UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

For the fiscal year ended December 31, 20202021

or

For the transition period from                     to                     

Commission File No. 001-35083

NOVANTA INC.

(Exact name of registrant as specified in its charter)

(781) 266-5700

(Registrant’s telephone number, including area code)

Securities Registered Pursuant to Section 12(b) of the Act:

Securities Registered Pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ☑   No  ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ☐    No  ☑

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☑   No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (Section 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    Yes  ☑   No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.     ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  ☑

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ☐    No  ☑

The aggregate market value of the Registrant’s outstanding common shares held by non-affiliates of the Registrant, based on the closing price of the common shares on the Nasdaq Global Select Market on the last business day of the Registrant’s most recently completed second fiscal quarter (July 3, 2020)2, 2021) was $3,653,922,136.$4,835,362,420. For purposes of this disclosure, common shares held by officers and directors of the Registrant and by persons who hold more than 10% of the Registrant’s outstanding common shares have been excluded because such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily conclusive.

As of February 22, 2021,21, 2022, there were 35,310,47235,628,671 shares of the Registrant’s common shares, no par value, issued and outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Registrant’s Definitive Proxy Statement for the Registrant’s Annual Meeting of Shareholders scheduled to be held on May 13, 202112, 2022 to be filed with the Securities and Exchange Commission are incorporated by reference in answers to Part III of this Annual Report on Form 10-K.

NOVANTA INC.

FORM 10-K

YEAR ENDED DECEMBER 31, 20202021

TABLE OF CONTENTS

As used in this report, the terms “we,” “us,” “our,” “Novanta,” “NOVT” and the “Company” mean Novanta Inc. and its subsidiaries, unless the context indicates another meaning.

Unless otherwise noted, all dollar amounts in this report are expressed in United States dollars.

The following brand and trade names of the Company are used in this report: Cambridge Technology, Lincoln Laser, Synrad, Laser Quantum, ARGES, WOM, NDS, NDSsi, Med X Change, Reach Technology, JADAK, ThingMagic, Photo Research, General Scanning, ATI Industrial Automation, Celera Motion, IMS, MicroE, Applimotion, Zettlex, Ingenia and Westwind.

PART I

Cautionary Note Regarding Forward Looking Statements

Except for historical information, the matters discussed in this Annual Report on Form 10-K are forward looking statements that involve risks, uncertainties and assumptions that, if they never materialize or if they prove incorrect, could cause our consolidated results to differ materially from those expressed or implied by such forward looking statements. The Company makes such forward looking statements under the provision of the “Safe Harbor” section of the Private Securities Litigation Reform Act of 1995. Actual future results may vary materially from those projected, anticipated, or indicated in any forward-looking statements as a result of various important factors, including those set forth in Item 1A of this Annual Report on Form 10-K under the heading “Risk Factors.” Readers should also carefully review the risk factors described in the other documents that we file with the Securities and Exchange Commission (“SEC”) from time to time. In this Annual Report on Form 10-K, the words “anticipates,” “believes,” “expects,” “intends,” “future,” “could,” “estimates,” “plans,” “could,” “would,” “should,” “potential,” “continues” and similar words or expressions (as well as other words or expressions referencing future events, conditions or circumstances) identify forward looking statements. Forward looking statements also include the assumptions underlying or relating to any of the forward-looking statements. The forward looking statements contained in this Annual Report include, but are not limited to, statements related to: the anticipated impacts of the COVID-19 pandemic on our business, financial results and financial condition; our belief that the Purchasing Managers Index (“PMI”) may provide an indication of the impact of general economic conditions on our sales into the advanced industrial end market; our strategy; anticipated financial performance; expected liquidity and capitalization; drivers of revenue growth and our growth expectations in various markets; management’s plans and objectives for future operations, expenditures and product development, and investments in research and development; business prospects; potential of future product releases and expansion of our product and service offerings; anticipated revenue performance; industry trends; market conditions; our competitive positions; changes in economic and political conditions; changes in accounting principles; changes in actual or assumed tax liabilities; expectations regarding tax exposures; anticipated reinvestment of future earnings and dividend policy; anticipated expenditures in regard to the Company’s benefit plans; future acquisitions, integration and anticipated benefits from acquisitions and dispositions; anticipated economic benefits and expected costs of restructuring programs; ability to repay our indebtedness; our intentions regarding the use of cash; expectations regarding legal and regulatory environmental, social and governance requirements and our compliance thereto; and other statements that are not historical facts. All forward looking statements included in this document are based on information available to us on the date hereof. We will not undertake and specifically decline any obligation to update any forward-looking statements, except as required under applicable law.

Item 1. Business

Overview

Novanta Inc. and its subsidiaries (collectively referred to as the “Company”, “Novanta”, “we”, “us”, “our”) is a leading global supplier of core technology solutions that give medical and advanced industrial original equipment manufacturers (“OEMs”) a competitive advantage. We combine deep proprietary technology expertise and competencies in photonics, vision and precision motion with a proven ability to solve complex technical challenges. This enables us to engineer core components and sub-systems that deliver extreme precision and performance, tailored to our customers' demanding applications.

The Company was founded and initially incorporated in Massachusetts in 1968 as General Scanning, Inc. (“General Scanning”). In 1999, General Scanning merged with Lumonics Inc. The post-merger entity, GSI Lumonics Inc., continued under the laws of the Province of New Brunswick, Canada. In 2005, the Company changed its name to GSI Group Inc. Through a series of strategic divestitures and acquisitions, the Company transformed from one that was more focused on the semiconductor industry to one that primarily sellsdevelops and supplies components and sub-systems to OEMs in the medical and advanced industrial markets. The Company changed its name to Novanta Inc. in May 2016.

Strategy

Our strategy is to drive sustainable, profitable growth through short-term and long-term initiatives, including:

Recent Developments

Acquisition of ATI Industrial Automation, Inc.

On August 30, 2021, we acquired 100% of the outstanding shares of ATI Industrial Automation, Inc. (“ATI”), an Apex, North Carolina-based leading supplier of intelligent end-of-arm technology solutions to OEMs for advanced industrial and surgical robots for an upfront cash purchase price of $169.2 million, net of cash acquired and estimated working capital adjustments, and $44.0 million estimated fair value of contingent consideration. The contingent consideration will be payable in 2022 based on a multiple of the standalone ATI Adjusted EBITDA, as defined in the purchase and sale agreement, for the fiscal year ended December 31, 2021. The initial cash purchase price was financed with borrowings under our revolving credit facility and cash available on hand. We expect that the addition of ATI will complement and add intelligent technology solutions to further expand our position in mission critical robotic applications within the Precision Motion reportable segment.

Acquisition of Schneider Electric Motion USA, Inc.

On August 31, 2021, we acquired 100% of the outstanding shares of Schneider Electric Motion USA, Inc. (“SEM”), a Marlborough, Connecticut-based manufacturer of integrated motion control solutions and electronic controls for automation equipment for a total cash purchase price of $114.7 million, inclusive of post-closing working capital adjustments and net of cash acquired. The acquisition was financed with borrowings under our revolving credit facility. We expect that the addition of SEM will complement and expand our presence in life science applications and solutions for industrial automation applications within the Precision Motion reportable segment.

Impact of COVID-19 on Our Business

Our Employees

In response to the COVID-19 pandemic, we have taken proactive, aggressive actions to protect the health and safety of our employees. We established steering committees at both the corporate level and at each of our major facilities to provide leadership for and manage our COVID-19 risk mitigation actions and countermeasures. We have provided frequent employee communications that include guidance and updates to our employees with regards to COVID-19 safety procedures and status. We established rigorous safety measures in all of our facilities including implementing social distancing protocols, requiring working from home for those employees that do not need to be physically present onand have adapted our COVID-19 safety measures as the manufacturing floor or in our facilities to perform their work, suspending travel, spreading productionpandemic and related government mandates evolved over more shifts, implementing temperature checks at the entrances to our facilities, frequently disinfecting our workspaces, and providing masks to those employees who must be physically present in our facilities.past two years. We expect to continue some of these measures until we determine that the COVID-19 pandemic is adequately contained for purposes of our business. In connection with our COVID-19 remediation actions, we have incurred additional costs to protect the health of our employees, including investment in technologies and monitoring equipment. We expect such costs to continue to grow and be significant to our cost of operations. We may take further actions as government authorities require or recommend or as we determine to be in the best interest of our employees.

We are committed In connection with our COVID-19 remediation actions, we have incurred additional costs to retaining and supporting our employees during this pandemic. To retain our employees, we issued to allprotect the health of our employees, other than the Chief Executive Officer, the Chief Financial Officer, the Chief Human Resources Officerincluding investments in technologies and the Chief Accounting Officer, a special one-time restricted stock unit grant in April 2020 at a total fair valuemonitoring equipment, weekly testing of $14.4million in the aggregate. The restricted stock units vested in February 2021. These actions were implemented to create an ownership mindset and focus among allunvaccinated employees for the duration of the COVID-19 pandemicat certain locations and through the expected recovery, while maintaining the Company’s talent and capabilities.

Executive Compensation

The Compensation Committeerearranging some of our Board of Directors approvedfacilities to accommodate social distancing and flexible post-pandemic work environment.

Even as governmental restrictions are relaxed and economies gradually, partially or fully, reopen, the 2020 compensation plans for our executive officersongoing economic impacts and a Section 16 officer (collectively, the “Officers”) in February 2020. To supporthealth concerns associated with COVID-19 may continue to affect our business during the COVID-19 pandemic, the Officers agreed to a reduction in cash compensation. Further, the Officers did not receive the special one-time restricted stock unit grant issued to the rest of the employees. In June 2020, our Board of Directors agreed to forgo the cash retainers payable to our non-employee directors for the third quarter of 2020.

Our Customersforeseeable future.

The outbreak has significantly increased economic and demand uncertainty. The spread of COVID-19 has caused a global economic slowdown and a global recession. In 2020, the decline in customer demand in both the medical and advanced industrial end markets resulted in a decrease in sales to many of our customers. In the event of a further prolonged economic recession, overall demand for our products could decline further in the near term and our business would be adversely affected to a greater extent.

Our Facilities

Because of the COVID-19 pandemic, governmental authorities worldwide implemented numerous evolving measures to try to contain the spread of the virus, such as travel bans and restrictions, limits on social gatherings, quarantines, shelter-in-place orders, business shutdowns and social distancing. We have important manufacturing operations in the U.S., the U.K., Germany, and China, all of which have been affected by the COVID-19 pandemic. As ofThrough December 31, 2020, our manufacturing facilities around the world were in operation. While governmental measures may be modified or extended in the event of a resurgence of COVID-19 infections, the spread of new variants of the virus, and delays in effective vaccination of a large proportion of the populations, we have taken measures to protect our employees and expect our manufacturing facilities to remain operational. In connection with the COVID-19 pandemic,2021, we have experienced limited absenteeism from those employees who are required to be on site to perform their jobs.

Our Supply Chain

We have experienced limited disruptiondisruptions to our supply chain as a result of the COVID-19 pandemic to date. Weand global electronics and other raw material shortages. While we regularly monitor the financial health and manufacturing output of companies in our supply chain. Hardship on

chain, disruptions to our suppliers and/or sub-suppliers caused by the COVID-19 pandemicthese events could cause further disruption inchallenge our ability to obtain raw materials or components required to manufacture our products, adversely affecting our operations. operations and customer relationships.

To mitigate the risk of any potential supply interruptions from the COVID-19 pandemic and the global electronics and other raw material shortages, we are identifying alternative suppliers and distributors, sourcing raw materials from different supplier and distributor locations, modifying our product designs to allow for alternative components to be used where feasible without compromising quality, performance or other requirements, in-sourcing production of parts where feasible, and taking other actions to ensure oura sustainable supply of raw materials. Although we are mitigating potential supply interruptions from the COVID-19 pandemic,Despite our mitigation actions, if certain suppliers cannot produce a key part or component for us, or if the receipt of certain materials is otherwise delayed, we may miss our scheduled shipment deadlines and our relationship with customers may be harmed.

Additionally, restrictions on or disruptions of transportation, such as reduced availability of air transports, port closures and backlogs, and increased border controls or closures, have resulted in higher costs and delays, both for obtaining raw materials from suppliers and for shipping finished products to customers.

Our Liquidity

With respect to liquidity, weThe COVID-19 pandemic and the global electronics and other raw material shortages have taken actions to reduce costs and cash expenditures acrosscaused inflationary pressures on the Company. These actions included reducing hiring activities, restricting travel, adjusting employee compensation by eliminating fiscal year 2020 cash bonuses and base salary increases, implementing an unpaid time-off programmarket prices for substantially allcertain of our non-production workforce, limiting discretionary spending, reducing or deferring spendingparts and primary raw materials as well as increases in the costs of labor, freight, packaging, energy and other consumables that are used in our manufacturing processes. We have generally been able to offset increases in these costs through various productivity and cost reduction initiatives, as well as adjusting our selling prices to pass through some of these higher costs to our customers; however, our ability to raise our selling prices depends on capital investment projects, deferring lease payments on certain facilities,market conditions and deferring certain U.S. payroll tax payments in accordance with relief provisions undercompetitive dynamics. Given the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”). Astiming of December 31, 2020, we deferred $2.8 million in certain U.S. payroll tax payments under the CARES Act. Dueour actions compared to the uncertainty relatedtiming of these inflationary pressures, there may be periods during which we are unable to fully recover the future impact of the COVID-19 pandemic, we temporarily suspended repurchases underincreases in our share repurchase plans in April 2020.costs.

As of December 31, 2020, we had cash and cash equivalents of $125.1 million and available borrowing capacity under our revolving credit facility of $395.2 million. We have reviewed numerous potential scenarios in connection with the impact of COVID-19 on our business. Based on our analysis, we believe our existing balances of cash and cash equivalents, anticipated cash flows from our operating activities, and available borrowing capacity under our revolving credit facility will be sufficient to meet our cash needs arising in the ordinary course of business for the next twelve months. Additionally, we believe we will remain in compliance with our debt covenants for the next twelve months.

Acquisitions

We continuously evaluate our business mix and financial performance. Since 2013, we have executed a series of acquisitions in line with our strategy. The following table summarizes significant acquisitions since 2013:

Quantum Limited (“Laser Quantum”) in September 2018, we owned 100% of the outstanding equity

of Laser Quantum.

Segments

Our Chief Operating Decision Maker (“CODM”) is our Chief Executive Officer. Our CODM utilizes financial information to make decisions about allocating resources and assessing performance for the entire Company. We evaluate the performance of, and allocate resources to, our segments based on revenue, gross profit and operating profit. Our reportable segments have been identified based on commonality and adjacency of technologies, applications, and customers amongst our individual product lines.

Based upon the information provided to the CODM, we have determined that we have three reportable segments. The following table shows the external revenues, gross profit margin and operating profit for each of the segments for the year ended December 31, 20202021 (dollars in thousands)millions):

See Note 18 to Consolidated Financial Statements for additional financial information about our reportable segments.

Photonics

The Photonics segment designs, manufactures and markets photonics-based solutions, including laser scanning, laser beam delivery, CO2 laser, solid state laser, ultrafast laser, and optical light engine products to customers worldwide. The segment serves highly demanding photonics-based applications for advanced industrial processes, metrology, medical and life science imaging, DNA sequencing, and medical laser procedures.procedures, particularly ophthalmology applications. The vast majority of the segment’s product offerings are sold to OEM customers. The segment sells these products both directly, utilizing a highly technical sales force, and indirectly, through resellers and distributors.

The Photonics segment is comprised of four product lines:

Vision

The Vision segment designs, manufactures and markets a range of medical grade technologies, including medical insufflators, pumps and related disposables; visualization solutions; wireless recordertechnologies, video recorders, and video integration technologies for operating room integrations; optical data collection and machine vision technologies; radio frequency identification (“RFID”) technologies; thermal chart recorders; spectrometry technologies, and embedded touch screen solutions. The vast majority of the segment’s product offerings are sold to OEM customers. The segment sells these products both directly, utilizing a highly technical sales force, and indirectly, through resellers and distributors.

The Vision segment has nine product lines:

Precision Motion

The Precision Motion segment designs, manufactures and markets optical and inductive encoders, precision motormotors, servo drives and motion control sub-assemblies, servo drives,solutions, integrated stepper motors, intelligent robotic end-of-arm technology solutions, air bearings, and air bearing spindles to customers worldwide. The vast majority of the segment’s product offerings are sold to OEM customers. The segment sells these products both directly, utilizing a highly technical sales force, and indirectly, through resellers and distributors.

The Precision Motion segment includes sixseven product lines:

End Markets

We primarily operate in two end markets: the medical market and the advanced industrial market.

Medical Market

For the year ended December 31, 2020,2021, the medical market accounted for approximately 56%52% of the Company’s revenue. Revenue from our products sold to the medical market is generally affected by hospital and other healthcare provider capital spending, growth rates of surgical procedures, changes in regulatory requirements and laws, aggregation of purchasing by healthcare networks,

changes in technology requirements, timing of OEM customers’ product development and new product launches, changes in customer or patient preferences, and general demographic trends. Approximately 70% of our medical end market sales are related to surgical procedures, both elective and emergency based.

Advanced Industrial Market

For the year ended December 31, 2020,2021, the advanced industrial market accounted for approximately 44%48% of the Company’s revenue. Revenue from our products sold to the advanced industrial market is affected by a number of factors, including changing technology requirements and preferences of our customers, productivity or quality investments in a manufacturing environment, the financial condition of our customers, changes in regulatory requirements and laws, and general economic conditions. We believe that the Purchasing Managers Index (PMI)PMI on manufacturing activities specific to different regions around the world may provide an indication of the impact of general economic conditions on our sales into the advanced industrial market.

Working Capital Requirements

There are no special inventory stocking requirements or credit terms extended to customers that would have a material adverse effect on our working capital.

Customers

We have a diverse group of customers that include companies that are global leaders in their industries. Many of our customers participate in several market industries. No customer accounted for greater than 10% of our consolidated revenue during the years ended December 31, 2021 and December 31, 2019.  For the year ended December 31, 2020, the Company recognized revenue from an OEM customer in the medical end market which accounted for approximately 11% of our consolidated revenue.  No customer accounted for greater than 10% of our consolidated revenue during the years ended December 31, 2019 or 2018..

Our customers include a large number ofmany OEMs who integrate our products into their systems for sale to end users. We also sell a very small portion of our products directly to end users. Our customers include leaders in the medical and advanced industrial markets. A typical OEM customer will usually evaluate our products and our ability to provide application knowledge and expertise, post-sales application support and services, supply chain management over long durations, manufacturing capabilities, product quality, global presence, and product customization before deciding to incorporate our products into their products or systems. Customers generally choose suppliers based on a number ofseveral factors, including product performance, reliability, application support, price, breadth of the supplier’s product offerings, the financial condition of the supplier, and the geographical coverage offered by the supplier. Once certain of our products have been designed into a given OEM customer’s product or system, there are generally significant barriers to subsequent supplier changes until the end of the product or system life cycle, especially in the medical market.

Seasonality

While our revenues are not highly seasonal on a consolidated basis, the revenues of some of our individual product lines are impacted in the first quarter by the lower seasonal spending patterns of our customers due to their annual capital budgeting cycles.

Backlog

As of December 31, 20202021 and 2019,2020, our consolidated backlog was approximately $568.8 million and $239.6 million, and $243.1 million, respectively. The majority ofMost orders included in backlog represent open orders for products and services that, based on management’s projections, have a reasonable probability of being delivered over the subsequent twelve months. Orders included in backlog may be canceled or rescheduled by customers without significant penalty. Management believes that backlog typically is not a meaningful indicator of future business prospects for any of our business segments due to the short lead time required on our products and the ability of customers to reschedule or cancel orders. Therefore, backlog as of any particular date should not be relied upon as indicative of our revenues for any future period. During 2021, we experienced notable increases in lead times for our customer orders, caused by higher customer demand and unprecedented raw materials shortages and supply chain disruptions caused by both the COVID-19 pandemic and other economic and geopolitical factors.  

Manufacturing

Manufacturing functions are performed internally either when we choose to maintain control over critical portions of the production process, or for cost related reasons, while other portions of the manufacture of our products are outsourced to highly qualified third parties.

Products offered by our Photonics segment are manufactured at facilities in Bedford, Massachusetts; Mukilteo, Washington; Phoenix, Arizona; Wackersdorf, Germany; Taunton and Manchester, United Kingdom; and Suzhou, China. Products offered by our Vision segment are manufactured at facilities in Syracuse, and Rochester, New York; Bradenton, Florida; Mukilteo, Washington, and Ludwigsstadt, Germany. Products offered by our Precision

Motion segment are primarily manufactured at facilities in Bedford, Massachusetts; Apex, North Carolina; Marlborough, Connecticut; Rocklin, California; Poole and Cambridge, United Kingdom; and Suzhou, China.

ManyThe majority of our products are produced in manufacturing facilities certified under ISO 9001 certification, while the majoritymost of our products manufactured for the medical market are produced in factories under ISO 13485 certification. TheOur manufacturing facilities

for our medical insufflators, pumps, cameras in Ludwigsstadt, Germany, Stockport and accessories productsTaunton, United Kingdom, and Suzhou, China are ISO 14001 certified. Certain visualization solutions, thermal chart recorders, imaging informatics, and medical insufflators, pumps, cameras and accessories products are manufactured under current good manufacturing practices (cGMPs), which is a requirement of their medical device classification by the United States Food and Drug Administration (the “FDA”).

Marketing, Sales and Distribution

We sell our products globally, primarily through our direct sales force. Sales outside of the United States are largely based on a direct sales force, but occasionally are sold throughWe also use distributors, including manufacturers’ representatives, to either augment our selling effort or serve a local market where we have no direct sales force. Our local sales, applications, and service teams and our distributors work closely with our customers to ensure customer satisfaction with our products. We have sales and service centers located in the United States, Europe and Asia.

To support our sales efforts, we maintain and continue to invest in a number of application centers around the world, where our application experts work closely with customers on integrating and using our solutions in their equipment. We currently maintain service and application centers in the United States, Europe and Asia.

Competition

TheWe encounter aggressive and strong competition in virtually all the markets, in whichapplications, and technologies we compete are dynamicserve.  Due to the wide and highly competitive. While no single company competes with us across the breadthdiverse range of our product offerings,products and technologies, we face a fragmented competitive landscape, withmany different types of competitors in particular product categories and individual application areas.competition. Our competitors range from large foreign and domestic organizations, which produce a comprehensive array of goods and services and may have greater financial and other resources than we do, to small private firms, which produceorganizations producing a limited number of goodshighly specialized products or services for specialized market segments.

Competitors  The competitive climate of many of the markets we serve are characterized by rapidly evolving technology and customer demands that require continuing investments by us.  Our competitive success requires advances in technology and performance, improved price for performance ratios, demonstrated increased throughput performance for our customers products, are fragmented by particularlower total cost of ownership, product categories,quality, depth of our application knowledge and the individual markets in which we operate are highly competitive. Our major competitors by reportable segments include, among others:

Photonics: SCANLAB, Coherent,expertise, reputation amongst customers, customer service and a few smaller competitors.

Vision: Barco, Omron Microscan Systems, and a few smaller competitors.

Precision Motion: Renishaw, HEIDENHAIN, Physik Instrument, and a few smaller competitors.

Competitive factors in our Photonics, Vision, and Precision Motion segments include product performance, price, quality and reliability, features, compatibility of products with existing systems, technical support, product breadth,speed to market, geographical presence, and our overall reputation. deep customer relationships.        

We believe that our products offer a number ofseveral competitive advantages for our customers, and the breadth of technologies we offer gives us deep market applicationapplications knowledge to better serve our customers’ needs and distinguishes us from our competitors. Ultimately, any inability to deliver high-quality products timely when the customer needs them presents the biggest threat to our competitiveness.

Raw Materials, Components and Supplies

Each of our businesses uses a wide variety of raw materials, key components and parts that are generally available from alternative sources of supply and in adequate quantities from domestic and foreign sources. In some instances, we design and/or re-engineer the parts and components used in our products. For certain critical raw materials, key components and parts used in the production of some of our principal products, we have identified only a limited number of suppliers or, in some instances, a single source of supply. We also rely on a limited number of suppliers to manufacture subassemblies for some of our products.

For a further discussion of the importance and risks associated with our supply chain, see applicable risk factors under Item 1A of this Annual Report on Form 10-K.

Patents and Intellectual Property

We rely upon a combination of copyrights, patents, trademarks, trade secret laws and restrictions on disclosure to protect our intellectual property rights. We hold a number ofseveral registered and pending patents in the United States and other countries. In addition, we also have trademarks registered in the United States and other countries. We will continue to actively pursue applications for new patents and trademarks as we deem appropriate. However, there can be no assurance that any other patents will be issued to us or that such patents, if and when issued, will provide any protection or benefit to us.

Although we believe that our patents and pending patent applications are important, we rely upon several additional factors that are essential to our business success, including: market position, technological innovation, know-how, application knowledge and product performance. However, there can be no assurance that we will be able to sustain these advantages. Considering the diversified nature of our businesses, we do not believe that any individual patent is material to our business as a whole.

We also protect our proprietary rights by controlling access to our proprietary information and by maintaining confidentiality agreements with our employees, consultants, and certain customers and suppliers. For a further discussion of the importance of risks associated with our intellectual property rights, see applicable risk factors under Item 1A of this Annual Report on Form 10-K.

Human Capital

We believe that our employees are our most important asset. The Chief Human Resources Officer ("CHRO"(“CHRO”) is responsible for developing and executing our human capital strategy. This includes the acquisition, development, and retention of talent to deliver on our strategy as well as the design of employee compensation and benefits, and diversity, equity, and inclusion programs.(“DEI”) initiatives. The CHRO and the Chief Executive Officer ("CEO"(“CEO”) regularly update our board of directors on the operation and status of these human capital activities;activities, including, but not limited to, Novanta’stalent management, talent development, diversity, equity and inclusion, and succession planning programs.planning. As of December 31, 2020,2021, we employed approximately 2,2002,700 people, of which approximately 37%46% were in the United States, 51%42% in Europe, and 12% in Asia. We win with our customers by delivering new technology innovations through our highly technical Research & Development (“R&D”) teamengineering teams of approximately 420600 employees.

We believe that our employees should have a meaningful role in helping us develop our culture. We utilize survey feedback mechanisms forto measure employee engagement and organizational healthhealth. This enables us to measuregain insight into our current situationstatus and gain insight into areas where we can improve. We have conducted surveys of our entire employee population in 2018 and 2020each of last three years and we compare our employee engagement and organizational health scores against benchmark populations with our survey vendors. We have achieved employee participation levels of nearly 90% ofFollowing each survey cycle, we review the results across the company with our active employeesteams and have developeddevelop specific action plans acrossbased on the Company as a result of their feedback.feedback we receive. We are executingexecute on our action plans with the expectation to improve our overall organizationorganizational health and employee engagement.

All employees are responsible for upholding the Novanta Code of Ethics and Business Conduct, which is important in delivering on our strategy. We maintain a compliance hotline for the confidential reporting of any suspected policy violations or unethical business conduct on the part of our businesses, employees, officers, directors, suppliers or supplierscustomers and provide training and education to our global workforce with respect to our Novanta Code of Ethics and Business Conduct, anti-corruption and anti-bribery policies, data privacy regulations and workplace harassment.

Diversity and inclusionInclusion

The Novanta Way defines the fabric of our performance culture and how we work together, and it startsbegins with building cohesive teams. Our teams must be diverse and inclusive, based on trust, commitment, and accountability.Diversity, equity, and inclusion are an integral part of our culture and will be leader led and embedded into our ways of working. Our diversity iswill be reflected in our governance, leadership, influence, and technical expertise at all levels in the organization. We do not tolerate discrimination and harassment. We expect our teams to respect our core values and to conduct themselves ethically at all times in accordance with the Novanta Code of Ethics and Business Conduct.  

As of December 31, 2020,2021, our board of directors was 67% comprised of men and 33% comprised of women. Women representation on our board of directors increased 8 percentage points in 2021 from 2020. As of March 1, 2022, our board of directors was 75% comprised of men and 25% comprised of women, which was a doubling of women representation on our board of directors from 2019. In addition, in December 2020, our board of directors elected a new directorwomen. Underrepresented groups (defined as of February 2021, which will result in 33%an individual who self-identifies as Black, African American, Hispanic or Latino, Asian, Native American, Alaskan Native, Native Hawaiian or Pacific Islander, or two or more races or ethnicities) represented 11% of our board of directors coming from underrepresented communities.as of December 31, 2021.  

As of December 31, 2020,2021, our gender diversification efforts resulted in 35%36% of our workforce being women, and thewhich was an increase of one percentage point increase in women representation on our workforce from December 31, 2020.  The proportion of women in management positions amounted to 25%. , which is consistent with the prior year.

During 2020,2021, in line with our strategic initiative of increasing representation of employees from underrepresented communities, we launched a series of diversity, equity and inclusion initiatives to make strongeraccelerate the progress ontowards our goals by the year 2023.

Compensation and Benefits

We strive to provide market competitive compensation, benefits and services that help meet the varying needs of our employees. In addition to salaries and wages, these programs, which vary by country, can include annual bonuses, sales commissions, stock-based compensation awards, defined contribution retirement savings plans with company matching contributions, healthcare and other insurance benefits, flexible spending accounts, health savings account with company matching contributions, unlimited paid time off, paid family leave, and tuition assistance. Certain U.S. facilities have a dedicated medical professional on site to provide basic healthcare

services to employees, provide general first aid, assess employee health risks and promote employee health.  Additionally, all U.S. employees and their families have access to video and telephonic Telemedicine support twenty-four hours a day. Our bonus and commission payment programs allow for higher payouts when goals are exceeded and lower payouts when goals are not met.achieved as planned.

In response to the COVID-19 pandemic, we recognized the importance of retaining and supporting our employees. To further that end, we issued to all of our employees, other than the Chief Executive Officer, the Chief Financial Officer, the Chief Human Resources Officer and the Chief Accounting Officer, a special one-time restricted stock unit grant in April 2020 at a total fair value of $14.4 million in the aggregate. The restricted stock units vested in February 2021. This action was implemented to create an ownership mindset, increase retention, and to provide some certainty and employee engagement in uncertain times. We wanted to create an urgency and focus among all employees to do what was necessary to ensure the Company’s financial health for the duration of the pandemic and through the expected recovery, while preserving our differentiated talent and capabilities throughout the Company.

Growth and Development

We invest significant resources to develop the talent needed to remain at the forefront of innovation and make Novanta an employer of choice. In certain countries, we offer college tuition reimbursement for eligible employees for undergraduate and graduate studies. In 2019, we founded Novanta University as a primary instrument of company-wide learning management. A full-time specialist and the Company’s human resources department coordinate the onboarding of new employees and administer the regular training ofprogram for the entire workforce. Internalworkforce, including both internal and external courses are available for this purpose.training courses. In addition to Novanta University, we utilize our Novanta Growth System, which provides processes, tools, and trainings with a focus on continuous improvement. In 2021, further investment was made in leadership development and diversity, equity and inclusion initiatives with the creation of a department dedicated to deploying the Novanta Way culture through employee resource groups, learning initiatives for all employees and formal leadership development training programs.

Safety and Wellbeing of Our Employees

We provide mandatory safety trainings in our production facilities, which are designed to focus on empowering our employees with the knowledge and tools they need to make safe choices and to mitigate risks. In further support of our employees, we launched the global health and wellness resource center, “NovantaWELL”. The program is designed to give employees support, training, tools and coaching to help them stay healthy.

In response to the COVID-19 pandemic, we have taken proactive, mandatoryaggressive actions to protect the health and safety of our employees. We established steering committees at both the Companycorporate level and at each of our major facilities to provide leadership for and to manage our COVID-19 risk mitigation actions and countermeasures consistently across our locations worldwide.countermeasures. We have provided frequent employee communications that include guidance and updates to our employees with regards to COVID-19 safety procedures and status. We established rigorous safety measures in all of our facilities, including implementing social distancing protocols, requiring working from homeworking-from-home arrangements for those employees that do not need to be physically present on the manufacturing floor or in our facilities to perform their work, suspendingreducing travel, spreading production over more shifts, implementing healthtemperature checks at the entrances to our facilities, frequently disinfecting our workspaces, and providing masks to those employees who need tomust be physically present in our facilities. Many of these actions were at a significant cost to the Company and weWe expect to continue these measures until we determine that the COVID-19 pandemic is adequately contained and the safetyfor purposes of our employees is reasonably assured.business. We may take further actions as government authorities require or recommend or as we determine to be in the best interest of our employees.

Cybersecurity

We have adopted and are implementing the National Institute of Standards and Technology (NIST) Cybersecurity Framework (CSF).  The NIST CSF integrates industry standards and best practices to help organizations manage their cybersecurity risks. The NIST CSF helps organizations understand their cybersecurity risks (threats, vulnerabilities and impacts) and how to reduce these risks with customized measures, such as organization-wide cybersecurity awareness training. Additionally, we maintain cybersecurity insurance to mitigate risks related to cyber-attacks and other security breaches; however, such insurance coverage may be unavailable or insufficient to cover all losses or all types of claims that may arise in the continually evolving areas of cyber risk.

The Company’s Audit Committee is responsible for the oversight of cybersecurity risks. The Audit Committee reviews quarterly with management and internal audit the Company’s cybersecurity program and related matters.  

There have been no material information security breaches for the years ended December 31, 2021, 2020, and 2019, and 2018, respectively. Net expensesExpenses incurred in connection with information security breaches have been immaterial for the years ended December 31, 2021, 2020, 2019, and 2018,2019, respectively.

Government Regulation

Our current and contemplated activities and the products and processes that will result from such activities are subject to substantial government rules and regulations, both in the United States and internationally. Such rules and regulations are subject to change by the governing agencies, and we monitor those changes closely.

Environmental Regulations

Most of our production facilities are subject to various federal, state, local, and/or foreign environmental regulations related to the use, storage, handling, and disposal of regulated materials, chemicals, and certain waste products.

We may face increasing complexity in our product designs and procurement operations due to the evolving nature of product compliance standards. Those standards may impact the material composition of our products entering specific markets. Such regulations went into effect in the European Union (“EU”) in 2006 (“The Restriction of Hazardous Substances Directive” (“RoHS”))

and in 2007 (“Registration, Evaluation, Authorisation and Restriction of Chemicals” (“REACH”)), and in China in 2007 (“Management Methods for Controlling Pollution Caused by Electronic Information Products Regulation” (“China-RoHS”)).

Our capital expenditures, earnings, and competitive position have not been, and are not expected to be, materially affected by our compliance with federal, state, and local environmental provisions that have been enacted or adopted to regulate the distribution of materials into the environment.

Medical Device Regulations

Certain products manufactured by us are integrated into systems by our customers that are subject to regulation by the Federal Food and Drug Administration (“the FDA”). and foreign regulatory authorities. We must comply with certain quality control measurements in order for our products to be effectively used in our customers’ end products. Non-compliance with quality control measurements could result in fines, penalties, and loss of business with our customers.

We are also subject to certain medical device regulations. Medical devices are subject to extensive and rigorous regulation by the FDA and other federal, state, local and local authorities. Theforeign authorities as well as notified bodies. In the United States, the Federal Food, Drug and Cosmetic Act (the “FDCA”) and related regulations govern the conditions of safety, efficacy, clearance, approval, manufacturing, quality system requirements, labeling, packaging, distribution, storage, recordkeeping, reporting, marketing, advertising, and promotion of products.medical devices.

FDA Premarket Clearance and Approval Requirements

Unless an exemption applies, each medical device commercially distributed in the United States requires either FDA clearance of a 510(k) premarket notification or approval of a premarket approval application (“PMA”). Under the FDCA, medical devices are classified into one of three classes—Class I, Class II or Class III—depending on the degree of risk associated with each medical device and the extent of manufacturer and regulatory control needed to ensure its safety and effectiveness. Class I includes devices with the lowest risk to the patient and are those for which safety and effectiveness can be assured by adherence to the FDA’s General Controls for medical devices, which include compliance with the applicable portions of the Quality System Regulation (the “QSR”), facility registration and product listing, reporting of adverse medical events, and truthful and non-misleading labeling, advertising, and promotional materials. Class II devices are subject to the FDA’s General Controls and special controls as deemed necessary by the FDA to ensure the safety and effectiveness of the device. These special controls can include performance standards, postmarket surveillance, patient registries and FDA guidance documents. While most Class I devices are exempt from the 510(k) premarket notification requirement, manufacturers of most Class II devices are required to submit to the FDA a premarket notification under Section 510(k) of the FDCA, requesting permission to commercially distribute the device. The FDA’s permission to commercially distribute a device subject to a 510(k) premarket notification is generally known as 510(k) clearance. Devices deemed by the FDA to pose the greatest risks, such as life-sustaining, life-supporting or some implantable devices, or devices that have a new intended use or use advanced technology that is not substantially equivalent to that of a legally marketed device, are placed in Class III, requiring approval of a PMA. Some pre-amendment devices are unclassified, but are subject to the FDA’s premarket notification and clearance process in order to be commercially distributed. In many cases, our customers are responsible for compliance with the FDA’s requirements applicable to medical devices. However, we also currently market certain Class II medical device products independently that are subject to these requirements.

510(k) Marketing Clearance Pathway

To obtain 510(k) clearance, we must submit to the FDA a premarket notification submission demonstrating that the proposed device is ‘‘substantially equivalent’’ to a predicate device already on the market. A predicate device is a legally marketed device that is not subject to premarket approval, i.e., a device that was legally marketed prior to May 28, 1976 (pre-amendments device) and for which a PMA is not required, a device that has been reclassified from Class III to Class II or Class I, or a device that was found substantially equivalent through the 510(k) process. The FDA’s 510(k) clearance process usually takes from nine to twelve months, but may take significantly longer. The FDA may require additional information, including clinical data, to make a determination regarding substantial equivalence.

If the FDA agrees that the device is substantially equivalent to a predicate device currently on the market, it will grant 510(k) clearance to commercially market the device. If the FDA determines that the device is “not substantially equivalent” to a previously cleared device, the device is automatically designated as a Class III device. The device sponsor must then fulfill more rigorous PMA requirements, or can request a risk-based classification determination for the device in accordance with the “de novo” process, which is a route to market for novel medical devices that are low to moderate risk and are not substantially equivalent to a predicate device.

After a device receives 510(k) marketing clearance, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change or modification in its intended use, will require a new 510(k) marketing clearance or, depending

on the modification, a de novo classification or PMA approval. The FDA requires each manufacturer to determine whether the proposed change requires submission of a 510(k) or a PMA in the first instance, but the FDA can review any such decision and disagree with a manufacturer’s determination. Many minor modifications are accomplished by a letter-to-file in which the manufacturer documents the change in an internal letter-to-file. The letter-to-file is prepared by the manufacturer in lieu of submitting a new 510(k) to obtain clearance for every change. The FDA can always review these letters-to-file in an inspection. If the FDA disagrees with a manufacturer’s determination, the FDA can require the manufacturer to cease marketing and/or request the recall of the modified device until 510(k) marketing clearance or PMA approval is obtained. In these circumstances, we may also be subject to significant regulatory fines or penalties.

Post-market Regulations

After a device is cleared or approved for marketing, numerous and pervasive regulatory requirements continue to apply. These include:

We may be subject to similar foreign laws that may include applicable post-marketing requirements such as safety surveillance. Our manufacturing processes are required to comply with the applicable portions of the QSR, which cover the methods and the facilities and controls for the design, manufacture, testing, production, processes, controls, quality assurance, labeling, packaging, distribution, installation and servicing of finished devices intended for human use. The QSR also requires, among other things, maintenance of a device master file, device history file, and a complaints file. As a manufacturer, we are subject to periodic scheduled or unscheduled inspections by the FDA. Our failure to maintain compliance with the QSR requirements could result in the shut-down of, or restrictions on, our manufacturing operations and the recall or seizure of our products, which would have a material adverse effect on our business. The discovery of previously unknown problems with any of our products, including unanticipated adverse events or adverse events of increasing severity or frequency, whether resulting from the use of the device within the scope of its clearance or off-label by a physician in the practice of medicine, could result in restrictions on the device, including the removal of the product from the market or voluntary or mandatory device recalls.

The FDA has broad regulatory compliance and enforcement powers. If the FDA determines that we failed to comply with applicable regulatory requirements, it can take a variety of compliance or enforcement actions, which may result in any of the following sanctions:

Regulation of Medical Devices in the European Union and U.K.

The European Union (“EU”) has adopted specific directives and regulations regulating the design, manufacture, clinical investigation, conformity assessment, labeling and adverse event reporting for medical devices.

Until May 25, 2021, medical devices were regulated by the Council Directive 93/42/EEC (“Medical Devices Directive”) which has been repealed and replaced by Regulation (EU) No 2017/745 (“Medical Devices Regulation”). Our current certificates have been granted and renewed under the Medical Devices Directive. However, as of May 26, 2021, some of the Medical Devices Regulation requirements apply in place of the corresponding requirements of the Medical Devices Directive with regard to registration of economic operators and of devices, post-market surveillance, market surveillance and vigilance requirements. Pursuing marketing of medical devices in the EU will notably require that our devices be certified under the new regime set forth in the Medical Devices Regulation when our current certificates expire. According to the Medical Devices Regulation several transitional provisions are in place (Article 120) to avoid market disruption and allow a smooth transition from the Medical Devices Directive to the Medical Devices Regulation. Some device certificates issued under the Medical Devices Directive (“MDD certificates”) may remain valid until May 26, 2024, and some devices with MDD certificates may generally continue to be made available on the market or put into service until May 26, 2025, provided that the requirements of the transitional provisions are fulfilled. In particular, the certificate in question must still be valid. During the transition phase, products certified under the Medical Devices Directive and products certified under the Medical Devices Regulation will coexist on the market. Both will have equal status under the law, and no discrimination on eligibility criteria in public tenders may take place.  

Medical Devices Directive

Under the Medical Devices Directive, all medical devices placed on the market in the EU must meet the relevant essential requirements in the Medical Devices Directive, including the requirement that a medical device must be designed and manufactured in such a way that it will not compromise the clinical condition or safety of patients, or the safety and health of users and others.

To demonstrate compliance with the requirements in the Medical Devices Directive, medical device manufacturers must undergo a conformity assessment procedure, which varies according to the type of medical device and its (risk) classification. Specifically, a manufacturer must demonstrate that the device achieves its intended performance during normal conditions of use, that the known and foreseeable risks and any adverse events, are minimized and acceptable when weighed against the benefits of its intended performance, and that any claims made about the performance and safety of the device are supported by suitable evidence. Except for low-risk medical devices (Class I non-sterile, non-measuring devices), where the manufacturer can self-declare the conformity of its products with the essential requirements (except for any parts which relate to sterility or metrology), a conformity assessment procedure requires the intervention of a notified body. If satisfied that a relevant product conforms to the relevant essential requirements, a notified body issues a certificate of conformity, which the manufacturer uses as a basis for its own declaration of conformity. The manufacturer may then apply the European Conformity (“CE”) mark to the device, which allows the device to be placed on the market throughout the EU.

Throughout the term of the certificate of conformity, the manufacturer will be subject to periodic surveillance audits to verify continued compliance with the applicable requirements. In particular, there will be a new audit by the notified body before it will renew the relevant certificate(s).

Medical Devices Regulation

The recently effective Medical Devices Regulation establishes a uniform regulatory framework across the EU for medical devices. Unlike the Medical Devices Directive, the Medical Devices Regulation is directly applicable in EU member states without the need for member states to implement it into national law. The new Medical Devices Regulation, among other things, strengthens the rules on placing devices on the market and reinforces surveillance once they are available and establishes explicit provisions on manufacturers’ responsibilities for the follow-up of the quality, performance and safety of devices placed on the market. As of May 26, 2021, regardless whether the devices are still marketed with MDD certificates, manufacturers must comply with a number of new or reinforced requirements set forth in the Medical Devices Regulation, including the obligations described below. All manufacturers placing medical devices into the market in the EU must comply with the EU medical device vigilance system. Under this system, serious incidents and Field Safety Corrective Actions (“FSCAs”) required to be taken by manufacturers must be reported to the

relevant authorities of the EU member states. FSCAs are defined as any corrective action for technical or medical reasons to prevent or reduce a risk of a serious incident associated with the use of a medical device that is made available on the market. An FSCA may include the recall, modification, exchange, destruction or retrofitting of the device.

The advertising and promotion of medical devices is subject to some general principles set forth in EU legislation. According to the Medical Devices Regulation, only devices that are CE marked may be marketed and advertised in the EU in accordance with their intended purpose. Directive 2006/114/EC concerning misleading and comparative advertising and Directive 2005/29/EC on unfair commercial practices, while not specific to the advertising of medical devices, also apply to the advertising thereof and contain general rules, for example, requiring that advertisements are evidenced, balanced and not misleading. Specific requirements are defined at a national level. EU member states’ laws related to the advertising and promotion of medical devices, which vary between jurisdictions, may limit or restrict the advertising and promotion of products to the general public and may impose limitations on promotional activities with healthcare professionals.

The aforementioned EU rules are generally applicable in the European Economic Area (“EEA”), which consists of the 27 EU member states plus Norway, Liechtenstein and Iceland.

United Kingdom

Since January 1, 2021, the Medicines and Healthcare Products Regulatory Agency (“MHRA”) has become the sovereign regulatory authority responsible for Great Britain’s (i.e. England, Wales and Scotland) medical device market under the Medical Devices Regulations 2002 (“SI 2002 No 618”, as amended) whereas Northern Ireland continues to be governed by EU rules. By July 1, 2023, all medical devices will require a UK Conformity Assessed (“UKCA”) mark in Great Britain, but CE marks issued by EU notified bodies will remain valid until this time. Compliance with this legislation is a prerequisite to be able to affix the UKCA mark to medical devices, without which they cannot be sold or marketed in Great Britain.

For further information regarding EU and U.K. healthcare laws and regulations that our operations are subject to, see “Item 1A. Risk Factors—Risks Relating to Our Business— We are subject to extensive and dynamic medical device regulations, which may impede or hinder the approval, certification or sale of our products and, in some cases, may ultimately result in an inability to obtain approval or certification of certain products or may result in the recall or seizure of previously approved or certified products.”

Other Healthcare Laws and Regulations

In the United States and other jurisdictions where we operate our business, there are healthcare laws and regulations that constrain our business operations, including our sales, marketing and promotional activities, and that limit the kinds of arrangements we may have with customers, physicians, healthcare entities and others in a position to purchase or recommend our products or other products or services we may develop and commercialize. These laws include, without limitation: theThe federal Anti-Kickback Statute which prohibits, among other things, persons and entities from knowingly and willfully soliciting, receiving, offering or paying remuneration to induce, or in return for, either the referral of an individual or the purchase or recommendation of an item or service for which payment may be made under any federal healthcare program; federalprogram. Federal civil and criminal false claims laws and civil monetary penalty laws which prohibit, among other things, individuals or entities from knowingly presenting, or causing to be presented, claims for payment to the federal government, including federal healthcare programs, that are false or fraudulent; thefraudulent. The federal Health Insurance Portability and Accountability Act of 1996 (“HIPAA”) which created additional federal criminal statutes that prohibit, among other things, executing a scheme to defraud any healthcare benefit program and making false statements relating to healthcare matters;matters. HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act of 2009 (“HITECH”), and their implementing regulations, which imposes certain requirements on certain types of individuals and entities relating to the privacy, security and transmission of individually identifiable health information; theinformation. The federal Physician Payments Sunshine Act which requires certain manufacturers of drugs, devices, biologics and medical supplies for which payment is available under Medicare, Medicaid or the Children’s Health Insurance Program to annually report to the federal government information related to payments or other transfers of value made to physicians and teaching hospitals, as well as ownership and investment interests held by physicians and their immediate family members; andmembers. In addition, state and foreign law equivalents of each of the above federal laws which differ from each other in significant ways and may not have the same effect, thus complicating compliance efforts. Violations of these laws may result in substantial civil penalties, including treble damages, and criminal penalties, including imprisonment, fines, the curtailment or restructuring of our operations, and exclusion from participation in governmental healthcare programs. For further information regarding other healthcare laws and regulations that our operations are subject to, see “Item 1A. Risk Factors—Risks Relating to ourOur Business—Our business is indirectly subject to healthcare industry cost containment and healthcare reform measures that could result in reduced sales of our products.”

Data Privacy and Security Laws and Regulations

Numerous state, federal and foreign laws govern the collection, dissemination, use, access to, confidentiality, and security of personal information, including health-related information. In the United States, numerous federal and state laws and regulations,

including data breach notification laws, health information privacy and security laws that govern the collection, use, disclosure, and protection of health-related and other personal information, including HIPAA, could apply to our operations or the operations of our customers. In addition, certain state and non-U.S. laws, such as the California Consumer Privacy Act (“CCPA”), the California Privacy Rights Act (“CPRA”), and the General Data Protection Regulation (“GDPR”), govern the privacy and security of personal information, including health-related information in certain circumstances, some of which are more stringent than HIPAA and many of which differ from each other in significant ways and may not have the same effect, thus complicating compliance efforts. Failure to comply with these laws, where applicable, can result in the imposition of significant civil and/or criminal penalties and private litigation. Privacy and security laws, regulations, and other obligations are constantly evolving, may conflict with each other to make compliance efforts more challenging, and can result in investigations, proceedings, or actions that lead to significant penalties and restrictions on data processing.

Other Information

We maintain a website with the address https://www.novanta.com. We are not including the information contained on our website as part of, or incorporating it by reference into, this Annual Report on Form 10-K. We make available for download, free of charge through our website (https://investors.novanta.com), our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, proxy and information statements, and amendments to these reports as soon as reasonably practicable after we electronically file these materials with, or otherwise furnish them to, the Securities and Exchange Commission (“SEC”). In addition, our reports and other information are filed with securities commissions or other similar authorities in Canada and are available over the Internet at https://www.sedar.com.

Item 1A. Risk Factors

The following risk factors could have a material adverse effect on our business, financial position, results of operations and cash flows and could cause the market value of our common shares to fluctuate or decline. These risk factors may not include all of the important factors that could affect our business or that could cause our future financial results to differ materially from historical or expected results or cause the market price of our common shares to fluctuate or decline.

Risks Relating to Our Business

Our results of operations could be adversely affected by economic and political conditions and the effects of these conditions on our customers’ businesses, capital expenditures and levels of business activities.

A large portion of our product sales are dependent on our customers’ need for increased capacity, productivity and cost saving initiatives, improved product quality and performance, and new investments. Weaknesses in our end markets could negatively impact our revenue and gross margin and consequently have a material adverse effect on our business, financial condition and results of operations. A severe and/or prolonged overall economic downturn or a negative or uncertain political climate could lead to weaknesses in our end markets and adversely affect our customers’ financial condition and the timing or levels of our customers’ capital expenditures or business activity of our customers andactivity. We have experienced significant cyclical end market fluctuations in the industries we serve.past. In particular, diminished growth expectations, economic and political uncertainty in regions across the globe and effects of the COVID-19 pandemic have adversely impacted our customers’ financial condition and ability to maintain product order levels and reduced the demand for our products in 2020. Continued2020 and, to a lesser extent, in 2021. In addition, certain sub-segments of the advanced industrial market that we serve, including the microelectronics and industrial capital equipment sector, are cyclical and have historically experienced periods of oversupply, resulting in downturns in demand for capital equipment in which many of our products are used. It is difficult to predict the timing, length and severity of these downturns and their impact on our business. Further, our order levels or worsening conditionsresults of operations for a given period may not be indicative of order levels or results of operations for subsequent periods. For the foreseeable future, our operations will continue to depend upon industries that are subject to market cycles which, in turn, could further reduceadversely affect the market demand for our productsproducts.

We have also faced increases in inflationary conditions in certain materials and components, and we expect these inflationary conditions to continue in 2022. These inflationary conditions have caused us to increase prices; however, such price increases may not be accepted by our customers or depress pricing formay not adequately offset the increases in our products and have a material adverse effect oncosts, thereby negatively affecting our results of operations. Changes in global economic conditions, including inflationary conditions, could also shift demand for products or services for which we do not have competitive advantages. This could negatively affect the amount of business that we are able to obtain. In addition, if we are unable to successfully anticipate changes in economic and political conditions, we may be unable to effectively plan for and respond to those changes, and our business could be negatively affected.

The COVID-19 pandemic has adversely impacted and is expected to further adversely impacthave prolonged adverse impacts on our business and results of operations.

In 2020, a strain of novel coronavirus disease, COVID-19, was declared a pandemic and spread across the world. The outbreakpandemic and government measures taken in response have had a significant adverse impact, both direct and indirect, on our businessesbusiness and the economy. We have experienced weakened demand from certain customers in the advanced industrial and medical end-markets, which has adversely affected and is expected to continue to adversely affect our revenues.  For example, healthcare providers have, at times, deferred elective medical procedures in order to focus on combatting the pandemic, which has significantly reduced demand for certain of our medical products. Certain other customers have delayed their research and development programs, which has also negatively affected the demand for some of our products. If these trends continue, our revenues will continue to be negatively impacted.

We also faced, and expect to continue to face, difficulty sourcing some materials and components necessary to fulfill production requirements and meeting scheduled shipments due to suppliers’ capacity constraints and shipping and transportation disruptions. These disruptions have adversely affected our ability to manufacture our products and meet our customers’ schedules. If we are not able to mitigate these disruptions were to continue or worsen,effectively, our ability to manufacture our products or meet our customers’ schedules maywould continue to be adversely affected, possibly materially, and our business would be harmed. Even if we are able to find alternate sources of supply for such materials or components, they may cost more or be of lower quality, which could affect our profitability, financial condition and business.

While the impact of the pandemic on our manufacturing capabilities and research and development activities has been limited to date, there can be no assurance that our ability to manufacture our products and to develop new products and technologies will not be disrupted in the future due to sicknessin case of employees, mandatory stay-at-home orders, travel restrictions, social distancing practices, supply interruptionsa resurgence of the pandemic or other potential disruptions. We have also faced, and may face inrelated public health crisis from new mutations of the future, limitations on our employee resources as a result of various causes, including stay-at-home orders from local governments, sickness of employees or their families, or the desire of employees to avoid contact with large groups of people. The pandemic has also diverted management resources and the prolonged work-from-home arrangements have increased business continuity and cybersecurity risks.

virus. The COVID-19 pandemic continues to evolve. The extent to which the outbreakpandemic impacts our business, liquidity and financial results will depend on future developments, which are highly uncertain and cannot be predicted with confidence, such as the continued geographic spread of the disease, the duration of the pandemic, the location, duration and magnitude of future waves of infection, new mutations of the virus, delays in vaccine rollout, the availability, the adoption and effectiveness of vaccines and treatments against the virus and its mutations,variants, travel restrictions and social distancing in the United States, the European Union (“EU”), China and other countries, the duration and extent of business closures or business disruptions and the effectiveness of actions taken to contain and treat the disease.countries. If we or our customers experience prolonged shutdowns or other business disruptions in the future, our ability to conduct our business in the manner and within planned timelines could be materially adversely impacted, and our business and financial results may continue to be adversely affected.

Additionally, concerns over the economic impact of the COVID-19 pandemic have caused extreme volatility in financial and other capital markets. There is no assurance that future resurgence of COVID-19 infections and further economic downturns will not cause volatilities in the capital markets, which may adversely impact our stock price and our ability to access capital markets, such as what occurred in March and April 2020.

Our business depends significantly2020 and at various times in 2021 upon our customers’ capital expenditures, which are subject to cyclical market fluctuations.

Certain sub-segmentsthe discovery of the advanced industrial market that we serve, including the microelectronics and industrial capital equipment markets, are cyclical and have historically experienced periods of oversupply, resulting in downturns in demand for capital equipment in which many of our products are used. It is difficult to predict the timing, length and severity of these downturns and their impact on our business. Further, our order levels or results of operations for a given period may not be indicative of order levels or results of operations for subsequent periods. For the foreseeable future, our operations will continue to depend upon industries that are subject to market cycles which, in turn, could adversely affect the market demand for our products.

We have experienced significant cyclical end market fluctuations in the past. For example, in 2019 and 2020, our sales into the advanced industrial end market declined as a result of a widespread downturn in this end market that is continuing. We cannot predict when slowdowns will recur or that the impact of such slowdowns will be more or less significant compared to historical fluctuations.new variants.

Our business success depends upon our ability to respond to fluctuations in product demand, but doing so may require us to incur costs despite limited visibility into future business declines.

During a period of increasing demand and rapid growth, we must be able to increase manufacturing capacity quickly. Our inability to quickly increase production in response to a surge in demand could prompthas prompted customers to look for alternative sources of supply or leaveand has left our customers without a supply, both of which events could harmhave harmed our reputation and makemade it difficult for us to retain our existing customers or to obtain new customers andcustomers. If this inability to increase production continues or worsens, it could have a material adverse effect on our business.

In periods of weakweaker demand, such as the recent environment in 2020, we have been, and may in the future be, required to reduce costs while maintaining the ability to motivate and retain key employees at the same time. Additionally, to remain competitive, we must continually invest in research and development, which may inhibit our ability to reduce costs in a down cycle. Long product lead-times create a risk that we may purchase inventories or manufacture products that we are unable to sell.

The success of our business depends on our ability to continuously innovate, to introduce new products in a timely manner, and to manage transitions to new product innovations.innovations effectively.

Technology requirements in our markets are constantly changing. We must continually introduce new products that meet evolving customer needs. Our ability to grow depends on the successful development, introduction and market acceptance of new or enhanced products that address our customers’ requirements. Developing new technology is a complex and uncertain process requiring us to accurately anticipate technological and market trends and meet those trends with the right products. Additionally, this requires that we manage the transition from older products to minimize disruption in customer ordering patterns, avoid excess inventory and ensure adequate supplies of new products. Failure to develop new products, failed market acceptance of new products or problems associated with new product transitions could harm our business.

We cannot predict how the market will react to new products introduced by us or to enhancements made to our existing products. If any of our new or enhanced products contain defects or perceived defects or have reliability, quality or compatibility problems or perceived problems, or if our competitors release similar products or enhancements at the same time that are more widely accepted by our customers, our revenue and results of operations for one or more reporting periods could be adversely affected.

If we fail to introduce new products in a timely manner, we may lose market share and be unable to achieve revenue growth targets.

Our research and development efforts may not lead to the successful introduction of products within the time frame that our customers demand. Our competitors may also introduce new or improved products, processes or technologies that make our current or proposed products obsolete or less competitive. We may encounter delays or problemsnot manage the transition from older products effectively to minimize disruption in connection with our researchcustomer ordering patterns, avoid excess inventory and development efforts. Product development delays may result from numerous factors, including:

ensure adequate supplies of new products. New products often take longer to develop, may have fewer features than originally considered desirable, and may have higher costs than initially estimated.estimated, may contain defects or perceived defects or have

reliability, quality or compatibility problems or perceived problems. There have been, and may continue to be, difficultydifficulties in sourcing components for new products and delays in starting volume production. New products may also not be commercially successful. Anysuccessful as we cannot predict how the market will react to new products introduced by us or to enhancements made to our existing products. Failure to develop and introduce new products, failed market acceptance of these adverse developmentsnew products or problems associated with new product transitions could impede our revenue growth, lead to loss of market share, and inability to achievenegatively affect our anticipated revenue growth targets.results of operations and our competitiveness in the market.

Customer order timing and other factors beyond our control may cause our operating results to fluctuate from period to period.

Changes in customer order timing and the existence of certain other factors beyond our control may cause our operating results to fluctuate from period to period. Such factors include:

We received in the past, and may receive in the future, several large orders in one quarter from a customer and then receive no orders from that customer in the next quarter. As a result, the timing of revenue recognition from customer orders can cause significant fluctuations in our operating results from quarter to quarter. In addition, our sales are reactive to changes in our customers’ businesses. For instance, a customer that placed a large order in one period could subsequently experience a downturn in business and, as a result, could cancel an order or reduce the amount of products it purchases from us in future periods.

Delays in shipments near the end of a reporting period due to rescheduling or cancellation by customers or unexpected production delays experienced by us may cause revenue in the period to decline significantly and may have a material adverse effect on our operating results for that period.

In addition, we or our competitors may raise or lower prices of products in response to market demands or competitive pressures. If we lower the prices of our products, or if our competitors lower the prices of their products such that demand for our products weakens, our revenue for one or more quarters may decline and our operating results would be adversely affected.

As a result of these factors, our results of operations for any quarter are not necessarily indicative of results to be expected in future periods.

If we experience a significant disruption in, or breach in security of, our or our third-party providers’ information technology systems, our business may be adversely affected.

We rely on information technology systems, throughout the Companysoftware and services (collectively, “IT Systems”) for internal and external operations.  We operate some of these IT Systems ourselves and also rely on IT Systems provided by third parties to run our business, including to interact with our employees and our customers and suppliers. These interactions include, but are not limited to, ordering and managing materials from suppliers, converting materials to finished products, shipping product to customers, processing transactions, summarizing and reporting results of operations, complying with regulatory, legal and tax requirements, and other processes necessary to manage orders,our business. We do not control our third-party service providers and we do not maintain redundant systems for some of such services, increasing our vulnerability to problems with such services. In addition, in the ordinary course of business, we and our third-party service providers collect, process shipments to customers, manage inventory levels and maintain financial, customer and employeeconfidential business information as well as personal information.

Like other global companies, we have experiencedthere are constant cyber related threats and risks to dataour IT Systems and systems,data, including by internal and external perpetrators of random or targeted malicious cyberattacks, computer viruses, malware, worms, bot attacks or other destructive or disruptive software (for example, ransomware) and attempts to misappropriate customer information and cause system failures and disruptions. Certain other events could also result in the disruption of our systems,IT Systems, including power outages, catastrophes, hardware and software bugs, misconfigurations or failures, and other unforeseen events. We expect the frequency and magnitude of cyberattacks to accelerate as attackers are becoming more sophisticated, for example, by using techniques designed to

circumvent controls, avoid detection, and obfuscate forensic evidence, such that we may be unable to timely or effectively detect, identify, investigate or remediate attacks in the future.

If we were to experience a significant period of disruption in information technology systemsIT Systems that involve our interactions with customers or suppliers, it could result in the loss of revenue and customers as well as significant response and mitigation costs, which would adversely affect our business. In addition, security breaches of our information technology systemsIT Systems could result in the misappropriation or unauthorized disclosure of confidential business or personal information belonging to us or to our employees, partners, customers, suppliers or suppliers,other business partners, which could result in significant financial or reputational damage to us, as well as litigation, regulatory enforcement actions, or other liabilities that could lead to substantial damages, fines, penalties and legal costs. We also expend substantial amounts to protect our information technology systems,IT Systems, and if we were to experience a significant breach in security of our information technology systems,IT Systems, we may need to materially increase such expenditures, which would adversely affect our results of operations.

Risks associatedOur insurance policies may or may not cover various cybersecurity risks and liabilities, and even if coverage exists, there can be no guarantee that any or all costs or losses incurred would be partially or fully insured.

Actual or perceived failures to comply with applicable data protection, privacy issues, including evolvingand security laws, regulations, standards, and associated compliance efforts,other requirements may adversely impact our business and financial results.

Legislation in various countries around the world with regard to cybersecurity, privacy and data protection is rapidly expanding and creating a complex compliance environment. We are subject to many privacy and data protection laws and regulations in the U.S. and around the world, some of which place restrictions on our ability to process personal data across our business. In particular, the General Data Protection Regulation (the “GDPR”), which became effective in May 2018, has caused more stringent data protection requirements in the EU and the European Economic Area (“EEA”). The GDPR imposes onerous accountability obligations requiring data controllers and processors to maintain a record of their data processing and implement policies as part of its mandated privacy governance framework. It also requires data controllers to be transparent and disclose to data subjects how their personal data is to be used; imposes limitations on retention of personal data; introduces mandatory data breach notification requirements; and sets higher standards for data controllers to demonstrate that they have obtained valid consent for certain data processing activities. We are subject to the supervision of local data protection authorities in those EU jurisdictions where we have business operations or are otherwise subject to the GDPR. Certain breaches of the GDPR requirements could result in substantial fines, which can be up to four percent of worldwide revenue or 20 million Euros, whichever is greater. In addition to the foregoing, a breach of the GDPR could result in regulatory investigations, reputational damage, orders to cease/change our use of data, enforcement notices, as well as potential civil claims, including class action type litigation where individuals suffered harm. Among other requirements, the GDPR regulates transfers of personal data subject to the GDPR to third countries that have not been found to provide adequate protection to such personal data, including the United States, and the efficacy and longevity of current transfer mechanisms between the EU and the United States remains uncertain. For example, in 2016, the EU and United States agreed to a transfer framework for data transferred from the EU to the United States, called the Privacy Shield. However, in July 2020, the Court of Justice of the EU (“CJEU”) limited how organizations could lawfully transfer personal data from the EU/EEA to the United States by invalidating the Privacy Shield for purposes of international transfers and imposing further restrictions on use of the standard contractual clauses (“SCCs”) (a standard form of contract approved by the European Commission as an adequate personal data transfer mechanism, and potential alternative to the Privacy Shield). These restrictions include a requirement for companies to carry out a transfer impact assessment which, among other things, assesses the laws governing access to personal data in the recipient country and considers whether supplementary measures that provide privacy protections additional to those provided under SCCs will need to be implemented to ensure an essentially equivalent level of data protection to that afforded in the EEA. The European Commission issued revised SCCs on June 4, 2021 to account for the decision of the CJEU and recommendations made by the European Data Protection Board. The revised SCCs must be used for relevant new data transfers from September 27, 2021 and existing standard contractual clauses arrangements must be migrated to the revised clauses by December 27, 2022. There is some uncertainty around whether the revised clauses can be used for all types of data transfers, particularly whether they can be relied on for data transfers to non-EEA entities subject to the GDPR.

Relatedly, following the United Kingdom’s withdrawal from the EEA and the EU and the expiration of the transition period, fromsince January 1, 2021, companies have had to comply with both the GDPR and the GDPR as incorporated into United Kingdom national law, the latter regime having the ability to separately fine up to the greater of £17.5 million or 4% of global revenue. On January 1, 2021,The relationship between the United Kingdom became a third country forand the purposesEU in relation to certain aspects of data protection law remains unclear, and it is unclear how United Kingdom data protection laws and regulations will develop in the medium to longer term. The European Commission has adopted an adequacy decision in favor of the GDPR.Similarly,United Kingdom, enabling data transfers from EU member states to the United Kingdom without additional safeguards. However, the UK adequacy decision will automatically expire in June 2025 unless the European Commission re-assesses and renews/extends that decision.

In the United States, California has enacted the California Consumer Privacy Act or CCPA,(the “CCPA”), which took effect on January 1, 2020. The CCPA creates individual privacy rights for California consumers and increases the privacy and security obligations of entities handling certain personal data. The CCPA provides for civil penalties for violations, as well as a private right of action for data breaches that is expected to increase data breach litigation. Additionally, the California Privacy Rights Act (the “CPRA”) was recently

enacted in California. The CPRA will impose additional data protection obligations on covered companies doing business in California, including additional consumer rights processes, limitations on data uses, new audit requirements for higher risk data, and opt outsopt-outs for certain uses of sensitive data. It will also create a new California data protection agency authorized to issue substantive regulations and could result in increased privacy and information security enforcement. The majority of the provisions will go into effect on January 1, 2023, and additional compliance investment and potential business process changes may be required. The CCPA and CPRA may increase our compliance costs and potential liability. Many similarSimilar laws have passed in Virginia and Colorado, and have been proposed at the federal level and in other states. Any liability from our failure to comply with the requirements of these laws could adversely affect our financial condition and results of operations.

We have invested, and continue to invest, human and technology resources in our GDPR and CCPA compliance efforts and our data privacy compliance efforts in general. These compliance efforts may be time-intensive and costly. Despite those efforts, there is a risk that we may be subject to fines and penalties, litigation and reputational harm if we fail to protect the privacy of third party data or to comply with the GDPR, CCPA or other applicable regimes.

Changes in foreign currency rates could have a material adverse effect on our financial position, results of operations, and cash flows.

A portion of our revenue is derived from our European and Asian operations and includes transactions in Euros, British Pounds and Japanese Yen, while our products are mainly manufactured in the U.S., the U.K., Germany and China. In the event of a decline in the value of the Euro, British Pounds or Japanese Yen, we would typically experience a decline in our revenues and profit margins. If we increase the selling prices on our products sold in Europe and Asia in order to maintain profit margins and recover costs, we may lose customer sales to lower cost competitors.

Additionally, balances maintained in foreign currencies create additional financial exposure to changing foreign currency rates. If foreign currency rates were to change significantly, we could incur material losses. While we use foreign currency contracts and other risk management techniques to hedge our foreign currency exposure,exposures, we cannot be certain that our efforts will be adequate to protect us against significant foreign currency rate fluctuations or that such efforts will not expose us to additional exchange rate risks.

Our reliance on international operations subjects us to risks not typically faced by companies operating exclusively in the U.S.

During the year ended December 31, 2020,2021, approximately 62% of our revenues were from customers outside of the U.S. The scope of our international operations subjects us to risks that could materially impact our results of operations, including:

We also are subject to risks that our operations outside the U.S. could be conducted by our employees, contractors, service providers, representatives or agents in ways that violate the Foreign Corrupt Practices Act or other similar anti-bribery laws. Any such

violations could have a negative impact on our business and could result in government investigations and/or injunctive, monetary or other penalties. Moreover, our anti-bribery policy and procedures may be violated by third-party sales representatives or other agents that help sell our products or provide other services. Such representatives or agents are not our employees and it may be more difficult to oversee their conduct, which may increase the risk of violations of anti-bribery laws.

Increased outsourcing of components manufacturing to manufacturers outside the U.S. leads to additional risks that could negatively impact our business.

We are increasingly outsourcing the manufacture of subassemblies to suppliers based in China, Southeast Asia and elsewhere overseas in order to reduce our manufacturing cost. However, economic, political or trade problems with foreign countries, increased frequency and severity of extreme weather conditions and natural disasters as a result of global warming, and public health crises could substantially impact our ability to obtain critical parts needed in the timely manufacture of our products, or could substantially increase the costs of these parts. Additionally, this practice increases our vulnerability to the theft of, and reduced protection for, our intellectual property.

Increases in tariffs, trade restrictions or taxes on our products could have an adverse impact on our results of operations.

Our sales channels and supply chain in the international marketplace make us subject to tariffs, trade restrictions and other taxes when the raw materials or components we purchase, and the products we sell, cross international borders. Trade tensions between the U.S. and China, as well as those between the U.S. and some other countries, have escalated in recent years. For example, U.S. tariff impositions against Chinese exports have beenin recent years were followed by retaliatory Chinese tariffs on U.S. exports to China. Certain of the raw materials and components we purchase from China are or were subject to these tariffs, which have increased our manufacturing costs and have made our products less competitive than those of our competitors whose inputs are not subject to these tariffs. Certain of our finished products manufactured in the U.S. have been and may in the future be subject to retaliatory tariffs in China, which increase our costcosts and make our products less competitive than those of our competitors whose products are not subject to such retaliatory tariffs. If heightened tariffs were to be imposed in the future, we may not be able to mitigate thetheir impacts, of such tariffs, and our business, results of operations and financial position could be materially adversely affected. Products we sell into certain other foreign markets could also become subject to retaliatory tariffs, making our products uncompetitive to similar products not subjected to such import tariffs. Further changes in U.S. trade policies, tariffs, taxes, export restrictions or other trade barriers, or restrictions on raw materials or components may limit our ability to produce products, increase our manufacturing costs, decrease our profit margins, reduce the competitiveness of our products, or inhibit our ability to sell products or purchase raw materials or components, which would have a material adverse effect on our business, results of operations and financial condition.

The U.K.’s withdrawal from the EU may have a negative effect on global economic conditions, financial markets and our business, which could reduce the price of our common shares.

We are a multinational company with worldwide operations, including business operations in the U.K., Germany and China. Following a national referendum and enactment of legislation byThe U.K. formally exited the U.K. government, the U.K. withdrew from the European UnionEU, commonly referred to as Brexit, on January 31, 2020 and entered into a transition period. 2020. On December 24,30, 2020, the UKU.K. and the EU announced that they had concluded their negotiations relating to their future trading relationship. The agreed terms are contained insigned the EU—UK Trade and Cooperation Agreement (“TCA”), which became binding on both the EU and the UK on January 1, 2021. Whileincludes an agreement on free trade between the

two parties and went into effect on May 1, 2021.While agreement on the terms of the TCA has avoided a “no deal” Brexit scenario and provides for, in principle, for quota and tariff-free trading of goods, it is nevertheless expected that the TCA will result in the creation of non-tariff barriers (such as increased shipping and regulatory costs and complexities) to the trade in goods between the UK and the EU. Further, the TCA does not provide for the continued free movement of services between the UK and the EU and imposes additional restrictions on the free movement of people between the UK and the EU.

The TCA also grants to each of the UK and the EU the ability, in certain circumstances, to unilaterally impose tariffs on one another. In the event of such an imposition, any additional tariffs may have a material adverse impact on us as well as the stability of UK-EU trade more generally. Any uncertainty as to UK or EU government policies and, in particular, whether any such policy may result in the imposition of reciprocal tariffs, may depress economic activity or have an adverse impact on our business and operations.

It remains to be seen whether the initial implementation of, and adjustment of UK-EU trading processes for, the TCA could increase our costs or otherwise negatively impact our sales of our products, mobility of our personnel and our access to capital.

Others may violate our intellectual property rights and cause us to incur significant costs to protect our rights.

Our future success depends in part upon the protection of our intellectual property rights, including patents, trade secrets, know-how and continuing technological innovation. We do not have personnel dedicated to the oversight, organization and management of our intellectual property. There can be no assurance that the steps we take to protect our intellectual property rights will be adequate to prevent misappropriation or disclosure. It is possible that, despite our efforts, other parties may use, obtain or try to copy our technology and products. There can be no assurance that other companies are not investigating or developing other technologies

similar to ours, that any patents will be issued from any applications filed by us, or that the claims allowed, even if patents are issued, the claims allowed will be sufficient to deter or prohibit others from marketing similar products. In addition, our patents may be challenged, invalidated or circumvented in a legal or administrative proceeding. Policing unauthorized use of our intellectual property rights is difficult and time consuming and may involve initiating claims or litigation against third parties for infringement of our proprietary rights, which could be costly and divert management resources.

Our efforts to protect our intellectual property rights against infringement may not be effective in some foreign countries where we operate or sell our products. If we fail to adequately protect our intellectual property in these countries, we may lose significant business to our competitors.

Our operating results would suffer if we are unable to successfully defend against infringement claims by third parties.

We have received in the past, and could receive in the future, notices from third parties alleging that our products infringe patent or other proprietary rights. These allegations could result in significant costs and diversion of the attention of management. Adverse consequences may also apply if we fail to avoid or successfully defend litigation for infringement or misappropriation of proprietary rights of third parties. We could be required to pay substantial amounts for damages or be enjoined from using the technology deemed to be infringing, or from using, making or selling products deemed to be infringing, any of which could adversely affect our operating results. If we have supplied infringing products to third parties, we may be obligated to indemnify these third parties for any damages that they may be required to pay to the patent holder and for any losses that they may sustain as a result of the infringement.

We operate in highly competitive industries and, if we lose competitive advantages, our business would suffer adverse consequences.

Some of our competition comes from established competitors that have greater financial, engineering, manufacturing and marketing resources than we do. Our competitors will continue to improve the design and performance of their existing products and introduce new products. It is possible that we may not successfully differentiate our current and proposed products from the products of our competitors, or that the marketplace will not consider our products to be superior to competing products. To remain competitive, we will be required to invest heavily in research and development, marketing and customer service and support. However, we may not be able to make the necessary technological advances to maintain our competitive position and our products may not receive market acceptance. These factors would cause us not to be able to compete successfully in the future. Increased competition may also result in price reductions, reduced profit margins, loss of market share and an inability to generate cash flows that are sufficient to maintain or expand our new product development programs.

Our results of operations will be adversely affected if we fail to successfully integrate recent and future acquisitions or to grow the acquired businesses.businesses as planned.

As part of our business strategy, we expect to broaden our product and service offerings by acquiring businesses, technologies, assets and product lines that, we believe, complement or expand our existing businesses. In recent years, we have made a number of acquisitions, including the acquisitions of ATI Industrial Automation, Inc., Schneider Electric Motion USA, Inc., ARGES GmbH, Med X Change,Inc., and Ingenia-CAT, S.L., and Zettlex Holdings Limited, and

we expect to continue to make acquisitions in the future. We may fail to successfully identify appropriate acquisition candidates or integrate acquired businesses, products, technologies or personnel into our businesses and, as a result, may fail to realize the synergies, cost savings and other benefits expected from the acquisitions. If we are not able to successfully achieve these objectives, the anticipated benefits of such acquisitions may not be realized fully or at all, and our results of operations could be adversely affected. As a result of the number of recent and expected future acquisitions in a relatively short amount of time, these risks may be heightened due to limited resources available to integrate these new businesses. Our acquisition activities may divert management’s attention from our regular operations. Managing a larger and more geographically dispersed operation and product portfolio could also pose challenges for our management team.

Further, our ability to maintain and increase profitability of acquired businesses will depend on our ability to manage and control operating expenses and to generate and sustain increased levels of revenue. Our expectations to achieve more consistent and predictable levels of revenue and to increase profitability as a result of any acquisition may not be realized. Such revenues and profitability may even decline as we integrate newly acquired operations into our existing businesses. We may fail to identify inherent weaknesses in acquired businesses or misinterpret market and technology trends and growth potentials during our acquisition due diligence process. If revenues of acquired businesses decline or grow more slowly than we anticipate, or if their operating expenses are higher than we expect, we may not be able to sustain or increase their profitability, in which case we may not be able to realize the expected return on our investments, our financial condition will suffer and our stock price could decline. In addition, through our acquisitions, we may assume liabilities, losses or costs for which we are not indemnified or insured or for which our indemnity or insurance is inadequate. Any such liabilities may have a material adverse effect on our financial position or results of operations.

If we do not attract and retain our key personnel, our ability to execute our business strategy will be limited.

Our success depends, to a significant extent, upon the continued service of our executive officers, key management and technical personnel, particularly our experienced engineers, and upon our ability to continue to attract, retain, and motivate qualified personnel. TheWe have recently experienced increased turnover of key personnel, and the competition for theseskilled employees is intense. The lossWe have incurred increased expenses in connection with the retention of the servicesexisting key personnel and hiring of one or morenew employees, and we expect these increased costs to continue. Additional losses of our key personnel could have a material adverse effect on our operating results. In addition, there could be a material adverse effect on us shouldif the turnover rates for engineers and other key personnel increase significantly or if we are unable to continue to attract qualified personnel. The costs to retain or hire employees could also increase more than we expect.

Our success also depends on our ability to execute leadership succession plans. The inability to successfully transition key management roles could have a material adverse effect on our operating results.

We have undertaken restructuring and realignment activities in the past, and we will continue to assess our operating and cost structure in the future. These actions may not improve our financial position, and may ultimately prove detrimental to our operations and sales.

We have undertaken restructuring and realignment activities in the past, and we will continue to assess our operating and cost structure in the future. Our ability to reduce operating expenses and improve gross margin is dependent upon the nature of the actions we take and our subsequent ability to implement those actions and realize the expected cost savings and gross margin improvements. We are taking, and may need to take in the future, additional restructuring actions, such as eliminating or consolidating certain of our facilities or operations, reducing our headcount, or eliminating certain positions. Failure to successfully implement such restructuring activities could adversely affect our ability to meet customer demand for our products and could increase the cost of production versus our projections, both of which could adversely impact our operating results. Further, expenses and cost inefficiencies associated with our restructuring activities, including severance costs and the loss of trained employees with knowledge of our business and operations, could exceed our expectations and negatively impact our financial results. We are also taking actions to improve our price realization, reduce our overhead and cost of poor quality, and improve our material productivity. Failure to successfully implement these actions could negatively impact our ability to achieve our gross margin goals.

Product defects or problems with integrating our products with other vendors’ products used by our customers may seriously harm our business and reputation.

We produce complex products that can contain latent defects or performance problems. This could happen to both existing and new products. Such defects or performance problems could result in litigation against us and be detrimental to our business and reputation.

In addition, customers frequently integrate our products with other vendors’ products. When problems occur in a combined environment, it may be difficult to identify the source of the problem. These problems may cause us to incur significant warranty and repair costs, divert the attention of our engineering personnel from our product development efforts, and cause significant customer relationship issues, any of which could adversely affect our results of operations and financial condition.

Disruptions in the supply of certain key components and other goods from our suppliers, including limited or single source suppliers, could have an adverse effect onadversely affected the results of our business operations, and could damage our relationships with customers.

The production of our products requires a wide variety of raw materials, key components and other goods that are generally available from alternate sources of supply. However, certain critical raw materials, key components and other goods required for the production of some of our principal products are available from limited or a single source of supply. If aCertain single source supplier decidessuppliers of key components for us have decided to stop producing some of these components. If we fail to find alternative sources, redesign our products or otherwise manage this transition effectively, our business would be adversely impacted. If additional single source suppliers decide to stop producing a key component for us, or if the receipt of certain limited source or single source materials is otherwise delayed, our relationship with customers may be harmed if such decisions or delays cause us to miss our scheduled shipment deadlines.deadlines and our business could be adversely affected. Our current or alternative sources may not be able to continue to meet all of our demands on a timely basis. If suppliers or subcontractors experience difficulties or fail to meet our manufacturing requirements, our business would be harmed until we are able to secure alternative sources, if any, on commercially reasonable terms. A prolonged inability to obtain certain raw materials, key components or other goods is possible and could have a significant adverse effect on our business operations, damage our relationships with customers, or even lead to permanent loss of customer orders.

In addition, certain of our businesses buy components, including limited or sole source items, from competitors of our other businesses. This dynamic may adversely impact our relationship with these suppliers. For example, these suppliers could increase the

price of those components or reduce their supply of those components to us, which could have a significant adverse effect on our business operations or lead to permanent loss of customer orders.

If we fail to accurately forecast component and raw material requirements for our products, we could incur additional costs and experience significant delays in shipments, which could have an adverse effect on the results of our business operations, and could damage our relationships with customers.

We use rolling forecasts based on anticipated product orders to determine our production requirements. It is important that we accurately predict both the demand for our products and the lead times required to obtain the necessary components and raw materials to manufacture our products. Lead times for our components and raw materials vary significantly and depend on multiple factors, including the specific supplier requirements, the size of the order, contract terms and current market demand. For substantial increases in our sales levels of certain products, some of our suppliers may need significant lead time. If we overestimate our component and raw material requirements, we may have excess inventory, which would increase our costs. If we underestimate our component and raw material requirements, we may have inadequate inventory, which could interrupt and delay delivery of our products to customers. Any of these occurrences could adversely affect our results of operations and damage our relationships with customers.

Production difficulties and product delivery delays or disruptions could have a material adverse effect on our business.

We assemble our products at our facilities in the U.S., the U.K., Germany and China. Each of our products is typically manufactured in a single manufacturing location. We have recently experienced factory disruptions at certain of our U.K. and China facilities. If our production activities at any of our manufacturing facilities were again disrupted, including by amandatory power consumption reductions, natural disaster,disasters or other weather events, health epidemic, and actepidemics, acts of terrorism or otherwise, our operations would be negatively impacted until we could establish alternative production and service operations. Significant production difficulties could also be the result of:

From time to time, we determinemake decisions to consolidate or move certain of our manufacturing facilities, or otherwise move our production of certain products to another facility.facility, including the ongoing move of our air bearing spindles manufacturing from one of our U.K. sites to our facility in China and the ongoing move of our beryllium mirror manufacturing operation to a new facility within the U.K. Moving complicated manufacturing facilities involves various risks, including the inability to commence production within the cost and timeframe estimated, damage to equipment, inability to produce a high-quality product, shipping and customs delays, travel and technology restrictions, tax issues, distraction to management and employees, and the inability to hire and retain a sufficient number of qualified personnel. Failure to successfully move manufacturing facilities due to these and other unforeseen risks could adversely affect our ability to meet customer demand, harm our relationships with customers, and adversely impact our results of operations and financial position.

In addition, we may experience product delivery delays in the future. We ship a significant portion of our products to our customers through independent package delivery and import/export companies. We also ship our products through national trucking firms, overnight carrier services and local delivery practices. If one or more of the key package delivery or import/export providers experience significant disruption in services or institutes a significant price increase, the delivery of our products could be disrupted or delayed. Such events could cause us to incur increased shipping costs that could not be passed on to our customers, negatively impacting our profitability and our relationships with customers.

We are subject to extensive and dynamic medical device regulation,regulations, which may impede or hinder the approval, certification or sale of our products and, in some cases, may ultimately result in an inability to obtain approval or certification of certain products or may result in the recall or seizure of previously approved or certified products.

Some of our products and the related sales and marketing development activities and manufacturing processes are subject to extensive and rigorous regulation by the FDA pursuant to the Federal Food, Drug, and Cosmetic Act (the “FDCA”), by comparable agencies in foreign countries, and by other regulatory agencies and governing bodies. Under the FDCA, medical devices must receive

FDA clearance or approval or an exemption from such clearance or approval before they can be commercially marketed in the U.S. In the EU, we are required tomedical devices must comply with applicablethe EU Medical Devices Regulation (Regulation (EU) No 2017/745). To demonstrate compliance with the general safety and performance requirements, medical devices must undergo a conformity assessment procedure, which varies according to the type of medical device directives (includingand its risk classification. Except for low risk medical devices (Class I), where the Medical Devices Directive)manufacturer can self-assess the conformity of its products with the general safety and performance requirements (except for any parts which relate to obtain CE Mark certificationsterility, metrology or reuse aspects), a conformity assessment procedure requires the intervention of a notified body. Compliance with these requirements is a prerequisite to be able to affix the European Conformity (“CE”) mark to medical devices, without which they cannot be sold or marketed in order to market medical devices. The CE Mark is applied following approval from an independent notified body or declaration of conformity.the EU. The process of obtaining marketing approval, certification or clearance from the FDA or by comparable agencies in foreign countries for new products, or with respect to enhancements or modifications to existing products, could:

In addition, exported devices are subject to the regulatory requirements of each country to which the device is exported. Some countries do not have medical device regulations, but in most foreign countries, medical devices are regulated. Most countries outside of the U.S. require that product approvals be renewed or recertified on a regular basis, generally every four to five years. The renewal or recertification process requires that we evaluate any device changes and any new regulations or standards relevant to the device and conduct appropriate testing to document continued compliance. Where renewal or recertification applications are required, they may need to be renewed and/or approved or certified in order for us to continue selling our products in those countries. There can be no assurance that we will receive the required approvals or certification for new products or modifications to existing products on a timely basis or that any approval or certification will not be subsequently withdrawn or conditioned upon extensive post-market study requirements.

In April 2017, the European Parliament passed the Medical Devices Regulation (Regulation 2017/745), which repeals and replaces the EU Medical Devices Directive and the Active Implantable Medical Devices Directive. Unlike directives, which must be implemented into the national laws of the member states of EEA, the regulations would be directly applicable, i.e., without the need for adoption of EEA member state laws implementing them, in all EEA member states and are intended to eliminate current differences in the regulation of medical devices among EEA member states. The Medical Devices Regulation (“MDR”), among other things, is intended to establish a uniform, transparent, predictable and sustainable regulatory framework across the EEA for medical devices and ensure a high level of safety and health while supporting innovation. The MDR was meant to become applicable in May 2020. However, on April 23, 2020, the European Council and Parliament postponed the effective date of the MDR to May 2021. Once applicable, the MDR will among other things:

We face uncertainties as the MDR is rolled out and enforced by the European Commission and EU competent authorities, creating risks in several areas including the CE Marking process and data transparency in the upcoming years.

The FDA and other worldwide regulatory agencies actively monitor compliance with local laws and regulations through review, inspection and inspectionaudit of design and manufacturing practices, recordkeeping, reporting of adverse events, labeling and promotional practices. The FDA and other regulatory agencies worldwide can ban certain medical devices; detain or seize adulterated or misbranded medical devices; order recall, repair, replacement or refund of these devices; and require notification of healthcare professionals and others with regard to medical devices that present unreasonable risks of substantial harm to the public health. The FDA and other worldwide regulatory agencies can take action against a company that promotes "off-label" uses. The FDA may also enjoin and restrain a company for certain violations of the FDCA and regulations pertaining to medical devices, or initiate action for criminal prosecution of such violations. Similar requirements apply in foreign jurisdictions. Any adverse regulatory action, depending on its magnitude, may restrict a company from effectively marketing and selling its products, may limit a company's ability to obtain future premarket clearances, approvals or approvals,certifications, and could result in a substantial modification to the company's business practices and operations. International sales of medical devices manufactured in the U.S. that are not approved by the FDA for use in the U.S., or that are banned or deviate from lawful performance standards, are subject to FDA export requirements.

Regulations regarding the development, manufacture and sale of medical devices are evolving and subject to future changes. For instance, the landscape concerning medical devices in the EU recently evolved. On May 25, 2017, the EU Medical Devices Regulation entered into force, which repeals and replaces the EU Medical Devices Directive and the Active Implantable Medical Devices Directive. Unlike directives, which must be implemented into the national laws of the EU member states, regulations are directly applicable (i.e., without the need for adoption of EU member state laws implementing them) in all EU member states and are intended to eliminate current differences in the regulation of medical devices among EU member states. The Medical Devices Regulation is intended to establish a uniform regulatory framework across the EU for medical devices. These modifications may have an effect on the way we intend to develop our business in the EU and EEA.

From time to time, legislation is drafted and introduced in Congress that could significantly change the statutory provisions governing the regulation of medical devices. The FDA may also change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions that may prevent or delay approval or clearance of our future products under development or impact our ability to modify our currently cleared products on a timely basis. Over the last several years, the FDA has proposed reforms to its 510(k) clearance process, and such proposals could include increased requirements for clinical data and a longer review period, or could make it more difficult for manufacturers to utilize the 510(k) clearance process for their products. In addition, FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business and our products. Any new statutes, regulations, or revisions or reinterpretations of existing regulations may impose additional costs, lengthen regulatory review time for, or make it more difficult to obtain approval for, the manufacturing, marketing or distribution of our products. Such changes could, among other things, require additional testing prior to obtaining clearance or

approval, changes to manufacturing methods, recall, replacement or discontinuance of our products, or require additional record keeping.

Failure to comply with regulatory requirements could have a material adverse effect on our business, financial condition and results of operations. Later discovery of previously unknown problems with a product or manufacturer could result in fines, delays or suspensions of regulatory clearances, approvals or approvals,certification, seizures or recalls of products, physician advisories or other field actions, operating restrictions and/or criminal prosecution. We may also initiate field actions as a result of a failure to strictly comply with our internal quality policies. The failure to receive product approval clearance or certification on a timely basis, suspensions of regulatory clearances or certifications, seizures or recalls of products, physician advisories or other field actions, or the withdrawal of product approval or certification by the FDA or byother comparable agencies in foreign countries could have a material adverse effect on our business, financial condition and results of operations.

Our products and operations are subject to various foreign and U.S. federal and state healthcare laws and regulations, which could expose us to penalties.

Our products and our operations may be directly, or indirectly through our customers, subject to various foreign and U.S. federal and state healthcare laws and regulations, including, without limitation, anti-kickback, false claims and privacy statutes. These laws may restrict, among other things, the development, sale, marketing and distribution of our products. These laws include:

Efforts to ensure that our business operations comply with applicable healthcare laws may involve substantial costs. If our operations are found to be in violation of any of these laws or any other governmental regulations that may apply to us, we may be subject to, without limitation, civil, criminal and administrative penalties, damages, monetary fines, disgorgement, possible exclusion from participation in governmental healthcare programs, contractual damages, reputational harm, diminished profits and future earnings and curtailment or restructuring of our operations. Further, defending against any such actions can be costly, time-consuming and may require significant financial and personnel resources. Therefore, even if we are successful in defending against any such actions that may be brought against us, our business may be impaired.

Our business is indirectly subject to healthcare industry cost containment and healthcare reform measures that could result in reduced sales of our products.

Several of our customers rely on third party payors, such as government programs and private health insurance plans, to reimburse some or all of the cost of the procedures in which our products are used. The continuing efforts of governments, insurance companies and other payors of healthcare costs to contain or reduce those costs could lead to patients being unable to obtain approval for payment from these third-party payors for procedures in which our products are used. If that occurs, sales of medical devices may decline significantly and our customers may reduce or eliminate purchases of our products, or demand further price reductions. The cost containment measures that healthcare payors are instituting both in the U.S. and internationally could reduce our revenues and harm our operating results.

In addition, in the U.S. and other jurisdictions, there have been, and we expect there will continue to be, a number of legislative and regulatory changes and proposed changes to reform healthcare systems. Various elements of healthcare reforms, such as comparative effectiveness research, an independent payment advisory board, payment system reforms, including shared savings pilots, and other provisions, could meaningfully change the way healthcare is developed and delivered and may have material adverse impact on numerous aspects of our business, results of operations and financial condition.

Changes in government regulations related to our business or our products could reduce demand for our products or increase our expenses.

We are subject to many governmental regulations, including, but not limited to, the laser radiation safety regulations of the Radiation Control for Health and Safety Act administered by the Center for Devices and Radiological Health, a branch of the FDA, and certain health regulations related to the manufacture of products using beryllium, an element used in some of our products. Among other things, these regulations require us to file annual reports, to maintain quality control and sales records, to perform product testing, to distribute appropriate operating manuals, to conduct safety reviews, to incorporate design and operating features in products sold to end-users, and to certify and label our products. Depending on the class of the product, various warning labels must be affixed and certain protective devices must be installed.

We are also subject to regulatory oversight, including comparable enforcement mechanisms, in the markets we serve. We compete in many markets in which we and our customers must comply with federal, state, local and international regulations, such as environmental, health and safety and food and drug regulations. We develop, configure and market our products to meet customer needs created by those regulations. Any significant changes could reduce demand for our products or increase our expenses, which in turn could adversely affect our business, financial condition and results of operations.

Compliance or the failure to comply with current and future environmental regulations could result in significant costs.

Our operations are subject to a variety of federal, state, local and international environmental regulations relating to the manufacture of products using beryllium. We are subject to regulations of the Environmental Protection Agency in the U.S. and comparable authorities in other countries. If we fail to comply with any present or future regulations, we could be subject to regulatory fines.

Future developments, administrative actions or liabilities relating to environmental matters could have a material adverse effect on our business, results of operations or financial condition. It is difficult to anticipate how such regulations will be implemented and enforced. We continue to evaluate the necessary steps for compliance with regulations as they are enacted. Certain regulations may require us to redesign our products to ensure compliance with the applicable standards. These redesigns may adversely affect the performance of our products, add greater testing lead-times for product introductions and reduce our profitability.

If we fail to implement new information technology systems successfully, our business could be adversely affected.

We rely on centralized information systems throughout the Company to keep financial records, process orders, manage inventory, process shipments to customers, and operate other critical functions. We are in the process of upgradingoften need to upgrade our information technology infrastructure, including implementing new or upgrading existing enterprise resource planning (“ERP”) systems and other complementary information technology systems. We have invested, and will continue to invest, significant capital and human resources in the upgrades and new ERP systems. Any disruptions, delays or deficiencies in the transition, design and implementation of the upgrades and new ERP systems, particularly any disruptions, delays or deficiencies that impact our operations, could have a material adverse effect on our results of operations and cash flows.

We may experience difficulties as we transition to these new or upgraded systems and processes, including loss of data and the ability to process customer orders, ship products, provide services and support to our customers, issue sales invoices, collect accounts receivable, fulfill contractual obligations, satisfy internal and external financial reporting requirements in a timely manner, or otherwise run our business. We may also experience decreases in productivity as our personnel implement these systems and become proficient in the new systems. In addition, as we are dependent upon our ability to gather and promptly transmit accurate information to key decision makers, our business, results of operations and financial condition may be materially and adversely affected if our information technology infrastructure does not allow us to transmit accurate information, even for a short period of time. Furthermore, the transition, design and implementation of upgrades and new or upgraded ERP systems may be much more costly than we anticipated.

Our results of operations will be adversely affected if we fail to realize the full value of our intangible assets.

As of December 31, 2020,2021, we had $434.5$700.5 million of net intangible assets, including goodwill, on our consolidated balance sheet. Net intangible assets consist principally of goodwill, customer relationships, patents, trademarks, core technologies and technology licenses. Goodwill and indefinite-lived intangible assets are tested for impairment at least on an annual basis. All other intangible assets are evaluated for impairment should discrete events occur that call into question the recoverability of the intangible assets.

Adverse changes in our business, adverse changes in the assumptions used to determine the fair value of our reporting units, or the failure to grow our businesses may result in an impairment of our intangible assets, which could adversely affect our results of operations.

Our reliance upon third party distribution channelsOEM customers subjects us to credit, inventory, business concentration, and business failure risks beyond our control.

We sell many of our products through resellers, distributors, and system integrators. As these third parties tend to have more limited financial resources than OEM and end-user customers, they generally represent sources of increased credit risk. Any significant downturn in the business of our resellers, distributors, and systems integrators would in turn harm our results of operations and financial condition.

Our sales also depend upon the ability of our OEM customers to develop and sell systems that incorporate our products. Adverse economic conditions, large inventory positions, limited marketing resources and other factors influencing these OEM customers could have a substantial adverse effect on our financial results. We cannot assure investors that our OEM customers will not experience financial or other difficulties that could adversely affect their operations and, in turn, adversely affect our results of operations and financial condition.

Increasing scrutiny and changing expectations from investors, customers, and governments with respect to Environmental, Social and Governance ("ESG") policies and practices may cause us to incur additional costs or expose us to additional risks.

There has been increasing public focus and scrutiny from investors, governmental and nongovernmental organizations, and customers on corporate ESG practices.  We are making efforts to respond to public expectations and to demonstrate our commitment to sustainability and sound ESG policies and practices. However, our ESG practices may not meet the standards of all of our stakeholders and advocacy groups may campaign for further changes. Many of our large, global customers are also committing to long-term targets to reduce greenhouse gas emissions within their supply chains. If we are unable to support customers in achieving these reductions, we may lose revenue if our customers find other suppliers who are better able to support such reductions. A failure, or perceived failure, to respond to expectations of all parties could cause harm to our business and reputation and have a negative impact on the market price of our common shares. New government regulations could also result in new environmental regulations and new or more stringent forms of ESG oversight and disclosures which may lead to increased expenditures for sustainability initiatives. In addition, concern over climate change and sustainability has led to foreign and domestic legislative and regulatory initiatives directed at limiting carbon dioxide and other greenhouse gas emissions. We may experience increased costs in order to execute upon our sustainability goals and comply with future climate-change related government mandates as well as environmental protection laws, which could have an adverse impact on our results of operations and financial condition. Certain regulations may require us to redesign our products to ensure compliance with the applicable standards. These redesigns may adversely affect the performance of our products, add greater testing lead-times for product introductions and reduce our profitability.

Risks Relating to Taxes

Novanta Inc. may be subject to U.S. federal income taxation even though it is a non-U.S. corporation.

Novanta Inc. is a holding company organized in Canada and is subject to Canadian tax laws. However, we are also subject to U.S. tax rules and file U.S. federal income tax returns for our operations in the U.S. In addition, distributions or payments from entities in one jurisdiction to entities in another jurisdiction may be subject to income and/or withholding taxes. We do not intend to operate in a manner that will cause Novanta Inc. to be treated as engaged in a U.S. trade or business or otherwise be subject to U.S. federal income taxes on its income, but it generally will be subject to U.S. federal withholding tax on certain U.S.-sourced passive income items, such as dividends, royalties and certain types of interest.

Risks Relating to Our Common Shares and Our Capital Structure

We may require additional capital to adequately respond to business challenges or opportunities and repay or refinance our existing indebtedness, but this capital may not be available on acceptable terms or at all.

We may require additional capital to adequately respond to future business challenges or opportunities, including, but not limited to, the need to develop new products or enhance our existing products, the need to invest in cloud-based enterprise resource planning systems and other digital technology platforms to help accelerate the growth of our businesses, the need to build inventory or to invest other cash to support business growth, and opportunities to acquire complementary businesses and technologies.

As of December 31, 2020,2021, we had outstanding debt of $204.8$438.6 million under our amended and restated senior secured credit agreement (as amended, the “Third Amended and Restated Credit Agreement”) and $395.2$348.4 million available to be drawn under the revolving credit facility. If we are unable to satisfy the conditions in the Third Amended and Restated Credit Agreement or our needs exceed the amounts available under the revolving credit facility, we may need to engage in equity or debt financings to obtain additional funds. If we raise additional funds through further issuances of equity or convertible debt securities, our existing shareholders could suffer significant dilution. Any new equity securities we issue could have rights, preferences and privileges superior to those of the holders of our common shares. Further, our Third Amended and Restated Credit Agreement restricts our ability to obtain additional debt financing from other sources. If we are unable to obtain adequate financing or obtain financing on

terms satisfactory to us when we need it, our ability to continue to support our business growth and to respond to business challenges could be significantly limited. In addition, the terms of any additional equity or debt issuances may adversely affect the value and price of our common shares.

Our existing indebtedness could adversely affect our future business, financial condition and results of operations.

As of December 31, 2020,2021, we had $204.8$438.6 million of outstanding debt. This level of debt could have significant consequences on our future operations, including:

Any of these factors could have an adverse effect on our business, results of operations and financial condition.

In addition, as a global corporation, we have significant cash reserves held in foreign countries. Some of these balances may not be immediately available to repay our debt.

Our Third Amended and Restated Credit Agreement, as amended, contains covenants that limit our ability to engage in activities that may be in our long-term best interests. Our failure to comply with those covenants could result in an event of default which, if not cured or waived, could result in the acceleration of all of our borrowings thereunder.

General Risk Factors

The market price for our common shares may be volatile.

The market price of our common shares could be subject to wide fluctuations. These fluctuations could be caused by:

In addition, the stock market has experienced extreme price and volume fluctuations in recent years. These fluctuations have had a substantial effect on the market prices of many companies, often unrelated to the operating performance of the specific companies. These market fluctuations could adversely affect the price of our common shares.

Our effective tax rate is subject to fluctuation, which could impact our financial position and earnings per share.

Our effective tax rate is subject to fluctuation as the effective income tax rate for each year is a function of (a) taxable income levels in numerous tax jurisdictions with varying tax rates, (b) our ability to utilize recognized deferred tax assets, (c) taxes, interest, and/or penalties resulting from tax audits and, (d) credits and deductions as a percentage of total taxable income. From time to time, the U.S., foreign and state governments make substantive changes to tax rules where significant judgment is required to determine the impact of such changes on our provision for income taxes, which may result in increased costs. Further, such tax law changes may cause our effective tax rate to fluctuate between periods.

We are exposed to the credit risk of some of our customers and to credit exposures in weakened markets, which could adversely affect our results of operations.

Customers with liquidity issues may lead to additional bad debt expense. There can be no assurance that our open credit customers will pay the amounts they owe to us or that the reserves we maintain will be adequate to cover such credit exposures. In addition, to the extent that turmoil in the credit markets or increases in interest rates make it more difficult for some customers to obtain financing, their ability to pay may be adversely impacted. Our customers’ failure to pay and/or our failure to maintain sufficient reserves could have a material adverse effect on our future cash flows and financial condition.

If we fail to maintain appropriate internal controls in the future, we may not be able to report our financial results accurately, which may adversely affect our stock price and our business.

While our management and our independent registered public accounting firm concluded that our internal control over financial reporting was effective as of December 31, 2020,2021, it is possible that material weaknesses may be identified in the future.

As part of our growth strategy, we intend to make additional acquisitions of privately held businesses. Prior to becoming part of our consolidated company, the acquired businesses would not be required to implement or maintain the disclosure controls and procedures or internal control over financial reporting that are required of public companies. We are required to integrate the acquired businesses into our consolidated company’s system of disclosure controls and procedures and internal control over financial reporting, but we cannot provide assurance as to how long the integration process may take. Additionally, we may need to improve our internal control or those of any business we acquire and may be required to design enhanced processes and controls in order to make such improvements.acquire. This could result in significant costs to us and could require us to divert substantial resources, including management time and attention, from other activities.resources.

If we are unable to maintain effective internal controls, we may not have adequate, accurate or timely financial information, and we may be unable to meet our reporting obligations as a publicly traded company or to comply with the requirements of the SEC or the Sarbanes-Oxley Act of 2002. This could result in a restatement of our financial statements, the imposition of sanctions, including the inability of registered broker dealers to make a market in our common shares, or investigation by regulatory authorities. Any such action or other negative results caused by our inability to meet our internal control and financial reporting requirements or to comply with legal and regulatory requirements could adversely affect our business and the trading price of our common shares. Material weaknesses in our internal control over financial reporting could also reduce our ability to obtain financing or could increase the cost of any financing we obtain.

Item 1B. Unresolved Staff Comments

None.

Item 2. Properties

Our principal owned and leased properties as of December 31, 20202021 are listed in the table below.

Additional manufacturing, research and development, sales, service and logistics sites are located in California, Connecticut, Florida, Michigan, New York, Arizona and Oregon within the United States, and in Germany, United Kingdom,China, Czech Republic, Germany, Italy, Japan, China,Mexico, Spain and Italy.United Kingdom. These additional facilities cover approximately 360,000530,000 square feet, of which approximately 300,000420,000 square feet are leased and approximately 60,000110,000 square feet are owned. These facilities are used by our Photonics, Vision and Precision Motion segments.

We consider our facilities suitable and adequate for the purposes for which they are used and do not anticipate difficulty in renewing existing leases or in finding alternative facilities. We believe all our properties have been properly maintained.

Item 3. Legal Proceedings

The Company is subject to various legal proceedings and claims that arise in the ordinary course of business. See Note 17 to Consolidated Financial Statements for additional information about legal proceedings involving the Company.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Shares, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information

The Company’s common shares, no par value, are traded on the Nasdaq Global Select Market under the ticker symbol “NOVT”.

Holders

As of the close of business on February 22, 2021,21, 2022, there were approximately 3332 holders of record of the Company’s common shares. Since many of the common shares are registered in “nominee” or “street” names, the Company believes that the total number of beneficial owners is considerably higher.

Dividend Policy

The Company has never declared or paid cash dividends on its common shares and does not anticipate paying any cash dividends in the foreseeable future.

Recent Sales of Unregistered Securities

None

Purchases of Equity Securities by the Issuer and Affiliated Purchaser

In October 2018, the Company’s Board of Directors authorizedapproved a share repurchase plan (the “2018 Repurchase Plan”) for, authorizing the repurchase of up to $25.0 million worth of the Company’s common shares. In February 2020, the Company’s Board of Directors approved a new share repurchase plan (the “2020 Repurchase Plan”), authorizing the repurchase of up to an aggregate of $25.0additional $50.0 million worth of the Company’s common shares. The 2018 Repurchase Plan doesWhile these share repurchase plans are intended to generally offset dilutions from equity awards granted to our employees and directors, we are not obligate the Companyobligated to acquire any particular amount of our common shares. No time limit was set for the completion of the 2018 Repurchase Plan,these share repurchase plans, and the planplans may be suspended or discontinued at any time. Since the adoptionAs of the 2018 Repurchase Plan,December 31, 2021, the Company has repurchased 185 thousand shares for an aggregate purchase price of $15.5 million at an average price of $83.97 per share. We had $9.5$59.5 million available for future share repurchases under these share repurchase plans. The Company did not repurchase any shares during the 2018 Repurchase Plan as ofquarter ended December 31, 2020.

In February 2020, the Company’s Board of Directors authorized a new share repurchase plan for the repurchase of up to an additional $50.0 million of the Company’s common shares (the “2020 Repurchase Plan”), to be commenced following the completion of the 2018 Repurchase Plan. While the 2020 Repurchase Plan is intended to generally offset dilution from equity awards to the Company’s employees and directors, the plan does not obligate the Company to acquire any particular amount of our common shares. No time limit was set for the completion of the 2020 Repurchase Plan, and the plan may be suspended or discontinued at any time.

In an effort to preserve cash in light of the economic slowdown caused by the COVID-19 pandemic, we have temporarily suspended repurchases under our share repurchase plans since April 2020.2021.

Performance Graph

The following graph compares the cumulative total return on the Company’s common shares with the cumulative total return on the Nasdaq Composite Index and the Russell 2000 Index for the period from December 31, 20152016 through December 31, 2020.2021. The comparison assumes an investment of $100 was made on December 31, 20152016 in the Company’s common shares and in each of the indices and, in the case of the indices, it also assumes reinvestment of all dividends. The performance shown is not necessarily indicative of future performance.

Item 6. Selected Financial Data[Reserved]

The selected financial data set forth below is not necessarily indicative of results of future operations, and should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7 and the consolidated financial statements and related notes thereto in Item 8 of this Annual Report on Form 10-K to fully understand factors that may affect the comparability of the information presented below. The selected consolidated financial data in this section is not intended to replace the consolidated financial statements.

The consolidated statement of operations data for the years ended December 31, 2020, 2019 and 2018 and the consolidated balance sheet data as of December 31, 2020 and 2019 are derived from our audited consolidated financial statements included in this Annual Report on Form 10-K. The consolidated statement of operations data for the years ended December 31, 2017 and 2016 and the consolidated balance sheet data as of December 31, 2018, 2017 and 2016 are derived from our audited consolidated financial statements that are not included in this Annual Report on Form 10-K.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Management’s Discussion and Analysis of Financial Condition and Results of Operations (“MD&A”) should be read in conjunction with the Consolidated Financial Statements and Notes included in Item 8 of this Annual Report on Form 10-K. The MD&A contains certain forward looking statements within the meaning of the United States Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. In addition to historical financial information, the following discussion and analysis contains forward-looking statements that involve risks, uncertainties and assumptions. These forward-looking statements include, but are not limited to, anticipated impacts of the COVID-19 pandemic on our business, our financial results and our financial condition; our belief that the Purchasing Managers Index (“PMI”) may provide an indication of the impact of general economic conditions on our sales into the advanced industrial end market; our strategy; anticipated financial performance; expected liquidity and capitalization; drivers of revenue growth and our growth expectations in various markets; management’s plans and objectives for future operations, expenditures and product development, and investments in research and development; business prospects; potential of future product releases and expansion of our product and service offerings; anticipated revenue performance; industry trends; market conditions; our competitive positions; changes in economic and political conditions;conditions, including supply chain disruptions and constraints and inflationary pressures; changes in accounting principles; changes in actual or assumed tax liabilities; expectations regarding tax exposures; anticipated reinvestment of future earnings and dividend policy; anticipated expenditures in regard to the Company’s benefit plans; future acquisitions and integration and anticipated benefits from acquisitions and dispositions; anticipated economic benefits and expected costs of restructuring programs; ability to repay our indebtedness; our intentions regarding the use of cash; expectations regarding legal and regulatory requirements, including environmental requirements, and our compliance thereto; and other statements that are not historical facts. Our actual results could differ materially from those anticipated in these forward-looking statements as a result of various important factors, including those set forth in Item 1A of this Annual Report on Form 10-K under the heading “Risk Factors.” The words “anticipates,” “believes,” “expects,” “intends,” “future,” “could,” “estimates,” “plans,” “could,” “would,” “should,” “potential,” “continues,” and similar words or expressions (as well as other words or expressions referencing future events, conditions or circumstances) identify forward looking statements. Readers should not place undue reliance on any such forward looking statements, which speak only as of the date they are made. Management and the Company disclaim any obligation to publicly update or revise any such statements to reflect any change in its expectations or in events, conditions, or circumstances on which any such statements may be based, or that may affect the likelihood that actual results will differ from those contained in the forward looking statements, except as required under applicable law.

Business Overview

Novanta Inc. and its subsidiaries (collectively referred to as, the “Company”, “Novanta”, “we”, “us”, “our”) is a leading global supplier of core technology solutions that give medical and advanced industrial original equipment manufacturers (“OEMs”) a competitive advantage. We combine deep proprietary technology expertise and competencies in photonics, vision and precision motion with a proven ability to solve complex technical challenges. This enables us to engineer core components and sub-systems that deliver extreme precision and performance, tailored to our customers' demanding applications.

End Markets

We primarily operate in two end markets: the medical market and the advanced industrial market.

Medical Market

For the year ended December 31, 2020,2021, the medical market accounted for approximately 56%52% of our revenue. Revenue from our products sold to the medical market is generally affected by hospital and other healthcare provider capital spending, growth rates of surgical procedures, changes in regulatory requirements and laws, aggregation of purchasing by healthcare networks, changes in technology requirements, timing of OEM customers’ product development and new product launches, changes in customer or patient preferences, and general demographic trends. Approximately 70% of our medical end market sales are related to surgical procedures, both elective and emergency based.

Advanced Industrial Market

For the year ended December 31, 2020,2021, the advanced industrial market accounted for approximately 44%48% of our revenue. Revenue from our products sold to the advanced industrial market is affected by a number of factors, including changing technology requirements and preferences of our customers, productivity or quality investments in a manufacturing environment, the financial condition of our customers, changes in regulatory requirements and laws, and general economic conditions. We believe that the Purchasing Managers Index (PMI) on manufacturing activities specific to different regions around the world may provide an indication of the impact of general economic conditions on our sales into the advanced industrial market.

Strategy

Our strategy is to drive sustainable, profitable growth through short-term and long-term initiatives, including:

Significant Events and Updates

Amendment to Third Amended and Restated Credit AgreementAcquisition of ATI Industrial Automation, Inc.

On March 27, 2020,August 30, 2021, we entered intoacquired 100% of the outstanding shares of ATI Industrial Automation, Inc. (“ATI”), an amendment (the “First Amendment”)Apex, North Carolina-based leading supplier of intelligent end-of-arm technology solutions to OEMs for advanced industrial and surgical robots for an upfront cash purchase price of $169.2 million, net of cash acquired and estimated working capital adjustments, and $44.0 million estimated fair value of contingent consideration. The contingent consideration will be payable in 2022 based on a multiple of the third amendedstandalone ATI Adjusted EBITDA, as defined in the purchase and restated creditsale agreement, dated as offor the fiscal year ended December 31, 2019 (as amended, the “Third Amended and Restated Credit Agreement”). Our Third Amended and Restated Credit Agreement provides for an aggregate credit facility of $450.0 million, comprised of a $100.0 million U.S. dollar equivalent euro-denominated (approximately €90.2 million) 5-year term loan facility and a $350.0 million 5-year2021. The initial cash purchase price was financed with borrowings under our revolving credit facility (collectively,and cash available on hand. We expect that the “Senior Credit Facilities”). The First Amendment exercised a portionaddition of ATI will complement and add intelligent technology solutions to further expand our position in mission critical robotic applications within the Precision Motion reportable segment.

Acquisition of Schneider Electric Motion USA, Inc.

On August 31, 2021, we acquired 100% of the $200outstanding shares of Schneider Electric Motion USA, Inc. (“SEM”), a Marlborough, Connecticut-based manufacturer of integrated motion control solutions and electronic controls for automation equipment for a total cash purchase price of $114.7 million, uncommitted accordion featureinclusive of post-closing working capital adjustments and net of cash acquired. The acquisition was financed with borrowings under the Third Amended and Restated Credit Agreement and increased theour revolving credit facility commitment by $145 million, from $350 million to $495 million. Additionally,facility. We expect that the uncommitted accordion feature was reset to $200 millionaddition of SEM will complement and expand our presence in life science applications and solutions for potential future expansion.industrial automation applications within the Precision Motion reportable segment.

Impact of COVID-19 on Our Business

Our Employees

In response to the COVID-19 pandemic, we have taken proactive, aggressive actions to protect the health and safety of our employees. We established steering committees at both the corporate level and at each of our major facilities to provide leadership for and manage our COVID-19 risk mitigation actions and countermeasures. We have provided frequent employee communications that include guidance and updates to our employees with regards to COVID-19 safety procedures and status. We established rigorous safety measures in all of our facilities including implementing social distancing protocols, requiring working from home for those employees that do not need to be physically present onand have adapted our COVID-19 safety measures as the manufacturing floor or in our facilities to perform their work, suspending travel, spreading productionpandemic and related government mandates evolved over more shifts, implementing temperature checks at the entrances to our facilities, frequently disinfecting our workspaces, and providing masks to those employees who must be physically present in our facilities.past two years. We expect to continue some of these measures until we determine that the COVID-19 pandemic is adequately contained for

purposes of our business. In connection with our COVID-19 remediation actions, we have incurred additional costs to protect the health of our employees, including investment in technologies and monitoring equipment. We expect such costs to continue to grow and be significant to our

cost of operations. We may take further actions as government authorities require or recommend or as we determine to be in the best interest of our employees.

We are committed In connection with our COVID-19 remediation actions, we have incurred additional costs to retaining and supporting our employees during this pandemic. To retain our employees, we issued to allprotect the health of our employees, other than the Chief Executive Officer, the Chief Financial Officer, the Chief Human Resource Officerincluding investments in technologies and the Chief Accounting Officer, a special one-time restricted stock unit grant in April 2020 at a total fair valuemonitoring equipment, weekly testing of $14.4 million in the aggregate. The restricted stock units vested in February 2021. These actions were implemented to create an ownership mindset and focus among allunvaccinated employees for the duration of the COVID-19 pandemicat certain locations and through the expected recovery, while maintaining the Company’s talent and capabilities.

Executive Compensation

The Compensation Committeerearranging some of our Board of Directors approvedfacilities to accommodate social distancing and flexible post-pandemic work environment.

Even as governmental restrictions are relaxed and economies gradually, partially or fully, reopen, the 2020 compensation plans for our executive officersongoing economic impacts and a Section 16 officer (collectively, the “Officers”) in February 2020. To supporthealth concerns associated with COVID-19 may continue to affect our business during the COVID-19 pandemic, the Officers agreed to a reduction in cash compensation for 2020. Further, the Officers did not receive the special one-time restricted stock unit grant issued to the rest of the employees. In June 2020, our Board of Directors agreed to forgo the cash retainers payable to our non-employee directors for the third quarter of 2020.foreseeable future.

Our Customers

The outbreak has significantly increased economic and demand uncertainty. The spread of COVID-19 has caused a global economic slowdown and a global recession. In 2020, the decline in customer demand in both medical and advanced industrial end markets resulted in a decrease in sales to many of our customers. In the event of a further prolonged economic recession, overall demand for our products could decline further in the near term and our business would be adversely affected to a greater extent.

Our Facilities

Because of the COVID-19 pandemic, governmental authorities worldwide implemented numerous evolving measures to try to contain the spread of the virus, such as travel bans and restrictions, limits on social gatherings, quarantines, shelter-in-place orders, business shutdowns and social distancing. We have important manufacturing operations in the U.S., the U.K., Germany, and China, all of which have been affected by the COVID-19 pandemic. As ofThrough December 31, 2020, our manufacturing facilities around the world were in operation. While governmental measures may be modified or extended in the event of a resurgence of COVID-19 infections, the spread of new variants of the virus, and delays in effective vaccination of a large proportion of the populations, we have taken measures to protect our employees and expect our manufacturing facilities to remain operational. In connection with the COVID-19 pandemic,2021, we have experienced limited absenteeism from those employees who are required to be on site to perform their jobs.

Our Supply Chain

We have experienced limited disruptiondisruptions to our supply chain as a result of the COVID-19 pandemic to date. Weand global electronics and other raw material shortages. While we regularly monitor the financial health and manufacturing output of companies in our supply chain. Hardship onchain, disruptions to our suppliers and/or sub-suppliers caused by the COVID-19 pandemicthese events could cause further disruption inchallenge our ability to obtain raw materials or components required to manufacture our products, adversely affecting our operations. operations and customer relationships.

To mitigate the risk of any potential supply interruptions from the COVID-19 pandemic and the global electronics and other raw material shortages, we are identifying alternative suppliers and distributors, sourcing raw materials from different supplier and distributor locations, modifying our product designs to allow for alternative components to be used where feasible without compromising quality, performance or other requirements, in-sourcing production of parts where feasible, and taking other actions to ensure oura sustainable supply of raw materials. Although we are mitigating potential supply interruptions from the COVID-19 pandemic,Despite of our mitigation actions, if certain suppliers cannot produce a key part or component for us, or if the receipt of certain materials is otherwise delayed, we may miss our scheduled shipment deadlines and our relationship with customers may be harmed.

Additionally, restrictions on or disruptions of transportation, such as reduced availability of air transports, port closures and backlogs, and increased border controls or closures, have resulted in higher costs and delays, both for obtaining raw materials from suppliers and for shipping finished products to customers.

Our Liquidity

With respect to liquidity, weThe COVID-19 pandemic and the global electronics and other raw material shortages have taken actions to reduce costs and cash expenditures acrosscaused inflationary pressures on the Company. These actions included reducing hiring activities, restricting travel, adjusting employee compensation by eliminating fiscal year 2020 cash bonuses and base salary increases, implementing an unpaid time-off programmarket prices for substantially allcertain of our non-production workforce, limiting discretionary spending, reducing or deferring spendingparts and primary raw materials as well as increases in the costs of labor, freight, packaging, energy and other consumables that are used in our manufacturing processes. We have generally been able to offset increases in these costs through various productivity and cost reduction initiatives, as well as adjusting our selling prices to pass through some of these higher costs to our customers; however, our ability to raise our selling prices depends on capital investment projects, deferring lease payments on certain facilities,market conditions and deferring certain U.S. payroll tax payments in accordance with relief provisions undercompetitive dynamics. Given the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”). Astiming of December 31, 2020, we deferred $2.8 million in certain U.S. payroll tax payments under the CARES Act. Dueour actions compared to the uncertainty relatedtiming of these inflationary pressures, there may be periods during which we are unable to fully recover the future impact of the COVID-19 pandemic, we temporarily suspended repurchases underincreases in our share repurchase plans in April 2020.costs.

As of December 31, 2020, we had cash and cash equivalents of $125.1 million and available borrowing capacity under our revolving credit facility of $395.2 million. We have reviewed numerous potential scenarios in connection with the impact of COVID-19 on our business. Based on our analysis, we believe our existing balances of cash and cash equivalents, anticipated cash flows from our operating activities, and available borrowing capacity under our revolving credit facility will be sufficient to meet our cash needs arising in the ordinary course of business for the next twelve months. Additionally, we believe we will remain in compliance with our debt covenants for the next twelve months.

Overview of Financial Results

Total revenue for 20202021 was $590.6$706.8 million, a decreasean increase of $35.5$116.2 million, or 5.7%19.7%, versus 2019.2020. This decreaseincrease was primarily due to the COVID-19 pandemic as we experienced decreasedincreased demand in the advanced industrial market related to reductionsmicroelectronics and increases in industrial manufacturing spending and in the medical market as a result of deferrals of elective surgical procedures.compared to 2020, which was impacted by COVID-19, as well as revenue from current year acquisitions. The effect of our current year acquisitions in 2019 resulted in an increase in revenue of $8.4$43.2 million, or 1.3%7.3%. In addition, foreign exchange rates positively impacted our revenue by $3.7$12.5 million, or 0.6%2.1%, in 2020.2021.

Operating income increased $0.6for 2021 was $64.1 million, from $55.3an increase of $8.2 million, in 2019 to $55.9 million inor 14.6%, versus 2020. This increase was primarily attributable to a decrease of selling, general and administrative (“SG&A”) expenses of $8.6 million and a decrease in restructuring and acquisition related costs of $12.8 million, offset by a decreasean increase in gross profit of $17.6$55.8 million as a result of lowermostly attributable to higher revenue, andpartially offset by an increase in research and development and engineering (“R&D”) spendingexpenses of $5.0$11.5 million, selling, general and administrative (“SG&A”) expenses of $19.3 million and restructuring, acquisition, and related charges of $14.2 million.

Basic earnings per common share (“basic EPS”) of $1.27$1.42 in 20202021 increased $0.11$0.15 from the basic EPS of $1.16$1.27 in 2019.2020. Diluted earnings per common share (“diluted EPS”) of $1.25$1.41 in 20202021 increased $0.10$0.16 from the diluted EPS of $1.15$1.25 in 2019.2020. The increase of basic EPS and diluted EPS was primarily attributable to decreasesan increase in interest expense andoperating income offset by the increase of income tax provision.

Specific components of our operating results for 2020, 20192021 and 20182020 are further discussed below.

Results of Operations

Information pertaining to fiscal year 2019 results of operations, including a year-over-year comparison with fiscal year 2020, was included in our Annual Report on Form 10-K for the year ended December 31, 2020 under Part II, Item 7, “Management’s Discussion and Analysis of Financial Position and Results of Operations,” which was filed with the SEC on March 1, 2021.

The following table sets forth our results of operations as a percentage of revenue for the years indicated:

Revenue

The following table sets forth external revenue by reportable segment for 2020, 20192021 and 20182020 (dollars in thousands):

Photonics

Photonics segment revenue in 2020 decreased2021 increased by $30.8$32.8 million, or 13.4%16.5%, versus 2019,2020, primarily due to decreasedincreased demand in the advanced industrial market related to reductions in global industrial manufacturing spending and in the medical market as a result of deferrals of elective surgical procedures and a reductionincreases in certain medical diagnostic testing during the COVID-19 pandemic.

Photonics segment revenue in 2019 decreased by $18.9 million, or 7.6%, versus 2018, primarily due to decreased demand in the advanced industrial market related to reductions in global industrial manufacturing spending and a decrease in revenue from our optical light engine products, partially offsetas compared to 2020, which was impacted by $4.9 million of revenue from the acquisition of ARGES in July 2019.COVID-19 pandemic.

Vision

Vision segment revenue in 2020 decreased2021 increased by $9.8$0.4 million, or 3.6%0.2%, versus 2019,2020, primarily flat due to a decrease in revenueconsistent customer demand dynamics from our minimally invasive surgery (“MIS”) products as a result of deferrals of elective surgical procedures during the COVID-19 pandemic.

Vision segment revenue in 2019 increased by $38.5 million, or 16.5%, versus 2018. The increase was primarily due to an increase in revenue of $28.4 million from our minimally invasive surgery products as a result of new product introductions and increased demand in the medical market and $5.4 million of revenue from the acquisition of Med X Change in June 2019.

Precision Motion

Precision Motion segment revenue in 20202021 increased by $5.1$82.9 million, or 4.1%64.1%, versus 2019,2020, primarily due to an increase in revenue related to increased demand by microelectronics customers, partially offset by decreased demand in the medical market as a result of deferrals of elective surgical procedures during the COVID-19 pandemic.

Precision Motion segment revenue in 2019 decreased by $7.9 million, or 6.0%, versus 2018. The decrease was primarily due to decreased demand in the microelectronics andadvanced industrial market related to reductions in global industrial manufacturing spending, partially offset by increased demand inand certain medical robotic applications as well as an aggregate of $43.2 million revenue contributions from the medical marketATI and the acquisitions of Ingenia in April 2019 and Zettlex Holdings Limited (“Zettlex”) in May 2018.SEM acquisitions.

Gross Profit

The following table sets forth the gross profit and gross profit margin for each of our reportable segments for 2020, 20192021 and 20182020 (dollars in thousands):