UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM10-K

(Mark One)

For the fiscal year ended August 31, 20172018

or

For the transition period from    to    to

Commission file number001-14063

JABIL INC.

(Exact name of registrant as specified in its charter)

10560 Dr. Martin Luther King, Jr. Street North, St. Petersburg, Florida 33716

(Address of principal executive offices) (Zip Code)

(727) 577-9749

Registrant’s telephone number, including area code

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ☒    No  ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ☐    No  ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of RegulationS-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ☒    No  ☐

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of RegulationS-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form10-K or any amendment to this Form10-K.  ☒

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, anon-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule12b-2 of the Act).    Yes  ☐    No  ☒

The aggregate market value of the voting common stock held bynon-affiliates of the registrant based on the closing sale price of the Common Stock as reported on the New York Stock Exchange on February 28, 20172018 was approximately $4.5$4.0 billion. For purposes of this determination, shares of Common Stock held by each officer and director and by each person who owns 10% or more of the outstanding Common Stock have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes. The number of outstanding shares of the registrant’s Common Stock as of the close of business on October 10, 2017,9, 2018, was 176,643,101.161,878,931. The registrant does not have anynon-voting stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

The registrant’s definitive Proxy Statement for the 2017 Annual Meeting of Stockholders scheduled to be held on January 25, 201824, 2019 is incorporated by reference in Part III of this Annual Report on Form10-K to the extent stated herein.

JABIL INC. AND SUBSIDIARIES

20172018 FORM10-K ANNUAL REPORT

TABLE OF CONTENTS

References in this report to “the Company,” “Jabil,” “we,” “our,” or “us” mean Jabil Inc. together with its subsidiaries, except where the context otherwise requires. This Annual Report onForm 10-K contains certain statements that are, or may be deemed to be, forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”) and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). These forward-looking statements (such as when we describe what “will,” “may,” or “should” occur, what we “plan,” “intend,” “estimate,” “believe,” “expect” or “anticipate” will occur, and other similar statements) include, but are not limited to, statements regarding future sales and operating results, potential risks pertaining to these future sales and operating results, future prospects, anticipated benefits of proposed (or future) acquisitions, dispositions and new facilities, growth, the capabilities and capacities of business operations, any financial or other guidance, expected capital expenditures and dividends, expected restructuring charges and related savings and all statements that are not based on historical fact, but rather reflect our current expectations concerning future results and events. We make certain assumptions when making forward-looking statements, any of which could prove inaccurate, including assumptions about our future operating results and business plans. Therefore, we can give no assurance that the results implied by these forward-looking statements will be realized. Furthermore, the inclusion of forward-looking information should not be regarded as a representation by the Company or any other person that future events, plans or expectations contemplated by the Company will be achieved. The following important factors, among others, could affect future results and events, causing those results and events to differ materially from those expressed or implied in our forward-looking statements:

For a further list and description of various risks, factors and uncertainties that could cause future results or events to differ materially from those expressed or implied in our forward-looking statements, see the “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” sections contained in this document, and any subsequent reports on Form10-Q and Form8-K, and other filings we make with the Securities and Exchange Commission (“SEC”). Given these risks and uncertainties, the reader should not place undue reliance on these forward-looking statements.

All forward-looking statements included in this Annual Report onForm 10-K are made only as of the date of this Annual Report onForm 10-K, and we do not undertake any obligation to publicly update or correct any forward-looking statements to reflect events or circumstances that subsequently occur, or of which we hereafter become aware. You should read this document completely and with the understanding that our actual future results or events may be materially different from what we expect. All forward-looking statements attributable to us are expressly qualified by these cautionary statements.

PART I

Item 1. Business

The Company

We are one of the leading providers of worldwide manufacturing services and solutions. We provide comprehensive electronics design, production and product management services to companies in the automotivevarious industries and transportation, capital equipment, consumer lifestyles and wearable technologies, computing and storage, defense and aerospace, digital home, healthcare, industrial and energy, mobility, networking and telecommunications, packaging, point of sale and printing industries.end markets. Our services enable our customers to reduce manufacturing costs, improve supply-chain management, reduce inventory obsolescence, lower transportation costs and reduce product fulfillment time. Our manufacturing and supply chain management services and solutions include innovation, design, planning, fabrication and assembly, delivery and managing the flow of resources and products.

We serve our customers primarily through dedicated business units that combine highly automated, continuous flow manufacturing with advanced electronic design and design for manufacturability. We depend, and expect to continue to depend, upon a relatively small number of customers for a significant percentage of our net revenue, which in turn depends upon their growth, viability and financial stability. Based on net revenue, for the fiscal year ended August 31, 2017,2018, our largest customers include Apple, Inc., Cisco Systems, Inc., GoPro, Inc., Hewlett-Packard Company, Ingenico S.A.,Keysight Technologies, LM Ericsson Telephone Company, NetApp, Inc., Nokia Networks, SolarEdge Technologies Inc., Valeo S.A. and Zebra Technologies Corporation. For the fiscal year ended August 31, 2017,2018, we had net revenues of $19.1$22.1 billion and net income attributable to Jabil Inc. of $129.1$86.3 million.

We conduct our operations in facilities that are located worldwide, including but not limited to, China, Hungary, Malaysia, Mexico, Singapore and the United States. We derived a substantial majority, 91.4%91.7%, of net revenue from our international operations for the fiscal year ended August 31, 2017.2018. Our global manufacturing production sites allow customers to manufacture products simultaneously in the optimal locations for their products. Our global presence is key to assessing and executing on our business opportunities.

We have two reporting segments: Electronics Manufacturing Services (“EMS”) and Diversified Manufacturing Services (“DMS”), which are organized based on the economic profiles of the services performed, including manufacturing capabilities, market strategy, margins, return on capital and risk profiles. Our EMS segment is focused around leveraging IT, supply chain design and engineering, technologies largely centered on core electronics, utilizing our large scalelarge-scale manufacturing infrastructure and our ability to serve a broad range of end markets. Our EMS segment is typically a lower-margin but high volumehigh-volume business that produces productproducts at a quicker rate (i.e. cycle time) and in larger quantities and includes customers primarily in the automotive and transportation, capital equipment, computing and storage, defense and aerospace, digital home, industrial and energy, networking and telecommunications, point of sale and printing industries. Our DMS segment is focused on providing engineering solutions, with an emphasis on material sciences and technologies. Our DMS segment is typically a higher-margin business and includes customers primarily in the consumer lifestyles and wearable technologies, defense and aerospace,wearables, healthcare, mobility and packaging industries.

The following table sets forth, for the periods indicated, revenue by segment expressed as a percentage of net revenue:

Additional financial information regarding our reportable operating segments is included in Item 7 of this report and Note 1312 – “Concentration of Risk and Segment Data” to the Consolidated Financial Statements.

Our principal executive offices are located at 10560 Dr. Martin Luther King, Jr. Street North, St. Petersburg, Florida 33716, and our telephone number is (727) 577-9749. We were incorporated in Delaware in 1992. Our website is located at http://www.jabil.com. Through a link on the “Investors” section of our website, we make available our Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q, our Current Reports on Form 8-K and any amendments to those reports, free of charge, as soon as reasonably practicable after they are electronically filed with, or furnished to, the SEC. The “Investors” section of our website contains a significant amount of information about our company, including financial and other information for investors. The information that we post on the “Investors” section of our website could be deemed to be material information. We encourage investors, the media and others interested in Jabil to visit our website. Information on our website, however, is not a part of this report.

Industry Background

The industry in which we operate has historically been composed of companies that provide a range of design and manufacturing services to companies that utilize electronics components in their products.

We monitor the current economic environment and its potential impact on both the customers we serve as well as our end-marketsend markets and closely manage our costs and capital resources so that we can respond appropriately as circumstances change. Over the long term we believe the factors driving our customers and potential customers to use our industry’s services include:

Our Strategy

We are focused on expanding our position as one ofOur vision for the leading providers of worldwidefuture is to become the world’s most technologically advanced manufacturing services and solutions. Tosolutions provider. As we work to achieve this objective,our vision, we continue to pursue the following strategies:

Our Approach to Manufacturing

In order toTo achieve high levels of manufacturing performance, we have adopted the following approaches:

Our Design Services

We offer a wide spectrum ofvalue-add design services to enhance our relationships with current customers and to help develop relationships with our new customers. Our teams are strategically staffed to support Jabil customers for all development projects, including turnkey system design and design for manufacturing activities. These design services include:

•

Computer-Assisted Design. Our Computer-Assisted Design (“CAD”) team provides PCBA design services using advanced CAD engineering tools, PCBA design validation and verification services, and other consulting services, which include generating a bill of materials, approved vendor list and assembly equipment configuration for a particular PCBA design. We believe that our CAD services result in PCBA designs that are optimized for manufacturability and cost efficiencies and accelerate a product’stime-to-market andtime-to-volume production.

Fabrication and Assembly

We offer systems assembly, test, direct-order fulfillment andconfigure-to-order services to our customers. Our systems assembly services extend our range of assembly activities to include assembly of higher-levelsub-systems and systems incorporating multiple PCBAs. In addition, based on quality assurance programs developed with our customers, we provide testing services for our PCBAs,sub-systems and systems products. Our quality assurance programs include circuit testing under various environmental conditions to ensure that our products meet or exceed required customer specifications. We also offer direct-order fulfillment andconfigure-to-order services for delivery of final products.

Technology and Research and Development

We believe that our manufacturing and testing technologies are among the most advanced in our industry. To meet our customers’ increasingly sophisticated needs, we continuously engage in R&D activities designed to create new and improved products and manufacturing solutions for our customers. Through our R&D efforts, we intend to continue to offer our customers highly automated, continuous flow manufacturing process technologies for precise and aesthetic mechanical components and system assembly. These technologies include automation, electronicand R&D activities include:

Research and Development

We engage in R&D activities includefor many products including mobile internet devices and associated accessories, multi-media tablets,two-way radios, consumer lifestyles products, health care and life science products, server and storage products,set-top and digital home products and printing products and wearable technologies products. For fiscal years 2017, 2016 and 2015, weThe following table sets forth, for the periods indicated, the amount expended $29.7 million, $32.0 million and $27.6 million, respectively, on R&D activities.activities:

Customers and Marketing

Our coreA key tenet of our strategy is to establish and maintain long-term relationships with leading companies in expanding industries with the size and growth characteristics that can benefit from highly automated, continuous flow manufacturing on a global scale. A small number of customers and significant industry sectors have historically comprised a major portion of our net revenue. We also market our services and solutions through our website and our Blue Sky Innovation Centers.

In fiscal year 2017,2018, our five largest customers accounted for approximately 47%48% of our net revenue and 8380 customers accounted for approximately 90% of our net revenue. The table below sets forth the respective portion of net revenue attributable to the customers that accounted for approximately 10% or more of our net revenue during the fiscal years ended August 31, 2018, 2017 2016 and 2015:2016:

Our business unit managers and directors, supported by executive management, work to expand existing customer relationships through the addition of product lines and services. These individuals also identify and attempt to develop relationships with new customers who meet our targeted customer profile. We also market our services and solutions through our website and our Blue Sky Innovation Centers.

Competition

Our business is highly competitive. We compete against numerous domestic and foreign electronic manufacturing service providers and design providers, including Benchmark Electronics, Inc., Celestica Inc., Flextronics InternationalFlex Ltd.,Hon-Hai Precision Industry Co., Ltd., Plexus Corp. and Sanmina Corporation. We also compete against numerous domestic and foreign diversified manufacturing service providers, including AptarGroup, Inc., Berry Plastics Group, Inc., Catcher Technology Co., Ltd., Gerresheimer AG, Quanta Computer, Inc. and Zeniya Aluminum Engineering, Ltd. In addition, past consolidation in our industry has resulted in larger and more geographically diverse competitors that have significant resources.

We also face competition from the manufacturing operations of our current and potential customers, who are continually evaluating the merits of manufacturing products internally against the advantages of outsourcing. In the past, some of our customers moved a portion of their manufacturing from us in order to more fully utilize their excess internal manufacturing capacity.

Backlog

Our order backlog as of August 31, 20172018 and 20162017 was valued at approximately $4.9$6.8 billion and $4.5$4.9 billion, respectively. Our order backlog is expected to be filled within the current fiscal year. Although our backlog consists of firm purchase orders, the level of backlog at any particular time may not be necessarily indicative of future sales. Given the nature of our relationships with our customers, and the fact that we generally do not enter into long-term contracts or purchase commitments with our customers, we frequently allow our customers to cancel or reschedule deliveries, and therefore, backlog is often not a meaningful indicator of future financial results.

Seasonality

Production levels for a portion of the DMS segment are subject to seasonal influences. We may realizeHistorically, we have realized greater net revenue during our first fiscal quarter, which ends on November 30, due to higher demand for consumer-related products during the holiday selling season.

Components Procurement

We procure components from a broad group of suppliers, determined on anassembly-by-assembly basis. Almost allSome of the products we manufacture contain one or more components that are only available from only a single source. Some of these components are allocated from time to time in response to supply shortages. In some cases, supply shortages will substantially curtail production of all assemblies using a particular component.

Proprietary Rights

We regard certain aspects of our design, production and product management services as proprietary intellectual property. To protect our trade secrets, manufacturingknow-how and other proprietary rights, we rely largely upon a combination of intellectual property laws,non-disclosure agreements with our customers, employees, and suppliers and our internal security systems, policies and procedures. We have not historically sought patent protection for many of our proprietary processes, designs or other patentable intellectual property. We currently have a relatively modest number of solely owned and/or jointly held patents for various innovations. We believe that our research and design activities, along with developments relating thereto, may result in growth of our patent portfolio and its importance to us, particularly as we expand our business activities. Other factors significant to our proprietary rights include the knowledge and experience of our management and personnel and our ability to develop, enhance and market manufacturing services.

We license some technology and intellectual property rights from third parties that we use in providing some of our design, production and product management services to our customers. Generally, the license agreements that govern such third partythird-party technology and intellectual property rights grant us the right to use the subject technology anywhere in the world and terminate upon a material breach by us.

Employees

As of August 31, 2017,2018, we employed approximately 170,000199,000 people worldwide. None of our U.S. domestic employees are represented by a labor union. In certain international locations, our employees are represented by labor unions and by works councils. We have never experienced a significant work stoppage or strike and we believe that our employee relations are good.

Geographic Information

The information regarding net revenue and long-lived assets set forth in Note 1312 – “Concentration of Risk and Segment Data” to the Consolidated Financial Statements is hereby incorporated by reference into this Part I, Item 1. Each of our segments is dependent on foreign operations.

Environmental

We are subject to a variety of federal, state, local and foreign environmental, health and safety, product stewardship and producer responsibility laws and regulations, including those relating to the use, storage, discharge and disposal of hazardous chemicals used during our manufacturing process, those governing worker health and safety, those requiring design changes, supply chain investigation or conformity assessments or those relating to the recycling or reuse of products we manufacture.

Executive Officers of the Registrant

Executive officers are appointed by the Board of Directors and serve at the discretion of the Board. Except as otherwise noted below, each executive officer is a full-time employee of Jabil. There are no family relationships among our executive officers and directors. There are no arrangements or understandings between any of our executive officers and any other persons pursuant to which any of such executive officers were selected. Below is a list of our executive officers as of the most recent practicable date.

Forbes I.J. Alexander (age 57) was named Chief Financial Officer in September 2004. Mr. Alexander joined Jabil in 1993 as Controller of Jabil’s Scottish operation and was promoted to Assistant Treasurer in April 1996. Mr. Alexander was Treasurer from November 1996 to August 2004. Prior to joining Jabil, Mr. Alexander was Financial Controller of Tandy Electronics European Manufacturing Operations in Scotland. Mr. Alexander is a Fellow of the Institute of Chartered Management Accountants. He holds a B.A. in Accounting from the University of Abertay, Dundee, Scotland.officers:

Steven D. Borges (age 49)50) was named Executive Vice President, Chief Executive Officer, Healthcare in September 2016. Mr. Borges joined Jabil in 1993 and has global experience in positions of increasing responsibility in Operations, Business Development, Manufacturing Operations and Supply Chain Management. He holds a Bachelor’s Degree in Business Administration and Management from Fitchburg State University.

Sergio A. Cadavid (age 61)62) was named Senior Vice President, Treasurer in September 2013. Mr. Cadavid joined Jabil in 2006 as Treasurer. Prior to joining Jabil, Mr. Cadavid was Corporate Assistant Treasurer for Owens-Illinois, Inc. in Toledo, Ohio. He has also held various positions with The Quaker Oats Company, Arthur Andersen & Co. and J.M. Family Enterprises, Inc. He holds an M.B.A. from the University of Florida and a B.B.A. from Florida International University.

Michael DastoorBrenda Chamulak  (age 51)(age 47) was named Senior Vice President, ControllerChief Executive Officer, Jabil Packaging Solutions in July 2010.2018. Prior to joining Jabil, Ms. Chamulak was Vice President and General Manager of the Personal Care & Home Care, a business unit of Aptar Inc., a global supplier of dispensing and sealing solutions based in Crystal Lake, Illinois. Ms. Chamuluk served as the President, Global Market Development for Aptar’s Beauty + Home, Personal Care Business Unit from 2016 to 2017 and served as the General Manager, Aptar Midland from 2013 to 2016. She joined Aptar in 1992 and held positions of increasing responsibility with Aptar. Ms. Chamulak has a B.A. in Marketing and International Business from Carthage College and an MBA from Marquette University.

Michael Dastoor (age 52) was named Executive Vice President, Chief Financial Officer effective September 2018. Mr. Dastoor joined Jabil in 2000 as Regional Controller – Asia Pacific and was named Controller in June 2004.2004 and Senior Vice President, Controller in July 2010. Prior to joining Jabil, Mr. Dastoor was a Regional Financial Controller for Inchcape PLC. He holds a degree in Finance and Accounting from the University of Bombay. Mr. Dastoor is a Chartered Accountant from the Institute of Chartered Accountants in England and Wales.

Erich Hoch (age 48) was named Executive Vice President, Chief Executive Officer, Jabil Digital Solutions in June 2016. Mr. Hoch joined Jabil in 2002 as Business Unit Manager and held positions of increasing responsibility in Operations, Business Development, Manufacturing Operations, Technology and Supply Chain where he served as Senior Vice President and Chief Supply Chain Officer from 2008 to 2013. He previously served as Executive Vice President of Engineering and Technology Services. Prior to Jabil, Mr. Hoch spent 18 years at Philips Electronics where he worked across multiple functional disciplines. Mr. Hoch received an engineering diploma in Vienna, Austria, in toolmaking and mechanics. He also holds various international certifications in Marketing, Purchasing, and Business Management.

Bruce A. Johnson(age 61) (age 62) was named Senior Vice President, Chief Human Resources Officer in January 2017. Mr. Johnson joined Jabil in 2015 as Vice President, Human Resources. Prior to joining Jabil, Mr. Johnson was a Chief Organizational Effectiveness Officer/Executive Vice President, Human Resources for C&S Wholesale Grocers, Inc., a wholesale distributor of food and grocery items with headquarters in Keene, New Hampshire from 2007 to 2014. Mr. Johnson also served in senior roles at The Timberland Company, a footwear and apparel designer, retailer and manufacturer in New Hampshire, and E.I. Du Pont De Nemours and Company (Du Pont) in Delaware. He holds a Bachelor of Arts in History from Middlebury College in Vermont.

Robert L. Katz (age 55)56) joined Jabil in March 2016 and was named Executive Vice President, General Counsel and Corporate Secretary in September 2016. Mr. Katz transitioned the Corporate Secretary role to a member of his staff in April 2017. Prior to joining Jabil, Mr. Katz served as Executive Vice President, General Counsel and Secretary of SharkNinja, a vacuum and kitchen appliance manufacturer. He was previously Senior Vice President and General Counsel of Ingersoll Rand plc, a diversified industrial manufacturer, from 2010 to 2015. Mr. Katz served as Senior Vice President, General Counsel, Corporate Secretary and Chief Compliance Officer of Federal-Mogul Corporation from 2007 to 2010. From 1999 to 2007 he was General Counsel—EMEA for Delphi Corporation in Paris, France. He began his career with Milbank, Tweed, Hadley & McCloy working in the Mergers and Acquisitions and General Corporate Group in New York and London. He earned a Bachelor of Laws (LL.B.) and a Bachelor of Civil Law (B.C.L.) from McGill University. He is a member of the New York Bar.

Michael J. Loparco (age 46)47) was named Executive Vice President, Chief Executive Officer, Engineered Solutions Group in January 2016. Previously, Mr. Loparco served as Executive Vice President, Chief Executive Officer, Industrial and Energy, Senior Vice President, Global Business Units in Jabil’s High Velocity business and held a variety of global management positions. Before joining Jabil in 1999, Mr. Loparco was an attorney at Holland & Knight, LLP, practicing corporate and commercial litigation. He holds a Juris Doctorate from Stetson University College of Law. He holds a Bachelor of Arts in International Business, with minor degrees in Spanish and Business Management, from Eckerd College.

Mark Mondello (age 53)54) was named Chief Executive Officer in March 2013. Mr. Mondello joined Jabil in 1992 as a manufacturing supervisor. Mr. Mondello was promoted to Project Manager in 1993, named Vice President, Business Development in 1997, Senior Vice President, Business Development in 1999 and served as Chief Operating Officer from 2002 to 2013. Prior to joining Jabil, Mr. Mondello was a commercial and defense-related aerospace project manager for Moog, Inc. He holds a B.S. in Mechanical Engineering from the University of South Florida.

William D. Muir, Jr. (age 49) was named Chief Operating Officer in March 2013. As previously announced, Mr. Muir will be retiring effective December 31, 2017 and is currently transitioning his responsibilities. Mr. Muir joined Jabil in 1992 as a Quality Engineer and has served in a variety of management positions of increasing responsibility. Mr. Muir served as Executive Vice President, Chief Executive Officer, Global Manufacturing Services Group from 2010 to 2013 prior to being named Chief Operating Officer. He holds a Bachelor’s degree in Industrial Engineering and an MBA, both from the University of Florida.

Alessandro Parimbelli (age 49)50) was named Executive Vice President, Chief Executive Officer, Enterprise and Infrastructure in July 2013. Mr. Parimbelli joined Jabil in 1998 as a Test Engineering Manager. At Jabil, Mr. Parimbelli served in business management positions in Boise, Idaho and Paris, France before being promoted to Vice President, Global Business Units in 2006. From 2010 through 2012, Mr. Parimbelli was Senior Vice President, Global Business Units and was responsible for Jabil’s Enterprise and Infrastructure business. Prior to joining Jabil, Mr. Parimbelli held various engineering positions within Hewlett-Packard and other software engineering companies. He holds an MBA from Colorado State University and a Software Engineering degree from Politecnico of Milan, Italy.

William E. Peters(age 54) (age 55) was named President in March 2013. Mr. Peters served as Executive Vice President, Human Development, Human Resources from 2010 to 2013. He joined Jabil in 1990 as a buyer and has held positions of increasing responsibility in Operations, Supply Chain and Manufacturing Operations. Prior to joining Jabil, Mr. Peters was a financial analyst for Electronic Data Systems. He holds a B.A. in Economics from Michigan State University.

Courtney J. Ryan(age 47) (age 48) was named Executive Vice President, Corporate Development/Chief of Staff in July 2016. Mr. Ryan joined Jabil in 1993 as a Quality Engineer and worked his way through various operations and business development management positions. He was named Senior Vice President, Global Business Units in 2007. Mr. Ryan served as Executive Vice President, Chief Executive Officer, Nypro from July 2013 to June 2016. Mr. Ryan holds an MBA with a concentration in Decision and Information Science and a Bachelor of Arts in Economics, both from the University of Florida. He also serves on the University of Florida’s MBA and Supply Chain Advisory Board.

Daryn Smith (age 48) was named Senior Vice President, Enterprise & Commercial Controller effective September 2018. Mr. Smith served as Chief Financial Officer of EMS from June 2013—June 2018. Mr. Smith joined Jabil in 2002 and he has held various leadership roles in Risk and Assurance, Financial Planning and Analysis, and Controllership for Jabil. Prior to joining Jabil, Mr. Smith was with the Assurance and Advisory Services practice for Arthur Andersen (Andersen). He holds a Bachelor’s degree in Accounting from the University of South Florida and an MBA from the University of Florida.

Kenneth S. Wilson (age 53) was named Executive Vice President and CEO of Jabil Green Point in 2017. Prior to that, Mr. Wilson was Senior Vice President of the Telecommunications Infrastructure Sector within Jabil’s Enterprise & Infrastructure group. He first joined Jabil in 2000 as a business unit manager; and has held various leadership roles, including VP of Global Business Units, running businesses such as consumer electronics and telecommunications. Prior to Jabil, he spent 8 years at Motorola, where he served as Operations Director in their Handset Division. Kenny has a Bachelor’s degree in Manufacturing Engineering and a MBA from Edinburgh Business School.

Additional Information

Our principal executive offices are located at 10560 Dr. Martin Luther King, Jr. Street North, St. Petersburg, Florida 33716, and our telephone number is(727) 577-9749. We were incorporated in Delaware in 1992. Our website is located at http://www.jabil.com. Through a link on the “Investors” section of our website, we make available our Annual Report on Form10-K, our Quarterly Reports on Form10-Q, our Current Reports on Form8-K and any amendments to those reports, free of charge, as soon as reasonably practicable after they are electronically filed with, or furnished to, the SEC. The “Investors” section of our website contains a significant amount of information about our Company, including financial and other information for investors. The information that we post on the “Investors” section of our website could be deemed to be material information. We encourage investors, the media and others interested in Jabil to visit our website. Information on our website, however, is not a part of this report.

Item 1A.Risk1A. Risk Factors

Our operating results may fluctuate due to a number of factors, many of which are beyond our control.

Our annual and quarterly operating results are affected by a number of factors, including:

Because we depend on a limited number of customers, a reduction in sales to any one of those customers could cause a significant decline in our revenue.

We currently depend, and expect to continue to depend for the foreseeable future, upon a relatively small number of customers for a significant percentage of our net revenue and upon their growth, viability and financial stability. See “Business – The Company.” In some instances, particular manufacturing services we provide for a customer representsrepresent a significant portion of the overall revenue we receive from that customer. These circumstancesAs a result of this concentration, a reduction in business from one or more of our largest customers could each have a material adverse effect on our results of operations. In addition, if one or more of our significant customers were to become insolvent or otherwise become unable to pay us on a timely basis, or at all, our operating results and financial condition could be adversely affected.

Consolidation among our customers exposes us to increased risks, including reduced revenue and dependence on a smaller number of customers. Increasing consolidation in industries that utilize our services may occur as companies combine to achieve further economies of scale and other synergies, which could result in an increase in excess manufacturing capacity as companies seek to divest manufacturing operations or eliminate duplicative product lines. Excess manufacturing capacity may increase pricing and competitive pressures for our industry as a whole and for us in particular. If one of our customers is acquired by another company that does not rely on us to provide services and has its own production facilities or relies on another provider of similar services, we may lose that customer’s business. Such consolidation among our customers may further reduce the number of customers that generate a significant percentage of our net revenue and expose us to increased risks relating to dependence on a small number of customers.

Our customers face numerous competitive challenges, which may materially adversely affect their business and ours.

Factors adversely affecting our customers may also adversely affect us. These factors include:

If our customers are unsuccessful in addressing these competitive challenges, their businesses may be materially adversely affected, reducing the demand for our services, decreasesdecreasing our revenues or altering our production cycles and inventory management, each of which could adversely affect our ability to cover fixed costs and our gross profit margins and results of operations.

Most of our customers do not commit to long-term production schedules, and they may cancel their orders, change production quantities, delay production or change their sourcing strategy, which makes it difficult for us to schedule production and manage capital expenditures and to maximize the efficiency of our manufacturing capacity.

Most of our customers do not commit to firm production schedules for more than one quarter. We make significant decisions, including determining the levels of business that we will seek and accept, production schedules, component procurement commitments, personnel needs and other resource requirements, based on our estimate of customer requirements. Our inability to forecast the level of customer orders with certainty makes it difficult to schedule production and maximize utilization of our manufacturing capacity. In the past, we have been required to increase staffing and other expenses in order to meet the anticipated demand. On occasion, customers may require rapid increases in production for one or more of their products or request that we relocate our manufacturing operations or transfer manufacturing from one facility to another, which can stress our resources and reduce operating margins.

Customers have canceled their orders, changed production quantities, delayed production, changed their sourcing strategy and terminated their relationships with us. We cannot assure you that present or future customers will not terminate their service arrangements with us or significantly change, reduce or delay the amount of services ordered. Such changes, delays and cancellations have led to, and may lead in the future to a decline in our production and our possession of excess or obsolete inventory that we may not be able to sell to customers or third parties. This may result in write downs of inventories, a

reduction in the number of products that we sell, delays in payment for inventory that we purchased, and reductions in the use of our manufacturing facilities. As many of our costs and operating expenses are relatively fixed, a reduction in customer demand, particularly a reduction in demand for a product that represents a significant amount of our revenue, can harm our gross profit margins and results of operations.

In addition, we sometimes experience difficulty forecasting the timing of our receipt of revenue and earnings from customers. The necessary process to begin manufacturing can be lengthy. Because we make capital expenditures during thisramping-up process and do not receive revenue until after we produce and ship the customer’s products, any delays or unanticipated costs in theramping-up process may have a significant adverse effect on our cash flows and our results of operationsoperations. Servicing our largest customers may also require us to increase our capital expenditures.

Customer relationships with emerging companies may present more risks than with established companies.

Customer relationships with emerging companies present special risks because we do not have an extensive product or customer relationship history. There is less demonstration of market acceptance of their products making it harder for us to anticipate requirements than with established customers. Our credit risk on these customers, especially in trade accounts receivable and inventories, and the risk that these customers will be unable to fulfill indemnification obligations to us are potentially increased. We sometimes offer these customers extended payment terms, loans and other support and financial accommodations which may increase our financial exposure.

Exposure to financially troubled customers or suppliers may adversely affect our financial results.

We provide manufacturing services to companies and industries that have in the past, and may in the future, experience financial difficulty. If our customers experience financial difficulty, we could have difficulty recovering amounts owed to us from these customers, or demand for our products from these customers could decline. Additionally, if our suppliers experience financial difficulty, we could have difficulty sourcing supplies necessary to fulfill production requirements. If one or more of our customers were to become insolvent or otherwise were unable to pay for the services provided by us on a timely basis, or at all, our operating results and financial condition could be adversely affected. Such adverse effects could include one or more of the following: an increase in our provision for doubtful accounts, a charge for inventory writeoffs, a reduction in revenue, and an increase in our working capital requirements due to higher inventory levels and increases in days our accounts receivable are outstanding. In addition, because we securitize certain of our accounts receivable, our securitization programs could be negatively affected by customer financial difficulty affecting the recovery of a significant amount of receivables.

The success of our business is dependent on our ability to keep pace with technological changes and competitive conditions in our industry, and our ability to effectively adapt our services as our customers react to technological changes and competitive conditions in their respective industries.

If we are unable to offer technologically advanced, cost effective, quick response manufacturing services that are differentiated from our competition and adapt those services as our customers’ requirements change, demand for our services will decline.

Introducing new business models or programs requiring implementation of new competencies, such as new process technologies and our development of new products or services for customers, could affect our operations and financial results.

The introduction of new business models or programs requiring implementation or development of new competencies, such as new process technology within our operations and our independent development of new products or services for customers, presents challenges in addition to opportunities. The success of new business models or programs depends on a number of factors including, but not limited to, a sufficient understanding of the new business or markets, timely and successful product development (by us and/or our customer), market acceptance, our ability to manage the risks associated with new product productionramp-up, the effective management of purchase commitments and inventory levels in line with anticipated product demand, our development or acquisition of appropriate intellectual property, the availability of supplies in adequate quantities and at appropriate costs to meet anticipated demand, and the risk that new products may have quality or other defects in the early stages of introduction. Accordingly, we cannot determine in advance the ultimate result of new business models or programs.

As a result, we must make long-term investments, develop or obtain appropriate intellectual property and commit significant resources before knowing whether our assumptions will accurately reflect customer demand for our services. After the development of a new business model or program, we must be able to manufacture appropriate volumes quickly and at low cost. To accomplish this, we endeavor to accurately forecast volumes, mixes of products and configurations that meet customer requirements; however, we may not succeed at doing so.

We compete with numerous other diversified manufacturing service providers, electronic manufacturing services and design providers and others.

Our business is highly competitive and our manufacturing processes are generally not subject to significant proprietary protection. We compete against numerous domestic and foreign electronic manufacturers, manufacturing service providers and design providers. Past consolidation in our industry has resulted in larger and more geographically diverse competitors who have significant combined resources. The significant purchasing power and market power of these large companies could increase pricing and competitive pressures for us. Most of our competitors have international operations and significant financial resources and some have substantially greater manufacturing, research and development (R&D) and marketing resources. These competitors may:

We also face competition from the manufacturing operations of our current and potential customers, who are continually evaluating the merits of manufacturing products internally against the advantages of outsourcing. In the past, some of our customers moved a portion of their manufacturing from us in order to more fully utilize their excess internal manufacturing capacity.

The actions of competitors and current and potential customers could cause a decline in our sales and/or compression of our profits.

Our business could be adversely affected by any delays, or increased costs, resulting from common carrier or transportation issues.

We rely on a variety of common carriers to transport our materials from our suppliers and to our customers. Problems suffered by any of these common carriers, including natural disaster, labor problems, increased energy prices, or criminal activity, could result in shipping delays for products or materials, increased costs or other supply chain disruptions, and could therefore have a negative impact on our ability to receive products from suppliers and deliver products to customers, resulting in a material adverse effect on our operations.

We may not be able to maintain our engineering, technological and manufacturing expertise.

Many of the markets for our manufacturing and engineering services are characterized by rapidly changing technology and evolving process development. The continued success of our business will depend upon our ability to:

Although we believe that our operations use the assembly and testing technologies, equipment and processes that are currently required by our customers, we cannot be certain that we will be able to maintain or develop the capabilities required by our customers in the future. The emergence of new technology, industry standards or customer requirements may render our equipment, inventory or processes obsolete or noncompetitive. The acquisition and implementation of new technologies and equipment and the offering of new or additional services to our customers may require significant expense or capital investment, which could reduce our operating margins and our operating results. In facilities that we newly establish or acquire, we may not be able to insert or maintain our engineering, technological and manufacturing process expertise. Our failure to anticipate and adapt to our customers’ changing technological needs and requirements or to hire sufficient personnel to maintain our engineering, technological and manufacturing expertise could have a material adverse effect on our results of operations.

We depend on attracting and retaining officers, managers and skilled personnel.

Our success depends to a large extent upon the continued services of our officers, managers and skilled personnel. These employees are not generally bound by employment ornon-competition agreements, and we cannot assure you that we will retain them. To aid in managing our growth and strengthening our pool of management and skilled personnel, we will need to internally develop, recruit and retain skilled management personnel. If we are not able to do so, our business and our ability to continue to grow could be harmed.

We depend on a limited number of suppliers for components that are critical to our manufacturing processes. A shortage of these components or an increase in their price could interrupt our operations and reduce our profit, increase our inventory carrying costs, increase our risk of exposure to inventory obsolescence and cause us to purchase components of a lesser quality.

Most of our significant long-term customer contracts permit quarterly or other periodic adjustments to pricing based on decreases and increases in component prices and other factors; however, we typically bear the risk of component price increases that occur between any suchre-pricings or, if suchre-pricing is not permitted, during the balance of the term of the particular customer contract. Accordingly, certain component price increases could adversely affect our gross profit margins and results of operations.

Almost allSome of the products we manufacture require one or more components that are only available from a single source. Some of these components are subject to supply shortages from time to time. In some cases, supply shortages will substantially curtail production of all assemblies using a particular component. A supply shortage can also increase our cost of goods sold if we have to pay higher prices for components in limited supply, or cause us to have to redesign or reconfigure products to accommodate a substitute component. In the past there have been industry wide conditions, natural disasters and global events that have caused material shortages. Our production of a customer’s product could be negatively impacted by any quality, reliability or availability issues with any of our component suppliers. The financial condition of our suppliers could affect their ability to supply us with components and their ability to satisfy any warranty obligations they may have, which could have a material adverse effect on our results of operations.

If a component shortage is threatened or anticipated, we may purchase such components early to avoid a delay or interruption in our operations. Purchasing components early may cause us to incur additional inventory carrying costs and may cause us to experience inventory obsolescence, both of which may not be recoverable from our customers and could adversely affect our gross profit margins and net income. A component shortage may also require us to look to second tier vendors or to procure components through brokers with whom we are not familiar. These components may be of lesser quality than those we have historically purchased and could cause us to incur costs to bring such components up to our quality levels or to replace defective ones. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business – Components Procurement.”

We derive a substantial majority of our revenues from our international operations, which may be subject to a number of different risks and often require more management time and expense than our domestic operations.

Our international operations are subject to a number of risks, including:

In particular, a significant portion of our manufacturing, design, support and storage operations are conducted in our facilities in China, and revenues associated with our China operations are important to our success. Therefore, our business, financial condition and results of operations may be materially adversely affected by economic, political, legal, regulatory, competitive and other factors in China. International trade disputes with China could result in tariffs and other measures that could adversely affect the Company’s business. The Chinese economy differs from the economies of most developed countries in many respects, including the level of government involvement and control over economic growth. In addition, our operations in China are governed by Chinese laws, rules and regulations, some of which are relatively new. The Chinese legal system continues to rapidly evolve, which may result in uncertainties with respect to the interpretation and enforcement of Chinese laws, rules and regulations that could have a material adverse effect on our business. China experiences high turnover of direct labor in the manufacturing sector due to the intensely competitive and fluid market for labor, and the retention of adequate labor is a challenge. If our labor turnover rates are higher than we expect, or we otherwise fail to adequately manage our labor needs, then our business and results of operations could be adversely affected. We are also subject to risks associated with our subsidiaries organized in China. For example, regulatory and registration requirements and government approvals affect the financing that we can provide to our subsidiaries. If we fail to receive required registrations and approvals to fund our subsidiaries organized in China, subsidiaries, or if our ability to remit currency out of China is limited, then our business and liquidity could be adversely affected.

These factors may harm our results of operations. Also, any measures that we may implement to reduce risks of our international operations may not be effective, may increase our expenses and may require significant management time and effort. Entry into new international markets requires considerable management time as well asstart-up expenses related to market, personnel and facilities development before any significant revenue is generated. As a result, initial operations in a new market may operate at low margins or may be unprofitable.

Although we have implemented policies and procedures designed to cause compliance with the FCPA and similar laws, there can be no assurance that all of our employees and agents, as well as those companies to which we outsource certain of our business operations, will not take actions in violation of our policies which could have a material adverse effect on our operations.

We have on occasion not achieved, and may not in the future achieve, expected profitability from our acquisitions.

We have in the past and will continue to seek and complete acquisitions. We cannot assure you that we will be able to successfully integrate the operations and management of our recent acquisitions. Similarly, we cannot assure you that we will be able to identify future strategic acquisitions and adequately conduct due diligence, consummate these potential acquisitions on favorable terms, if at all, or if consummated, successfully integrate the operations and management of future acquisitions. Acquisitions involve significant risks, which could have a material adverse effect on us including:

Although we conduct what we believe to be a prudent level of due diligence regarding the businesses we purchase, in light of the circumstances of each transaction, an unavoidable level of risk remains regarding the actual condition of these businesses. Until we actually assume operating control of such businesses and their assets and operations, we may not be able to ascertain the actual value or understand the potential liabilities of the acquired entities and their operations.

Most of our acquisitions involve operations outside of the U.S., which are subject to various risks including those described in “Risk Factors – We derive a substantial majority of our revenue from our international operations, which may be subject to a number of risks and often require more management time and expense than our domestic operations.”

We have acquired and may continue to pursue the acquisition of manufacturing and supply chain management operations from our customers (or potential customers). In these acquisitions, the divesting company will typically enter into a supply arrangement with the acquirer. Therefore, our competitors often also pursue these acquisitions. In addition, certain divesting

companies may choose not to offer to sell their operations to us because of our current supply arrangements with other companies or may require terms and conditions that may impact our profitability. If we are unable to attract and consummate some of these acquisition opportunities at favorable terms, our growth and profitability could be adversely impacted.

We have expanded the primary scope of our acquisitions strategy beyond focusing on acquisition opportunities presented by companies divesting internal manufacturing operations. As we continue to pursue acquisitions that diversify our business into new industry sectors with new customers and services, the amount and scope of the risks associated may extend beyond those that we have traditionally faced in making acquisitions. These risks include greater uncertainties in the financial benefits and potential liabilities associated with this expanded base of acquisitions.

We face risks arising from the restructuring of our operations.

Over the past several years, we have undertaken initiatives to restructure our business operations with the intention of improving utilization and realizing cost savings. These initiatives have included changing the number and location of our production facilities, largely to align our capacity and infrastructure with current and anticipated customer demand. The process of restructuring entails, among other activities, moving production between facilities, transferring programs from higher cost geographies to lower cost geographies, closing facilities, reducing the level of staff, realigning our business processes and reorganizing our management.

Restructurings could adversely affect us, including a decrease in employee morale, delays encountered in finalizing the scope of, and implementing, the restructurings, failure to achieve targeted cost savings, and failure to meet operational targets and customer requirements due to the restructuring process. These risks are further complicated by our extensive international operations, which subject us to different legal and regulatory requirements that govern the extent and speed of our ability to reduce our manufacturing capacity and workforce.

When financial markets experience significant turmoil, the financial arrangements we may need to enter into, refinance or repay and our customers may be adversely affected.

Credit market turmoil could negatively impact the counterparties and lenders to our forward foreign exchange contracts, trade accounts receivable securitization and sale programs, unsecured credit and term loan facilities, various foreign subsidiary credit facilities and other debt facilities. These potential negative impacts could limit our ability to borrow under these financing agreements, contracts, facilities and programs or renew or obtain future additional financing. Credit market turmoil could also negatively impact certain of our customers and certain of their respective customers, which could cause them to reduce or cancel their orders and have a negative effect on our results of operations.

We can offer no assurance under the uncommitted trade accounts receivable sales programs that if we attempt to sell receivables through such programs in the future that we will receive funding from the associated banks, which would require us to utilize other available sources of liquidity, including our revolving credit facilities.

We are subject to increasingly extensive government regulations and industry standards;standards and the terms of complex contracts; a failure to comply with current and future regulations and standards, or the terms of our contractual arrangements, could have an adverse effect on our business, customer relationships, reputation and profitability.

We are subject to extensive government regulation and industry standards relating to the products we design and manufacture as well as how we conduct our business, including regulations and standards relating to labor and employment practices, workplace health and safety, the environment, sourcing and import/export practices, the market sectors we support, privacy and data protection, the regulations that apply to government contracts, and many other facets of our operations. The regulatory climate in the U.S. and other countries has become increasingly complex and fragmented, and regulatory activity has increased in recent periods. Failure or noncompliance with such regulations or standards could have an adverse effect on our reputation, customer relationships, profitability and results of operations. In addition, we annually enter into a large number of complex contractual arrangements as well as operate pursuant to the terms of a significant number of ongoing intricate contractual arrangements. Our failure to comply with the terms of such arrangements could have an adverse effect on our reputation, customer relationships, profitability and results of operations.

If we manufacture products containing design or manufacturing defects, demand for our services may decline, our reputation may be damaged and we may be subject to liability claims.

Our customers’ products and the manufacturing processes and design services that we use to produce them often are highly complex. Defects in the products we manufacture or design, whether caused by a design, manufacturing or component failure or error, or deficiencies in our manufacturing processes, may result in delayed shipments to customers or reduced or canceled customer orders. If these defects or deficiencies are significant, our business reputation may also be damaged. The failure of the products that we manufacture or of our manufacturing processes or facilities may subject us to regulatory enforcement, fines or penalties and, in some cases, require us to shut down, temporarily halt operations or incur considerable expense to correct a manufacturing process or facility. In addition, these defects may result in liability claims against us, expose us to liability to pay for the recall or remanufacture of a product or adversely affect product sales or our reputation. Even if our customers are responsible for the defects or defective specifications, they may not, or may not have resources to, assume responsibility for any costs or liabilities arising from these defects, which could expose us to additional liability claims. Any of these actions could increase our expenses, reduce our revenue or damage our reputation as a supplier to these customers.

We may face heightened liability risks specific to our medical device business as a result of additional healthcare regulatory related compliance requirements and the potential severe consequences (e.g., death or serious injury) that could result from manufacturing defects or malfunctions of the medical devices we manufacture or design.

As a manufacturerservice provider engaged in the business of designing and designer ofmanufacturing medical devices for our customers, we have compliance requirements in addition to those relating to other areas ofindustries we serve within our business. We are required to register with the U.S. Food and Drug Administration (“FDA”) and are subject to periodic inspection by the FDA for compliance with the FDA’s Quality System Regulation (“QSR”) and, including current Good Manufacturing Practices (cGMP)(cGMPs). This regulation establishes requirements which requirefor manufacturers of medical devices to adhere to certain regulations and to implement design and process manufacturing controls, quality control, labeling, handling and documentation procedures. The FDA, through periodic inspections and product field monitoring, continually reviewspost-market surveillance, continuously and rigorously monitors compliance with these QSR requirements and other applicable regulatory requirements. If any FDA inspection reveals noncompliance, and we do not address the FDA’s concerns to its satisfaction, the FDA may elect to take enforcement action against us, including issuing inspection observations or a notice of violation or a warning letter, imposing fines, bringing an action against the Company and its officers, requiring a recall of the products we manufactured, issuing an import detention on products entering the U.S. from an offshore facility or temporarily halting operations at or shutting down a manufacturing facility.

Beyond the FDA, our medical device business is also subject to additionalapplicable state and foreign regulatory requirements. Within the European Union (“EU”), we are required to fulfill certain internationally recognized standards and must undergo periodic inspections to obtain and maintain certifications to these standards. Continued noncompliance to the EU regulations could stop the flow of products into the EU from us or from our customers. In China, the Safe Food and Drug Administration controls and regulates the manufacture and commerce of healthcare products. We must comply with the regulatory laws applicable to medical device manufactures or our ability to manufacture products in China could be impacted. In Japan, the Pharmaceutical Affairs Laws regulate the manufacture and commerce of healthcare products. These regulations also require that subcontractors manufacturing products intended for sale in Japan register with authorities and submit to regulatory audits. Other foreign countries where we operate have similar laws regarding the regulation of medical device manufacturing. In the event of any noncompliance with these requirements, interruption of our operations and/or ability to allow commerce in these markets could occur, which in turn could cause our reputation and business couldto suffer.

Compliance or the failure to comply with current and future environmental, health and safety, product stewardship and producer responsibility laws or regulations could cause us significant expense.

We are subject to a variety of federal, state, local and foreign environmental, health and safety, product stewardship and producer responsibility laws and regulations, including those relating to the use, generation, storage, discharge and disposal of hazardous chemicals used during our manufacturing process, those governing worker health and safety, those requiring design changes, supply chain investigation or conformity assessments and those relating to the recycling or reuse of products we manufacture. If we fail to comply with any present or future regulations or timely obtain any needed permits, we could become subject to liabilities, and we could face fines or penalties, the suspension of production, or prohibitions on sales of products we manufacture. In addition, such regulations could restrict our ability to expand our facilities or could require us to acquire costly equipment, or to incur other significant expenses, including expenses associated with the recall of anynon-compliant product or with changes in our operational, procurement and inventory management activities.

Certain environmental laws impose liability for the costs of investigation, removal and remediation of hazardous or toxic substances on an owner, occupier or operator of real estate, or on parties who arranged for hazardous substance treatment or disposal, even if such person or company was unaware of, or not responsible for, contamination at the affected site. Soil and groundwater contamination may have occurred at or near, or may have arisen from, some of our facilities. From time to time we investigate, remediate and monitor soil and groundwater contamination at certain of our operating sites. In certain instances where contamination existed prior to our ownership or occupation of a site, landlords or former owners have retained some contractual responsibility for contamination and remediation. However, failure of such persons to perform those obligations

could result in us being required to address such contamination. As a result, we may incurclean-up costs in such potential removal or remediation efforts. In other instances, we may be responsible forclean-up costs and other liabilities, including the possibility of claims due to health risks by both employees andnon-employees, as well as other third-party claims in connection with contaminated sites.

In addition, there is an increasing governmental focus around the world on global warming and environmental impact issues, which may result in new environmental, health and safety regulations that may affect us, our suppliers and our customers. This could cause us to incur additional direct costs for compliance, as well as increased indirect costs resulting from our customers, suppliers or both incurring additional compliance costs that get passed on to us. These costs may adversely impact our operations and financial condition.

We have limited insurance coverage for potential environmental liabilities associated with current operations and we do not anticipate increasing such coverage in the future.

Our manufacturing, production and design processes and services may result in exposure to intellectual property infringement and other claims.

Providing manufacturing services can expose us to potential claims that products, designs or manufacturing processes we use infringe third party intellectual property rights. Even though many of our manufacturing services contracts require our customers to indemnify us for infringement claims relating to their products, including associated product specifications and designs, a particular customer may not, or may not have the resources to, assume responsibility for such claims. In addition, we may be responsible for claims that our manufacturing processes or components used in manufacturing infringe third party intellectual property rights. Providing turnkey design solutions, and design and other services can expose us to different or greater potential liabilities than those we face providing just manufacturing services, including an increase in exposure to potential claims that products we design or supply, or materials or components we use, infringe third party property rights. Infringement claims could subject us to significant liability for damages, potential injunctive action, or hamper our normal operations such as by interfering with the availability of components. Regardless of merits of any such claim, it could be time-consuming and expensive to resolve, and have a material adverse effect on our results of operations and financial position. In the event of such a claim, we may spend significant amounts of money and effort to developnon-infringing alternatives or obtain and maintain licenses. We may not be successful in developing such alternatives or obtaining and maintaining such licenses on reasonable terms or at all. Our customers may be required to or decide to discontinue products that are alleged to be infringing rather than face continued costs of defending infringement claims, and such discontinuance may result in a significant decrease in our business and/or could have a material adverse effect on our results of operations and financial position. These risks may be heightened in connection with our customer relationships with emerging companies.

Components we purchase, products we design and/or manufacture and/or services we provide may infringe the intellectual property rights of third parties, some of whom may hold key intellectual property rights in areas in which we operate. Our customers or suppliers could also become subject to infringement claims. Patent clearance or licensing activities, if any, may be inadequate to anticipate and avoid third party claims. Additionally, customers for our services in which we have significant technology contributions, typically require that we indemnify them against the risk of intellectual property infringement. If any claims are brought against our customers, our suppliers or us for such infringement, regardless of their merits, we could be required to expend significant resources in the defense or settlement of such claims, or in the defense or settlement of related indemnification claims. In the event of a claim, we may be required to spend significant amounts of money and effort to developnon-infringing alternatives or obtain and

maintain licenses. We may not be successful in developing such alternatives or obtaining or maintaining such licenses on reasonable terms or at all. We, our suppliers or our customers may be required to or decide to discontinue products which are alleged to be infringing rather than face continued costs of defending the infringement claims, and such discontinuance may result in a significant decrease in our business, and could have a material adverse effect on our results of operations and financial position.

The success of certain aspects of our business depends in part on our ability to obtain, protect and leverage intellectual property rights.

In certain circumstances, we strive to obtain and protect certain intellectual property rights related to solutions, designs, processes and products that we create. We believe that obtaining a significant level of protected proprietary technology may give us a competitive advantage. In addition to selectively relying on patent rights, we rely on unpatented proprietaryknow-how and trade secrets, and employ various methods, includingnon-disclosure agreements with our customers, employees and suppliers and our internal security systems, policies and procedures to protect ourknow-how and trade secrets. However, we cannot be certain the measures we employ will result in protected intellectual property rights or will result in the prevention of

unauthorized use of our technology. If we are unable to obtain and protect intellectual property rights embodied within our solutions, designs, processes and products, this could reduce or eliminate competitive advantages of our proprietary technology, which would harm our business and could have a material adverse effect on our results of operations and financial position.

Even if we take steps to protect certain intellectual property rights, these mechanisms may not afford complete or sufficient protection, and misappropriation may still occur. Further, there can be no assurance that we will be able to acquire or enforce our patent or other rights, if any, and that others will not independently develop similarknow-how and trade secrets, or develop better production methods than us. We have not historically sought patent protection for many of our proprietary processes, designs or other patentable intellectual property. Further, we may not be able to prevent current and former employees, contractors and other parties from breachingnon-disclosure agreements and misappropriating proprietary information. If any of the foregoing occur, it could impair our ability to compete with others in our industry, result in a significant decrease in our business and/or could have material adverse effect on our results of operations and financial position.

Any delay in the implementation of our information systems could disrupt our operations and cause unanticipated increases in our costs.

We are currently in the process of completing the installation of an enterprise resource planning system in certain of our manufacturing facilities, which will replace the existing planning and financial information systems. Any delay in the implementation of these information systems could result in material adverse consequences, including disruption of operations, loss of information and unanticipated increases in costs.

Disruptions to our information systems, including security breaches, losses of data or outages, and other security issues, could adversely affect our operations.

We rely on information systems, some of which are owned and operated by third parties, to store, process and transmit confidential information, including financial reporting, inventory management, procurement, invoicing and electronic communications, belonging to our customers, our suppliers, our employees and/or us. We attempt to monitor and mitigate our exposure and modify our systems when warranted and we have implemented certain business continuity items including data backups at alternative sites. Nevertheless, these systems are vulnerable to, and at times have suffered from, among other things, damage from power loss or natural disasters, computer system and network failures, loss of telecommunication services, physical and electronic loss of data, terrorist attacks, security breaches and computer viruses. We regularly face attempts by others to access our information systems in an unauthorized manner, to introduce malicious software to such systems or both. The increased use of mobile technologies can heighten these and other operational risks. If we, or the third parties who own and operate certain of our information systems, are unable to prevent such breaches, losses of data and outages, our operations could be disrupted. Also, the time and funds spent on monitoring and mitigating our exposure and responding to breaches, including the training of employees, the purchase of protective technologies and the hiring of additional employees and consultants to assist in these efforts could adversely affect our financial results. The increasing sophistication of cyberattacks requires us to continually evaluate new technologies and processes intended to detect and prevent these attacks. There can be no assurance that the security measures we choose to implement will be sufficient to protect the data we manage. Finally, any theft or misuse of information resulting from a security breach could result in, among other things, loss of significant and/or sensitive information, litigation by affected parties, financial obligations resulting from such theft or misuse, higher insurance premiums, governmental investigations, negative reactions from current and potential future customers (including potential negative financial ramifications under certain customer contract provisions) and poor publicity and any of these could adversely affect our financial results.

We are subject to the risk of increased taxes.

We base our tax position upon the anticipated nature and conduct of our business and upon our understanding of the tax laws of the various countries in which we have assets or conduct activities. Our tax position, however, is subject to review and possible challenge by taxing authorities and to possible changes in law (including adverse changes to the manner in which the U.S. and other countries tax multinational companies or interpret their tax laws). We cannot determine in advance the extent to which some

jurisdictions may assess additional tax or interest and penalties on such additional taxes. In addition, our effective tax rate may be increased by the generation of higher income in countries with higher tax rates, changes in the valuation of deferred tax assets and liabilities, changes in our cash management strategies, changes in local tax rates or countries adopting more aggressive interpretations of tax laws.

In the United States, comprehensive tax legislation commonly referred to as the Tax Cuts and Jobs Act of 2017 (“Tax Act”) was enacted on December 22, 2017. The Tax Act contains a broad range of tax reform provisions that reduced the corporate tax rate, limited or eliminated certain tax deductions, and changed the taxation of foreign earnings of U.S. multinational companies. The Tax Act requires complex calculations to be performed that were not previously required in U.S. tax law, significant judgments, estimates in calculations, and the preparation and analysis of information not previously relevant or regularly produced. The U.S. Treasury Department, the Internal Revenue Service, and other standard-setting bodies could interpret or issue guidance on how provisions of the Tax Act will be applied or otherwise administered that are different from our interpretation. In response to the Tax Act, foreign governments may enact new tax laws or new interpretations of the existing tax laws. The full extent of the impact remains uncertain at this time and could adversely impact our effective tax rate and operating results.

Refer to Note 54 – “Income Taxes” to the Consolidated Financial Statements for details of the field examinations completed by the Internal Revenue Service (“IRS”) of our tax returns for the fiscal years 2012 through 2014 and fiscal years 2009 through 2011 which resulted in proposed adjustments. While we currently believe that the resolution of these issues will not have a material adverse effect on our financial position, results of operations or cash flows, an unfavorable resolution could have a material adverse effect on our operating results of operations and financial condition.

Several countries in which we are located allow for tax incentives to attract and retain business. We have obtained incentives where available and practicable. Our taxes could increase if certain tax incentives are retracted, which could occur if we are unable to satisfy the conditions on which such incentives are based, if they are not renewed upon expiration, or if tax rates applicable to us in such jurisdictions otherwise increase. It is not anticipated that any material tax incentives will expire within the next year. However, due to the possibility of changes in existing tax law and our operations, we are unable to predict how any expirations will impact us in the future. In addition, acquisitions may cause our effective tax rate to increase, depending on the jurisdictions in which the acquired operations are located.

Certain of our subsidiaries provide financing, products and services to, and may undertake certain significant transactions with, other subsidiaries in different jurisdictions. Several jurisdictions in which we operate have tax laws with detailed transfer pricing rules that require that all transactions withnon-resident related parties be priced using arm’s length pricing principles, and that contemporaneous documentation must exist to support such pricing. There is a risk that the taxing authorities may not deem our transfer pricing documentation acceptable. In addition, the Organization for Economic Cooperation and Development (“OECD”) released guidancecontinues to issue guidelines and proposals related to Base Erosion and Profit Shifting (“BEPS”) which may result in legislative changes that could reshape international tax rules in numerous countries and negatively impact our effective tax rate.

Our credit rating may be downgraded.

Our credit is and certain of our financial instruments are rated by credit rating agencies. Any potential future negative change in our credit ratings may make it more expensive for us to raise additional capital on terms that are acceptable to us, if at all; negatively impact the price of our common stock; increase our interest payments under existing debt agreements; and have other negative implications on our business, many of which are beyond our control. In addition, the interest rate payable onunder the 8.250% Senior Notes and under the2017 Credit Facility (as such terms are defined in 9Note 8 – “Notes Payable and Long-Term Debt and Capital Lease Obligations”Debt” to the Consolidated Financial Statements) is subject to adjustment from time to time if our credit ratings change. Thus, any potential future negative change in our credit rating may increase the interest rate payable on the 8.250% Senior Notes, the2017 Credit Facility and certain of our other borrowings.

Our amount of debt could significantly increase in the future.

The Company has a number of debt facilities. Refer to “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Liquidity and Capital Resources” and Note 98 – “Notes Payable and Long-Term Debt and Capital Lease Obligations”Debt” to the Consolidated Financial Statements for further details.

Should we desire to consummate significant additional acquisition opportunities, undertake significant additional expansion activities, or make substantial investments in our infrastructure or enter into a stock repurchase program,in support of customer opportunities, our capital needs would increase and could possibly result in our need to increase available borrowings under our revolving credit facilities or access public or private debt and equity markets. There can be no assurance, however, that we would be successful in raising additional debt or equity on terms that we would consider acceptable. An increase in the level of our indebtedness, among other things, could:

There can be no assurance that we will be able to meet future debt service obligations.

An adverse change in the interest rates for our borrowings could adversely affect our financial condition.

We pay interest on outstanding borrowings under our revolving credit facilities and certain other long term debt obligations at interest rates that fluctuate based upon changes in various base interest rates. An adverse change in the base rates upon which our interest rates are determined could have a material adverse effect on our financial position, results of operations and cash flows. If certain economic or fiscal issues occur, interest rates could rise, which would increase our interest costs and reduce our net income. Also, increased interest rates could make any future fixed interest rate debt obligations more expensive.

We are subject to risks of currency fluctuations and related hedging operations.

Although a significant number of our operations are located outside the United States, the majority of our business is conducted in U.S. dollars. Changes in exchange rates will affect our net revenue, cost of sales, operating margins and net income. We cannot predict the impact of future exchange rate fluctuations. We use financial instruments, primarily forward contracts, to hedge our exposure to exchange rate fluctuations. We believe that our hedging activities enable us to largely protect ourselves from future exchange rate fluctuations. If, however, these hedging activities are not successful, if the counterparties to these hedging activities default on their obligations to us or if we change or reduce these hedging activities in the future, we may experience significant unexpected expenses from fluctuations in exchange rates. In addition, certain countries in which we operate have adopted, or may adopt, currency controls requiring that local transactions be settled only in local currency. Such controls could require us to hedge larger amounts of local currency than we have in the past.

Changes in financial accounting standards or policies have affected, and in the future may affect, our reported financial condition or results of operations.

We prepare our financial statements in conformity with U.S. GAAP. These principles are subject to interpretation by the Financial Accounting Standards Board (FASB), the American Institute of Certified Public Accountants, the SEC and various bodies formed to interpret and create appropriate accounting policies. A change in these policies can have a significant effect on our reported results and may affect our reporting of transactions that are completed before a change is announced. Changes to those rules or questions as to how we interpret or implement them may have a material adverse effect on our reported financial results or on the way we conduct business. For example, significant changes to revenue recognition rules have been adopted and will begin to apply to us in fiscal year 2019.

Energy price increases may negatively impact our results of operations.

Certain of the components that we use in our manufacturing activities are petroleum-based. In addition, we, along with our suppliers and customers, rely on various energy sources (including oil) in our facilities and transportation activities. An increase in energy prices, which have been volatile historically, could cause an increase in our raw material costs and transportation costs. In addition, increased transportation costs of certain of our suppliers and customers could be passed along to us. We may not be able to increase our product prices enough to offset these increased costs. In addition, any increase in our product prices may reduce our future customer orders and profitability.

We are subject to risks associated with natural disasters, climate change and global events.

Our operations and those of our customers and suppliers may be subject to natural disasters, climate change-related events, or other business disruptions, which could seriously harm our results of operation and increase our costs and expenses. We are susceptible to losses and interruptions caused by hurricanes (including in Florida, where our headquarters are located), earthquakes, power shortages, telecommunications failures, water or other natural resource shortages, tsunamis, floods, typhoons, drought, fire, extreme weather conditions, rising sea level, geopolitical events such as direct or indirect terrorist acts or acts of war, other natural or manmade disasters, boycotts and sanctions or widespread criminal activities. Such events could make it difficult or impossible to manufacture or to deliver products to our customers, receive production materials from our suppliers, or perform critical functions, which could adversely affect our business globally or in certain regions. While we maintain similar manufacturing capacities at different locations and coordinate multi-source supplier programs on many of our materials, which we believe better enables us to respond to these types of events, we cannot be sure that our plans will fully protect us from all such disruptions. Our insurance coverage with respect to natural disasters is limited and is subject to deductibles and coverage limits. Such coverage may not be adequate, or may not continue to be available at commercially reasonable rates and terms.

While we manufacture our products in a large number of diversified facilities and maintain insurance covering our facilities, including business interruption insurance, a catastrophic loss of the use of all or a portion of one of our key manufacturing facilities due to accident, labor issues, weather conditions, natural disaster or otherwise, whether short- or long-term, could have a material adverse effect on us.

Item 1B.Unresolved1B. Unresolved Staff Comments

There are no unresolved written comments from the SEC staff regarding our periodic or current reports.

Item 2.Properties2. Properties

We own or lease facilities located in the countries listed below. We believe that our properties are generally in good condition, are well maintained and are generally suitable and adequate to carry out our business at expected capacity for the foreseeable future.

The table below lists the approximate square footage for our facilities as of August 31, 2017:2018:

As of August 31, 2017,2018, our facilities consist of 18,523,00018,821,000 square feet in facilities that we own, with the remaining 23,549,00025,792,000 square feet in leased facilities. The majority of the square footage in the table above is active manufacturing space. The properties listed in the table above are reported in both the EMS and DMS operating segments, as both segments use these properties. Our manufacturing facilities are ISO certified to ISO 9001:2008 standards and most are also certified toISO-14001:2004 environmental standards.

Item 3.Legal3. Legal Proceedings

We are party to certain lawsuits in the ordinary course of business. We do not believe that these proceedings, individually or in the aggregate, will have a material adverse effect on our financial position, results of operations or cash flows.

Item 4.Mine4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information and Dividends

Our common stock trades on the New York Stock Exchange under the symbol “JBL.” The following table sets forth the high and low intraday sales prices per share for our common stock as reported on the New York Stock Exchange and the cash dividends declared per share for the fiscal periods indicated:

We expect to continue to declare and pay quarterly dividends of an amount similar to our past declarations. However, the declaration and payment of future dividends are discretionary and will be subject to determination by our Board of Directors each quarter following its review of our financial performance.

On October 10, 2017,9, 2018, the closing sales price for our common stock as reported on the New York Stock Exchange was $28.57.$24.71. As of October 10, 2017,9, 2018, there were 1,4441,380 holders of record of our common stock. A substantially greater number of holders of our common stock are “street name” or beneficial holders, whose shares are held of record by banks, brokers, and other financial institutions.

Information regarding equity compensation plans is incorporated by reference to the information set forth in Item 12 of Part III of this report.

Dividends

The following table sets forth certain information relating to our cash dividends declared to common stockholders during fiscal years 2017 and 2016:

Dividend Information

We expect to continue to declare and pay quarterly dividends of an amount similar to our past declarations. However, the declaration and payment of future dividends are discretionary and will be subject to determination by our Board of Directors each quarter following its review of our financial performance.

Stock Performance Graph

The performance graph and table show a comparison of cumulative total stockholder return, assuming the reinvestment of dividends, from a $100 investment in the common stock of Jabil over the five-year period ending August 31, 2017,2018, with the cumulative stockholder return of the (1) S&P MidCap 400 Index and (2) Peerpeer group thatwhich includes Celestica Inc., Catcher Technology Co., Ltd, Flextronics InternationalFlex Ltd.,Hon-Hai Precision Industry Co. Ltd, Plexus Corp., and Sanmina Corp.

Comparison of 5 Year Cumulative Total Return

Issuer Purchases of Equity Securities

The following table provides information relating to our repurchase of common stock during the three months ended August 31, 2017:2018:

(3)

In July 2017, our Board of Directors authorized the repurchase of up to $450.0 million of our common stock as publicly announced in a press release issued on July 20, 2017 (the “2017 Share Repurchase Program”). The share2017 Share Repurchase Program expired on August 31, 2018. No authorization remains under the 2017 Share Repurchase Program.

(3)	In June 2018, our Board of Directors authorized the repurchase programof up to $350.0 million of our common stock as publicly announced in a press release on June 14, 2018 (the “2018 Share Repurchase Program”). The 2018 Share Repurchase Program expires on August 31, 2018.2019.

Issuer Sale of Unregistered Securities

On August 16, 2018, as part of a commercial transaction with a third party, the Company issued a cash settled restricted stock appreciation right. The instrument has aten-year term and will vest biannually, subject to the satisfaction of performance conditions. Assuming full vesting and exercise at the end of the term, the aggregate amount to be paid by the Company would not in any case exceed $26.0 million. The instrument was issued pursuant to the private placement exemption in Section 4(a)(2) of the Securities Act of 1933, as amended.

Item 6. Selected Financial Data

The following selected data is derived from our Consolidated Financial Statements. This data should be read in conjunction with the Consolidated Financial Statements and notes thereto incorporated into Item 8, “Financial Statements and Supplementary Data” and with Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Overview

We are one of the leading providers of worldwide manufacturing services and solutions. We provide comprehensive electronics design, production and product management services to companies in the automotivevarious industries and transportation, capital equipment, consumer lifestyles and wearable technologies, computing and storage, defense and aerospace, digital home, healthcare, industrial and energy, mobility, networking and telecommunications, packaging, point of sale and printing industries.

end markets. We derive substantially all of our revenue from production and product management services (collectively referred to as “manufacturing services”), which encompass the act of producing tangible components that are built to customer specifications and are then provided to the customer.

We have two reporting segments: Electronics Manufacturing Services (“EMS”) and Diversified Manufacturing Services (“DMS”), which are organized based on the economic profiles of the services performed, including manufacturing capabilities, market strategy, margins, return on capital and risk profiles. Our EMS segment is focused around leveraging IT, supply chain design and engineering, technologies largely centered on core electronics, utilizing our large scale manufacturing infrastructure and our ability to serve a broad range of end markets. Our EMS segment is typically a lower-margin but high volume business that produces product at a quicker rate (i.e. cycle time) and in larger quantities and includes customers primarily in the automotive and transportation, capital equipment, computing and storage, defense and aerospace, digital home, industrial and energy, networking and telecommunications, point of sale and printing industries. Our DMS segment is focused on providing engineering solutions, with an emphasis on material sciences and technologies. Our DMS segment is typically a higher-margin business and includes customers primarily in the consumer lifestyles and wearable technologies, defense and aerospace,wearables, healthcare, mobility and packaging industries.

Our cost of revenue includes the cost of electronic components and other materials that comprise the products we manufacture; the cost of labor and manufacturing overhead; and adjustments for excess and obsolete inventory. As a provider of turnkey manufacturing services, we are responsible for procuring components and other materials. This requires us to commit significant working capital to our operations and to manage the purchasing, receiving, inspecting and stocking of materials. Although we bear the risk of fluctuations in the cost of materials and excess scrap, we periodically negotiate cost of materials adjustments with our customers. Net revenue from each product that we manufacture consists of an element based on the costs of materials in that product and an element based on the labor and manufacturing overhead costs allocated to that product. Our gross margin for any product depends on the mix between the cost of materials in the product and the cost of labor and manufacturing overhead allocated to the product.

Our operating results are impacted by the level of capacity utilization of manufacturing facilities; indirect labor costs; and selling, general and administrative expenses. Operating income margins have generally improved during periods of high production volume and high capacity utilization. During periods of low production volume, we generally have idle capacity and reduced operating income margins.

We monitor the current economic environment and its potential impact on both the customers we serve as well as our end-marketsend markets and closely manage our costs and capital resources so that we can try to respond appropriately as circumstances change.

We have consistently utilized advanced circuit design, production design and manufacturing technologies to meet the needs of our customers. To support this effort, our engineering staff focuses on developing and refining design and manufacturing technologies to meet specific needs of specific customers. Most of the expenses associated with these customer-specific efforts are reflected in our cost of revenue. In addition, our engineers engage in research and development (“R&D”) of new technologies that apply generally to our operations. The expenses of these R&D activities are reflected in the research and development line item within our Consolidated Statement of Operations.

An important element of our strategy is the expansion of our global production facilities. The majority of our revenue and materials costs worldwide are denominated in U.S. dollars, while our labor and utility costs in operations outside the U.S. are denominated in local currencies. We economically hedge certain of these local currency costs, based on our evaluation of the potential exposure as compared to the cost of the hedge, through the purchase of foreign currency exchange contracts. Changes in the fair market value of such hedging instruments are reflected within the Consolidated Statement of Operations and the Consolidated Statement of Comprehensive Income.

See Note 1312 – “Concentration of Risk and Segment Data” to the Consolidated Financial Statements.

In September 2017, our operations in Cayey, Puerto Rico received significant hurricane damage. While we are still assessingDuring the impact to our operations, we anticipate asset impairments and costs associated with business interruptions during the first half of fiscal year 2018.ended August 31, 2018, we recognized $11.3 million of expenses related to such damages, net of insurance proceeds of $24.9 million. We also expect that the majority of these costs less insurance deductions will ultimately be offset by insurance coverage.

Summary of Results

Net revenues for fiscal year 2017 increased approximately 3.9% to $19.1 billion compared to $18.4 billion for fiscal year 2016 primarily due to increased revenues due to new business from existing customers in our consumer lifestyles and wearable technologies business, and new business from existing customers in our healthcare and mobility businesses.

The following table sets forth, for the fiscal years ended August 31, 2018, 2017 2016 and 2015,2016, certain key operating results and other financial information (in thousands, except per share data):

Key Performance Indicators

Management regularly reviews financial andnon-financial performance indicators to assess the Company’s operating results. The following table sets forth, for the quarterly periods indicated, certain of management’s key financial performance indicators: