UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

For the fiscal year ended December 31, 20122013

or

For the transition period fromto

Commission File Number: 001-34927

Compass Diversified Holdings

(Exact name of registrant as specified in its charter)

Commission File Number: 001-34926

Compass Group Diversified Holdings LLC

(Exact name of registrant as specified in its charter)

(203) 221-1703

(Registrants’ telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12 (g) of the Act: None

Indicate by check mark if the registrants are collectively a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  xþ

Indicate by check mark if the registrants are collectively not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  xþ

Indicate by check mark whether the registrants (1) have filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrants were required to file such reports), and (2) have been subject to such filing requirements for the past 90 days.    Yes  xþ    No  ¨

Indicate by check mark whether the registrants have submitted electronically and posted on their corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  xþ    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrants’ knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ¨

Indicate by check mark whether the registrants are collectively a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark whether the registrants are collectively a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  xþ

The aggregate market value of the outstanding shares of trust stock held by non-affiliates of Compass Diversified Holdings at June 30, 20122013 was $550,707,370$689,963,270 based on the closing price on the New York Stock Exchange on that date. For purposes of the foregoing calculation only, all directors and officers of the registrant have been deemed affiliates.

There were 48,300,000 shares of trust stock without par value outstanding at February 25, 2013.2014.

Documents Incorporated by Reference

Certain information in the registrant’s definitive proxy statement to be filed with the Commission relating to the registrant’s 20122014 Annual Meeting of Stockholders is incorporated by reference into Part III.

Table of Contents

NOTE TO READER

In reading this Annual Report on Form 10-K, references to:

Statement Regarding Forward-Looking Disclosure

This Annual Report on Form 10-K, including the sections entitled “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business,” contains forward-looking statements. We may, in some cases, use words such as “project,” “predict,” “believe,” “anticipate,” “plan,” “expect,” “estimate,” “intend,” “should,” “would,” “could,” “potentially,” or “may” or other words that convey uncertainty of future events or outcomes to identify these forward-looking statements. Forward-looking statements in this Annual Report on Form 10-K are subject to a number of risks and uncertainties, some of which are beyond our control, including, among other things:

including, among other things:

Our actual results, performance, prospects or opportunities could differ materially from those expressed in or implied by the forward-looking statements. A description of some of the risks that could cause our actual results to differ appears under the section “Risk Factors”. Additional risks of which we are not currently aware or which we currently deem immaterial could also cause our actual results to differ.

In light of these risks, uncertainties and assumptions, you should not place undue reliance on any forward-looking statements. The forward-looking events discussed in this Annual Report on Form 10-K may not occur. These forward-looking statements are made as of the date of this Annual Report. We undertake no obligation to publicly update or revise any forward-looking statements to reflect subsequent events or circumstances, whether as a result of new information, future events or otherwise, except as required by law.

PART I

ITEM 1. BUSINESS

Compass Diversified Holdings, a Delaware statutory trust (“Holdings”, or the “Trust”), was incorporated in Delaware on November 18, 2005. Compass Group Diversified Holdings, LLC, a Delaware limited liability Company (the “Company”), was also formed on November 18, 2005. The Trust and the Company (collectively “CODI”) were formed to acquire and manage a group of small and middle-market businesses headquartered in North America. The Trust is the sole owner of 100% of the Trust Interests, as defined in our LLC Agreement, of the Company. Pursuant to the LLC Agreement, the Trust owns an identical number of Trust Interests in the Company as exist for the number of outstanding shares of the Trust. Accordingly, our shareholders are treated as beneficial owners of Trust Interests in the Company and, as such, are subject to tax under partnership income tax provisions.

The Company is the operating entity with a board of directors whose corporate governance responsibilities are similar to that of a Delaware corporation. The Company’s board of directors oversees the management of the Company and our businesses and the performance of Compass Group Management LLC (“CGM” or our “Manager”). Our Manager is the sole ownerCertain members of our Manager receive a profit allocation as owners of 53.6% of the Allocation Interests in us, as defined in our LLC Agreement.

Overview

We acquire controlling interests in and actively manage businesses that we believe (i) operate in industries with long-term macroeconomic growth opportunities, and that(ii) have positive and stable cash flows, (iii) face minimal threats of technological or competitive obsolescence and, (iv) have strong management teams largely in place.

Our unique public structure provides investors with an opportunity to participate in the ownership and growth of companies which have historically been owned by private equity firms, wealthy individuals or families. Through the acquisition of a diversified group of businesses with these characteristics, we alsobelieve we offer investors an opportunity to diversify their own portfolio risk while participating in the ongoing cash flows of those businesses through the receipt of quarterly distributions.

Our disciplined approach to our target market provides opportunities to methodically purchase attractive businesses at values that are accretive to our shareholders. For sellers of businesses, our unique financial structure allows us to acquire businesses efficiently with little or no third party financing contingencies and, following acquisition, to provide our businesses with substantial access to growth capital.

We believe that private company operators and corporate parents looking to sell their businessesbusiness units may consider us an attractive purchaser because of our ability to:

In particular, we believe that our outlook on length of ownership and active management on our part may alleviate the concern that many private company operators and parent companies may have with regard to their businesses going through multiple sale processes in a short period of time. We believe this outlook reduces both reduces the risk that businesses may be sold at unfavorable points in the overall market cycle and enhances our ability to develop a comprehensive strategy to grow the earnings and cash flows of each of our businesses, which we expect will better enable us to meet our long-term objective of payingcontinuing to pay distributions to our shareholders andwhile increasing shareholder value.

Finally, we have foundit has been our experience, that our ability to acquire businesses without the cumbersome delays and conditions typical of third party transactional financing can be veryis appealing to sellers of businesses who are interested in confidentiality and certainty to close.

We believe our management team’s strong relationships with industry executives, accountants, attorneys, business brokers, commercial and investment bankers, and other potential sources of acquisition opportunities offer us substantial opportunities to assess small to middle market businesses that may be available for acquisition. In addition, the flexibility, creativity, experience and expertise of our management team in structuring transactions allows us to consider non-traditional and complex transactions tailored to fit a specific acquisition target.

In terms of the businesses in which we have a controlling interest as of December 31, 2012,2013, we believe that these businesses have strong management teams, operate in strong markets with defensible market niches and maintain long standing customer relationships. We believe that the strength of this model, which provides for significant industry, customer and geographic diversity, has become even more apparent in the currentrecent challenging economic environment.

20122013 Highlights

Acquisition of Arnold Magnetics

On March 5, 2012, we purchased a 96.6% controlling interest (on a primary and fully diluted basis) in Arnold Magnetics, with headquarters in Rochester, NY. Arnold Magnetics has an operating history of more than 100 years and is a leading global manufacturer of engineered magnetic solutions for a wide range of specialty applications and end-markets, including energy, medical, aerospace and defense, consumer electronics, general industrial and automotive. From its nine manufacturing facilities located in the United States, the United Kingdom, Switzerland and China, the company produces high performance permanent magnets, flexible magnets and precision foil products that are mission critical in motors, generators, sensors and other systems and components. Based on its long-term relationships, Arnold Magnetics has built a diverse and blue-chip customer base totaling more than 2,000 clients worldwide.

The purchase price, including proceeds from non-controlling interests, was approximately $130.5 million (excluding acquisition-related costs) and was based on a total enterprise value of $124.2 million and included approximately $6.3 million in cash and working capital. Acquisition related costs were approximately $4.8 million. We funded the acquisition through available cash on hand and a draw of $25 million on our Revolving Credit Facility. Arnold’s management and certain other investors invested in the transaction alongside us, collectively representing approximately 3.4% in initial non-controlling interest on a primary and fully diluted basis. CGM acted as an advisor to us in the transaction and received fees and expense payments totaling approximately $1.2 million.

Preferred Stock Redemption

On March 6, 2012, we redeemed CamelBak’s 11% convertible preferred stock for $45.3 million plus accrued dividends of $2.7 million, from an affiliate of CGI Magyar Holdings LLC, CODI’s largest shareholder. The redemption was funded with available cash on hand.

Debt Re-pricing

On April 2, 2012,3, 2013, we exercised ouran option for an incremental term loan in the amount of $30 million. The incremental term loan was issued at 99% of par value and increased the term loans outstanding under the Credit Facility from approximately $224.4 million to approximately $254.4 million. In addition, in connection with the option we reduced the margin onincrease our Term Loan Facility LIBOR Loans from 6.00% to 5.00%, Base Rate Loans from 5.00% to 4.00% and reduced the LIBOR floor from 1.50% to 1.25%. We paid an amendment fee of approximately $2.2 million, and incurred additional fees and expenses of approximately $0.6by $30 million. Net proceeds from this incremental term loan were used to reduce outstanding loans on our Revolving Credit Facility. In connection with the increase, we amended the pricing of our Credit Facility so that borrowings under the Term Loan Facility now bear interest at LIBOR plus 4.0% with a floor of 1.0% and borrowings under the Revolving Credit Facility.Facility now bear interest at LIBOR plus 2.5% - 3.5%. In addition, the amendment provided for a reduction in commitment fees on revolving loan availability to 0.75% and extended the maturity date on our Revolving Credit Facility to April 2017.

On August 6, 2013, we exercised an option under our Credit Facility to expand our Revolving Credit Facility by $30 million, increasing the total amount available under the facility to $320 million subject to borrowing base restrictions. We intend to utilize the incremental borrowing capacity under the Revolving Credit Facility to fund future growth opportunities and provide for working capital and general corporate purposes.

Sale of HALOFOX IPO

On May 1, 2012, weAugust 13, 2013 Fox Factory Holding Corp. (“FOX”) completed an initial public offering of its common stock pursuant to a registration statement on Form S-1 (the “FOX IPO”). In the FOX IPO, FOX sold all2,857,143 shares and certain of its shareholders sold 7,000,000 shares (including 5,800,238 shares held by CODI) at an initial offering price of $15.00 per share. FOX trades on The NASDAQ Stock Market LLC (the “NASDAQ”) stock market under the issued and outstanding capital stock of HALO to Candlelight Investment Holdings, Inc. The total enterprise value received for HALO was $76.5 million.

At the closing, weticker “FOXF”. We received approximately $66.0$80.9 million in cash in respect of our debt and equity interests in HALO and for the payment of accrued interest and fees after payments to non-controlling shareholders and payment of all transaction expenses. We received an additional approximately $0.8 million in 2012 that were held in escrow. The net proceeds were used to repay outstanding debt under our Revolving Credit Facility. We recorded a loss onfrom the sale of HALOour FOX shares. FOX used a portion of $0.5 million.their net proceeds received from the sale of their shares as well as proceeds from a new credit facility with a third party lender to repay $61.5 million in outstanding indebtedness to us under their credit facility.

As a result of the FOX IPO, we currently own approximately 53.9% of the outstanding shares of FOX common stock.

20122013 Distributions

For the 20122013 fiscal year we declared and paid distributions to our shareholders totaling $1.44 per share.

The following is a brief summary of the businesses in which we own a controlling interest at December 31, 2012:2013:

Branded Products Businesses

CamelBak

CamelBak Products LLC (“CamelBak”), headquartered in Petaluma, California, is a diversified hydration and personal protection platform offering products for outdoor, recreation and military applications. CamelBak offers a broad range of recreational / military hydration packs, reusable water bottles, specialized military gloves and performance accessories. We made loans to, and purchased a controlling interest in, CamelBak on August 24, 2011 for approximately $211.6 million. We currently own 89.9% of the outstanding stock of CamelBak on a primary basis and 79.7% on a fully diluted basis.

Ergobaby

Ergobaby Carrier, Inc. (“Ergobaby”), headquartered in Los Angeles, California, is a premier designer, manufacturer and distributor of wearable baby carriers and related baby wearing products, as well as stroller travel systems and accessories. Ergobaby’s reputation for product innovation, reliability and safety has led to numerous awards and accolades from consumers, industry experts and publications. Ergobaby offers a broad range of wearable baby carriers, stroller travel systems and related products that are sold through more than 450 retailers and web shops in the United States and internationally. We made loans to, and purchased a controlling interest in, Ergobaby on September 16, 2010 for approximately $85.2 million. We currently own 81.0% of the outstanding stock of Ergobaby on a primary basis and 75.0% on a fully diluted basis.

FOX

FOX headquartered in Scotts Valley, California, is a designer, manufacturer and marketer of high-performance suspension products used primarily on mountain bikes, side-by-side vehicles, on-road vehicles with off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, or ATVs, snowmobiles, specialty vehicles and applications, and motorcycles. FOX’s products offer innovative design, performance, durability and reliability that enhance ride dynamics by improving performance and control. The FOX brand is associated with high-performance and technologically advanced products. We made loans to and purchased a controlling interest in FOX on January 4, 2008, for approximately $80.4 million. We currently own 53.9% of the outstanding common stock on a primary basis and 49.8% on a fully diluted basis.

Liberty Safe

Liberty Safe and Security Products, Inc. (“Liberty Safe” or “Liberty”), headquartered in Payson, Utah, is a designer, manufacturer and marketer of premium home and gun safes in North America. From it’s over 200,000 square foot manufacturing facility, Liberty produces a wide range of home and gun safe models in a broad assortment of sizes, features and styles. We made loans to and purchased a controlling interest in Liberty Safe on March 31, 2010 for approximately $70.2 million. We currently own 96.2% of the outstanding stock of Liberty Safe on a primary basis and 84.8% on a fully diluted basis.

Niche Industrial Businesses

Advanced Circuits

Compass AC Holdings, Inc. (“Advanced Circuits” or “ACI”), headquartered in Aurora, Colorado, is a provider of prototype, quick-turn and volume production rigid printed circuit boards, or “PCBs”, throughout the United States. PCBs are a vital component of virtually all electronic products. The prototype and quick-turn portions of the PCB industry are characterized by customers requiring high levels of responsiveness, technical support and timely delivery. We made loans to and purchased a controlling interest in Advanced Circuits, on May 16, 2006, for approximately $81.0 million. We currently own 69.4% of the outstanding stock of Advanced Circuits on a primary and fully diluted basis.

American Furniture

AFM Holding Corporation (“American Furniture” or “AFM”) headquartered in Ecru, Mississippi, is a leader in the manufacturing of low-cost upholstered stationary and motion furniture, including sofas, loveseats, sectionals, recliners and complementary products to the promotional furniture market. We made loans to and purchased a controlling interest in AFM on August 31, 2007 for approximately $97.0 million. We currently own approximately 99.9% of AFM’s outstanding stock on a primary basis and fully diluted basis.

Arnold

AMT Acquisition Corporation (“Arnold” or “Arnold Magnetics”), headquartered in Rochester, NY, with nine additional facilities worldwide, is a manufacturer of engineered, application specific permanent magnets. Arnold Magnetics products are used in applications such as general industrial, reprographic systems, aerospace and defense, advertising and promotional, consumer and appliance, energy, automotive and medical technology. Arnold Magnetics is the largest U.S. manufacturer of engineered magnets as well as only one of two domestic producers to design, engineer and manufacture rare earth magnetic solutions. We made loans to, and purchased a controlling interest in Arnold on March 5, 2012 for approximately $122.4$128.8 million. We currently own 96.7% of the outstanding stock of Arnold on a primary basis and 87.6% on a fully diluted basis.

CamelBak

CamelBak Products LLC (“CamelBak”), headquartered in Petaluma, California, is a diversified hydration and personal protection platform offering products for outdoor, recreation and military applications. CamelBak offers a broad range of recreational / military hydration packs, reusable water bottles, specialized military gloves and performance accessories. We made loans to, and purchased a controlling interest in, CamelBak on August 24, 2011 for approximately $211.6 million. We currently own 89.9% of the outstanding stock of CamelBak on a primary basis and 79.7% on a fully diluted basis.

Ergobaby

Ergobaby Carrier, Inc. (“Ergobaby”), headquartered in Los Angeles, California, is a premier designer, manufacturer and distributor of baby wearing products, stroller travel systems and accessories. Ergobaby’s reputation for product innovation, reliability and safety has led to numerous awards and accolades from consumer surveys and publications. Ergobaby offers a broad range of wearable baby carriers, stroller travel systems and related products that are sold through more than 600 retailers and web shops in the United States and internationally. We made loans to, and purchased a controlling interest in, Ergobaby on September 16, 2010 for approximately $85.2 million. We currently own 81.1% of the outstanding stock of Ergobaby on a primary basis and 77.1%87.2% on a fully diluted basis.

Fox

Fox Factory Holding Corp. (“Fox”) headquartered in Scotts Valley, California, is a designer, manufacturer and marketer of high end suspension products for mountain bikes and power sports, which includes; all-terrain vehicles, snowmobiles and other off-road vehicles. Fox acts both as a tier one supplier to leading action sports original equipment manufacturers (“OEM”) and provides after-market products to retailers and distributors (“Aftermarket”). Fox’s products are recognized as the industry’s performance leaders by retailers and end-users alike. We made loans to and purchased a controlling interest in Fox on January 4, 2008, for approximately $80.4 million. We currently own 75.8% of the outstanding common stock on a primary basis and 70.6% on a fully diluted basis.

Liberty Safe

Liberty Safe and Security Products, Inc. (“Liberty Safe” or “Liberty”), headquartered in Payson, Utah, is a designer, manufacturer and marketer of premium home and gun safes in North America. From it’s over 200,000 square foot manufacturing facility, Liberty produces a wide range of home and gun safe models in a broad assortment of sizes, features and styles. We made loans to and purchased a controlling interest in Liberty Safe on March 31, 2010 for approximately $70.2 million. We currently own 96.2% of the outstanding stock of Liberty Safe on a primary basis and 86.7% on a fully diluted basis.

Tridien

Anodyne Medical Device, Inc. (“Anodyne”, which was rebranded as “Tridien” in September 2010) headquartered in Coral Springs, Florida, is a leading designer and manufacturer of powered and non-powered medical therapeutic support services and patient positioning devices serving the acute care, long-term care and home health care markets. Tridien is one of the nation’s leading designers and manufacturers of specialty therapeutic support surfaces and is able to manufacture products in multiple locations to better serve a national customer base. We made loans to and purchased a controlling interest in Tridien from CGI on August 1, 2006 for approximately $31.0 million. We currently own 81.3% of the outstanding capital stock on a primary basis and 67.4%66.5% on a fully diluted basis.

Our businesses also represent our operating segments. See See—“ – Our Businesses” and “Note EF – Operating“Operating Segment Data” to our Consolidated Financial Statements for further discussion of our businesses as our operating segments.

Tax Reporting

Information returns will be filed by the Trust and the Company with the IRS, as required, with respect to income, gain, loss, deduction and other items derived from the company’sCompany’s activities. The Company has and will file a partnership return with the IRS and intends to issue a Schedule K-1 to the trustee. The trustee intends to provide information to each holder of shares using a monthly convention as the calculation period. For 2012,2013, and future years, the Trust has, and will continue to file a Form 1065 and issue Schedule K-1 to shareholders. For 2012,2013, we delivered the Schedule K-1 to shareholders within the same time frame as we delivered the schedule to shareholders for the 20112012 and 20102011 taxable year. The relevant and necessary information for tax purposes is readily available electronically through our website. Each holder will be deemed to have consented to provide relevant information, and if the shares are held through a broker or other nominee, to allow such broker or other nominee to provide such information as is reasonably requested by us for purposes of complying with our tax reporting obligations.

WHERE YOU CAN FIND ADDITIONAL INFORMATION

We have filed with the SEC Forms S-1 and S-3 under the Securities Act, and Forms 10-Q, 10-K, and 8-K under the Exchange Act, which include exhibits, schedules and amendments. In addition, copies of such reports are available free of charge that can be accessed indirectly through our websitehttp://www.compassdiversifiedholdings.com and are available as soon as reasonably practicable after such documents are electronically filed or furnished with the SEC.

Our Manager

Our Manager, CGM, has been engaged to manage the day-to-day operations and affairs of the Company and to execute our strategy, as discussed below. Our management team has worked together since 1998. Collectively, our management team has extensive experience in acquiring and managing small and middle market businesses. We believe our Manager is unique in the marketplace in terms of the success and experience of its employees in acquiring and managing diverse businesses of the size and general nature of our businesses. We believe this experience will provide us with an advantage in executing our overall strategy. Our management team devotes a majority of its time to the affairs of the Company.

We have entered into a management services agreement, (the “Management Services Agreement” or “MSA”) pursuant to which our Manager manages the day-to-day operations and affairs of the Company and oversees the management and operations of our businesses. We pay our Manager a quarterly management fee for the services it performs on our behalf. In addition, certain members of our Manager receivesreceive a profit allocation with respect to its Allocation Interests in us. All of the Allocation Interests in us are owned by Sostratus LLC. See Part III, Item 13 “Certain Relationships and Related Transactions” for further descriptions of the management fees and profit allocation to be paid to our Manager. In consideration of our Manager’s acquisition of the Allocation Interests, we entered into a Supplemental Put agreement with our Manager pursuant to which our Manager has the right to cause us to purchase its Allocation Interests upon termination of the Management Services Agreement. Our Manager owns 100% of the Allocation Interests of the Company, for which it paid $0.1 million.allocations.

The Company’s Chief Executive Officer and Chief Financial Officer are employees of our Manager and have been seconded to us. Neither the Trust nor the Company has any other employees. Although our Chief Executive Officer and Chief Financial Officer are employees of our Manager, they report directly to the Company’s board of directors. The management fee paid to our Manager covers all expenses related to the services performed by our Manager, including the compensation of our Chief Executive Officer and other personnel providing services to us. The Company reimburses our Manager for the salary and related costs and expenses of our Chief Financial Officer and his staff, who dedicate substantially all of their time to the affairs of the Company.

See Part III, Item 13, “Certain Relationships and Related Party Transactions and Director Independence”.Independence.”

Market Opportunity

We acquire and actively manage small and middle market businesses. We characterize small to middle market businesses as those that generate annual cash flows of up to $60 million. We believe that the merger and acquisition market for small to middle market businesses is highly fragmented and provides opportunities to purchase businesses at attractive prices. We believe that the following factors contribute to lower acquisition multiples for small and middle market businesses:

We believe thatFrequently opportunities exist to augment existing management at such businesses and improve the performance of these businesses upon their acquisition. In the past, our management team has acquired businesses that were owned by entrepreneurs or large corporate parents. In these cases, our management team has frequently found that there have been opportunities to further build upon the management teams of acquired businesses beyond those in existencethat existed at the time of acquisition. In addition, our management team has frequently found that financial reporting and management information systems of acquired businesses may be improved, both of which can lead to improvements in earnings and cash flow. Finally, because these businesses tend to be too small to have their own corporate development efforts, we believe opportunities frequently exist to assist these businesses as they pursue organic or external growth strategies that were often not pursued by their previous owners.

Our Strategy

We have two primary strategies that we use in order to provide distributions to our shareholders and increase shareholder value. First, we focus on growing the earnings and cash flow from our acquired businesses. We believe that the scale and scope of our businesses give us a diverse base of cash flow upon which to further build. Second, we identify, perform due diligence on, negotiate and consummate additional platform acquisitions of small to middle market businesses in attractive industry sectors in accordance with acquisition criteria established by the board of directors

Management Strategy

Our management strategy involves the proactive financial and operational management of the businesses we own in order to increase cash flow, pay distributions to our shareholders and increase shareholder value. Our Manager oversees and supports the management teams of each of our businesses by, among other things:

Specifically, while our businesses have different growth opportunities and potential rates of growth, we expect our Manager to work with the management teams of each of our businesses to increase the value of, and cash generated by, each business through various initiatives, including:

In terms of the difficult economic environment we are currently facing, we and each of our subsidiary management teams have been, and will continue to be, intensely focused on performance and cost control measures through this economic cycle.

Our businesses typically acquire and integrate complementary businesses. We believe that complementary add-on acquisitions will improve our overall financial and operational performance by allowing us to:

We incur third party debt financing almost entirely at the Company level, which we use, in combination with our equity capital, to provide debt financing to each of our businesses and to acquire additional businessesbusinesses. FOX maintains its own credit facility. Refer to “Liquidity and Capital Resources” “FOX Credit Facility.” We believe this financing structure is beneficial to the financial and operational activities of each of our businesses by aligning our interests as both equity holders of, and lenders to, our businesses, in a manner that we believe is more efficient than each of our businesses borrowing from third-party lenders.

Acquisition Strategy

Our acquisition strategy involves the acquisition of businesses that we expect to produce stable and growing earnings and cash flow. In this respect, we expect to make acquisitions in industries other than those in which our businesses currently operate if we believe an acquisition presents an attractive opportunity. We believe that attractive opportunities will continue to present themselves, as private sector owners seek to monetize their interests in longstanding and privately-held businesses and large corporate parents seek to dispose of their “non-core” operations.

Our ideal acquisition candidate has the following characteristics:

We benefit from our Manager’s ability to identify potential diverse acquisition opportunities in a variety of industries. In addition, we rely upon our management team’s experience and expertise in researching and valuing prospective target businesses, as well as negotiating the ultimate acquisition of such target businesses. In particular, because there may be a lack of information available about these target businesses, which may make it more difficult to understand or appropriately value such target businesses, on our behalf, our Manager:

The process of acquiring new businesses is both time-consuming and complex. Our management team historically has taken from two to twenty-four months to perform due diligence, negotiate and close acquisitions. Although our management team is always at various stages of evaluating several transactions at any given time, there may be periods of time during which our management team does not recommend any new acquisitions to us. Even if an acquisition is recommended by our management team, our board of director’s may not approve it.

A component of our acquisition financing strategy that we utilize in acquiring the businesses we own and manage is to provide both equity capital and debt capital, raised at the parent company level largely through our existing credit facility, to close acquisitions. We believe, and it has been our experience, that having the ability to finance our acquisitions with capital resources raised by us, rather than negotiating separate third party financing, provides us with an advantage in successfully acquiring attractive businesses by minimizing delay and closing conditions that are often related to acquisition-specific financings. In addition, our strategy of providing this intercompany debt financing within the capital structure of the businesses we acquire and manage allows us the ability to distribute cash to the parent company through monthly interest payments and amortization of principle on these intercompany loans.

Upon acquisition of a new business, we rely on our manager’sManager’s experience and expertise to work efficiently and effectively with the management of the new business to jointly develop and execute a successful business plan.

We believe due to our financing structure, in which both equity and debt capital are raised at the Company level, allowingallows us to acquire businesses without transaction specific financing and is conducive to our ability to consummate transactions that may be attractive in both the short- and long-term.

In addition to acquiring businesses, we sell those businesses that we own from time to time when attractive opportunities arise that outweigh the value that we believe we will be able to bring such businesses consistent with our long-term investment strategy. As such, our decision to sell a business is based on our belief that doing so will increase shareholder value to a greater extent than through our continued ownership of that business. Upon the sale of a business, we may use the proceeds to retire debt or retain proceeds for acquisitions or general corporate purposes. We do not expect to make special distributions at the time of a sale of one of our businesses; instead, we expect to pay shareholder distributions over time solely through the earnings and cash flows of our businesses.

Since our inception in May 2006, we have recorded gains on sales of our businesses of approximately $198 million. We sold Crosman Acquisition Company (“Crosman”) in January 2007, Aeroglide Company (“Aeroglide”) and Silvue Technologies Group, Inc. (“Silvue”) in June 2008, Staffmark Holdings Inc. (“Staffmark”) in 2011 and HALO Branded Solutions (“HALO”) in 2012. We sold Crosman, our majority owned recreational products company for approximately $143 million and our net proceeds and gain on sale were approximately $110 million and $36 million, respectively. We sold Aeroglide, our majority owned designer and manufacturer of industrial drying and cooling equipment for approximately $95 million and our net proceeds and gain on sale were approximately $78 million and $34 million, respectively. We sold Silvue, our majority owned developer and producer of proprietary, high performance liquid coating systems for approximately $95 million and our net proceeds and gain on sale were approximately $64 million and $39 million, respectively. We sold Staffmark, our majority-owned provider of temporary staffing solutions subsidiary for approximately $295 million and our net proceeds and gain on sale were approximately $217 million and $89 million, respectively We sold HALO, our majority owned fulfillment provider of promotional items for $76.5 million and our net proceeds upon sale were approximately $66.0 million and our loss on sale was approximately $0.5 million.

On August 13, 2013 FOX completed an initial public offering of its common stock. We sold a portion of our shares of common stock in FOX in this offering and received net proceeds totaling $80.9 million. Our ownership position was diluted as a result of the offering. We currently own 53.9% of FOX on a primary basis and 48.9% on a fully diluted basis. No gain was reflected as a result of the sale of our FOX shares because our majority ownership classification of FOX did not change.

Strategic Advantages

Based on the experience of our management team and its ability to identify and negotiate acquisitions, we believe we are well-positioned to acquire additional businesses. Our management team has strong relationships with business brokers, investment and commercial bankers, accountants, attorneys and other potential sources of acquisition opportunities. In addition, our management team also has a successful track record of acquiring and managing small to middle market businesses in various industries. In negotiating these acquisitions, we believe our management team has been able to successfully navigate complex situations surrounding acquisitions, including corporate spin-offs, transitions of family-owned businesses, management buy-outs and reorganizations.

Our management team has a large network of approximately 2,000 deal intermediaries who we expect to expose us to potential acquisitions. Through this network, as well as our management team’s proprietary transaction sourcing efforts, we have a substantial pipeline of potential acquisition targets. Our management team also has a well-established network of contacts, including professional managers, attorneys, accountants and other third-party consultants and advisors, who may be available to assist us in the performance of due diligence and the negotiation of acquisitions, as well as the management and operation of our acquired businesses.

Finally, because we intend to fund acquisitions through the utilization of our Revolving Credit Facility, we expect to minimize the delays and closing conditions typically associated with transaction specific financing, as is typically the case in such acquisitions. We believe this advantage can be a powerful one, especially in a tight credit environment, and is highly unusual in the marketplace for acquisitions in which we operate.

Valuation and Due Diligence

When evaluating businesses or assets for acquisition, our management team performs a rigorous due diligence and financial evaluation process. In doing so, we evaluate the operations of the target business as well as the outlook for the industry in which the target business operates. While valuation of a business is, by definition, a subjective process, we define valuations under a variety of analyses, including:

One outcome of this process is a projection of the expected cash flows from the target business. A further outcome is an understanding of the types and levels of risk associated with those projections. While future performance and projections are always uncertain, we believe that with detailed due diligence, future cash flows will be better estimated and the prospects for operating the business in the future better evaluated. To assist us in identifying material risks and validating key assumptions in our financial and operational analysis, in addition to our own analysis, we engage third-party experts to review key risk areas, including legal, tax, regulatory, accounting, insurance and environmental. We also engage technical, operational or industry consultants, as necessary.

A further critical component of the evaluation of potential target businesses is the assessment of the capability of the existing management team, including recent performance, expertise, experience, culture and incentives to perform. Where necessary, and consistent with our management strategy, we actively seek to augment, supplement or replace existing members of management who we believe are not likely to execute our business plan for the target business. Similarly, we analyze and evaluate the financial and operational information systems of target businesses and, where necessary, we enhance and improve those existing systems that are deemed to be inadequate or insufficient to support our business plan for the target business.

Financing

We have a Credit Facility with a group of lenders led by TD Securities that we entered into on October 27, 2011 and further amended on April 2, 2012.2012, April 3 and August 6, 2013. The Credit Facility provides for a Revolving Credit Facility totaling $290.0$320 million, subject to borrowing base restrictions, and a Term Loan Facility totaling $255 million.$279.8 million at December 31, 2013. The Term Loan Facility requires quarterly payments of $0.6$0.7 million, with a final payment of the outstanding principal balance onin October 27, 2017. The Revolving Credit Facility matures on October 27, 2016.in April 2017.

The Credit Facility provides for letters of credit under the Revolving Credit Facility in an aggregate face amount not to exceed $100 million outstanding at any time. At no time may the (i) aggregate principal amount of all amounts outstanding under the Revolving Credit Facility, plus (ii) the aggregate amount of all outstanding letters of credit, exceed the borrowing availability under the Credit Facility. At December 31, 2012,2013, we had outstanding letters of credit totaling approximately $1.8$1.6 million. The borrowing availability under the Revolving Credit Facility at December 31, 20122013 was approximately $264.2$318 million.

The Credit Facility is secured by all of the assets of the Company, including all of its equity interests in, and loans to, its subsidiaries. (See Note I to the consolidated financial statements for more detail regarding our Credit Facility).

We intend to finance future acquisitions through our Revolving Credit Facility, cash on hand and, if necessary, additional equity and debt financings. We believe, and it has been our experience, that having the ability to finance our acquisitions with the capital resources raised by us, rather than negotiating separate third party financing specifically related to the acquisition of individual businesses, provides us with an advantage in acquiring attractive

businesses by minimizing delay and closing conditions that are often related to acquisition-specific financings. In this respect, we believe that in the future, we may need to pursue additional debt or equity financings, or offer equity in Holdings or target businesses to the sellers of such target businesses, in order to fund multiple future acquisitions.

Our Businesses

We categorize the businesses we own into two separate groups of businesses (i) branded products businesses and, (ii) niche industrial businesses. Branded products businesses are characterized as those businesses that we believe capitalize on a valuable brand name in their respective market sector. We believe that our branded products businesses are leaders in their particular product category. Niche industrial businesses are characterized as those businesses that focus on manufacturing and selling particular products within a specific market sector. We believe that our niche industrial businesses are leaders in their specific market sector.

During the three years ended December 31, 2013, 2012 and 2011, 61.5%, 62.1% and 60.5% of net sales are attributable to our branded products businesses with the remaining net sales attributable to our niche industrial businesses.

Branded Products Businesses

CamelBak

Overview

CamelBak, headquartered in Petaluma, California, is a diversified hydration and personal protection platform, offering products for outdoor, recreation and military applications. CamelBak offers a broad range of recreational / military hydration packs, reusable water bottles, specialized military gloves and performance accessories. As the leading supplier of hydration products to specialty outdoor, cycling and military retailers, CamelBak maintains the leading market share position in recreational markets for hands-free hydration packs and the leading market share position for reusable water bottles in specialty channels. CamelBak is also dominant supplier of hydration systems to the military, with a leading market share in post-issue hydration systems. Over its more than 20-year history, CamelBak has developed a reputation as the preferred supplier for the hydration needs of the most demanding athletes and warfighters. Across its markets, CamelBak is respected for its innovation, leadership and authenticity.

For the fiscal years ended December 31, 2013, 2012 and 2011, CamelBak contributed net sales of approximately $139.9 million, $157.6 million and $42.7 million (from date of acquisition), respectively, and operating income of $17.9 million and $25.5 million in 2013 and 2012, respectively, and an operating loss of $6.8 million in 2011. CamelBak had total assets of $241.0 million, $259.1 million and $262.0 million at December 31, 2013, 2012 and 2011, respectively. Net sales from CamelBak represented 14.2%, and 17.8% of our consolidated net sales in the years ended December 31, 2013 and 2012, respectively, and 7.0% of our consolidated net sales in 2011.

History of CamelBak

Founded in 1989, CamelBak initially gained a following among mountain bikers in the early 1990’s through its first product, the ThermoBak™. As CamelBak grew among this base of users, its products continued to gain acceptance within other arenas where participants needed easy access to water to achieve optimal performance in their activity.

The hands-free feature of CamelBak’s products proved to be appealing to outdoor sports enthusiasts and critical to others, including the U.S. Military. After successfully developing the hands-free hydration category, CamelBak in 2006, recruited new management, including industry veteran and Board member Sally McCoy in the role of CEO, and acquired Southwest Motorsports (since rebranded CamelBak Gloves). With a strong market presence in hydration packs, the management team focused on continued expansion into adjacent markets and developing and executing on a consistent strategy of innovation. Since this time, CamelBak has steadily grown sales and earnings and has enhanced its relationships with suppliers to strengthen its supply chain, reengineered its product distribution capabilities and tightly controlled operating expenses to match the needs of the business.

In 2006, CamelBak expanded its recreational business into the fast growing bottle category. CamelBak’s initial launch of the innovative Better Bottle™ was followed by numerous successful bottle product introductions for everyday users, road cyclists, kids and recreational enthusiasts, including eddy™ and the podium collection . CamelBak was first to market with an entirely BPA-free plastic bottle product line.

We purchased a majority interest in CamelBak on August 24, 2011.

Industry

Recreation Market—With over 100 million participants, the outdoor recreational activity market represents a large, attractive and stable group of consumers. CamelBak’s legacy products have historically been focused on a subset of this group, consisting of cyclists, mountain bikers and other passionate outdoor enthusiasts who tend to be loyal and consistent buyers of premium and performance-enhancing offerings. CamelBak’s core customers are typically outdoor enthusiasts who exhibit very high participation rates and frequent purchasing behavior. In addition to CamelBak’s legacy consumer group, CamelBak has increasingly used its brand authenticity, credibility and broadening product portfolio to reach athletes in adjacent sporting activities.

Long-term growth in the hydration and personal protection industry is driven by a number of factors. Consumer recognition of personal hydration’s importance to health and well-being has been a growing and enduring trend, reflected by the proliferation of bottled water and functional beverages. The importance of water as a healthy choice has become even more prominent as a key component to healthy living. Further, people are increasingly aware of the effects of even minimal dehydration on multiple functions of the body, including brain function, digestion, metabolism and skin health. CamelBak’s products have proven their ability to provide greater hydration. An independent study conducted by Pepperdine University found that people utilizing CamelBak’s Bite Valve™ technology consume 24% more than those using single serving disposable bottled water or less innovative products. Recently there has been a reduction in disposable bottled water consumption in the U.S., primarily as a result of price and the wide-spread awareness of the negative environmental impact of disposable water bottles. With respect to the environment, the disposable water bottle’s environmentally harmful lifecycle is generating significant backlash. We believe the reliance on oil in the production and transportation of the bottles and the fact that over two-thirds of bottles are not recycled is driving consumers to seek alternatives to disposable bottles. Further, there are a number of government mandates forcing the elimination of disposable bottles. Nationwide, local governments are enacting these curbs to combat the cost and waste of disposable bottles. In recent years, governments of all levels have received scrutiny for fiscal irresponsibility and a number of municipalities have launched initiatives focused on curbing disposable water bottles in their communities. In 2006, a San Francisco investigation revealed that the city spent over $500,000 per year on bottled water. This revelation triggered a nationwide analysis of government spending on bottled water with public funds. In 2013 Concord, Massachusetts prohibited the sale of plastic water bottles.

U.S. Government & Military Market—The military acquisition process has responded to the demands of modern warfare which require forces to be more agile and flexible than ever before. This trend has been highlighted by the increased use of multiple funding and procurement mechanisms such as Rapid Fielding Initiatives (“RFI”) and Joint Urgent Operational Needs Statement (“JUONS”). These programs provide funding for mission critical operational needs such as IED detection and defeat and lifesaving warfighter equipment purchases without the normal bid and proposal process that can take months and even years to get equipment in the hands of the end user. In addition to responsive procurement contracts such as the RFI, the military has continued a gradual decentralization of purchasing which allows decision makers closer to the front line to select what specific items need to be acquired for a unit. Unit and individual equipment purchases are made primarily through U.S. Government Services Administration (“GSA”) contracts or at military exchange and supply locations. Warfighters and their families frequently purchase supplemental gear that is superior to standard issue products. CamelBak is well positioned to benefit from continued decentralized purchasing.

Products and Services

CamelBak focuses on offering high quality, industry leading hydration and performance equipment. CamelBak’s products fall into four key categories:

Hydration Packs—CamelBak’s heritage and legacy is in hydration packs and CamelBak maintains the broadest and deepest line of packs in the industry. CamelBak’s core hydration product consists primarily of an easily cleaned and filled polyurethane reservoir, a connecting tube and a self-sealing mouthpiece, or “bite-valve,” which facilitates simple and intuitive drinking. The CamelBak hydration system allows users to conveniently carry one to three liters of water, which can be easily accessed without interruption of the user’s task or activity. The system is most often sold as an integrated backpack or waist-pack, which is uniquely designed for a specific use, such as biking, running or military applications. Hydration packs represented 44%, 50% and 44% of CamelBak’s gross sales in the twelve months ended December 31, 2013, 2012 and 2011, respectively.

Recreation Packs

Having created the hands-free hydration category, CamelBak continues to be the dominant market leader in the recreational sector since its inception. After starting with a mountain biking product, CamelBak developed a host of other types of biking hydration packs that are designed to match specific types of biking. CamelBak sells classic cycling packs that are lightweight and streamlined. CamelBak also sells larger more durable packs designed for long off-road rides and a Downhill/Freeride line designed for specific types of mountain biking activities. By starting with a focused line and expanding it to cover many different types of biking activities, CamelBak has created the deepest, broadest line of hydration packs in the industry.

As CamelBak extended its packs to cover different biking niches, top athletes from other outdoor sports began to clamor for product. To meet this demand, CamelBak has created lines that cater to the diverse set of outdoor athletes:

These customized solutions have all been developed with an eye towards enhancing the performance of each activity’s respective athletes. That customization is part of the innovative difference that allows CamelBak to differentiate itself in a competitive market.

Military Packs

CamelBak sells a wide selection of category leading military packs. Management estimates CamelBak has in excess of 85% market share in post-issue military hydration packs. It is also one of only a few brands sold to U.S. Military personnel that is allowed to prominently display the brand name on the outside of the product. The packs include features such as easy armor integration and extreme durability appropriate for use in the harshest conditions.

Bottles—In 2006, CamelBak parlayed its credibility in hands-free hydration and expanded into bottles. CamelBak introduced the Better Bottle™, subsequently replaced by eddy™, which incorporated a number of features that quickly established it as a best-in-class hydration solution. These features include: (i) the patented spill-proof Bite Valve, (ii) the first insulated stainless steel water bottle and (iii) in 2008, the first all BPA-free line of plastic water bottles.

The success of the Better Bottle™ led CamelBak to design a complete line of bottles that would mirror the pack line’s legacy of customization. CamelBak developed a line for children, which included bite valves that have to be removed from the inside of the bottle to prevent choking. CamelBak also released the Podium^® insulated and non-insulated line, which includes features such as the patented Jet Valve™.

CamelBak’s bottle offering has continued to evolve to meet the specific demands of consumers. These demands have included activity-based needs such as customized cycling bottles. They have also included health concerns, including the consumer backlash against BPA. CamelBak recognized this concern early and became the first to offer an entire line of BPA-free hard plastic bottles in May of 2008.

CamelBak’s bottle offering Groove™, provides users the ability to filter water in any place at any time through its integrated straw assembly. Users simply fill the bottle with tap water, screw the cap on and start sipping. The integrated plant-based carbon filter reduces chlorine taste and odors found in tap water thus improving taste and eliminating the desire to purchase disposable bottles of water.

In 2013 CamelBak introduced Chute™. Chute™ is a BPA-Free reusable bottle that is durable for the outdoor conditions, leak proof for safe transport and features an ergonomic, high flow spout that provides rapid hydration.

Bottles represented approximately 42%, 34% and 31% of CamelBak’s gross sales for the twelve months ended December 31, 2013, 2012 and 2011, respectively.

Gloves—The evolution of CamelBak gloves parallels that of the pack business in the Government / Military channel. Initially created for pit crews in the auto racing market, members of elite squads who became aware of the product were impressed with its dexterity and durability. Following this unofficial endorsement, members of the U.S. Armed Forces began requesting CamelBak gloves. The gloves are highly-technical and difficult to produce, with some styles requiring 44 individual pieces for the assembly of the final product. Today, CamelBak gloves are exclusively a Government / Military product, as their technical characteristics exceed that which a non-military user would desire. Gloves represented approximately 3%, 6% and 14% of CamelBak’s gross sales for the twelve months ended December 31, 2013, 2012 and 2011, respectively. The reduction in Glove sales over the past three years is consistent with the reduction of deployed U.S. troops.

Accessories—CamelBak offers various accessories to complement its hydration systems. Accessories are available for each product line and include items that are made to enhance hydration performance and others for maintenance or replacement parts.

CamelBak’s goal is to reinvent the way that individual athletes, warfighters and every day users hydrate and perform. To that aim, CamelBak has developed a number of new products that help to further enhance the already innovative way that its products deliver water:

•

All Clearis a portable microbiological UV water purifier. It is easy to use with UV light built into the cap that attaches to the bottle. It is fast, completing a cycle in 60 seconds. And it’s proven effective to U.S. EPA guide standards.

CamelBak products are known for their high quality and durability. CamelBak provides products to help maintain this durability and offers replacement parts in the rare instance that the products cease to perform at optimal levels:

In addition to recreational accessories, CamelBak offers a specialized line associated with its military products. These accessories help enhance the performance of military products by adding resistance to chemical and biological agents or allowing connection to standard issue gas masks. For example, the HydroLink allows warfighters to replace their bite valve with a connector, allowing them to hydrate while wearing their gas mask. Accessories accounted for approximately 11%, 10% and 11% of CamelBak’s gross sales for the twelve months ended December 31, 2013, 2012 and 2011, respectively.

Competitive Strengths

Leading Brand Recognition & Market Share—CamelBak believes it has a #1 market share in each of the following areas: (i) recreational hands- free hydration packs, (ii) reusable water bottles for specialty channels and (iii) post-issue hydration packs for the U.S. military. CamelBak enjoys outstanding awareness and a reputation for superior performance with consumers, retailers and warfighters. For example, within the Armed Forces, CamelBak is one of only a few companies allowed to prominently display its brand name on active military products.

Preferred Partner—CamelBak is a preferred partner to leading retailers and the military. CamelBak is a supplier to leading national specialty and sporting goods retailers, including REI, EMS, Dick’s Sporting Goods and The Sports Authority. In addition, CamelBak does business in over 400 military retail exchanges and is an official military supplier which requires a rigorous application and certification process.

Business Strategies

CamelBak keeps an open dialogue with the athletes it endorses and is thus able to gain real-time feedback on the products it produces. By learning the needs of these consumers and others, CamelBak is able to identify other areas to develop ground-breaking hydration solutions. As CamelBak continues to innovate and create new products to serve the needs of more diverse consumers, it will further grow sales to these retailers. As a sports subculture brand, CamelBak is able to migrate to different activities without losing the authenticity and credibility it has developed as a leading product innovator. As examples, skiers and kayakers alike have adopted the brand as their own without even realizing that other sports enthusiasts have done the same.

CamelBak launched its own direct to consumer E-Commerce site during the fourth quarter of 2012. The site initially offered bottles and accessories along with water packs. In 2013, the site expanded to offer more hydration packs as well as purification (All-Clear), and drink (Elixir) and (Mantra) items.

Research and Development

CamelBak’s hydration products are among the most technically advanced and rigorously engineered in their markets. They are specifically designed to function and perform under diverse and extreme conditions. CamelBak’s research and development effort is at the core of its strategy of product innovation and market leadership. CamelBak’s products feature a combination of innovative design, high-quality materials, and superb functionality and performance elements and are recognized as being the leaders or among the leaders in all of the market segments in which they participate.

CamelBak has a robust core research and development team, which has collectively over 36 years of combined industry experience. In addition to the core engineering group, a large number of other CamelBak staff members, who also use CamelBak’s products, contribute to the research and development effort at various stages. Product development also includes collaborating with customers and field testing. This feedback helps ensure products will meet CamelBak’s demanding standards of excellence as well as the constantly changing needs of end users.

CamelBak’s research and development activities are supported by state-of-the-art engineering software design tools, integrated manufacturing facilities and a performance testing center equipped to ensure product safety, durability and superior performance. The testing center collects data and tests products prior to and after commercial introduction. Research and development costs (from the date of acquisition) totaled $3.2 million, $3.0 million and $0.8 million during the years 2013, 2012 and 2011, respectively.

Customers and Distribution channels

CamelBak offers a unique value proposition for its customers. As an innovative subculture sports brand, CamelBak has the authenticity and credibility to defend market share, command premium prices and leverage into new categories. The brand strength allows retailers to hold prices and thus protect margins. Further, CamelBak’s “Got Your Bak” lifetime warranty speaks to the level of quality and customer service offered. CamelBak’s products, which are sold domestically and internationally, are segmented into two major end markets: Recreational and Government/Military. CamelBak’s powerful product distribution network is comprised of long-standing, entrenched relationships with a diversified set of customers. CamelBak’s top ten non-military customers comprised approximately 38%, 30% and 31% of gross sales in the year ended December 31, 2013, 2012 and 2011, respectively CamelBak’s largest recreational customer accounted for approximately 12% of gross sales in 2013 and approximately 8% of gross sales in 2012 and 2011. International sales were approximately 22% of gross sales for the year ended December 31, 2013 and 19% for the same period in 2012 and 2011.

Recreational Distribution—CamelBak markets its hydration and performance products to several channels in the recreational market. Management estimates that it currently holds in excess of 85% of the market share of the hands-free hydration market. A share this large demonstrates the strength of the brand and the credibility that the products have with consumers. CamelBak invented the category in 1989 and although competitors have introduced a number of similar products, CamelBak has held on to its base.

Recreational–Domestic Distribution: The Recreational–Domestic Division is focused on product distribution through a variety of retail accounts in the United States. Particular emphasis is placed on premium active lifestyle retailers across a broad spectrum of channels, including camping/outdoor, bike, natural foods, housewares, hunting/fishing, paddle sports and surf/skate.

The division manages approximately 2,600 retail customers with over 10,000 retail storefronts. Current distribution channels range from specialty bicycle, outdoor, paddle sports, hunting stores and catalogs to large outdoor and sporting goods chains that reach the broader market. Importantly, CamelBak has selectively expanded and diversified its distribution channels over time. Today, notable customers include REI, Dick’s Sporting Goods, EMS, Target, Whole Foods Market, Academy and The Sports Authority.

CamelBak’s entrance into the reusable bottle category in 2006 resulted in a notable broadening of distribution, as CamelBak made the decision to strategically expand into new channels. CamelBak felt it was important to reach an even broader consumer base to further its vision of “obsoleting” bottled water as the most common way to hydrate. The bottle business has also enabled CamelBak to achieve penetration in the college and corporate sponsorship markets.

Recreational–International Distribution: The Recreational–International division is focused on product distribution through outdoor, sporting goods and specialty retailers that are managed through local distributors focused on premier retail accounts. CamelBak maintains an office in Europe to provide oversight of distributor performance, market intelligence and limited supplemental marketing support, including event staffing, trade show management, athlete sponsorships, public relations and market/product intelligence gathering. Order scheduling, fulfillment and logistics support for CamelBak’s international operations are provided from CamelBak’s Petaluma headquarters.

Key international markets include the United Kingdom, Germany, France, Australia, Japan, Canada, Norway and Korea. As is the case in the United States, the CamelBak brand is widely recognized and respected by enthusiasts and maintains a dominant market share.

Military–Retail Exchange Distribution—Military retail exchanges, including the Army and Air Force Exchange Service (“AAFES”), the Navy Exchange Service Command (“NEXCOM”) and the Marine Corps Exchange (“MXC”), are essentially large retail chains serving the military community. Military personnel, veterans and their families are strongly incentivized to shop at exchanges given that the store markup is typically less than the off base markup from other retailers, exchanges do not charge sales tax and a portion of the exchanges’ earnings often go towards funding expenditures related to the military’s morale, welfare and recreation. Furthermore, the exchanges provide an added benefit to consumers, given the convenience they provide to troops deployed in nearby locations.

The military retail exchanges represent large distribution platforms extending across many different countries. CamelBak sells through over 400 locations. CamelBak pioneered the adoption of hands-free hydration systems by U.S. and foreign militaries and is today, we believe, the preferred brand of warfighters. As a result, CamelBak has dominant market share throughout the military retail channel. CamelBak is one of AAFES largest vendors and has a strong, long-term relationship with the retailer.

Government / Military Distribution—In the Government / Military division, CamelBak sells products and accessories related to both hydration and performance. CamelBak continues to expand its Government / Military market by increasing penetration into foreign governments and militaries. A key component of U.S. foreign policy is the replacement of some deployed troops with those of foreign militaries. CamelBak’s success in the U.S. Military carries tremendous credibility abroad, which has enabled CamelBak to achieve meaningful adoption outside the U.S.

CamelBak sells its products through a range of domestic Government / Military channels:

International Government / Military Distribution—International Sales in the Government / Military is driven by ordinary replenishment and large solicitations that occur on an irregular basis to meet the equipment needs of each individual country. CamelBak has consistently participated in these solicitations in the past with significant success.

Sales and Marketing

CamelBak approaches marketing from a unique point of view that is meant to inspire customers. CamelBak is engaged in small endorsement deals that provide gear to actual users as well as athletes who bike, climb and hike professionally as opposed to entering into large multi-year contracts. Second, CamelBak’s marketing campaign uses photographs and videos shot from a user’s perspective. This photographic style encourages the consumers viewing the ad to imagine they are engaging in the activity shown. This experience serves to promote the inspirational nature of CamelBak’s brand by “liberating people to go further.” CamelBak’s sales are typically higher in the spring and summer months as this corresponds with warmer weather in the Northern Hemisphere and an increase in hydration related activities.

Marketing—CamelBak uses a “two pronged” approach to marketing:

Sales Organization—CamelBak’s in-house sales team consists of dedicated sales people and customer service employees. The sales organization is strategically aligned by product category/sales channel. The sales managers split coverage for major national accounts with one team responsible for maintaining and growing sales to established channels and the other for business to larger national retailers and natural foods stores. With an average tenure of over 5 years, CamelBak’s sales team maintains enduring and entrenched relationships with each of its customers.

The Recreational–Domestic division manages customers through both an in- house sales management staff and a network of sales agencies consisting of a number of independent sales representatives. The Recreational– International division manages its international customers through local distributors focused on premier retail accounts. CamelBak maintains an office in Europe with two employees to provide oversight.

CamelBak had firm sales backorders totaling $21.6 million and $29.3 million At December 31, 2013 and 2012, respectively.

Competition

CamelBak pioneered the hydration category with the introduction of the hydration pack more than 20 years ago. CamelBak’s brand admiration and customer loyalty, which are driven by its innovative products, have allowed it to continuously defend its market position in packs. These traits have also allowed CamelBak to successfully enter the bottle category where it holds a leading market position.

A summary of CamelBak’s competitors in hydration packs, bottles and reservoirs is listed below:

CamelBak Recreational Competitors

Across its military product set, CamelBak competes against a wide variety of industry players which include large prime and tier two defense companies, small and mid-sized companies specializing in warfighter equipage and companies focused predominantly on the consumer or materials market with a limited number of defense product offerings. CamelBak is recognized as a high-end supplier in each of its product categories (hydration and gloves). Management believes CamelBak is the leading supplier of post-issue hydration packs with over 85% of the market share and among the leading providers of specialized tactical gloves which are worn by some of the most elite warfighters in the world.

Suppliers

CamelBak’s product manufacturing is based on a dual strategy of in-house manufacturing and strategic alliances with select sub-contractors and vendors. CamelBak operates a scalable, low-cost supply chain, sourcing materials and employing contract manufacturers from across the Asia-Pacific region, the U.S. and Puerto Rico. Once manufactured, products are shipped directly from overseas manufacturers to CamelBak’s distribution center in San Diego for receiving and stocking and thereafter distributed to retail locations or third-party distributors.

CamelBak has developed an efficient and low-cost supply chain. CamelBak’s deep understanding of military procurement requirements has allowed it to build a flexible network of vendors to reliably meet large military orders on short notice and to shift orders to vendors to be compliant with military requirements for its products. While striving to maximize the profitability of its products, CamelBak is also keenly aware of its corporate responsibility and, thus, holds itself and its vendors to the highest supply chain practices. As a result of CamelBak’s dedication to superior supply chain and manufacturing practices, the U.S. Military’s GSA named CamelBak the “Green Contractor of the Year” in 2009 and “MAS Contractor of the year in 2011”.

In recent years, CamelBak has streamlined its operating expenses, tightening cost controls and maintaining a cost structure more in line with the size of its platform. Additionally, CamelBak has driven cost improvements by negotiating prices with vendors using an “open book” policy, in which each vendor’s profit margins, labor rates and material costs are agreed to upfront. This allows CamelBak’s operations group to negotiate reductions in component prices from raw material manufacturers resulting in cost savings.

CamelBak’s primary raw materials are fabric, resin, polyurethane film and various resins for which CamelBak and/or its supplier partners receive multiple shipments per week. CamelBak purchases its materials from a combination of domestic and foreign suppliers.

Intellectual Property

Hydration priorities include easy cleaning and filling, freshness and taste, durability, temperature, water purity, leak-proof products and sustainability, all of which improve a customer’s overall hydration experience or enable the customer to perform at high levels. As a reflection of this focus, CamelBak holds 51 active patents and 33 pending patent applications.

Regulatory Environment

Management is not aware of any existing, pending or contingent liabilities that could have a material adverse effect on CamelBak’s business. CamelBak is proactive regarding regulatory issues and is in compliance with all relevant regulations. Management is not aware of any potential environmental issues.

Employees

As of December 31, 2013, CamelBak employed approximately 252 persons. None of CamelBak’s employees are subject to collective bargaining agreements. CamelBak believes its relationship with its employees is good.

Ergobaby

Overview

Ergobaby, headquartered in Los Angeles, California, is a premier designer, marketer and distributor of wearable baby carriers and related baby wearing products as well as stroller travel systems and accessories. Ergobaby offers a broad range of wearable baby carriers, stroller travel systems and related products that are sold through more than 450 retailers and web shops in the United States and throughout the world.

Ergobaby’s reputation for product innovation, reliability and safety has led to numerous awards and accolades from consumer surveys and publications, including babycenter, theBump, SheKnows Parenting, Parenting Magazine, Pregnancy magazine and Wired magazine.

For the fiscal years ended December 31, 2013, 2012 and 2011, Ergobaby had net sales of approximately $67.3 million, $64.0 million, and $44.3 million (from date of acquisition), respectively. Ergobaby had operating income totaling $12.6 million, $10.9 million and $7.9 million (from date of acquisition) in the years ended December 31, 2013, 2012 and 2011, respectively. Ergobaby had total assets of $115.3 million, $117.7 million and $118.4 million at December 31, 2013, 2012 and 2011, respectively. Ergobaby’s net sales represented 6.8%, 7.2% and 7.3% of our consolidated net sales for the year ended December 31, 2013, 2012 and 2011, respectively.

History of Ergobaby

Ergobaby was founded in 2003 by Karin Frost, who designed baby carriers following the birth of her son. The baby carrier product line has since expanded into five key categories: the Original, Designer, Organic, Performance, and Travel carriers with multiple style variations. In its second year of operations, Ergobaby sold 10,500 baby carriers and by 2013 sold over 1,039,000 in the year. In order to support the rapid growth, in 2007, Ergobaby made a strategic decision to establish an operating subsidiary (“EBEU”) in Hamburg, Germany. We purchased a majority interest in Ergobaby on September 16, 2010.

On November 18, 2011 Ergobaby acquired Orbit Baby for approximately $17.5 million. Founded in 2004 and based in Newark, California, Orbit Baby produces and markets a premium line of stroller travel systems that utilize a patented hub ring to allow parents to easily move car seats from car seat bases to stroller frames in an instant without the need for any additional components. The product offering has increased to a full line of mix-and-match seats and bases.

In 2013, Ergobaby expanded its portfolio into the swaddling category. The launch of the Ergobaby Swaddler which focused on healthy hip and arm positioning for newborns is the first significant category expansion outside of baby carriers for the Ergobaby brand.

Both brands are well regarded in the infant and juvenile industry. Ergobaby was named to the “20 Best Products in the Last 20 Years” by Parenting Magazine (2007), and continues to be recognized for its quality evident by recently being named babycenters’ 2012 “Moms’ Pick” for Best Baby Carrier. The Orbit Baby Infant System has received vast honors, including, 2007 iParenting Media Award for Best Product, Baby Gizmo’s Editor’s Choice 2012, babble.com favorite Car Seats 2012, She Knows Parenting Stroller Award 2011, and Lilsugar Best Stroller of 2010.

Industry

Ergobaby competes in the large and expanding infant and juvenile products industry. The industry exhibits little seasonality and is somewhat insulated from overall economic trends, as parents view spending on children as largely non-discretionary in nature. Consequently, parents spend consistently on their children, particularly on durable items, such as car seats, strollers, baby carriers, and related items that are viewed as necessities. Further, an emotional component is often a factor in parents’ purchasing decisions, as parents desire to purchase the best and safest products for their children. As a result, according to the USDA’s most recent report on Expenditures on Children by Families 2012 (released in June 2013), parents on average, spend between $8,990 and $25,180 on their child on an annual basis for related housing, food, transportation, clothes, healthcare, daycare and other items, depending on age of the child & annual income. The amount spent by parents in the highest income group (before tax income greater than $105,000) was more than twice the amounts spent by parents in the lowest income group (before tax income of less than $60,640). On average, households spent between 12-25% of their before-tax income on a child. Similar patterns are seen in other counties around the world. According to a Mintel Group Ltd. report published in March 2010, estimated 2010 retail dollars spent on baby durables reached approximately $10.3 billion in the U.S. in 2010, up approximately $9.5 billion from 2004, with a considerably larger market worldwide. The U.S. retail market is expected to continue its growth trajectory through 2014 with an anticipated market size of approximately $12.0 billion.

Demand drivers fueling the growing spending on infant and juvenile products include favorable demographic trends, such as (i) an increasing number of births worldwide; (ii) a high percentage of first time births; (iii) an increasing age of first time mothers and a large percentage of working mothers with increased disposable income; and (iv) an increasing percentage of single child households and two-family households.

Given that the child’s safety is paramount, many parents do not want to compromise a baby or child’s safety by purchasing secondhand products to save money. In many cases, when purchasing secondhand, the parent does not know key facts about the product they are buying, such as the age of the product, history of the item, or potential recalls by the manufacturer. Furthermore, the safety standards for the product may have changed since the version being resold, resulting in a product that does not meet the most rigorous safety standards. Consequently, as parents consider purchases of important necessities such as baby durables, they typically favor new products. According to Mintel Research, approximately 83% of baby carrier purchases were first-time purchases, with the remainder being either purchased second hand or borrowed.

Safety influences not only whether parents purchase new or used products, but also which brands parents choose, which consequently impacts pricing and competition within the infant and juvenile products market. In purchases of baby durables, parents often seek well-known and trusted brands that offer a sense of comfort regarding a product’s reliability and safety. As a result, brand name and safety certifications can serve as a barrier to entry for competition in the market, as well as allow well-known brands such as Ergobaby to charge a premium.

Wearable Carriers and Baby Wearing Trends

Within the broader market for infant and juvenile products, Ergobaby operates specifically within the market for child mobility and transport products. According to the Juvenile Products Manufacturers Association (“JPMA”), reported child mobility and transport manufacturer dollar sales, which includes sales of carriers, strollers, travel systems, and related products, totaled approximately $1.1 billion in the U.S. in 2012. Penetration of baby carriers currently trails that of strollers, car seats, and other infant and juvenile products. JPMA manufacturer sales growth from 2011 to 2012 suggests that the soft carrier segment is growing more rapidly than other infant and juvenile product categories, with 21.3% unit growth and dollar growth. Comparatively, stroller shipments and convertible car seat shipments increased 10.3% and 11.2%, respectively, over the same period

Management believes that continued growth within the market for wearable baby carriers is driven by several trends, including (i) lower relative penetration of baby carriers versus other infant and juvenile products; (ii) favorable demographics; (iii) increasing focus on the popularity of baby wearing; and (iv) convenience and mobility of wearable products.

Products and Services

Ergobaby Baby Carriers

Ergobaby has two main baby carrier product lines: baby carriers and related carrier accessories. Ergobaby’s baby carrier design supports a natural sitting position for babies, eliminating compression of the spine and hips that can be caused by unsupported suspension. The baby carrier also balances the baby’s weight to parents’ hips and shoulders, and alleviates physical stress for the parent. Additional accessories are provided to complement the baby carriers including the increasingly popular Infant Insert.

Within the Baby Carrier product line, Ergobaby sells five key categories or collections: the Original, Designer, Organic, Performance, and Travel carriers and; within each line, Ergobaby offers multiple styles and color variations. Original carriers represented 64%, 55% and 39% of 2013, 2012 and 2011 carrier sales, respectively, and Organic carriers represented 19%, 21% and 37%, of 2013, 2012 and 2011 carrier sales, respectively, with all other carriers representing the remaining sales in each year. Baby Carrier sales were approximately $53.8 million, $44.6 million and $37.8 million in the years ended December 31, 2013, 2012 and 2011, respectively, and represented approximately 79.9% of total sales in 2013, 70% of total sales in 2012, and 86% of total sales in 2011.

Within the accessories category, the Infant Insert is the largest sales component of the accessory category, representing more than half of total accessory sales for 2011, 2012, and 2013. Accessory sales were $6.9 million, $6.0 million, and $6.5 million in 2013, 2012 and 2011, respectively and represented approximately 12% in 2013, and 13% of total sales in each of 2012, and 2011.

Ergobaby’s core Baby Carrier product offerings with average retail prices are summarized below:

Orbit Baby Infant Systems

The Orbit Baby Infant System has three main product groups: stroller travel systems, product extensions and accessories.

The Orbit Baby Stroller Travel System is a three-piece kit that includes an infant car seat, car seat base, and stroller. Unlike traditional infant travel systems, the Orbit Stroller Travel System’s unique docking technology, or “SmartHub TM “, allows for easy interchange of four different seats, including the Infant Car Seat, Stroller Seat, Bassinet, and Toddler Car Seat.

The Orbit Baby car seat base (which stays in the car when not in use) is touted as the easiest, quickest base to safely install. The base’s patent-pending StrongArm TM technology allows a secure installation in 60 seconds and easily docks the car seat from almost any angle, allowing the parent to ergonomically transport the child.

The Orbit Baby Infant Car Seat is the common “plug-in” for the three-in-one system and can be moved effortlessly from the car seat base to the stroller. As a result of the SmartHub technology, Orbit is the only infant car seat that ergonomically rotates for simple docking and undocking to and from the car and stroller.

The third member of the Stroller Travel System is Orbit’s modern and easy-to-use stroller. As is the case with the car seat base, the circular SmartHub allows the infant car seat to dock on the stroller from any angle without adaptors, and with 360 degree rotation and recline, the baby can face rear, forward, or sideways to view the world from different perspectives.

Orbit Baby offers product extensions including additional seats and strollers, including the Double Helix Stroller for multiple children, to accommodate growing families.

Orbit Baby also offers a wide range of accessories including the Sidekick Stroller Board, Stroller Panniers, Weather Pack, Color Pack, Footmuffs, Stroller Travel Bag and Baby Gear Spa Kit.

Orbit Baby’s core product offerings, extensions and accessories and suggested retail prices are below:

Competitive Strengths

Ergobaby innovation—Ergobaby Carriers are known for their unsurpassed comfort– Ergobaby’s superior design results in improved comfort for both parent and baby. Parents are comfortable because baby’s weight is evenly distributed between the hips and shoulders while baby sits ergonomically in a natural sitting position. The concept of baby carrying has increased in popularity in the U.S. as parents recognize the emotional and functional benefits of carrying their baby. Consumers continually cite the comfort, design, and convenient “hands free” mobility the Ergobaby carrier offers as key purchasing criteria.

Orbit Baby Innovation – With 17 patents and 5 patents pending, Orbit Baby offers a complete child travel system, from stroller to car seat and beyond. A favorite with moms and dads alike, the integrated Orbit Baby system is designed to take your children everywhere with unprecedented ease and style. With an emphasis on advanced safety and engineering, Orbit Baby is continually recognized for its innovation, ergonomic design and environmentally friendly focus. Orbit Baby applies hands-on experience and extensive research to create products that are elegantly simple, intuitive to use, and unsurpassed in real-world safety.

Business Strategy

child that Ergobaby carriers enable. Ergobaby currently markets its products to consumers in the U.S. through brick-and-mortar retailers, including specialty boutiques; online web shops; and directly through its website. Management has developed a targeted strategy to increase its penetration of these currently underpenetrated distribution channels that includes: (i) improved retain presence, including new packaging and in-store support materials; (ii) improving the effectiveness of marketing programs including utilization of social sites, digital marketing, and improved consumer engagement, and (iii) development of new products and designs.

Customers

Ergobaby primarily sells its products through brick-and-mortar retailers, online retailers and distributors and derives approximately 60% of its sales from outside of the U.S. Within the U.S., Ergobaby sells its products through over 450 brick-and-mortar retail customers and small infant and juvenile products chains, representing an estimated 2,900 retail doors. Ergobaby products are sold through its German based subsidiary, Ergobaby Europe, which services brick-and-mortar retailers and online retailers in Germany and France as well as services a network of distributors located in the United Kingdom, Austria, Finland, Russia, Switzerland, Belgium, the Netherlands, Sweden, Norway, Spain, Denmark, Italy, Turkey and the Ukraine. Sales to customers outside of the U.S. and European markets are predominantly serviced through distributors granted rights, though not necessarily exclusive, to sell within a specific geographic region.

Sales & Marketing

Within the U.S., Ergobaby directly employ sales professionals and utilizes independent sales representatives assigned to differing U.S. territories managed by in-house sales professionals. Independent salespeople in the U.S. are paid on a commission basis based on customer type and sales territory.

In Europe, Ergobaby directly employs its salespeople. In Europe, salespeople are paid a base salary and a commission on their sales, which is standard in that territory. Ergobaby Europe handles all Ergobaby distributor orders within the European countries including Russia and Ukraine; all other orders are handled through Ergobaby’s U.S. offices.

Ergobaby has implemented a multi-faceted marketing plan which includes (i) targeted print advertising; (ii) online marketing efforts, including online advertisement, search engine optimization and social networking efforts; (iii) increasing tradeshow attendance; and (iv) increasing promotional activities.

Ergobaby had approximately $13.2 million and $10.0 million in firm backlog orders at December 31, 2013 and 2012, respectively.

Competition

The infant and juvenile products market is fragmented, with a few larger manufacturers and marketers with portfolios of brands and a multitude of smaller, private companies with relatively targeted product offerings.

Within the infant and juvenile products market, Ergobaby’s Carriers primarily compete with companies that market wearable baby carriers. Within the wearable baby carrier market, several distinct segments exist, including (i) slings and wraps; (ii) soft-structured baby carriers; and (iii) hard frame baby carriers.

The primary global competitors in this segment are Baby Bjorn, Chicco, Britax and Manduca, which also market products in the premium price range. Especially in the US, Ergobaby also competes with several smaller companies that have developed wearable carriers, such as Beco, Boba, and L’il Baby. Within the soft-structured baby carrier segment, Ergobaby benefits from strong distribution, good word of mouth, and the functionality of the design.

The Orbit Baby Infant System principally competes with other premium stroller systems including Stokke, Bugaboo, UppaBaby and Quinny.

Suppliers

During 2013, Ergobaby sourced its carrier and carrier accessory products from China, Vietnam and India and manufactures its stroller systems and accessory products in China. In 2012, Ergobaby began sourcing non-organic carriers and accessories from a manufacturing facility in Vietnam. China and Vietnam accounted for approximately 76.1% of Ergobaby’s purchases in 2013. Ergobaby partnered with a manufacturer located in India in 2009, which manufactures Ergobaby’s organic carriers and accessories, and represented approximately 23.9% of Ergobaby’s purchases in 2013. Ergobaby’s manufacturers in China, Vietnam and India have the additional capacity to accommodate Ergobaby’s projected growth.

Intellectual Property

Ergobaby maintains a utility patent on its standard carrier, which was filed in 2003 and issued January 29, 2009. Notwithstanding this patent, Ergobaby primarily depends on brand name recognition and premium product offering to differentiate itself from competition. Ergobaby also has 17 patents and 5 patents pending for its Orbit Baby technology including Smart Hub.

Regulatory Environment

Management is not aware of any existing, pending, or contingent liabilities that could have a material adverse effect on Ergobaby’s business. Ergobaby is proactive regarding regulatory issues and is in compliance with all relevant regulations. Ergobaby maintains adequate product liability insurance coverage and to date has not incurred any losses. Management is not aware of any potential environmental issues.

Employees

As of December 31, 2013 Ergobaby employed 98 persons in 5 locations. None of Ergobaby’s employees are subject to collective bargaining agreements. We believe that Ergobaby’s relationship with its employees is good.

FOX

Overview

FOX, headquartered in Scott’s Valley, California is a designer, manufacturer and marketer of high-performance suspension products used primarily on mountain bikes, side-by-side vehicles, on-road vehicles with off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, or ATVs, snowmobiles, specialty vehicles and applications, and motorcycles. FOX’s products offer innovative design, performance, durability and reliability that enhance ride dynamics (the interplay between the rider, the vehicle and the terrain), by improving performance and control. The FOX brand is associated with high-performance and technologically advanced products that provide users with improved control and a smoother ride while riding over rough terrain in varied environments.

FOX designs its products for, and markets its products to, some of the world’s leading original equipment manufacturers, or OEMs, in its markets, and to consumers through the Aftermarket channel. Management believes that OEMs often prominently display and incorporate FOX products to improve the marketability and consumer demand for their high-performance models, which reinforces the FOX brand image. In addition, consumers purchase select FOX products in the Aftermarket channel where FOX markets through a global network of dealers and distributors.

For the fiscal years ended December 31, 2013, 2012 and 2011, Fox had net sales of approximately $272.7 million, $235.9 million, and $197.7 million and operating income of $38.8 million, $26.2 million and $22.6 million, respectively. Fox had total assets of $159.4 million, $142.8 million and $130 million at December 31, 2013, 2012 and 2011, respectively. Fox’s net sales represented 27.7%, 26.7%, and 32.6% of our consolidated net sales for the years ended December 31, 2013, 2012 and 2011, respectively.

Recent Developments

On March 5, 2014, FOX entered into a definitive agreement to acquire the business of Sport Truck USA (“Sport Truck”) a full service, globally recognized distributor, primarily of its own branded aftermarket suspension solutions and a reseller of FOX products. Sport Truck also designs, markets, and distributes high quality lift kit solutions through their wholly owned subsidiaries BDS Suspension and Zone Offroad Products. FOX will acquire Sport Truck in an asset purchase transaction for approximately $44 million due at closing. The transaction is being financed with debt and includes a potential earn-out opportunity of up to a maximum of $29.3 million payable over the next three years contingent upon the achievement of certain performance based financial targets. The transaction is subject to approval by the employee stock ownership plan shareholders of Sport Truck and is expected to close by the end of March 2014.

History of Fox

Robert C. Fox, Jr. began developing suspension products in 1974 when, having participated in motocross racing, he sought to create a racing suspension shock that performed better than existing coil spring shocks. Working in a friend’s garage, Mr. Fox created the “Fox AirShox.” The product was successful, and went into production in 1975. The next year, in 1976, Fox AirShox was used by the rider who won the AMA 500cc National Motocross Championship.

FOX suspension users have won numerous major races including 500cc Grand Prix races (motocross), Baja 1000 races (off-road), AMA SuperBike races (motorcycle road racing), and the Indianapolis 500 race (auto racing), generating greater market awareness of the FOX brand among enthusiasts.

FOX applied many of the same core suspension technologies developed for motocross racing to other categories. For example, in 1987 FOX started selling high-performance suspension products for snowmobiles. By 1991, FOX began supplying the mountain bike industry with rear shocks, FOX entered the ATV and other off-road vehicle markets in the mid-1990s and in 2001 FOX began offering front fork suspension products for mountain bikes.

We purchased a majority interest in FOX on January 4, 2008.

On August 13, 2013 FOX completed an initial public offering of its common stock. FOX sold 2,857,143 of its shares and certain of its shareholders, including us, sold 7,000,000 shares at an initial offering price of $15.00 per share. FOX currently trades on the NASDAQ exchange under the symbol FOXF. Subsequent to the initial public offering we currently own 53.9% of FOX.

Industry

FOX participates in markets that are diverse, both geographically and by product type. FOX manufactures and markets high performance; premium priced (high-end) suspension products in the large global markets for mountain bikes and powered vehicles used by recreational and professional users. FOX products for powered vehicles are used primarily on Side-by-Sides, on-road vehicles with off-road capabilities, off-road vehicles and trucks, ATVs, snowmobiles, specialty vehicles and applications, and motorcycles.

Suspension systems are critical to the performance of the mountain bikes and powered vehicles in the markets and product categories in which FOX participates. Technical features, component performance, product design, durability, reliability and brand recognition can strongly influence the purchasing decisions of consumers. Over the past decade, there have been significant technological advances in materials and features that have increased product functionality and performance, allowing high-end suspension products to be adapted for use in additional end-markets and mountain bike and powered vehicle categories.

Products and Services

FOX designs and manufactures high-performance suspension products that dissipate the energy and force generated by mountain bikes and powered vehicles while they are in motion. A suspension product allows wheels or skis (in the case of snowmobiles) to move up and down to absorb bumps and shocks while maintaining contact with the ground for better control. FOX products use adjustable suspension, position sensitive damping, multiple air spring technologies, low weight and structural rigidity, all of which improve user control for greater performance.

FOX uses high-grade materials in their products and have developed a number of sophisticated assembly machines to maintain quality across all product lines. FOX suspension products are assembled according to precise specifications throughout the assembly process to create consistently high-performance levels and customer satisfaction.

Mountain bikes—In the mountain bike product category, FOX offers high performance front fork and rear suspension products designed for cross-country, trail, all-mountain, free-ride and downhill riding. FOX also offers a ride-height adjustable seat post product ( D.O.S.S.), which was introduced in 2012 to allow a rider to adjust his or her seat position for uphill, rolling trail or downhill riding without having to stop the mountain bike to adjust the seat. Mountain bike products are sold in three series: (i) Evolution series, designed for demanding, yet value-minded, enthusiasts; (ii) Performance series, designed for experienced enthusiasts and expert riders; and (iii) Factory series, which is designed for maximum performance at a professional level.

Powered vehicles—FOX designs and manufactures high performance suspension products for Side-by-Sides, on-road vehicles with off-road capabilities, off-road vehicles and trucks, ATVs, snowmobiles, specialty vehicles and applications, and motorcycles. Products for these vehicles are designed for trail riding, racing and performance. FOX suspension products have also been used on limited quantities of off-road military vehicles and other small-scale select military applications. Products in the powered vehicle category range from two inch aluminum bolt-on shocks to patented position sensitive internal bypass shocks.

Competitive Strengths

Broad offering of high-performance products across multiple consumer markets—Through the use of adjustable suspension, position sensitive damping, multiple air spring technologies, lightweight and rigid materials, and other technologies and methods, FOX suspension products improve the performance and control of the vehicles used by its consumers. FOX management believes that its reputation for high-performance products is reinforced by the successful finishes in world class competitive events by athletes incorporating FOX products in their vehicles, including the following examples in 2013:

Strategic brand for OEMs, dealers and distributors—Through its strategic relationships, FOX is often sought out by OEM customers and works closely with them to develop and design new products and product enhancements. Management believes this collaborative approach and product development processes strengthen FOX’s relationships with its OEM customers. Management further believes that consumers value FOX branded suspension products when selecting high-performance mountain bikes and powered vehicles, and as a result, OEMs purchase and incorporate FOX premium suspension products in their mountain bikes and powered vehicles in order to increase the sales of their premium priced products. In addition, the inclusion of FOX products on high-end mountain bikes and powered vehicles reinforces the premium brand image which helps to drive sales in the Aftermarket channel.

Premium brand with strong consumer loyalty—FOX has developed a reputation for high-performance products resulting in a premium brand of high-performance suspension products that are generally sold at premium prices. The FOX logo is prominently displayed on each of its products used on mountain bikes and powered vehicles sold by OEM customers, which helps further reinforce its brand image. FOX management believes the FOX brand has achieved strong loyalty from its consumers.

Track record of innovation and new product introductions—FOX’s experience in suspension engineering and design in multiple markets and with a variety of vehicles, enables them to bring unique ride dynamics solutions to its customers. These ride dynamics often developed for use in one market may ultimately be deployed across multiple markets. For example, FOX’s success in the high-end ATV category led to the widespread adoption of the same suspension technology in the Side-by-Side market, which became the second largest product category by sales for FOX in 2012.

During 2013, FOX launched more than 20 new products and generated more than 70% of its sales from products it introduced during the last three years. The following are examples of recent new development.

Business Strategies

Research and Development

FOX employs full-time engineers focused on product development and employs numerous other technicians and employees who spend at least part of their time testing and using FOX products and helping develop engineering-based solutions to enhance product offerings. In addition, a large number of its employees, many of whom use FOX’s suspension products in their recreational activities, contribute to research and development and product innovation initiatives. Their involvement in the development of new products ranges from participating in initial brainstorming sessions to ride testing products in development. Product development also includes collaborating with OEM customers across end-markets, field testing by professional athletes and sponsored race teams and working with enthusiasts and other users of FOX products. This feedback helps to develop innovative products which meet FOX’s demanding standards as well as the evolving needs of professional and recreational end users and to quickly commercialize these products.

FOX’s research and development activities are supported by state-of-the-art engineering software design tools, integrated manufacturing facilities and a performance testing center equipped to enhance product safety, durability and high-performance. The testing center collects data and tests products prior to and after commercial introduction. Suspension products undergo a variety of rigorous performance and accelerated life tests before they are introduced into the market. The research and development portion of FOX’s total engineering costs totaled approximately $10.4 million, $9.7 million and $9.8 million in 2013, 2012 and 2011, respectively.

Customers

FOX currently sells its product to more than 150 OEMs and distributes its products to more than 2,500 retail dealers and distributors of Aftermarket product worldwide. In 2013, 81% of sales resulted from sales to OEM’s and 19% resulted from sales to dealers and distributors for resale in the Aftermarket channel.

Sales attributable to FOX’s 10 largest OEM customers, accounted for approximately 57%, 56% and 53% of sales in 2013, 2012 and 2011, respectively.

Sales to Fox’s largest customer accounted for approximately 17%, 13% and 12% of its sales in 2013, 2012 and 2011, respectively.

Domestic sales totaled $96.1 million, $84.3 million and $65.8 million, or 35%, 36% and 33% of total sales in 2013, 2012 and 2011, respectively. International sales totaled $176.6 million, $151.6 million and $132.0 million or 65%, 64% and 67% of total sales in 2013, 2012 and 2011, respectively. Sales attributable to countries outside the United States are based on shipment location. International sales, however, do not necessarily reflect the location of the end users of FOX products, as many of these products are incorporated into mountain bikes that are assembled at international locations and then shipped back to the United States.

Mountain bikes – FOX mountain bike suspension products are sold to more than 150 domestic and international bike OEMs, including Giant, Scott, Specialized and Trek. FOX has long-standing relationships with many of the top mountain bike OEMs. After incorporating FOX products on their mountain bikes, OEMs typically sell their mountain bikes to independent dealers, which then sell directly to consumers.

In the Aftermarket, FOX typically sells to dealers in the U.S. and through distributors internationally. These dealers then sell directly to aftermarket consumers. FOX’s overseas distributors sell to independent dealers, which then sell directly to consumers.

Powered vehicles - Suspension products for the powered vehicles industry are sold to a number of OEMs, including BRP, Ford and Polaris. FOX is currently developing relationships with new OEMs, as the powered vehicles market continues to grow. After incorporating FOX products on their powered vehicles, OEMs typically sell their powered vehicles to independent dealers, which then sell directly to consumers.

In the Aftermarket, FOX typically sells its product through dealers and distributors, both in the U.S. and internationally. FOX dealers typically sell directly to Aftermarket consumers. FOX distributors, typically sell to independent dealers, which then sell directly to consumers.

Current FOX product offerings currently target high-performance suspension products for Side-by-Sides, on-road vehicles with off-road capabilities, off-road vehicles and trucks, ATVs, snowmobiles, specialty vehicles and applications, and motorcycles. In the past, FOX products have also been used on limited quantities of off-road military vehicles and other small-scale select military applications.

Sales and Marketing

FOX employs a number of specialized and dedicated sales professionals. Each sales professional is fully committed to servicing their customers within our product categories, ensuring that FOX customers are in contact with capable and knowledgeable sales professionals to address their specific needs. FOX sales professionals receive training on the latest FOX products and technologies and attend trade shows to increase their market knowledge.

FOX’s marketing strategy focuses on strengthening and promoting the FOX brand in the marketplace. FOX strategically focuses its marketing efforts on enthusiasts seeking high-end suspension systems through promotions at destination riding locations and individual and team sponsorships and the success of professional athletes who use FOX products. This strategic focus on the performance and racing segments in FOX’s markets influences many aspiring and enthusiast consumers to purchase FOX suspension products and enables FOX products to be sold at premium price points.

Fox’s sales are seasonal. In each of the last three fiscal years, quarterly sales have been the lowest in the first fiscal quarter and the highest during the third fiscal quarter of the year.

In addition to the FOX website and traditional marketing channels, such as print advertising and tradeshows, FOX maintain an active social media presence, including a Facebook page, YouTube channel, a Vimeo page and a Twitter feed to increase brand awareness, foster loyalty and build a community of users.

Fox had approximately $22.4 million and $30.6 million in firm backlog orders at December 31, 2013 and 2012, respectively.

Competition

The markets for FOX suspension products are highly competitive. FOX competes with other companies that produce suspension products for sale to OEMs, dealers and distributors, as well as with OEMs that produce their own line of suspension products for their own use. Competition in the high-end segment of the suspension products market revolves around technical features, performance, product design, innovation, reliability and durability, brand, time to market, customer service and reliable order execution. While the pricing of competing products is always a factor, management believes the high-performance of its products justifies its premium pricing. FOX competes with several large suspension providers and numerous small manufacturers that provide branded and unbranded products across all of FOX’s product lines. These competitors can be divided into the following categories:

Mountain bikes—Within the market for mountain bike suspension products, FOX compete with several companies that manufacture front and rear suspension products, including RockShox (a subsidiary of SRAM Corporation), X-Fusion Shox (a wholly-owned subsidiary of A-Pro), Manitou (a subsidiary of HB Performance Systems), SR Suntour, DT Swiss (a subsidiary of Vereinigte Drahtwerke AG) and Marzocchi (Tenneco).

Powered vehicles—Within the market for powered vehicle suspension products, FOX competes with several companies in different submarkets. A significant competitor for suspension products in the snowmobile market is KYB (Kayaba Industry Co., Ltd.). Other suppliers of suspension products for snowmobiles include Öhlins Racing AB, Walker Evans Racing, Works Performance Products, Inc. and Penske Racing Shocks / Custom Axis, Inc. In the ATV and Side-by-Side markets, outside of captive OEM suppliers, FOX competes with ZF Sachs (ZF Friedrichshafen AG) and Walker Evans Racing for OEM business and Elka Suspension Inc., Öhlins Racing AB, Works Performance Products and Penske Racing Shocks / Custom Axis, Inc. for aftermarket business. In the market for off-road and specialty vehicle suspension products, FOX’s two biggest competitors are ThyssenKrupp Bilstein Suspension GmbH (commonly known as Bilstein) and King Shock Technology, Inc. (commonly known as King Shock). Other competitors include Icon Vehicle Dynamics, Sway-A-Way, Pro Comp USA Suspension and Rancho (Tenneco).

Competition in the high-end performance segment of the suspension market revolves around technical features, performance and durability, customer service, price and reliable order execution. While pricing of competing products is always a factor, FOX management believes that the high-performance of their products helps justify their premium pricing.

Suppliers

FOX’s primary raw materials used in the production of its products are aluminum, magnesium and steel. FOX uses multiple suppliers for these raw materials and believe that these raw materials are in adequate supply and available from many suppliers at competitive prices. Prices for these raw materials fluctuate from time to time, but historically, price fluctuations have not had a material impact on production costs.

FOX works closely with its supply base, and depends upon certain suppliers to provide raw inputs, such as forgings, castings and molded polymers that have been optimized for weight, structural integrity, wear and cost. In certain circumstances, FOX depends upon a limited number of suppliers for such raw inputs. FOX typically has no firm contractual sourcing agreements with these suppliers other than purchase orders.

Miyaki is the exclusive producer of the Kashima coating for our suspension component tubes. As part of our agreement with Miyaki, which we entered into in 2009, or the Kashima Agreement, we have been granted the exclusive right to use the trademark “KASHIMACOAT” on products comprising the aluminum finished parts for suspension components (e.g., tubes) and on related sales and marketing material worldwide, subject to a minimum model year order and certain other exclusions. The Kashima Agreement does not contain minimum purchase obligations.

Manufacturing

FOX manufactures and completes final assembly on its products. By controlling the manufacturing process of its products, FOX is able to maintain strict quality standards, customize machines and processes for the specific requirements of a product, and quickly respond to feedback receive on products in development. Furthermore, manufacturing its own products enables FOX to adjust labor and production inputs to meet seasonal demands and the customized requirements of some of its customers.

FOX currently manufactures the majority of its suspension products at its California facilities. FOX is currently in the process of transitioning the majority of its mountain bike products manufacturing operations to a new facility in Taichung, Taiwan over the next three years, with the final completion of the transition scheduled for 2015. In

connection with this transition, FOX anticipates using suppliers who are located closer to the Taichung facility for a number of materials and components. As of December 31, 2013 manufacturing operations at its Taiwan facility are limited. During the transition period, FOX will manufacture mountain bike suspension products at both the manufacturing facility in Watsonville, California and in Taichung, Taiwan, thereby providing dual manufacturing facilities and reducing the risk of interruptions. Management believes that the orderly transition of the majority of the mountain bike manufacturing operations from California to Taiwan should enable them to maintain FOX’s strict quality control standards, meet product demand requirements and relocate the majority of the manufacturing of its mountain bike products to a location (Taiwan) that is geographically close to a number of its mountain bike OEMs. It is estimated that sales to mountain bike OEMs located in Taiwan represented approximately 50% of total FOX sales to mountain bike OEMs in the year ended December 31, 2013.

Intellectual Property

FOX relies upon a combination of patents, trademarks, trade names, licensing arrangements, trade secrets, know-how and proprietary technology in order to secure and protect is intellectual property rights.

FOX diligently protects new technologies with patents and trademarks and defend against patent infringement allegations. As of December 31, 2013, FOX owned 37 patents on proprietary technologies related to vehicle suspension and other products and had approximately 82 patent pending applications on file in the U.S. and European Patent Offices. FOX’s principal intellectual property also includes its trademarks. FOX has more than 50 pending or registered trademarks in the U.S. and a number of international jurisdictions.

Regulatory Environment

Environmental—FOX’s manufacturing operations, facilities and properties in the United States and Taiwan are subject to evolving foreign, international, federal, state and local environmental and occupational health and safety laws and regulations, including those governing air emissions, wastewater discharge and the storage and handling of chemicals and hazardous substances. Failure to comply with such laws and regulations could subject FOX to significant fines, penalties, costs, liabilities or restrictions on operations.

FOX management believes that its operations are in compliance, in all material respects, with applicable environmental and occupational health and safety laws and regulations, and compliance with such laws and regulations has not had, nor is it expected to have, a material impact on earnings or competitive position. However, new requirements, more stringent application of existing requirements or the discovery of previously unknown environmental conditions could result in material environmental related expenditures in the future.

Consumer safety—FOX is subject to the jurisdiction of the United States Consumer Product Safety Commission, or the CPSC, and other federal, state and foreign regulatory bodies. Under CPSC regulations, a manufacturer of consumer goods is obligated to notify the CPSC, if, among other things, the manufacturer becomes aware that one of its products has a defect that could create a substantial risk of injury. If the manufacturer has not already undertaken to do so, the CPSC may require a manufacturer to recall a product, which may involve product repair, replacement or refund.

Employment—FOX is subject to numerous foreign, federal, state and local government laws and regulations governing its relationships with its employees, including those relating to minimum wage, overtime, working conditions, hiring and firing, non-discrimination, work permits and employee benefits. Management believes that FOX’s operations are conducted in compliance, in all material respects, with such laws and regulations.

Employees

As of December 31, 2013, FOX employed approximately 670 full-time employees in the United States, Europe and Taiwan. FOX also hires part-time employees at its manufacturing facilities to help meet seasonal demands. None of FOX’s employees are subject to collective bargaining agreements. FOX has never experienced a material work stoppage or disruption to its business relating to employee matters and believe that relationships with their employees is good.

Liberty Safe

Overview

Liberty Safe, headquartered in Payson, Utah and founded in 1988, is the premier designer, manufacturer and marketer of home, gun and office safes in North America. From its over 204,000 square foot manufacturing facility, Liberty Safe produces a wide range of home, office and gun safe models in a broad assortment of sizes, features and styles ranging from an entry level product to good, better and best products. Products are marketed under the Liberty Safe brand, as well as a portfolio of licensed and private label brands, including Remington, Cabela’s and John Deere. Liberty Safe’s products are the market share leader and are sold through an independent dealer network (“Dealer sales”) in addition to various sporting goods and home improvement retail outlets (“Non-Dealer sales” or “National sales”). Liberty Safe has the largest independent dealer network in the industry.

Historically approximately 60% of Liberty Safe’s sales are Non-Dealer sales and 40% are Dealer sales.

For the fiscal years ended December 31, 2013, 2012 and 2011, Liberty Safe had net sales of approximately $126.5 million, $91.6 million and $82.2 million (from date of acquisition), respectively, and operating income of $12.5 million, $6.0 million and $4.3 million in the years ended December 31, 2013, 2012 and 2011 respectively. Liberty Safe had total assets of $94.8 million, $82.4 million and $85.9 million at December 31, 2013, 2012 and 2011, respectively. Net sales from Liberty Safe represented 12.8%, 10.4% and 13.6% of our consolidated net sales for the year ended December 31, 2013, 2012 and 2011, respectively.

History of Liberty Safe

The Liberty Safe brand and its leading market share has been built over a 24 year history of superior product quality, engineering and design innovation, and leading customer service and sales support. Liberty Safe has a long history of continuous improvement and innovative approaches to sales and marketing, product development and manufacturing processes. Significant investments over the last five years have solidified Liberty Safe’s reputation for providing substantial value to retailers and enhanced its long-standing position as the leading producer of premium home, office and gun safes.

Liberty Safe commenced operations in 1988 and throughout 1991 and 1992, increased its distribution capabilities, establishing a regional sales force model to better serve the Dealer channel. This expanded sales coverage gave Liberty Safe the needed organizational structure to provide ready support and products nationwide, helping to establish its reputation for service to its customers. On the strength of its growing reputation and national sales presence, Liberty Safe achieved the status of the #1 selling safe company in America in 1994, according to Sargent and Greenleaf data, the major lock supplier to the industry, a position that it has maintained to this day. In 2001, Liberty Safe opened its current 204,000 square foot state-of-the-art facility in Payson, UT and consolidated all of its manufacturing and distribution operations to a centralized location. As the only facility in the industry utilizing significant automation and a streamlined roll-form manufacturing process, it represented a significant step forward when compared to the production capabilities of its competitors. Incremental investments following the consolidation have solidified Liberty Safe’s position as the pre-eminent low-cost and most efficient domestic manufacturer.

Beginning in 2007, Liberty Safe reorganized its manufacturing process, retooled its product line for increased standardization throughout the production process and realigned employee incentives to increase labor efficiency. These improvements enabled Liberty Safe to shift from build-to-stock production to build-to-order with shorter lead time requirements, greater labor efficiency and reduced working capital.

During 2011 Liberty Safe constructed a new production line that has allowed Liberty to build entry level safe products in- house. This production line produces home and gun safe models that were previously completely sourced through foreign manufacturers. The production line began operations in February 2012 and Liberty is currently manufacturing two different models of safes on this line which translates into five new SKUs. Liberty invested over $9.0 million to build the line. This investment in production capacity now makes Liberty Safe the largest manufacturer of home, office and gun safes in the world. This added investment in capacity in the U.S. will allow Liberty Safe to provide shorter lead times and more competitive pricing to its North American customer base. This will allow Liberty safe to capture additional market share, growing its revenue base and adding more margin dollars to the bottom line. In addition, Liberty Safe will be able to reduce its investment in inventory by no longer having to rely entirely upon long lead times associated with importing safes and the risk inherent in forecasting.

We purchased a majority interest in Liberty Safe on March 31, 2010.

Industry

Liberty Safe competes in the broadly defined North American safe industry which includes fire and document safes, media and data safes, depository safes, gun safes and cabinets, home safes and hotel safes. According to Global Industry Analysts, (“GIA”) March 2008 report, the global safe industry was estimated to be approximately $2.9 billion of wholesale sales in 2008, and grew consistently at an estimated CAGR of 4.3% from 2000 to 2009. Consistent growth has been one of the defining characteristics of this industry, and GIA anticipates it will continue at a rate of 4.4% from 2009 through 2015

Products & Services

Liberty Safe offers home, office and gun safes with retail prices ranging from $400 to $8,000.

Liberty Safe produces 39 home and gun safe models with the most varied assortment of sizes, feature upgrades, accessories and styling options in the industry. Liberty Safe’s premium home and gun safe product line covers sizes from 12 cu. ft. to 50 cu. ft. with smaller sizes available for its personal home safe. Liberty also imports over 40 home and gun safe models primarily for sales to Non-Dealer accounts. Liberty Safe markets its products under Company-owned brands and a portfolio of licensed and private label brands, including Remington, Cabela’s, John Deere and others. Liberty Safe also sells commercial safes, vault doors and a number of accessories and options. The overwhelming majority of revenue is derived from the sales of safes.

Competitive Strengths

#1 Premium Home and Gun Safe Brand with Strong Momentum in the Market—Liberty Safe achieved the status of #1 selling safe company in America in 1994 (per statistics provided by Sargent & Greenleaf, the primary lock supplier to the industry) and maintains this prominent position today. Management estimates that Liberty Safe’s net sales are over twice those of its next largest competitor in the category. Liberty Safe continues to gain market share from the various smaller participants who lack the distribution and sales and marketing capabilities of Liberty Safe.

State-of-the-Art and Scalable Operations—Over the past five years, management has constructed a highly scalable operational platform and infrastructure that has positioned Liberty Safe for substantial sales growth and enhanced profitability in the coming years. Liberty Safe transitioned itself from a manufacturing oriented operating culture to a demand-based, sales-oriented organization. It’s strategic transition required the implementation of a demand-based sales and operating platform, which included (i) new equipment to drive automation and capacity

improvements; (ii) reengineered product lines and production processes to drive efficiency through greater standardization in production; and (iii) new employee incentives tied to labor efficiency, which has improved worker performance as well as employee attitude. These initiatives are enhanced by an experienced senior executive team, a balanced sourcing and in-house manufacturing production strategy, advanced distribution capabilities and sophisticated IT systems. Liberty has combined its demand-based sales and operating initiatives with upgraded production equipment to drive multiple operational improvements. Since 2007, Liberty has reduced its lead times from 4 – 6 weeks to approximately seven days. These shorter production cycles coupled with better demand forecasting have significantly reduced working capital needs for the business by reducing domestic inventory from approximately 7,000 units to 3,000 units since 2007. During a period of 2013 lead times actually increased due to a significant spike in demand for safes from its customers. That demand spike subsided towards the end of fiscal 2013 where again, shorter lead times were experienced. Improved automation and workflow organization have decreased labor hours over 20% per safe from 8.3 in 2005 to 6.3 in 2012 for rolled steel safes. These recent initiatives combined with Liberty’s cumulative historical investments in operational capabilities have created a lasting competitive advantage over its smaller competitors, who utilize labor-intensive operations and lack the company’s lean manufacturing culture.

Historically, Liberty Safe maintained an optimal mix of in-house and Asian-sourced manufacturing in order to improve its ability to meet customer inventory needs. Beginning in 2012 Liberty Safe began manufacturing entry level safes that were previously completely sourced from an Asian manufacturer, on its new production line. In 2013, the market enjoyed unprecedented heightened demand related to gun sales resulting from threats of additional gun legislation. This caused Liberty Safe to reinstitute its import channel of safes. In 2013, approximately 82% of safes were made in the United States while the balance came from imported product. This was necessary as demand exceeded Liberty’s manufacturing capacity.

Liberty Safe has leased for the past ten years a manufacturing and distribution facility in Payson, Utah that management believes represents the most scalable domestic facility in the industry. Liberty Safe’s multi-faceted production capabilities allow for substantial flexibility and scalable capacity, thus assuring a level of supply chain execution far superior to any of its competitors.

Reputation for High Quality Products—Liberty Safe offers only the highest quality products on a consistent basis, which over the years has gained it an enviable reputation and a key point of differentiation from its competitors. Liberty Safe distinguishes its products through tested security and fire protection features and industry leading design focused on functionality and aesthetics. The design of its safes meet rigorous internal benchmarks for security and fire protection, with most receiving certification from Underwriters Laboratory, Inc. (“UL”), the leading product safety standard certification, for its security capabilities. Additionally, Liberty Safe’s investment in accessories and feature options have made Liberty safes the most visually appealing and functional in the industry, while providing more customized solutions for retailers and consumers.

Trusted Supplier to National Retailer and Dealer Accounts—Liberty Safe’s comprehensive, high-quality product offering and sophisticated sales and marketing programs have made it a critical supplier to a diverse group of national accounts and dealers. Initially a key supplier primarily to the dealer channel, it has expanded its business with national accounts, such as Gander Mountain, Cabela’s and True Value Hardware. Liberty Safe provides a superior value proposition as a supplier for its national retailers and dealers via its well-recognized brands, lifetime product warranty, tailored merchandising, category management solutions and superior supply chain execution. Further, Liberty Safe’s products generate more profitable floor-space, with both high absolute gross profit and retail margins over 30%. High retail profitability plus increased inventory turns has entrenched Liberty Safe as a key partner in customers’ success in the safe category. As a core element of building its relationships, Liberty Safe has invested significantly in making its retailers better salespeople through a proprietary suite of training tools, including in-store training, new product demonstrations, online education programs and sales strategy literature.

Business Strategies

Liberty Safe has experienced strong historical growth while executing on multiple new sales and operational initiatives, positioning it to continue to increase its scale and improve profitability. Liberty’s growth strategy is rooted in the sales and marketing and operational initiatives that have spurred its expansion into new accounts and increased penetration of existing accounts. Liberty has significant opportunity in its existing channels to continue to build upon its already strong market share. In addition to growth within its current channels, Liberty’s core competencies can be successfully applied to ventures in the broader security equipment market. Liberty has explored certain of these opportunities, but due to the prioritization of operational initiatives and expansion opportunities within existing channels, they have not been aggressively pursued. Potential near-to-medium term areas for expansion of Liberty’s platform include:

Research and Development

Liberty Safe is the engineering and design leader in its sector, due to a history of first-to-market features and standard-setting design improvements. Liberty’s proactive solicitation of feedback and constant interaction with consumers and retail customers across diverse channels and geographies enables Liberty Safe to stay at the forefront of customer demands. Liberty’s approach to product development increases the likelihood of market acceptance by creating products that are more relevant to consumers’ demands. Research and development costs were $0.7 million in 2013 and $0.8 million in each of the years 2012 and 2011.

The below charts represents some of the recent innovations in product design (and functionality) that have come about from Liberty’s dedication to R&D:

In addition to product enhancements, new products, such as theFatboy^® Series,have been launched from Liberty’s commitment to R&D.

Based on consumer feedback, Liberty saw demand for safes that were capable of holding more valuables within the safe but at a lower price point than Liberty’s current large safe models. Within 3 months of conception, Liberty introduced the successfulFatboy^® series in February 2010. TheFatboy^® andFatboy Jr.^® models, which are wider and deeper than traditional safes, were a natural complement to Liberty’s current products, targeted at a specific customer need. The introduction and success of theFatboy^® series demonstrates Liberty’s proven ability to recognize market opportunities, engineer a responsive product and execute market delivery. Beginning in 2012 Liberty Safe introduced five new SKUs, manufactured on its new production line, with a unique locking system to service the entry level safe market. This line was responsible for approximately $15 million in 2013 sales.

Customers

Liberty Safe has fostered long-term relationships with leading national retailers (National or Non-Dealer) as well as numerous Dealers, enabling Liberty Safe to achieve considerable brand awareness and channel exposure. Traditionally, the Dealer channel has accounted for the majority of the Liberty Safe’s sales, but through significant investment in its national accounts sales and marketing efforts, Liberty Safe has also become the leading supplier to National accounts. Expansion into National accounts is part of Liberty Safe’s strategy to reach a broader customer base and more varied demographics. National account customers include sporting goods retailers, farm & fleet retailers, home improvement retailers and club retailers. As of December 31, 2013, 2012 and 2011, Liberty Safe had 15, 16 and 16 Non-Dealer account customers, respectively, that are estimated to have accounted for approximately 59%, 57% and 61% of net sales, respectively.

Dealer customers include local hunting and fishing stores, hardware stores and numerous other local, independent store models. As of December 31, 2013, 2012 and 2011, there were 306, 343 and 325 Dealers that accounted for 41%, 43% and 39% of net sales, respectively.

Liberty Safe’s largest customer accounted for approximately 18.0%, 15.0% and 13.2% of net sales in 2013, 2012 and 2011, respectively.

Sales & Marketing

Liberty Safe possesses robust sales and marketing capabilities in the safe industry. Liberty Safe utilizes separate sales teams for National accounts and Dealers, which enables it to provide more focused and effective strategies to manage and develop relationships within different channels. Liberty Safe has made significant recent investments in the development of a comprehensive sales and marketing program including merchandising, sales training and tools, promotions and supply chain management. Through these various initiatives, Liberty Safe offers highly adaptable programs to suit the varying needs of its retailers. This has enabled Liberty Safe to become a key supplier across diverse channels. Liberty Safe began advertising nationally on the Glenn Beck radio show in the second half of 2010. This advertising has been highly successful and Liberty has continued this advertising in each of the following years and intends on continuing this advertisement in the future.

Liberty Safe’s comprehensive service offering makes it uniquely suited to service national retailers in a variety of channels. Liberty Safe has designed a Store-within-a-Store program and a more comprehensive Safe Category Management program to build relationships and increase its importance to retailers. Primarily utilized with sporting goods retailers, the Store-within-a-Store concept successfully integrates the effective sales strategies of its dealers for selling a high-price point, niche product into a larger store format. Centered on communicating the benefits of its products to customers, the program enables retailers to more effectively up-sell customers through a good-better-best merchandising platform, increasing margin and inventory turns for its retailers. Liberty’s Safe Category Management program builds on the Store-within-a-Store concept to provide greater sales and marketing control and more complete inventory management solutions. This program facilitates Liberty Safe becoming the sole supplier to retailers, providing large incremental expansion and stronger relationships at accounts. No other market participant has the capabilities to provide a comprehensive suite of customer service solutions to national retailers, such as customized SKU programs, a Store-within-a-Store program and a Safe Category Management program. Liberty’s sales are typically lowest in the second fiscal quarter due to lower demand for safes at the onset of summer, although this was not the case in 2013 due to significant sales backlog experienced throughout the year.

Competition

Liberty Safe is the premier brand in the premium home and gun safe industry, with an estimated 34% market share in the category. Liberty is in a class by itself when it comes to manufacturing technology and efficiency an d supply chain capabilities. Competitors are generally more heavily focused on either smaller, sourced safes or large, domestically produced safes. Competitive domestic manufacturers run “blacksmith” type factories that are small, inefficient and require a tremendous amount of manual labor that produces inconsistent product. In addition, many of Liberty’s competitors are directly tied to a third-party brand, such as Browning, Winchester or RedHead / Bass Pro.

Liberty competes with other safe manufacturers based on price, breadth of product line, technology, product supply chain capabilities and marketing capabilities.

Channel diversity in the premium home and gun safe industry is rare, with most companies having greater concentration in either the dealer channel or national accounts, but rarely having the supply chain capabilities or sales and marketing programs to service both channels effectively such as Liberty Safe does. Major competitors have limited sales and marketing departments and programs, making it difficult for them to expand sales and gain market share.

Suppliers

Liberty’s primary raw materials are steel, sheetrock, wood, locks, handles and fabric, for which it receives multiple shipments per week. Materials, on average, account for approximately 65% of the total cost of a safe, with steel accounting for approximately 55% of material costs. Liberty purchases its materials from a combination of domestic and foreign suppliers. Historically, Liberty Safe has been able to pass on raw material price increases to its customers.

Liberty purchased over 39 million pounds of steel in 2013 primarily from domestic suppliers, using contracts that lock in prices two to three fiscal quarters in advance. Liberty Safe purchases coiled and flat steel in gauges from four to 14. Liberty Safe specifies rigorous requirements related to surface and edge finish and grain direction. All steel products are checked to ASTM specification and dimensional tolerances before entering the production process.

In 2013 Liberty Safe re-established its relationship with its former Asian supplier of safes due to unprecedented demand for product from its customers. Liberty’s manufacturing facility could not keep up with the demand. As a result approximately 18% of 2013 safe sales were from import product. Management expects this to decrease in the future as overall demand is expected to decrease.

Liberty Safe had approximately $9.1 million and $13.2 million in firm backlog orders at December 31, 2013 and 2012, respectively.

Intellectual Property

Liberty Safe relies upon a combination of patents and trademarks in order to secure and protect its intellectual property rights.

Liberty Safe currently owns 25 trademarks and 2 patents on proprietary technologies for safe products.

Regulatory Environment

Liberty Safes’ management believes that Liberty Safe is in compliance with applicable environmental and occupational health and safety laws and regulations. Liberty Safe has recently moved to a powder paint application in order to reduce hazardous VOC emissions.

Employees

As of December 31, 2013, Liberty Safe had over 400 full-time employees and 112 temporary employees. Liberty’s labor force is non-union. Management believes that Liberty Safe has an excellent relationship with its employees.

Niche Industrial Businesses

Advanced Circuits

Overview

Advanced Circuits, headquartered in Aurora, Colorado, is a provider of prototype, quick-turn and production rigid PCBs, throughout the United States. Advanced Circuits also provides its customers with assembly services in order to meet its customers’ complete PCB needs. The prototype and quick-turn portions of the PCB industry are characterized by customers requiring high levels of responsiveness, technical support and timely delivery. Due to the critical roles that PCBs play in the research and development process of electronics, customers often place more emphasis on the turnaround time and quality of a customized PCB than on the price. Advanced Circuits meets this market need by manufacturing and delivering custom PCBs in as little as 24 hours, providing customers with over 98% error-free production and real-time customer service and product tracking 24 hours per day. In each of the years 2013, 2012 and 2011, and 2010, approximatelyover 60%, 63% and 64% of Advanced Circuits’ sales were derived from highly profitable prototype and quick-turn production PCBs. Advanced Circuits’ success is demonstrated by its broad base of over 11,000 customers with which it does business throughout the year. These customers represent numerous end markets, and for each of the years ended December 31, 2012, 2011 and 2010, no single customer accounted for more than 2% of net sales. Advanced Circuits’ senior management, collectively, has approximately 90 years of experience in the electronic components manufacturing industry and closely related industries.

For the full fiscal years ended December 31, 2013, 2012 2011 and 2010,2011, Advanced Circuits had net sales of approximately $87.4 million, $84.1 million $78.5 million and $74.5$78.5 million, respectively and operating income of $22.9 million, $24.0 million $26.6 million and $20.4$26.6 million, respectively. Advanced Circuits had total assets of $84.7 million, $91.4 million $88.7 million and $92.0$88.7 million at December 31, 2013, 2012 2011 and 2010,2011, respectively. Net sales from Advanced Circuits represented 9.5%8.9%, 12.9%9.5%, and 14.8%12.9% of our consolidated net sales for the years 2013, 2012 and 2011, and 2010, respectively.

History of Advanced Circuits

Advanced Circuits commenced operations in 1989 through the acquisition of the assets of a small Denver based PCB manufacturer, Seiko Circuits. During its first years of operations, Advanced Circuits focused exclusively on manufacturing high volume, production run PCBs with a small group of proportionately large customers. In 1992, after the loss of a significant customer, Advanced Circuits made a strategic shift to limit its dependence on any one customer. As a result, Advanced Circuits began focusing on developing a diverse customer base, and in particular, on providing research and development professionals at equipment manufacturers and academic institutions with low volume, high margin, customized prototype and quick-turn PCBs.

In 1997, Advanced Circuits increased its capacity and consolidated its facilities into its current headquarters in Aurora, Colorado. In 2003, to support its growth, Advanced Circuits expanded its PCB manufacturing facility by approximately 37,000 square feet or approximately 150%. In 2013 Advanced Circuits added approximately 50,000 square feet and moved its administrative and engineering group next door to its production facilities.

In March 2010, Advanced Circuits acquired Circuit Express, Inc. (“CEI”) for approximately $16.1 million. Based in Tempe, Arizona and founded in 1987, CEI focuses on quick-turn and prototype manufacturing of rigid PCBs primarily for the aerospace and defense related industry customers. CEI also specializes in expedited delivery in as fast as 24 hours. CEI reported net sales of approximately $16.4 million in 2010 and $18.7 million for the full fiscal 2011 year.

On May 23, 2012, Advanced Circuits acquired Universal Circuits, Inc. (“UCI”) for approximately $2.3 million. Universal CircuitsUCI supplies PCBs to major military, aerospace, and medical original equipment manufacturers and contract manufacturers. UCI’s Minnesota facility meets certain Department of Defense clearance requirements and is noted for custom and advanced technologies. Universal Circuits’ sales are primarily in the long-lead sector.

We purchased a controlling interest in Advanced Circuits on May 16, 2006.

Industry

The PCB industry, which consists of both large global PCB manufacturers and small regional PCB manufacturers, is a vital component to all electronic equipment supply chains, as PCBs serve as the foundation for virtually all electronic products, including cellular telephones, appliances, personal computers, routers, switches and network servers. PCBs are used by manufacturers of these types of electronic products, as well as by persons and teams engaged in research and development of new types of equipment and technologies.

In contrast to global trends, however, productionProduction of PCBs in North America has declined since 2000 and is expected to grow slightly over the next several yearsshow flat to modest growth in fiscal 2014 according to the IPC 20102013 Analysis. The rapid decline in United States production was caused by (i) reduced demand for and spending on PCBs following the technology and telecom industry decline in early 2000; and (ii) increased competition for volume production of PCBs from Asian competitors benefiting from both lower labor costs and less restrictive waste and environmental regulations. While Asian manufacturers have made large market share gains in the PCB industry overall, prototype and quick-turn production, some of the more complex volume production and military production have remained strong in the United States.

Both globally and domestically, the PCB market can be separated into three categories based on required lead time and order volume:

These categories can be further distinguished based on board complexity, with each portion facing different competitive threats. Advanced Circuits competes largely in the prototype and quick-turn production portions of the North American market, which have not been significantly impacted by the Asian based manufacturers due to the quick response time required for these products. Management believes the North American PCB market is estimated to be approximately $3.5 billion in 2012.2014.

Several significant trends are present within the PCB manufacturing industry, including:

high-volume production orders has placed increased pricing pressure and margin compression on many small domestic manufacturers that are no longer operating at full capacity. Many of these small producers are choosing to cease operations, rather than operate at a loss, as their scale, plant design and customer relationships do not allow them to focus profitably on the prototype and quick-turn sectors of the market.

Products and Services

A PCB is comprised of layers of laminate and contains patterns of electrical circuitry to connect electronic components. Advanced Circuits typically manufactures 2 to 20 layer PCBs, and has the capability to manufacture up even higher layer PCBs. The level of PCB complexity is determined by several characteristics, including size, layer count, density (line width and spacing), materials and functionality. Beyond complexity, a PCB’s unit cost is determined by the quantity of identical units ordered, as engineering and production setup costs per unit decrease with order volume, and required production time, as longer times often allow increased efficiencies and better production management. Advanced Circuits primarily manufactures lower complexity PCBs.

To manufacture PCBs, Advanced Circuits generally receives circuit designs from its customers in the form of computer data files emailed to one of its sales representatives or uploaded on its interactive website. These files are then reviewed to ensure data accuracy and product manufacturability. While processing these computer files, Advanced Circuits generates images of the circuit patterns that are then physically developed on individual layers, using advanced photographic processes. Through a variety of plating and etching processes, conductive materials are selectively added and removed to form horizontal layers of thin circuits, called traces, which are separated by insulating material. A finished multilayer PCB laminates together a number of layers of circuitry. Vertical connections between layers are achieved by metallic plating through small holes, called vias. Vias are made by highly specialized drilling equipment capable of achieving extremely fine tolerances with high accuracy.

Advanced Circuits assists its customers throughout the life-cycle of their products, from product conception through volume production. Advanced Circuits works closely with customers throughout each phase of the PCB development process, beginning with the PCB design verification stage using its unique online FreeDFM.com tool, FreeDFM.com^TM, which was launched in 2002, enables customers to receive a free manufacturability assessment

report within minutes, resolving design problems that would prohibit manufacturability before the order process is completed and manufacturing begins. The combination of Advanced Circuits’ user-friendly website and its design verification tool reduces the amount of human labor involved in the manufacture of each order as PCBs move from Advanced Circuits’ website directly to its computer numerical control, or CNC, machines for production, saving Advanced Circuits and customers cost and time. As a result of its ability to rapidly and reliably respond to the critical customer requirements, Advanced Circuits generally receives a premium for their prototype and quick-turn PCBs as compared to volume production PCBs.

Advanced Circuits manufactures all high margin prototypes and quick-turn orders internally but often utilizes external partners to manufacture production orders that do not fit within its capabilities or capacity constraints at a given time. As a result, Advanced Circuits constantly adjusts the portion of volume production PCBs produced internally to both maximize profitability and ensure that internal capacity is fully utilized.

The following table shows Advanced Circuits’ gross revenue by products and services for the periods indicated:

Gross Sales by Products and Services⁽¹⁾

Competitive Strengths

Advanced Circuits has established itself as a leading provider of prototype and quick-turn PCBs in North America and focuses on satisfying customer demand for on-time delivery of high-quality PCBs. Advanced Circuits’ management believes the following factors differentiate it from many industry competitors:

Business Strategies

Advanced Circuits’ management is focused on strategies to increase market share and further improve operating efficiencies. The following is a discussion of these strategies:

Research and Development

Advanced Circuits engages in continual research and development activities in the ordinary course of business to update or strengthen its order processing, production and delivery systems. By engaging in these activities, Advanced Circuits expects to maintain and build upon the competitive strengths from which it benefits currently. Research and development expenses were not material in each of the years 2012, 2011 and 2010.last three years.

Customers

Advanced Circuits’ focus on customer service and product quality has resulted in a broad base of customers in a variety of end markets, including industrial, consumer, telecommunications, aerospace/defense, biotechnology and electronics manufacturing. These customers range in size from large, blue-chip manufacturers to small, not-for-profit university engineering departments. The following table sets forth management’s estimate of Advanced Circuits’ approximate customer breakdown by industry sector for the fiscal years ended December 31, 2013, 2012 2011 and 2010:2011:

Management estimates that over 90% of its orders are generated from existing customers. Moreover, approximately two-thirdsmore than half of Advanced Circuits’ orders in each of the years 2013, 2012 2011 and 20102011 were delivered within five days (not including CEI orders.) One customer represented approximately 4.5% of Advanced Circuits sales in 2013. No other customer represents more than 2% of Advanced Circuits’ sales.

Sales and Marketing

Advanced Circuits has established a “consumer products” marketing strategy to both acquire new customers and retain existing customers. Advanced Circuits uses initiatives such as direct mail postcards, web banners, aggressive pricing specials and proactive outbound customer call programs as part of this strategy. Advanced Circuits spends approximately 1% of net sales each year on its marketing initiatives and advertising and has 5759 employees dedicated to its marketing and sales efforts. These individuals are organized geographically and each is responsible for a region of North America. The sales team takes a systematic approach to placing sales calls and receiving inquiries and, on average, will place over 250200 outbound sales calls and receive approximately 140 inbound phone inquiries per day. Beyond proactive customer acquisition initiatives, management believes a substantial portion of new customers are acquired through referrals from existing customers. In addition, other customers are acquired over the interneton-line where Advanced Circuits generates over 90% of its orders from its website.

Once a new client is acquired, Advanced Circuits offers an easy to use customer-oriented website and proprietary online design and review tools to ensure high levels of retention. By maintaining contact with its customers to ensure satisfaction with each order, Advanced Circuits believes it has developed strong customer loyalty, as demonstrated by over 90% of its orders being received from existing customers. Included in each customer order is an Advanced Circuits pre-paid “bounce-back” card on which a customer can evaluate Advanced Circuits’ services and send back any comments or recommendations. Each of these cards is read by senior members of management, and Advanced Circuits adjusts its services to respond to the requests of its customer base.

Substantially all revenue is derived from sales within the United States.

Advanced Circuits, due to the volume of prototype and quick turn sales, had a negligible amount in firm backlog orders at December 31, 20122013 and 2011.2012.

Competition

There are currently an estimated 250238 active domestic PCB manufacturers. Advanced Circuits’ competitors differ amongst its products and services.

Competitors in the prototype and quick-turn PCBs production industry include larger companies as well as small domestic manufacturers. The two largest independent domestic prototype and quick-turn PCB manufacturers in North America are TTM Technologies, Inc. and Viasystems Group, Inc. Though each of these companies produces prototype PCBs to varying degrees, in many ways they are not direct competitors with Advanced Circuits. In recent years, each of these firms has primarily focused on producing boards with greater complexity in response to the off shoring of low and medium layer count technology to Asia. Compared to Advanced Circuits, prototype and quick-turn PCB production accounts for much smaller portions of each of these firm’s revenues. Further, these competitors often have much greater customer concentrations and a greater portion of sales through large electronics manufacturing services intermediaries. Beyond large, public companies, Advanced Circuits’ competitors include numerous small, local and regional manufacturers, often with revenues under $20 million that have long-term customer relationships and typically produce both prototype and quick-turn PCBs and production PCBs for small OEMs and EMS companies. The competitive factors in prototype and quick-turn production PCBs are response time, quality, error-free production and customer service. Competitors in the long lead-time production PCBs generally include large companies, including Asian manufacturers, where price is the key competitive factor.

New market entrants into prototype and quick-turn production PCBs confront substantial barriers including significant investments in equipment, highly skilled workforce with extensive engineering knowledge and compliance with environmental regulations. Beyond these tangible barriers, Advanced Circuits’ management believes that its network of customers, established over the last two decades, would be very difficult for a competitor to replicate.

Suppliers

Advanced Circuits’ raw materials inventory is small relative to sales and must be regularly and rapidly replenished. Advanced Circuits uses a just-in-time procurement practice to maintain raw materials inventory at low levels. Additionally, Advanced Circuits has established consignment relationships with several vendors allowing it to pay for raw materials as used. Because it provides primarily lower-volume quick-turn services, this inventory policy does not hamper its ability to complete customer orders. Raw material costs constituted approximately 20%21%, 17.8%20% and 17.9%18% of net sales for each of the fiscal years ended December 31, 2013, 2012 2011 and 2010,2011, respectively.

The primary raw materials that are used in production are core materials, such as copper clad layers of glass and chemical solutions, and copper and gold for plating operations, photographic film and carbide drill bits. Multiple suppliers and sources exist for all materials. Adequate amounts of all raw materials have been available in the past, and Advanced Circuits’ management believes this will continue in the foreseeable future. Advanced Circuits works closely with its suppliers to incorporate technological advances in the raw materials they purchase. Advanced Circuits does not believe that it has significant exposure to fluctuations in raw material prices. The fact that price is not the primary factor affecting the purchase decision of many of Advanced Circuits’ customers has allowed management to historically pass along a portion of raw material price increases to its customers. Advanced Circuits does not knowingly purchase material originating in the Democratic Republic of the Congo or adjoining countries.

Intellectual Property

Advanced Circuits seeks to protect certain proprietary technology by entering into confidentiality and non-disclosure agreements with its employees, consultants and customers, as needed, and generally limits access to and distribution of its proprietary information and processes. Advanced Circuits’ management does not believe that patents are critical to protecting Advanced Circuits’ core intellectual property, but, rather, its effective and quick execution of fabrication techniques, its websiteFreeDFM.com^TM and its highly skilled workforce are the primary factors in maintaining its competitive position.

Advanced Circuits uses the following brand names:FreeDFM.com^TM,4pcb.com^TM,4PCB.com^TM,33each.com^TM,barebonespcb.com^TM andAdvanced Circuits^TM. These trade names have strong brand equity and are material to Advanced Circuits’ business.

Regulatory Environment

Advanced Circuits’ manufacturing operations and facilities are subject to evolving federal, state and local environmental and occupational health and safety laws and regulations. These include laws and regulations governing air emissions, wastewater discharge and the storage and handling of chemicals and hazardous substances. Management believes that Advanced Circuits is in compliance, in all material respects, with applicable environmental and occupational health and safety laws and regulations. New requirements, more stringent application of existing requirements, or discovery of previously unknown environmental conditions may result in material environmental expenditures in the future. Advanced Circuits has been recognized three times for exemplary environmental compliance as it was awarded the Denver Metro Wastewater Reclamation District Gold Award for the seven of the last ten years.

Employees

As of December 31, 2012,2013, Advanced Circuits employed 517519 persons. Of these employees, there were 5759 in sales and marketing. None of Advanced Circuits’ employees are subject to collective bargaining agreements. Advanced Circuits believes its relationship with its employees is good.

American Furniture

Overview

American Furniture, headquartered in Ecru, Mississippi, is a low cost manufacturer of upholstered furniture sold to large-scale furniture distributorsmajor and mid-sized retailers. American Furniture operates almost exclusively in the promotionalpromotional-to-moderate priced upholstered segment of the furniture industry, which is characterized by affordable prices, standardfresh designs and immediate availabilityfast delivery to retail consumers.the retailers. American Furniture was founded in 1998. American Furniture’s products are adapted from established designs in the following1998 and focuses on three product categories: (i) stationary, (ii) motion (reclining sofas/loveseats) and (iii) recliner and (iv) other related products including accent tables and rugs. American Furniture’s products are manufactured from common components and offer proven select fabric options, providing manufacturing efficiency and resulting in limited design risk.recliners.

For the full fiscal years ended December 31, 2013, 2012 2011 and 2010,2011, American Furniture had net sales of approximately $104.9 million, $91.5 million and $105.3 million, respectively, and $136.9operating income of $0.2 million, respectively, and operating losses of $1.5 million $35.2 million and $37.1$35.2 million, respectively. American Furniture had total assets of $43.8 million, $32.3 million $30.0 million and $78.4$30 million at December 31, 2013, 2012 2011 and 2010,2011, respectively. Net sales from American Furniture represented 10.3%10.6%, 17.4%10.3% and 27.1%17.4% of our consolidated net sales for the years ended December 31, 2013, 2012 and 2011, respectively.

For the year ended December 31, 2011 net sales at American Furniture declined $31.6 million, which represents a 23% decline over 2010 sales. In addition, write downs to goodwill, other intangible assets and property, and equipment totaled $27.8 million and $38.8 million in the years 2011 and 2010, respectively. In all cases, the write downs were triggered by a significant deterioration in American Furniture’s operations and profitability caused by the unprecedented drop in the promotional furniture market and demand for its product. The combination of increased unemployment, together with significant decreases in home purchases, availability of consumer credit and rising fuel costs has created a depressed market for promotional furniture sales over the last several years than has been experienced over the last two decades.

History of American Furniture

American Furniture was founded in 1998 with an exclusivea focus on promotional upholstered furniture, offering a unique value proposition combining consistent high-quality, attractively priced products and 48-hour quick-ship service.quick delivery/service to its’ customers. AFM began operations with four assembly lines housed in a 60,000 sq. ft. facility. By 2002, American Furniture had achieved revenues in excess of $120 million and grew operations into a 600,000 sq. ft. facility in Houlka, MS. In 2004, American Furniture was sold by its founder to a group of private investors who installed a new management structure and hired a new executive team and grew American Furniture’s administrative infrastructure in order to build a solid foundation to support future growth. In 2005, American Furniture aggressively pursued Asian sourcing for fabrics and other assorted materials. Today American Furniture is a leading manufacturer of promotional upholstered furniture operating from an approximately 1.1 million sq. ft. manufacturing and warehouse facility.

For the year ended December 31, 2011 net sales at American Furniture declined $31.6 million, which represents a 23% decline over 2010 sales. In addition, write downs to goodwill, other intangible assets and property, and equipment totaled $27.8 million and $38.8 million in the years 2011 and 2010, respectively. In all cases, the write downs were triggered by a significant deterioration in American Furniture’s operations and profitability caused by the unprecedented drop in the promotional furniture market and demand for its product. The combination of increased unemployment, together with significant decreases in home purchases, availability of consumer credit and rising fuel costs has created the worst market for promotional furniture sales over the last two years than has been experienced over the last two decades.

During 2011, American Furniture implemented a revised standard costing system which required American Furniture to reclassify certain costs between cost of sales and selling, general and administrative expenses. The change in format consists of reclassifying the trucking fleet expenses from selling, general and administrative expenses into cost of sales, as well as re-classifying certain manufacturing related expenses included in rent, insurance, utilities and workers comp from selling, general and administrative costs to cost of sales. Management believes that the format of reporting cost of sales together with the revised standard costing system and the revaluation of standard costs allows management to react timely to changes in supply costs, product demand and overall price structure going forward, which in turn eliminated the accumulation of lower margin product and allowallowed for more advantageous product procurement and the proper utilization of available assets. In addition, American Furniture enlisted the assistance of an outside consulting firm in 2011 to assist them in right-sizing its operations in order to operate more efficiently and respond to the significantly changed promotional furniture marketplace. To that end, American Furniture has outsourced the majority of delivery and its trucking operations as well as sub-contracted its frame cutting process during 2012.process.

We acquired a controlling interest in American Furniture on August 31, 2007.

Industry

AFM is a manufacturer of upholstered furniture serving the promotional segment of the U.S. furniture industry. Overall conditions for the furniture industry have been difficult over the past twoseveral years. New housing starts are down significantly and consumers continue to be faced with general economic uncertainty fueled by deteriorating consumer credit markets, rising fuel costs and lagging consumer confidence as a result of erratic financial markets. All of this has significantly impacted big ticket consumer purchases such as furniture over the last several years.

AFM participates largelyexclusively in the promotional to moderate priced upholstered furniture industry. Within the U.S. residential retail furniture marketplace, products are typically positioned in the “promotional”, “good”, “better”, or “best” category. The scale of the categories is intended to reflect an increasing level of quality, appearance and corresponding price. At the wholesale level, the promotional to moderate priced segment of the upholstered furniture industry we believe accounts for over $3$5.0 billion in sales. Promotional to moderate priced upholstered furniture manufacturers typically offer a limited range of products in a discrete number of styles and/or designs, allowing immediate delivery to retail customers at well-established retail price points. Specifically, promotional upholstered furniture is generally priced by product at the retail level from $199 for recliners and up to $1,500 for motion sectionals.

The popularity of promotional furniture is attributable to (i) the segment’s consistent product quality (based on focused manufacturing onof a few key furniture pieces), and (ii) its value pricing, which appeals to the broadest cross-section of the furniture consumers.

AFM competes exclusively in the promotional to moderate priced segment, selling upholstered furniture in both the stationary and motion categories. In the retail furniture landscape, promotional furniture can be a growing catalyst of floor traffic and sales volumes for mass market furniture retailers. The moderate category allows for adding additional floor space on current dealer floors with better margins. Recurring promotional programs have often become core to retailer strategies given its immediate availability to customers and just-in-time strategies employed within the industry which limit retailer inventory requirements.

Within the wholesale market, wholesale shipments from Asian suppliers, we believe, have grown steadily as a percent of total wholesale shipments. Asian upholstered imports have grown significantly in the past ten years. We believe their impact on AFM has been far less than the industry as a whole within the promotional upholstered furniture, due to the low price points and resulting shipping costs as a percent of a piece’s total value.

Off-shore Imports

Furniture manufactured in Asia emerged as an important driver of the U.S. residential furniture market beginning in the mid-1990s. While off-shore manufacturers, particularly Chinese and Vietnamese manufacturers, have affected the entire industry, the import trend, has impacted different segments of the industry at varying levels.

Case-goods and metal furniture have proven to be more susceptible to Asian competition than upholstered furniture, due to the stack ability and assembly characteristics, resulting in efficient freight consolidation. Upholstered furniture cannot be broken down and shipped efficiently to the U.S. such that the resulting freight costs tend to outweigh the labor and material savings achieved through offshore manufacturing. As a result, domestic upholstered manufacturers have largely managed to compete effectively against Asian competitors when compared to other segments of the furniture industry. In addition, manufacturers in the promotional segment of the upholstered industry are even further insulated from offshore competition due not only to overall freight costs but also freight costs when compared to wholesale price of the product together with the prolonged lead-times to retailers and end customers in a market segment characterized by very short lead-times and immediate delivery to the end consumer.

Retail price points in the promotional segment of the upholstered industry range from $199 –- $1,500, whereas shipping costs from Asia on a per piece basis are generally in excess of $100 per piece ($3,000 –- $4,000) per standard 40 foot container not including domestic shipping and insurance costs.

In addition to the increased cost, leadLead times also hinder Asian manufacturers’ ability to effectively compete in the promotional upholstered industry. As mentioned previously, retailersRetailers use promotional furniture to drive store traffic and provide immediate delivery to the end-user of value-priced, quality upholstered furniture products. AFM aims to ship customer orders 48 hourson time following receipt of an order with delivery occurring 1 – 3 days laterand has the ability to deliver product within a customers requested ship date depending on the customers’ location within the U.S. Asian manufacturers typically require at least 50 days (or 7 – 8 weeks depending on business days) from order receipt to customer delivery, resulting in a significant amount of increased inventory management and advertising planning in order to effectively source upholstered product from overseas manufacturers.

Products and Services

AFM manufactures two basic categories of promotional and moderate priced upholstered products, stationary and motion. Stationary products include sofas, loveseats and sectionals, these products accounted for approximately 72%68%, 75%72% and 70%75% of sales in fiscal 2013, 2012 2011 and 2010,2011, respectively. Motion products include single rocking recliner chairs, sofas with reclining end seats, loveseats with seats that rock together or separately and reclining sectionals with storage compartments. Motion and reclining products contributed approximately 27%28%, 23%27% and 25%23% of fiscal 2013, 2012 2011 and 20102011 gross sales, respectively. Beginning in 2005, AFM added a line of imported rugs and accent tables to its product mix to provide customers with complimentary accessory offering to AFM’s core furniture lines. For 2013, 2012 2011 and 2010,2011, accent tables and other miscellaneous revenue accounted for less than 2% of gross sales. AFM’s core product offerings with average retail prices are summarized below:

AFM’s products utilize common components and frames with limited fabric options, allowing AFM to reproduce established styles at value prices. Since its inception, AFM has continuously introduced new styles which typically replace older designs and are primarily slight variations to existing products. AFM builds its products to stock and maintains adequate inventory levels to facilitate shipment to customers on time. AFM’s quick-ship strategy allows customers to better manage inventory and product promotions, yet maintain the ability to provide immediate availability to retail customers, a key attribute within the promotional furniture segment of the furniture industry.

Product Development

AFM can re-engineer a new design, create a prototype and begin to solicit customer feedback within two weeks. AFM carefully controls its product line such that new styles typically replace older designs. As a result, AFM requires up to 120 days to wind-down a discontinued line and beginning shipping truckload quantities of new designs to customers.

Manufacturing

AFM utilizes an assembly-line manufacturing process with a four day production cycle divided into four functions, cutting, sewing, backfill and upholstery. Employees are specialized by function and are compensated on a piece-rate basis. The limited number of styles and designs minimizes scheduling and line changes and each function is simplified by the use of common components. AFM uses one standard seat spring, one standard back spring and one standard cushion in each category of upholstery. AFM’s piece-rate compensation plan and streamlined manufacturing process combine to give AFM a low cost structure. Prior to 2009, American Furniture utilized pre-assembled cut and sewn fabric kits for approximately 20% of its upholstered furniture. These fabric kits replace the cutting and sewing function in the manufacturing process. Over the past several years AFM has increased the use of these fabric kits and as of December 31, 20122013 virtually all of the upholstered furniture that it manufactures used the imported cut and sewn fabric kit. The use of these fabric kits reduces the labor component related to the cutting and sewing process in-house. Theses fabric kits are imported from Asia. American Furniture also eliminated its in-house frame cutting operations in 2012 and currently 100% of the frames for upholstered furniture are cut by third party providers.

AFM currently delivers the majority of its products through third-party freight service providers. Freight costs are generally paid by the customer, including fuel surcharges. AFM utilized third-party freight providers for approximately 80% of its customer shipments in 2011 and 2010over the last three years compared to approximately 50% or lower in prior years. We estimate that this saved approximately $1.0 million in 2010 and 2011 in overall freight costs when this strategy was first instituted. American Furniture eliminated its in-house trucking operations in 2012.

Competitive Strengths

We believeManagement believes that AFM is among the lowest-cost domestic manufacturers of promotional to moderate priced upholstered furniture. AFM maintains a competitive cost basis through an assembly-line production model and build-to-stock strategy. Specifically, AFM generates economies of scale through:

In addition, managementManagement has aligned AFM’s high-volume manufacturing strategy with a piece-rate incentive structure for its direct labor force. This structure drives workforce productivity. The incentive system also provides floor personnel with the opportunity to earn annual compensation at or above local standards, thereby facilitating AFM’s recruiting and retention efforts.

AFM’s efficient build-to-stock manufacturing operation facilitates AFM’s strategy of offering its customers on – time–time shipment of product. In turn, AFM’s customers are able to offer their retail customers quality, value-priced, upholstered furniture for immediate delivery upon the day of sale, while only maintaining limited quantities of product inventory.

AFM serves a diverse base of approximately 700 customers. Within its broader customer base, AFM specifically targets independent furniture retailers at the national, multi-regional and regional levels. AFM’s value proposition and the ability to ship most products within 48 hours,their customers’ time frame, is highly valued by this segment of the marketplace that focuses broadly on demographic segments that demand immediate delivery of popular styles at competitive prices.

Barriers to Significant Asian Competition

The availability of low-cost Asian products has had a far-reaching impact on the broader home furnishings market in the United States over the past ten years, contrasted to manufacturers serving other segments. Until recently, AFM has had minimal exposure to off-shore competition due to the following:

Recently, weAFM has have begun to see more competition in the motion product category from imported Asian product. These products typically offer customers better value in terms of construction and price when compared to our motion product. OurAFM’s margin for motion product has typically been less than stationary.

Business Strategies

Customers

AFM serves a base of approximately 700 customers comprised of retailers and distributors at the regional, multi-regional and national levels. In 2013, 2012 2011 and 2010,2011, AFM’s top 20 customers accounted for approximately 67%70%, 66%67% and 67%66%, respectively, of AFM’s total sales. In 2012 two customers (Value City and Big Lots) each accounted for approximately 12% of gross sales.

Sales and Marketing

AFM has a sales force consisting of independent, outside representatives that exclusively sell AFM’s products in an assigned geographic territory of up to six states. Sales representatives are compensated on a 100% commission basis. AFM maintains two permanent showrooms in High Point, NC and Tupelo, MS,Las Vegas, NV, host cities for furniture industry trade shows (High Point in April and October and TupeloLas Vegas in January and August)July).

American Furniture’s business is seasonal. Net sales have historically been higher in the period of January through April of each fiscal year. We believe this seasonality is due in part to consumer demand increasing resulting from income tax refunds. Substantially all revenue is derived from sales within the United States.

Marketing at the retail level is typically handled by AFM’s customers. AFM does not advertise specific products on its own, but provides product information and pictures for retailers to include in newspaper and various insert advertisements. AFM’s products are typically included in retailers’ recurring promotional programs as the products drive floor traffic and sales volume due to low price points.

American Furniture had approximately $5.4$11.2 million and $8.4$5.4 million in firm backlog orders at December 31, 20122013 and 2011,2012, respectively.

Competition

AFM competes with selected large national manufacturers that produce and sell promotional products. However, promotional upholstered furniture often represents only a small percentage of revenue for these participants. Also, large diversified manufacturers tend not to place specific emphasis on developing quick-ship capabilities specifically for their promotional offerings. Therefore, AFM competes primarily with several smaller manufacturers that are typically thinly-capitalized, family owned businesses that we believe do not have the capacity, manufacturing capabilities, sourcing expertise or access to capital in order to build critical production volumes. Competition within the segment is largely based on value and delivery lead times, as opposed to product differentiation, providing AFM and its quick-ship capabilities with a key competitive advantage within the industry. AFM’s primary competitors include United Furniture Industries, Albany Industries and Hughes Furniture, Ashley Furniture and Affordable Furniture.

Suppliers

AFM’s top supplier, Independent Furniture Supply (“Independent”), was 50% owned by Mr. Thomas, AFM’s former CEO. Mr. Thomas divested his interests in Independent in November 2012. AFM does not have long-term supply contracts with Independent or any other supplier. A majority of AFM’s domestic suppliers are located near AFM due to a concentration of furniture manufacturers in northeastern Mississippi. Several of AFM’s key raw materials, including lumber, plywoodwood and polyfoam, are sourced locally with alternative suppliers available at competitive prices, if necessary. In order to continually manage material costs, AFM actively sources products from Asia. AFM imports legs, show wood, accent tables and the majority of its fabric from China-based suppliers. The prices charged by manufacturers of products such as petro-chemicals and wire rod, which are the primary materials purchased by our suppliers of foam and drawn wire effect the ongoing cost of our raw materials. Raw material cost as a percentage of sales was approximately 67%, in 2013 and 2012 and 69% and 62% in 2012, 2011, and 2010, respectively.

Regulatory Environment

AFM’s manufacturing operations, facilities and operations are subject to evolving federal, state and local environmental and occupational health and safety laws and regulations. Such laws and regulations govern air

emissions, wastewater discharge and the storage and handling of chemicals and hazardous substances. AFM believes that it is in compliance, in all material respects, with applicable environmental and occupational health and safety laws and regulations. New requirements, more stringent application of existing requirements, or discovery of previously unknown environmental conditions could result in material environmental expenditures in the future.

Employees

As of December 31, 2012,2013, American Furniture employed 484565 persons. Of these employees, 425491 were in production, shipping and purchasing with the remainder serving in executive, administrative office and other capacities. None of AFM’s employees are subject to collective bargaining agreements. We believe that AFM’s relationship with its employees is good.

Arnold

Overview

Founded in 1895 and now headquartered in Rochester, New York, Arnold Magnetic Technologies Corporation is a manufacturer of engineered, application specific magnet solutions. Arnold manufactures a wide range of permanent magnets and precision magnetic assemblies with facilities in the United States, the United Kingdom, Switzerland and China. Arnold has hundreds of customers in its primary markets including aerospace and defense, consumer, industrial, medical, automotive as well as oil and gas exploration. Arnold is the largest and, we believe, most technically advanced U.S. manufacturer of engineered magnets. Arnold is one of two domestic producers to design, engineer and manufacture rare earth magnetic solutions. Arnold serves customers and generates revenues via three business units:

Arnold operates a 70,000 sq. ft. manufacturing assembly and distribution facility in Rochester, New York with nine additional facilities worldwide in countries including the UK, Switzerland and China. The CompanyArnold employs a total of approximately 750730 people.

For the fiscal year ended December 31, 2013 and 2012, (from date of acquisition), Arnold had net sales of approximately $126.6 million and $104.2 million, respectively, with operating income of $8.9 million in 2013 and an operating loss of $0.5 million.million in 2012. Arnold had total assets of $156.4 million and $155.9 million at December 31, 2012.2013 and 2012, respectively. Net sales from Arnold (fromrepresented 12.8% of our consolidated net sales for the year ended December 31, 2013 and 11.8% of our consolidated net sales from acquisition date to December 31, 2012) represented 11.8% of our consolidated net sales.2012.

History of Arnold

Arnold was founded in 1895 as the Arnold Electric Power Station Company. Arnold began producing AlNiCo permanent magnets in its Marengo, Illinois facility in the mid-1930s. In 1946, Allegheny Ludlum Steel Corporation (Allegheny) purchased Arnold, and over the next few years began production of several additional magnetic product lines under license agreement with the Western Electric Company. In 1970, Arnold acquired Ogallala Electronics, which manufactured high power coils and electromagnets.

SPS Technologies (SPS), at the time a publicly traded company, purchased Arnold Engineering Company from Allegheny in 1986. Under SPS, Arnold made a series of acquisitions and partnerships to expand its portfolio and geographic reach. At the end of 2003, Precision Castparts, also a publicly traded company acquired SPS. In January 2005, Audax, a Boston-based private equity firm acquired Arnold from Precision Castparts.

In February 2007, Arnold Magnetic Technologies completed the acquisition of Precision Magnetics with operations in Sheffield, England; Lupfig, Switzerland; and Wayne, New Jersey. The Wayne, New Jersey facility was relocated

to Rochester, NY later that year. In addition, Arnold’s Lupfig, Switzerland operation is a joint venture partner with a Chinese rare earth producer. The joint venture manufactures RECOMA^® Samarium Cobalt blocks for the Asian market.

We purchased a majority interest in Arnold on March 5, 2012.

Industry

Permanent Magnets

There exists a broad range of permanent magnets which include Rare Earth Magnets and magnets made from specialty magnetic alloys. Magnets produced from these materials may be sliced, ground, coated and magnetized to customer requirements. Those industry players with the broadest portfolio of these magnets, such as Arnold, maintain a significant competitive advantage over competitors as they are able to offer one-stop shop capabilities to customers.

Rare Earth Magnets

Other Permanent Magnet Types

Magnetic Assemblies –Assemblies-Arnold offers complex, customized value added magnetic assemblies. These assemblies are used in devices such as motors, generators, beam focusing arrays, sensors, and solenoid actuators. Magnetic assembly production capabilities include magnet fabrication, machining, encapsulation or sleeving, balancing, and field mapping.

Precision Strip and Foil

Precision rolled thin metal foil products are manufactured from a wide range of materials for use in applications such as transformers, motor laminations, honeycomb structures, shielding, and composite structures. These products are commonly found in security tags, medical implants, aerospace structures, batteries and speaker domes. Arnold has the expertise and capability to roll, anneal, slit and coat a wide range of materials to extremely thin gauges (2.5 microns) and exacting tolerances.

Flexible Magnets

Flexible magnet products span the range of applications from advertising (refrigerator magnets) to medical applications (surgical drapes) to sealing and holding applications (door gaskets).

Products and Services

PMAG

Arnold’s Precision Magnets and Assemblies (PMAG) segment is a leading global manufacturer of precision magnetic assemblies and high-performance magnets. The segment’s products include tight tolerance assemblies consisting of many dozens of components and employing RECOMA^® SmCo, Neo, and AlNiCo magnets. These products are sold to a wide range of industries including aerospace and defense, alternative energy (hybrids/wind), automotive, medical, oil and gas, and general industrial.

PMAG is Arnold’s largest business unit representing approximately70%approximately 75% of Arnold sales on an annualized basis (including Reprographics) with a global footprint including manufacturing facilities in the U.S., U.K., Switzerland, and China.

PMAG –

PMAG—Products and Applications:

Arnold’s reprographics unit, which is part of the PMAG segment, produces systems and components for copier systems. The business unit’s state-of-the-art, high-volume precision magnetic assembly facility produces over 150,000 assemblies per year. The reprographics unit utilizes components produced by the Flexmag segment.

Reprographics – Reprographics—products and applications:

Rolled productsPrecision Thin Metals

Arnold’s rolled productsprecision thin metals segment manufactures precision thin strip and foil products from an array of materials and represents approximately 10%5% of Arnold sales on an annualized basis. The rolled productsprecision thin metals segment serveserves the aerospace & defense, power transmission, alternative energy (hybrids, wind, battery, solar), medical, security, and general industrial end-markets. With top-of-the-line equipment ( Sendzimir mills ) and superior engineering, rolled productsprecision thin metals has developed unique processing capabilities that allow it to produce foils and strip with precision and quality that are unmatched in the industry (down to 1/10th thickness of a human hair). In addition, the segment’s facility is capable of increasing production from current levels with its existing equipment and is, we believe, well-positioned to realize future growth with little incremental investment required.

Rolled products – Precision Thin Metals—Products and Applications:

Flexmag

Arnold is one of two North American manufacturers of flexible rubber magnets for specialty advertising, medical, and reprographic applications. Flexmag represents approximately 20% of Arnold sales on an annualized basis. It primarily sells its products to specialty advertisers and original equipment manufacturers. With highly automated manufacturing processes, Flexmag can accommodate customer’s required short lead times. Flexmag benefits from a loyal customer base and significant barriers to entry in the industry. Flexmag’s success is driven by superior customer service, and proprietary formulations offering enhanced product performance.

Flexmag – Flexmag—products and applications:

Competitive Strengths

Competitive Landscape

The specialty magnets industry is highly fragmented, creating a competitive landscape with a variety of magnetic component manufacturers. However, few have the breadth of capabilities that Arnold possesses. Manufacturers compete on the basis of technical innovation, co-development capabilities, time-to-market, quality, geographic reach and total cost of ownership. Industry competitors relevant to Arnold’s served markets range from large multinational manufacturers to small, regional participants. Given these dynamics, we believe the industry will likely favor players that are able to achieve vertical integration and a diversification of offerings across a breadth of products along with magnet engineering and design expertise.

Barriers to Entry

Competition

Management believes the following companies represent Arnold’s top competitors:

Business Strategies

Engineering and Product Development

Arnold’s engineers work closely with the customer to co-develop a product or process to provide system solutions, representing a significant competitive advantage. The Company’sArnold’s engineering expertise is leveraged by the state-of-the-art Technology Center working together with the various business units located in North America, Europe and Asia Pacific. This cooperative engineering effort allows Arnold to support customers and projects on a global basis. Arnold’s engineers work with customers on a global basis to optimize designs, guide material choices, and create magnetic models resulting in Arnold’s products being specified into customer designs.

Arnold has a talented and experienced engineering staff of design and application experts, quality personnel and technicians. Included in this team are engineers with backgrounds in materials science, physics, and metallurgical engineering. Other members of the team bring backgrounds in ceramics, mechanical engineering, chemical engineering and electrical engineering.

Arnold continues to be an industry leader with regard to new product formulations and innovations. As evidence of this, the CompanyArnold currently relies on a deep portfolio of “trade secrets” and internal intellectual property. Arnold continuously endeavors to introduce magnet solutions that exceed the performance of current offerings and meet customer design specifications.

Growth in Arnold’s business is primarily focused in three areas:

(i) Growing market share in existing end-markets and geographies

(ii) Developing new products and technologies

(iii) Completing opportunistic acquisitions

Existing End-Markets and Geographies

Oil & Gas

Arnold currently provides magnets and precision assemblies for use in oil and gas exploration and production, applications which typically require exceptional collaboration and co-development with its customers. The CompanyArnold supplies products used in applications such as a new oil well shutoff valve, a new down-hole logging while drilling tool, and a down-hole magnetic transfer coupling. Other applications for which the CompanyArnold is actively involved include pipeline inspection, wireless tomography tools, and chip collection.

Power Transmission

The Company’s Rolled ProductsArnold’s Precision Thin Metals segment supplies grain-oriented silicon steel produced with proprietary methods for use in transformers and inductors. These cores allow for the production of very efficient transformers and inductors while minimizing size. In addition, the Company’sArnold’s magnet solutions can be found in advanced automatic circuit re-closer solutions that substantially reduce the stress on system components on the grid. Arnold’s solutions are also present in new power storage systems. The permanent magnet bearings used in new designs improve the efficiency of the flywheel energy storage system.

Automotive

In the automotive sector, the CompanyArnold is selling magnets and magnetic assemblies primarily to Tier 1 and 2 companies. It is estimate that the current automobile contains over 50 magnetic systems, and this number is expected to grow due to vehicle electrification initiatives in order to meet increasing fuel efficiency standards. Typical applications include magnets for Hall Effect sensors that are used in braking, passenger restraint, and steering and engine control systems. Emerging magnetic applications include electric traction drives, regenerative braking systems, starter generators, and electric turbo charging. The auto industry continues to adopt increasingly sophisticated technology to reduce vehicle weight and improve fuel efficiency. As much of this technology utilizes magnetic systems, the CompanyArnold expects to benefit from this trend.

Aerospace and Defense

In the aerospace and defense sector, the CompanyArnold is selling magnets, magnetic assemblies and ultra-thin foil solutions. Specifically, in the aerospace industry, Arnold’s assemblies have been designed into products, which enables the CompanyArnold to benefit from the market growth and a healthy flow of business based on current airframe orders. Through its OEM customers, essentially all new commercial aircraft placed in service contain assemblies produced by Arnold. Arnold’s sales to large aerospace and defense manufactures includes magnetic assemblies used in applications such as motors and generators, actuators, trigger mechanisms, and guidance systems, as well as magnets for these and other uses. In addition it sells its ultra-thin foil for use in military countermeasures, honeycomb structures, brazing alloys, and motor laminations.

General Industrial

Within the industrial sector Arnold provides magnet assemblies as well as magnets for custom made motor systems. These include stepper motors, pick and place robotic systems, and new designs that are increasingly being required by regulation to meet energy efficiency standards. An example is a motor utilizing Arnold’s bonded magnets for use in commercial refrigeration systems. Arnold also produces magnetic couplings for seal-less pumps used in chemical and oil & gas applications that allow chemical companies to meet environmental requirements.

Medical

Within the medical sector, Arnold provides magnetic assemblies, magnets, flexible magnets, and ultrathin foils. Its magnet assemblies and magnets are critical parts of motor systems for dental instruments as well as saws and grinders. Magnet assemblies are also provided for skin expansion systems, shunt valves, and position sensors. In addition, its Rolled ProductsPrecision Thin Metals business unit is providing a specialty alloy for advanced breast cancer treatment.

New Products & Technologies

Flexcoat – EZ™ (Flexmag)

Flexcoat – Flexcoat—EZ™ is a patent pending technology launched in April 2010. The product was engineered to eliminate the issues associated with the conventional flexible magnetic product laminated with a printable surface. The solution is a printable coating that is applied to the magnet, which replaces substrates such as vinyl and paper that are currently adhered to the base magnet material. This results in a printed magnet that is now completely recyclable and is easier to process.

Research and Development

Arnold has a core research and development team, which has collectively over 30 years of combined industry experience. In addition to the core engineering group, a large number of other Arnold staff members assigned to the business units contribute to the research and development effort at various stages. Product development also includes collaborating with customers and field testing. This feedback helps ensure products will meet the company’sArnold’s demanding standards of excellence as well as the constantly changing needs of end users. Arnold’s research and development activities are supported by state-of-the-art engineering software design tools, integrated manufacturing facilities and a performance testing center equipped to ensure product safety, durability and superior performance. Arnold spent approximately $0.9 million and $0.2 million in research and development activities in each of the years ended December 31, 2013 and 2012.

Customers

Arnold’s focus on customer service and product quality has resulted in a broad base of customers in a variety of end markets. Products are used in applications such as general industrial, reprographic systems, aerospace & defense, advertising and promotion, consumer and appliance, energy, automotive and medical.

The following table sets forth management’s estimate of Arnold’s approximate customer breakdown by industry sector for the fiscal year ended December 31, 2013, 2012 and 2011:

Arnold has a large and diverse, blue-chip customer base. With the exception of Xerox, no otherNo customer representsrepresented greater that 10% of the company’sArnold’s annual revenue.revenue in 2013. Sales to Arnold’s top ten customers were 31%33%, 35%31% and 38%35% of total sales for the date of acquisition through December 31, 2012 and the years ended December 31, 2013, 2012 and 2011, and 2010, respectively.

Competition

Management believes the following companies represent Arnold’s top competitors:

Sales and Marketing

PMAG - – Arnold’s PMAG segment supports a global team of direct sales and marketing professionals and critical design and application engineers. The PMAG sales force is organized for regional coverage with a focus on sales in U.S., Europe, and South East Asia. Arnold serves over 500850 active customers globally. As the majority of revenues are project based in the PMAG business unit, technical sales are critical to the segment’s success. Arnold’s highly-qualified

application engineers are often integrated into its customers’ product design, planning, and implementation phases, offering the most cost effective solution for demanding clients. The resulting intimate customer relationships yield a high close rate, with revenue achieved primarily after the prototype phase.

Rolled ProductsPrecision Thin Metals – Similar to the Company’sArnold’s PMAG segment, the vast majority of Rolled Products’Precision Thin Metals’ sales are technically driven engineered solutions. These teams communicate closely in order to take advantage of potential cross-selling opportunities. Approximately 75%70% of sales are domestic, with the balance of sales to Western Europe.

Flexmag Products–- The Flexmag business segment services over 300650 customers globally. Its sales force is comprised of seven total sales professionals and supported by seven design and application engineers. This segment is primarily book/bill and has limited revenue subject to long-term purchase commitments.

The following table sets forth Arnold’s net sales by geographic location for the fiscal years ended December 31, 2013, 2012 and 2011:

Arnold had firm backlog orders totaling approximately $35 million at December 31, 2013 and 2012.

Suppliers

Raw materials utilized by the CompanyArnold include nickel and cobalt, stainless steel shafts, Inconel sleeves, adhesives, laminates, aluminum extrusions and binders. Although the CompanyArnold considers its relationships with vendors to be strong, Arnold’s management team also maintains a variety of alternative sources of comparable quality, quantity and price. The management team therefore believes that it is not dependent upon any single vendor to meet its sourcing needs. Arnold is generally able to pass through material costs to its customers and believes that in the event of significant price increases by vendors that it could pass the increases to its customers.

Intellectual Property

The CompanyArnold currently relies on a deep portfolio of “trade secrets” and internal intellectual property.

Patents

Arnold currently has thirteen patents and oneseven in process; over half of the patents were granted in the U.S. with the remaining patents granted in European countries such as Germany, Great Britain, France and the Netherlands. Ten of the patents are related to methods of making magnetic strips. In 2004, the companyArnold was granted a patent related to a thermally-stable, high-temperature, SmCo molding compound. The most recent pending patents are related to the methods of production involving flexible magnets having a printable surface as well as shaped field magnets

Trademarks

Arnold currently has 86 trademarks, 12 of which are in the U.S. The most notable trademarked items are the following: “RECOMA”, “PLASTIFORM”, “FLEXMAG” & “ARNOLD”. Application dates for various trademarks date back to as early as 1961.

Regulatory Environment

Arnold’s domestic manufacturing and assembly operations and its facilities are subject to evolving Federal, state and local environmental and occupational health and safety laws and regulations. These include laws and regulations governing air emissions, wastewater discharge and the storage and handling of chemicals and hazardous substances. Arnold’s foreign manufacturing and assembly operations are also subject to local environmental and occupational health and safety laws and regulations. Management believes that Arnold is in compliance, in all material respects, with applicable environmental and occupational health and safety laws and regulations. New requirements, more stringent application of existing requirements, or discovery of previously unknown environmental conditions could result in material environmental expenditures in the future.

Arnold is a major producer of both Samarium Cobalt permanent magnets under its brand name RECOMA^® and Alnico (in both cast and sintered forms). Both materials from Arnold meet the current Berry Amendment or Defense Acquisition Regulations Systems (DFARS) requirements per clauses 252.225.7014 252.225.7014 further described under 10 U.S.C. 2533b. This provision covers the protection of strategic materials critical to national security. These magnet types are considered “specialty metals” under these regulations.

Employees

Arnold is led by a capable management team of industry veterans that possess a balanced combination of industry experience and operational expertise. The current senior management team has approximately 100 years of cumulative experience with an average tenure of approximately 16 years at Arnold. Current management has implemented numerous operational, strategic, and financial initiatives over the past several years, including almost 100 unique lean initiatives and kaizen events.

Arnold employs approximately 750730 hourly and salaried employees located throughout North America, Europe and Asia. Arnold’s employees are compensated at levels commensurate with industry standards, based on their respective position and job grade.

The Company’sArnold’s workforce is non-union except for approximately 7066 hourly employees at its Marengo, Illinois facilities, which are represented by the International Association of Machinists (IAM). Arnold enjoys good labor relations with its employees and union and has a three year contract in place with the IAM, which will expire in June of 2013.2016.

CamelBak

Overview

CamelBak, headquartered in Petaluma, California, is a diversified hydration and personal protection platform, offering Products for outdoor, recreation and military applications. CamelBak offers a broad range of recreational / military hydration packs, reusable water bottles, specialized military gloves and performance accessories. As the leading supplier of hydration products to specialty outdoor, cycling and military retailers, CamelBak maintains the #1 market share position in domestic recreational markets (80%-85%), per management estimates, for hands-free hydration packs and the #1 market share position for reusable water bottles in specialty channels (30%) per management estimates. CamelBak is also the hydration pack of choice for the warfighter, with an estimated 85% market share in post-issue hydration packs. Over its more than 20-year history, CamelBak has developed a reputation as the preferred supplier for the hydration needs of the most demanding athletes and warfighters. Across its markets, CamelBak is respected for its innovation, leadership and authenticity.

For the fiscal years ended December 31, 2012 and 2011, CamelBak contributed net sales of approximately $157.6 million and $42.7 million, respectively, and operating income of $25.5 million in 2012 and an operating loss of $6.8 million in 2011. CamelBak had total assets of $259.1 million and $262.0 million at December 31, 2012 and 2011, respectively. Net sales from CamelBak represented 17.8% of our consolidated net sales in the year ended December 31, 2012 and 7.0% of our consolidated net sales in 2011 (from acquisition date).

History of CamelBak

Founded in 1989 and headquartered in Petaluma, California, the company initially gained a following among mountain bikers in the early 1990’s through its first product, the ThermoBak™. As the company grew among this base of users, its products continued to gain acceptance within other arenas where participants needed easy access to water to achieve optimal performance in their activity.

The hands-free feature of CamelBak’s products proved to be appealing to outdoor sports enthusiasts and critical to others, including the U.S. Military. After successfully developing the hands-free hydration category, the company in 2006, recruited new management, including industry veteran and Board member Sally McCoy in the role of CEO, and acquired Southwest Motorsports (since rebranded CamelBak Gloves). With a strong market presence in hydration packs, the management team focused on continued expansion into adjacent markets and developing and executing on a consistent strategy of innovation. Since this time, CamelBak has steadily grown sales and earnings and has enhanced its relationships with suppliers to strengthen its supply chain, reengineered its product distribution capabilities and tightly controlled operating expenses to match the needs of the business.

In 2006, CamelBak expanded its recreational business into the fast growing bottle category. The company’s initial launch of the innovative Better Bottle™ was followed by numerous successful bottle product introductions for everyday users, road cyclists, kids and recreational enthusiasts, including eddy™ and the podium collection . CamelBak was first to market with an entirely BPA-free plastic bottle product line.

We purchased a majority interest in CamelBak on August 24, 2011.

Industry

Recreation Market – With over 100 million participants, the outdoor recreational activity market represents a large, attractive and stable group of consumers. CamelBak’s legacy products have historically been focused on a subset of this group, consisting of cyclists, mountain bikers and other passionate outdoor enthusiasts who tend to be loyal and consistent buyers of premium and performance-enhancing offerings. CamelBak’s core customers are typically outdoor enthusiasts who exhibit very high participation rates and frequent purchasing behavior. In addition to CamelBak’s legacy consumer group, the company has increasingly used its brand authenticity, credibility and broadening product portfolio to reach athletes in adjacent sporting activities.

Long-term growth in the hydration and personal protection industry is driven by a number of factors. Consumer recognition of personal hydration’s importance to health and well-being has been a growing and enduring trend, reflected by the proliferation of bottled water and functional beverages. The importance of water as a healthy choice has become even more prominent as a key component to healthy living. Further, people are increasingly aware of the effects of even minimal dehydration on multiple functions of the body, including brain function, digestion, metabolism and skin health. CamelBak’s products have proven their ability to provide greater hydration. An independent study conducted by Pepperdine University found that people utilizing CamelBak’s Bite Valve™ technology consume 24% more than those using single serving disposable bottled water or less innovative products. In addition, recently there has been a reduction in disposable bottled water consumption in the U.S., primarily as a result of price and the wide-spread awareness of the negative environmental impact of disposable water bottles. According to the Beverage Marketing Corporation, the economy was the primary cause of the decrease in U.S. disposable bottled water sales in 2008 and 2009. With respect to the environment, the disposable water bottle’s environmentally harmful lifecycle is generating significant backlash. The reliance on oil in the production and transportation of the bottles and the fact that over two-thirds of bottles are not recycled is driving consumers to seek alternatives to disposable bottles. Further, there are a number of government mandates forcing the elimination of disposable bottles. Nationwide, local governments are enacting these curbs to combat the cost and waste of disposable bottles. In recent years, governments of all levels have received scrutiny for fiscal irresponsibility and a number of municipalities have launched initiatives focused on curbing disposable water bottles in their communities. In 2006, a San Francisco investigation revealed that the city spent over $500,000 per year on bottled water. This revelation triggered a nationwide analysis of government spending on bottled water with public funds.

U.S. Government & Military Market – The military acquisition process has responded to the demands of modern warfare which require forces to be more agile and flexible than ever before. This trend has been highlighted by the increased use of multiple funding and procurement mechanisms such as Rapid Fielding Initiatives (“RFI”) and Joint Urgent Operational Needs Statement (“JUONS”). These programs provide funding for mission critical operational needs such as IED detection and defeat and lifesaving warfighter equipment purchases without the normal bid and proposal process that can take months and even years to get equipment in the hands of the end user.

In addition to responsive procurement contracts such as the RFI, the military has continued a gradual decentralization of purchasing which allows decision makers closer to the front line to select what specific items need to be acquired for a unit. Unit and individual equipment purchases are made primarily through U.S. Government Services Administration (“GSA”) contracts or at military exchange and supply locations. Warfighters and their families frequently purchase supplemental gear that is superior to standard issue products. CamelBak is well positioned to benefit from continued decentralized purchasing.

The U.S. defense budget has increased dramatically in the last decade in response to terrorism attacks at home and increased state and non-state threats abroad. Since 1998, Department of Defense (“DoD”) spending has increased over 90% primarily as a result of the two major wars in Iraq and Afghanistan. The 2012 DoD budget requested $531 billion in base spending with an additional $115 billion in overseas contingency operations (“OCO’) spending. By way of comparison, 2011’s budget was $687 billion, with a $528 billion base budget and the remaining $159 billion used for OCO. The reduced request for OCO is the direct result of reductions in troop deployment in Iraq and Afghanistan.

Recently, the DoD released its 2013 budget request which calls for a decrease in base budget spending to $525.4 billion, with an additional $88.5 billion dedicated to OCO. The budget estimates released, forecast a negative 0.3% real growth rate for the base budget from 2013 – 2017.

Products and Services

CamelBak focuses on offering high quality, industry leading hydration and performance equipment. The company’s products fall into four key categories:

Hydration Packs – CamelBak’s heritage and legacy is in hydration packs and the company maintains the broadest and deepest line of packs in the industry. CamelBak’s core hydration product consists primarily of an easily cleaned and filled polyurethane reservoir, a connecting tube and a self-sealing mouthpiece, or “bite-valve,” which facilitates simple and intuitive drinking. The CamelBak hydration system allows users to conveniently carry one to three liters of water, which can be easily accessed without interruption of the user’s task or activity. The system is most often sold as an integrated backpack or waist-pack, which is uniquely designed for a specific use, such as biking, running or military applications. Hydration packs represented 50% and 44% of CamelBak’s gross sales in the twelve months ended December 31, 2012 and 2011, respectively.

Recreation Packs

Having created the hands-free hydration category, CamelBak continues to be the dominant market leader in the recreational sector since its inception. After starting with a mountain biking product, CamelBak developed a host of other types of biking hydration packs that are designed to match specific types of biking. The company sells classic cycling packs that are lightweight and streamlined. CamelBak also sells larger more durable packs designed for long off-road rides and a Downhill/Freeride line designed for specific types of mountain biking activities. By starting with a focused line and expanding it to cover many different types of biking activities, CamelBak has created the deepest, broadest line of hydration packs in the industry.

As CamelBak extended its packs to cover different biking niches, top athletes from other outdoor sports began to clamor for product. To meet this demand, the company has created lines that cater to the diverse set of outdoor athletes:

These customized solutions have all been developed with an eye towards enhancing the performance of each activity’s respective athletes. That customization is part of the innovative difference that allows CamelBak to differentiate itself in a competitive market.

Military Packs

CamelBak sells a wide selection of category leading military packs. Management estimates the company has in excess of 85% market share in post-issue military hydration packs. It is also one of only a few brands sold to U.S. Military personnel that is allowed to prominently display the brand name on the outside of the product. The packs include features such as easy armor integration and extreme durability appropriate for use in the harshest conditions.

Bottles – In 2006, CamelBak parlayed its credibility in hands-free hydration and expanded into bottles. The company introduced the Better Bottle™, subsequently replaced by eddy™, incorporated a number of features that quickly established it as a best-in-class hydration solution. These features include: (i) the patented spill-proof Bite Valve, (ii) the first insulated stainless steel water bottle and (iii) in 2008, the first all BPA-free line of plastic water bottles.

The success of the Better Bottle™ led the company to design a complete line of bottles that would mirror the pack line’s legacy of customization. CamelBak developed a line for children, which included bite valves that have to be removed from the inside of the bottle to prevent choking. The company also released the Podium^® insulated and non-insulated line, which includes features such as the patented Jet Valve™.

The company’s bottle offering has continued to evolve to meet the specific demands of consumers. These demands have included activity-based needs such as customized cycling bottles. They have also included health concerns, including the consumer backlash against BPA. CamelBak recognized this concern early and became the first to offer an entire line of BPA-free hard plastic bottles in May of 2008.

The company’s bottle offering Groove™, provides users the ability to filter water in any place at any time through its integrated straw assembly. Users simply fill the bottle with tap water, screw the cap on and start sipping. The integrated plant-based carbon filter reduces chlorine taste and odors found in tap water thus improving taste and eliminating the desire to purchase disposable bottles of water. Bottles represented approximately 34% and 31% of CamelBak’s gross sales for the twelve months ended December 31, 2012 and 2011, respectively.

Gloves – The evolution of CamelBak gloves parallels that of the pack business in the Government / Military channel. Initially created for pit crews in the auto racing market, members of elite squads who became aware of the product were impressed with its dexterity and durability. Following this unofficial endorsement, members of the U.S. Armed Forces began requesting CamelBak gloves. The gloves are highly-technical and difficult to produce, with some styles requiring 44 individual pieces for the assembly of the final product. Today, CamelBak gloves are exclusively a Government / Military product, as their technical characteristics exceed that which a non-military user would desire. Gloves represented approximately 6% and 14% of the company’s gross sales for the twelve months ended December 31, 2012 and 2011, respectively. The reduction in Glove sales over the past two years is consistent with the reduction of deployed troops.

Accessories – CamelBak offers various accessories to complement its hydration systems. Accessories are available for each product line and include items that are made to enhance hydration performance and others for maintenance or replacement parts.

CamelBak’s goal is to reinvent the way that individual athletes, warfighters and every day users hydrate and perform. To that aim, the company has developed a number of products that help to further enhance the already innovative way that its products deliver water:

CamelBak products are known for their high quality and durability. The company provides products to help maintain this durability and offers replacement parts in the rare instance that the products cease to perform at the optimal levels:

In addition to recreational accessories, the company offers a specialized line associated with its military products. These accessories help enhance the performance of military products by adding resistance to chemical and biological agents or allowing connection to standard issue gas masks. For example, the HydroLink allows warfighters to replace their bite valve with a connector, allowing them to hydrate while wearing their gas mask. Accessories accounted for approximately 10% and 11% of CamelBak’s gross sales for the twelve months ended December 31, 2012 and 2011, respectively.

Competitive Strengths

Leading Brand Recognition & Market Share – CamelBak believes it has a #1 market share in the following areas: (i) recreational hands- free hydration packs, (ii) reusable water bottles for specialty channels and (iii) post-issue hydration packs for the U.S. military. The company enjoys outstanding awareness and a reputation for superior performance with consumers, retailers and warfighters. For example, within the Armed Forces, CamelBak is one of only a few companies allowed to prominently display its brand name on active military products.

Preferred Partner – CamelBak is a preferred partner to leading retailers and the military. The company is a supplier to leading national specialty and sporting goods retailers, including REI, EMS, Dick’s Sporting Goods and The Sports Authority. In addition, CamelBak does business in over 400 military retail exchanges.

Business Strategies

Introducing Technically Superior Products in Core Categories – The company’s core categories include hydration packs, bottles and warfighter protection products, and CamelBak’s mission is to continuously reinvent the way people hydrate and perform. To meet this goal, the company will continue to create innovative, technical solutions that exceed the demands of its customers. The company’s product pipeline for its core customers remains robust.

Expanding Product Suite in Everyday Hydration to Reach New Customers and Channels– The CamelBak brand is synonymous with personal hydration, and this credibility grants the company permission to enter broader aspects of hydration. The company is committed to continuing to broaden its portfolio of personal hydration solutions to reach new customers, and, under the leadership of Ms. McCoy, has proven that it can extend its brand beyond hard-core athletes. For example, the company has successfully reached new consumers and channels through its water bottle product line, which offers the features desired by its core customer base of performance athletes to the everyday customer shopping at Target. As the company continues to expand its relevance to everyday users, its authenticity will allow the company to enter other areas such as purification and other products.

Broadening International Opportunities – Management believes there is significant potential to expand its international sales in the consumer market. Currently, CamelBak’s recreational business is sold through a network of approximately 65 foreign distributors. With improved distribution in the recreational market, the company would have a number of opportunities to expand throughout Europe, Asia and South America.

Penetrating Select Areas of Specialty Retail – CamelBak aspires to build a product portfolio that shapes the way consumers and warfighters perform across all activities. To that aim, CamelBak has made significant strides introducing new products that target activities outside of its core biking and hiking audience. Past examples include multi-sport enthusiasts and runners. The company targeted the multi-sport category with highly- functional wearable hydration, which consists of a wearable shirt with built in hydration pack that allows enthusiasts to hydrate hands-free without a traditional pack.

CamelBak keeps an open dialogue with the athletes it endorses and is thus able to gain real-time feedback on the products it produces. By learning the needs of these consumers and others, CamelBak is able to identify other areas to develop ground-breaking solutions. As CamelBak continues to innovate and create new products to serve

the needs of more diverse consumers, it will further grow sales to these retailers. As a sports subculture brand, CamelBak is able to migrate to different activities without losing the authenticity and credibility it has developed as a leading product innovator. As examples, skiers and kayakers alike have adopted the brand as their own without even realizing that other sports enthusiasts have done the same.

CamelBak launched its own direct to consumer E-Commerce site during the fourth quarter of 2012.The site initially offered bottles and accessories along with water packs. In 2013 the site is expected to expand and will offer more hydration packs which will coincide with CamelBak’s annual pack launch.

Research and Development

CamelBak’s hydration products are among the most technically advanced and rigorously engineered in their markets. They are specifically designed to function and perform under diverse and extreme conditions. CamelBak’s research and development effort is at the core of its strategy of product innovation and market leadership. CamelBak’s products feature a combination of innovative design, high-quality materials, and superb functionality and performance elements and are recognized as being the leaders or among the leaders in all of the market segments in which they participate.

CamelBak has a robust core research and development team, which has collectively over 36 years of combined industry experience. In addition to the core engineering group, a large number of other CamelBak staff members, who also use the company’s products, contribute to the research and development effort at various stages. Product development also includes collaborating with customers and field testing. This feedback helps ensure products will meet the company’s demanding standards of excellence as well as the constantly changing needs of end users.

CamelBak’s research and development activities are supported by state-of-the-art engineering software design tools, integrated manufacturing facilities and a performance testing center equipped to ensure product safety, durability and superior performance. The testing center collects data and tests products prior to and after commercial introduction. Research and development costs (from the date of acquisition) totaled $3.0 million and $0.8 million during the years 2012 and 2011, respectively.

Customers and Distribution channels

CamelBak offers a unique value proposition for its customers. As an innovative subculture sports brand, CamelBak has the authenticity and credibility to defend market share, command premium prices and leverage into new categories. The brand strength allows retailers to hold prices and thus protect margins. Further, the company’s “Got Your Bak” lifetime warranty speaks to the level of quality and customer service offered. The company’s products, which are sold domestically and internationally, are segmented into two major end markets: Recreational and Government/Military. CamelBak’s powerful product distribution network is comprised of long-standing, entrenched relationships with a diversified set of customers. CamelBak’s top ten customers comprised approximately 49% and 52% of gross sales in the year ended December 31, 2012 and 2011, respectively, with no single customer accounting for greater than 9% of gross sales.

Recreational Distribution – CamelBak markets its hydration and performance products to several channels in the recreational market. Management estimates that the company currently holds in excess of 85% of the market share of the hands-free hydration market. A share this large demonstrates the strength of the brand and the credibility that the products have with consumers. CamelBak invented the category in 1989 and although competitors have introduced a number of similar products, the company has held on to its base.

Recreational–Domestic Distribution: The Recreational–Domestic Division is focused on product distribution through a variety of retail accounts in the United States. Particular emphasis is placed on premium active lifestyle retailers across a broad spectrum of channels, including camping/outdoor, bike, natural foods, housewares, hunting/fishing, paddle sports and surf/skate.

The division manages approximately 2,600 retail customers with over 9,500 retail storefronts. Current distribution channels range from specialty bicycle, outdoor, paddle sports, hunting stores and catalogs to large outdoor and sporting goods chains that reach the broader market. Importantly, the company has selectively expanded and diversified its distribution channels over time. Today, notable customers include REI, Dick’s Sporting Goods, EMSTarget, Whole Foods Market, Academy and The Sports Authority.

The company’s entrance into the reusable bottle category in 2006 resulted in a notable broadening of distribution, as the company made the decision to strategically expand into new channels. The company felt it was important to reach an even broader consumer base to further its vision of “obsoleting” bottled water as the most common way to hydrate. The bottle business has also enabled CamelBak to achieve penetration in the college and corporate sponsorship markets.

Recreational–International Distribution: The Recreational–International division is focused on product distribution through outdoor, sporting goods and specialty retailers that are managed through local distributors focused on premier retail accounts. The company maintains an office in Europe to provide oversight of distributor performance, market intelligence and limited supplemental marketing support, including event staffing, trade show management, athlete sponsorships, public relations and market/product intelligence gathering. Order scheduling, fulfillment and logistics support for the company’s international operations are provided from CamelBak’s Petaluma headquarters.

Key international markets include the United Kingdom, Germany, France, Australia, Japan, Canada, Norway and Korea. As is the case in the United States, the CamelBak brand is widely recognized and respected by enthusiasts and maintains a dominant market share.

Military–Retail Exchange Distribution – Military retail exchanges, including the Army and Air Force Exchange Service (“AAFES”), the Navy Exchange Service Command (“NEXCOM”) and the Marine Corps Exchange (“MXC”), are essentially large retail chains serving the military community. Military personnel, veterans and their families are strongly incentivized to shop at exchanges given that the store markup is typically less than the off base markup from other retailers, exchanges do not charge sales tax and a portion of the exchanges’ earnings often go towards funding expenditures related to the military’s morale, welfare and recreation. Furthermore, the exchanges provide an added benefit to consumers, given the convenience they provide to troops deployed in nearby locations.

The military retail exchanges represent large distribution platforms extending across many different countries. CamelBak sells through over 400 locations. CamelBak pioneered the adoption of hands-free hydration systems by U.S. and foreign militaries and is today, we believe, the preferred brand of warfighters. As a result, CamelBak has dominant market share throughout the military retail channel. CamelBak is one of AAFES largest vendors and has a strong, long-term relationship with the retailer.

Government / Military Distribution – In the Government / Military division, CamelBak sells products and accessories related to both hydration and performance. CamelBak continues to expand its Government / Military market by increasing penetration into foreign governments and militaries. A key component of U.S. foreign policy is the replacement of some deployed troops with those of foreign militaries. CamelBak’s success in the U.S. Military carries tremendous credibility abroad, which has enabled the company to achieve meaningful adoption outside the U.S.

Domestic Government / Military Distribution – CamelBak sells its products through a range of domestic Government / Military channels:

Sales and Marketing

CamelBak approaches marketing from a unique point of view that is meant to inspire customers. CamelBak is engaged in small endorsement deals that provide gear to actual users as well as athletes who bike, climb and hike professionally as opposed to entering into large multi-year contracts. Second, the company’s marketing campaign uses photographs and videos shot from a user’s perspective. This photographic style encourages the consumers viewing the ad to imagine they are engaging in the activity shown. This experience serves to promote the inspirational nature of CamelBak’s brand by “liberating people to go further.”

Marketing – CamelBak uses a “two pronged” approach to marketing:

Sales Organization – CamelBak’s in-house sales team consists of dedicated sales people and customer service employees. The sales organization is strategically aligned by product category/sales channel. The sales managers split coverage for major national accounts with one team responsible for maintaining and growing sales to established channels and the other for business to larger national retailers and natural foods stores. With an average tenure of 5 years with the company, CamelBak’s sales team maintains enduring and entrenched relationships with each of its customers.

The Recreational–Domestic division manages customers through both an in- house sales management staff and a network of sales agencies consisting of a number of independent sales representatives. The Recreational– International division manages its international customers through local distributors focused on premier retail accounts. The company maintains an office in Europe with two employees to provide oversight.

CamelBak had sales backorders totaling $29.3 million and $29.4 million At December 31, 2012 and 2011, respectively.

Competition

CamelBak pioneered the hydration category with the introduction of the hydration pack more than 20 years ago. CamelBak’s brand admiration and customer loyalty, which are driven by its innovative products, have allowed the company to continuously defend its market position in packs. These traits also allowed the company to successfully enter the bottle category where it holds a leading market position.

A summary of CamelBak’s competitors in hydration packs, bottles and reservoirs is listed below:

Across its military product set, CamelBak competes against a wide variety of industry players which include large prime and tier two defense companies, small and mid-sized companies specializing in warfighter equipage and companies focused predominantly on the consumer or materials market with a limited number of defense product offerings. CamelBak is recognized as a high-end supplier in each of its product categories (hydration and gloves). Management believes CamelBak is the leading supplier of post-issue hydration packs with over 85% of the market share and among the leading providers of specialized tactical gloves which are worn by some of the most elite users in the world.

Suppliers

CamelBak’s product manufacturing is based on a dual strategy of in-house manufacturing and strategic alliances with select sub-contractors and vendors. CamelBak operates a scalable, low-cost supply chain, sourcing materials and employing contract manufacturers from across the Asia-Pacific region, the U.S. and Puerto Rico. Once manufactured, products are shipped directly from overseas manufacturers to CamelBak’s distribution center in San Diego for receiving and stocking and thereafter distributed to retail locations or third-party distributors.

CamelBak has developed an efficient and low-cost supply chain. The company’s deep understanding of military procurement requirements has allowed it to build a flexible network of vendors to reliably meet large military orders on short notice and to shift orders to vendors to be compliant with military requirements for its products. While striving to maximize the profitability of its products, the company is also keenly aware of its corporate responsibility and, thus, holds itself and its vendors to the highest supply chain practices. As a result of the company’s dedication to superior supply chain and manufacturing practices, the U.S. Military’s GSA named CamelBak the “Green Contractor of the Year” in 2009 and “MAS Contractor of the year in 2011”.

In recent years, the company has streamlined its operating expenses, tightening cost controls and maintaining a cost structure more in line with the size of its platform. Additionally, the company has driven cost improvements by negotiating prices with vendors using an “open book” policy, in which each vendor’s profit margins, labor rates and material costs are agreed to upfront. This allows the company’s operations group to negotiate reductions in component prices from raw material manufacturers resulting in cost savings that are passed through to CamelBak.

The company’s primary raw materials are fabric, resin, polyurethane film and various resins for which the company and/or its supplier partners receive multiple shipments per week. The company purchases its materials from a combination of domestic and foreign suppliers.

Intellectual Property

Hydration priorities include easy cleaning and filling, freshness and taste, durability, temperature, water purity, leak-proof products and sustainability, all of which improve a customer’s overall hydration experience or enable the customer to perform at high levels. As a reflection of this focus, CamelBak holds 39 active patents and 16 pending patent applications.

Regulatory Environment

Management is not aware of any existing, pending or contingent liabilities that could have a material adverse effect on the company’s business. The company is proactive regarding regulatory issues and is in compliance with all relevant regulations. Management is not aware of any potential environmental issues.

Employees

As of December 31, 2012, CamelBak employed approximately 297 persons. None of CamelBak’s employees are subject to collective bargaining agreements. CamelBak’s relationship with its employees is good.

Ergobaby

Overview

Ergobaby, headquartered in Los Angeles, California, is a premier designer, marketer and distributor of baby wearing products, stroller travel systems and accessories. Ergobaby offers a broad range of wearable baby carriers, stroller travel systems and related products that are sold through more than 650 retailers and web shops in the United States and internationally in about 50 countries.

Ergobaby’s reputation for product innovation, reliability and safety has led to numerous awards and accolades from consumer surveys and publications, including babycenter, Parenting Magazine, Pregnancy magazine and Wired magazine.

For the fiscal years ended December 31, 2012, 2011 and 2010, Ergobaby had net sales (from the date of acquisition) of approximately $64.0 million, $44.3 million and $12.2 million, respectively. Ergobaby had operating income totaling $10.9 million and $7.9 million in the years ended December 31, 2012 and 2011, respectively, and an operating loss of $2.4 million from its date of acquisition through December 31, 2010. Ergobaby had total assets of $117.7 million, $118.4 million and $95.7 million at December 31, 2012, 2011 and 2010, respectively. Ergobaby’s net sales represented 7.2% and 7.3% of our consolidated net sales for the year ended December 31, 2012 and 2011 and 2.4% of our consolidated net sales for the year ended December 31, 2010 (from acquisition date).

History of Ergobaby

Ergobaby was founded in 2003 by Karin Frost, who designed baby carriers following the birth of her son. The product line has since expanded into seven primary product lines: the Original, Designer, Organic, Sport, Performance, Travel, and Options carriers with multiple style variations. In its second year of operations, Ergobaby sold 10,500 baby carriers and by 2012 sold over 890,000 in the year. In order to support the rapid growth, in 2007, Ergobaby made a strategic decision to establish an operating subsidiary (“EBEU”) in Hamburg, Germany. We purchased a majority interest in Ergobaby on September 16, 2010.

On November 18, 2011 Ergobaby acquired Orbit Baby for approximately $17.5 million. Founded in 2004 and based in Newark, California, Orbit Baby produces and markets a premium line of stroller travel systems, including car seats, strollers and bassinets that are interchangeable using a patented hub ring.

Both brands are well regarded in the infant and juvenile industry. Ergobaby was named to the “20 Best Products in the Last 20 Years” by Parenting Magazine (2007), and continues to be recognized for its quality evident by recently being named babycenters’ 2012 “Moms’ Pick” for best Baby Carrier. While The Orbit Baby Infant System has received vast honors, including, 2007 iParenting Media Award for Best Product, Baby Gizmo’s Editor’s Choice 2012, babble.com favorite Car Seats 2012, She Knows Parenting Stroller Award 2011, and lilsugar Best Stroller of 2010.

Industry

Ergobaby competes in the large and expanding infant and juvenile products industry. The industry exhibits little seasonality and is somewhat insulated from overall economic trends, as parents view spending on children as largely non-discretionary in nature. Consequently, parents spend consistently on their children, particularly on

durable items, such as car seats, strollers, baby carriers, and related items that are viewed as necessities. Further, an emotional component is often a factor in parents’ purchasing decisions, as parents desire to purchase the best and safest products for their children. As a result, parents spend from $8,480 to $23,690 on their child on an annual basis for related housing, food, transportation, clothes, healthcare, daycare and other items, depending on age of the child & annual income. On average, households spent from 12-25 percent of their before-tax income on a child, according to the USDA’s most recent report (May 2011). Similar patterns are seen in other counties around the world. According to a Mintel report published in March 2010, estimated 2010 retail dollars spent on baby durables reached approximately $10.3 billion in the U.S., up compared to approximately $9.5 billion in 2004, with a considerably larger market worldwide. The U.S. retail market is expected to continue its growth trajectory through 2014 with an anticipated market size of approximately $12.0 billion.

Demand drivers fueling the growing spending on infant and juvenile products include favorable demographic trends, such as (i) an increasing number of births worldwide; (ii) a high percentage of first time births; (iii) an increasing age of first time mothers and a large percentage of working mothers with increased disposable income; and (iv) an increasing percentage of single child households and two-family households.

Given that the child’s safety is paramount, many parents do not want to compromise a baby or child’s safety by purchasing secondhand products to save money. In many cases, when purchasing secondhand, the parent does not know key facts about the product they are buying, such as the age of the product, history of the item, or potential recalls by the manufacturer. Furthermore, the safety standards for the product may have changed since the version being resold, resulting in a product that does not meet the most rigorous safety standards. Consequently, as parents consider purchases of important necessities such as baby durables, they typically favor new products. According to Mintel Research, approximately 83% of baby carrier purchases were first-time purchases, with the remainder being either purchased second hand or borrowed.

Safety influences not only whether parents purchase new or used products, but also which brands parents choose, which consequently impacts pricing and competition within the infant and juvenile products market. In purchases of baby durables, parents often seek well-known brands that offer a sense of comfort regarding a product’s reliability and safety. As a result, brand name and safety certifications can serve as a barrier to entry for competition in the market, as well as allow well-known brands such as Ergobaby to charge a premium.

Wearable Carriers and Baby Wearing Trends –

Within the broader market for infant and juvenile products, Ergobaby operates specifically within the market for child mobility and transport products. According to the Juvenile Products Manufacturers Association (“JPMA”), reported child mobility and transport manufacturer dollar sales, which includes sales of carriers, strollers, travel systems, and related products, totaled approximately $349.1 million in the U.S. in 2009. Penetration of baby carriers currently trails that of strollers, car seats, and other infant and juvenile products. JPMA manufacturer sales growth from 2008 to 2009 suggests that the soft carrier segment is growing more rapidly than other infant and juvenile product categories, with 7.8% unit growth and dollar growth. Comparatively, stroller shipments and convertible car seat shipments decreased 1.6% and 8.3%, respectively, over the same period

Management believes that continued growth within the market for wearable baby carriers is driven by several trends, including (i) lower relative penetration of baby carriers versus other infant and juvenile products; (ii) favorable demographics; (iii) increasing focus on the popularity of baby wearing; and (iv) convenience and mobility of wearable products.

Products and Services

Ergobaby- Baby Carriers

Ergobaby has two main baby carrier product lines: baby carriers and accessories. Ergobaby’s baby carrier design supports a natural sitting position for babies, eliminating compression of the spine and hips that can be caused by unsupported suspension. The baby carrier also balances the baby’s weight to parents’ hips and shoulders, and alleviates physical stress for the parent. The organic carrier line uses 100% organic cotton from India. Additional accessories are provided to complement the baby carriers.

Within the carrier category, Ergobaby sells seven primary product lines: the Original, Designer, Organic, Sport, Performance, Travel, and Options carriers and; within each line, Ergobaby offers multiple style variations. Amongst the carrier category, Original carriers represented 48% of 2012 and 39% of 2011 carrier sales, respectively, and Organic carriers represented 22% and 37%, of 2012 and 2011 carrier sales, respectively, with all other carriers representing the remaining sales in each year. Carrier sales were approximately $44.6 million; $37.8 million and $30.0 million in the years ended December 31, 2012, 2011 and 2010, respectively, and represented approximately 70% of total sales in 2012, and 86% of total sales in 2011 and 2010.

Within the accessories category, Ergobaby sells twelve primary product lines: back packs, bibs, changing pads, chest strap, doll carrier, front pouch, hood replacement, Infant Insert, papoose coat, teething pads, waist extension and a weather cover. Within each line, Ergobaby offers multiple style variations including color and organic/non-organic fabric. The Infant Insert is the largest sales component of the accessory category, representing more than half of total accessory sales for 2010 and 2011. Accessory sales were $6.0 million, $6.5 million and $4.4 million and represented approximately 9%, 15% and 13% of total sales in 2012, 2011 and 2010, respectively.

Ergobaby’s core baby carrier product offerings with average retail prices are summarized below:

Orbit Baby Infant Systems

The Orbit Baby Infant System has three main product groups: stroller travel systems, product extensions and accessories.

The Orbit Baby Stroller Travel System is a three-piece kit that includes an infant car seat, car seat base, and stroller. Unlike traditional infant travel systems, the Orbit Stroller Travel System’s unique docking technology, or “SmartHub^TM”, allows for easy interchange of four different seats, including the Infant Car Seat, Stroller Seat, Bassinet, and Toddler Car Seat.

The Orbit Baby car seat base (which stays in the car when not in use) is touted as the easiest, quickest base to safely install. The base’s patent-pending StrongArm^TM technology allows a secure installation in 60 seconds and easily docks the car seat from almost any angle, allowing the parent to ergonomically transport the child.

The Orbit Baby Infant Car Seat is the common “plug-in” for the three-in-one system and can be moved effortlessly from the car seat base to the stroller. As a result of the SmartHub technology, Orbit is the only infant car seat that ergonomically rotates for simple docking and undocking to and from the car and stroller.

The third member of the Stroller Travel System is Orbit’s modern and easy-to-use stroller. As is the case with the car seat base, the circular SmartHub allows the infant car seat to dock on the stroller from any angle, and with 360 degree rotation, the baby can face rear, forward, or sideways to view the world from different perspectives.

Orbit Baby offers product extensions including additional seats and strollers, including the Double Helix, to accommodate growing children and families.

Orbit Baby also offers a wide range of accessories including the Sidekick Stroller Board, Stroller Panniers, Weather Pack, Color Pack, Footmuffs, Stroller Travel Bag and Baby Gear Spa Kit.

Orbit Baby’s core product offerings, extensions and accessories and suggested retail prices are below:

Competitive Strengths

Ergobaby Carriers are known for their unsurpassed comfort– Ergobaby’s superior design results in improved comfort for both parent and baby. Parents are comfortable because baby’s weight is evenly distributed between the hips and shoulders while baby sits ergonomically in a natural sitting position. The concept of baby carrying has increased in popularity in the U.S. as parents recognize the emotional and functional benefits of carrying their baby. Consumers continually cite the comfort, design, and convenient “hands free” mobility the Ergobaby carrier offers as key purchasing criteria.

Orbit Baby Innovation –With 14 patents and 10 patents pending, Orbit Baby offers a complete child travel system, from stroller to car seat and beyond. A favorite with moms and dads alike, the integrated Orbit Baby system is designed to take your child everywhere with unprecedented ease and style. With an emphasis on advanced safety and engineering, Orbit Baby is continually recognized for its innovation, ergonomic design and environmentally friendly focus. Orbit Baby applies hands-on experience and extensive research to create products that are elegantly simple, intuitive to use, and unsurpassed in real-world safety.

Business Strategy

Increase Penetration of Current U.S. Distribution Channels– Ergobaby continues to benefit from steady expansion of the market for wearable baby carriers and related accessories in the U.S. and internationally. Going forward, Ergobaby will continue to leverage and expand the awareness of its outstanding brands (both Ergobaby and Orbit Baby) in order to capture additional market share in the U.S., as parents increasingly recognize the enhanced mobility, convenience, and the ability to remain close to the child that Ergobaby carriers enable. The company currently markets its products to consumers in the U.S. through brick-and-mortar retailers, including specialty boutiques; online web shops; and directly through its website. Management has developed a targeted strategy to increase its penetration of these currently underpenetrated distribution channels that includes: (i) improved retain presence, including new packaging and in-store support materials; (ii) improving the effectiveness of marketing programs including utilization of social sites, digital marketing, and improved consumer engagement, and (iii) development of new products and designs.

Cultivate Attractive New Distribution Channels– In addition to its existing retail customer base, comprised primarily of small specialty retail stores and boutiques, there are numerous other retail channels that offer tremendous growth opportunities for Ergobaby products. Specifically, management recently began targeting several types of retailers as the company continues its growth trajectory, including (i) multi-store maternity and infant and juvenile products chains; (ii) on-line retailers; (iii) organic and natural specialty retailers; (iv) department stores; and (v) mass retailers.

International Market Expansion– Testimony to the global strength of its lifestyle brand, Ergobaby derives nearly 58% of its sales from international markets. Similar to the U.S., Ergobaby can continue to leverage its brand equity in the international markets it currently serves to aggressively drive future growth, as well as expand its international presence into new regions. The market for the company’s products abroad continues to grow rapidly, in part due to the growth in the number of births worldwide and the fact that in many parts of Europe and Asia, the concept of baby wearing is a culturally entrenched form of infant and child transport.

New Product Development–Management believes Ergobaby has an opportunity to leverage its unique, authentic lifestyle brand and expand its product line.

Since its founding in 2003, the company has successfully introduced new carrier products to maintain innovation, uniqueness, and freshness within its product line. Specifically, 20 new SKUs were added in 2012, 23 new SKU’s added in 2011 and 22 new SKU’s added in 2010. These product introductions include both evolutionary product introductions, such as new colors and patterns for the company’s current carriers and associated products, as well as entirely new product categories. Major recent new product introductions include the Ergobaby infant insert

Heart2Heart, which modifies the Ergobaby carrier to provide additional support for a baby’s developing spine. Additionally, in 2010, Ergobaby launched the Performance carrier and the Option carrier, the latter which allows the consumer to customize the look of the carrier with optional colored fabrics and designs. In 2011, Ergobaby launched the Daypack which is a hybrid of a Backpack and Diaper Bag that snaps around the Ergobaby Carrier straps to provide a comfortable, hands-free way to tote the day’s supplies in addition to all of your baby essentials. In 2012 Ergobaby introduced the Stowaway Carrier, and a designer carrier collection to include a matching diaper bag. The Stowaway Carrier has the padded straps and waist belt that make all Ergobaby carriers comfortable, yet easily folds into its own front pouch for compact storage.

Orbit Baby was founded in 2004 using its original design of the Orbit Infant System which is a three-piece kit that includes a base, infant car seat, and stroller, using the unique docking technology, (“SmartHub”). Since then, Orbit Baby has successfully introduced the Orbit Bassinet Cradle, and various accessories that has increased its versatility and kept them trend forward. In 2012, Orbit Baby introduced the Double Helix Stroller Frame, Orbit Baby’s complete double stroller solution. The innovative design features a narrow frame with front and back rotating seats. With two SmartHub rings parents have the option to use any existing Orbit Baby seat.

Customers

Ergobaby primarily sells its products through brick-and-mortar retailers, online retailers and distributors and derives approximately 58% of its sales from outside of the U.S. Within the U.S., Ergobaby sells its products through over 650 brick-and-mortar retail customers and small infant and juvenile products chains, representing an estimated 2,000 retail doors. Ergobaby products are sold through its German based subsidiary, Ergobaby Europe, which services brick-and-mortar retailers and online retailers in Germany and France as well as services a network of distributors located in the United Kingdom, Austria, Finland, Russia, Switzerland, Belgium, the Netherlands, Sweden, Norway, Spain, Denmark, Italy, Turkey and the Ukraine. Sales to customers outside of the U.S. and European markets are predominantly serviced through distributors granted rights, though not necessarily exclusive, to sell within a specific geographic region.

Sales & Marketing

Within the U.S., Ergobaby directly employ sales professionals and utilizes independent sales representatives assigned to differing U.S. territories managed by in-house sales professionals. Independent salespeople in the U.S. are paid on a commission basis based on customer type and sales territory.

In Europe, Ergobaby directly employs its salespeople. In Europe, salespeople are paid a base salary and a commission on their sales, which is standard in that territory. Ergobaby Europe handles all Ergobaby distributor orders within the European countries including Russia and Ukraine; all other orders are handled through Ergobaby’s U.S. offices.

Ergobaby has implemented a multi-faceted marketing plan which includes (i) targeted print advertising; (ii) online marketing efforts, including online advertisement, search engine optimization and social networking efforts; (iii) increasing tradeshow attendance; and (iv) increasing promotional activities.

Ergobaby had approximately $10.0 million and $3.5 million in firm backlog orders at December 31, 2012 and 2011, respectively.

Competition

The infant and juvenile products market is fragmented, with a few larger manufacturers and marketers with portfolios of brands and a multitude of smaller, private companies with relatively targeted product offerings.

Within the infant and juvenile products market, Ergobaby’s Carriers primarily compete with companies that market wearable baby carriers. Within the wearable baby carrier market, several distinct segments exist, including (i) slings and wraps; (ii) soft-structured baby carriers; and (iii) hard frame baby carriers.

The primary global competitors in this segment are Baby Bjorn and Manduca, which also market products in the premium price range. Especially in the US, Ergobaby also competes with several smaller companies that have developed wearable carriers, such as Beco, Boba, and L’il Baby. Within the soft-structured baby carrier segment, Ergobaby benefits from strong distribution, good word of mouth, and the functionality of the design.

The Orbit Baby Infant System principally competes with the following premium brand stroller manufacturers:

Suppliers

Ergobaby sources its products from China, Vietnam and India. In 2012, Ergobaby began sourcing non-organic carriers and accessories from a manufacturing facility in Vietnam. China and Vietnam accounted for approximately 69% of Ergobaby’s purchases in 2012. Ergobaby partnered with a manufacturer located in India in 2009, which manufactures Ergobaby’s organic carriers and accessories, and represented approximately 31% of Ergobaby’s purchases in 2012. Ergobaby’s manufacturers in China, Vietnam and India have the additional capacity to accommodate Ergobaby’s projected growth.

Intellectual Property

Ergobaby maintains a utility patent on its standard carrier, which was filed in 2003 and issued January 29, 2009. Notwithstanding this patent, Ergobaby primarily depends on brand name recognition and premium product offering to differentiate itself from competition. Ergobaby also maintains three utility patents for its Orbit Baby SmartHub technology.

Regulatory Environment

Management is not aware of any existing, pending, or contingent liabilities that could have a material adverse effect on the company’s business. The company is proactive regarding regulatory issues and is in compliance with all relevant regulations. Ergobaby maintains adequate product liability insurance coverage and to date has not incurred any losses. Management is not aware of any potential environmental issues.

Employees

As of December 31, 2012 Ergobaby employed 86 persons in 6 locations. None of Ergobaby’s employees are subject to collective bargaining agreements. We believe that Ergobaby’s relationship with its employees is good.

Fox

Overview

Fox, headquartered in Scotts Valley, California, is a branded action sports company that designs, manufactures and markets high-performance suspension products and components for mountain bikes, snowmobiles, motorcycles, all-terrain vehicles (“ATVs”), and other off-road vehicles.

Fox’s products are recognized by manufacturers and consumers as being among the most technically advanced suspension products currently available in the marketplace. Fox’s technical success is demonstrated by its dominance of award winning performances by professional athletes utilizing its suspension products. As a result,

Fox’s suspension components are incorporated by OEM customers on their high-performance models at the top of their product lines. OEMs leverage the strength of Fox’s brand to maintain and expand their own sales and margins. In the Aftermarket segment, customers seeking higher performance select Fox’s suspension components to enhance their existing equipment.

Fox sells to over 175 OEM and over 7,800 Aftermarket customers across its market segments. In each of the years 2012, 2011 and 2010, approximately 81%, 80% and 78% of gross sales were to OEM customers with the remaining sales to Aftermarket customers. Fox’s senior management, collectively, has over 100 years of experience in the suspension design and manufacturing industry and other closely related industries.

For the fiscal years ended December 31, 2012, 2011 and 2010, Fox had net sales of approximately $235.9 million, $197.7 million, and $171.0 million and operating income of $26.2 million, $22.6 million and $19.6 million, respectively. Fox had total assets of $142.8 million, $130.0 million and $130.8 million at December 31, 2012, 2011 and 2010, respectively. Fox’s net sales represented 26.7%, 32.6%, and 33.9% of our consolidated net sales for the years ended December 31, 2012, 2011 and 2010, respectively.

History of Fox

Fox was founded by Bob Fox in 1974 when, having participated in motocross racing, he sought to create a racing suspension shock that performed better than existing coil spring shocks. Working in a friend’s garage, Mr. Fox created the “Fox Air-Shox”. The product was successful and within two years it was used to win the U.S. 500cc National Motocross Championship.

In 1978, Fox began producing high performance suspension products for off-road and motorcycle racing. From 1978 to 1983, Fox suspension users won the 500cc Grand Prix (motocross), Baja 1000 (off-road), AMA Super Bike (motorcycle road racing) and Indy 500 (auto racing) generating greater market awareness for the Fox brand especially among racing enthusiasts.

As Fox grew, the company applied the same core suspension technologies developed for motocross racing to other categories. In 1987, Fox entered the snowmobile market. By 1993, Fox began supplying the mountain bike industry with rear shocks before offering front fork suspensions in 2001. Fox entered the ATV and other off-road markets in the mid-1990s.

We purchased a majority interest in Fox on January 4, 2008.

Industry

Fox provides suspension products for mountain biking and powered vehicles, such as, snowmobiles, all-terrain/utility vehicles, motorcycling/motocross and off-road/specialty vehicles. Over the last three fiscal years mountain biking has represented approximately 67%, 69% and 75%, of Fox’s gross sales and powered vehicles have represented the remainder of gross sales. Fox has focused on the performance and racing segments of the markets noted below, which are considerably smaller than the entire markets.

Mountain Biking – In 2011, the North American bike market generated over $6.0 billion of sales according to the National Bicycle Dealers Association. Mountain bike related sales accounted for approximately 23% of this total according to U.S. Department of Commerce statistics, Gluskin Townley Estimates. These sales were primarily conducted through three channels: mass merchants, chain sporting goods and Independent Bike Dealers (IBDs). These channels are differentiated by the price, quality and selection of the mountain bikes they offer, with the IBD segment, in which Fox competes, consisting of premium priced and highly technical performance bikes.

Mountain biking enthusiasts typically have strong preferences concerning not only the OEM brand but also for the components used by OEM manufacturers. Shocks, forks, wheels and drive-trains strongly influence customers’ buying decisions. OEMs have formed partnerships with premium component manufacturers having strong brands in order to generate increased sales of their fully assembled bikes. Fox’s components are generally selected by OEMs participating in the IBD segment and by Aftermarket consumers seeking increased performance characteristics which is a small portion of the total market

Snowmobiles– In 2011, management estimates that the North American market for new snowmobiles was $1.4 billion. Snowmobiling can be segmented into the following categories: performance/crossover snowmobiles used for a variety of activities including racing; touring/utility snowmobiles that are more comfortable and often seat two people; mountain snowmobiles that are performance-oriented, focusing on vertical geography; trail snowmobiles that are primarily used for riding groomed and un-groomed trails; and youth snowmobiles. Fox provides suspension products in each of these categories.

As a way to stimulate demand for new snowmobiles and entice customers to purchase more premium priced snowmobiles, OEMs will select Fox shocks. Additionally, OEMs offer the Fox’s shock absorbers as upgrades on less expensive models. Aftermarket customers will select Fox components for increased performance characteristics.

All-Terrain Vehicles– In 2011, the North American ATV market was $2.6 billion according to management’s estimates. The market for all-terrain vehicles (ATVs) and utility vehicles can be divided into four segments: Recreation/Utility ATVs that are primarily used for trail riding, hunting and farming; Sport ATVs that are high performance, two-wheel drive machines used for racing and aggressive trail riding; Youth ATVs; and Side-by-Side ATVs. Fox develops and sells shocks into the performance and racing sport, youth and side-by-side sub-segments of the ATV market.

Similar to the snowmobile industry, OEMs will stimulate demand for new ATVs and entice customers to purchase more premium priced ATVs by selecting Fox’s shocks for their premium models. Additionally, OEMs offer the company’s shock absorbers as upgrades on less expensive models. Aftermarket sales are comprised of customers seeking enhanced performance characteristics.

Motorcycles/Motocross– In 2011, the North American sales of motorcycles was $4.5 billion according to management estimates. The motorcycle market consists of all classes of on-road and off-road motorcycles. There are three main categories: On-highway motorcycles that are primarily used on paved roads; Dual motorcycles that are used for both on and off-road activities; and Off-highway motorcycles that are only certified for off-road use. The Off-road category is further segmented into motocross, off-road which includes youth motocross and youth off-road. Currently, OEM needs for suspension products are largely filled by captive suppliers in this category. As such, Fox has focused on the Aftermarket performance racing segments which is considerably smaller than entire motorcycle market. Aftermarket sales are comprised of customers seeking enhanced performance characteristics.

Off-Road Vehicles –In 2011, the North American retail sales of specialty automotive products were $30 billion according to the Specialty Equipment Market Association. Off-road vehicles can be divided into five segments: off-road trucks, buggies, sand buggies, rock crawlers and lifted trucks. Consumers in the truck, buggy, sand buggy and rock crawler categories range from serious racers and enthusiasts to individuals involved primarily in recreational activities. The lifted truck segment, which consists of vehicles that in many cases never leave the highway, is divided generally by price point. Fox’s products target the high-end price point for each of these five segments. Off-road vehicles are generally customized vehicles with Aftermarket components unlike OEM vehicles although some OEM manufacturers are offering limited edition vehicles. Fox primarily sells to Aftermarket consumers seeking increased performance characteristics but has begun some limited sales to OEM manufacturers. FOX also provides suspension to the U.S. Government either directly or through tier one manufacturers.

Products and Services

Fox designs and manufactures suspension products that dissipate the energy and force generated by various ride sport activities. A suspension product allows wheels to move up and down to absorb bumps and shocks while keeping the tires in contact with the ground for better control. Fox’s products use adjustable suspension, progressive spring rates, and low weight combined with structural rigidity. Fox suspension products improve user control for greater performance while maximizing comfort levels.

Each suspension product built at Fox’s manufacturing facilities is assembled according to precise specifications at multiple stages throughout the assembly process to ensure consistently high performance levels and customer satisfaction. Finished parts are built in multiple assembly cells and on an assembly line using precise tooling to ensure manufacturing consistency and product functionality. Fox has developed a number of highly sophisticated assembly machines to ensure consistent high quality.

Competitive Strengths

Proprietary Engineering Expertise –Fox maintains a broad base of technical innovation and design that has been developed over the past 38 years. Fox’s technical expertise enables the development and production of some of the most advanced suspension products available in the market. With its history of innovation and design, Fox has created a deep portfolio of key intellectual property related to suspension technology and applications.

Highly Recognizable Brand– Driven by a long history of innovation, Fox has created a highly respected and well-known brand for advanced suspension products. A product branded with the FOX logo represents the highest level of technical performance for enthusiasts and professionals who require suspension systems capable of handling demanding conditions. The FOX logo is prominently displayed on all of Fox’s products and provides a halo effect for complementary products.

Strong Blue-Chip Customer Relationships– Given the long history of performance for Fox’s suspension products, OEM customers seeking the highest level of quality and technical features for suspension have developed strong long-term relationships with the company.

Business Strategies

Expand Revenues from Powered Vehicles Business –Fox’s focus on developing premier suspension technologies continues to create complementary opportunities across this segment.

Continue to Expand Aftermarket Sales –The sale of Aftermarket parts typically carries higher gross margins than a similar OEM sale. Fox is further investing in its Aftermarket sales infrastructure to foster sales growth in 2013 and beyond. One of the simplest and most effective ways for customers to improve their performance is the purchase and installation of an aftermarket Fox suspension product when compared to the expense of purchasing an entirely new platform.

International Growth– Due to the successful efforts of Fox’s operations teams, distribution to foreign OEMs and distributors is well-established. By selectively increasing infrastructure and honing its focus on identified opportunities, Fox plans to continue its international sales growth. Further, management plans include investigation of other international market opportunities, such as Asian and South American markets. International sales aggregated $149.6 million, $129.9 million and $113.6 million in fiscal 2012, 2011 and 2010, respectively.

Pursue New Market Trends and Opportunities– New trends in action sports can lead to significant market opportunities. Fox’s close association with racing and its professionals allows it to see new trends as they emerge. Depending on the trend, Fox will develop new products that address these needs.

Fox established a manufacturing operation in Taiwan during 2012 and intends to capitalize on new opportunities in Taiwan, as many of Fox’s customers are in Asia.

Research and Development

We believe Fox’s products are among the most technically advanced and rigorously engineered in their markets. They are specifically designed to function and perform under diverse and extreme conditions. Fox’s research and development effort is at the core of its strategy of product innovation and market leadership. Fox’s products feature a combination of innovative design, high-quality materials, and superb functionality and are recognized as being the leaders or among the leaders in all of the market segments in which they participate.

Fox has a robust core research and development team, which has a significant amount of industry experience. In addition to the core engineering group, a large number of other Fox staff members, who also use the company’s products, contribute to the research and development effort at various stages. This may take the form of initial brainstorming sessions or ride testing products in development. Product development also includes collaborating

with customers, field testing by sponsored race teams and working with grass roots riders. This feedback helps ensure products will meet the company’s demanding standards of excellence as well as the constantly changing needs of professional and recreational end users.

Fox’s research and development activities are supported by state-of-the-art engineering software design tools, integrated manufacturing facilities and a performance testing center equipped to ensure product safety, durability and superior performance. The testing center collects data and tests products prior to and after commercial introduction. Suspension products undergo a variety of rigorous performance and accelerated life tests. The research and development portion of our total engineering costs totaled $5.7 million, $5.1 million and $4.2 million in each of the years 2012, 2011 and 2010, respectively.

Customers

Fox’s reputation for product quality, durability and technical excellence has resulted in a customer base that includes some of the world’s leading OEMs and a loyal following of knowledgeable and experienced end users. Fox’s OEM customers are market leaders in their respective categories, and help define, as well as respond to, consumer trends in their respective industries. These customers provide exceptional market support for Fox by including the company’s products on their highest-performing models. OEMs will often use Fox’s components to improve the marketability and demand of their own products.

Fox sells to over 175 OEM customers and over 7,800 Aftermarket customers across its market segments. One customer accounted for approximately 7.0%, 8.1% and 11.0% of net sales for the years ended December 31, 2012, 2011 and 2010, respectively. Fox’s top 10 customers accounted for approximately 51.1%, 51.6% and 53.2% of net sales in 2012, 2011 and 2010, respectively. International sales totaled $149.6 million, $129.9 million and $113.6 million in each of the years 2012, 2011 and 2010, respectively. Sales attributable to countries outside the United States are based on shipment location. The international sales amounts provided do not necessarily reflect the end customer location as many of our products are assembled at international locations with the ultimate customer located in the United States.

Sales and Marketing

Fox employs a number of dedicated sales professionals. Each sales person is fully dedicated to servicing either OEM or Aftermarket customers ensuring that Fox’s customers receive only the most capable person to address their unique needs. Fox strongly believes that providing the best service to its end customers is essential in maintaining its reputational excellence in the marketplace. The sales force receives training on the latest Fox products and technologies in addition to attending trade shows to increase its market knowledge.

The primary goal of the marketing program is to strengthen and promote the FOX brand in the marketplace. Fox increases brand awareness and equity with through a number of marketing channels including: advertisements in publications and websites; team and individual sponsorships; support and promotion at outdoor events; trade shows; website development; and dealer support.

Fox’s business is somewhat seasonal. Historically, net sales and earnings are highest during the third quarter. We believe this seasonality is due to delivery of new products containing our shocks related to the new bike season.

Fox had approximately $43.0 million and $37.0 million in firm backlog orders at December 31, 2012 and 2011, respectively.

Competition

Competition in the high-end performance segment of the suspension market revolves around technical features, performance and durability, customer service, price and reliable order execution. While price is a factor in all purchasing decisions, we believe customers consider Fox’s products to be an outstanding value proposition given their significant performance and other attributes.

Fox competes with several large suspension providers as well as numerous small manufacturers who provide branded and unbranded products. These competitors can be segmented into the following categories:

Mountain Biking – Fox competes with several companies that manufacture front and rear mountain bike suspension products. Management believes these include RockShox (a subsidiary of SRAM Corporation), Tenneco Marzocchi S.r.l. (a subsidiary of Tenneco Inc.), Manitou (a subsidiary of HB Performance Systems), SR Suntour and DT Swiss (a subsidiary of Vereinigte Drahtwerke AG).

Snowmobiles– Within the snowmobile market, Management believes its main competitor is KYB (Kayaba Industry Co., Ltd.). Other suppliers include Öhlins Racing AB, Walker Evans Racing, Works Performance Products and Penske Racing Shocks / Custom Axis, Inc.

All-Terrain Vehicles– A large percentage of the shocks supplied to OEM ATV manufacturers are the result of either long-term supplier relationships or captive business units associated with a specific OEM. Alternatively, ATV manufacturers source suspensions from a variety of suspension manufacturers depending on the final application and performance requirements.

Fox’s management believes its primary competitor outside of captive OEM suppliers is ZF Sachs (ZF Friedrichshafen AG) and Walker Evans Racing. Aftermarket shocks are available from large OEMs plus a number of primarily Aftermarket suppliers including Elka Suspension Inc., Öhlins Racing AB, Works Performance Products and Penske Racing Shocks / Custom Axis, Inc.

Off-Road Vehicles– Within the off-road vehicle category, Fox competes with both branded and unbranded competitors. The two largest competitors to Fox in management’s opinion are ThyssenKrupp Bilstein Suspension GmbH (“Bilstein”) and King Shock Technology, Inc. (“King Shock”). Other competitors include Icon Vehicle Dynamics, Sway-A-Way, Pro Comp Suspension and Rancho (Tenneco).

Suppliers

Fox works closely with its supply base, and depends upon certain suppliers to provide raw inputs, such as forgings and castings and molded polymers that have been optimized for weight, structural integrity, wear and cost. Fox typically has no firm contractual sourcing agreements with these suppliers other than purchase orders.

Depending on component requirements, raw material inputs go through a combination of machining processes including computer numeric control machines, drill stations and lathes. Fox utilizes manufacturing models and workflow analysis tools to minimize bottlenecks and maximize capital asset utilization. After initial machining, components are then outsourced to specialized manufacturers for plating, grinding, anodizing and honing.

Fox’s primary raw materials used in production are aluminum and magnesium. Fox uses multiple suppliers for these raw materials and believes that these raw materials are in adequate supply and are available from many suppliers at competitive prices. Prices for these materials have been increasing but the company is implementing sourcing strategies and value engineering initiatives to offset them.

Intellectual Property

Fox relies upon a combination of patents, trademarks, trade names, licensing arrangements, trade secrets, know-how and proprietary technology in order to secure and protect its intellectual property rights.

Fox’s in-house intellectual property department and in-house counsel diligently protect its new technologies with patents and trademarks and vigorously defend against patent infringement lawsuits. Fox currently owns 31 patents on proprietary technologies for shock absorbers and front fork suspension products and has an additional 78 patent pending applications at the U.S. and European Patent Offices. Fox’s patent portfolio makes it an impediment to competitors to introduce products with comparable features.

Regulatory Environment

Fox’s manufacturing and assembly operations, its facilities and operations are subject to evolving federal, state and local environmental and occupational health and safety laws and regulations. These include laws and regulations governing air emissions, wastewater discharge and the storage and handling of chemicals and hazardous substances. Management believes that Fox is in compliance, in all material respects, with applicable environmental and occupational health and safety laws and regulations. New requirements, more stringent application of existing requirements, or discovery of previously unknown environmental conditions could result in material environmental expenditures in the future.

Additionally, Fox is subject to the jurisdiction of the United States Consumer Product Safety Commission (CPSC) and other federal, state and foreign regulatory bodies. Under CPSC regulations, a manufacturer of consumer goods is obligated to notify the CPSC, if, among other things, the manufacturer becomes aware that one of its products has a defect that could create a substantial risk of injury. If the manufacturer has not already undertaken to do so, the CPSC may require a manufacturer to recall a product, which may involve product repair, replacement or refund. Fox has never had any of its products recalled.

Employees

As of December 31, 2012, Fox employed approximately 534 persons. None of Fox’s employees are subject to collective bargaining agreements. We believe that Fox’s relationship with its employees is good.

Liberty Safe

Overview

Liberty Safe, headquartered in Payson, Utah and founded in 1988, is the premier designer, manufacturer and marketer of home, gun and office safes in North America. From its over 204,000 square foot manufacturing facility, Liberty Safe produces a wide range of home, office and gun safe models in a broad assortment of sizes, features and styles ranging from an entry level product to good, better and best products. Products are marketed under the Liberty Safe brand, as well as a portfolio of licensed and private label brands, including Remington, Cabela’s and John Deere. Liberty Safe’s products are the market share leader and are sold through an independent dealer network (“Dealer sales”) in addition to various sporting goods and home improvement retail outlets (“Non-Dealer sales” or “National sales”). Liberty Safe has the largest independent dealer network in the industry.

Approximately 60% of Liberty Safe’s sales are Non-Dealer sales and 40% are Dealer sales.

For the fiscal years ended December 31, 2012, 2011 and 2010, Liberty Safe had net sales of approximately $91.6 million, $82.2 million and $49.0 million (from its acquisition date), respectively, and operating income of $6.0 million, $4.3 million in the years ended December 31, 2012 and 2011 respectively, and an operating loss of $0.8 million in 2010. Liberty Safe had total assets of $82.4 million, $85.9 million and $83.3 million at December 31, 2012, 2011 and 2010, respectively. Net sales from Liberty Safe represented 10.4%, 13.6% and 9.7% of our consolidated net sales for the year ended December 31, 2012, 2011 and 2010 (from acquisition date), respectively.

History of Liberty Safe

The Liberty Safe brand and its leading market share has been built over a 24 year history of superior product quality, engineering and design innovation, and leading customer service and sales support. Liberty Safe has a long history of continuous improvement and innovative approaches to sales and marketing, product development and manufacturing processes. Significant investments over the last five years have solidified Liberty Safe’s reputation for providing substantial value to retailers and enhanced its long-standing position as the leading producer of premium home, office and gun safes.

Liberty Safe started operations in 1988 and throughout 1991 and 1992, increased its distribution capabilities, establishing a regional sales force model to better serve the Dealer channel. This expanded sales coverage gave Liberty Safe the needed organizational structure to provide ready support and products nationwide, helping to establish its reputation for service to its customers. On the strength of its growing reputation and national sales presence, Liberty Safe achieved the status of the #1 selling safe company in America in 1994, according to Sargent and Greenleaf data, the major lock supplier to the industry, a position that it has maintained to this day. In 2001, Liberty Safe opened its current 204,000 square foot state-of-the-art facility in Payson, UT and consolidated all of its manufacturing and distribution operations to a centralized location. As the only facility in the industry utilizing significant automation and a streamlined roll-form manufacturing process, it represented a significant step forward when compared to the production capabilities of its competitors. Incremental investments following the consolidation have solidified Liberty Safe’s position as the pre-eminent low-cost and most efficient domestic manufacturer.

Beginning in 2007, Liberty Safe reorganized its manufacturing process, retooled its product line for increased standardization throughout the production process and realigned employee incentives to increase labor efficiency. These improvements enabled Liberty Safe to shift from build-to-stock production to build-to-order with shorter lead time requirements, greater labor efficiency and reduced working capital.

During 2011 Liberty Safe constructed a new production line that has allowed Liberty to build entry level safe products in- house. This product was previously sourced from an Asian manufacturer. The production line began operations in February 2012 and Liberty is currently manufacturing two different models of safes on this line which translates into five new SKUs. Liberty invested over $9.0 million to build the line. This investment in production capacity now makes Liberty Safe the largest manufacturer of home, office and gun safes in the world. This added investment in capacity in the U.S. will allow Liberty Safe to provide shorter lead times and competitive pricing to its North American customer base. This will allow Liberty safe to capture additional market share, growing its revenue base and adding more margin dollars to the bottom line. In addition, Liberty Safe will be able to reduce its investment in inventory by no longer having to rely upon long lead times and the inaccuracies of forecasting.

We purchased a majority interest in Liberty Safe on March 31, 2010.

Industry

Liberty Safe competes in the broadly defined North American safe industry which includes fire and document safes, media and data safes, depository safes, gun safes and cabinets, home safes and hotel safes. According to Global Industry Analysts, (“GIA”) March 2008 report, the global safe industry was estimated to be approximately $2.9 billion of wholesale sales in 2008, and grew consistently at an estimated CAGR of 4.3% from 2000 to 2009. Consistent growth has been one of the defining characteristics of this industry, and GIA anticipates it will continue at a rate of 4.4% from 2009 through 2015.

Products & Services

Liberty Safe offers home, office and gun safes with minimum retail prices ranging from $400 to $8,000.

Liberty Safe produces 39 home and gun safe models with the most varied assortment of sizes, feature upgrades, accessories and styling options in the industry. Liberty Safe’s premium home and gun safe product line covers sizes from 12 cu. ft. to 50 cu. ft. with smaller sizes available for its personal home safe. Liberty Safe markets its products under Company-owned brands and a portfolio of licensed and private label brands, including Remington, Cabela’s, John Deere and others. Liberty Safe also sells commercial safes, vault doors and a number of accessories and options. The overwhelming majority of revenue is derived from the sales of safes.

Competitive Strengths

#1 Premium Home and Gun Safe Brand with Strong Momentum in the Market –Liberty Safe achieved the status of #1 selling safe company in America in 1994 (per statistics provided by Sargent & Greenleaf, the primary lock supplier to the industry) and maintains this prominent position today. The market for premium home and gun safes

is highly fragmented, and management estimates that Liberty Safe’s net sales are over twice those of its next largest competitor in the category. Liberty Safe continues to gain market share from the various smaller participants who lack the distribution and sales and marketing capabilities of Liberty Safe.

State-of-the-Art and Scalable Operations– Over the past five years, management has constructed a highly scalable operational platform and infrastructure that has positioned Liberty Safe for substantial sales growth and enhanced profitability in the coming years. Under current ownership, the company has transitioned itself from a manufacturing oriented operating culture to a demand-based, sales-oriented organization. The company’s strategic transition required the implementation of a demand-based sales and operating platform, which included (i) new equipment to drive automation and capacity improvements; (ii) reengineered product lines and production processes to drive efficiency through greater standardization in production; and (iii) new employee incentives tied to labor efficiency, which has improved worker performance as well as employee attitude. These initiatives are enhanced by an experienced senior executive team, a balanced sourcing and in-house manufacturing production strategy, advanced distribution capabilities and sophisticated IT systems. Liberty has combined its demand-based sales and operating initiatives with upgraded production equipment to drive multiple operational improvements. Since 2007, the company has reduced its lead times from 4 – 6 weeks to approximately seven days. These shorter production cycles coupled with better demand forecasting have significantly reduced working capital needs for the business by reducing domestic inventory from approximately 7,000 units to 3,000 units since 2007. Improved automation and workflow organization have decreased labor hours over 20% per safe from 8.3 in 2005 to 6.3 in 2012 for rolled steel safes. These recent initiatives combined with the company’s cumulative historical investments in operational capabilities have created a lasting competitive advantage over its smaller competitors, who utilize labor-intensive operations and lack the company’s lean manufacturing culture.

Historically, Liberty Safe maintained an optimal mix of in-house and Asian-sourced manufacturing in order to improve its ability to meet customer inventory needs. Beginning in 2012 Liberty Safe began manufacturing entry level safes that were previously sourced from an Asian manufacturer, on its new production line. As a result, over 90% of Liberty Safe products will now be made in the U.S. The average labor hours per entry level safe on this new production line is two hours. The increased capacity also positions Liberty Safe to grow its revenue base by more than was otherwise possible and profit from the product produced when compared to the all-in cost of the Asian sourced product.

The company has leased for the past ten years a manufacturing and distribution facility in Payson, Utah that represents the most scalable domestic facility in the industry. The company’s multi-faceted production capabilities allow for substantial flexibility and scalable capacity, thus assuring a level of supply chain execution far superior to any of its competitors.

Reputation for High Quality Products – Liberty Safe is passionate about offering only the highest quality products on a consistent basis, which over the years has gained it an enviable reputation and a key point of differentiation from its competitors. Liberty Safe distinguishes its products through tested security and fire protection features and industry leading design focused on functionality and aesthetics. The design of its safes meet rigorous internal benchmarks for security and fire protection, with most receiving certification from Underwriters Laboratory, Inc. (“UL”), the leading product safety standard certification, for its security capabilities. Additionally, Liberty Safe’s investment in accessories and feature options have made Liberty safes the most visually appealing and functional in the industry, while providing more customized solutions for retailers and consumers.

Trusted Supplier to National Retailer and Dealer Accounts– Liberty Safe’s comprehensive, high-quality product offering and sophisticated sales and marketing programs have made it a critical supplier to a diverse group of national accounts and dealers. Initially a key supplier primarily to the dealer channel, it has expanded its business with national accounts, such as Gander Mountain, Cabela’s and Lowe’s. Liberty Safe provides a superior value proposition as a supplier for its national retailers and dealers via its well-recognized brands, lifetime product warranty, tailored merchandising, category management solutions and superior supply chain execution. Further, Liberty Safe’s products generate more profitable floor-space, with both high absolute gross profit and retail margins over 30%. High retail profitability plus increased inventory turns has entrenched Liberty Safe as a key partner in customers’ success in the safe category. As a core element of building its relationships, Liberty Safe has invested significantly in making its retailers better salespeople through a proprietary suite of training tools, including in-store training, new product demonstrations, online education programs and sales strategy literature.

Business Strategies

Liberty has experienced strong historical growth while executing on multiple new sales and operational initiatives, positioning it to continue to increase its scale and improve profitability. Liberty’s growth strategy is rooted in the sales and marketing and operational initiatives that have spurred its expansion into new accounts and increased penetration of existing accounts. Liberty has significant opportunity in its existing channels to continue to build upon its already strong market share. In addition to growth within its current channels, Liberty’s core competencies can be successfully applied to ventures in the broader security equipment market. Liberty has explored certain of these opportunities, but due to the prioritization of operational initiatives and expansion opportunities within existing channels, they have not been aggressively pursued. Potential near-to-medium term areas for expansion of Liberty’s platform include:

Customers

Liberty Safe prides itself on its ability to provide high-quality, innovative products and industry-leading customer service. As a result, it has fostered long-term relationships with leading national retailers (National or Non-Dealer) as well as numerous Dealers, enabling Liberty Safe to achieve considerable brand awareness and channel exposure. Traditionally, the Dealer channel has accounted for the majority of the Liberty Safe’s net sales, but through significant investment in its national accounts sales and marketing efforts, Liberty Safe has also become the leading supplier to National accounts. Expansion into National accounts is part of Liberty Safe’s strategy to reach a broader customer base and more varied demographics. National account customers include sporting goods retailers, farm & fleet retailers, home improvement retailers and club retailers. As of December 31, 2012, 2011 and 2010, Liberty Safe had 16, 16 and 22 National account customers, respectively, that are estimated to have accounted for approximately 57% of net sales.

Dealer customers include local hunting and fishing stores, hardware stores and numerous other local, independent store models. As of December 31, 2012, 2011 and 2010, there were 343, 325 and 322 Dealers that accounted for 43%, 39% and 38% of net sales, respectively.

Cabela’s, Liberty Safe’s largest customer accounted for approximately 15.0%, 13.2% and 15.2% of net sales in 2012, 2011 and 2010, respectively.

Sales & Marketing

Liberty Safe possesses robust sales and marketing capabilities in the safe industry. Liberty Safe utilizes separate sales teams for National accounts and Dealers, which enables it to provide more focused and effective strategies to manage and develop relationships within different channels. Liberty Safe has made significant recent investments in the development of a comprehensive sales and marketing program including merchandising, sales training and tools, promotions and supply chain management. Through these various initiatives, Liberty Safe offers highly adaptable programs to suit the varying needs of its retailers. This has enabled Liberty Safe to become a key supplier across diverse channels. Liberty Safe began advertising nationally on the Glen Beck show in the second half of 2010. This advertising has been highly successful and Liberty has continued this advertising in 2011 and 2012.

Liberty Safe’s comprehensive service offering makes it uniquely suited to service national retailers in a variety of channels. Liberty Safe has designed a Store-within-a-Store program and a more comprehensive Safe Category Management program to build relationships and increase its importance to retailers. Primarily utilized with sporting goods retailers, the Store-within-a-Store concept successfully integrates the effective sales strategies of its dealers for selling a high-price point, niche product into a larger store format. Centered on communicating the benefits of its products to customers, the program enables retailers to more effectively up-sell customers through a good-better-best merchandising platform, increasing margin and inventory turns for its retailers. Liberty’s Safe Category Management program builds on the Store-within-a-Store concept to provide greater sales and marketing control and more complete inventory management solutions. This program facilitates Liberty Safe becoming the sole supplier to retailers, providing large incremental expansion and stronger relationships at accounts. No other market participant has the capabilities to provide a comprehensive suite of customer service solutions to national retailers, such as customized SKU programs, a Store-within-a-Store program and a Safe Category Management program.

Competition

Liberty Safe is the premier brand in the premium home and gun safe industry, with an estimated 34% market share in the category, two times the next competitor. Liberty is in a class by itself when it comes to manufacturing technology and efficiency and supply chain capabilities. Competitors are generally more heavily focused on either smaller, sourced safes or large, domestically produced safes. Competitive domestic manufacturers run “blacksmith” type factories that are small, inefficient and require a tremendous amount of manual labor that produces inconsistent product. In addition, many of Liberty’s competitors are directly tied to a third-party brand, such as Browning, Winchester or RedHead / Bass Pro.

Liberty competes with other safe manufacturers based on price, breadth of product line, technology, product supply chain capabilities and marketing capabilities.

Channel diversity in the premium home and gun safe industry is rare, with most companies having greater concentration in either the dealer channel or national accounts, but rarely having the supply chain capabilities or sales and marketing programs to service both channels effectively. Major competitors have limited sales and marketing departments and programs, making it difficult for them to expand sales and gain market share.

Suppliers

Liberty’s primary raw materials are steel, sheetrock, wood, locks, handles and fabric, for which it receives multiple shipments per week. Materials, on average, account for approximately 65% of the total cost of a domestically produced safe, with steel accounting for approximately 55% of material costs. Liberty purchases its materials from a combination of domestic and foreign suppliers. Historically, Liberty Safe has been able to pass on raw material price increases to its customers.

Liberty purchased over 29 million pounds of steel in 2012 primarily from domestic suppliers, using contracts that lock in prices two to three quarters in advance. Liberty Safe purchases coiled and flat steel in gauges from four to 14. Liberty Safe specifies rigorous requirements related to surface and edge finish and grain direction. All steel products are checked to ASTM specification and dimensional tolerances before entering the production process.

Liberty Safe had approximately $13.2 million and $8.1 million in firm backlog orders at December 31, 2012 and 2011, respectively.

Intellectual Property

Liberty Safe relies upon a combination of patents and trademarks in order to secure and protect its intellectual property rights.

Liberty Safe currently owns 25 trademarks and 2 patents on proprietary technologies for safe products.

Research and Development

Liberty’s approach to R&D and innovation drives customer satisfaction and differentiation from competitive products. Liberty is the engineering and design leader in its sector, due to a history of first-to-market features and standard-setting design improvements. The Company’s proactive solicitation of feedback and constant interaction with consumers and retail customers across diverse channels and geographies enables the Company to stay at the forefront of customer demands. The Company’s approach to product development increases the likelihood of market acceptance by creating products that are more relevant to consumers’ demands. Research and development costs were $0.8 million, $0.7 million and $0.1 million in 2012, 2011 and 2010, respectively.

The below charts represents some of the recent innovations in product design (and functionality) that have come about from the Company’s dedication to R&D:

In addition to product enhancements, new products, such as theFatboy^® Series,have been launched from Liberty’s commitment to R&D.

Based on consumer feedback, Liberty saw demand for safes that were capable of holding more valuables within the safe but at a lower price point than Liberty’s current large safe models. Within 3 months of conception, the Company introduced the successfulFatboy^® series in February 2010. TheFatboy^® andFatboy Jr.^® models, which are wider and deeper than traditional safes, were a natural complement to Liberty’s current products, targeted at a specific customer need. The introduction and success of theFatboy^® series demonstrates Liberty’s proven ability to recognize market opportunities, engineer a responsive product and execute market delivery. Beginning in 2012 Liberty Safe will introduce five new SKUs, manufactured on its new production line, with a unique locking system to service the entry level safe market.

Regulatory Environment

Liberty Safes’ management believes that Liberty Safe is in compliance, in all material respects, with applicable environmental and occupational health and safety laws and regulations.

Employees

Liberty Safe is led by a highly knowledgeable management team of sporting goods and consumer products industry veterans that possess a balanced combination of industry experience and functional expertise. The majority of the team members have worked together since 2000.

As of December 31, 2012, Liberty Safe had 342 full-time employees and 113 temporary employees. The Company’s labor force is non-union. Management believes that Liberty Safe has an excellent relationship with its employees.

Tridien

Overview

Tridien, headquartered in Coral Springs, Florida, is a leading designer and manufacturer of powered and non-powered medical therapeutic support surfaces and patient positioning devices serving the acute care, long-term care and home health care markets. Tridien is one of the nation’s leading designers and manufacturers of specialty therapeutic support surfaces with manufacturing operations in multiple locations to better serve a national customer base.

Tridien, together with its subsidiary companies, provides customers the opportunity to source leading surface technologies from the designer and manufacturer.

Tridien develops products both independently and in partnership with large distribution intermediaries. Medical distribution companies then sell or rent the therapeutic support surfaces, sometimes in conjunction with bed frames and accessories to one of three end markets: (i) acute care, (ii) long term care and (iii) home health care. The level of sophistication largely varies for each product, as some patients require simple foam mattresses (“non-powered” support surfaces) while others may require electronically controlled, low air loss, lateral rotation, pulmonary therapy or alternating pressure surfaces (“powered” support surfaces). The design, engineering and manufacturing of all products are completed in-house (with the exception of a select group of products, which are manufactured in Taiwan) and are FDA compliant.

For the fiscal years ended December 31, 2013, 2012 2011 and 2010,2011, Tridien had net sales of approximately $55.9$60.1 million, $55.9 million and $61.1$55.9 million, respectively, and an operating loss of $10.2 million in 2013 and operating income of $3.7 million and $5.0 million for the years ended December 31, 2012 and $8.0 million,2011, respectively. Tridien had total assets of $39.2 million, $44.5 million $42.8 million and $44.2$42.8 million at December 31, 2013, 2012 2011 and 2010,2011, respectively. Net sales from Tridien represented 6.3%6.1%, 9.2%6.3% and 12.1%9.2% of our consolidated net sales for fiscal years 2013, 2012 and 2011, respectively.

During the second quarter of 2013, one of Tridien’s largest customers lost a large contract program that was being serviced substantially with Tridien product. The expected lost sales and 2010, respectively.net income were significant enough to trigger an interim goodwill and indefinite-lived asset impairment analysis. The result of these analyses supported the carrying value of goodwill but indicated that sales of product, reliant on trade names, could not fully support the carrying value of Tridien’s trade names. As such we wrote down the value of the trade names by $0.9 million to a carrying value of approximately $0.6 million at that time. At December 31, 2013, further revenue decreases together with a revised 2014 forecast that indicated little to no growth prompted an additional interim impairment analysis as of December 31, 2013. The result of the year end goodwill impairment analysis (step 1) indicated that goodwill was impaired. Further testing (step 2) resulted in the following; (i) goodwill was written down $11.5 million to a balance of $16.8 million; (ii) trade names were written down $0.4 million to a balance of $0.2 million

and; (iii) technology assets were written down $0.1 million to a balance of $0.8 million. The result of the Step 2 analyses is preliminary and based on various selected market data and comparable company’s results. To the extent that the final analysis contains revised and/or updated assumptions the impairment charge will change.

History

Tridien was initially formed in February 2006 by CGI and Hollywood Capital, Inc., a private investment management firm led by Tridien’s former Chief Executive Officer, to acquire AMF and SenTech, located in Corona, CA and Coral Springs, FL, respectively. AMF Support Surfaces, Inc. is a leading manufacturer of non-powered mattress systems, seating cushions and patient positioning devices. SenTech is a leading designer and manufacturer of advanced electronically controlled, powered, alternating pressure, pulmonary therapy, low air loss and lateral rotation specialty support surfaces for the wound care industry. Prior to its acquisition, SenTech had established a premium brand as a result of its proprietary technologies, in the less price sensitive therapeutic market while AMF competed primarily in the preventive care market.

On October 5, 2006, Tridien acquired the patient positioning device business of Anatomic Concepts. The acquired operations were merged into Tridien’s operations. Anatomic is a leading supplier of operating suite patient positioning devices and support surfaces focused on the price sensitive long term care and home healthcare markets.

On June 27, 2007, Tridien purchased PrimaTech, a lower price-point distributor of powered medical support surfaces to the long term care and home healthcare markets. PrimaTech’s products are predominately designed in the U.S. and manufactured pursuant to an exclusivea manufacturing agreement with an FDA registered manufacturing partner located in Taiwan.

In October 2009, Tridien and Hollywood Capital, Inc. terminated their management services agreement which provided for, among other things, two principals of Hollywood Capital, Inc., resigning from their roles of Chief Executive Officer and Chief Financial Officer of Tridien. Upon termination of the agreement, Tridien appointed a new Chief Executive Officer and a new Chief Financial Officer.

We purchased a controlling interest in Tridien from CGI on August 1, 2006.

Industry

The medical support surfaces industry is fragmented and comprised of many small participants and niche manufacturers. Tridien’s consolidation platform allows customers to source all leading support surface technologies for the acute care, long term care and home health care from a single source. Tridien is a vertically integrated

company with engineering, design and research, manufacturing and support performed in house to quickly bring new, innovative products and technologies to market while maintaining high quality standards in its manufacturing process.

Immobility caused by injury, old age, chronic illness or obesity is the main cause for the development of pressure ulcers. In these cases, the person lying in the same position for a long period of time puts pressure on the bony prominence of the body surface. This pressure, if continued for a sustained period, can close blood capillaries that provide oxygen and nutrition to the skin. Over a period of time, these cells deprived of oxygen, begin to break down and form sores. In addition to constant or excessive pressure, other contributing factors to the development of pressure ulcers include heat, moisture, friction and sheer, or pull on the skin due to the underlying fabric.

The prevalence rate of pressure ulcers in acute care facilities has been seen as high as 34%, with costs of treatment as high as $70,000 per ulcer, causing an estimated burden of an additional 22 million Medicare hospital days. Further it has been reported that another 2% to 28% of all nursing home patients suffer from pressure ulcers. We believe that providing the right therapeutic support surfaces is a necessary intervention for these ulcers. Management believes the need for medical support surfaces will continue to grow due to several favorable demographic and industry trends including the increasing incidence of obesity in the United States, increasing life expectancies and an increasing emphasis on prevention of pressure ulcers by hospitals and long term care facilities.

According to the Centers for Disease Control and Prevention, between the years 1980 and 2000, obesity rates more than doubled among adults in the United States. Studies have shown that this increase in obesity has been a key factor in rising medical costs over the last 15 years. According to one study done at Emory University, increases in obesity rates have accounted for 27% of the increase in health care spending between 1987 and 2001. As an individual’s weight increases, so too does the probability that the individual will become immobile and, according to studies performed at the University of North Carolina, greater than 40% of obese adults aged 54 to 73 were at least partially immobile. As individuals become less mobile, they are more likely to require either preventative mattresses to better disperse weight and reduce pressure areas or therapeutic mattresses to shift weight and pressure. Similar to how obesity increases the occurrence of immobility, so too does an aging society. As life expectancy expands in the U.S. due to improved health care and nutrition, so too does the probability that an individual will be immobile for a portion of their lives. In addition, as individual’s age, skin becomes more susceptible to breakdown increasing the likelihood of developing pressure ulcers.

Beyond favorable demographic trends, Tridien’s management believes healthcare institutions are placing an increased emphasis on the prevention of pressure ulcers. According to Medicare guidelines, hospitals are no longer able to be reimbursed for the treatment of in-house acquired wounds,pressure ulcers, resulting in continued focus by hospitals in preventing and treating such wounds. The end result is that if an at-risk patient develops pressure ulcers while at the hospital; the hospital is required to bear the cost of healing.treating that condition. As a result of increasing litigation and the high cost of healing pressures ulcers, healthcare institutions are now focusinghave focused on usingincreasing the care process to prevent pressure reliefulcer development for which use of pressure relieving equipment to reduceis an integral facet. Although some advanced pressure relieving equipment offerings employ key differentiated technologies, other less advanced offerings use more basic technologies. Reduced reimbursement rates from healthcare reform combined with increased imports from low cost global competitors have accelerated commoditization and pricing pressures in the incidence of in-house acquired pressure ulcers.less advanced categories and in some cases a migration towards the less advanced products.

Products and Services

Specialty beds, mattress replacements and mattress overlays (i.e. therapeutic surfaces) are the primary products currently available for pressure relief and pressure reduction to treat and prevent decubitus ulcers. The market for specialty beds and therapeutic surfaces include the acute care centers, long-term care centers, nursing home centers and home healthcare settings. Medical therapeutic surfaces are designed to have preventative and/or therapeutic uses. The basic product categories are as follows:

line incorporate its intellectual property in the way these automatic changes take place. This patented technology allows for a more comfortable surface with aggressive therapeutic alternating pressure. Another typical type of powered surface is Lateral Rotation which can aid in laterally turning a patient to reduce risks associated with fluid building up in a patient’s lungs. A feature often found in Powered Surfaces is Low Air Loss that allows air to flow from the mattress to address the moisture and temperature environment on the patient’s skin, contributing factors to pressure ulcers. Tridien currently produces patented designs for the performance of both Alternating Pressure and Low Air Loss mattress systems which management believes provides the optimum healing therapy for the patient. Powered support surfaces are typically used in acute care settings and when more aggressive therapy is needed. Powered Support Surfaces represented approximately 18.7% of net sales in 2012 and 19.6% of net sales in 2011 and 2010.

Business Strategies

Tridien’s management is focused on strategies to grow revenues, improve operating efficiency and improving gross margins. Of particular note, Tridien has completed four acquisitions since its inception and has achieved numerous benefits to this consolidation within the support surfaces industry. The following is a discussion of these strategies:

Research and Development

Tridien develops surfaces both independently and in partnership with large distribution intermediaries. Initial steps of product development are typically made independently. Larger distribution market participants will typically require further product development testing to ensure mattress systems have the desired properties while smaller distributors will tend to buy more standardized products, especially on the non-powered products. Tridien has dedicated professionals, including individuals focused on process engineering, design engineering, and electrical engineering, working on the development of Tridien’s next generation of therapeutic surfaces and is currently investing in its future focus of advanced wound care technologies.

Tridien is working to develop the next generation of products in surfaces. The new product development process often requires 2 to 6 months for non-powered products and 12 to 24 months for powered products, of research, engineering and testing cooperation. Tridien will provide technical support and repair services for its products as well, a differentiating characteristic valued by its customers. The expected increase in spending will allow Tridien to focus on the next generation products. During the years ended December 31, 2013, and 2012 and 2011, Tridien incurred $2.4 million, $2.1 million and $1.8 million, respectively, in research and development costs.

Customers

Tridien’s largest customer accounted for 26.3%, 33.4% and 38.2% of gross sales in 2013, 2012 and 2011, respectively. Another customer accounted for 23.5%, 26.0% and 25.2% of sales in 2013, 2012 and 2011, respectively. Approximately 68.4%, 66.6% and 64.1% of Tridien’s sales have been to its three largest customers in 2013, 2012 and 2011, respectively. Tridien’s top ten customers accounted for 85.1%, 79.7% and 84.5% of gross sales in 2013, 2012 and 2011, respectively.

Substantially all revenue is derived from sales within the United States.

Tridien had approximately $3.4 million and $2.4 million in firm backlog orders at December 31, 2013 and 2012, respectively.

Sales and Marketing

Support surfaces are primarily sold through distributors, who either rent or sell to acute care (hospitals) facilities, long term care facilities and home health care organizations. The acute care distribution market for support surfaces is dominated by large suppliers such as Stryker Corporation and Hill-Rom Holdings Inc. Other national distributors usually provide specific types of support surface technology. Beyond national distribution intermediaries there are numerous smaller more regional distributors who will purchase support surfaces developed by Tridien as certain brand lines are known in the market as providing proven therapy.

Tridien has developed a full range of support surface products that are sold or rented to healthcare distributors and occasionally sold directly to the end customer. Tridien also provides technical support and repair services for its products, an offering valued by customers.

Competition

The competition in the medical support surfaces market is based predominantly on product performance, features, price and durability. Other factors may include the technological ability of a manufacturer to customize their product offering to meet the needs of large distributors. Tridien competes with manufacturers of varying sizes who then sell predominantly through distributors to the acute care, long term care and home health care markets. Specific competitors include, Span America and other smaller competitors. Tridien differentiates itself from these competitors based on its patented technologies, quality of the products it manufacturers as well as its design and engineering capabilities to produce a full spectrum of surfaces that provide the greatest therapeutic outcome for every price point. While many competitors specialize in the production of a single type of support surface, and often outsource certain manufacturing as skills required to develop and manufacture products vary by materials used, Tridien is able to offer its customers a full spectrum of support surfaces nationwide.

Span America Medical Systems (NASDAQ: SPAN):($7674 million in fiscal 20122013 sales) Span America’s medical division includes the sales of skin care products, bedside mats, and foam mattress overlays and replacement mattresses, including the PressureGuard therapeutic mattress, Span-Aid patient positioners (used to elevate and support body parts) and Dish pressure-relief seat cushions to aid wound healing. Span America reported that approximately 30%34% of their revenue in 20122013 was attributed to their therapeutic support surface segment. Span America also supplies safety cathetersbed frames, other medical and makes specialty packaging products for use in outdoor furniture.consumer bedding products.

Business Strategies

Tridien’s management is focused on strategies to grow revenues, improve operating efficiency and improving gross margins. Of particular note, Tridien has completed four acquisitions since its inception and has achieved numerous benefits to this consolidation within the support surfaces industry. The following is a discussion of these strategies:

Offer customers high quality, consistent product, on a national basis –Products produced by Tridien and its competitors are typically bulky in nature and may not be conducive to shipping. Management believes that many of its competitors do not have the scale or resources required to produce support surfaces for national distributors and believes that customers value manufacturers with the scale and sophistication required to meet these needs. Tridien offers its customers the highest standards of quality through its robust Quality Management Systems. All Tridien facilities are ISO 13485 registered.

Research and Development

Tridien develops surfaces both independently and in partnership with large distribution intermediaries. Initial steps of product development are typically made independently. Larger distribution market participants will typically require further product development testing to ensure mattress systems have the desired properties while smaller distributors will tend to buy more standardized products, especially on the non-powered products. Tridien has dedicated professionals, including individuals focused on process engineering, design engineering, and electrical engineering, working on the development of the company’s next generation of therapeutic surfaces and is currently investing in its future focus of advanced wound care technologies.

Tridien is working to develop the next generation of products in surfaces. The new product development process often requires 2 to 6 months for prevention products and 12 to 24 months for treatment products, of research, engineering and testing cooperation. Tridien will provide technical support and repair services for its products as well, a differentiating characteristic valued by its customers. The expected increase in spending will allow Tridien to focus on the next generation products. During the years ended December 31, 2012, 2011 and 2010, Tridien incurred $2.1 million, $1.8 million and $1.3 million, respectively, in research and development costs.

Sales and Marketing

Support surfaces are primarily sold through distributors, who either rent or sell to acute care (hospitals) facilities, long term care facilities and home health care organizations. The acute care distribution market for support surfaces is dominated by large suppliers such as Stryker Corporation and Hill-Rom Holdings Inc. Other national distributors usually provide specific types of support surface technology. Beyond national distribution intermediaries there are numerous smaller more regional distributors who will purchase support surfaces developed by Tridien as certain brand lines are known in the market as providing proven therapy.

Tridien has developed a full range of support surface products that are sold or rented to healthcare distributors and occasionally sold directly to the end customer. Tridien also provides technical support and repair services for its products, an offering valued by all customers. While contracts with large distributors typically do not include minimum purchase orders, agreements typically call for rolling forecasts of orders to be given at the end of each month for the following three months.

Customers

During the fourth quarter of 2010 two of Tridien’s largest customers merged. The combined entity accounted for 33.4%, 38.2% and 39.1% of gross sales in 2012., 2011 and 2010, respectively. Another customer accounted for 26.0%, 25.2% and 24.0% of sales in 2012, 2011 and 2010, respectively. Approximately 66.6%, 64.1% and 63.5% of Tridien’s sales have been to its three largest customers in 2012, 2011 and 2010, respectively. Tridien’s top ten customers accounted for 79.7%, 84.5% and 82.8% of gross sales in 2012, 2011 and 2010, respectively.

Substantially all revenue is derived from sales within the United States.

Tridien had approximately $2.4 million and $1.6 million in firm backlog orders at December 31, 2012 and 2011, respectively.

Suppliers

Tridien’s two primary raw materials used in manufacturing are polyurethane foam and fabric (primarily nylon and polycarbonate fabrics). Among Tridien’s largest raw material suppliers are Foamex International, Inc., Dartex Coatings, Inc. and Uretek, LLC. Tridien uses multiple suppliers for foam and fabric and believes that these raw materials are in adequate supply and are available from many suppliers at competitive prices. We expect these costs, particularly those related to polyurethane foam to increase during fiscal 20122014 due to recent trends in related commodity prices. Actions taken by manufacturers of petro-chemical commodities such as capacity reductions could influence price changes from our supplier. The cost of raw materials as a percentage of sales was approximately 51% of gross sales in fiscal 2013, 48% of gross sales in fiscal 2012 and 48% of gross sales in fiscal 2011 and 46% of gross sales in fiscal 2010.2011.

Intellectual Property

Tridien has 12 patents issued, filed from 1996 to 2005, and has 12 filed and pending patents.

Regulatory Environment

The FDCA, and regulations issued or proposed there under, provide for regulation by the Food and Drug Administration (FDA) of the marketing, manufacture, labeling, packaging and distribution of medical devices, including Tridien’s products. These regulations require, among other things that medical device manufacturers register with the FDA, list devices manufactured by them, and file various inspections by regulatory authorities and must comply with good manufacturing practices as required by the FDA and state regulatory authorities. Tridien’s management believes that the companyTridien is in substantial compliance with all applicable regulations.

Employees

As of December 31, 2012,2013, Tridien employed 284282 persons in all its locations together with 77103 temporary employees. None of Tridien’s employees are subject to collective bargaining agreements. We believe that Tridien’s relationship with its employees is good.

ITEM 1A – RISK FACTORS

Risks Related to Our Business and Structure

We are a Company with limited history and may not be able to continue to successfully manage our businesses on a combined basis.

We were formed on November 18, 2005 and have conducted operations since May 16, 2006. Although our management team has extensive experience in acquiring and managing small and middle market businesses, our failure to continue to develop and maintain effective systems and procedures, including accounting and financial reporting systems, to manage our operations as a consolidated public company, may negatively impact our ability to optimize the performance of our Company, which could adversely affect our ability to pay distributions to our shareholders. In addition, in that case, our consolidated financial statements might not be indicative of our financial condition, business and results of operations.

Our future success is dependent on the employees of our Manager and the management teams of our businesses, the loss of any of whom could materially adversely affect our financial condition, business and results of operations.

Our future success depends, to a significant extent, on the continued services of the employees of our Manager, most of whom have worked together for a number of years. While our Manager will have employment agreements with certain of its employees, including our Chief Financial Officer, these employment agreements may not prevent our Manager’s employees from leaving or from competing with us in the future. Our Manager does not have an employment agreement with our Chief Executive Officer.

The future success of our businesses also depends on their respective management teams because we operate our businesses on a stand-alone basis, primarily relying on existing management teams for management of their day-to-day operations. Consequently, their operational success, as well as the success of our internal growth strategy, will be dependent on the continued efforts of the management teams of the businesses. We provide such persons with equity incentives in their respective businesses and have employment agreements and/or non-competition agreements with certain persons we have identified as key to their businesses. However, these measures may not prevent the departure of these managers. The loss of services of one or more members of our management team or the management team at one of our businesses could materially adversely affect our financial condition, business and results of operations.

We face risks with respect to the evaluation and management of future platform or add-on acquisitions.

A component of our strategy is to continue to acquire additional platform subsidiaries, as well as add-on businesses for our existing businesses. Generally, because such acquisition targets are held privately, we may experience difficulty in evaluating potential target businesses as the information concerning these businesses is not publicly available. In addition, we and our subsidiary companies may have difficulty effectively managing or integrating acquisitions. We may experience greater than expected costs or difficulties relating to such acquisition, in which case, we might not achieve the anticipated returns from any particular acquisition, which may have a material adverse effect on our financial condition, business and results of operations.

We may not be able to successfully fund future acquisitions of new businesses due to the lack of availability of debt or equity financing at the Company level on acceptable terms, which could impede the implementation of our acquisition strategy and materially adversely impact our financial condition, business and results of operations.

In order to make future acquisitions, we intend to raise capital primarily through debt financing at the Company level, additional equity offerings, the sale of stock or assets of our businesses, and by offering equity in the Trust or our businesses to the sellers of target businesses or by undertaking a combination of any of the above. Since the timing and size of acquisitions cannot be readily predicted, we may need to be able to obtain funding on short notice to benefit fully from attractive acquisition opportunities. Such funding may not be available on acceptable terms. In

addition, the level of our indebtedness may impact our ability to borrow at the Company level. Another source of capital for us may be the sale of additional shares, subject to market conditions and investor demand for the shares at prices that we consider to be in the interests of our shareholders. These risks may materially adversely affect our ability to pursue our acquisition strategy successfully and materially adversely affect our financial condition, business and results of operations.

While we intend to make regular cash distributions to our shareholders, the Company’s board of directors has full authority and discretion over the distributions of the Company, other than the profit allocation, and it may decide to reduce or eliminate distributions at any time, which may materially adversely affect the market price for our shares.

To date, we have declared and paid quarterly distributions, and although we intend to pursue a policy of paying regular distributions, the Company’s board of directors has full authority and discretion to determine whether or not a distribution by the Company should be declared and paid to the Trust and in turn to our shareholders, as well as the amount and timing of any distribution. In addition, the management fee and profit allocation and put price will be payment obligations of the Company and, as a result, will be paid, along with other Company obligations, prior to the payment of distributions to our shareholders. The Company’s board of directors may, based on their review of our financial condition and results of operations and pending acquisitions, determine to reduce or eliminate distributions, which may have a material adverse effect on the market price of our shares.

We will rely entirely on receipts from our businesses to make distributions to our shareholders.

The Trust’s sole asset is its interest in the Company, which holds controlling interests in our businesses. Therefore, we are dependent upon the ability of our businesses to generate earnings and cash flow and distribute them to us in the form of interest and principal payments on indebtedness and, from time to time, dividends on equity to enable us, first, to satisfy our financial obligations and, second to make distributions to our shareholders. This ability may be subject to limitations under laws of the jurisdictions in which they are incorporated or organized. If, as a consequence of these various restrictions, we are unable to generate sufficient receipts from our businesses, we may not be able to declare, or may have to delay or cancel payment of, distributions to our shareholders.

We do not own 100% of our businesses. While the Company is towe receive cash payments from our businesses which are in the form of interest payments, debt repayment and dividends, if any dividends were to be paid by our businesses, they would be shared pro rata with the minority shareholders of our businesses and the amounts of dividends made to minority shareholders would not be available to us for any purpose, including Company debt service or distributions to our shareholders. Any proceeds from the sale of a business will be allocated among us and the minoritynon-controlling shareholders of the business that is sold.

The Company’s board of directors has the power to change the terms of our shares in its sole discretion in ways with which you may disagree.

As an owner of our shares, you may disagree with changes made to the terms of our shares, and you may disagree with the Company’s board of directors’ decision that the changes made to the terms of the shares are not materially adverse to you as a shareholder or that they do not alter the characterization of the Trust. Your recourse, if you disagree, will be limited because our Trust Agreement gives broad authority and discretion to our board of directors. However, the Trust Agreement does not relieve the Company’s board of directors from any fiduciary obligation that is imposed on them pursuant to applicable law. In addition, we may change the nature of the shares to be issued to raise additional equity and remain a fixed-investment trust for tax purposes.

Certain provisions of the LLC Agreement of the Company and the Trust Agreement make it difficult for third parties to acquire control of the Trust and the Company and could deprive you of the opportunity to obtain a takeover premium for your shares.

The amended and restated LLC Agreement of the Company, which we refer to as the LLC Agreement, and the amended and restated Trust Agreement of the Trust, which we refer to as the Trust Agreement, contain a number of

provisions that could make it more difficult for a third party to acquire, or may discourage a third party from acquiring, control of the Trust and the Company. These provisions include, among others:

These provisions, as well as other provisions in the LLC Agreement and Trust Agreement may delay, defer or prevent a transaction or a change in control that might otherwise result in you obtaining a takeover premium for your shares.

We may have conflicts of interest with the noncontrolling shareholders of our businesses.

The boards of directors of our respective businesses have fiduciary duties to all their shareholders, including the Company and noncontrolling shareholders. As a result, they may make decisions that are in the best interests of their shareholders generally but which are not necessarily in the best interest of the Company or our shareholders. In dealings with the Company, the directors of our businesses may have conflicts of interest and decisions may have to be made without the participation of directors appointed by the Company, and such decisions may be different from those that we would make.

Our third party credit facility exposes us to additional risks associated with leverage and inhibits our operating flexibility and reduces cash flow available for distributions to our shareholders.

At December 31, 2012,2013, we had approximately $252.2$279.8 million outstanding under our Term Loan Facility and $24.0$1.6 million outstanding under our Revolving Credit Facility.Facility (representing outstanding letters of credit). We expect to increase our level of debt in the future. The terms of our Revolving Credit Facility contains a number of affirmative and restrictive covenants that, among other things, require us to:

If we violate any of these covenants, our lender may accelerate the maturity of any debt outstanding and we may be prohibited from making any distributions to our shareholders. Such debt is secured by all of our assets, including the stock we own in our businesses and the rights we have under the loan agreements with our businesses. Our ability to meet our debt service obligations may be affected by events beyond our control and will depend primarily upon cash produced by our businesses. Any failure to comply with the terms of our indebtedness could materially adversely affect us.

Changes in interest rates could materially adversely affect us.

Our Credit Facility bears interest at floating rates which will generally change as interest rates change. We bear the risk that the rates we are charged by our lender will increase faster than the earnings and cash flow of our businesses, which could reduce profitability, adversely affect our ability to service our debt, cause us to breach covenants contained in our Revolving Credit Facility and reduce cash flow available for distribution, any of which could materially adversely affect us.

We may engage in a business transaction with one or more target businesses that have relationships with our officers, our directors, our Manager or CGI, which may create potential conflicts of interest.

We may decide to acquire one or more businesses with which our officers, our directors, our Manager or CGI have a relationship. While we might obtain a fairness opinion from an independent investment banking firm, potential conflicts of interest may still exist with respect to a particular acquisition, and, as a result, the terms of the acquisition of a target business may not be as advantageous to our shareholders as it would have been absent any conflicts of interest.

We are exposed to risks relating to evaluations of controls required by Section 404 of the Sarbanes-Oxley Act of 2002.

We are required to comply with Section 404 of the Sarbanes-Oxley Act of 2002. While we have concluded that at December 31, 2012,2013, we have no material weaknesses in our internal controls over financial reporting we cannot assure you that we will not have a material weakness in the future. A “material weakness” is a control deficiency, or combination of significant deficiencies that results in more than a remote likelihood that a material misstatement of the annual or interim financial statements will not be prevented or detected. If we fail to maintain a system of internal controls over financial reporting that meets the requirements of Section 404, we might be subject to sanctions or investigation by regulatory authorities such as the SEC or by the New York Stock Exchange. Additionally, failure to comply with Section 404 or the report by us of a material weakness may cause investors to lose confidence in our financial statements and our stock price may be adversely affected. If we fail to remedy any material weakness, our financial statements may be inaccurate, we may not have access to the capital markets, and our stock price may be adversely affectedaffected.

CGI may exercise significant influence over the Company.

CGI, through a wholly owned subsidiary, owns 7,931,000 or approximately 16.4% of our shares and may have significant influence over the election of directors in the future.

If, in the future, we cease to control and operate our businesses, we may be deemed to be an investment company under the Investment Company Act of 1940, as amended.

Under the terms of the LLC Agreement, we have the latitude to make investments in businesses that we will not operate or control. If we make significant investments in businesses that we do not operate or control or cease to operate and control our businesses, we may be deemed to be an investment company under the Investment Company Act of 1940, as amended, or the Investment Company Act. If we were deemed to be an investment

company, we would either have to register as an investment company under the Investment Company Act, obtain

exemptive relief from the SEC or modify our investments or organizational structure or our contract rights to fall outside the definition of an investment company. Registering as an investment company could, among other things, materially adversely affect our financial condition, business and results of operations, materially limit our ability to borrow funds or engage in other transactions involving leverage and require us to add directors who are independent of us or our Manager and otherwise will subject us to additional regulation that will be costly and time-consuming.

Risks Relating to Our Manager

Our Chief Executive Officer, directors, Manager and management team may allocate some of their time to other businesses, thereby causing conflicts of interest in their determination as to how much time to devote to our affairs, which may materially adversely affect our operations.

While the members of our management team anticipate devoting a substantial amount of their time to the affairs of the Company, only Mr. James Bottiglieri,Ryan Faulkingham, our Chief Financial Officer, devotes substantially all of his time to our affairs. Our Chief Executive Officer, directors, Manager and members of our management team may engage in other business activities. This may result in a conflict of interest in allocating their time between our operations and our management and operations of other businesses. Their other business endeavors may be related to CGI, which will continue to own several businesses that were managed by our management team prior to our initial public offering, or affiliates of CGI as well as other parties. Conflicts of interest that arise over the allocation of time may not always be resolved in our favor and may materially adversely affect our operations. See the section entitled “Certain Relationships and Related Party Transactions” for the potential conflicts of interest of which you should be aware.

Our Manager and its affiliates, including members of our management team, may engage in activities that compete with us or our businesses.

While our management team intends to devote a substantial majority of their time to the affairs of the Company, and while our Manager and its affiliates currently do not manage any other businesses that are in similar lines of business as our businesses, and while our Manager must present all opportunities that meet the Company’s acquisition and disposition criteria to the Company’s board of directors, neither our management team nor our Manager is expressly prohibited from investing in or managing other entities, including those that are in the same or similar line of business as our businesses. In this regard, the management services agreement and the obligation to provide management services will not create a mutually exclusive relationship between our Manager and its affiliates, on the one hand, and the Company, on the other.

Our Manager need not present an acquisition or disposition opportunity to us if our Manager determines on its own that such acquisition or disposition opportunity does not meet the Company’s acquisition or disposition criteria.

Our Manager will review any acquisition or disposition opportunity presented to the Manager to determine if it satisfies the Company’s acquisition or disposition criteria, as established by the Company’s board of directors from time to time. If our Manager determines, in its sole discretion, that an opportunity fits our criteria, our Manager will refer the opportunity to the Company’s board of directors for its authorization and approval prior to the consummation thereof; opportunities that our Manager determines do not fit our criteria do not need to be presented to the Company’s board of directors for consideration. If such an opportunity is ultimately profitable, we will have not participated in such opportunity. Upon a determination by the Company’s board of directors not to promptly pursue an opportunity presented to it by our Manager in whole or in part, our Manager will be unrestricted in its ability to pursue such opportunity, or any part that we do not promptly pursue, on its own or refer such opportunity to other entities, including its affiliates.

We cannot remove our Manager solely for poor performance, which could limit our ability to improve our performance and could materially adversely affect the market price of our shares.

Under the terms of the management services agreement, our Manager cannot be removed as a result of underperformance. Instead, the Company’s board of directors can only remove our Manager in certain limited circumstances or upon a vote by the majority of the Company’s board of directors and the majority of our shareholders to terminate the management services agreement. This limitation could materially adversely affect the market price of our shares.

If the management services agreement is terminated, our Manager, as holder of the Allocation Interests in the Company, has the right to cause the Company to purchase such Allocation Interests, which may materially adversely affect our liquidity and ability to grow.

If the management services agreement is terminated at any time other than as a result of our Manager’s resignation or if our Manager resigns on any date that is at least three years after the closing of our initial public offering, our Manager will have the right, but not the obligation, for one year from the date of termination or resignation, as the case may be, to cause the Company to purchase the Allocation Interests for the put price. If our Manager elects to cause the Company to purchase its Allocation Interests, we are obligated to do so and, until we have done so, our ability to conduct our business, including incurring debt, would be restricted and, accordingly, our liquidity and ability to grow may be adversely affected.

Our Manager can resign on 90180 days’ notice and we may not be able to find a suitable replacement within that time, resulting in a disruption in our operations that could materially adversely affect our financial condition, business and results of operations as well as the market price of our shares.

Our Manager has the right, under the management services agreement, to resign at any time on 90180 days’ written notice, whether we have found a replacement or not. If our Manager resigns, we may not be able to contract with a new manager or hire internal management with similar expertise and ability to provide the same or equivalent services on acceptable terms within 90 days, or at all, in which case our operations are likely to experience a disruption, our financial condition, business and results of operations as well as our ability to pay distributions are likely to be adversely affected and the market price of our shares may decline. In addition, the coordination of our internal management, acquisition activities and supervision of our businesses is likely to suffer if we are unable to identify and reach an agreement with a single institution or group of executives having the expertise possessed by our Manager and its affiliates. Even if we are able to retain comparable management, whether internal or external, the integration of such management and their lack of familiarity with our businesses may result in additional costs and time delays that could materially adversely affect our financial condition, business and results of operations.

The liability associated with the supplemental put agreement is difficult to estimate and may be subject to substantial period-to-period changes, thereby significantly impacting our future results of operations.

The Company will record the supplemental put agreement at its fair value at each balance sheet date by recording any change in fair value through its income statement. The fair value of the supplemental put agreement is largely related to the value of the profit allocation that our Manager, as holder of Allocation Interests, will receive. The valuation of the supplemental put agreement requires the use of complex financial models, which require sensitive assumptions and estimates. If our assumptions and estimates result in an over-estimation or under-estimation of the fair value of the supplemental put agreement, the resulting fluctuation in related liabilities could cause a material adverse effect on our future results of operations.

We must pay our Manager the management fee regardless of our performance.

Our Manager is entitled to receive a management fee that is based on our adjusted consolidated net assets, as defined in the management services agreement, regardless of the performance of our businesses. The calculation of the management fee is unrelated to the Company’s net income. As a result, the management fee may incentivize our Manager to increase the amount of our assets, for example, the acquisition of additional assets or the incurrence of third party debt rather than increase the performance of our businesses.

We cannot determine the amount of the management fee that will be paid over time with any certainty.

The management fee paid to CGM for the year ended December 31, 2012,2013, was $17.8$18.6 million. The management fee is calculated by reference to the Company’s adjusted net assets, which will be impacted by the acquisition or disposition of businesses, which can be significantly influenced by our Manager, as well as the performance of our businesses and other businesses we may acquire in the future. Changes in adjusted net assets and in the resulting management fee could be significant, resulting in a material adverse effect on the Company’s results of operations. In addition, if the performance of the Company declines, assuming adjusted net assets remains the same, management fees will increase as a percentage of the Company’s net income.

We cannot determine the amount of profit allocation that will be paid over time with any certainty.

We cannot determine the amount of profit allocation that will be paid over time with any certainty. Such determination would be dependent on the potential sale proceeds received for any of our businesses and the performance of the Company and its businesses over a multi-year period of time, among other factors that cannot be predicted with certainty at this time. Such factors may have a significant impact on the amount of any profit allocation to be paid. Likewise, such determination would be dependent on whether certain hurdles were surpassed giving rise to a payment of profit allocation. Any amounts paid in respect of the profit allocation are unrelated to the management fee earned for performance of services under the management services agreement.

The fees to be paid to our Manager pursuant to the management services agreement, the offsetting management services agreements and transactionintegration services agreements and the profit allocation to be paid to certain members of our Manager, as holderholders of the Allocation Interests, pursuant to the LLC Agreement may significantly reduce the amount of cash available for distribution to our shareholders.

Under the management services agreement, the Company will be obligated to pay a management fee to and, subject to certain conditions, reimburse the costs and out-of-pocket expenses of our Manager incurred on behalf of the Company in connection with the provision of services to the Company. Similarly, our businesses will be obligated to pay fees to and reimburse the costs and expenses of our Manager pursuant to any offsetting management services agreements entered into between our Manager and one of our businesses, or any transactionintegration services agreements to which such businesses are a party. In addition, our Manager,Sostratus LLC, as holder of the Allocation Interests, will be entitled to receive profit allocations and may be entitled to receive the put price.allocations. While it is difficult to quantify with any certainty the actual amount of any such payments in the future, we do expect that such amounts could be substantial. See the section entitled “Certain Relationships and Related Party Transactions” for more information about these payment obligations of the Company. The management fee and profit allocation and put price will be payment obligations of the Company and, as a result, will be paid, along with other Company obligations, prior to the payment of distributions to shareholders. As a result, the payment of these amounts may significantly reduce the amount of cash flow available for distribution to our shareholders.

Our Manager’s influence on conducting our operations, including on our conducting of transactions, gives it the ability to increase its fees, which may reduce the amount of cash flow available for distribution to our shareholders.

Under the terms of the management services agreement, our Manager is paid a management fee calculated as a percentage of the Company’s adjusted net assets for certain items and is unrelated to net income or any other performance base or measure. Our Manager, controls, may advise us to consummate transactions, incur third party debt or conduct our operations in a manner that, in our Manager’s reasonable discretion, are necessary to the future growth of our businesses and are in the best interests of our shareholders. These transactions, however, may increase the amount of fees paid to our Manager. Our Manager’s ability to increase its fees, through the influence it has over our operations, may increase the compensation paid by our Manager. Our Manager’s ability to influence the management fee paid to it by us could reduce the amount of cash flow available for distribution to our shareholders.

Fees paid by the Company and our businesses pursuant to transactionintegration services agreements do not offset fees payable under the management services agreement and will be in addition to the management fee payable by the Company under the management services agreement.

The management services agreement provides that our businesses may enter into transactionintegration services agreements with our Manager pursuant to which our businesses will pay fees to our Manager.Manager for services provided by our Manager relating to the integration of a business’s financial reporting, computer systems and decision making and management processes into our operations following an acquisition of such business. See the section entitled “Certain Relationships and Related Party Transactions” for more information about these agreements. Unlike fees paid under the offsetting management services agreements, fees that are paid pursuant to such transactionintegration services agreements will not reduce the management fee payable by the Company. Therefore, such fees will be in excess of the management fee payable by the Company.

The fees to be paid to our Manager pursuant to these transactionintegration service agreements will be paid prior to any principal, interest or dividend payments to be paid to the Company by our businesses, which will reduce the amount of cash flow available for distributions to shareholders.

Our Manager’s profit allocation may induce itour Manager to make suboptimal decisions regarding our operations.

Our Manager,Sostratus LLC, as holder of 100% of theour Allocation Interests, in the Company, will receive a profit allocation based on ongoing cash flows and capital gains in excess of a hurdle rate. Certain members of our Manager are owners of Sostratus LLC. In this respect, a calculation and payment of profit allocation may be triggered upon the sale of one of our businesses. As a result, our Manager may be incentivized to recommend the sale of one or more of our businesses to the Company’s board of directors at a time that may not be optimal for our shareholders.

The obligations to pay the management fee and profit allocation including the put price, may cause the Company to liquidate assets or incur debt.

If we do not have sufficient liquid assets to pay the management fee and profit allocation including the put price, when such payments are due, we may be required to liquidate assets or incur debt in order to make such payments. This circumstance could materially adversely affect our liquidity and ability to make distributions to our shareholders.

Risks Related to Taxation

Our shareholders will be subject to tax on their share of the Company’s taxable income, which taxes or taxable income could exceed the cash distributions they receive from the Trust.

For so long as the Company or the Trust (if it is treated as a tax partnership) would not be required to register as an investment company under the Investment Company Act of 1940 and at least 90% of our gross income for each taxable year constitutes “qualifying income”‘‘qualifying income’’ within the meaning of Section 7704(d) of the Internal Revenue Code of 1986, as amended (the “Code”‘‘Code’’), on a continuing basis, we will be treated, for U.S. federal income tax purposes, as a partnership and not as an association or a publicly traded partnership taxable as a corporation. In that case our shareholders will be subject to U.S. federal income tax and, possibly, state, local and foreign income tax, on their share of the Company’s taxable income, which taxes or taxable income could exceed the cash distributions they receive from the Trust. There is, accordingly, a risk that our shareholders may not receive cash distributions equal to their portion of our taxable income or sufficient in amount even to satisfy their personal tax liability those results from that income. This may result from gains on the sale or exchange of stock or debt of subsidiaries that will be allocated to shareholders who hold (or are deemed to hold) shares on the day such gains were realized if there is no corresponding distribution of the proceeds from such sales, or where a shareholder disposes of shares after an allocation of gain but before proceeds (if any) are distributed by the Company. Shareholders may also realize income in excess of distributions due to the Company’s use of cash from operations or sales proceeds for uses other than to make distributions to shareholders, including funding acquisitions, satisfying short- and long-term working capital needs of our businesses, or satisfying known or unknown liabilities. In addition, certain financial covenants with the Company’s lenders may limit or prohibit the distribution of cash to shareholders. The Company’s board of directors is also free to change the Company’s distribution policy. The Company is under no obligation to make distributions to shareholders equal to or in excess of their portion of our taxable income or sufficient in amount even to satisfy the tax liability that results from that income.

All of the Company’s income could be subject to an entity-level tax in the United States, which could result in a material reduction in cash flow available for distribution to holders of shares of the Trust and thus could result in a substantial reduction in the value of the shares.

We do not expect the Company to be characterized as a corporation so long as it would not be required to register as an investment company under the Investment Company Act of 1940 and 90% or more of its gross income for each taxable year constitutes “qualifying income.” The Company expects to receive more than 90% of its gross income each year from dividends, interest and gains on sales of stock or debt instruments, including principally from or with respect to stock or debt of corporations in which the Company holds a majority interest. The Company intends to treat all such dividends, interest and gains as “qualifying income.”

If the Company fails to satisfy this “qualifying income” exception, the Company will be treated as a corporation for U.S. federal (and certain state and local) income tax purposes, and would be required to pay income tax at regular corporate rates on its income. Taxation of the Company as a corporation could result in a material reduction in distributions to our shareholders and after-tax return and, thus, could likely result in a reduction in the value of, or materially adversely affect the market price of, the shares of the Trust.

A shareholder may recognize a greater taxable gain (or a smaller tax loss) on a disposition of shares than expected because of the treatment of debt under the partnership tax accounting rules.

We may incur debt for a variety of reasons, including for acquisitions as well as other purposes. Under partnership tax accounting principles (which apply to the Company), debt of the Company generally will be allocable to our shareholders, who will realize the benefit of including their allocable share of the debt in the tax basis of their investment in shares. At the time a shareholder later sells shares, the selling shareholder’s amount realized on the sale will include not only the sales price of the shares but also the shareholder’s portion of the Company’s debt

allocable to his shares (which is treated as proceeds from the sale of those shares). Depending on the nature of the Company’s activities after having incurred the debt, and the utilization of the borrowed funds, a later sale of shares could result in a larger taxable gain (or a smaller tax loss) than anticipated.

Our structure involves complex provisions of U.S. federal income tax law for which no clear precedent or authority may be available. Our structure also is subject to potential legislative, judicial or administrative change and differing interpretations, possibly on a retroactive basis.

The U.S. federal income tax treatment of holders of the Shares depends in some instances on determinations of fact and interpretations of complex provisions of U.S. federal income tax law for which no clear precedent or authority may be available. You should be aware that the U.S. federal income tax rules are constantly under review by persons involved in the legislative process, the IRS, and the U.S. Treasury Department, frequently resulting in revised interpretations of established concepts, statutory changes, revisions to regulations and other modifications and interpretations. The IRS pays close attention to the proper application of tax laws to partnerships. The present U.S. federal income tax treatment of an investment in the Shares may be modified by administrative, legislative or judicial interpretation at any time, and any such action may affect investments and commitments previously made. For example, changes to the U.S. federal tax laws and interpretations thereof could make it more difficult or impossible to meet the qualifying income exception for us to be treated as a partnership for U.S. federal income tax purposes that is not taxable as a corporation, affect or cause us to change our investments and commitments, affect the tax considerations of an investment in us and adversely affect an investment in our Shares. Our organizational documents and agreements permit the Board of Directors to modify our operating agreement from time to time, without the consent of the holders of Shares, in order to address certain changes in U.S. federal income tax regulations, legislation or interpretation. In some circumstances, such revisions could have a material adverse impact on some or all of the holders of our Shares. Moreover, we will apply certain assumptions and conventions in an attempt to comply with applicable rules and to report income, gain, deduction, loss and credit to holders in a manner that reflects such holders’ beneficial ownership of partnership items, taking into account variation in ownership interests during each taxable year because of trading activity. However, these assumptions and

conventions may not be in compliance with all aspects of applicable tax requirements. It is possible that the IRS will assert successfully that the conventions and assumptions used by us do not satisfy the technical requirements of the Code and/or Treasury regulations and could require that items of income, gain, deductions, loss or credit, including interest deductions, be adjusted, reallocated, or disallowed, in a manner that adversely affects holders of the Shares.

Risks Relating Generally to Our Businesses

The recent disruption in the overall economy and the financial markets will adversely impact our business.

Many industries, including our businesses, have been affected by current economic factors, including the significant deterioration of global economic conditions, declines in employment levels, and shifts in consumer spending patterns. The recent disruptions in the overall economy and volatility in the financial markets have greatly reduced, and may continue to reduce, consumer confidence in the economy, negatively affecting consumer spending, which could be harmful to our financial position. Disruptions in the overall economy may also lead to a lower collection rate on billings as consumers or businesses are unable to pay their bills in a timely fashion. Decreased cash flow generated from our products may adversely affect our financial position and our ability to fund our operations. In addition, macro-economic disruptions, as well as the restructuring of various commercial and investment banking organizations, could adversely affect our ability to access the credit markets. The disruption in the credit markets may also adversely affect the availability of financing to support our strategy for growth through future acquisitions. There is a risk that government responses to the disruptions in the financial markets will not restore consumer confidence, stabilize the markets, or increase liquidity and the availability of credit.

Impairment of our intangible assets could result in significant charges that would adversely impact our future operating results.

We have significant intangible assets, including goodwill with an indefinite life, which are susceptible to valuation adjustments as a result of changes in various factors or conditions. The most significant intangible assets on our balance sheet are goodwill, technologies, customer relationships and trademarks we acquired when we acquired our

businesses. Customer relationships are amortized on a straight line basis based upon the pattern in which the economic benefits of customer relationships are being utilized. Other identifiable intangible assets are amortized on a straight-line basis over their estimated useful lives. We assess the potential impairment of goodwill and indefinite lived intangible assets on an annual basis, as well as whenever events or changes in circumstances indicate that the carrying value may not be recoverable. We assess definite lived intangible assets whenever events or changes in circumstances indicate that the carrying value may not be recoverable.

Factors that could trigger impairment include the following:

As of December 31, 2012,2013, we had identified indefinite lived intangible assets with a carrying value in our financial statements of $132.4$131.3 million, and goodwill of $257.5$246.6 million.

At Tridien we wrote down approximately $12.9 million in goodwill and intangible assets during 2013 as a result of lower than anticipated sales and sales growth. Further adverse changes in the operations of our businesses or other unforeseeable factors could result in an additional impairment charge in future periods that would impact our results of operations and financial position in that period.

Our businesses are subject to unplanned business interruptions which may adversely affect our performance.

Operational interruptions and unplanned events at one or more of our production facilities, such as explosions, fires, inclement weather, natural disasters, accidents, transportation interruptions and supply could cause substantial losses in our production capacity. Furthermore, because customers may be dependent on planned deliveries from us, customers that have to reschedule their own operations due to our delivery delays may be able to pursue financial claims against us, and we may incur costs to correct such problems in addition to any liability resulting from such claims. Such interruptions may also harm our reputation among actual and potential customers, potentially resulting in a loss of business. To the extent these losses are not covered by insurance, our financial position, results of operations and cash flows may be adversely affected by such events.

Our businesses rely and may rely on their intellectual property and licenses to use others’ intellectual property, for competitive advantage. If our businesses are unable to protect their intellectual property, are unable to obtain or retain licenses to use other’s intellectual property, or if they infringe upon or are alleged to have infringed upon others’ intellectual property, it could have a material adverse effect on their financial condition, business and results of operations.

Each businesses’ success depends in part on their, or licenses to use others’, brand names, proprietary technology and manufacturing techniques. These businesses rely on a combination of patents, trademarks, copyrights, trade secrets, confidentiality procedures and contractual provisions to protect their intellectual property rights. The steps they have taken to protect their intellectual property rights may not prevent third parties from using their intellectual property and other proprietary information without their authorization or independently developing intellectual property and other proprietary information that is similar. In addition, the laws of foreign countries may not protect our businesses’ intellectual property rights effectively or to the same extent as the laws of the United States.

Stopping unauthorized use of their proprietary information and intellectual property, and defending claims that they have made unauthorized use of others’ proprietary information or intellectual property, may be difficult, time-consuming and costly. The use of their intellectual property and other proprietary information by others, and the use by others of their intellectual property and proprietary information, could reduce or eliminate any competitive advantage they have developed, cause them to lose sales or otherwise harm their business.

Our businesses may become involved in legal proceedings and claims in the future either to protect their intellectual property or to defend allegations that they have infringed upon others’ intellectual property rights. These claims and any resulting litigation could subject them to significant liability for damages and invalidate their property rights. In addition, these lawsuits, regardless of their merits, could be time consuming and expensive to resolve and could divert management’s time and attention. The costs associated with any of these actions could be substantial and could have a material adverse effect on their financial condition, business and results of operations.

The operations and research and development of some of our businesses’ services and technology depend on the collective experience of their technical employees. If these employees were to leave our businesses and take this knowledge, our businesses’ operations and their ability to compete effectively could be materially adversely impacted.

The future success of some of our businesses depends upon the continued service of their technical personnel who have developed and continue to develop their technology and products. If any of these employees leave our businesses, the loss of their technical knowledge and experience may materially adversely affect the operations and research and development of current and future services. We may also be unable to attract technical individuals with comparable experience because competition for such technical personnel is intense. If our businesses are not able to replace their technical personnel with new employees or attract additional technical individuals, their operations may suffer as they may be unable to keep up with innovations in their respective industries. As a result, their ability to continue to compete effectively and their operations may be materially adversely affected.

If our businesses are unable to continue the technological innovation and successful commercial introduction of new products and services, their financial condition, business and results of operations could be materially adversely affected.

The industries in which our businesses operate, or may operate, experience periodic technological changes and ongoing product improvements. Their results of operations depend significantly on the development of commercially viable new products, product grades and applications, as well as production technologies and their ability to integrate new technologies. Our future growth will depend on their ability to gauge the direction of the commercial and technological progress in all key end-use markets and upon their ability to successfully develop, manufacture and market products in such changing end-use markets. In this regard, they must make ongoing capital investments.

In addition, their customers may introduce new generations of their own products, which may require new or increased technological and performance specifications, requiring our businesses to develop customized products. Our businesses may not be successful in developing new products and technology that satisfy their customers’ demand and their customers may not accept any of their new products. If our businesses fail to keep pace with evolving technological innovations or fail to modify their products in response to their customers’ needs in a timely manner, then their financial condition, business and results of operations could be materially adversely affected as a result of reduced sales of their products and sunk developmental costs. These developments may require our personnel staffing business to seek better educated and trained workers, who may not be available in sufficient numbers.

Our businesses could experience fluctuations in the costs of raw materials as a result of inflation and other economic conditions, which fluctuations could have a material adverse effect on their financial condition, business and results of operations.

Changes in inflation could materially adversely affect the costs and availability of raw materials used in our manufacturing businesses, and changes in fuel costs likely will affect the costs of transporting materials from our suppliers and shipping goods to our customers, as well as the effective areas from which we can recruit temporary staffing personnel. For example, for Advanced Circuits, the principal raw materials consist of copper and glass and represent approximately 20% of net sales in 2012.2013. Prices for these key raw materials may fluctuate during periods of high demand. The ability by these businesses to offset the effect of increases in raw material prices by increasing their prices is uncertain. If these businesses are unable to cover price increases of these raw materials, their financial condition, business and results of operations could be materially adversely affected.

Our businesses do not have and may not have long-term contracts with their customers and clients and the loss of customers and clients could materially adversely affect their financial condition, business and results of operations.

Our businesses are and may be, based primarily upon individual orders and sales with their customers and clients. Our businesses historically have not entered into long-term supply contracts with their customers and clients. As such, their customers and clients could cease using their services or buying their products from them at any time and for any reason. The fact that they do not enter into long-term contracts with their customers and clients means that they have no recourse in the event a customer or client no longer wants to use their services or purchase products from them. If a significant number of their customers or clients elect not to use their services or purchase their products, it could materially adversely affect their financial condition, business and results of operations.

Our businesses are and may be subject to federal, state and foreign environmental laws and regulations that expose them to potential financial liability. Complying with applicable environmental laws requires significant resources, and if our businesses fail to comply, they could be subject to substantial liability.

Some of the facilities and operations of our businesses are and may be subject to a variety of federal, state and foreign environmental laws and regulations including laws and regulations pertaining to the handling, storage and transportation of raw materials, products and wastes, which require and will continue to require significant expenditures to remain in compliance with such laws and regulations currently in place and in the future.

Compliance with current and future environmental laws is a major consideration for our businesses as any material violations of these laws can lead to substantial liability, revocations of discharge permits, fines or penalties. Because some of our businesses use hazardous materials and generate hazardous wastes in their operations, they may be subject to potential financial liability for costs associated with the investigation and remediation of their own sites, or sites at which they have arranged for the disposal of hazardous wastes, if such sites become contaminated. Even if they fully comply with applicable environmental laws and are not directly at fault for the contamination, our businesses may still be liable. Costs associated with these risks could have a material adverse effect on our financial condition, business and results of operations.

Defects in the products provided by our companies could result in financial or other damages to their customers, which could result in reduced demand for our companies’ products and/or liability claims against our companies.

As manufacturers and distributors of consumer products, certain of our companies are subject to various laws, rules and regulations, which may empower governmental agencies and authorities to exclude from the market products that are found to be unsafe or hazardous. Under certain circumstances, a governmental authority could require our companies to repurchase or recall one or more of their products. Additionally, laws regulating certain consumer products exist in some cities and states, as well as in other countries in which they sell their products, where more restrictive laws and regulations exist or may be adopted in the future. Any repurchase or recall of such products could be costly and could damage the reputation of our companies. If any of our companies were required to remove, or voluntarily remove, their products from the market, their reputation may be tarnished and they may have large quantities of finished products that they cannot sell. Additionally, our companies may be subject to regulatory actions that could harm their reputations, adversely impact the values of their brands and/or increase the cost of production.

Our companies also face exposure to product liability claims in the event that one of their products is alleged to have resulted in property damage, bodily injury or other adverse effects. Defects in products could result in customer dissatisfaction or a reduction in, or cancellation of, future purchases or liability claims against our

companies. If these defects occur frequently, our reputation may be impaired permanently. Defects in products could also result in financial or other damages to customers, for which our companies may be asked or required to compensate their customers, in the form of substantial monetary judgments or otherwise. While our companies take the steps deemed necessary to comply with all laws and regulations, there can be no assurance that rapidly changing safety standards will not render unsaleable products that complied with previously-applicable safety standards. As a result, these types of claims could have a material adverse effect on our businesses, results of operations and financial condition.

Some of our businesses are subject to certain risks associated with the movement of businesses offshore.

Some of our businesses are potentially at risk of losing business to competitors operating in lower cost countries. An additional risk is the movement offshore of some of our businesses’ customers, leading them to procure products or services from more closely located companies. Either of these factors could negatively impact our financial condition, business and results of operations.

Loss of key customers of some of our businesses could negatively impact financial condition.

Some of our businesses have significant exposure to certain key customers, the loss of which could negatively impact our financial condition, business and results of operations.

Our businesses are subject to certain risks associated with their foreign operations or business they conduct in foreign jurisdictions.

Some of our businesses have and may have operations or conduct business outside the United States. Certain risks are inherent in operating or conducting business in foreign jurisdictions, including exposure to local economic conditions; difficulties in enforcing agreements and collecting receivables through certain foreign legal systems; longer payment cycles for foreign customers; adverse currency exchange controls; exposure to risks associated with changes in foreign exchange rates; potential adverse changes in political environments; withholding taxes and

restrictions on the withdrawal of foreign investments and earnings; export and import restrictions; difficulties in enforcing intellectual property rights; and required compliance with a variety of foreign laws and regulations. These risks individually and collectively have the potential to negatively impact our financial condition, business and results of operations.

New regulations related to conflict minerals may force certain of our businesses to incur additional expenses, may make the supply chain of such businesses more complex and may result in damage to the customer relationships of such businesses.

In August 2012, as mandated by the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, the Securities and Exchange Commission promulgated final rules regarding disclosure of the use of certain minerals and their derivatives, including tin, tantalum, tungsten and gold, known as “conflict minerals,” if these minerals are necessary to the functionality or production of the company’s products. These regulations require such issuers to report annually whether or not such minerals originate from the Democratic Republic of Congo (DRC) and adjoining countries and in some cases to perform extensive due diligence on their supply chains for such minerals.

The implementation of these new requirements could adversely affect the sourcing, availability and pricing of conflict minerals used in the manufacturing processes for certain products of our businesses. In addition, some of our businesses may incur additional costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals used in the products of certain of our businesses. Since the supply chain of certain of our businesses is complex, the due diligence procedures implemented may not enable such businesses to ascertain the origins for these minerals or determine that these minerals are DRC conflict-free, which may harm the reputation of some of our businesses. Some of our businesses may also face difficulties in satisfying customers who may require that our products be certified as DRC conflict-free, which could harm relationships with such customers and lead to a loss of revenue. These new requirements also could have the effect of limiting the pool of suppliers from which some of our businesses source these minerals, and we may be unable to obtain conflict-free minerals at competitive prices, which could increase costs and adversely affect the manufacturing operations and profitability of certain of our businesses. Any one or a combination of these various factors could negatively impact our financial condition, business and results of operations.

The proposed spending cuts imposed by the Budget Control Act of 2011 (“BCA”) could impact the operating results and profit of our businesses.

The U.S. government continues to focus on developing and implementing spending, tax, and other initiatives to stimulate the economy, create jobs, and reduce the deficit. One of these initiatives, the BCA, imposes greater constraints on government spending. In an attempt to balance decisions regarding defense, homeland security, and other federal spending priorities, the BCA immediately imposed spending caps that contain approximately $487 billion in reductions to the Department of Defense (“DoD”) base budgets over a ten-year period ending in 2021. The BCA also provides for an automatic sequestration process, originally slated to commence in Januarywhich commenced March 1, 2013, that imposesimposed additional cuts of approximately $50$37 billion per year to the currentlyDoD base budget for fiscal 2013 and approximately $34 billion to the proposed DoD budgetsbase budget for each fiscal year beginning with 2013 and continuing through 2021. On January 2, 2013, the American Taxpayer Relief Act of 2012 (“ATRA”) was signed into law, which among other things effectively delayed the implementation of the automatic sequestration process by approximately two months and reduced the spending cuts that were scheduled to occur during 2013 in proportion to the delay.2014. Although we cannot predict whether the automatic sequestration process will be allowed to proceed as set forth, in ATRA and the BCA, or whether it will be further modified by new or additional legislation, a significant decline in overall U.S. government or DoD spending, a substantial reduction or elimination of particular defense-related programs or significant delays in contract or task order awards could have a material adverse effect on our businesses, result of operations and financial condition.

Risks Related to FOX

Growth in popularity of alternative recreational activities may reduce demand for mountain bikes and off road products which would reduce demand for FOX’s products.

Mountain biking and other off-road sports compete against numerous recreational activities for share of time and spend of enthusiasts. Any growth in popularity of other outdoor activities at the expense of mountain biking and off-road sports could lead to a decrease in demand for the company’s products and could materially adversely affect FOX’s financial condition, business and results of operations.

Risks Related to Advanced Circuits

Unless Advanced Circuits is able to respond to technological change at least as quickly as its competitors, its services could be rendered obsolete, which could materially adversely affect its financial condition, business and results of operations.

The market for Advanced Circuits’ services is characterized by rapidly changing technology and continuing process development. The future success of its business will depend in large part upon its ability to maintain and enhance its technological capabilities, retain qualified engineering and technical personnel, develop and market services that meet evolving customer needs and successfully anticipate and respond to technological changes on a cost-effective and timely basis. Advanced Circuits’ core manufacturing capabilities are for 2 to 12 layer printed circuit boards. Trends towards miniaturization and increased performance of electronic products are dictating the use of printed circuit boards with increased layer counts. If this trend continues Advanced Circuits may not be able to effectively respond to the technological requirements of the changing market. If it determines that new technologies and equipment are required to remain competitive, the development, acquisition and implementation of these technologies may require significant capital investments. It may be unable to obtain capital for these purposes in the future, and investments in new technologies may not result in commercially viable technological processes. Any failure to anticipate and adapt to its customers’ changing technological needs and requirements or retain qualified engineering and technical personnel could materially adversely affect its financial condition, business and results of operations.

Advanced Circuits’ customers operate in industries that experience rapid technological change resulting in short product life cycles and as a result, if the product life cycles of its customers slow materially, and research and development expenditures are reduced, its financial condition, business and results of operations will be materially adversely affected.

Advanced Circuits’ customers compete in markets that are characterized by rapidly changing technology, evolving industry standards and continuous improvement in products and services. These conditions frequently result in short product life cycles. As professionals operating in research and development departments represent the majority of Advanced Circuits’ net sales, the rapid development of electronic products is a key driver of Advanced Circuits’ sales and operating performance. Any decline in the development and introduction of new electronic products could slow the demand for Advanced Circuits’ services and could have a material adverse effect on its financial condition, business and results of operations.

Electronics manufacturing services corporations are increasingly acting as intermediaries, positioning themselves between PCB manufacturers and OEMS, which could reduce operating margins.

Advanced Circuits’ OEM customers are increasingly outsourcing the assembly of equipment to third party manufacturers. These third party manufacturers typically assemble products for multiple customers and often purchase circuit boards from Advanced Circuits in larger quantities than OEM manufacturers. The ability of Advanced Circuits to sell products to these customers at margins comparable to historical averages is uncertain. Any material erosion in margins could have a material adverse effect on Advanced Circuits’ financial condition, business and results of operations.

Risks Related to American Furniture Manufacturing

Competition from larger furniture manufacturers may adversely affect American Furniture Manufacturing’s business and operating results.

The residential upholstered furniture industry is highly competitive. Certain of American Furniture Manufacturing’s competitors are larger, have broader product lines and offer widely-advertised, well-known, branded products. If such larger competitors introduce additional products in the promotional segment of the upholstered furniture market, the segment in which American Furniture Manufacturing primarily participates, it may negatively impact American Furniture Manufacturing’s market share and financial performance.

The continuedrecent economic downturn has impacted AFM’s ability to meet the financial covenant requirements of its credit facility pursuant to which we are the lender. We are both the majority shareholder and lender to AFM and further deterioration in the business environment in which AFM operates could affect our relationship with AFM.

AFM’s results of operations are affected by many economic factors, including the level of economic activity in the markets in which AFM operates. The retail promotional furniture business has been impacted by a variety of factors relating to the recent economic downturn, including high unemployment, lack of consumer credit, increased fuel costs and the depressed housing market. To ensure on-going compliance with the financial covenants of AFM’s credit facility, we, in our capacity as the majority shareholder of AFM, contributed equity proceeds of approximately $3.5$1.6 million in 2012.2013. While we continue to be confident in AFM’s ability to execute on its business strategy, as described in Management’s Discussion and Analysis of Financial Condition and Results of Operations below, if unfavourable economic conditions continue to challenge the furniture industry we may seek strategic alternatives with respect to our investment in AFM.

Risks Related to Tridien

Certain of Tridien’s products are subject to regulation by the FDA.

Certain of Tridien’s mattress products are Class II devices within Section 201(h) of the Federal FDCA (21 USC §321(h), and, as such, are subject to the requirements of the FDCA and certain rules and regulations of the FDA. Prior to our acquisition of Tridien, one of its subsidiaries received a warning letter from the FDA in connection with certain deficiencies identified during a regular FDA audit, including noncompliance with certain design control requirements, certain of the good manufacturing practice regulations defined in 21 C.F.R. 820 and certain record keeping requirements. Tridien’s subsidiary has undertaken corrective measures to address the deficiencies and continues to fully cooperate with the FDA. Tridien is vulnerable to actions that may be taken by the FDA which have a material adverse effect on Tridien and/or its business. The FDA has the authority to inspect without notice, and to take any disciplinary action that it sees fit.

A change in Medicare Reimbursement Guidelines may reduce demand for Tridien’s products.

Certain changes in Medicare Reimbursement Guidelines may reduce demand for medical support surfaces and have a material effect on Tridien’s operating performance.

Two of Tridien’s largest customers represented approximately 59.4% of its gross sales in 2012.

Tridien has significant exposure to two key customers. The loss of either customer could negatively impact Tridien’s financial condition, business and results of operations.

Section 4191 of the Internal Revenue Code imposes a 2.3% excise tax on the sale of certain medical devices by the manufacturer or importer of the device beginning January 1, 2013.

If Tridien is unable to pass the tax on to its customers, such tax may have a material adverse effect on gross profit, operating income and CAD.

Risks Related to Fox

Growth in popularity of alternative recreational activities may reduce demand for mountain bikes and off road products which would reduce demand for Fox’s products.

Mountain biking and other off-road sports compete against numerous recreational activities for share of time and spend of enthusiasts. Any growth in popularity of other outdoor activities at the expense of mountain biking and off-road sports could lead to a decrease in demand for the company’s products and could materially adversely affect Fox’s financial condition, business and results of operations.

Risks Related to Arnold

Changes in the cost and availability of certain rare earth minerals and magnets could materially harm Arnold’s business, financial condition and results of operations.

Arnold manufactures precision magnetic assemblies and high-performance rare earth magnets including Samarium Cobalt magnets. Arnold is especially susceptible to changes in the price and availability of certain rare earth materials. The price of these materials has fluctuated significantly in recent years and we believe price fluctuations are likely to occur in the future. Arnold’s need to maintain a continuing supply of rare earth materials makes it difficult to resist price increases and surcharges imposed by its suppliers. Arnold’s ability to pass increases in costs for such materials through to its customers by increasing the selling prices of its products is an important factor in Arnold’s business. We cannot guarantee that Arnold will be able to maintain an appropriate differential at all times. If costs for rare earth materials increase, and if Arnold is unable to pass along, or is delayed in passing along, those increases to its customers, Arnold will experience reduced profitability. Rare earth minerals and magnets are available from a limited number of suppliers, primarily in China. Political and civil instability and unexpected adverse changes in laws or regulatory requirements, including with respect to export duties, quotas or embargoes, may affect the market price and availability of rare earth materials, particularly from China. If a substantial interruption should occur in the supply of rare earth materials, Arnold may not be able to obtain other sources of supply in a timely fashion, at a reasonable price or as would be necessary to satisfy its requirements. Accordingly, a change in the supply of, or price for, rare earth minerals and magnets could materially harm Arnold’s business, financial condition and results of operations

Risks Related to Tridien

Certain of Tridien’s products are subject to regulation by the FDA.

Certain of Tridien’s mattress products are Class II devices within Section 201(h) of the Federal FDCA (21 USC §321(h), and, as such, are subject to the requirements of the FDCA and certain rules and regulations of the FDA. Prior to our acquisition of Tridien, one of its subsidiaries received a warning letter from the FDA in connection with certain deficiencies identified during a regular FDA audit, including noncompliance with certain design control requirements, certain of the good manufacturing practice regulations defined in 21 C.F.R. 820 and certain record keeping requirements. Tridien’s subsidiary has undertaken corrective measures to address the deficiencies and continues to fully cooperate with the FDA. Tridien is vulnerable to actions that may be taken by the FDA which have a material adverse effect on Tridien and/or its business. The FDA has the authority to inspect without notice, and to take any disciplinary action that it sees fit.

A change in Medicare Reimbursement Guidelines may reduce demand for Tridien’s products.

Certain changes in Medicare Reimbursement Guidelines may reduce demand for medical support surfaces and have a material effect on Tridien’s operating performance.

Two of Tridien’s largest customers represented approximately 50% of its gross sales in 2013.

Tridien has significant exposure to two key customers. The loss of either customer could negatively impact Tridien’s financial condition, business and results of operations.

Section 4191 of the Internal Revenue Code imposes a 2.3% excise tax on the sale of certain medical devices (“MDET”) by the manufacturer or importer of the device beginning January 1, 2013.

The majority of Tridien’s customers either qualify for the retail exemption under the MDET or are considered the manufacturers of the product, with Tridien acting as the subcontractor, in which case Tridien’s customer is responsible for the MDET. If Tridien is unable to continue to pass the MDET on to its customers, such tax may have a material adverse effect on gross profit, operating income and cash flow.

ITEM 1B. UNRESOLVED STAFF COMMENTS

NONE

ITEM 2. – PROPERTIES

CamelBak

CamelBak’s headquarters is located in Petaluma, California where they lease approximately 33,000 square feet of office space and an additional 1,000 square feet of storage space. CamelBak also leases manufacturing and warehouse facilities in San Diego, California (124,000 square feet) and Tijuana, Mexico (53,000 square feet), and office space in Mareveles, Phillipines (10,000 square feet) and in Bassano, Italy (1,400 square feet).

Ergobaby

Ergobaby operates out of five offices. Its corporate headquarters is in Los Angeles, California where it leases 8,800 square feet. Ergobaby’s European headquarters is located in Hamburg, Germany where it leases approximately 2,411 square feet and a sales office in Paris, France. Ergobaby also leases 2,426 square feet of office space in Pukalani, Hawaii. Orbit Baby leases 41,400 square feet of office, manufacturing and warehouse space in Newark, California.

FOX

FOX leases its corporate headquarters which is located in a 51,000 square foot facility in Scotts Valley, California and leases the main manufacturing facility which is located in an 86,000 square foot facility in Watsonville, California. In addition, FOX leases three other smaller facilities totaling approximately 86,000 square feet in the surrounding Santa Cruz California area and approximately 9,300 feet of office space in Baxter, Minnesota. Internationally, FOX leases a 28,000 square foot sales and manufacturing facility in Taichung, Taiwan and approximately 10,000 square feet for a sales and service facility in Rodalben, Germany

Liberty Safe

Liberty Safe leases offices and warehouse facilities at two locations in Payson, Utah. The corporate headquarters and manufacturing facility are located in a 204,000 square foot building. Liberty leases two additional warehouse facilities totaling approximately 105,900 square feet.

Advanced Circuits

Advanced Circuits operations are located in an 113,000 square foot building in Aurora, Colorado, a 30,000 square foot building in Tempe, Arizona, and a 50,000 square foot building in Maple Grove, Minnesota. These facilities are leased and comprise both the factory and office space. The lease terms are for approximately 15 years with a renewal option at the Aurora, Colorado location for an additional 10 years.

American Furniture

American Furniture operates primarily from a manufacturing and warehousing facility located in Ecru, MS, of which approximately 750,000 square feet was refurbished in 2008 as a result of damage caused by a fire in 2008. This 1.1 million square foot facility includes 350,000 square feet of manufacturing space, 750,000 square feet of warehouse space and 82 shipping docks. AFM can add additional manufacturing lines within its existing footprint to accommodate demand during peak times. In addition to AFM’s primary manufacturing facility, AFM owns or leases approximately 250,000 square feet of warehouse and small manufacturing space within the vicinity of its primary Ecru facility. AFM also leases approximately 12,00019,000 square feet of showroom space in High Point, North Carolina, and Las Vegas Nevada allowing it to showcase its products to buyers during trade shows held in the area.those cities.

Arnold

Arnold is headquartered in Rochester, New York and has nine manufacturing facilities. The summary below outlines Arnold’s property locations. Arnold owns the Ogallala, NE location and the others are leased.

CamelBak

CamelBak’s headquarters is located in Petaluma, California where they lease approximately 33,000 square feet of office space and an additional 1,000 square feet of storage space. CamelBak also leases manufacturing and warehouse facilities in San Diego, California (124,000 square feet) and Tijuana, Mexico (53,000 square feet), and office space in Mareveles, Phillipines (6,500 square feet) and in Bassano, Italy (1,400 square feet).

Ergobaby

Ergobaby operates out of five offices. Its corporate headquarters is in Los Angeles, California where it leases 8,800 square feet. Ergobaby’s European headquarters is located in Hamburg, Germany where it leases approximately 2,411 square feet and a sales office in Paris, France. Ergobaby also leases 2,426 square feet of office space in Pukalani, Hawaii. Orbit Baby leases 41,400 square feet of office, manufacturing and warehouse space in Newark, California.

Fox

Fox leases its corporate headquarters which is located in a 51,000 square foot facility in Scotts Valley, California and leases the main manufacturing facility which is located in an 86,000 square foot facility in Watsonville, California. In addition, Fox leases three other smaller facilities totaling approximately 83,500 square feet in the surrounding Santa Cruz California area.

Liberty Safe

Liberty Safe leases offices and warehouse facilities at two locations in Payson, Utah. The corporate headquarters and manufacturing facility are located in a 204,000 square foot building. Liberty leases an additional warehouse facility totaling approximately 7,200 square feet.

Tridien

Tridien leases a 33,000 square foot facility in Coral Springs, Florida, which houses its manufacturing and distribution operations for the east coast and an 81,000 square foot facility in Corona, California, which houses the manufacturing and distribution facilities for the west coast. Tridien also leases a 60,000105,000 square foot manufacturing facility and warehouse facility in Fishers, Indiana.

Our corporate offices are located in Westport, Connecticut, where we lease approximately 1,500 square feet from our Manager.

We believe that our properties and the terms of their leases at each of our businesses are sufficient to meet our present needs and we do not anticipate any difficulty in securing additional space, as needed, on acceptable terms.

ITEM 3. – LEGAL PROCEEDINGS

In the normal course of business, we are involved in various claims and legal proceedings. While the ultimate resolution of these matters has yet to be determined, we do not believe that their outcome will have a material adverse effect on our financial position or results of operations.

ITEM 4. – MINE SAFETY DISCLOSURES

Not Applicable.

Part II

Item 5. – Market for Registrants’ Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information

Our Trust stock tradeshas traded on the New York Stock Exchange (the “NYSE”) under the symbol “CODI” since November 1, 2011. Previously, our stock was traded on the NASDAQ Global Select Market under the symbol “CODI.” The following table sets forth the high and low sales prices per share as reported on the NASDAQ Global Select Market until November 1, 2011, at which time our shares began trading on the NYSE, and thereafter on the NYSE. The highest and lowest sales prices per share of Trust stock were $11.00$12.12 and $18.16,$19.64, respectively, for the periods presented below: