TABLE OF CONTENTS

​

​

​

This Annual Report on Form 10-K contains statements that constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, each as amended. All statements other than statements of historical fact, including statements regarding market and industry prospects and future results of operations or financial position, made in this Annual Report on Form 10-K are forward-looking. In many cases, you can identify forward-looking statements by terminology, such as “may”, “should”, “expects”, “intends”, “plans”, “anticipates”, “believes”, “estimates”, “predicts”, “potential” or “continue” or the negative of such terms and other comparable terminology. The forward-looking information may include, among other information, statements concerning the Company’s outlook for fiscal year 2024 and beyond, overall volume and pricing trends, cost reduction strategies and their anticipated results, market and industry trends, capital expenditures, expected borrowings under the Company’s revolving credit facility and dividends.  There may also be other statements of expectations, beliefs, future plans and strategies, anticipated events or trends and similar expressions concerning matters that are not historical facts. Readers are cautioned that any such forward-looking statements are not guarantees of future performance and involve risks and uncertainties, many of which are difficult to predict and are generally outside the Company’s control, that could cause actual results to differ materially from those expressed in, or implied or projected by, the forward-looking statements.  These risks and uncertainties include, without limitation, those risks set forth in Part I, Item 1A, “Risk Factors” in this Annual Report on Form 10-K.

The Company has based these forward-looking statements on its current expectations and projections about future events.  Although the Company believes that the assumptions on which the forward-looking statements contained herein are based are reasonable, any of those assumptions could prove to be inaccurate. As a result, the forward-looking statements based upon those assumptions also could be incorrect.

Except to the extent required by law, the Company undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

​

Part I

Item 1.  Business

Overview

Haynes International, Inc. (“Haynes”, “the Company”, “we”, “our” or “us”) is one of the world’s largest developers, producers, and distributors of technologically advanced high-performance nickel- and cobalt-based alloys.  The Company’s products, which are sold primarily into the aerospace, chemical processing and industrial gas turbine industries, consist of high-temperature resistant alloys, or (“HTA”) products, and corrosion-resistant alloys, or (“CRA”) products. HTA products are used by manufacturers of equipment that is subjected to extremely high temperatures, such as jet engines for the aerospace market, gas turbine engines used for power generation and industrial heating equipment. CRA products are used in applications that require resistance to very corrosive media found in chemical processing, power plant emissions control and waste treatment. Haynes high-performance alloy sales in sheet, coil and plate forms, in the aggregate, represented approximately 64% of net product revenues in fiscal 2023. The Company also produces its products as seamless and welded tubulars, which represented approximately 12% of fiscal 2023 net product revenues and in wire form, which represented approximately 6% of fiscal 2023 net product revenues and in slab, bar and billet form which, in the aggregate, represented approximately 18% of fiscal 2023 net product revenues.

The Company has manufacturing facilities in Kokomo, Indiana; Arcadia, Louisiana; and Mountain Home, North Carolina. The Kokomo facility specializes in flat products, the Arcadia facility specializes in tubular products, and the Mountain Home facility specializes in wire and small diameter bar products. The Company’s products are sold primarily through its direct sales organization, which includes 11 service and/or sales centers in the United States, Europe and Asia. All of these centers are Company-operated. In fiscal 2023, approximately 75% of the Company’s net revenue was generated by its direct sales organization, and the remaining 25% was generated by a network of independent distributors, resellers and sales agents that supplement the Company’s direct sales efforts primarily in the United States, Europe and Asia, some of whom have been associated with the Company for over 30 years.

A key strength of the Company is innovation through developing new alloys and developing new applications for its new and existing alloys.  This strength combined with our unique business model that utilizes both the mill and Company-owned service centers provides exceptional customer service with short lead times, smaller quantities and value-add cutting operations.  The Company has leveraged these strengths with a focused strategy of providing high-value differentiated products and services, and realizing variable cost reductions.  This has resulted in a 25% reduction in our volume breakeven point, which provides incremental margin strength as volumes rise.

Business Strategy

The Company’s strategy is pursued within the overarching goal of safety, which continues to be the Company’s core priority. Its approach to safety includes providing leadership on awareness, communication, accountability, and process change. In addition to its ongoing focus on safety, the Company seeks to continue to improve its business performance, which includes providing high-value differentiated products and services, and pricing for that value. This is combined with pursuing reduced costs, including yield and process improvements, with the result being expansion of its gross margin percentage and a significant reduction in its breakeven point.

The Company’s performance business metrics have improved significantly versus historical periods, including a 25% reduction in its volume breakeven point from roughly 5 million pounds shipped to 3.7 million pounds shipped per quarter with the current product mix. This lower breakeven point has enabled the Company to capitalize on increasing volumes shipped which has resulted in the improvement of our gross margin as a percentage of sales.

While maintaining this improvement focus, the Company continues to evaluate new opportunities and applications for its products, particularly in its core markets of aerospace, chemical processing and industrial gas turbines, but also in the areas of renewable clean energy sources and other developing technologies relating to environmental and climate change issues. These opportunities include new generation jet engines with better fuel efficiency and fewer emissions, as well as the use or consideration for use of HAYNES^® alloys in advanced ultra-

supercritical power plants, concentrated solar power, fuel cells, molten salt nuclear reactors, waste-to-energy, hydrogen production, and use of supercritical-CO₂ power cycles for energy generation.  Innovation is a foundational strength of the Company.

The following provides further discussion on certain focus initiatives that are core to this strategy.

Developing new applications for its new and existing alloys is also a key strength and strategy of the Company. The Company leverages its technical expertise to develop unique applications for its products, especially proprietary and specialty alloys that can yield higher margins. These new applications, including use in unique special projects and new programs, are an important part of the Company’s growth and profitability strategy.

Through the development of new alloys and new applications, the Company is seeking to participate in additional markets with new revenue streams beyond the core markets of aerospace, chemical processing and industrial gas turbines. The Company believes that medical/pharmaceutical, consumer electronics, petrochemical and emerging technologies such as renewable and clean energy, hydrogen production and next-generation nuclear power generation all present possible growth opportunities for its products.

Products

The global specialty alloy market includes stainless steel, titanium alloys, general-purpose nickel alloys and high-performance nickel- and cobalt-based alloys. The Company believes that the high-performance alloy sector represents less than 10% of the total specialty alloy market. The Company competes primarily in the high-performance nickel- and cobalt-based alloy sectors, which includes HTA products and CRA products. In fiscal 2021, 2022 and 2023, HTA products accounted for approximately 75%, 79% and 85%, respectively, of the Company’s net revenues, and sales of the Company’s CRA products accounted for approximately 25%, 21% and 15%, respectively, of the Company’s net revenues.  These percentages are based on data which include revenue associated with sales by the Company to its foreign subsidiaries, but exclude revenue associated with sales by foreign subsidiaries to their customers. Management believes, however, that the effect of including revenue data associated with sales by its foreign subsidiaries would not materially change the percentages presented in this section.

High-temperature Resistant Alloys.  HTA products are used primarily in manufacturing components for the hot sections of gas turbine engines. Stringent safety and performance standards in the aerospace industry result in development lead times typically as long as eight to ten years in the introduction of new aerospace-related market applications for HTA products. However, once a particular new alloy is shown to possess the properties required for a specific application in the aerospace market, it tends to remain in use for extended periods. HTA products are also used in gas turbine engines produced for use in applications such as naval and commercial vessels, electric power generation, power sources for offshore drilling platforms, gas pipeline booster stations and emergency standby power generators.   Our HTA products offer excellent resistance to oxidation, sulfidation, metal dusting, and other high-temperature degradation modes. As such, the Company expects our HTA products to be relevant in emerging technologies for lowering carbon footprints, while chemical, petrochemical, and several other industries could also create additional long-term growth opportunities.

Corrosion-resistant Alloys.  CRA products are used in a variety of applications, such as chemical and petrochemical processing, power plant emissions control, hazardous waste treatment, sour gas production and pharmaceutical vessels. Historically, the chemical processing market has represented the largest end-user sector for CRA products. The Company believes the chemical processing market continues to represent an area of potential long-term growth since CRA product purchases can be driven by reoccurring maintenance, a need to improve safety, and a need to improve environmental protections by minimizing alloy degradation. Moreover, the Company also sees the availability of abundant natural gas as a feedstock for chemicals as a potential for long term growth for our CRA products. In addition to the use of CRA products in the chemical and petrochemical processing industry, the Company has seen an increased demand for some of these alloys in applications such as gas-to-liquid and synthetic gas operations. Higher operating temperatures and harsher environmental conditions can improve efficiency in certain applications and, consequently, high-temperature, corrosion-resistant alloys are used to enable these technologies.  Unlike aerospace applications within the HTA product market, the development of new market applications for CRA products generally does not require long lead times.

Material Resources

Patents and Trademarks

The Company currently maintains a total of approximately 17 published U.S. patents and applications and approximately 227 foreign counterpart patents and applications targeted at countries with significant or potential markets for the patented products. Since fiscal 2003, the Company’s technical programs have yielded nine new proprietary alloys. The alloys being commercialized saw significant further advancement in the process during fiscal 2021, 2022 and 2023.

The Company will continue to develop and actively promote new alloys through customer engineering visits, technical presentations, and publication of technical papers for industry and academia.

In the aerospace, industrial gas turbine, and other high temperature alloys markets one of the alloys that has already seen significant commercial success is HAYNES^® 282^® alloy. This alloy has an excellent combination of high temperature strength, formability and fabricability. There have been a significant number of customer tests and evaluations of this product for the hot sections of gas turbines in the aerospace and industrial gas turbine markets, and for other high temperature applications. The alloy is specified into major aerospace and industrial gas turbine applications, as well as for certain high temperature components in the automotive and industrial applications.  The American Society of Mechanical Engineers (“ASME”) code case for this alloy was approved in fiscal 2021. The code case will help further expand the use of the alloy into pressure vessel and boiler applications requiring ASME approvals. Another new alloy for use in the aerospace and industrial gas turbine markets is HAYNES^® 244^® alloy. It combines high strength to 1400 degrees Fahrenheit with a low coefficient of thermal expansion.  Commercialization is ongoing for this alloy, and it has been specified into certain aerospace engine programs and is being evaluated on others.

Our customers in the chemical processing industry and corrosion resistance alloys markets have extensive applications for HASTELLOY^® G-35^® alloy, particularly in wet phosphoric acid production. Commercialization is ongoing for HASTELLOY^® HYBRID-BC1^® alloy. HYBRID-BC1^® alloy is a CRA product with applications in the chemical processing and petrochemical industries that has demonstrated resistance to hydrochloric and sulfuric acids as well as several organic acids. Most recently the alloy has found applications in agrichemical and refinery industries, as well as chemical processing applications that are growing as a result of the manufacturing of electric vehicle batteries. These applications are further expanding the use of the alloy. Management expects demand for these specialty and proprietary alloys will continue to grow in chemical processing and other markets.

In the oil and gas industry, HASTELLOY^® C-22HS^® alloy has found multiple applications. Commercialization of this alloy continues, as is the testing, evaluation, and promotion of this alloy with special emphasis on applications for this industry.

In addition to the successful commercialization of the above alloys, the Company continues to develop applications for three new alloys which are still being scaled up at the mill and are in the early stages of the commercialization process. HAYNES® HR-224® alloy is an HTA product with superior resistance to oxidation and excellent fabricability, and is being assessed in certain current and emerging technology applications. HAYNES® HR-235® alloy has excellent resistance to metal dusting in high temperature carbonaceous environments. Good progress in developing new applications for the alloy for petrochemical and syngas production applications has been made this past fiscal year. Most recently, HAYNES® 233^® alloy was introduced to provide excellent oxidation resistance coupled with superior creep strength at temperatures to 2100°F or higher. The Company believes this combination of properties has not been previously achieved in a readily fabricable alloy. Commercialization for this alloy is ongoing and significant progress has been made over the past year in developing applications for this new alloy in aerospace, industrial gas turbines, power generation and other high temperature applications.

Patents or other proprietary rights are an important element of the Company’s business. The Company’s strategy is to file patent applications in the U.S. and any other country that represents an important commercial market. In addition, the Company seeks to protect technology that is important to the development of the Company’s business. The Company also relies upon trade secret rights to protect its technologies and its development of new processes, applications and alloys. The Company protects its trade secrets in part through confidentiality and proprietary information agreements with its customers and employees. Trademarks on the names of many of the Company’s alloys have also been applied for or granted in the U.S. and certain foreign countries.

While the Company believes its patents are important to its competitive position, significant barriers to entry may exist beyond the expiration of any patent period. These barriers to entry include the unique equipment required to produce these materials and the exacting processes required to achieve the desired metallurgical properties. These processing requirements include optimal melting and thermo-mechanical processing parameters for each alloy. Management believes that the current alloy development programs and these barriers to entry reduce the impact of patent expirations on the Company.

Raw Materials

Raw materials represented an estimated 48% of cost of sales in fiscal 2023. Nickel, a major component of many of the Company’s products, accounted for approximately 43% of raw material costs, or approximately 21% of total cost of sales in fiscal 2023.  Other key raw materials include cobalt, chromium, molybdenum and tungsten. Melt materials consist of virgin raw material, purchased scrap and internally produced scrap.

The average nickel prices per pound for cash buyers for the 30-day periods ended on September 30, 2021, 2022 and 2023, as reported by the London Metals Exchange, were $8.80, $10.28 and $8.90, respectively. Prices for certain other raw materials that are significant in the manufacture of the Company’s products, such as cobalt and chromium, were lower in fiscal 2023 compared to fiscal 2022, while molybdenum was higher in fiscal 2023 compared to fiscal 2022.

The Company’s business model includes mill manufacturing and global distribution facilities, which create a long working capital cycle and contribute to a long position as it relates to commodity price risk, especially for product sold out of distribution facility inventory at spot prices.  In addition, the type of high-performance products the Company produces require multiple production steps to create the final yielded product that is sold to the customer.  These refining steps generate high revert scrap pounds that are recycled back through the melt at metal value.  This scrap cycle also contributes to a long position as it relates to commodity price risk.

Although alternative sources of supply are available, the Company currently purchases nickel through an exclusive arrangement with a single supplier to ensure consistent quality and supply. The Company purchases raw materials through various arrangements including fixed-term contracts and spot purchases, which involve a variety of pricing mechanisms. In cases where the Company prices its products at the time of order placement, the Company attempts to establish selling prices with reference to known costs of materials, thereby reducing the risk associated with changes in the cost of raw materials. However, to the extent that the price of nickel fluctuates rapidly, there may be a favorable or unfavorable effect on the Company’s gross profit margins. The Company periodically purchases material forward with certain suppliers in connection with fixed price agreements with customers.

The Company values inventory utilizing the first-in, first-out (“FIFO”) inventory costing methodology. Under the FIFO inventory costing method, the cost of materials included in cost of sales may be different from the current market price at the time of sale of finished product due to the length of time from the acquisition of the raw material to the sale of the finished product. In a period of decreasing raw material costs, the FIFO inventory valuation method normally results in higher costs of sales as compared to the last-in, first out method. Conversely, in a period of rising raw material costs, the FIFO inventory valuation method normally results in lower costs of sales as compared to the last-in, first out method.

End Markets

The global specialty alloy market includes stainless steels, titanium alloys, general purpose nickel alloys and high-performance nickel- and cobalt-based alloys. Of this total market, the Company competes primarily in the high-performance nickel- and cobalt-based alloy sectors which require highly specialized alloys that can meet the demanding materials’ needs of the applications in the high growth markets such as Aerospace, CPI, IGT, Emerging Technologies, to name a few. Compared to the stainless steels and general-purpose nickel alloys markets, the Company believes that the high-performance alloy sector provides greater growth potential and opportunities for higher price differentiation and profit margins. This is due to the technologically demanding nature of the applications, products, strict customer requirements and higher-growth end markets.

The Company believes it is an industry leader in developing new alloys to meet its customers’ specialized and demanding requirements. The Company continues to work closely with customers and end users of its products to identify opportunities to develop and manufacture new high-performance alloys. The Company’s technical programs have yielded many new proprietary alloys with multiple applications, an accomplishment that the Company believes distinguishes it from its competitors.

Developing new applications for its new and existing alloys is also a key strength and strategy of the Company. The Company leverages its technical expertise to develop unique applications for its products, especially proprietary and

specialty alloys that can yield higher margins. These new applications, including use in unique special projects and new programs, are an important part of the Company’s growth and profitability strategy.

Aerospace.  The Company has manufactured HTA products for the aerospace market since the late 1930s and has developed numerous proprietary alloys for this market. Customers in the aerospace market tend to be the most demanding with respect to meeting specification requirements, precise tolerances and achieving new product performance standards. Stringent safety standards and continuous efforts to reduce equipment weight, reduce emissions, and develop more fuel-efficient designs require close coordination among the Company, the aero-engine original equipment manufacturer (“OEMs”), and their customers in the selection and development of HTA products. As a result, sales to aerospace customers tend to be made through the Company’s direct sales force. Demand for the Company’s products in the aerospace market is based on the new and replacement market for jet engines and the maintenance needs of operators of commercial and military aircraft. The Company’s HTA products are used for static components in the hot sections of aircraft engines. The hot sections are subjected to substantial wear and tear and require periodic maintenance, repair and overhaul. The Company views the maintenance, repair and overhaul (“MRO”) business as an area of continuing long-term growth. The Company is aware of decarbonization efforts by the aviation industry, which involves improved operational efficiency, the use of sustainable aviation fuel (“SAF”) and hydrogen as a fuel source for the next-generation engines. The Company believes this may be a growth area as aero engines run hotter and in harsher conditions thereby requiring advanced HTA products, such as HAYNES® 233® alloy. Additionally, commercial aircraft, military aircraft, and the space technology markets are experiencing continued growth using wrought and additive manufacturing technology with our HTA products.  Three of our newest alloys that are enabling new technologies with wrought and additive manufactured products are HAYNES® 282® alloy, HAYNES® 244® alloy and HAYNES® 233® alloy.

Chemical Processing.  The chemical processing market represents a large base of customers with diverse CRA and HTA applications driven by demand in key end-use markets such as automobiles, housing, health care, biopharmaceuticals, agriculture and metals production. Both CRA and HTA products supplied by the Company have been used in the chemical processing market since the early 1930s. Demand for the Company’s products in this market is driven by the level of MRO and expansion requirements of existing chemical processing facilities, as well as the construction of new facilities. The expansion of manufacturing of chemicals from natural gas in North America is expected to be a driver of demand in this market. In addition, the Company believes the extensive worldwide network of Company-owned service and sales centers, as well as its network of independent distributors and sales agents who supplement the Company’s direct sales efforts outside of the U.S., provide, in certain cases, a competitive advantage in marketing its CRA and HTA products in the chemical processing market.

Industrial Gas Turbine (IGT).  Demand for the Company’s products in the industrial gas turbine market is driven primarily by utility-scale electricity generation, both for base load as well as for backup generation during times of peak power demand.  The benefit of these turbines are their relatively low cost, high efficiency, rapid response and reliability, especially as weather-controlled renewables have become major sources of electricity. An additional demand consideration is the drive to lower emissions from coal-fired generating facilities, since natural gas has gained acceptance as a cleaner, lower-cost alternative to coal.  Industrial gas turbines are also used for power and propulsion in certain classes of ships and ferries, most commonly as derivatives of popular aero turbine engines. Demand is also generated by mechanical drive units used for oil and gas production and pipeline transportation and for back-up sources of power generation for hospitals and shopping malls. The Company also has a strong presence in micro turbine applications, which provide decentralized power and thermal heating for many key markets including as backups for renewable energy.  The turbine hot sections are subjected to substantial wear and require periodic maintenance, and this MRO business is viewed by the Company as an area of continuing long-term growth. The Company’s products have allowed turbines to operate at higher temperatures and efficiencies for much longer service intervals than had been previously achieved.  The Company believes that multiple OEMs are modernizing their turbine models to use from 30% up to 100% hydrogen as fuel.  Hydrogen as a fuel may dramatically decarbonize turbines and prepare the IGT market for future environmental regulations.  The Company is supporting customers to enable the use of hydrogen as an alternative fuel for next-generation gas turbines.

​

Other Markets.  Other markets in which the Company sells its HTA products and CRA products include flue-gas desulfurization (FGD), oil and gas, waste incineration, industrial heat treating, automotive, thermocouples, sensors and instrumentation, biopharmaceuticals, solar and nuclear fuel. The Company also sells its products for use in the oil and gas

market, primarily in connection with sour gas production. In addition, incineration of municipal, biological, industrial and hazardous waste products typically produces very corrosive conditions that demand high performance alloys. Our alloys, such as ULTIMET^® alloy, are also actively marketed and used in wear and tear – corrosion applications.  The Company continues to look for opportunities to introduce and expand the use of its alloys in emerging technologies such as solar, fuel cells, emerging battery technologies, ultra-supercritical steam and supercritical-CO2 power plants, hydrogen production, and molten salt nuclear reactor applications. Markets capable of providing growth are being driven by increasing performance, reliability and service life requirements for products used in these markets, which could provide further applications for the Company’s products.

Through development of new alloys and new applications, the Company continues to seek to participate in additional markets with new revenue streams beyond the core markets of aerospace, chemical processing and industrial gas turbine industries. The Company believes that wear, medical/pharmaceutical, consumer electronics, petrochemical and emerging technologies such as renewable and clean energy, hydrogen production, next-generation nuclear power generation and additive manufacturing all present possible significant growth opportunities for its products.

Sales and Marketing and Distribution

The Company sells its products primarily through its direct sales organization, which operates from 14 total locations in the U.S., Europe and Asia, 11 of which are service and/or sales centers. All of the Company’s service and/or sales centers are operated either directly by the Company or through its direct or indirect wholly-owned subsidiaries. Approximately 75% of the Company’s net revenues in fiscal 2023 were generated by the Company’s direct sales organization. The remaining 25% of the Company’s fiscal 2023 net revenues were generated by a network of independent distributors and sales agents who supplement the Company’s direct sales in the U.S., Europe and Asia.  Going forward, the Company expects its direct sales force to generate approximately 75% of its total net revenues.

Providing technical assistance to customers is an important part of the Company’s marketing strategy. The Company provides performance analyses of its products and those of its competitors for its customers. These analyses enable the Company to evaluate the performance of its products, enabling the products to be included as part of the technical specifications used in the production of customers’ products. The Company’s market development professionals are assisted by its engineering and technology staff in directing the sales force to new opportunities. Management believes the Company’s combination of direct sales, technical marketing, engineering and customer support provides an advantage over other manufacturers in the high-performance alloy industry. This framework allows the Company to obtain direct insight into customers’ alloy needs and to develop proprietary alloys that provide solutions to customers’ demanding applications.

While the Company continues to make concentrated efforts to expand foreign sales, the majority of its revenue continues to be from sales to U.S. customers. The Company’s domestic expansion effort includes, but is not limited to, the continued development of new high-performance alloys, the addition of equipment in U.S. service and sales centers to improve the Company’s ability to provide a product closer to the form required by the customer and the continued effort, through the technical expertise of the Company, to find solutions to customer challenges.

The following table sets forth the approximate percentage of the Company’s fiscal 2023 net revenues generated through each of the Company’s distribution channels.

​

The Company’s top twenty customers accounted for approximately 34%, 39% and 43% of the Company’s net revenues in fiscal 2021, 2022 and 2023, respectively. No customer or group of affiliated customers of the Company accounted for more than 10% of the Company’s net revenues in fiscal 2021, 2022 or 2023.

Manufacturing Process

High-performance alloys require an extensive knowledge of both the specific alloy systems, as well as the process parameters required to deliver a tightly controlled product to customer specifications. These products are tightly controlled from a chemistry standpoint and require specialized equipment capable of delivering the physical and metallurgical properties that our customers require for their specialized applications. The number of process steps are typically more extensive for these high-performance alloy systems as compared to what would be required for stainless or carbon steel products. This longer production cycle contributes to slower inventory turns. The Company manufactures its high-performance alloys in various forms, including sheet, coil, plate, billet/ingot, tubular, wire and other forms. The Company also performs value-added cutting services to supply certain customers with product cut to their specification.

At the Kokomo, Indiana facility, the manufacturing process begins with raw materials being combined, melted and refined in a precise manner to produce the chemical composition specified for each high-performance alloy. The Company’s primary melt facility utilizes two different melting processes. The ARC/AOD process utilizes electric melting and gas refinement to remove carbon and other undesirable elements, thereby allowing more tightly-controlled chemistries, which in turn produce more consistent properties in the high-performance alloys. The other primary melt method utilizes vacuum induction melting, which involves the melting of raw materials through electromagnetic induction while under vacuum conditions to produce the desired tightly-controlled chemistry. The control systems allow for statistical process control monitoring in real time to improve product quality. For most high-performance alloys, this molten material is cast into electrodes and additionally refined through electro slag remelting. The resulting ingots are then forged or rolled to an intermediate shape and size depending upon the intended final product form. Intermediate shapes destined for flat products are then sent through a series of hot and cold rolling, annealing, pickling, leveling and shearing operations before being cut to final size.

The Company has a four-high Steckel rolling mill for use in hot rolling high-performance alloys, created specifically for that purpose. The four-high Steckel rolling mill was installed in 1982 and is one of the most powerful four-high Steckel rolling mills in the world. The mill is capable of generating over 12.0 million pounds of separating force and rolling a plate up to 72 inches wide. The mill includes integrated computer controls (with automatic gap control and programmed rolling schedules), two coiling Steckel furnaces and seven heating furnaces. Computer-controlled rolling schedules for each of the hundreds of combinations of product shapes and sizes the Company produces allow the mill to roll numerous widths and gauges to exact specifications without stoppages or changeovers.

The Company also operates a three-high hot rolling mill and a two-high hot rolling mill, each of which is capable of custom processing much smaller quantities of material than the four-high Steckel rolling mill. These mills provide the Company with significant flexibility in running smaller batches of varied products in response to customer requirements. The Company believes the flexibility provided by the three-high and two-high mills provides the Company with an advantage over its major competitors in obtaining smaller specialty orders.

The coil and sheet operation includes the ability to cold roll to tight tolerances, bright anneal, oxidize anneal and pickle, along with finishing processes that slit and cut to size.  The Company has invested and successfully brought on-line additional cold rolling capability, as well as additional annealing capacity to support the added rolling capacity. This added annealing capacity gives the Company the ability to offer either bright annealed finish or annealed and pickled finish that will be determined by specifications, application or type of alloy.

The Company also produces bar and billet products through a series of bar mills and a forge press operation that is located at the Kokomo, Indiana facility. 

The Arcadia, Louisiana facility uses nickel feedstock produced at the Kokomo facility to manufacture welded and seamless nickel alloy pipe, tubing and fittings, and purchases titanium extruded tube hollows to produce seamless titanium tubing. The manufacturing processes at Arcadia require cold pilger mills, weld mills, annealing furnaces, pickling

facilities, and various finishing lines.  The Company has also invested in specialized ultrasonic testing and eddy current testing equipment, including its own testing laboratory. The facility recently installed and is operating a 300 KW rooftop solar array.  This solar array investment allows us to reduce annual carbon dioxide emissions by approximately 800,000 pounds.

The Mountain Home, North Carolina facility manufactures high-performance alloy wire and small diameter bar products. Finished wire, bar, and powder products are also warehoused at this facility for quick delivery.  The 1MW solar array investment continues to produce 50% of the facility’s baseline electrical demand.

Backlog

The Company defines backlog to include firm commitments from customers for delivery of product at established prices.  At any given time, approximately 65% of the orders in the backlog include prices that are subject to adjustment based on changes in raw material costs.  Historically, approximately 50% of the Company’s backlog orders have shipped within six months and approximately 90% have shipped within 12 months. The backlog figures do not typically reflect that portion of the Company’s business conducted at its service and sales centers on a spot or “just-in-time” basis. For additional discussion of backlog, see Part II, Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this Annual Report on Form 10-K.

Consolidated Backlog at Fiscal Quarter End

​

Research and Technical Support

The Company’s technology facilities are located at the Kokomo headquarters and consist of 19,000 square feet of offices and laboratories. The Company has six fully equipped technology testing laboratories, including a mechanical and wear test lab, a metallographic lab, an electron microscopy lab, a corrosion lab, a high-temperature lab and a welding lab. These facilities also contain a reduced scale, fully equipped melt shop and process lab. As of September 30, 2023, the technology, engineering and technological testing staff consisted of 28 persons, 16 of whom have engineering or science degrees, including 8 with doctoral degrees, with the majority of degrees in the field of metallurgical engineering or materials science.

During fiscal 2023, research and development projects were focused on new alloy development, new product form development, process modeling, supportive data generation, and new alloy concept validation, relating to products for the aerospace, industrial gas turbine, chemical processing and oil and gas industries. In addition, significant projects were conducted to generate technical data in support of major market application opportunities in areas such as renewable energy, fuel cell systems, biotechnology (including toxic waste incineration and pharmaceutical manufacturing) and power generation.

Competition

The high-performance alloy market is a highly competitive market in which eight to ten major producers participate in various product forms. The Company’s primary competitors in flat rolled products include Special Metals Corporation, a subsidiary of Precision Castparts Corp. and ATI, Inc. The Company faces strong competition from domestic and foreign manufacturers of both high-performance alloys (similar to those the Company produces) and other competing metals. The Company may face additional competition in the future to the extent new materials are developed, such as plastics, ceramics or additive manufacturing that may be substituted for the Company’s products. The Company also

believes that it will face increased competition from non-U.S. entities, especially from competitors located in Eastern Europe and Asia.  Additionally, in past years, the Company’s domestic business has been challenged by a strong U.S. dollar, which makes the goods of foreign competitors less expensive to import into the U.S and makes the Company’s products more expensive to export outside the U.S.    

In past years, the Company experienced strong price competition from competitors which requires the Company to price its products competitively.  The Company continues to respond to this competition through alloy and application development, increasing emphasis on service centers, offering value-added services, improving its cost structure and striving to improve delivery times and reliability.

Human Capital Resources

The Company values its workforce as one of its most important assets.  Accordingly, the Company has adopted and maintains a number of programs and practices designed to attract and retain the best available personnel.

Succession and Recruitment

The Company has an organizational development and succession planning process in place for human capital strategic planning.  The succession planning process evaluates performance, skillsets and leadership capabilities of employees to backfill strategic roles.  Such succession plans have been utilized throughout the Company to prepare employees for future roles and leadership opportunities.  

The Company attempts to promote from within when opportunities occur, given employee growth and progression.  In addition to our internal corporate recruiter, the Company may also use external recruiters due to the challenging and competitive hiring environment.  In order to encourage development of a future workforce for the Company, the Company continues to sponsor projects at Purdue University, as well as providing internships in various departments and locations throughout the Company.

Retirement and Exit Programs

The Company also utilizes exit interviews and on-boarding interviews to provide feedback regarding turnover and employee desires for growth and development.  These interviews are also utilized to identify drivers of voluntary turnover and departures from the Company.  Employee turnover rate and reasons, including voluntary and involuntary departures, are monitored annually.  The global turnover rate in both fiscal 2022 and 2023 was 13%.   Both voluntary and involuntary terminations, including retirements, are used to calculate the turnover rate.  

Compensation Equity

The Company conducts inflation-adjusted compensation analysis to promote competitive compensation.  This analysis takes into account ranges for the geographical area, education level and job title under consideration.  The Company’s Human Resources Department develops offers for new salaried employees and also develops and administers promotions to maintain the internal integrity of the compensation levels for comparable positions.  The Company works with managers to ensure that high potential employees and those individuals with unique talents are appropriately developed and compensated.  For example, the Board of Directors authorized a pool of restricted stock that can be used to compensate high potential employees and for retention purposes.  The Compensation Committee, with the approval of the full Board in the case of Chief Executive Officer, determines annual salaries and other elements of compensation of the Company’s executive management team, taking into account similarly situated executives employed by a peer group of companies while also considering input of the Compensation Committee’s independent compensation consultant.  

Diversity and Inclusion

The Company considers diversity as a criterion evaluated as a part of the attributes and qualifications a candidate possesses.  The Company construes the notion of diversity broadly, considering differences in viewpoint, professional experience, education, skills and other individual qualities, in addition to race, gender, age, ethnicity and cultural

backgrounds as elements that contribute to a diverse Company.      

Management also considers similar broad concepts of diversity in its selection of vendors, contractors and other service providers.  As a federal government subcontractor, the Company follows applicable federal rules and regulations relating to diversity and other matters, including reporting requirements.  

Company Culture

The Company has controls in place relating to compliance with the Company’s Code of Business Conduct and Ethics, including a requirement for annual employee certification of that code as well as an established whistleblower hotline and related procedures.  In addition, human capital management, and more specifically employee hiring and retention, are included within the Company’s Enterprise Risk Management program, which is subject to Board oversight through regular reporting.  

Community Involvement

The Company has used internships and partnerships with universities to enrich recruiting efforts, particularly for technical roles such as research, alloy development and engineering.  The Company has also utilized outreach and partnerships with local community resources at all major locations such as community and technical colleges, workforce development agencies, industry groups and other entities to strengthen the Company’s hiring process and expand the future workforce candidate pool.

Employee Engagement and Wellness

The Company has a long-standing tuition reimbursement program to assist employees with the continuation of their education.  In addition, Company-sponsored employee assistance programs offer counseling for emotional, financial and family issues.  Continuing financial planning education is provided by the Company’s 401(k) plan administrator to assist employees in financial and retirement planning.  For many years, the Company’s investment in human capital has involved commitments to worker training, apprenticeship programs and funding college scholarships.

Management and Board Oversight

Management is engaged in the Company’s efforts regarding management of human capital resources at all levels through regular informational meetings, the Company’s Enterprise Risk Management program and organized succession planning.  The Board oversees these activities through regular reports by senior management regarding new or altered programs and as part of the Enterprise Risk Management process.  In addition, the Corporate Governance and Nominating Committee of the Board is actively engaged in monitoring and encouraging diversity at the Board level while the Compensation Committee also focuses on achieving and maintaining internal and external pay equity for the executive team and the Board members while overseeing incentive compensation more broadly throughout the organization.  In promoting pay equity, the Board and the Compensation Committee make use of peer comparisons and benchmarking measures.

Employee Statistics

As of September 30, 2023, the Company employed 1,248 full-time employees and 36 part-time employees worldwide. All eligible hourly employees at the Kokomo, Indiana and Arcadia, Louisiana plants (640 in the aggregate) are covered by two collective bargaining agreements.

On July 25, 2023, the Company entered into a five-year collective bargaining agreement with the United Steelworkers of America Local 2958, which covers eligible hourly employees at the Kokomo, Indiana plant. This agreement became effective on July 1, 2023 and will expire in June 2028.

On December 21, 2020, the Company entered into a collective bargaining agreement with the United Steelworkers of America Local 1505, which covers eligible hourly employees at the Company’s Arcadia, Louisiana plant.

This agreement will expire in December 2025.  

Management believes that current relations with the union are satisfactory.

Environmental Compliance

The Company has an enterprise level environmental policy, which focuses on fostering a safe workplace, offering high quality products while protecting the environment, compliance with law and health and safety management systems, utilization of all available resources to improve the quality, environmental, health and safety management systems and setting, implementing and reviewing quality, environmental, health and safety objectives and targets.  This policy is communicated to contractors and vendors who provide services on site, and the Company periodically audits selected suppliers from an environmental compliance perspective.  The Company maintains an environmental management system certified to ISO 14001 standards and, for its Kokomo operations, ISO 50001 standards.  The Company maintains multiple policies designed to comply with the Occupational Safety and Health Administration standards and has ISO 45001 certification.  

The Company’s facilities and operations are subject to various foreign, federal, state and local laws and regulations relating to the protection of human health and the environment, including those governing the discharge of pollutants into the environment and the storage, handling, use, treatment and disposal of hazardous substances and wastes. In the U.S., such laws include, without limitation, the Occupational Safety and Health Act, the Clean Air Act, the Clean Water Act, the Toxic Substances Control Act and the Resource Conservation and Recovery Act. As environmental laws and regulations continue to evolve, it is likely the Company will be subject to increasingly stringent environmental standards in the future, particularly under air quality and water quality laws and standards related to climate change issues, such as reporting of greenhouse gas emissions. Violations of these laws and regulations can result in the imposition of substantial penalties and can require facility improvements. Expenses related to environmental compliance, which are primarily included in Cost of sales on the Consolidated Statements of Operations, were approximately $3.5 million for fiscal 2023 and are currently expected to be approximately $3.9 million for fiscal 2024.  

The Company’s facilities are subject to periodic inspection by various regulatory authorities, who from time to time have issued findings of violations of governing laws, regulations and permits. In the past five years, the Company has paid administrative fines, none of which have had a material effect on the Company’s financial condition, for alleged violations relating to environmental matters, requirements relating to its Title V Air Permit and alleged violations of record keeping and notification requirements relating to industrial wastewater discharge. Capital expenditures of approximately $3.6 million were made for pollution control improvements during fiscal 2023, with additional expenditures of approximately $4.0 million for similar improvements planned for fiscal 2024.

The Company has received permits from the Indiana Department of Environmental Management and the North Carolina Department of Environment and Natural Resources to close and provide post-closure environmental monitoring and care for certain areas of its Kokomo and Mountain Home, North Carolina facilities, respectively.  

The Company is required among other things to monitor groundwater and to continue post-closure maintenance of the former disposal areas at each site. As a result, the Company is aware of elevated levels of certain contaminants in the groundwater on the Company’s property.  These levels are stable or decreasing, but additional testing and corrective action by the Company could be required.  The Company is unable to estimate the costs of any further corrective action at these sites, if required. Accordingly, the Company cannot assure that the costs of any future corrective action at these or any other current or former sites would not have a material effect on the Company’s financial condition, results of operations or liquidity.

The Company may also incur liability for alleged environmental damages associated with the off-site transportation and disposal of hazardous substances.  Generators of hazardous substances which are transported to disposal sites where environmental problems are alleged to exist are subject to claims under the Comprehensive Environmental Response, Compensation and Liability Act of 1980, or CERCLA, and state counterparts. CERCLA imposes strict, joint and several liabilities for investigatory and cleanup costs upon hazardous substance generators, site owners and operators and other potentially responsible parties. The Company is currently named as a potentially responsible party at one site.

There can be no assurance that the Company will not be named as a potentially responsible party at other sites in the future or that the costs associated with those sites would not have a material adverse effect on the Company’s financial condition, results of operations or liquidity.

Legal Compliance

In addition to environmental laws and regulations, the Company must comply with a wide variety of other laws and regulations, including, without limitation, federal and state securities laws, Delaware corporate law, international laws, data privacy laws in the U.S. and globally and safety laws and regulations.  The Company continues to engage in collaboration with key stakeholders, such as customers and regulators, to adapt to changing regulatory expectations.  Compliance with law and government regulations is not expected to have a material effect upon capital expenditures, earnings or the competitive position of the Company.  

Environmental, Social and Governance Matters

In addition to the information set forth below and above under “Environmental Compliance,” further information regarding the Company’s environmental, social and governance activities can be found under the Sustainability tab on the Company’s website at www.haynesintl.com/company-information/sustainability.

Governance and Social Matters

The Company is committed to a culture of openness, trust and integrity in all aspects of its business. It is critical that all employees, vendors and customers understand and accept that, in everything it does, the Company will conduct itself from the perspective of “doing the right thing for the right reason” at all times.

The Company has a number of policies in place governing social and ethical issues, including, without limitation:

In addition, all vendors of the Company must adhere to the Company’s Supplier Code of Conduct, which requires compliance with laws regarding anti-trust, human rights, health and safety, and conflict minerals, as well as laws prohibiting corruption, bribery, conflicts of interest, and child labor.

Similarly, all employees must adhere to the Code of Business Conduct and Ethics as well as attend training regarding these and other policies. In addition, the Company maintains a whistleblower hotline with access available on an anonymous basis online or by telephone. 

Environmental Matters

During fiscal 2022 and 2023, the Company completed installations of solar arrays at two of its manufacturing facilities.  The first installation, located at its wire facility in Mountain Home, North Carolina, is a 1MW solar fixed ground mount array, which continues to produce approximately 50% of the facility’s baseline electrical demand.  The second installation, located at its tubular facility in Arcadia, Louisiana, is a 300KW rooftop solar array, which allows the Company to reduce annual carbon dioxide emissions by approximately 800,000 pounds at that location.  

The Company is conscious of its environmental impact and is actively working to lighten its carbon footprint, including projects to measure greenhouse gas emissions and develop goals of reduction.  The ever-increasing demand for clean energy generation has led to the development of several emerging technologies that require high-temperature alloys for demanding operating conditions.

Since the invention of HASTELLOY^® X alloy in 1954, the Company’s alloys have made it possible for aerospace engines to run at high temperatures for long periods of time.  This has been further enhanced with alloys used in new generation engines such as HAYNES 282^®.  Engines being placed in service today reportedly consume 15% less fuel, produce 50% less pollutants and reduce the noise footprint near airports compared to the previous generation of airplane engines.  The environmental related improvements stem in part from the increased use of alloys, such as HASTELLOY^® X, HAYNES^® 188, 230^®, 282^®, 242^®, 244^® and other Haynes-invented alloys.  

In addition to the Company’s alloys for energy production and powering modern aircraft in a more environmentally friendly manner, the Company’s alloys are used in chemical plants that produce ecologically safe agrichemicals which help to feed the world’s growing population.  Company-invented HASTELLOY^® G-35^®, HYBRID-BC1^® and C-276 alloys are commonly used in these applications. In addition, HASTELLOY^® C-22^®, C-2000^® and B-3^® alloys are used by the pharmaceutical companies for production of chemicals.

Renewable power generation offers the promise of producing power from nature’s resources, such as wind, sun, rivers and oceans, with minimal depletion of the Earth’s resources and damage to the environment.  Many renewable energy technologies require the capture of energy at very high temperatures in extreme environments for which the Company’s alloys are well suited.  For example, the Company’s materials withstand intense heat in concentrated solar power plants to facilitate storable thermal power to generate electricity after the sun sets.

Safety Matters

Safety is the Company’s top priority.  Listed below are certain improvement efforts the Company has implemented in order to reduce occurrences of injuries, occupational diseases and work-related fatalities.

The Company extends its health and safety policies to suppliers, visitors and contractors. When suppliers, visitors and contractors come on site, they receive safety training. The training includes a review of relevant policies, required personal protection equipment, emergency procedures and specific hazards that may be encountered.

Available Information

The address of the Company’s website is www.haynesintl.com. The Company makes available on its website its reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”) as soon as reasonably practicable after filing such reports with the U.S. Securities and Exchange Commission (the “SEC”). The filings available on the Company’s website date back to February 3, 2011. For all filings made prior to that date, the Company’s website includes a link to the SEC’s website where such filings are available. Information contained or referenced on the Company’s website is not incorporated by reference into, and does not form a part of this Annual Report on Form 10-K or any other report the Company files or furnishes with the SEC.

Information about our Executive Officers

The following table sets forth certain information concerning the persons who serve as executive officers of the Company as of September 30, 2023.  Except as indicated in the following paragraphs, the principal occupations of these persons have not changed during the past five years.

​

Mr. Shor has served as President and Chief Executive Officer of the Company since September 2018 and has been a director since 2012.

Mr. Maudlin has served as the Vice President-Finance, Treasurer and Chief Financial Officer of the Company since December 2012.

Ms. Kohlheim has served as Vice President – General Counsel and Corporate Secretary of the Company since February 2023.  Prior to that, she served as Chief Legal Officer, General Counsel, and Compliance Officer of American Pain Consortium Holdings LLC from August 2021 to February 2023 and Counsel at Faegre Drinker Biddle & Reath LLP from April 2017 to August 2021.

​

Mr. Losch has served as Vice President—Sales & Distribution of the Company since January 2010.

Ms. Perry has served as Vice President – Human Resources of the Company since June 2023.  Prior to that, she served as Senior Director of Human Resources of Compal USA from October 2021 to June 2023 and Director of Human Resources, Americas for Delphi / Borg Warner from September 2018 to October 2021. 

​

Mr. Pinkham has served as Vice President—Tube and Wire Products of the Company since September 2018.  

Mr. Strobel has served as Vice President—Operations of the Company since September 2018.  

Mr. Tipton has served as Vice President and Chief Information Officer of the Company since January 2019.  Prior to that, he served as Chief Information Officer Americas for Dometic from August 2016 to December 2018.

Mr. Van Bibber has served as Controller and Chief Accounting Officer of the Company since December 2012.

​

Item 1A.  Risk Factors

The following risk factors should be considered carefully in addition to the other information contained in this filing.  

The risks and uncertainties described below are not the only ones we face and represent risks that our management believes are material to investors regarding an investment in our Company and our business.  Additional risks and uncertainties not presently known to us or that we currently deem not material may also harm our business.  If any of the following risks actually occur, our business, financial condition or results of operations could be harmed.  

​

Risks Related to Our Markets

Our revenues may fluctuate based upon changes in demand for our customers’ products.

Demand for our products is dependent upon and derived from the level of demand for the machinery, parts and equipment produced by our customers, which are principally manufacturers and fabricators of machinery, parts and equipment for highly specialized applications. Historically, certain markets in which we compete have experienced unpredictable, wide demand fluctuations.  Because of the comparatively high level of fixed costs associated with our manufacturing processes, significant declines in our markets in prior years have had, and in the future may have, a disproportionately adverse impact on our operating results.  

We have, in several instances, experienced substantial year-to-year declines in net revenues, primarily as a result of decreases in demand in the industries to which our products are sold. For example, in fiscal 2009, 2010, 2013, 2016, 2020 and 2021, our net revenues, when compared to the immediately preceding year, declined by approximately 31.1%, 13.0%, 16.7%, 16.6%, 22.4% and 11.3%, respectively.  We may experience similar declines in our net revenues in the future.  

Profitability in the high-performance alloy industry is highly sensitive to changes in sales volumes.

The high-performance alloy industry is characterized by high capital investment and high fixed costs. The cost of raw materials is the primary variable cost in the manufacture of our high-performance alloys and, in fiscal 2023, represented approximately 48% of our total cost of sales.  Other manufacturing costs, such as labor, energy, maintenance and supplies, often thought of as variable, have a significant fixed element. Profitability is, therefore, very sensitive to changes in volume, and relatively small changes in volume can result in significant variations in earnings. Our ability to effectively utilize our manufacturing assets depends greatly upon continuing demand in our markets, market share gains, and continued acceptance of our new products into the marketplace.    

We operate in cyclical markets.

A significant portion of our revenues is derived from the historically cyclical aerospace, power generation and chemical processing markets. Our sales to the aerospace industry constituted 49.2%, to the industrial gas turbine industry 20.5% and to the chemical processing industry constituted 15.6% of our total sales in fiscal 2023.  

The commercial aerospace industry is historically driven by demand from commercial airlines for new aircraft. Demand for commercial aircraft is influenced by industry profitability, trends in airline passenger traffic, the state of U.S. and world economies, the ability of participants within the supply chain to access the necessary levels of staffing required to meet industry demand and the ability of aircraft purchasers to obtain required financing and numerous other factors, including the effects of terrorism and health and safety concerns.  Supply chain disruptions in this or any of our other markets could materially and adversely affect our results of operations and financial condition.  

The military aerospace cycle is highly dependent on U.S. and foreign government funding which is driven by, among other factors, the effects of terrorism, a changing global political environment, U.S. foreign policy, military conflicts around the world and the retirement of older aircraft and technological improvements to new engines that increase reliability. Accordingly, the timing, duration and magnitude of cyclical upturns and downturns cannot be forecasted with certainty. Downturns or reductions in demand for our products sold into the aerospace market could have a material adverse effect on our business.

The industrial gas turbine market is also historically cyclical in nature. Demand for power generation products is global and is affected by the state of the U.S. and world economies, the availability of financing to power generation project sponsors, the increase in renewable energy and the political environments of numerous countries. The availability of fuels and related prices also have a large impact on demand. Decreased demand for our products in the industrial gas turbine industry may have a material adverse effect on our business.  

We also sell products into the chemical processing industry, which is also historically cyclical in nature. Customer demand for our products in this market may fluctuate widely depending on U.S. and world economic conditions, the availability and price of natural gas, the availability of financing, and the general economic strength of the end use customers in this market. Cyclical declines or sustained weakness in this market could have a material adverse effect on our business.

Our business depends, in part, on the success of commercial aircraft programs and our ability to accelerate production levels to timely match order increases in new or existing programs.

The success of our business will depend, in part, on the success of new and existing commercial aircraft programs.  We are currently under contract to supply components for a number of commercial aircraft programs.  Cancellations, reductions or delays of orders or contracts in any of these programs, or regulatory or certification-related groundings which impact the production schedules for any aircraft programs could have a material adverse effect on our business.  

The competitive nature of our business could result in pressure for price concessions to our customers and increased pressure to reduce costs.

We are subject to competition in all of the markets we serve. As a result, we may make price concessions to our customers in the aerospace, chemical processing and power generation markets from time to time, and customer pressure for further price concessions may occur. During periods of lower demand in other alloy markets, some of our competitors may use their available capacity to produce higher volumes of high-performance alloys, which leads to increased competition in the high-performance alloy market.  We have experienced increased competition from competitors who produce both stainless steel and high-performance alloys.  Maintenance of our market share will depend, in part, on our ability to sustain a cost structure that enables us to be cost-competitive. If we are unable to adjust our costs relative to our pricing and inflation, our profitability could suffer.  Our effectiveness in managing our cost structure and pricing for the value provided will be a key determinant of future profitability and competitiveness.  

Aerospace demand is primarily dependent on two manufacturers.

A significant portion of our aerospace products are sold to fabricators and are ultimately used in the production of new commercial aircraft. There are only two primary manufacturers of large commercial aircraft in the world, The Boeing Company and Airbus.  A significant portion of our aerospace sales are dependent on the number of new aircraft built by these two manufacturers, which is in turn dependent on a number of factors over which we have little or no control. Those factors include demand for new aircraft from around the globe, utilization levels of commercial and military aircraft, success of new commercial and military aircraft programs, insufficient levels of inventory throughout the supply chain  and factors that impact manufacturing capabilities, such as the availability of raw materials and manufactured components, changes in highly exacting performance requirements and product specifications, U.S. and world economic conditions, changes in the regulatory environment and labor relations between the aircraft manufacturers and their work forces.  Significant interruptions and slowdowns in the number of new aircraft built by the aircraft manufacturers has and may continue to have a material adverse effect on our business.  Additionally, as growth in airline travel is less concentrated in

international flights, demand for new aircraft will be more weighted towards single aisle aircraft, as opposed to double aisle aircraft, which utilizes a smaller proportion of our material.    

During periods of lower demand in other alloy markets, some of our competitors may use their available capacity to produce higher volumes of high-performance alloys, which leads to increased competition in the high-performance alloy market.

We have experienced increased competition from competitors who produce both stainless steel and high-performance alloys. As a result of the competition in our markets, we have made price concessions to our customers from time to time, typically on higher volume of more commodity type orders.  Maintenance of our market share will depend, in part, on our ability to sustain a cost structure that enables us to be cost-competitive. If we are unable to adjust our costs relative to our pricing, inflation and raw material costs, our profitability will suffer. Our effectiveness in managing our cost structure through changing circumstances will be a key determinant of future profitability and competitiveness.

Periods of reduced demand and excess supply as well as the availability of substitute lower-cost materials can adversely affect our ability to price and sell our products at the profitability levels we require to be successful.

Additional worldwide capacity and reduced demand for our products could significantly impact future worldwide pricing, which would adversely impact our business.  In addition, the potential availability of substitute materials may also cause significant fluctuations in future results as our customers opt for a lower-cost alternative.  For example, the potential substitution of wrought products that we produce by either powder or additive manufacturing could impact our future results.  

We change prices on our products as we deem necessary. In addition to the above general competitive impact, other market conditions and various economic factors beyond our control can adversely affect the timing of our pricing actions. The effects of any pricing actions may be delayed due to long manufacturing lead times or the terms of existing contracts. There is no guarantee that the pricing actions we implement will be effective in maintaining our profit margin levels.

Risks Related to Raw Materials

Rapid fluctuations in the prices of nickel, cobalt and other raw materials may materially adversely affect our business.

To the extent that we are unable to adjust to rapid fluctuations in the price of nickel, cobalt and other raw materials that we use in large quantities, there may be a negative effect on our gross profit margins. Additionally, increases in value added premiums charged by our commodity vendors, particularly nickel, could adversely impact our gross profit margins if those costs cannot be timely included in changes to selling prices.  In fiscal 2023, nickel, a major component of many of our products, accounted for approximately 43% of our raw material costs, or approximately 21% of our total cost of sales. We enter into several different types of sales contracts with our customers, some of which allow us to pass on increases in nickel or other raw material prices to our customers. In other cases, we fix the nickel or other raw materials component of our prices for a period of time through the life of a long-term contract. In yet other cases, we price our products at the time of order, which allows us to establish prices with reference to known costs of our raw material inventory, but which does not allow us to offset an unexpected rise in the price of raw materials.   We may not be able to successfully offset rapid changes in the price of nickel, cobalt or other raw materials in the future. In the event that raw material price increases occur that we are unable to pass on to our customers, our cash flows or results of operations could be materially adversely affected.

Our business cycle is long, involving multiple steps.  These refining steps generate high revert scrap pounds that are recycled back through the melt at metal value.  This scrap cycle also contributes to a long position as it relates to commodity price risk.

Our results of operations may also be negatively impacted if both customer demand and raw material prices rapidly fall at the same time. Because we value our inventory utilizing the first-in, first-out inventory costing methodology,

a rapid decrease in raw material costs has a negative effect on our operating results. In those circumstances, we recognize higher material cost in cost of sales relative to lower raw material market prices that drive the sales price.

In addition, we periodically enter into forward purchase agreements for our raw material supply. If we enter into a forward purchase agreement in which the quantity purchased does not match in a timely manner to the quantity sold in one or more customer contracts with fixed raw material prices (including vendor premiums), a rapid or prolonged decrease in the price of significant raw materials could adversely impact our business.

Our business is dependent on a number of raw materials that may not be available.

We use a number of raw materials in our products which are found in only a few parts of the world and are available from a limited number of suppliers. The availability of these materials may be influenced by private or government cartels, changes in world politics, trade sanctions as a result of geopolitical events such as war, additional regulation, labor relations between the materials producers and their work force, unstable governments in exporting nations, inflation, general economic conditions and export quotas imposed by governments in nations with rare earth element supplies.  The ability of key material suppliers to meet quality and delivery requirements or to provide materials on terms acceptable to us is beyond our control and can also impact our ability to meet commitments to customers. Shortages of certain raw materials or price fluctuations in raw materials could result in decreased sales as well as decreased margins, or otherwise adversely affect our business. The enactment of new or increased import duties on raw materials imported by us could also decrease availability, thereby adversely affecting our business.  The implementation of trade sanctions could result in reduced availability of certain raw materials or result in the need for us to find alternative sources of supply at a higher cost.    

If suppliers are unable to meet our demands, we may not have alternative sources of supply. In some cases, we have entered into exclusive supply agreements with respect to raw materials, which could adversely affect our business if the exclusive supplier cannot meet quality and delivery requirements to provide materials on terms acceptable to us.

The manufacturing of the majority of our products is a complex process and requires long lead times. We may experience delays or shortages in the supply of raw materials. If we are unable to obtain adequate and timely deliveries of required raw materials, we may be unable to timely manufacture sufficient quantities of products, which could cause us to lose sales, incur additional costs, delay new product introductions or suffer harm to our reputation.  

Risks Related to Our Production and Operations

Our operations are dependent on production levels at our Kokomo facility.

Our principal assets are located at our primary integrated production facility in Kokomo, Indiana and at our production facilities in Arcadia, Louisiana and in Mountain Home, North Carolina. The Arcadia and Mountain Home plants, as well as all of the domestic and foreign service centers, rely to a significant extent upon feedstock produced at the Kokomo facility.  Any production failures, shutdowns or other significant problems at the Kokomo facility could have a material adverse effect on our financial condition and results of operations. We maintain property damage insurance to provide for reconstruction of damaged equipment, as well as business interruption insurance to mitigate losses resulting from any production shutdown caused by an insured loss. Although we believe that our insurance is adequate to cover any such losses, that may not be the case. Additionally, our insurance policies include deductibles that would require us to incur losses that could have an adverse effect on our financial results in the event a significant interruption occurs.  One or more significant uninsured losses at our Kokomo facility may have a material adverse effect on our business.

In addition, from time to time we schedule planned outages on the equipment at our Kokomo facility for maintenance and upgrades. These projects are subject to a variety of risks and uncertainties, including a variety of market, operational and labor-related factors, many of which may be beyond our control.  Should a planned or unplanned shut down on a significant piece of equipment, or a significant decrease in personnel or lack of necessary new personnel, last substantially longer than originally planned, there could be a material adverse effect on our business.

Our production may be interrupted due to equipment failures, energy or personnel shortages, lack of critical spares, or other events affecting our factories.

Our manufacturing processes depend on certain sophisticated and high-value equipment, some of which has been in operation for a long period of time for which there may be only limited or no production alternatives. Failures of this equipment, possible significant unplanned delays in equipment upgrades, or the lack of critical spares or skilled personnel to timely repair this equipment, could result in production delays, revenue loss and significant repair costs. In addition, our factories rely on the availability of electrical power and natural gas, transportation for raw materials and finished products and employee access to our workplace that are subject to interruption in the event of severe weather conditions or other natural or manmade events.  While we maintain backup resources to the extent practicable, a severe or prolonged equipment outage, failure or other interruptive event affecting areas where we have significant manufacturing operations may result in loss of manufacturing or shipping days, which could have a material adverse effect on our business. Natural or manmade events that interrupt significant manufacturing operations of our customers also have had and could continue to have a material adverse effect on our business.

Issues related to our agreements with Titanium Metals Corporation could require us to make significant payments and could disrupt our operations and materially affect our financial results.

We entered into a Conversion Services Agreement and an Access and Security Agreement with Titanium Metals Corporation (TIMET) in November 2006 that provide for the performance of certain titanium conversion services through November 2026. In 2012, TIMET was acquired by Precision Castparts Corp. which owns Special Metals Corporation, a direct competitor of ours. Events of default under the Conversion Services Agreement include (a) a change in control in which the successor does not assume the agreement, (b) a violation by us of certain non-compete obligations relating to the manufacture and conversion of titanium and (c) failure to meet agreed-upon delivery and quality requirements. If an event of default under the Conversion Services Agreement occurs, TIMET could require us to repay the unearned portion of the $50.0 million fee paid to us by TIMET when the agreement was signed, plus liquidated damages of $25.0 million. Our obligations to pay these amounts to TIMET are secured by a security interest in our four-high Steckel rolling mill, through which we process a substantial amount of our products. In addition, the Access and Security Agreement with TIMET includes, among other terms, an access right that would allow TIMET to use certain of our operating assets, including the four-high mill, to perform titanium conversion services in the event of our bankruptcy or the acceleration of our indebtedness. Exercise by TIMET of its rights under its security interest following a default and non-payment of the amounts provided in the Conversion Services Agreement or exercise of the access rights under the Access and Security Agreement could cause significant disruption in our Kokomo operations, which would have a material adverse effect on our business.

In addition, the Conversion Services Agreement contains a requirement that we reserve a significant amount of capacity exclusively for TIMET.  That agreement does not contain a volume commitment on TIMET’s part.  The agreement also severely limits our ability to manufacture titanium, using the 4 high rolling mill, for any customer other than TIMET.  Our levels of business with TIMET have fluctuated.  Should TIMET underutilize its reserved capacity, we would not be able to reallocate that capacity during the life of this contract, which could negatively impact our business.  

Our operations could result in injury to our workers or third parties.

Our manufacturing operations could result in harm to our workers or third parties in our facilities.  Our manufacturing processes involve the use of heavy equipment, vehicles and chemicals, among other matters, which could lead to harm, injury, death or illness.  In addition to harm to individuals, any such occurrences could result in reputational harm, adverse effects on employee morale, litigation and other costs, any of which could materially and adversely affect our business.  

Although collective bargaining agreements are in place for certain employees, union or labor disputes could still disrupt the manufacturing process.

Our operations rely heavily on our skilled employees. Any labor shortage, disruption or stoppage caused by any deterioration in employee relations or difficulties in the renegotiation of labor contracts could reduce our operating margins

and income. Approximately 56% of our full-time U.S. employees are affiliated with unions or covered by collective bargaining agreements. The Company entered into two collective bargaining agreements with the United Steel Workers of America which cover eligible hourly employees at the Company’s Arcadia, Louisiana and Kokomo, Indiana facilities. The bargaining agreement which covers eligible hourly employees in the Kokomo, Indiana operations will expire on June 30, 2028 and the bargaining agreement which covers eligible hourly employees at the Company’s Arcadia, Louisiana operations will expire on December 21, 2025.  Failure to negotiate new labor agreements when required could result in a work stoppage at one or more of our facilities. In addition, other Company facilities could be subject to union organizing activity. Although we believe that our labor relations have generally been satisfactory, it is possible that we could become subject to additional work rules imposed by agreements with labor unions, or that work stoppages or other labor disturbances could occur in the future, any of which could reduce our operating margins and income and place us at a disadvantage relative to non-union competitors.  

Product liability and product warranty risks could adversely affect our operating results.

We produce many critical products for commercial and military aircraft, industrial gas turbines, chemical processing plants and pharmaceutical production facilities.  Failure of our products could give rise to potential substantial product liability and other damage claims as well as reputational harm. We maintain insurance addressing this risk, but our insurance coverage may not be adequate or insurance may not continue to be available on terms acceptable to us.

Additionally, we manufacture our products to strict contractually-established specifications using complex manufacturing processes. If we fail to meet the contractual requirements for a product, we may be subject to warranty costs to repair or replace the product itself and additional costs related to customers’ damages or the investigation and inspection of non-complying products. These costs are generally not insured.

Risks Related to our Research and Technology Activities

Failure to successfully develop, commercialize, market and sell new applications and new products could adversely affect our business.

We believe that our proprietary alloys, technology, applications development, technical services and metallurgical manufacturing expertise provide us with a competitive advantage over other high-performance alloy producers. Our ability to maintain this competitive advantage depends on our ability to continue to offer products and technical services that have equal or better performance characteristics than competing products at competitive prices. Our future growth will depend, in part, on our ability to address the increasingly demanding needs of our customers by inventing new alloys, enhancing the properties of our existing alloys, timely developing new applications for our existing and new alloys, and timely developing, commercializing, marketing and selling new alloys and products. If we are not successful in these efforts, or if our new alloys/products and product enhancements do not adequately meet the requirements of the marketplace and achieve market acceptance, our business could be negatively affected.

Failure to protect our intellectual property rights could adversely affect our business.

We rely on a combination of confidentiality, invention assignment and other types of agreements and trade secret, trademark and patent law to establish, maintain, protect and enforce our intellectual property rights. Our efforts in regard to these measures may be inadequate, however, to prevent others from misappropriating our intellectual property rights. In addition, laws in some non-U.S. countries affecting intellectual property are uncertain in their application, which can affect the scope or enforceability of our intellectual property rights. Any of these events or factors could diminish or cause us to lose the competitive advantages associated with our intellectual property, which could have a material adverse effect on our business.

Risks Related to Our Cybersecurity Activities

Cybersecurity incidents could have numerous adverse effects on our business.

Cybersecurity incidents may result in compromises or breaches of our and our customers’ systems, the insertion of malicious code, malware, ransomware or other vulnerabilities into our systems and products and in our customers’ systems, the exploitation of vulnerabilities in our and our customers’ environments, theft or misappropriation of our and our customers’ proprietary and confidential information, interference with our and our customers’ operations, exposure to legal and other liabilities, higher customer, employee and partner attrition, negative impacts to our sales and reputational harm and other serious negative consequences, any or all of which could materially harm our business. Additionally, outside service providers could be subject to attack which could inhibit those providers’ abilities to provide necessary services to us.  Any such attack could disrupt our operations and could have a material adverse effect on our business. 

 As previously disclosed, the Company experienced a network outage indicative of a cybersecurity incident on June 10, 2023. Upon detection of the incident, the Company engaged third-party specialists to assist in investigating the source of the outage, determine its potential impact on the Company’s systems, and securely restore full system functionality. On June 21, 2023, less than two weeks after the incident began, the Company announced that all manufacturing operations were running and that the Company had substantially restored administrative, sales, financial and customer service functions. Nevertheless, during those 11 days many aspects of the Company’s production were substantially disrupted. This cybersecurity incident resulted in a significant loss of production time and a reduction of products shipped in the third quarter of fiscal 2023, which negatively impacted the Company’s financial results for fiscal 2023.  In addition, the Company incurred significant costs and expenses, as well as the diversion of management’s attention, in responding to the cybersecurity incident, all of which had a negative impact on the Company. 

We have put in place a number of systems, processes and practices designed to protect against intentional or unintentional misappropriation or corruption of our systems and information or disruption of our operations including unauthorized access to our networks, servers and data, encryption of network access and the introduction of malware. Despite our cybersecurity efforts, we could be subject to future breaches of our security systems, which may result in unauthorized access, misappropriation, corruption or disruption of the information we are trying to protect, in which case we could suffer material harm. For example, access to our proprietary information regarding new alloy formulations would allow our competitors to use that information in the development of competing products. Current employees have, and former employees may have, access to a significant amount of information regarding our Company which could be disclosed to our competitors or otherwise used to harm us. Any future misappropriation or corruption of our systems and information or disruption of our operations could have a material adverse effect on our business.

We depend on our information technology infrastructure to support the current and future information requirements of our operations which exposes us to risk.

Management relies on our information technology infrastructure, including hardware, network, software, people and processes, to provide useful information to support assessments and conclusions about operating performance. Our inability to produce relevant or reliable measures of operating performance in an efficient, cost-effective and well-controlled fashion may have significant negative impacts on our business.  We continue to evaluate options to further upgrade our systems, including an implementation to a new enterprise resource planning (ERP) system.  A transition to a critical system or the discontinuation of support from legacy systems could result in disruptions, which could have a significant adverse impact on our business.  

Risks Related to Our Finance Activities

We value our inventory using the FIFO method, which could put pressure on our margins.

The cost of our inventories is determined using the first-in, first-out (FIFO) method. Under the FIFO inventory costing method, the cost of materials included in cost of sales may be different than the current market price at the time of

sale of finished product due to the length of time from the acquisition of raw material to the sale of the finished product.  In a period of decreasing raw material costs, the FIFO inventory valuation normally results in higher costs of sales as compared to the last-in, first-out method.  This could result in compression of the gross margin on our product sales.  

Changes in tax rules and regulations, or interpretations thereof, may adversely affect our effective tax rates.

We are a U.S. based company with customers and suppliers in foreign countries. We import various raw materials used in our production processes, and we export goods to our foreign customers. The United States, the European Commission, countries in the EU, the United Kingdom, and other countries where we do business may change relevant tax, border tax, accounting and other laws, regulations and interpretations, which may unfavorably impact our effective tax rate or result in other costs to us.  In addition, the Company has deferred tax assets on its balance sheet which could be subjected to unfavorable impacts if tax rates are reduced.  

We could be required to make additional contributions to our defined benefit pension plans or recognize higher related expense in our statement of operations as a result of adverse changes in interest rates and the capital markets.

Our estimates of liabilities and expenses for pension benefits incorporate significant assumptions, including the rate used to discount the future estimated liability, the long-term rate of return on plan assets and several assumptions relating to the employee workforce (salary increases, retirement age and mortality). We currently expect that we will be required to make future minimum contributions to our defined benefit pension plans. Many domestic and international competitors do not provide defined benefit plans and/or retiree health plans (which we do provide), and those competitors may have a resulting cost advantage.  A decline in the value of plan investments in the future, an increase in costs or liabilities, including those caused by the lowering of the rate used to discount future payouts, or unfavorable changes in laws or regulations that govern pension plan funding could materially change the timing and amount of required pension funding or the amount of related expense recognized in our statement of operations. The Company mitigates this risk with a glide path strategy that utilized liability driven investing (LDI) which shifts a greater concentration towards fixed income securities as the funding percentage increases.  The LDI approach is designed to match the duration and risk of the fixed income securities within the U.S. pension plan with that of the US pension benefit obligation.  Our mitigation strategies may not be successful, in which case we may be required to fund additional contributions to the plan.  A requirement to fund any deficit created in the future could have a material adverse effect on our business.

The carrying value of goodwill and other intangible assets may not be recoverable.

Goodwill and other intangible assets are recorded at fair value on the date of acquisition. We review these assets at least annually for impairment. Impairment may result from, among other things, deterioration in performance, adverse market conditions, adverse changes in applicable laws or regulations and a variety of other factors. A sustained downturn may result in the carrying value of our goodwill or other intangible assets exceeding their fair value, which may require us to recognize impairment to those assets.  Any future impairment of goodwill or other intangible assets could have a material adverse effect on our business.  

We may not be able to obtain financing on terms that are acceptable to us, or at all.

The strength of the global economy can have a significant impact on the availability of financing from capital markets.  Terms for borrowers could become significantly less favorable.  As a result of this and other issues, we may not be able to obtain needed financing on terms that are acceptable to us, or at all. Because we rely on financing to fund our working capital requirements, higher finance costs or an inability to obtain financing could negatively impact our business and financial results.

Our working capital requirements may negatively affect our liquidity and capital resources.

Our working capital requirements can vary significantly, depending in part on the timing of our delivery obligations under various customer contracts and the payment terms with our customers and suppliers. In the past year, the Company experienced a significant increase in order entry and production lead times have been extended which has increased the length of time from the time that we accept a customer order to the time that cash is collected from the sale

of material.  If our working capital needs exceed our cash flows from operations, we would look to our cash balances and availability for borrowings under our existing credit facility to satisfy those needs, as well as potential sources of additional capital, which may not be available on satisfactory terms and in adequate amounts, if at all.

Risks Related to Our Global Operations

Political and social turmoil including global war could adversely affect our business.

Political and social turmoil as well as war, could put pressure on economic conditions in the United States and worldwide. These political, social and economic conditions could make it difficult for us, our suppliers and our customers to forecast accurately and plan future business activities, and could adversely affect the financial condition of our suppliers and customers and affect customer decisions as to the amount and timing of purchases from us.  

We are subject to risks associated with global trade matters.

We are subject to macroeconomic downturns and geopolitical events in the United States and abroad that may affect the general economic climate, our performance and the demand of our customers.  The Russian invasion of Ukraine has resulted in trade restrictions with companies operating in Russia, which has forced us and other companies to source raw materials from other countries which can lead to insufficient supply or higher prices for us. Transportation and logistics resources, including shipping and transportation services, have been in short supply, which has had, and may continue to have, an adverse effect on our business. Further, any global trade wars or similar economic turmoil, including new or existing tariffs, could adversely affect our business.  In past years, the U.S. and China have imposed tariffs on large amounts of products imported into each of the countries from one another.  A “trade war” or other governmental action related to tariffs or international trade agreements or policies has the potential to adversely impact demand for our products, our costs, customers, suppliers and/or the U.S. economy or certain sections thereof, and, thus, adversely affect our business.  Our competitors outside of the United States may not be subject to these tariffs or other measures, and therefore, could have a significant competitive advantage over us in that respect. 

A global recession or disruption in global financial markets could adversely affect us.

A global recession or disruption in the global financial markets, including any significant tariff impositions or trade wars, presents risks and uncertainties that we cannot predict.  During recessionary economic conditions or financial market disruptions, we face risks that may include:

The risks inherent in our international operations may adversely impact our revenues, results of operations and financial condition.

We anticipate that we will continue to derive a significant portion of our revenues from operations in international markets. As we continue to expand internationally, we will need to hire, train and retain qualified personnel for our direct sales efforts and retain distributors and train their personnel in countries where language, cultural or regulatory impediments may exist. Distributors, regulators or government agencies may not continue to accept our products, services and business practices, and costs related to international trade have increased and may continue to increase. In addition, we purchase raw materials on the international market. The sale and shipment of our products and services across international borders, as well as the purchase of raw materials from international sources, subject us to the trade regulations of various jurisdictions, including tariffs and other possible punitive measures. In addition, the Russian invasion of Ukraine led us to voluntarily cease the procurement of nickel from Russia (which was previously only a small portion of our need

at roughly 5%).  Compliance with such regulations is costly. Any failure to comply with applicable legal and regulatory obligations could impact us in a variety of ways that include, but are not limited to, significant criminal, civil and administrative penalties, including imprisonment of individuals, fines and penalties, denial of export privileges, seizure of shipments and restrictions on certain business activities. Failure to comply with applicable legal and regulatory obligations could result in the disruption of our shipping, sales and service activities. Our international sales operations expose us and our representatives, agents and distributors to risks inherent in operating in foreign jurisdictions, any one or more of which may adversely affect our business, including:

Any material decrease in our international revenues or inability to expand our international operations as a result of these or other factors would adversely impact our business.

Export sales could present risks to our business.

Export sales account for a significant percentage of our revenues, and we believe this will continue to be the case in the future. Risks associated with export sales include: political and economic instability, including weak conditions in the world’s economies; accounts receivable collection; export controls; changes in legal and regulatory requirements; policy changes affecting the markets for our products; changes in tax laws and tariffs; trade duties; and exchange rate fluctuations (which may affect sales to international customers and the value of profits earned on export sales when converted into dollars). Any of these factors could materially adversely affect our business.

Risks Related to Our Legal and Environmental Activities

We may be adversely impacted by costs related to environmental, health and safety laws, regulations, and other liabilities.

We are subject to various foreign, federal, state and local environmental, health and safety laws and regulations, including those governing the discharge of pollutants into the environment, the storage, handling, use, treatment and disposal of hazardous substances and wastes and the health and safety of our employees. Under these laws and regulations, we may be held liable for all costs arising out of any release of hazardous substances on, under or from any of our current or former properties or any off-site location to which we sent or arranged to be sent wastes for disposal or treatment, and

such costs may be material. We could also be held liable for any and all consequences arising out of human exposure to such substances or other hazardous substances that may be attributable to our products or other environmental damage. In addition, some of these laws and regulations require our facilities to operate under permits that are subject to renewal or modification. These laws, regulations and permits can require expensive pollution control equipment or operational changes to limit actual or potential impacts to the environment. Violations of these laws, regulations or permits can also result in the imposition of substantial penalties, permit revocations and/or facility shutdowns.

We have received permits from the environmental regulatory authorities in Indiana and North Carolina to close and to provide post-closure monitoring and care for certain areas of our Kokomo and Mountain Home facilities that were used for the storage and disposal of wastes, some of which are classified as hazardous under applicable regulations. We are required to monitor groundwater and to continue post-closure maintenance of the former disposal areas at each site. As a result, we are aware of elevated levels of certain contaminants in the groundwater and additional corrective action could be required. Additionally, it is possible that we could be required to undertake other corrective action for any other solid waste management unit or other conditions existing or determined to exist at our facilities. We are unable to estimate the costs of any further corrective action, if required. However, the costs of future corrective action at these or any other current or former sites could have a material adverse effect on our business.

We may also incur liability for alleged environmental damages associated with the off-site transportation and disposal of hazardous substances. Our operations generate hazardous substances, many of which we accumulate at our facilities for subsequent transportation and disposal or recycling by third parties off-site. Generators of hazardous substances which are transported to disposal sites where environmental problems are alleged to exist are subject to liability under CERCLA and state counterparts. In addition, we may have generated hazardous substances disposed of at sites which are subject to CERCLA or equivalent state law remedial action. We have been named as a potentially responsible party at one site. CERCLA imposes strict, joint and several liabilities for investigatory and cleanup costs upon hazardous substance generators, site owners and operators and other potentially responsible parties regardless of fault. If we are named as a potentially responsible party at other sites in the future, the costs associated with those future sites could have a material adverse effect on our business.

Environmental laws are complex, change frequently and have tended to become increasingly stringent over time, including those relating to greenhouse gases. While we have budgeted for future capital and operating expenditures to comply with environmental laws, changes in any environmental law may directly or indirectly increase our costs of compliance and liabilities arising from any past or future releases of, or exposure to, hazardous substances and may materially adversely affect our business. See “Business—Environmental Compliance” in Part I, Item I in this Annual Report on Form 10-K.

Government regulation is increasing and if we fail to comply with such increased regulation, we could be subject to fines, penalties and expenditures.

The United States Congress has adopted several significant pieces of legislation, such as the Sarbanes-Oxley Act of 2002 and the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, including conflict minerals regulations, that affect our operation as well as those of other publicly traded companies. In addition, regulations relating to data protection and privacy law have become increasingly stringent.  Failure to comply with such regulations could result in fines, penalties or expenditures which could have a material adverse effect on our business.

Our business is affected by federal rules, regulations and orders applicable to some of our customers who are government contractors.

A number of our products are manufactured and sold to customers who are parties to U.S. government contracts or subcontracts. Consequently, we are indirectly subject to various federal rules, regulations and orders applicable to government contractors. From time to time, we are also subject to government inquiries and investigations of our business practices due to our participation in government programs. These inquiries and investigations are costly and consume a substantial amount of internal resources, and costs are expected to increase. Violations of applicable government rules and regulations could result in civil liability, in cancellation or suspension of existing contracts or in ineligibility for future

contracts or subcontracts funded in whole or in part with federal funds, any of which could have a material adverse effect on our business.

Our business could be materially and adversely affected by climate change and related matters.

​

We analyze climate change risks in two separate categories: transition risks and physical risks.  Transition risks are those risks relating to the transition of the global economy to a focus on more climate-friendly technologies.  This transition could have adverse financial impacts on us in several ways.  For instance, more stringent environmental policies or regulations could lead to increased expenses relating to green-house gas emissions or other emissions that could increase our operating costs.  Enhanced emissions-reporting or shifting technology could require us to write off or impair assets or retire existing assets early. Increased environmental mandates could also increase our exposure to litigation.  We could be required to incur increased costs and significant capital investment to transition to lower emissions technology.  In addition, overall market shifts could increase costs of our raw materials and cause unexpected shifts in energy costs.  Market shifts could also bring a prompt change in our overall revenue mix and sources, resulting in reduced demand in alloys and a decrease in revenues.  Focus on sustainability has increased, and the entire industry could be stigmatized as not friendly to the environment, which could adversely affect our reputation and our business, including due to difficulties in employee hiring and retention and our ability to access capital. Any of these matters could materially and adversely affect our business, financial condition or results of operations.

​

Physical risks from climate change that could affect our business include acute weather events such as floods, tornadoes or other severe weather and ongoing changes such as rising temperatures or extreme variability in weather patterns. These events could lead to increased capital costs from damage to our facilities, increased insurance premiums or reduced revenue from decreased production capacity based on supply chain interruptions.   Any of these events could have a material adverse effect on our business, financial condition or results of operations.

Our business subjects us to the risk of litigation claims, including those that might not be covered by insurance.

Litigation claims may relate to the conduct of our business, including claims pertaining to product liability, commercial disputes, employment actions, employee benefits, compliance with domestic and federal laws and personal injury. Due to the uncertainties of litigation, we might not prevail on claims made against us in the lawsuits that we currently face, and additional claims may be made against us in the future. The outcome of litigation cannot be predicted with certainty, and some of these lawsuits, claims or proceedings may be determined adversely to us. The resolution in any reporting period of one or more of these matters could have a material adverse effect on our business, particularly in the event that adverse outcomes are not covered by insurance.  

Our insurance may not provide enough coverage or may not be available on terms that are acceptable to us.

We maintain various forms of insurance, including insurance covering claims related to our properties and risks associated with our operations. Our existing property and liability insurance coverages contain exclusions and limitations on coverage. From time-to-time, in connection with renewals of insurance, we have experienced additional exclusions and limitations on coverage, larger self-insured retentions and deductibles and significantly higher premiums. In the future, our insurance coverage may not cover claims to the extent that it has in the past and the costs that we incur to procure insurance may increase significantly, either of which could have an adverse effect on our business.  Furthermore, the insurance industry, or our carriers specifically, may continue to alter their business models in manners that are unfavorable to us, resulting in insufficient or more costly coverage, which could adversely affect our business.

General Risk Factors

Our results of operations, financial condition and cash flows have been and may be adversely affected by pandemics, epidemics or other public health emergencies.  

​

Our business, results of operations, financial condition, cash flows and stock price have been, and may be in the future, adversely affected by pandemics, epidemics or other public health emergencies, such as the global outbreak of COVID-19, and the responses of governmental authorities to those emergencies.  

​

An interruption in energy services may cause manufacturing curtailments or shutdowns.

We rely upon third parties for our supply of energy resources consumed in the manufacture of our products. The potential for curtailment of certain energy resources exists which could have a material adverse effect on our business.  The prices for and availability of electricity, natural gas, hydrogen, oil and other energy resources are subject to volatile market conditions. These market conditions often are affected by political and economic factors, weather issues and other factors, which may be beyond our control. Disruptions in the supply of energy resources could impair our ability to manufacture products for customers. Further, increases in energy costs, which are outside of our control, or changes in costs relative to energy costs paid by competitors, have and may continue to adversely affect our business. To the extent that these uncertainties cause suppliers and customers to be more cost sensitive, increased energy prices may have an adverse effect on our business.

If we are unable to recruit, hire and retain skilled and experienced personnel, our ability to effectively manage and expand our business will be harmed.

Our success largely depends on the skills, experience and efforts of our officers and other key employees who may terminate their employment at any time. The loss of any of our senior management team could harm our business. Our ability to retain our skilled workforce and our success in attracting and hiring new skilled employees in a rising wage environment will be a critical factor in determining whether we will be successful in the future. We face challenges in hiring, training, managing and retaining employees in certain areas including metallurgical researchers, equipment technicians and sales and marketing staff as well as production and maintenance employees.  We also face hiring challenges relating to the location of our business.  If we are unable to recruit, hire and retain skilled employees, our new product and alloy development and commercialization could be delayed and our marketing and sales efforts could be hindered, which would adversely impact our business.

Healthcare costs, including those related to healthcare legislation, have and may continue to impact our business.

The Patient Protection and Affordable Care Act and other legislation relating to healthcare have increased our annual employee healthcare cost obligations.  In addition, costs associated with healthcare generally, including our retiree healthcare plans, are expected to continue to increase. We cannot predict the effect that healthcare legislation or regulation, and the costs of healthcare in general, will ultimately have on our business. However, each year as opportunities arise, programs are being implemented that are intended to drive savings and improve the health status of our population. The most recent project involved the transition to a new Third Party Administrator (TPA), with added support elements, which became effective on January 1, 2023.

Any significant delay or problems in any future upgrades of our operations could materially adversely affect our business, financial condition and results of operations.

We have undertaken, and may continue to undertake, significant capital projects in order to enhance, expand and/or upgrade our facilities and operational capabilities, including rebuilding the A&K line and 4-HI rolling system upgrades. Our ability to achieve the anticipated increased revenues or otherwise realize acceptable returns on these investments or other strategic capital projects that we may undertake is subject to a number of risks, many of which are beyond our control, including the ability of management to ensure the necessary resources are in place to properly execute these projects on time and in accordance with planned costs, the ability of key suppliers to deliver the necessary equipment according to schedule, customer demand (which fluctuates as a result of the cyclical markets in which we operate, as well

as other factors) and our ability to implement these projects with minimal impact to our existing operations. In addition, the cost to implement any given strategic capital project ultimately may prove to be greater than originally anticipated. If we are not able to achieve the anticipated results from the implementation of any of our strategic capital projects, or if we incur unanticipated implementation costs or delays, our business may be materially adversely affected.

We consider acquisitions, joint ventures and other business combination opportunities, as well as possible business unit dispositions, as part of our overall business strategy, which involve uncertainties and potential risks that we cannot predict or anticipate fully.

We intend to continue to strategically position our businesses in order to improve our ability to compete. Strategies we may employ include seeking new or expanding existing specialty market niches for our products, expanding our global presence, acquiring businesses complementary to existing strengths and continually evaluating the performance and strategic fit of our existing business units. From time to time, management of the Company holds discussions with management of other companies to explore acquisitions, joint ventures and other business combination. As a result, the relative makeup of our business is subject to change. Acquisitions, joint ventures and other business combinations involve various inherent risks, such as: assessing accurately the value, strengths, weaknesses, contingent and other liabilities and potential profitability of acquisition or other transaction candidates; the potential loss of key personnel of an acquired business; integration of technological systems; our ability to achieve identified financial and operating synergies anticipated to result from an acquisition or other transaction; diversion of the attention of certain management personnel from their day-to-day duties; and unanticipated changes in business and economic conditions affecting an acquisition or other transaction. International acquisitions or business combinations could be affected by many additional factors, including, without limitation, export controls, exchange rate fluctuations, domestic and foreign political conditions and deterioration in domestic and foreign economic conditions.

Our stock price is subject to fluctuations that may not be related to our performance as a result of being traded on a public exchange.

The stock market can be highly volatile. The market price of our common stock is likely to be similarly volatile, and investors in our common stock may experience a decrease in the value of their stock, including decreases unrelated to our operating performance or our prospective outlook of our business. The price of our common stock could be subject to wide fluctuations in response to a number of factors, including, but not limited to, those described elsewhere in this “Risk Factors” section and those listed below:

We may not continue to pay dividends at the current rate or at all.

Any future payment of dividends, including the timing and amount thereof, will depend upon our Board of Director’s assessment of the economic environment, our operations, financial condition, projected liabilities, compliance with contractual restrictions in our credit agreement and restrictions imposed by applicable law and other factors.

​

Provisions of our certificate of incorporation and by-laws could discourage potential acquisition proposals and could deter or prevent a change in control.

Some provisions in our certificate of incorporation and by-laws, as well as Delaware statutes, may have the effect of delaying, deterring or preventing a change in control. These provisions, including those regulating the nomination of directors and those allowing the Board of Directors to issue shares of preferred stock without stockholder approval, may make it more difficult for other persons, without the approval of our Board of Directors, to launch takeover attempts that a stockholder might consider to be in his or her best interest. These provisions could limit the price that some investors might be willing to pay in the future for shares of our common stock.

​

Our business could be adversely affected by actions of proxy advisory firms, large institutional Stockholders and activist Stockholders in response to Environmental, Social and Governance (ESG) matters.

​

An organization’s reputation is built on its relationship with employees, customers, suppliers, investors and the community they operate within.  Companies across a variety of industries, including the metals industry, are experiencing an increase in shareholder activism, particularly shareholder proposals regarding environmental sustainability, diversity and inclusion, and governance matters. If we are required to respond to stockholder proposals (including the implementation of any proposals), proxy contests or other actions by activist stockholder, we could incur significant expense, disruptions to our operations and diversion of the attention of management and our employees. Perceived uncertainties as to our future direction, strategy or leadership as a consequence of activist stockholders initiatives may result in reputational damage, which could negatively impact our relationships with customers and strategic partners, impair our ability to attract and retain employees, and cause volatility in our stock price. 

​

In addition, both Institutional Shareholder Services and Glass Lewis, two primary proxy advisory firms, as well as large institutional investors, have emphasized the importance of disclosure regarding the environmental, social and governance actions taken by publicly traded companies.  If we are unable to achieve acceptable scores relating to these matters, our stock price and reputation may be affected.

​

​

Item 1B.  Unresolved Staff Comments

There are no unresolved comments by the staff of the U.S. Securities and Exchange Commission.

​

Item 2.  Properties

Manufacturing Facilities.  The Company owns manufacturing facilities in the following locations:

The Kokomo plant, the Company’s primary production facility, is located on approximately 180 acres of industrial property and includes over 1.0 million square feet of building space. There are three sites consisting of (1) a headquarters and research laboratory; (2) primary and secondary melting, forge press and several smaller hot mills; and (3) the Company’s four-high Steckel rolling mill and sheet product cold working equipment, including two cold rolling

mills and three annealing furnaces.  All alloys and product forms other than tubular and wire goods are produced in Kokomo.

The Arcadia plant is located on approximately 42 acres of land and includes 202,500 square feet of buildings on a single site. Arcadia uses feedstock produced in Kokomo to fabricate welded and seamless high-performance alloy pipe and tubing and purchases extruded tube hollows to produce seamless titanium tubing. Manufacturing processes at Arcadia require cold pilger mills, weld mills, draw benches, annealing furnaces and pickling facilities.

The Mountain Home plant is located on approximately 29 acres of land and includes approximately 100,000 square feet of building space. The Mountain Home facility is primarily used to manufacture finished high-performance alloy wire. Finished wire products are also warehoused at this facility.

The owned facilities located in the United States are subject to a negative pledge which secures the Company’s obligations under its U.S. revolving credit facility with a group of lenders led by JPMorgan Chase Bank, N.A. The credit agreement provides that no liens can encumber the owned real property other than certain permitted encumbrances.  For more information, see Note 8 to the Consolidated Financial Statements included in Part II, Item 8 in this Annual Report on Form 10-K.

Service and Sales Centers.  The service and sales centers, which stock and sell all product forms, contain equipment capable of precision laser and water jet processing services to cut and shape products to customers’ precise specifications.  The Company owns service and sales centers in the following locations:

The Openshaw plant, located near Manchester, England, consists of approximately 5 acres of land and over 85,000 square feet of buildings on a single site.

In addition, the Company leases service and sales centers, which stock and sell all product forms, in the following locations:

Sales Centers.  The Company leases sales centers, which sell all product forms, in the following locations:

On January 1, 2015, the Company entered into a finance lease agreement for the building that houses the assets and operations of LaPorte Custom Metal Processing (LCMP).  The finance asset and obligation are recorded at the present value of the minimum lease payments.  The asset is included in Property, plant and equipment, net on the Consolidated Balance Sheets and is depreciated over the 20-year lease term.  The long-term component of the finance lease obligation is included in Long-term obligations (See Note 18. Long-term Obligations).

All owned and leased service and sales centers, not described in detail above, are single site locations and are less than 100,000 square feet, except for the LaPorte service center which is approximately 230,000 square feet.  

​

Item 3.  Legal Proceedings

The Company is regularly involved in litigation, both as a plaintiff and as a defendant, relating to its business and operations. Such litigation includes, without limitation, federal and state EEOC administrative and judicial actions, litigation of commercial matters, asbestos litigation and litigation and administrative actions relating to environmental matters. For more information, see Business—Environmental Compliance” in Part I, Item I in this Annual Report on Form 10-K and Note 10 – “Legal, Environmental and Other Contingencies” in Part II, Item 8 in this Annual Report on Form 10-K.  Financial Statements and Supplementary Data.”  Litigation and administrative actions may result in substantial costs and may divert management’s attention and resources, and the level of future expenditures for legal matters cannot be determined with any degree of certainty.  

​

Item 4. Mine Safety Disclosures

Not applicable.

​

Part II

Item 5.  Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

The Company’s common stock is listed on the NASDAQ Global Market (“NASDAQ”) and traded under the symbol “HAYN”.

As of November 1, 2023, there were approximately 56 holders of record of the Company’s common stock.

The Company has historically paid quarterly cash dividends.  Any decision to pay future cash dividends will be made by the Company’s Board of Directors and will depend upon the Company’s earnings, financial condition, cash position and other factors.  The Company may pay quarterly cash dividends up to $3.5 million per fiscal quarter so long as the Company is not in default under its existing credit facility.

Set forth below is information regarding the Company’s stock repurchases during the fourth quarter of fiscal 2023, comprising shares repurchased by the Company from employees to satisfy tax withholding obligations with respect to share-based compensation.

​

​

​

Cumulative Total Stockholder Return

The graph below compares the cumulative total stockholder return on the Company’s common stock to the cumulative total return of the Russell 2000 Index, S&P MidCap 400 Index, and Peer Group for each of the last five fiscal years ended September 30. The cumulative total return assumes an investment of $100 on September 30, 2018 and the reinvestment of any dividends during the period. The Russell 2000 is a broad-based index that includes smaller market capitalization stocks. The S&P MidCap 400 Index is the most widely used index for mid-sized companies. Management believes that the S&P MidCap 400 is representative of companies with similar market and economic characteristics to Haynes. Furthermore, we also believe the Russell 2000 Index is representative of the Company’s current market capitalization status and this index is also provided on a comparable basis. The companies included in the Peer Group Index: Allegheny Technologies, Inc., Howmet Aerospace Inc., Carpenter Technology Corp., Commercial Metals, Inc., Insteel Industries, Inc., Kaiser Aluminum Corporation, Materion Corporation, Olympic Steel, Inc., and Universal Stainless & Alloy Products, Inc. Management believes that the companies included in the Peer Group, taken as a whole, provide a meaningful comparison in terms of competition, product offerings and other relevant factors. The total stockholder return for the peer groups is weighted according to the respective issuer’s stock market capitalization at the beginning of each period.

​

announced in the industry show significant growth expectations going forward.  Double-aisle build rates are just beginning to increase, which should be a positive contributor to sales into the aerospace market going forward.

The main driver of demand in the chemical processing market is capital spending in the chemical processing sector, driven by end-user demand for housing, automotive, energy and agricultural products. The chemical processing market is sensitive to oil prices, currency fluctuations and fiscal policies as well as world economic conditions and GDP growth. Additional drivers of demand in this market include the increase in North American production of natural gas liquids and the further downstream processing of chemicals that may utilize equipment that requires high-performance alloys. Increased sales to the chemical processing industry in fiscal 2019 were related to improvement in global spending in the chemical processing sector combined with the Company’s initiatives aimed at improving volumes.  Fiscal 2020 and 2021 volume and sales were significantly impacted by the global COVID-19 pandemic. Volume shipped into the chemical processing industry market declined 34.9% in fiscal 2020 compared to the prior year and generally remained at that level across fiscal year 2021. Fiscal year 2022 volumes increased 23.0% combined with a higher value mix driving a 45.2% revenue increase.  Fiscal year 2023 revenue into the chemical processing industry was relatively flat at $92 million in spite of significant mix management as the Company focused more on the higher-value portion of the market vs. the commodity lower-value alloys and applications.  This was evident as volume shipped into the chemical processing industry declined nearly 23% in fiscal 2023 compared to the prior year; however, the average selling price per pound sold increased over $7.00 per pound to $33.51 per pound. The Company expects to continue its focus on high-value alloys and application within this market going forward.  

Industrial gas turbines are beneficial in electricity generating facilities due to low capital cost at installation and fewer emissions than traditional fossil fuel-fired facilities.  Sales to the industrial gas turbine market declined in years leading up to fiscal 2019 with significant overcapacity in large-frame turbines primarily used for electrical power generation combined with growth in renewable energy facilities which had taken a toll on demand for large-frame gas turbines.  Sales and volume began to recover in fiscal 2019 and the first half of fiscal 2020.  The recovery included a market share gain for the Company at an original equipment manufacturer which began to gain traction in fiscal 2020.  The global COVID-19 pandemic negatively affected this market; however, sales declines in fiscal 2020 were mitigated by the Company’s market share gains as well as restocking beginning to occur in the supply chain.  Sales declined only 4.7% in fiscal 2020 compared to the prior year, then increased 18.0% in fiscal 2021, 37.6% in fiscal 2022 and 31.3% in fiscal 2023 as the market share gain showed its full impact.  Also expanding sales into this market included traction of a Haynes proprietary alloy into a specific component during the repair, maintenance and overhaul of certain industrial gas turbines. The Company’s strategy includes efforts to further increase market share going forward and promote Haynes proprietary and specialty alloys into this market.

Other markets represent certain traditional businesses of oil and gas, flue-gas desulfurization, automotive and heat treating, as well as new emerging technologies such as ultra-supercritical CO2, next-generation nuclear, fuel cells, solar and other alternative energy applications.  The industries in the other markets category focus on upgrading overall product quality, improving product performance through increased efficiency, prolonging product life and lowering long-term costs. Companies in these industries are looking to achieve these goals through the use of “advanced materials” which support the increased use of high-performance alloys in an expanding number of applications. Sales into the other markets category improved in fiscal 2019.  Sales in fiscal 2020 declined 22.1%, as these markets were significantly impacted by the global COVID-19 pandemic.  Sales in fiscal year 2021 increased 28.8% as the Company strategically sought increased mill volumes especially in the flue-gas desulphurization (FGD) industry to help improve fixed costs absorption challenges in the overall low volume environment in early fiscal year 2021.  In fiscal year 2022, as overall volumes improved, the Company reallocated capacity to higher value markets such as aerospace and de-emphasized certain low-value commodity grade alloys such as those going into the FGD industry. This mix management strategy continued in fiscal 2023 with volumes declining 14.3% in fiscal 2023 compared to fiscal 2022, but revenue increased 12.3% year-over-year due to the average selling price per pound increasing over $10 per pound to $48.35 per pound.  This demonstrated the Company’s focus on higher-valued alloys and applications as well as one of the Company’s core focus initiatives to be compensated for value provided. The Company continues to evaluate new opportunities and applications for its products, particularly in the areas of renewable clean energy sources and other developing technologies relating to environmental and climate change issues.

Other revenue consists primarily of toll conversion, but also includes royalty income, scrap sales and revenue recognized from the TIMET agreement. The demand for toll conversion includes TIMET conversion demand completed on the Company’s four-high Steckel hot rolling mill in Kokomo, Indiana, as well as conversion work completed through LaPorte Custom Metal Processing.  Other revenue demand levels vary year-to-year based upon demand drivers in the respective markets of the Company’s tolling customers.  The global COVID-19 pandemic impacted tolling revenue, particularly revenue from those tolling customers that sell into the aerospace market.  Other revenue in fiscal 2023 increased 14.7% compared to fiscal 2022, helped by the recovery of aerospace market.  In fiscal 2023, other revenue represented 4.5% of net sales.  Other revenue does not include associated shipment pounds because the metal is not owned by the Company.

Valuation of the Pension Plan and the Retiree Healthcare Plan

The actuarial valuation of the U.S. pension and retiree healthcare plans on September 30, 2023 included a favorable increase in the discount rates used to measure the plan liabilities along with continued favorable retiree health care spending.  The U.S. defined benefit pension net liabilities decreased $7.0 million from $20.7 million at the beginning of fiscal 2023 to $13.6 million at September 30, 2023.  The funding percentage of plan assets compared to benefit obligation was 93.7% as of September 30, 2023.  This funding percentage has held relatively steady even through significant market turmoil as the Company had previously implemented a glide path which includes a customized liability driven investment strategy designed to secure this funding percentage.  In addition, the post-retirement health care liability, which is unfunded, declined $11.7 million during fiscal 2023 from $64.0 million at September 30, 2022 to $52.3 million at September 30, 2023 driven by the higher discount rates. These amounts do not include the U.K. pension plan which is a $8.8 million net asset (shown in other assets on the Consolidated Balance Sheets) or two small nonqualified pension plans with a liability of $0.5 million.  

Volumes and Pricing

Prior to the pandemic, the Company shipped 20.0 million pounds in fiscal 2019.  Then in the first half of fiscal 2020, volumes were negatively impacted by the grounding and subsequent production halt of the Boeing 737 MAX aircraft. The second half of fiscal 2020 was additionally significantly additionally impacted by the global COVID-19 pandemic, which dramatically lowered volumes for fiscal 2020 to 14.6 million pounds and fiscal 2021 to 14.0 million pounds. Volumes progressively improved during fiscal 2022 to 17.6 million pounds and then in fiscal 2023 to 18.5 million pounds; with the fourth quarter of fiscal 2023 at 4.9 million pounds, a run rate nearing the pre-pandemic levels. Fiscal 2023 was unfavorably impacted in the third quarter by the cyber-security incident described above, which impacted shipping levels.  Revenue was negatively impacted by an estimated $18-$20 million dollars (roughly 0.6 million pounds) as a result of this incident.  The Company expects to make up this shortfall over the next several quarters.            

Solid increases in volume and average selling price per pound were achieved in aerospace and industrial gas turbines in fiscal 2023. Fiscal 2023 aerospace volume increased 10.5% along with a 14.3% increase in aerospace average selling price, resulting in a 26.3%, or $60.4 million, aerospace revenue increase compared to the prior year.  This increase was primarily driven by the single-aisle commercial aircraft recovery, with the double-aisle aircraft recovery just beginning. Industrial gas turbine (IGT) volumes were up 19.7% along with a 9.8% increase in the IGT average selling price, resulting in a 31.4%, or $28.9 million, IGT revenue increase compared to the prior year due to market share gains along with higher usage of a Haynes proprietary alloy in a maintenance repair and overhaul application for a certain turbine.  Fiscal 2023 volumes in the chemical processing industry (CPI) decreased 20.8% compared to the prior year; however,  the CPI average selling price per pound increased 26.7%, resulting in flat revenue compared to the prior year. The Company focused on higher-value alloys and applications, with less focus on the commodity lower-value segment of the CPI market.  Similarly, volumes in other markets decreased (11.5)% compared to the prior year; however,  the other markets’ average selling price per pound increased 26.8%, resulting in a 12.3% increase compared to the prior year as a result of similar mix management strategies.

The product average selling price per pound in fiscal 2023 was $30.43, which was a 14.9% increase over the prior fiscal year.  The product average selling price per pound for the fourth quarter of fiscal 2023 was $31.56, which was an increase of 11.5% from the same period last year.  This increase was driven by raw material costs, price increases, and product mix.  

Gross Profit Trend Performance

The following tables show net revenue, gross profit and gross profit percentage for fiscal 2022 and fiscal 2023.