UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C.  20549

FORM 10-K

(Mark One)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 

For the fiscal year ended February 28, 2023

or

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 

For the transition period from __________ to __________                                                                     

Commission File No. 001-04978

Registrant’s Telephone Number, Including Area Code: (561) 848‑4311

Securities registered pursuant to Section 12(b) of the Act: 

Securities registered pursuant to Section 12(g) of the Act:

Common Stock, $0.01 par value

(Title of Class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,”  “accelerated filer,”  “smaller reporting company”, and "emerging growth company" in Rule 12b-2 of the Exchange Act. (Check one) :

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant as of August 31, 2022 was $13,684,715 (based on the closing sales price of the registrant’s common stock on that date).  

The number of shares of the registrant’s common stock, $0.01 par value, outstanding as of June 21, 2023, was 2,083,436.

Table of Contents

PART I

ITEM 1. BUSINESS

GENERAL

Solitron Devices, Inc., a Delaware corporation (the "Company" or "Solitron"), designs, develops, manufactures and markets solid‑state semiconductor components and related devices primarily for the military and aerospace markets. The Company manufactures a large variety of bipolar and metal oxide semiconductor ("MOS") power transistors, power and control hybrids, junction and power MOS field effect transistors ("Power MOSFETS"), field effect transistors and other related products. Most of the Company's products are custom made pursuant to contracts with customers whose end products are sold to the United States government. Other products, such as Joint Army/Navy ("JAN") transistors, diodes and Standard Military Drawings (“SMD”) voltage regulators, are sold as standard or catalog items.

The Company was incorporated under the laws of the State of New York in March 1959 and reincorporated under the laws of the State of Delaware in August 1987. For information concerning the Company’s financial condition, results of operations, and related financial data, you should review the “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the “Financial Statements and Supplementary Data” sections of this Annual Report. You should also review and consider the risks relating to the Company’s business, operations, financial performance, and cash flows below under “Risk Factors.”

PRODUCTS

The Company designs, manufactures and assembles bipolar and MOS power transistors, power and control hybrids, junction and Power MOSFETs, field effect transistors and other related products.

Set forth below by principal product type are the percentage contributions to the Company's total sales of each of the Company's principal product lines for the fiscal years ended February 28, 2023 and February 28, 2022.

The variation in the proportionate share of each product line for each period reflects changes emanating from a variety of sources including: demand, Congressional appropriations, the process and timing associated with awards of defense contracts, shifts in technology and consolidation of defense prime contractors. The Company’s microelectronic products can be classified as active electronic components. Active electronic components are those that control and direct the flow of electrical power by means of a control signal such as a voltage or current.

It is customary to subdivide active electronic components into those of a discrete nature and those which are non‑discrete. Discrete devices contain a single microelectronic element; and non-discrete devices consist of integrated circuits or hybrid circuits, which contain two or more elements, either active or passive, that are interconnected to make up an electrical circuit. An integrated circuit incorporates various active and passive elements into a single silicon chip. A hybrid circuit, on the other hand, comprises a number of individual components that are mounted onto a suitable surface material, interconnected by various means, and suitably encapsulated. Hybrid and integrated circuits can be analog or digital; presently, the Company manufactures analog components. The Company’s products are either standard devices, such as catalog type items (e.g., transistors and voltage regulators), or application‑specific devices, also referred to as custom or semi‑custom products. The latter are designed and manufactured to meet a customer’s particular requirements. For the fiscal years ended February 28, 2023 and February 28, 2022, respectively, approximately 89% and 86% of the Company’s sales have been of custom products, and the remaining 11% and 14%, respectively have been of standard or catalog products.

Approximately 81% of the semiconductor components produced by the Company are manufactured pursuant to approved Source Control Drawings (“SCD”) from the United States government and/or its prime contractors; the remainder are primarily JAN qualified products approved for use by the military. The Company’s semiconductor products are used as components of military, commercial, and aerospace electronic equipment, such as ground and airborne radar systems, power distribution systems, missiles, missile control systems, satellites, and space applications. The Company’s products have been used on the space shuttle and on the space missions to the moon, to Jupiter (on Galileo), and to Mars (on Global Surveyor and Mars Sojourner). For the fiscal years ended February 28, 2023 and February 28, 2022, approximately 81% and 85%, respectively, of the Company’s sales have been attributable to contracts with customers whose products are sold to the United States government. The remaining 19% and 15%, respectively of sales are for non-military, scientific and industrial applications, or to distributors where we do not have end user information.

Custom products are typically sold to the United States government and defense or aerospace companies, such as Raytheon Technologies Corporation, Lockheed Martin, L3Harris Technologies, General Electric Aviation, Honeywell International, and Northrop Grumman Systems Corporation, while standard products are sold to the same customer base and to the general electronic industry. The Company has standard and custom products available in all of its major product lines.

The following is a general description of the principal product lines manufactured by the Company.

Power Transistors

Power transistors are high current and/or high voltage control devices commonly used for active gain applications in electronic circuits. The Company manufactures a large variety of power bipolar transistors for applications requiring currents in the range of 0.1A to 300A or voltages in the range of 30V to 1000V. The Company employs over 60 types of silicon chips to manufacture over 500 types of power bipolar transistors and is currently expanding this line in response to increased market demand resulting from other companies’ departure from the military market. The Company also manufactures power diodes under the same military specification. The Company is qualified to deliver these products under MIL-PRF-19500 in accordance with JAN, JANTX and JANTXV. JAN, JANTX AND JANTXV denotes various quality military screening levels. The Company manufactures both standard and custom power transistors. Additionally, it manufactures power N‑Channel and P‑Channel MOSFET transistors and is continuously expanding that line in accordance with customers’ requirements.

The Company has been certified and qualified since 1968 under MIL-PRF-19500 (and its predecessor) standards promulgated by the Defense Supply Center Columbus (“DSCC”). These standards specify the uniformity and quality of bipolar transistors and diodes purchased for United States military programs. The purpose of the program is to standardize the documentation and testing for bipolar semiconductors for use in United States military and aerospace applications. Attainment of certification and/or qualification to MIL-PRF-19500 requirements is important since it is a prerequisite for a manufacturer to be selected to supply bipolar semiconductors for defense-related purposes. MIL-PRF-19500 establishes specific criteria for manufacturing construction techniques and materials used for bipolar semiconductors and assures that these types of devices will be manufactured under conditions that have been demonstrated to be capable of continuously producing highly reliable products. This program requires a manufacturer to demonstrate its products’ performance capabilities. A manufacturer receives certification once its Product Quality Assurance Program Plan is reviewed and approved by DSCC. A manufacturer receives qualification once it has demonstrated that it can build and test a sample product in conformity with its certified Product Quality Assurance Program Plan. The Company expects that its continued maintenance of MIL-PRF-19500 qualification will continue to improve its business posture by increasing product marketability. The Company continues to expand its power transistor product offering.

Hybrids

Hybrids are compact electronic circuits that contain passive and active components mounted on thick film printed substrates and encapsulated in appropriate packages. The Company manufactures thick film hybrids, which generally contain discrete semiconductor chips, integrated circuits, chip capacitors and thick film or thin film resistors. Most of the hybrids are of the high-power type and are custom manufactured for military and aerospace systems. Some of the Company’s hybrids include high power voltage regulators, power amplifiers, power drivers, boosters and controllers. The Company manufactures both standard and custom hybrids.

The Company has been certified (since 1990) and qualified (since 1995) under MIL-PRF-38534 Class H (and its predecessor) standards promulgated by the DSCC. These standards specify the uniformity and quality of hybrid products purchased for United States military programs. The purpose of the program is to standardize the documentation and testing for hybrid microcircuits for use in United States military and aerospace applications. Attainment of certification and/or qualification under MIL-PRF-38534 Class H requirements is important since it is a prerequisite for a manufacturer to be selected to supply hybrids for defense-related purposes. MIL-PRF-38534 Class H establishes definite criteria for manufacturing techniques and materials used for hybrid microcircuits and assures that these types of devices will be manufactured under conditions that have been demonstrated to be capable of continuously producing highly reliable products. This program requires a manufacturer to demonstrate its products’ performance capabilities. Certification is a prerequisite of qualification. A manufacturer receives certification once its Product Quality Assurance Program Plan is reviewed and approved by DSCC. A manufacturer receives qualification once it has demonstrated that it can build and test a sample product in conformity with its certified Product Quality Assurance Program Plan. The Company expects that its continued maintenance of MIL-PRF-38534 Class H qualification will continue to improve its business posture by increasing product marketability.

Voltage Regulators

Voltage regulators provide the power required to activate electronic components such as the integrated circuits found in all electronic devices from radar and missile systems to smart phones.

Power MOSFETs

Power MOSFETs perform the same function as bipolar transistors except that power MOSFETs are current controlled and bipolar transistors are voltage controlled. MOSFETs are popular due to their high input impedance, fast switching speed, and resistance to thermal runaway and secondary breakdown. Power MOSFETs are available in very high voltage and current ratings.

Field Effect Transistors

Field effect transistors are surface-controlled devices where conduction of electrical current is controlled by the electrical potential applied to a capacitively coupled control element. The Company manufactures about 30 different types of junction field effect transistor chips. They are used to produce over 350 different field effect transistor types. Most of the Company’s field effect transistors conform to standard Joint Electronic Device Engineering Council designated transistors, commonly referred to with standard 2N designation numbers. The Company continues to expand its field effect transistor product offering. The Company manufactures both standard and custom field effect transistors.

MANUFACTURING

The Company’s engineers design its transistors, diodes, field effect transistors and hybrids, as well as other customized products, based upon requirements established by customers, with the cooperation of the Company’s product and marketing personnel. The design of standard or catalog products is based on specific industry standards.

Each new design is first produced on a CAD/CAE (Computer Aided Design/Computer Aided Engineering) computer system. The design layout is then reduced to the desired geometry and transferred to silicon wafers in a series of steps that include photolithography, chemical or plasma etching, oxidation, diffusion and metallization. The wafers then go through a fabrication process. When the process is completed, each wafer contains a large number of silicon chips, each chip being a single transistor device or a single diode. The wafers are tested using a computerized test system prior to being separated into individual chips. The chips are then assembled in standard or custom packages, incorporated in hybrids or sold as chips to other companies. The chips are normally mounted inside a chosen package using eutectic, solder or epoxy die attach techniques, and then wire bonded to the package pins using gold or aluminum wires. Many of the packages are manufactured by the Company and, in most cases, the Company plates its packages with gold, nickel or other metals utilizing outside vendors to perform the plating operation. In the case of hybrids, design engineers formulate the circuit layout designs. Ceramic substrates are then printed with thick film gold conductors to form the interconnect pattern and with thick film resistive inks to form the resistors of the designed circuit. Semiconductor chips, resistor chips, capacitor chips and inductors are then mounted on the substrates and sequential wire bonding is used to interconnect the various components to the printed substrate, as well as to connect the circuit to the package's external pins.

In addition to Company-performed testing and inspection procedures, certain of the Company’s products are subject to source inspections required by customers (including the United States Government). In such cases, designated inspectors are authorized to perform a detailed on-premise inspection of each individual device prior to encapsulation in a casing or before dispatch of the finished unit to ensure that the quality and performance of the product meets the prescribed specifications.

ISO 9001 and AS9100

The Company is certified by NQA to AS 9100:2016 (sometimes previously referred to as AS 9100D) and ISO 9001:2015 standards. The certification is valid until September 2024 and was reissued on October 27, 2022 for the cycle starting September 8, 2021. The AS 9100 certification defines a Quality Management System that is oriented to the aerospace industry. It was released in 1999 by the European Association of Aerospace Industries along with the Society of Automotive Engineers. AS 9100 encompasses ISO 9001 requirements so the certification to AS 9100 standards includes ISO 9001 standards. It is broadly accepted or endorsed as a requirement for aerospace manufacturers among many Solitron customers.

MARKETING AND CUSTOMERS

During the fiscal year ended February 28, 2023, Raytheon Technologies Corporation accounted for approximately 46% of net sales. No other customer accounted for ten percent or more of net sales. During the fiscal year ended February 28, 2022, Raytheon Technologies accounted for 47% of net sales, L3Harris 15% of net sales, USI Electronics 13% of net sales, and Honeywell 11% of net sales. Nine of the Company’s customers accounted for approximately 88% of the Company’s net sales during the fiscal year ended February 28, 2023, as compared to seven customers accounting for 92% of net sales for the fiscal year ended February 28, 2022. It has been the Company’s experience that a large percentage of its sales have been attributable to a relatively small number of customers in any particular period. Due to mergers and acquisitions activity in general, and among large defense contractors in particular, the number of largecustomers will most likely continue to decline in number, but this does not necessarily mean that the Company will experience a decline in sales. As a result, the Company expects customer concentration to continue. The loss of any major customer without offsetting orders from other sources could have a material adverse effect on the business, financial condition and results of operations of the Company. See “Item 1A – Risk Factors” for more information.

Sales to foreign customers accounted for 7% of the Company’s net sales for the fiscal year ended February 28, 2023 as compared to less than 1% of the Company’s net sales for the fiscal year ended February 28, 2022. All sales to foreign customers areconducted utilizing exclusively U.S. dollars. See Note 10 of the financial statements for more information regarding export sales to customers.

BACKLOG

The Company’s order backlog, which consists of semiconductor and hybrid related open orders, was approximately $7,633,000 at February 28, 2023, as compared to $4,464,000 at February 28, 2022. Approximately 78% of the backlog is scheduled for delivery within twelve months. For the years ended February 28, 2023 and February 28, 2022, the entire backlog consisted of orders for electronic components.

The Company’s backlog as of any particular date may not be representative of actual sales for any succeeding period because lead times for the release of purchase orders depend upon the scheduling practices of individual customers. The delivery times of new or non-standard products can be affected by scheduling factors and other manufacturing considerations, variances in the rate of booking new orders from month to month and the possibility of customer changes in delivery schedules or cancellations of orders. Also, delivery times of new or non-standard products are affected by the availability of raw material, scheduling factors, manufacturing considerations and customer delivery requirements.

The rate of booking new orders varies significantly from month to month, mostly as a result of sharp fluctuations in the government budgeting and appropriation process. The Company has historically experienced somewhat decreased levels of bookings during the summer months, primarily as a result of such budgeting and appropriation activities. For these reasons, and because of the possibility of customer changes in delivery schedules or cancellations of orders, the Company’s backlog as of any particular date may not be indicative of actual sales for any succeeding period. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Bookings and Backlog.”

PATENTS AND LICENSES

The Company historically owned 33 patents (all of which have now expired or have been allowed to lapse) relating to the design and manufacture of its products. To date, the expirations or lapses of these patents have not had a material adverse effect on the Company. The Company believes that engineering standards, manufacturing techniques and product reliability are more important to the successful manufacture and sale of its products than the expired or lapsed patents it held.

COMPETITION

The electronic component industry, in general, is highly competitive and has been characterized by price erosion, rapid technological changes and foreign competition. However, in the market segments in which the Company operates, while highly competitive and subject to the same price erosion, technological change has been relatively gradual and minimal. The Company believes that it is well regarded by its customers in the segments of the market in which competition is dependent less on price and more on product reliability, performance and service. Management believes, however, that to the extent the Company’s business is targeted at the military and aerospace markets, where there has been virtually no foreign competition, it is subjected to less competition than manufacturers of commercial electronic components. Additionally, the decline in military orders in programs the Company participates in and the shift in the requirement of the Defense Department whereby the use of Commercial Off The Shelf (“COTS”) components is encouraged over the use of high reliability components that the Company manufactures, prompting the number of competitors to decline, afford the Company the opportunity to increase its market share. In the non-military, non-aerospace markets, the Company is subject to greater price erosion and foreign competition.

The Company has numerous competitors across all of its product lines. The Company is not in direct competition with any other semiconductor manufacturer for an identical mixture of products; however, one or more of the major manufacturers of semiconductors manufacture some of the Company’s products. Other competitors in the military market include Infineon Technologies, Microsemi Corporation, Anaren, Inc., Natel Engineering Company and Sensitron Semiconductor. The Company competes principally on the basis of product quality, turn-around time, customer service and price. The Company believes that competition for sales of products that will ultimately be sold to the United States Government has intensified and will continue to intensify as United States defense spending on high reliability components continues to decrease and the Department of Defense pushes for implementation of its 1995 decision to purchase COTS standard products in lieu of products made in accordance with more stringent military specifications.

The Company believes that its primary competitive advantage is its ability to produce high quality products as a result of its years of experience, its sophisticated technologies and its experienced staff. The Company believes that its ability to produce highly reliable custom hybrids in a short period of time will give it a strategic advantage in attempting to penetrate high-end commercial markets and in selling military products complementary with those currently sold, as doing so would enable the Company to produce products early in design and development cycles.

The Company believes that it will be able to improve its capability to respond more quickly to customer needs and deliver products ahead of schedule.

HUMAN CAPITAL

At February 28, 2023, the Company had 47 employees, 27 of whom were engaged in production activities, 2 in sales and marketing, 6 in executive and administrative capacities and 12 in technical and support activities. Of the 47 employees, 44 were full time employees and 3 were part time employees.

The Company has never had a work stoppage, and none of its employees are represented by a labor organization. The Company considers its employee relations to be good.

SOURCES AND AVAILABILITY OF RAW MATERIAL

The Company purchases its raw materials from multiple suppliers and has a minimum of two suppliers for most of its material requirements. The largest supplier in the fiscal year ended February 28, 2023 was Platronics Seals, representing 21% of total purchases. Other suppliers that represented more than 10% of total purchases were Wuxi Streamtek, which accounted for 16% of total purchases, and Stellar Industries, which accounted for 15% of total purchases. The largest supplier in the fiscal year ended February 28, 2022 was Platronics Seals, representing 25% of total purchases. Other suppliers that represented more than 10% of total purchases were Wuxi Streamtek, which accounted for 22% of total purchases, and Stellar Industries, which accounted for 12% of total purchases. Because of a diminishing number of sources for components and packages in particular, and the increase in the prices of raw silicon semiconductor wafers, precious metals and gold (used in the finish of the packages), the Company has been obliged to pay higher prices, which results in higher costs of goods sold. Most of the packages the Company uses are gold plated, thus they are subject to the volatility and cost fluctuations of gold.

EFFECT OF GOVERNMENT REGULATION

The Company has received DSCC approval to supply its products in accordance with MIL-PRF-19500 and Class H of MIL-PRF-38534. These qualifications are required of vendors to supply to the United States Government or its prime contractors. The Company expects that its continued maintenance of these qualifications will continue to improve its business posture by increasing product marketability. The Company is also certified in accordance with AS9100 which is a core requirement of most defense aerospace contracts. Certain product-specific regulatory and certification requirements and processes are described in more detail under “Item 1 – Business-Products” beginning on page 1.

RESEARCH AND DEVELOPMENT

During the fiscal years ended February 28, 2023 and February 28, 2022, the Company spent $65,000 and $124,000, respectively, of its own funds on research and development. The Company may decide to increase research and development expenditures in the future. The cost of designing custom products has historically been borne in full by the customer, either as a direct charge or is amortized in the unit price charged to the customer.

ENVIRONMENTAL REGULATION

While the Company believes that it has the environmental permits necessary to conduct its business and that its operations conform to current environmental regulations, increased public attention has been focused on the environmental impact of semiconductor manufacturing operations. The Company, in the conduct of its manufacturing operations, has handled and does handle materials that are considered hazardous, toxic or volatile under federal, state and local laws and, therefore, is subject to regulations related to their use, storage, discharge and disposal. No assurance can be made that the risk of accidental release of such materials can be completely eliminated. In the event of a violation of environmental laws, the Company could be held liable for damages and the costs of remediation. In addition, the Company, along with the rest of the semiconductor industry, is subject to variable interpretations and governmental priorities concerning environmental laws and regulations. The annual cost of complying with the regulations is minimal.

Environmental statutes have been interpreted to provide for joint and several liability and strict liability regardless of actual fault. There can be no assurance that the Company and its subsidiaries will not be required to incur costs to comply with, or that the operations, business or financial condition of the Company will not be materially adversely affected by current or future environmental laws or regulations.

AVAILABLE INFORMATION

We maintain a website at www.solitrondevices.com. Information contained on our website is not a part of this Annual Report on Form 10-K and the inclusion of our website address in this report is an inactive textual reference only.

ITEM 1A. RISK FACTORS

The following important business risks and factors, and those business risks and factors described elsewhere in this report or our other Securities and Exchange Commission filings, could cause our actual results to differ materially from those stated in our forward-looking statements, and which could affect the value of an investment in the Company. All references to “we”, “us”, “our” and the like refer to the Company.

Risks Related to our Business and Industry

We are subject to substantial customer concentration, and any loss of, or reduction of business from, one or more of our significant customers could hurt our business by reducing our revenues, profitability and cash flow.

During the fiscal year ended February 28, 2023, five customers accounted for approximately 74% of revenue. During the fiscal year ended February 28, 2022, four customers accounted for approximately 86% of our revenues. The loss or financial failure of any significant customer or distributor, any reduction in orders by any of our significant customers or distributors, or the cancellation of a significant order could materially and adversely affect our business. Furthermore, due to continued industry consolidation, the loss of any one customer or significant order may occur with greater frequency and/or have a greater impact than we anticipate. We cannot guarantee that we will be able to retain long-term relationships or secure renewals of short-term relationships with our more substantial customers in the future.

Our complex manufacturing processes may lower yields and reduce our revenues.

Our manufacturing processes are highly complex, require advanced and costly equipment and are continuously being modified in an effort to improve yields and product performance. Minute impurities or other difficulties in the manufacturing process can lower yields. Our manufacturing efficiency will be an important factor in our future profitability, and we cannot assure you that we will be able to maintain our manufacturing efficiency or increase manufacturing efficiency to the same extent as our competitors.

In addition, as is common in the semiconductor industry, we have from time to time experienced difficulty in effecting transitions to new manufacturing processes. As a consequence, we may suffer delays in product deliveries or reduced yields. We may experience manufacturing problems in achieving acceptable yields or experience product delivery delays in the future as a result of, among other things, capacity constraints, upgrading or expanding our existing facility or changing our process technologies, any of which could result in a loss of future revenues. Our operating results could also be adversely affected by the increase in fixed costs and operating expenses related to increases in production capability if revenues do not increase proportionately.

Our ability to repair and maintain the aging manufacturing equipment we own may adversely affect our ability to deliver products to our customers’ requirements. We may be forced to expend significant funds in order to acquire replacement manufacturing equipment that may not be readily available, thus resulting in manufacturing delays.

Our business could be materially and adversely affected if we are unable to obtain qualified supplies of raw materials, parts and finished components on a timely basis and at a cost-effective price.

The Company relies on its relationships with certain key suppliers for its supply of raw materials, parts and finished components that are qualified for use in the end-products the Company manufactures. While the Company currently has favorable working relationships with its suppliers, it cannot be sure that these relationships will continue in the future. Additionally, the Company cannot guarantee the availability or pricing of raw materials. The price of qualified raw materials can be highly volatile due to several factors, including a general shortage of raw materials, an unexpected increase in the demand for raw materials, disruptions in the suppliers’ business and competitive pressure among suppliers of raw materials to increase the price of raw materials. In particular, the Company has experienced from time to time increases in the prices of raw silicon semiconductor wafers, copper, and precious metals (gold and silver). Suppliers may also choose, from time to time, to extend lead times or limit supplies due to a shortage in supplies. Additionally, some of the Company’s key suppliers of raw materials may have the capability of manufacturing the end products themselves and may therefore cease to supply the Company with its raw materials and compete directly with the Company for the manufacture of the end-products. Any interruption in availability of these qualified raw materials may impair the Company’s ability to manufacture its products on a timely and cost-effective basis. If the Company must identify alternative sources for its qualified raw materials, it would be adversely affected due to the time and process required in order for such alternative raw materials to be qualified for use in the applicable end-products. Any significant price increase in the Company’s raw materials that cannot be passed on to customers or a shortage in the supply of raw materials could have a material adverse effect on the Company’s business, financial condition or results of operations.

If the inflationary pressures in the United States and elsewhere where we operate continue, we could experience reduced margins and lose future business.

While the current inflationary pressures have not materially affected our margins, that could change. Supply chain shortages or delays can further cause problems in our manufacturing and sale of products, including by contributing to pricing pressures experienced by us. To the extent we increase prices in the future to account for increases in operating costs arising from inflation or otherwise, such action could result in reduced demand for our products, and/or customer loss. Similarly, rising labor costs in the U.S. may further tighten margins.

Our inventories may become obsolete and other assets may be subject to risks.

The life cycles of some of our products depend heavily upon the life cycles of the end products into which our products are designed. Products with short life cycles require us to manage closely our production and inventory levels. Inventory may also become obsolete because of adverse changes in end-market demand. We may in the future be adversely affected by obsolete or excess inventories which may result from unanticipated changes in the estimated total demand for our products or the estimated life cycles of the end products into which our products are designed. The asset values determined under Generally Accepted Accounting Principles for inventory and other assets each involve the making of material estimates by us, many of which could be based on mistaken assumptions or judgments.

Environmental regulations could require us to incur significant costs.

In the conduct of our manufacturing operations, we have handled and do handle materials that are considered hazardous, toxic or volatile under federal, state and local laws and, therefore, are subject to regulations related to their use, storage, discharge and disposal. No assurance can be made that the risk of accidental release of such materials can be completely eliminated. In the event of a violation of environmental laws, we could be held liable for damages and the cost of remediation and, along with the rest of the semiconductor industry, we are subject to variable interpretations and governmental priorities concerning environmental laws and regulations. Environmental statutes have been interpreted to provide for joint and several liability and strict liability regardless of actual fault. There can be no assurance that we will not be required to incur costs to comply with, or that our operations, business or financial condition will not be materially affected by, current or future environmental laws or regulations.

Our business is highly competitive and increased competition could reduce gross profit margins and the value of an investment in our Company.

The semiconductor industry, and the semiconductor product markets specifically, are highly competitive. Competition is based on price, product performance, quality, turn-around time, reliability and customer service. The gross profit margins realizable in our markets can differ across regions, depending on the economic strength of end-product markets in those regions. Even in strong markets, price pressures may emerge as competitors attempt to gain more market share by lowering prices, which may in turn force us to lower prices or lose existing business which we may be unable to replace in whole or in part. Competition in the various markets in which we participate comes from companies of various sizes, many of which are larger and have greater financial and other resources than we have and thus can better withstand adverse economic or market conditions. In addition, companies not currently in direct competition with us may introduce competing products in the future.

Our operating results may decrease due to the decline of profitability in the semiconductor industry.

Intense competition and a general slowdown in the demand for military-rated semiconductors worldwide have resulted in decreases in the profitability of many of our products. We expect that profitability for many of our products will continue to decline in the future. A decline in profitability for our products, if not offset by reductions in the costs of manufacturing these products, increased volumes, or increases in the profitability of our other products, would decrease our profits and could have a material adverse effect on our business, financial condition and results of operations.

We may not achieve the intended effects of our business strategy which could adversely impact our business, financial condition and results of operations.

In recognition of the changes in global geopolitical affairs and in United States military spending, we have for a number of years attempted to increase sales of our products for non-military, scientific and industrial niche markets, such as medical electronics, machine tool controls, satellites, telecommunications networks and other market segments in which purchasing decisions are generally based primarily on product quality, long-term reliability and performance, rather than on product price. We are also attempting to offer additional products to the military markets that are complementary to those we currently sell to the military markets. We cannot assure you that these efforts will be successful and, if they are, that they will have the intended effects of increasing profitability. Furthermore, as we attempt to shift our focus to the sale of products having non-military, non-aerospace applications, we will be subject to greater price erosion and foreign competition.

Our inability to introduce new products could result in decreased revenues and loss of market share to competitors; new technologies could also reduce the demand for our products.

Rapidly changing technology and industry standards, along with frequent new product introductions, characterize the semiconductor industry. Our success in these markets depends on our ability to design, develop, manufacture, assemble, test, market and support new products and enhancements on a timely and cost-effective basis. There can be no assurance that we will successfully identify new product opportunities and develop and bring new products to market in a timely and cost-effective manner or those products or technologies developed by others will not render our products or technologies obsolete or noncompetitive. A fundamental shift in technology in our product markets could have a material adverse effect on us. Changes in technology may reduce the demand for the products we offer. For example, new or developing technologies could displace the military or aerospace equipment and activities to which our product offerings relate, and improvements in existing technology may allow competitors to enhance their products, or produce them in a more cost-effective manner and in turn pose a threat to our market share. Alternatively, our customers could perform more manufacturing processes internally, including due to acquisitions with others in our or their industry, which would cause our business to suffer. In light of the fact that many of our competitors have substantially greater revenues than us and that we have not spent significant funds on research and development in recent years, we may not be able to accomplish the foregoing, which might have a material adverse effect on the Company, our business, prospects, financial condition or results of operations.

The nature of our products exposes us to potentially significant product liability risk.

Our business exposes us to potential product liability risks that are inherent in the manufacturing and marketing of high-reliability electronic components for critical applications. No assurance can be made that our product liability insurance coverage is adequate or that present coverage will continue to be available at acceptable costs, or that a product liability claim would not materially and adversely affect our business, prospects, financial condition or results of operations.

We depend on the recruitment and retention of qualified personnel and our failure to attract and retain such personnel could seriously harm our business.

Due to the specialized nature of our business, our future performance is highly dependent on the continued services of our key engineering personnel and executive officers. Our prospects depend on our ability to attract and retain qualified engineering, manufacturing, marketing, sales and management personnel for our operations as well as conduct appropriate succession planning for our executive officers. Competition for personnel is intense, and we may not be successful in attracting or retaining qualified personnel. Our failure to compete for these personnel could seriously harm our business, prospects, results of operations and financial condition.

Failure to protect our proprietary technologies or maintain the right to use certain technologies may negatively affect our ability to compete.

We rely heavily on our proprietary technologies. Our future success and competitive position may depend in part upon our ability to obtain or maintain protection of certain proprietary technologies used in our principal products. We do not have patent protection on any aspects of our technology. Our reliance upon protection of some of our technology as “trade secrets” will not necessarily protect us from the use by other persons of our technology, or their use of technology that is similar or superior to that which is embodied in our trade secrets. Others may be able to independently duplicate or exceed our technology in whole or in part, or otherwise gain access to proprietary aspects of our products and processes, notwithstanding our efforts to protect these aspects of our business. We may not be successful in maintaining the confidentiality of our technology, dissemination of which could have material adverse effects on our business. In addition, litigation may be necessary to determine the scope and validity of our proprietary rights.

Obtaining or protecting our proprietary rights may require us to defend claims of intellectual property infringement by our competitors. We could become subject to lawsuits in which it is alleged that we have infringed or are infringing upon the intellectual property rights of others with or without our prior awareness of the existence of those third-party rights, if any.

If any infringements, real or imagined, exist, arise or are claimed in the future, we may be exposed to substantial liability for damages and may need to obtain licenses from the patent owners, discontinue or change our processes or products or expend significant resources to develop or acquire non-infringing technologies. We may not be successful in such efforts or such licenses may not be available under reasonable terms. Our failure to develop or acquire non-infringing technologies or to obtain licenses on acceptable terms or the occurrence of related litigation itself could have material adverse effects on our operating results, financial condition and cash flows.

We cannot guarantee that we will have sufficient capital resources to make necessary investments in manufacturing technology and equipment.

The semiconductor industry is capital intensive. Semiconductor manufacturing requires a regular upgrading of process technology to remain competitive, as new and enhanced semiconductor processes are developed which permit smaller, more efficient and more powerful semiconductor devices. We maintain certain of our own manufacturing, assembly and test facilities, which have required and will continue to require significant investments in manufacturing technology and equipment, especially for new technologies we develop. We are also attempting to add the appropriate level and mix of capacity to meet our customers' future demand. There can be no assurance that we will have sufficient capital resources to make necessary investments in manufacturing technology and equipment. Although we believe that anticipated cash flows from operations and existing cash reserves will be sufficient to satisfy our future capital expenditure requirements, we cannot guarantee that this will be the case or that alternative sources of capital or credit will be available to us on favorable terms or at all.

We may make substantial investments in plant and equipment that may become impaired.

Some of our investments in plant and equipment support particular technologies, processes or products, and may not be applicable to other or newer technologies, processes or products. Also, the ability to relocate and qualify equipment for our operations, whether within our Company or to and from third party contractors could be time consuming and costly. To the extent we invest in more equipment, or a mix of equipment, than we can use efficiently, experience low plant or equipment utilization due to reduced demand or adverse market conditions, our plant or equipment becomes older or outmoded, or we are not able to efficiently recover and/or utilize equipment on loan at third party contractors, we may incur significant costs or impairment charges that could materially adversely affect our results of operation and financial condition.

While we attempt to monitor the credit worthiness of our customers, we may be at risk due to the adverse financial condition of one or more customers.

We have established procedures for the review and monitoring of the credit worthiness of our customers and/or significant amounts owing from customers. Despite our monitoring and procedures, especially in the current macroeconomic situation, we may find that, despite our efforts, one or more of our customers become insolvent or face bankruptcy proceedings. Such events could have an adverse effect on our operating results if our receivables applicable to that customer become uncollectible in whole or in part, or if our customers' financial situation result in reductions in whole or in part of our ability to continue to sell our products or services to such customers at the same levels or at all.

Our international operations expose us to material risks, including risks under U.S. export laws.

Our revenue from foreign sources increased substantially from fiscal 2023 to fiscal 2022. We expect revenues from foreign markets to continue to represent a portion of total revenues, which may continue to be substantial or higher in future periods as we attempt to diversify our business and seek new sources of revenue. Among others, these risks include: changes in, or impositions of, legislative or regulatory requirements, including tax laws in the United States and in the countries in which we manufacture or sell our products; trade restrictions; transportation delays; work stoppages; economic and political instability; crime; kidnapping; war; terrorism; and fluctuating foreign currency and prices and exchange rates. Additionally, in certain jurisdictions where we use third party contractors, the legal systems do not provide effective remedies to us when the contractor has breached its obligation or otherwise fails to perform.

In addition, it is more difficult in some foreign countries to protect our products or intellectual property rights to the same extent as is possible in the United States. Therefore, the risk of piracy or misuse of our technology and product may be greater in these foreign countries. Although we have not experienced any material adverse effect on our operating results as a result of these and other factors, such factors could have a material adverse effect on our financial condition and operating results in the future.

If we fail to comply with anti-bribery, anti-corruption, anti-money laundering laws, and similar laws, or allegations of such failure, it could have a material adverse effect on our business, financial condition and operating results.

We are subject to various anti-bribery, anti-corruption, anti-money laundering laws, including the U.S. Foreign Corrupt Practices Act of 1977 (the “FCPA”), the U.S. Travel Act, and the USA PATRIOT Act. In addition, to the extent we operate or do business in foreign jurisdictions, we are or may become subject to similar or corresponding laws and regulations in those jurisdictions. Anti-corruption and anti-bribery laws have been enforced aggressively in recent years and are interpreted broadly to generally prohibit companies, their employees, agents, representatives, business partners, and third-party intermediaries from authorizing, offering, or providing, directly or indirectly, improper payments or benefits to recipients in the public or private sector.

We, our employees, agents, representatives, business partners and third-party intermediaries may have direct or indirect interactions with officials and employees of government agencies or state-owned or affiliated entities and may be held liable for the corrupt or other illegal activities of these employees, agents, representatives, business partners or third-party intermediaries even if we do not explicitly authorize such activities.

These laws also require that we keep accurate records and maintain internal controls and compliance procedures designed to prevent any such actions. While we have policies and procedures to address compliance with such laws, we cannot assure you that none of our employees, agents, representatives, business partners or third-party intermediaries will take actions in violation of our policies and applicable law, for which we may be ultimately held responsible. In addition, we may be held liable for violations committed of the FCPA or similar foreign laws by companies that we acquire.

Any alleged or actual violation of the FCPA or other applicable anti-bribery, anti-corruption laws, and anti-money laundering laws could result in whistleblower complaints, investigations, enforcement actions, fines and other criminal or civil sanctions, adverse media coverage, loss of export privileges, or suspension or termination of government contracts. Responding to any investigation or enforcement action would require significant attention of our management and resources, including significant defense costs and other professional fees. Failure to comply with anti-bribery, anti-corruption, anti-money laundering laws, and similar laws, or allegations of such failure, could therefore have a material adverse effect on our business, results of operations, financial condition and future prospects.

Compliance with regulations regarding the use of "conflict minerals" could limit the supply and increase the cost of certain metals used in manufacturing our products.

Pursuant to Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, the Securities and Exchange Commission (the “SEC”) promulgated disclosure rules for manufacturers of products containing certain minerals which are mined from the Democratic Republic of Congo and adjoining countries.  These "conflict minerals" are commonly found in metals used in the manufacture of semiconductors.  Manufacturers are also required to disclose their efforts to prevent the sourcing of such minerals and metals produced from them.  While certain aspects of these rules continue to be litigated and a ruling by the Federal Court of Appeals for the D.C. Circuit has led to further uncertainty regarding the SEC’s enforcement of the rule, the disclosure rules, as modified by the ruling, went into effect in 2014.  The implementation of these regulations may limit the sourcing and availability of some of the metals used in the manufacture of our products.  The regulations may also reduce the number of suppliers who provide conflict-free metals and may affect our ability to obtain products in sufficient quantities or at competitive prices.  Finally, some of our customers may elect to disqualify us as a supplier if we are unable to verify that the metals used in our products are free of conflict minerals.

Risks Related to Government Contracts and Policies

We are dependent on government contracts, which are subject to termination, price renegotiations and regulatory compliance, which can increase the cost of doing business and negatively impact our revenues.

All of our contracts with the United States Government and its prime contractors contain customary provisions permitting termination at any time at the convenience of the United States Government or its prime contractors upon payment to us for costs incurred plus a reasonable profit. Certain contracts are also subject to price renegotiations in accordance with United States Government sole source procurement provisions. Nevertheless, we cannot assure you that the foregoing government contracting risks will not materially and adversely affect our business, prospects, financial condition or results of operations. Furthermore, we cannot assure you that we would be able to procure new government contracts to offset any revenue losses incurred due to early termination or price renegotiation of existing government contracts.

Our government business is also subject to specific procurement regulations, which increase our performance and compliance costs. These costs might increase in the future, reducing our margins. Failure to comply with procurement regulations could lead to suspension or debarment, for cause, from government subcontracting for a period of time. Among the causes for debarment are violations of various statutes, including those related to procurement integrity, export control, government security regulations, employment practices, protection of the environment, and accuracy of records. The termination of a government contract or relationship as a result of any of these violations would have a negative impact on our reputation and operations, and could negatively impact our ability to obtain future government contracts.

Changes in government policy or economic conditions could negatively impact our results.

A large portion of the Company’s sales are to military and aerospace markets which are subject to the business risk of changes in governmental appropriations and changes in national defense policies and priorities.

Our results may also be affected by changes in trade, monetary and fiscal policies, laws and regulations, or other activities of U.S. and non-U.S. governments, agencies and similar organizations. Furthermore, our business, prospects, financial condition and results of operations may be adversely affected by the shift in the requirement of the United States Department of Defense policy toward the use of standard industrial components over the use of high reliability components that we manufacture. Our results may also be affected by social and economic conditions, which impact our sales, including in markets subject to ongoing political hostilities, such as regions of the Middle East.

Changes in Defense related programs and priorities could reduce the revenues and profitability of our business.

We depend on the U.S. government and its suppliers for a substantial portion of our business, and changes in government defense spending and priorities could have consequences on our financial position, results of operations and business. U.S. government contracts are subject to uncertain levels of funding and timing, as well as termination. The funding of U.S. government programs is subject to congressional appropriations, which are made on a fiscal year basis even for multi-year programs. Consequently, programs are often only partially funded initially and may not continue to be funded in future years. We may also experience significant changes in our operating profit margins as a result of variations in sales, changes in product mix, price competition for orders and costs associated with the introduction of new products.

The U.S. federal government is presently in discussions regarding increasing its debt ceiling, and is constantly evaluating its budget in general, either of which could result in the adoption of changes in current government spending programs, trends or practices in a manner which adversely affects us or our customers or industry. For example, in recent years the U.S. has experienced an increased focus among policymakers and other stakeholders towards climate change and other environmental/social/governance, or “ESG,” initiatives and away from traditionally more highly prioritized budgetary items such as military and defense programs. If the U.S. federal government elects to reduce spending on programs on which our business depends, our business, and your investment in us, could be materially adversely affected.

General Risks

Because of the Russian invasion of Ukraine, as well as high inflation and increased Federal Reserve interest rates in response, the effect on the capital markets and the economy is uncertain, and we may have to deal with a recessionary economy and economic uncertainty including possible adverse effects upon our business and industry.

As a result of the Russian invasion of Ukraine, certain events are beginning to affect the global and United States economy including continued inflation, Federal Reserve interest rate increases in response, prominent bank failures and weaknesses, substantial increases in the prices of various raw materials, goods and services, declines in the capital markets, and large Western companies ceasing to do business in Russia. While this has initially caused increased defense spending by the United States and other countries, the extent and duration of these events and their impact are at best uncertain, and continuation may result in adverse consequences to us, third parties on which we rely, our industry or the economy in general. The U.S. economy may experience a recession with uncertain and potentially severe impacts upon public companies and us. We cannot predict how this will affect the market for solid‑state semiconductor components and related devices, but the impact may be adverse. For example, if our customers are no longer able to pay us on existing contracts or are unwilling or unable to enter into new contracts for our products due to an economic downturn, our operating results would materially adversely impacted.

Security breaches and other disruptions could compromise the integrity of our information and expose us to liability, which would cause our business and reputation to suffer.

We routinely collect and store sensitive data, including intellectual property and other proprietary information about our business and that of our customers, suppliers and business partners. The secure processing, maintenance and transmission of this information is critical to our operations and business strategy. Despite our security measures, our information technology and infrastructure may be vulnerable to attacks by hackers or breached due to employee error, malfeasance or other disruptions. Any such breach could compromise our networks and the information stored there could be accessed, publicly disclosed, lost or stolen. Any such access, disclosure or other loss of information could result in legal claims or proceedings and liability under laws that protect the privacy of personal information. It could also result in regulatory penalties, disrupt our operations and the services we provide to customers, damage our reputation and cause a loss of confidence in our products and services, which could adversely affect our business/operating margins, revenues and competitive position.

Our failure to remediate the material weaknesses in our internal control over financial reporting or our identification of any other material weaknesses in the future may adversely affect the accuracy and timing of our financial reporting.

We are responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rule 13a-15(f) and Rule 15d-15(f) under the Securities Exchange Act of 1934 (the “Exchange Act”).  A material weakness is defined as a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the Company’s annual or interim financial statements will not be prevented or detected on a timely basis.  

We have implemented remediation measures and we are in the process of identifying any additional appropriate remediation measures. There is the potential that our remediation efforts may not be successful. Until our remediation plan is fully implemented, our management will continue to devote significant time and attention to these efforts. If we fail to complete our remediation plan in a timely fashion, or at all, or if our remediation plan is inadequate or we encounter difficulties in the implementation or maintenance of our internal control over financial reporting or disclosure controls and procedures, there will continue to be an increased risk that we will be unable to timely file future periodic reports with the SEC. In addition, any failure to implement our remediation plan or any difficulties we encounter with our remediation plan could result in additional material weaknesses or deficiencies in our internal control or future material misstatements in our annual or interim financial statements. Further, if any other material weakness or deficiency in our internal control over financial reporting exists and goes undetected, our financial statements could contain material misstatements that, when discovered in the future, could cause us to fail to meet our future reporting obligations. Moreover, our failure to remediate the material weaknesses identified in this Form 10-K or the identification of additional material weaknesses, could adversely affect our stock price and investor confidence.

Natural disasters, like hurricanes, or occurrences of other natural disasters whether on our production facility, in the United States or internationally may affect the markets in which our common stock trades, the markets in which we operate and our profitability.

Natural disasters, like those related to hurricanes, or threats or occurrences of other similar events, whether in the United States or internationally, may affect the markets in which we operate and our profitability. Hurricanes have affected us in the past, and may continue to affect us in the future, resulting in damage to our manufacturing facility in South Florida and our manufacturing equipment, office closures and impairing our ability to produce and deliver our products. All of our manufacturing capabilities are focused on our single facility in West Palm Beach, and any permanent or prolonged damage or cessation, suspension or decline in production that could result from any of the foregoing or other adverse events with respect to our facility would materially adversely affect us. Such events could also affect our domestic and international sales, disrupt our supply chains, primarily for raw materials and process chemicals and gases, affect the physical facilities of our suppliers or customers, and make transportation of our supplies and products more difficult or cost prohibitive. Due to the broad and uncertain effects that natural events have had on financial and economic markets and stock exchanges and market quotation systems generally, we cannot provide any estimate of how these activities might affect our future results.

Risks Relating to our Common Stock

The price of our common stock has fluctuated widely in the past and may fluctuate widely in the future.

Our common stock, which is traded on the over-the-counter bulletin board, has experienced and may continue to experience significant price and volume fluctuations that could adversely affect the market price of our common stock without regard to our operating performance. In addition, we believe that factors such as quarterly fluctuations in financial results, financial performance and other activities of other publicly traded companies in the semiconductor industry could cause the price of our common stock to fluctuate substantially. In addition, in recent periods, our common stock, the stock market in general and the market for shares of semiconductor industry-related stocks in particular have experienced extreme price fluctuations which have often been unrelated to the operating performance of the affected companies. Any similar fluctuations in the future could adversely affect the market price of our common stock.

There is currently a limited trading market for the Company’s common stock.

Our common stock is quoted on the OTC Pink Market under the symbol “SODI.” However, there is currently a limited trading market in our common stock which trades on a limited basis, and we cannot give any assurance that a consistent, active trading market will develop. In general, the OTC Pink Market is relatively illiquid. Even if an active market for our common stock develops, there can be no assurance that such market will be maintained. The lack of an active market may impair your ability to sell your shares at the time you wish to sell them or at a price that you consider reasonable.

We cannot guarantee that we will declare future cash dividend payments, nor repurchase any shares of our common stock pursuant to our stock repurchase program.

We do not have an annual dividend policy in place. We have not declared and paid a cash dividend since June 29, 2015. Our Board of Directors has authorized a repurchase program under which the Company may repurchase up to $1,000,000 of the Company's common stock. The Company did not repurchase any shares of common stock in fiscal 2023. In fiscal 2022 the company repurchased 16 shares of common stock. Any determination to pay cash dividends or repurchase shares of the Company’s common stock in the future is contingent on a variety of factors, including our financial condition, results of operations, business requirements, and our Board of Directors' determination that such dividends or stock repurchases are in the best interests of our stockholders and in compliance with all applicable laws and agreements. Accordingly, there is no assurance that we will pay cash dividends or repurchase stock pursuant to our stock repurchase program, or that any declaration of cash dividends or stock repurchases under our stock repurchase program will have a beneficial impact on our stock price.

Provisions in our charter documents could make it more difficult to acquire our Company and may reduce the market price of our stock.

Our Certificate of Incorporation and Bylaws contain certain provisions, each of which could delay or prevent a change in control of our company or the removal of management. These corporate provisions could also deter potential acquirers from making an offer to our stockholders and limit any opportunity to realize premiums over prevailing market prices of our common stock.

ITEM 1B. UNRESOLVED STAFF COMMENTS.

None

ITEM 2. PROPERTIES.

The Company’s corporate headquarters and manufacturing operations are located in a purchased facility in West Palm Beach, Florida. The facility is approximately 24,000 sq. ft. The Company completed its move into the new facility in fiscal 2023. The Company believes that its facility in West Palm Beach is suitable and adequate to meet its requirements.

ITEM 3. LEGAL PROCEEDINGS.

We may from time to time become a party to various legal proceedings arising in the ordinary course of business. As of February 28, 2023, we had no known material current, pending, or threatened litigation.

ITEM 4. MINE SAFETY DISCLOSURES.

Not applicable.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

The Company’s Common Stock trades on the OTC Pink Tier of the OTC Markets under the symbol “SODI”.

As of February 28, 2023, there were approximately 569 holders of record of the Company’s Common Stock. On June 21, 2023, the last sale price of the Common Stock as reported on the OTC Pink was $10.79 per share.

The following table sets forth for the periods indicated, high and low sales prices of the Common Stock as reported by the OTC Pink.

We have no current plans to pay dividends. We plan on reinvesting our earnings, if any, for use in the business, for acquisitions, or for share repurchases.

The Company currently has a repurchase program under which the Company may repurchase up to $1,000,000 of its outstanding common stock without an expiration date to the repurchase program. Under the current repurchase program, repurchases may be made by the Company from time to time in the open market or through privately negotiated transactions depending on market conditions, stock price, corporate and regulatory requirements, and other factors. The Company did not repurchase shares of common stock during fiscal 2023 under the program and repurchased 16 shares during fiscal 2022. During fiscal 2022 the Company was also notified by its transfer agent of a 10 share adjustment that reduced the number of outstanding shares of common stock.

Securities Issued Under Equity Compensation Plan

No shares were issued in fiscal 2023 or fiscal 2022.

ITEM 6. [RESERVED]

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

You should read the following discussion in conjunction with the “Financial Statements and Supplementary Data” section of this Annual Report on Form 10-K. You also should review and consider the risks relating to the Company’s business, operations, financial performance, and cash flows presented earlier under “Risk Factors.”

INTRODUCTION

The Company designs, develops, manufactures and markets solid-state semiconductor components and related devices primarily for the military and aerospace markets. The Company manufactures a large variety of bipolar and MOS power transistors, power and control hybrids, junction and power MOFSETs, field effect transistors and other related products. Most of the Company’s products are custom made pursuant to contracts with customers whose end products are sold to the United States government. Other products, such as JAN transistors, diodes and SMD voltage regulators, are sold as standard or catalog items.

The following table is included solely for use in comparative analysis to complement Management’s Discussion and Analysis of Financial Condition and Results of Operations:

The following table sets forth our statements of operations for the fiscal year periods indicated (in 000’s):

The following table sets forth our statements of operations as a percentage of total revenue for the periods indicated: 

TRENDS AND UNCERTAINTIES:

During the fiscal year ended February 28, 2023, the Company’s book-to-bill ratio was approximately 1.49 to 1 as compared to approximately 0.63 to 1 for the fiscal year ended February 28, 2022, reflecting an increase in the volume of orders booked. Historically, the Company has experienced seasonality in its bookings, with the fiscal fourth quarter experiencing the highest level of bookings. Going forward we expect more variability in bookings.

The Company has been seeking out additional revenue sources, which may involve new products and/or products the Company has not manufactured in recent years, or before. The Company may incur difficulty manufacturing those products, which could result in decreased margins.

RESULTS OF OPERATIONS

Comparison of Fiscal Year Ended February 28, 2023 vs. Fiscal Year Ended February 28, 2022

Revenue. Net sales for the fiscal year ended February 28, 2023 decreased by approximately 48% to $6,406,000 versus $12,284,000 for the fiscal year ended February 28, 2022. The decrease was primarily attributable to the Company accelerating shipments in fiscal 2022, when possible, prior to relocating into its new facilities in fiscal 2023. The relocation resulted in minimal shipments in the fiscal 2023 third quarter.

Net bookings for the fiscal year ended February 28, 2023 were approximately 49% more than net sales. Backlog increased by approximately 71% to $7,633,000 as of February 28, 2023 from $4,464,000 as of February 28, 2022. The increase was due to increased order activity by our customers and reduced shipments by the Company related to suspending production while relocating its facility. We believe that overall increase in fiscal 2023 bookings was related to reduced COVID-19 impacts on our customers. For most of fiscal 2023 our sales team had a limited ability to make onsite sales visits due to COVID-19as compared to no ability to make onsite sales visits due to COVID-19 in fiscal 2022. We expect continued normalized sales activity in fiscal 2024.

During the fiscal year ended February 28, 2023, the Company shipped 52,924 units as compared with 108,176 units shipped during the fiscal year ended February 28, 2022 primarily due to reduced shipments by the Company related to suspended production while relocating its facilities. It should be noted that since the Company manufactures a wide variety of products with an average sales price ranging from a few dollars to several hundred dollars, such periodic variations in the Company’s volume of units shipped might not be a reliable indicator of the Company’s performance.

Cost of Sales. Cost of sales for the fiscal year ended February 28, 2023 decreased to $5,005,000 from $7,485,000 for the fiscal year ended February 28, 2022. Expressed as a percentage of sales, cost of sales increased to 78% for the fiscal year ended February 28, 2023 as compared to 61% for the fiscal year ended February 28, 2022.

Gross Profit. Gross profit for the fiscal year ended February 28, 2023 decreased to $1,401,000 from $4,799,000 for the fiscal year ended February 28, 2022 due primarily to decreased net sales and productivity. Expressed as a percentage of sales, gross profit for the fiscal year ended February 28, 2023 decreased to 22% as compared to 39% for the fiscal year ended February 28, 2022.

Selling, General & Administrative Expenses. During the fiscal year ended February 28, 2023, selling, general and administrative expenses, as a percentage of sales, increased to approximately 32% as compared to 20% for the year ended February 28, 2022. In terms of dollars, selling, general and administrative expenses decreased 18% to $2,052,000 for the fiscal year ended February 28, 2023 from $2,507,000 for the fiscal year ended February 28, 2022. This decrease is primarily due to a decrease in selling and marketing costs of $180,000 due to decreased net sales, and decreased bonuses of $227,000.

Operating Income. Operating loss for the fiscal year ended February 28, 2023 was ($651,000) as compared to an operating income of $2,292,000 for the fiscal year ended February 28, 2022. The decrease in operating income was mainly attributable to the decrease in net sales.

Total Other Income. Interest income and dividend income were $36,000 and $31,000, respectively for the fiscal year ended February 28, 2023, compared to $0 and $5,000, respectively for the fiscal year ended February 28, 2022. Interest expense was ($108,000) for the fiscal year ended February 28, 2023, compared to ($103,000) for the fiscal year ended February 28, 2022. The increased expense was primarily due to a full year of interest on the mortgage loan on the new building purchased in fiscal 2022. Realized gains (losses) on investments for the fiscal year ended February 28, 2023 were ($18,000) compared to gains of $68,000 for the fiscal year ended February 28, 2022. Unrealized gains on investments for the fiscal year ended February 28, 2023 increased to $886,000 from a loss ($24,000) for the fiscal year ended February 28, 2022. Gain on PPP loan forgiveness in the fiscal year ended February 28, 2023 was $0 as compared to $812,000 in the fiscal year ended February 28, 2022. Scrap income was $650,000 in the fiscal year ended February 28, 2023 as compared to $441,000 in the fiscal year ended February 28, 2022. Other income was $0 in the fiscal year ended February 28, 2023 as compared to $17,000 in the fiscal year ended February 28, 2022.

Net Income. Net income for the fiscal year ended February 28, 2023 was $826,000 as compared to net income of $3,508,000 for the fiscal year ended February 28, 2022. The decrease in net income was mainly attributable to the decrease in net sales.

LIQUIDITY AND CAPITAL RESOURCES

Operating Activities:

Net cash provided (used in) by operating activities was $953,000 for the year ended February 28, 2023 primarily reflecting net income of $826,000, a decrease in accounts receivable of $807,000, and depreciation of $363,000 partially offset by net realized and unrealized gains of $868,000 and an increase in inventories of $155,000.

Net cash provided by (used in) operating activities was $3,334,000 for the year ended February 28, 2022 primarily reflecting net income of $3,508,000, a decrease in inventories of $461,000, and depreciation of $264,000 partially offset by a gain on PPP loan forgiveness of $812,000 and an increase in accounts receivable of $285,000.

Investing Activities:

Net cash provided by (used in) investing activities was ($3,491,000) for the year ended February 28, 2023 principally reflecting ($2,494,000) in purchases of short-term investment, ($2,188,000) in purchases of property and equipment, and ($1,313,000) in purchases of marketable securities, partially offset by $1,533,000 in maturities of short-term investments and $971,000 from proceeds from the sale of marketable securities.

Net cash provided by (used in) investing activities was ($5,889,000) for the year ended February 28, 2022 principally reflecting ($4,890,000) in purchases of property and equipment, ($660,000) in purchases of marketable securities, and ($609,000) in expenditures on construction in progress, partially offset by $270,000 from proceeds from the sale of marketable securities.

Financing Activities:

Net cash provided by (used in) financing activities was ($103,000) for the year ended February 28, 2023, reflecting ($103,000) in principal payments on the mortgage loan.

Net cash provided by (used in) financing activities was $2,858,000 for the year ended February 28, 2022, reflecting proceeds from mortgage loan of $2,940,000, partially offset by ($82,000) in principal payments on the mortgage loan.

We expect our sole source of liquidity over the next twelve months to be cash from operations and cash and cash equivalents, if necessary. We anticipate that our capital expenditures required during the next twelve months to sustain operations will be approximately $0.3 million and will be funded from operations and cash and cash equivalents, if necessary.

At February 28, 2023 and February 28, 2022, the Company had cash and cash equivalents of approximately $1,447,000 and $4,088,000, respectively. The cash decrease for the year ended February 28, 2023 was primarily due to purchases of property and equipment and short-term investments, partially offset by cash from operating activities and maturities of short-term investments.

At February 28, 2023 and February 28, 2022, the Company had short-term investments of approximately $986,000 and $0, respectively.

At February 28, 2023 and February 28, 2022, the Company had investments in securities of approximately $1,895,000 and $684,000, respectively.

At February 28, 2023, the Company had working capital of $6,541,000 as compared with working capital at February 28, 2022 of $7,660,000. The decrease for the year ended February 28, 2023 was due primarily to purchases of property and equipment.

The Company has approximately $1,620,000 in cash and equivalents on hand as of May 31, 2023 plus $1 million of Treasury bills that mature on August 10, 2023. Management estimates this amount will be sufficient to fund the Company’s operations and working capital requirements for the next twelve months.

Stock Repurchase Program:

On January 15, 2016, the Board of Directors amended the Company’s previously authorized stock repurchase program to permit the Company to acquire up to $1,000,000 of its outstanding common stock from time to time, increasing the Company’s authorization from the $720,000 remaining at that time and eliminating the expiration date of February 29, 2016. Purchases under the amended stock repurchase program may be made through the open market or privately negotiated transactions as determined by the Company’s management, and in accordance with the requirements of the Securities and Exchange Commission. The timing and actual number of shares repurchased will depend on a variety of factors including price, corporate and regulatory requirements and other conditions.

The Company did not repurchase any shares during the fiscal year ended February 28, 2023. The Company repurchased 16 shares for $145.50, or $9.09 per share, under the stock repurchase program during the fiscal year ended February 28, 2022.

The Company was notified by its transfer agent of a 10 share reduction to outstanding shares during the fiscal year ended February 28, 2022.

CRITICAL ACCOUNTING POLICIES:

See Note 2 in the financial statements for the Company’s significant accounting policies. Of the Company’s accounting policies, the following are considered to be critical – Revenue Recognition and Inventories.

OFF-BALANCE SHEET ARRANGEMENTS

The Company has not engaged in any off-balance sheet arrangements.

BOOKINGS AND BACKLOG

During the fiscal year ended February 28, 2023, the Company’s net bookings were $9,572,000 in new orders as compared with $7,719,000 for the year ended February 28, 2022, reflecting an increase in bookings of approximately 24%. TheCompany’sbacklog increased to $7,633,000 at February 28, 2023 as compared with $4,464,000 as of February 28, 2022, reflecting an increase of approximately 71% in backlog.

In the event that bookings in the long-term decline significantly below the level experienced in the last fiscal year, the Company may be required to implement cost-cutting or other downsizing measures to continue its business operations. Such cost-cutting measures could inhibit future growth prospects. For the years ended February 28, 2023 and February 28, 2022, the entire backlog consisted of orders for electronic components.

See Part I, Item 1, “Business – Marketing and Customers” and “Backlog.”

FUTURE PLANS

The Company plans to continue its efforts in selling commercial semiconductors and power modules and to develop appropriate strategic alliance arrangements. If these plans are successful, the Company intends to aggressively pursue sales of these products which could require the Company to invest in the building up of inventories of finished goods and invest in capital equipment (assembly and test) to replace older generation equipment and to support new product manufacturing. Any financing necessary to fund these initiatives could come from equipment leasing, among other financing alternatives. Despite its intentions, the Company cannot assure you that any of the above-described plans will be successful in increasing liquidity, reducing costs or improving sales.

Based on various factors, including the Company’s desire to fully utilize its current net operating loss carryforwards, the Company may explore certain transactions or actions, including acquisitions, additional product lines, and/or investing a portion of its cash into common stocks or higher yielding debt instruments. The Company will continue to consider additional share repurchases under the Company's stock repurchase program in light of market conditions and the Company's liquidity needs and capital commitments.

INFLATION

The rate of inflation has not had a material effect on the Company’s revenues and costs and expenses, and it is not anticipated that inflation will have a material effect on the Company in the near future. However, to the extent the Federal Reserve’s interest rate increases or other factors cause a recession, such an event could adversely affect us.

SEASONALITY

The Company’s bookings of new orders and sales are largely dependent on congressional budgeting and appropriation activities and the cycles associated therewith. The Company has historically experienced a decreased level of bookings during the summer months as a result of a slowdown in the level of budgeting and appropriation activities.

FORWARD-LOOKING STATEMENTS

Some of the statements in this Annual Report on Form 10-K are “forward-looking statements”. These forward-looking statements include statements regarding our business, financial condition, results of operations, strategies or prospects. You can identify forward-looking statements by the fact that these statements do not relate strictly to historical or current matters. Rather, forward-looking statements relate to anticipated or expected events, activities, trends or results. Because forward-looking statements relate to matters that have not yet occurred, these statements are inherently subject to risks and uncertainties. Many factors could cause our actual activities or results to differ materially from the activities and results anticipated in forward-looking statements. These factors include those described under the caption “Risk Factors” in this Annual Report on Form 10-K, including those identified below. We do not undertake any obligation to update forward-looking statements, except as required by law.

Some of the factors that may impact our business, financial condition, results of operations, strategies or prospects include:

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

Disclosure under this item is not required as the registrant is a smaller reporting company.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.

Index to Financial Statements

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Shareholders and Board of Directors of

Solitron Devices, Inc.

Opinion on the Financial Statements

We have audited the accompanying balance sheets of Solitron Devices, Inc. (the “Company”) as of February 28, 2023 and 2022, and the related statements of operations, stockholders’ equity, and cash flows for the years then ended, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of February 28, 2023 and 2022, and the results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) ("PCAOB") and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

Critical audit matters are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. We determined that there are no critical audit matters.

/s/ MaloneBailey, LLP

www.malonebailey.com

We have served as the Company's auditor since 2020.

Houston, Texas

June 23, 2023

The accompanying notes are an integral part of the financial statements.

The accompanying notes are an integral part of the financial statements.

The accompanying notes are an integral part of the financial statements.

The accompanying notes are an integral part of the financial statements.

SOLITRON DEVICES, INC.

NOTES TO FINANCIAL STATEMENTS

1. BUSINESS DESCRIPTION

Nature of Operations and Activities

Solitron Devices, Inc., a Delaware corporation (the “Company” or “Solitron”), designs, develops, manufactures, and markets solid-state semiconductor components and related devices primarily for the military and aerospace markets. The Company was incorporated under the laws of the State of New York in 1959 and reincorporated under the laws of the State of Delaware in August 1987.

2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Basis of Presentation

The financial statements have been prepared on the accrual basis of accounting in conformity with accounting principles generally accepted in the United States of America.

Use of estimates

The financial statements are prepared in accordance with U.S. GAAP. Preparation of these financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, costs and expenses and related disclosures. The Company bases its estimates on historical experience and on various other assumptions that it believes to be reasonable. The Company could have reasonably used different accounting estimates. This applies in particular to inventory and valuation allowance for deferred tax assets. Actual results could differ significantly from our estimates. To the extent that there are material differences between these estimates and actual results, the Company’s future financial statement presentation, financial condition, results of operations and cash flows will be affected. The Company believes COVID-19 had a negative impact on the Company’s bookings in fiscal 2022, and bookings and net sales in fiscal 2023. The Company expects a negative impact to net sales in the first half of fiscal 2024 due to COVID-19 based on bookings being negatively affected in fiscal 2023.

Cash and Cash Equivalents

Cash and cash equivalents include demand deposits and money market accounts. The Company considers any short-term, highly liquid investments with maturities of three months or less as cash and cash equivalents.

Short-term Held-to-Maturity Investments

Short-term investments consist of certificates of deposit and U.S. Treasury securities. The U.S. Treasury securities are classified as held to maturity, mature in less than twelve months, and are reported at amortized cost which approximates fair value of $986,000 as of February 28, 2023.

Investment in Marketable Securities

Investment in Securities includes investments in equity securities. Investments in securities are reported at fair value with changes in unrecognized gains or losses included in other income on the statements of operations.

The following table summarizes the Company's marketable securities:

As of February 28, 2023, two securities accounted for $1,734,000 of the $1,895,000 balance in marketable securities, and $917,000 of the $930,000 in unrealized gains.

As of February 28, 2022 two securities were marked at the most recent trade in the security, versus the most recent statement value of zero. Both were expert market securities, these are over the counter securities where published bid and ask price is prohibited by the SEC under Rule 15c-211. One security was valued at $44,800, while the second was valued at $24,000. The Rule was not in effect as of February 28, 2021. These securities were sold in fiscal 2023.

At February 28, 2023 and February 28, 2022, the deferred tax liability related to unrecognized gains and losses on marketable securities was $229,000 and $0, respectively (see Note 7).

Fair Value of Financial Instruments

Accounting Standards Codification (“ASC”) Topic 820, “Fair Value Measurements and Disclosures” defines “fair value” as the price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. ASC 820 also sets forth a valuation hierarchy of the inputs (assumptions that market participants would use in pricing an asset or liability) used to measure fair value. This hierarchy prioritizes the inputs into the following three levels:

Level 1. Observable inputs that reflect unadjusted quoted prices for identical assets or liabilities traded in active markets.

Level 2: Inputs other than quoted prices included within Level 1 that are observable for the asset or liability, either directly or indirectly.

Level 3: Inputs that are generally unobservable. These inputs may be used with internally developed methodologies that results in management’s best estimate of fair value.

The table below shows the company’s marketable securities as of February 28, 2023 and February 28, 2022.

The carrying amounts of the Company’s short-term financial instruments, including cash and cash equivalents, accounts receivable, accounts payable, accrued expenses and other liabilities approximate their fair value due to the relatively short period to maturity for these instruments. The carrying value of long-term debt approximates fair value since the related rates of interest approximate current market rates.

Accounts Receivable

Accounts receivable consists of unsecured credit extended to the Company’s customers in the ordinary course of business. The Company reserves for any amounts deemed to be uncollectible based on past collection experiences and an analysis of outstanding balances using an allowance amount. The allowance amount was $0 as of February 28, 2023 and February 28, 2022.

Shipping and Handling

Shipping and handling costs billed to customers are recorded in net sales. Shipping costs incurred by the Company are recorded in cost of sales.

Inventories

Inventories are stated at the lower of cost and net realizable value. Cost is determined using the “first-in, first-out” (FIFO) method. The Company buys raw material only to fill customer orders. Excess raw material is created only when a vendor imposes a minimum quantity buy in excess of actual requirements. Such excess material will usually be utilized to meet the requirements of the customer’s subsequent orders. If excess material is not utilized after two fiscal years, it is fully reserved. Any inventory item once designated as reserved is carried at zero value in all subsequent valuation activities. Through February 28, 2022, the Company maintained a three inch wafer fab which procured raw wafers and produced finished wafers based on management’s estimates of projected future demand. Finished wafers are considered work-in-process since they are usable for many years, and in some circumstances can be used on more than one finished product depending on customer parameters.

The Company does not classify a portion of inventories as non-current since we cannot reasonably estimate based on the length of our operating cycle which items will or will not be used within twelve months.

The Company’s inventory valuation policy is as follows:

Property, Plant, Equipment, and Leasehold Improvements

Property, plant, and equipment is recorded at cost. Major renewals and improvements are capitalized, while maintenance and repairs that do not extend their expected life are expensed as incurred. Depreciation is provided on a straight-line basis over the estimated useful lives of the related assets. Leasehold improvements are amortized over the shorter of the lease term or the lives of the related assets:

Concentrations of Credit Risk

Financial instruments, which potentially subject the Company to concentration of credit risk, consist principally of cash and account receivables. The Company places its cash with high credit quality institutions. At times, such amounts may be in excess of the Federal Deposit Insurance Corporation (“FDIC”) insurance limits. The Company has not experienced any losses in such accounts and believes that it is not exposed to any significant credit risk on the accounts. As of February 28, 2023, and February 28, 2022, all non-interest bearing checking accounts were FDIC insured to a limit of $250,000. Deposits in excess of FDIC insured limits were approximately $129,000 at February 28, 2023 and $3,448,000 at February 28, 2022. With respect to the account receivables, most of the Company’s products are custom made pursuant to contracts with customers whose end-products are sold to the United States Government. The Company performs ongoing credit evaluations of its customers’ financial condition and maintains allowances for potential credit losses. Actual losses and allowances have historically been within management’s expectations.

Revenue Recognition

The Company records revenue in accordance with ASC 606, Revenues from Contracts with Customers (Topic 606) which requires an entity to recognize the amount of revenue to which it expects to be entitled for the transfer of promised goods and services to customers. Revenue is recognized at a point in time, generally upon shipment of products to customers. 

The core principle of the guidance in Topic 606 is that an entity should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services.

To achieve that core principle, the Company applied the following steps:

1. Identify the contract(s) with a customer.

The Company designs, develops, manufactures and markets solid-state semiconductor components and related devices. The Company’s products are used as components primarily in the military and aerospace markets.

The Company’s revenues are from purchase orders and/or contracts with customers associated with manufacture of products. We account for a contract when it has approval and commitment from both parties, the rights of the parties are identified, payment terms are identified, the contract has commercial substance and collectability of consideration is probable.

2. Identify the performance obligations in the contract.

The majority of the Company’s purchase orders or contracts with customers contain a single performance obligation, the shipment of products.

3. Determine the transaction price.

The transaction price reflects the Company’s expectations about the consideration it will be entitled to receive from the customer at a fixed price per unit shipped based on the terms of the contract or purchase order with the customer. To the extent our actual costs vary from the fixed price that was negotiated, we will generate more or less profit or could incur a loss.

4. Allocate the transaction price to the performance obligations in the contract.

5. Recognize revenue when (or as) the Company satisfies a performance obligation.

This performance obligation is satisfied when control of the product is transferred to the customer, which generally occurs upon shipment. The Company receives purchase orders for products to be delivered over multiple dates that may extend across reporting periods. The Company accounting policy treats shipping and handling activities as a fulfillment cost. The Company invoices for each order upon shipment and recognizes revenues at the fixed price for each distinct product sold when transfer of control has occurred, which is generally upon shipment.

In addition, the Company may have a contract or purchase order to provide a non-recurring engineering service to a customer. These contracts are reviewed and performance obligations are determined and we recognize revenue at the point in time in which each performance obligation is fully satisfied.

We recognize revenue on sales to distributors when the distributor takes control of the products ("sold-to" model). We have agreements with distributors that allow distributors a limited credit for unsaleable products, which we refer to as a "scrap allowance." Consistent with industry practice, we also have a "stock, ship and debit" program whereby we consider requests by distributors for credits on previously purchased products that remain in distributors' inventory, to enable the distributors to offer more competitive pricing. We have contractual arrangements whereby we provide distributors with protection against price reductions initiated by us after product is sold by us to the distributor and prior to resale by the distributor. In addition, we have a termination clause in one of our distributor agreements that would allow for a full credit for all inventory upon 60 days notice of terminating the agreement.

We recognize the estimated variable consideration to be received as revenue and record a related accrued expense for the consideration not expected to be received, based upon an estimate of product returns, scrap allowances, "stock, ship and debit" credits, and price protection credits that will be attributable to sales recorded through the end of the period. We make these estimates based upon sales levels to our customers during the period, inventory levels at the distributors, current and projected market conditions, and historical experience under the programs. Our estimates require the exercise of significant judgments. We believe that we have a reasonable basis to estimate future credits under the programs.

Related Party Transactions

The Company currently purchases and has purchased in the past die and wafers, as specified by the Company's customers, from ES Components. Mr. Aubrey, a director of the Company, is a minority owner, and an immediate family member of Mr. Aubrey is the majority owner of ES Components. For the fiscal year ended February 28, 2023, the Company purchased $116,000 of die and $0 of used equipment from ES Components. For the fiscal year ended February 28, 2022, the Company purchased $112,000 of die and $0 of used equipment from ES Components. The Company has included these expenses in cost of goods sold in the accompanying statement of operations. The Company occasionally makes sales to ES Components. For the fiscal years ended February 28, 2023 and February 28, 2022 sales were $0.

Income Taxes

Income taxes are accounted for under the asset and liability method of ASC 740-10, “Income Taxes”. Deferred tax assets and liabilities are recognized for the expected future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating loss and tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. Under ASC 740-10, the effect on deferred tax assets and liabilities or a change in tax rate is recognized in income in the period that includes the enactment date. Deferred tax assets are reduced to estimated amounts to be realized by the use of a valuation allowance.

The Company accounts for the uncertainty in income taxes in accordance with ASC 740-10 and evaluates its tax positions utilizing a two-step process. The first step is to determine whether it is more-likely-than-not that a tax position will be sustained upon examination based on the technical merits of the position. The second step is to measure the benefit to be recorded from tax positions that meet the more-likely-than-not recognition threshold by determining the largest amount of tax benefit that is greater than 50 percent likely of being realized upon ultimate settlement and recognizing that amount in the financial statements.

Refer to Note 7 for additional information on income taxes.

Net Income (Loss) Per Common Share

Net income/loss per common share is presented in accordance with ASC 260-10 “Earnings per Share.” Basic earnings per common share are computed using the weighted average number of common shares outstanding during the period. Diluted earnings per common share incorporate the incremental shares issuable upon the assumed exercise of stock options to the extent they are not anti-dilutive using the treasury stock method. The Company had no potentially dilutive securities outstanding during the fiscal years ended February 28, 2023 and February 28, 2022, therefore there is no effect from dilution on earnings per share.

Impairment of long-lived assets

Potential impairments of long-lived assets are reviewed annually or when events and circumstances warrant an earlier review. In accordance with ASC Subtopic 360-10, “Property, Plant and Equipment – Overall,” impairment is determined when estimated future undiscounted cash flows associated with an asset are less than the asset’s carrying value. No impairment losses were incurred during the fiscal years ended February 28, 2023 and 2022.

Financial Statement Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from these estimates and the differences could be material. Such estimates include variable consideration related to revenue recognition, stock-based compensation, depreciable life of property and equipment, accounts receivable allowance, deferred tax valuation allowance, and allowance for inventory obsolescence.

Stock based compensation

The Company records stock-based compensation in accordance with the provisions of ASC Topic 718, “Compensation-Stock Compensation,” which establishes accounting standards for transactions in which an entity exchanges its equity instruments for goods or services. Under ASC Topic 718, the Company recognizes an expense for the fair value of outstanding stock options and grants as they vest, whether held by employees or others. There are no stock options outstanding, and no options were granted or vested during the fiscal years ended February 28, 2023 and February 28, 2022 under the Company’s 2019 Stock Incentive Plan.

Leases

The Company capitalizes all leased assets pursuant to ASU 2016-02, “Leases (Topic 842),” which requires lessees to recognize right-of-use assets and lease liability, initially measured at present value of the lease payments, on its balance sheet for leases with terms longer than 12 months and classified as either financing or operating leases. The Company excludes short-term leases having initial terms of 12 months or less from Topic 842 as an accounting policy election and recognizes rent expense on a straight-line basis over the lease term.

Recent Accounting Pronouncements

In June 2016, the FASB issued ASU 2016-13, “Financial Instruments – Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments,”which significantly changes the impairment model for most financial instruments. Current guidance requires the recognition of credit losses based on an incurred loss impairment methodology that reflects losses once the losses are probable. Under the new standard, the Company will be required to use a current expected credit loss model (“CECL”) that will immediately recognize an estimate of credit losses that are expected to occur over the life of the consolidated financial instruments that are in the scope of this update, including trade receivables. The CECL model uses a broader range of reasonable and supportable information in the development of credit loss estimates. The Company will adopt the new guidance on a modified retrospective basis beginning with its first fiscal quarter of 2024. The adoption of this guidance is not expected to have a material impact on our financial statements.

The Company does not believe that any recently issued effective pronouncements, or pronouncements issued but not yet effective, if adopted, would have a material effect on the accompanying financial statements.

3. REVENUE RECOGNITION

As of February 28, 2023, and February 28, 2022, sales returns and allowances accrual activity is shown below:

As noted in Note 2 above, one of our distributor agreements has a termination clause that would allow for a full credit for all inventory upon 60 days notice of terminating the agreement. As of February 28, 2023 and February 28, 2022, the inventory balance at that distributor was $1,784,000 and $2,178,000, respectively. Based upon sales levels to and by the distributor during the period, inventory levels at the distributor, current and projected market conditions, and historical experience under the program, we believe it is highly unlikely that the distributor would exercise termination. Should it occur, we believe the products could be sold to other distributors or held in inventory for future sale.

The Company warrants that its products, when delivered, will be free from defects in material workmanship under normal use and service. The obligations are limited to replacing, repairing, or reimbursing for, at the option of the Company, any products that are returned within one year after the date of shipment. The Company does not reserve for potential warranty costs based on historical experience and the nature of its cost tracking system.

4. INVENTORIES

As of February 28, 2023, inventories consist of the following:

As of February 28, 2022, inventories consist of the following:

Wafer related inventory, which included raw wafers and work-in-process wafers through February 28, 2022, and wafer bank (completed wafers that are available to be consumed in the Company’s products) during both fiscal years, net of reserves, totaled $589,000 as of February 28, 2023 and $965,000 as of February 28, 2022. As of February 28, 2023, 100% of the wafer bank inventory consisted of wafers manufactured between calendar year 2018 and 2022. We do not expect all of our wafer inventory to be consumed within twelve months; however, since it is not possible to know which wafers will or will not be used, we classify all our inventory as current.

5. PROPERTY, PLANT AND EQUIPMENT

As of February 28, 2023, and February 28, 2022, property, plant, and equipment consist of the following:

Depreciation and amortization expense was $363,000 and $264,000 for the fiscal years ended February 28, 2023 and February 28, 2022, respectively, and is included in cost of sales in the accompanying statements of operations.

We did not relocate our wafer fab to our new facility.  Certain wafer fab equipment with a net book value as of February 28, 2022 of $0 was not transferred to our new facility and was sold as scrap.

6. ACCRUED EXPENSES AND OTHER CURRENT LIABILITIES

As of February 28, 2023, and February 28, 2022, accrued expenses and other current liabilities consist of the following:

7. INCOME TAXES

The Company did not have a provision for income taxes (current or deferred tax expense) for tax years ended February 28, 2023, and February 28, 2022.

A reconciliation of the U.S. federal statutory tax rate to the Company’s effective tax rate for fiscal year ended February 28, 2023, and February 28, 2022, is as follows:

Total net deferred taxes are comprised of the following at February 28, 2023 and February 28, 2022:

A valuation allowance is recorded to reduce the deferred tax asset if, based on the weight of the evidence, it is more likely than not that some portion or all of the deferred tax asset will not be realized. After consideration of all the evidence, both positive and negative, management has determined that a valuation allowance of $3,193,000 and $3,359,000 for the years ended on February 28, 2023 and February 28, 2022 respectively, is necessary to reduce the deferred tax asset to the amount that will more likely than not be realized.

On March 27, 2020, the Coronavirus Aid, Relief and Economic Security (“CARES”) Act was enacted and signed into law. Certain provisions of the CARES Act could impact the 2019 income tax provision computations of the Company and will be reflected in the period of enactment (tax year 2020). The CARES Act, among other things, contains modifications on the limitation of business interest expense under Section 163(j), allow for NOL carryovers and carrybacks to offset 100% of taxable income for taxable years before 2021, and includes a technical correction to the TCJA with respect to Qualified Improvement Property ("QIP") where such property has a 15-year recovery period for purposes of the general depreciation system of Section 168(a). The Company has evaluated the impact of the CARES Act, and it believes that none of the modifications or tax law changes will result in any material benefit.

As of February 28, 2023, the Company estimates it has approximately $10.7 million of Federal and $7.8 million of state net operating loss (“NOL”) carryforwards as compared to $9.1 million of Federal and $6.2 million of state net operating loss carryforwards as of February 28, 2022. The remaining balance of federal NOL carryforwards will begin to expire in 2029. Such net operating losses are available to offset future taxable income, if any. As the utilization of such net operating losses for tax purposes is not assured, the deferred tax asset has been fully reserved through the recording of a 100% valuation allowance.

Under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended, (the Code), substantial changes in the Company’s ownership may limit the amount of net operating loss and research and development credit carryforwards that could be used annually in the future to offset taxable income. A formal Section 382 study has not been completed to determine if an ownership change has occurred and if its net operating losses are subject to an annual limitation. Such annual limitations could affect the utilization of NOL and tax credit carryforwards in the future.

The Federal net operating loss carryforwards will expire as follows:

8. STOCK OPTIONS

There are no stock options outstanding and no options have been granted during the fiscal years ended February 28, 2023 and February 28, 2022 under the Company’s 2019 Stock Incentive Plan.

9. EMPLOYEE BENEFIT PLANS

The Company has a 401k and Profit Sharing Plan (the “Profit Sharing Plan”) in which substantially all employees may participate after three months of service. Contributions to the Profit Sharing Plan by participants are voluntary. The Profit Sharing Plan allows for matching and discretionary employer contributions. In addition, the Company may make additional contributions at its discretion. The Company did not contribute to the Profit Sharing Plan during the fiscal years ended February 28, 2023 and February 28, 2022.

10. DISAGGREGATION OF REVENUES AND MAJOR CUSTOMERS

Revenues from domestic and export sales to unaffiliated customers for the fiscal years ended February 28, 2023, and February 28, 2022, are as follows:

Revenues from domestic and export sales are attributed to global geographic regions according to the location of the customer’s primary manufacturing or operating facilities.

For the fiscal years ended February 28, 2023, and February 28, 2022, approximately 81% and 85%, respectively, of the Company’s sales have been attributable to contracts with customers whose products are sold to the United States government. The remaining 19% and 15%, respectively of sales are for non-military, scientific and industrial applications, or to distributors where we do not have end user information.

For the year ended February 28, 2023, sales to Raytheon Technologies Corporation accounted for approximately 46% of net sales. No other customer accounted for more than 10% of net sales.

For the year ended February 28, 2022, sales to Raytheon Technologies Corporation accounted for approximately 47% of net sales, sales to L3Harris Technologies accounted for 15% of net sales, sales to USI Electronics accounted for 13% of net sales, and sales to Honeywell accounted for 11% of net sales.

11. MAJOR SUPPLIERS

For the year ended February 28, 2023, purchases from the Company’s top supplier, Platronics Seals accounted for 21% of the Company's total purchases of production materials. Other suppliers that represented more than 10% of total purchases were Wuxi Streamtek, which accounted for 16% of total purchases, and Stellar Industries, which accounted for 15% of total purchases.

For the year ended February 28, 2022, purchases from the Company’s top supplier, Platronics Seals accounted for 25% of the Company's total purchases of production materials. Other suppliers that represented more than 10% of total purchases were Wuxi Streamtek, which accounted for 22% of total purchases, and Stellar Industries, which accounted for 12% of total purchases.

12. COMMITMENTS AND CONTINGENCIES