UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, DC 20549
FORM 10-K
(Mark One) 
x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
  For the fiscal year ended ended:
December 31, 20172019
or
o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934


Commission File No. 000-54799
HYSTER-YALE MATERIALS HANDLING, INC.
(Exact name of registrant as specified in its charter)
Delaware
31-1637659
(State or other jurisdiction of incorporation or organization) 
31-1637659
(I.R.S. Employer Identification No.)
5875 Landerbrook Drive
Suite 300
Cleveland 44124-4069
5875 Landerbrook Drive, Suite 300, Cleveland, Ohio
OH
(Zip code)
(Address of principal executive offices)
44124-4069
(Zip Code)
Registrant's telephone number, including area code: (440) (440449-9600
Securities registered pursuant to Section 12(b) of the Act:
Title of each classTrading Symbol(s)Name of each exchange on which registered
Class A Common Stock, Par Value $0.01 Per ShareHYNew York Stock Exchange


Securities registered pursuant to Section 12(g) of the Act:
Class B Common Stock, Par Value $0.01 Per Share
(Title of class)


Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.         YES x    NO oYesNo
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.     YES oNOxYes No
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    YESx    NO oYes    No 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    YESx     NO o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405) is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. oYes     No 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and "emerging growth company" in Rule 12b-2 of the Exchange Act.
Large accelerated filerþ
Accelerated filero
Non-accelerated filero
Smaller reporting companyo
Emerging growth companyo
(Do not check if a smaller reporting company)


If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o


Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act)        YES oNOxYes No
     
Aggregate market value of Class A Common Stock and Class B Common Stock held by non-affiliates as of June 30, 201728, 2019 (the last business day of the registrant's most recently completed second fiscal quarter): $783,867,203$596,861,602
Number of shares of Class A Common Stock outstanding at February 23, 2018: 12,566,71521, 2020: 12,809,626
Number of shares of Class B Common Stock outstanding at February 23, 2018: 3,899,00621, 2020: 3,862,383
DOCUMENTS INCORPORATED BY REFERENCE


Portions of the Company's Proxy Statement for its 20182020 annual meeting of stockholders are incorporated herein by reference in Part III of this Form 10-K.

     





HYSTER-YALE MATERIALS HANDLING, INC.
TABLE OF CONTENTS





PART I
Item 1. BUSINESS
General


Hyster-Yale Materials Handling, Inc. ("Hyster-Yale" or the "Company") and its subsidiaries, including its operating company Hyster-Yale Group, Inc. ("HYG"), is a leading, globally integrated, full-line lift truck manufacturer. The Company offers a broad array of solutions aimed at meeting the specific materials handling needs of its customers, including attachments and hydrogen fuel cell power products, telematics, automation and fleet management services, as well as a variety of other power options for its lift trucks. The Company, headquartered in Cleveland, Ohio, through HYG, designs, engineers, manufactures, sells and services a comprehensive line of lift trucks, attachments and aftermarket parts marketed globally primarily under the Hyster® and Yale® brand names, mainly to independent Hyster® and Yale® retail dealerships. Lift trucks and component parts are manufactured in the United States, China, Northern Ireland, Mexico, the Netherlands, Italy, Vietnam, the Philippines, Italy, Japan, BrazilVietnam and China.Brazil. Hyster-Yale was incorporated as a Delaware corporation in 1999.


The Company owns a 75% majority interest in Hyster-Yale Maximal Forklift (Zhejiang) Co., Ltd. ("Hyster-Yale Maximal"). Hyster-Yale Maximal is a Chinese manufacturer of low-intensity and standard lift trucks and specialized material handling equipment. Hyster-Yale Maximal also designs and produces specialized products in the port equipment and rough terrain forklift markets. The results of Hyster-Yale Maximal are included in the JAPIC segment since the date of acquisition.

The Company operates Bolzoni S.p.A. ("Bolzoni"). Bolzoni is a leading worldwide producer and distributor of attachments, forks and lift tables marketed under the Bolzoni Auramo®, Auramo® and Meyer® brand names. Bolzoni products are manufactured in the United States, Italy, China, Germany Finland and the United States.Finland. Through the design, production and distribution of a wide range of attachments, Bolzoni has a strong presence in the market niche of lift-truck attachments and industrial material handling.


In 2019, as part of a plan to expand Bolzoni's capabilities in the United States, Bolzoni's North America attachment manufacturing moved into HYG's Sulligent, Alabama manufacturing facility. As a result, effective January 1, 2019, the Sulligent facility became a Bolzoni facility. Accordingly, the results of the Sulligent facility in 2019 have been included in the Bolzoni segment and the historical results of operations of the Sulligent facility for 2018 and 2017 have been included in the Bolzoni segment within this Annual Report on Form 10-K.

The Company operates Nuvera Fuel Cells, LLC ("Nuvera"). Nuvera is an alternative-power technology company focused on fuel cellthe design, manufacture and sale of hydrogen fuel-cell stacks and engines. Nuvera also supports on-site hydrogen production and dispensing systems that are designed to deliver clean energy solutions to customers.  


The Company makes its annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and any amendments to those reports available, free of charge, through its website, www.hyster-yale.com, as soon as reasonably practicable after such material is electronically filed with, or furnished to, the Securities and Exchange Commission (“SEC”("SEC").

The components of the Company's revenues were as follows for the year ended December 31:
Business Segments

  2019 2018 2017
Lift trucks 75% 77% 77%
Parts 12% 13% 13%
Service, rental and other 8% 4% 5%
Bolzoni 5% 5% 5%
Nuvera less than 1%
 1% less than 1%
The Company operates five reportable segments: the Americas, EMEA, JAPIC, BolzoniSales of internal combustion engine lift trucks and Nuvera. See Note 3 to the consolidated financial statementselectric lift trucks were approximately 47% and approximately 28% of annual revenues in this Annual Report on Form 10-K for further discussion.2019, respectively.


Manufacturing and Assembly
The Company manufactures components, such as frames, masts and transmissions, and assembles lift trucks in the market of sale whenever practical to minimize freight cost and balance currency mix. In some instances, however, it utilizes one worldwide location to manufacture specific components or assemble specific lift trucks. Additionally, components and assembled lift trucks are exported when it is advantageous to meet demand in certain markets. The Company operates twelve lift truck manufacturing and assembly facilities worldwide with fivefour plants in the Americas, three in EMEA and fourfive in JAPIC, including joint venture operations. In addition, the Company operates sevensix Bolzoni manufacturing facilities worldwide.
Sales
During 2017, the Company’s retail shipments of lift trucks in North America by end market were approximately 23% to the food and beverage market, approximately 14% to the logistics market, approximately 14% to the natural resource and materials market, approximately 13% to the consumer and business trade market, approximately 13% to the manufacturing market, approximately 12% to the rental market and approximately 11% to the durable goods market.
Aftermarket Parts
The Company offers a line of aftermarket parts to service its large installed base of lift trucks currently in use in the industry. The Company offers online technical reference databases specifying the required aftermarket parts to service lift trucks and an aftermarket parts ordering system. Aftermarket parts sales represented approximately 13% of the Company’s annual revenues in each of 2017, 2016 and 2015.


The Company sells Hyster®- and Yale®-branded aftermarket parts to dealers for Hyster® and Yale® lift trucks. The Company also sells aftermarket parts under the UNISOURCE™ and PREMIER™ brands to Hyster® and Yale® dealers for the service of

competitor lift trucks. The Company has a contractual relationship with a third-party, multi-brand, aftermarket parts wholesaler in the Americas and EMEA whereby orders from the Company's dealers for parts for lift trucks are fulfilled by the third party who then pays the Company a commission.

Marketing
The Company’s marketing organization is structured in three regional divisions:divisions by industry focus: the Americas; EMEA, which includes Europe, the Middle East and Africa; and JAPIC, which includes Japan, Asia, Pacific, India and China. In each region, certain marketing support functions for the Hyster® and Yale® brands are carried out by shared-services teams. These activities include sales and service training, information systems support, product launch coordination, specialized sales material development, help desks, order entry, marketing strategy and field service support.

Patents, Trademarks and Licenses
The Company relies on a combination of trade secret protection, trademarks, copyrights, and patents to establish and protect the Company's proprietary rights. These intellectual property rights may not have commercial value or may not be sufficiently broad to protect the aspect of the Company's technology to which they relate or competitors may design around the patents. The Company is not materially dependent upon patents or patent protection; however, as materials handling equipment has become more technologically advanced, the Company and its competitors have increasingly sought patent protection for inventions incorporated into their respective products. The Company owns the Hyster®,Yale®, Maximal®, Bolzoni Auramo®, Auramo®, Meyer® and Nuvera® trademarks and believes these trademarks are material to its business.

Distribution Network
The Company distributes lift trucks and attachments primarily through two channels: independent dealers and a National Accounts program.direct sales program to major customers. In addition, the Company distributes aftermarket parts and service for its lift trucks through its independent dealers. The Company’s end-user base is diverse and fragmented, including, among others, light and heavy manufacturers, trucking and automotive companies, rental companies, building materials and paper suppliers, lumber, metal products, warehouses, retailers, food distributors, container handling companies and U.S. and non-U.S. governmental agencies.
Independent Dealers
The Company’s dealers, located in 129124 countries, are generally independently owned and operated. AsThe following table summarizes the Company's dealers as of December 31, 2017, Hyster® had 20 independent dealers and Yale® had 32 independent dealers in the Americas. Hyster® had 66 independent dealers and Yale® had 94 independent dealers in EMEA and Hyster® had 43 independent dealers and Yale® had 13 independent dealers in JAPIC. As of December 31, 2017, the Company had 26 dual-branded dealers in the Americas, four in EMEA and three in JAPIC.2019:
National
  
Hyster®
 
Yale®
 Dual-Branded 
Maximal®
Americas 14
 30
 27
 5
EMEA 69
 84
 3
 12
JAPIC 102
 8
 5
 73
Global Accounts
The Company operates a National Accountsdirect sales program to major customers for both Hyster® and Yale®. The National AccountsThis program focuses on large customers with centralized purchasing and geographically dispersed operations in multiple dealer territories. The National AccountsThis program accounted for 17%21%, 17%16% and 16%17% of new lift truck unit volume in 20172019, 20162018 and 20152017, respectively. The independent dealers support the National Accounts programthese major customers by providing aftermarket parts and service on a local basis. Dealers receive a commission for the support they provide in connection with National Accountsthese major customer sales and for the preparation and delivery of lift trucks to customer locations. In addition to selling new lift trucks, the National Accountsthis global accounts program markets services, including full maintenance leases and fleet management.

Financing of Sales
The Company is engaged in a joint venture with Wells Fargo Financial Leasing, Inc. (“WF”("WF") to provide dealer and customer financing of new lift trucks in the United States. The Company owns 20% of the joint venture entity, HYG Financial Services,

Inc. ("HYGFS"), and receives fees and remarketing profits under a joint venture agreement. ThisThe current agreement has a basean initial term of five yearsthrough December 2023 and automatically renews for additional one-year terms unless written notice is given by either party at least 180 days prior to termination. The expiration of the base term is December 2018. The Company accounts for its ownership of HYGFS using the equity method of accounting.
Under the joint venture agreement with HYGFS, the Company’s dealers and certain customers are extended credit for the purchase of lift trucks to be placed in the dealer’s floor plan inventory or the financing of lift trucks that are sold or leased to customers. For some of these arrangements, the Company provides recourse or repurchase obligations to HYGFS or to others. In substantially all of these transactions, a perfected security interest is maintained in the lift trucks financed, so that in the event of a default, the Company has the ability to take title to the assets financed and sell it through the Hyster® or Yale® dealer

network. Furthermore, the Company has established reserves for exposures under these agreements when required. In addition, the Company has an agreement with WF to limit its exposure to losses at certain eligible dealers. Under this agreement, losses related to guarantees for these certain eligible dealers are limited to 7.5% of their original loan balance. See Notes 1718 and 1819 to the Consolidated Financial Statements in this Annual Report on Form 10-K for further discussion.

Backlog
The following table outlines the Company's backlog of unfilled orders placed with its manufacturing and assembly operations for new lift trucks:
 December 31, 2017 September 30, 2017 December 31, 2016 December 31, 2019 September 30, 2019 December 31, 2018
Units (in thousands) 33.8
 35.1
 30.7
 41.2
 43.4
 43.9
Backlog, approximate sales value (in millions) $860
 $860
 $740
 $1,070
 $1,130
 $1,190
As of December 31, 2017,2019, the Company expects substantially all of its backlog of unfilled orders placed with its manufacturing and assembly operations for new lift trucks to be sold during fiscal 2018.2020. Backlog represents unfilled lift truck orders placed with the Company’s manufacturing and assembly facilities from dealers and National Accountdirect sales to customers. In general, unfilled orders may be canceled at any time prior to the time of sale; however, the Company can assess cancellation penalties on dealer orders within a certain period prior to initiating production. The dollar value of backlog is calculated using the current unit backlog and the forecasted average sales price per unit.

Key Suppliers and Raw Materials
At times, the Company has experienced significant increases in material costs, primarily as a result of global price increases in industrial metals, including steel, lead and copper and other commodity products, such as rubber, as a result of increased demand and limited supply. While the Company attempts to pass these increased costs along to its customers in the form of higher prices for its products, it may not be able to fully offset the increased costs of industrial metals and other commodities, due to overall market conditions and the lag time involved in implementing price increases for its products.
A significant raw material required by the Company's manufacturing operations is steel, which is generally purchased from steel producing companies in the geographic area near each of the Company's manufacturing facilities. Other significant components for the Company's lift trucks are engines, axles, brakes, transmissions, batteries and chargers. These components are available from numerous sources in quantities sufficient to meetIn addition, the Company's requirements. The Company depends on a limited number of suppliers for some of the Company's crucial components, including diesel and gasoline engines, which are supplied by, among others, Power Solutions International, Inc., Kubota Corp., and Cummins Inc., drive-system components, which are supplied by, among others, Dana Corporation and ZF Company, and cast-iron counterweights used to counter balance some lift trucks, which are obtained from, among others, North Vernon Industry Corp. and Eagle Quest International Ltd. Some of these critical components are imported and subject to regulations, such as customary inspection by the U.S. Customs and Border Protection under the auspices of the U.S. Department of Homeland Security, as well as the Company's own internal controls and security procedures. The Company believes comparable alternativesWhile most components are available from numerous sources or in quantities sufficient to meet requirements, the Company has experienced shortages of key components for all suppliers.certain products, particularly in 2019, which has affected production levels.

Competition
The Company is one of the leaders in the lift truck industry with respect to market share in the Americas and worldwide. Competition in the materials handling industry is intense and is based primarily on strength and quality of dealers,distribution, brand loyalty, customer service, new lift truck sales prices, availability of products and aftermarket parts, comprehensive product line offerings, product performance, product quality and features and the cost of ownership over the life of the lift truck. The Company competes with several global lift truck manufacturers that operate in all major markets, as well as other niche companies. The lift truck industry also competes with alternative methods of materials handling, including conveyor systems
Table of Contents

and automated guided vehicles and systems.
The Company's aftermarket parts offerings compete with parts manufactured by other lift truck manufacturers, as well as companies that focus solely on the sale of generic parts.


The use of fuel-cell technology in industrial and commercial applications is a relatively new development. Companies implementing such technology face competitors that integrate more traditional energy technologies into their product lines, as well as competitors that have implemented or are implementing alternatives to traditional energy technologies, such as lithium batteries, fuel additives and other high efficiency or “renewable” technologies.


Cyclical Nature of Lift Truck Business
The Company’s lift truck business historically has been cyclical. Fluctuations in the rate of orders for lift trucks, attachments and fuel-cell technology reflect the capital investment decisions of the Company’s customers, which depend to a certain extent on the general level of economic activity in the various industries the lift truck customers serve. During economic downturns, customers tend to delay new lift truck and parts purchases. Consequently, the Company has experienced, and in the future may continue to experience, significant fluctuations in its revenues and net income.

Research and Development
The Company’s lift truck research and development capability is organized around four major engineering centers, allthat are coordinated on a global basis by the Company’s global executive administrative center.basis. Products are designed for each brand concurrently and generally each center is focused on the global requirements for a single product line. The Company’s counterbalanced development center, which has global design responsibility for several classes of lift trucks for a highly diverse customer base, is located in Fairview, Oregon. The Company’s big truck development center is located in Nijmegen, the Netherlands, adjacent to a dedicated global big truck assembly facility. Big trucks are primarily used in handling shipping containers and other specialized heavy lifting applications, including steel, concrete and energy-related industries. Warehouse trucks, which are primarily used in distribution applications, are designed based on regional differences in stacking and storage practices. The Company designs warehouse equipment for sale in the Americas market in Greenville, North Carolina, adjacent to the Americas manufacturing and assembly facility. The Company designs warehouse equipment for the European market in Masate, Italy, adjacent to its manufacturing and assembly facility for warehouse equipment. The Company also has an engineering Concept Center in the United Kingdom to support advanced design activities and an engineering office in India to support its global design activities for its four major engineering centers.
The Company’s lift truck engineering centers utilize a three-dimensional CAD/CAM system and are interconnected, with each of the Company’s manufacturing and assembly facilities and certain suppliers. This allows for collaboration in technical engineering designs and collaboration with these suppliers. Additionally, the Company solicits customer feedback throughout the design phase to improve product development efforts. The Company invested $80.8 million, $74.1 million

Development and $69.1 million on lift truck product and attachment design and development activitiesinnovation of attachments occurs in 2017, 2016 and 2015, respectively.each of the Bolzoni manufacturing plants for the specific products produced in that location.

Nuvera has two research and development locations. In the U.S., Billerica, Massachusetts is the primary location for design, development and testing of fuel-cell stacks and engines. In Europe, the operations at San Donato, Italy are primarily focused on fuel-cell systems integration and testing. The Company invested $23.7 million, $32.9 million and $19.2 million on product design and development activities at Nuvera in 2017, 2016 and 2015, respectively.

Sumitomo-NACCO Joint Venture
The Company has a 50% ownership interest in Sumitomo NACCO Forklift Co., Ltd. (“SN”("SN"), a limited liability company that was formed in 1970 primarily to manufacture and distribute Sumitomo-branded lift trucks in Japan and export Hyster®- and Yale®-branded lift trucks and related components and service parts outside of Japan. Sumitomo Heavy Industries, Ltd. owns the remaining 50% interest in SN. Each stockholder of SN is entitled to appoint directors representing 50% of the vote of SN’s board of directors. All matters related to policies and programs of operation, manufacturing and sales activities require mutual agreement between the Company and Sumitomo Heavy Industries, Ltd. prior to a vote of SN’s board of directors. As a result, the Company accounts for its ownership in SN using the equity method of accounting. The Company purchases Hyster®- and Yale®-branded lift trucks and related component and aftermarket parts from SN for sale outside of Japan under agreed-upon terms. The Company also contracts with SN for engineering design services on a cost plus basis and charges SN for technology used by SN but developed by the Company. During 20172019, SN sold approximately 6,9007,200 lift trucks.

Employees
As of January 31, 20182020, the Company had approximately 6,8007,900 employees. Certain employees in the Danville, Illinois parts depot operations are unionized. The Company’s contract with the Danville union expires in June 2018. Employees2021. All employees at the
Table of Contents

Company's facilities in Berea, Kentucky; Sulligent, Alabama; and Greenville, North Carolinathe United States (other than the Danville, Illinois parts depot) are not represented by unions. In Brazil, all employees are represented by a union. The Company’s contracts with the Brazilian unions expire annually at which time salaries and certain benefits are negotiated for the following year. In Mexico, certain employees are unionized. The Company’s contract with the MexicoMexican union expires annually in March, at which time salaries are negotiated for the following year. Benefits in Mexico are negotiated every other year. 
In Europe, certain employees in the Helsinki, Finland; Salzgitter, Germany; Craigavon, Northern Ireland; Masate, Italy; Piacenza, Italy; San Donato, Italy; and Nijmegen, the Netherlands facilities are unionized.represented by a union or a works council. All of the European employees are part of works councils thator employee forums, which perform a consultative role on business and employment matters.

The Company believes its current labor relations with both union and non-union employees are generally satisfactory. However, there can be no assurances that the Company will be able to successfully renegotiate its union contracts without work stoppages or on acceptable terms. A prolonged work stoppage at a unionized facility could have a material adverse effect on the Company’s business and results of operations.

Environmental Matters
The Company’s manufacturing operations are subject to laws and regulations relating to the protection of the environment, including those governing the management and disposal of hazardous substances. The Company’s policies stress compliance, and the Company believes it is currently in substantial compliance with existing environmental laws. If the Company fails to comply with these laws or its environmental permits, it could incur substantial costs, including cleanup costs, fines and civil and criminal sanctions. In addition, future changes to environmental laws could require the Company to incur significant additional expense or restrict operations. Based on current information, the Company does not expect compliance with environmental requirements to have a material adverse effect on the Company’s financial condition or results of operations.
The Company’s products may also be subject to laws and regulations relating to the protection of the environment, including those governing vehicle exhaust. Regulatory agencies in the United States and Europe have issued or proposed various regulations and directives designed to reduce emissions from spark-ignited engines and diesel engines used in off-road vehicles, such as industrial lift trucks. These regulations require the Company and other lift truck manufacturers to incur costs to modify designs and manufacturing processes and to perform additional testing and reporting. While there can be no assurance, the Company believes the impact of the additional expenditures to comply with these requirements will not have a material adverse effect on its business.
The Company is investigating or remediating historical contamination at some current and former sites caused by its operations or those of businesses it acquired. While the Company is not currently aware that any material outstanding claims or obligations exist with regard to these sites, the discovery of additional contamination at these or other sites could result in significant cleanup costs that could have a material adverse effect on the Company’s financial conditions and results of operations.
In connection with any acquisition made by the Company, the Company could, under some circumstances, be held financially liable for or suffer other adverse effects due to environmental violations or contamination caused by prior owners of businesses the Company has acquired. In addition, under some of the agreements through which the Company has sold businesses or assets, the Company has retained responsibility for certain contingent environmental liabilities arising from pre-closing operations. These liabilities may not arise, if at all, until years later and could require the Company to incur significant additional expenses.

Government and Trade Regulations
The Company has been impacted by ongoing trade disputes with China which has led to the imposition of tariffs resulting in higher material costs. In the past,addition, the Company’s business has been affected in the past by trade disputes between the United States and Europe. In the future, to the extent the Company is affected by trade disputes with other foreign jurisdictions, and increased tariffs are levied on its goods or the materials the Company purchases, its results of operations may be materially adversely affected.

Item 1A. RISK FACTORS
The lift truck business is cyclical. Any downturn in the general economy could result in significant decreases in the Company's revenue and profitability and an inability to sustain or grow the business.
The Company's lift truck business historically has been cyclical. Fluctuations in the rate of orders for lift trucks, attachments and fuel-cell technology reflect the capital investment decisions of the Company's customers, which depend to a certain extent on the general level of economic activity in the various industries the lift truck customers serve. During economic downturns, customers tend to delay new lift truck and parts purchases. Consequently, the Company has experienced, and in the future may continue to
Table of Contents

experience, significant fluctuations in revenues and net income. If there is a downturn in the general economy, or in the industries served by lift truck customers, the Company's revenue and profitability could decrease significantly, and the Company may not be able to sustain or grow the business.
The Company is subject to risks relating to its global operations.
The Company is a U.S.-based multinational corporation that has global operations. Operating globally subjects the Company to changes in government regulations and policies in a large number of jurisdictions around the world, including those related to tariffs and trade barriers, investments, property ownership rights, taxation, and exchange controls. Changes in the relative values of currencies occur from time to time and could affect the Company's operating results.
Further, existing free trade laws and regulations provide certain beneficial duties and tariffs for qualifying imports and exports, subject to compliance with the applicable classification and other requirements. Changes in laws or policies governing the terms of international trade, and in particular increased trade restrictions, tariffs or taxes on imports from countries where the Company manufactures products could have a material adverse impact on the Company's business and financial results.
Part of the strategy to expand worldwide market share is strengthening the Company's non-U.S. distribution network. A part of this strategy also includes decreasing costs by sourcing basic components in lower-cost countries. Implementation of this part of the strategy may increase the impact of the risks to global operations and there can be no assurance that such risks will not have an adverse effect on the Company's revenues, profitability or market share.
Economic and political conditions in the United States and abroad may lead to significant changes in tax rules and regulations. For example, Brexit and proposals to reform non-U.S. tax laws or other regulations could significantly impact how multinational corporations do business. Although the Company cannot predict the final form or impact of any regulation or other proposal, if adopted at all, such regulations and proposals could, if enacted, have a material adverse impact on the Company's profitability.
In addition, operating globally subjects the Company to risks related to the health and welfare of its employees and the employees of suppliers, as well as the workplaces where the Company’s products or critical components from suppliers are manufactured. Conditions resulting from natural disasters or global health epidemics or pandemics, including the Coronavirus, may prevent or delay the Company’s ability to obtain critical components or manufacture and sell the Company’s products. These disruptions could materially affect the Company’s operations and revenues and profitability could be significantly reduced.
The Company depends on a limited number of suppliers for specific critical components.
The Company depends on a limited number of suppliers for some of its critical components, including diesel, gasoline and alternative fuel engines and cast-iron counterweights used to counterbalance some lift trucks. Some of these critical components are imported and subject to regulation, primarily with respect to customary inspection of such products by the U.S. Customs and Border Protection under the auspices of the U.S. Department of Homeland Security. While most components are available from numerous sources or in quantities sufficient to meet requirements, the Company has experienced shortages of key components for certain products, particularly in 2019, which has affected production levels. The results of operations have been and could be adversely affected if the Company is unable to obtain these critical components, or if the costs of these critical components were to increase significantly, due to regulatory compliance or otherwise, and the Company was unable to pass the cost increases on to its customers.
The cost of raw materials used by the Company's products has fluctuated and may continue to fluctuate, which could materially reduce the Company's profitability.
At times, the Company has experienced significant increases in materials costs, primarily as a result of global increases in industrial metals, including steel, lead and copper and other commodity prices, such as rubber, as a result of increased demand and limited supply. The Company manufactures products that include raw materials that consist of steel, rubber, copper, lead, castings and counterweights. The Company also purchases parts provided by suppliers that are manufactured from castings and steel or contain lead. The cost of these parts is affected by the same economic conditions that impact the cost of the parts the

Company manufactures. The cost to manufacture lift trucks and related service parts has been and will continue to be affected by fluctuations in prices for these raw materials. If costs of these raw materials increase, the Company's profitability could be materially reduced.
The pricing and costs of the Company's products have been and may continue to be impacted by currency fluctuations, which could materially increase costs, and result in material exchange losses and reduce operating margins.
Because the Company conducts transactions in various currencies, including euros, U.S. dollars, euros, Japanese yen, British pounds, Mexican pesos, Australian dollars, Swedish kroner, Mexican peso, Brazilian real and Chinese renminbi, lift truck pricing is subject to the effects of fluctuations in the value of these currencies and fluctuations in the related currency exchange rates. As a result, the
Table of Contents

Company's sales have historically been affected by, and may continue to be affected by, these fluctuations. In addition, exchange rate movements between currencies in which the Company purchases materials and components and manufactures certain products and the currencies in which the Company sells those products have been affected by and may continue to result in exchange losses that could materially reduce operating margins. Furthermore, the Company's hedging contracts may not fully offset risks from changes in currency exchange rates.
The Company is subject to risks relating to its non-U.S. operations.
Non-U.S. operations represent a significant portion of the Company's business. The Company expects revenue from non-U.S. markets to continue to represent a significant portion of total revenue. The Company owns or leases manufacturing facilities in Brazil, Italy, Mexico, the Netherlands, Northern Ireland, Finland, Germany and China, and owns interests in joint ventures with facilities in Japan, the Philippines and Vietnam. The Company also sells U.S. produced products to non-U.S. customers and sells non-U.S. produced products to U.S. customers. The Company's non-U.S. operations are subject to additional risks, which include:
potential political, economic and social instability in the non-U.S. countries in which the Company operates;
currency risks, including those risks set forth under, “The pricing and costs of the Company's products have been and may continue to be impacted by currency fluctuations, which could materially increase costs and result in material exchange losses and reduce operating margins”;
imposition of or increases in currency exchange controls;
potential inflation in the applicable non-U.S. economies;
imposition of or increases in import duties and other tariffs on products;
imposition of or increases in non-U.S. taxation of earnings and withholding on payments received;
regulatory changes affecting non-U.S. operations; and
stringent labor regulations.
Part of the strategy to expand worldwide market share is strengthening the Company's non-U.S. distribution network. A part of this strategy also includes decreasing costs by sourcing basic components in lower-cost countries. Implementation of this part of the strategy may increase the impact of the risks described above and there can be no assurance that such risks will not have an adverse effect on the Company's revenues, profitability or market share.
The Company operates in various taxing jurisdictions around the world in which the tax laws, regulations and administrative practices are often subject to interpretation as well as to change. Although the Company has sought to reduce this uncertainty by obtaining rulings from the tax authorities in certain cases, the Company's positions may still be subject to challenge. If the Company were to become subject to a challenge, the outcome could have a significant negative effect on the Company's operating results and financial condition.
Economic and political conditions in the United States and abroad may lead to significant changes in tax rules and regulations and/or lead to the adoption of restrictions on international trade. For example, recent measures to reform U.S. tax laws and proposals to reform non-U.S. tax laws or other regulations could significantly impact how multinational corporations are taxed. Although the Company cannot predict the final form of any regulation, if adopted at all, such regulations could, if enacted, have a material adverse impact on the Company's profitability.
The Company relies primarily on its network of independent dealers to sell lift trucks and aftermarket parts and the Company has no direct control over sales by those dealers to customers. Ineffective or poor performance by these independent dealers could result in a significant decrease in revenues and profitability and the inability to sustain or grow the business.
The Company relies primarily on independent dealers for sales of lift trucks and aftermarket parts. Sales of the Company's products are therefore subject to the quality and effectiveness of the dealers, who are not subject to the Company's direct control. As a result, ineffective or poorly performing dealers could result in a significant decrease in revenues and profitability and the Company may not be able to sustain or grow its business.

The Company depends on a limited number of suppliers for specific critical components.
The Company depends on a limited number of suppliers for some of its critical components, including diesel, gasoline and alternative fuel engines and cast-iron counterweights used to counterbalance some lift trucks. Some of these critical components are imported and subject to regulation, primarily with respect to customary inspection of such products by the U.S. Customs and Border Protection under the auspices of the U.S. Department of Homeland Security. The results of operations could be adversely affected if the Company is unable to obtain these critical components, or if the costs of these critical components were to increase significantly, due to regulatory compliance or otherwise, and the Company was unable to pass the cost increases on to its customers.

The Company may not be successful in commercializing Nuvera’s technology, which success would depend, in part, on the Company’s ability to protect Nuvera’s intellectual property.

The Company may not be able to commercialize Nuvera’s fuel-cell technologies on economically efficient terms. Unforeseen difficulties, such as delays in development due to design defects or changes in specifications and insufficient research and development resources or cost overruns, may hinder the Company’s ability to incorporate Nuvera’s technologies into its product lines on an economically favorable basis or at all.

Furthermore, Nuvera’s commercial success will depend largely on the Company’s ability to maintain patent and other intellectual property protection covering certain of Nuvera’s technologies. Nuvera’s fuel-cell technology may not be economically viable if the Company is unable to prevent others from infringing or successfully challenging the validity of certain patents and other intellectual property rights attributable to Nuvera.
If the Company's strategic initiatives, including the introduction of new products, do not prove effective, revenues, profitability and market share could be significantly reduced.
Changes in the timing of implementation of the Company's current strategic initiatives may result in a delay in the expected recognition of future costs and realization of future benefits. In addition, if future industry demand levels are lower than expected, the actual annual cost savings could be lower than expected. If the Company is unable to successfully implement these strategic initiatives, revenues, profitability and market share could be significantly reduced.
The Company may not be successful in commercializing Nuvera’s technology, which success would depend, in part, on the Company’s ability to protect Nuvera’s intellectual property.
The Company may not be able to commercialize Nuvera’s fuel-cell technologies on economically efficient terms. Unforeseen difficulties, such as delays in development due to design defects or changes in specifications and insufficient research and development resources or cost overruns, may hinder the Company’s ability to incorporate Nuvera’s technologies into its product lines on an economically favorable basis or at all.
Furthermore, Nuvera’s commercial success will depend largely on the Company’s ability to maintain patent and other intellectual property protection covering certain of Nuvera’s technologies. Nuvera’s fuel-cell technology may not be economically viable if the Company is unable to prevent others from infringing or successfully challenging the validity of certain patents and other intellectual property rights attributable to Nuvera.
Failure to compete effectively within the Company's industry could result in a significant decrease in revenues and profitability.
The Company experiences intense competition in the sale of lift trucks and aftermarket parts. Competition in the lift truck industry is based primarily on strength and quality of dealers, brand loyalty, customer service, new lift truck sales prices, availability of products and aftermarket parts, comprehensive product line offerings, product performance, product quality and features and the cost of ownership over the life of the lift truck. The Company competes with several global manufacturers that operate in all major markets. These manufacturers may have lower manufacturing costs and greater financial resources than the Company, which may enable them to commit larger amounts of capital in response to changing market conditions. If the Company fails to compete effectively, revenues and profitability could be significantly reduced.
If the global capital goods market declines, the cost saving efforts the Company has implemented may not be sufficient to achieve the benefits expected.
If the global economy or the capital goods market declines, revenues could decline. If revenues are lower than expected, the programs the Company has implemented may not achieve the benefits expected. Furthermore, the Company may be forced to take additional cost saving steps that could result in additional charges that materially adversely affect the ability to compete or implement the Company's current business strategies.
The Company is subject to import and export controls, which could subject the Company to liability or impair the Company's ability to compete in international markets.
Due to the international scope of the Company's operations, the Company is subject to a complex system of import- and export-related laws and regulations, including U.S. export control and customs regulations and customs regulations of other countries. These regulations are complex and vary among the legal jurisdictions in which the Company operates. Obtaining the necessary authorizations, including any required license, for a particular transaction may be time-consuming, is not guaranteed, and may result in the delay or loss of sales opportunities. Furthermore, U.S. export control laws and economic sanctions laws prohibit certain transactions with U.S. embargoed or sanctioned countries, governments, persons and entities. Any alleged or actual
Table of Contents

failure to comply with such laws and regulations may subject the Company to government scrutiny, investigation, and civil and criminal penalties, and may limit the Company's ability to import or export products or to provide services outside the United States. Depending on severity, any of these penalties could have a material impact on the Company's business, financial condition and results of operations. There can be no assurance that laws and regulations will not be changed in ways which will require the Company to modify its business models and objectives or affect the Company's returns on investments by restricting existing activities and products, subjecting them to escalating costs or prohibiting them outright.
The Company is subject to recourse or repurchase obligations with respect to the financing arrangements of some of its customers.
Through arrangements with WF and others, dealers and other customers are provided financing for new lift trucks in the United States and in major countries of the world outside of the United States. Through these arrangements, the Company's dealers and certain customers are extended credit for the purchase of lift trucks to be placed in the dealer’s floor plan inventory or the financing of lift trucks that are sold or leased to customers. For some of these arrangements, the Company provides recourse or repurchase obligations such that it would become obligated in the event of default by the dealer or customer. Total amounts subject to these types of obligations were $203.5$179.7 million and $149.3$192.7 million at December 31, 20172019 and 2016 ,2018, respectively. Generally, the Company maintains a perfected security interest in the assets financed such that, in the event that the Company becomes obligated under the terms of the recourse or repurchase obligations, it may take title to the assets financed. The Company cannot be certain, however, that the security interest will equal or exceed the amount of the recourse or repurchase

obligations. In addition, the Company cannot be certain that losses under the terms of the recourse or repurchase obligations will not exceed the reserves that have been set aside in the consolidated financial statements. The Company could incur a charge to earnings if reserves prove to be inadequate, which could have a material adverse effect on results of operations and liquidity for the period in which the charge is taken.
Actual liabilities relating to pending lawsuits may exceed the Company's expectations.
The Company is a defendant in pending lawsuits involving, among other things, product liability claims. The Company cannot be sure that it will succeed in defending these claims, that judgments will not be rendered against the Company with respect to any or all of these proceedings or that reserves set aside or insurance policies will be adequate to cover any such judgments. The Company could incur a charge to earnings if reserves prove to be inadequate or the average cost per claim or the number of claims exceed estimates, which could have a material adverse effect on results of operations and liquidity for the period in which the charge is taken and any judgment or settlement amount is paid.

Other products may be introduced to the market by competitors, making the Nuvera technology less marketable.

The use of fuel-cell technology in industrial and commercial applications is a relatively new development. Companies implementing such technology face competition from competitors that integrate more traditional energy technologies into their product lines, as well as competitors that have implemented or are implementing alternatives to traditional energy technologies, such as lithiumlithium-ion batteries, fuel additives and other high efficiency or “renewable” technologies. Any of these technologies may have more established or otherwise more attractive manufacturing, distribution and operating cost features, which could negatively impact customers’ preferences for product lines that incorporate fuel-cell technology and, as a result, diminish the marketability of products incorporating Nuvera technology.
Actual liabilities relating to environmental matters may exceed the Company's expectations.
The Company's manufacturing operations are subject to laws and regulations relating to the protection of the environment, including those governing the management and disposal of hazardous substances. If the Company fails to comply with these laws or the Company's environmental permits, then the Company could incur substantial costs, including cleanup costs, fines and civil and criminal sanctions. In addition, future changes to environmental laws could require the Company to incur significant additional expenses or restrict operations.
The Company's products may also be subject to laws and regulations relating to the protection of the environment, including those governing vehicle exhausts. Regulatory agencies in the United States and Europe have issued or proposed various regulations and directives designed to reduce emissions from spark-ignited engines and diesel engines used in off-road vehicles, such as industrial lift trucks. These regulations require the Company and other lift truck manufacturers to incur costs to modify designs and manufacturing processes and to perform additional testing and reporting.
The Company is investigating or remediating historical contamination at some current and former sites caused by its operations or those of businesses it acquired. While the Company is not currently aware that any material outstanding claims or obligations exist with regard to these sites, the discovery of additional contamination at these or other sites could result in significant cleanup costs that could have a material adverse effect on itsthe Company's financial condition and results of operations.
Table of Contents

In connection with any acquisition the Company has made, it could, under some circumstances, be held financially liable for or suffer other adverse effects due to environmental violations or contamination caused by prior owners of businesses the Company has acquired. In addition, under some of the agreements through which the Company has sold businesses or assets, it has retained responsibility for certain contingent environmental liabilities arising from pre-closing operations. These liabilities may not arise, if at all, until years later and could require the Company to incur significant additional expenses, which could materially adversely affect the results of operations and financial condition.
The Company is subject to import and export controls, which could subject the Company to liability or impair the Company's ability to compete in international markets.
Due to the international scope of the Company's operations, the Company is subject to a complex system of import- and export-related laws and regulations, including U.S. export control and customs regulations and customs regulations of other countries. These regulations are complex and vary among the legal jurisdictions in which the Company operates. Obtaining the necessary authorizations, including any required license, for a particular transaction may be time-consuming, is not guaranteed,unable to protect its information technology infrastructure against service interruptions, data corruption, cyber-based attacks or network breaches, which have in the past and maycould in the future disrupt business operations or result in the delay ora loss of sales opportunities. Furthermore, U.S. export control lawsdata confidentiality.
The Company relies on information technology networks and economic sanctions laws prohibit certain transactions with U.S. embargoedsystems, including the Internet, to process, transmit and store electronic information, and to manage or sanctioned countries, governments, personssupport a variety of business processes and entities. Any alleged or actual failureactivities, including supply chain, manufacturing, distributing, invoicing and collection. The Company uses information technology systems to record, process and summarize financial information and results of operations for internal reporting purposes and to comply with such lawsregulatory financial reporting, legal and regulationstax requirements. These technological networks and systems have been and may subjectin the future be susceptible to damage, disruptions or shutdowns due to failures during the process of upgrading or replacing software, databases or components; power outages; hardware failures; or computer viruses or other types of cyber attacks. In addition, security breaches could result in unauthorized disclosure of confidential information. If these information technology systems suffer severe damage, disruption, breach, or shutdown, and business continuity plans do not effectively resolve the issues in a timely manner, there could be a negative impact on operating results or the Company to government scrutiny, investigation, and civil and criminal penalties, and may limit the Company's ability to importsuffer financial or export products or to provide services outside the United States. Depending on severity, any of these penalties could have a material impact on the Company's business, financial

condition and results of operations. There can be no assurance that laws and regulations will not be changed in ways which will require the Company to modify its business models and objectives or affect the Company's returns on investments by restricting existing activities and products, subjecting them to escalating costs or prohibiting them outright.reputational damage.
The Company may become subject to claims under non-U.S. laws and regulations, which may require expensive, time consumingtime-consuming and distracting litigation.
Because the Company has employees, property and business operations outside of the United States, it is subject to the laws and the court systems of many jurisdictions. The Company may become subject to claims outside the United States based in non-U.S. jurisdictions for violations of their laws with respect to the Company's non-U.S. operations. In addition, these laws may be changed or new laws may be enacted in the future. Non-U.S. litigation is often expensive, time consuming and distracting. As a result, any of these risks could significantly reduce profitability and the Company's ability to operate its businesses effectively.
The Company may be subject to risks relating to increasing cash requirements of certain employee benefitsbenefit plans which may affect its financial position.
The expenses recorded for, and cash contributions required to be made to, the Company's defined benefit pension plans are dependent on changes in market interest rates and the value of plan assets, which are dependent on actual investment returns. Significant changes in market interest rates, decreases in the value of plan assets or investment losses on plan assets may require the Company to increase the cash contributed to defined benefit plans which may affect its financial position.
The Company is dependent on key personnel, and the loss of these key personnel could significantly reduce profitability.
The Company is highly dependent on the skills, experience and services of key personnel, and the loss of key personnel could have a material adverse effect on its business, operating results and financial condition. Employment and retention of qualified personnel is important to the successful conduct of the Company's business. Therefore, the Company's success also depends upon its ability to recruit, hire, train and retain additional skilled and experienced management personnel. The Company's inability to hire and retain personnel with the requisite skills could impair its ability to manage and operate its business effectively and could significantly reduce profitability.
Certain members of the Company’s extended founding family own a substantial amount of its Class A and Class B common stock and, if they were to act in concert, could control the outcome of director elections and other stockholder votes on significant corporate actions.
The Company has two classes of common stock: Class A common stock and Class B common stock. Holders of Class A common stock are entitled to cast one vote per share and, as of December 31, 2017,2019, accounted for approximately 2425 percent of the voting power of the Company. Holders of Class B common stock are entitled to cast ten votes per share and, as of December 31, 2017,2018, accounted for the remaining voting power of the Company. As of December 31, 2017,2019, certain members of the Company’s extended founding family held approximately 2731 percent of the Company’s outstanding Class A common stock and approximately 85 percent of the Company’s outstanding Class B common stock. On the basis of this common stock ownership, certain members of the Company’s extended founding family could have exercised 7172 percent of the Company’s total voting power. Although there is no voting agreement among such extended family members, in writing or otherwise, if they were to act in concert, they could control the outcome of director elections and other stockholder votes on significant corporate actions, such as certain amendments to the Company’s certificate of incorporation and salessale of the Company or
Table of Contents

substantially all of its assets. Because certain members of the Company’s extended founding family could prevent other stockholders from exercising significant influence over significant corporate actions, the Company may be a less attractive takeover target, which could adversely affect the market price of its common stock.


Item 1B. UNRESOLVED STAFF COMMENTS
None.

Item 2. PROPERTIES
The following table presents the principal assembly, manufacturing, distribution and office facilities that the Company owns or leases:
Segment  Facility Location  Owned/Leased  Function(s)
Lift Truck      
Americas Berea, Kentucky  Owned  Assembly of lift trucks and manufacture of component parts
  Charlotte, North Carolina Leased Customer experience and training center
   Cleveland, Ohio  Leased  Global headquarters
   Danville, Illinois  Owned  Americas parts distribution center
   Fairview, Oregon  Owned  Global executive administrative center; counterbalancedCounterbalanced development center for design and testing of lift trucks, prototype equipment and component parts
   
Greenville,
North Carolina
  Owned  
Divisional headquarters and marketing and sales operations for Hyster® and Yale® in the Americas; Americas warehouse development center; assembly of lift trucks and manufacture of component parts
  Itu, Brazil Owned Assembly of lift trucks and parts distribution center
   
Ramos Arizpe,
Mexico
OwnedManufacture of component parts for lift trucks
Sulligent, Alabama  Owned  Manufacture of component parts for lift trucks
EMEA  
Craigavon,
Northern Ireland
  Owned  Manufacture of lift trucks and cylinders; frame and mast fabrication for EMEA
  Frimley, Surrey, United KingdomUK Leased 
Divisional headquarters and marketing and sales operations for Hyster® and Yale®in EMEA
   Irvine, Scotland  Leased  European administrative center
   Masate, Italy  Leased  Assembly of lift trucks; European warehouse development center
   
Nijmegen,
The the Netherlands
  Owned  Big trucks development center; manufacture and assembly of big trucks and component parts; European parts distribution center
JAPIC Fuyang, ChinaOwnedManufacture and assembly of lift trucks
Pune, IndiaLeasedEngineering design services
Shanghai, China  Owned  Assembly of lift trucks, by Shanghai Hyster joint venture, sale of parts and marketing operations of China
   Sydney, Australia  Leased  Divisional headquarters and sales and marketing for JAPIC; JAPIC parts distribution center
Pune, IndiaLeasedEngineering design services
Bolzoni Helsinki, Finland Leased Manufacture and distribution of Bolzoni products
  Heibei, China Owned Manufacture and distribution of Bolzoni products
  Homewood, IllinoisOwnedManufacture and distribution of Bolzoni products
Piacenza, Italy Owned Bolzoni headquarters; manufacture and distribution of Bolzoni products
Prato, ItalyOwnedManufacture and distribution of Bolzoni products
  Salzgitter, Germany Owned Manufacture and distribution of Bolzoni products
Sulligent, AlabamaOwnedManufacture of Bolzoni products and manufacture of component parts for Lift Truck
  Wuxi, China Owned Manufacture and distribution of Bolzoni products
Nuvera Billerica, Massachusetts Leased Nuvera research and development laboratory
San Donato, ItalyLeasedNuvera integration and testing
SN’s operations are supported by three facilities. SN’s headquarters are located in Obu, Japan at a facility owned by SN. The Obu facility also has assembly and distribution capabilities for lift trucks and parts. In Cavite, the Philippines and Hanoi, Vietnam, SN owns facilities for the manufacture of components for SN and the Company's products.


Item 3. LEGAL PROCEEDINGS
The Company is, and will likely continue to be, involved in a number of legal proceedings which the Company believes generally arise in the ordinary course of the business, given its size, history and the nature of its business and products. The Company is not a party to any material legal proceeding.

Item 4. MINE SAFETY DISCLOSURES
None.

Table of Contents

Item 4A. INFORMATION ABOUT OUR EXECUTIVE OFFICERS OF THE REGISTRANT
The following tables set forth the name, age, current position and principal occupation and employment during the past five years of the Company’s executive officers.
Name Age Current Position Other Positions
Alfred M. Rankin, Jr. 7678

 Chairman, President and Chief Executive Officer of Hyster-Yale (from prior to 2013)2015), Chairman of HYG (from prior to 2013)2015).  
Colin WilsonRajiv K. Prasad 6356

 President and Chief Executive Officer HYG of Hyster-Yale Group (from September 2014), PresidentJanuary 2020).Chief Product and Chief ExecutiveOperations Officer of HYG (from September 2014).(February 2018 to December 2019), Senior Vice President, Global Product Development, Manufacturing and Chief Operating Officer of HYG (from November 2013 to September 2014), President, AmericasSupply Chain Strategy of HYG (from prior to 20132015 to September 2014), Vice President and Chief Operating Officer of HYG (from prior to 2013 to November 2013)February 2018).
Gregory J. Breier 5254

 Vice President, Tax of Hyster-Yale (from May 2014)2015), Vice President, Tax of HYG (from prior to 2013)2015).  
Brian K. Frentzko 5759

 Vice President, Treasurer of Hyster-Yale (from prior to 2013)2015), Vice President, Treasurer of HYG (from prior to 2013)2015).  
Amy E. GerbickStephen J. Karas 4650

 Associate General Counsel,Vice President, President Asia Pacific (from February 2020)Vice President, Global Supply Chain of HYG (November 2015 to January 2020), Director of Corporate Compliance and Assistant Secretary of Hyster-Yale (from May 2014), Associate General Counsel, Director of Corporate Compliance and Assistant SecretarySupply Chain, Americas of HYG (from May 2014).Associate, Jones Day (a law firm) (from prior to 20132015 to May 2014)October 2015).
Jennifer M. Langer 4446

 Vice President, Controller of Hyster-Yale (from February 2013)prior to 2015), Vice President, Controller of HYG (from February 2013).Controller of Hyster-Yale (from prior to 2013 to February 2013), Controller of HYG (from prior to 2013 to February 2013).
Lauren E. Miller63
Senior Vice President, Chief Marketing Officer of Hyster-Yale (from January 2015), Senior Vice President, Chief Marketing Officer of HYG (from January 2015). Senior
David M. LeBlanc55
Vice President, MarketingStrategy, Planning and Consulting of Hyster-Yale (from prior to 2013 to January 2015), Senior Vice President, Marketing and ConsultingBusiness Development of HYG (from priorAugust 2018).Group President, International Engineered Support Structures, Valmont Industries, Inc. (an industrial company) (from April 2015 to 2013 to January 2015)February 2018).
Charles F. Pascarelli 5860

 Senior Vice President, President, Americas of HYG (from January 2015) President, Sales and Marketing, Americas of HYG (from March 2013prior to 2015 to January 2015), President, Sales and Marketing, The Raymond Corporation (an electrical materials handling company) (from prior to 2013 to March 2013).
Rajiv K. Prasad54
Chief Product and Operations Officer of HYG (from February 2018).Senior Vice President, Global Product Development, Manufacturing and Supply Chain Strategy of HYG (from September 2014 to February 2018). Vice President, Global Product Development and Manufacturing of HYG (from prior to 2013 to September 2014).
Anthony J. Salgado 4749

Chief Operating Officer of HYG (from July 2019). Senior Vice President, JAPIC of HYG (from January 2016).2016 to June 2019), Vice President, Corporate Officer, UniCarriers Corporation (an industrial company) (from April 2014prior to 2015 to January 2016), President, UniCarriers Americas Corporation (from October 2013prior to 2015 to January 2016), Vice President, Manufacturing Operations, UniCarriers Americas Corporation (from prior to 2013 to October 2013).
Harry Sands 6668

 Senior Vice President, Managing Director, Europe, Middle East and Africa of HYG (from June 2015). Vice President, Manufacturing EMEA of HYG (from prior to 20132015 to June 2015).
Kenneth C. Schilling 5860

 Senior Vice President and Chief Financial Officer of Hyster-Yale (from September 2014)prior to 2015), Senior Vice President and Chief Financial Officer of HYG (from prior to 2015).
Patric Schroeter46
Vice President Finance, JAPIC (from September 2014)2019). Vice President and Chief Financial Officer of Hyster-YaleCFO Asia-Pacific, KION Group (a materials handling company) (from October 2016 to September 2019), Director, Cost Transformation Asia, Middle-East, Africa and Australia, BT Group (a telecommunications company) (from July 2015 to September 2016), Managing Director, OneAxcess (an advisory and management company) (from prior to 20132015 to September 2014), Vice President and Chief Financial Officer of HYG (from prior to 2013 to September 2014)June 2015).
Gopichand Somayajula


 6163

 Vice President, Global Product Development of HYG (from May 2013)prior to 2015) Vice President, Counterbalanced Engineering of HYG (from prior to 2013 to May 2013).
Suzanne S. Taylor 5557

 Senior Vice President, General Counsel and Secretary of Hyster-Yale (from May 2016), Senior Vice President, General Counsel and Secretary of HYG (from May 2016). Vice President, Deputy General Counsel and Assistant Secretary of Hyster-Yale (from February 2013prior to 2015 to May 2016), Vice President, Deputy General Counsel and Assistant Secretary of HYG (from February 2013prior to 2015 to May 2016), Deputy General Counsel and Assistant Secretary of Hyster-Yale (from prior to 2013 to February 2013), Deputy General Counsel and Assistant Secretary of HYG (from prior to 2013 to February 2013).
Mark H. Trivett 4850

 Vice President Finance, Europe, Middle East and Africa of HYG (from prior to 2013)2015).  
Raymond C. Ulmer 5456

 Vice President Finance, Americas of HYG (from prior to 2013)2015).  
The information under this Item is furnished pursuant to Instruction 3 to Item 401(b) of Regulation S-K.There exists no arrangement or understanding between any executive officer and any other person pursuant to which such executive officer was elected. Each executive officer serves until his or her successor is elected and qualified.

Table of Contents

PART II
Item 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
The Company's Class A common stock is traded on the New York Stock Exchange under the ticker symbol “HY.” ForThere is no established public trading market for the Company's Class B common stock, due to transfer restrictions,and no alternative trading marketor quotation system for the Company's Class B common stock has developed,been or is expected to develop.be established. The Class B common stock is convertible into Class A common stock on a one-for-one basis. The high and low market prices for the Class A common stock and dividends per share for both classes of common stock for each quarter are presented in the tables below:
 2017
 Market Price  
 High Low Cash Dividend
First quarter$69.00
 $54.07
 $0.2950
Second quarter$76.50
 $53.50
 $0.3025
Third quarter$77.07
 $62.62
 $0.3025
Fourth quarter$93.90
 $76.10
 $0.3025
 2016
 Market Price  
 High Low Cash Dividend
First quarter$68.21
 $44.41
 $0.2850
Second quarter$70.19
 $55.80
 $0.2950
Third quarter$66.43
 $47.25
 $0.2950
Fourth quarter$68.75
 $49.84
 $0.2950
At December 31, 2017,2019, there were approximately 846842 Class A common stockholders of record and approximately 891847 Class B common stockholders of record.
Purchases of Equity Securities by the Issuer and Affiliated Purchasers
There have been no issuer purchases of equity securities and no publicly announced repurchase program currently exists.
Issuer Purchases of Equity Securities
Period
(a)
Total Number of Shares Purchased
(b)
Average Price Paid per Share
(c)
Total Number of Shares Purchased as Part of the Publicly Announced Program
(d)
Maximum Number of Shares (or Approximate Dollar Value) that May Yet Be Purchased Under the Program
Month #1
(October 1 to 31, 2017)
$—$0
Month #2
(November 1 to 30, 2017)
$—$0
Month #3
(December 1 to 31, 2017)
$—$0
     Total$—$0


Item 6. SELECTED FINANCIAL DATA
Year Ended December 31Year Ended December 31
2017 (1)
 2016 2015 2014 20132019 2018 
2017 (1)
 2016 2015
(In millions, except per share data)(In millions, except per share and employee data)
Operating Statement Data:                  
Revenues$2,885.2
 $2,569.7
 $2,578.1
 $2,767.2
 $2,666.3
$3,291.8
 $3,179.1
 $2,885.2
 $2,569.7
 $2,578.1
Operating profit$76.0
 $34.9
 $103.5
 $148.8
 $134.3
$53.9
 $38.8
 $74.1
 $32.9
 $103.5
Net income$48.9
 $42.3
 $75.1
 $110.2
 $110.2
$36.6
 $34.3
 $48.9
 $42.3
 $75.1
Net (income) loss attributable to noncontrolling interest(0.3) 0.5
 (0.4) (0.4) (0.2)(0.8) 0.4
 (0.3) 0.5
 (0.4)
Net income attributable to stockholders$48.6
 $42.8
 $74.7
 $109.8
 $110.0
$35.8
 $34.7
 $48.6
 $42.8
 $74.7
Basic earnings per share attributable to stockholders:$2.95
 $2.61
 $4.58
 $6.61
 $6.58
Diluted earnings per share attributable to stockholders:$2.94
 $2.61
 $4.57
 $6.58
 $6.54
Basic earnings per share attributable to stockholders$2.15
 $2.10
 $2.95
 $2.61
 $4.58
Diluted earnings per share attributable to stockholders$2.14
 $2.09
 $2.94
 $2.61
 $4.57
Balance Sheet Data at December 31: 
  
  
  
  
 
  
  
  
  
Total assets$1,647.9
 $1,287.1
 $1,095.9
 $1,120.8
 $1,161.3
$1,847.2
 $1,742.1
 $1,647.9
 $1,287.1
 $1,095.9
Long-term debt$216.2
 $82.2
 $19.6
 $12.0
 $6.7
$204.7
 $210.1
 $216.2
 $82.2
 $19.6
Stockholders' equity$565.5
 $463.8
 $460.8
 $454.5
 $449.8
$544.3
 $527.4
 $565.5
 $463.8
 $460.8
Cash Flow Data: 
  
  
  
  
 
  
  
  
  
Provided by (used for) operating activities$164.7
 $(48.9) $89.4
 $100.0
 $152.9
$76.7
 $67.6
 $164.7
 $(48.9) $89.4
Used for investing activities$(47.3) $(145.1) $(31.3) $(44.4) $(26.1)$(42.0) $(110.9) $(47.3) $(145.1) $(31.3)
Provided by (used for) financing activities$53.1
 $77.9
 $(7.1) $(110.5) $(104.4)$(51.6) $(87.6) $53.1
 $77.9
 $(7.1)
Other Data: 
  
  
  
  
 
  
  
  
  
Per share data: 
  
  
  
  
 
  
  
  
  
Cash dividends$1.2025
 $1.1700
 $1.1300
 $1.0750
 $1.0000
$1.2625
 $1.2325
 $1.2025
 $1.1700
 $1.1300
Market value at December 31$85.16
 $63.77
 $52.45
 $73.20
 $93.16
$58.96
 $61.96
 $85.16
 $63.77
 $52.45
Stockholders' equity at December 31$34.35
 $28.30
 $28.23
 $27.98
 $26.91
$32.66
 $31.85
 $34.35
 $28.30
 $28.23
Actual shares outstanding at December 3116.462
 16.391
 16.324
 16.241
 16.714
16.667
 16.561
 16.462
 16.391
 16.324
Basic weighted average shares outstanding16.447
 16.376
 16.307
 16.607
 16.725
16.645
 16.540
 16.447
 16.376
 16.307
Diluted weighted average shares outstanding16.514
 16.427
 16.355
 16.675
 16.808
16.726
 16.602
 16.514
 16.427
 16.355
Total employees at December 31(2)
6,800
 6,500
 5,400
 5,400
 5,100
7,900
 7,700
 6,800
 6,500
 5,400
(1)During 2017, the Company recognized $19.8 million of equity income from HYGFS and $38.2 million of income tax expense as a result of the Tax Cuts and Jobs Act (the “Tax Reform Act”), which was signed into law on December 22, 2017. Further information on the impacts of the Tax Reform Act is discussed in Note 67 to the consolidated financial statements.
(2)Excludes temporary employees.



Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




OVERVIEW
Hyster-Yale Materials Handling, Inc. ("Hyster-Yale" or the "Company") and its subsidiaries, including its operating company Hyster-Yale Group, Inc. ("HYG"), is a leading, globally integrated, full-line lift truck manufacturer. The Company offers a broad array of solutions aimed at meeting the specific materials handling needs of its customers, including attachments and hydrogen fuel cell power products, telematics, automation and fleet management services, as well as an arraya variety of other power options for its lift trucks. The Company, through HYG, designs, engineers, manufactures, sells and services a comprehensive line of lift trucks, attachments and aftermarket parts marketed globally primarily under the Hyster® and Yale® brand names, mainly to independent Hyster® and Yale® retail dealerships. The materials handling business historically has been cyclical because the rate of orders for lift trucks fluctuates depending on the general level of economic activity in the various industries and countries its customers serve. Lift trucks and component parts are manufactured in the United States, China, Northern Ireland, Mexico, the Netherlands, the Philippines, Italy, Japan, Vietnam and Brazil.


The Company owns a 75% majority interest in Hyster-Yale Maximal Forklift (Zhejiang) Co., Ltd. ("Hyster-Yale Maximal"). Hyster-Yale Maximal is a Chinese manufacturer of low-intensity and standard lift trucks and specialized material handling equipment. Hyster-Yale Maximal also designs and produces specialized products in the port equipment and rough terrain forklift markets. The results of Hyster-Yale Maximal are included in the JAPIC segment since the date of acquisition.

The Company operates Bolzoni S.p.A. ("Bolzoni"). Bolzoni is a leading worldwide producer and distributor of attachments, forks and lift tables marketed under the Bolzoni Auramo®, Auramo® and Meyer® brand names. Bolzoni products are manufactured in the United States, Italy, China, Germany and Finland. Through the design, production and distribution of a wide range of attachments, Bolzoni has a strong presence in the market niche of lift-truck attachments and industrial material handling.


In 2019, as part of a plan to expand Bolzoni's capabilities in the United States, Bolzoni's North America attachment manufacturing moved into HYG's Sulligent, Alabama manufacturing facility. As a result, effective January 1, 2019, the Sulligent facility became a Bolzoni facility. Accordingly, the results of the Sulligent facility in 2019 have been included in the Bolzoni segment and the historical results of operations of the Sulligent facility for 2018 and 2017 have been included in the Bolzoni segment.

The Company also operates Nuvera Fuel Cells, LLC ("Nuvera"). Nuvera is an alternative-power technology company focused on the design, manufacture and sale of hydrogen fuel-cell stacks and engines. Nuvera also supports on-site hydrogen production and dispensing systems that are designed to deliver clean energy solutions to customers.  


Competition in the materials handling industry is intense and is based primarily on strength and quality of distribution, brand loyalty, customer service, new lift truck sales prices, availability of products and aftermarket parts, comprehensive product line offerings, product performance, product quality and features and the cost of ownership over the life of the lift truck. The Company competes with several global lift truck manufacturers that operate in all major markets, as well as other niche companies. The lift truck industry also competes with alternative methods of materials handling, including conveyor systems and automated guided vehicle systems. The Company's aftermarket parts offerings compete with parts manufactured by other lift truck manufacturers, as well as companies that focus solely on the sale of generic parts.


The Company's mission is to be a leading, globally integrated designer, manufacturer and marketer of a complete range of lift-truck solutions by leveraging its high-quality, application-tailored lift trucks, attachments and power solutions to offer the lowest cost of ownership and the best overall value. The Company’s core competency is lift truck manufacturing, but its goal is to become the lift truck solutions partner to the materials handling market, one customer and one industry at a time.


The Company’s objective is to provide a wide-range of solutions to its customers to generate profitable growth through increasing volumes, which in turn are expected to generate market share gains and drive improved margins. The Company plans to accomplish these objectives by implementing its core strategic initiatives to: provide the lowest cost of ownership, while enhancing productivity for customers; be the leader in the delivery of industry- and customer-focused solutions; provide the lowest cost of ownership, while enhancing productivity for customers; be the leader in independent distribution; grow in emerging markets; be the leader in the attachments business and be a leader in fuel cells and their applications.

Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)


Critical Accounting Policies and Estimates
The discussion and analysis of financial condition and results of operations are based upon the Company's consolidated financial statements, which have been prepared in accordance with U.S. generally accepted accounting principles. The preparation of these financial statements requires the use of estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosures of contingent assets and liabilities, if any. On an ongoing basis, the Company evaluates its estimates based on historical experience, actuarial valuations and various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from those estimates.
The Company believes the following are critical accounting policies affect the morepolicies. Certain of these are critical accounting estimates as they require significant judgments and estimates used in the preparation of the consolidated financial statements.

Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)


Revenue recognition: Revenues are recognized based upon the terms of contracts with customers, which is generally when title transfers and risk of loss passes as customer orders are completed and shipped. For the Company's National Account customers, revenue is recognized upon customer acceptance. National Account customers are large customers with centralized purchasing and geographically dispersed operations in multiple dealer territories. Reserves for discounts and returns are maintained for anticipated future claims. The accounting policies used to develop these product discounts and returns include:
Product discounts: The Company records estimated reductions to revenues for customer programs and incentive offerings, including special pricing agreements, price competition, promotions and other volume-based incentives. Lift truck sales revenue is recorded net of estimated discounts. The estimated discount amount is based upon historical trends for each lift truck model. In addition to standard discounts, dealers can also request additional discounts that allow them to offer price concessions to customers. From time to time, the Company offers special incentives to increase market share or dealer stock and offers certain customers volume rebates if a specified cumulative level of purchases is obtained. If estimates of customer programs and incentives were one percent higher than the levels offered during 2017, the reserves for product discounts would increase and revenue would be reduced by $4.7 million. The Company's past results of operations have not been materially affected by a change in the estimate of product discounts and although there can be no assurances, the Company is not aware of any circumstances that would be reasonably likely to materially change its estimates in the future.
Product returns: Products generally are not sold with the right of return with the exception of a small percentage of aftermarket parts. Based on historical experience, a portion of these aftermarket parts are estimated to be returned which, subject to certain terms and conditions, the Company will agree to accept. The Company records estimated reductions to revenues at the time of sale based on this historical experience and the limited right of return provided to certain customers. If future trends were to change significantly from those experienced in the past, incremental reductions to revenues may result based on this new experience. If the estimate of average return rates for these aftermarket parts were to increase by one percent over historical levels, the reserves for product returns would increase and revenues would be reduced by $0.2 million. The Company's past results of operations have not been materially affected by a change in the estimate of product returns and although there can be no assurances, the Company is not aware of any circumstances that would be reasonably likely to materially change its estimates in the future.
Product warranties: The Company provides for the estimated cost of product warranties at the time revenues are recognized. While the Company engages in extensive product quality programs and processes, including actively monitoring and evaluating the quality of component suppliers, the warranty obligation is affected by product failure rates, labor costs and replacement component costs incurred in correcting a product failure. If actual product failure rates, labor costs or replacement component costs differ from the Company's estimates, which are based on historical failure rates and consideration of known trends, revisions to the estimate of the cost to correct product failures would be required. If the estimate of the cost to correct product failures were to increase by one percent over 2017 levels, the reserves for product warranties would increase and additional expense of $0.2 million would be incurred. The Company's past results of operations have not been materially affected by a change in the estimate of product warranties and although there can be no assurances, the Company is not aware of any circumstances that would be reasonably likely to materially change the estimates in the future.
Retirement benefit plans:The Company maintains various defined benefit pension plans that provide benefits based on years of service and average compensation during certain periods. Pension benefits are frozen for all employees other than certain employees in the Netherlands. All other eligible employees, including employees whose pension benefits are frozen, receive retirement benefits under defined contribution retirement plans. The Company's policy is to periodically make contributions to fund the defined benefit pension plans within the range allowed by applicable regulations. The defined benefit pension plan assets consist primarily of publicly traded stocks and government and corporate bonds. There is no guarantee the actual return on the plans’ assets will equal the expected long-term rate of return on plan assets or that the plans will not incur investment losses.
The expected long-term rate of return on defined benefit plan assets reflects management’s expectations of long-term rates of return on funds invested to provide for benefits included in the projected benefit obligations. In establishing the expected long-term rate of return assumption for plan assets, the Company considers the historical rates of return over a period of time that is consistent with the long-term nature of the underlying obligations of these plans as well as a forward-looking rate of return. The historical and forward-looking rates of return for each of the asset classes used to determine the Company's estimated rate

Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)


of return assumption were based upon the rates of return earned or expected to be earned by investments in the equivalent benchmark market indices for each of the asset classes.
Expected returns for most of the Company's pension plans are based on a calculated market-related value of assets. Under this methodology, asset gains and losses resulting from actual returns that differ from expected returns are recognized in the market-related value of assets ratably over three years.
The basis for the selection of the discount rate for each plan is determined by matching the timing of the payment of the expected obligations under the defined benefit plans against the corresponding yield of high-quality corporate bonds of equivalent maturities.

The following illustrates the sensitivity of the net periodic benefit cost and projected benefit obligation to a 1% change in the discount rate or return on plan assets (in millions):
Assumption Change 
Increase (decrease)
2018 net pension expense
 
Increase (decrease)
2017 projected benefit obligation
Discount rate 1% increase $0.1 $(6.1)
  1% decrease (0.3) 6.7
Return on plan assets 1% increase (1.0) N/A
  1% decrease 1.0 N/A
See Note 9 to the consolidated financial statements in this Annual Report on Form 10-K for further discussion of the retirement benefit plans.
Long-lived assets, goodwill and intangible assets:Net property, plant and equipment, right-of-use ("ROU") assets, goodwill and net intangible assets at December 31, 20172019 were $265.4$308.5 million, $59.1$76.2 million, $106.7 million and $56.1$60.1 million, respectively. The Company makes estimates and assumptions in preparing the consolidated financial statements for which actual results will emerge over long periods of time. This includes the recoverability of long-lived assets employed in the business, including assets of acquired businesses. These estimates and assumptions are closely monitored and periodically adjusted as circumstances warrant. For instance, expected asset lives may be shortened or an impairment recorded based on a change in the expected use of the asset or performance of the related asset group.
The Company periodically evaluates long-lived assets, including intangible assets with finite lives, for impairment when changes in circumstances or the occurrence of certain events indicate the carrying amount of an asset may not be recoverable. Upon identification of indicators of impairment, assets and liabilities are grouped at the lowest level for which identifiable cash flows are largely independent of the cash flows of other assets or liabilities. The asset group would be considered impaired when the estimated future undiscounted cash flows generated by the asset group are less than carrying value. If the carrying value of an asset group is considered impaired, an impairment charge is recorded for the amount that the carrying value of the asset group exceeds its fair value. Fair value is estimated as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The determination of asset groups and the underlying cash flows requires the use of significant judgment.
The Company has intangible assets, including customer and contractual relationships, patents and technology, and trademarks. Intangible assets with a definite life are amortized over a period ranging from one to thirteentwenty years on a systematic and rational basis (generally straight line) that is representative of the asset’s use. Costs related to internally developed intangible assets, such as patents, are expensed as incurred and included in selling, general and administrative expenses.
During the fourth quarter of 2017, in connection with the preparation of the Company's annual operating plan for 2018 and longer-term forecast, the Company identified indicators of impairment at Nuvera due to the extension of time expected to commercialize Nuvera's products and the related length of time needed to achieve break-even operating results and positive cash flows. Accordingly, the Company performed an impairment analysis during the fourth quarter of 2017 of Nuvera's long-lived assets, including property, plant and equipment and intangible assets with finite lives. Based on this analysis, it was determined that the fair value of these assets was less than the respective carrying amounts of such assets, and accordingly, the Company recognized an impairment charge of $4.9 million in the Nuvera segment, which is included in selling, general and administrative expenses in the consolidated statement of operations. The impairment charge reduced property, plant, and

Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)


equipment by $3.7 million and intangible assets by $1.2 million. See Note 11 and Note 12 to the consolidated financial statements in this Annual Report on Form 10-K for further discussion of the impairment charge.

Intangible assets with an indefinite life, including certain trademarks, are not amortized. Indefinite-lived intangible assets are tested for impairment annually, and are tested for impairment between annual tests if an event occurs or circumstances change that would indicate that the carrying amount may be impaired. An impairment loss generally would be recognized when the fair value is less than the carrying value of the indefinite-lived intangible asset.


Of the $56.1$60.1 million of net intangible assets, $18.0$16.9 million relates to indefinite-lived trademarks, related to the acquisition of Bolzoni. The primary valuation technique used in estimating the fair value of indefinite-lived intangible assets is the present value of discounted cash flows. Specifically, a relief of royalty rate is applied to estimated sales, with the resulting amounts discounted using an appropriate discount rate of a market participant. The relief of royalty rate is the estimated royalty rate a market participant would pay to acquire the right to market and produce the product. If the resulting discounted cash flows are less than book value of the indefinite-lived intangible asset, an impairment exists and the asset would be adjusted to fair value. Based on impairment testing as of May 1, 2017,2019, no impairment was identified.


Goodwill is tested for impairment annually as of May 1 and is tested for impairment between annual tests if an event occurs or circumstances change that would indicate the carrying amount may be impaired. The Company completed the annual testing of impairment of goodwill as of May 1, 20172019 at the reporting unit level for the related goodwill. The Company uses either a qualitative or quantitative analysis to determine whether fair value exceeds carrying value. An estimate of the fair value of the reporting unit is determined through a combination of comparable market values for similar businesses and discounted cash flows. These estimates can change significantly based on such factors as the reporting unit's financial performance, economic

Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)


conditions, interest rates, growth rates, pricing, changes in business strategies and competition. Based on this testing, the fair value of each reporting unit was in excess of its carrying value and no impairment exists.
Factors which could result in future impairment charges include, but are not limited to, changes in worldwide economic conditions, changes in competitive conditions and customer preferences. These risk factors are discussed in Item 1A, "Risk Factors," of this Form 10-K. In addition, changes in the weighted average cost of capital could also impact impairment testing results. The Company will continue to monitor its reporting units and asset groups for any indicators of impairment.
Product liabilities: The Company provides for the estimated cost of personal and property damage relating to its products based on a review of historical experience and consideration of any known trends. Reserves are recorded for estimates of the costs for known claims and estimates of the costs of incidents that have occurred but for which a claim has not yet been reported, up to the stop-loss insurance coverage. While the Company engages in extensive product quality reviews and customer education programs, the product liability provision is affected by the number and magnitude of claims of alleged product-related injury and property damage and the cost to defend those claims. In addition, the estimates regarding the magnitude of claims are affected by changes in assumptions regarding medical costs, inflation rates and trends in damages awarded by juries. Changes in the assumptions regarding any one of these factors could result in a change in the estimate of the magnitude of claims. A one percent increase in the estimate of the number of claims or the magnitude of claims would increase the product liability reserve and reduce operating profit by approximately $0.2$0.1 million to $0.4$0.5 million. Although there can be no assurances, the Company is not aware of any circumstances that would be reasonably likely to materially change the estimates in the future.
Self-insurance liabilities: The Company is generally self-insured for product liability, environmental liability and medical and workers’ compensation claims. For product liability, catastrophic insurance coverage is retained for potentially significant individual claims. The Company also has insurance for certain historic product liability claims. An estimated provision for claims reported and for claims incurred but not yet reported under the self-insurance programs is recorded and revised periodically based on industry trends, historical experience and management judgment. In addition, industry trends are considered within management’s judgment for valuing claims. Changes in assumptions for such matters as legal judgments and settlements, legal defense costs, inflation rates, medical costs and actual experience could cause estimates to change in the near term. Changes in any of these factors could materially change the estimates for these self-insurance obligations causing a related increase or decrease in reported net operating results in the period of change in the estimate.
Deferred tax valuation allowancesProduct warranties: The Company recordsprovides for the estimated cost of product warranties at the time revenues are recognized. While the Company engages in extensive product quality programs and processes, including actively monitoring and evaluating the quality of component suppliers, the warranty obligation is affected by product failure rates, labor costs and replacement component costs incurred in correcting a valuation allowance to reduce its deferred tax assetsproduct failure. If actual product failure rates, labor costs or replacement component costs differ from the Company's estimates, which are based on historical failure rates and consideration of known trends, revisions to the estimate of the cost to correct product failures would be required. If the estimate of the cost to correct product failures were to increase by one percent over 2019 levels, the reserves for product warranties would increase and additional expense of $0.3 million would be incurred. The Company's past results of operations have not been materially affected by a change in the estimate of product warranties and although there can be no assurances, the Company is not aware of any circumstances that would be reasonably likely to materially change the estimates in the future.
Revenue recognition: Revenue is recognized when obligations under the terms of a contract with the customer are satisfied which occurs when control of products or services are transferred to the customer. Revenue is measured as the amount that is more likely than notof consideration expected to be realized. A valuation allowance has been provided against certain deferred tax assets relatedreceived in exchange for transferring goods or providing services. The satisfaction of performance obligations under the terms of a revenue contract generally gives rise for the right to payment from the customer. The Company's standard payment terms vary by the type and location of the customer and the products or services offered. Generally, the time between when revenue is recognized and when payment is due is not significant. Given the insignificant days between revenue recognition and receipt of payment, financing components do not exist between the Company and its customers. Taxes collected from customers are excluded from revenue. The estimated costs of product warranties are recognized as expense when the products are sold. See Note 16 for further information on product warranties.

The majority of the Company's sales contracts contain performance obligations satisfied at a point in time when title and risks and rewards of ownership have transferred to the customer. Revenue for service contracts are recognized as the services are provided.

Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




For contracts with customers that include multiple performance obligations, judgment is required to non-U.S.determine whether performance obligations specified in these contracts are distinct and U.S. state jurisdictionsshould be accounted for as separate revenue transactions for recognition purposes. For such arrangements, revenue is allocated to each performance obligation based on its relative standalone selling price. Standalone selling prices are generally determined based on the prices charged to customers or using expected cost plus margin. Impairment losses recognized on receivables or contract assets were not significant for the year ended December 31, 2019.

The Company generally expenses sales commissions when incurred because the amortization period would have been one year or less. These costs are reported on the line "Selling, general and administrative expenses" in the Consolidated Statements of Operations.

The Company pays for shipping and handling activities regardless of when control is transferred and has elected to account for shipping and handling as activities to fulfill the promise to transfer the good, rather than a promised service. These costs are reported on the line “Cost of sales” in the Consolidated Statements of Operations.
Retirement benefit plans:The Company maintains various defined benefit pension plans that provide benefits based on years of service and average compensation during certain periods. Pension benefits are frozen for all employees other than certain employees in the Netherlands. All other eligible employees, including net operatingemployees whose pension benefits are frozen, receive retirement benefits under defined contribution retirement plans. The Company's policy is to periodically make contributions to fund the defined benefit pension plans within the range allowed by applicable regulations. The defined benefit pension plan assets consist primarily of publicly traded stocks and capital loss carryforwards. Management believesgovernment and corporate bonds. There is no guarantee the valuation allowances are adequate after considering future taxable income, allowable carryback and carryforward periods, reversing taxable temporary differences and ongoing prudent and feasible tax planning strategies.actual return on the plans’ assets will equal the expected long-term rate of return on plan assets or that the plans will not incur investment losses.
The expected long-term rate of return on defined benefit plan assets reflects management’s expectations of long-term rates of return on funds invested to provide for benefits included in the projected benefit obligations. In establishing the eventexpected long-term rate of return assumption for plan assets, the Company wasconsiders the historical rates of return over a period of time that is consistent with the long-term nature of the underlying obligations of these plans as well as a forward-looking rate of return. The historical and forward-looking rates of return for each of the asset classes used to determine that it wouldthe Company's estimated rate of return assumption were based upon the rates of return earned or expected to be able to realize the deferred tax assetsearned by investments in the futureequivalent benchmark market indices for each of the asset classes.
Expected returns for most of the Company's pension plans are based on a calculated market-related value of assets. Under this methodology, asset gains and losses resulting from actual returns that differ from expected returns are recognized in excessthe market-related value of assets ratably over three years.
The basis for the selection of the discount rate for each plan is determined by matching the timing of the payment of the expected obligations under the defined benefit plans against the corresponding yield of high-quality corporate bonds of equivalent maturities.

The following illustrates the sensitivity of the net recorded amount (includingperiodic benefit cost and projected benefit obligation to a 1% change in the valuation allowance), an adjustmentdiscount rate or return on plan assets (in millions):
Assumption Change 
Increase (decrease)
2020 net pension expense
 
Increase (decrease)
2019 projected benefit obligation
Discount rate 1% increase $(0.2) $(31.8)
  1% decrease 0.5 36.3
Return on plan assets 1% increase (2.2) N/A
  1% decrease 2.2 N/A
A change in life expectancy by one year would result in a $7.7 million change in the 2019 projected benefit obligation.
See Note 10 to the valuation allowance would increase income in the period such determination was made. Conversely, should the Company determine that it would not be able to realize all or part of the net deferred tax asset in the future, an adjustment to the valuation allowance would be expensed in the period such determination was made. See "Financial Review - Income Taxes" and Note 6 to the Consolidated Financial Statementsconsolidated financial statements in this Annual Report on Form 10-K for further discussion of the Company's income taxes.retirement benefit plans.
Inventory reserves: The Company writes down inventory to the lower of cost or net realizable value, which includes an estimate for obsolescence or excess inventory based upon assumptions about future demand and market conditions. If actual market conditions are less favorable than those projected by management, additional inventory write-downs may be required. Upon a subsequent sale or disposal of the impaired inventory, the corresponding reserve for impaired value is relieved to ensure that the cost basis of the inventory reflects any write-downs. An impairment in value of one percent of net inventories would result in additional expense of approximately $4.1 million.
Allowances for doubtful accounts: The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of customers to make required payments. These allowances are based on both recent trends of certain customers estimated to be a greater credit risk as well as general trends of the entire customer pool. If the financial condition of customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. An impairment in value of one percent of net accounts receivable would require an increase in the allowance for doubtful accounts and would result in additional expense of approximately $4.6 million.

CONSOLIDATED FINANCIAL REVIEW
The following table identifies the components of change for 2017 compared with 2016 by segment:
  Revenues Gross Profit Operating Profit Net Income Attributable to Stockholders
2016 $2,569.7
 $427.5
 $34.9
 $42.8
Increase (decrease) in 2017        
Americas 158.4
 46.7
 35.6
 8.8
EMEA 100.1
 6.2
 1.4
 (4.1)
JAPIC 4.4
 3.1
 0.6
 0.2
Lift truck business 262.9
 56.0
 37.6
 4.9
Bolzoni 61.6
 19.1
 6.5
 4.2
Nuvera 1.2
 0.6
 (2.4) (2.9)
Eliminations (10.2) (0.6) (0.6) (0.4)
2017 $2,885.2
 $502.6
 $76.0
 $48.6



Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




CONSOLIDATED FINANCIAL REVIEW
The following table identifies the components of change for 2019 compared with 2018 by segment:
  Revenues Gross Profit Operating Profit Net Income Attributable to Stockholders
2018 $3,179.1
 $497.0
 $38.8
 $34.7
Increase (decrease) in 2019        
Americas 135.8
 40.5
 13.4
 7.7
EMEA (17.6) 7.7
 4.1
 2.7
JAPIC 7.6
 7.6
 0.6
 (8.8)
Lift truck business 125.8
 55.8
 18.1
 1.6
Bolzoni (3.6) (5.6) (4.8) (3.0)
Nuvera (6.9) (5.2) 2.0
 2.7
Eliminations (2.6) (0.2) (0.2) (0.2)
2019 $3,291.8
 $541.8
 $53.9
 $35.8

FINANCIAL REVIEW
The segment and geographic results of operations for the Company were as follows for the year ended December 31:
      Favorable / (Unfavorable) % Change      Favorable / (Unfavorable) % Change
2017 2016 2015 2017 vs. 2016 2016 vs. 20152019 2018 2017 2019 vs. 2018 2018 vs. 2017
Lift truck unit shipments (in thousands)                  
Americas58.4
 54.4
 56.8
 7.4 % (4.2)%59.3
 61.1
 58.4
 (2.9)% 4.6 %
EMEA28.9
 24.6
 23.8
 17.5 % 3.4 %28.4
 30.0
 28.9
 (5.3)% 3.8 %
JAPIC6.1
 5.8
 6.3
 5.2 % (7.9)%
JAPIC(1)
12.6
 10.8
 6.1
 16.7 % 77.0 %
93.4
 84.8
 86.9
 10.1 % (2.4)%100.3
 101.9
 93.4
 (1.6)% 9.1 %
Revenues                  
Americas$1,834.1
 $1,675.7
 $1,775.5
 9.5 % (5.6)%$2,123.3
 $1,987.5
 $1,834.1
 6.8 % 8.4 %
EMEA715.8
 615.7
 606.4
 16.3 % 1.5 %751.2
 768.8
 715.8
 (2.3)% 7.4 %
JAPIC173.9
 169.5
 193.7
 2.6 % (12.5)%
JAPIC(1)
249.7
 242.1
 173.9
 3.1 % 39.2 %
Lift truck business2,723.8
 2,460.9
 2,575.6
 10.7 % (4.5)%3,124.2
 2,998.4
 2,723.8
 4.2 % 10.1 %
Bolzoni (1)
177.2
 115.6
 
 53.3 % n.m.
Bolzoni345.4
 349.0
 312.5
 (1.0)% 11.7 %
Nuvera3.7
 2.5
 2.5
 48.0 % n.m.
10.1
 17.0
 3.7
 n.m.
 n.m.
Eliminations(19.5) (9.3) 
 n.m.
 n.m.
(187.9) (185.3) (154.8) n.m.
 n.m.
$2,885.2
 $2,569.7
 $2,578.1
 12.3 % (0.3)%$3,291.8
 $3,179.1
 $2,885.2
 3.5 % 10.2 %
Gross profit (loss)                  
Americas$334.6
 $287.9
 $308.1
 16.2 % (6.6)%$354.8
 $314.3
 $334.6
 12.9 % (6.1)%
EMEA95.7
 89.5
 101.3
 6.9 % (11.6)%110.5
 102.8
 95.7
 7.5 % 7.4 %
JAPIC20.2
 17.1
 23.2
 18.1 % (26.3)%
JAPIC(1)
29.7
 22.1
 20.2
 34.4 % 9.4 %
Lift truck business450.5
 394.5
 432.6
 14.2 % (8.8)%495.0
 439.2
 450.5
 12.7 % (2.5)%
Bolzoni (1)
54.8
 35.7
 
 53.5 % n.m.
58.1
 63.7
 54.8
 (8.8)% 16.2 %
Nuvera(2.1) (2.7) (1.8) (22.2)% n.m.
(11.2) (6.0) (2.1) (86.7)% (185.7)%
Eliminations(0.6) 
 
 n.m.
 n.m.
(0.1) 0.1
 (0.6) n.m.
 n.m.
$502.6
 $427.5
 $430.8
 17.6 % (0.8)%$541.8
 $497.0
 $502.6
 9.0 % (1.1)%
Selling, general and administrative expenses         
Americas$225.3
 $214.2
 $191.2
 (5.2)% (12.0)%
EMEA86.7
 81.9
 88.3
 (5.9)% 7.2 %
JAPIC26.3
 23.8
 25.0
 (10.5)% 4.8 %
Lift truck business338.3
 319.9
 304.5
 (5.8)% (5.1)%
Bolzoni (1)
48.4
 35.8
 
 (35.2)% n.m.
Nuvera39.9
 36.9
 22.8
 (8.1)% n.m.
$426.6
 $392.6
 $327.3
 (8.7)% (20.0)%


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




      Favorable / (Unfavorable) % Change      Favorable / (Unfavorable) % Change
2017 2016 2015 2017 vs. 2016 2016 vs. 20152019 2018 2017 2019 vs. 2018 2018 vs. 2017
Selling, general and administrative expenses         
Americas$266.0
 $238.9
 $225.0
 (11.3)% (6.2)%
EMEA99.8
 96.2
 88.9
 (3.7)% (8.2)%
JAPIC(1)
43.6
 36.6
 26.3
 (19.1)% (39.2)%
Lift truck business409.4
 371.7
 340.2
 (10.1)% (9.3)%
Bolzoni53.4
 54.2
 48.4
 1.5 % (12.0)%
Nuvera25.1
 32.3
 39.9
 22.3 % 19.0 %
$487.9
 $458.2
 $428.5
 (6.5)% (6.9)%
Operating profit (loss)                  
Americas$109.3
 $73.7
 $116.9
 48.3 % (37.0)%$88.8
 $75.4
 $109.6
 17.8 % (31.2)%
EMEA9.0
 7.6
 13.0
 18.4 % (41.5)%10.7
 6.6
 6.8
 62.1 % (2.9)%
JAPIC(6.1) (6.7) (1.8) 9.0 % n.m.
JAPIC(1)
(13.9) (14.5) (6.1) 4.1 % (137.7)%
Lift truck business112.2
 74.6
 128.1
 50.4 % (41.8)%85.6
 67.5
 110.3
 26.8 % (38.8)%
Bolzoni (1)
6.4
 (0.1) 
 n.m.
 n.m.
Bolzoni4.7
 9.5
 6.4
 (50.5)% 48.4 %
Nuvera(42.0) (39.6) (24.6) (6.1)% n.m.
(36.3) (38.3) (42.0) 5.2 % 8.8 %
Eliminations(0.6) 
 
 n.m.
 n.m.
(0.1) 0.1
 (0.6) n.m.
 n.m.
$76.0
 $34.9
 $103.5
 117.8 % (66.3)%$53.9
 $38.8
 $74.1
 38.9 % (47.6)%
                  
Interest expense$14.6
 $6.7
 $4.7
 (117.9)% (42.6)%$19.8
 $16.0
 $14.6
 (23.8)% (9.6)%
Other income$(32.4) $(10.1) $(5.7) 220.8 % 77.2 %$(13.8) $(13.8) $(34.3)  % (59.8)%
Income before income taxes$93.8
 $38.3
 $104.5
 144.9 % (63.3)%$47.9
 $36.6
 $93.8
 30.9 % (61.0)%
Net income (loss) attributable to stockholders                  
Americas$68.4
 $59.6
 $76.3
 14.8 % (21.9)%$61.2
 $53.5
 $68.4
 14.4 % (21.8)%
EMEA5.3
 9.4
 10.6
 (43.6)% (11.3)%9.0
 6.3
 5.3
 42.9 % 18.9 %
JAPIC(1.9) (2.1) 2.4
 9.5 % (187.5)%
JAPIC(1)
(11.9) (3.1) (1.9) (283.9)% (63.2)%
Lift truck business71.8
 66.9
 89.3
 7.3 % (25.1)%58.3
 56.7
 71.8
 2.8 % (21.0)%
Bolzoni (1)
3.9
 (0.3) 
 n.m.
 n.m.
Bolzoni2.8
 5.8
 3.9
 (51.7)% 48.7 %
Nuvera(26.7) (23.8) (14.6) (12.2)% n.m.
(25.2) (27.9) (26.7) 9.7 % (4.5)%
Eliminations(0.4) 
 
 n.m.
 n.m.
(0.1) 0.1
 (0.4) n.m.
 n.m.
$48.6
 $42.8
 $74.7
 13.6 % (42.7)%$35.8
 $34.7
 $48.6
 3.2 % (28.6)%
Diluted earnings per share$2.94
 $2.61
 $4.57
 12.6 % (42.9)%$2.14
 $2.09
 $2.94
 2.4 % (28.9)%
Reported income tax rate47.9% n.m.
 28.1%    23.6% 6.3% 47.9%    
(1) Bolzoni was acquired on April 1, 2016 and results of operations have been included since the acquisition date.
(1) Maximal was acquired on June 1, 2018 and results of operations have been included since the acquisition date.
(1) Maximal was acquired on June 1, 2018 and results of operations have been included since the acquisition date.
n.m. - not meaningful
Following is the detail of the Company's unit shipments, bookings and backlog of unfilled orders placed with its manufacturing and assembly operations for new lift trucks, reflected in thousands of units. As of December 31, 2017, substantially all of the Company's backlog is expected to be sold within the next twelve months.
  YEAR ENDED NINE MONTHS ENDED YEAR ENDED
  December 31, 2017 September 30, 2017 December 31, 2016
Unit backlog, beginning of period 30.7
 30.7
 26.9
Unit shipments (93.4) (67.5) (84.8)
Unit bookings 96.5
 71.9
 88.6
Unit backlog, end of period 33.8
 35.1
 30.7


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




Following is the detail of the Company's unit shipments, bookings and backlog of unfilled orders placed with its manufacturing and assembly operations for new lift trucks, reflected in thousands of units. As of December 31, 2019, substantially all of the Company's backlog is expected to be sold within the next twelve months.
  YEAR ENDED NINE MONTHS ENDED YEAR ENDED
  December 31, 2019 September 30, 2019 December 31, 2018
Unit backlog, beginning of period 43.9
 43.9
 33.8
Unit shipments (100.3) (75.5) (101.9)
Unit bookings 97.6
 75.0
 112.0
Unit backlog, end of period 41.2
 43.4
 43.9
The following is the detail of the approximate sales value of the Company's lift truck unit bookings and backlog, reflected in millions of dollars. The dollar value of bookings and backlog is calculated using the current unit bookings and backlog and the forecasted average sales price per unit.
 YEAR ENDED NINE MONTHS ENDED YEAR ENDED YEAR ENDED NINE MONTHS ENDED YEAR ENDED
 December 31, 2017 September 30, 2017 December 31, 2016 December 31, 2019 September 30, 2019 December 31, 2018
Bookings, approximate sales value $2,260
 $1,645
 $2,000
 $2,240
 $1,690
 $2,600
Backlog, approximate sales value $860
 $860
 $740
 $1,070
 $1,130
 $1,190
20172019 Compared with 20162018
The following table identifies the components of change in revenues for 20172019 compared with 2016:2018:
 Revenues Revenues
2016 $2,569.7
Increase (decrease) in 2017 from:  
2018 $3,179.1
Increase (decrease) in 2019 from:  
Unit price 115.9
Other 29.6
Maximal revenues 23.9
Parts 6.8
Unit volume and product mix 206.5
 (0.5)
Bolzoni revenues  (3.6)
First quarter 2017$41.6
 
Increase in comparable periods20.0
61.6
Parts 25.7
Unit price 23.1
Nuvera revenues (6.9)
Foreign currency 12.4
 (52.5)
Nuvera revenues 1.2
Other (15.0)
2017 $2,885.2
2019 $3,291.8


Revenues increased 12.3%3.5% to $2,885.2$3,291.8 million in 20172019 from $2,569.7$3,179.1 million in 2016.2018. The increase was mainly attributabledue to improved pricing to offset material cost increases and tariffs, increased other revenue related to higher unitsales of attachments and parts volumes and a decrease in deal-specific pricing in the lift truck business in 2017 compared with 2016.acquisition of Hyster-Yale Maximal. These items were partially offset by unfavorable currency movements from the translation of sales into U.S. dollars.


Revenues in the Americas increased in 2017 from 20162019 compared with 2018 primarily as a result of improved pricing, increased unit shipments of higher-priced trucks. Revenues increased primarily fromother revenue related to higher sales of the Company's new Class 5 internal combustion engine standard truckattachments and increased sales of higher-capacity, 3.5higher parts sales. The higher pricing was implemented to 8 ton, Class 5 trucks, as well as Class 1offset material cost increases and Class 2 electric trucks. In addition, a decrease in deal-specific pricing and an increase in parts sales also contributed to the increase in revenues in 2017 compared with 2016.tariffs.


EMEA's revenues improved in 2017 from 2016decreased mainly as a result of unfavorable currency movements of $40.8 million from the translation of sales into U.S. dollars, partially offset by improved pricing and increased unit shipments primarily related to shipments of the new Class 5 internal combustion engine standard truck and an increase in shipments of Class 1 electric-riderhigher-priced lift trucks.
The following table identifies the components of change in operating profit for 2017 compared with 2016:
 Operating Profit
2016$34.9
Increase (decrease) in 2017 from: 
Lift truck gross profit55.4
Bolzoni operations6.5
Nuvera operations(2.4)
Lift truck selling, general and administrative expenses(18.4)
2017$76.0


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




Revenues in JAPIC increased primarily as a result of a full year of Hyster-Yale Maximal revenues during 2019 and only seven months subsequent to the acquisition date in 2018. This was partially offset by unfavorable foreign currency movements of $6.3 million from the translation of sales into U.S. dollars.

The decrease in Bolzoni's revenues was mainly due to unfavorable foreign currency movements of $10.7 million from the translation of sales into U.S. dollars, partially offset by higher volume.

Nuvera's revenues decreased in 2019 compared to 2018 primarily as a result of revenue recognized in the fourth quarter of 2018 which had previously been deferred related to battery box replacement ("BBRs"). For periods prior to the fourth quarter of 2018, Nuvera deferred revenue on its BBRs because of an inability to estimate future costs, including warranty. The Company established a warranty reserve and began recognizing revenue in the fourth quarter of 2018. The decrease was partially offset by an increase in development funding received associated with third-party development agreements.
The following table identifies the components of change in operating profit for 2019 compared with 2018:
 Operating Profit
2018$38.8
Increase (decrease) in 2019 from: 
Lift truck gross profit55.6
Lift truck selling, general and administrative expenses(37.7)
Nuvera operations2.0
Bolzoni operations(4.8)
2019$53.9

The Company recognized operating profit of $76.0$53.9 million in 20172019 compared with $34.9$38.8 million in 2016.2018. The increase in operating profit was primarilymainly due to higher lift truck gross profit partially offset by an increase inhigher lift truck selling, general and administrative expenses. The increase in the lift truck gross profit was primarily due to higher unit shipments and related production efficiencies as well as improved pricing, net of material cost inflation.


Operating profit in the Americas increased in 20172019 compared with 20162018 primarily as a result of improved gross profit mainly due to higher unit shipments of higher-priced lift trucks and related production efficiencies, as well as improved pricing, net of material cost inflation. In addition, selling, general and administrative expenses in the Americas increased in 2017 compared with the 2016 primarily due to higher employee-related costs and increased costs for development and marketing of new products, partially offset by lower acquisition-related costs.

Operating profit in EMEA increased in 2017 compared with 2016 as a result of improved gross profit partially offset by higher selling, general and administrative expensesexpenses. The increase in gross profit was mainly from higher marketing and employee-related costs. Gross profitattributable to improved primarily from higher unit shipments and the favorable impact ofpricing. These increases were offset by unfavorable foreign currency movements, of $4.4 million. The improvement washigher material cost from aluminum and steel tariffs, partially offset by material cost inflation.

Bolzoni's operating profit improved in 2017 from 2016 primarily due to the absence of $2.7 million of one-time purchase accounting adjustments recorded in 2016 and higher gross profit from higher sales in the comparable second, third and fourth quarters of 2017 compared with 2016. Operating profit in the first quarter of 2017 was $2.3 million.

During 2017, Nuvera's operating loss increased $2.4 million compared with 2016, mainly due to an impairment charge of $4.9 million recorded in 2017 on Nuvera's long-lived assets. Increased employee-related costs, professional fees and other general operating expenses also contributed to the increase in operating loss. These items were partially offset by lower product development and production start-up expenses. See Note 11 and Note 12 to the consolidated financial statements in this Annual Report on Form 10-K for further discussion of the impairment charge.

The Company recognized net income attributable to stockholders of $48.6 million in 2017 compared with $42.8 million in 2016. The increase was primarily the result of the increase in lift truck operating profit and $19.8$11.8 million of favorable HYGFS equity income in 2017 related to the Tax Cutsretroactive tariff exclusion adjustments for direct imports and Jobs Act (the “Tax Reform Act”), which is reflected in “Income from Unconsolidated Affiliates” in the Consolidated Statement of Operations. These items were partially offset by income tax expense of $38.2 million in 2017 due to the Tax Reform Act. See "Financial Review - Income Taxes" and Note 6 to the consolidated financial statements in this Annual Report on Form 10-Ksuppliers for further discussion of income taxes.

2016 Compared with 2015
The following table identifies thecertain components of change in revenues for 2016 compared with 2015:
 Revenues
2015$2,578.1
Increase (decrease) in 2016 from: 
Unit volume and product mix(84.1)
Unit price(27.3)
Foreign currency(20.1)
Bolzoni revenues115.6
Other5.6
Parts1.9
2016$2,569.7

Revenues decreased slightly to $2,569.7 million in 2016imported from $2,578.1 million in 2015. The decrease in the lift truck business was mainly due to lower unit volumes, the unfavorable effect of deal-specific selling prices andChina, higher manufacturing costs, a shift in sales to lower-priced liftlower-margin trucks during 2016and lower unit sales volume. Selling, general and administrative expenses increased mainly from higher sales and product development costs to support the Company's strategic initiatives, increased employee-related expenses and higher product liability expense, partially offset by the absence of Maximal acquisition-related costs incurred in 2018.

EMEA's operating profit increased in 2019 compared with 2015. Revenues at non-U.S. locations were also unfavorably affected2018 primarily as a result of higher gross profit due to price increases, net of higher material costs. The increase was partially offset by higher selling, general and administrative expenses primarily to support the strong U.S.business and its strategic initiatives and unfavorable foreign currency movements.


The operating loss in JAPIC decreased slightly mainly due to a full year of Hyster-Yale Maximal gross profit during 2019 compared with only seven months subsequent to the acquisition date in 2018, which included $4.0 million of unfavorable one-time purchase accounting adjustments made in the third quarter of 2018 associated with the acquisition.

Bolzoni's operating profit decreased mainly as a result of $2.5 million of restructuring costs in 2019 related to the transfer of Bolzoni's North America attachment manufacturing to Sulligent, Alabama and unfavorable foreign currency movements. The restructuring costs include plant rearrangement, changes to information technology infrastructure and severance expenses.

Nuvera's operating loss decreased compared with the prior year mainly as a result of increased product development funding received from third-parties.


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




dollar during 2016The Company recognized net income attributable to stockholders of $35.8 million in 2019 compared with 2015.$34.7 million in 2018. The declineincrease was primarily the result of higher operating profit and favorable mark-to-market adjustments on an equity investment in lift truck revenue wasa third-party. These items were partially offset by the absence of favorable tax adjustments related to the Tax Reform Act in 2018 and higher interest expense from higher borrowing levels during 2019 compared with 2018. See "Financial Review - Income Taxes" and Note 7 to the consolidated financial statements in this Annual Report on Form 10-K for further discussion of income taxes.
2018 Compared with 2017
The following table identifies the components of change in revenues for 2018 compared with 2017:
  Revenues
2017 $2,885.2
Increase in 2018 from:  
Unit volume and product mix 94.6
Maximal revenues 48.9
Parts 36.2
Unit price 35.4
Foreign currency 29.5
Bolzoni revenues 36.5
Other (0.5)
Nuvera revenues 13.3
2018 $3,179.1

Revenues increased 10.2% to $3,179.1 million in 2018 from $2,885.2 million in 2017. The increase was mainly due to higher unit and parts volume, favorable currency movements and improved pricing to offset material cost increases in the lift truck business. In addition, the acquisition of Maximal and increased Bolzoni revenues sincealso contributed to the acquisition on April 1, 2016.improvement in revenues.


Revenues in the Americas declinedincreased primarily as a result of increased unit shipments. Revenues increased primarily from higher sales of Class 4 and Class 5 internal combustion engine lift trucks, including the XT/MX standard truck and Big Trucks. In addition, increased parts volume and improved pricing to offset material cost increases also contributed to the increase in 2016America's revenues.

EMEA's revenues increased mainly as a result of favorable currency movements of $36.6 million from 2015the translation of sales into U.S. dollars and increased parts volume and improved pricing to offset material cost increases.

Revenues in JAPIC increased primarily as a result of the reduction inacquisition of Maximal, higher unit shipments and the unfavorable effect of deal-specific pricing in North America. In addition, unfavorableparts volume, and favorable currency movements of $4.4 million from the translation of Brazilian sales into U.S. dollars, which strengthened against the Brazilian real, contributed to the decline in revenues.

EMEA's revenues increased in 2016 from 2015 mainly as a result of higher lift truck volumes, partially offset by unfavorable currency movements of $15.5$1.9 million from the translation of sales into U.S. dollars.


Revenues in JAPIC declined in 2016 compared with 2015. The decrease was primarily the result of fewer unit shipments, the unfavorable effect of lower pricing of trucks and a shift in sales to lower-priced products in 2016 compared with 2015.
The following table identifies the components of change in operating profit for 2016 compared with 2015:
 Operating Profit
2015$103.5
Decrease in 2016 from: 
Lift truck gross profit(38.1)
Lift truck selling, general and administrative expenses(15.4)
Nuvera operations(15.0)
Bolzoni operations(0.1)
2016$34.9

The Company recognized operating profit of $34.9 million in 2016 compared with operating profit of $103.5 million in 2015.

The overall decrease in the lift truck business operating profit was primarily due to lower gross profit and higher selling, general and administrative expenses. Gross profit decreasedBolzoni's revenues increased mainly as a result of the unfavorable effect of lower pricing, reduced sales volumes, which led to higher manufacturing variances, unfavorable foreign currency movements of $15.9 million and increased U.S. health care costs. The decrease in gross profit was partially offset by continued material cost deflation of $28.6 million during 2016 compared with 2015. Selling, general and administrative expenses increased in 2016 compared with 2015 mainly due to acquisition-related costs of $6.6 million, higher product development and marketing-related expenses, and increased U.S. health care costs. Favorable foreign currency movements of $5.5 million and lower incentive compensation estimates partially offset the increase in selling, general and administrative expenses.

Operating profitvolume in the Americas decreased in 2016 compared with 2015 primarily as a result of higher selling, general and administrative expenses mainly from $6.6 million of acquisition-related costs, increased marketing-related expenses, a $3.1 million estimated loss on recovery of assets for recourse obligations, increased product development expenses and increased U.S. health care costs. Gross profit also decreased primarily as a result of the effect of lower product pricing, reduced sales volumes, which led to higher manufacturing variances, and increased U.S. health care costs. The decrease in gross profit was partially offset by continued material cost deflation of $20.5 millionEMEA market and favorable foreign currency movements of $8.3 million during 2016 compared with 2015.$10.2 million.


Operating profit in EMEA declined in 2016 compared with 2015 mainly as a resultDuring the fourth quarter of lower gross profit partially offset by lower selling, general and administrative expenses. Gross profit declined primarily from unfavorable currency movements of $20.3 million, lower product pricing and higher warranty-related expenses. The decrease in gross profit was partially offset by material cost deflation of $8.6 million, a shift in sales2018, Nuvera recognized revenue which had previously been deferred related to higher-margin products and higherBBR units and parts volumes. Selling, general and administrative expenses decreased primarily due to favorable foreign currency movementsthe inability to estimate total future warranty costs. The BBRs are new technology and the design of $3.4 million and lower marketing and bad debt expensethe product continues to evolve. The Company determined sufficient data was available in 2016 compared with 2015.the fourth quarter of 2018 to reasonably estimate the future costs related to the sale of BBR units, including warranty costs, which were also recorded during the fourth quarter of 2018.


The operating loss in JAPIC increased in 2016 compared with 2015 mainly as a result of lower gross profit from unfavorable currency movements of $3.9 million and lower product pricing.


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




The following table identifies the components of change in operating profit for 2018 compared with 2017:
 Operating Profit
2017$74.1
Increase (decrease) in 2018 from: 
Lift truck selling, general and administrative expenses(31.5)
Lift truck gross profit(10.6)
Nuvera operations3.7
Bolzoni operations3.1
2018$38.8

The Company recognized operating profit of $38.8 million in 2018 compared with $74.1 million in 2017. The decrease in operating profit was mainly due to an increase in lift truck selling, general and administrative expenses primarily related to employee-related costs for sales and development of new products and the acquisition of Maximal in 2018. Lift truck gross profit decreased mainly as a result of higher material and manufacturing costs, partially offset by improved pricing and higher unit and parts shipments in 2018.

Operating profit in the Americas decreased primarily as a result of lower gross profit and higher selling, general and administrative expenses. The decrease in gross profit was mainly due to material and freight cost inflation and tariffs, net of price increases. The Americas implemented price increases during the first half of the year to offset higher than planned material cost inflation and aluminum and steel tariffs. However, operating results continue to reflect the lag of a $25.7 million shortfall in 2018 between fully realizing those price increases and when the tariffs and material cost increases were first realized. Selling, general and administrative expenses increased mainly from higher employee-related costs for sales and development of new products, as well as higher acquisition-related expenses.

EMEA's operating profit was flat due to higher gross profit from favorable currency movements of $12.3 million and improved pricing, which was partially offset by higher material and manufacturing cost inflation. The increase in gross profit was offset by higher selling, general and administrative expenses, including $2.6 million of unfavorable foreign currency movements and higher sales costs to support the Company's strategic initiatives.

The operating loss in JAPIC increased mainly as a result of increased selling, general and administrative expenses primarily from expenses incurred at Maximal since the date of acquisition and higher sales costs to support the Company's strategic initiatives.

Bolzoni's operating profit improved primarily due to higher gross profit, partially offset by higher selling, general and administrative expenses.

Nuvera's operating loss increaseddecreased in 20162018 from 20152017 primarily due to an increasehigher product development funding from third-party customers and the absence of $13.7the 2017 impairment charge of $4.9 million inon Nuvera's long-lived assets. This was partially offset by higher development and production start-up expenses including unfavorable inventory adjustments to reflect current selling prices. Nuvera's costs associated with producing prototype and early production components at low volumes also contributed to the higherfor its third-party development expenses during 2016. In addition, Nuvera had increased marketing and employee-related costs as it continues transitioning from product development to commercialization and production.agreements.


The Company recognized net income attributable to stockholders of $42.8$34.7 million in 20162018 compared with $74.7$48.6 million in 2015.2017. The decrease was primarily the result of the decrease inlower operating profit, the effect of the favorable HYGFS equity income in 2017 related to the Tax Reform Act and unfavorable mark-to-market adjustments on an equity investment in a third-party. This decrease was partially offset by a decreasechanges in discrete tax adjustments in the reported income tax rate in 20162018 compared with 2015.2017. See "Financial Review - Income Taxes" and Note 67 to the consolidated financial statements in this Annual Report on Form 10-K for further discussion of income taxes.


Income taxes
The income tax provision includes U.S. federal, state and local, and non-U.S. income taxes. In determining the effective income tax rate, the Company analyzes various factors, including annual earnings, the laws of taxing jurisdictions in which the earnings will bewere generated, the impact of state and local income taxes, the ability to use tax credits, net operating loss and capital

Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)


loss carryforwards, and available tax planning alternatives. Discrete items, including the effect of changes in tax laws, tax rates, and certain items with respect to valuation allowances or other unusual or non-recurring tax adjustments are reflected in the interim period in which they occur.
Deferred tax assets and liabilities are recognized based on the future tax consequences attributable to temporary differences that exist between the financial statement carrying value of assets and liabilities and their respective tax bases, and operating loss and tax credit carryforwards on a taxing jurisdiction basis. The Company measures deferred tax assets and liabilities using enacted tax rates that will apply in the years in which it expects the temporary differences to be recovered or paid.
The authoritative guidance for income taxes requires a reduction of the carrying amounts of deferred tax assets by recording a valuation allowance if, based on the available evidence, it is more likely than not (defined as a likelihood of more than 50%) such assets will not be realized. The valuation of deferred tax assets requires judgment in assessing the likely future tax consequences of events that have been recognized in the Company's financial statements or tax returns and future profitability. The Company's accounting for deferred tax consequences represents its best estimate of those future events. Changes in the Company's estimates, due to unanticipated events or otherwise, could have a material effect on its financial condition and results of operations. The Company continually evaluates its deferred tax assets to determine if a valuation allowance is required.
On December 22, 2017, the President of the United States signed into law the Tax Cuts and Jobs Act (the “Tax Reform Act”).Act. The Tax Reform Act significantly revised the U.S. corporate income tax regime by, among other things, lowering the U.S. corporate income tax rate from 35% to 21% effective January 1, 2018, repealing the deduction for domestic production activities, allowing the immediate expensing of certain qualified capital expenditures, implementing a territorial tax system and imposing a one-time transition tax on certain unremitted earnings of non-U.S. subsidiaries. As a result of the Tax Reform Act in 2017, the Company recorded the provisional tax effects of $38.2 million, comprised of $33.1 million of tax expense due to the transition tax on the unremitted earnings and profits of non-U.S. subsidiaries and $5.1 million of tax expense due to the effects on the Company’s deferred tax assets and liabilities. The final amounts recorded in subsequent financial statements may materially differ from these provisional amounts due to among other things, additional analysis, changes in interpretationsliabilities as of the Tax Reform Act including interpretations by state and local taxing authorities and related assumptions of the Company, and additional regulatory guidance that may be issued which could potentially effect the measurement of these provisional tax amounts. The provisional amounts are expected to be finalized when the U.S. corporate income tax return for 2017 is filed in 2018, but in no event later than one year from the enactment date.

The one-time transition tax is based on the post-1986 unremitted earnings and profits of non-U.S. subsidiaries which have been previously deferred from U.S. income taxes including such earnings through the measurement date as determined by the Tax Reform Act. The amount of transition tax also depends on the amount of earnings and profits held in cash or other specified assets.December 31, 2017. The Company had an estimated $310 million of undistributed non-U.S. earnings and profits subject to the transition tax and recognized a provisional $33.1 million of income tax expense in the fourth quarter of 2017. After the utilization of existing tax credits, the Company expects to pay cash taxes, including state income taxes, of an estimated $22.5 million with respect to the transition tax payable over eight years. These amounts may change upon the issuance of additional regulatory guidance or when the Company finalizeshas since finalized its calculation of earnings and profits, including the amounts held in cash or other specified assets and its calculation of available foreign tax credits consistent with the additional regulatory guidance issued during 2018 and 2019, resulting in a reduction in tax expense of $4.4 million and an increase in tax expense of $0.1 million in 2018 and 2019, respectively.

After the utilization of existing tax credits, the Company will pay cash taxes, including state income taxes, of $17.7 million with respect to the transition tax payable over an installment period of eight years beginning in 2018. During 2019, the Company provided for the anticipated withholding taxes on unremitted non-U.S. earnings for which no reinvestment plan has been identified and that may be repatriated in the foreseeable future. As such, the Company has provided a deferred tax liability with respect to these earnings of $1.7 million at December 31, 2019.
A reconciliation of the consolidated federal statutory and reported income tax is as follows for the years ended December 31:
  2019 2018 2017
Income before income taxes $47.9
 $36.6
 $93.8
Statutory taxes at 21% (35% in 2017) $10.1
 $7.7
 $32.8
Permanent adjustments:      
Federal income tax credits (2.8) (2.9) (1.6)
Non-U.S. rate differences (0.9) (2.3) (7.8)
Equity interest earnings (1.5) (1.7) (8.1)
State income taxes (0.2) 0.6
 1.1
Valuation allowance 0.5
 3.0
 3.4
Global intangible low-taxed income 1.6
 1.2
 
Base-erosion and anti-abuse tax 1.4
 
 
Other 3.1
 1.0
 (0.2)
  $1.2
 $(1.1) $(13.2)

Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)



or other specified assets and its calculation of available foreign tax credits. The Company intends that future distributions will be from earnings which would otherwise qualify for the one hundred percent dividends received deduction provided in the Tax Reform Act and earnings which would not result in any significant foreign taxes. As a result, no additional income taxes have been provided for any undistributed foreign earnings not subject to the transition tax, nor any additional outside basis differences inherent in these entities, as these amounts continue to be indefinitely reinvested in non-U.S. operations. See Note 6 to the consolidated financial statements in this Annual Report on Form 10-K for further discussion of income taxes.
A reconciliation of the consolidated federal statutory and reported income tax is as follows for the years ended December 31:
 2017 2016 2015
Income before income taxes $93.8
 $38.3
 $104.5
Statutory taxes at 35% $32.8
 $13.4
 $36.6
Permanent adjustments:      
Equity interest earnings (8.1) (2.2) (1.9)
Non-U.S. rate differences (7.8) (9.0) (13.3)
Federal income tax credits (1.6) (1.7) 
State income taxes 1.1
 0.1
 3.4
Valuation allowance 3.4
 2.4
 9.3
Other (0.2) 0.6
 1.0
 $(13.2) $(9.8) $(1.5) 2019 2018 2017
Discrete items:            
Tax Reform Act 38.2
 
 
 0.1
 (4.4) 38.2
Provision to return adjustments 0.6
 (1.9) (0.2) (1.0) (0.6) 0.6
Valuation allowance (3.3) (2.6) (3.4) 0.3
 
 (3.3)
Sale of non-U.S. investment (9.1) (1.9) (3.7) 
 
 (9.1)
Other (1.1) (1.2) 1.6
 0.6
 0.7
 (1.1)
 $25.3
 $(7.6) $(5.7) $
 $(4.3) $25.3
Income tax provision (benefit) $44.9
 $(4.0) $29.4
Income tax provision $11.3
 $2.3
 $44.9
Reported income tax rate 47.9% n.m.
 28.1% 23.6% 6.3% 47.9%
n.m. - not meaningful
The Company's effective income tax rate differs from the U.S. federal statutory tax rate of 35% primarily as a result of equity interest earnings,federal research and energy credits, income taxed in non-U.S. jurisdictions, equity interest earnings, global intangible low-taxed income, base-erosion and anti-abuse tax and changes in valuation allowances primarily in non-U.S. jurisdictions. Other permanent adjustments include non-deductible compensation and anticipated withholding tax on unremitted non-U.S. earnings.
In addition, the Company recognized the effect of the Tax Reform Act as discrete adjustments. The effect of other discrete items on the reported income tax rate was as follows:


During 2017, the Company recognized a tax benefit of $9.1 million and a tax expense of $1.4 million for unrecognized tax benefits from an internal sale of a subsidiary between consolidated companies resulting in the repatriation of non-U.S. accumulated earnings taxed at higher rates. In addition, the Company settled various federal obligations in Brazil through the utilization of its federal net operating loss carryforwards for which a valuation allowance was previously provided. As a result of the utilization of the underlying deferred tax assets, the Company released the associated valuation allowance previously provided of $4.7 million. This was partly offset by a $1.6 million valuation allowance provided against deferred tax assets in China where the Company has determined that such deferred tax assets no longer meet the more likely than not standard for realization.


During 2016,See Note 7 to the Company received a notice fromconsolidated financial statements in this Annual Report on Form 10-K for further discussion of income taxes.

LIQUIDITY AND CAPITAL RESOURCES
Cash Flows
The following tables detail the Italian Tax Authority approvingchange in cash flow for the transfer of certain tax losses as part of an internal restructuring. As a result, the Company believes it is more likely than not that deferred tax assets for such losses will be realized in the foreseeable future, and has released the valuation allowance previously provided. The Company also recognized tax benefits from provision to return adjustments primarily related to a U.S. tax deduction for manufacturingyears ended December 31:

 2019 2018 Change
Operating activities:     
Net income$36.6
 $34.3
 $2.3
Depreciation and amortization43.3
 44.0
 (0.7)
Stock-based compensation8.2
 5.7
 2.5
Dividends from unconsolidated affiliates5.1
 22.2
 (17.1)
Other10.1
 (2.4) 12.5
Working capital changes, excluding the effect of business acquisitions(26.6) (36.2) 9.6
Net cash provided by operating activities76.7
 67.6
 9.1
      

Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




 2019 2018 Change
Investing activities:     
Expenditures for property, plant and equipment(49.7) (38.8) (10.9)
Proceeds from the sale of property, plant and equipment7.7
 5.9
 1.8
Business acquisitions, net of cash acquired
 (78.0) 78.0
Net cash used for investing activities(42.0) (110.9) 68.9
      
Cash flow before financing activities$34.7
 $(43.3) $78.0

Net cash provided by operating activities and adjustments for the taxation of certain foreign earnings and a tax benefit from an internal sale of a subsidiary between affiliated companies resultingincreased $9.1 million in the repatriation of non-U.S. accumulated earnings which triggered a currency loss for U.S. tax purposes.

Other items during 2016 include a tax benefit of $4.0 million. As2019 compared with 2018, primarily as a result of the Bolzoni acquisition,change in other operating activities, as the Company changed its previous reinvestment assertion;resolved insurance matters for cash settlements in the fourth quarter of 2019, in addition to working capital changes and consequently, allhigher net income. In addition, 2018 includes dividends from HYGFS resulting from a one-time benefit associated with the Tax Reform Act.

The change in net cash used for investing activities during 2019 compared with 2018 is mainly the result of the earningsacquisition of its European operations are now considered permanently reinvested and the previously provided deferred tax liability is no longer required. In addition, the Company recognized tax expense of $1.6 million related to non-deductible acquisition expenses and tax expense of $2.1 million for net additions for unrecognized tax benefits.

During 2015, a significant downturn was experiencedMaximal in the Company's Brazilian operations. This significant decreasesecond quarter of 2018.
 2019 2018 Change
Financing Activities:     
Net reduction of long-term debt and revolving credit agreements$(29.8) $(65.7) $35.9
Cash dividends paid(21.0) (20.4) (0.6)
Financing fees paid(0.4) (0.6) 0.2
Other(0.4) (0.9) 0.5
Net cash used for financing activities$(51.6) $(87.6) $36.0

The change in operations and actions taken by management to reduce its manufacturing activity to more appropriate levels, coupled with the continued low expectations in the near termnet cash used for the Brazilian lift truck market and the continuing devaluationfinancing activities of the Brazilian real, caused the Company in 2015 to forecast a three-year cumulative loss for its Brazilian operations. Although the Company projects earnings over the longer term for its Brazilian operations, such longer-term forecasts are not sufficient positive evidence to support the future utilization of deferred tax assets when a three-year loss is determined. Accordingly, in 2015, the Company recorded a valuation allowance adjustment of $1.9 million against its deferred tax assets in Brazil. The Company also recognized $2.7 million, $2.4 million and $5.6$36.0 million in 2017, 2016 and 2015, respectively, of valuation allowances related to pre-tax losses in Brazil included in its effective tax rate.

During 2015, the Company came to a tentative agreement in negotiating an Advance Pricing Agreement2019 compared with the Australian Tax Authority. The terms of the agreement were finalized in 2016 and will extend through 2020. As a result of this agreement, in 2015, the Company released a portion of the valuation allowance of $4.4 million,2018 was primarily related to the deferred tax assetrepayment of debt at Hyster-Yale Maximal in 2018.
Financing Activities

The Company has a $240.0 million secured, floating-rate revolving credit facility (the "Facility") that it expected would be utilizedexpires in April 2022. There were $0.3 million of borrowings outstanding under the Facility at December 31, 2019. The availability under the Facility at December 31, 2019 was $234.7 million, which reflects reductions of $5.0 million for letters of credit and other restrictions. As of December 31, 2019, the Facility consisted of a U.S. revolving credit facility of $150.0 million and a non-U.S. revolving credit facility of $90.0 million. The obligations under the Facility are generally secured by a first lien on the working capital assets of the borrowers in the foreseeable future. In 2015,Facility, which include but are not limited to, cash and cash equivalents, accounts receivable and inventory (the "Facility Collateral") and a second lien on the Term Loan Collateral (defined below). The approximate book value of assets held as collateral under the Facility was $900 million as of December 31, 2019.
Borrowings bear interest at a floating rate based on a base rate or LIBOR, as defined in the Facility, plus an applicable margin. The applicable margins, as of December 31, 2019, for U.S. base rate loans and LIBOR loans were 0.50% and 1.50%, respectively. The applicable margin, as of December 31, 2019, for non-U.S. base rate loans and LIBOR loans was 1.50%. The applicable interest rates for borrowings outstanding under the Facility on December 31, 2019 was 1.50%. The Facility also required the payment of a fee of 0.250% per annum on the unused commitment as of December 31, 2019.

The Facility includes restrictive covenants, which, among other things, limit additional borrowings and investments of the Company also recognized a tax benefit from an internal sale of a subsidiary between consolidated companies resultingand its subsidiaries subject to certain thresholds, as set forth in the repatriationFacility, and limits the payment of non-U.S. accumulated earnings taxed at higher rates.dividends. If average availability for both total and U.S. revolving credit facilities, on a pro forma basis, is greater than 15% and less than or equal to 20%, the Company may pay dividends subject to achieving a minimum Fixed Charge Coverage Ratio of 1.00 to 1.00, as defined in the Facility. If the average availability is greater than 20% for both total and U.S. revolving credit facilities, on a

See Note 6 to the consolidated financial statements in this Annual Report on Form 10-K for further discussion of income taxes.

LIQUIDITY AND CAPITAL RESOURCES
Cash Flows
The following tables detail the change in cash flow for the years ended December 31:
 2017 2016 Change
Operating activities:     
Net income$48.9
 $42.3
 $6.6
Depreciation and amortization42.8
 39.1
 3.7
Stock-based compensation8.8
 4.9
 3.9
Impairment of long-lived assets4.9
 
 4.9
Dividends from unconsolidated affiliates2.8
 5.1
 (2.3)
Other0.7
 (27.7) 28.4
Working capital changes, excluding the effect of business acquisitions55.8
 (112.6) 168.4
Net cash provided by (used for) operating activities164.7
 (48.9) 213.6
      


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




 2017 2016 Change
Investing activities:     
Expenditures for property, plant and equipment(41.0) (42.7) 1.7
Proceeds from the sale of property, plant and equipment1.3
 13.7
 (12.4)
Investments in equity securities(5.6) 
 (5.6)
Business acquisitions, net of cash acquired(1.0) (116.1) 115.1
Purchase of noncontrolling interest(1.0) 
 (1.0)
Net cash used for investing activities(47.3) (145.1) 97.8
      
Cash flow before financing activities$117.4
 $(194.0) $311.4

Net cash provided by operating activities increased $213.6 million in 2017 compared with 2016 primarily as a result of the change in working capital items and other operating activities. The change in working capital was mainly due to accounts payable in the Americas returning to normalized levels during 2017 following an unplanned systems-related acceleration of supplier payments in December 2016, and lower payments of amounts accrued, primarily in the Americas, in 2017 compared with 2016. The change in net cash used for investing activities during 2017 compared with 2016 is mainly the result of the acquisition of Bolzoni in the second quarter of 2016.
 2017 2016 Change
Financing Activities:     
Net addition of long-term debt and revolving credit agreements$78.0
 $99.0
 $(21.0)
Cash dividends paid(19.8) (19.2) (0.6)
Financing fees paid(4.7) (1.7) (3.0)
Other(0.4) (0.2) (0.2)
Net cash provided by financing activities$53.1
 $77.9
 $(24.8)

Net cash provided by financing activities decreased $24.8 million in 2017 compared with 2016. The decrease in 2017 was due to borrowings under the Term Loan (as defined below), being used to repay borrowings under the Facility (as defined below) during 2017.
Financing Activities

The Company has a $200.0 million secured, floating-rate revolving credit facility (the "Facility”) that expires in April 2022. There were no borrowings outstanding under the Facility at December 31, 2017. The excess availability under the Facility at December 31, 2017 was $195.9 million, which reflects reductions of $4.1 million for letters of credit and other restrictions. The Facility consists of a U.S. revolving credit facility in the amount of $120.0 million and a non-U.S. revolving credit facility in the amount of $80.0 million. The Facility can be increased up to the total aggregate amount of $300.0 million over the term of the agreement in minimum increments of $10.0 million subject to certain conditions. The obligations under the Facility are generally secured by a lien on the working capital assets of the borrowers in the Facility, which include but are not limited to, cash and cash equivalents, accounts receivable and inventory and a second lien on the Term Loan Collateral (defined below). The approximate book value of assets held as collateral under the Facility was $1.0 billion as of December 31, 2017.
Borrowings bear interest at a floating rate based on a base rate or LIBOR, as defined in the Facility, plus an applicable margin. The applicable margins, as of December 31, 2017, for U.S. base rate loans and LIBOR loans were 0.25% and 1.25%, respectively. The applicable margin, as of December 31, 2017, for non-U.S. base rate loans and LIBOR loans was 1.25%. The applicable LIBOR interest rates under the Facility on December 31, 2017 were 2.73% and 1.25%, respectively, for the U.S. and non-U.S. facility including the applicable floating rate margin. The Facility also required the payment of a fee of 0.350% per annum on the unused commitment as of December 31, 2017.


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)


The Facility includes restrictive covenants, which, among other things, limit additional borrowings and investments of the Company and its subsidiaries subject to certain thresholds, as defined in the Facility, and limits the payment of dividends. If availability for both total and U.S. revolving credit facilities on a pro forma basis, is greater than fifteen percent and less than or equal to twenty percent, the Company may pay dividends subject to achieving a minimum fixed charge coverage ratio of 1.00 to 1.00, as defined in the Facility. If the availability is greater than twenty percent for both total and U.S. revolving credit facilities on a pro forma basis, the Company may pay dividends without any minimum fixed charge coverage ratioFixed Charge Coverage Ratio requirement. The Facility also requires the Company to achieve a minimum fixed charge coverage ratioFixed Charge Coverage Ratio in certain circumstances in which total excess availability is less than ten percent10% of the total commitments under the Facility or excess availability under the U.S. revolving credit facility is less than ten percent10% of the U.S. revolver commitments, as defined in the Facility. At December 31, 2017,2019, the Company was in compliance with the covenants in the Facility.


During 2017, theThe Company entered into an agreement foralso has a $200.0 million term loan (the “Term Loan”"Term Loan"), which matures in May 2023. The Term Loan requires quarterly principal payments on the last business day of each March, June, September and December commencing September 30, 2017 in an amount equal to $2.5 million and themillion. The final principal repayment is due on the May 30, 2023. The Company may also be required to make mandatory prepayments, in certain circumstances, as provided in the Term Loan. At December 31, 2017,2019, there was $195.0$175.0 million of principle outstanding under the Term Loan which has been reduced in the consolidated balance sheet by $4.1$2.8 million of discounts and unamortized deferred financing fees.


The obligations under the Term Loan are generally secured by a first priority lien on the present and future shares of capital stock, material real property, fixtures and general intangibles consisting of intellectual property (collectively, the "Term Loan Collateral") and a second priority lien on the remaining collateral of the U.S. borrowers in the Facility.Facility Collateral. The approximate book value of assets held as collateral under the Term Loan was $710$600 million as of December 31, 2017.2019.


Borrowings under the Term Loan bear interest at a floating rate, which can be a base rate or Eurodollar rate, as defined in the Term Loan, plus an applicable margin. The applicable margin, is based on the consolidated leverage ratio, as provided in the Term Loan, and ranges from 2.75% to 3.00%is 2.25% for U.S. base rate loans and 3.75% to 4.00%3.25% for Eurodollar loans. The weighted average interest rate on the amount outstanding under the Term Loan at December 31, 20172019 was 5.57%5.05%. In addition, the Term Loan includes restrictive covenants, which, among other things, limit additional borrowings and investments of the Company subject to certain thresholds, as provided in the Term Loan.thresholds. The Term Loan limits the payment of regularly scheduled dividends and other restricted payments to $50.0 million in any fiscal year, unless the consolidated total net leverage ratio, as defined in the Term Loan, does not exceed 1.75 to 1.00 at the time of the payment. At December 31, 2017,2019, the Company was in compliance with the covenants in the Term Loan.


The Company incurred fees and expenses of $0.4 million, $0.6 million and $4.7 million in 2019, 2018 and 2017, respectively. These fees related to the amendment ofamending the Facility and entry into and amending the Term Loan. These fees were deferred and are being amortized as interest expense over the term of the applicable debt agreements. Fees related to the Term Loan are presented as a direct deduction of the corresponding debt.


The Company had other debt outstanding, excluding capitalfinance leases, of approximately $80.0$93.5 million at December 31, 2017.2019. In addition to the excess availability under the Facility, the Company had remaining availability of $16.8$18.2 million related to other non-U.S. revolving credit agreements.


The Company believes funds available from cash on hand, the Term Loan, the Facility, other available lines of credit and operating cash flows will provide sufficient liquidity to meet its operating needs and commitments during the next twelve months and until the expiration of the Facility in April 2022.


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




Contractual Obligations, Contingent Liabilities and Commitments
Following is a table summarizing the contractual obligations as of December 31, 2017:2019:
Payments Due by PeriodPayments Due by Period
Contractual ObligationsTotal 2018 2019 2020 2021 2022 ThereafterTotal 2020 2021 2022 2023 2024 Thereafter
Term Loan$195.0
 $10.0
 $10.0
 $10.0
 $10.0
 $10.0
 $145.0
$175.0
 $10.0
 $10.0
 $10.0
 $145.0
 $
 $
Variable interest payments on Term Loan50.1
 10.6
 10.0
 9.5
 8.9
 8.4
 2.7
27.9
 9.0
 8.2
 7.7
 3.0
 
 
Revolving credit agreements6.1
 6.1
 
 
 
 
 
7.7
 7.7
 
 
 
 
 
Variable interest payments on revolving credit agreements0.1
 0.1
 
 
 
 
 
0.1
 0.1
 
 
 
 
 
Other debt73.9
 52.4
 21.3
 0.1
 0.1
 
 
86.1
 57.0
 23.7
 5.4
 
 
 
Variable interest payments on other debt2.7
 1.8
 0.6
 0.2
 0.1
 
 
2.1
 1.6
 0.5
 
 
 
 
Capital lease obligations including principal and interest20.3
 7.1
 5.9
 4.9
 2.4
 
 
Finance lease obligations including principal and interest21.8
 9.0
 6.2
 3.2
 2.3
 1.0
 0.1
Operating leases74.9
 20.2
 13.9
 10.3
 7.4
 6.1
 17.0
96.9
 21.2
 16.8
 13.7
 10.4
 7.6
 27.2
Tax Reform Act transition tax liability22.5
 2.1
 1.8
 1.8
 1.8
 1.8
 13.2
13.1
 
 1.2
 1.4
 2.6
 3.5
 4.4
Purchase and other obligations564.3
 557.8
 1.0
 1.0
 2.0
 
 2.5
624.8
 614.4
 3.5
 3.2
 3.7
 
 
Total contractual cash obligations$1,009.9
 $668.2
 $64.5
 $37.8
 $32.7
 $26.3
 $180.4
$1,055.5
 $730.0
 $70.1
 $44.6
 $167.0
 $12.1
 $31.7
The Tax Reform Act provides for a one-time transition tax on the deemed repatriation of all of the post-1986 undistributed non-U.S. earnings and profits including such earnings through the measurement date as determined by the Act. The Company had an estimated $310 million of undistributed non-U.S. earnings and profits subject to the transition tax and recognized a provisional $33.1 million of income tax expense in the fourth quarter of 2017.
After the utilization of existing tax credits, the Company expects towill pay total cash taxes, including state income taxes, of $22.5$17.7 million with respect to the transition toll tax payable over an installment period of eight years.years, beginning in 2018. During 2019, the Company has provided for the anticipated withholding taxes on unremitted non-U.S. earnings for which no reinvestment plan has been identified and that may be repatriated in the foreseeable future. As such, the Company has provided a deferred tax liability with respect to these earnings of $1.7 million at December 31, 2019.
The Company has a long-term liability of approximately $7.8$19.6 million for unrecognized tax benefits, including interest and penalties, as of December 31, 2017.2019. At this time, the Company is unable to make a reasonable estimate of the timing of payments due to, among other factors, the uncertainty of the timing and outcome of the Company's audits.
An event of default, as defined in the agreements governing the Facility, the Term Loan, other debt agreements, and in operating and capital lease agreements, could cause an acceleration of the payment schedule. No such event of default has occurred or is anticipated under these agreements.
The Company's interest payments are calculated based upon the anticipated payment schedule and the December 31, 20172019 applicable rates and applicable margins as described in the Facility and other debt agreements. A 1/8% increase in the LIBOR rate would increase the Company's estimated total interest payments on debt by $0.2 million.
The purchase and other obligations are primarily for accounts payable, open purchase orders and accrued payroll and incentive compensation.


Pension funding can vary significantly each year due to plan amendments, changes in the market value of plan assets, legislation and the Company's funding decisions to contribute any excess above the minimum legislative funding requirements. As a result, pension funding has not been included in the table above. Pension benefit payments are made from assets of the pension plans. The Company expects to contribute approximately $0.5$0.4 million and $3.2 million to its U.S. and non-U.S. pension plans, respectively, in 2018. No contributions to the Company's U.S. pension plans are expected in 2018.2020.


In addition, the Company has recourse and repurchase obligations with a maximum undiscounted potential liability of $203.5$179.7 million at December 31, 2017.2019. Recourse and repurchase obligations primarily represent contingent liabilities assumed by the Company to support financing agreements made between the Company's customers and third-party finance companies for the customer’s purchase of lift trucks from the Company. For these transactions, the Company or a third-party finance company retains a perfected security interest in the lift truck, such that the Company would take possession of the lift truck in the event it would become liable under the terms of the recourse and repurchase obligations. Generally, these commitments are due


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




it would become liable under the terms of the recourse and repurchase obligations. Generally, these commitments are due upon demand in the event of default by the customer. The security interest is normally expected to equal or exceed the amount of the commitment. To the extent the Company would be required to provide funding as a result of these commitments, the Company believes the value of its perfected security interest and amounts available under existing credit facilities are adequate to meet these commitments in the foreseeable future.
The amount of the recourse or repurchase obligations changes over time as obligations under existing arrangements expire and new obligations arise in the ordinary course of business. Losses anticipated under the terms of the recourse or repurchase obligations were not significant at December 31, 20172019 and reserves have been provided for such losses in the consolidated financial statements included elsewhere in this Annual Report on Form 10-K. See also “Related Party Transactions” below.
Capital Expenditures
The following table summarizes actual and planned capital expenditures:
 Planned 2018 Actual 2017 Actual 2016 Planned 2020 Actual 2019 Actual 2018
Lift truck business $42.4
 $35.3
 $36.5
 $63.6
 $37.8
 $31.8
Bolzoni 6.6
 4.7
 4.0
 11.4
 5.6
 4.2
Nuvera 6.0
 1.0
 2.2
 11.1
 6.3
 2.8
 $55.0
 $41.0
 $42.7
 $86.1
 $49.7
 $38.8
Planned expenditures in 20182020 are primarily for product development improvements at manufacturing locations,and tooling, improvements to information technology infrastructure, improvements at manufacturing locations and manufacturing equipment. The principal sources of financing for these capital expenditures are expected to be internally generated funds and bank financing.
Capital Structure
December 31  December 31  
2017 2016 Change2019 2018 Change
Cash and cash equivalents$220.1
 $43.2
 $176.9
$64.6
 $83.7
 $(19.1)
Other net tangible assets527.8
 531.5
 (3.7)632.6
 601.3
 31.3
Intangible assets56.1
 56.2
 (0.1)60.1
 67.7
 (7.6)
Goodwill59.1
 50.7
 8.4
106.7
 108.3
 (1.6)
Net assets863.1
 681.6
 181.5
864.0
 861.0
 3.0
Total debt(290.7) (211.2) (79.5)(287.0) (301.5) 14.5
Total equity$572.4
 $470.4
 $102.0
$577.0
 $559.5
 $17.5
Debt to total capitalization34% 31% 3%33% 35% (2)%
RELATED PARTY TRANSACTIONS

See Note 19 to the consolidated financial statements in this Annual Report on Form 10-K for further discussion of related party transactions.

INVESTOR PERSPECTIVE

The Company hasis currently undertaking the largest set of programs in its history. These programs are expected to have a 20% ownership interest in HYGFS, a joint venture with Wells Fargo Financial Leasing, Inc. (“WF”), formed primarily fortransformational impact on the purpose of providing financial servicesCompany’s competitiveness, market position and economic performance over the next three to independent Hyster® and Yale® lift truck dealers and National Account customers in the United States. The Company’s ownership in HYGFS is accounted for using the equity method of accounting.four years.
Generally, the Company sells lift trucks through its independent dealer network or directly to customers. These dealers and customers may enter into a financing transaction with HYGFS or other unrelated third parties. HYGFS provides debt financing to dealers and lease financing to both dealers and customers. HYGFS’ total purchases of Hyster® and Yale® lift trucks from dealers, and directly from the Company, such that HYGFS could provide retail lease financing to customers, for the years ended December 31, 2017, 2016 and 2015 were $475.9 million, $438.8 million and $483.2 million, respectively. Of these amounts, $71.1 million, $69.4 million and $78.6 million for the years ended December 31, 2017, 2016 and 2015, respectively, were invoiced directly from the Company to HYGFS so that the customer could obtain operating lease financing


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




from HYGFS. Amounts receivable from HYGFS were $10.4 millionFor some time, the Company has been focused on six core strategies:
1.Provide the lowest cost of ownership while enhancing productivity for customers.
2.Be the leader in the delivery of industry- and $12.1 million at December 31, 2017customer-focused solutions.
3.Be the leader in independent distribution.
4.Grow in emerging markets.
5.Be the leader in the attachments business.
6.Be a leader in fuel cells and 2016, respectively.their applications.
Under
The projects required to execute fully on these strategies have been, in general, initiated over the termslast several years and many are now moving toward completion. Further, many of the joint venture agreement with WF, the Company provides recourse for wholesale financing provided by HYGFSprojects supporting these strategies are inter-related and succeeding in one will foster success in others. In total, these projects have required, and continue to require, significant up-front expense and capital expenditure investment. The various projects cover a broad range of the Company's dealers. Additionally, the credit quality of a customer or concentration issues within WF may require providing recourse or repurchase obligationsactivities, including product development, supply chain, IT, manufacturing, sales and marketing for lift trucks purchased by customers and financed through HYGFS. At December 31, 2017, approximately $174.2 millioneach of the Company’s total recourse or repurchase obligations of $203.5 million relatedthree major businesses: Lift Truck, Bolzoni and Nuvera.

Since 2017, these investments, both expense and capital, have increased significantly. Further increased investments are expected to transactionscontinue to be made, with HYGFS.capital expenditures expected to be substantially higher in 2020 than in 2019. The Company has reserved for losses underreturn from these investments is expected to increase over the termsnext three to four years. In this context, Lift Truck's operating profit is expected to improve significantly in 2020 over 2019. Results in the first half of the recourse or repurchase obligations in its consolidated financial statements. Historically,year are expected to be higher than the Company has not had significant lossesfirst half of 2019, with respect to these obligations. During 2017, 2016 and 2015, the net losses resulting from customer defaults did not have a material impact on the Company’s results of operations or financial position.
In connection with the joint venture agreement, the Company also provides a guarantee to WF for 20% of HYGFS’ debt with WF, such that the Company would become liable under the terms of HYGFS’ debt agreements with WFfurther, substantial improvement expected in the casesecond half of default by HYGFS. At December 31, 2017, loans from WFthe year compared with both the second half of 2019 and the first half of 2020. Further improved results are expected with significant increases through 2023. Lift Truck's objective is to HYGFS totaled $1.0 billion. Although the Company's contractual guarantee was $205.9 million, the loans by WFachieve its target of 7% operating profit margin in this period assuming reasonable market conditions continue. Likewise, Bolzoni’s operating profit is expected to HYGFS are secured by HYGFS’ customer receivables, of which the Company guarantees $174.2 million. Excluding the $174.2 million of HYGFS receivables guaranteed by the Company from HYGFS’ loans to WF, the Company’s incremental obligationincrease in 2020, primarily as a result of this guaranteethe absence of $2.5 million of restructuring charges for its Americas operations, with further improvements in the following years, leading to WFachievement of a 7% operating profit margin target. Nuvera’s results are expected to improve in 2020 over 2019, with shipments expected to ramp up throughout the second half of 2020. Results are expected to improve significantly at Nuvera over the 2021 to 2023 time period. At each of these three businesses, the investments being undertaken are expected to lead to increased operating profit through higher volumes, decreased product costs and improved pricing, partially offset by a higher level of operating expense in future years. Overall, consolidated operating profit and net income in 2020 are expected to increase substantially over 2019.

At Lift Truck, product programs are expected to lay the groundwork for enhanced market position by providing lower cost of ownership and enhanced productivity for the Company’s customers. At the core of these programs is $179.6 million,a new set of modular and scalable product families covering both internal combustion engine and electric trucks, which will provide customers with enhanced flexibility for meeting their application needs combined with the benefit of lowest total cost of ownership. The introduction of the first of these products is securedexpected in the second half of 2020 with the launch of a new range of counterbalanced trucks. This range will be expanded comprehensively to include larger counterbalanced capacities, Big Trucks and warehouse trucks. A further major initiative in product offerings will come from the introduction of trucks manufactured by 20%Hyster-Yale Maximal in China. A line of HYGFS' customer receivablestrucks from Hyster-Yale Maximal has been designed to provide high quality and other secured assets of $272.3 million. HYGFS has not defaultedreliable, lower-intensity trucks for global markets and standard trucks for the Chinese market. These trucks are being progressively launched globally under the terms of this debt financingHyster® UT and Yale® UX brands to serve lower-intensity customer applications. The launch began in the pastJAPIC, Brazil and although there can be no assurances,Latin America markets during the Company2019 fourth quarter and is not awareexpected to expand over the course of any circumstances that would cause HYGFS2020 to default in future periods.

The following table includes the exposure amounts related to the Company's guarantees at December 31, 2017:
  HYGFS Total
Total recourse or repurchase obligations $174.2
 $203.5
Less: exposure limited for certain dealers 54.3
 54.3
Plus: 7.5% of original loan balance 12.0
 12.0
  131.9
 161.2
Incremental obligation related to guarantee to WF 179.6
 179.6
Total exposure related to guarantees $311.5
 $340.8
all countries. In addition, Lift Truck’s partner in India is expected to providing financing toincrease local production of larger trucks. In 2019, a new end rider and a new automated Reach Truck were launched in the Company’s dealers, HYGFS provides operating lease financing to the Company. Operating lease obligations primarily relate to specific sale-leaseback-sublease transactions for certain customers whereby the Company sellsNorth America market, and a range of new lower-cost Class 3 lift trucks, including walkie and stacker global products, were launched in certain markets. All of these new products are expected to HYGFS, leases thesehave a significant impact on results in 2020. In early 2020, Lift Truck launched a new 3- to 5-ton integrated lithium-ion engine lift trucks back under an operating lease agreementtruck with numerous ergonomic benefits for the Americas and then subleases those lift trucksEMEA markets, and it expects to customers under an operating lease agreement. Total obligationslaunch a 7- to HYGFS under9-ton version later in the operating lease agreements were $15.8 million and $17.2 million at December 31, 2017 and 2016, respectively.year. In addition, the Company provides certain subsidiesexpects to its dealers thatlaunch a newer-model Reach Truck for the Americas market late in the first quarter of 2020. To further enhance productivity for customers, Lift Truck is continuing to develop automation solutions for warehouse trucks, initially in combination with industry partners. Some of these products are paid directlyalready in the market today, but new solutions and customers are expected to HYGFS. Total subsidies were $3.3 million, $2.8 million and $2.8 million for 2017, 2016 and 2015, respectively.
The Company provides certain services to HYGFS for which it receives compensation under the terms of the joint venture agreement. These services consist primarily of administrative functions and remarketing services. Total income recorded by the Company related to these services was $9.5 million in 2017, $9.8 million in 2016 and $14.6 million in 2015. In addition, in December 2015, the Company received $5.0 million as an amendment fee that was deferred and is being recognizedbe developed progressively over the remaining termnext several years. Lift Truck continues to expand sales of the agreement, which expires in December 2018.
The Company has a 50% ownership interest in Sumitomo NACCO Forklift Co., Ltd. (“SN”), a limited liability company that was formed in 1970 primarily to manufacturetelemetry products, and distribute Sumitomo-brandednew generations of lift trucks in Japan and export Hyster®- and Yale®-branded lift trucks and related components and service parts outside of Japan. Sumitomo Heavy Industries, Ltd. owns the remaining 50% interest in SN. Each stockholder of SN is entitled to appoint directors representing 50% of the vote of SN’s board of directors. All matters related to policies and programs of operation, manufacturing and sales activities require mutual agreement between the Company and Sumitomo Heavy Industries, Ltd. prior towill offer a vote of SN’s board of directors. As a result, the Company accounts for its ownership in SN using the equity method of accounting. The Company purchases products from SN for sale outside of Japan under agreed-upon terms. In 2017, 2016 and 2015, purchases from SN were $46.8 million, $55.0fully integrated telematics solution. Finally, Lift Truck anticipates introducing new fuel


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




millioncell BBRs for Class 1, 2 and $57.1 million, respectively. Amounts payable3 forklift trucks over the next few years, beginning with the first model in the second quarter of 2020, that are expected over time to SNmove the fuel cell BBR business to break-even.

The introduction of these new products will lead to significant changes in supply chain sourcing and in the Company’s various manufacturing facilities around the world. Consolidated component volume sourced globally from reliable partners is expected to reduce costs and improve quality as these new products are brought to market over the next few years. Lift Truck’s largest manufacturing facilities in Berea, Craigavon and Greenville are undergoing significant changes and are expected to have reduced costs and improved productivity while most other plants will see more modest changes. China production activities are expected to be consolidated at December 31, 2017the Hyster-Yale Maximal facility. The first phase of this transition occurred during the 2019 fourth quarter, and 2016 were $18.1 millionthe second phase is expected to be completed by the end of 2020.

Lift Truck currently has over 400 different forklift models in its range, including Hyster-Yale Maximal models, which are reinforced by its capability to customize these trucks to meet specific customer needs. The modular nature of the new products being introduced will enhance the Company's ability to meet customer needs at lowest cost and $16.5 million, respectively.

Additionally,in more detail, both at the industry level and at the individual customer level. To achieve the full expected benefit from these programs, the Company recognized incomecontinues to make substantial expense investments in its sales and marketing organizations to realign teams around industry groupings, with spending on this program almost at mature levels. Within marketing, industry-focused resources have been added to develop industry strategies. The higher-priority industry strategies have been completed for North America and Europe. Most of $0.4 million, $0.5 millionthe strategies were completed for all countries, or groups of countries, during 2019 but will mature and $0.3 million during 2017, 2016be enhanced over future years. To support execution of these industry strategies, Lift Truck has invested in additional industry-focused sales capabilities to support its dealers. This industry-focused structure has been highly successful in its National Account direct sales program and 2015, respectively, for payments from SN for use of technology developed byis now being deployed with the Company.

OUTLOOK

Americas Outlook

In 2018, the Company expects the Americas market to continue to grow but at a more moderate rate than the double digit growth experiencednew dealer support teams. These investments are largely in 2017, primarily as a result of moderate growthplace in North America, and significantly higherto a lesser degree in EMEA. Additional sales capabilities are expected to be added in other areas around the world over the next year, while the Company will look to reduce costs in other areas to contain spending. In total, the Company believes that these projects will put it in a position to be a leader in the delivery of industry- and customer-focused solutions worldwide.

While the new sales teams will support dealers’ sales efforts, the Company also intends to continue to upgrade its global dealer capabilities. A core objective is to have dealers that are fully capable of maximizing the potential of the Hyster® and Yale® brands in their territories. These dealers will be supported by Lift Truck's commitment to helping dealers strengthen the excellence of their activities in all areas of their business, including leadership, sales, parts, service, rental, leasing and remarketing. To help these programs have maximum impact, the Company intends to invest over the next few years in enhanced digital customer experience systems. Taken together, these initiatives amount to a new, uniquely competitive way of serving the markets around the world.

Bolzoni is also pursuing very aggressive projects to expand its global market position. These projects include strengthening Bolzoni’s ability to serve the North America market by having responsibility for the Sulligent plant, where it is now manufacturing attachments and continuing the plant’s support of Lift Truck through the supply of cylinders and various other components. In 2019, Bolzoni phased out production at its Homewood, Illinois facility and completed the shift of manufacturing to Sulligent. Bolzoni is still maintaining a distribution center and certain other operations in Homewood. This restructuring was completed in 2019, and Bolzoni does not anticipate any further restructuring-related costs in 2020.

There is a large opportunity for market share growth in the smallerAmericas market for attachments. To help capture this, Bolzoni plans to introduce a broader range of locally produced attachments with shorter lead times to serve its customer base. Bolzoni also is in the process of increasing its sales, marketing and product support capabilities in North America, and is establishing a small assembly function in Brazil market asto serve the economic climateLatin America market. In addition, it has developed a standard product line sourced from one of its factories in that country is expectedChina to supplement its premium line. Further, Bolzoni has plans to continue to improve. Inexpand this market environment,standard product line. Bolzoni’s current outstanding premium line of products coupled with these standard products and as share gain initiatives mature, 2018 unit shipments, revenuesan industry-focused strategy are expected to give Bolzoni the ability to increase its sales significantly in the Americas, JAPIC and parts salesEMEA regions. These new programs are expected to increase Bolzoni’s market position and profitability, especially over 2017. Full-year 2018 operating profitthe next two to three years.

Nuvera is also expectedapproaching the point where it will move from being a venture business focused on commercializing leading technology to increase moderately as a result of benefits anticipated from an increase in sales of higher-priced, higher-margin Class 1, Class 2 and Class 5 units, partially offset by higher spending levels as further investment is made to fund growth initiatives. The Company expects to continue to implement pricing actions to help recover anticipated material cost inflation. Operating profit inproduct-based company serving not only the first half of 2018 is expected to be modestly lower than the first half of 2017, but is expected to be more than offset by improvements in the second half of the year.

EMEA Outlook

While 2017 growth in EMEA was very strong, the EMEA markets are expected to grow moderately in 2018. As a result of these market conditions, anticipated market share gains and the favorable effect of anticipated price increases and current currency rates, unit shipments, revenues and operating profit are expected to continue to increase in 2018. EMEA expects an increase in shipments of Class 2 and Class 3 warehouse trucks and lower-capacity Class 5 internal combustion engine trucks. Higher operating expenses are expected to partially offset the benefits from the anticipated revenue increase. Results in the first half of 2018 are anticipated to be down from the first half of 2017 due to the timing of pricing and material cost increases, with improvements in operating profit returning in the second half of the year as price increases go into effect.

JAPIC Outlook

In 2018, the JAPIC market is expected to decline moderately, driven by China. However, as a result of the continued implementation of the Company's strategic initiatives, revenues and operating results are expected to improve, with higher employee-related expenses expected to partly offset the improvement in operating results. Operating results in the first half of 2018 are expected to be lower than the first half of 2017, but are expected to be more than offset by improvements in the second half of the year.

Overall Lift Truck Outlook

The Company ended 2017 with strong fourth quarter and full-year operating results, as well as strong bookings and backlog, both of which exceeded the Company's expectations. However, the increase in bookings did not correspond to the unexpectedly large increase in the liftforklift truck market, but also heavy-duty applications, such as the Company maintained its focus on a carefully paced ramp up in production and achievement of price goals through sales of a richer product mix, while maintaining a healthy backlog to achieve production efficiencies.

The Company has realigned its sales and marketing teams and is increasing resources to execute more effectively the Company's specific industry strategies. The Company remains focused on increasing unit volumes and market share in its Lift Truck business in 2018 and beyond through the continued implementation of its key strategic initiatives, which include delivering industry- and customer-focused solutions, providing low cost of ownership and enhanced productivity for customers, enhancing independent distribution, growing in emerging markets, maintaining leadership in the attachments business and providing leadership in fuel cells and their applications.



Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)




To meet customer needs,buses and trucks and applications in the Companyautomotive sector, with an expanding line of developed products. Nuvera expects its core technology to move to a new generation of fuel cell stack design over the next year with broad application in each of these markets. It successfully certified its first 45kW engine for China in 2019 and the vehicle certification is developing new products in many segments thatprocess. Nuvera is focused on continuously improving the quality and cost of its fuel cell engines. These performance and cost factors are expected to support its increased market share objectives. In April 2017,reach target objectives over the Company launched its new ReachStacker Big Truck model dedicated solely to container-handling applications in defined markets. This product has been well-received and is gaining traction. In October 2017, production began on a new 11-ton empty container handler Big Truck with a taller mast for higher stacking and double container handling. The Company is also working with a customer to test a 52-ton Big Truck powered by a lithium-ion battery. The Company launched new versionsnext two years. With the transfer of the responsibility for development of non-fuel-cell engine components and the overall assembly of Class 3 electric-stacker, warehouse truck1 and Class 2 BBRs to Lift Truck during 2019, Nuvera is now focused entirely on fuel cell stacks and engines. To improve its cost base, Nuvera continues to work on standardizing its products, developing low-cost suppliers and automating various elements of stack production. Robotic stack assembly lines have been in development for some time, and Nuvera brought the first online during the fourth quarter of 2019. In overview, Nuvera’s objective is to reduce its loss in 2020 and to achieve break-even in the 2017 third quarter in EMEA, and, innear to medium term. In the first half of 2018, expects to introduce new Class 3 warehouse products in the Americas and new Class 1 electric counterbalanced trucks in EMEA. In addition to the lithium-ion-powered Big Truck, the Companylong term, Nuvera is testing an 8-9 ton high-performance, lithium-ion counterbalanced truck in EMEA and has other plans to expand its Big Truck product line. These new products, as well as those recently launched and the introduction of other new products in the pipeline, including trucks with new Nuvera fuel cell battery box replacements ("BBRs"), are expected to contribute substantially to market share gains, improve revenues and enhance operating margins.    the Company's overall earnings.


After a much stronger than expected marketIn summary, the Company believes it is at an inflection point in 2017, which set new industry recordsits business. Results in many regions, the overall global lift truck market in 2018 is expected to be comparable to 2017, with an anticipated modest decrease in the China market offset by moderate growth in the Americas, EMEA and Asia-Pacific markets. The Company anticipates that benefits from expected unit and parts revenue increases driven by2019 reflected continued investmentsinvestment in the Company's strategic initiatives will be partiallyprograms and progress on their implementation. In 2020, the Company expects the maturation of these investments to begin, and as a result, 2020 operating profit and net income are expected to increase significantly over 2019. Efforts to abate the most severe shortages from key suppliers in the United States have now been successful, and the supplier shortages that occurred during 2019 were generally resolved by the end of the year, with some modest lingering effects in the first quarter of 2020. The status of tariffs has been changing continuously and, although the Company is still experiencing significant additional costs from both the Section 232 and Section 301 tariffs, the Section 301 tariffs have been abated somewhat by government-granted exclusions and partly offset by higher operating expensesthe Company’s supply chain group securing alternative non-Chinese suppliers and moderating material cost inflation, resulting in an increase in operating profit in 2018 compared with 2017. However, net income in 2018negotiating price reductions.

For the 2020 full year, consolidated cash flow before financing activities is expected to increase substantiallysignificantly over 20172019.

In 2020 and 2021, a considerable portion of the new projects outlined above are expected to have reached completion for all three companies and the Company believes the full impact of these programs can lead to profitability improvements for a number of years to come. The remainder of the programs are expected to reach maturity mainly in 2022 and 2023, although a few, particularly those involving dealer structure and excellence, are more in the nature of continuous improvement projects rather than projects which reach maturity at a given time. Of course, the absolute level of profitability will reflect actual market demand levels, which showed some softening in 2019, particularly in EMEA. While markets are still at robust levels, the market appears to be in a downturn, which is currently projected to be moderate and of limited duration. As a result, in 2020, the Company is currently forecasting strong but lower forklift market levels in all geographic segments. The Company continues to forecast a resolution to the Brexit transition in a way that does not significantly harm its business prospects.

The effects of the Coronavirus epidemic continue to evolve daily, and there is much uncertainty with regard to the ramifications of this situation. Currently, as a result of the absenceextended Chinese New Year and government mandates associated with containing the Coronavirus epidemic in China, the startup of production at the Company's Chinese facilities has been delayed, but is expected to ramp up over the next few weeks. However, this timing is contingent on the appropriate utilities, transportation and other support services being in place, as well as the availability of components from suppliers. Further, the impact and the spread of the tax adjustments madevirus, which is not predictable at this time, may affect the Company's operations in 2017 for the tax reform legislation. As a resultother areas of the U.S. tax reform legislation, the Company expects its global Lift Truck effective income tax rate to be in the range of 21% to 24% in 2018 based on its expected mix of earnings.

The Company anticipates that commodity costs will continue to increase in the beginning of 2018, but will moderate as the year progresses, although these markets, particularly steel, remain volatile and sensitive to changes in the global economy.world, including Italy. The Company will continue to monitor these closelythe global Coronavirus situation, and adjust pricing accordingly.its effect on the Company's businesses, and it will take further action as necessary to maintain the health and safety of its global employees and partners, and to address any production and supply chain issues which may emerge.

Bolzoni Outlook


The majority of Bolzoni's revenuesCompany believes that investors who are generatedfocused on mid-term business improvement in market position and profitability will find that the EMEA market, primarily Western and Eastern Europe, and,Company’s focus is consistent with those investment objectives.

RECENTLY ISSUED ACCOUNTING STANDARDS

For information regarding recently issued accounting standards refer to a lesser degree, in North America. As a result of anticipated growth in both the Americas and EMEA and the continued implementation of sales enhancement programs, Bolzoni expects revenues in 2018 to increase compared with 2017.

In additionNote 2 to the anticipated increaseConsolidated Financial Statements in revenues and the expected operating leverage resulting from the sales growth, the continued implementation of several key strategic programs is expected to generate substantial growth in Bolzoni's 2018 operating profit and net income compared with 2017.this Form 10-K.


Nuvera Outlook

The organizational realignment designed to enhance the overall strategic positioning and operational effectiveness of the fuel cell business, with Nuvera focused on fuel cell stacks, engines and associated components and the Lift Truck business focused on battery box replacements and integrated engine solutions, was complete as of December 31, 2017, with the exception of the transition of manufacturing of current BBRs from Nuvera to the Lift Truck business.

Due to the relatively high cost position and limited product range of currently available BBRs, the Company is taking a measured approach to developing its customer base by building relationships with customers that are willing to pay a premium for the high power density of the current Nuvera BBR solution and the product support now offered through the Lift Truck business. In addition, the federal fuel cell tax credit was recently extended for a five-year term retroactive to January 1, 2017, which makes the economics of fuel cell-driven forklifts more competitive.

During the 2017 fourth quarter, a number of additional units were built for further testing and development by the Lift Truck business, and demand for BBRs continued to increase. The backlog for Nuvera units was just over 300 as of December 31, 2017. Nuvera expects demand to continue to increase in the first quarter of 2018 and gradually grow throughout the year. As the supply chain matures and volumes increase, costs for BBR components are expected to decrease. By early 2019, production is expected to begin at the Lift Truck business' manufacturing plant in Greenville, North Carolina, with a steady


Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)



ramp up in demand anticipated. In addition, in that same time frame, BBR manufacturing at Nuvera's Billerica facility is expected to be phased out and transferred to the Lift Truck business.     

With the phase out of BBR production in Billerica, Nuvera will focus on the design, manufacture and sales and marketing of fuel cell stacks and engines. In addition to growing demand for BBR engines, Nuvera is seeing significant interest for its stacks and fuel cell engines for applications outside of the BBR market and believes this could be a significant and profitable growth opportunity.

The Company's current target is to achieve break-even within the next two years, although this target could be achieved earlier or later depending on sales volumes for fuel cell powered lift trucks, as well as sales in other markets. Operating losses in 2018 are expected to modestly decrease compared with 2017, moderating more substantially over 2019. The net loss in 2018 is expected to be comparable to 2017 because a smaller tax benefit is expected to be realized on Nuvera's losses due to a lower effective income tax rate under the new U.S. tax reform legislation.

RECENTLY ISSUED ACCOUNTING STANDARDS

For information regarding recently issued accounting standards refer to Note 2 to the Consolidated Financial Statements in this Form 10-K.


EFFECTS OF FOREIGN CURRENCY

The Company operates internationally and enters into transactions denominated in foreign currencies. As a result, the Company is subject to the variability that arises from exchange rate movements. The effects of foreign currency fluctuations on revenues, operating profit and net income are addressed in the previous discussions of operating results. The Company's use of foreign currency derivative contracts is discussed in Item 7A, "Quantitative and Qualitative Disclosures About Market Risk,” of this Form 10-K.

FORWARD-LOOKING STATEMENTS

The statements contained in "Management's Discussion and Analysis of Financial Condition and Results of Operations" and elsewhere throughout this Annual Report on Form 10-K that are not historical facts are “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. These forward-looking statements are made subject to certain risks and uncertainties, which could cause actual results to differ materially from those presented. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date hereof. The Company undertakes no obligation to publicly revise these forward-looking statements to reflect events or circumstances that arise after the date hereof. Among the factors that could cause plans, actions and results to differ materially from current expectations are, without limitation: (1) reduction in demand for lift trucks, attachments and related aftermarket parts and service on a global basis, (2) delays in delivery or increases in costs, including transportation costs, the imposition of tariffs, or the renewal of tariff exclusions, of raw materials or sourced products and labor or changes in or unavailability of quality suppliers, (3) delays in manufacturing and delivery schedules, (4) the successful commercialization of Nuvera's technology, (5) customer acceptance of pricing, (6) the political and economic uncertainties in the countries where the Company does business, (7) the ability of dealers, suppliers and end-users to obtain financing at reasonable rates, or at all, as a result of current economic and market conditions, (3) the political and economic uncertainties in the countries where the Company does business, (4) customer acceptance of pricing, (5) delays in delivery or increases in costs, including transportation costs, of raw materials or sourced products and labor or changes in or unavailability of quality suppliers, (6)(8) exchange rate fluctuations and monetary policies and other changes in the regulatory climate in the countries in which the Company operates and/or sells products, (7) delays in manufacturing and delivery schedules, (8)(9) bankruptcy of or loss of major dealers, retail customers or suppliers, (9)(10) customer acceptance of, changes in the costs of, or delays in the development of new products, (10)(11) introduction of new products by, or more favorable product pricing offered by, competitors, (11)(12) product liability or other litigation, warranty claims or returns of products, (12)(13) the effectiveness of the cost reduction programs implemented globally, including the successful implementation of procurement and sourcing initiatives, (13)(14) changes mandated by federal, state and other regulation, including tax, health, safety or environmental legislation, (14) the successful commercialization of Nuvera's technology, (15) unfavorable effects of geopolitical and legislative developments on global operations, including without limitation, the United Kingdom's exit from the European Union, the entry into new trade agreements and the imposition of tariffs and/or economic sanctions, and (16) the ability to obtain governmental approvalsunfavorable effects of the pending Maximal transactionCoronavirus on either the proposed termsCompany's or its suppliers plants' capabilities to produce and schedule, (17)ship products if the possibility that certain conditions to the completion of the Maximal transaction will not be met, (18) the possibility that competing offers may be made for Maximal, (19) conditions affecting the industries in which the Companyepidemic spreads or Maximal operate may change, (20) the Companyquarantines are extended.

Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)


may not be able to successfully integrate Maximal’s operations and employees, and (21) the possibility that the final impact of the U.S. Tax Cuts and Jobs Act on the 2018 financial results could be more unfavorable than current estimates.


Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
INTEREST RATE RISK
The Company has entered into certain financing arrangements that require interest payments based on floating interest rates. As such, the Company's financial results are subject to changes in the market rate of interest. The Company has entered into interest rate swap agreements to reduce the exposure to changes in the market rate of interest. The Company does not enter into interest rate swap agreements for trading purposes. Terms of the interest rate swap agreements require the Company to receive a variable interest rate and pay a fixed interest rate. See also Note 89 to the Consolidated Financial Statements in this Annual Report on Form 10-K.
For purposes of risk analysis, the Company uses sensitivity analysis to measure the potential loss in fair value of financial instruments sensitive to changes in interest rates. The Company assumes that a loss in fair value is either a decrease to its assets or an increase to its liabilities. The fair value of the Company's interest rate swap agreements was a net assetliability of $0.8$2.1 million at December 31, 2017.
2019. A hypothetical 10% decrease in interest rates would cause a decrease in the fair value of interest rate swap agreements and the resulting fair value would be a liability of $0.4$2.6 million.
FOREIGN CURRENCY EXCHANGE RATE RISK
The Company operates internationally and enters into transactions denominated in foreign currencies. As such, the Company's financial results are subject to the variability that arises from exchange rate movements. The Company uses forward foreign currency exchange contracts to partially reduce risks related to transactions denominated in foreign currencies and not for trading purposes. These contracts generally mature within 36 months and require the companies to buy or sell euros, U.S. dollars, Japanese yen, British pounds, Swedish kroner, Mexican pesos and Australian dollars for its functional currency at rates agreed to at the inception of the contracts. The fair value of these contracts was a net liability of $2.1 million at December 31, 2017. See also Note 8 to the Consolidated Financial Statements in this Annual Report on Form 10-K.
For purposes of risk analysis, the Company uses sensitivity analysis to measure the potential loss in fair value of financial instruments sensitive to changes in foreign currency exchange rates. The Company assumes that a loss in fair value is either a decrease to its assets or an increase to its liabilities. Assuming a hypothetical 10% weakening of the U.S. dollar compared with other foreign currencies at December 31, 2017, the fair value of foreign currency-sensitive financial instruments, which primarily represent forward foreign currency exchange contracts, would be decreased by $19.3 million compared with the fair value at December 31, 2017. It is important to note that the change in fair value indicated in this sensitivity analysis would be somewhat offset by changes in the revaluation of the underlying receivables and payables.

Item 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share, Percentage Data and as Otherwise Noted)


trading purposes. These contracts generally mature within 36 months and require the companies to buy or sell euros, U.S. dollars, Japanese yen, British pounds, Mexican pesos, Australian dollars, Swedish kroner, Brazilian real and Chinese renminbi for its functional currency at rates agreed to at the inception of the contracts. The fair value of these contracts was a net liability of $19.8 million at December 31, 2019. See also Note 9 to the Consolidated Financial Statements in this Annual Report on Form 10-K.
For purposes of risk analysis, the Company uses sensitivity analysis to measure the potential loss in fair value of financial instruments sensitive to changes in foreign currency exchange rates. The Company assumes that a loss in fair value is either a decrease to its assets or an increase to its liabilities. Assuming a hypothetical 10% weakening of the U.S. dollar compared with other foreign currencies at December 31, 2019, the fair value of foreign currency-sensitive financial instruments, which primarily represent forward foreign currency exchange contracts, would be decreased by $6.6 million compared with the fair value at December 31, 2019. It is important to note that the change in fair value indicated in this sensitivity analysis would be somewhat offset by changes in the revaluation of the underlying receivables and payables.

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
The information required by this Item 8 is set forth in the Financial Statements and Supplementary Data contained in Part IV of this Annual Report on Form 10-K and is hereby incorporated herein by reference to such information.
Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
There were no disagreements with accountants on accounting and financial disclosure for the three-year period ended December 31, 20172019.


Item 9A. CONTROLS AND PROCEDURES
Evaluation of disclosure controls and procedures: An evaluation was carried out under the supervision and with the participation of the Company's management, including the principal executive officer and the principal financial officer, of the effectiveness of the Company's disclosure controls and procedures as of the end of the period covered by this report. Based on that evaluation, these officers have concluded that the Company's disclosure controls and procedures were effective.

Management's report on internal control over financial reporting: Management is responsible for establishing and maintaining adequate internal control over financial reporting. Under the supervision and with the participation of management, including the principal executive officer and principal financial officer, the Company conducted an evaluation of the effectiveness of internal control over financial reporting based on the framework in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 Framework). Based on this evaluation under the framework in Internal Control — Integrated Framework, management concluded that the Company's internal control over financial reporting was effective as of December 31, 2017.2019. The Company's effectiveness of internal control over financial reporting has been audited by Ernst & Young, LLP, an independent registered public accounting firm, as stated in its report, which is included in Item 15 of this Annual Report on Form 10-K and is incorporated herein by reference.
Changes in internal control: During the fourth quarter of 2017,2019, there have been no changes in the Company's internal control over financial reporting that have materially affected, or are reasonably likely to materially affect, the Company's internal control over financial reporting.
Item 9B. OTHER INFORMATION
None

None.
PART III


Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
Information with respect to Directorsrequired by this Item 10 of the CompanyPart III will be set forthincluded in the 20182020 Proxy Statement, under the subheadings “Part Two — Proposals to be Voted on at the 2018 Annual Meeting — Election of Directors (Proposal 1) — Director Nominee Information,” which information is incorporated herein by reference.
Information with respect to the audit review committee and the audit review committee financial expert will be set forth in the 2018 Proxy Statement under the subheading “Part One — Corporate Governance Information — Directors’ Meetings and Committees,” which information is incorporated herein by reference.
Information with respect to compliance with Section 16(a) of the Securities Exchange Act of 1934 by the Company's Directors, executive officers and holders of more than ten percent of the Company's equity securities will be set forth in the 2018 Proxy Statement under the subheading “Part Two — Proposals to be Voted on at the 2018 Annual Meeting — Election of Directors (Proposal 1) — Section 16(a) Beneficial Ownership Reporting Compliance,” which information is incorporated herein by reference.
Information regarding the executive officers of the Company is included in this Annual Report on Form 10-K as Item 4A of Part I as permitted by the Instruction 3 to Item 401(b)401 of Regulation S-K.
Information with respect to compensation committee interlocks and insider participation in compensation decisions will be set forth in the 2018 Proxy Statement under the subheading "Part Three — Executive Compensation Information — Compensation Discussion and Analysis — Compensation Committee Interlocks and Insider Participation," which information is incorporated herein by reference.
The Company has adopted a code of ethics applicable to all Company personnel, including the principal executive officer, principal financial officer, principal accounting officer and controller, or other persons performing similar functions. The code of ethics, entitled the “Code of Corporate Conduct,” is posted on the Company's website at www.hyster-yale.com under “Corporate Governance.” Amendments and waivers of the Company's Code of Corporate Conduct for directors or executive officers of the Company, if any, will be disclosed on the Company's website or on a current report on Form 8-K.

Item 11. EXECUTIVE COMPENSATION
Information with respect to executive compensationrequired by this Item 11 of Part III will be set forthincluded in the 20182020 Proxy Statement, under the subheadings “Part Two — Proposals to be Voted on at the 2018 Annual Meeting — Election of Directors (Proposal 1) — Director Compensation” and “Part Three — Executive Compensation Information,” which information is incorporated herein by reference.


Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
Information with respect to security ownershiprequired by this Item 12 of certain beneficial owners and managementPart III will be set forthincluded in the 20182020 Proxy Statement, under the heading “Beneficial Ownership of Class A Common and Class B Common,” which information is incorporated herein by reference.

Equity Compensation Plan Information
The following table sets forth information as of December 31, 20172019 with respect to our compensation plans (including individual compensation arrangements) under which equity securities are authorized for issuance, aggregated as follows:
Plan Category Number of Securities to Be Issued Upon Exercise of Outstanding Options, Warrants and Rights Weighted-Average Exercise Price of Outstanding Options, Warrants and Rights Number of Securities Remaining Available for Future Issuance Under Equity Compensation Plans (Excluding Securities Reflected in Column(a))
Class A Shares: (a) (b) (c)
Equity compensation plans approved by security holders 

 N/A 527,910409,063

Equity compensation plans not approved by security holders 

 N/A 

Total 

 N/A 527,910409,063

Class B Shares:      
Equity compensation plans approved by security holders 

 N/A 

Equity compensation plans not approved by security holders 

 N/A 

Total 

 N/A 



Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
Information with respect to director independence, certain relationships and related transactionsrequired by this Item 13 of Part III will be set forthincluded in the 20182020 Proxy Statement, under the subheading “Part One - Corporate Governance Information — Directors’ Meetings and Committees,” which information is incorporated herein by reference.


Item 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES
Information with respect to principal accountant fees and servicesrequired by this Item 14 of Part III will be set forthincluded in the 20182020 Proxy Statement, under the subheading “Part Two - Proposals to be Voted on at the 2018 Annual Meeting — Confirmation of Appointment of Ernst & Young, LLP, the Independent Registered Public Accounting Firm of the Company, for the Current Fiscal Year (Proposal 2)” which information is incorporated herein by reference.


PART IV

Item 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a) (1) The response to Item 15(a)(1) is set forth beginning at page F-1 of this Annual Report on Form 10-K.
(a) (2) The response to Item 15(a)(2) is set forth beginning at page F-45F-47 of this Annual Report on Form 10-K.
(a) (3) Listing of Exhibits — See the exhibit index beginning at page 3835 of this Annual Report on Form 10-K.
(b) The response to Item 15(b) is set forth beginning at page 3835 of this Annual Report on Form 10-K.

Table of Contents

EXHIBIT INDEX
(2) Plan of Acquisition, Reorganization, Arrangement, Liquidation or Succession.
2.1
2.2
2.3
(3) Articles of Incorporation and By-laws.
3.1(i) 
3.1(ii) 
(4) Instruments defining the rights of security holders, including indentures.
4.1 
4.2 
4.3
(10) Material Contracts.
10.1 
10.2
10.3
10.4
10.5
10.610.2 
10.710.3 

10.810.4 
10.910.5 
10.1010.6 
10.1110.7 
10.1210.8 
Table of Contents

10.13
10.9 
10.14*10.10 
10.11
10.12*
10.15*10.13* 
10.16*
10.17*10.14* 
10.18*10.15* 
10.19*10.16* 
10.20*10.17* 
10.21*10.18* 
10.22*10.19* 

10.23*
10.24*
10.25*10.20* 
10.21*
10.26*10.22* 
10.27*10.23* 
10.2810.24* 
10.2910.25* 
Table of Contents

10.26
10.3010.27 
10.31
10.32
10.3310.28 
10.34
10.35
10.36
10.37
10.38
10.39
10.4010.29 

10.4110.30 
10.42
10.43
10.44
10.45
10.46
10.47
10.48
10.49
10.5010.31 
10.5110.32 
10.5210.33 
10.53
10.5410.34 
10.35
10.36
10.37
Table of Contents

10.38

10.5510.39 
10.5610.40 
10.5710.41 
(21) Subsidiaries.
21.1 
(23) Consents of experts and counsel.
23.1 
(24) Powers of Attorney.
24.1 
24.2
24.224.3 
24.324.4 
24.424.5 
24.524.6 
24.624.7 
24.7
24.8 
24.9 
24.10
(31) Rule 13a-14(a)/15d-14(a) Certifications.
31(i)(1)  
31(i)(2)  
(32) 
101.INSInline XBRL Instance Document - The instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document
101.SCH Inline XBRL Taxonomy Extension Schema Document
101.CAL Inline XBRL Taxonomy Extension Calculation Linkbase Document
101.DEF Inline XBRL Taxonomy Extension Definition Linkbase Document
101.LAB Inline XBRL Taxonomy Extension Label Linkbase Document
101.PRE Inline XBRL Taxonomy Extension Presentation Linkbase Document
104Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101)
* Management contract or compensation plan or arrangement required to be filed as an exhibit pursuant to Item15(b) of this Annual Report on Form 10-K.

Item 16. FORM 10-K SUMMARY
None
Table of Contents

SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.


 Hyster-Yale Materials Handling, Inc. 
 By:  /s/ Kenneth C. Schilling   
  Kenneth C. Schilling  
  Senior Vice President and Chief Financial Officer (principal financial and accounting officer) 


February 27, 201825, 2020



Table of Contents

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.


/s/ Alfred M. Rankin, Jr. Chairman, President and Chief Executive Officer (principal executive officer), DirectorFebruary 27, 201825, 2020
Alfred M. Rankin, Jr.   
    
/s/ Kenneth C. Schilling Senior Vice President and Chief Financial Officer (principal financial and accounting officer)February 27, 201825, 2020
Kenneth C. Schilling
* James B. BemowskiDirector February 25, 2020
James B. Bemowski   
    
* J.C. Butler, Jr. Director February 27, 201825, 2020
J.C. Butler, Jr.   
    
* Carolyn Corvi Director February 27, 201825, 2020
Carolyn Corvi   
    
* John P. Jumper Director February 27, 201825, 2020
John P. Jumper   
    
* Dennis W. LaBarre Director February 27, 201825, 2020
Dennis W. LaBarre   
    
* H. Vincent Poor Director February 27, 201825, 2020
H. Vincent Poor   
    
* Claiborne R. Rankin Director February 27, 201825, 2020
Claiborne R. Rankin
* John M. StropkiDirector February 27, 2018
John M. Stropki   
    
* Britton T. Taplin Director February 27, 201825, 2020
Britton T. Taplin
* David B. H. WilliamsDirector February 25, 2020
David B. H. Williams   
    
* Eugene Wong DirectorFebruary 27, 201825, 2020
Eugene Wong   


 
* Kenneth C. Schilling, by signing his name hereto, does hereby sign this Annual Report on Form 10-K on behalf of each of the above named and designated directors of the Company pursuant to a Power of Attorney executed by such persons and filed with the Securities and Exchange Commission.


/s/ Kenneth C. Schilling  February 27, 201825, 2020
Kenneth C. Schilling, Attorney-in-Fact   


ANNUAL REPORT ON FORM 10-K
ITEM 8, ITEM 15(a)(1) AND (2)
FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
LIST OF FINANCIAL STATEMENTS AND FINANCIAL STATEMENT SCHEDULE
FINANCIAL STATEMENTS
FINANCIAL STATEMENT SCHEDULE
YEAR ENDED DECEMBER 31, 20172019
HYSTER-YALE MATERIALS HANDLING, INC.
CLEVELAND, OHIO



Table of Contents

FORM 10-K
ITEM 15(a)(1) AND (2)
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
LIST OF FINANCIAL STATEMENTS AND FINANCIAL STATEMENT SCHEDULE
The following consolidated financial statements of Hyster-Yale Materials Handling, Inc. and Subsidiaries are incorporated by reference in Item 8:
The following consolidated financial statement schedule of Hyster-Yale Materials Handling, Inc. and Subsidiaries are included in Item 15(a):
All other schedules for which provision is made in the applicable accounting regulation of the SEC are not required under the related instructions or are inapplicable, and therefore have been omitted.



Table of Contents

Report of Independent Registered Public Accounting Firm


To the Shareholders and the Board of Directors of Hyster-Yale Materials Handling, Inc.


Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Hyster-Yale Materials Handling, Inc. and Subsidiaries (“the Company”) as of December 31, 20172019 and 2016,2018, the related consolidated statements of operations, comprehensive income (loss), cash flows and equity for each of the three years in the period ended December 31, 2017,2019, and the related notes and financial statement schedule listed in the Index at Item 15(a) (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company at December 31, 20172019 and 2016,2018, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2017,2019, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of December 31, 2017,2019, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) and our report dated February 27, 201825, 2020 expressed an unqualified opinion thereon.


Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matter
The critical audit matter communicated below is a matter arising from the current period audit of the financial statements that was communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective or complex judgments. The communication of the critical audit matter does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the account or disclosure to which it relates.
Valuation of Goodwill
Description of the Matter
At December 31, 2019, the Company’s goodwill balance was $106.7 million. As discussed in Note 13, Goodwill and Intangible Assets, to the consolidated financial statements, the Company evaluates the carrying amount of goodwill for impairment annually as of May 1st and between annual evaluations if changes in circumstances or the occurrence of certain events indicate potential impairment. The Company applied a quantitative assessment for all material reporting units in fiscal 2019. As part of the quantitative approach, the Company estimates the fair value of the reporting unit using a discounted cash flow approach from the perspective of a market participant. Significant estimates within the discounted cash flow analysis include cash flow forecasts, the discount rate and the terminal business value.
Auditing management’s annual goodwill impairment assessment relating to goodwill amounts was complex and highly judgmental due to the significant estimation required to determine the fair value of the reporting units. In particular, the fair value estimate was sensitive to significant assumptions, such as changes in the discount rate applied, revenue growth rates, including the terminal growth rate, and operating margins, which are affected by expectations about future market or economic conditions.
Table of Contents

How We Addressed the Matter in Our Audit
We obtained an understanding and evaluated the design and tested the operating effectiveness of controls over the Company’s goodwill impairment and annual forecasting process whereby the Company develops significant assumptions that are used as inputs to the annual goodwill impairment test. This included controls over management's review of the valuation model and the significant assumptions (e.g., revenue, operating margin and terminal growth rate) used to develop the prospective financial information (PFI).
To test the implied fair value of the Company’s reporting units, we performed audit procedures that included, among others, assessing use of the discounted cash flow methodology and directly testing the significant assumptions and the underlying data used by the Company in its analysis, including assessing the completeness and accuracy of such underlying data. We utilized internal valuation specialists in assessing the fair value methodologies applied and evaluating the reasonableness of the discount rate selected by management. We compared the significant assumptions used by management to current industry and economic trends, historical performance, and strategic plans. We considered whether the assumptions were consistent with evidence obtained in other areas of the audit. We assessed the historical accuracy of management’s estimates, and we performed sensitivity analyses of significant assumptions to evaluate the changes in the fair value of the reporting units that would result from changes in the assumptions. Furthermore, we assessed the appropriateness of the disclosures in the consolidated financial statements.
/s/ Ernst & Young LLP  
We have served as the Company’s auditor since 2002.  
    
Cleveland, Ohio   
February 27, 201825, 2020   


Table of Contents

Report of Independent Registered Public Accounting Firm


To the Shareholders and the Board of Directors of Hyster-Yale Materials Handling, Inc.


Opinion on Internal Control over Financial Reporting


We have audited Hyster-Yale Materials Handling, Inc. and Subsidiaries' ("the Company") internal control over financial reporting as of December 31, 2017,2019, based on criteria established in Internal Control- Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the COSO criteria). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2017,2019, based on the COSO criteria.


We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated balance sheets of the Company as of December 31, 20172019 and 2016,2018, the related consolidated statements of operations, comprehensive income (loss), cash flows and equity for each of the three years in the period ended December 31, 20172019 and the related notes and financial statement schedule listed in the Index at Item 15(a) of the Company and our report dated February 27, 201825, 2020 expressed an unqualified opinion thereon.


Basis for Opinion


The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying management's report on internal control over financial reporting in Item 9A of the Form 10-K.9A. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.


We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.


Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.


Definition and Limitations of Internal Control Over Financial Reporting


A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.


Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ Ernst & Young LLP  
    
Cleveland, Ohio   
February 27, 201825, 2020  

Table of Contents

HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS
Year Ended December 31Year Ended December 31
2017 2016 20152019 2018 2017
(In millions, except per share data)(In millions, except per share data)
Revenues$2,885.2
 $2,569.7
 $2,578.1
$3,291.8
 $3,179.1
 $2,885.2
Cost of sales2,382.6
 2,142.2
 2,147.3
2,750.0
 2,682.1
 2,382.6
Gross Profit502.6
 427.5
 430.8
541.8
 497.0
 502.6
Operating Expenses          
Selling, general and administrative expenses426.6
 392.6
 327.3
487.9
 458.2
 428.5
Operating Profit76.0
 34.9
 103.5
53.9
 38.8
 74.1
Other (income) expense          
Interest expense14.6
 6.7
 4.7
19.8
 16.0
 14.6
Income from unconsolidated affiliates(28.0) (7.1) (6.1)(9.3) (10.0) (28.0)
Other, net(4.4) (3.0) 0.4
(4.5) (3.8) (6.3)
(17.8) (3.4) (1.0)6.0
 2.2
 (19.7)
Income Before Income Taxes93.8
 38.3
 104.5
47.9
 36.6
 93.8
Income tax provision (benefit)44.9
 (4.0) 29.4
Income tax provision11.3
 2.3
 44.9
Net Income48.9
 42.3
 75.1
36.6
 34.3
 48.9
Net (income) loss attributable to noncontrolling interest(0.3) 0.5
 (0.4)(0.8) 0.4
 (0.3)
Net Income Attributable to Stockholders$48.6
 $42.8
 $74.7
$35.8
 $34.7
 $48.6
          
Basic Earnings per Share Attributable to Stockholders$2.95
 $2.61
 $4.58
$2.15
 $2.10
 $2.95
Diluted Earnings per Share Attributable to Stockholders$2.94
 $2.61
 $4.57
$2.14
 $2.09
 $2.94
See Notes to Consolidated Financial Statements.

Table of Contents

HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
Year Ended December 31Year Ended December 31
2017 2016 20152019 2018 2017
(In millions)(In millions)
Net Income$48.9
 $42.3
 $75.1
$36.6
 $34.3
 $48.9
Other comprehensive income (loss)          
Foreign currency translation adjustment33.5
 (1.9) (49.7)(7.0) (27.4) 33.5
Unrealized gain on available-for-sale securities, net of $0.5 tax expense in 20172.8
 
 

 
 2.8
Current period cash flow hedging activity, net of $8.0 tax expense in 2017, net of $6.5 tax benefit in 2016 and net of $6.4 tax benefit in 20156.6
 (9.0) (4.7)
Reclassification of hedging activities into earnings, net of $1.6 tax expense in 2017, net of $2.2 tax expense in 2016 and net of $6.0 tax expense in 20154.1
 0.8
 2.7
Current period pension adjustment, net of $3.7 tax expense in 2017, net of $3.8 tax benefit in 2016 and net of $1.5 tax benefit in 201513.1
 (17.4) (3.4)
Reclassification of pension into earnings, net of $1.0 tax expense in 2017, net of $0.7 tax expense in 2016 and net of $0.9 tax expense in 20153.2
 2.0
 2.3
Comprehensive Income$112.2
 $16.8
 $22.3
Current period cash flow hedging activity, net of $5.9 tax benefit in 2019, net of $4.6 tax benefit in 2018 and net of $8.0 tax expense in 2017(15.9) (12.2) 6.6
Reclassification of hedging activities into earnings, net of $4.5 tax expense in 2019, net of $0.8 tax benefit in 2018 and net of $1.6 tax expense in 201712.0
 (1.8) 4.1
Current period pension adjustment, net of $0.1 tax expense in 2019, net of $4.3 tax benefit in 2018 and net of $3.7 tax expense in 20170.4
 (20.1) 13.1
Reclassification of pension into earnings, net of $0.8 tax expense in 2019, net of $0.7 tax expense in 2018 and net of $1.0 tax expense in 20173.2
 2.9
 3.2
Comprehensive Income (Loss)$29.3
 $(24.3) $112.2
Other comprehensive income (loss) attributable to noncontrolling interests          
Net (income) loss attributable to noncontrolling interests(0.3) 0.5
 (0.4)(0.8) 0.4
 (0.3)
Foreign currency translation adjustment attributable to noncontrolling interests(0.9) 2.2
 

 2.3
 (0.9)
Comprehensive Income Attributable to Stockholders$111.0
 $19.5
 $21.9
Comprehensive Income (Loss) Attributable to Stockholders$28.5
 $(21.6) $111.0
See Notes to Consolidated Financial Statements.



Table of Contents

HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
December 31December 31
2017 20162019 2018
(In millions, except share data)(In millions, except share data)
ASSETS      
Current Assets      
Cash and cash equivalents$220.1
 $43.2
$64.6
 $83.7
Accounts receivable, net of allowances of $3.7 in 2017 and $10.3 in 2016453.0
 375.3
Accounts receivable, net of allowances of $5.6 in 2019 and $5.4 in 2018468.3
 465.5
Inventories, net411.9
 352.2
559.9
 533.6
Prepaid expenses and other46.4
 39.3
63.0
 48.8
Total Current Assets1,131.4
 810.0
1,155.8
 1,131.6
Property, Plant and Equipment, Net265.4
 255.1
308.5
 296.2
Intangible Assets56.1
 56.2
60.1
 67.7
Goodwill59.1
 50.7
106.7
 108.3
Deferred Income Taxes16.6
 43.9
30.8
 26.3
Investment in Unconsolidated Affiliates81.9
 45.9
80.0
 75.6
Other Non-current Assets37.4
 25.3
105.3
 36.4
Total Assets$1,647.9
 $1,287.1
$1,847.2
 $1,742.1
LIABILITIES AND EQUITY      
Current Liabilities      
Accounts payable$385.8
 $242.4
$401.5
 $415.5
Accounts payable, affiliates18.1
 16.5
15.6
 21.3
Revolving credit facilities6.1
 79.0
7.7
 13.3
Current maturities of long-term debt68.4
 50.0
74.6
 78.1
Accrued payroll51.7
 43.7
66.1
 56.3
Deferred revenue49.1
 37.6
Other current liabilities162.3
 144.9
202.4
 154.1
Total Current Liabilities692.4
 576.5
817.0
 776.2
Long-term Debt216.2
 82.2
204.7
 210.1
Self-insurance Liabilities33.5
 19.7
31.4
 25.2
Pension Obligations11.1
 37.2
13.5
 23.1
Deferred Income Taxes13.0
 11.4
15.4
 17.8
Other Long-term Liabilities109.3
 89.7
188.2
 130.2
Total Liabilities1,075.5
 816.7
1,270.2
 1,182.6
Stockholders’ Equity
  
  
Common stock:      
Class A, par value $0.01 per share, 12,562,817 shares outstanding (2016 - 12,466,463 shares outstanding)0.1
 0.1
Class B, par value $0.01 per share, convertible into Class A on a one-for-one basis, 3,899,503 shares outstanding (2016 - 3,924,291 shares outstanding)0.1
 0.1
Class A, par value $0.01 per share, 12,802,455 shares outstanding (2018 - 12,682,755 shares outstanding)0.1
 0.1
Class B, par value $0.01 per share, convertible into Class A on a one-for-one basis, 3,864,462 shares outstanding (2018 - 3,877,967 shares outstanding)0.1
 0.1
Capital in excess of par value323.8
 319.6
321.3
 321.5
Treasury stock(31.5) (36.9)(15.9) (24.1)
Retained earnings389.1
 360.3
427.4
 407.3
Accumulated other comprehensive loss(116.1) (179.4)(188.7) (177.5)
Total Stockholders’ Equity565.5
 463.8
544.3
 527.4
Noncontrolling Interest6.9
 6.6
32.7
 32.1
Total Equity572.4
 470.4
577.0
 559.5
Total Liabilities and Equity$1,647.9
 $1,287.1
$1,847.2
 $1,742.1
See Notes to Consolidated Financial Statements.

Table of Contents

HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
Year Ended December 31Year Ended December 31
2017 2016 20152019 2018 2017
(In millions)(In millions)
Operating Activities          
Net income$48.9
 $42.3
 $75.1
$36.6
 $34.3
 $48.9
Adjustments to reconcile net income to net cash provided (used for) by operating activities:     
Adjustments to reconcile net income to net cash provided by operating activities:     
Depreciation and amortization42.8
 39.1
 28.9
43.3
 44.0
 42.8
Amortization of deferred financing fees1.4
 1.1
 1.2
1.9
 1.7
 1.4
Deferred income taxes8.1
 (7.4) (1.4)(6.8) (3.2) 8.1
Gain on sale of assets(0.3) (0.3) 
0.1
 (0.3) (0.3)
Stock-based compensation8.8
 4.9
 2.9
8.2
 5.7
 8.8
Long-lived and intangible assets impairment charge4.9
 
 

 
 4.9
Dividends from unconsolidated affiliates2.8
 5.1
 2.5
5.1
 22.2
 2.8
Other non-current liabilities4.8
 (6.0) 3.8
(5.5) (9.4) 4.8
Other(13.3) (15.1) 1.0
20.4
 8.8
 (13.3)
Working capital changes, excluding the effect of business acquisitions:          
Accounts receivable(44.0) (27.5) 6.2
(9.6) 58.0
 (44.0)
Inventories(43.6) (14.9) 6.2
(37.9) (125.4) (43.6)
Other current assets(1.0) (3.2) (0.6)(1.2) 1.3
 (1.0)
Accounts payable125.1
 (53.8) (39.3)1.9
 23.3
 125.1
Other liabilities19.3
 (13.2) 2.9
20.2
 6.6
 19.3
Net cash provided by (used for) operating activities164.7
 (48.9) 89.4
Net cash provided by operating activities76.7
 67.6
 164.7
Investing Activities          
Expenditures for property, plant and equipment(41.0) (42.7) (46.6)(49.7) (38.8) (41.0)
Proceeds from the sale of assets1.3
 13.7
 14.4
7.7
 5.9
 1.3
Business acquisitions, net of cash acquired
 (78.0) (1.0)
Investments in equity securities(5.6) 
 

 
 (5.6)
Business acquisition, net of cash acquired(1.0) (116.1) 0.9
Purchase of noncontrolling interest(1.0) 
 

 
 (1.0)
Net cash used for investing activities(47.3) (145.1) (31.3)(42.0) (110.9) (47.3)
Financing Activities          
Additions to long-term debt265.6
 40.1
 46.4
67.6
 71.5
 265.6
Reductions of long-term debt(75.9) (56.5) (35.0)(92.1) (143.7) (75.9)
Net additions (reductions) to revolving credit agreements(111.7) 115.4
 
(5.3) 6.5
 (111.7)
Cash dividends paid(19.8) (19.2) (18.4)(21.0) (20.4) (19.8)
Cash dividends paid to noncontrolling interest(0.3) (0.2) 
(0.2) (0.3) (0.3)
Financing fees paid(4.7) (1.7) 
(0.4) (0.6) (4.7)
Other(0.1) 
 (0.1)(0.2) (0.6) (0.1)
Net cash provided by (used for) financing activities53.1
 77.9
 (7.1)(51.6) (87.6) 53.1
Effect of exchange rate changes on cash6.4
 4.2
 (7.3)(2.2) (5.5) 6.4
Cash and Cash Equivalents          
Increase (decrease) for the year176.9
 (111.9) 43.7
(19.1) (136.4) 176.9
Balance at the beginning of the year43.2
 155.1
 111.4
83.7
 220.1
 43.2
Balance at the end of the year$220.1
 $43.2
 $155.1
$64.6
 $83.7
 $220.1
See Notes to Consolidated Financial Statements.

Table of Contents
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF EQUITY

 Accumulated Other Comprehensive Income (Loss)       Accumulated Other Comprehensive Income (Loss)      
Class A Common StockClass B Common StockTreasury StockCapital in Excess of Par ValueRetained EarningsForeign Currency Translation Adjustment Deferred Gain on AFS SecuritiesDeferred Gain (Loss) on Cash Flow HedgingPension AdjustmentTotal Stockholders' EquityNoncontrolling InterestTotal EquityClass A Common StockClass B Common StockTreasury StockCapital in Excess of Par ValueRetained EarningsForeign Currency Translation Adjustment Deferred Gain on AFS SecuritiesDeferred Gain (Loss) on Cash Flow HedgingPension AdjustmentTotal Stockholders' EquityNoncontrolling InterestTotal Equity
(In millions)(In millions)
Balance, January 1, 2015$0.1
$0.1
$(49.1)$324.1
$280.4
$(40.4) $
 $(2.0) $(58.7) $454.5
 $1.5
 $456.0
Stock-based compensation


2.9


 
 
 
 2.9
 
 2.9
Stock issued under stock compensation plans

6.7
(6.7)

 
 
 
 
 
 
Purchase of treasury stock

(0.1)


 
 
 
 (0.1) 
 (0.1)
Net income



74.7

 
 
 
 74.7
 0.4
 75.1
Cash dividends on common stock



(18.4)
 
 
 
 (18.4) 
 (18.4)
Current period other comprehensive income (loss)




(49.7) 
 (4.7) (3.4) (57.8) 
 (57.8)
Reclassification adjustment to net income





 
 2.7
 2.3
 5.0
 
 5.0
Balance, December 31, 2015$0.1
$0.1
$(42.5)$320.3
$336.7
$(90.1) $
 $(4.0) $(59.8) $460.8
 $1.9
 $462.7
             
Stock-based compensation


4.9


 
 
 
 4.9
 
 4.9
Stock issued under stock compensation plans

5.6
(5.6)

 
 
 
 
 
 
Net income



42.8

 
 
 
 42.8
 (0.5) 42.3
Cash dividends



(19.2)
 
 
 
 (19.2) (0.2) (19.4)
Current period other comprehensive income (loss)




(1.9) 
 (9.0) (17.4) (28.3) 
 (28.3)
Reclassification adjustment to net income





 
 0.8
 2.0
 2.8
 
 2.8
Acquisition of Bolzoni





 
 
 
 
 69.8
 69.8
Purchase of noncontrolling interest





 
 
 
 
 (62.2) (62.2)
Foreign currency translation on noncontrolling interest





 
 
 
 
 (2.2) (2.2)
Balance, December 31, 2016$0.1
$0.1
$(36.9)$319.6
$360.3
$(92.0) $
 $(12.2) $(75.2) $463.8
 $6.6
 $470.4
             
Balance, January 1, 2017$0.1
$0.1
$(36.9)$319.6
$360.3
$(92.0) $
 $(12.2) $(75.2) $463.8
 $6.6
 $470.4
Stock-based compensation


8.8


 
 
 
 8.8
 
 8.8



8.8


 
 
 
 8.8
 
 8.8
Stock issued under stock compensation plans

5.4
(5.4)

 
 
 
 
 
 


5.4
(5.4)

 
 
 
 
 
 
Net income (loss)



48.6

 
 
 
 48.6
 0.3
 48.9




48.6

 
 
 
 48.6
 0.3
 48.9
Cash dividends



(19.8)
 
 
 
 (19.8) (0.3) (20.1)



(19.8)
 
 
 
 (19.8) (0.3) (20.1)
Current period other comprehensive income (loss)




33.5
 2.8
 6.6
 13.1
 56.0
 
 56.0





33.5
 2.8
 6.6
 13.1
 56.0
 
 56.0
Reclassification adjustment to net income





 
 4.1
 3.2
 7.3
 
 7.3






 
 4.1
 3.2
 7.3
 
 7.3
Acquisition of business





 
 
 
 
 0.3
 0.3






 
 
 
 
 0.3
 0.3
Purchase of noncontrolling interest


0.8


 
 
 
 0.8
 (0.9) (0.1)


0.8


 
 
 
 0.8
 (0.9) (0.1)
Foreign currency translation on noncontrolling interest





 
 
 
 
 0.9
 0.9






 
 
 
 
 0.9
 0.9
Balance, December 31, 2017$0.1
$0.1
$(31.5)$323.8
$389.1
$(58.5) $2.8
 $(1.5) $(58.9) $565.5
 $6.9
 $572.4
$0.1
$0.1
$(31.5)$323.8
$389.1
$(58.5) $2.8
 $(1.5) $(58.9) $565.5
 $6.9
 $572.4
             
Cumulative effect of change in accounting



3.9

 (2.8) 
 
 1.1
 
 1.1
Stock-based compensation


5.7


 
 
 
 5.7
 
 5.7
Stock issued under stock compensation plans

8.0
(8.0)

 
 
 
 
 
 
Purchase of treasury stock

(0.6)


 
 
 
 (0.6) 
 (0.6)
Net income (loss)



34.7

 
 
 
 34.7
 (0.4) 34.3
Cash dividends



(20.4)
 
 
 
 (20.4) (0.3) (20.7)
Current period other comprehensive income (loss)




(27.4) 
 (12.2) (20.1) (59.7) 
 (59.7)
Reclassification adjustment to net income





 
 (1.8) 2.9
 1.1
 
 1.1
Acquisition of business





 
 
 
 
 28.2
 28.2
Foreign currency translation on noncontrolling interest





 
 
 
 
 (2.3) (2.3)
Balance, December 31, 2018$0.1
$0.1
$(24.1)$321.5
$407.3
$(85.9) $
 $(15.5) $(76.1) $527.4
 $32.1
 $559.5
             

Table of Contents
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF EQUITY

      Accumulated Other Comprehensive Income (Loss)      
 Class A Common StockClass B Common StockTreasury StockCapital in Excess of Par ValueRetained EarningsForeign Currency Translation Adjustment Deferred Gain on AFS SecuritiesDeferred Gain (Loss) on Cash Flow HedgingPension AdjustmentTotal Stockholders' EquityNoncontrolling InterestTotal Equity
 (In millions)
Balance, December 31, 2018$0.1
$0.1
$(24.1)$321.5
$407.3
$(85.9) $
 $(15.5) $(76.1) $527.4
 $32.1
 $559.5
Cumulative effect of change in accounting



5.3

 
 0.9
 (4.8) 1.4
 
 1.4
Stock-based compensation


8.2


 
 
 
 8.2
 
 8.2
Stock issued under stock compensation plans

8.4
(8.4)

 
 
 
 
 
 
Purchase of treasury stock

(0.2)


   
 
 (0.2) 
 (0.2)
Net income (loss)



35.8

 
 
 
 35.8
 0.8
 36.6
Cash dividends



(21.0)
 
 
 
 (21.0) (0.2) (21.2)
Current period other comprehensive income (loss)




(7.0) 
 (15.9) 0.4
 (22.5) 
 (22.5)
Reclassification adjustment to net income





 
 12.0
 3.2
 15.2
 
 15.2
Balance, December 31, 2019$0.1
$0.1
$(15.9)$321.3
$427.4
$(92.9) $
 $(18.5) $(77.3) $544.3
 $32.7
 $577.0

See Notes to Consolidated Financial Statements.




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)




NOTE 1—Principles of Consolidation and Nature of Operations
The consolidated financial statements include the accounts of Hyster-Yale Materials Handling, Inc., a Delaware corporation, and the accounts of Hyster-Yale's wholly owned domestic and international subsidiaries and majority-owned joint ventures (collectively, "Hyster-Yale" or the "Company"). All intercompany accounts and transactions among the consolidated companies are eliminated in consolidation.


The Company, through its wholly owned operating subsidiary, Hyster-Yale Group, Inc. ("HYG"), designs, engineers, manufactures, sells and services a comprehensive line of lift trucks and aftermarket parts marketed globally primarily under the Hyster® and Yale® brand names, mainly to independent Hyster® and Yale® retail dealerships. Lift trucks and component parts are manufactured in the United States, China, Northern Ireland, Mexico, the Netherlands, Italy, Vietnam, the Philippines, Italy, Japan, BrazilVietnam and China.Brazil. The sale of service parts represents approximately 13%12% of total revenues as reported for each2019 and 13% for 2018 and 2017, respectively.

On June 1, 2018, the Company completed the acquisition of 2017, 2016a 75% majority interest in Hyster-Yale Maximal Forklift (Zhejiang) Co., Ltd. ("Hyster-Yale Maximal"). Hyster-Yale Maximal is a Chinese manufacturer of low-intensity and 2015.standard lift trucks and specialized material handling equipment. Hyster-Yale Maximal also designs and produces specialized products in the port equipment and rough terrain forklift markets. The results of Hyster-Yale Maximal are included in the JAPIC segment since the date of acquisition.


The Company operates Bolzoni S.p.A. ("Bolzoni"). Bolzoni is a leading worldwide producer and distributor of attachments, forks and lift tables marketed under the Bolzoni Auramo®, Auramo® and Meyer® brand names. Bolzoni products are manufactured in the United States, Italy, China, Germany Finland and the United States.Finland. Through the design, production and distribution of a wide range of attachments, Bolzoni has a strong presence in the market niche of lift-truck attachments and industrial material handling.


In 2019, as part of a plan to expand Bolzoni's capabilities in the United States, Bolzoni's North America attachment manufacturing moved into HYG's Sulligent, Alabama manufacturing facility. As a result, effective January 1, 2019, the Sulligent facility became a Bolzoni facility. Accordingly, the results of the Sulligent facility in 2019 have been included in the Bolzoni segment and the historical results of operations of the Sulligent facility for 2018 and 2017 have been included in the Bolzoni segment.

The Company operates Nuvera Fuel Cells, LLC ("Nuvera"). Nuvera is an alternative-power technology company focused on the design, manufacture and sale of hydrogen fuel-cell stacks and engines. Nuvera also supports on-site hydrogen production and dispensing systems that are designed to deliver clean energy solutions to customers.  
Investments in Sumitomo NACCO Forklift Co., Ltd. (“SN”("SN"), a 50% owned joint venture, and HYG Financial Services, Inc. ("HYGFS"), a 20% owned joint venture, are accounted for by the equity method. SN operates manufacturing facilities in Japan, the Philippines and Vietnam from which the Company purchases certain components, service parts and lift trucks. Sumitomo Heavy Industries, Ltd. owns the remaining 50% interest in SN. Each stockholder of SN is entitled to appoint directors representing 50% of the vote of SN’s board of directors. All matters related to policies and programs of operation, manufacturing and sales activities require mutual agreement between the Company and Sumitomo Heavy Industries, Ltd. prior to a vote of SN’s board of directors. HYGFS is a joint venture with Wells Fargo Financial Leasing, Inc. (“WF”("WF"), formed primarily for the purpose of providing financial services to independent Hyster® and Yale® lift truck dealers and National Account customers in the United States. National Account customers are large customers with centralized purchasing and geographically dispersed operations in multiple dealer territories. The Company’s percentage share of the net income or loss from these equity investments is reported on the line “Income from unconsolidated affiliates” in the “Other income (expense)” portion of the Consolidated Statements of Operations.


NOTE 2—Significant Accounting Policies
Use of Estimates:  The preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and judgments. These estimates and judgments affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities (if any) at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.
Cash and Cash Equivalents:  Cash and cash equivalents include cash in banks and highly liquid investments with original maturities of three months or less.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

Accounts Receivable, Net of Allowances:  Allowances are maintained against accounts receivable for doubtful accounts. Allowances for doubtful accounts are maintained for estimated losses resulting from the inability of customers to make required payments. These allowances are based on both recent trends of certain customers estimated to be a greater credit risk as well as general trends of the entire customer pool. Accounts are written off against the allowance when it becomes evident collection will not occur.
Self-insurance Liabilities:  The Company is generally self-insured for product liability, environmental liability and medical and workers’ compensation claims. For product liability, catastrophic insurance coverage is retained for potentially significant individual claims. The Company also has insurance for certain historic product liability claims. An estimated provision for claims reported and for claims incurred but not yet reported under the self-insurance programs is recorded and revised periodically based on industry trends, historical experience and management judgment. In addition, industry trends are considered within management judgment for valuing claims. Changes in assumptions

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

for such matters as legal judgments and settlements, legal defense costs, inflation rates, medical costs and actual experience could cause estimates to change in the near term.
Revenue Recognition:  Revenues are recognized based upon the terms of contracts with customers, which is generally when title transfers and risk of loss passes as customer orders are completed and shipped. For National Account customers, revenue is recognized upon customer acceptance.
Products generally are not sold with the right of return with the exception of a small percentage of aftermarket parts. Based on the Company’s historical experience, a portion of these aftermarket parts sold is estimated to be returned and, subject to certain terms and conditions, the Company will agree to accept. The Company records estimated reductions to revenues at the time of the sale based upon this historical experience and the limited right of return provided to the Company’s dealers.
The Company also records estimated reductions to revenues for customer programs and incentive offerings, including special pricing agreements, price competition, promotions and other volume-based incentives. Lift truck sales revenue is recorded net of estimated discounts. The estimated discount amount is based upon historical trends for each lift truck model. In addition to standard discounts, dealers can also request additional discounts that allow them to offer price concessions to customers. From time to time, the Company offers special incentives to increase market share or dealer stock and offers certain customers volume rebates if a specified cumulative level of purchases is obtained. Additionally, the Company provides for the estimated cost of product warranties at the time revenues are recognized.
Advertising Costs:  Advertising costs are expensed as incurred. Total advertising expense was $10.8$10.7 million, $10.814.6 million and $11.711.2 million in 20172019, 20162018 and 20152017, respectively.
Product Development Costs:  Expenses associated with the development of new products and changes to existing products are charged to expense as incurred. These costs amounted to $104.5$115.3 million, $107.0110.9 million and $88.3104.5 million in 20172019, 20162018 and 20152017, respectively.
Shipping and Handling Costs:  Shipping and handling costs billed to customers are recognized as revenue and shipping and handling costs incurred by the Company are included on the line “Cost of sales” within the Consolidated Statements of Operations.
Taxes Collected from Customers and Remitted to Governmental Authorities:  The Company collects various taxes and fees as an agent in connection with the sale of products and remits these amounts to the respective taxing authorities. These taxes and fees have been presented on a net basis in the Consolidated Statements of Operations and are recorded as an asset or liability until received by or remitted to the respective taxing authority.
Foreign Currency:  Assets and liabilities of non-U.S. operations are translated into U.S. dollars at the fiscal year-end exchange rate. The related translation adjustments are recorded as a separate component of equity, except for the Company’s Mexican operations. The U.S. dollar is considered the functional currency for the Company’s Mexican operations and, therefore, the effect of translating assets and liabilities from the Mexican peso to the U.S. dollar is recorded in results of operations. Revenues and expenses of all non-U.S. operations are translated using average monthly exchange rates prevailing during the year.
Reclassification:  Certain amounts in the prior period’s audited consolidated financial statements have been reclassified to conform to the current period’s presentation.

The following table includes other significant accounting policies that are described in other notes to the consolidated financial statements, including the footnote number:
Significant Accounting PolicyNote
Revenue RecognitionRevenue Recognition (Note 3)
Reportable segmentsBusiness Segments (Note 4)
Stock-based compensationCommon Stock and Earnings per Share (Note 6)
Income taxesIncome Taxes (Note 7)
Derivatives and hedging activitiesFinancial Instruments and Derivative Financial Instruments (Note 9)
Fair value of financial instruments
Financial Instruments and Derivative Financial Instruments (Note 9)
 and Retirement Benefit Plans (Note 10)
PensionRetirement Benefit Plans (Note 10)
InventoriesInventories (Note 11)
Property, plant and equipmentProperty, Plant and Equipment, Net (Note 12)
Impairment or disposal of long-lived assetsProperty, Plant and Equipment, Net (Note 12)
Goodwill and intangible assetsGoodwill and Intangible Assets (Note 13)
ContingenciesContingencies (Note 17)


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

The following table includes other significant accounting policies that are described in other notes to the consolidated financial statements, including the footnote number:
Significant Accounting PolicyNote
Reportable segmentsBusiness Segments (Note 3)
Stock-based compensationCommon Stock and Earnings per Share (Note 5)
Income taxesIncome Taxes (Note 6)
Derivatives and hedging activitiesFinancial Instruments and Derivative Financial Instruments (Note 8)
Fair value of financial instruments
Financial Instruments and Derivative Financial Instruments (Note 8)
 and Retirement Benefit Plans (Note 9)
PensionRetirement Benefit Plans (Note 9)
InventoriesInventories (Note 10)
Property, plant and equipmentProperty, Plant and Equipment, Net (Note 11)
Impairment or disposal of long-lived assetsProperty, Plant and Equipment, Net (Note 11)
Goodwill and intangible assetsGoodwill and Intangible Assets (Note 12)
ContingenciesContingencies (Note 16)

Recently Issued Accounting Standards


The following table provides a brief description of recent accounting pronouncements adopted January 1, 2017. The2019. Unless otherwise noted, the adoption of these standards did not have a material effect on the Company's financial position, results of operations, cash flows or related disclosures.
Standard Description
ASU No. 2015-11, Inventory (Topic 330): Simplifying the Measurement of InventoryThe guidance requires inventory to be measured at the lower of cost or net realizable value. The guidance defines net realizable value as the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation.
ASU No. 2016-05, Derivatives and Hedging (Topic 815): Effect of Derivative Contract Novations on Existing Hedge Accounting RelationshipsThe guidance clarifies that a change in the counterparty to a derivative instrument that has been designated as the hedging instrument does not, in and of itself, require dedesignation of that hedging relationship, provided that all other hedge accounting criteria continue to be met.
ASU No. 2016-07, Investments - Equity Method and Joint Ventures (Topic 323)The guidance eliminates the requirement that an entity retroactively adopt the equity method of accounting if an investment qualifies for use of the equity method as a result of an increase in the level of ownership or degree of influence. In addition, the guidance requires that the equity method investor add the cost of acquiring the additional interest in the investee to the current basis of the investor’s previously held interest and adopt the equity method of accounting as of the date the investment becomes qualified for equity method accounting.
ASU No. 2016-09, Stock Compensation (Topic 718): Improvements to Employee Share-Based Payment AccountingThe guidance simplifies several aspects of the accounting for employee share-based payment transactions, including the income tax consequences, classification of awards as either equity or liabilities, and classification on the statement of cash flows.


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

The following table provides a brief description of recent accounting pronouncements not yet adopted:
StandardDescriptionRequired Date of AdoptionEffect on the financial statements or other significant matters
ASU No. 2014-09, Revenue from Contracts with Customers (Topic 606) (Subsequent ASUs have been issued in 2015, 2016 and 2017 to update or clarify this guidance)The new guidance is based on the principle that revenue is recognized to depict the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. The new guidance also requires additional disclosures about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and changes in judgments and assets recognized from costs incurred to obtain or fulfill a contract.January 1, 2018The Company's evaluation process of the new standard included, but was not limited to, identifying contracts and revenue streams within the scope of the guidance, reviewing and documenting the accounting and identifying and determining the accounting for any related contract costs and variable consideration. The Company has documented this evaluation and has implemented processes and controls for certain revenue streams as warranted by the guidance. The Company adopted the standard on January 1, 2018 using the modified retrospective approach and recorded a cumulative adjustment to retained earnings for open contracts as of January 1, 2018. The adoption of the standard did not have a material impact on the Company's consolidated financial statements. The Company will provide the new disclosures required by the standard in the Company's March 31, 2018 Quarterly Report on Form 10-Q.
ASU No. 2016-01, Financial Instruments-Overall (Subtopic 825-10): Recognition and Measurement of Financial Assets and Financial LiabilitiesThe guidance requires equity investments previously accounted for under the cost method of accounting to be measured at fair value and recognized in net income. In addition, the guidance defines measurement and presentation of financial instruments.January 1, 2018The Company anticipates the adoption will increase the volatility of other (income) expense as a result of applying the guidance. The Company recorded a cumulative adjustment to retained earnings for deferred gains related to equity investments in third-parties as of January 1, 2018 of $3.6 million. Subsequent changes in the fair value of these investments will be recognized directly in earnings.
ASU No. 2016-15, Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash PaymentsThe guidance clarifies the classification of certain types of cash receipts and cash payments. In addition, the guidance provides for the application of the predominance principle when certain cash receipts and payments have aspects of more than one class of cash flows.January 1, 2018The adoption of the guidance did not have a material effect on the Company's financial position, results of operations, cash flows or related disclosures.
ASU No. 2016-16, Income Taxes (Topic 740)The guidance allows for recognition of current and deferred income taxes for an intra-entity transfer of an asset other than inventory. The guidance allows for more accurate representation of the economics of an intra-entity asset transfer which will require income tax consequences of the transfer, including income taxes payable or paid.January 1, 2018The adoption of the guidance did not have a material effect on the Company's financial position, results of operations, cash flows or related disclosures.
ASU No. 2016-18, Statement of Cash Flows (Topic 230): Restricted CashThe guidance requires that a statement of cash flows explain the change during the period in the total of cash, cash equivalents, and amounts generally described as restricted cash or restricted cash equivalents.January 1, 2018The adoption of the guidance did not have a material effect on the Company's financial position, results of operations, cash flows or related disclosures.
ASU No. 2017-01, Business Combinations (Topic 805): Clarifying the Definition of a BusinessThe guidance clarifies the definition of a business to assist entities in evaluating whether transactions should be accounted for as acquisitions or disposals of businesses.January 1, 2018The adoption of the guidance did not have a material effect on the Company's financial position, results of operations, cash flows or related disclosures.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

StandardDescriptionRequired Date of AdoptionEffect on the financial statements or other significant matters
ASU 2017-05, Other Income – Gains and Losses from the Derecognition of Nonfinancial Assets (Subtopic 610-20): Clarifying the Scope of Asset DerecognitionThe guidance clarifies the scope and accounting of a financial asset that meets the definition of an "in-substance nonfinancial asset" and defines the term, "in-substance nonfinancial asset," in addition to partial sales of nonfinancial assets.January 1, 2018The adoption of the guidance did not have a material effect on the Company's financial position, results of operations, cash flows or related disclosures.
ASU 2017-07, Compensation — Retirement Benefits (Topic 715): Improving the Presentation of Net Periodic Pension Cost and Net Periodic PostretirementThe guidance requires that an employer report the service cost component in the same line item or items as other compensation costs arising from services rendered by the pertinent employees during the period. The other components of net benefit cost are required to be presented in the income statement separately from the service cost component and outside a subtotal of income from operations.January 1, 2018The Company will present the components of net benefit cost, other than service cost, in other (income) expense for its pension plans starting on January 1, 2018. Service cost for the Company's pension plans will continue to be reported in operating profit.
ASUStandards Update ("ASU") No. 2016-02, Leases (Topic 842)(Subsequent ASUs have been issued in 2017, 2018 and 2019 to update or clarify this guidance) The guidance requires lessees (with the exception of short-term leases) to recognize, at the commencement date, a lease liability, which is a lessee's obligation to make lease payments arising from a lease, measured on a discounted basis; and a right-of-use asset, which is an asset that represents the lessee’s right to use, or control the use of, a specified asset for the lease term.January 1, 2019The Company's evaluation process of the new standard includes, but is not limited to, evaluating its current lease portfolio, identifying relevant contracts and attributes affected by the standard and determining the required accounting upon adoption. In addition, the Company expects to implement new processes and controls regarding asset financing transactions and financial reporting. The Company continues to evaluate its global leasing portfolio and train relevant personnel. In addition, the Company has started abstraction of key attributes within lease contracts and began to evaluate systems-related requirements See Note 15 for the new standard. This evaluation will continue throughout 2018. While the Company's evaluation of the alternative methods of adoption, practical expedients and the effect on its financial position, results of operations, cash flows and related disclosures is ongoing; the Company anticipates the adoption will materially affect the consolidated balance sheets and will require changes to the Company's systems and processes.additional information.
ASU 2017-12, Derivatives and Hedging (Topic 815): Targeted Improvements to Accounting for Hedging Activities The guidance makes targeted changes to the hedge accounting model intended to facilitate financial reporting that more closely reflects an entity’s risk management activities and to simplify the application of hedge accounting. Changes include expanding the types of risk management strategies eligible for hedge accounting, easing the documentation and effectiveness assessment requirements, changing how ineffectiveness is measured and changing the presentation and disclosure requirements for hedge accounting activities.
January 1, 2019The Company is currently evaluating the guidance and the effect on its financial position, results of operations, cash flows and related disclosures.
ASU 2018-02, Reclassification of Certain Tax Effects from Accumulated Other Comprehensive Income ("OCI") The guidance provides an election to reclassify the stranded tax effects resulting from the Tax Cuts and Jobs Act (the “Tax Reform ActAct”) from OCI to retained earnings. In addition, the guidance requires new disclosures regarding the election to adopt and the manner in which tax effects remaining in OCI are released. The Company adopted the standard on January 1, 2019 and recorded a cumulative adjustment to retained earnings of $3.9 million for income tax benefits stranded in OCI resulting from the Tax Reform Act.
ASU 2018-07, Compensation-Stock Compensation (Topic 718) The Company is currently evaluatingguidance addresses the accounting for non-employee share-based payment transactions.
ASU 2018-16, Derivatives and Hedging (Topic 815): Inclusion of the Secured Overnight Financing Rate (SOFR) Overnight Index Swap (OIS) Rate as a Benchmark Interest Rate for Hedge Accounting PurposesThe guidance permits the use of the OIS rate based on SOFR as a U.S. benchmark interest rate for hedge accounting purposes in addition to treasury obligations of the U.S. government, the LIBOR swap rate, the OIS rate based on the Federal Funds Effective Rate, and the effect on its financial position, results of operations, cash flowsSecurities Industry and related disclosures.Financial Markets Association Municipal Swap Rate.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

The following table provides a brief description of recent accounting pronouncements not yet adopted:
Standard Description Required Date of Adoption Effect on the financial statements or other significant matters
ASU No. 2016-13, Financial Instruments-Credit Losses (Topic 326)(Subsequent ASUs have been issued in 2018 and 2019 to update or clarify this guidance) The guidance eliminates the probable initial recognition threshold and requires an entity to reflect its current estimate of all expected credit losses. The guidance also requires additional disclosures in certain circumstances. January 1, 2020 The Company's evaluation process of the new standard included, but was not limited to, identifying the financial assets affected by the standard and determining the required accounting upon adoption. The Company has evaluated its portfolio and acceptable credit loss models in the standard and continues to refine its processes and controls. The Company does not expect the adoption of the guidance to have a material effect on its financial position, results of operations, and cash flows. The Company is currently evaluating additional disclosures which may be required for the alternative methodsfirst quarter 2020 Form 10-Q.
ASU 2018-17, Consolidation (Topic 810): Targeted Improvements to Related Party Guidance for Variable Interest EntitiesThe guidance provides that indirect interests held through related parties in common control arrangements should be considered on a proportional basis for determining whether fees paid to decision makers and service providers are variable interests.
January 1, 2020The adoption of adoption and the guidance will not have a material effect on itsthe Company's financial position, results of operations, cash flows and related disclosures.


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

StandardDescriptionRequired Date of AdoptionEffect on the financial statements or other significant matters
ASU 2018-18, Collaborative Arrangements (Topic 808): Clarifying the Interaction between Topic 808 and Topic 606The guidance clarifies the accounting for collaborative arrangements in conjunction with the adoption of "Revenue from Contracts with Customers (Topic 606)."January 1, 2020The adoption of the guidance will not have a material effect on the Company's financial position, results of operations, cash flows and related disclosures.
ASU No. 2017-04, Intangibles - Goodwill and Other (Topic 350): Simplifying the Test for Goodwill Impairment The guidance removes the second step of the two-step test for the measurement of goodwill impairment. The guidance allows for early adoption for impairment testing dates after January 1, 2017. January 1, 2020 The adoption of the guidance will not have a material effect on the Company's financial position, results of operations, cash flows and related disclosures.
ASU 2018-13, Fair Value Measurement (Topic 820): Disclosure Framework - Changes to the Disclosure Requirements for Fair Value MeasurementThe guidance removes, modifies and adds certain disclosures relating to fair value measurements.January 1, 2020The adoption of the guidance will not have a material effect on the Company's financial position, results of operations, cash flows and related disclosures.
ASU 2018-15, Intangibles - Goodwill and Other - Internal-Use Software (Subtopic 350-40): Customer's Accounting for Implementation Costs Incurred in a Cloud Computing Arrangement That Is a Service ContractThe guidance aligns the requirements for capitalizing implementation costs incurred in a hosting agreement that is a service contract with the requirements for capitalizing implementation costs incurred to develop or obtain internal-use software.January 1, 2020The adoption of the guidance will not have a material effect on the Company's financial position, results of operations, cash flows and related disclosures.
ASU 2019-12, Income Taxes (Topic 740), Simplifying the Accounting for Income TaxesThe guidance eliminates certain exceptions to the income tax guidance related to the approach for intraperiod tax allocation, the methodology for calculating income taxes in an interim period and the recognition of deferred tax liabilities for outside basis differences. The new guidance also simplifies aspects of the accounting for franchise taxes and enacted changes in tax laws or rates and clarifies the accounting for transactions that result in a step-up in the tax basis of goodwill.January 1, 2021The Company is currently evaluating the timing of adoptionguidance and the effect on its current impairment testing process.financial position, results of operations, cash flows and related disclosures.
ASU 2020-01, Investments—Equity Securities (Topic 321), Investments—Equity Method and Joint Ventures (Topic 323), and Derivatives and Hedging (Topic 815): Clarifying the Interactions between Topic 321, Topic 323, and Topic 815The guidance clarifies certain interactions between the guidance to account for certain equity securities and investments under the equity method of accounting.January 1, 2021The Company is currently evaluating the guidance and the effect on its financial position, results of operations, cash flows and related disclosures.



NOTE 3—Revenue

Revenue is recognized when obligations under the terms of a contract with the customer are satisfied, which occurs when control of the trucks, parts, or services are transferred to the customer. Revenue is measured as the amount of consideration expected to be received in exchange for transferring goods or providing services. The satisfaction of performance obligations under the terms of a revenue contract generally gives rise for the right to payment from the customer. The Company's standard payment terms vary by the type and location of the customer and the products or services offered. Generally, the time between when revenue is recognized and when payment is due is not significant. Given the insignificant days between revenue recognition and receipt of payment, financing components do not exist between the Company and its customers. Taxes collected from customers are excluded from revenue. The estimated costs of product warranties are recognized as expense when the products are sold. See Note 16 for further information on product warranties.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

The majority of the Company's sales contracts contain performance obligations satisfied at a point in time when title and risks and rewards of ownership have transferred to the customer. Revenues for service contracts are recognized as the services are provided.

The Company also records variable consideration in the form of estimated reductions to revenues for customer programs and incentive offerings, including special pricing agreements, promotions and other volume-based incentives. Lift truck sales revenue is recorded net of estimated discounts. The estimated discount amount is based upon historical experience and trend analysis for each lift truck model. In addition to standard discounts, dealers can also request additional discounts that allow them to offer price concessions to customers. From time to time, the Company offers special incentives to increase market share or dealer stock and offers certain customers volume rebates if a specified cumulative level of purchases is obtained.

For contracts with customers that include multiple performance obligations, judgment is required to determine whether performance obligations specified in these contracts are distinct and should be accounted for as separate revenue transactions for recognition purposes. For such arrangements, revenue is allocated to each performance obligation based on its relative standalone selling price. Standalone selling prices are generally determined based on the prices charged to customers or using expected cost plus margin. Impairment losses recognized on receivables or contract assets were not significant for the year ended December 31, 2019 and 2018.

The Company generally expenses sales commissions when incurred because the amortization period would have been one year or less. These costs are reported on the line “Selling, general and administrative expenses” in the Consolidated Statements of Operations.

The Company pays for shipping and handling activities regardless of when control is transferred and has elected to account for shipping and handling as activities to fulfill the promise to transfer the good, rather than a promised service. These costs are reported on the line “Cost of sales” in the Consolidated Statements of Operations.

The following table disaggregates revenue by category:
 YEAR ENDED
 DECEMBER 31, 2019
 Lift truck business        
 Americas EMEA JAPIC Bolzoni Nuvera Elims Total
Dealer sales$1,051.2
 $619.1
 $214.5
 $
 $
 $
 $1,884.8
Direct customer sales542.1
 15.0
 
 
 
 
 557.1
Aftermarket sales396.4
 95.3
 34.2
 
 
 
 525.9
Other133.6
 21.8
 1.0
 345.4
 10.1
 (187.9) 324.0
Total Revenues$2,123.3
 $751.2
 $249.7
 $345.4
 $10.1
 $(187.9) $3,291.8
              
 YEAR ENDED
 DECEMBER 31, 2018
 Lift truck business        
 Americas EMEA JAPIC Bolzoni Nuvera Elims Total
Dealer sales$1,156.6
 $628.1
 $203.1
 $
 $
 $
 $1,987.8
Direct customer sales346.7
 15.2
 
 
 
 
 361.9
Aftermarket sales370.9
 107.4
 36.8
 
 
 
 515.1
Other113.3
 18.1
 2.2
 349.0
 17.0
 (185.3) 314.3
Total Revenues$1,987.5
 $768.8
 $242.1
 $349.0
 $17.0
 $(185.3) $3,179.1


Dealer sales are recognized when the Company transfers control based on the shipping terms of the contract, which is generally when the truck is shipped from the manufacturing facility to the dealers. The majority of direct customer sales are to National Account customers. In these transactions, the Company transfers control and recognizes revenue when it delivers the product to

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

the customer according to the terms of the contract. Aftermarket sales represent parts sales, extended warranty and maintenance services. For the sale of aftermarket parts, the Company transfers control and recognizes revenue when parts are shipped to the customer. When customers are given the right to return eligible parts and accessories, the Company estimates the expected returns based on an analysis of historical experience. The Company adjusts estimated revenues at the earlier of when the most likely amount of consideration expected to be received changes or when the consideration becomes fixed. The Company recognizes revenue for extended warranty and maintenance agreements based on the standalone selling price over the life of the contract, which reflects the costs to perform under these contracts and corresponds with, and thereby depicts, the transfer of control to the customer. Bolzoni revenue from external customers is primarily the sale of attachments to customers. In these transactions, the Company transfers control and recognizes revenue according to the shipping terms of the contract. In the United States, Bolzoni also has revenue for sales of forklift components to HYG plants. Nuvera's revenues include the sale of battery box replacement ("BBR") units to HYG for sale to a dealer and development funding from third-party development agreements. In all revenue transactions, the Company receives cash equal to the invoice price and amount of consideration received and the revenue recognized may vary with changes in marketing incentives. Intercompany revenues between Bolzoni, Nuvera and the lift truck business have been eliminated.

During the fourth quarter of 2018, Nuvera recognized revenue which had previously been deferred related to BBR units due to the inability to estimate total future warranty costs. The BBRs are new technology and the design of the product continues to evolve. The Company determined sufficient data was available in the fourth quarter of 2018 to reasonably estimate the future costs related to the sale of BBR units, including warranty costs, which were also recorded during the fourth quarter of 2018.

Deferred Revenue: The Company defers revenue for transactions that have not met the criteria for recognition at the time payment is collected, including extended warranties and maintenance contracts. In addition, for certain products, services and customer types, the Company collects payment prior to the transfer of control to the customer.
 Deferred Revenue
Balance, December 31, 2018$61.8
Customer deposits and billings76.8
Revenue recognized(65.2)
Foreign currency effect(0.1)
Balance, December 31, 2019$73.3


NOTE 4—Business Segments

The Company’s reportable segments for the lift truck business include the following three management units: the Americas, EMEA and JAPIC. Americas includes lift truck operations in the United States, Canada, Mexico, Brazil, Latin America and its corporate headquarters. EMEA includes lift truck operations in Europe, the Middle East and Africa. JAPIC includes lift truck operations in the Asia and Pacific regions, including China, as well as the equity earnings of SN operations. In 2018, the Company completed the acquisition of the majority interest in Hyster-Yale Maximal, which is also included in the JAPIC segment from the date of acquisition. Certain amounts are allocated to these geographic management units and are included in the segment results presented below, including product development costs, corporate headquarter's expenses and certain information technology infrastructure costs. These allocations among geographic management units are determined by senior management and not directly incurred by the geographic operations. In addition, other costs are incurred directly by these geographic management units based upon the location of the manufacturing plant or sales units, including manufacturing variances, product liability, warranty and sales discounts, which may not be associated with the geographic management unit of the ultimate end user sales location where revenues and margins are reported. Therefore, the reported results of each segment for the lift truck business cannot be considered stand-alone entities as all segments are inter-related and integrate into a single global lift truck business.

The Company reports the results of both Bolzoni and Nuvera as separate segments. Intercompany sales between Nuvera, Bolzoni and the lift truck business have been eliminated.

In 2019, as part of a separate segment.plan to expand Bolzoni's capabilities in the United States, Bolzoni's North America attachment manufacturing moved into HYG's Sulligent, Alabama manufacturing facility. As a result, effective January 1, 2019, the Sulligent facility became a Bolzoni facility. Accordingly, the results of the Sulligent facility in 2019 have been included in the Bolzoni


On April 1, 2016,NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

segment and the Company acquired a majority interest in Bolzoni, which is also reported as a separate segment. Bolzoni'shistorical results of operations of the Sulligent facility for 2018 and 2017 have been included sincein the acquisition date.Bolzoni segment. As part of the reorganization of the two facilities, restructuring costs of approximately $2.5 million were incurred for the year ended December 31, 2019, respectively. See Note 19 to the consolidated financial statements20 for additional information.information on restructuring costs.


Financial information for each of the reportable segments is presented in the following table. See Note 1 for a discussion of the Company’s product lines. Refer to Note 2 for a description of the accounting policies of the reportable segments as well as a reference table for the remaining accounting policies described in the accompanying footnotes.

2017 2016 20152019 2018 2017
Revenues from external customers          
Americas$1,834.1
 $1,675.7
 $1,775.5
$2,123.3
 $1,987.5
 $1,834.1
EMEA715.8
 615.7
 606.4
751.2
 768.8
 715.8
JAPIC173.9
 169.5
 193.7
249.7
 242.1
 173.9
Lift truck business2,723.8
 2,460.9
 2,575.6
3,124.2
 2,998.4
 2,723.8
Bolzoni177.2
 115.6
 
345.4
 349.0
 312.5
Nuvera3.7
 2.5
 2.5
10.1
 17.0
 3.7
Eliminations(19.5) (9.3) 
(187.9) (185.3) (154.8)
Total$2,885.2
 $2,569.7
 $2,578.1
$3,291.8
 $3,179.1
 $2,885.2
Gross profit (loss)     
Americas$354.8
 $314.3
 $334.6
EMEA110.5
 102.8
 95.7
JAPIC29.7
 22.1
 20.2
Lift truck business495.0
 439.2
 450.5
Bolzoni58.1
 63.7
 54.8
Nuvera(11.2) (6.0) (2.1)
Eliminations(0.1) 0.1
 (0.6)
Total$541.8
 $497.0
 $502.6
Selling, general and administrative expenses     
Americas$266.0
 $238.9
 $225.0
EMEA99.8
 96.2
 88.9
JAPIC43.6
 36.6
 26.3
Lift truck business409.4
 371.7
 340.2
Bolzoni53.4
 54.2
 48.4
Nuvera25.1
 32.3
 39.9
Total$487.9
 $458.2
 $428.5
Operating profit (loss) 
  
  
Americas$88.8
 $75.4
 $109.6
EMEA10.7
 6.6
 6.8
JAPIC(13.9) (14.5) (6.1)
Lift truck business85.6
 67.5
 110.3
Bolzoni4.7
 9.5
 6.4
Nuvera(36.3) (38.3) (42.0)
Eliminations(0.1) 0.1
 (0.6)
Total$53.9
 $38.8
 $74.1
          



NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


 2019 2018 2017
Interest expense 
  
  
Americas$15.4
 $12.4
 $12.3
EMEA2.9
 3.1
 1.6
JAPIC0.9
 (0.1) 
Lift truck business19.2
 15.4
 13.9
Bolzoni0.7
 0.8
 0.8
Nuvera
 0.1
 
  Eliminations(0.1) (0.3) (0.1)
Total$19.8
 $16.0
 $14.6
Interest income 
  
  
Americas$(1.2) $(2.2) $(3.3)
EMEA(0.4) (0.1) 
JAPIC(0.2) (0.3) (0.4)
Lift truck business(1.8) (2.6) (3.7)
Bolzoni
 
 
Nuvera(0.1) 
 
  Eliminations0.1
 0.2
 0.1
Total$(1.8) $(2.4) $(3.6)
Other (income) expense     
Americas$(4.4) $(3.8) $(25.1)
EMEA(3.1) (3.4) (1.1)
JAPIC(3.4) (4.5) (4.5)
Lift truck business(10.9) (11.7) (30.7)
Bolzoni0.2
 0.3
 
Nuvera(1.3) 
 
Total$(12.0) $(11.4) $(30.7)
Income tax provision (benefit) 
  
  
Americas$17.8
 $15.5
 $57.3
EMEA2.3
 0.8
 0.9
JAPIC0.7
 (5.7) 1.2
Lift truck business20.8
 10.6
 59.4
Bolzoni0.2
 2.1
 1.0
Nuvera(9.7) (10.5) (15.3)
  Eliminations
 0.1
 (0.2)
Total$11.3
 $2.3
 $44.9
      

 2017 2016 2015
Gross profit (loss)  
  
Americas$334.6
 $287.9
 $308.1
EMEA95.7
 89.5
 101.3
JAPIC20.2
 17.1
 23.2
Lift truck business450.5
 394.5
 432.6
Bolzoni54.8
 35.7
 
Nuvera(2.1) (2.7) (1.8)
  Eliminations(0.6) 
 
Total$502.6
 $427.5
 $430.8
Selling, general and administrative expenses     
Americas$225.3
 $214.2
 $191.2
EMEA86.7
 81.9
 88.3
JAPIC26.3
 23.8
 25.0
Lift truck business338.3
 319.9
 304.5
Bolzoni48.4
 35.8
 
Nuvera39.9
 36.9
 22.8
Total$426.6
 $392.6
 $327.3
Operating profit (loss) 
  
  
Americas$109.3
 $73.7
 $116.9
EMEA9.0
 7.6
 13.0
JAPIC(6.1) (6.7) (1.8)
Lift truck business112.2
 74.6
 128.1
Bolzoni6.4
 (0.1) 
Nuvera(42.0) (39.6) (24.6)
  Eliminations(0.6) 
 
Total$76.0
 $34.9
 $103.5
Interest expense 
  
  
Americas$12.3
 $5.4
 $4.4
EMEA1.6
 0.4
 0.1
JAPIC
 0.1
 0.2
Lift truck business13.9
 5.9
 4.7
Bolzoni0.8
 0.8
 
Nuvera
 
 
  Eliminations(0.1) 
 
Total$14.6
 $6.7
 $4.7
      


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


 2019 2018 2017
Net income (loss) attributable to stockholders 
  
  
Americas$61.2
 $53.5
 $68.4
EMEA9.0
 6.3
 5.3
JAPIC(11.9) (3.1) (1.9)
Lift truck business58.3
 56.7
 71.8
Bolzoni2.8
 5.8
 3.9
Nuvera(25.2) (27.9) (26.7)
  Eliminations(0.1) 0.1
 (0.4)
Total$35.8
 $34.7
 $48.6
Total assets 
  
  
Americas$1,369.8
 $1,259.4
 $1,146.0
EMEA749.7
 720.7
 615.5
JAPIC337.3
 315.6
 138.6
Eliminations(627.4) (578.7) (304.6)
Lift truck business1,829.4
 1,717.0
 1,595.5
Bolzoni286.0
 231.8
 239.8
Nuvera57.7
 39.6
 26.4
  Eliminations(325.9) (246.3) (213.8)
Total$1,847.2
 $1,742.1
 $1,647.9
Depreciation and amortization 
  
  
Americas$17.5
 $20.9
 $19.9
EMEA6.5
 7.4
 7.1
JAPIC6.6
 5.2
 2.6
Lift truck business30.6
 33.5
 29.6
Bolzoni11.7
 9.7
 11.2
Nuvera1.0
 0.8
 2.0
Total$43.3
 $44.0
 $42.8
Capital expenditures 
  
  
Americas$15.9
 $20.9
 $25.5
EMEA17.2
 7.3
 8.6
JAPIC4.7
 3.6
 1.2
Lift truck business37.8
 31.8
 35.3
Bolzoni5.6
 4.2
 4.7
Nuvera6.3
 2.8
 1.0
Total$49.7
 $38.8
 $41.0
Cash and cash equivalents     
Americas$19.5
 $19.5
 $191.2
EMEA5.4
 31.6
 11.6
JAPIC21.9
 17.2
 6.6
Lift truck business46.8
 68.3
 209.4
Bolzoni17.4
 15.4
 10.7
Nuvera0.4
 
 
Total$64.6
 $83.7
 $220.1

 2017 2016 2015
Interest income 
  
  
Americas$(3.3) $(1.0) $(1.0)
EMEA
 (0.5) (0.3)
JAPIC(0.4) (0.5) (0.2)
Lift truck business(3.7) (2.0) (1.5)
Bolzoni
 
 
Nuvera
 
 
  Eliminations0.1
 
 
Total$(3.6) $(2.0) $(1.5)
Other (income) expense     
Americas$(25.4) $(5.7) $(2.7)
EMEA1.1
 1.0
 1.0
JAPIC(4.5) (3.2) (2.5)
Lift truck business(28.8) (7.9) (4.2)
Bolzoni
 (0.2) 
Nuvera
 
 
Total$(28.8) $(8.1) $(4.2)
Income tax provision (benefit) 
  
  
Americas$57.3
 $15.4
 $39.9
EMEA0.9
 (2.7) 1.6
JAPIC1.2
 (0.5) (2.1)
Lift truck business59.4
 12.2
 39.4
Bolzoni1.0
 (0.4) 
Nuvera(15.3) (15.8) (10.0)
  Eliminations(0.2) 
 
Total$44.9
 $(4.0) $29.4
Net income (loss) attributable to stockholders 
  
  
Americas$68.4
 $59.6
 $76.3
EMEA5.3
 9.4
 10.6
JAPIC(1.9) (2.1) 2.4
Lift truck business71.8
 66.9
 89.3
Bolzoni3.9
 (0.3) 
Nuvera(26.7) (23.8) (14.6)
  Eliminations(0.4) 
 
Total$48.6
 $42.8
 $74.7
      


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

 2017 2016 2015
Total assets 
  
  
Americas$1,146.0
 $831.9
 $680.7
EMEA615.5
 462.3
 412.0
JAPIC138.6
 127.0
 140.6
Eliminations(304.6) (185.3) (130.9)
Lift truck business1,595.5
 1,235.9
 1,102.4
Bolzoni239.8
 206.9
 
Nuvera26.4
 36.9
 17.4
  Eliminations(213.8) (192.6) (23.9)
Total$1,647.9
 $1,287.1
 $1,095.9
Depreciation and amortization 
  
  
Americas$19.9
 $18.5
 $16.2
EMEA7.1
 6.5
 5.9
JAPIC2.6
 3.1
 5.2
Lift truck business29.6
 28.1
 27.3
Bolzoni11.2
 9.5
 
Nuvera2.0
 1.5
 1.6
Total$42.8
 $39.1
 $28.9
Capital expenditures 
  
  
Americas$25.5
 $27.6
 $33.5
EMEA8.6
 7.3
 8.7
JAPIC1.2
 1.6
 1.7
Lift truck business35.3
 36.5
 43.9
Bolzoni4.7
 4.0
 
Nuvera1.0
 2.2
 2.7
Total$41.0
 $42.7
 $46.6
Cash and cash equivalents     
Americas$191.2
 $10.4
 $54.2
EMEA11.6
 14.4
 82.2
JAPIC6.6
 8.2
 18.5
Lift truck business209.4
 33.0
 154.9
Bolzoni10.7
 10.2
 
Nuvera
 
 0.2
Total$220.1
 $43.2
 $155.1


Data by Geographic Region


No single country outside of the United States comprised 10% or more of revenues from unaffiliated customers. The “Other” category below includes Canada, Mexico, South America and the Asia and Pacific regions. In addition, no single customer comprised 10% or more of revenues from unaffiliated customers.

 
United
States
 Europe, Africa and Middle East Other Consolidated
2019       
Revenues from unaffiliated customers, based on the customers’ location$1,794.6
 $923.6
 $573.6
 $3,291.8
Long-lived tangible assets$232.9
 $103.9
 $127.9
 $464.7
2018       
Revenues from unaffiliated customers, based on the customers’ location$1,655.0
 $940.5
 $583.6
 $3,179.1
Long-lived tangible assets$180.9
 $72.6
 $118.3
 $371.8
2017       
Revenues from unaffiliated customers, based on the customers’ location$1,588.8
 $825.8
 $470.6
 $2,885.2
Long-lived tangible assets$181.6
 $82.3
 $83.4
 $347.3


NOTE 5—Quarterly Results of Operations (Unaudited)

A summary of the unaudited results of operations for the year ended December 31 is as follows:
 2019
 
First
Quarter
 
Second
Quarter
 
Third
Quarter
 
Fourth
Quarter
Revenues$834.8
 $856.2
 $766.0
 $834.8
Gross profit$126.2
 $139.4
 $135.0
 $141.2
Operating profit$3.4
 $22.9
 $19.5
 $8.1
Net income$3.2
 $16.9
 $13.1
 $3.4
Net income attributable to stockholders$3.4
 $16.2
 $12.8
 $3.4
        
Basic earnings per share$0.20
 $0.97
 $0.77
 $0.20
Diluted earnings per share$0.20
 $0.97
 $0.76
 $0.20
 2018
 
First
Quarter
 
Second
Quarter
 
Third
Quarter
 
Fourth
Quarter
Revenues$788.5
 $765.9
 $783.9
 $840.8
Gross profit$132.1
 $125.3
 $117.7
 $121.9
Operating profit (loss)$19.2
 $10.8
 $12.2
 $(3.4)
Net income (loss)$14.9
 $5.7
 $14.9
 $(1.2)
Net income (loss) attributable to stockholders$14.9
 $5.6
 $15.4
 $(1.2)
        
Basic earnings (loss) per share$0.90
 $0.34
 $0.93
 $(0.07)
Diluted earnings (loss) per share$0.90
 $0.34
 $0.93
 $(0.07)



NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

 
United
States
 Europe, Africa and Middle East Other Consolidated
2017       
Revenues from unaffiliated customers, based on the customers’ location$1,588.8
 $825.8
 $470.6
 $2,885.2
Long-lived tangible assets$181.6
 $82.3
 $83.4
 $347.3
2016       
Revenues from unaffiliated customers, based on the customers’ location$1,437.6
 $701.9
 $430.2
 $2,569.7
Long-lived tangible assets$159.1
 $59.8
 $82.1
 $301.0
2015       
Revenues from unaffiliated customers, based on the customers’ location$1,575.2
 $606.5
 $396.4
 $2,578.1
Long-lived tangible assets$126.2
 $39.4
 $61.8
 $227.4


NOTE 4—Quarterly Results of Operations (Unaudited)

A summary of the unaudited results of operations for the year ended December 31 is as follows:
 2017
 
First
Quarter
 
Second
Quarter
 
Third
Quarter
 
Fourth
Quarter
Revenues$713.1
 $685.5
 $691.1
 $795.5
Gross profit$126.1
 $121.7
 $121.4
 $133.4
Operating profit$23.4
 $18.3
 $17.9
 $16.4
Net income (loss)$18.1
 $16.4
 $16.7
 $(2.3)
Net income (loss) attributable to stockholders$18.1
 $16.4
 $16.5
 $(2.4)
        
Basic earnings (loss) per share$1.10
 $1.00
 $1.00
 $(0.15)
Diluted earnings (loss) per share$1.10
 $0.99
 $1.00
 $(0.15)

Net income (loss) attributable to stockholders for the fourth quarter of 2017 include the impacts of the Tax Cuts and Jobs Act, which was signed into law December 22, 2017. See Note 6 to the consolidated financial statements for further discussion.
 2016
 
First
Quarter
 
Second
Quarter
 
Third
Quarter
 
Fourth
Quarter
Revenues$604.2
 $645.6
 $629.3
 $690.6
Gross profit$97.9
 $114.0
 $104.6
 $111.0
Operating profit$9.7
 $11.4
 $5.4
 $8.4
Net income$9.9
 $8.3
 $12.0
 $12.1
Net income attributable to stockholders$10.0
 $8.3
 $12.3
 $12.2
        
Basic earnings per share$0.61
 $0.51
 $0.75
 $0.74
Diluted earnings per share$0.61
 $0.51
 $0.75
 $0.74


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

NOTE 5—6—Common Stock and Earnings per Share
The Company's Class A common stock is traded on the New York Stock Exchange under the ticker symbol “HY.” Because of transfer restrictions on Class B common stock, no trading market has developed, or is expected to develop, for the Company's Class B common stock. The Class B common stock is convertible into Class A common stock on a one-for-one basis at any time at the request of the holder. The Company's Class A common stock and Class B common stock have the same cash dividend rights per share. The Class A common stock has one vote per share and the Class B common stock has ten votes per share. The total number of authorized shares of Class A common stock and Class B common stock at December 31, 20172019 was 125 million shares and 35 million shares, respectively. Treasury shares of Class A common stock totaling 425,787221,190 and 497,353327,385 at December 31, 20172019 and 2016,2018, respectively, have been deducted from shares outstanding.
Stock Compensation: The Company has stock compensation plans for certain employees in the U.S. that allow the grant of shares of Class A common stock, subject to restrictions, as a means of retaining and rewarding them for long-term performance and to increase ownership in the Company. Shares awarded under the plans are fully vested and entitle the stockholder to all rights of common stock ownership except that shares may not be assigned, pledged or otherwise transferred during the restriction period. In general, the restriction period ends at the earliest of (i) five years after the participant's retirement date, (ii) four, seven or ten years from the award date, as defined in the award, or (iii) the participant's death or permanent disability. Pursuant to the plans, the Company issued89,502, 56,002111,148, 88,172 and 49,18589,502 shares related to the years ended December 31, 2017, 20162019, 2018 and 2015,2017, respectively. After the issuance of these shares, there were 407,890208,570 shares of Class A common stock available for issuance under these plans. Compensation expense related to these share awards was $7.6$7.0 million ($6.05.5 million net of tax), $3.8$4.5 million ($2.33.6 million net of tax) and $1.9$7.6 million ($1.26.0 million net of tax) for the years ended December 31, 2017, 20162019, 2018 and 2015,2017, respectively. Compensation expense at the grant date represents fair value based on the market price of the shares of Class A common stock. The Company also has a stock compensation plan for non-employee directors of the Company under which a portion of the non-employee directors’ annual retainer is paid in restricted shares of Class A common stock. For the yearyears ended December 31, 2017, $110,0002019, $118,000 of each non-employee director's retainer of $166,000$178,000 was paid in restricted shares of Class A common stock. For the year ended December 31, 2016, $102,0002018, $113,000 of $158,000$173,000 was paid in restricted shares of Class A common stock. For the year ended December 31, 2015, $94,0002017, $110,000 of $150,000$166,000 was paid in restricted shares of Class A common stock. Shares awarded under the plan are fully vested and entitle the stockholder to all rights of common stock ownership except that shares may not be assigned, pledged or otherwise transferred during the restriction period. In general, the restriction period ends at the earliest of (i) ten years from the award date, (ii) the date of the director's death or permanent disability, (iii) five years (or earlier with the approval of the Board of Directors) after the director's date of retirement from the Board of Directors, or (iv) the date on which the director has both retired from the Board of Directors and reached 70 years of age. Pursuant to this plan, the Company issued 14,480, 15,42618,954, 16,196 and 13,68314,480 shares related to the years ended December 31, 2017, 20162019, 2018 and 2015,2017, respectively. In addition to the mandatory retainer fee received in restricted stock, directors may elect to receive shares of Class A common stock in lieu of cash for up to 100% of the balance of their annual retainer, meeting attendance fees, committee retainer and any committee chairman's fees. These voluntary shares are not subject to any restrictions. Total shares issued under voluntary elections were 1,711, 2,182 and 2,006 2,352in 2019, 2018 and 2,150 in 2017, 2016 and 2015, respectively. After the issuance of these shares, there were 27,11784,253 shares of Class A common stock available for issuance under this directors' plan. Compensation expense related to these awards was $1.2 million ($0.9 million net of tax), $1.1$1.2 million ($0.70.9 million net of tax) and $1.0$1.2 million ($0.60.9 million net of tax) for the years ended December 31, 20172019, 20162018 and 2015,2017, respectively. Compensation expense at the grant date represents fair value based on the market price of the shares of Class A common stock.
Earnings per Share: For purposes of calculating earnings per share, no adjustments have been made to the reported amounts of net income attributable to stockholders. In addition, basic and diluted earnings per share for Class A common stock are the same as Class B common stock. The weighted average number of shares of Class A common stock and Class B common stock outstanding used to calculate basic and diluted earnings per share were as follows:
 2019 2018 2017
Basic weighted average shares outstanding16.645
 16.540
 16.447
Dilutive effect of restricted stock awards0.081
 0.062
 0.067
Diluted weighted average shares outstanding16.726
 16.602
 16.514
Basic earnings per share$2.15
 $2.10
 $2.95
Diluted earnings per share$2.14
 $2.09
 $2.94
Cash dividends per share$1.2625
 $1.2325
 $1.2025

 2017 2016 2015
Basic weighted average shares outstanding16.447
 16.376
 16.307
Dilutive effect of restricted stock awards0.067
 0.051
 0.048
Diluted weighted average shares outstanding16.514
 16.427
 16.355
Basic earnings per share$2.95
 $2.61
 $4.58
Diluted earnings per share$2.94
 $2.61
 $4.57
Cash dividends per share$1.2025
 $1.1700
 $1.1300




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


NOTE 6—7—Income Taxes
The components of income before income taxes and provision for income taxes for the years ended December 31 are as follows:
 2019 2018 2017
Income (loss) before income taxes     
U.S.$(18.2) $(7.5) $48.3
Non-U.S.66.1
 44.1
 45.5
 $47.9
 $36.6
 $93.8
Income tax provision     
Current tax provision (benefit):     
Federal$3.2
 $(4.2) $28.3
State1.9
 0.8
 1.4
Non-U.S.13.0
 8.9
 7.1
Total current$18.1
 $5.5
 $36.8
Deferred tax provision (benefit):     
Federal$(7.6) $(2.6) $10.7
State(1.9) 0.3
 (0.7)
Non-U.S.2.7
 (0.9) (1.9)
Total deferred$(6.8) $(3.2) $8.1
 $11.3
 $2.3
 $44.9

 2017 2016 2015
Income before income taxes     
U.S.$48.3
 $(1.2) $71.2
Non-U.S.45.5
 39.5
 33.3
 $93.8
 $38.3
 $104.5
Income tax provision (benefit)     
Current tax provision:     
Federal$28.3
 $(1.3) $22.1
State1.4
 (0.3) 3.4
Non-U.S.7.1
 5.0
 5.3
Total current$36.8
 $3.4
 $30.8
Deferred tax provision (benefit):     
Federal$10.7
 $(5.8) $(0.4)
State(0.7) 0.8
 1.2
Non-U.S.(1.9) (2.4) (2.2)
Total deferred$8.1
 $(7.4) $(1.4)
 $44.9
 $(4.0) $29.4
The Company made income tax payments of $14.0$12.5 million, $19.3$16.8 million and $32.714.0 million during 20172019, 20162018 and 20152017, respectively. The Company received income tax refunds of $2.2$3.7 million, $11.1$0.8 million and $0.22.2 million during 20172019, 20162018 and 20152017, respectively.
A reconciliation of the federal statutory and reported income tax rate for the year ended December 31 is as follows:
 2019 2018 2017
Income before income taxes$47.9
 $36.6
 $93.8
Statutory taxes at 21% (35% in 2017)$10.1
 $7.7
 $32.8
Tax Reform Act0.1
 (4.4) 38.2
Federal income tax credits(4.0) (3.7) (1.8)
Equity interest earnings(1.5) (1.7) (8.1)
Non-U.S. rate differences0.9
 (1.5) (7.2)
Tax controversy resolution(1.4) (0.4) 
State income taxes(0.2) 
 0.2
Valuation allowance0.8
 3.0
 0.1
Global intangible low-taxed income2.0
 1.2
 
Sale of non-U.S. investment
 
 (9.1)
Unremitted non-U.S. earnings1.7
 
 (0.4)
Nondeductible compensation1.7
 0.9
 0.1
Capitalized acquisition costs
 0.9
 
Base-erosion and anti-abuse tax1.4
 
 
Other(0.3) 0.3
 0.1
Income tax provision$11.3
 $2.3
 $44.9
Reported income tax rate23.6% 6.3% 47.9%
 2017 2016 2015
Income before income taxes$93.8
 $38.3
 $104.5
Statutory taxes at 35.0%$32.8
 $13.4
 $36.6
Tax Reform Act38.2
 
 
State income taxes0.2
 (0.6) 4.1
Valuation allowance0.1
 (0.2) 5.9
Sale of non-U.S. investment(9.1) (1.9) (3.7)
Equity interest earnings(8.1) (2.2) (1.9)
Non-U.S. rate differences(7.2) (9.6) (10.5)
R&D and other federal credits(1.8) (1.8) (1.7)
Unremitted non-U.S. earnings(0.4) (3.9) 0.1
Tax controversy resolution
 2.1
 (0.2)
Other0.2
 0.7
 0.7
Income tax provision (benefit)$44.9
 $(4.0) $29.4
Reported income tax rate47.9% n.m.
 28.1%
n.m. - not meaningful

On December 22, 2017, the President of the United States signed into law the Tax Cuts and Jobs Act (the “Tax Reform Act”).Act. The Tax Reform Act significantly revised the U.S. corporate income tax regime by, among other things, lowering the U.S. corporate income tax rate

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

from 35% to 21% effective January 1, 2018, repealing the deduction for domestic production activities, allowing the immediate expensing of certain qualified capital expenditures, implementing a territorial tax system and imposing a one-time transition tax on certain unremitted earnings of non-U.S. subsidiaries. As a result of the Tax Reform Act

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

2017, the Company recorded the provisional tax effects of $38.2 million, comprised of $33.1 million of tax expense due to the transition tax on the unremitted earnings and profits of non-U.S. subsidiaries and $5.1 million of tax expense due to the effects on the Company’s deferred tax assets and liabilities. The final amounts recorded in subsequent financial statements may materially differ from these provisional amounts due to among other things, additional analysis, changes in interpretationsliabilities as of the Tax Reform Act including interpretations by state and local taxing authorities and related assumptions of the Company, and additional regulatory guidance that may be issued which could potentially effect the measurement of these provisional tax amounts. The provisional amounts are expected to be finalized when the U.S. corporate income tax return for 2017 is filed in 2018, but in no event later than one year from the enactment date.

The one-time transition tax is based on the post-1986 unremitted earnings and profits of non-U.S. subsidiaries which have been previously deferred from U.S. income taxes including such earnings through the measurement date as determined by the Tax Reform Act. The amount of transition tax also depends on the amount of earnings and profits held in cash or other specified assets.December 31, 2017. The Company had an estimated $310 million of undistributed non-U.S. earnings and profits subject to the transition tax and recognized a provisional $33.1 million of income tax expense in the fourth quarter of 2017. After the utilization of existing tax credits, the Company expects to pay cash taxes, including state income taxes, of an estimated $22.5 million with respect to the transition tax payable over eight years. These amounts may change upon the issuance of additional regulatory guidance or when the Company finalizeshas since finalized its calculation of earnings and profits, including the amounts held in cash or other specified assets and its calculation of available foreign tax credits. Thecredits consistent with the additional regulatory guidance issued during 2018 and 2019, resulting in a reduction in tax expense of $4.4 million and an increase in tax expense of $0.1 million in 2018 and 2019, respectively.

After the utilization of existing tax credits, the Company intends that future distributions will be from earnings which would otherwise qualify for the one hundred percent dividends received deduction provided in the Tax Reform Act and earnings which would not result in any significant foreign taxes. As a result, no additionalpay cash taxes, including state income taxes, have been provided for any undistributed foreign earnings not subjectof $17.7 million with respect to the transition tax nor any additional outside basis differences inherentpayable over an installment period of eight years, beginning in these entities, as these amounts continue to be indefinitely reinvested in non-U.S. operations. It is not practicable to estimate2018. During 2019, the additional income taxes and applicableCompany has provided for the anticipated withholding taxes on unremitted non-U.S. earnings for which no reinvestment plan has been identified and that wouldmay be payable onrepatriated in the remittanceforeseeable future. As such, the Company has provided a deferred tax liability with respect to these earnings of such undistributed foreign earnings.$1.7 million at December 31, 2019.


While the Tax Reform Act provides for a territorial system, beginning in 2018, it includes new anti-deferral and anti-base erosion provisions, the global intangible low-taxed income (“GILTI”) provisions and the base-erosion and anti-abuse tax (“BEAT”) provisions.


The GILTI provisions require the Company to include in its U.S. income tax return non-U.S. earnings in excess of an allowable return on the Company’s non-U.S. subsidiary’s tangible assets. The Company expects that it will be subject to incrementalassets in its U.S. income tax on GILTI beginning in 2018 due to expense allocations required by the U.S foreign tax credit rules and various adjustments required to determine tangible assets provided in the Tax Reform Act.return. The Company has elected to account for GILTI tax in the period in which it is incurred, and therefore has not provided any deferred tax impacts of GILTI as of December 31, 2017.amounts for GILTI.


The BEAT provisions in the Tax Reform Act create a minimum tax where a lower tax rate is applied to pre-tax income determined without the benefit of certain base-erosion payments made to related non-U.S. corporations. The base-erosion payments primarily consist of reimbursements for research and development performed by the Company's non-U.S. engineering centers. The Company will only be taxed under this regime if such minimum tax exceeds the regular U.S. corporate income tax. The Company continues to evaluate whether it will be subject torecorded a BEAT provisions.expense of $1.4 million in 2019.


During 2017, the Company recognized a tax benefit of $9.1 million and tax expense of $1.4 million for unrecognized tax benefits, from an internal sale of a subsidiary between consolidated companies resulting in the repatriation of non-U.S. accumulated earnings taxed at higher rates. In addition, the Company settled various federal obligations in Brazil through the utilization of its federal net operating loss carryforwards for which a valuation allowance was previously provided. As a result of the utilization of the underlying deferred tax assets, the Company released the associated valuation allowance previously provided of $4.7 million. This was partly offset by a $1.6 million valuation allowance provided against deferred tax assets in China where the Company has determined that such deferred tax assets no longer meet the more likely than not standard for realization.

During 2016, the Company received a notice from the Italian Tax Authority approving the transfer of certain tax losses as part of an internal restructuring. As a result, the Company believes it is more likely than not that deferred tax assets for such losses of approximately $3.2 million will be realized in the foreseeable future, and has released the valuation allowance previously provided.


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

Other items during 2016 include a tax benefit of $4.0 million. As a result of the Bolzoni acquisition, the Company changed its previous reinvestment assertion; and consequently, all of the earnings of its European operations are now considered permanently reinvested and the previously provided deferred tax liability is no longer required. In addition, the Company recognized tax expense of $1.6 million related to non-deductible acquisition expenses and tax expense of $2.1 million for net additions for unrecognized tax benefits.


The Company continually evaluates its deferred tax assets to determine if a valuation allowance is required. A valuation allowance is required where realization is determined to no longer meet the "more likely than not" standard. During 2014 and 2015, a significant downturn was experienced in the Company's Brazilian operations. This significant decrease in operations and actions taken by management to reduce its manufacturing activity to more appropriate levels, coupled with the continued low expectations in the near term for the Brazilian lift truck market and the continuing devaluation of the Brazilian real, caused the Company in 2015 to forecast a three-year cumulative loss for its Brazilian operations. Although the Company projects earnings over the longer term for its Brazilian operations, such longer-term forecasts are not sufficient positive evidence to support the future utilization of deferred tax assets when a three-year loss is determined. Accordingly, in 2015, the Company recorded a valuation allowance adjustment of $1.9 million against its deferred tax assets in Brazil. The Company also recognized $2.7 million, $2.4 million and $5.6 million in 2017, 2016 and 2015, respectively, of valuation allowances related to pre-tax losses in Brazil and $0.6 million in 2017 due to pre-tax losses in China in its effective tax rate.
A detailed summary of the total deferred tax assets and liabilities in the Consolidated Balance Sheets resulting from differences in the book and tax basis of assets and liabilities follows:
 December 31
 2017 2016
Deferred tax assets   
Tax attribute carryforwards$28.3
 $31.6
Product warranties9.1
 13.7
Accrued expenses and reserves8.3
 23.2
Accrued product liability6.5
 9.3
Other employee benefits3.2
 5.2
Accrued pension benefits2.2
 8.2
Other
 2.2
Total deferred tax assets57.6
 93.4
Less: Valuation allowance31.0
 29.3
 26.6
 64.1
Deferred tax liabilities   
Depreciation and amortization22.2
 25.4
Inventories0.5
 5.8
Unremitted earnings
 0.4
Other0.3
 
Total deferred tax liabilities23.0
 31.6
Net deferred tax asset$3.6
 $32.5



NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


 December 31
 2019 2018
Deferred tax assets   
Tax attribute carryforwards$25.3
 $28.6
Accrued expenses and reserves16.4
 15.1
Product warranties11.2
 9.9
Accrued product liability8.9
 5.6
Other employee benefits7.1
 4.3
Accrued pension benefits2.4
 4.6
Inventories1.7
 
Other3.1
 2.3
Total deferred tax assets76.1
 70.4
Less: Valuation allowance31.4
 30.9
 44.7
 39.5
Deferred tax liabilities   
Depreciation and amortization27.6
 28.0
Unremitted earnings1.7
 
Inventories
 3.0
Total deferred tax liabilities29.3
 31.0
Net deferred tax asset$15.4
 $8.5

The following table summarizes the tax carryforwards and associated carryforward periods and related valuation allowances where the Company has determined that realization is uncertain:
December 31, 2017December 31, 2019
Net deferred tax
asset
 
Valuation
allowance
 
Carryforwards
expire during:
Net deferred tax
asset
 
Valuation
allowance
 
Carryforwards
expire during:
Non-U.S. net operating loss$21.9
 $13.9
 2018 - Indefinite$17.0
 $13.1
 2020 - Indefinite
Non-U.S. capital losses6.5
 6.5
 2018 - Indefinite6.7
 6.7
 2020 - Indefinite
State net operating losses and credits3.8
 2.4
 2018 - 20364.1
 3.1
 2020 - 2038
Less: Unrecognized tax benefits(3.9) 
 (2.5) 
 
Total$28.3
 $22.8
 $25.3
 $22.9
 
December 31, 2016December 31, 2018
Net deferred tax
asset
 
Valuation
allowance
 
Carryforwards
expire during:
Net deferred tax
asset
 
Valuation
allowance
 
Carryforwards
expire during:
Non-U.S. net operating loss$25.2
 $15.7
 2017 - Indefinite$21.2
 $15.6
 2019 - Indefinite
Non-U.S. capital losses5.9
 5.9
 2017 - Indefinite6.4
 6.4
 2019 - Indefinite
State net operating losses and credits2.8
 2.0
 2017 - 20314.1
 3.3
 2019 - 2037
U.S. foreign tax credit2.5
 
 2017 - 2026
U.S. net operating loss0.8
 
 2017 - 2036
Less: Unrecognized tax benefits(5.6) 
 (3.1) 
 
Total$31.6
 $23.6
 $28.6
 $25.3
 



The establishment of a valuation allowance does not have an impact on cash, nor does such an allowance preclude the Company from using its loss carryforwards or other deferred tax assets in future periods. The tax net operating losses attributable to Brazil and Australia comprise a substantial portion of the non-U.S. net operating loss deferred tax assets and do not expire under local law.
During 20172019 and 2016,2018, the net valuation allowance provided against certain deferred tax assets increased by $1.7$0.5 million and $0.7decreased by $0.1 million, respectively. The change in the total valuation allowance in 20172019 and 20162018 included a net increase in tax expense of $0.1$0.8 million and a net decrease of $0.2$3.0 million, respectively, a net change in the overall U.S. dollar value of valuation allowances

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

previously recorded in non-U.S. currencies and amounts recorded directly in equity of a net increasedecrease of $1.1$0.3 million and $0.9$3.1 million in 20172019 and 2016,2018, respectively. Additionally in 2017, the change in valuation allowance included a net increase of $0.5 million due to the remeasurement of deferred taxes as a result of the Tax Reform Act.
Based upon a review of historical earnings and trends, forecasted earnings and the relevant expiration of carryforwards, the Company believes the valuation allowances provided are appropriate. At December 31, 2017,2019, the Company had gross net operating loss carryforwards in U.S. state jurisdictions of $19.6$11.6 million and non-U.S. jurisdictions of $75.7$58.0 million.
The following is a reconciliation of total gross unrecognized tax benefits, defined as the aggregate tax effect of differences between the Company's tax return positions and the benefits recognized in the consolidated financial statements for the years ended December 31, 20172019, 20162018 and 20152017. Approximately $10.9$13.5 million, $11.115.1 million and $3.810.9 million of these amounts as of December 31, 20172019, 20162018 and 20152017, respectively, relate to permanent items that, if recognized, would impact the reported income tax rate. This amount differs from gross unrecognized tax benefits presented in the table below for December 31, 2016 due to the increase in U.S. federal income taxes which would occur upon the recognition of the state tax benefits included herein.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

 2019 2018 2017
Balance at January 1$15.2
 $10.9
 $11.2
Additions (reductions) for business acquisitions
 6.0
 (1.0)
Additions based on tax positions related to the current year0.3
 0.4
 2.7
Additions (reductions) for tax positions of prior years0.2
 0.3
 (1.5)
Reductions due to settlements with taxing authorities and the lapse of the applicable statute of limitations(2.0) (1.6) (1.2)
Other changes in unrecognized tax benefits including foreign currency translation adjustments(0.1) (0.8) 0.7
Balance at December 31$13.6
 $15.2
 $10.9

 2017 2016 2015
Balance at January 1$11.2
 $3.8
 $4.3
Additions (reductions) for business acquisitions(1.0) 6.3
 
Additions based on tax positions related to the current year2.7
 2.8
 0.7
Additions (reductions) for tax positions of prior years(1.5) 0.1
 0.1
Reductions due to settlements with taxing authorities and the lapse of the applicable statute of limitations(1.2) (0.9) (1.1)
Other changes in unrecognized tax benefits including foreign currency translation adjustments0.7
 (0.9) (0.2)
Balance at December 31$10.9
 $11.2
 $3.8
The Company records interest and penalties on uncertain tax positions as a component of the income tax provision. The Company recorded a net increase of $0.1 million and $0.5 million during 2019 and 2018, and a net decrease of $0.1 million during 2017 and a net increase of $0.1 million during 2016 and 2015 in interest and penalties. In addition, during 2016,2018, the balance of accrued interest and penalty was increased for uncertain tax positions related to business acquisitions by $7.7 million. During 2018, the total amount of interest and penalty was decreased by $0.5 million.million as a result of foreign currency translation into U.S. dollars. The total amount of interest and penalties accrued was $0.8$8.6 million, $0.9$8.5 million and $0.3$0.8 million as of December 31, 2019, 2018 and 2017, 2016 and 2015, respectively.
The Company expects the amount of unrecognized tax benefits will change within the next twelve months; however, the change in unrecognized tax benefits which is reasonably possible within the next twelve months, is not expected to have a significant effect on the Company's financial position or results of operations.months. It is reasonably possible the Company will record unrecognized tax benefits within the next twelve months in the range of zeroup to $0.5$7.0 million resulting from the possible expiration of certain statutes of limitation and settlement of audits. If recognized, the previously unrecognized tax benefits will be recorded as discrete tax benefits in the interim period in which the items are effectively settled. Approximately $4.3 million of the amount that may be recognized in the next twelve months relates to prior business acquisitions, and such amounts will be offset with the pretax reduction of the related indemnity receivable.
The tax returns of the Company and its non-U.S. subsidiaries are routinely examined by various taxing authorities. The Company has not been informed of any material assessment for which an accrual has not been previously provided and the Company would vigorously contest any material assessment. Management believes any potential adjustment would not materially affect the Company's financial condition or results of operations.
In general, the Company operates in taxing jurisdictions that provide a statute of limitations period ranging from three to five years for the taxing authorities to review the applicable tax filings. The examination of U.S. federal tax returns for all years prior to 20142016 have been settled with the Internal Revenue Service or otherwise have essentially closed under the applicable statute of limitations. However, the Company has elected to voluntarily extend the statute of limitations for the U.S. federal tax return for 2012 at the request of its prior parent company such that attributes may be adjusted in limited circumstances. The Company is routinely under examination in various state and non-U.S. jurisdictions and in most cases the statute of limitations has not been extended. The Company believes these examinations are routine in nature and are not expected to result in any material tax assessments.




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


NOTE 7—8—Reclassifications from OCI


The following table summarizes reclassifications out of accumulated other comprehensive income (loss) ("OCI") for each year ended December 31 as recorded in the Consolidated Statements of Operations:
Details about OCI Components Amount Reclassified from OCI Affected Line Item in the Statement Where Net Income Is Presented
  2019 2018 2017  
Gain (loss) on cash flow hedges:        
Interest rate contracts $(0.3) $
 $
 Interest expense
Foreign exchange contracts (16.2) 2.6
 (5.7) Cost of sales
Total before tax (16.5) 2.6
 (5.7) Income before income taxes
Tax expense (benefit) 4.5
 (0.8) 1.6
 Income tax provision
Net of tax $(12.0) $1.8
 $(4.1) Net income
Amortization of defined benefit pension items:        
Actuarial loss $(3.9) $(3.8) $(4.5) Other, net
Prior service (cost) credit (0.1) 0.2
 0.3
 Other, net
Total before tax (4.0) (3.6) (4.2) Income before income taxes
Tax expense 0.8
 0.7
 1.0
 Income tax provision
Net of tax $(3.2) $(2.9) $(3.2) Net income
Total reclassifications for the period $(15.2) $(1.1) $(7.3)  

Details about OCI Components Amount Reclassified from OCI Affected Line Item in the Statement Where Net Income Is Presented
  2017 2016 2015  
Gain (loss) on cash flow hedges:        
Foreign exchange contracts $(5.7) $(3.0) $(8.7) Cost of sales
Total before tax (5.7) (3.0) (8.7) Income before income taxes
Tax expense 1.6
 2.2
 6.0
 Income tax provision (benefit)
Net of tax $(4.1) $(0.8) $(2.7) Net income
Amortization of defined benefit pension items:        
Actuarial loss $(4.5) $(3.0) $(3.5) (a)
Prior service (cost) credit 0.3
 0.3
 0.3
 (a)
Total before tax (4.2) (2.7) (3.2) Income before income taxes
Tax expense 1.0
 0.7
 0.9
 Income tax provision (benefit)
Net of tax $(3.2) $(2.0) $(2.3) Net income
Total reclassifications for the period $(7.3) $(2.8) $(5.0)  
(a) These OCI components are included in the computation of net pension cost (see Note 9 for additional details).


NOTE 8—9—Financial Instruments and Derivative Financial Instruments
The carrying amounts of cash and cash equivalents, accounts receivable and accounts payable approximate fair value due to the short-term maturities of these instruments. The fair values of revolving credit agreements and long-term debt, excluding capitalfinance leases, were determined using current rates offered for similar obligations taking into account company credit risk. This valuation methodology is Level 2 as defined in the fair value hierarchy. At December 31, 2017,2019, the total carrying value and total fair value of revolving credit agreements and long-term debt, excluding capitalfinance leases, was $270.9$266.0 million and $272.2$265.1 million, respectively. At December 31, 20162018, the total carrying value and total fair value of revolving credit agreements and long-term debt, excluding capitalfinance leases, was $184.5 million.$284.2 million and $281.0 million, respectively.
Financial instruments that potentially subject the Company to concentration of credit risk consist principally of accounts receivable and derivatives. The large number of customers comprising the Company’s customer base and their dispersion across many different industries and geographies mitigates concentration of credit risk on accounts receivable. To further reduce credit risk associated with accounts receivable, the Company performs periodic credit evaluations of its customers, but does not generally require advance payments or collateral. The Company enters into derivative contracts with high-quality financial institutions and limits the amount of credit exposure to any one institution.
Derivative Financial Instruments
Financial instruments held by the Company include cash and cash equivalents, accounts receivable, accounts payable, revolving credit agreements, long-term debt, interest rate swap agreements and forward foreign currency exchange contracts. The Company does not hold or issue financial instruments or derivative financial instruments for trading purposes.
The Company uses forward foreign currency exchange contracts to partially reduce risks related to transactions denominated in foreign currencies. These contracts hedge firm commitments and forecasted transactions relating to cash flows associated with sales and purchases denominated in non-functional currencies. The Company offsets fair value amounts related to foreign currency exchange contracts executed with the same counterparty. Changes in the fair value of forward foreign currency exchange contracts that are effective as hedges are recorded in OCI. Deferred gains or losses are reclassified from OCI to the Consolidated Statements of Operations in the same period as the gains or losses from the underlying transactions are recorded and are generally recognized in cost of sales. The ineffective portion of derivatives that are classified as hedges is immediately recognized in earnings and is also generally recognized in cost of sales.


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

Certain of the Company's forward foreign currency contracts were designated as net investment hedges of the Company's net investment in its foreign subsidiaries. For derivative instruments that were designated and qualified as a hedge of a net investment in foreign currency, the gain or loss was reported in other comprehensive income as part of the cumulative translation adjustment to the extent it is effective. The Company utilizes the forward-rate method of assessing hedge effectiveness. Any ineffective portion of net investment hedges would be recognized in the Consolidated Statements of Operations in the same period as the change.
The Company periodically enters into foreign currency exchange contracts that do not meet the criteria for hedge accounting. These derivatives are used to reduce the Company’s exposure to foreign currency risk related to forecasted purchase or sales transactions or forecasted intercompany cash payments or settlements. Gains and losses on these derivatives are generally recognized in cost of sales.


During 2017, theThe Company entered intohas cross-currency swaps which hedge the variability of expected future cash flows that are attributable to foreign currency risk of certain intercompany loans. These agreements include initial and final exchanges of principal and associated interest payments from fixed euro denominated to fixed U.S.-denominated amounts. Changes in the fair value of cross-currency swaps that are effective as hedges are recorded in OCI. Deferred gains or losses are reclassified from OCI to the Consolidated Statements of Operations in the same period as the gains or losses from the underlying transactions are recorded and are generally recognized in other (income) expense and interest expense. The ineffective portion of derivatives that are classified as hedges is immediately recognized in earnings and is generally recognized in other (income) expense.
The Company uses interest rate swap agreements to partially reduce risks related to floating rate financing agreements that are subject to changes in the market rate of interest. Terms of the interest rate swap agreements require the Company to receive a variable interest rate and pay a fixed interest rate. The Company's interest rate swap agreements and its variable rate financings are predominately based upon the one or three-month LIBOR. Changes in the fair value of interest rate swap agreements that are effective as hedges are recorded in OCI. Deferred gains or losses are reclassified from OCI to the Consolidated Statements of Operations in the same period as the gains or losses from the underlying transactions are recorded and are generally recognized in interest expense. The ineffective portion of derivatives that are classified as hedges is immediately recognized in earnings in other (income) expense.
Cash flows from hedging activities are reported in the Consolidated Statements of Cash Flows in the same classification as the hedged item, generally as a component of cash flows from operations.
The Company measures its derivatives at fair value on a recurring basis using significant observable inputs. This valuation methodology is Level 2 as defined in the fair value hierarchy. The Company uses a present value technique that incorporates yield curves and foreign currency spot rates to value its derivatives and also incorporates the effect of the Company's and its counterparties' credit risk into the valuation.


The Company does not currently hold any nonderivative instruments designated as hedges or any derivatives designated as fair value hedges.
Foreign Currency Derivatives:  The Company held forward foreign currency exchange contracts with a total notional amount of $860.2$960.9 million at December 31, 20172019, primarily denominated in euros, U.S. dollars, Japanese yen, British pounds, Mexican pesos, Australian dollars, Swedish kroner, Brazilian real and Chinese renminbi. The Company held forward foreign currency exchange contracts with total notional amounts of $1.1 billion at December 31, 2018, primarily denominated in euros, U.S. dollars, Japanese yen, British pounds, Swedish kroner, Mexican pesos, Chinese Renminbi, Brazilian Real and Australian dollars. The Company held forward foreign currency exchange contracts with total notional amounts of $592.9 million at December 31, 2016, primarily denominated in euros, U.S. dollars, Japanese yen, Swedish kroner, British pounds and Mexican pesos. The fair value of these contracts approximated a net liability of $2.1$19.8 million and $22.7$19.5 million at December 31, 20172019 and 20162018, respectively.
For the years ended December 31, 20172019 and 20162018, there was no material ineffectiveness of forward foreign currency exchange contracts that qualify for hedge accounting. Forward foreign currency exchange contracts that qualify for hedge accounting are generally used to hedge transactions expected to occur within the next 36 months. The mark-to-market effect of forward foreign currency exchange contracts that are considered effective as hedges has been included in OCI. Based on market valuations at December 31, 2017, $1.02019, $11.4 million of the amount of net deferred loss included in OCI at December 31, 20172019 is expected to be reclassified as a gainexpense into the Consolidated Statements of Operations over the next twelve months, as the transactions occur.



NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

Interest Rate Derivatives: The Company holds certain contracts that hedge interest payments on the Term Loan borrowings and one and three-month-month LIBOR borrowings. The following table summarizes the notional amounts, related rates, excluding spreads, and remaining terms of interest rate swap agreements at December 31, 20172019 and 2016:

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

2018:
Notional Amount Average Fixed Rate  
December 31 December 31 December 31 December 31  
2019 2018 2019 2018 Term at December 31, 2019
$56.5
 $56.5
 1.94% 1.94% Extending to November 2022
74.6
 83.5
 2.20% 2.20% Extending to May 2023

Notional Amount Average Fixed Rate  
December 31 December 31 December 31 December 31  
2017 2016 2017 2016 Term at December 31, 2017
$100.0
 $100.0
 1.47% 1.47% Extending to December 2018
56.5
 
 1.94% % November 2017 to November 2022
83.5
 
 2.20% % December 2018 to May 2023
The Company does not apply hedge accounting to the interest rate derivatives which expire December 2018. The fair value of all interest rate swap agreements was a net assetliability of $0.8$2.1 million and a net liability $0.3asset of $1.6 million at December 31, 20172019 and 2016,2018, respectively. The mark-to-market effect of interest rate swap agreements that are considered effective as hedges has been included in OCI. Based on market valuations at December 31, 2017,2019,$0.10.5 million of the amount net deferred loss included in OCI is expected to be reclassified as expense in the Consolidated Statement of Operations over the next twelve months, as cash flow payments are made in accordance with the interest rate swap agreements.

The following table summarizes the fair value of derivative instruments at December 31 as recorded in the Consolidated Balance Sheets:
 Asset Derivatives Liability Derivatives
 Balance sheet location 2019 2018 Balance sheet location 2019 2018
Derivatives designated as hedging instruments          
Cash Flow Hedges           
Interest rate swap agreements           
CurrentPrepaid expenses and other $
 $0.6
 Prepaid expenses and other $
 $
 Other current liabilities 
 
 Other current liabilities 0.7
 
Long-termOther non-current assets 
 1.0
 Other non-current assets 
 
 Other long-term liabilities 
 
 Other long-term liabilities 1.4
 
Foreign currency exchange contracts           
CurrentPrepaid expenses and other 3.1
 2.1
 Prepaid expenses and other 1.5
 0.4
 Other current liabilities 1.7
 3.3
 Other current liabilities 17.1
 12.8
Long-TermOther non-current assets 
 1.0
 Other non-current assets 
 0.6
 Other long-term liabilities 3.5
 0.5
 Other long-term liabilities 9.6
 13.8
Total derivatives designated as hedging instruments $8.3
 $8.5
   $30.3
 $27.6
Derivatives not designated as hedging instruments          
Cash Flow Hedges           
Interest rate swap agreements           
CurrentPrepaid expenses and other $
 $
 Prepaid expenses and other $
 $
     Long-termOther long-term liabilities 
 
 Other long-term liabilities 
 
Foreign currency exchange contracts           
CurrentPrepaid expenses and other 0.4
 0.4
 Prepaid expenses and other 0.2
 0.2
 Other current liabilities 2.3
 1.5
 Other current liabilities 2.4
 0.5
Total derivatives not designated as hedging instruments $2.7
 $1.9
   $2.6
 $0.7
Total derivatives $11.0
 $10.4
   $32.9
 $28.3

 Asset Derivatives Liability Derivatives
 Balance sheet location 2017 2016 Balance sheet location 2017 2016
Derivatives designated as hedging instruments          
Cash Flow Hedges           
Interest rate swap agreements           
CurrentPrepaid expenses and other $
 $
 Prepaid expenses and other $0.1
 $
Long-termOther non-current assets 0.7
 
 Other non-current assets 
 
 Other long-term liabilities 
 
 Other long-term liabilities 0.1
 
Foreign currency exchange contracts           
CurrentPrepaid expenses and other 8.3
 
 Prepaid expenses and other 4.0
 
 Other current liabilities 2.8
 3.7
 Other current liabilities 4.3
 14.0
Long-TermOther non-current assets 3.9
 
 Other non-current assets 1.3
 
 Other long-term liabilities 0.5
 
 Other long-term liabilities 7.7
 10.1
Total derivatives designated as hedging instruments $16.2
 $3.7
   $17.5
 $24.1
Derivatives not designated as hedging instruments          
Cash Flow Hedges           
Interest rate swap agreements           
CurrentPrepaid expenses and other $0.4
 $
 Prepaid expenses and other $
 $
 Other current liabilities 
 
 Other current liabilities 
 0.3
Long-termOther non-current assets 
 0.2
 Other non-current assets 
 
 Other long-term liabilities 
 
 Other long-term liabilities 0.1
 0.2
Foreign currency exchange contracts           
CurrentPrepaid expenses and other 0.8
 
 Prepaid expenses and other 0.4
 
 Other current liabilities 0.1
 1.6
 Other current liabilities 0.8
 3.9
Total derivatives not designated as hedging instruments $1.3
 $1.8
   $1.3
 $4.4
Total derivatives $17.5
 $5.5
   $18.8
 $28.5



NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


The following table summarizes the offsetting of the fair value of derivative instruments on a gross basis by counterparty at December 31, 20172019 and 20162018 as recorded in the Consolidated Balance Sheets:
  Derivative Assets as of December 31, 2019 Derivative Liabilities as of December 31, 2019
  Gross Amounts of Recognized Assets Gross Amounts Offset Net Amounts Presented Net Amount Gross Amounts of Recognized Liabilities Gross Amounts Offset Net Amounts Presented Net Amount
Cash Flow Hedges                
Interest rate swap agreements $
 $
 $
 $
 $2.1
 $
 $2.1
 $2.1
Foreign currency exchange contracts 1.8
 (1.8) 
 
 21.6
 (1.8) 19.8
 19.8
Total derivatives $1.8
 $(1.8) $
 $
 $23.7
 $(1.8) $21.9
 $21.9
                 
  Derivative Assets as of December 31, 2018 Derivative Liabilities as of December 31, 2018
  Gross Amounts of Recognized Assets Gross Amounts Offset Net Amounts Presented Net Amount Gross Amounts of Recognized Liabilities Gross Amounts Offset Net Amounts Presented Net Amount
Cash Flow Hedges                
Interest rate swap agreements $1.6
 $
 $1.6
 $1.6
 $
 $
 $
 $
Foreign currency exchange contracts 2.3
 (2.3) 
 
 21.8
 (2.3) 19.5
 19.5
Total derivatives $3.9
 $(2.3) $1.6
 $1.6
 $21.8
 $(2.3) $19.5
 $19.5

  Derivative Assets as of December 31, 2017 Derivative Liabilities as of December 31, 2017
  Gross Amounts of Recognized Assets Gross Amounts Offset Net Amounts Presented Net Amount Gross Amounts of Recognized Liabilities Gross Amounts Offset Net Amounts Presented Net Amount
Cash Flow Hedges                
Interest rate swap agreements $1.0
 $(0.2) $0.8
 $0.8
 $0.2
 $(0.2) $
 $
Foreign currency exchange contracts 7.3
 (7.3) 
 
 9.4
 (7.3) 2.1
 2.1
Total derivatives $8.3
 $(7.5) $0.8
 $0.8
 $9.6
 $(7.5) $2.1
 $2.1
                 
  Derivative Assets as of December 31, 2016 Derivative Liabilities as of December 31, 2016
  Gross Amounts of Recognized Assets Gross Amounts Offset Net Amounts Presented Net Amount Gross Amounts of Recognized Liabilities Gross Amounts Offset Net Amounts Presented Net Amount
Cash Flow Hedges                
Interest rate swap agreements $0.2
 $(0.2) $
 $
 $0.5
 $(0.2) $0.3
 $0.3
Foreign currency exchange contracts 
 
 
 
 22.7
 
 22.7
 22.7
Total derivatives $0.2
 $(0.2) $
 $
 $23.2
 $(0.2) $23.0
 $23.0
The following table summarizes the pre-tax impact of derivative instruments for each year ended December 31 as recorded in the Consolidated Statements of Operations:
Derivatives in Cash Flow Hedging Relationships 
Amount of Gain or (Loss)
Recognized in OCI on
Derivative (Effective Portion)
 
Location of Gain or
(Loss) Reclassified
from OCI into
Income (Effective
Portion)
 
Amount of Gain or (Loss)
Reclassified from OCI
into Income (Effective Portion)
  2019 2018 2017   2019 2018 2017
Cash Flow Hedges              
Interest rate swap agreements $(3.8) $2.0
 $0.5
 Interest expense $(0.3) $
 $
Foreign currency exchange contracts (18.0) (18.8) 14.1
 Cost of sales (16.2) 2.6
 (5.7)
  $(21.8) $(16.8) $14.6
   $(16.5) $2.6
 $(5.7)
               
Derivatives Not Designated as Hedging Instruments       Location of Gain or (Loss) Recognized in Income on Derivative 
Amount of Gain or (Loss)
Recognized in Income on Derivative
          2019 2018 2017
Cash flow hedges              
Interest rate swap agreements    



Other $
 $0.3
 $0.2
Foreign currency exchange contracts    



Cost of sales (5.3) (2.3) 2.0
Total         $(5.3) $(2.0) $2.2

Derivatives in Cash Flow Hedging Relationships 
Amount of Gain or (Loss)
Recognized in OCI on
Derivative (Effective Portion)
 
Location of Gain or
(Loss) Reclassified
from OCI into
Income (Effective
Portion)
 
Amount of Gain or (Loss)
Reclassified from OCI
into Income (Effective Portion)
 
Location of Gain or
(Loss) Recognized
in Income on
Derivative
(Ineffective
Portion and Amount
Excluded from
Effectiveness
Testing)
 
Amount of Gain or (Loss) Recognized
in Income on Derivative (Ineffective
Portion and Amount Excluded from
Effectiveness Testing)
  2017 2016 2015   2017 2016 2015   2017 2016 2015
Cash Flow Hedges                      
Interest rate swap agreements $0.5
 $
 $
 Interest expense $
 $
 $
 Other $
 $
 $
Foreign currency exchange contracts 14.1
 (15.5) (11.1) Cost of sales (5.7) (3.0) (8.7) Cost of sales (0.1) (0.2) 0.1
  $14.6
 $(15.5) $(11.1)   $(5.7) $(3.0) $(8.7)   $(0.1) $(0.2) $0.1
                       
Derivatives Not Designated as Hedging Instruments Location of Gain or (Loss) Recognized in Income on Derivative 
Amount of Gain or (Loss)
Recognized in Income on Derivative
    2017 2016 2015
Cash flow hedges        
Interest rate swap agreements Other $0.2
 $(0.6) $(0.5)
Foreign currency exchange contracts Cost of sales 2.0
 (2.8) 0.3
Total   

 

 
         $2.2
 $(3.4) $(0.2)


NOTE 9—10—Retirement Benefit Plans
Defined Benefit Plans:  The Company maintains various defined benefit pension plans that provide benefits based on years of service and average compensation during certain periods. The Company’s policy is to make contributions to fund these plans within the range allowed by applicable regulations. Plan assets consist primarily of publicly traded stocks and government and corporate bonds.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

Pension benefits for employees covered under the Company’s U.S. and U.K. plans are frozen. Only certain grandfathered employees in the Netherlands still earn retirement benefits under defined benefit pension plans. All other eligible employees of the Company, including employees whose pension benefits are frozen, receive retirement benefits under defined contribution retirement plans.


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

During 2017, 20162018 and 2015,2017, the Company recognized a settlement loss of $1.0 million, $0.9$1.1 million and $1.3$1.0 million, respectively, resulting from lump-sum distributions exceeding the total projected interest cost for the plan year for its U.S. pension plans.
The assumptions used in accounting for the defined benefit plans were as follows for the years ended December 31:
 2019 2018 2017
United States Plans     
Weighted average discount rates3.02% 4.10% 3.40%
Expected long-term rate of return on assets7.50% 7.50% 7.50%
Non-U.S. Plans     
Weighted average discount rates0.37%-1.85% 1.13%-2.65% 0.88% - 2.40%
Rate of increase in compensation levels1.00%-2.50% 1.50%-2.50% 1.50% - 2.50%
Expected long-term rate of return on assets1.00%-7.00% 1.80%-7.00% 1.70% - 7.00%
 2017 2016 2015
United States Plans     
Weighted average discount rates3.40% 3.75% 4.00%
Expected long-term rate of return on assets7.50% 7.50% 7.50%
Non-U.S. Plans     
Weighted average discount rates0.88% - 2.40% 0.86% - 2.50% 2.10% - 3.70%
Rate of increase in compensation levels1.50% - 2.50% 1.50% - 2.50% 2.00% - 2.50%
Expected long-term rate of return on assets1.70% - 7.00% 3.00% - 7.00% 3.00% - 7.00%

Each year, the assumptions used to calculate the benefit obligation are used to calculate the net periodic pension expense for the following year.
Set forth below is a detail of the net periodic pension expense for the defined benefit plans for the years ended December 31:
 2019 2018 2017
United States Plans     
Interest cost$2.6
 $2.5
 $2.7
Expected return on plan assets(4.5) (4.9) (4.9)
Amortization of actuarial loss2.0
 1.8
 1.8
Amortization of prior service credit
 (0.2) (0.3)
Settlements
 1.1
 1.0
Net periodic pension expense$0.1
 $0.3
 $0.3
Non-U.S. Plans     
Service cost$0.1
 $0.2
 $0.2
Interest cost4.1
 4.0
 4.1
Expected return on plan assets(10.2) (10.5) (9.2)
Amortization of actuarial loss1.9
 2.0
 2.7
Amortization of prior service cost0.1
 
 
Net periodic pension benefit$(4.0) $(4.3) $(2.2)

 2017 2016 2015
United States Plans     
Service cost$
 $
 $
Interest cost2.7
 3.0
 2.9
Expected return on plan assets(4.9) (5.0) (5.5)
Amortization of actuarial loss1.8
 1.6
 1.5
Amortization of prior service credit(0.3) (0.3) (0.3)
Settlements1.0
 0.9
 1.3
Net periodic pension expense (benefit)$0.3
 $0.2
 $(0.1)
Non-U.S. Plans     
Service cost$0.2
 $0.2
 $0.2
Interest cost4.1
 5.0
 5.6
Expected return on plan assets(9.2) (8.8) (9.6)
Amortization of actuarial loss2.7
 1.4
 2.0
Net periodic pension expense (benefit)$(2.2) $(2.2) $(1.8)


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


Set forth below is a detail of other changes in plan assets and benefit obligations recognized in other comprehensive income (loss) for the year ended December 31:
 2019 2018 2017
United States Plans     
Current year actuarial (gain) loss$(0.4) $4.8
 $(2.0)
Amortization of actuarial loss(2.0) (1.8) (1.8)
Amortization of prior service credit
 0.2
 0.3
Curtailments and Settlements
 (1.1) (1.0)
Total recognized in other comprehensive income (loss)$(2.4) $2.1
 $(4.5)
Non-U.S. Plans     
Current year actuarial (gain) loss$(0.1) $18.8
 $(13.8)
Current year prior service (credit) cost
 1.9
 
Amortization of actuarial loss(1.9) (2.0) (2.7)
Amortization of prior service (cost) credit(0.1) 
 
Total recognized in other comprehensive income (loss)$(2.1) $18.7
 $(16.5)

 2017 2016 2015
United States Plans     
Current year actuarial (gain) loss$(2.0) $1.6
 $4.3
Amortization of actuarial loss(1.8) (1.6) (1.5)
Amortization of prior service credit0.3
 0.3
 0.3
Settlements(1.0) (0.9) (1.3)
Total recognized in other comprehensive income (loss)$(4.5) $(0.6) $1.8
Non-U.S. Plans     
Current year actuarial (gain) loss$(13.8) $20.5
 $2.0
Amortization of actuarial loss(2.7) (1.4) (2.0)
Current year prior service credit
 
 (0.1)
Total recognized in other comprehensive income (loss)$(16.5) $19.1
 $(0.1)
The following table sets forth the changes in the benefit obligation and the plan assets during the year and the funded status of the defined benefit plans at December 31:
 2019 2018
 U.S. Plans 
Non-U.S.
Plans
 U.S. Plans 
Non-U.S.
Plans
Change in benefit obligation       
Projected benefit obligation at beginning of year$66.8
 $166.4
 $74.8
 $179.0
Service cost
 0.1
 
 0.2
Interest cost2.6
 4.1
 2.5
 4.0
Actuarial (gain) loss6.5
 17.7
 (3.9) (2.9)
Benefits paid(5.7) (6.9) (4.4) (6.4)
Employee contributions
 0.2
 
 0.2
Plan amendments
 
 
 2.0
Lump sum payments
 
 (2.2) 
Foreign currency exchange rate changes
 4.7
 
 (9.7)
Projected benefit obligation at end of year$70.2
 $186.3
 $66.8
 $166.4
Accumulated benefit obligation at end of year$70.2
 $185.6
 $66.8
 $165.8
Change in plan assets       
Fair value of plan assets at beginning of year$60.7
 $152.3
 $71.0
 $178.3
Actual return on plan assets11.4
 27.9
 (3.7) (12.0)
Employer contributions
 1.2
 
 0.8
Employee contributions
 0.2
 
 0.2
Benefits paid(5.7) (6.9) (4.4) (6.4)
Settlements
 
 (2.2) 
Foreign currency exchange rate changes
 4.8
 
 (8.6)
Fair value of plan assets at end of year$66.4
 $179.5
 $60.7
 $152.3
Funded status at end of year$(3.8) $(6.8) $(6.1) $(14.1)
        

 2017 2016
 U.S. Plans 
Non-U.S.
Plans
 U.S. Plans 
Non-U.S.
Plans
Change in benefit obligation       
Projected benefit obligation at beginning of year$75.7
 $165.2
 $77.3
 $156.1
Service cost
 0.2
 
 0.2
Interest cost2.7
 4.1
 3.0
 5.0
Actuarial (gain) loss2.9
 (1.9) 1.2
 34.6
Benefits paid(4.5) (5.8) (4.2) (5.4)
Employee contributions
 0.1
 
 0.1
Lump sum payments(2.0) 
 (1.6) 
Business acquisition benefit obligation
 
 
 2.5
Foreign currency exchange rate changes
 17.1
 
 (27.9)
Projected benefit obligation at end of year$74.8
 $179.0
 $75.7
 $165.2
Accumulated benefit obligation at end of year$74.8
 $178.4
 $75.7
 $164.7
Change in plan assets       
Fair value of plan assets at beginning of year$67.2
 $138.9
 $68.4
 $144.7
Actual return on plan assets9.8
 20.6
 4.6
 21.1
Employer contributions0.5
 9.2
 
 3.2
Employee contributions
 0.1
 
 0.1
Benefits paid(4.5) (5.8) (4.2) (5.4)
Settlements(2.0) 
 (1.6) 
Foreign currency exchange rate changes
 15.3
 
 (24.8)
Fair value of plan assets at end of year$71.0
 $178.3
 $67.2
 $138.9
Funded status at end of year$(3.8) $(0.7) $(8.5) $(26.3)
        


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


 2019 2018
 U.S. Plans 
Non-U.S.
Plans
 U.S. Plans 
Non-U.S.
Plans
Amounts recognized in the consolidated balance sheets consist of:       
Noncurrent liabilities$(3.8) $(6.8) $(6.1) $(14.1)
 $(3.8) $(6.8) $(6.1) $(14.1)
Components of accumulated other comprehensive income (loss) consist of:       
Actuarial loss$37.3
 $54.9
 $39.7
 $56.9
Prior service cost (credit)
 1.7
 
 1.8
Deferred taxes(9.4) (7.6) (9.9) (8.0)
Change in statutory tax rate0.4
 (2.0) (4.4) (2.0)
Foreign currency translation adjustment
 2.0
 
 2.0
 $28.3
 $49.0
 $25.4
 $50.7
 2017 2016
 U.S. Plans 
Non-U.S.
Plans
 U.S. Plans 
Non-U.S.
Plans
Amounts recognized in the consolidated balance sheets consist of:       
Noncurrent assets$0.1
 $3.8
 $
 $
Noncurrent liabilities(3.9) (4.5) (8.5) (26.3)
 $(3.8) $(0.7) $(8.5) $(26.3)
Components of accumulated other comprehensive income (loss) consist of:       
Actuarial loss$37.9
 $40.1
 $42.7
 $53.3
Prior service credit(0.3) (0.1) (0.6) (0.1)
Deferred taxes(7.8) (5.2) (14.4) (9.0)
Change in statutory tax rate(6.0) (2.0) (1.2) (1.6)
Foreign currency translation adjustment
 2.3
 
 6.1
 $23.8
 $35.1
 $26.5
 $48.7

The projected benefit obligation included in the table above represents the actuarial present value of benefits attributable to employee service rendered to date, including the effects of estimated future pay increases. The accumulated benefit obligation also reflects the actuarial present value of benefits attributable to employee service rendered to date, but does not include the effects of estimated future pay increases.
Expected amortization of amounts included in accumulated other comprehensive income (loss) to be recognized in net periodic benefit cost in 20182020 are:
  Amount Net of tax
Actuarial loss $4.7
 $3.7
Prior service cost $0.1
 $0.1

  Amount Net of tax
Actuarial loss $3.8
 $3.0
Prior service credit $(0.2) $(0.2)
TheIn 2020, the Company expects to contribute $0.5$0.4 million and $3.2 million to its U.S. and non-U.S. pension plans, in 2018. The Company does not expect to contribute to its U.S. pension plans in 2018.respectively.
Pension benefit payments are made from assets of the pension plans. Future pension benefit payments expected to be paid from assets of the pension plans are:
 U.S. Plans Non-U.S. Plans
2020$6.1
 $6.4
20215.9
 6.5
20225.8
 6.7
20235.6
 6.8
20245.3
 7.2
2025 - 202921.7
 41.1
 $50.4
 $74.7
 U.S. Plans Non-U.S. Plans
2018$6.1
 $5.7
20196.0
 6.6
20205.7
 6.6
20215.6
 6.6
20225.5
 6.7
2023 - 202723.9
 39.4
 $52.8
 $71.6

The expected long-term rate of return on defined benefit plan assets reflects management’s expectations of long-term rates of return on funds invested to provide for benefits included in the projected benefit obligations. The Company has established the expected long-term rate of return assumption for plan assets by considering the historical rates of return over a period of time that is consistent with the long-term nature of the underlying obligations of these plans as well as a forward-looking rate of return. The historical and forward-looking rates of return for each of the asset classes used to determine the Company's estimated rate of return assumption were based upon the rates of return earned or expected to be earned by investments in the equivalent benchmark market indices for each of the asset classes.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

Expected returns for most of the Company's pension plans are based on a calculated market-related value of assets. Under this methodology, asset gains and losses resulting from actual returns that differ from the Company’s expected returns are recognized in the market-related value of assets ratably over three years.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

The pension plans maintain an investment policy that, among other things, establishes a portfolio asset allocation methodology with percentage allocation bands for individual asset classes. The investment policy provides that investments are reallocated between asset classes as balances exceed or fall below the appropriate allocation bands.
The following is the actual allocation percentage and target allocation percentage for the Company's U.S. pension plan assets at December 31:
 2019
Actual
Allocation
 2018
Actual
Allocation
 
Target Allocation
Range
U.S. equity securities45.4% 43.7% 36% - 54%
Non-U.S. equity securities20.2% 19.0% 16% - 24%
Fixed income securities33.7% 36.4% 30% - 40%
Money market0.7% 0.9% 0% - 10%

 2017
Actual
Allocation
 2016
Actual
Allocation
 
Target Allocation
Range
U.S. equity securities44.8% 45.4% 36.0% - 54.0%
Non-U.S. equity securities20.0% 19.7% 16.0% - 24.0%
Fixed income securities33.9% 33.9% 30.0% - 40.0%
Money market1.3% 1.0% 0.0% - 10.0%
The following is the actual allocation percentage and target allocation percentage for the Company's U.K. pension plan assets at December 31:
 2019
Actual
Allocation
 2018
Actual
Allocation
 Target Allocation
U.K. equity securities10.4% 20.9% 10%
Non-U.K. equity securities60.7% 48.0% 60%
Fixed income securities28.1% 30.4% 30%
Money market0.8% 0.7% —%

 2017
Actual
Allocation
 2016
Actual
Allocation
 
Target Allocation

U.K. equity securities20.2% 21.2% 21.0%
Non-U.K. equity securities49.3% 48.8% 49.0%
Fixed income securities27.7% 30.0% 30.0%
Money market2.8% —% —%
The Company maintains a pension plan for certain employees in the Netherlands which has purchased annuity contracts to meet its obligations.
The defined benefit pension plans do not have any direct ownership of Hyster-Yale common stock.
The fair value of each major category of U.S. plan assets for the Company’s pension plans are valued using quoted market prices in active markets for identical assets, or Level 1 in the fair value hierarchy. The fair value of each major category of Non-U.S. plan assets for the Company’s pension plans are valued using observable inputs, either directly or indirectly, other than quoted market prices in active markets for identical assets, or Level 2 in the fair value hierarchy. Following are the values as of December 31:
 Level 1 Level 2
 2019 2018 2019 2018
U.S. equity securities$30.2
 $26.5
 $34.4
 $21.2
U.K. equity securities
 
 16.9
 28.8
Non-U.S., non-U.K. equity securities13.4
 11.6
 64.8
 44.8
Fixed income securities22.4
 22.1
 62.1
 56.5
Money market0.4
 0.5
 1.3
 1.0
Total$66.4
 $60.7
 $179.5
 $152.3

 Level 1 Level 2
 2017 2016 2017 2016
U.S. equity securities$31.8
 $30.5
 $26.1
 $20.4
U.K. equity securities
 
 32.8
 26.7
Non-U.S., non-U.K. equity securities14.2
 13.3
 54.0
 42.0
Fixed income securities24.1
 22.7
 60.9
 49.8
Money market0.9
 0.7
 4.5
 
Total$71.0
 $67.2
 $178.3
 $138.9


Defined Contribution Plans: The Company has defined contribution (401(k)) plans for substantially all U.S. employees and similar plans for employees outside of the United States. The Company generally matches employee contributions based on plan provisions. In addition, in the United States and United Kingdom, the Company has defined contribution retirement plans whereby the contribution to participants is determined annually based on a formula that includes the effect of actual compared with targeted operating results and the age and compensation of the participants. Total costs, including Company contributions, for these plans were $26.6 million, $26.5 million and $24.3 million in 2019, 2018 and 2017, respectively.



NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

and compensation of the participants. Total costs, including Company contributions, for these plans were $24.3 million, $21.2 million and $23.5 million in 2017, 2016 and 2015, respectively.


NOTE 10—11—Inventories
Inventories are stated at the lower of cost or market for last-in, first-out (“LIFO”) inventory or lower of cost or net realizable value for first-in, first-out (“FIFO”) inventory. At December 31, 20172019 and 2016, 49%2018, 53% and 54%51%, respectively, of total inventories were determined using the LIFO method, which consists primarily of manufactured inventories, including service parts, in the United States. The FIFO method is used with respect to all other inventories.
The cost components of inventory include raw materials, purchased components, direct and indirect labor, utilities, depreciation, inbound freight charges, purchasing and receiving costs, inspection costs and warehousing costs. Reserves are maintained for estimated obsolescence or excess inventory equal to the difference between the cost of inventory and the net realizable value based upon assumptions about future demand and market conditions. Upon a subsequent sale or disposal of the impaired inventory, the corresponding reserve for impaired value is relieved to ensure that the cost basis of the inventory reflects any write-downs.
Inventories are summarized as follows:
 December 31
 2019 2018
Finished goods and service parts$276.2
 $248.6
Work in process22.1
 30.0
Raw materials310.5
 307.0
Total manufactured inventories608.8
 585.6
LIFO reserve(48.9) (52.0)
Total inventory$559.9
 $533.6

 December 31
 2017 2016
Finished goods and service parts$193.7
 $171.9
Work in process19.9
 26.1
Raw materials239.0
 191.4
Total manufactured inventories452.6
 389.4
LIFO reserve(40.7) (37.2)
Total inventory$411.9
 $352.2


NOTE 11—12—Property, Plant and Equipment, Net
Property, plant and equipment are recorded at cost. Depreciation and amortization are provided in amounts sufficient to amortize the cost of the assets, including assets recorded under capitalfinance leases, over their estimated useful lives using the straight-line method. Buildings are generally depreciated using a 20, 40 or 50-year life, improvements to land and buildings are depreciated over estimated useful lives ranging up to 40 years and equipment is depreciated over estimated useful lives ranging from three to 15 years. Capital grants received for the acquisition of equipment are recorded as reductions of the related equipment cost and reduce future depreciation expense. Repairs and maintenance costs are expensed when incurred.
The Company periodically evaluates long-lived assets, including intangible assets with finite lives, for impairment when changes in circumstances or the occurrence of certain events indicate the carrying amount of an asset may not be recoverable. Upon identification of indicators of impairment, assets and liabilities are grouped at the lowest level for which identifiable cash flows are largely independent of the cash flows of other assets or liabilities. The asset group would be considered impaired when the estimated future undiscounted cash flows generated by the asset group are less than carrying value. If the carrying value of an asset group is considered impaired, an impairment charge is recorded for the amount that the carrying value of the asset group exceeds its fair value. Fair value is estimated as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date.


During the fourth quarter of 2017, in connection with the preparation of the Company's annual operating plan for 2018 and longer-term forecast, the Company identified indicators of impairment at Nuvera due to the extension of time expected to commercialize Nuvera's products and the related length of time needed to achieve break-even operating results and positive cash flows. Accordingly, the Company performed an impairment analysis during the fourth quarter of 2017 of Nuvera's long-lived assets, including property, plant and equipment and intangible assets with finite lives.Basedlives. Based on this analysis, it was determined that the fair value of these assets was less than the respective carrying amounts of such assets, and accordingly, the Company recognized an impairment charge of $4.9 million in the Nuvera segment, which is included in selling, general and administrative expenses in the consolidated statement of operations. The impairment charge reduced property, plant, and equipment by $3.7 million and intangible assets by $1.2 million. The estimated fair value of intangible assets with finite lives

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

was determined using a relief from royalty method and property, plant and equipment was determined using a cost approach. These valuation methods use Level 3 inputs under the fair value hierarchy.



NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

Property, plant and equipment, net includes the following:
 December 31
 2019 2018
Land and land improvements$31.8
 $32.9
Plant and equipment764.0
 740.0
Property, plant and equipment, at cost795.8
 772.9
Allowances for depreciation and amortization(487.3) (476.7)
 $308.5
 $296.2
 December 31
 2017 2016
Land and land improvements$27.4
 $26.3
Plant and equipment700.4
 645.1
Property, plant and equipment, at cost727.8
 671.4
Allowances for depreciation and amortization(462.4) (416.3)
 $265.4
 $255.1

Total depreciation and amortization expense on property, plant and equipment was $36.7 million, $37.4 million $34.5 million and $28.4$37.4 million during 2017, 2016,2019, 2018, and 2015,2017, respectively.


NOTE 12—13—Goodwill and Intangible Assets


The Company evaluates the carrying amount of goodwill and indefinite-lived intangible assets for impairment annually as of May 1st and between annual evaluations if changes in circumstances or the occurrence of certain events indicate potential impairment. The Company uses either a qualitative or quantitative analysis to determine whether fair value exceeds carrying value. Goodwill impairment testing for 20172019 was performed using a quantitative analysis for each reporting unit. As part of ourthe quantitative testing process for goodwill, the Company estimated fair values using a discounted cash flow approach from the perspective of a market participant. Significant estimates in the discounted cash flow approach are cash flow forecasts of the reporting units, the discount rate, the terminal business value and the projected income tax rate. The cash flow forecasts of the reporting units are based upon management’s long-term view of markets and are the forecasts that are used by senior management and the Board of Directors to evaluate operating performance. The discount rate utilized is management’s estimate of what the market’s weighted average cost of capital is for a company with a similar debt rating and stock volatility, as measured by beta. The projected income tax rates utilized are the statutory tax rates for the countries where each reporting unit operates. The terminal business value is determined by applying a business growth factor to the latest year for which a forecast exists. As part of the goodwill quantitative testing process, the Company evaluates whether there are reasonably likely changes to management’s estimates that would have a material impact on the results of the goodwill impairment testing.


The annual testing of goodwill for impairment was conducted as of May 1, 2017.2019. The fair value of each reporting unit was in excess of its carrying value and thus, no impairment exists.


The indefinite-lived intangible assets are the Bolzoni trademarks. Fair values used in testing for potential impairment of the trademarks are calculated by applying an estimated market value royalty rate to the forecasted revenues of the businesses that utilize those assets. The assumed cash flows from this calculation are discounted using the Company’sBolzoni’s weighted average cost of capital. The annual testing of indefinite-lived intangibles for impairment was conducted as of May 1, 2017.2019. The fair value of the indefinite-lived intangible assets was in excess of its carrying value and thus, no impairment exists.


The following table summarizes intangible assets, other than goodwill, recorded in the consolidated balance sheets:
December 31, 2017 Gross Carrying Amount Accumulated Amortization Net Balance
Intangible assets not subject to amortization      
Trademarks $18.0
 $
 $18.0
Intangible assets subject to amortization      
Customer and contractual relationships 30.5
 (6.4) 24.1
Patents and technology 16.5
 (3.1) 13.4
Trademarks 0.6
 
 0.6
Total $65.6
 $(9.5) $56.1


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


The following table summarizes intangible assets, other than goodwill, recorded in the consolidated balance sheets:
December 31, 2019 Gross Carrying Amount Accumulated Amortization Net Balance
Intangible assets not subject to amortization      
Trademarks $16.9
 $
 $16.9
Intangible assets subject to amortization      
Customer and contractual relationships 38.9
 (13.5) 25.4
Patents and technology 20.6
 (7.3) 13.3
Trademarks 5.3
 (0.8) 4.5
Total $81.7
 $(21.6) $60.1
December 31, 2018 Gross Carrying Amount Accumulated Amortization Net Balance
Intangible assets not subject to amortization      
Trademarks $17.2
 $
 $17.2
Intangible assets subject to amortization      
Customer and contractual relationships $39.5
 $(10.0) $29.5
Patents and technology 20.9
 (4.9) 16.0
Trademarks 5.4
 (0.4) 5.0
Total $83.0
 $(15.3) $67.7

December 31, 2016 Gross Carrying Amount Accumulated Amortization Net Balance
Intangible assets not subject to amortization      
Trademarks $15.8
 $
 $15.8
Intangible assets subject to amortization      
Customer and contractual relationships $27.9
 $(2.9) $25.0
Patents and technology 16.3
 (2.0) 14.3
Trademarks 1.2
 (0.1) 1.1
Total $61.2
 $(5.0) $56.2


As further described in Note 11,12, in 2017 the Company recognized a $1.2 million impairment charge for Nuvera consisting of $0.8 million and $0.4 million for patents and technology and trademarks, respectively.


Amortization expense for intangible assets, which is recognized on a straight-line basis over the estimated useful life of the related asset, was $5.7$6.6 million and $4.6$6.6 million in 20172019 and 2016,2018, respectively. Expected annual amortization expense of other intangible assets, based upon December 31, 20172019 U.S. dollar values, for the next five years is as follows: $4.9$5.7 million in 2018,2020, $4.8 million in 2019, $4.52021, $4.3 million in 2020, $3.62022, $4.3 million in 20212023 and $3.1$4.3 million in 2022.2024. The weighted-average amortization period for intangible assets is as follows:

Intangible assets subject to amortization Weighted-Average Useful Lives (Years)
Customer relationships 1012
Engineering drawings 9
Non-compete agreement27
Patents 76
Trademarks 1017


The following table summarizes goodwill by segment as of December 31, 20172019 and 2016:2018:
  Carrying Amount of Goodwill
  Americas EMEA JAPIC Bolzoni Total
Balance at January 1, 2018 $1.7
 $0.8
 $
 $56.6
 $59.1
Additions 
 0.3
 55.1
 
 55.4
Foreign currency translation 
 
 (3.6) (2.6) (6.2)
Balance at December 31, 2018 $1.7
 $1.1
 $51.5
 $54.0
 $108.3
Foreign currency translation 
 (0.1) (0.6) (0.9) (1.6)
Balance at December 31, 2019 $1.7
 $1.0
 $50.9
 $53.1
 $106.7

  Carrying Amount of Goodwill
  Americas EMEA Bolzoni Total
Balance at January 1, 2016 $
 $
 $
 $
Additions 1.7
 
 54.2
 55.9
Foreign currency translation 
 
 (5.2) (5.2)
Balance at December 31, 2016 $1.7
 $
 $49.0
 $50.7
Additions 
 0.8
 1.0
 1.8
Foreign currency translation 
 
 6.6
 6.6
Balance at December 31, 2017 $1.7
 $0.8
 $56.6
 $59.1




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


NOTE 13—14—Current and Long-Term Financing
The following table summarizes available and outstanding borrowings:
 December 31
 2019 2018
Total outstanding borrowings:   
Revolving credit agreements$7.7
 $13.3
Term loan, net172.2
 181.3
Other debt86.1
 89.6
Finance lease obligations21.0
 17.3
Total debt outstanding$287.0
 $301.5
Plus: discount on term loan and unamortized deferred financing fees2.8
 3.7
Total debt outstanding, gross$289.8
 $305.2
Current portion of borrowings outstanding$82.3
 $91.4
Long-term portion of borrowings outstanding$204.7
 $210.1
Total available borrowings, net of limitations, under revolving credit agreements$260.6
 $217.5
Unused revolving credit agreements$252.9
 $204.2
Weighted average stated interest rate on total borrowings4.6% 5.0%
Weighted average effective interest rate on total borrowings (including interest rate swap agreements)3.6% 4.0%

 December 31
 2017 2016
Total outstanding borrowings:   
Revolving credit agreements$6.1
 $116.0
Term loan, net190.9
 
Other debt73.9
 68.5
Capital lease obligations19.8
 26.7
Total debt outstanding$290.7
 $211.2
Plus: discount on term loan and unamortized deferred financing fees4.1
 
Total debt outstanding, gross$294.8
 $211.2
Current portion of borrowings outstanding$74.5
 $129.0
Long-term portion of borrowings outstanding$216.2
 $82.2
Total available borrowings, net of limitations, under revolving credit agreements$218.8
 $291.2
Unused revolving credit agreements$212.7
 $175.2
Weighted average stated interest rate on total borrowings5.2% 4.4%
Weighted average effective interest rate on total borrowings (including interest rate swap agreements)3.9% 4.4%
Annual maturities of total debt, excluding capitalfinance leases, are as follows:
2020$74.7
202133.7
202215.4
2023145.0
2024
Thereafter
 $268.8

2018$68.5
201931.3
202010.1
202110.1
202210.0
Thereafter145.0
 $275.0
Interest paid on total debt was $13.6$19.5 million, $5.615.0 million and $3.613.6 million during 20172019, 20162018 and 20152017, respectively.


The Company has a $200.0$240.0 million secured, floating-rate revolving credit facility (the "Facility”"Facility") that expires in April 2022. There were no$0.3 million of borrowings outstanding under the Facility at December 31, 2017.2019. The excess availability under the Facility, at December 31, 2017,2019, was $195.9$234.7 million, which reflects reductions of $4.1$5.0 million for letters of credit and other restrictions. TheAs of December 31, 2019, the Facility consistsconsisted of a U.S. revolving credit facility in the amount of $120.0$150.0 million and a non-U.S. revolving credit facility in the amount of $80.0$90.0 million. The Facility can be increased up to the total aggregate amount of $300.0 million over the term of the agreement in minimum increments of $10.0 million subject to certain conditions. The obligations under the Facility are generally secured by a first priority lien on the working capital assets of the borrowers in the Facility, which include but are not limited to, cash and cash equivalents, accounts receivable and inventory (the "Facility Collateral") and a second priority lien on the Term Loan Collateral (defined below). The approximate book value of assets held as collateral under the Facility was $1.0 billion$900 million as of December 31, 2017.2019.
    
Borrowings bear interest at a floating rate based on a base rate or LIBOR, as defined in the Facility, plus an applicable margin. The applicable margins, as of December 31, 2017,2019, for U.S. base rate loans and LIBOR loans were 0.25%0.50% and 1.25%1.50%, respectively. The applicable margins,margin, as of December 31, 2017,2019, for non-U.S. base rate loans and LIBOR loans was 1.25%1.50%. The applicable LIBOR interest rates for the borrowings outstanding under the Facility on December 31, 2017 were 2.73% and 1.25%, respectively, for the U.S. and non-U.S. facility including the applicable floating rate margin.2019 was 1.50%. The Facility also required the payment of a fee of 0.350%0.250% per annum on the unused commitment as of December 31, 2017.2019.


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


The Facility includes restrictive covenants, which, among other things, limit additional borrowings and investments of the Company and its subsidiaries subject to certain thresholds, as definedset forth in the Facility, and limits the payment of dividends. If

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

average availability for both total and U.S. revolving credit facilities, on a pro forma basis, is greater than fifteen percent15% and less than or equal to twenty percent,20%, the Company may pay dividends subject to achieving a minimum fixed charge coverage ratioFixed Charge Coverage Ratio of 1.00 to 1.00, as defined in the Facility. If the average availability is greater than twenty percent20% for both total and U.S. revolving credit facilities, on a pro forma basis, the Company may pay dividends without any minimum fixed charge coverage ratioFixed Charge Coverage Ratio requirement. The Facility also requires the Company to achieve a minimum fixed charge coverage ratioFixed Charge Coverage Ratio in certain circumstances in which total excess availability is less than ten percent10% of the total commitments under the Facility or excess availability under the U.S. revolving credit facility is less than ten percent10% of the U.S. revolver commitments, as defined in the Facility. At December 31, 2017,2019, the Company was in compliance with the covenants in the Facility.


In 2017, theThe Company entered into an agreement foralso has a $200.0 million term loan (the “Term Loan”"Term Loan"), which matures in May 2023. The Term Loan requires quarterly principal payments on the last business day of each March, June, September and December commencing September 30, 2017 in an amount equal to $2.5 million and themillion. The final principal repayment is due on the May 30, 2023. The Company may also be required to make mandatory prepayments, in certain circumstances, as provided in the Term Loan. At December 31, 2017,2019, there was $195.0$175.0 million of principal outstanding under the Term Loan which has been reduced in the Consolidated Balance Sheet by $4.1$2.8 million of discounts and unamortized deferred financing fees.


The obligations under the Term Loan are generally secured by a first priority lien on the present and future shares of capital stock, material real property, fixtures and general intangibles consisting of intellectual property (collectively, the "Term Loan Collateral") and a second priority lien on the remaining collateral of the U.S. borrowers in the Facility.Facility Collateral. The approximate book value of assets held as collateral under the Term Loan was $710$600 million as of December 31, 2017.2019.


Borrowings under the Term Loan bear interest at a floating rate, which can be a base rate or Eurodollar rate, as defined in the Term Loan, plus an applicable margin. The applicable margin, is based on the consolidated leverage ratio, as provided in the Term Loan, and ranges from 2.75% to 3.00%is 2.25% for U.S. base rate loans and 3.75% to 4.00%3.25% for Eurodollar loans. The weighted average interest rate on the amount outstanding under the Term Loan at December 31, 20172019 was 5.57%5.05%. In addition, the Term Loan includes restrictive covenants, which, among other things, limit additional borrowings and investments of the Company subject to certain thresholds, as provided in the Term Loan.thresholds. The Term Loan limits the payment of regularly scheduled dividends and other restricted payments to $50.0 million in any fiscal year, unless the consolidated total net leverage ratio, as defined in the Term Loan, does not exceed 1.75 to 1.00 at the time of the payment. At December 31, 2017,2019, the Company was in compliance with the covenants in the Term Loan.


The Company incurred fees and expenses of $0.4 million, $0.6 million and $4.7 million in 2019, 2018 and $1.7 million in 2017, and 2016, respectively. These fees related to the amendment toamending the Facility and entry into and amending the Term Loan. These fees were deferred and are being amortized as interest expense over the term of the applicable debt agreements. Fees related to the Term Loan are presented as a direct deduction of the corresponding debt.


The Company had other debt outstanding, excluding capitalfinance leases, of approximately $80.0$93.5 million at December 31, 2017.2019. In addition to the excess availability under the Facility, the Company had remaining availability of $16.8$18.2 million related to other non-U.S. revolving credit agreements.


NOTE 14—15—Leasing Arrangements

On January 1, 2019, the Company adopted Accounting Standards Codification ("ASC") Topic 842, "Leases" ("new lease standard"). The new lease standard was adopted using the optional transition method approach that allows for the cumulative effect adjustment to be recorded without restating prior periods. The Company leases certain office, manufacturinghas elected the practical expedient package related to the identification, classification and warehouse facilities and machinery and equipment under noncancellable capital and operatingaccounting for initial direct costs whereby prior conclusions do not have to be reassessed for leases that expire at various dates through 2031. Manycommenced before the effective date. As the Company will not reassess such conclusions, the Company has not adopted the practical expedient to use hindsight to determine the likelihood of whether a lease will be extended or terminated or whether a purchase option will be exercised.

The Company's adoption of the new lease standard included new processes and controls regarding asset financing transactions, financial reporting and a system-related implementation required for the new lease standard. The Company's accounting for finance leases include renewal and/or fair value purchase options.(formerly referred to as capital leases prior to the adoption of the new lease standard) remained substantially unchanged. The impact of the adoption of the new lease standard included the recognition of right-of-use ("ROU") assets and lease liabilities. The adoption of the new lease standard resulted in additional net lease assets and net lease liabilities of approximately $82.7 million and $80.8 million, respectively, as of January 1, 2019. The $80.8 million is net of $6.2 million of lease related liabilities which had been recorded under previous accounting standards and have been reclassified as a contra-


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


Future minimum capitalasset under the new standard. In addition, a cumulative adjustment was recorded to increase retained earnings by $1.4 million as of January 1, 2019, for certain sales-leaseback transactions for which profit recognition was deferred previously under accounting standards but is no longer deferred under the new lease standard. The new lease standard did not materially affect the Company's consolidated net earnings and had no impact on cash flows for the year ended December 31, 2019.

As of January 1, 2019, the cumulative effect on the Company’s unaudited condensed consolidated balance sheet for the adoption of the new lease standard was as follows:
 Balance at December 31, 2018 Adjustments due to New Lease Standard Balance at January 1, 2019
Other non-current assets$36.4
 $82.7
 $119.1
Deferred income tax assets26.3
 (0.5) 25.8
Other current liabilities154.1
 16.3
 170.4
Other long-term liabilities130.2
 64.5
 194.7
Retained earnings407.3
 1.4
 408.7

In accordance with the new lease standard, the Company determines if an arrangement contains a lease and the classification of that lease, if applicable, at inception. The Company has elected to not recognize a lease liability or ROU asset for short-term leases (leases with an initial term of twelve months or less). For contracts with lease and non-lease components, the Company has elected not to allocate the contract consideration, and to account for the lease and non-lease components as a single lease component. ROU assets represent the right to use an underlying asset for the lease term and lease liabilities represent the obligation to make lease payments under the lease. Operating lease ROU assets and liabilities are recognized at the lease commencement date based on the present value of lease payments over the lease term. The implicit rate within the operating leases are generally not determinable and the Company has obtained rates from third-party financiers for relevant geographies, currencies and lease terms to determine the incremental borrowing rate at the date of adoption of the new lease standard and at the inception of new leases. The operating lease ROU asset also includes any lease prepayments, offset by lease incentives. Certain of the Company's leases include options to extend or terminate the lease. An option to extend the lease is considered in connection with determining the ROU asset and lease liability when it is reasonably certain the Company will exercise that option. An option to terminate is also considered in connection with determining the ROU asset and lease liability unless it is reasonably certain the Company will not exercise the option. Lease expense for operating lease payments at is recognized on a straight-line basis over the term of the lease.

As of December 31, 2017 are:2019, the Company had the following amounts recorded on the Company's unaudited condensed consolidated balance sheet:
  Location on Balance Sheet December 31, 2019
Assets    
Operating lease assets Other non-current assets $76.3
Finance lease assets Property, plant and equipment, net 26.3
Total   $102.6
Liabilities    
Current    
Operating lease liabilities Other current liabilities 18.0
Finance lease liabilities Current maturities of long-term debt 8.5
Long-term    
Operating lease liabilities Other long-term liabilities 62.3
Finance lease liabilities Long-term debt 12.5
Total   $101.3

Finance lease assets are recorded net of accumulated amortization of $13.5 million as of December 31, 2019. In addition, leases with HYGFS included in the unaudited condensed consolidated balance sheet at December 31, 2019, include $17.7 million of ROU assets and $17.8 million of lease liabilities.


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)
 
Capital
Leases
 
Operating
Leases
2018$7.1
 $20.2
20195.9
 13.9
20204.9
 10.3
20212.4
 7.4
2022
 6.1
Subsequent to 2022
 17.0
Total minimum lease payments20.3
 $74.9
Amounts representing interest0.5
  
Present value of net minimum lease payments19.8
  
Current maturities6.8
  
Long-term capital lease obligation$13.0
  

Rental expense for all operating leases was $22.5 million, $17.3 millionAs of December 31, 2019, the Company had the following remaining lease term and $18.3 million for 2017, 2016 and 2015, respectively. weighted average discount rates:
  Operating Leases Finance Leases
Weighted-average remaining lease term in years 7.12
 3.10
Weighted-average discount rate 5.11% 3.46%

For the December 31, 2019, the Company recorded the following amounts:
    Year Ended
  Location on Income Statement December 31, 2019
Operating lease cost Cost of sales $8.6
Operating lease cost Selling, general and administrative expenses 16.3
Finance lease cost    
Amortization of leased assets Cost of sales 7.8
Interest on lease liabilities Interest expense 0.6
Sublease income Revenues (11.5)
Total   $21.8

The Company also recognized $7.9 million, $5.3 million and $2.7 million in rentalrecognizes sublease income on subleases of equipment for 2017, 2016 and 2015, respectively. These subleases were primarily related to lift trucks in which the Company records revenues over the term of the lease in accordance with the rental agreements with its customers. The sublease rental income for these lift trucks is included in “Revenues” and the related rent expense is included in “Cost of sales” in the Consolidated Statements of Operations for each period. Aggregate future minimum rentals to be received under noncancellable subleases of lift trucks as of December 31, 20172019 were $30.1 million.

For the year ended December 31, 2019, the Company recorded the following amounts:
  Year Ended
  December 31, 2019
Cash paid for lease liabilities  
Operating cash flows from operating leases $24.2
Operating cash flows from finance leases 0.6
Financing cash flows from finance leases 7.9
Non-cash amounts related to right-of-use assets obtained in exchange for lease obligations  
Operating 18.3
Finance 4.4

Annual maturities of lease liabilities are $26.8 million.as follows:
  Operating Leases Finance Leases Total
2020 $21.2
 $9.0
 $30.2
2021 16.8
 6.2
 23.0
2022 13.7
 3.2
 16.9
2023 10.4
 2.3
 12.7
2024 7.6
 1.0
 8.6
Thereafter 27.2
 0.1
 27.3
  96.9
 21.8
 118.7
Less: Interest (16.6) (0.8) (17.4)
Net $80.3
 $21.0
 $101.3

The Company leases certain office, manufacturing and warehouse facilities and machinery and equipment under noncancellable finance and operating leases that expire at various dates through 2037. Many leases include renewal and/or fair value purchase options.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

Assets recorded under capitalfinance leases are included in property, plant and equipment and consist of the following:
 December 31
 2019 2018
Plant and equipment$39.8
 $38.7
Less accumulated amortization(13.5) (13.5)
 $26.3
 $25.2

 December 31
 2017 2016
Plant and equipment$35.9
 $37.5
Less accumulated amortization(10.4) (8.1)
 $25.5
 $29.4
Amortization of plant and equipment under capitalfinance leases is included in depreciation expense. CapitalFinance lease obligations of $0.2$7.9 million, $12.84.7 million and $15.20.2 million were incurred in connection with lease agreements to acquire machinery and equipment during 20172019, 20162018 and 20152017, respectively.


NOTE 15—16—Product Warranties


The Company provides a standard warranty on its lift trucks, generally for six to twelve months or 1,000 to 2,000 hours. For certain series of lift trucks, the Company provides a standard warranty of one to two years or 2,000 or 4,000 hours. For components in some series of lift trucks, the Company provides a standard warranty of two to three years or 4,000 to 6,000 hours. The Company estimates the costs which may be incurred under its standard warranty programs and records a liability for such costs at the time product revenue is recognized.


In addition, the Company sells separately priced extended warranty agreements that generally provide a warranty for an additional two to five years or up to 2,400 to 10,000 hours. The specific terms and conditions of those warranties vary depending upon the product sold and the country in which the Company does business. Revenue received for the sale of extended warranty contracts is deferred and recognized in the same manner as the costs incurred to perform under the warranty contracts.


The Company also maintains a quality enhancement program under which it provides for specifically identified field product improvements in its warranty obligation. Accruals under this program are determined based on estimates of the potential number of claims and the cost of those claims based on historical costs.


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


The Company periodically assesses the adequacy of its recorded warranty liabilities and adjusts the amounts as necessary. Factors that affect the warranty liability include the number of units sold, historical and anticipated rates of warranty claims and the cost per claim.


Changes in the Company's current and long-term warranty obligations, including deferred revenue on extended warranty contracts, are as follows:
 2019 2018
Balance at January 1$56.9
 $51.0
Current year warranty expense42.1
 34.8
Change in estimate related to pre-existing warranties2.5
 (0.8)
Payments made(36.1) (27.2)
Foreign currency effect(0.2) (0.9)
Balance at December 31$65.2
 $56.9

 2017 2016
Balance at January 1$52.3
 $55.5
Current year warranty expense32.2
 35.4
Change in estimate related to pre-existing warranties(8.9) (10.1)
Payments made(26.5) (27.9)
Foreign currency effect1.9
 (0.6)
Balance at December 31$51.0
 $52.3


NOTE 16—17—Contingencies


Various legal and regulatory proceedings and claims have been or may be asserted against the Company relating to the conduct of its businesses, including product liability, environmental and other claims. These proceedings and claims are incidental to the ordinary course of business. Management believes that it has meritorious defenses and will vigorously defend the Company in these actions. Any costs that management estimates will be paid as a result of these claims are accrued when the liability is considered probable and the amount can be reasonably estimated. Although the ultimate disposition of these proceedings is not presently determinable, management believes, after consultation with its legal counsel, that the likelihood is remote that costs will be incurred materially in excess of accruals already recognized.


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


The Company previously filed legal actions in Brazil to recover certain social integration and social contribution taxes paid over gross sales, including ICMS receipts, which is a form of state value added tax. During the third quarter of 2019, the Company’s Brazil legal advisors notified the Company that they received judicial notification in April 2019 that the Superior Judicial Court rendered a favorable decision on the case granting the Company the right to recover, through offset of federal tax liabilities, amounts of overpayments collected by the government from 1999 to date. The judicial court decision is final and not subject to appeals. Based on analysis performed to date, the current estimate of the refund calculated on a gross basis is approximately 100 million Brazilian reais, or approximately $25 million.

The amount and ultimate timing of realization of these recoveries is dependent upon administrative approvals, generation of federal tax liabilities in Brazil eligible for offset and potential impacts of future legislative actions within Brazil, all of which are uncertain. Based upon a probability weighted analysis, including a review of historical earnings and trends, forecasted earnings, the relevant expiration of carryforwards and the potential of selling the credits at a significant discount, the Company determined the net realizable value of the credits is approximately $8 million Brazilian reais, or $2 million. These credits are recorded on the line “Cost of sales” in the Consolidated Statements of Operations. The Company currently expects to realize this amount within the next one to five years. Future legislative changes in Brazil, changes in the Company’s forecasted earnings or resolution of other uncertainties could impact the estimate of the amount realizable for these tax credits. 

The Brazilian tax authorities have sought clarification before the Brazilian Supreme Court of certain matters, including the amount of these credits (i.e., the gross rate or net credit amount), and certain other matters that could affect the rights of Brazilian taxpayers regarding these credits, all of which would materially impact the realization of the credits. Based on the opinions of our tax and legal advisors, we have not accrued any amounts related to potential future litigation regarding these credits.

NOTE 17—18—Guarantees


Under various financing arrangements for certain customers, including independent retail dealerships, the Company provides recourse or repurchase obligations such that it would be obligated in the event of default by the customer. Terms of the third-party financing arrangements for which the Company is providing recourse or repurchase obligations generally range from one to five years. Total amounts subject to recourse or repurchase obligations at December 31, 20172019 and 20162018 were $203.5$179.7 million and $149.3192.7 million, respectively. As of December 31, 20172019, losses anticipated under the terms of the recourse or repurchase obligations were not significant and reserves have been provided for such losses based on historical experience in the accompanying consolidated financial statements. The Company generally retains a security interest in the related assets financed such that, in the event the Company would become obligated under the terms of the recourse or repurchase obligations, the Company would take title to the assets financed. The fair value of collateral held at December 31, 20172019 was approximately $254.8$238.4 million based on Company estimates. The Company estimates the fair value of the collateral using information regarding the original sales price, the current age of the equipment and general market conditions that influence the value of both new and used lift trucks. The Company also regularly monitors the external credit ratings of the entities for which it has provided recourse or repurchase obligations. As of December 31, 20172019, the Company did not believe there was a significant risk of non-payment or non-performance of the obligations by these entities; however, there can be no assurance that the risk may not increase in the future. In addition, the Company has an agreement with WF to limit its exposure to losses at certain eligible dealers. Under this agreement, losses related to $54.3$31.0 million of recourse or repurchase obligations for these certain eligible dealers are limited to 7.5% of their original loan balance, or $12.0$11.3 million as of December 31, 20172019. The $54.3$31.0 million is included in the $203.5$179.7 million of total amounts subject to recourse or repurchase obligations at December 31, 20172019.


Generally, the Company sells lift trucks through its independent dealer network or directly to customers. These dealers and customers may enter into a financing transaction with HYGFS or other unrelated third parties. HYGFS provides debt and lease financing to both dealers and customers. On occasion, the credit quality of a customer or credit concentration issues within WF may require the Company to provide recourse or repurchase obligations of the lift trucks purchased by customers and financed through HYGFS. At December 31, 20172019, approximately $174.2$144.8 million of the Company's total recourse or repurchase obligations of $203.5$179.7 million related to transactions with HYGFS. In connection with the joint venture agreement, the Company also provides a guarantee to WF for 20% of HYGFS’ debt with WF, such that the Company would become liable under the terms of HYGFS’ debt agreements with WF in the case of default by HYGFS. At December 31, 20172019, loans from WF to HYGFS totaled $1.2 billion. Although the Company’s contractual guarantee was $239.3 million, the loans by WF to HYGFS are secured by HYGFS’ customer receivables, of which the Company guarantees $144.8 million. Excluding the HYGFS


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


to HYGFS totaled $1.0 billion. Although the Company’s contractual guarantee was $205.9 million, the loans by WF to HYGFS are secured by HYGFS’ customer receivables, of which the Company guarantees $174.2 million. Excluding the HYGFS receivables guaranteed by the Company from HYGFS’ loans to WF, the Company’s incremental obligation as a result of this guarantee to WF is $179.6$214.3 million, which is secured by 20% of HYGFS' customer receivables and other secured assets of $272.3$302.7 million. HYGFS has not defaulted under the terms of this debt financing in the past, and although there can be no assurances, the Company is not aware of any circumstances that would cause HYGFS to default in future periods.


The following table includes the exposure amounts related to the Company's guarantees at December 31, 2017:2019:
  HYGFS Total
Total recourse or repurchase obligations $144.8
 $179.7
Less: exposure limited for certain dealers 31.0
 31.0
Plus: 7.5% of original loan balance 11.3
 11.3
  125.1
 160.0
Incremental obligation related to guarantee to WF 214.3
 214.3
Total exposure related to guarantees $339.4
 $374.3

  HYGFS Total
Total recourse or repurchase obligations $174.2
 $203.5
Less: exposure limited for certain dealers 54.3
 54.3
Plus: 7.5% of original loan balance 12.0
 12.0
  131.9
 161.2
Incremental obligation related to guarantee to WF 179.6
 179.6
Total exposure related to guarantees $311.5
 $340.8


NOTE 18—19—Debt and Equity Investments and Related Party Transactions

The Company maintains an interest in one variable interest entity, HYGFS. HYGFS is a joint venture with WF formed primarily for the purpose of providing financial services to independent Hyster® and Yale® lift truck dealers and National Account customers in the United States and is included in the Americas segment. The Company does not have a controlling financial interest or have the power to direct the activities that most significantly affect the economic performance of HYGFS. Therefore, the Company has concluded that the Company is not the primary beneficiary and uses the equity method to account for its 20% interest in HYGFS. The Company does not consider its variable interest in HYGFS to be significant.
Generally, the Company sells lift trucks through its independent dealer network or directly to customers. These dealers and customers may enter into a financing transaction with HYGFS or other unrelated third parties. HYGFS provides debt financing to dealers and lease financing to both dealers and customers. HYGFS’ total purchases of Hyster® and Yale® lift trucks from dealers, and directly from the Company such that HYGFS could provide retail lease financing to customers for the years ended December 31, 20172019, 20162018 and 20152017 were $475.9$514.1 million, $438.8536.2 million and $483.2475.9 million, respectively. Of these amounts, $71.1$126.4 million, $69.479.5 million and $78.671.1 million for the years ended December 31, 20172019, 20162018 and 20152017, respectively, were invoiced directly from the Company to HYGFS so that the customer could obtain operating lease financing from HYGFS. Amounts receivable from HYGFS were $10.4$9.0 million and $12.111.2 million at December 31, 20172019 and 2016,2018, respectively. The Company provides recourse for certain financing provided by HYGFS to its dealers and customers. In addition, the Company also provides a guarantee to WF for their portion of HYGFS' debt. Refer to Note 1718 for additional details relating to the guarantees provided to WF.
In addition to providing financing to dealers, HYGFS provides operating lease financing to the Company. Operating lease obligations primarily relate to specific sale-leaseback-sublease transactions for certain customers whereby the Company sells lift trucks to HYGFS, leases these lift trucks back under an operating lease agreement and then subleases those lift trucks to customers under an operating lease agreement. Total obligations to HYGFS under the operating lease agreements were $15.8$21.2 million and $17.215.5 million at December 31, 20172019 and 20162018, respectively. In addition, the Company provides certain subsidies to its dealers that are paid directly to HYGFS. Total subsidies were $3.3$6.0 million, $2.85.0 million and $2.83.3 million for 20172019, 20162018 and 20152017, respectively.


The Company provides certain services to HYGFS for which it receives compensation under the terms of the joint venture agreement. The services consist primarily of administrative functions and remarketing services. Total income recorded by the Company related to these services was $9.5$7.0 million in 20172019, $9.88.0 million in 20162018 and $14.69.5 million in 20152017. In addition, in December 2015, the Company received $5.0 million as an amendment fee, that was deferred and is being recognized over the remaining term of the agreement which expires in December 2018.
The Company has a 50% ownership interest in SN, a limited liability company that was formed primarily to manufacture and distribute Sumitomo-branded lift trucks in Japan and export Hyster®- and Yale®- branded lift trucks and related components and service parts outside of Japan. The Company purchases products from SN under agreed-upon terms. The Company’s ownership

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

in SN is also accounted for using the equity method of accounting and is included in the JAPIC segment. The Company purchases products from SN under normal trade terms based on current market prices. In 20172019, 20162018 and 20152017, purchases from SN were $46.8$45.5 million, $55.065.4 million and $57.146.8 million, respectively. Amounts payable to SN at December 31, 20172019 and 20162018 were $18.1$15.6 million and $16.521.3 million, respectively.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

The Company recognized income of $0.4$0.3 million, $0.50.4 million and $0.30.4 million for payments from SN for use of technology developed by the Company which is included in “Revenues” in the Consolidated Statements of Operations for the years ended December 31, 20172019, 20162018 and 20152017, respectively.
Summarized unaudited financial information for equity investments is as follows:
 2019 2018 2017
Statement of Operations     
Revenues$424.3
 $413.0
 $350.3
Gross profit$127.4
 $126.9
 $111.9
Income from continuing operations$37.4
 $36.7
 $127.2
Net income$37.4
 $36.7
 $127.2
Balance Sheet     
Current assets$123.7
 $130.9
  
Non-current assets$1,665.2
 $1,609.7
  
Current liabilities$133.6
 $123.5
  
Non-current liabilities$1,454.3
 $1,431.2
  
 2017 2016 2015
Statement of Operations     
Revenues$350.3
 $326.7
 $315.0
Gross profit$111.9
 $103.4
 $98.7
Income from continuing operations$127.2
 $25.5
 $23.1
Net income$127.2
 $25.5
 $23.1
Balance Sheet     
Current assets$125.3
 $115.5
  
Non-current assets$1,484.0
 $1,272.2
  
Current liabilities$120.7
 $117.2
  
Non-current liabilities$1,241.6
 $1,138.0
  

The results of HYGFS for 2017, which are included in the table above, include a provisional benefit of $99.2 million related to the Tax Reform Act, of which the Company has recognized $19.8 million under the equity method of accounting for HYGFS.
At December 31, 2017 and 2016, the investment in HYGFS was $35.2 million and $13.8 million, respectively, the investment in SN was $36.8 million and $31.6 million, respectively, and Bolzoni's investmentThe Company's equity investments in unconsolidated affiliates was $0.5 million and $0.5 million, respectively. The investments are included in “Investment in Unconsolidated Affiliates” in the Consolidated Balance Sheets. Sheets as follows:
 December 31, 2019 December 31, 2018
HYGFS$22.8
 $20.6
SN43.9
 41.3
Bolzoni0.3
 0.5
Dividends received from unconsolidated affiliates for the year ended December 31, are summarized below:
 2019 2018 2017
HYGFS$4.1
 $20.1
 $2.4
SN1.0
 2.1
 0.4
 $5.1
 $22.2
 $2.8
The Company received dividends of $2.4 million, $4.8has an approximately 19% ownership interest through common and redeemable preferred shares in a third party, OneH2, Inc. ("OneH2"). The Company's investment was $10.6 million and $2.3$9.1 million from HYGFS in 2017, 2016as of December 31, 2019 and 2015,December 31, 2018, respectively. The Company received dividendsrecorded $1.3 million of $0.4 million, $0.3 million and $0.2 million from SNaccrued dividend income related to this investment in 2017, 2016 and 2015, respectively.2019.


During 2017, theThe Company acquiredhas an equity investment in a third party for $5.6 million. This investment is accounted for as an available-for-sale security and valued using a quoted market price in an active market, or Level 1 in the fair value hierarchy. The Company's investment as of December 31, 20172019 and December 31, 2018 was $9.4$2.4 million which includes a $3.3and $4.1 million, unrealizedrespectively. Any gain ($2.8 million net of tax) that was recorded in OCIor loss on the investment is included on the line "Other" in the Consolidated Balance Sheet.

NOTE 19—Acquisitions

On April 1, 2016, the Company's indirect wholly owned subsidiary, Hyster-Yale Capital Holding Italy S.r.l. (“HY Italy”), acquired 100%"Other (income) expense" section of the outstanding sharesConsolidated Statements of Penta Holding S.p.A. ("Penta") from its shareholdersOperations for an aggregatethe years ended December 31, as follows:
cash purchase price of €53.5 million (approximately $60.9 million as of April 1, 2016), which includes the value of the majority stake (approximately 50.5%) of Bolzoni owned by Penta, as well as Penta's other assets and other liabilities.
 2019 2018
Loss on equity investment$(1.6) $(5.1)



Subsequent to the completion of the acquisition of Penta, HY Italy, in compliance with Italian law and CONSOB regulations, commenced the steps to launch a mandatory tender offer in Italy for all of the remaining outstanding shares of Bolzoni, with the intention to achieve the delisting of Bolzoni following completion of the mandatory tender offer and the processes related thereto.

During the second and third quarters of 2016, HY Italy acquired the remaining outstanding interest in Bolzoni for €55.4 million or approximately $62.2 million, which was funded using cash on hand and borrowings under the Facility. On July 6, 2016, Bolzoni was delisted from the Italian stock exchange.



NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)


NOTE 20—Restructuring

In 2019, as part of a plan to expand Bolzoni's capabilities in the United States, Bolzoni's North America attachment manufacturing was moved into HYG's Sulligent, Alabama manufacturing facility. As a result, effective January 1, 2019, the Sulligent facility became a Bolzoni facility.

As a result of this restructuring, Bolzoni recognized charges totaling approximately $2.5 million during the year ended December 31, 2019. During 2019, the Company incurred $0.4 million related to severance, which was recorded on the line "Selling, general and administrative expenses," and $2.1 million related to plant rearrangement and moving costs, which was recorded in "Cost of sales." Severance payments of $0.4 million were made during 2019. Cash payments related to this restructuring plan were completed in 2019.

NOTE 21—Other Items

Effective July 6, 2018, the U.S. Trade Representative imposed additional duties on goods imported from China as part of the action in the Section 301 investigation of China’s acts, policies and practices related to technology transfer, intellectual property and innovation. On April 18, 2019, the U.S. Trade Representative posted a notice announcing its determination to grant exclusion requests for additional duties on certain goods from China. The acquisition of Bolzoni added a broader range of forklift truck attachments, forks and lift tablesexclusions will apply retroactively to the Company's suiteJuly 6, 2018 effective date and will extend for one year after the notice of productsexclusions, or April 2020.

Certain components of fork lift trucks, including counterweights
and provides an important platform for additional growth. The acquisition of Bolzoni has been accounted for using the acquisition method of accounting, which requires, among other things, the assets acquired and liabilities assumed be recognized at their respective fair values as of the acquisition date. The process of estimating the fair values of intangible assets and certain tangible assets and assumed liabilities requires the use of judgment in determining the appropriate assumptions and estimates.

The following table summarizes the final allocation of the fair values of the assets acquired and the liabilities assumed of Bolzoni as of April 1, 2016:
Acquired Assets and Liabilities Fair Value
Cash $8.0
Accounts receivable 34.0
Inventories 31.5
Property, plant and equipment 43.3
Intangible Assets 54.8
Other assets 0.5
Total assets acquired $172.1
Accounts payable 32.7
Total debt 44.3
Long-term deferred tax liabilities 12.5
Other liabilities 8.0
Total liabilities assumed $97.5
Noncontrolling interest 5.7
Net assets acquired $68.9
Initial purchase price $60.9
Interest acquired in mandatory tender offer $63.2
Goodwill $55.2
Acquired Intangible Assets Fair Value Weighted-Average Useful Lives (Years) Valuation Method
Customer relationships $22.1
 13 Excess Earnings
Trademarks 17.1
 Indefinite Relief from Royalty
Engineering drawings 12.5
 10 Reproduction Cost
Patents 2.1
 10 Relief from Royalty
Non-compete agreement 1.0
 3 Lost Profit
Total $54.8
    

The fair value of accounts receivable acquired was $34.0 million with the gross contractual amount being $34.0 million. At the time of the acquisition, the Company expected to collect all accounts receivable. The $55.2 million of goodwill was assigned to the Bolzoni segment. The goodwill recognized is attributable primarily to expected synergies and the assembled workforce of Bolzoni. None of the goodwill is expected to be deductible for income tax purposes. The results of Bolzoni’s operations have been includedforks, were listed in the consolidated financial statements since the acquisition date and are reflected in the Bolzoni segment. Pro forma information has not been presentednotice as it would not be materially different from historical reported results of operations.

In April 2016, the Company entered into a non-cash working capital transaction to acquire a telematics installation and distribution business with intangibles of approximately $8.1 million. The results of operations of this acquired business have been included in the America's segment since the date of acquisition and are not material to the Company's results of operations, financial position or cash flows.

On December 6, 2017, the Company's indirect wholly owned subsidiary, Hyster-Yale Acquisition Holding Ltd., entered into an Equity Transfer Agreement (“ETA”) with KNSN Pipe & Pile Company Limited (“KNSN”), pursuant to which Acquisition Co.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
(Tabular Amounts in Millions, Except Per Share and Percentage Data)

will purchase 75% of the equity interest of Zhejiang Maximal Forklift Co., Ltd. (“Maximal”) from KNSN for an aggregate purchase price of $90.0 million. After the closing under the ETA, which the Company currently anticipates to be in the second quarter of 2018, the remaining 25% of the equity interest of Maximal will be owned by the current senior management of Maximal, through Y-C Hong Kong Holding Company Limited (“HK Holding Co.”). Maximal is a privately held manufacturer of utility and standard lift trucks and specialized materials handling equipment founded in 2006 in the Hangzhou, Zhejiang Province of China.
Under the terms of the ETA, upon the closing, the Company will pay $81.0 million to a jointly-controlled bank account under the name of KNSN, and KNSN is only allowed to use such amount to repay intercompany indebtedness owed by KNSN to Maximal and to remove existing related-party guarantees provided by Maximal. Any balance amount remaining after fulfilling the specified purposes will belong to KNSN. In addition, upon the closing, the Company will pay $9.0 million to an escrow account, which will be released to KNSN in two installments. The first installment of $2.7 million will be released on the second anniversary of the closing and the second installment of $6.3 million will be released on the third anniversary of the closing subject to a number of conditions. The closing of the transaction is subject to customary closing conditions and required regulatory approvals. KNSN is obligated to indemnify the Company from and against any breach of representations and warranties and any liabilities and losses associated with the pre-closing operations of Maximal. Either party has a right to terminate the transaction if the closing conditions (other than governmental approvals) have not been satisfied within nine months of the signing, with no penalties on either party.

In addition, on December 6, 2017, the Company signed an incentive agreement with Mr. Jin Hong Lu, a key member of senior management of Maximal and the majority shareholder of KNSN. Pursuant to this agreement, the Company will pay $10.0 million to Mr. Lu by the third anniversary of the closing under the ETA, provided that Mr. Lu, his immediate family members and any affiliates fully comply with the non-competition, conflict of interest, non-solicitation, and compliance covenants set forth in the agreement.

On December 6, 2017, pursuant to the terms of the ETA, Mr. Lu signed and issued a Guarantee and Undertaking Letterexclusions for the benefit of the Company, guaranteeing KNSN’s performance of all terms under the ETA. In the case of any breach of the ETA by KNSN, Mr. Lu shall be liable and shall indemnify the Company against any losses arising from such breach in accordance with the ETA and applicable laws.

additional duties. The Company recognized $2.5 million and $6.6$11.8 million of acquisition-related costs during 2017 and 2016, respectively,retroactive tariff recoveries in 2019, which are included in the Americas segment. These costs areis included in the line “Selling, general and administrative expenses”"Cost of sales" in the Consolidated StatementStatements of Operations.



Table of Contents

SCHEDULE II—VALUATION AND QUALIFYING ACCOUNTS
HYSTER-YALE MATERIALS HANDLING, INC. AND SUBSIDIARIES
YEAR ENDED DECEMBER 31, 20172019, 20162018 AND 20152017
    Additions      
Description Balance at Beginning of Period 
Charged to
Costs and
Expenses
 
Charged to
Other Accounts
— Describe (A)
 
Deductions
— Describe
 
Balance at
End of
Period
 (In millions)
2019            
Reserves deducted from asset accounts:            
Allowance for doubtful accounts (B) $9.7
 $1.2
 $(1.2) $
 (C)  $9.7
2018            
Reserves deducted from asset accounts:            
Allowance for doubtful accounts (B) $8.7
 $1.9
 $(0.9) $
 (C)  $9.7
2017            
Reserves deducted from asset accounts:            
Allowance for doubtful accounts (B) $14.9
 $0.2
 $1.1
 $7.5
 (C)  $8.7
    Additions      
Description Balance at Beginning of Period 
Charged to
Costs and
Expenses
 
Charged to
Other Accounts
— Describe (A)
 
Deductions
— Describe
 
Balance at
End of
Period
 (In millions)
2017            
Reserves deducted from asset accounts:            
Allowance for doubtful accounts (B) $14.9
 $0.2
 $1.1
 $7.5
 (C)  $8.7
2016            
Reserves deducted from asset accounts:            
Allowance for doubtful accounts (B) $12.8
 $6.3
 $(2.7) $1.5
 (C)  $14.9
2015            
Reserves deducted from asset accounts:            
Allowance for doubtful accounts (B) $16.3
 $4.9
 $(2.1) $6.3
 (C)  $12.8

(A)Foreign currency translation adjustments and other.
(B)
Includes allowance of receivables classified as long-term of $4.1 million, $4.3 million and $5.0 million $4.6 millionin 2019, 2018 and $4.5 million in 2017, 2016 and 2015, respectively.
(C)Write-offs, net of recoveries.


F-45F-47