This Annual Report on Form 10-K contains forward-looking statements within the meaning of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and the Securities Act of 1933, as amended (the “Securities Act”), which are subject to risks, uncertainties, and assumptions that are difficult to predict. All statements in this Annual Report on Form 10-K, other than statements of historical fact, are forward-looking statements. These forward-looking statements are made pursuant to safe harbor provisions of the Private Securities Litigation Reform Act of 1995. The forward-looking statements include statements, among other things, concerning: effects resulting from certain module manufacturing changes and associated restructuring activities; our business strategy, including anticipated trends and developments in and management plans for our business and the markets in which we operate; future financial results, operating results, revenues, gross margin, operating expenses, products, projected costs (including estimated future module collection and recycling costs), warranties, solar module technology and cost reduction roadmaps, restructuring, product reliability, investments, business acquisitions, and capital expenditures; our ability to continue to reduce the cost per watt of our solar modules; the impact of public policies, such as tariffs or other trade remedies imposed on solar cells and modules; effects resulting from pending litigation;litigation, including the opt-out action against us; our ability to expand manufacturing capacity worldwide; our ability to reduce the costs to develop and construct photovoltaic (“PV”) solar power systems; research and development (“R&D”) programs and our ability to improve the wattage of our solar modules; sales and marketing initiatives; and competition. In some cases, you can identify these statements by forward-looking words, such as “estimate,” “expect,” “anticipate,” “project,” “plan,” “intend,” “seek,” “believe,” “forecast,” “foresee,” “likely,” “may,” “should,” “goal,” “target,” “might,” “will,” “could,” “predict,” “continue,” and the negative or plural of these words, and other comparable terminology. Forward-looking statements are only predictions based on our current expectations and our projections about future events. All forward-looking statements included in this Annual Report on Form 10-K are based upon information available to us as of the filing date of this Annual Report on Form 10-K and therefore speak only as of the filing date. You should not place undue reliance on these forward-looking statements. We undertake no obligation to update any of these forward-looking statements for any reason, whether as a result of new information, future developments, or otherwise. These forward-looking statements involve known and unknown risks, uncertainties, and other factors that may cause our actual results, levels of activity, performance, or achievements to differ materially from those expressed or implied by these statements, including, but not limited to:

You should carefully consider the risks and uncertainties described under this section.

We are a leading global provider of comprehensive PV solar energy solutions. We design, manufacture, and sell PV solar modules with an advanced thin film semiconductor technology and also develop design, construct, and sell PV solar power systems that primarily use the modules we manufacture. Additionally, we provide operations and maintenance (“O&M”) services to system owners. We have substantial, ongoing R&D efforts focused on module and system-levelvarious technology innovations. We are the world’s largest thin film PV solar module manufacturer and one of the world’s largest PV solar module manufacturers.

As a field-proven technology, our CdTe solar modules offer certain advantages over conventional crystalline silicon based solar modules by delivering competitive efficiency, higher real-world energy yield, and long-term reliability. Proven to deliver up to 8% more usable energy per nameplate watt than conventionalmonofacial crystalline silicon technologies in certain geographic markets and with a record of reliable system performance, our CdTe technology delivers more energy, more consistently, over the lifetime of a PV solar power system. Our Series 6 module technology, with its combination of high wattage, low manufacturing costs, a larger form factor, and balance of systems (“BoS”) component compatibility, has further enhanced our competitive position since the launch of such technology in 2018. We expect our continued transition to Series 6 module technology to enable us to maximize the intrinsic cost advantage of CdTe thin film technology versus crystalline silicon.

We are vertically integrateddiversified across substantially the entire solar value chain. Many of the efficiencies cost reductions, and capabilities that we deliver to our customers are not easily replicable for other industry participants that are not vertically integrateddiversified in a similar manner. Accordingly, our operational model offers PV solar energy solutions that benefit from our wide range of capabilities, including advanced PV solar module manufacturing, project development, engineering and plant optimization, grid integration and plant control systems, procurement and construction services, and O&M services.

We are committed to creating long-term shareholder value through a decision-making framework that delivers a balance of growth, profitability, and liquidity. This framework has enabled us to fund our Series 6 transitionmanufacturing and capacity expansion initiatives using cash flows generated by our operations despite substantial downward pressure on the price of solar modules and systems due to pricing competition, demand fluctuations, and significant overcapacity in the industry. Our financial viability provides strategic optionality as we evaluate how to invest in our business and generate returns for our shareholders. Our financial viability and bankability also enable us to offer meaningful module and system warranties, after installation, which provide us with a competitive advantage relative to somemany of our peers in the solar industry in the context of project financing and offering PV solar energy solutions to long-term owners. Furthermore, we expect our financial discipline and ability to manage operating costs to enhance our profitability as we continue to scale our business.

In addition to our financial commitments, we are also committed to minimizing the environmental impacts and enhancing the social and economic benefits of our products across their life cycle, from raw material sourcing through end-of-life module recycling. Accordingly, our modules and systems provide an ecologically leading solution to climate change, energy security, and water scarcity, which also enables our customers to achieve their sustainability objectives. On a lifecycle basis, our thin film module technology has the smallest carbon footprint, fastest energy payback time, smallest carbon footprint, and lowest water use of any PV solar technology on the market.

As a result of our specialized manufacturing process, the carbon footprint of our modules is up to six times lower than conventional crystalline silicon modules and a fraction of the carbon footprint of conventional energy sources. Furthermore, our technology displaces up to 98% of greenhouse gas emissions and other air pollutants when replacing traditional forms of energy generation. Our manufacturing process also facilitates the fastestThe energy payback time (which is the amount of time a system must operate to recover the energy required to produce it) of all PV solar technologies.our module technology is facilitated by our specialized manufacturing process. In less than six months under high irradiance conditions, our systems produce more energy than was required to create them, whichthem. This energy payback time represents a 50-fold energy return on investment over a theoretical 25-year system lifetime and an abundant net energy gain to the electricity grid. Our module technology also has a carbon footprint that is up to six times lower than the carbon footprint of conventional crystalline silicon modules and a fraction of the carbon footprint of conventional energy sources. Furthermore, our module technology displaces up to 98% of greenhouse gas emissions and other air pollutants when replacing traditional forms of energy generation. Our modules also use up to 400 times less water per MW hour than conventional energy sources and up to 24 times less water than other PV solar technologies.modules. In addition, our industry-leading

We are focusing on markets and energy applications in which solar power can be a least-cost, best-fit energy solution, particularly in regions with high solar resources, significant current or projected electricity demand, and/or relatively high existing electricity prices. We differentiate our product offerings by geographic market and localize the solution, as needed. Our consultative approach to our customers’ solar energy needs and capabilities results in customized solutions to meet their economic goals. As a result, we have designed our product and service offerings according to the following business areas:

Solar energy is one of the fastest growing forms of renewable energy with numerous economic and environmental benefits that make it an attractive complement to and/or substitute for traditional forms of energy generation. In recent years, the price of PV solar power systems, and accordingly the cost of producing electricity from such systems, has dropped to levels that are competitive with or even below the wholesale price of electricity in many markets. This rapid price decline has opened new possibilities to develop systems in somemany locations with limited or no financial incentives. Other technological developments in the industry, such as the developmentadvancement of energy storage capabilities, have further enhanced the prospects of solar energy as a competitivean alternative to traditional forms of energy generation. Furthermore, the fact that a PV solar power system requires no fuel provides a unique and valuable hedging benefit to owners of such systems relative to traditional energy generation assets. Once installed, PV solar power systems can function for 25 or moreover 35 years

with relatively less maintenance or oversight compared to many other forms of generation. In addition to these economic benefits, solar energy has substantial environmental benefits. For example, PV solar power systems generate no greenhouse gas or other emissions and use minimal amounts of water compared to traditional energy generation assets. Worldwide solar markets continue to develop, aided by the above factors as well as demand elasticity resulting from declining industry average selling prices, both at the module and system level, which have made solar power one of the most economicaleconomically attractive sources of energy.

Module average selling prices in many global markets have experienced an accelerated declinedeclined in recent years and are expected to continue to decline to some degree in the future. In the aggregate, we believe manufacturers of solar cells and modules have significant installed production capacity, relative to global demand, and the ability for additional capacity expansion. We believe the solar industry may from time to time experience periods of structural imbalance between supply and demand (i.e., where production capacity exceeds global demand), and that such periods will continue to put pressure on pricing. We believe the solar industry is currently in such a period, due in part to recent developments in China, which include feed-in-tariff reductions causing deferment of in-country project development. Additionally, intense competition at the system level may result in an environment in which pricing falls rapidly, thereby further increasing demand for solar energy solutions but constraining the ability for project developers EPC companies, and vertically-integrated companies such as First Solardiversified module manufacturers to sustain meaningful and consistent profitability. In light of such market realities, we are focusing on our strategies and points of differentiation, which include our advanced module and system technologies,technology, our manufacturing process, our vertically-integrated business model,diversified capabilities, our financial viability, and the sustainability advantage of our modules and systems.

We have established and are continuingcontinue to develop a global business presence. Energy markets are, by their nature, localized, with different drivers and market forces impacting electricity generation and demand in a particular region or for a particular application. Accordingly, our business is evolving worldwide and is shaped by the varying ways in which our PV solar energy solutionsofferings can be a compelling and economically viable solutionsolutions to energy needs in different markets and applications.various markets. The following markets represent the key markets for our PV solar modules and systems.

We are diversified across the solar value chain. Many of the efficiencies and capabilities that we deliver to regulationour customers are not easily replicable for other industry participants that are not diversified in a similar manner. Accordingly, our operational model offers PV solar energy solutions that benefit from our wide range of capabilities, including advanced PV solar module manufacturing, project development, engineering and variability basedplant optimization, grid integration and plant control systems, construction services, and O&M services.

We are committed to creating long-term shareholder value through a decision-making framework that delivers a balance of growth, profitability, and liquidity. This framework has enabled us to fund our Series 6 manufacturing and capacity expansion initiatives using cash flows generated by our operations despite substantial downward pressure on the availabilityprice of solar modules and sizesystems due to competition, demand fluctuations, and significant overcapacity in the industry. Our financial viability provides strategic optionality as we evaluate how to invest in our business and generate returns for our shareholders. Our financial viability and bankability also enable us to offer meaningful warranties, which provide us with a competitive advantage relative to many of government subsidiesour peers in the solar industry in the context of project financing and economic incentives, suchoffering PV solar energy solutions to long-term owners. Furthermore, we expect our financial discipline and ability to manage operating costs to enhance our profitability as quotas, renewable portfolio standards, and tendering systems. we continue to scale our business.

In addition to these support programs,our financial incentives forcommitments, we are also committed to minimizing the environmental impacts and enhancing the social and economic benefits of our products across their life cycle, from raw material sourcing through end-of-life module recycling. Accordingly, our modules and systems provide an ecologically leading solution to climate change, energy security, and water scarcity, which also enables our customers to achieve their sustainability objectives. On a lifecycle basis, our thin film module technology has the fastest energy payback time, smallest carbon footprint, and lowest water use of any PV solar technology on the market.

The energy generation may include tax incentives, grants, loans, rebates,payback time (which is the amount of time a system must operate to recover the energy required to produce it) of our module technology is facilitated by our specialized manufacturing process. In less than six months under high irradiance conditions, our systems produce more energy than was required to create them. This energy payback time represents a 50-fold energy return on investment over a theoretical 25-year system lifetime and production incentives. Although we expectan abundant net energy gain to become less impacted by,the electricity grid. Our module technology also has a carbon footprint that is up to six times lower than the carbon footprint of conventional crystalline silicon modules and less dependent on thesea fraction of the carbon footprint of conventional energy sources. Furthermore, our module technology displaces up to 98% of greenhouse gas emissions and other air pollutants when replacing traditional forms of government supportenergy generation. Our modules also use up to 400 times less water per MW hour than conventional energy sources and up to 24 times less water than other PV solar modules. In addition, our industry-leading recycling process further enhances our sustainability advantage by recovering approximately 90% of the glass for reuse in new glass products and over time,90% of the semiconductor material for reuse in new modules.

Following an evaluation of the long-term sustainable cost structure, competitiveness, and risk-adjusted returns of our U.S. project development business, we have determined it is in the best interest of our stockholders to explore options for this business line. This exploration may result in, among other possibilities, a partnership with a third party who possesses complimentary competencies or a sale of all or a portion of our U.S. project development business. This exploration of options for our U.S. project development business is not subject to any definitive timetable and there can be no assurances that this process will continueresult in any transaction.

Solar energy is one of the fastest growing forms of renewable energy with numerous economic and environmental benefits that make it an attractive complement to play varying roles in acceleratingand/or substitute for traditional forms of energy generation. In recent years, the adoptionprice of PV solar power systems, and accordingly the cost of producing electricity from such systems, has dropped to levels that are competitive with or below the wholesale price of electricity in many markets. This rapid price decline has opened new possibilities to develop systems in many locations with limited or no financial incentives. Other technological developments in the industry, such as the advancement of energy storage capabilities, have further enhanced the prospects of solar energy as an alternative to traditional forms of energy generation. Furthermore, the fact that a PV solar power system requires no fuel provides a unique and valuable hedging benefit to owners of such systems relative to traditional energy generation assets. Once installed, PV solar power systems can function for over 35 years

We manufacture our CdTe solar modules on integrated production lines in an automated, proprietary, and continuous process. Our solar modules employ a thin layer of semiconductor material to convert sunlight into electricity. Our manufacturing process, eliminates the multiple supply chain operators and expensive and time-consuming batch processing steps that are used to produce crystalline silicon solar modules. We currently manufacture solar modules at our Perrysburg, Ohio; Kulim, Malaysia; and Ho Chi Minh City, Vietnam manufacturing facilities.

cover sheet that is laminated to encapsulate the device. We then apply anti-reflective coating material to the substrate glass to further improve the module’s performance by increasing its ability to absorb sunlight. Finally, junction boxes, termination wires, and an under-mount frame (for Series 6 modules) are applied to complete the assembly.

We maintain a robust quality and reliability assurance program that monitors critical process parameters and measures product performance to ensure that industry and more stringent internal standards are met. AcceptanceWe also conduct acceptance testing for electrical leakage, visual quality, and power measurement on a solar simulator are also conducted prior to preparing a module for shipment. The quality and reliability tests complement production surveillance with an ongoing monitoring program, subjecting production modules to accelerated life stress testing to help ensure ongoing conformance to requirements of the International Electrotechnical Commission and Underwriters Laboratories Inc. These programs help assure delivery of power and performance in the field with a high level of product quality and reliability.

Our R&D model differentiates us from much of our competition due to its vertical integration, from advanced research to product development, manufacturing, and applications. We continue to devote substantial resources to our R&D efforts, which generally focus on continually improving the wattage and energy yield of our solar modules. We also focus our R&D activities on continuously improving module durability and manufacturing efficiencies, including throughput improvement, volume ramp, and material cost reduction. Based on publicly available information, we are one of the leaders in R&D investment among PV solar module manufacturers, maintaining a rate of innovation that enables rapid wattage gains and cost reductions.

In the course of our R&D activities, we explore various technologies in our efforts to sustain competitive differentiation in our modules. We primarily conduct our R&D activities and qualify process and product improvements for full production at our Perrysburg, Ohio plant and then use a systematic process to propagate them to our other production lines. We believe that our systematic approach to technology change management provides continuous improvements and ensures uniform adoption across our production lines. In addition, our respective Series 6 and Series 4 production lines are replicas or near replicas of each other and, as a result, a process or production improvement on one line can be rapidly and reliably deployed to other production lines.

We regularly produce research cells in our laboratories, some of which are tested for performance and certified by independent labs, such as the National Renewable Energy Laboratory. Cell efficiency measures the proportion of light converted to electricity in a single solar cell at standard test conditions. Our research cells are produced using laboratory equipment and methods and are not intended to be representative of our manufacturing capability. Our module conversion efficiency has improved on average more than half a percent every year for the last ten years. We currently hold two world records for CdTe PV cell efficiency, achieving an independently certified research cell efficiency of 22.1% and a full aperture area module efficiency of 18.6%. We believe that our record cells demonstrate a potential long-term module efficiency entitlement of over 20% that is achievable using our commercial-scale manufacturing equipment.

We continue to invest infocus on key geographic markets, particularly in areas with abundant solar resources and sizable electricity demand, and additional customer relationships to diversify our customer base. We also collaborate with strategic partners inproviders of community solar solutions, which address the residential and small business sectors to provide a broad range of customers with access to competitively priced solar energy regardless of the suitability of their rooftops. Community solar utilizes relatively small ground-mounted installations that provide clean energy to utilities, which

then offer consumers the ability to buy into a specific community installation and benefit from the solar power generated by that resource. The demand for such offerings continues to build as states across the country are enacting community solar policies, and utilities are looking to diversify their energy generation portfolio in order to meet customer demand for affordable, clean energy. We also collaborate with providers of Community Choice Aggregation programs, which allow cities and counties to purchase power on behalf of residents and businesses to provide clean energy options at competitive prices. Our expertise in module technology and utility-scale generation, paired with community solar and/or Community Choice Aggregation, allows residential power consumers to “go solar,” including those who live in apartment buildings or whose home rooftops cannot accommodate solar panels.

The solar energy and renewable energy sectors are highly competitive and continually evolving as participants in these sectors strive to distinguish themselves within their markets and compete within the larger electric power industry. We

Our CdTe module manufacturing process uses approximately 30 types of raw materials and components to construct a solar module. One critical raw material in our production process is CdTe. Of the other raw materials and components, the following are also critical to our manufacturing process: front glass coated with transparent conductive oxide, other semiconductor materials, organics such as photo resist, tempered back glass, frames, packaging components such as interlayer, cord plate/cord plate cap, lead wire, and solar connectors. Before we use these materials and components in our manufacturing process, a supplier must undergo rigorous qualification procedures, and we continually evaluate new suppliers as part of our cost reduction roadmaps. When possible, we attempt to use suppliers that can provide a

raw material supply source that is near our manufacturing locations, reducing the cost and lead times for such materials. Several of our key raw materials and components are either single-sourced or sourced from a limited number of suppliers.

We are committed to extended producer responsibility and take into account the environmental impact of our products over their entire life cycle. As part of such efforts, we previously established the solar industry’s first comprehensive module collection and recycling program. Our module recycling process is designed to enablemaximize the recovery of valuable materials, including the glass and encapsulated semiconductor material, for use in new modules or other products and minimizesenhances the environmental impacts associated withsustainability profile of our modules at the end of their useful lives.modules. Approximately 90% of each collected First Solar module can be recycled into materials for reuse. For certain legacy customer sales contracts that were covered under this program, we agreed to pay the costs for the collection and recycling of qualifying solar modules, and the end-usersend users agreed to notify us, disassemble their solar power systems, package the solar modules for shipment, and revert ownership rights over the modules back to us at the end of the modules’ service lives. We currently have recycling facilities operating at each of our manufacturing facilities in the United States, Malaysia, and Vietnam and at our former manufacturing facility location in Germany.

The EU’s Waste ElectronicsElectrical and ElectricalElectronic Equipment (“WEEE”) directiveDirective places the obligation of recycling (including collection, treatment, and environmentally sound disposal) of electrical and electronic equipment products upon

Project development activities generally include (i) site selectionselecting, securing, and securing rights to acquire or usemaintaining the site,project site; (ii) obtaining the requisite interconnection and transmission studies,studies; (iii) executing an interconnection agreement,agreement; (iv) obtaining environmental and land-use permits,permits; and (v) maintaining effective site control, and (vi) entering into a PPA with an off-taker offor the power to be generated by the project. The sequence of such development activities varies by international location and, in certain locations, may begin by initially bidding for PPA or off-take agreements. These activities culminate in receiving the right to construct and operate a PV solar power system.

Depending on the market opportunity or geographic location, we may acquire projects in various stages of development or acquire project companies from developers in order to complete the development process, construct a system

incorporating our modules, and sell the system to a long-term owner. We may also collaborate with local partners in connection with these project development activities. Depending on the type of project or geographic location, PPAs or FiTfeed-in-tariff (“FiT”) structures define the price and terms the utility or customer will pay for power produced from the project. Depending primarily on the location, stage of development upon our acquisition of the project, and/or other site attributes, the development cycle typically ranges from one to two years but may be as long as five years. We may be required to incur significant costs for preliminary engineering, permitting, legal, and other expenses before we can determine whether a project is feasible, economically attractive, or capable of being built. If there is a delay in obtaining any required regulatory approvals, we may be forced to incur additional costs or impair our project assets, and the termination rights of the off-taker under the PPA may be triggered.

EPC services generally include (i) engineering design and related services, (ii) BoS procurement, (iii) advanced development of grid integration solutions, and (iv) construction contracting and management. Depending on the customer and market need, we may provide our full EPC services or subcontract with third parties to provide any combination of individual products and services within our EPC capabilities. We conduct performance testing of a system prior to substantial completion to confirm the system meets its operational and capacity expectations noted in the EPC agreement. For PV solar power systems we construct, we typically provide limited warranties for defects in engineering design, installation, and BoS part workmanship for a period of one to two years following the substantial completion of a system or a block within the system. We may also provide an energy

Our typical O&M service arrangements involve the performance of standard activities associated with operating and maintaining a PV solar power system. We perform such activities pursuant to the scope of services outlined in the underlying contract. These activities are considered necessary to optimize system performance and comply with PPAs, other agreements, and regulations. Although the scope of our services may varyvaries by contract and jurisdiction, our O&M

service arrangements generally include 24/7 system monitoring, certain PPA and other agreement compliance, NERC compliance, large generator interconnection agreement compliance, energy forecasting, performance engineering analysis, regular performance reporting, turn-key maintenance services including spare parts and corrective maintenance repair, warranty management, and environmental services. As part of our O&M services, we also typically provide an effective availability guarantee, which stipulates that a system will be available to generate a certain percentage of total possible energy during a specific period after adjusting for factors outside of our control as the service provider, such as weather, curtailment, outages, force majeure, and other conditions that may affect system availability.

In certain markets, the emergence of utility-owned generation has increased the number of potential project buyers as such utility customers benefit from a potentially low cost of capital available through rate-basing utility investments. Given their long-term ownership profile, utility-owned generation customers typically seek to partner with vertically-integrateddiversified companies such as First Solar, whothat can provide a broad spectrum of utility-scale generation solutions, including reliable PV solar technology, project development and construction, and O&M services, thereby mitigating their long-term ownership risks.

Our success depends, in part, on our ability to maintain and protect our proprietary technology and to conduct our business without infringing on the proprietary rights of others. We rely primarily on a combination of patents, trademarks, and trade secrets, as well as associate and third-party confidentiality agreements, to safeguard our intellectual property. We regularly file patent applications to protect inventions arising from our R&D activities and are currently pursuing patent applications in the United States and other countries. Our patent applications and any future patent applications mightmay not result in a patent being issued with the scope of the claims we seek, or at all, and any patents we may receive may be challenged, invalidated, or declared unenforceable. In addition, we have registered and/or have applied to register trademarks and service marks in the United States and a number of foreign countries for “First Solar.”

With respect to proprietary know-how that is not patentable and processes for which patents are difficult to enforce, we rely on, among other things, trade secret protection and confidentiality agreements to safeguard our interests. We believe that many elements of our PV solar module manufacturing processes, including our unique materials sourcing, involve proprietary know-how, technology, or data that are not covered by patents or patent applications, including technical processes, equipment designs, algorithms, and procedures. We have taken security measures to protect these elements. Our R&D personnel have entered into confidentiality and proprietary information agreements with us. These

We were incorporated in Delaware in February 2006 and completed our initial public offering of common stock in November 2006.

As of December 31, 2018,2019, we had approximately 6,4006,600 associates (our term for full and part-time employees), including approximately 5,1005,200 in our modules business and approximately 500 associates that work directly in our systems business. The remainder of our associates are in R&D, sales and marketing, and general and administrative positions. None of our associates are currently represented by labor unions or covered by a collective bargaining agreement. As we expand domestically and internationally, we may encounter either regional laws that mandate union representation or associates who desire union representation or a collective bargaining agreement. We believe that our relations with our associates are good.

We maintain a website at www.firstsolar.com. We make available free of charge on our website our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy statements, and any amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act, as soon as reasonably practicable after we electronically file such materials with, or furnish them to, the SEC. The information contained in or connected to our website is not incorporated by reference into this report. We use our website as one means of disclosing material non-public information and for complying with our disclosure obligations under the SEC’s Regulation FD. Such disclosures are typically included within the Investor Relations section of our website at investor.firstsolar.com. Accordingly, investors should monitor such portions of our website in addition to following our press releases, SEC filings, and public conference calls and webcasts. The SEC also maintains a website at www.sec.gov that contains reports and other information regarding issuers, such as First Solar, that file electronically with the SEC.

Our executive officers and their ages and positions as of February 21, 201920, 2020 were as follows:

Mark R. Widmar was appointed Chief Executive Officer in July 2016. He joined First Solar in April 2011 as Chief Financial Officer and also served as First Solar’s Chief Accounting Officer from February 2012 through June 2015. From March 2015 to June 2016, Mr. Widmar served as the Chief Financial Officer and through June 2018, served as a director on the board of the general partner of 8point3 Energy Partners LP (“8point3”), the joint yieldco formed by First Solar and SunPower Corporation in 2015 to own and operate a portfolio of selected solar generation assets. Prior to joining First Solar, Mr. Widmar served as Chief Financial Officer of GrafTech International Ltd., a leading global manufacturer of advanced carbon and graphite materials, from May 2006 through March 2011. Prior to joining GrafTech, Mr. Widmar served as Corporate Controller of NCR Inc. from 2005 to 2006, and was a Business Unit Chief Financial Officer for NCR from November 2002 to his appointment as Controller. He also served as a Division Controller at

Dell, Inc. from August 2000 to November 2002. Mr. Widmar also held various financial and managerial positions with Lucent Technologies Inc., Allied Signal, Inc., and Bristol Myers/Squibb, Inc. He began his career in 1987 as an accountant with Ernst & Young. Mr. Widmar holds a Bachelor of Science in business accounting and a Masters of Business Administration from Indiana University.

Georges Antoun was appointed Chief Commercial Officer in July 2016. He joined First Solar in July 2012 as Chief Operating Officer before being appointed as President, U.S. in July 2015. Mr. Antoun has over 30 years of operational and technical experience, including leadership positions at several global technology companies. Prior to joining First Solar, Mr. Antoun served as Venture Partner at Technology Crossover Ventures (“TCV”), a private equity and venture firm that he joined in July 2011. Before joining TCV, Mr. Antoun was the Head of Product Area IP & Broadband Networks for Ericsson, based in San Jose, California. Mr. Antoun joined Ericsson in 2007, when Ericsson acquired Redback Networks, a telecommunications equipment company, where Mr. Antoun served as the Senior Vice President of World Wide Sales & Operations. After the acquisition, Mr. Antoun was promoted to Chief Executive Officer of the Redback Networks subsidiary. Prior to Redback Networks, Mr. Antoun spent five years at Cisco Systems, where he served as Vice President of Worldwide Systems Engineering and Field Marketing, Vice President of Worldwide Optical Operations, and Vice President of Carrier Sales. Prior to Cisco Systems, he was the Director of Systems Engineering at Newbridge Networks, a data and voice networking company. Mr. Antoun started his career at Nynex (now Verizon Communications), where he was part of its Science and Technology Division. Mr. Antoun also served as a member of the board of directors of Ruckus Wireless, Inc. and Violin Memory, Inc., both publicly-traded companies. He earned a

Philip Tymen deJong was appointed Chief Operating Officer in July 2015. Mr. deJong has comprehensive leadership responsibility for areas including manufacturing, EPC, operations and maintenance, quality and reliability, supply chain, product management, and information technology. Mr. deJong joined First Solar in January 2010 as Vice President, Plant Management and served in several Senior Vice President roles in manufacturing and operations prior to being appointed Senior Vice President, Manufacturing & EPC in January 2015. Prior to joining First Solar, Mr. deJong was Vice President of Assembly/Test Manufacturing for Numonyx Corporation. Prior to that, he worked for 25 years at Intel Corporation, holding various positions in engineering, manufacturing, wafer fabrication management, and assembly/test manufacturing. Mr. deJong holds a Bachelor of Science degree in industrial engineering/mechanical engineering from Oregon State University and has completed advanced study at the University of New Mexico Anderson School of Management.

Raffi Garabedian has been the Chief Technology Officer of First Solar since May 2012 and managesleads the Company’s research and development, includingtechnology, PV module and power plant system products and roadmaps. Mr. Garabedian joined First Solar in June 2008 as Director of Disruptive Technologies. Prior to First Solar, Mr. Garabedian spent over 15 years in the MEMS (micro-electro-mechanical systems) industry, developing new products ranging from automotive engine control sensors to fiber optic telecommunications switching systems. He was the founding CEO of Touchdown Technologies, Inc., which was acquired by Verigy, as well as Micromachines Inc., which was acquired by Kavlico. Mr. Garabedian is named on approximately 28 issued U.S. patents. Mr. Garabedian serves as a director on the boards of Covelant Metrology

and Heliotrope Technologies. Mr. Garabedian earned a Bachelor of Science degree in electrical engineering from Rensselaer Polytechnic Institute and a Master of Science degree in electrical engineering with a focus on semiconductor and microsystems technology from the University of California Davis.

Paul Kaleta joined First Solar in March 2014 as Executive Vice President & General Counsel. In February 2017, Mr. Kaleta was appointed as Corporate Secretary. Prior to joining First Solar, Mr. Kaleta was Executive Vice President, General Counsel, Shared Services & Secretary, and Chief Compliance Officer for NV Energy, Inc., which was acquired by Berkshire Hathaway’s Energy Group in December 2013. Before that, he was Vice President and General Counsel for Koch Industries, Inc., one of the world’s largest privately held companies with diverse businesses worldwide, including refining, petrochemicals, and commodity trading, among others. He also served in a number of legal and other leadership roles for Koch companies. Before joining Koch, he was Vice President and General Counsel of Niagara Mohawk Power Corporation (now part of National Grid). In private practice, Mr. Kaleta was an equity partner in the Washington D.C. law firm Swidler Berlin LLP and an associate in the Washington D.C. office of Skadden, Arps, Slate, Meagher & Flom LLP. He also served as a federal judicial clerk. Mr. Kaleta is the founding chair of the Southern Nevada Chapter of the “I Have a Dream Foundation” (now “Core Academy-powered by The Rogers Foundation”), a member of the board of directors of Advanced Energy Economy, aformer member of the client advisory council of Lex Mundi, and has taught both energy law and business ethics and leadership, as an adjunct professor, among other industry professional and community activities. Mr. Kaleta holds a juris doctor degree from Georgetown University Law Center and a bachelor’sBachelor of Arts degree in philosophy and English from Hamilton College.

Christopher R. Bueter was appointedCaroline Stockdale joined First Solar in October 2019 as Executive Vice President, Human Resources in February 2016. Mr. Bueter joined First Solar in November 2009 as Global Director for Industrial Relations and also served as Vice President, Human Resources Global Business Development and Corporate Services, Vice President, Global Human Resources and Labor Relations, and Senior Vice President, Human Resources.Communications. Prior to joining First Solar, Mr. Buetershe served as the Vice PresidentChief Executive Officer for First Perform, a provider of Global Employee Relations at Dana Corporation, an American-based worldwide supplier of powertrain components. In his 24 years at Dana Corporation, he served inhuman resources services for a variety of roles, including Corporate Director of Employee Relations and Distribution Services Divisioncustomers, from Fortune 100 companies to cyber start-ups. Previously, she served as Chief Human Resources Manager. Mr. BueterOfficer for Medtronic from 2010 to 2013 and Warner Music Group from 2005 to 2009. Before joining Warner Music Group, she served as the senior human resources leader in global divisions of American Express from 2002 to 2005 and General Electric from 1997 to 2002. Ms. Stockdale is a member of the Forbes Human Resources Council. Ms. Stockdale holds a Bachelor of ScienceArts in human resources managementpolitical theories and institutions, philosophy, from the University of Toledo, and a juris doctor degree from the University of Toledo Law School.Sheffield.

An investment in our stock involves a high degree of risk. You should carefully consider the following information, together with the other information in this Annual Report on Form 10-K, before buying shares of our stock. If any of the following risks or uncertainties occur, our business, financial condition, and results of operations could be materially and adversely affected and the trading price of our stock could decline.

Risks Related to Our Markets and Customers

In comparison to traditional forms of energy generation, the solar energy market continues to be at a relatively early stage of development. If utility-scale PV solar technology proves unsuitable for widespreadcontinued adoption at economically attractive rates of return or if additional demand for solar modules and systems fails to develop sufficiently or takes longer to develop than we anticipate, we may be unable to grow our business or generate sufficient net sales to sustain profitability. In addition, demand for solar modules, related technologies, and systems in our targeted markets may develop to a lesser extent than we anticipate. Many factors may affect the viability of widespreadcontinued adoption of utility-scale PV solar technology in our targeted markets, as well as the demand for solar modules and systems generally, including the following:

Although we believe that solar energy will experience widespread adoption in those applications where it competes economically with traditional forms of energy without any support programs, in certain markets our net sales and profits remain subject to variability based on the availability and size of government subsidies and economic incentives. Federal, state, and local governmental bodies in many countries have provided subsidies in the form of FiTs, rebates, tax incentives, and other incentives to end-users,end users, distributors, system integrators, and manufacturers of PV solar products. Many of these support programs expire, phase out over time, require renewal by the applicable authority, or may be amended. A summary of certain recent developments in the major government support programs that may impact our business appears under Item 1. “Business – Support Programs.” To the extent these support programs are reduced earlier than previously expected or are changed retroactively, such changes could negatively impact demand and/or price levels for our solar modules and systems, lead to a reduction in our net sales, and adversely impact our operating results. Another consideration in the U.S. market, and to a lesser extent in other global markets, is the effect of governmental land-use planning policies and environmental policies on utility-scale PV solar development. The adoption of restrictive land-use designations or environmental regulations that proscribe or restrict the siting of utility-scale solar facilities could adversely affect the marginal cost of such development.

In addition, policies of the U.S. presidential administration may create regulatory uncertainty in the renewable energy industry, including the solar industry, and our business, financial condition, and results of operations could be adversely affected. Members of the U.S. presidential administration, including representatives of the U.S. Department of Energy, have made public statements that indicate that the administration may not be supportive of various clean energy programs and initiatives designed to curtail climate change. For example, in June 2017, the U.S. President announced that the United States would withdraw from participation in the 2015 Paris Agreement on climate change mitigation. In addition, the administration has indicated that it may be supportive of overturning or modifying policies of or regulations enacted by the prior administration that placed limitations on gas and coal electricity generation, mining, and/or exploration. Additionally, in October 2017, the United States Environmental Protection Agency (“U.S. EPAEPA”) issued a Notice of Proposed Rulemaking, proposing to repeal the previous U.S. presidential administration’s Clean Power Plan (“CPP”), which establishesestablished standards to limit carbon dioxide emissions from existing power generation facilities. In August 2018,June 2019, the U.S. EPA proposedissued the final Affordable Clean Energy (“ACE”) rule and repealed the CPP. Under the ACE rule, which would establish guidelines for states to develop plans to address greenhouse gas emissions from existing coal-fired power plants. The

emissions from electric utility generation facilities would be regulated only through the use of various “inside the fence” or onsite efficiency improvements and emission control technologies. In contrast, the CPP allowed facility owners to reduce emissions with “outside the fence” measures, including those associated with renewable energy projects. While the ACE rule would replaceis currently subject to legal challenges and may be subject to future challenges, the Clean Power Plan, whichultimate resolution of such challenges, and the U.S. EPA has proposed to repeal. Ifultimate impact of the ACE rule, is uncertain. As a result of the new ACE rule and other policies or actions of the current U.S. administration and/or the U.S. Congress, takes action, or continues to publicly speak out about the need to take action, in furtherance of any such policies, we wouldmay be subject to significant risks, including the following:

The United States has also imposed import tariffs in connection with other proceedings during 2018.2018 and 2019. In March 2018, the U.S. President proclaimed tariffs on certain imported aluminum and steel articles, generally at rates of 10% and 25%, respectively, under Section 232 of the Trade Expansion Act of 1962. AllCurrently, all countries except Argentina, Australia, Canada, and AustraliaMexico are covered by the aluminum tariff. Alltariff, and all countries except Argentina, Australia, Brazil, Canada, Mexico, and South Korea are covered by the steel tariff, and the steel tariff rate on imports from Turkey is 50%, rather than 25%.tariff. In addition, in May 2018, the U.S. President proclaimed absolute quotas for the import of aluminum articles from Argentina and the import of steel articles from Argentina, Brazil, and South Korea. In January 2020, the U.S. President announced the expansion of tariffs under Section 232 to cover certain derivative steel and aluminum articles. Separately, in a series of actions during 2018 and 2019 that followed an investigation under Section 301 of the Trade Act of 1974, the United States imposed tariffs on various articles imported

Internationally, in July 2018, the Indian government imposed a safeguard duty on solar cells and modules imported from various countries, including member countries of the Organisation for Economic Co-operation and Development (“OECD”), China, and Malaysia, for a two-year period, starting at 25% through July 2019 and declining by five percentage points in each subsequent six-month period. In addition, in March 2019, the Indian government issued technical guidelines related to the enlistment of approved models and manufacturers of PV solar modules. Pursuant to the regulations, after March 2020, all projects owned by the Indian government or from which energy would be supplied to the government would be required to procure eligible components from these enlisted manufacturers. The enlistment procedures have certain distinguishing criteria depending on whether a manufacturer is located inside or outside of India, which may restrict our ability to access the Indian market. Such tariffs and policies, or any other U.S. or global trade remedies or other trade barriers, may directly or indirectly affect U.S. or global markets for solar energy and our business, financial condition, and results of operations.

These examples show that established markets for PV solar development face uncertainties arising from policy, regulatory, and governmental constraints. While the expected potential of the emerging markets we are targeting is significant, policy promulgation and market development are especially vulnerable to governmental inertia, political instability, the imposition of trade remedies and other trade barriers, geopolitical risk, fossil fuel subsidization, potentially stringent localization requirements, and limited available infrastructure.

We face numerous difficulties in executing on our long-term strategic plans, particularly in new foreign jurisdictions, including the following:

Our customers include integrators and operators of systems, utilities, independent power producers, commercial and industrial companies, and other system owners, who may experience intense competition at the system level, thereby constraining the ability for such customers to sustain meaningful and consistent profitability. The loss of any of our large customers, their inability to perform under their contracts, or their default in payment could significantly reduce our net sales and/or adversely impact our operating results. While our contracts with customers typically have certain firm purchase commitments and may include provisions for the payment of amounts to us in certain events of contract termination, these contracts may be subject to amendments made by us or requested by our customers. These amendments may reduce the volume of modules to be sold under the contract, adjust delivery schedules, or otherwise decrease the expected revenue under these contracts. Although we believe that we can mitigate this risk, in part, by reallocating modules to other customers if the need arises, we may be unable, in whole or in part, to do so on similar terms or at all. We may also mitigate this risk by requiring some form of payment security from our customers, such as parent guarantees, bank guarantees, surety bonds, or commercial letters of credit. However, in the event the providers of such payment security fail to perform their obligations, our operating results could be adversely impacted.

We may expand our portfolio of offerings to include solutions that build upon our core competencies but for which we have not had significant historical experience, including variations in our traditional product offerings or other offerings related to commercial and industrial customers and community solar. We cannot be certain that we will be able to ascertain and allocate the appropriate financial and human resources necessary to grow these business areas. We could invest capital into growing these businesses but fail to address market or customer needs or otherwise not experience

Risks Related to our Operations, Manufacturing, and Technology

Our future success depends on our ability to effectively balance manufacturing production with market demand, convert existing production facilities to support new product lines, such asdecrease our transition to Series 6 module manufacturing and, when necessary, continue to build new manufacturing plants over time in response to such demand and add production lines in a cost-effective manner, all of which are subject to risks and uncertainties.

The solar and renewable energy industries are highly competitive and are continually evolving as participants strive to distinguish themselves within their markets and compete with the larger electric power industry. Within the global PV solar industry, we face intense competition from crystalline silicon solar module manufacturers and other thin film solar module manufacturers. Existing or future solar module manufacturers might be acquired by larger companies with significant capital resources, thereby further intensifying competition with us. In addition, the introduction of a low cost disruptive technology could adversely affect our ability to compete, which could reduce our net sales and adversely affect our results of operations.

During any such period, our competitors could decide to reduce their sales prices in response to competition, even below their manufacturing costs, in order to generate sales, and may do so for a sustained period. Other competitors may have direct or indirect access to sovereign capital, which could enable such competitors to operate at minimal or negative operating margins for sustained periods of time. As a result, we may be unable to sell our solar modules or systems at attractive prices, or for a profit, during any period of excess supply of solar modules, which would reduce

We perform a variety of module quality and life tests under different conditions upon which we base our assessments and warranty of future module performance over the duration of the warranty. However, if our thin film solar modules, including our Series 4 modules and Series 6 modules, perform below expectations, we could experience significant warranty and related expenses, damage to our market reputation, and erosion of our market share. With respect to our modules, we provide a limited warranty covering defects in materials and workmanship under normal use and service conditions for approximately 10 years. We also typically warrant that modules installed in accordance with agreed-upon specifications will produce at least 98% of their labeled power output rating during the first year, with the warranty coverage reducing by 0.5% every year thereafter throughout the approximate 25-year limited power output warranty period. As an alternative form of our standard limited module power output warranty, we also offer an aggregated or system-level limited module performance warranty. This system-level limited module performance warranty is designed for utility-scale systems and provides 25-year system-level energy degradation protection. This warranty represents a practical expedient to address the challenge of identifying, from the potential millions of modules installed in a utility-scale system, individual modules that may be performing below warranty thresholds by focusing on the aggregate energy generated by the system rather than the power output of individual modules. The system-level limited module performance warranty is typically calculated as a percentage of a system’s expected energy production, adjusted for certain actual site conditions, with the warranted level of performance declining each year in a linear fashion, but never falling below 80% during the term of the warranty. As a result of these warranty programs, we bear the risk of product warranty claims long after we have sold our solar modules and recognized net sales.

If any of the assumptions used in estimating our module warranties prove incorrect, we could be required to accrue additional expenses, which could adversely impact our financial position, operating results, and cash flows. Although we have taken significant precautions to avoid a manufacturing excursion from occurring, any manufacturing excursions, including any commitments made by us to take remediation actions in respect of affected modules beyond the stated remedies in our warranties, could adversely impact our reputation, financial position, operating results, and cash flows.

Although our module performance warranties extend for 25 years, our oldest solar modules manufactured during the qualification of our pilot production line have only been in use since 2001. Accordingly, our warranties are based on a variety of quality and life tests that enable predictions of durability and future performance. These predictions, however, could prove to be materially different from the actual performance during the warranty period, causing us to incur substantial expense to repair or replace defective solar modules or provide financial remuneration in the future. For example, our solar modules, including our Series 4 modules and Series 6 modules, could suffer various failure modes, including breakage, delamination, corrosion, or performance degradation in excess of expectations, and our manufacturing operations or supply chain could be subject to materials or process variations that could cause affected modules to fail or underperform compared to our expectations. These risks could be amplified as we implement design and process changes in connection with our efforts to improve our products and accelerate module wattage as part of our long-term strategic plans and as we transition to Series 6 module manufacturing. In addition, asif we increase the number of installations in extreme climates, we may experience increased failure rates due to deployment into such field conditions. Any widespread product failures may damage our market reputation, cause our net sales to decline, require us to repair or replace the defective modules or provide financial remuneration, and result in us taking voluntary remedial measures beyond those required by our standard warranty terms to enhance customer satisfaction, which could have a material adverse effect on our operating results.

In resolving claims under both the limited defect and power output warranties, we typically have the option of either repairing or replacing the covered modules or, under the limited power output warranty, providing additional modules

replacement modules. In some jurisdictions, our inability to provide compatible replacement modules could potentially expose us to liabilities beyond the limitations of our module warranties, which could adversely impact our reputation, financial position, operating results, and cash flows.

For PV solar power systems we construct,constructed for customers, we typically provide limited warranties for defects in engineering design, installation, and BoS part workmanship for a period of one to two years following the substantial completion of a system or a block within the system. In resolving claims under such BoS warranties, we have the option of remedying the defect through repair or replacement. As with our modules, these warranties are based on a variety of quality and life tests that enable predictions of durability and future performance. Any failures in BoS equipment or system construction beyond our expectations may also adversely impact our reputation, financial position, operating results, and cash flows.

In addition, our contracts with customers, including contracts for the sale of Series 6 modules, may include provisions with particular product specifications, minimum wattage requirements, and specified delivery schedules. These contracts may be terminated, or we may incur significant liquidated damages or other damages, if we fail to perform our contractual obligations. In addition, our costs to perform under these contracts may exceed our estimates, which could adversely impact our profitability. We have only recently commenced commercial production of our Series 6 modules and have limited experience satisfying our obligations under the related sales arrangements. Any failures to comply with our contracts for the sale of our modules, including our Series 6 modules, could adversely impact our reputation, financial position, operating results, and cash flows.

We need to continue to invest significant financial resources in R&D to continue to improve our module conversion efficiencies, lower the LCOE of our PV solar power systems, and otherwise keep pace with technological advances in the solar industry. However, R&D activities are inherently uncertain, and we could encounter practical difficulties in commercializing our research results. We seek to continuously improve our products and processes, including, for example, certain planned improvements to our transition to Series 6 module manufacturing capabilities, and the resulting changes carry potential risks in the form of delays, performance, additional costs, or other unintended contingencies. In addition, our significant expenditures for R&D may not produce corresponding benefits. Other companies are developing a variety of competing PV technologies, including advanced multi-crystalline silicon cells, PERC or advanced p-type crystalline silicon cells, high-efficiency n-type crystalline silicon cells, bifacial solar modules, copper indium gallium diselenide thin films, amorphous silicon thin films, and new emerging technologies such as hybrid perovskites, which could produce solar modules or systems that prove more cost-effective or have better performance than our solar modules or systems.

In addition, other companies could potentially develop a highly reliable renewable energy system that mitigates the intermittent power generation drawback of many renewable energy systems, or offer other value-added improvements from the perspective of utilities and other system owners, in which case such companies could compete with us even if the LCOE associated with such new systems is higher than that of our systems. As a result, our solar modules or systems may be negatively differentiated or rendered obsolete by the technological advances of our competitors, which would reduce our net sales, profitability, and/or market share. In addition, we often forward price our products and services in anticipation of future cost reductions and technology improvements, and thus, an inability to further refine our technology and execute our module technology and cost reduction roadmaps could adversely affect our operating results.

As necessary, we fund any incremental amounts for our estimated collection and recycling obligations on an annual basis based on the estimated costs of collecting and recycling covered modules, estimated rates of return on our restricted investments, and an estimated solar module life of 25 years less amounts already funded in prior years. We estimate the cost of our collection and recycling obligations based on the present value of the expected probability-weighted future cost of collecting and recycling the solar modules, which includes estimates for the cost of packaging materials; the cost of freight from the solar module installation sites to a recycling center; material, labor, and capital costs; the scale of recycling centers; and an estimated third-party profit margin and return on risk for collection and recycling services. We base these estimates on (i) our experience collecting and recycling our solar modules, (ii) the expected timing of when our solar modules will be returned for recycling, and (iii) the expected economic factors at the time the solar modules will be collected and recycled. If our estimates prove incorrect, we could be required to accrue additional expenses and could also face a significant unplanned cash burden at the time we realize our estimates are incorrect or end-usersend users return their modules, which could adversely affect our operating results. In addition, participating end-usersend users can return their modules covered under the collection and recycling program at any time. As a result, we could be required to collect and recycle covered CdTe solar modules earlier than we expect.

Protection of our proprietary processes, methods, and other technology is critical to our business. Failure to protect and monitor the use of our existing intellectual property rights could result in the loss of valuable technologies. We rely primarily on patents, trademarks, trade secrets, copyrights, and contractual restrictions to protect our intellectual property. We regularly file patent applications to protect certain inventions arising from our R&D and are currently pursuing such patent applications in various countries in accordance with our strategy for intellectual property in that jurisdiction. Our existing patents and future patents could be challenged, invalidated, circumvented, or rendered unenforceable. Our pending patent applications may not result in issued patents, or if patents are issued to us, such patents may not be sufficient to provide meaningful protection against competitors or against competitive technologies.

We also rely on unpatented proprietary manufacturing expertise, continuing technological innovation, and other trade secrets to develop and maintain our competitive position. Although we generally enter into confidentiality agreements with our associates and third parties to protect our intellectual property, such confidentiality agreements are limited in duration and could be breached and may not provide meaningful protection for our trade secrets or proprietary manufacturing expertise. Adequate remedies may not be available in the event of unauthorized use or disclosure of our trade secrets and manufacturing expertise. In addition, others may obtain knowledge of our trade secrets through independent development or legal means. The failure of our patents or confidentiality agreements to protect our processes, equipment, technology, trade secrets, and proprietary manufacturing expertise, methods, and compounds could have a material adverse effect on our business. In addition, effective patent, trademark, copyright, and trade secret protection may be unavailable or limited in some foreign countries, especially any developing countries into which we may expand our operations. In some countries, we have not applied for patent, trademark, or copyright protection.

Third parties may infringe or misappropriate our proprietary technologies or other intellectual property rights, which could have a material adverse effect on our business, financial condition, and operating results. Policing unauthorized use of proprietary technology can be difficult and expensive. Additionally, litigation may be necessary to enforce our intellectual property rights, protect our trade secrets, or determine the validity and scope of the proprietary rights of others. We cannot ensure that the outcome of such potential litigation will be in our favor, and such litigation may be costly and may divert management attention and other resources away from our business. An adverse determination in any such litigation may impair our intellectual property rights and may harm our business, prospects, and reputation. In addition, we have no insurance coverage against such litigation costs and would have to bear all costs arising from such litigation to the extent we are unable to recover them from other parties.

Some of our manufacturing equipment, including manufacturing equipment related to the production of our Series 6 modules, is customized to our production lines based on designs or specifications that we provide to equipment manufacturers, which then undertake a specialized process to manufacture the custom equipment. As a result, the equipment is not readily available from multiple vendors and would be difficult to repair or replace if it were to become delayed, damaged, or stop working. If any piece of equipment fails, production along the entire production line could be interrupted. In addition, the failure of our equipment manufacturers to supply equipment in a timely manner or on commercially reasonable terms could delay our expansion or conversion plans, otherwise disrupt our production schedule, and/or increase our manufacturing costs, all of which would adversely impact our operating results.

Our failure to obtain raw materials and components that meet our quality, quantity, and cost requirements in a timely manner could interrupt or impair our ability to manufacture our solar modules or increase our manufacturing costs. Several of our key raw materials and components are either single-sourced or sourced from a limited number of suppliers. As a result, the failure of any of our suppliers to perform could disrupt our supply chain and adversely impact our operations. In addition, some of our suppliers are smaller companies that may be unable to supply our increasing demand for raw materials and components as we expand our business. We may be unable to identify new suppliers or qualify their products for use on our production lines in a timely manner and on commercially reasonable terms. A constraint on our production may result in our inability to meet our capacity plans and/or our obligations under our customer contracts, which would have an adverse impact on our business. Additionally, reductions in our production volume may put pressure on suppliers, resulting in increased material and component costs.

A key raw material used in our module production process is a CdTe compound. Tellurium, one of the main components of CdTe, is mainly produced as a by-product of copper refining, and therefore, its supply is largely dependent upon demand for copper. Our supply of CdTe could be limited if any of our current suppliers or any of our future suppliers are unable to acquire an adequate supply of tellurium in a timely manner or at commercially reasonable prices. If our current suppliers or any of our future suppliers cannot obtain sufficient tellurium, they could substantially increase prices or be unable to perform under their contracts. Furthermore, if our competitors begin to use or increase their demand for tellurium, our requirements for tellurium increase, new applications for tellurium become available, or adverse trade laws or policies restrict our ability to obtain tellurium from foreign vendors or make doing so cost prohibitive, the supply of tellurium and related CdTe compounds could be reduced and prices could increase. As we may be unable to pass such increases in the costs of our raw materials through to our customers, a substantial increase in tellurium prices or any limitations in the supply of tellurium could adversely impact our profitability and long-term growth objectives.

If we are unable to systematically replicate our production lines over time and achieve operating metrics similar to our existing production lines, our manufacturing capacity could be substantially constrained, our manufacturing costs per watt could increase, and our growth could be limited. Such factors may result in lower net sales and lower net income than we anticipate. For instance, future production lines such as those at our manufacturing facilities in Ho Chi Minh

efficiencies, higher failure rates, and/or higher rates of degradation than solar modules from our existing production lines, and we could be unable to determine the cause of the lower operating metrics or develop and implement solutions to improve performance.

We have significant manufacturing, development, construction, sales, and marketing operations both within and outside the United States and expect to continue to expand our operations worldwide. As a result, we are subject to the legal, political, social, tax, and regulatory requirements and economic conditions of many jurisdictions.

Risks inherent to international operations include, but are not limited to, the following:

Our business in foreign markets requires us to respond to rapid changes in market conditions in these countries. Our overall success as a global business depends, in part, on our ability to succeed in differing legal, regulatory, economic, social, and political conditions. We may not be able to develop and implement policies and strategies that will be effective in each location where we do business.

Risks Related to Our Systems Business

The development and construction of solar energy generation facilities and other energy infrastructure projects involve numerous risks. We may be required to spend significant sums for land and interconnection rights, preliminary engineering, permitting, legal services, and other expenses before we can determine whether a project is feasible, economically attractive, or capable of being built. Success in developing a particular project is contingent upon, among other things:

Successful completion of a particular project may be adversely affected, delayed and/or rendered infeasible by numerous factors, including:

If we fail to complete the development of a solar energy project, fail to meet one or more agreed upon target construction milestone dates, fail to achieve system-level capacity, or fail to meet other contract terms, we may be subject to forfeiture of significant deposits under PPAs or interconnection agreements or termination of such agreements, incur significant liquidated damages, penalties, and/or other obligations under other project related agreements, and may not be able to recover our investment in the project. If we are unable to complete the development of a solar energy project, we may impair some or all of these capitalized investments, which would have an adverse impact on our net income in the period in which the loss is recognized.

In order to construct and operate our PV solar power systems, we need to acquire or lease land and rights of way, obtain interconnection rights, negotiate agreements with affected transmission systems, and obtain all necessary federal, state, county, local, and foreign approvals, licenses, and permits, as well as rights to interconnect the systems to the transmission grid and transmit energy generated from the system. We may be unable to acquire the land or lease interests needed, may not obtain or maintain satisfactory interconnection rights, may have difficulty reaching agreements with affected transmission systems and/or incur unexpected network upgrade costs, may not receive or retain the requisite approvals, permits, licenses, and interconnection and transmission rights, or may encounter other problems that could delay or prevent us from successfully constructing and operating such systems.

Many of our proposed projects are located on or require access through public lands administered by federal and state agencies pursuant to competitive public leasing and right-of-way procedures and processes. Our projects may also be located on tribal land pursuant to land agreements that must be approved by tribal governments and federal agencies. The authorization for the use, construction, and operation of systems and associated transmission facilities on federal, state, tribal, and private lands will also require the assessment and evaluation of mineral rights, private rights-of-way, and other easements; environmental, agricultural, cultural, recreational, and aesthetic impacts; and the likely mitigation of adverse impacts to these and other resources and uses. The inability to obtain the required permits and other federal, state, local, and tribal approvals, and any excessive delays in obtaining such permits and approvals due, for example, to litigation or third-party appeals, could potentially prevent us from successfully constructing and operating such systems in a timely manner and could result in the potential forfeiture of any deposit we have made with respect to a given project. Moreover, project approvals subject to project modifications and conditions, including mitigation requirements and costs, could affect the financial success of a given project. Changing regulatory requirements and the discovery of unknown site conditions could also affect the financial success of a given project.

In addition, local labor unions may increase the cost of project development in California and elsewhere. We may also be subject to labor unavailability and/or increased union labor requirements due to multiple simultaneous projects in a geographic region.

The significant decline in PV solar module prices over the last several years continues to create a challenging environment for module manufacturers, but it has also helped drive demand for solar electricity worldwide. Aided by such lower

Depending on the market opportunity, we may be at a disadvantage compared to potential system-level competitors. For example, certain of our competitors may have a stronger and/or more established localized business presence in a particular geographic region. Certain of our competitors may be larger entities that have greater financial resources and greater overall brand name recognition than we do and, as a result, may be better positioned to impact customer behavior or adapt to changes in the industry or the economy as a whole. Certain competitors may also have direct or indirect access to sovereign capital and/or other incentives, which could enable such competitors to operate at minimal or negative operating margins for sustained periods of time.

Additionally, large-scale solar systems are still in their relatively early stages of existence, and, depending on the geographic area, certain potential customers may still be in the process of educating themselves about the points of differentiation among various available providers of PV solar energy solutions, including a company’s proven overall experience and bankability, system design and optimization expertise, grid interconnection and stabilization expertise, and proven O&M capabilities. If we are unable over time to meaningfully differentiate our offerings at scale, or if available competitive pricing is prioritized over the value we believe is added through our system offerings and experience, from the viewpoint of our potential customer base, our business, financial condition, and results of operations could be adversely affected.

Other sources of power, such as natural gas-fired power plants, have historically been cheaper than the cost of solar power, and certain types of generation projects, such as natural gas-fired power plants, can deliver power on a firm basis. The inability to compete successfully against other power producers or otherwise enter into PPAs favorable to us would negatively affect our ability to develop and finance our projects and negatively impact our revenue. In addition, the availability of PPAs is dependent on utility and corporate energy procurement practices that could evolve and shift allocation of market risks over time. In addition, PPA availability and terms are a function of a number of economic,

In order to deliver electricity from our PV solar power systems to our customers, our projects generally need to connect to the transmission grid. The lack of available capacity on the transmission grid could substantially impact our projects and cause reductions in project size, delays in project implementation, increases in costs from transmission upgrades, and potential forfeitures of any deposit we have made with respect to a given project. In addition, there could be unexpected costs required to complete transmission and network upgrades that adversely impact the economic viability of our PV solar power systems. These transmission and network issues and costs, as well as issues relating to the availability of large equipment such as transformers and switchgear, could significantly impact our ability to interconnect our systems to the transmission grid, build such systems, and generate solar electricity sales.

The construction of large utility-scale solar power projects in many cases requires project financing, including non-recourse project specific debt financing in the bank loan market and institutional debt capital markets. Uncertainties exist as to whether our planned projects will be able to access the debt markets in a magnitude sufficient to finance their construction. If we, or purchasers of our projects, are unable to arrange such financing or if it is only available on unfavorable terms, we may be unable to fully execute our systems business plans. In addition, we generally expect to sell interests in our projects by raising project equity capital from tax-oriented, strategic industry, and other equity investors. Such equity sources may not be available or may only be available in insufficient amounts or on unfavorable terms, in which case our ability to sell interests in our projects may be delayed or limited, and our business, financial

condition, and results of operations may be adversely affected. Uncertainty in or adverse changes to tax policy or tax law, including the amount of ITC or accelerated depreciation, and any limitations on the value or availability to potential investors of tax incentives that benefit solar energy projects such as the ITC and accelerated depreciation deductions, as well as the reduction of the U.S. corporate income tax rate to 21% under the Tax Act (which could reduce the value of these tax related incentives) may reduce project values or negatively affect our ability to timely secure equity investment for our projects. Even if such financing sources are available, the counterparty to many of our fixed-price EPC contracts, which own the projects we are constructing, are often special purpose vehicles that do not have significant assets other than their interests in the project and have pledged all or substantially all of these assets to secure the project-related debt and certain other sources of

Solar power project development cycles, which span the time between the identification of a site location and the construction of a system, vary substantially and can take years to mature. As a result of these long project development cycles, we may need to make significant up-front investments of resources (including, for example, payments for land rights, large transmission and PPA deposits, or other payments, which may be non-refundable) in advance of the signing of EPC contracts, commencing construction, receiving cash proceeds, or recognizing any revenue. Our potential inability to enter into sales contracts with customers on favorable terms after making such upfront investments could cause us to forfeit certain nonrefundable payments or otherwise adversely affect our business and results of operations. Furthermore, we may become constrained in our ability to simultaneously fund our other business operations and these systems investments through our long project development cycles.

Our liquidity may also be adversely affected to the extent the project sales market weakens and we are unable to sell interests in our solar projects on pricing, timing, and other terms commercially acceptable to us. In such a scenario, we may choose to continue to temporarily own and operate certain solar projects for a period of time, after which interests in the projects may be sold to third parties.

We may enterhave entered into fixed-price EPC contracts in which we act as the general contractor for our customers in connection with the installation of their PV solar power systems. All essential costs are estimated at the time of entering into the EPC contract for a particular project, and these are reflected in the overall fixed-price that we charge our customers for the project. These cost estimates are preliminary and may or may not be covered by contracts between us or the subcontractors, suppliers, and other parties to the project. In addition, we require qualified, licensed subcontractors to install many of our systems. Shortages of such skilled labor could significantly delay a project or otherwise increase our costs. Should actual results prove different from our estimates (including those due to unexpected increases in inflation, commodity prices, or labor costs) or we experience delays in execution and we are unable to commensurately increase the EPC sales price, we may not achieve our expected margins or we may be required to record a loss in the relevant period.

We may provide ongoing O&M services to system owners under separate service agreements, pursuant to which we generally perform standard activities associated with operating a PV solar power system, including 24/7 monitoring and control, compliance activities, energy forecasting, and scheduled and unscheduled maintenance. Our costs to perform these services are estimated at the time of entering into the O&M agreement for a particular project, and these are reflected in the price we charge our customers, including certain agreements which feature fixed pricing. Should our estimates of O&M costs prove inaccurate (including any unexpected serial defects, unavailability of parts, or increases in inflation, labor, or BoS costs), our growth strategy and results of operations could be adversely affected. Because of the potentially long-term nature of these O&M agreements, the adverse impacts on our results of operations could be significant, particularly ifup to our costs are notlimitation of liability capped under the terms of the agreements. In addition, certain of our O&M agreements include provisions permitting the counterparty to terminate the agreement without cause or for convenience. The exercise of such termination rights, or the use of such rights as leverage to re-negotiate terms and conditions of an O&M agreement, including pricing terms, could adversely impact our results of operations. We may also be subject to substantial costs in the event we do not achieve certain thresholds under the effective availability guarantees included in our O&M agreements.

The ongoing O&M services that we provide for system owners may subject us to regulation by the NERC, or its designated regional representative, as a “generator operator,” or “GOP,” under electric reliability rules filed with FERC. Our failure to comply with the reliability rules applicable to GOPs could subject us to substantial fines by NERC, subject to FERC’s review. In addition, the system owners that receive our O&M services may be regulated by NERC as “generator owners,” or “GOs,” and we may incur liability for GO violations and fines levied by NERC, subject to FERC’s review, based on the terms of our O&M agreements. Finally, as a system owner and operator, we may in the future be subject to regulation by NERC as a GO.

Risks Related to Regulations

The market for electricity generation products is heavily influenced by federal, state, local, and foreign government regulations and policies concerning the electric utility industry, as well as policies promulgated by electric utilities. These regulations and policies often relate to electricity pricing and interconnection of customer-owned electricity generation. In the United States and in a number of other countries, these regulations and policies have been modified in the past and may be modified again in the future. These regulations and policies could deter end-user purchases of PV solar products or systems and investment in the R&D of PV solar technology. For example, without a mandated regulatory exception for PV solar power systems, system owners are often charged interconnection or standby fees for putting distributed power generation on the electric utility grid. To the extent these interconnection standby fees are applicable to PV solar power systems, it is likely that they would increase the cost of such systems, which could make the systems less desirable, thereby adversely affecting our business, financial condition, and results of operations. In addition, with respect to utilities that utilize a peak-hour pricing policy or time-of-use pricing methods whereby the price of electricity is adjusted based on electricity supply and demand, electricity generated by PV solar power systems currently benefits from competing primarily with expensive peak-hour electricity, rather than the less expensive average price of electricity. Modifications to the peak-hour pricing policies of utilities, such as to a flat rate for all times of the day, would require PV solar power systems to have lower prices in order to compete with the price of electricity from other sources, which could adversely impact our operating results.

Our modules, systems, and services are often subject to oversight and regulation in accordance with national and local ordinances relating to building codes, safety, environmental protection, utility interconnection and metering, and other matters, and tracking the requirements of individual jurisdictions is complex. Any new government regulations or utility policies pertaining to our modules, systems, or services may result in significant additional expenses to us or our customers and, as a result, could cause a significant reduction in demand for our modules, systems, or services. In addition, any regulatory compliance failure could result in significant management distraction, unplanned costs, and/or reputational damage.

The FCPA generally prohibits companies and their intermediaries from making improper payments to non-U.S. government officials for the purpose of obtaining or retaining business. Other countries in which we operate also have anti-bribery laws, some of which prohibit improper payments to government and non-government persons and entities, and others (e.g., the FCPA and the U.K. Bribery Act) extend their application to activities outside of their country of origin. Our policies mandate compliance with all applicable anti-bribery laws. We currently operate in, and may further expand into, key parts of the world that have experienced governmental corruption to some degree and, in certain circumstances, strict compliance with anti-bribery laws may conflict with local customs and practices. In addition, due to the level of regulation in our industry, our operations in certain jurisdictions, including China, India, South America, and the Middle East, require substantial government contact, either directly by us or through intermediaries over whom we have less direct control, such as subcontractors, agents, and partners (such as joint venture partners), where norms can differ from U.S. standards. Although we have implemented policies, procedures, and, in certain cases, contractual arrangements designed to facilitate compliance with these anti-bribery laws, our officers, directors, associates, subcontractors, agents, and partners may take actions in violation of our policies, procedures, contractual arrangements, and anti-bribery laws. Any such violation, even if prohibited by our policies, could subject us and such persons to criminal and/or civil penalties or other sanctions potentially by government prosecutors from more than one country, which could have a material adverse effect on our business, financial condition, cash flows, and reputation.

Our operations involve the use, handling, generation, processing, storage, transportation, and disposal of hazardous materials and are subject to extensive environmental laws and regulations at the national, state, local, and international levels. These environmental laws and regulations include those governing the discharge of pollutants into the air and water, the use, management, and disposal of hazardous materials and wastes, the cleanup of contaminated sites, and occupational health and safety. As we expand our business into foreign jurisdictions worldwide, our environmental compliance burden may continue to increase both in terms of magnitude and complexity. We have incurred and may continue to incur significant costs in complying with these laws and regulations. In addition, violations of, or liabilities under, environmental laws or permits may result in restrictions being imposed on our operating activities or in our being subject to substantial fines, penalties, criminal proceedings, third-party property damage or personal injury claims, cleanup costs, or other costs. Such solutions could also result in substantial delay or termination of projects under construction within our systems business, which could adversely impact our results of operations. While we believe we are currently in substantial compliance with applicable environmental requirements, future developments such as more aggressive enforcement policies, the implementation of new, more stringent laws and regulations, or the discovery of presently unknown environmental conditions may require expenditures that could have a material adverse effect on our business, financial condition, and results of operations.

Our solar modules contain CdTe and other semiconductor materials. Elemental cadmium and certain of its compounds are regulated as hazardous materials due to the adverse health effects that may arise from human exposure. Based on existing research, the risks of exposure to CdTe are not believed to be as serious as those relating to exposure to elemental cadmium. In our manufacturing operations, we maintain engineering controls to minimize our associates’ exposure to cadmium or cadmium compounds and require our associates who handle cadmium compounds to follow certain safety

procedures, including the use of personal protective equipment such as respirators, chemical goggles, and protective clothing. Relevant studies and third-party peer reviewreviews of our technology have concluded that the risk of exposure to cadmium or cadmium compounds from our end-products is negligible. In addition, the risk of exposure is further minimized by the encapsulated nature of these materials in our products, the physical properties of cadmium compounds used in our products, and the recycling or responsible disposal of our modules. While we believe that these factors and procedures are sufficient to protect our associates, end-users,end users, and the general public from adverse health effects that may arise from cadmium exposure, we cannot ensure that human or environmental exposure to cadmium or cadmium compounds used in our products will not occur. Any such exposure could result in future third-party claims against us, damage to our reputation, and heightened regulatory scrutiny, which could limit or impair our ability to sell and distribute our products. The occurrence of future events such as these could have a material adverse effect on our business, financial condition, and results of operations.

The use of cadmium or cadmium compounds in various products is also coming under increasingly stringent governmental regulation. Future regulation in this area could impact the manufacturing, sale, collection, and recycling of solar modules and could require us to make unforeseen environmental expenditures or limit our ability to sell and distribute our products. For example, European Union Directive 2011/65/EU on the Restriction of the Use of Hazardous Substances (“RoHS”) in electrical and electronic equipment (the “RoHS Directive”) restricts the use of certain hazardous substances, including cadmium and its compounds, in specified products. Other jurisdictions, such as China, have adopted similar legislation or are considering doing so. Currently, PV solar modules are explicitly excluded from the scope of RoHS (Article 2), as adopted by the European Parliament and the Council in June 2011. The next general review of the RoHS Directive is scheduled for 2021, involving a broader discussion of the existing scope. A scope review focusing on additional exclusions was proposed by the European Commission in 2017 under the EU’s co-decision process which allows the European Parliament and the European Council to amend the European Commission’s proposal on exclusions. The co-decision procedure was completed in 2017 and the existing exclusion of PV modules was maintained. In preparation for the next RoHS revision, the European Commission has started a number of pre-regulatory studies and assessments relating to the addition of new substances to the existing RoHS framework, as well as the revision and optimization of the exemption process. It is unclear to what extent the existing scope exclusions will be discussed or maintained in future directives. If PV modules were to be included in the scope of future RoHS revisions without an exemption or exclusion, we would be required to redesign our solar modules to reduce cadmium and other affected hazardous substances to the maximum allowable concentration thresholds in the RoHS Directive in order to continue to offer them for sale within the EU. As such actions would be impractical, this type of regulatory development would effectively close the EU market to us, which could have a material adverse effect on our business, financial condition, and results of operations.

As an owner and operator of PV solar power systems that deliver electricity to the grid, certain of our affiliated entities may be considered public utilities for purposes of the Federal Power Act, as amended (the “FPA”), and public utility companies for purposes of the Public Utility Holding Company Act of 2005 (“PUHCA 2005”), and are subject to regulation by the FERC, as well as various local and state regulatory bodies. Some of our affiliated entities may be exempt wholesale generators or qualifying facilities under the Public Utility Regulatory Policies Act of 1978, as amended (“PURPA”), and as such are exempt from regulation under PUHCA 2005. In addition, our affiliated entities may be exempt from most provisions of the FPA, as well as state laws regarding the financial or organizational regulation of public utilities. We are not directly subject to FERC regulation under the FPA. However, we are considered to be a “holding company” for purposes of Section 203 of the FPA, which regulates certain transactions involving public utilities, and such regulation could adversely affect our ability to grow the business through acquisitions. Likewise, investors seeking to acquire our public utility subsidiaries or acquire ownership interests in our securities sufficient to give them control over us and our public utility subsidiaries may require prior FERC approval to do so. Such approval could result in transaction delays or uncertainties.

Public utilities under the FPA are required to obtain FERC acceptance of their rate schedules for wholesale sales of electricity and to comply with various regulations. The FERC may grant our affiliated entities the authority to sell electricity at market-based rates and may also grant them certain regulatory waivers, such as waivers from compliance with FERC’s accounting regulations. These FERC orders reserve the right to revoke or revise market-based sales authority if the FERC subsequently determines that our affiliated entities can exercise market power in the sale of generation products, the provision of transmission services, or if it finds that any of the entities can create barriers to entry by competitors. In addition, if the entities fail to comply with certain reporting obligations, the FERC may revoke their power sales tariffs. Finally, if the entities were deemed to have engaged in manipulative or deceptive practices concerning their power sales transactions, they would be subject to potential fines, disgorgement of profits, and/or suspension or revocation of their market-based rate authority. If our affiliated entities were to lose their market-based rate authority, such companies would be required to obtain the FERC’s acceptance of a cost-of-service rate schedule and could become subject to the accounting, record-keeping, and reporting requirements that are imposed on utilities with cost-based rate schedules, which would impose cost and compliance burdens on us and have an adverse effect on our results of operations. In addition to the risks described above, we may be subject to additional regulatory regimes at state or foreign levels to the extent we own and operate PV solar power systems in such jurisdictions.

From time to time, we are subject to legal claims, with and without merit, that may be costly and which may divert the attention of our management and our resources in general. In addition, our projects may be subject to litigation or other adverse proceedings that may adversely impact our ability to proceed with construction or sell a given project. The results of complex legal proceedings are difficult to predict. Moreover, many of the complaints filed against us do not specify the amount of damages that plaintiffs seek, and we therefore are unable to estimate the possible range of damages that might be incurred should these lawsuits be resolved against us. Even if we are able to estimate losses related to these actions, the ultimate amount of loss may be materially higher than our estimates. Certain of these lawsuits assert types of claims that, if resolved against us, could give rise to substantial damages, and an unfavorable outcome or settlement of one or more of these lawsuits, or any future lawsuits, may result in a significant monetary judgment or award against us or a significant monetary payment by us, and could have a material adverse effect on our business, financial condition, or results of operations. Even if these lawsuits, or any future lawsuits, are not resolved against us, the costs of defending such lawsuits and of any settlement may be significant. These costs may exceed the dollar limits of our insurance policies or may not be covered at all by our insurance policies. Because the price of our common stock has been, and may continue to be, volatile, we can provide no assurance that additional securities or other litigation will not be filed against us in the future. See Note 15.14. “Commitments and Contingencies – Legal Proceedings” to our consolidated financial statements for more information on our legal proceedings, including our securities class action and derivative actions.

We have made several acquisitions in prior years and in the future we may acquire additional companies, project pipelines, products, equity interests, or technologies or enter into joint ventures or other strategic initiatives. We may not realize the anticipated benefits of such business combinations or acquisitions, and each transaction has numerous risks, which may include the following:

Mergers and acquisitions of companies are inherently risky, and ultimately, if we do not complete the integration of acquired businesses successfully and in a timely manner, we may not realize the anticipated benefits of the acquisitions to the extent anticipated, which could adversely affect our business, financial condition, or results of operations. In addition, we may seek to dispose of our interests in acquired companies, project pipelines, products, or technologies. We may not recover our initial investment in such interests, in part or at all, which could adversely affect our business, financial condition, or results of operations.

We are dependent on the services of our executive officers and other members of our senior management team. The loss of one or more of these key associates or any other member of our senior management team could have a material adverse effect on our business. We may not be able to retain or replace these key associates and may not have adequate succession plans in place. Several of our current key associates including our executive officers are subject to employment conditions or arrangements that contain post-employment non-competition provisions. However, these arrangements permit the associates to terminate their employment with us upon little or no notice.

Our future success depends, to a significant extent, on our ability to attract, train, and retain management, operations, sales, training, and technical personnel, including personnel in foreign jurisdictions. Recruiting and retaining capable personnel, particularly those with expertise in the PV solar industry across a variety of technologies, are vital to our success. There is substantial competition for qualified technical personnel, and while we continue to benchmark our organization against the broad spectrum of business in our market space to remain economically competitive, there can be no assurances that we will be able to attract and retain our technical personnel. If we are unable to attract and retain qualified associates, or otherwise experience unexpected labor disruptions within our business, we may be materially and adversely affected.

Our success depends largely on our ability to use and develop our technology and know-how without infringing or misappropriating the intellectual property rights of third parties. The validity and scope of claims relating to PV solar technology patents involve complex scientific, legal, and factual considerations and analysis and, therefore, may be highly uncertain. We may be subject to litigation involving claims of patent infringement or violation of intellectual property rights of third parties. The defense and prosecution of intellectual property suits, patent opposition proceedings, and related legal and administrative proceedings can be both costly and time consuming and may significantly divert the efforts and resources of our technical and management personnel. An adverse determination in any such litigation or proceedings to which we may become a party could subject us to significant liability to third parties, require us to seek licenses from third parties, which may not be available on reasonable terms, or at all, or pay ongoing royalties, require us to redesign our solar modules, or subject us to injunctions prohibiting the manufacture and sale of our solar modules or the use of our technologies. Protracted litigation could also result in our customers or potential customers deferring or limiting their purchase or use of our solar modules until the resolution of such litigation.

Although our reporting currency is the U.S. dollar, we conduct certain business and incur costs in the local currency of most countries in which we operate. As a result, we are subject to currency translation and transaction risk. For example, certain of our net sales in 20182019 were denominated in foreign currencies, such as Japanese yenAustralian dollar and Indian rupees,Euro, and we expect to continue to have net sales denominated in foreign currencies in the future. Joint ventures or other business arrangements with strategic partners outside of the United States have involved, and in the future may involve, significant investments denominated in local currencies. Changes in exchange rates between foreign currencies and the U.S. dollar could affect our results of operations and result in exchange gains or losses. We cannot accurately predict the impact of future exchange rate fluctuations on our results of operations.

We could also expand our business into emerging markets, many of which have an uncertain regulatory environment relating to currency policy. Conducting business in such emerging markets could cause our exposure to changes in exchange rates to increase, due to the relatively high volatility associated with emerging market currencies and potentially longer payment terms for our proceeds.

Our ability to hedge foreign currency exposure is dependent on our credit profile with the banks that are willing and able to do business with us. Deterioration in our credit position or a significant tightening of the credit market conditions could limit our ability to hedge our foreign currency exposures; and therefore, result in exchange gains or losses.

Our largest stockholder, Lukas T. Walton (the “Significant Stockholder”), owned approximately 21% of our outstanding common stock as of December 31, 2018.2019. As a result, the Significant Stockholder has substantial influence over all matters requiring stockholder approval, including the election of our directors and the approval of significant corporate transactions such as mergers, tender offers, and the sale of all or substantially all of our assets. The interests of the Significant Stockholder could conflict with or differ from interests of other stockholders. For example, the concentration of ownership held by the Significant Stockholder could delay, defer, or prevent a change of control of our company or impede a merger, takeover, or other business combination, which other stockholders may view favorably.

We may be required to record significant charges to earnings should we determine that our long-lived assets or project related assets are impaired. Such charges may have a material impact on our financial position and results of operations. We review long-lived and project related assets for impairment whenever events or changes in circumstances indicate that the carrying amount of such assets may not be recoverable. We consider a project commercially viable or recoverable if it is anticipated to be sold for a profit once it is either fully developed or fully constructed or if the expected operating cash flows from future power generation exceed the cost basis of the asset. If our projects are not considered commercially viable, we would be required to impair the respective assets.

We are subject to income taxes in the jurisdictions in which we operate. In December 2017, the United States enacted the Tax Act. The changes included in the Tax Act are broad and complex, and the final effects of the Tax Act may differ from the amounts provided elsewhere in this Annual Report on Form 10-K, possibly materially, due to, among other things, changes in regulations related to the Tax Act, any legislative action to address questions that arise because of the Tax Act, any changes in accounting standards for income taxes or related interpretations in response to the Tax Act, or actions we may take as a result of the Tax Act. Additionally, longstanding international tax laws that determine each country’s jurisdictional tax rights in cross-border international trade continue to evolve as a result of the base erosion and profit shifting reporting requirements recommended by the OECD. As these and other tax laws and regulations change, our business, financial condition, and results of operations could be adversely affected.

We are subject to potential tax examinations in various jurisdictions, and taxing authorities may disagree with our interpretations of U.S. and foreign tax laws and may assess additional taxes. We regularly assess the likely outcomes of these examinations in order to determine the appropriateness of our tax provision; however, the outcome of tax examinations cannot be predicted with certainty. Therefore, the amounts ultimately paid upon resolution of such examinations could be materially different from the amounts previously included in our income tax provision, which could have a material impact on our results of operations and cash flows.

In addition, our future effective tax rate could be adversely affected by changes to our operating structure, losses of tax holidays, changes in the jurisdictional mix of earnings among countries with tax holidays or differing statutory tax rates, changes in the valuation of deferred tax assets and liabilities, changes in tax laws, and the discovery of new information in the course of our tax return preparation process. Any changes in our effective tax rate may materially and adversely impact our results of operations.

Our operations rely on our computer systems, hardware, software, and networks, as well as those of third parties with which we do business, to securely process, store, and transmit proprietary, confidential, and other information, including intellectual property. We also rely heavily on these information systems to operate our manufacturing lines and PV solar power plants. These information systems may be compromised by cyber-attacks, computer viruses, and other events that could be materially disruptive to our business operations and could put the security of our information, and that of the third parties with which we do business, at risk of misappropriation or destruction. In recent years, such cyber incidents have become increasingly frequent and sophisticated, targeting or otherwise affecting a wide range of companies. While we have instituted security measures to minimize the likelihood and impact of a cyber incident, there is no assurance that these measures, or those of the third parties with which we do business, will be adequate in the future. If these measures fail, valuable information may be lost; our manufacturing, development, construction, O&M, and other operations may be disrupted; we may be unable to fulfill our customer obligations; and our reputation may suffer. For example, any cyber incident affecting our automated manufacturing lines could adversely affect our ability to produce solar modules or otherwise affect the quality and performance of the modules produced. We may also be subject to litigation, regulatory action, remedial expenses, and financial losses beyond the scope or limits of our insurance coverage. These consequences of a failure of security measures could, individually or in the aggregate, have a material adverse effect on our business, financial condition, and results of operations.

Personal privacy and data security have become significant issues in the United States, Europe, and in many other jurisdictions in which we operate. The regulatory framework for privacy and security issues worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future. Furthermore, federal, state, or foreign government bodies or agencies have in the past adopted, and may in the future adopt, laws and regulations affecting data privacy, all of which may be subject to invalidation by relevant foreign judicial bodies. Industry organizations also regularly adopt and advocate for new standards in this area.

In the United States, these include rules and regulations promulgated or pending under the authority of federal agencies, state attorneys general, legislatures, and consumer protection agencies. Internationally, many jurisdictions in which we operate have established their own data security and privacy legal framework with which we, relevant suppliers, and customers must comply. For example, the General Data Protection Regulation, a broad-based data privacy regime enacted by the European Parliament, which became effective in May 2018, imposes new requirements on how we collect, process, transfer, and store personal data, and also imposes additional obligations, potential penalties, and risk upon our business. Additionally, the California Consumer Privacy Act, which becomes effective in January 2020, imposes similar data privacy requirements. In many jurisdictions, enforcement actions and consequences for noncompliance are also rising. In addition to government regulation, privacy advocates and industry groups may propose new and different self-regulatory standards that either legally or contractually apply to us. Although we have implemented policies, procedures, and, in certain cases, contractual arrangements designed to facilitate compliance with applicable privacy and data security laws and standards, any inability or perceived inability to adequately address privacy and security concerns, even if unfounded, or comply with applicable privacy and data security laws, regulations, and policies, could result in additional fines, costs, and liabilities to us, damage our reputation, inhibit sales, and adversely affect our business.

We may be unable to respond to changes in business and economic conditions, engage in transactions that might otherwise be beneficial to us, and obtain additional financing, if needed, because the senior secured credit facility made available under our amended and restated credit agreement with several financial institutions as lenders and JPMorgan Chase Bank, N.A. as administrative agent (the “Revolving Credit Facility”) and certain of our project financing

arrangements contain, and other future debt agreements may contain, covenant restrictions that limit our ability to, among other things:

Under our Revolving Credit Facility and certain of our project financing arrangements, we are also subject to certain financial covenants. Our ability to comply with covenants under our credit agreements is dependent on our future performance or the performance of specifically financed projects, which will be subject to many factors, some of which are beyond our control, including prevailing economic conditions. In addition, our failure to comply with these covenants could result in a default under these agreements and any of our other future debt agreements, which if not cured or waived, could permit the holders thereof to accelerate such debt and could cause cross-defaults under our other facility agreements and the possible acceleration of debt under such agreements, as well as cross-defaults under certain of our key project and operational agreements and could also result in requirements to post additional security instruments to secure future obligations. In addition, certain events that occur within the Company, or in the industry or the economy as a whole, may constitute material adverse effects under these agreements. If it is determined that a material adverse effect has occurred, the lenders can, under certain circumstances, restrict future borrowings or accelerate the due date of outstanding amounts. If any of our debt is accelerated, we may not have sufficient funds available to repay such debt and may experience cross-defaults under our other debt or operational agreements, which could materially and adversely affect our business, financial condition, and results of operations.

None.

As of December 31, 2018,2019, our principal properties consisted of the following:

See Note 15.14. “Commitments and Contingencies – Legal Proceedings” to our consolidated financial statements for information regarding legal proceedings and related matters.

None.

Our common stock is listed on The Nasdaq Stock Market LLC under the symbol FSLR.

As of February 15, 2019,14, 2020, there were 4846 record holders of our common stock, which does not reflect beneficial owners of our shares.

We have never paid and do not expect to pay dividends on our common stock for the foreseeable future. Furthermore, our Revolving Credit Facility imposes restrictions on our ability to declare or pay dividends. The declaration and payment of dividends is subject to the discretion of our board of directors and depends on various factors, including our net income, financial condition, cash requirements, and future prospects as well as the restrictions under our Revolving Credit Facility and other factors considered relevant by our board of directors. We expect to prioritize our working capital requirements, capacity expansion and other capital expenditure needs, project development and construction, and merger and acquisition opportunities prior to returning capital to our shareholders.

Among First Solar, the S&P 500 Index,

and the Invesco Solar ETF**ETF

None.

None.

The following tables set forth our selected financial data for the periods and at the dates indicated. The selected financial data from the consolidated statements of operations and consolidated statements of cash flows for the years ended December 31, 2019, 2018, 2017, and 20162017 and the selected financial data from the consolidated balance sheets as of December 31, 20182019 and 20172018 have been derived from the audited consolidated financial statements included in this Annual Report on Form 10-K. The selected financial data from the consolidated statements of operations and consolidated statements of cash flows for the years ended December 31, 20152016 and 20142015 and the selected financial data from the consolidated balance sheets as of December 31, 2017, 2016, 2015, and 20142015 have been derived from audited consolidated financial statements not included in this Annual Report on Form 10-K. The information presented below should also be read in conjunction with our consolidated financial statements and the related notes thereto and Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”