources, enhance our intellectual property rights or pursue other competitive opportunities. We may also make investments in certain key suppliers to align our interests with such suppliers. If we seek acquisitions, we may not be able to identify suitable acquisition candidates at prices we consider appropriate. We cannot readily predict the timing or size of our future acquisitions, or the success of any future acquisitions.

From time to time, we may enter into negotiations for acquisitions or investments that are not ultimately consummated. These negotiations could result in significant diversion of management time, as well as substantial out-of-pocket costs, any of which could have a material adverse effect on our business, operating results and financial condition.

Future declines in the semiconductor industry, and the overall world economic conditions on which the industry is significantly dependent, could have a material adverse impact on our results of operations and financial condition.

Our business depends on the capital equipment expenditures of chip manufacturers, which in turn depend on the current and anticipated market demand for integrated circuits. With the consolidation of customers within the industry, the chip capital equipment market may experience rapid changes in demand driven both by changes in the market generally and the plans and requirements of particular customers. Global economic and business conditions, which are often unpredictable, have historically impacted customer demand for our products and normal commercial relationships with our customers, suppliers and creditors. Additionally, in times of economic uncertainty our customers’ budgets for our tools, or their ability to access credit to purchase them, could be adversely affected. This would limit their ability to purchase our products and services. As a result, economic downturns could cause material adverse changes to our results of operations and financial condition including:

Fluctuating levels of investment by chip manufacturers may materially affect our aggregate shipments, revenue, operating results and earnings. Where appropriate, we will attempt to respond to these fluctuations with cost management programs aimed at aligning our expenditures with anticipated revenue streams, which could result in restructuring charges. Even during periods of reduced revenues, we must continue to invest in research and development and maintain extensive ongoing worldwide customer service and support capabilities to remain competitive, which may temporarily harm our profitability and other financial results.

ACM Shanghai utilizes certain items subject to export controls under the U.S. Export Administration Regulations (EAR) in manufacturing and supplying its products. The EAR applies to exports of our operationscommodities, software and technology from the United States, including for use in manufacturing products outside the United States, and face risks associated with conducting business in foreign markets.

Alongside these new restrictions, BIS has also continued to designate additional PRC entities, many involved in the semiconductor manufacturing industry, on restricted party lists under the EAR, such as the Entity List and the Unverified List. These designations impose licensing requirements for the supply of products to such entities. In most cases, any items subject to the EAR, including foreign produced products with specified U.S. content, now require an export license from BIS before they can be supplied to the newly listed PRC entities, regardless of their export classification. In December 2020, SMIC, one of the largest chip manufacturers in the PRC and one of our key customers, was one of numerous entities added to the Entity List.  Challenges faced by SMIC and its key suppliers as a result of the listing have indirectly impacted SMIC’s demand for, and ACM Shanghai’s ability to supply, ACM Shanghai products. More recently, in October 2022, YMTC, a leading PRC memory chip company and one of our key customers, was added to the Unverified List of the EAR alongside a number of risks associated with our international business activities, including:other Chinese entities. The Unverified List identifies parties for whom BIS has been unable to confirm their bona fides (i.e., legitimacy and reliability about the end-use and end-user of items subject to the EAR). Entities listed on the Unverified List are ineligible to receive items subject to the EAR by means of a license exception if a U.S. export license is required. In December 2022, YMTC was moved from the Unverified List to the Entity List. Challenges faced by YMTC and its key suppliers as a result of the listing could indirectly impact YMTC’s demand for, or ACM Shanghai’s ability to supply, ACM Shanghai products.

Also in October 2022, BIS announced new rules that significantly expanded U.S. export controls as applied to advanced IC products, related manufacturing equipment and technology, and supercomputers, where the destination or ultimate end user is based in the PRC. In particular, the Asian market is extremely competitive,case of semiconductor manufacturing equipment, the new rules require an export license for the export, re-export, or transfer to or within the PRC of additional types of semiconductor manufacturing equipment, items for use in manufacturing designated types of semiconductor manufacturing equipment, and chip manufacturerssemiconductor manufacturing equipment for use at certain IC manufacturing and development facilities in the PRC.  License applications for these exports are reviewed under a presumption of denial.  In addition, BIS imposed new restrictions by which U.S. persons anywhere in the world are effectively barred from engaging in certain activities related to the development and production of semiconductors at PRC fabrication facilities meeting specified criteria, even if no items subject to the EAR are involved.

ACM Shanghai has determined that several of its customers have PRC-based facilities that meet the restricted criteria, and has also determined that several of its products may meet the parameters of export control classification numbers, or ECCNs, affected by the restrictions. Accordingly, depending on the details of the final implementation of these new restrictions and associated licensing policies, ACM may not be aggressiveable to import, or may face substantial restrictions in seeking price concessionsimporting, parts from suppliers,the United States to support tool shipments to such facilities, or to be embedded into tools defined by affected ECCNs.  ACM and ACM Shanghai have implemented modifications to their existing business policies and practices in response to the new restrictions, including chip equipment manufacturers.by imposing limitations on the activities of their U.S. persons and their supply chains more broadly to comply with the new regulations.

We believe that as a result of the new restrictions, several ACM Shanghai customers have significantly reduced production and related capital spending at facilities meeting the restricted advanced node capabilities. In addition, ACM Shanghai has experienced challenges as the companies in its supply chain adapt their policies to the new regulations. These factors had an adverse impact on ACM Shanghai’s shipments and sales in the three months ended December 31, 2022.  We anticipate these factors will continue to have an adverse impact on ACM Shanghai’s shipments and sales in future periods.

We cannot be certain what additional actions the U.S. government may not be successfultake with respect to PRC entities, or whether such actions will impact our relationships with our PRC-based customers. Additional actions could take the form of further revisions to the Entity List or Unverified List, new export restrictions, additional tariffs or other trade restrictions.  It is also possible that other countries could adopt similar semiconductor-focused export controls to align with the October 2022 U.S. actions. Press reports indicate that two countries involved in developingACM Shanghai’s current supply chain, Japan and implementing policiesthe Netherlands, are currently considering similar measures. The introduction of multilateral semiconductor-focused export controls could further negatively impact ACM Shanghai’s supply chain from potentially affected countries and, strategiesindirectly, the ability of our customers in the PRC to scale their production.  We are unable to predict the duration of the restrictions imposed by the U.S. government or the effects of any future governmental actions by the U.S. or other countries that will be effective in managing these risks in each country inmay impact our relationships with our PRC-based customers, any of which we do business. Our failure to manage these risks successfully could adversely affecthave a long-term adverse effect on our business, operating results and financial condition.

Changes in government trade policies could limit the demand for our tools and increase the cost of our tools.

General trade tensions between the United States and the PRC escalated beginning in 2018. In each of July, August and September 2018, June and September 2019, and February 2020, the U.S. government imposed a round of new or higher tariffs on specified imported products originating from the PRC in response to what the U.S. government characterizescharacterized as unfair trade practices. The PRC government responded to each of these rounds of U.S. tariff changes by imposing new or higher tariffs on specified products imported from the United States. Higher duties on existing tariffs and furtheradditional rounds of tariffs have been announcedsuggested or threatened by U.S. and PRC leaders.officials.

The imposition of heightened tariffs on imports by both the U.S. and PRC governments and the surrounding economic uncertainty may negatively impact the semiconductor industry, including by reducing the demand of fabricators for capital equipment such as our tools. Further changes in trade policy, including by tariffs, additional taxes, restrictions on exports or other trade barriers, or restrictions on supplies, equipment, and raw materials including rare earth minerals, may limit the ability of our customers to manufacture or sell semiconductors or to make the manufacture or sale of semiconductors more expensive and less profitable, which could lead those customers to fabricate fewer semiconductors and to invest less in capital equipment such as our tools. In addition, if the PRC were to impose additional tariffs on raw materials, subsystems or other supplies that we source from the United States, our cost for those supplies would increase. As a result of any of the foregoing events, the imposition orof new or additional tariffs may limit our ability to manufacture tools, increase our selling and/or manufacturing costs, decrease margins, or inhibit our ability to sell tools or to purchase necessary equipment and supplies, which could have a material adverse effect on our business, results of operations, or financial conditions.

Changes in political and economic policies of the PRC government may materially and adversely affect our business, financial condition and results of operations and may result in our inability to sustain our growth and expansion strategies.

Substantially all of our operations are conducted in the PRC, and a substantial majority of our revenue is sourced from the PRC. Accordingly, our financial condition and results of operations are affected to a significant extent by economics,economic, political and legal developments in the PRC.

The Chinese economy differs from the economies of most developed countries in many respects, including the extent of government involvement, level of development, growth rate, and control of foreign exchange and allocation of resources. Although the PRC government has implemented measures emphasizing the utilization of market forces for economic reform, the reduction of state ownership of productive assets and the establishment of improved corporate governance in business enterprises, a substantial portion of productive assets in the PRC are still owned by the government. In addition, the PRC government continues to play a significant role in regulating industry development by imposing industrial policies. The PRC government also exercises significant control over economic growth in the PRC by allocating resources, controlling payment of foreign currency-denominated obligations, setting monetary policy, regulating financial services and institutions, and providing preferential treatment to particular industries or companies.

While the PRC economy has experienced significant growth in the past three decades, growth has been uneven, both geographically and among various sectors of the economy. The PRC government has implemented various measures to encourage economic growth and guide the allocation of resources. Some of these measures may benefit the overall PRC economy, but may also have a negative effect on us. Our financial condition and results of operation could be materially and adversely affected by government control over capital investments or changes in tax regulations that are applicable to us. In the past the PRC government has implemented measures to control the pace of economic growth, and similar measures in the future may cause decreased economic activity, which in turn could lead to a reduction in demand for our products and consequently have a material adverse effect on our businesses, financial condition and results of operations.

Changes in political and economic policies with respect to the PRC may make it difficult for us to release the benefit of our investments.

On November 12, 2020, then-Presidentthen-U.S. President Trump issued an executive order, or the Order, establishing a new sanctions program designed to prohibit U.S. persons from entering into transactions in certain publicly traded securities, as well as derivatives and securities designed to provide investment exposure to such securities, of any “Communist Chinese military company,” or CCMC, as designated by the U.S. Department of Defense, or DOD, or the U.S. Secretary of the Treasury. Continued ownership of such securities by U.S. persons would be prohibited after a one-year divestment period from the time of designation of the issuer. A number of PRC issuers have been designated under this program and more could be added.

On December 3, 2020, SMIC was designated as a CCMC by the DOD. Consequently, ACM Shanghai could be required to divest its ownershipDOD, which was subsequently removed as of SMIC shares prior to DecemberJune 3, 2021. If ACM Shanghai is not able to sell its shares of SMIC prior tohad remained on the list at December 3, 2020,2021, ACM Shanghai’s continued possession of SMIC securities may subjectcould have subjected ACM Shanghai and ACM Research to penalties. Certain implementation matters related to the scope of, and compliance with, the Order have not yet been resolved, and the ultimate application and enforcement of the Order may change due to, among other things, the change in the U.S. Presidential administration.

In addition, SMIC may be designated as a CCMC in the future, or we may seek to conduct business transactions with SMIC and other entities on the CCMC list in the future. Although the Order does not prohibit commercial relations with CCMC companies other than the securities transactions noted above, certain other export restrictions have been imposed under the Export Administration Regulations on some CCMC companies, including SMIC.companies. These and any similar future U.S. government restrictions on our suppliers or customers may adversely affect our business operations in the PRC, overall company results or our financial condition.

Certain of our investments may be subject to review by and approval from CFIUS, which may prevent us from taking advantage of investment opportunities that would otherwise be advantageous to our stockholders.

Certain of our investments may be subject to review by and approval from the U.S. Committee on Foreign Investment in the U.S., or CFIUS. In the event that CFIUS reviews one or more of the our investments, there can be no assurances that we will be able to maintain or proceed with such investments on terms acceptable to us. Additionally, CFIUS may seek to impose limitations on one or more such investments that may prevent us from maintaining or pursuing investment opportunities that we otherwise would have maintained or pursued, which could adversely affect the performance of our investments and thus our overall performance. Certain of our stockholders may be non-U.S. investors, and in the aggregate, may comprise a substantial portion of our net asset value, which may increase the risks of such limitations being imposed in connection with investments pursued or made by us. Legislative and regulatory changes, including changes to agency practice, in the future may negatively impact our ability to realize value from certain existing and future investments, including by limiting exit opportunities or causing us to favor buyers that we believe are less likely to require CFIUS review, even in circumstances where other buyers may offer better terms or more consideration.

We are subject to government regulation, including import, export, economic sanctions, and anti-corruption laws and regulations, that may limit our sales opportunities, expose us to liability and increase our costs.

Our products are subject to import and export controls in jurisdictions in which we distribute or sell our products. Import and exports controlexport controls and economic sanctions laws and regulations include restrictions and prohibitions on the sale or supply of certain products and on our transfer of parts, components, and related technical information and know-how to certain countries, regions, governments, persons and entities.

Various countries regulate the importation of certain products through import permitting and licensing requirements and have enacted laws that could limit our ability to distribute our products. The exportation, re-exportation, transfers within foreign countries and importation of our products, including by our partners, must comply with these laws and regulations, and any violations may result in reputational harm, government investigations and penalties, andor a denial or curtailment of exporting.exporting privileges. Complying with export control and sanctions laws for a particular sale may be time consuming, may increase our costs, and may result in the delay or loss of sales opportunities. If we are found to be in violation of U.S. sanctions or export control laws, or similar laws in other jurisdictions, we and the individuals working for us could incur substantial fines and penalties. Changes in export, sanctions or import laws or regulations may delay the introduction and sale of our products in international markets, require us to spendexpend resources to seek necessary government authorizations or to develop different versions of our products, or, in some cases, prevent the export or import of our products to certain countries, regions, governments, persons or entities, which could adversely affect our business, financial condition and operating results.

We cannot assure you that even if the STAR Listing and the STAR IPO are completed, we will realize any or all of our anticipated benefits of the STAR Listing and the STAR IPO. Our completion of the STAR Listing and the STAR IPO, which may not have the anticipated effects of including the strengthening of our market position and operations in the PRC. If the STAR Listing and the STAR IPO are completed, ACM Shanghai willcontinues to have broad discretion in the use of the proceeds from the initial sales of shares to investors and the proceeds from the STAR IPO, and it may not spend or invest those proceeds in a manner that results in our operating success or with which ACM Research stockholders agree. Our failure to successfully leverage the completion of the STAR Listing and the STAR IPO to expand our PRC business could result in a decrease in the price of the Class A common stock, and we cannot assure you that the success of ACM Shanghai will have a an attendant positive effect on the price of the Class A common stock.

PRC companies are critical to the STAR Listingglobal semiconductor industry, and our current business is substantially concentrated in the STAR IPO may not occur until 2022PRC market. Our inability to build, or later. In the interim, ACM Shanghai may require additional funding from ACM Researchany delay in order to proceed to augment its PRCgrowing, our PRC-based operations would materially and adversely limit our operations and we cannot give any assurance that such capital will be available from ACM Research at all in terms acceptable to us. Any such inability to obtain funds from ACM Research or other sources may impair the ability of ACM Shanghai to grow its operations, which could have a material adverse effect on our consolidated operating results, and on the price of the Class A common stock.including our revenue growth.

ACM Shanghai’s status as a publicly traded company that is controlled, but less than wholly owned, by ACM Research could have an adverse effect on us.

In November 2021, we completed the STAR Listing and STAR IPO with respect to shares of ACM Shanghai. ACM Shanghai is our principal operating company and, prior to the STAR Listing process, was a wholly owned subsidiary of ACM Research. As the result of actions being taken in connection with the STAR Listing and the STAR IPO, ACM Shanghai willis no longer be a wholly owned subsidiary of ACM Research, and the interests of ACM Shanghai may diverge from the interests of ACM Research and its other subsidiaries in the future. We may face conflicts of interest in managing, financing or engaging in transactions with ACM Shanghai, or allocating business opportunities between our subsidiaries, including future arrangements for operating subsidiaries other than ACM Shanghai to license and use our intellectual property. Substantially all of our intellectual property has been developed in the PRC and is owned by ACM Shanghai. As we expand our global operations through operating subsidiaries outside of the PRC, those operating subsidiaries may need to license intellectual property from ACM Shanghai in order to operate, and there can be no assurance that conflicts of interest will not preclude those operating subsidiaries from licensing the required intellectual property from ACM Shanghai on reasonable terms or at all.

ACM Research will retainretains majority ownership of ACM Shanghai aftersince the STAR IPO, but ACM Shanghai will beis managed by a separate board of directors and officers and those directors and officers will owe fiduciary duties to the various stakeholders of ACM Shanghai, including shareholders other than ACM Research. In the operation of ACM Shanghai’s business, there may be situations that arise whereby the directors and officers of ACM Shanghai, in the exercise of their fiduciary duties, take actions that may be contrary to the best interests of ACM Research.

In the future, ACM Shanghai may issue options, restricted shares and other forms of share-based compensation to its directors, officers and employees, which could dilute ACM Research’s ownership in ACM Shanghai. In addition, ACM Shanghai may engage in capital raising activities in the future that could further dilute ACM Research’s ownership interest.

Differing disclosures could lead to confusion or uncertainty among investors in the publicly traded shares of one or both companies. Differences between the price of ACM Shanghai shares on the STAR Market and the price of ACM Research Class A common stock on Nasdaq could lead to increased volatility, as some investors seek to arbitrage price differences. Moreover, such volatility could be exacerbated by the fact that ACM Shanghai shares currently represent substantially all of the assets of ACM Research.

Our success depends on our ability to protect our intellectual property, including our SAPS, TEBO, Tahoe, SFPECP, furnace and ECPother technologies.

Our commercial success depends in part on our ability to obtain and maintain patent and trade secret protection for our intellectual property, including our SAPS, TEBO, Tahoe, SFPECP, furnace and ECPother technologies and the design of our Ultra C equipment, as well as our ability to operate without infringing upon the proprietary rights of others. There can be no assurance that our patent applications will result in additional patents being issued or that issued patents will afford sufficient protection against competitors with similar technology, nor can there be any assurance that the patents issued will not be infringed, designed around, or invalidated by third parties. Even issued patents may later be found unenforceable or may be modified or revoked in proceedings instituted by third parties before various patent offices or in courts. The degree of future protection for our intellectual property is uncertain. Only limited protection may be available and may not adequately protect our rights or permit us to gain or keep any competitive advantage. This failure to properly protect the intellectual property rights relating to our products and technologies could have a material adverse effect on our financial condition and results of operations.

The patent application process is subject to numerous risks and uncertainties, and there can be no assurance that we or any of our future development partners will be successful in protecting our product candidates by obtaining and defending patents. These risks and uncertainties include the following:

In addition, we rely on the protection of our trade secrets and know-how. Although we have taken steps to protect our trade secrets and unpatented know-how, including entering into confidentiality and non-disclosure agreements with third parties and confidential information and inventions agreements with key employees, customers and suppliers, other parties may still obtain this information or may come upon this information independently. If any of these events occurs or if we otherwise lose protection for our trade secrets or proprietary know-how, the value of this information may be greatly reduced.

We may be involved in lawsuits to protect or enforce our patents, which could be expensive, time consuming and unsuccessful.

Competitors may infringe upon our patents. If our technologies are adopted, we believe that competitors may try to match our technologies and tools in order to compete. To counter infringement or unauthorized use, we may be required to file infringement claims, which can be expensive and time consuming. An adverse result in any litigation or defense proceedings, including our current suits, could put one or more of our patents at risk of being invalidated, found to be unenforceable or interpreted narrowly and could put our patent applications at risk of not issuing. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during litigation. In addition, any future patent litigation, interference or other administrative proceedings will result in additional expense and distraction of our personnel. Most of our competitors are larger than we are and have substantially greater resources, and they therefore are likely to be able to sustain the costs of complex patent litigation longer than we could. An adverse outcome in such litigation or proceedings may expose us to loss of our proprietary position.

We may not be able to protect our intellectual property rights throughout the world, including the PRC, which could materially, negatively affect our business.

Filing, prosecuting and defending patents on our products or proprietary technologies in all countries throughout the world would be prohibitively expensive, and our intellectual property rights in some countries outside the United States, including the PRC, can be less extensive than those in the United States. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent as federal and state laws in the United States. Consequently, competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and may export otherwise infringing products to territories where we have patent protection but enforcement is not as strong as that in the United States. These products may compete with our products, and our patents or other intellectual property rights may not be effective or sufficient to prevent them from competing.

The significant majority of our intellectual property has been developed in the PRC and is owned by ACM Shanghai. Implementation and enforcement of intellectual property-related laws in the PRC has historically been lacking due primarily to ambiguities in PRC intellectual property law. Accordingly, protection of intellectual property and proprietary rights in the PRC may not be as effective as in the United States or other countries. As a result, third parties could illegally use the technologies and proprietary processes that we have developed and compete with us, which could negatively affect any competitive advantage we enjoy, dilute our brand and harm our operating results. Litigation may be necessary to enforce our intellectual property rights, and given the relative unpredictability of the PRC’s legal system and potential difficulties enforcing a court judgment in the PRC, there is no guarantee litigation would result in an outcome favorable to us.

Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents and other intellectual property protection, which could make it difficult for us to stop the infringement of our patents or marketing of competing products in violation of our proprietary rights generally. Proceedings to enforce our patent rights in foreign jurisdictions could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not issuing, and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate, and the damages or other remedies awarded, if any, may not be commercially meaningful. Accordingly, our efforts to enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we develop or license and may adversely affect our business.

If we are sued for infringing intellectual property rights of third parties, it will be costly and time consuming, and an unfavorable outcome in that litigation could have a material adverse effect on our business.

Our success depends on our ability to develop, manufacture, market and sell our products without infringing upon the proprietary rights of third parties. Numerous U.S. and foreign-issued patents and pending patent applications owned by third parties exist in the fields in which we are developing products, some of which may contain claims that overlap with the subject matter of our intellectual property. A third party has claimed in the past, and others may claim in the future, that our technology or products infringe their intellectual property. In some instances third parties may initiate litigation against us in an effort to prevent us from using our technology in alleged violation of their intellectual property rights. The risk of such a lawsuit will likely increase as our size and the number and scope of our products increase and as our geographic presence and market share expand.

Any potential intellectual property claims or litigation commenced against us could:

Because patent applications can take many years to issue, there may be currently pending applications, unknown to us, that may later result in issued patents upon which our products or technologies may infringe. Similarly, there may be issued patents relevant to our products of which we are not aware.

Breaches of our cybersecurity systems could degrade our ability to conduct our business operations and deliver products to our customers, result in data losses and the theft of our intellectual property, damage our reputation, and require us to incur significant additional costs to maintain the security of our networks and data.

We increasingly depend upon our information technology systems to conduct our business operations, ranging from our internal operations and product development and manufacturing activities to our marketing and sales efforts and communications with our customers and business partners. Computer programmers may attempt to penetrate our network security, or that of our website, and misappropriate our proprietary information or cause interruptions of our service. Because the techniques used by such computer programmers to access or sabotage networks change frequently and may not be recognized until launched against a target, we may be unable to anticipate these techniques. We have also outsourced a number of our business functions to third-party contractors, including our manufacturers, and our business operations also depend, in part, on the success of our contractors’ own cybersecurity measures. Additionally, we face potential heightened cybersecurity risks during the COVID-19 pandemic as our level of dependence on our IT networks and related systems increases, stemming from employees working remotely, and the number of malware campaigns and phishing attacks preying on the uncertainties surrounding the COVID‑19 pandemic increases. These heightened cybersecurity risks may increase our vulnerability to cyber-attacks and cause disruptions to our internal control procedures. Accordingly, if our cybersecurity systems and those of our contractors fail to protect against unauthorized access, sophisticated cyberattacks and the mishandling of data by our employees and contractors, our ability to conduct our business effectively could be damaged in a number of ways, including sensitive data regarding our employees or business, including intellectual property and other proprietary data, could be stolen. Should this occur, we could be subject to significant claims for liability from our customers and regulatory actions from governmental agencies. In addition, our ability to protect our intellectual property rights could be compromised and our reputation and competitive position could be significantly harmed. Consequently, our financial performance and results of operations could be adversely affected.

Substantially all of our operations, as well as significant operations of a number of our key customers, are located in areas of the PRC impacted by the COVID‑19 outbreak,pandemic, and thoseour operations have been, and may continue to be, adversely affected by the effects of PRC restrictions imposed as the result of COVID‑19 outbreak.19.

We conduct substantially all of our product development, manufacturing, support and services in the PRC, and those activities have been directly impacted by the COVID‑19 outbreakCOVID-19 and related restrictions on transportation and public appearances. In February 2020March 2022 several regions in China began to experience elevated levels of COVID-19 infections, and the PRC government instituted policies to restrict the spread of the virus, which are referred to as zero-COVID policies. The policies began with an increase of “spot quarantines,” under which a positive polymerase chain reaction, or PCR, or other tests would result in the quarantining of individual buildings, groups of buildings, or even full neighborhoods. The policies were later expanded to full-city restrictions, including in the City of Shanghai, where substantially all of our operations are located. COVID-19 related restrictions in Shanghai began to limit employee access to, and logistics activities of, our offices and production facilities in the Pudong district of Shanghai during in the first quarter of 2022, and therefore limited our ability to ship finished products to customers and to produce new products. Spot quarantines in mid-March 2022 began to impact a number of our employees and led to a closure of our administrative and R&D offices in Zhangjiang in the Pudong district. A subsequent restriction that encompassed the entire Pudong region of Shanghai was imposed in late March 2022 and impacted the operation of our Chuansha production facility.

In addition, in December 2022, the PRC government relaxed its zero-COVID policies, which resulted in large scale COVID-19 infections throughout China, including Shanghai. A significant number of ACM Shanghai headquartersemployees were closedalso infected, and in many cases missed work for an additional six days beyond the normal Lunar New Year Holidayone or several weeks, which caused administrative and operational challenges in accordance with Shanghai government restrictions related to the outbreak.late 2022 and early 2023. We cannot assure you that furtherillnesses of ACM Shanghai employees, or of its customers, suppliers or other third parties, may not result in closures, or reductions of our PRC operations or production, may not be necessaryor additional administrative inefficiencies in the upcoming months asor quarters.

As the result of COVID-19 related restrictions in Shanghai, ACM Research’s indirect subsidiary ACM Shengwei may be unable to achieve certain performance milestones required by its Grant Contract for State-owned Construction Land Use Right in Shanghai City, and our liquidity, financial position and business interruptions arising from protective measures being taken bywould be adversely affected if ACM Shengwei is subject to penalties or loses its rights to the PRC and other governmental agencies or of other consequencesuse of the COVID‑19 outbreak.granted land and any partially completed facilities on the land.

Our corporate headquarters are locatedIn 2020 ACM Shanghai, through its wholly-owned subsidiary ACM Shengwei, entered into a Grant Contract for State-owned Construction Land Use Right in San Mateo CountyShanghai City (Category of R&D Headquarters and Industrial Projects), or the Grant Agreement, with the China (Shanghai) Pilot Free Trade Zone Lin-gang Special Area Administration, or the Grantor, in connection with ACM Shengwei’s obtaining of rights to use approximately 43,000 square meters (10.6 acres) of land in the San Francisco Bay Area. Lingang Heavy Equipment Industrial Zone of Lin-gang Special Area of China (Shanghai) Pilot Free Trade Zone, or the Land Use Right, for a period of fifty years, commencing on the date of delivery of the land in July 2020, or the Delivery Date.

In orderconnection with the Land Use Right, ACM Shengwei paid a performance deposit of RMB 12.3 million ($1.9 million) to attempt to mitigate the COVID-19 pandemic, in March 2020secure its achievement of certain milestones, consisting of: (a) the Statestart of California declared a stateconstruction within 6 months after the Delivery Date (60% of emergency related to the spread of COVID‑19,performance deposit); (b) the San Francisco Departmentcompletion of Public Health announced aggressive recommendations to reduceconstruction within 30 months after the spreadDelivery Date (20% of the disease,performance deposit), or Construction Completion Milestone; and (c) the health officersstart of six San Francisco Bay Area counties, including San Mateo County, issued shelter-in-place orders, which (i) direct all individuals living in those counties to shelter at their places of residence (subject to limited exceptions), (ii) direct all businesses and governmental agencies to cease non-essential operations at physical locations in those counties, (iii) prohibit all non-essential gatherings of any number of individuals, and (iv) order cessation of all non-essential travel, and (d)production within 42 months after the Governor of California and the State Public Health Officer and DirectorDelivery Date (20% of the California Department of Public Health ordered all individuals living inperformance deposit), or Production Start Milestone. If the State of California to stay at their place of residence for an indefinite period of time (subject to limited exceptions). The effects of these types of actions in the future may negatively impact productivity, disrupt our business and delay timelines, the magnitude of which will depend, in part, on the length and severityachievement of the restrictionsConstruction Completion Milestone or the Production Start Milestone is delayed or abandoned, ACM Shengwei may be subject to penalties and other limitationsmay lose its rights to both the use of the granted land and any partially completed facilities on our ability to conduct our business in the ordinary course.that land.

Class A common stock only commenced trading on the Nasdaq Global Market, or Nasdaq, on November 3, 2017, and theThe market price of Class A common stock has been, and could continue to be, subject to significant fluctuations. The market price of Class A common stock may fluctuate significantly in response to numerous factors, many of which are beyond our control, including:

In recent years, the stock market in general, and Nasdaq in particular, has experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to changes in the operating performance of the companies whose stock is experiencing those price and volume fluctuations.

No companyFew if any companies with stock publicly traded in the United States hashave effected a STAR Market listing of stock of a PRC-based subsidiary, and it is therefore difficult to predict the effect of the proposed STAR Listing and STAR IPO on the Class A common stock.

The China Securities Regulatory Commission initially launched the STAR Market in June 2019 and trading on the Market began in July 2019. In November 2021 ACM Shanghai completed the STAR Listing and the STAR IPO. We believe we are one of the first publicly traded U.S. companycompanies to proposecomplete an initial public offering of shares of a PRC subsidiary on the STAR Market. As a result, no assurance can be given regarding the effect of the STAR Listing and the STAR IPO on the market price of the Class A common stock. The market price of Class A common stock may be volatile or may decline, for reasons other than the risk and uncertainties described above, as the result of investor negativity or uncertainty with respect to the impact of the proposed STAR Listing and STAR IPO.

ACM Research stockholders were not entitled to purchase ACM Shanghai shares in the pre-STAR Listing placement, and they may have limited opportunities to purchase ACM Shanghai shares even ifnow that the STAR Listing and the STAR IPO arehave been completed. Investors may elect to invest in our business and operations by purchasing ACM Shanghai shares in the STAR IPO or on the STAR Market rather than purchasing ACM Research Class A common stock, and that reduction in demand could lead to a decrease in the market price for the Class A common stock.

If securities or industry analysts do not publish research or reports about us, our business or our market, or if they publish negative evaluations of Class A common stock or the stock of other companies in our industry, the price of our stock and trading volume could decline.

The trading market for Class A common stock will depend in part on the research and reports that securities or industry analysts publish about us or our business. If one or more of the analysts who cover us downgrade the Class A common stock or publish inaccurate or unfavorable research about our business, the Class A common stock price would likely decline. In addition, if one or more of these analysts ceases coverage of the Class A common stock or fails to publish reports about the Class A common stock on a regular basis, we could lose visibility in the financial markets, which in turn could cause the Class A common stock price or trading volume to decline.

We have never paid and do not intend to pay cash dividends and, consequently, your ability to achieve a return on your investment will depend on appreciation in the price of Class A common stock.

We have never declared or paid cash dividends on our capital stock. We intend to retain any future earnings to finance the operation and expansion of our business, and we do not expect to declare or pay any dividends in the foreseeable future. Accordingly, you may only receive a return on your investment in Class A common stock if the market price of Class A common stock increases.

Our ability to pay dividends on Class A common stock depends significantly on our receiving distributions of funds from our subsidiaries in the PRC. PRC statutory laws and regulations permit payments of dividends by those subsidiaries only out of their retained earnings, which are determined in accordance with PRC accounting standards and regulations that differ from U.S. generally accepted accounting principles. The PRC regulations and our subsidiaries’ articles of association require annual appropriations of 10% of net after-tax profits to be set aside, prior to payment of dividends, as a reserve or surplus fund, which restricts our subsidiaries’ ability to transfer a portion of their net assets to us. In addition, our subsidiaries’ short-term bank loans restrict their ability to pay dividends to us.

The dual class structure of Class A common stock has the effect of concentrating voting control with our executive officers and directors, including our Chief Executive Officer and President, which will limit or preclude your ability to influence corporate matters.

Because of the market capitalization achieved by Class A common stock during October 2020, our charter no longer contemplates circumstances in which all of the shares of Class B common stock will mandatorily convert into Class A common stock. Instead, all of the Class B common stock generally will convert into Class A common stock only upon the election of the holders of a majority of the then-outstanding shares of Class B common stock, and specific shares of Class B common stock will convert into Class A common stock upon future transfers by the holders of those shares. The potential conversion of Class B common stock to Class A common stock will have the effect, over time, of increasing the relative voting power of those holders of Class B common stock who retain their shares in the long term.

Delaware law and provisions in our charter and bylaws could make a merger, tender offer or proxy contest difficult, thereby depressing the trading price of Class A common stock.

Our status as a Delaware corporation and the anti-takeover provisions of the Delaware General Corporation Law may discourage, delay, or prevent a change in control by prohibiting us from engaging in a business combination with an interested stockholder for a period of three years after the person becomes an interested stockholder, even if a change of control would be beneficial to our existing stockholders. Our charter and bylaws contain provisions that may make the acquisition of our company more difficult, including the following:

As a Delaware corporation, we are also subject to provisions of Delaware law, including Section 203 of the Delaware General Corporation Law, which limits the ability of stockholders holding more than 15% of our outstanding voting stock from engaging in certain business combinations with us. Any provision of our charter or bylaws or Delaware law that has the effect of delaying or deterring a change in control could limit the opportunity for our stockholders to receive a premium for their shares of Class A common stock, and could also affect the price that some investors are willing to pay for Class A common stock.

Our charter provides that the Court of Chancery of the State of Delaware will, to the fullest extent permitted by law, be the sole and exclusive forum for:

By becoming a stockholder in our company, you will be deemed to have notice of and have consented to the provisions of our charter related to choice of forum. The choice of forum provision in our charter may limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us or any of our directors, officers, other employees, agents or stockholders, which may discourage lawsuits with respect to such claims. Alternatively, if a court were to find the choice of forum provision contained in our charter to be inapplicable or unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could harm our business, results of operations and financial condition.

As a public company, and particularly after we cease to be an “emerging growth company,” effective as of December 31, 2020, we will continue to incur significant legal, accounting and other expenses. We are subject to the reporting requirements of the Securities and Exchange Act, the Sarbanes-Oxley Act, the Dodd-Frank Wall Street Reform and Consumer Protection Act, and the rules and regulations of Nasdaq. These requirements have increased and will continue to increase our legal, accounting and financial compliance costs and have made and will continue to make some activities more time consuming and costly. For example, we expect these rules and regulations to make it more difficult and more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to maintain the same or similar coverage. As a result, it may be more difficult for us to attract and retain qualified individuals to serve as our executive officers or on the board of directors, particularly to serve on the audit and compensation committees.

In addition, changing laws, regulations and standards relating to corporate governance and public disclosure are creating uncertainty for public companies, increasing legal and financial compliance costs and making some activities more time consuming. These laws, regulations and standards are subject to varying interpretations, in many cases due to their lack of specificity, and, as a result, their application in practice may evolve over time as new guidance is provided by regulatory and governing bodies. This could result in continuing uncertainty regarding compliance matters and higher costs necessitated by ongoing revisions to disclosure and governance practices. We intend to invest resources to comply with evolving laws, regulations and standards, and this investment may result in increased general and administrative expense and a diversion of management’s time and attention from revenue-generating activities to compliance activities. If our efforts to comply with new laws, regulations and standards differ from the activities intended by regulatory or governing bodies, regulatory authorities may initiate legal proceedings against us and our business may be harmed.

Short sellers of our stock may be manipulative and may drive down the market price of our Class A common stock.

Short selling is the practice of selling securities that a seller does not own but rather has borrowed, or intends to borrow, from a third party with the intention of buying identical securities at a later date to return to the lender. A short seller hopes to profit from a decline in the value of the securities between the sale of the borrowed securities and the purchase of the replacement shares, as the short seller expects to pay less in that purchase than it received in the sale. As it is in the short seller’s interest for the price of the stock to decline, some short sellers publish, or arrange for the publication of, opinions or characterizations regarding the relevant issuer, its business prospects and similar matters calculated to or which may create negative market momentum, which may permit them to obtain profits for themselves as a result of selling the securities short. The use of the Internet, social media, and blogging have allowed short sellers to publicly attack a company’s credibility, strategy and veracity by means of so-called “research reports” that mimic the type of investment analysis performed by legitimate securities research analysts. Issuers with limited trading volumes or substantial retail stockholder bases can be particularly susceptible to higher volatility levels, and can be particularly vulnerable to such short attacks.

Short seller publications are not regulated by any governmental or self-regulatory organization or any other official authority in the United States and are not subject to the certification requirements imposed by the SEC in Regulation Analyst Certification. Accordingly, the opinions they express may be based on distortions of actual facts or, in some cases, outright fabrications. In light of the limited risks involved in publishing such information, and the significant profits that can be made from running successful short attacks, short sellers will likely continue to issue such reports. Short-seller publications may create the appearance or perception of wrongdoing, even when they are not substantiated, and may therefore affect the reputation or perception of our company and management.

While we intend to strongly defend our public filings against any such short seller attacks, in many situations we could be constrained, for example, by principles of freedom of speech, applicable state law or issues of commercial confidentiality, in the manner in which we are able to proceed against the relevant short seller.

Such short-seller attacks have caused, and may cause in the future, temporary or possibly long term, declines in the market price of Class A common stock and possible litigation initiated against us. During the quarter ended December 31, 2020, such a short-seller publication was issued with respect to our company and certain members of the management team, and has been referenced by the plaintiffs in the litigation described in “Item 3.  Legal Proceedings.”

Our production facilities could be damaged or disrupted by a natural disaster, war, terrorist attacks or other catastrophic events.

Our manufacturing facilities are subject to risks associated with natural disasters, such as earthquakes, fires, floods tsunami, typhoons and volcanic activity, environmental disasters, health epidemics, and other events beyond our control such as power loss, telecommunications failures, and uncertainties arising out of armed conflicts or terrorist attacks. The frequency and intensity of severe weather events are reportedly increasing throughout the world as part of broader climate changes. Global weather pattern changes may pose long-term risks of physical impacts to our business. A substantial majority of our facilities as well as our research and development personnel are located in the PRC. Any catastrophic loss or significant damage to any of our facilities would likely disrupt our operations, delay production, and adversely affect our product development schedules, shipments and revenue. In addition, any such catastrophic loss or significant damage could result in significant expense to repair or replace the facility and could significantly curtail our research and development efforts in a particular product area or primary market, which could have a material adverse effect on our operations and operating results.

We have occupied our current corporate headquarters in Fremont, California, since February 2008, under a lease that, after an amendment in February 2021, now extends through March 31, 2023.

We conduct research and development, and service support operations and a portion of our manufacturing at ACM Shanghai’s headquarters. This facility consists of 60,000 square feet, of which 36,000 square feet are allocated for manufacturing, and isheadquarters located in the Zhangjiang Hi Tech Park in Shanghai. We have leased this facility since 2007 and our lease currently extends until January 1, 2022.December 31, 2024.

In January 2018, ACM Shanghai entered into an operating lease for a second manufacturing space located in Shanghai, ten miles from its headquarters. The lease covers a total of 103,318 square feet, of which 100,000 square feet are allocated for production. Our lease currently extends until January 15, 2028.

In February 2021, ACM Shanghai entered into an operating lease for a second building located adjacent to the above-mentioned second manufacturing space to provide additional manufacturing space.  The lease term expires on Januarycovers approximately 106,076 square feet of which 100,000 square feet are allocated for production.  Our lease currently extends until July 15, 2022.2024. In July 2022, ACM Shanghai entered into an operating lease for a third building to provide additional manufacturing and warehousing space.

In addition, we provide sales support and customer service operations from leased office space in Jiangyin and Wuxi in the PRC and Icheon in South Korea.

In May 2020 ACM Shanghai, through its wholly owned subsidiary Shengwei Research (Shanghai), Inc. orACM Shengwei, entered into an agreement for a 50-year land use right in the Lingang region of Shanghai. In July 2020 ACM Shengwei began a multi-year construction project for a new development and production center, with the objective of commencing production at the new facility in late 2022.2023. The planned 1,000,000 square foot facility will incorporate state-of-the-art manufacturing systems and automation technologies and will provide the floor space to support significantly more production capacity and related research and development activities when fully-staffedfully staffed and supplied.

In connection with the Lingang facility project, on October 28, 2020, a wholly owned subsidiary of ACM Shengwei entered into Shanghai Public Rental Housing Overall Pre-Sale Contracts with Shanghai Lingang Industrial Zone Public Rental Housing Construction and Operation Management Co., Ltd. for an aggregate price to us of approximately $40 million. Under these contracts,ACM Shengwei’s subsidiary will receivereceived ownership of the apartment units and corresponding land use rights before October 31, 2021in January 2022 as part of a pilot project of public rental housing in the “rent before sale” park in the Lingang Industrial Zone. The contracts stipulate that, for a ten-year term, ACM Shengwei’s subsidiary will beis obligated to manage the apartment units for public rental use in accordance with public rental housing standards and must rent the apartment units to employees of ACM Shanghai and its subsidiaries who work in the Lingang Industrial Zone. After that ten-year period expires, ACM Shengwei’s subsidiary may use the apartment units as stock of commercial housing and may sell them separately in sets.