UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

(Mark One)



For the fiscal year ended December 31, 20152016

or

For the transition period from _________ to __________

Commission file number 1-584

FERRO CORPORATION

(Exact name of registrant as specified in its charter)



Registrant’s telephone number, including area code: 216-875-5600





Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  YES ☒    NO  ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  YES ☐    NO ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  YES ☒    NO ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  YES ☒    NO ☐

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained here, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ☒

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). YES ☐ NO ☒

The aggregate market value of Ferro Corporation Common Stock, par value $1.00, held by non-affiliates and based on the closing sale price as of June 30, 2015,2016, was approximately $1,444,390,000.$1,096,926,000.

On January 31, 2016,2017, there were 82,893,76883,438,992 shares of Ferro Corporation Common Stock, par value $1.00 outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Proxy Statement for Ferro Corporation’s 20162017 Annual Meeting of Shareholders are incorporated into Part III of this Annual Report on Form 10-K.





TABLE OF CONTENTS





PART I

Item 1 — Business

History, Organization and Products

Ferro Corporation was incorporated in Ohio in 1919 as an enameling company. When we use the terms “Ferro,” “we,” “us” or “the Company,” we are referring to Ferro Corporationcompany and its subsidiaries unless we indicate otherwise. Today, we aretoday is a leading producer of specialty materials that are sold to a broad range of manufacturers who, in turn, make products for many end-use markets.  We operate approximately 36 facilities aroundWhen we use the world that manufacture the following types of performance materials:

We referterms “Ferro,” “we,” “us” or “the Company,” we are referring to ourFerro Corporation and its subsidiaries unless indicated otherwise.

Ferro’s products as performance materials because we formulate them tofall into two general categories: functional coatings, which perform specific functions in the manufacturing processes and end products of our customers. The products we develop often are deliveredcustomers; and color solutions, which provide aesthetic and performance characteristics to our customerscustomers’ products. Our products are manufactured in combination with customized technical service. The value of our products stems fromapproximately 41 facilities around the benefits they deliver in actual use. We developworld.  They include:

Frits, porcelain and deliverother glass enamels, glazes, stains, decorating colors, pigments, inks, polishing materials, dielectrics, electronic glasses, and other specialty coatings.

Ferro develops and delivers innovative products to our customers throughbased on our key strengths in:in the following technologies:

We deliver these keydifferentiate ourselves in our industry by the consistent high quality of our products, combined with delivery of localized technical strengths to our customers in a way that creates additional value through our integrated applicationsservice and customized application technology support.  Our applications support personnel provide assistance to ourvalue-added technology services assist customers in their material specification and evaluation, product design, and manufacturing process characterization in order to help them optimize the efficient and cost-effective application of our products.

We divide ourFerro’s operations are divided into four business units, which comprise three reportable segments listed below:

_____________________

Financial information about our segments is included herein in Note 20 to the consolidated financial statements under Item 8 of this Annual Report on Form 10-K.

Markets and Customers

Ferro’s products are used in a variety of product applications in markets including:



Many of our products are used as coatings on our customers’ products, such as glazes and decorations on tile, glass and dinnerware. Other products are supplied to customers as powders that are used to manufacture electronic components and other products. Still other products are added during our customers’ manufacturing processes to provide desirable properties to their end product. Often, our products are a small portion of the total cost of our customers’ products, but they can be critical to the appearance or functionality of those products.

Our customers include manufacturers of ceramic tile, major appliances, construction materials, automobile parts, automobile, architectural and container glass, and electronic components and devices. Many of our customers, including makers of major appliances and automobile parts, purchase materials from more than one of our business units. Our customer base is well diversified both geographically and by end market.

We generally sell our products directly to our customers. However, a portion of our business uses indirect sales channels, such as agents and distributors, to deliver products to market. In 2015,2016, no single customer or related group of customers represented more than 10% of net sales. In addition, none of our reportable segments is dependent on any single customer or related group of customers.

Backlog of Orders and Seasonality

Generally, there is no significant lead time between customer orders and delivery in any of our business segments. As a result, we do not consider that the dollar amount of backlogged orders believed to be firm is material information for an understanding of our business. We also do not regard any material part of our business to be seasonal. However, customer demand has historically been higher in the second quarter when building and renovation markets are particularly active, and this quarter is normally the strongest for sales and operating profit.

Competition

In most of our markets, we have a substantial number of competitors, none of which is dominant. Due to the diverse nature of our product lines, no single competitor directly matches all of our product offerings. Our competition varies by product and by region, and is based primarily on price, product quality and performance, customer service and technical support, and our ability to develop custom products to meet specific customer requirements.

We are a worldwide leader in the production of glass enamels, porcelain enamels, and ceramic tile coatings. There is strong competition in our markets, ranging from large multinational corporations to local producers. While many of our customers purchase customized products and formulations from us, our customers could generally buy from other sources, if necessary.

Raw Materials and Supplier Relations

Raw materials widely used in our operations include:









These raw materials make up a large portion of our product costs in certain of our product lines, and fluctuations in the cost of raw materials can have a significant impact on the financial performance of the related businesses. We attempt to pass through to our customers raw material cost increases.

We have a broad supplier base and, in many instances, multiple sources of essential raw materials are available worldwide if problems arise with a particular supplier. We maintain many comprehensive supplier agreements for strategic and critical raw materials. We did not encounter raw material shortages in 20152016 that significantly affected our manufacturing operations, but we are subject to volatile raw material costs that can affect our results of operations.

Environmental Matters

As part of the production of some of our products, we handle, process, use and store hazardous materials. As a result, we operate manufacturing facilities that are subject to a broad array of environmental laws and regulations in the countries in which we operate, particularly for plant wastes and emissions. In addition, some of our products are subject to restrictions under laws or regulations such as California’s Proposition 65 or the European Union’s (“EU”) chemical substances directive. The costs to comply with complex environmental laws and regulations are significant and will continue for the industry and us for the foreseeable future. These routine costs are expensed as they are incurred. While these costs may increase in the future, they are not expected to have a material impact on our financial position, liquidity or results of operations. We believe that we are in substantial compliance with the environmental regulations to which our operations are subject and that, to the extent we may not be in compliance with such regulations, non-compliance will not have a materially adverse effect on our financial position, liquidity or results of operations.

Our policy is to operate our plants and facilities in a manner that protects the environment and the health and safety of our employees and the public. We intend to continue to make expenditures for environmental protection and improvements in a timely manner consistent with available technology.  Although we cannot precisely predict future environmental spending, we do not expect the costs to have a material impact on our financial position, liquidity or results of operations. Capital expenditures for environmental protection were $1.4 million in 2016, $5.5 million in 2015, and $0.7 million in 2014, and $2.5 million in 2013.2014. We also accrue for environmental remediation

costs when it is probable that a liability has been incurred and we can reasonably estimate the amount. We determine the timing and amount of any liability based upon assumptions regarding future events, and inherent uncertainties exist in such evaluations primarily due to unknown conditions, changing governmental regulations and legal standards regarding liability, and evolving technologies. We adjust these liabilities periodically as remediation efforts progress, the nature and extent of contamination becomes more certain, or as additional technical or legal information becomes available.

Research and Development

We are involved worldwide in research and development activities relating to new and existing products, services and technologies required by our customers’ continually changing markets. Our research and development resources are organized into centers of excellence that support our regional and worldwide major business units. These centers are augmented by local laboratories that provide technical service and support to meet customer and market needs in various geographic areas. 

Total expenditures for product and application technology, including research and development, customer technical support and other related activities,  were $27.3 million in 2016, $25.6 million in 2015, and $22.7 million in 2014, and $25.9 million in 2013.2014. 

Patents, Trademarks and Licenses

We own a substantial number of patents and patent applications relating to our various products and their uses. While these patents are of importance to us and we exercise diligence to ensure that they are valid, we do not believe that the invalidity or expiration of any single patent or group of patents would have a material adverse effect on our businesses. Our patents will expire at various dates through the year 2034. We also use a number of trademarks that are important to our businesses as a whole or to particular segments of our business. We believe that these trademarks are adequately protected.

Employees

At December 31, 2015,2016, we employed 4,8465,125 full-time employees, including 4,1084,326 employees in our foreign consolidated subsidiaries and 738799 in the United States (“U.S.”). Total employment increased by 846218 in our foreign subsidiaries and by 2161 in the U.S. from the prior year end due to the additions related to acquisitions and new business opportunities net effect of cost reduction initiatives and the sale of our Venezuela joint venture.initiatives.

Collective bargaining agreements cover 13%12.5% of our U.S. workforce. NoneApproximately 8.1% of ourall U.S. employees are affected by labor agreements that expire in 2016.2017, and we expect to complete renewals of these agreements with no significant disruption to the related businesses. We consider our relations with our employees, including those covered by collective bargaining agreements, to be good.    

Our employees in Europe have protections afforded them by local laws and regulations through unions and works councils. Some of these laws and regulations may affect the timing, amount and nature of restructuring and cost reduction programs in that region.

Domestic and Foreign Operations

We began international operations in 1927. Our products are manufactured and/or distributed through our consolidated subsidiaries and unconsolidated affiliates in the following countries:



Consolidated Subsidiaries:





Unconsolidated Affiliates:







Financial information for geographic areas is included in Note 20 to the consolidated financial statements under Item 8 of this Annual Report on Form 10-K. More than 70% of our net sales are outside of the U.S. Our customers represent more than 30 industries and operate in approximately 100 countries.

Our U.S. parent company receives technical service fees and/or royalties from many of its foreign subsidiaries. As a matter of corporate policy, the foreign subsidiaries have historically been expected to remit a portion of their annual earnings to the U.S. parent company as dividends. To the extent earnings of foreign subsidiaries are not remitted to the U.S. parent company, those earnings are indefinitely re-invested in those subsidiaries.

Available Information

Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, and Current Reports on Form 8-K, including any amendments, will be made available free of charge on our Web site, www.ferro.com, as soon as reasonably practical, following the filing of the reports with the U.S. Securities and Exchange Commission (“SEC”). Our Corporate Governance Principles, Legallegal and Ethical Policies,ethical policies, Guidelines for Determining Director Independence, and charters for our Audit Committee, Compensation Committee and Governance and Nomination Committee are available free of charge on our Web site or to any shareholder who requests them from the Ferro Corporation Investor Relations Department located at 6060 Parkland Blvd., Suite 250, Mayfield Heights, Ohio, 44124.

Forward-looking Statements

Certain statements contained here and in future filings with the SEC reflect our expectations with respect to future performance and constitute “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. These statements are subject to a variety of uncertainties, unknown risks and other factors concerning our operations and the business environment, which are difficult to predict and are beyond our control.

Item 1A — Risk Factors    

Many factors could cause our actual results to differ materially from those suggested by statements contained in this filing and could adversely affect our future financial performance. Such factors include the following:

We sell our products into industries where demand has been unpredictable, cyclical or heavily influenced by consumer spending, and such demand and our results of operations may be further impacted by macro-economic circumstances.

We sell our products to a wide variety of customers who supply many different market segments. Many of these market segments, such as building and renovation, major appliances, transportation, and electronics, are cyclical or closely tied to consumer demand. Consumer demand is difficult to accurately forecast and incorrect forecasts of demand or unforeseen reductions in demand can adversely

affect costs and profitability due to factors such as underused manufacturing capacity, excess inventory, or working capital needs. Our forecasting systems and modeling tools may not accurately predict changes in demand for our products or other market conditions.

Our results of operations are materially affected by conditions in capital markets and economies in the U.S. and elsewhere around the world. Concerns over fluctuating prices, energy costs, geopolitical issues, government deficits and debt loads, and the availability and cost of credit have contributed to economic uncertainty around the world. Our customers may be impacted by these conditions and may modify, delay, or cancel plans to purchase our products. Additionally, if customers are not successful in generating sufficient revenue or are precluded from securing financing, they may not be able to pay, or may delay payment of, accounts receivable that are owed to us. A reduction in demand or inability of customers to pay us for our products may adversely affect our earnings and cash flow.

We strive to improve operating margins through sales growth, price increases, productivity gains, and improved purchasing techniques, but we may not achieve the desired improvements.

We work to improve operating profit margins through activities such as growing sales to achieve increased economies of scale, increasing prices, improving manufacturing processes, and adopting purchasing techniques that lower costs or provide increased cost predictability to realize cost savings. However, these activities depend on a combination of improved product design and engineering, effective manufacturing process control initiatives, cost-effective redistribution of production, and other efforts that may not be as successful as anticipated. The success of sales growth and price increases depends not only on our actions but also on the strength of customer demand and competitors' pricing responses, which are not fully predictable. Failure to successfully implement actions to improve operating margins could adversely affect our financial performance.

The global scope of our operations exposes us to risks related to currency conversion rates, new and different regulatory schemes and changing economic, regulatory, social and political conditions around the world. 

More than 70% of our net sales during 20152016 were outside of the U.S. In order to support globalour customers, access regional markets and compete effectively, our operations are located around the world. Our operations are subject to economic, regulatory, social and political conditions in multiple locations and we are subject to risks relating to currency conversion rates. We also may encounter difficulties expanding into additional growth markets around the world. Other risks inherent in international operations include the following:



We have subsidiaries in Turkey and in Egypt, countries with recent political strains that are located near politically volatile regions. Such conditions could potentially impact our ability to recover both the cost of our investments and earnings from those investments. While we attempt to anticipate these changes and manage our business appropriately in each location where we do business, these changes are often beyond our control and difficult to forecast.

The consequences of these risks may have significant adverse effects on our results of operations or financial position, and if we fail to comply with applicable laws and regulations, we could be exposed to civil and criminal penalties, reputational harm, and restrictions on our operations.

We may not be able to complete or successfully integrate future acquisitions into our business, which could adversely affect our business or results of operations.

As part of our strategy, we have and intend to continue to pursue acquisitions. Our success in accomplishing growth through acquisitions may be limited by the availability and suitability of acquisition candidates and by our financial resources, including available cash and borrowing capacity. Acquisitions involve numerous risks, including difficulty determining appropriate valuation, integrating operations, technologies, services and products of the acquired product lines or businesses, personnel turnover, and the diversion of management's attention from other business matters. In addition, we may be unable to achieve anticipated benefits from these acquisitions in the time frame that we anticipate, or at all, which could adversely affect our business or results of operations.

We have a presence in regions of the world where it can be difficult for a multi-national company such as Ferro to compete lawfully with local competitors, which may cause us to lose business opportunities.

We pursue business opportunities around the world and many of our most promising growth opportunities are in developing markets and the Asia-Pacific region, including the People’s Republic of China, Latin America,  and the People's Republic of China.Middle East. Although we have been able to compete successfully in those markets to date, local laws and customs can make it difficult for a multi-national company such as Ferro to compete on a “level playing field” with local competitors without engaging in conduct that would be illegal under U.S. or other countries'countries’ anti-bribery laws. Our strict policy of observing the highest standards of legal and ethical conduct may cause us to lose some otherwise attractive business opportunities to competitors in these regions.

We have undertaken and continue to undertake optimization and cost-savings initiatives, including restructuring programs, to improve our operating performance, but we may not be able to implement and/or administer these initiatives in the manner contemplated and these initiatives may not produce the desired results.

We have undertaken optimization and cost-savings initiatives, including restructuring programs, and may undertake additional optimization and cost-savings initiatives in the future. These initiatives involve, among other things, restructuring programs that involve plant closures and staff reductions. Although we expect these initiatives to help us achieve incremental cost savings and operational efficiencies, we may not be able to implement and/or administer these initiatives, including plant closures and staff reductions, in the manner contemplated, which could cause the initiatives to fail to achieve the desired results. Additionally, the implementation of these initiatives may result in impairment charges, some of which could be material. Even if we do implement and administer these initiatives in the manner contemplated, they may not produce the desired results. Accordingly, the initiatives that we have implemented and those that we may implement in the future may not improve our operating performance and may not help us achieve cost savings. Failure to successfully implement and/or administer these initiatives could have an adverse effect on our financial performance.

Our businesses depend on a continuous stream of new products, and failure to introduce new products could affect our sales, profitability and liquidity.

One way that we remain competitive is by developing and introducing new and improved products on an ongoing basis. Customers continually evaluate our products in comparison to those offered by our competitors. A failure to introduce new products at the right time that are price competitive and that provide the performance and other features required by customers could adversely affect our sales, or could require us to compensate by lowering prices. In addition, when we invest in new product development, we face risks related to production delays, cost over-runs and unanticipated technical difficulties, which could impact sales, profitability and/or liquidity.

We may not be able to complete or successfully integrate future acquisitions into our business, which could adversely affect our business or results of operations.

As part of our strategy, we intend to pursue acquisitions. Our success in accomplishing growth through acquisitions may be limited by the availability and suitability of acquisition candidates and by our financial resources, including available cash and borrowing capacity. Acquisitions involve numerous risks, including difficulty determining appropriate valuation, integrating operations, technologies, services and products of the acquired product lines or businesses, personnel turnover, and the diversion of management's attention from other business matters. In addition, we may be unable to achieve anticipated benefits from these acquisitions in the time frame that we anticipate, or at all, which could adversely affect our business or results of operations.

Our strategy includes seeking opportunities in new growth markets, and failure to identify or successfully enter such markets could affect our ability to grow our revenues and earnings.

Certain of our products are sold into mature markets and part of our strategy is to identify and enter into markets growing more rapidly. These growth opportunities may involve new geographies, new product lines, new technologies, or new customers.  We may not be successful capitalizing onsuccessfully exploit such opportunities and our ability to increase our revenue and earnings could be impacted.impacted as a result.



We have undertaken cost-savings initiatives, including restructuring programs, to improve our operating performance, but we may not be able to implement and/or administer these initiatives in the manner contemplated and these initiatives may not produce the desired results.

We have undertaken cost-savings initiatives, including restructuring programs, and may undertake additional cost-savings initiatives in the future. These initiatives involve, among other things, restructuring programs that involve plant closures and staff reductions. Although we expect these initiatives to help us achieve incremental cost savings and operational efficiencies, we may not be able to implement and/or administer these initiatives, including plant closures and staff reductions, in the manner contemplated, which could cause the initiatives to fail to achieve the desired results. Additionally, the implementation of these initiatives may result in impairment charges, some of which could be material. Even if we do implement and administer these initiatives in the manner contemplated, they may not produce the desired results. Accordingly, the initiatives that we have implemented and those that we may

implement in the future may not improve our operating performance and may not help us achieve cost savings. Failure to successfully implement and/or administer these initiatives could have an adverse effect on our financial performance.

We rely on information systems to conduct our business and interruption, or damage to, or failure or compromise of, these systems may adversely affect our business and results of operations.

We rely on information systems to obtain, process, analyze and manage data to forecast and facilitate the purchase and distribution of our products; to receive, process, and ship orders on a timely basis; to account for otherour product and service transactions with customers; to manage the accurate billing and collections for thousands of customers; to process payments to suppliers; and to manage data and records relating to our employees, contractors, and other individuals. Our business and results of operations may be adversely affected if these systems are interrupted, damaged, or compromised or if they fail for any extended period of time, due to events including but not limited to programming errors, computer viruses and security breaches. Information privacy and security risks have generally increased in recent years because of the proliferation of new technologies and the increased sophistication and activities of perpetrators of cyber-attacks, and prevention of privacy or security breaches cannot be assured. In addition, the processing and storage of certain information is increasingly subject to privacy and data security regulations and such regulations are country-specific and subject to differing interpretations and may be inconsistent among jurisdictions. We may be required to expend additional resources to continue to enhance our information privacy and security measures, investigate and remediate any information security vulnerabilities and/or comply with regulatory requirements. In addition, third-party service providers are responsible for managing a significant portion of our information systems, and we are subject to risk as a result of possible information privacy and security breaches of those third parties. The consequences of these risks could adversely impact our results of operations, financial condition, and cash flows.

We are subject to a number of restrictive covenants under our revolving credit facility, which could affect our flexibility to fund ongoing operations and strategic initiatives, and, if we are unable to maintain compliance with such covenants, could lead to significant challenges in meeting our liquidity requirements.

Our New Credit Facility, entered into on February 14, 2017, contains a number of restrictive covenants, including those described in more detail in Note 8 to the consolidated financial statements under Item 8 of this Annual Report on Form 10‑K. These covenants include limitations on use of loan proceeds, limitations on the Company’s ability to pay dividends and repurchase stock, limitations on acquisitions and dispositions and limitations on certain types of investments.  The New Credit Facility also contains standard provisions relating to conditions of borrowing and customary events of default, including the non-payment of obligations by the Company and the bankruptcy of the Company. Specific to the revolving credit facility, the Company is subject to a financial covenantscovenant regarding the Company’s outstanding net indebtedness and interest coverage ratios.maximum leverage ratio. If an event of default occurs, all amounts outstanding under the New Credit Facility may be accelerated and become immediately due and payable. The New Credit Facility is described in more detail in “Capital Resources and Liquidity” under Item 7 and in Note 8 to the consolidated financial statements under Item 8 of this Annual Report on Form 10-K.

The most critical of these ratios is the leverage ratio. As of December 31, 2015, we were in compliance with our maximum leverage ratio covenant of 3.75x as our actual ratio was 3.07x, providing $28.2 million of EBITDA cushion on the leverage ratio, as defined within our credit facility. To the extent that economic conditions in key markets deteriorate or we are unable to meet our business projections and EBITDA falls below approximately $130 million for a rolling four quarters, based on reasonably consistent debt levels with those as of December 31, 2015, we could be unable to maintain compliance with our leverage ratio covenant, in which case, our lenders could demand immediate payment of outstanding amounts and we would need to seek alternate financing sources to pay off such debts and to fund our ongoing operations. Such financing may not be available on favorable terms, if at all.

We depend on external financial resources, and the economic environment and credit market uncertainty could interrupt our access to capital markets, borrowings, or financial transactions to hedge certain risks, which could adversely affect our financial condition.

At December 31, 2015,2016, we had approximately $473.6$574.5 million of short-term and long-term debt with varying maturities and approximately $28.6$35.1 million of off balance sheet arrangements, including consignment arrangements for precious metals, bank guarantees, and standby letters of credit. These arrangements have allowed us to make investments in growth opportunities and fund working capital requirements. In addition, we may enter into financial transactions to hedge certain risks, including foreign exchange, commodity pricing, and sourcing of certain raw materials. Our continued access to capital markets, the stability of our lenders, customers

and financial partners and their willingness to support our needs are essential to our liquidity and our ability to meet our current obligations and to fund operations and our strategic initiatives. An interruption in our access to external financing or financial transactions to hedge risk could adversely affect our business prospects and financial condition. See further information regarding our liquidity in “Capital Resources and Liquidity” under Item 7 and in Note 8 to the consolidated financial statements under Item 8 of this Annual Report on Form 10‑K.

We depend on reliable sources of energy and raw materials, minerals and other supplies, at a reasonable cost, but the availability of these materials and supplies could be interrupted and/or their prices could change and adversely affect our sales and profitability. 

We purchase energy and many raw materials, which we use to manufacture our products. Changes in their availability or price could affect our ability to manufacture enough products to meet customers' demands or to manufacture products profitably. We try to maintain multiple sources of raw materials and supplies where practical, but this may not prevent unanticipated changes in their

availability or cost and, for certain raw materials, there may not be alternative sources. We may not be able to pass cost increases through to our customers. Significant disruptions in availability or cost increases could adversely affect our manufacturing volume or costs, which could negatively affect product sales or profitability of our operations.

Sales of our products to certain customers or into certain industries may expose us to different and complex regulatory regimes.

We seek to expand our customer base and the industries into which we sell. Selling products to certain customers or into certain industries, such as governments or the defense industry, requires compliance with regulatory regimes that do not apply to sales involving other customers or industries and that can be complex and difficult to navigate. Our failure to comply with these regulations could result in liabilities or damage to our reputation, which could negatively impact our business, financial condition, or results of operations.

Regulatory authorities in the U.S., European Union and elsewhere are taking a much more aggressive approach to regulating hazardous materials and other substances, and those regulations could affect sales of our products. 

Legislation and regulations concerning hazardous materials and other substances can restrict the sale of products and/or increase the cost of producing them. Some of our products are subject to restrictions under laws or regulations such as California’s Proposition 65 or the EU’s chemical substances directive. The EU “REACH” registration system requires us to perform studies of some of our products or components of our products and to register the information in a central database, increasing the cost of these products. As a result of such regulations, customers may avoid purchasing some products in favor of less hazardous or less costly alternatives. It may be impractical for us to continue manufacturing heavily regulated products, and we may incur costs to shut down or transition such operations to alternative products. These circumstances could adversely affect our business, including our sales and operating profits.

Sales of our products to certain customers or into certain industries may expose us to different and complex regulatory regimes.

We seek to expand our customer base and the industries into which we sell. Selling products to certain customers or into certain industries, such as governments or the defense industry, requires compliance with regulatory regimes that do not apply to sales involving other customers or industries and that can be complex and difficult to navigate. Our failure to comply with these regulations could result in liabilities or damage to our reputation, which could negatively impact our business, financial condition, or results of operations.

We have limited or no redundancy for certain of our manufacturing facilities, and damage to or interference with those facilities could interrupt our operations, increase our costs of doing business and impair our ability to deliver our products on a timely basis.

If certain of our existing production facilities become incapable of manufacturing products for any reason, we may be unable to meet production requirements, we may lose revenue and we may not be able to maintain our relationships with our customers. Without operation of certain existing production facilities, we may be limited in our ability to deliver products until we restore the manufacturing capability at the particular facility, find an alternative manufacturing facility or arrange an alternative source of supply. Although we carry business interruption insurance to cover lost revenue and profits in an amount we consider adequate, this insurance does not cover all possible situations. In addition, our business interruption insurance would not compensate us for the loss of opportunity and potential adverse impact on relations with our existing customers resulting from our inability to produce products for them.

The markets for our products are highly competitive and subject to intense price competition, which could adversely affect our sales and earnings performance.

Our customers typically have multiple suppliers from which to choose. If we are unwilling or unable to provide products at competitive prices, and if other factors, such as product performance and value-added services do not provide an offsetting competitive advantage, customers may reduce, discontinue, or decide not to purchase our products. If we could not secure alternate customers for lost business, our sales and earnings performance could be adversely affected.

If we are unable to protect our intellectual property rights, including trade secrets, or to successfully resolve claims of infringement brought against us, our product sales and financial performance could be adversely affected.

Our performance may depend in part on our ability to establish, protect and enforce intellectual property rights with respect to our products, technologies and proprietary rights and to defend against any claims of infringement, which involves complex legal, scientific and factual questions and uncertainties. We may have to rely on litigation to enforce our intellectual property rights. The intellectual property laws of some countries may not protect our rights to the same extent as the laws of the U.S. In addition, we may face claims of infringement that could interfere with our ability to use technology or other intellectual property rights that are material to our business operations. If litigation that we initiate is unsuccessful, we may not be able to protect the value of some of our intellectual property. In the event a claim of infringement against us is successful, we may be required to pay royalties or license fees to continue to use technology or other intellectual property rights that we have been using or we may be unable to obtain necessary licenses from third parties at a reasonable cost or within a reasonable time.

Our operations are subject to operating hazards and, as a result, to stringent environmental, health and safety regulations, and compliance with those regulations could require us to make significant investments.

Our production facilities are subject to hazards associated with the manufacture, handling, storage, and transportation of chemical materials and products. These hazards can cause personal injury and loss of life, severe damage to, or destruction of, property and equipment and environmental contamination and other environmental damage and could have an adverse effect on our business, financial condition or results of operations.

We strive to maintain our production facilities and conduct our manufacturing operations in a manner that is safe and in compliance with all applicable environmental, health and safety regulations. Compliance with changing regulations, or other circumstances, may require us to make significant capital investments, incur training costs, make changes in manufacturing processes or product

formulations, or incur costs that could adversely affect our profitability, and violations of these laws could lead to substantial fines and penalties. These costs may not affect competitors in the same way due to differences in product formulations, manufacturing locations or other factors, and we could be at a competitive disadvantage, which might adversely affect financial performance.

We have limited or no redundancy for certain of our manufacturing facilities, and damage to or interference with those facilities could interrupt our operations, increase our costs of doing business and impair our ability to deliver our products on a timely basis.

If certain of our existing production facilities become incapable of manufacturing products for any reason, we may be unable to meet production requirements, we may lose revenue and we may not be able to maintain our relationships with our customers. Without operation of certain existing production facilities, we may be limited in our ability to deliver products until we restore the manufacturing capability at the particular facility, find an alternative manufacturing facility or arrange an alternative source of supply. Although we carry business interruption insurance to cover lost revenue and profits in an amount we consider adequate, this insurance does not cover all possible situations. In addition, our business interruption insurance would not compensate us for the loss of opportunity and potential adverse impact on relations with our existing customers resulting from our inability to produce products for them.

If we are unable to manage our general and administrative expenses, our business, financial condition or results of operations could be negatively impacted.

We may not be able to manage our administrative expense in all circumstances. While we attempt to effectively manage such expenses, including through projects designed to create administrative efficiencies, increases in staff-related and other administrative expenses may occur from time to time. Recently, we have made significant efforts to achieve general and administrative cost savings and improve our operational performance. As a part of these initiatives, we have and will continue to consolidate business and management operations and enter into arrangements with third parties offering additional cost savings. It cannot be assured that our strategies to reduce our general and administrative costs and improve our operating performance will be successful or achieve the anticipated savings.

Our multi-jurisdictional tax structure may not provide favorable tax efficiencies.

We conduct our business operations in a number of countries and are subject to taxation in those jurisdictions. While we seek to minimize our worldwide effective tax rate, our corporate structure may not optimize tax efficiency opportunities. We develop our tax position based upon the anticipated nature and structure of our business and the tax laws, administrative practices and judicial decisions now in effect in the countries in which we have assets or conduct business, which are subject to change or differing interpretations. In addition, our effective tax rate could be adversely affected by several other factors, including: increases in expenses that are not deductible for tax purposes, the tax effects of restructuring charges or purchase accounting for acquisitions, changes related to our ability to ultimately realize future benefits attributed to our deferred tax assets, including those related to other-than-temporary impairment, and a change in our decision to indefinitely reinvest foreign earnings. Further, we are subject to review and audit by both domestic and foreign tax authorities, which may result in adverse decisions. Increased tax expense could have a negative effect on our operating results and financial condition.

We have significant deferred tax assets, and if we are unable to utilize these assets, our results of operations may be adversely affected.

To fully realize the carrying value of our net deferred tax assets, we will have to generate adequate taxable profits in various tax jurisdictions. At December 31, 2015,2016, we had $70.9$80.3 million of net deferred tax assets, after valuation allowances. If we do not generate adequate profits within the time periods required by applicable tax statutes, the carrying value of the tax assets will not be realized. If it becomes unlikely that the carrying value of our net deferred tax assets will be realized, the valuation allowances may need to be increased in our consolidated financial statements, adversely affecting results of operations. Further information on our deferred tax assets is presented in Note 10 to the consolidated financial statements under Item 8 of this Annual Report on Form 10‑K.

We may not be successful in implementing our strategies to increase our return on invested capital.

We are taking steps to generate a higher return on invested capital. There are risks associated with the implementation of these steps, which may be complicated and may involve substantial capital investment. To the extent we fail to achieve these strategies, our results of operations may be adversely affected.

We are subject to stringent labor and employment laws in certain jurisdictions in which we operate, we are party to various collective bargaining arrangements, and our relationship with our employees could deteriorate, which could adversely impact our operations.

A majority of our full-time employees are employed outside the U.S. In certain jurisdictions where we operate, labor and employment laws are relatively stringent and, in many cases, grant significant job protection to certain employees, including rights on termination of employment. In addition, in certain countries where we operate, our employees are members of unions or are represented by works councils. We are often required to consult and seek the consent or advice of these unions and/or works councils. These regulations and laws, coupled with the requirement to consult with the relevant unions or works councils, could have a significant impact on our flexibility in managing costs and responding to market changes.

Furthermore, approximately 13%12.5% of our U.S. employees as of December 31, 2015,2016, are subject to collective bargaining arrangements or similar arrangements. NoneApproximately 8.1% of all U.S. employees are affected by labor agreements that expire in 2017, and we expect to complete renewals of these agreements expire during 2016, and, whilewith no significant disruption to the related businesses.  While we expect to be able to renew these  agreements without significant disruption to our business when they are scheduled to expire, there can be no assurance that we will be able to negotiate labor agreements on satisfactory terms or that actions by our employees will not be disruptive to our business. If these workers were to engage in a strike, work stoppage or other slowdown or if other employees were to become unionized, we could experience a significant disruption of our operations and/or higher ongoing labor costs, which could adversely affect our business, financial condition and results of operations.

Employee benefit costs, especially postretirement costs, constitute a significant element of our annual expenses, and funding these costs could adversely affect our financial condition.

Employee benefit costs are a significant element of our cost structure. Certain expenses, particularly postretirement costs under defined benefit pension plans and healthcare costs for employees and retirees, may increase significantly at a rate that is difficult to forecast and may adversely affect our financial results, financial condition or cash flows. Changes in the applicable discount rate can affect our postretirement obligation. Declines in global capital markets may cause reductions in the value of our pension plan assets. Such circumstances could have an adverse effect on future pension expense and funding requirements. Further information regarding our retirement benefits is presented in Note 12 to the consolidated financial statements under Item 8 of this Annual Report on Form 10‑K.

Our implementation and operation of business information systems and processes could adversely affect our results of operations and cash flow.

We have been implementing and operating information systems and related business processes for our business operations. Implementation and operation of information systems and related processes involves risk, including risks related to programming and data transfer. Costs of implementation also could be greater than anticipated. In addition, we may be unable or decide not to implement such systems and processes in certain locations. Inherent risks, decisions and constraints related to implementation and operation of information systems could result in operating inefficiencies and could impact our ability to perform business transactions. These risks could adversely impact our results of operations, financial condition, and cash flows.

We are subject to risks associated with outsourcing functions to third parties.

We have entered into outsourcing agreements with third parties, and rely on such parties, to provide certain services in support of our business. One such vendor provides a number of business services related to our information systems and finance and accounting activity. Arrangements with third party service providers may make our operations vulnerable if vendors fail to provide the expected service or there are changes in their own operations, financial condition, or other matters outside of our control. If these service providers are unable to perform to our requirements or to provide the level of service expected, our operating results and financial condition may

suffer and we may be forced to pursue alternatives to provide these services, which could result in delays, business disruptions and additional expenses.

There are risks associated with the manufacture and sale of our materials into industries making products for sensitive applications.

We manufacture and sell materials to parties that make products for sensitive applications, such as medical devices. The supply of materials that enter the human body involves the risk of injury to consumers, as well as commercial risks. Injury to consumers could result from, among other things, tampering by unauthorized third parties or the introduction into the material of foreign objects, substances, chemicals and other agents during the manufacturing, packaging, storage, handling or transportation phases. Shipment of adulterated materials may be a violation of law and may lead to an increased risk of exposure to product liability or other claims, product recalls and increased scrutiny by federal and state regulatory agencies. Such claims or liabilities may not be covered by our insurance or by any rights of indemnity or contribution that we may have against third parties. In addition, the negative publicity surrounding any assertion that our materials caused illness or injury could have a material adverse effect on our reputation with existing and potential customers, which could negatively impact our business, operating results or financial condition.

We are exposed to lawsuits in the normal course of business, which could harm our business.

We are from time to time exposed to certain legal proceedings, which may include claims involving product liability, infringement of intellectual property rights of third parties and other claims. Due to the uncertainties of litigation, we can give no assurance that we will prevail on claims made against us in the lawsuits that we currently face or that additional claims will not be made against us in the future. We do not believe that lawsuits we currently face are likely to have a material adverse effect on our business, operating results or financial condition. Future claims or lawsuits, if they were to result in a ruling adverse to us, could give rise to substantial liability, which could have a material adverse effect on our business, operating results or financial condition.

We are exposed to intangible asset risk, and a write down of our intangible assets could have an adverse impact to our operating results and financial position.

We have recorded intangible assets, including goodwill, in connection with business acquisitions. We are required to perform goodwill impairment tests on at least an annual basis and whenever events or circumstances indicate that the carrying value may not be recoverable from estimated future cash flows. As a result of our annual and other periodic evaluations, we may determine that the intangible asset values need to be written down to their fair values, which could result in material charges that could be adverse to our operating results and financial position. See further information regarding our goodwill and other intangible assets in “Critical Accounting Policies” under Item 7 and in Note 7 to the consolidated financial statements under Item 8 of this Form 10-K.

Interest rates on some of our borrowings are variable, and our borrowing costs could be adversely affected by interest rate increases.

Portions of our debt obligations have variable interest rates. Generally, when interest rates rise, our cost of borrowings increases. We estimate, based on the debt obligations outstanding at December 31, 2015,2016, that a one percent increase in interest rates would cause interest expense to increase by $4.7$5.6 million annually. Although interest rates have remained relatively stable over the past few years, future increases could raise our cost of borrowings and adversely affect our financial performance. See further information regarding our interest rates on our debt obligations in “Quantitative and Qualitative Disclosures about Market Risk” under Item 7A and in Note 8 to the consolidated financial statements under Item 8 of this Form 10-K.

Many of our assets are encumbered by liens that have been granted to lenders, and those liens affect our flexibility to dispose of property and businesses.

Certain of our debt obligations are secured by substantially all of our assets. These liens could reduce our ability and/or extend the time to dispose of property and businesses, as these liens must be cleared or waived by the lenders prior to any disposition. These security interests are described in more detail in Note 8 to the consolidated financial statements under Item 8 of this Annual Report on Form 10‑K.

We may not pay dividends on our common stock at any time in the foreseeable future.

Holders of our common stock are entitled to receive such dividends as our Board of Directors from time to time may declare out of funds legally available for such purposes. Our Board of Directors has no obligation to declare dividends under Ohio law or our amended Articles of Incorporation. We may not pay dividends on our common stock at any time in the foreseeable future. Any determination by our Board of Directors to pay dividends in the future will be based on various factors, including our financial condition, results of operations and current anticipated cash needs and any limits our then-existing credit facility and other debt instruments place on our ability to pay dividends.

We are exposed to risks associated with acts of God, terrorists and others, as well as fires, explosions, wars, riots, accidents, embargoes, natural disasters, strikes and other work stoppages, quarantines and other governmental actions, and other events or circumstances that are beyond our control.

Ferro is exposed to risks from various events that are beyond our control, which may have significant effects on our results of operations. While we attempt to mitigate these risks through appropriate loss prevention measures, insurance, contingency planning and other means, we may not be able to anticipate all risks or to reasonably or cost-effectively manage those risks that we do anticipate. As a result, our operations could be adversely affected by circumstances or events in ways that are significant and/or long lasting.

The risks and uncertainties identified above are not the only risks that we face. Additional risks and uncertainties not presently known to us or that we currently believe to be immaterial also may adversely affect us. If any known or unknown risks and uncertainties develop into actual events, these developments could have material adverse effects on our financial position, results of operations, and cash flows.



Item 1B — Unresolved Staff Comments

None.

Item 2 — Properties

We lease our corporate headquarters offices, which are located at 6060 Parkland Blvd., Mayfield Heights, Ohio.  The companyCompany owns other corporate facilities worldwide.  We own principal manufacturing plants that range in size from 18,000 sq. ft. to over 700,000 sq. ft.  Plants we own with more than 250,000 sq. ft. are located in Spain; Germany; Belgium; Colombia; Mexico; Cleveland, Ohio; and Penn Yan, New York; and Mexico.York.  The locations of these principal manufacturing plants by reportable segment are as follows:

Pigments, Powders and Oxides-U.S.: Penn Yan, New York and Norcross, Georgia and Washington, Pennsylvania.Georgia.  Outside the U.S.: Colombia, China, India, Germany,Belgium, France, Romania, Spain and Brazil.



Performance Colors and Glass-U.S.: Washington, Pennsylvania, and Orrville, Ohio.  Outside the U.S.:  Brazil, China, France, Germany, Mexico, Spain, and the United Kingdom.



Performance Coatings-U.S.: Cleveland, Ohio.  Outside the U.S.: Argentina, Brazil, China, Egypt, France, Indonesia, Italy, Mexico, Spain, Poland, Portugal, and Thailand.

Pursuant to Ferro’s revolving credit facility, the participating lenders have a security interest in the real estate of the parent company and its domestic material subsidiaries.

In addition, we lease manufacturing facilities for the Performance Colors and Glass segment in Germany, Japan, Italy,the United Kingdom; Germany; Japan; Italy; King of Prussia, Pennsylvania; and Vista, California; andCalifornia.  We also lease manufacturing facilities for the Performance Coatings segment in Italy and Poland.  In some instances, the manufacturing facilities are used for two or more segments.  Leased facilities range in size from 18,00015,000 sq. ft. to over 100,000 sq. ft.



Item 3 — Legal Proceedings

There are various lawsuits and claims pending against the Company and its consolidated subsidiaries. We do not currently expect the resolution of such matters to materially affect the consolidated financial position, results of operations, or cash flows of the Company.



Item 4 — Mine Safety Disclosures

Not applicable.

Executive Officers of the Registrant

The executive officers of the Company as of February 24, 2016,March 1, 2017, are listed below, along with their ages and business experience during the past five years. The year indicates when the individual was named to the indicated position with Ferro, unless otherwise indicated.  

Peter T. Thomas — 6061

Chairman of the Board of Directors, 2014

President and Chief Executive Officer, 2013

Interim President and Chief Executive Officer, 2012

Vice President, Polymer and Ceramic Engineered Materials, 2009

Mark H. Duesenberg — 5455

Vice President, General Counsel and Secretary, 2008

Ann E. KillianBenjamin J. Schlater — 61

Vice President, Human Resources, 2005

Jeffrey L. Rutherford — 5541

Vice President and Chief Financial Officer, 20122016

Vice President, Corporate Development and Chief Financial Officer, Park-Ohio Holdings Corp., an industrial supply chain logisticsStrategy, 2015

Treasurer and diversifiedhead of corporate development, strategic and financial planning and risk management, Veyance Technologies, a global manufacturing business, 2008

company, 2007

PART II

Item 5 — Market for Registrant’s Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities

Our common stock is listed on the New York Stock Exchange under the ticker symbol FOE. On January 31, 2016,2017, we had 1,090901 shareholders of record for our common stock, and the closing price of the common stock was $9.29$14.14 per share.

The chart below compares Ferro’s cumulative total shareholder return for the five years ended December 31, 2015,2016, to that of the Standard & Poor’s 500 Index and the Standard & Poor’s MidCap Specialty Chemicals Index. In all cases, the information is presented on a dividend-reinvested basis and assumes investment of $100.00 on December 31, 2010.2011. At December 31, 2015,2016, the closing price of our common stock was $11.12$14.33 per share.

COMPARISON OF FIVE-YEAR

CUMULATIVE TOTAL RETURNS

The quarterly high and low intra-day sales prices and dividends declared per share for our common stock during 20152016 and 20142015 were as follows:



18

Table of Contents

19

Table of Contents

20

Table of Contents

2021

Table of Contents

22

Table of $1.9 million, partially mitigated by slightly higher sales of Pigments, Powders and Oxides products compared to the prior year. Contents