UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

FORM 10-K

FORM 10-K/A
Amendment No. 1
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 29, 201825, 2021

OR

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                 to                

Commission file number 0-19882

KOPIN CORPORATION

(Exact Name of Registrant as Specified in its Charter)

Delaware04-2833935
Delaware04-2833935

State or other jurisdiction of

incorporation or organization

(I.R.S. Employer

Identification No.)

125 North Drive, WestboroughMAWestboroughMA01581-3335
(Address of principal executive offices)(Zip Code)

Registrant’s telephone number, including area code: ((508)508870-5959

Securities registered pursuant to Section 12(b) of the Act:

Title of each classTrading Symbol(s)Name of each exchange on which registered
Common Stock, par value $0.01KOPNNasdaq Global Capital Market

Securities registered pursuant to Section 12(b) of the Act:

None.

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes No

 No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes No

 No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes No ☐

 No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☐ No

 Yes

No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.
Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and emerging growth company in Rule 12b-2 of the Exchange Act. (Check one):

Large Accelerated FilerAccelerated Filer
Non-Accelerated FilerSmaller Reporting Company
Emerging Growth Company

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. Yes ☐ No ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.

Yes No

 No

Indicate by check mark whether the registrant is a shell company (as defined in rule 12b-2 of the Exchange Act). Yes No

 No

As of June 30, 201825, 2021 (the last business day of the registrant'sregistrant’s most recent second fiscal quarter), the aggregate market value of outstanding shares of voting stock held by non-affiliates of the registrant was $164,583,000.
$662,096,744.

As of March 8, 2019, 76,282,062 11, 2022, 92,240,541shares of the registrant’s Common Stock, par value $.01 per share, were issued and outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive proxy statement relating to the registrant’s annual meeting of stockholders are incorporated by reference in response to Items 10, 11, 12, 13 and 14 of Part III of this Form 10-K.

 


INDEX

PART I
Item 1.Business4
Item 1A.Risk Factors16
Item 1B.Unresolved Staff Comments28
Item 2.Properties28
Item 3.Legal Proceedings28
Item 4.Mine Safety Disclosures28
PART II
Item 5.Market for Registrant’s Common Equity, Related stockholder Matters and Issuer Purchases of Equity Securities29
Item 6.Reserved31
Item 7.Management’s Discussion and Analysis31
Item 7A.Quantitative and Qualitative Disclosures About Market Risk42
Item 8.Financial Statements and Supplementary Data42
Item 9.Changes in and Disagreements with Accountants on Accounting and Financial Disclosure42
Item 9A.Controls and Procedures42
Item 9B.Other Information43
Item 9C.Disclosure Regarding Foreign Jurisdictions that Prevent Inspections43
PART III
Item 10.Directors, Executive Officers and Corporate Governance43
Item 11.Executive Compensation43
Item 12.Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters43
Item 13.Certain Relationships and Related Transactions, and Director Independence43
Item 14.Principal Accountant Fees and Services43
Part IV
Item 15.Exhibits and Financial Statement Schedules44
Item 16.Form 10-K Summary73
SIGNATURES74

2



EXPLANATORY NOTE

Kopin Corporation (the "Company" or "Kopin") is filing this Amendment No. 1 on Form 10-K/A (this "Form 10-K/A") to its

Part I

Forward Looking Statements

This Annual Report on Form 10-K for the fiscal year ended December 29, 2018, originally filed with the U.S. Securities and Exchange Commission (the "SEC") on March 14, 2019 (the "Original Form 10-K") to update the Report of Independent Registered Public Accounting Firm to indicate that the consolidated balance sheet as of December 30, 2017 was audited. The Report of Independent Registered Public Accounting Firm within the Original Form 10-K omitted that the consolidated balance sheet as of December 30, 2017 was audited.

In addition, the Company is correcting immaterial misstatements it has identified in its previously-issued consolidated financial statements and related financial information for the fiscal years ended December 29, 2018, December 30, 2017 and December 31, 2016. The following sections of this Form 10-K/A contain information that has been revised to reflect the corrections:
Part I, Item 1A. Risk Factors
Part II, Item 6. Selected Financial Data
Part II, Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations
Part II, Item 8. Financial Statements and Supplementary Data
Part II, Item 9A. Controls and Procedures
Part IV, Item 15. Exhibits and Financial Statement Schedules
Lastly, due to a material weakness in our internal control over financial reporting identified as a result of the misstatements discussed above, the Company is amending Part II, Item 9A "Controls and Procedures" with respect to (a) the Company's conclusions regarding the effectiveness of (i) the Company's disclosure controls and procedures and (ii) our internal control over financial reporting, and (b) Deloitte & Touche LLP’s related attestation report on our internal control over financial reporting.
Except as described in this Explanatory Note, the information contained in the Original Form 10-K has not been revised to reflect any subsequent events.
Background
In 2018, the Company liquidated its Korean subsidiary, Kowon. At the time of liquidation the Company owned approximately 93% of the equity of Kowon. The liquidation event was triggered in 2018 by the Company’s decision to not reinvest the net assets generated from Kowon in Korea. Although the Company paid the proper amounts to the noncontrolling interest holder in 2017 and 2018 based on its ownership percentage, the Company has determined that the consolidated financial statements were incorrect because of two prior period errors impacting the amounts previously reported as noncontrolling interest as well as two errors made when recording the effects of the 2018 liquidation.
Effects of the Immaterial Misstatements
A summary of these errors and their impact on the consolidated financial statements are as follows:
1.
The Company improperly calculated the noncontrolling interest amount of Kowon when the Company made equity investments in years prior to 2015. The Company has corrected for this misstatement in the accompanying Consolidated Statements of Stockholders’ Equity, which resulted in a decrease to additional paid-in capital and an increase to noncontrolling interest of $1.2 million as of December 26, 2015. This correction impacted the respective equity categories in the accompanying Consolidated Statements of Stockholders’ Equity and Consolidated Balance Sheets for 2016, 2017 and 2018.
2.
In 2016, upon recognition of a gain on sale of Kowon assets, the Company did not properly allocate the portion of the gain attributable to the noncontrolling interest in the amount of $0.1 million. The Company has corrected for this misstatement in the accompanying 2016 Consolidated Statement of Operations, which consequently impacts the accompanying Consolidated Statements of Stockholders’ Equity by increasing accumulated deficit and increasing noncontrolling interest for $0.1 million as of December 31, 2016.
3.
In 2018, when the Company liquidated Kowon, it was carrying approximately $1.7 million in cumulative translation adjustments ("CTA") related to Kowon's net assets. Approximately $0.4 million of CTA was correctly reclassified into earnings in 2018, however, the remaining $1.3 million was incorrectly reclassified directly to noncontrolling interest to offset cumulative understatement in noncontrolling interest that resulted from the two prior period errors noted above. This caused the net loss in the accompanying 2018 Consolidated Statement of Operations to be overstated by $1.3 million, which the Company has corrected in the accompanying Consolidated Statements of Operations.

1





4.
In addition, in connection with the liquidation of Kowon, the Company understated its distribution to the noncontrolling interest holder in the accompanying 2018 Consolidated Statement of Cash Flows by less than $0.1 million, which the Company has corrected in the accompanying Consolidated Statements of Cash Flows.
Internal Control Considerations
On October 17, 2019, the Audit Committee of our Board of Directors (the “Audit Committee”) determined that it would be necessary for the Company to correct certain immaterial misstatements identified in its previously-issued consolidated financial statements. The Audit Committee made this determination following consultation with and upon the recommendation of management. Refer to "Part II. Item 7 - Management’s Discussion and Analysis of Financial Condition and Results of Operations" and Note 18. Correction of Previously Issued Financial Statements included in "Part IV. Item 15 - Exhibits and Financial Statement Schedules" for a more detailed description of the misstatements.
Notwithstanding the existence of the material weakness described in “Part II. Item 9A - Controls and Procedures,” we believe that the consolidated financial statements in this Form 10-K/A fairly present, in all material respects, our financial position, results of operations and cash flows as of the dates, and for the periods, presented, in conformity with generally accepted accounting principles (“GAAP”).


2






Part I
Forward Looking Statements

This Annual Report on Form 10-K/A contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), which are subject to the safe harbor created by such sections. Words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “could,” “would,” “seeks,” “estimates,” and variations of such words and similar expressions, and the negatives thereof, are intended to identify such forward-looking statements. We caution readers not to place undue reliance on any such “forward-looking statements,” which speak only as of the date made, and advise readers that these forward-looking statements are not guarantees of future performance and involve certain risks, uncertainties, estimates, and assumptions by us that are difficult to predict. Various factors, some of which are beyond our control, could cause actual results to differ materially from those expressed in, or implied by, such forward-looking statements. All such forward-looking statements, whether written or oral, and whether made by us or on our behalf, are expressly qualified by these cautionary statements and any other cautionary statements which may accompany the forward-looking statements. In addition, we disclaim any obligation to update any forward-looking statements to reflect events or circumstances after the date of this report, except as may otherwise be required by the federal securities laws.

We have identified the following important factors that could cause actual results to differ materially from those discussed in our forward-looking statements. Such factors may be in addition to the risks described in Part I, Item 1A. “Risk Factors;” Part II, Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations;” and other parts of this Form 10-K/A.10-K. These factors include: our ability to continue as a going concern; the material weakness management has identified in our internal control over financial reporting, its conclusion that our disclosure controls and procedures were not effective asextent of the fiscal year ended December 29, 2018,impact of the coronavirus (“COVID-19”) pandemic on our business and operations, and the economic and societal disruptions resulting from the COVID-19 pandemic; our ability to remediatebelief that material weakness; our ability to obtain raw materials and other goods as well as services from our suppliers as needed; our intent to continue focusing ourthe process development efforts on proprietary wearable computing systems; the potential for customers to choose our competitors as their supplier; products used in thermal weapon sight systems is complete and our expectation that we will have negative cash flow from operating activitiesincrease production rates of our products used in 2019;thermal weapon sight systems; our ability to prosecute and defend our proprietary technology aggressively or successfully; our ability to retain personnel with experience and expertise relevant to our business; our ability to invest in research and development to achieve profitability even during periods when we are not profitable; any disruptions or delays in our supply chains, particularly with respect to semiconductor components, whether resulting from the COVID-19 pandemic or regional or global geopolitical developments or otherwise; our ability to continue to introduce new products in our target markets;the degree to which our wearable technology is embraced by consumers and commercial users; our ability to develop and expand our wearable technologies and to market and license our concept systems and components; our ability to generate revenue growth and positive cash flow, and reach profitability; the strengthening of the U.S. dollar and its effects on the price of our products in foreign markets; the impact of new regulations and customer demands relating to conflict minerals; our ability to obtain a competitive advantage in the wearable technologies market through our extensive portfolio of patents, trade secrets and non-patented know-how; our ability to grow within our targeted markets; smartphone makers’ intent to create products that work as a complement to smartphones or that will eventually replace smartphones with more convenient configurations; the importance of small form factor displays in the development of military,defense, consumer, and industrial products such as thermal weapon sights, safety equipment, virtual and augmented reality gaming, training and simulation products and metrology tools; our ability to successfully offer and market our SOLOS smart glasses directly via the Internet; our ability to offer Golden-i Infinity through value added resellers; the suitability of our properties for our needs for the foreseeable future; our expectation not to pay cash dividends for the foreseeable future and to retain earnings for the development of our businesses; our need to achieve and maintain positive cash flow and profitability, and our expectation that we will expend between $1.5 million and $2.0 million on capital expenditures over the next twelve months; if we do not soon achieve and maintain positive cash flow and profitability our financial condition will ultimately be materially adversely affected,affected.

3

Item 1.Business

Overview

We were incorporated in Delaware in 1984 and are a leading developer and provider of high-resolution microdisplays, microdisplay subassemblies and related components for defense, enterprise, industrial, and consumer products. Our products are used for soldier, avionic, armored vehicle and training & simulation defense applications; industrial, public safety and medical headsets; 3D optical inspection systems; and consumer augmented reality (“AR”) and virtual reality (“VR”) wearable headsets systems.

Our primary current sources of product revenues are from the sale of display components and subassemblies for defense and industrial applications and development contracts primarily for U.S. defense programs. We believe we also are well-positioned with our technology and intellectual property, manufacturing capabilities and partnerships and reputation to take advantage of the emerging market for AR and VR applications and products from which microdisplays are the cornerstone technology. At the center of all of our products is a display. We are the only company, to our knowledge, that offers transmissive active-matrix liquid crystal displays (“AMLCDs”), reflective liquid crystal on silicon (“LCOS”) displays and organic light emitting diode (“OLED”) displays, and related optics, which enable us to serve the markets and customers based on their need and the problems they are trying to solve. We believe our display technologies combined with our extensive expertise in optics, system electronics and human factors, is the reason why many customers come to us.

The components we offer for sale consist of our proprietary miniature AMLCD, LCOS displays, OLED displays, application specific integrated circuits (“ASICs”), backlights, and optical lenses. We refer to our AMLCD as “CyberDisplay®,” our LCOS displays/Spatial Light Modulators (“SLMs”) as “Time Domain ImagingTM technology”, and our OLED as “Lightning® displays”. Our transmissive AMLCDs are designed in Westborough, Massachusetts, have initial manufacturing steps performed in Taiwan and then are completed in our facility in Westborough, Massachusetts.

Our AMLCD components are sold separately or in subassemblies. For example, we offer a display as a single product, a display module which includes a display, an optical lens and backlight contained in either plastic or metal housings, a binocular display module which has two displays, lenses and backlights, and a higher-level assembly which has additional components for defense applications. Examples of products manufactured by our customers that include our AMLCD components include:

Weapon sights and target locators for soldiers to enable faster and more accurate target acquisition;
Fighter pilot helmets that use our display to overlay information (targeting, plane operation, etc.) over the real world scene;
Industrial headsets for applications such as field maintenance/service where a service worker can visually access diagrams and drawings in realtime while keeping both hands free to conduct work or access a remote expert with live video to help solve a problem remotely – thereby increasing productivity and effectiveness;
Public safety devices such as firefighter masks that include our displays so that a firefighter may use the thermal imager to navigate a smoke-filled building; and
AR and VR consumer products for recreational use including rifle sights.

Our LCOS products are designed and manufactured at our Forth Dimension Display (“FDD”) subsidiary in Dalgety Bay, Scotland. Our LCOS displays are often configured with drive electronics and sold as a package that makes it easier for our customers to design our displays into their end products. A significant portion of the LCOS displays are sold to customers for incorporation into SLMs, which are built into manufacturing equipment that are used for sophisticated 3D optical inspection.

Our OLED displays are designed in our Santa Clara, California facility and manufactured in Asia. Our displays provide either color or monochrome images and are offered in a variety of sizes and resolutions. The AMLCD display driver ASICs we offer are designed in our Santa Clara, California facility and are the electronic interfaces between our displays and the products into which the displays are incorporated. The optical lenses and backlights we offer are based on either our proprietary designs or design’s we license from third parties. The ASICs, optical lenses, and backlights are manufactured by third parties based on our purchase orders.

Our NVIS, Inc. (“NVIS”) subsidiary is a designer and manufacturer of defense and industrial head-mounted and hand-held VR products and training simulation defense equipment and is located in Reston, Virginia. Depending on the size of the order, NVIS’s products are either manufactured in its Reston, Virginia facility or by a contract manufacturer in the U.S.A. NVIS products allow customers to visualize and interact with simulated 3D environments and equipment for training purposes. Our customers develop high-fidelity training and simulation applications that require high-performance visuals, intuitive controls, and unsurpassed customer support. Some of NVIS’s products include our LCOS displays.

4

The focus of our internally funded research and development activities is on our OLED display technology. Previously we designed headset systems that were focused on the emerging enterprise and consumer markets for head-worn, hands-free voice and gesture controlled wireless computing and communication devices. However, we continue to license our previously designed systems under agreements that may include a royalty payable to us and a purchase and supply agreement that requires us to supply our customers and our customers to buy our components for integration into their products. The licenses may convey the right of exclusivity for a particular market or geographic area.

In addition to sales of our components and subassemblies, we also derive a significant portion of our revenue from developing custom product solutions for our customers which we refer to as Funded Research and Development. We enter into development agreements with the goal of successfully developing a customer product and then winning the production orders for such products once design is complete and tested. These development programs can take several years. The Funded Research and Development process typically adds to Kopin’s knowledge base and expertise, putting us in a better position for future business. The Funded Research and Development arrangements typically have various milestones we are required to achieve in order to be reimbursed for our efforts. These arrangements are normally fixed price and may be cancelled by the customer on short notice. We also believe that the technologies developed for the U.S. defense industry can eventually be used in commercial and enterprise applications and then in consumer applications.

Sales to significant non-affiliated customers for fiscal years 2021, 2020 and 2019, as a percentage of total revenues, was as follows:

  Sales as a Percent of Total Revenue 
  Fiscal Year 
  2021  2020  2019 
Customer            
Defense Customers in Total  40%  50%  30%
DRS Network & Imaging Systems, LLC  31%  35%  17%
Collins Aerospace  30%  27%  * 
RealWear, Inc.  *   *   20%
Funded Research and Development Contracts  32%  25%  17%

Note: The symbol “*” indicates that sales to that customer were less than 10% of the Company’s total revenues. The caption “Defense Customers in Total” excludes funded research and development contracts.

Our fiscal year ends on the last Saturday in December. The fiscal years ended December 25, 2021, December 26, 2020, and December 28, 2019 are referred to herein as fiscal years 2021, 2020 and 2019, respectively.

Augmented and Virtual Reality

The introduction and wide acceptance of the smartphone has generated advances in many technologies including smaller and cheaper electronic components, voice search engines and wireless 4G and 5G networks. Smartphone adoption has also been the catalyst for the development of software for a wide-range of applications. Leveraging off of these new technologies and the growth of cloud computing, a new category of emerging AR and VR markets are starting to develop. These AR technologies are being used by the military to provide personnel with enhanced situational awareness by overlaying digital imaging over the real-world scene. These technologies can also be used for hundreds of different applications by enterprise workers, public safety officials and consumers, bringing ever-increasing productivity, fun and convenience.

5

We believe that defense, industrial and consumer companies are looking at AR and VR as new applications and computing platforms. In addition, wireless network companies are encouraging the development of more products and applications that utilize their network capacity and other companies are developing products that provide continuous access to digital content. In order for these markets to develop and grow, advances and investment in display technology, optics, application software, and wireless communications systems with greater bandwidth such as 5G networks will be necessary. These advances in display technologies must increase performance but at the same time the cost of displays must decrease.

Our Solution

Kopin Technology

Kopin technology includes the ability to manufacture proprietary small form factor AMLCD, LCOS and OLED displays and optical lenses and the know-how to design and manufacture components and subassemblies based on our display technologies. We also offer proprietary backlights and ASICs that work with our AMLCD displays. Our components are used in our customers’ products, such as headsets for field service personnel, medical professionals or consumer rifle scopes. We also offer backlights and ASICs that work with our AMLCD displays. The subassemblies we offer combine one or two of our displays, backlight, ASIC, complex optics, and other electronics in an assembly that is then included in a larger system, for example a weapon sight or a targeting system in an armored vehicle. These subassemblies must survive the shock and vibration of weapons fire and operate in extreme environmental conditions. There is considerable know-how that goes into the design, materials selection, assembly and test of these subassemblies that is an important part of our technology.

Display Products

Small form factor displays used in near-eye applications are widely used in defense in many applications such as thermal weapon sights, avionic helmets and training and simulation systems. Small form factor near-eye displays currently have more limited use in industrial products such as wearable headsets that allow users to view data, schematics and videos to enable them to perform production or repairs. In addition, we believe small form factor near-eye display are well suited for AR and VR consumer markets and will be a critical component in the development of these markets, which we believe will grow in the coming years. We believe our small form factor displays have certain advantages with respect to small size, resolution, brightness and low power consumption that are advantageous for product design and usage.

There are several micro display technologies commercially available including transmissive, reflective and emissive. Our principal display products are miniature high-density color or monochrome AMLCDs that range from approximately 428 x 240 resolution to 2048 x 2048 resolution and are sold in either a transmissive or reflective format. We are developing emissive OLED displays with a resolution of 1280 x 720 (“720p”), 2048 x 2048 (“2K”), 1280 x 960 (“QVGA”) and 2560 x 2560 (“2.6K”). We sell our displays individually or in combination with our other components assembled in a unit. For example, we offer a display as a product, a module product unit that includes a single display, backlight and optics in a plastic housing, a binocular display module product that includes two displays, backlights and optics in a plastic housing, and a subassembly that we refer to as an HLA (“Higher-Level Assembly”) that contains a display, light emitting diode based illumination, optics, and electronics in a sealed housing, primarily for defense applications.

Our transmissive AMLCD display products, which we refer to as CyberDisplay® products, utilize high quality, single-crystal-on-silicon, which is the same high-quality silicon used in conventional integrated circuits. This single-crystal-silicon is not grown on glass; rather, it is first formed on a silicon wafer and patterned into an integrated circuit (including the active matrix, driver circuitry and other logic circuits) at an integrated circuit foundry. These processes enable the manufacture of miniature active matrix circuits, that are comparable to higher resolution displays relative to passive and other active matrix displays that are fabricated on glass. Our foundry partners fabricate integrated circuits using our proprietary back plane designs for our CyberDisplay displays in their foundries in Taiwan. The fabricated wafers are then returned to our facilities, where we lift the integrated circuits off the silicon wafers and transfer them to glass using our proprietary Wafer Engineering technology. The transferred integrated circuits are then processed, packaged with liquid crystal and assembled into display panels at our Display Manufacturing Center in Westborough, Massachusetts. When combined with the appropriate optic the display provides the user with a high resolution, full screen experience.

6

Our proprietary technology enables the production of transparent circuits on a transparent substrate, in contrast to conventional silicon circuits, which are on an opaque substrate. Our CyberDisplay products’ imaging properties are a result of the inclusion of a liquid crystal layer between the active matrix integrated circuit glass and the transparent cover glass. We believe our manufacturing process offers several advantages over conventional active matrix LCD manufacturing approaches, including:

Greater miniaturization;
Higher pixel density;
Lower power consumption; and
Higher brightness.

The color CyberDisplay products generate colors by using color filters with a white backlight. Color filter technology is a process in which display pixels are patterned with materials, which selectively absorb or transmit the red, green or blue colors of light.

Our reflective LCOS display products are miniature high density, dual mode color sequential/monochrome reflective microdisplays with resolutions that range from approximately 1280 x 768 pixels (“WXGA”) resolution to 2K x 2K resolution. These displays are manufactured by our FDD subsidiary in Scotland. Our reflective displays are based on a proprietary, high-speed, ferroelectric liquid crystal on silicon (“FLCOS”) platform. Our digital software and logic-based drive electronics combined with the very fast switching binary liquid crystal enables our microdisplay to process images purely digitally and create red, green and blue gray scale in the time domain. This architecture has major advantages in visual performance over other liquid crystal, organic light-emitting diode and microelectromechanical systems-based technologies: precisely controlled full color or monochrome gray scale is achieved on a matrix of undivided high fill factor pixels, motion artifacts are reduced to an insignificant level and there are no sub-pixels, no moving mirrors and no analog conversions to detract from the quality of the image.

The FLCOS device is comprised of two substrates. The first is a pixelated silicon-based CMOS substrate which is manufactured by our foundry partner based on our proprietary back plane design using conventional silicon integrated circuit lithography processes. The silicon substrate forms the display’s backplane, serving as both the active matrix to drive individual pixels and as a reflective mirror. The second substrate is a front glass plate. Between the backplane and the front glass substrate is a ferroelectric liquid crystal material which, when switched, enables the incoming illumination to be modulated.

Our OLED technology has the ability to emit light when electrical current flows through its electroluminescent layers as opposed to our AMLCD which requires a separate light source. Our OLED microdisplays have a top-emitting structure built on opaque silicon integrated circuits rather than on glass. An OLED display typically has a wider viewing angle than an AMLCD. Light from an OLED appears fairly evenly distributed in the forward directions and so a slight movement of the eye relative to the display does not perceive the change in the image brightness or color. OLED displays can also have a much higher contrast ratio than AMLCDs, which is desirable for some user applications.

Kopin is aiming at disrupting the OLED microdisplay industry with a new fabless, scalable business model. We believe the partitioning of the OLED manufacturing into multiple parties, each focusing on their core competencies, can make a significant difference in the OLED microdisplay performance and supply chain, while reducing the capital cost and overhead costs of entering this business. Making OLED microdisplays consists of three major steps: designing backplane circuits, processing silicon wafers to generate backplane wafers, and deposition of OLED layers on silicon backplane wafers and packaging the displays. We believe backplane design is the most intellectual property-intensive area. Kopin has more than 20 patents granted or pending on the design of OLED backplanes to get low power consumption, high frame rates and more uniform display images. Kopin has established relationships with multiple silicon foundries to produce the OLED backplane wafers. We believe Kopin’s Lightning® backplane technology and the emergence of high-volume OLED manufacturing facilities can reduce the cost to manufacture OLED displays thereby expanding the applications for OLED microdisplays.

Our proprietary technology in OLED microdisplays lies mainly in the design of the integrated circuits or “back plane” upon which OLED microdisplays are built. The back plane drives the performance of the display.

7

Two of the biggest challenges for the OLED microdisplay for AR and VR applications is low brightness and short lifetime. Kopin is working to solve both of these issues with a double OLED stack approach. We believe most OLED microdisplays commercially available in volume to-date have been made with a single-stack OLED structure, namely consisting of a one junction organic diode structure. A duo-stack OLED consists of two OLED structures connected in series so that carriers (electrons-holes) pass through the duo-stack OLED and generate photons twice, instead of once in the case of a single-stack OLED structure. This structure enables higher brightness without a commensurate increase in power and without the longevity (burn-in) issues which have plagued previous high-brightness single-stack OLED displays. In addition, we believe Kopin’s proprietary ColorMax ™ technology provides an accurate and wide color spectrum without the color mixing that has previously prevented duo-stack OLED structures from rendering accurate color. In addition, we have a proprietary embedded anode structure within the back plane design which we believe will make the design integration of our display in a finished product less complicated for product designers. We call this technology Display on a Chip (DoC). We believe our patent-pending backplane technologies can provide superior performance compared to other OLED products in the market in terms of brightness, power consumption, longevity and color accuracy and we believe these features will improve further as our technology matures.

We have engaged foundry services for the fabrication of the Lightning OLED back plane wafers. Our model is to sell these wafers to deposition foundries that deposit the organic material on the backplane and manufacture the displays. The deposition foundries will either sell the displays to their customers or to us for resale to our customers. We believe this outsourcing model allows us to leverage our underlying back plane intellectual property as well as the existing infrastructure to obtain lower cost manufacturing and avail ourselves of manufacturing technology improvements as they occur.

Currently we have two OLED microdisplays on the market: a 2K x 2K display with 2048 x 2048 resolution in a 0.99” diagonal size, which is aimed at VR and Mixed Reality applications; and a 720p display with 1280 x 720 resolution in a 0.49” diagonal size, which is aimed at AR applications. We have also demonstrated a QVGA display with 1280 x 960 resolution in a 0.5” diagonal size, which is aimed at electronic viewfinder and AR applications, and a 2.6K x 2.6K display with 2560 x 2560 resolution in a 1.3” diagonal size. Our OLED microdisplay has a combo C-PHY/D-PHY Mobile Industry Processor Interface and display stream compression to allow 120 Hz operation at the full resolution. This display is designed for high-end VR and content streaming applications.

Kopin is also exploring the development of MicroLED microdisplays which offer the possibility of high brightness, wide viewing angle, excellent contrast and low cost. Kopin is working with other partners to explore the potential benefits and implementation of the technology. If Kopin is successful in developing prototypes, then we expect that high volume manufacturing process development may be required including the development of equipment.

By offering transmissive, reflective and emissive microdisplay technologies today and working with potential customers for MicroLEDs in the future, we believe we can uniquely support whichever technology is best suited for a given application. Transmissive and reflective AMLCDs are typically used in bright light conditions as their brightness can be modulated over a wide range by controlling the backlight operation. OLED displays currently have less brightness range but offer superior contrast and response time characteristics and therefore are better suited in an immersive products environment that blocks out ambient light.

Optical Lenses and Backlights

We offer a variety of optical lenses some of which we have developed internally and others for which we license the rights to sell. We also offer a variety of backlights, some of which we have developed internally and some of which are “off-the-shelf” components. The lenses come in a variety of sizes with the smallest being our Pupil™, followed by our Pearl™ and Pancake™ lenses. The different sizes of lenses give us and our customers design flexibility when creating headset systems. There is a trade-off between the lens size and the size of the perceived image to the viewer. For example, a Pearl lens will provide the viewer with an image approximately equivalent to what the viewer would see looking directly at a smartphone, whereas a Pancake lens will provide the viewer with an immersive experience. We use third parties to manufacture these lenses.

8

Headset Systems

We license an industrial headset reference design, which is a complete head-worn computer that connects to the Internet wirelessly and includes an optical pod with one of our display products, a microprocessor, battery, camera, memory and various commercially available software packages that we license. We also licensed an industrial headset reference design, which is a device that attaches to a pair of safety glasses, includes an optical pod with one of our display products and a camera and is operated primarily through the use of voice. The display module or optical pod allows users to view the information such as maintenance diagrams and instruction sets, Internet data, emails, text messages, maps or other data at a “normal” size because of our specialized optics. Our industrial headsets provide the capability of viewing technical diagrams, by enabling the user to zoom in to see finer details or zoom out to see a larger perspective.

Strategy

Our product strategy is to enter into Funded Research and Development programs with U.S. defense prime contractors to invent, develop, manufacture and sell (or license) leading-edge critical technology and microdisplay components and subassemblies that will be used in rugged environments. We intend to use the know-how gained and technology developed from these defense development programs and products to create products that can be used in industrial, enterprise, medical and ultimately consumer applications. The products we develop typically include a microdisplay, optics, and an ASIC in a sealed housing. The products we make for the defense market must be able to withstand the extreme shock and vibration experienced in weapons fire. Accordingly, our intellectual property includes not just our patented microdisplays and a broad range of optics and but also our know-how to manufacture products that can withstand shock and vibration of weapons fire and extreme environments. The critical elements of our strategy include:

Broad Portfolio of Intellectual Property. We believe that our extensive portfolio of patents, trade secrets and non-patented know-how provides us with a competitive advantage in our markets and we have been accumulating a significant patent and know-how portfolio either by internal efforts or through acquisition. We own, exclusively license or have the exclusive right to sublicense approximately 200 patents and patent applications issued and/or pending worldwide. An important piece of our strategy is to continue to accumulate valuable patented and non-patented technical know-how relating to our microdisplays, including back plane design, and other critical technologies for advanced wearable systems such as optics and drive electronics.
Maintain Our Technological Leadership in Defense and Industrial Markets. We are a recognized leader in the design, development and manufacture of high resolution microdisplay components and subassemblies for defense and industrial applications. We believe our ability to continue to develop components and subassemblies for defense applications enhances our opportunity to grow within our other non-defense targeted markets such as industrial, medical and eventually AR and VR consumer markets. We perform research and development contracts for U.S. Government agencies and prime contractors of the U.S. government. Under these contracts, the U.S. Government funds all or a portion of our efforts to develop next-generation microdisplay related technologies and products for aviation systems such as pilot helmets, soldier centric systems such as weapon sights, training and simulation systems and defense armored vehicles. This enables us to supplement our internal research and development budget with additional funding and adds to our expertise in technology, products and systems.
Understand Our Customer Needs. We believe our system know-how, be it a defense, industrial or consumer system, is a compelling reason why customers choose Kopin as their supplier. Unlike many of our competitors, we offer a range of display technologies, optics, backlights, and ASICs as either an individual component or in a system. We believe this enables us to provide superior technology solutions for our customers’ needs. Additionally, our human-factors and system understanding enables us to offer our customers valuable engineering services to solve their issues and reduce time to market for their products.

9

Internally Manufactured Products and Use of Third Party Manufacturing. We design and manufacture our transmissive and reflective display products in facilities that we lease and manage. However, the initial manufacturing steps fabricating the silicon wafers are performed at capital-intensive Taiwan foundries. With OLED displays, which we design, we similarly use silicon wafer foundries to produce our back planes, and we also use OLED deposition foundries to perform the OLED deposition steps for our displays. The use of these third-party foundries reduces our investments in plant and equipment and working capital for new products and enables us to update designs as technology and manufacturing trends change.

Markets and Customers

Our business model is to primarily generate product revenues by selling display components and subassemblies to customers who offer defense, industrial or consumer products and to a lesser extent license our system designs and know-how. We also enter into development contracts from customers to either design custom products for them or help them integrate our technology into their products (Funded Research and Development).

We currently sell our display products to our customers in various configuration including but not limited to a single display component, a module that includes a display, optic, backlight and focus mechanism and electronics, a binocular display module that includes two displays, lenses, and backlights, and as HLAs for defense customers. A HLA is similar to a module but includes additional components such as an eye cup specific to a defense application.

We have sold our AMLCD products to Collins Aerospace, Elbit, and DRS RSTA Inc. for use in defense applications, to Vuzix, RealWear and Iristik for enterprise wearable products, and to Scott Safety for public safety applications. We have sold our LCOS display products to Saki, Jutze and Mirtec for use in 3D metrology equipment. Our revenues from our OLED displays have primarily been from development contracts with customers that are designing our displays into their products.

In order for our AMLCD display products to function properly in their intended applications, ASICs and backlights are generally required. Several companies have designed ASICs to work with our display products and our customers can procure these chip sets directly from the manufacturer or through us.

For fiscal years 2021, 2020 and 2019, sales to defense customers, excluding research and development contracts, as a percentage of total revenue were 40%, 50% and 30%, respectively. For fiscal year 2021, Collins Aerospace and DRS Network & Imaging Systems LLC accounted for approximately 30% and 31% of our revenues, respectively.

For fiscal years 2021, 2020 and 2019, research and development revenues, primarily from multiple contracts with various prime contractors of U.S. government agencies, accounted for approximately 32%, 25% and 17%, respectively, of our total revenues.

Product Development

We believe that continued introduction of new products in our target markets is essential to our growth. Our industrial and consumer products tend to have one-to three-year life cycles. We have assembled a group of highly skilled engineers who work internally as well as with our customers to continue our product development efforts. Our primary development efforts are focused on AMLCD display subassemblies for defense and industrial applications and OLED display components for defense, industrial and consumer applications. In 2019 we commenced MicroLED display development under a customer funded development program and we are evaluating the commercial viability of MicroLED display products.

Component Products and Subassemblies

The pixel size of our current AMLCD transmissive display products ranges from 6.8 to 15 microns. These pixel sizes are much smaller than a pixel size of approximately 100 microns in a typical laptop computer display. The resolutions of our current commercially available AMLCD display products are 320 x 240, 432 x 240, 640 x 360, 640 x 480, 854 x 480, 800 x 600, 1,280 x 720 and 1,280 x 1,024 pixels. The pixel size of our current reflective display products ranges from 8.2 to 13.6 microns. The resolutions of our current commercially available reflective display products are 1,280 x 768, 1,280 x 1,024, 2,048 x 1,536, 2,048 x 2,048 and 2,560 x 1,440 pixels.

10

Our AMLCD display product development efforts are primarily focused on improving performance and reducing the manufacturing costs. We are continually evaluating our display manufacturing process in order to reduce cost. Our defense products include subassemblies and our advanced subassemblies are referred to as HLAs. The HLA may include a display, multiple optical lenses in a hermetically sealed housing. The HLAs are made to very exact tolerances, which require Kopin to manage its supply chain in order to procure raw materials that meet specification while enabling Kopin to achieve high yields.

The pixel size of our current OLED displays range from 7.8 to 9.2 microns with resolutions of 1,280 x 720, 2,048 x 2,048 and 2,560 x 2,560. We have only recently commenced OLED display developments and therefore our OLED products are much less mature than our AMLCD products. Accordingly, our current development efforts include expanding the resolutions offered, increasing the quantity of display active matrix pixel arrays processed on each wafer by further reducing the display size, increasing the light throughput of our pixels, increasing manufacturing yields, and increasing the functionality of our OLED products.

We offer components such as our optical lenses, backlights and ASICs, manufactured to our specifications, which we then buy and resell. The components that are made to order rely on either intellectual property we developed or acquired or that we license from third parties.

Funded Research and Development

We have entered into various development contracts with agencies and prime contractors of the U.S. government and commercial customers. These contracts help support the continued development of our core technologies. We intend to continue to pursue development contracts for applications that relate to our defense and commercial product applications. Our contracts contain certain milestones relating to technology development and may be terminated prior to completion of funding. Our funded development projects often lead to a product or component supply agreement. Our policy is to retain our proprietary rights with respect to the principal commercial applications of our technology, however, we are not always able to retain our proprietary rights. To the extent technology development has been funded by a U.S. federal agency, under applicable U.S. federal laws the federal agency that provided the funding has the right to obtain a non-exclusive, non-transferable, irrevocable, fully paid license to practice or have practiced this technology for governmental use. In addition, we may be required to negotiate intellectual property rights with our defense prime contractors. For our commercial development agreements customers often obtain exclusive rights to a particular display or technology that is developed either permanently or for some period of time. Revenues attributable to research and development contracts for fiscal years 2021, 2020 and 2019 totaled $14.7 million, $10.1 million and $5.0 million, respectively.

Competition

The general commercial display market is highly competitive and is currently dominated by large Asian-based electronics companies, including AUO, BOE Technology Group, Himax, LG Display, Samsung, Sharp, Sony and Texas Instruments. In additional, several companies focus on OLED microdisplays including eMAGIN, MicroOLED, Olightek, BOE Technology, Seeya, Seiko Epson and Sony. The display market consists of multiple segments, each focusing on different end-user applications applying different technologies. Competition in the display field is based on price and performance characteristics, product quality, size and the ability to deliver products in a timely fashion. The success of our display product offerings will also depend upon the adoption of our display products by consumers as an alternative to other active matrix LCDs or OLEDs and upon our ability to compete against other types of well-established display products and new emerging display products. Particularly significant is a consumer’s willingness to use a near eye display device, as opposed to a direct view display that may be viewed from a distance of several inches to several feet. Assuming a user is willing to use a near eye display device, companies such as Samsung and Oculus are offering near eye virtual reality headset products that use large display panels on glass to provide the image as opposed to using microdisplays. Displays on glass typically have lower resolution than our products but are lower in cost on a per square inch basis. We cannot be certain that we will be requiredable to reduce expenses, includingcompete against these companies and technologies, or that consumers will accept the use of such eyewear in general or our investmentscustomers’ product form-factor specifically.

11

There are also a number of AMLCD, LCOS, OLED, MicroLED and alternative display technologies in researchdevelopment and production. There are many large and small companies that manufacture or have in development products based on these technologies. We outsource the manufacturing of our OLED displays to Chinese foundries. We expect these foundries to offer their own products. Our display products will compete with other displays utilizing these and other competing display technologies.

There are many companies whose sole business is the development and manufacture of optical lenses, backlights, and ASICs. These companies may have significantly more intellectual property and experience than we do in the design and development of these components. We do not manufacture optical lenses, backlights, or raise additional capital;ASICs but we either have them made to our abilityspecifications or buy standard off-the-shelf products.

Patents, Proprietary Rights and Licenses

An important part of our product development strategy is to supportseek, when appropriate, protection for our operationsproducts and capital needs for at leastproprietary technology through the next twelve monthsuse of various U.S. and foreign patents and contractual arrangements. We intend to prosecute and defend our proprietary technology aggressively. Many of our U.S. patents and applications have counterpart foreign patents, foreign patent applications or international patent applications through the Patent Cooperation Treaty.

Human Capital Resources

As of December 25, 2021, our available cash resources;consolidated business employed 181 individuals. Of these employees, 8 hold Ph.D. degrees in Material Science, Electrical Engineering or Physics. Our management and professional employees have significant prior experience in semiconductor materials, device transistor and display processing, optical design, manufacturing and other related technologies. Our employees are located in the U.S., Europe and Asia and the laws regarding employee relationships are different by jurisdiction. None of our expectation that we will incur taxesemployees are covered by a collective bargaining agreement. We have policies to prevent discrimination based on gender, race, ethnicity, nationality, religion, sexual orientation, gender identity or gender expression. We take affirmative action to ensure that applicants are hired and that employees are treated during employment, without regard to their race, ethnicity, religion, sex, or national origin. We also take affirmative action to employ and advance veterans in employment. We consider relations with our foreign operations in 2019;employees to be good.

In 2004, we finalized and our expectation that we will haveadopted a state tax provision in 2019.


Item 1A.Risk Factors
Our management has identified a material weakness in our internal control over financial reportingCode of Business Conduct and has concluded that, due to such material weakness, our disclosure controls and procedures were not effective asEthics regarding the standards of the endconduct of our most recent fiscal year, December 29, 2018. If not remediated,directors, officers and employees. The code is reviewed and updated periodically by our failureBoard or Directors and is available on our website at www.kopin.com.

Environmental, Social & Governance (ESG) Initiatives

We strive to establishcreate and maintain effective disclosure controlsa working environment that fosters honesty and procedureshard work and internal control over financial reporting could result in material misstatements in our financial statements and a failure to meet our reporting and financial obligations, each of which could have a material adverse effect on our financial condition and the trading pricerewards all of our common stock. As discussed in Item 9A. “Controlsemployees’ hard work. We endeavor to make Kopin Corporation a place people are proud to be associated with. With the growing awareness of environmental and Procedures” in this Form 10-K/A


3






,social issues we have re-evaluated our internal control over financial reporting and our disclosure controls and procedures and concluded that they were not effective as of December 29, 2018 because of a material weakness. A material weakness is defined as a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. We are committed and are taking steps necessary to remediate the control deficiencies that constituted the material weakness by implementing changes to our internal control over financial reporting. We are in the process of designingcreating a more formalized ESG strategy. Our initial process for the strategy creation includes work by a cross-functional ESG team of leaders representing operations, human resources, supply chain, finance, marketing, and implementing measures to remediate the underlying causesfacilities departments. We also utilize third-party facility, environmental and legal consulting services. These third-party consultants are assisting us in creating an ESG materiality assessment from which we can develop a base-line assessment for monitoring our progress.

We provide recurring company-wide communication of our formalized values, a summary of which are:

IntegrityTeamCustomers
Uphold Ethical Standards in Our PerformanceTreat Everyone with RespectHighest Quality Customer Service Through Collaborative Success
Keep Our CommitmentsEncourage Open CommunicationProvide Industry Leading Products
Protect Our Intellectual PropertyPromote Critical Thinking and InnovationMaintain Confidentiality and Protect Customer Intellectual Property

We are not a member of the control deficienciesResponsible Business Alliance (“RBA”); however, we have utilized the themes of the RBA Code of Conduct to supplement our Code of Ethics, including the RBA Code’s five critical areas of corporate social responsibility: labor, health and safety, environment, management systems, and ethics. We believe that gave risefollowing the values noted above, we believe we can achieve our business objectives and long-term stockholder value while doing our part in each of these areas. For additional information, see “Human Capital Management” in this Form 10-K below.

12

Care for Our People

● We believe in upholding the principles of human rights, worker safety, and observing fair labor practices within our organization.

● We respect different viewpoints and perspectives, and that ultimately individual thoughts create innovation and achieve better results. We continually evaluate how we provide organizational training, formalize company values, and revitalize recruitment strategy.

● We are committed to employee safety. We have installed safety protocols and monitoring systems. We have periodic audits by third parties to test our systems and perform preventive maintenance. Our policies prohibit an employee from being alone in the facility or in unsupervised areas of our facility.

Environmental Responsibility

● We are committed to protecting the natural environment and our community by complying with all applicable legal and regulatory requirements. We maintain an environmental management system and a specific framework for implementing relevant sustainable practices.

● We ask our employees to help us accomplish environmental sustainability by looking for opportunities to conserve energy, reduce consumption of natural resources, preserve air and water quality, manage waste properly, and reuse and recycle, and reduce the use of toxic substances in our operations where possible, including, in particular, in our clean room and lab facilities. Our clean room facility emissions are less than permitting and reporting thresholds, and we track emissions monthly to verify compliance with the regulations.

● We look for ways to reduce energy consumption in our facilities around the world, including upgrades and or retrofits to smart HVAC systems. For instance, we have installed variable speed fans, which only turn-on based on various metrics, thereby reducing energy usage.

Ethics & Corporate Responsibility

● We are committed to ensuring ethical organizational governance, embracing diversity and inclusion in the board room and throughout the organization.

● We are committed to observing fair, transparent, and accountable operating practices.

● We seek to create and foster a healthy, balanced, and ethical work environment for everyone in our organization. To this end, we promote an ethical organizational culture and encourage all employees to raise questions or concerns about actual or potential ethical issues and company policies and to offer suggestions about how we can make our organization better. We have a Whistleblower Ethics Hotline that includes global telephone access and online access. We have an independent third party periodically test the Whistleblower Ethics Hotline.

Supply Chain Responsibility

● We intend to request that our suppliers adhere to the material weakness.RBA Code of Conduct or its equivalent by flowing this requirement through our commercial contracts.

● We also adhere to Rule 13p-1 under the Exchange Act and support efforts to avoid sourcing conflict minerals that directly or indirectly finance or benefit armed groups in the Democratic Republic of Congo (or DRC) and in adjoining countries. Consistent with the Organization for Economic Co-operation and Development Due Diligence Guidance concerning conflict minerals, we adopted the Conflict Free Sourcing Initiative Due Diligence reporting process and seek to obtain conflict minerals content declarations from our suppliers each year, all in an effort to promote supply chain transparency. We do not directly source tin, tantalum, tungsten, or gold (collectively referred to as 3TG) from mines, smelters or refiners, and we are in most cases several or more levels removed from these supply chain participants.

13

Government Regulations

Our business is subject to extensive regulation in the industries we serve. We deal with numerous U.S. government agencies and entities, including but not limited to branches of the Department of Defense (“DoD”).

U.S. defense contractors are among our largest customers, representing a substantial majority of our total revenues. The U.S. government may terminate a contract with us or our customers either “for convenience” (for instance, due to a change in its perceived needs) or if we default due to our failure or the failure of a general or subcontractor to perform under the contract. If the federal government terminates a contract with one of our stock price continuescustomers, our contract with our customers generally would entitle us to remain below $1.00,recover only our common stockincurred or committed costs, settlement expenses and possibly profit on the work completed prior to termination. However, under certain circumstances, our recovery costs upon termination for convenience of such a contract may be limited. If terminated by the government as a result of our default, we could be liable for payments made to us for undelivered goods or services, additional costs the government incurs in acquiring undelivered goods or services from another source and any other damages it suffers.

In addition, we are subject to a variety of federal, state and local governmental regulations including the use, storage, discharge and disposal of toxic, volatile or otherwise hazardous chemicals used in our manufacturing process. The failure to comply with present or future regulations could result in fines being imposed on us, suspension of production or cessation of operations. Any failure on our part to control the use of, or adequately restrict the discharge of, hazardous substances, or otherwise comply with environmental regulations, could subject us to significant future liabilities. We also cannot be certain that past use or disposal of environmentally sensitive materials in conformity with then existing environmental laws and regulations will protect us from required remediation or other liabilities under current or future environmental laws or regulations. Certain chemicals we import are subject to regulation by the U.S. government. If we or our suppliers do not comply with applicable laws, we could be subject to delisting fromadverse government actions and may not be able to import critical supplies.

We are also subject to federal International Traffic in Arms Regulations (“ITAR”) laws which regulate the protection (cybersecurity) and export of technical data and export of products to other nations that may use such data or products for defense purposes. The Nasdaq Stock Market. On October 9, 2019, we received a notice from The Nasdaq Stock Market ("Nasdaq") that the Company is not in compliance with Nasdaq's Listing Rule 5450(a)(1), as the minimum bid price of Kopin's common stock has been below $1.00 per share for 30 consecutive business days. The notification of noncompliance has no immediate effect on the listing or trading of Kopin's common stock on the Nasdaq Global Market under the symbol "KOPN." The Company has 180 calendar days, or until April 6, 2020, to achieve compliance with the minimum bid price requirement. To regain compliance, the minimum bid price of Kopin's common stock must meet or exceed $1.00 per share for a minimum ten consecutive business days during this 180-day grace period. The Company's failure to regain compliance during this periodcomply with present or future regulations could result in delisting. Kopin is presently evaluating various coursesfines being imposed on us, suspension of actionproduction, or a cessation of operations. Any failure on our part to regain compliance. There can be no assuranceobtain any required licenses for the export of technical data and/or export of our products or to otherwise comply with ITAR, could subject us to significant future liabilities.

14

We are also subject to federal importation laws that Kopinregulate the importation of raw materials and equipment from other nations that are used in our products. The failure to comply with present or future regulations could result in fines being imposed on us, suspension of production, or a cessation of operations.

Investments in Related Businesses

On September 30, 2019 we entered into an Asset Purchase Agreement (the “Solos Purchase Agreement”) with Solos Technology Limited (“Solos Technology”), pursuant to which we sold and licensed certain assets of our Solos (“Solos”) product line and Whisper Audio (“Whisper”) technology. As consideration for the transaction, we received 1,172,000 common shares representing a 20.0% equity stake in the Solos Technology’s parent company, Solos Incorporation (“Solos Inc”). Our 20.0% equity stake will be ablemaintained until Solos Inc. has raised a total of $7.5 million in equity financing after which we will need to regain complianceparticipate in future equity offerings or our ownership percentage will be diluted.

We acquired an equity interest in Lenovo New Vision in the first quarter of 2018 for $1.0 million and the Company also contributed certain intellectual property. As of December 25, 2021, we own an 11% interest in this investment and the carrying value of our investment is $3.9 million.

We acquired an equity interest in a medical device company in 2021. As of December 25, 2021 the carrying value of this investment is $0.3 million.

We own 100% of the outstanding common stock of NVIS and FDD and 80% of the outstanding common stock of e-MDT America (“eMDT”) and we consolidate each of their financial results within our consolidated financial statements.

We terminated operations of our subsidiary, Kopin Software Ltd., in the third quarter of 2019 and are in the process of liquidating it.

We may from time to time make further equity investments in these and other companies engaged in certain aspects of the display, electronics, optical and software industries as part of our business strategy. In addition, the wearable computing product market is relatively new and there may be other technologies we need to invest in to enhance our product offering. These investments may not provide us with Nasdaq's ruleany financial return or other benefit and any losses by these companies or associated losses in our investments may negatively impact our operating results.

Sources and Availability of Raw Materials and Components

We rely on third-party independent contractors for certain integrated circuit chip sets, backlights and other critical raw materials such as special glasses, wafers and chemicals. In addition, our CyberDisplay subassemblies, HLAs, binocular display modules, and other modules include lenses, backlights, printed circuit boards and other components that we purchase from third-party suppliers. Some of these third-party contractors and suppliers are small companies with limited financial resources. In addition, our defense customers typically buy a small number of units, which prevents us from qualifying and buying components economically from multiple vendors. As a result, we are highly dependent on a select number of third-party contractors and suppliers.

Availability Information

We make available free of charge through our website, www.kopin.com, our Annual Reports on Form 10-K and other reports that we file or furnish with the SEC as soon as reasonably practicable after they are filed or furnished, as well as certain of our corporate governance policies, including the charters for the Board of Directors’ audit, compensation and nominating and corporate governance committees and our code of ethics, corporate governance guidelines and whistleblower policy. We will otherwisealso provide to any person without charge, upon request, a copy of any of the foregoing materials. Any such request must be made in compliance with other Nasdaq listing criteria.writing to us, c/o Investor Relations, Kopin Corporation, 125 North Drive, Westborough, MA, 01581.

15

Item 1A.Risk Factors

We operate in a changing global environment that involves numerous known and unknown risks and uncertainties that could materially adversely affect our financial condition, results of operations, cash flows, and competitive position. Accordingly, our business and financial results are subject to a number of risks and uncertainties, including those set forth below or additional risks and uncertainties that are not currently known to us or that we currently do not believe to be material may also negatively affect our business and financial results. The risk factors set forth below describe what we believe to be the material risks, and uncertainties related to our financial condition, results of operations, cash flows, and competitive position. We have included the risk factors below without any reflection on the importance of, or likelihood of, any particular risk factor.

We have experienced a history of losses, have a significant accumulated deficit, have had negative cash flow from operating activities in 2018, 2017,fiscal years 2021, 2020, and 2016,2019, and expect to have negative cash flow from operating activities in 2019fiscal year 2022. Since inception, we have incurred significant net operating losses. As of December 29, 2018,25, 2021, we had an accumulated deficit of $271.7$319.1 million. At December 29, 201825, 2021 and December 30, 2017,26, 2020, we had $37.2$29.3 million and $68.8$20.7 million of cash and cash equivalents and marketable securities, respectively. For the years 20182021 and 2017,2020, net cash used in operating activities was $28.1$10.7 million and $25.9$4.4 million, respectively. The declineincrease in our cash and cash equivalents and marketable securities is primarily a result of sales of our common stock which partially offset funding our operating losses, of which a significant component is our investments in research and development for Wearable products. Our products are targeted towards the wearable market, which we believe is still developing and we cannot predict how long the wearable market will take to develop or if our products will be accepted. Accordingly, wedevelopment. We plan to continue to invest in research and development even during periods when we are not profitable, which may result in our incurring losses from operations and negative cash flow. If we do not soon achieve and maintain positive cash flow and profitability, our financial condition will ultimately be materially and adversely affected, and we will be required to raise additional capital. We may not be able to raise any necessary capital on commercially reasonable terms or at all. If we fail to achieve or maintain profitability on a quarterly or annual basis within the timeframe expected by investors, the market price of our common stock may decline.


Our history

There is a global shortage of net operating lossescritical semiconductor and other raw materials. It is important to understand that the failure to procure one semiconductor component can prevent the entire product from being manufactured and sold. We do not manufacture the integrated circuit chip sets that are used to in our display products and our accumulated deficit raise substantial doubtcustomers’ products. Instead, we rely on third party independent vendors and subcontractors for these integrated circuit chip sets. We purchase critical raw materials such as special glasses, special silicon on insulator (“SOI”) wafers, light emitting diodes, adhesives, chemicals, lenses, backlights, printed circuit boards and other components from third-party suppliers. We sell a relatively small volume of defense products and therefore our purchase of raw materials for our defense business is also relatively small. Because our purchase of raw materials is relatively small, qualifying and buying components from multiple vendors is not economically possible. In addition, our defense products typically have long life cycles which means many of the raw materials are based on older technology. We periodically receive notices from suppliers of our critical raw materials regarding their plans to stop selling those raw materials. This requires us to identify another raw material and/or raw material supplier to replace the discontinued item/supplier, which would then require us to internally re-qualify the product with the new material as well as possibly re-qualify the product with our abilitycustomer. The cost to continue as a going concern. If we do not continue as a going concern, investors could lose their entire investment. Our history of net operating losses, in addition to our significant accumulated deficit, has raised substantial doubt about our ability to continue as a going concern. Our ability to continue as a going concernrequalify is dependent upon our becoming profitableexpensive and time consuming and may result in the futuresuspension of production. If any of these third party contractors or suppliers were unable or unwilling to obtain the necessary capitalsupply these integrated circuit chip sets or critical raw materials to meetus, whether for business or regulatory reasons, we would be unable to manufacture and sell our obligations and repay our liabilities when they become due. Our determination of substantial doubt as going concerndisplay products until a replacement material could materially limit our ability to raise additional funds through the issuance of equity securities or otherwise. There can be no assurance that we will ever become profitable or continue as a going concern.


The market segment for our Wearable products may take longer to develop than we anticipate orfound. We may not develop, which may impact our abilitybe able to grow revenues. We have developed head-worn, voice and gesture controlled, hands-free cloud computing headset systems that we intend to sell and license to customers and various components for wearable devices that we intend to sell to customers as eitherfind a part of the license arrangement or separately. We refer to our headset systems and components sold to customers for use in consumer applications as our Wearable products. Our success will depend on the acceptance of wearable products by consumers and in particular the widespread adoption of the headset format. We are unable to predict whenreplacement material or if consumers will adopt wearable products. Customers may determine that the headset is not comfortable, weighs too much, costs too much or provides insufficient functionality. In addition, even if consumers accept the wearable headset products, Wearable product manufactures may choose to manufacture our competitors’ products. Our success in commercializing our Wearable products is very important in our ability to achieve positive cash flow and profitability. If we are unableable to commercialize our Wearable products,find a replacement material, we may be unable to increase revenuessell our products until they have been qualified both internally and with the customer. Lower volume purchases may make it uneconomical for some of our suppliers to provide the raw materials we need. We cannot assure that a replacement third-party contractor or achieve profitability or positive cash flow.

Our revenues and cash flowssupplier could be negatively affected if sales offound on reasonable terms or in a timely manner. Any interruption in our Display products for military applications significantly decline. The sale ofability to manufacture and distribute our display products could cause our display business to be unsuccessful and the price of our common stock may decline.

Most of our defense sales are on a fixed-price basis, which could subject us to losses if there are cost overruns. Under a fixed-price contract, we receive only the amount indicated in the contract, regardless of the actual cost to produce the goods. While firm fixed-price contracts allow us to benefit from potential cost savings, they also expose us to the military forrisk of cost overruns. If the initial estimates that we use in thermal weapon sightsto calculate the sales price and avionic helmetsthe cost to perform the work prove to be incorrect, we could incur losses. We have


4






been had situations where we have underestimated the cost of a primary source of our military revenues overprogram and incurred losses on fulfilling the last several years. We currently are designed in certain systems and are in qualification for other certain systems in the Family Weapon Sight ("FWS") program, which we believe is the next significant government procurement program that will use our technology. We may not be awarded the systemscontract. As discussed above we are seeing a global shortage of semiconductors and other raw materials which is resulting in qualification for, and for the systems we are qualified for we may only be awarded a portion of the program as the U.S. military looks to have multiple sources when possible.significant increase in raw material prices. In addition, the U.S. is experiencing inflation levels not seen in many years which is driving higher labor costs. Some of our contracts have specific provisions relating to cost, scheduling, and performance. If we fail to meet the terms specified in those contracts, then our cost to perform the work could increase, which would adversely affect our financial position and results of operations. Some of the contracts we bid on have Indefinite Delivery, Indefinite Quantity (“IDIQ”) provisions. This means we are bidding a fixed price but are not assured of the quantity the government will buy or when it will buy during the term of the contract. This means we are exposed to the risk of price increases for labor, overhead and raw materials during the term of the contract. We may incur losses on fixed-price and IDIQ contracts that we had expected to be profitable, or such contracts may be less profitable than expected, which could postponehave a material adverse effect on our business, financial condition, results of operations, and cash flows.

16

The continued pervasiveness of the COVID19 pandemic, or cancelthe widespread outbreak of any other illness or any other communicable disease, or any other public health crisis, could adversely affect our business, results of operations and financial condition. The COVID-19 pandemic has negatively affected the programs. Ourglobal and national economy, disrupted global supply chains, and created significant volatility in and disruption of financial markets. The extent of the impact of the COVID-19 pandemic on our operational and financial performance, including the ability to generate revenuesexecute business strategies and cash flow from sales to the U.S. military depends on our Display products being qualified and remaining qualifiedinitiatives in the F-35 Strike Fighter, FWSexpected time frame, will depend on future developments, including the emergence and other U.S. military programsspread of new variants of the virus and related governmental and societal responses and restrictions on the U.S. military funding these programs. We believe the U.S. military is evaluating alternative display technologies for the F-35 Strike Fighter program. Our abilitytravel and transportation or otherwise, and related governmental and societal responses and restrictions on travel and transportation or otherwise, all of which are uncertain and cannot be predicted at this time. An extended period of global supply chain and economic disruption could materially affect our business, results of operations, financial condition, and access to generate revenues and cash flow from sales to the U.S. military also depends on winning contracts over our competitors. If we are unable to be qualified into new U.S. military programs, remain qualified in existing programs, or win orders against our competition, or if military programs are not funded, then our ability to generate revenues and achieve profitability and positive cash flow will be negatively impacted.


sources of liquidity.

We generally do not have long-term contracts with our customers, which makes forecasting our revenues and operating results difficult. We generally do not enter into long-term agreements with our customers obligating them to purchase our products. Our business is characterized by short-term purchase orders andwith shipment schedules within one year and we generally permit orders to be canceled or rescheduled before shipment without significant penalty. As a result, our customers may cease purchasing our products at any time, which makes forecasting our revenues difficult. In addition, due to the absence of substantial non-cancelable backlog, we typically plan our production and inventory levels based on internal forecasts of customer demand, which are highly unpredictable and can fluctuate substantially. The uncertainty of product orders makes it difficult for us to forecast our sales and allocate our resources in a manner consistent with our actual sales. Moreover, our expense levels and the amounts we invest in capital equipment and new product development costs are based in part on our expectations of future sales and, if our expectations regarding future sales are inaccurate, we may be unable to reduce costs in a timely manner to adjust for sales shortfalls. If we fail to accurately forecastshortfalls, and our revenuesresults of operations and financial condition could be materially adversely affected.

Fluctuations in operating results our business may not be successfulmake financial forecasting difficult and could adversely affect the price of our common stockstock. Our quarterly and annual revenues and operating results may decline. fluctuate significantly for numerous reasons, including:

The timing of the initial selection of our display products as components in our customers’ new products;
Availability of interface electronics for our display products;
Competitive pressures on selling prices of our products;
The timing and cancellation of customer orders;
Our ability to introduce new products and technologies on a timely basis;
Our ability to successfully reduce costs;
The cancellation of U.S. government contracts; and
Our ability to secure agreements from our major customers for the purchase of our products.

17

As a result of these and other factors, investors should not rely on our revenues and our operating results for any one quarter or year as an indication of our future revenues or operating results. If our quarterly revenues or results of operations fall below expectations of investors or public market analysts, the price of our common stock could fall substantially.


Fluctuations

Our revenues and cash flows could be negatively affected if sales of our Display products for defense applications significantly decline or the current defense development programs are either cancelled or ultimately do not result in operating results make financial forecasting difficultfuture product sales. The sale of our display products to the military for use in thermal weapon sights and avionic helmets have been a primary source of our defense revenues and cash flows over the last several years. We currently are included in the Family Weapon Sight (“FWS”) Individual program and the Joint Strike Fighter (F-35) jet fighter program. We are in development and qualification in additional defense programs related to avionic helmets, armored vehicles and soldier rifle scopes. Our ability to generate revenues and cash flow from sales to the U.S. military depends on our Display products remaining qualified in the F-35 Joint Strike Fighter, FWS and other U.S. defense programs and on the U.S. government/military funding these programs. Our ability to generate revenues and cash flows also depends on the products we are developing and qualifying for other U.S. military programs being successfully qualified and the U.S. government/military funding these programs. We may not be awarded contracts for the systems we are in qualification for, and for the systems we are qualified for we may only be awarded a portion of the program as the U.S. military looks to have multiple sources when possible. In addition, the government could postpone or cancel these programs. We believe the U.S. Department of Defense is evaluating alternative display technologies for the F-35 Strike Fighter program and other defense programs, and we may need to requalify for any replacement display technologies. Our ability to generate revenues and cash flow from sales to the U.S. military also depends on winning contracts over our competitors. If we are unable to be qualified into new U.S. defense programs, remain qualified in existing programs, or win orders against our competition, or if defense programs are not funded, then our ability to generate revenues and achieve profitability and positive cash flow will be negatively impacted.

Our customers who purchase display products for defense applications typically incorporate our products into their products, which are sold to the U.S. government under contracts. U.S. government contracts generally are not fully funded at inception and may be terminated or modified prior to completion, which could adversely affect our business. Congress funds the pricevast majority of the federal budget on an annual basis, and Congress often does not provide agencies with all the money requested in their budget. Many of our customers’ contracts cover multiple years and, as such, are not fully funded at contract award. If Congress or a U.S. government agency chooses to spend money on other programs, our customers’ contracts may be terminated for convenience. Federal laws, collectively called the Anti-Deficiency Act, prohibit involving the government in any obligation to pay money before funds have been appropriated for that purpose, unless otherwise allowed by law. Therefore, the Anti-Deficiency Act indirectly regulates how agencies award our contracts and pay our invoices. Federal government contracts generally contain provisions that provide the federal government rights and remedies not typically found in commercial contracts, including provisions permitting the federal government to, among other things: terminate our existing contracts; modify some of the terms and conditions in our existing contracts; subject the award to protest or challenge by competitors; suspend work under existing multiple year contracts and related delivery orders; and claim rights in technologies and systems invented, developed or produced by us.

The federal government may terminate a contract with us or our customers either “for convenience” (for instance, due to a change in its perceived needs) or if we default due to our failure or the failure of a general or subcontractor to perform under the contract. If the federal government terminates a contract with one of our customers, our contract with our customers generally would entitle us to recover only our incurred or committed costs, settlement expenses and possibly retain any profit on the work that was completed prior to termination. However, under certain circumstances, our recovery costs upon termination for convenience of such a contract may be limited. As is common stock.with government contractors, we have experienced occasional performance issues under some of our contracts. We have received Stop Work Orders wherein work is suspended pending a review of the program. We may in the future receive show-cause or cure notices under contracts that, if not addressed to the federal government’s satisfaction, could give the government the right to terminate those contracts for default or to cease procuring our services under those contracts.

 Our quarterly

18

In addition, U.S. government contracts and annualsubcontracts typically involve long purchase and payment cycles, competitive bidding, qualification requirements, delays or changes in funding, extensive specification and performance requirements, price negotiations and milestone requirements. Each U.S. government agency often also maintains its own rules and regulations with which we must comply, and which can vary significantly among agencies.

We recognize revenue for our defense contracts and some commercial contracts based on percentage of completion that requires significant management judgement, and errors in our judgement could result in our revenue being overstated or understated and the profits or loss reported could be subject to adjustment. For certain contracts with the U.S. government, the Company recognizes revenue over time as we perform services or deliver goods. The continuous transfer of control to, or performance of services for, the customer is subject to liability clauses in the contract that allow the U.S. government to unilaterally terminate the contract for convenience, pay us for costs incurred plus a reasonable profit and take control of any work in process. Contracts with commercial customers may have a similar liability clause. In situations where control transfers or services are performed over time, revenue is recognized based on the extent of progress towards completion of the performance obligation. We generally use the cost-to-cost approach to measure the extent of progress towards completion of the contractual obligation for our contracts. Under the cost-to-cost measure approach, the extent of progress towards completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligation. Revenues are recorded proportionally as costs are incurred. Accounting for design, development and production contracts requires judgment relative to assessing risks, estimating contract revenues and operating results may fluctuate significantlycosts and making assumptions for numerous reasons, including:


The timingschedule and technical issues. Due to the size and nature of the initial selectionwork required to be performed on many of our Wearable technologycontracts, the estimation of total revenue and display productscost at completion is complicated and subject to many variables. Contract costs include material, labor and subcontracting costs, as componentswell as an allocation of indirect costs. We have to make assumptions regarding the number of labor hours required to complete a task, the complexity of the work to be performed, the availability and cost of materials and performance by our subcontractors. For contract change orders, claims or similar items, we apply judgment in estimating the amounts and assessing the potential for realization. These amounts are only included in contract value when they can be reliably estimated, and realization is considered probable. If our customers' new products;estimate of total contract costs or our determination of whether the customer agrees that a milestone is achieved is incorrect, our revenue could be overstated or understated, and the profits or loss reported could be subject to adjustment. If our revenues and costs require adjustment our stock price could decline.

19
Availability of interface electronics for our display products;

Competitive pressures on selling prices of our products;
The timing and cancellation of customer orders;
Our ability to introduce new products and technologies on a timely basis;
Our ability to successfully reduce costs;
The cancellation of

A decline in the U.S. government contracts;defense budget, changes in spending or budgetary priorities, a prolonged U.S. government shutdown or delays in contract awards may significantly and

Our ability adversely affect our future revenues, cash flow and financial results. In addition to secure agreements from our major customers for the purchase of our products.

Anti-Deficiency Act, in recent years, U.S. government appropriations have been affected by larger U.S. government budgetary issues and related legislation. As a result, DoD funding levels have fluctuated and been difficult to predict. Future spending levels are subject to a wide range of thesefactors, including Congressional action. In addition, in recent years the U.S. government has been unable to complete its budget process before the end of its fiscal year, resulting in both a government shutdown and othercontinuing resolutions to extend sufficient funds only for U.S. government agencies to continue operating. Most recently, the federal government was shut down due to lack of funding for over one month between late 2018 and early 2019. Additionally, the national debt has recently threatened to reach the statutory debt ceiling, and such an event in future years could result in the U.S. government defaulting on its debts.

As a result, defense spending levels are difficult to predict beyond the near-term due to numerous factors, investors should not relyincluding the external threat environment, future government priorities and the state of government finances. Significant changes in defense spending or changes in U.S. government priorities, policies and requirements could have a material adverse effect on our revenues and our operating results for any one quarter or year as an indication of our future revenues or operating results. If our quarterly revenues or results of operations, fall below expectationsfinancial condition or liquidity.

If we fail to comply with complex procurement laws and regulations, we could lose business and be liable for various penalties or sanctions. We must comply with laws and regulations relating to the formation, administration and performance of investors or public market analysts,federal government contracts. These laws and regulations affect how we conduct business with our federal government customers. In complying with these laws and regulations, we may incur additional costs, and non-compliance may result in fines and penalties, including contractual damages. Among the pricemore significant laws and regulations affecting our business are:

The Federal Acquisition Regulation, which comprehensively regulates the formation, administration and performance of federal government contracts;
The Truth in Negotiations Act, which requires certification and disclosure of all cost and pricing data in connection with contract negotiations;
The Cost Accounting Standards and Cost Principles, which impose accounting requirements that govern our right to reimbursement under certain cost-based federal government contracts; and
Laws, regulations and executive orders restricting the use and dissemination of information classified for national security purposes and the export of certain products, services and technical data. We engage in international work falling under the jurisdiction of U.S. export control laws. Failure to comply with these control regimes can lead to severe penalties, both civil and criminal, and can include debarment from contracting with the U.S. government.

Our contracting agency customers may review our performance under and compliance with the terms of our common stockfederal government contracts. If a government review or investigation uncovers improper or illegal activities, we may be subject to civil or criminal penalties or administrative sanctions, including:

Termination of contracts;
Forfeiture of profits;
Cost associated with triggering of price reduction clauses;
Suspension of payments;
Fines; and
Suspension or debarment from doing business with federal government agencies.

20

Additionally, the False Claims Act provides for substantial civil penalties where, for example, a contractor presents a false or fraudulent claim to the government for payment or approval. Civil actions under the False Claims Act may be brought by the government or by other persons on behalf of the government (who may then share a portion of any recovery).

If we fail to comply with these laws and regulations, we may also suffer harm to our reputation, which could fall substantially.


impair our ability to win awards of contracts in the future or receive renewals of existing contracts. If we are subject to civil or criminal penalties and administrative sanctions or suffer harm to our reputation, our current business, future prospects, financial condition or operating results could be materially harmed.

The U.S. government may also revise its procurement practices or adopt new contracting rules and regulations, including cost accounting standards, at any time. Any new contracting methods could be costly to satisfy, be administratively difficult for us to implement and could impair our ability to obtain new contracts.

Our ability to manufacture and distribute our Display products would be severely limited if the foundries that we rely on to manufacture integrated circuits for our Display products fail to provide those services. We depend principally on a Taiwanese foundry for the fabrication of integrated circuits for our defense display products. In addition, our strategy is to use Chinese foundryfoundries services for OLED deposition and processing of OLED displays. We also use foundries in Korea and France. We have no long-term contracts with the foundries we use and from time to time we have been put on allocation, which means the foundry will limit the number of wafers they will process for us. If foundries were to terminate or amend their arrangement with us or become unable to provide the required capacity, services and or quality on a timely basis, we may not be able to manufacture and ship our Display products or we may be forced to manufacture them in limited quantities until replacement foundry services can be obtained. Furthermore, we cannot assure that we would be able to establish alternative manufacturing and packaging relationships on acceptable terms.


Our reliance on these foundries involves certain risks, including but not limited to:



5






Lack of control over production capacity and delivery schedules;
Limited control over quality assurance, manufacturing yields and production costs;
The risks associated with international commerce, including unexpected changes in legal and regulatory requirements, changes in tariffs and trade policies and political and economic instability; and
Natural disasters such as earthquakes, tsunami, mudslides, drought, hurricanes and tornadoes.

Lack of control over production capacity and delivery schedules;
Limited control over quality assurance, manufacturing yields and production costs;
The risks associated with international commerce, including unexpected changes in legal and regulatory requirements, changes in tariffs and trade policies and political and economic instability; and
Natural disasters such as earthquakes, tsunami, mudslides, drought, hurricanes and tornadoes.

Due to natural disasters such as earthquakes and typhoons that have occasionally occurred in Asia, many Taiwanese companies, including the Taiwanese foundry we use, have experienced related business interruptions. Our business could suffer significantly if any of the foundries we use hadhave their operations disrupted for an extended period of time due to natural disaster, political unrest or financial instability.


We depend on third parties to provide integrated circuit chip sets and critical raw materials for use with our headset systems and components and we periodically receive “end of life” notices from suppliers that they will no longer be providing a raw material. We do not manufacture the integrated circuit chip sets that are used to electronically interface between our display products and our customers’ products. Instead, we rely on third party independent contractors for these integrated circuit chip sets. We purchase critical raw materials such as special glasses, special silicon on insulator ("SOI") wafers, LED, adhesives, chemicals, lenses, backlights, printed circuit boards and other components from third party suppliers. Some of these third party contractors and suppliers are small companies with limited financial resources. In addition, relative to the commercial market, the military buys a small number of units, which prevents us from qualifying and buying components economically from multiple vendors. We periodically receive notices from suppliers of our critical raw materials regarding their plans to stop selling those raw materials. This requires us to identify another raw material and/or raw material supplier to replace the discontinued item/supplier, which would then require us to internally re-qualify the product with the new material as well as possibly re-qualify the product with our customer. If any of these third party contractors or suppliers were unable or unwilling to supply these integrated circuit chip sets or critical raw materials to us, whether for business or regulatory reasons, we wouldmay be unable to manufactureadequately control purchase pricing of certain critical materials, which may materially adversely affect our sales or profitability. We have no long-term pricing contracts on foundry wafers and sell our displaycertain other materials that represent a significant portion of product bill of material costs. We cannot provide assurance against supplier price increases that negatively impact the cost of producing products, untilwhich may adversely affect sales or profitability. Finding and/or qualifying a more cost-effective replacement material could be found. Wesupplier may take significant time.

21

Our investments in the development and sale of OLED microdisplays may not be ablesuccessful which may materially adversely affect our sales, profitability and cash flow. Hstorically, we have sold products that incorporate our proprietary AMLCDs. We believe that for certain applications OLED microdisplays have performance advantages and we believe some customers have switched or will want to find a replacement material or chemicalswitch from AMCLDs to OLED microdisplays in the next two to three years. We are in the process of designing and developing OLED microdisplays. We expect to make significant monetary investments in their development, though our plan is to outsource their production. We have little experience in production outsourcing. If we are unsuccessful in designing and developing OLED microdisplays or if we are ableunable to find a replacement material wecost-effective third party production partners, our sales and profitability may be unable to sell our products until they have been qualified both internally and with the customer. Lower volume purchases may make it uneconomical for some of our suppliers to provide the raw materials we need. We cannot assure investors that a replacement third party contractor or supplier could be found on reasonable terms or in a timely manner. Any interruption in our ability to manufacture and distribute our display products could cause our display business to be unsuccessful and the price of our common stock may decline.negatively affected.


The markets in which we operate are highly competitive and rapidly changing and we may be unable to compete successfully. There are a number of companies that develop or may develop products that compete in our targeted markets. The individual components that we offer for sale (displays, optical lenses, backlights and ASICs, the Whisper Chip)ASICs) are also offered by companies whose sole business focuses on that individual component. For example, there are companies whose sole business is to sell optical lenses. Accordingly, our strategy requires us to develop technologies and to compete in multiple markets. Some of our competitors are much larger than we are and have significantly greater financial, development and marketing resources than we do. The competition in these markets could adversely affect our operating results by reducing the volume of the products we sell or the prices we can charge. These competitors may be able to respond more rapidly than us to new or emerging technologies or changes in customer requirements. They may also devote greater resources to the development, promotion and sale of their products than we do.


Our success will depend substantially upon our ability to enhance our products and technologies and to develop and introduce, on a timely and cost-effective basis, new products and features that meet changing customer requirements and incorporate technological enhancements. If we are unable to develop new products and enhance functionalities or technologies to adapt to these changes, our business will suffer.


Disruptions of our production could adversely affect our operating results. If we were to experience any significant disruption in the operation of our facilities, we would be unable to supply our products to our customers. Many of our sales contracts include financial penalties for late delivery. In the past, we have experienced power outages at our facilities, which ranged in duration from one to four days. We have certain critical pieces of equipment necessary to operate our facilities that are no longer offered for sale and we may not have service contracts or spare parts for the equipment. Additionally, as we introduce new equipment into our manufacturing processes, our display products could be subject to especially wide variations in manufacturing yields and efficiency. We may experience manufacturing problems that would result in delays in product introduction and delivery or yield fluctuations.

22


6






A disruption to our information technology systems could significantly impact our operations, revenue and profitability. Our data processing systems and our Enterprise Resource Planning (“ERP”) software are cloud-based and hosted by third parties. We also use software packages that are no longer supported by their developer. We have experienced short-term (i.e., a few days) interruptions in our Internet connectivity. An interruption of the third party systems or the infrastructure that allows us to connect to the third party systems for an extended period may affect our ability to operate our business and process transactions, which could result in a decline in sales and affect our ability to achieve or maintain profitability.


If our information technology security systems were penetratedinfiltrated and confidential and and/or proprietary information were taken, we could be subject to fines, law suitslawsuits and loss of customers. Significantly larger organizations with much greater resources than us have been the victim of cybercrimes. We routinely receive emails probing our Internet security, and our Internet security systems have detected outside organizations attempting to install Trojan virus software packages in our systems. We rely on our electronic information systems to perform the routine transactions to run our business. We transact business over the Internet with customers, vendors and our subsidiaries and have implemented security measures to protect unauthorized access to this information. We have also implemented security policies that limit access via the Internet from the Company to the outside world based on the individual’s position in the Company. We routinely receive security patches from software providers for the software we use. Our primary concerns are inappropriate access to personnel information, information covered under the International Traffic in Arms Regulation, product designs and manufacturing information, financial information and our intellectual property, trade secrets and know-how.


Our headset systems depend on software that

We may not achieve some or all of the anticipated benefits of our equity investments. At December 25, 2021 we had equity investments in companies totaling $4.6 million, where we have limited, experienceif any, control over their governance, financial reporting and operations. As a result, we face certain operating, financial and other risks relating to these investments, including risks related to the financial strength of the investments. We are required to periodically review the value of these investments for impairment. For example, in developing, marketingthe fourth quarter of 2019, we reviewed the financial condition and other factors of RealWear and as a result, in the fourth quarter of 2019, we recorded an impairment charge of $5.2 million to reduce our investment in RealWear to zero. These investments may not contribute to our earnings or licensing. Our headset systems include a combination of commercially available software and operating and speech enhancement software that we internally developed or acquired.cash flows. In addition, we are offering the Whisper Chip,these investments may be required to raise additional capital, which is an integrated circuit that contains software developed by us. We have little experience in developing, marketing or licensing software. If we are unable to integrate internally developed or acquired softwaremay result in our headset system, we may not be able to license such designs. The market demand for our headset systems or the products our customers may develop based on our headset systems depends on our ability to collaborate with software developers who write application software in order to create utility for our customer’s products. If we are unable to develop, license or acquire software or if we or the market in general does not create a sufficient body of application software, our systems may not be accepted by the market and we may not be able to increase revenues, achieve profitability or positive cash flow.ownership percentage being decreased.


If we are unable to obtain or maintain existing software license relationships or other relationships relating to the intellectual property we use, our ability to grow revenue and achieve profitability and positive cash flow may be negatively affected. Our headset systems include software that we license from other companies. Should we violate the terms of a license, our license could be canceled. Companies may decide to stop supporting the software we license or new versions of the software may not be compatible with our software, which would require us to rewrite our software, which we may not be able to do. Moreover, the license fees we pay may be increased, which would negatively affect our ability to achieve profitability and positive cash flow.

23

Our headset systems use software that we license from other companies ("Licensors") and require us to access the Licensors’ data centers, and interruptions or delays in service from data center hosting facilities could impair our customers’ products. Any damage to, or failure of, our Licensors’ systems generally could result in interruptions in service to our customers. Interruptions in service to our customers may reduce our revenue, cause us to issue credits or pay penalties, cause customers to terminate their contracts and reduce our ability to attract new customers.

The process of seeking patent protection can be time consuming and expensive and we cannot be certain that patents will be issued from currently pending or future patent applications or that our existing patents or any new patents that may be issued will be sufficient in scope and strength to provide meaningful protection or any commercial advantage to us.

 We may be subject to or may initiate contested patent or patent application proceedings in the United States Patent and Trademark Office, foreign patent offices or the courts, which can demand significant financial and management resources. Patent applications in the U.S. typically are maintained in secrecy until they are published about 18 months after their earliest claim to priority. As publication of discoveries in the scientific and patent literature lags behind actual discoveries, we cannot be certain that we were the first to conceive of inventions covered by our pending patent applications or the first to file patent applications on such inventions. We also cannot be certain that our pending patent applications or those of our licensors will result in issued patents or that any issued patents will afford protection against a competitor. In addition, we cannot be certain that others will not obtain patents that we would need to license, circumvent or cease manufacturing and sales of products covered by these patents, nor can we be sure that licenses, if needed, would be available to us on favorable terms, if at all.



7






We may incur substantial costs in defending our intellectual property and may not be successful in protecting our intellectual property and proprietary rights. Our success depends in part on our ability to protect our intellectual property and proprietary rights. We have obtained certain domestic and foreign patents and we intend to continue to seek patents on our inventions when appropriate. We also attempt to protect our proprietary information with contractual arrangements and under trade secret laws. Our employees and consultants generally enter into agreements containing provisions with respect to confidentiality and the assignment of rights to us for inventions made by them while in our employ or consulting for us. These measures may not adequately protect our intellectual property or proprietary rights. Existing trade secret, trademark and copyright laws afford only limited protection and our patents could be invalidated, held to be unenforceable or circumvented. Moreover, the laws of certain foreign countries in which our products are or may be manufactured or sold may not provide full protection of our intellectual property rights. Misappropriation of our technology and the costs of defending our intellectual property rights from misappropriation could substantially impair our business. If we are unable to protect our intellectual property or proprietary rights, our business may not be successful, and the price of our common stock may decline.


The process of seeking patent protection can be time consuming and expensive and we cannot be certain that patents will be issued from currently pending or future patent applications. We cannot be certain that domestic or foreign intellectual property laws will allow protection of our intellectual property rights or that others will not independently develop similar products, duplicate our products or design around any patents issued or licensed to us. Our products might infringe upon the patent rights of others, whether existing now or in the future. For the same reasons, the products of others could infringe upon our patent rights. We may be notified, from timesubject to time, thator may initiate contested patent or patent application proceedings in the United States Patent and Trademark Office, foreign patent offices or the courts, which can demand significant financial and management resources. Patent applications in the U.S. typically are maintained in secrecy until they are published about 18 months after their earliest claim to priority. As publication of discoveries in the scientific and patent literature lags behind actual discoveries, we could be or we are infringing certain patents or other intellectual property rights of others. Litigation, which could be very costly and lead to substantial diversion of our resources, even if the outcome is favorable, may be necessary to enforce our patents or other intellectual property rights or to defend us against claimed infringement of the rights of others. These problems can be particularly severe in foreign countries. In the event of an adverse ruling in litigation against us for patent infringement, we might be required to discontinue the use of certain processes, and cease the manufacture, use, importation and/or sale of infringing products, expend significant resources to develop non-infringing technology or obtain licenses to patents of third parties covering the infringing technology. We cannot be certain that we were the first to conceive of inventions covered by our pending patent applications or the first to file patent applications on such inventions. We also cannot be certain that our pending patent applications or those of our licensors will result in issued patents or that any issued patents will provide adequate protection against a competitor. In addition, we cannot be certain that others will not obtain patents that we would need to license or could force us to retool or cease manufacturing and sales of products covered by these patents, nor can we be sure that licenses, willif needed, would be obtainableavailable to us on acceptablefavorable terms, if at all, or that damages for infringement will not be assessed or that litigation will not occur. The failure to obtain necessary licenses or other rights or litigation arising out of any such claims could adversely affect our ability to conduct our business as we presently conduct it and as we plan to conduct it in the future.all.


We also attempt to protect our proprietary information with contractual arrangements and under trade secret laws. We believe that our future success will depend primarily upon the technical expertise, creative skills and management abilities of our officers and key employees in addition to patent ownership. Our employees enter into agreements containing provisions with respect to confidentiality and assignment of rights to us for inventions made by them while in our employ. Agreements with consultants generally provide that rights to inventions made by them while consulting for us will be assigned to us unless the assignment of rights is prohibited by the terms of any of their prior agreements. Agreements with employees, consultants and collaborators contain provisions intended to further protect the confidentiality of our proprietary information. To date, we have had no experience in enforcing these agreements. We cannot be certain that these agreements will not be breached or that we would have adequate remedies for any breaches. Our trade secrets may not be secure from discovery or independent development by competitors, in which case we may not be able to rely on these trade secrets to prevent our competitors from using them.


Our products could infringe on the intellectual property rights of others. Companies in the wearable computing and display industriesindustry steadfastly pursue and protect their intellectual property rights. This has resulted in considerable and costly litigation to determine the validity and enforceability of patents and claims by third parties of infringement of patents or other intellectual property. Our products could be found to infringe on the intellectual property rights of others. Other companies may hold or obtain patents on inventions or other proprietary rights in technology necessary for our business. Periodically, companies inquire about our products and technology in their attempts to assess whether we violate their intellectual property rights. In the event that our products might infringe upon the patent rights of others, we may be notified, from time to time, that we could be or we are infringing certain patents or other intellectual property rights of others. If we are forced to defend against patent infringement claims, we may face costly litigation, diversion of technical and management personnel, and product shipment delays, even if the allegations of infringement are unwarranted. If there are one or more successful claims of infringement against us and we are unable to develop non-infringing technology or license the infringed or similar technology on a timely basis, or if we are required to cease the manufacture, use, importation and/or sale of infringing products, expend significant resources to develop non-infringing technology or obtain licenses to patents of third parties covering the infringing technology or using one or more of our business or product names due to a successful trademark infringement claim against us, our business could be adversely affected. We are currently involved in an intellectual property dispute with Blue Radios, Inc., as described under Item 3. Legal Proceedings. If the outcome of such dispute is adverse to us, our business could be adversely affected. We cannot be certain that licenses will be obtainable on acceptable terms, if at all, or that damages for infringement will not be assessed or that litigation will not occur. The failure to obtain necessary licenses or other rights or litigation arising out of any such claims could adversely affect our ability to conduct our business as we presently conduct it and as we plan to conduct it in the future.

24

Our business could suffer if we lose the services of, or fail to attract, key personnel. To continue to provide quality products in our rapidly changing business, we believe it is important to retain personnel with experience and expertise relevant to our business. Our success depends in large part upon a number of key management and technical employees. The loss of the


8






services of one or more key employees, including Dr. John C.C. Fan, our President and Chief Executive Officer, could seriously impede our success. We do not maintain any “key-man” insurance policies on Dr. Fan or any other employees. In addition, due to the level of technical and marketing expertise necessary to support our existing and new customers, our success will depend upon our ability to attract and retain highly skilled management, technical, and sales and marketing personnel. Competition for highly skilled personnel is intense and there may be only a limited number of persons with the requisite skills to serve in these positions. Due to the competitive nature of the labor markets in which we operate, we may be unsuccessful in attracting and retaining these personnel. Our inability to attract and retain key personnel could adversely affect our ability to develop and manufacture our products.

Our customers who purchase display products for military applications typically incorporate our products into their products, which are sold to the U.S. government under contracts. U.S. government contracts generally are not fully funded at inception and may be terminated or modified prior to completion, which could adversely affect our business. 

Congress funds the vast majority of the federal budget on an annual basis, and Congress often does not provide agencies with all the money requested in their budget. Many of our customers' contracts cover multiple years and, as such, are not fully funded at contract award. If Congress or a U.S. government agency chooses to spend money on other programs, our customers' contracts may be terminated for convenience. Federal laws, collectively called the Anti-Deficiency Act, prohibit involving the government in any obligation to pay money before funds have been appropriated for that purpose, unless otherwise allowed by law. Therefore, the Anti-Deficiency Act indirectly regulates how the agency awards our contracts and pays our invoices. Federal government contracts generally contain provisions, and are subject to laws and regulations, that provide the federal government rights and remedies not typically found in commercial contracts, including provisions permitting the federal government to, among other provisions: terminate our existing contracts; modify some of the terms and conditions in our existing contracts; subject the award to protest or challenge by competitors; suspend work under existing multiple year contracts and related delivery orders; and claim rights in technologies and systems invented, developed or produced by us.


The federal government may terminate a contract with us or our customers either “for convenience” (for instance, due to a change in its perceived needs) or if we default due to our failure or the failure of a general or subcontractor to perform under the contract. If the federal government terminates a contract with one of our customers, our contract with our customers generally would entitle us to recover only our incurred or committed costs, settlement expenses and profit on the work completed prior to termination. However, under certain circumstances, our recovery costs upon termination for convenience of such a contract may be limited. As is common with government contractors, we have experienced occasional performance issues under some of our contracts. We may in the future receive show-cause or cure notices under contracts that, if not addressed to the federal government's satisfaction, could give the government the right to terminate those contracts for default or to cease procuring our services under those contracts.

In addition, U.S. government contracts and subcontracts typically involve long purchase and payment cycles, competitive bidding, qualification requirements, delays or changes in funding, extensive specification and performance requirements, price negotiations and milestone requirements. Each U.S. government agency often also maintains its own rules and regulations with which we must comply and which can vary significantly among agencies.

Most of our military sales are on a fixed-price basis, which could subject us to losses if there are cost overruns. Under a fixed-price contract, we receive only the amount indicated in the contract, regardless of the actual cost to produce the goods. While firm fixed-price contracts allow us to benefit from potential cost savings, they also expose us to the risk of cost overruns. If the initial estimates that we use to calculate the sales price and the cost to perform the work prove to be incorrect, we could incur losses. In addition, some of our contracts have specific provisions relating to cost, scheduling, and performance. If we fail to meet the terms specified in those contracts, then our cost to perform the work could increase, which would adversely affect our financial position and results of operations. Some of the contracts we bid on have “Indefinite Delivery, Indefinite Quantity” or IDIQ provisions. This means we are bidding a fixed price but are not assured of the quantity the government will buy or when it will buy during the term of the contract. This means we are exposed to the risk of price increases for labor, overhead and raw materials during the term of the contract. We may incur losses on fixed-price and IDIQ contracts that we had expected to be profitable, or such contracts may be less profitable than expected, which could have a material adverse effect on our business, financial condition, results of operations, and cash flows.
If we fail to keep pace with changing technologies, we may lose customers. Rapidly changing customer requirements, evolving technologies and industry standards characterize our industries. To achieve our goals, we need to enhance our existing products and develop and market new products that keep pace with continuing changes in industry standards, requirements and customer preferences. We may be unable to bring to market technologies and products that are attractive to our customers, and as a result our business, financial condition and results of operations may be materially adversely affected.


9






If we fail to comply with complex procurement laws and regulations, we could lose business and be liable for various penalties or sanctions. 

We must comply with laws and regulations relating to the formation, administration and performance of federal government contracts. These laws and regulations affect how we conduct business with our federal government customers. In complying with these laws and regulations, we may incur additional costs, and non-compliance may result in fines and penalties, including contractual damages. Among the more significant laws and regulations affecting our business are:


The Federal Acquisition Regulation, which comprehensively regulates the formation, administration and performance of federal government contracts;
The Truth in Negotiations Act, which requires certification and disclosure of all cost and pricing data in connection with contract negotiations;
The Cost Accounting Standards and Cost Principles, which impose accounting requirements that govern our right to reimbursement under certain cost-based federal government contracts; and
Laws, regulations and executive orders restricting the use and dissemination of information classified for national security purposes and the export of certain products, services and technical data. We engage in international work falling under the jurisdiction of U.S. export control laws. Failure to comply with these control regimes can lead to severe penalties, both civil and criminal, and can include debarment from contracting with the U.S. government.

Our contracting agency customers may review our performance under and compliance with the terms of our federal government contracts. If a government review or investigation uncovers improper or illegal activities, we may be subject to civil or criminal penalties or administrative sanctions, including:

Termination of contracts;
Forfeiture of profits;
Cost associated with triggering of price reduction clauses;
Suspension of payments;
Fines; and
Suspension or debarment from doing business with federal government agencies.

Additionally, the False Claims Act provides for substantial civil penalties where, for example, a contractor presents a false or fraudulent claim to the government for payment or approval. Civil actions under the False Claims Act may be brought by the government or by other persons on behalf of the government (who may then share a portion of any recovery).

If we fail to comply with these laws and regulations, we may also suffer harm to our reputation, which could impair our ability to win awards of contracts in the future or receive renewals of existing contracts. If we are subject to civil or criminal penalties and administrative sanctions or suffer harm to our reputation, our current business, future prospects, financial condition, or operating results could be materially harmed.

The U.S. government may also revise its procurement practices or adopt new contracting rules and regulations, including cost accounting standards, at any time. Any new contracting methods could be costly to satisfy, be administratively difficult for us to implement and could impair our ability to obtain new contracts.

A decline in the U.S. government defense budget, changes in spending or budgetary priorities, prolonged U.S. government shutdown or delays in contract awards may significantly and adversely affect our future revenues, cash flow and financial results. In recent years, U.S. government appropriations have been affected by larger U.S. government budgetary issues and related legislation. In 2011, Congress enacted the Budget Control Act of 2011 ("BCA"), which established specific limits on annual appropriations for fiscal years ("FY") 2012-2021 and has since been amended a number of times, most recently by the Bipartisan Budget Act of 2018 (“BBA18”). As a result, Department of Defense ("DoD") funding levels have fluctuated over this period and have been difficult to predict. Future spending levels are subject to a wide range of outcomes, depending on Congressional action. In addition, in recent years the U.S. government has been unable to complete its budget process before the end of its fiscal year, resulting in both a government shutdown and continuing resolutions to extend sufficient funds only for U.S. government agencies to continue operating. Most recently, the federal government was shut down due to lack of funding for over one month between late 2018 and early 2019. Additionally, the national debt has recently threatened to reach the statutory debt ceiling, and such an event in future years could result in the U.S. government defaulting on its debts.

As a result, defense spending levels are difficult to predict beyond the near-term due to numerous factors, including the external threat environment, future government priorities and the state of government finances. Significant changes in defense spending or changes in U.S. government priorities, policies and requirements could have a material adverse effect on our results of operations, financial condition or liquidity.

10







Customer demands and new regulations related to conflict-free minerals may adversely affect us. The Dodd-Frank Wall Street Reform and Consumer Protection Act (the “Dodd-Frank Act”) imposes new disclosure requirements regarding the use of “conflict” minerals mined from the Democratic Republic of Congo and adjoining countries in products, whether or not these products are manufactured by third parties. These requirements could affect the pricing, sourcing and availability of minerals used in the manufacture of semiconductor devices (including our products). We have incurred additional costs associated with complying with the disclosure requirements, such as costs related to determining the source of any conflict minerals used in our products. Our supply chain is complex and we may be unable to verify the origins for all metals used in our products. We purchase materials from foreign sources that may not cooperate and provide us with the necessary information to allow us to comply with the Dodd-Frank Act. This may require us to find alternative sources, which could delay product shipments. We may also encounter challenges with our customers and stockholders if we are unable to certify that our products are conflict-free.

Changes in tax laws, unfavorable resolution of tax examinations, or exposure to additional tax liabilities could have a material adverse effect on our results of operations, financial condition and liquidity. We are subject to taxes in the U.S., Korea, China and the United Kingdom. Governments in the jurisdictions in which we operate implement changes to tax laws and regulations periodically. Any implementation of tax laws that fundamentally change the taxation of corporations in the U.S. or in the foreign jurisdictions in which we operate could materially affect our effective tax rate and could have a significant adverse impact on our financial results.


The 2017 United States Tax Cut and Jobs Act (“Tax Act”) significantly changed the taxation of U.S.-based multinational corporations. Our compliance with the Tax Act requires the use of estimates in our financial statements and exercise of significant judgment in accounting for its provisions. The implementation of the Tax Act requires interpretations and implementing regulations by the Internal Revenue Service, as well as state tax authorities. The legislation could be subject to potential amendments and technical corrections, any of which could materially lessen or increase certain adverse impacts of the legislation. As regulations and guidance evolve with respect to the Tax Act, and as we gather information and perform more analysis, our results may differ from previous estimates and may materially affect our financial position.

We may incur significant liabilities if we fail to comply with stringent environmental laws and regulations and the ITAR, or if we did not comply with these regulations in the past. We are subject to a variety of federal, state and local government regulations related to the use, storage, discharge and disposal of toxic or other hazardous chemicals used in our manufacturing process. We are also subject to federal ITAR laws that regulate the export of technical data and export of products to other nations that may use these products for militarydefense purposes. The failure to comply with present or future regulations could result in fines, suspension of production, or a cessation of operations. Any failure on our part to control the use of, or adequately restrict the discharge of, hazardous substances, or otherwise comply with environmental regulations, could subject us to significant future liabilities. Any failure on our part to obtain any required licenses for the export of technical data and/or export of our products or to otherwise comply with ITAR, could subject us to significant future liabilities. In addition, we cannot be certain that we have not violated applicable laws or regulations in the past, which violations could result in required remediation or other liabilities. We also cannot be certain that past use or disposal of environmentally sensitive materials in conformity with then existing environmental laws and regulations will protect us from required remediation or other liabilities under current or future environmental laws or regulations.

25

We may be unable to modify our products to meet regulatory or customer requirements. From time to time our display products are subject to new domestic and international requirements, such as the European Union'sUnion’s Restriction on Hazardous Substances ("RoHS") Directive. Our customers’ terms and conditions require us to be in compliance with “all laws.” If we are unable to comply with these regulations, we may not be permitted to ship our products, which would adversely affect our revenue and ability to maintain profitability. In addition, if we are found to be in violation of laws we may be subject to fines and penalties.



11






We may be unable to successfully integrate new strategic acquisitions and investments, which could materially adversely affect our business, results of operations and financial condition. In the past we have made, and in the future we may make, acquisitions of, and investments in, businesses, products and technologies that could complement or expand our business. If we identify an acquisition candidate, we may not be able to successfully integrate the acquired businesses, products or technologies into our existing business and products. Future acquisitions could result in potentially dilutive issuances of equity securities, the incurrence of debt and contingent liabilities, amortization expenses and write-downs of acquired assets. In 2017, 2012 and 2011, we acquired 100% of the outstanding shares of NVIS, acquired 80% of the outstanding shares of eMDT Inc. and acquired 100% of the outstanding shares of FDD, respectively. If we are unable to operate NVIS, eMDT, FDD and NVISFDD profitably, our results of operations will be negatively affected. We perform periodic reviews to determine if these investments are impaired, but such reviews are difficult and rely on significant judgment about the company’s technology, ability to obtain customers, and ability to become cash flow positive and profitable. We may take future impairment charges which will have an adverse impact of on our results of operations.


Additionally, we are a party tohave several joint ventures and investments where we may have some influence, but not complete control. Accordingly, we have limited, if any, control over their governance, financial reporting and operations. As a result, we face certain operating, financial and other risks relating to these investments, including risks related to the financial strength of our joint venture partners, having differing objectives from our partners, compliance risks relating to actions of the joint venture or our partners and the risk that we will be unable to resolve disputes with the joint venture partner.investments. As a result, these investments may not contribute to our earnings or cash flows. In addition, these joint venturesinvestments may be required to raise additional capital, which may result in our ownership percentage being decreased.


Changes in China’s laws, legal protections or government policies on foreign investment in China may harm our business. Our business and corporate transactions including operations through our joint ventures, are subject to laws and regulations applicable to foreign investment in China as well as laws and regulations applicable to foreign-invested enterprises. These laws and regulations frequently change, and their interpretation and enforcement involvesinvolve uncertainties that could limit the legal protections available to us. Regulations and rules on foreign investments in China impose restrictions on the means that a foreign investor like us may apply to facilitate corporate transactions we may undertake. In addition, the Chinese legal system is based in part on government policies and internal rules, some of which are not published on a timely basis or at all, that may have a retroactive effect. As a result, we may not be aware of our violation of these policies and rules until sometime after the violation. If any of our past operations are deemed to be non-compliant with Chinese law, we may be subject to penalties and our business and operations may be adversely affected. For instance, under the catalogue for the Guidance of Foreign Investment Industries, some industries are categorized as sectors that are encouraged, restricted or prohibited for foreign investment. As the catalogue for the Guidance of Foreign Investment Industries is updated every few years, there can be no assurance that China’s government will not change its policies in a manner that would render part or all of our business to fall within the restricted or prohibited categories. If we cannot obtain approval from relevant authorities to engage in businesses that has become prohibited or restricted for foreign investors, we may be forced to sell or restructure such business. Furthermore, China’s government has broad discretion in dealing with violations of laws and regulations, including levying fines, revoking business and other licenses and requiring actions necessary for compliance. In particular, licenses and permits issued or granted to us by relevant governmental bodies may be revoked at a later time by higher regulatory bodies. If we are forced to adjust our corporate structure or business as a result of changes in government policy on foreign investment or changes in the interpretation and application of existing or new laws, our business, financial condition, results of operations and prospects may be harmed. Moreover, uncertainties in the Chinese legal system may impede our ability to enforce contracts with our business partners, customers and suppliers, or otherwise pursue claims in litigation to recover damages or loss of property, which could adversely affect our business and operations.

26

Raising additional funds by issuing securities may cause dilution to our existing stockholders or restrict our operations. To the extent that we raise additional capital by issuing equity securities, the share ownership of existing stockholders will be diluted. The terms of any financing may adversely affect the holdings or the rights of our stockholders and the issuance of additional securities, whether equity or debt, or the possibility of such issuance, may cause the market price of our shares to decline. We may sell shares or other securities in other offerings at a price per share that is less than the prices per share paid by other investors, and investors purchasing shares of our common stock or other securities in the future could have rights superior to existing stockholders. The sale of additional equity or convertible securities would dilute all of our stockholders and the terms of these securities may include liquidation or other preferences that adversely affect our existing stockholders.

We have no present intention to pay dividends on our common stock in the foreseeable future and, consequently, your only opportunity to achieve a return on your investment during that time is if the price of our common stock appreciates. We have no present intention to pay dividends on our common stock in the foreseeable future. Historically, our earnings, if any, have been retained for the development of our businesses. Any recommendation by our Board of Directors to pay dividends will depend on many factors, including our financial condition, results of operations, and other factors. Accordingly, if the price of our common stock declines in the foreseeable future, you will incur a loss on your investment, without the likelihood that this loss will be offset in part or at all by potential future cash dividends.


Our stock price may be volatile in the future. The trading price of our common stock has beenoperations are subject to wide fluctuations in response to quarter-to-quarter variations in results of operations, announcements of technological innovations or new products by us or our competitors, general conditions in the wireless communications, semiconductor and display markets, changes in earnings estimates by analysts or other events or factors. In addition, the public stock markets recently have experienced extreme price and trading volatility. This volatility has significantly affected the market prices of securities of


12






many technology companies for reasons frequently unrelated to the operating performance of the specific companies. These broad market fluctuations may adversely affect the market price of our common stock.

Politicalpolitical, legal and economic uncertainty in the European Unionrisks and natural disasters, which could adversely affect our business, results of operations, financial condition and prospects. Credit rating downgrades in certain European countries and/or speculation regarding changes to the composition or viability of the EU create uncertain global economic conditions. On June 23, 2016, the United Kingdom voted to leave the EU. The UK’s vote to voluntarily exit from the EU, generally referred to as the “Brexit,” triggered short-term financial volatility, including a decline in the value of the Great Britain Pound in comparison to both the U.S. dollar and the Euro. In addition, discussions and negotiations to determine the future terms of the UK’s relationship with the EU are ongoing, and the legal and regulatory framework that will be applicable in the UK may change. The ongoing uncertainty could have a negative economic impact and result in further volatility in the markets for several years. The impact of the Brexit referendum and such ongoing uncertainty may result in various economic and financial consequences for businesses operating in the UK, the EU and beyond. We hold significant assets in the UK and operate a UK subsidiary, and the future impacts of the Brexit and the continued uncertainty surrounding the EU could have a material impact on our business, financial condition, results of operations and cash flows.

Changes in government trade policies may increase the cost of our products, which may materially adversely affect our sales or profitability.We depend on Chinese,a Taiwanese and Korean foundriesfoundry for the manufacture of integrated circuits for our DisplayAMLCD display products and on Chinese and Korean foundries for our OLED display products. The U.S. and China have recently engaged in trade negotiations, the outcome of which remains uncertain. In 2018,recent years the U.S. proposed,has imposed, among other actions, imposing new or higher tariffs on specified imported products originating from China in response to what it characterizes as unfair trade practices, and China has responded by proposing or implementing new or higher tariffs on specified products imported from the U.S. In notices published on April 6, 2018 and June 20, 2018, the Office of the United States Trade Representative issued a determination and requests for public comment under Section 301 under the Trade Act of 1974 (the “Notices”) concerning the proposed imposition of an additional 25% tariff on specified products from China, which products comprised approximately $50.0 billion in estimated annual trade value for calendar year 2018. The list of products set forth in the Notices included diodes, integrated circuits and other products that we import from China as part of our supply chain. Tariffs on components that we import from China or other nations that have imposed, or may in the future impose, tariffs wouldhave in some case and may in the future cause our expenses to increase, which would adversely affect our profitability unless we were able to exclude our products from the tariffs or we raise prices for our products, which may result in our products becoming less attractive relative to products offered by our competitors. In addition, future actions or escalations by either the U.S. or China that affect trade relations may also affect our business or that of our suppliers or customers, and we cannot provide any assurances as to whether such actions will occur or the form that they may take. Moreover, it is uncertain to what extent, if any, the U.S. tariffs on components that we import from China will affect the Taiwanese foundries on which we depend, in part because many Taiwanese foundries conduct parts of their manufacturing in China.


A protectionist trade environment in either the U.S. or those foreign countries in which we do business, such as a change in the current tariff structures, export compliance or other trade policies, may materially adversely affect our ability to sell our products in foreign markets. To the extent that our sales or profitability are affected negatively by any such tariffs or other trade actions, our business and results of operations may be materially adversely affected.


13






Part II

As a publicly traded company, we are subject to a significant body of regulation, including the Sarbanes-Oxley Act of 2002. While we have developed and instituted a corporate compliance program based on what we believe are the current best practices in corporate governance and continue to update this program in response to newly implemented or changing regulatory requirements, we cannot provide assurance that we are or will be in compliance with all potentially applicable corporate regulations. If we fail to comply with any of these regulations, we could be subject to a range of regulatory actions, fines or other sanctions or litigation. If we must disclose any material weakness in our internal control over financial reporting, our stock price could decline.

27

Item 1B.Unresolved Staff Comments

None.

Item 2.Properties

We lease our 74,000 square foot production facility in Westborough, Massachusetts, 10,000 square feet of which is contiguous environmentally controlled production clean rooms operated between Class 10 and Class 1,000 levels. In addition to our Massachusetts facility, we lease a 3,100 square foot facility in Santa Clara, California which houses our OLED design team and ASIC development. We also have a lease in Tokyo, Japan.

NVIS, our subsidiary in Reston, Virginia, leases 6,100 square feet in Reston. FDD, our subsidiary in Scotland, leases 20,000 square feet in Dalgety Bay, 5,000 square feet of which is contiguous environmentally controlled production clean rooms operated between Class 10 and Class 10,000 levels. FDD also leases an office in Berlin, Germany.

At this time, we believe these properties are suitable for our needs for the foreseeable future.

Item 3.Legal Proceedings

The Company may engage in legal proceedings arising in the ordinary course of business. Claims, suits, investigations and proceedings are inherently uncertain and it is not possible to predict the ultimate outcome of such matters and our business, financial condition, results of operations or cash flows could be affected in any particular period.

BlueRadios, Inc. v. Kopin Corporation, Civil Action No. 16-02052-JLK (D. Col.):

On August 12, 2016, BlueRadios, Inc. (“BlueRadios”) filed a complaint in the U.S. District Court for the District of Colorado, alleging that the Company breached a contract between it and BlueRadios concerning an alleged joint venture between the Company and BlueRadios to design, develop and commercialize micro-display products with embedded wireless technology referred to as “Golden-i”, breached the covenant of good faith and fair dealing associated with that contract, breached its fiduciary duty to BlueRadios, and misappropriated trade secrets owned by BlueRadios in violation of Colorado law (C.R.S. § 7-74-104(4)) and the Defend Trade Secrets Act (18 U.S.C. § 1836(b)(1)). BlueRadios further alleges that the Company was unjustly enriched by its alleged misconduct, BlueRadios is entitled to an accounting to determine the amount of profits obtained by the Company as a result of its alleged misconduct, and the inventorship on at least ten patents or patent applications owned by the Company need to be corrected to list BlueRadios’ employees as inventors and thereby list BlueRadios as co-assignees of the patents. BlueRadios seeks monetary, declaratory, and injunctive relief, including for alleged non-payment of engineering retainer fees.

On October 11, 2016, the Company filed its Answer and Affirmative Defenses. The parties completed expert depositions on November 15, 2019. On December 2, 2019, the Company filed a Motion for Partial Summary Judgment requesting the Court dismiss counts 2-7 in their entirety and counts 1 and 8 in part. BlueRadios also filed a Motion for Partial Summary Judgment alleging it is the co-owner of U.S. Patent No. 8,909,296. Responses to the Motions for Partial Summary Judgment were filed on January 15, 2020, and replies were filed on February 19, 2020. On September 25, 2020, the Court denied BlueRadios’ Motion for Partial Summary Judgment. A trial date has not yet been set by the Court. The Company has not concluded a loss from this matter is probable; therefore, we have not recorded an accrual for litigation or claims related to this matter for the period ended December 25, 2021. The Company will continue to evaluate information as it becomes known and will record an estimate for losses at the time or times when it is both probable that a loss has been incurred and the amount of the loss is reasonably estimable.

Item 4.Mine Safety Disclosures

Not applicable.

28

Part II

Item 5.Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Our common stock is traded on the Nasdaq Capital Market under the symbol “KOPN”.

As of March 1, 2021, there were approximately 320 stockholders of record of our common stock, which does not reflect those shares held beneficially or those shares held in “street” name.

We have not paid cash dividends in the past, nor do we expect to pay cash dividends for the foreseeable future. We anticipate that earnings, if any, will be retained for the development of our businesses.

Equity Compensation Plan Information

The following table sets forth information as of December 25, 2021 about shares of the Company’s common stock issuable upon exercise of outstanding options, warrants and rights and available for issuance under our existing equity compensation plans.

Plan Category Number of securities to be issued upon exercise of outstanding options,
warrants and rights (a)
  Weighted-average exercise price of outstanding options, warrants and rights (b)  Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column
(a) (b)
 
Equity compensation plans approved by security holders  2,077,592  $2.78   1,795,311(1)
Equity compensation plans not approved by security holders    $    

(1) Amount includes shares available under the 2020 Equity Incentive Plan.

29

Company Stock Performance

The following graph shows a five-year comparison of cumulative total shareholder return for the Company, the Nasdaq US Benchmark TR Index and the S&P 500 Information Technology index. The graph assumes $100 was invested in each of the Company’s common stock, the Nasdaq US Benchmark TR Index and the S&P 500 Information Technology index on December 31, 2016. Data points on the graph are annual. Note that historical price performance is not necessarily indicative of future performance.

30

Item 6.
Selected Financial Data (As Revised)(1)
Reserved
This information should be read in conjunction with our consolidated financial statements and notes thereto, and our “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7 of this Form 10-K/A.
 Fiscal Year Ended
(in thousands, except per share data)
2018 (2)
 2017 2016 2015 2014
Statement of Operations Data:         
Total revenues$24,465
 $27,841
 $22,643
 $32,054
 $31,808
Loss from operations(39,967) (30,298) (20,473) (25,237) (28,429)
Total non-operating income (expense), net5,514
 1,955
 571
 10,416
 (36)
Tax benefit (provision)(30) 2,963
 (3,130) 25
 180
Net loss(34,482) (25,380) (23,031) (14,843) (28,671)
Net loss attributable to the controlling interest(34,534) (25,240) (23,569) (14,693) (28,212)
Basic and diluted loss per share attributable to Kopin Corporation common stockholders$(0.47) $(0.36) $(0.37) $(0.23) $(0.45)
Weighted average basic and diluted common shares outstanding73,157
 69,915
 64,046
 63,466
 62,639
 Fiscal Year Ended
(in thousands)
2018 (2)
 2017 2016 2015 2014
Balance Sheet Data:         
Cash and cash equivalents and marketable debt securities$37,244
 $68,756
 $77,198
 $80,711
 $90,859
Working capital39,037
 67,636
 70,028
 89,879
 86,682
Total assets59,549
 91,322
 87,832
 106,060
 122,941
Long-term obligations1,469
 1,839
 247
 298
 311
Total stockholders’ equity$47,862
 $77,380
 $72,742
 $93,539
 $109,847

(1)For discussion of the correcting adjustments, see Note 18 - Correction of Previously Issued Financial Statements.
(2)Effective December 31, 2017, the first day of fiscal year 2018, the Company adopted Accounting Standards Update No. 2014-09, Revenue from Contracts with Customers (Topic 606) on a modified retrospective basis. As a result of the adoption of this standard, Total revenues, Loss from operations and Total stockholders' equity for fiscal year 2018 in the preceding tables may not be directly comparable to those of prior years. For additional information, refer to Note 1. of the “Notes to Consolidated Financial Statements.”


14






Item 7.Management’s Discussion and Analysis of Financial Condition and Results of Operations (As Revised)

Overview

The following discussion should be read in conjunction with our consolidated financial statements and notes to those statements and other financial information appearing elsewhere in this Form 10-K/A.10-K. The following discussion contains forward-looking statements. Our actual results could differ materially from those anticipated in the forward-looking statements as a result of a number of factors, including the risks discussed in Item 1A “Risk Factors,” and elsewhere in this Form 10-K/A.10-K. Please refer to our cautionary note on Forward LookingForward-Looking Statements on page 3 of this Form 10-K/A.

Management's10-K.

We are a leading developer, manufacturer and seller of miniature displays and optical lenses (our “components”) for sale as individual displays, components, modules or higher-level subassemblies. We also license our intellectual property through technology license agreements. Our component products are used in highly demanding high-resolution portable defense, enterprise and consumer electronic applications, training and simulation equipment and 3D metrology equipment. Our products enable our customers to develop and market an improved generation of products for these target applications.

Critical Accounting Estimates

Management’s discussion and analysis of our financial condition and results of operations are based upon our audited consolidated financial statements. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amount of assets, liabilities, revenues and expenses and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates, including those related to revenue recognition under the percentage-of-completioncost-to-cost measurement method, bad debts, inventories, warranty reserves, investment valuations, valuation of stock compensation awards, recoverability of deferred tax assets, liabilities for uncertain tax positions and contingencies. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for judgments about carrying values of assets and liabilities that are not apparent from other sources. Actual results may differ from these estimates under different assumptions.

We adopted the Financial Accounting Standards Board’s ("FASB") Accounting Standards Update ("ASU") No. 2014-09, Revenue from Contracts with Customers (Topic 606)

 effective December 31, 2017 (the first day of our fiscal year 2018) and applied the modified retrospective method. Our results for reporting periods beginning after December 31, 2017 are presented under ASC 606, while prior period amounts are not adjusted and continue to be reported in accordance with our historic accounting policies ASC 605.

We believe the following critical accounting policies are most affected by our more significant judgments and estimates used in the preparation of our consolidated financial statements:

Revenue Recognition

Substantially all of our product revenues are either derived from the sales of componentsmicrodisplays, which are sold as individual displays, modules that include electronics and optics, or higher-level subassemblies for use in military applications or our wearable technology components that can be integrated to createdefense, industrial and consumer headset systems.near-eye applications such as avionic helmets, thermal weapon sights or virtual reality headsets. We also have development contracts for the design, manufacture and modification of products for the U.S. government or a prime contractor for the U.S. government or for a customer that sells into the industrial or consumer markets. The Company'sCompany’s contracts with the U.S. government are typically subject to the Federal Acquisition Regulations ("FAR"(“FAR”) and are priced based on estimated or actual costs of producing goods. The FAR provides guidance on the types of costs that are allowable in establishing prices for goods provided under U.S. government contracts. The pricing for non-U.S. government contracts is based on the specific negotiations with each customer.

Our fixed-price contracts with the U.S. government or other customers may result in revenue recognized in excess of amounts currently billed. We disclose the excess of revenues over amounts actually billed as Contract assets and unbilled receivables on the balance sheet. Amounts billed and due from our customers are classified as Accounts receivable on the balance sheets. In some instances, the U.S.U.7S. government retains a small portion of the contract price until completion of the contract. The portion of the payments retained until final contract settlement is not considered a significant financing component because the intent is to protect the customer. For contracts with the U.S. government, we typically receive interim payments either as work progresses or by achieving certain milestones or based on a schedule in the contract. We recognize a liability for these advance payments in excess of revenue recognized and present it as Contract liabilities and billings in excess of revenue earned on the balance sheets. The advanced payment typically is not considered a significant financing component because it is used to meet working capital demands that can be higher in the early stages of a contract and to protect us from the other party failing to adequately complete some or all of its obligations under the contract. For industrial and consumer purchase orders, we typically receive payments within 30 to 60 days of shipments of the product, although for some purchase orders, we may require an advanced payment prior to shipment of the product.

31

To determine the proper revenue recognition method for contracts with the same customer, we evaluate whether two or more contracts should be combined and accounted for as one single contract and whether the combined or single contract should be accounted for as more than one performance obligation. For most of our development contracts and contracts with the U.S. government, the customer contracts with us to provide a significant service of integrating a set of components into a single unit. Hence, the entire contract is accounted for as one performance obligation. Less frequently, however, we may promise to provide distinct goods or services within a contract in which case we separate the contract into more than one performance obligation. If a contract is separated into more than one performance obligation, we allocate the total transaction


15






price to each performance obligation in an amount based on the estimated relative standalone selling prices of the promised goods or services underlying each performance obligation. In cases where we sell standard products, the observable standalone sales are used to determine the standalone selling price.

The Company recognizes revenue from a contract when it has approval and commitment from both parties, the rights of the parties are identified, payment terms are identified, the contract has commercial substance and collectability of consideration is probable.

Commencing in 2018 for

For certain contracts with the U.S. government, the Company recognizes revenue over time as we deliver goods or perform services because of continuous transfer of control to the customer and the lack of an alternative use for the product. The continuous transfer of control to the customer is supported bysubject to liability clauses in the contract that allow the U.S. government to unilaterally terminate the contract for convenience, pay us for costs incurred plus a reasonable profit and take control of any work in process. For contracts with commercial customers, while the contract may have a similar liability clause, our products historically have an alternative use and thus, revenue is recognized at a point in time.

In situations where control transfers over time, revenue is recognized based on the extent of progress towards completion of the performance obligation. We generally use the cost-to-cost approach to measure the extent of progress towards completion of the performance obligation for our contracts because we believe it best depicts the transfer of assets to the customer. Under the cost-to-cost measure approach, the extent of progress towards completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligation. Revenues are recorded proportionally as costs are incurred.

Accounting for design, development and production contracts requires judgment relative to assessing risks, estimating contract revenues and costs and making assumptions for schedule and technical issues. Due to the size and nature of the work required to be performed on many of our contracts, the estimation of total revenue and cost at completion is complicated and subject to many variables. Contract costs include material, labor and subcontracting costs, as well as an allocation of indirect costs. We have to make assumptions regarding the number of labor hours required to complete a task, the complexity of the work to be performed, the availability and cost of materials and performance by our subcontractors. For contract change orders, claims or similar items, we apply judgment in estimating the amounts and assessing the potential for realization. These amounts are only included in contract value when they can be reliably estimated and realization is considered probable. If our estimate of total contract costs or our determination of whether the customer agrees that a milestone is achievedachievement is incorrect, our revenue could be overstated or understated and the profits or loss reported could be subject to adjustment.

32

For our commercial customers, the Company'sCompany’s revenue is recognized when obligations under the terms of a contract with our customer isare satisfied and the Company transfers control of the products or performs services, which is generally upon delivery of the product to the customer.customer or performance of the services. Revenue is recorded as the amount of consideration we expect to receive in exchange for transferring goods or providing services. Provisions for product returns and allowances are reductions in the transaction price and are recorded in the same period as the related revenues. We analyze historical returns, current economic trends and changes in customer demand when evaluating the adequacy of sales returns and other allowances. Certain product sales are made to distributors under agreements allowing for a limited right of return on unsold products. Sales to distributors are primarily made for sales to the distributors'distributors’ customers and not for stocking of inventory. Sales, value add and other taxes we collect concurrent with revenue-producing activities are excluded from revenue.

The rights and benefits to the Company'sCompany also licenses its intellectual property are conveyed to certain customers(“IP”) through technology license agreements.agreements which provides the customer the right to use our IP as it exists at a point in time. These agreements may include other performance obligations including the sale of product to the customer. The satisfaction of the Company’s performance obligation, and related recognition of revenue, occurs when the IP is delivered to the customer, the license period has begun and there are no additional performance obligations in the agreement. When the license is distinct from other obligations in the agreement, the Company treats the license and other performance obligations as separate performance obligations. Accordingly, the license is recognized at a point in time or over time based on the standalone selling price. The sale of materials is recognized at a point in time, which occurs withUnder certain license agreements, we may receive royalties based on the transfer of controlsales of the Company's productslicensed product. We recognize royalty revenue upon the later of when the related sales occur, or services. In certain instances,when the Company is entitledperformance obligation to sales-based royalties under license agreements. These sales-based royalties are recognized when they are earned. Revenues from sales-based royalties underwhich some or all of the royalty has been allocated has been satisfied (or partially satisfied). Under our current license agreements are shown under Research and development and other revenues onfor which a royalty exists, we have recorded revenue when the Company's Consolidated Statementsrelated sales by our customer occurs because the performance obligation related to the delivery of Operations.


16






the license to the customer has been satisfied.

Inventory

We provide a reserve for estimated obsolete or unmarketable inventory based on assumptions about future demand and market conditions and our production plans. Inventories that are obsolete or slow moving are generally fully reserved (representing the estimated net realizable value) as such information becomes available. Our display products are manufactured based upon production plans whose critical assumptions include non-binding demand forecasts provided by our customers, lead times for raw materials, lead times for wafer foundries to perform circuit processing and yields. If a customer were to cancel an order or actual demand was lower than forecasted demand, we may not be able to sell the excess display inventory and additional reserves would be required. If we were unable to sell the excess inventory, we would establish reserves to reduce the inventory to its estimated realizable value (generally zero).

Investment Valuation

We periodically make equity investments in private companies, accounted for as an equity investment, whose values are difficult to determine. The Company adopted ASU No. 2016-01, Financial Instruments - Overall (Subtopic 825-10): Recognition and Measurement of Financial Assets and Liabilities and the related amendments on December 31, 2017. This update amends various aspects of the recognition, measurement, presentation, and disclosure of financial instruments. The Company adopted the measurement alternative for equity investments without readily determinable fair values (often referred to as cost method investments) on a prospective basis. When assessing investments in private companies for impairment, we consider such factors as, among others, the share price from the investee'sinvestee’s latest financing round, the performance of the investee in relation to its own operating targets and its business plan, the investee'sinvestee’s revenue and cost trends, the liquidity and cash position, including its cash burn rate and market acceptance of the investee'sinvestee’s products and services. Because these are private companies which we do not control we may not be able to obtain all of the information we would want in order to make a complete assessment of the investment on a timely basis. Accordingly, our estimates may be revised if other information becomes available at a later date.

In addition to the above, we make investments in government and agency-backed securities and corporate debt securities. For all of our investments we provide for an impairment valuation if we believe a decline in the value of an investment is other-than-temporary, which may have an adverse impact on our results of operations. The determination of whether a decline in value is other-than-temporary requires that we estimate the cash flows we expect to receive from the security. We use publicly available information such as credit ratings and financial information of the entity that issued the security in the development of our expectation of the cash flows to be received. Historically, we have periodically recorded other than temporaryother-than-temporary impairment losses, however we have not done so recently.

33

Income Taxes

We have historically incurred domestic operating losses from both a financial reporting and tax return standpoint. We establish valuation allowances ifto the extent it appears more likely than not that our deferred tax assets will not be realized. These judgments are based on our projections of taxable income and the amount and timing of our tax operating loss carryforwards and other deferred tax assets. Given our federal operating tax loss carryforwards, we do not expect to pay domestic federal taxes in the near term. It is possible that we could pay foreign and state income taxes. We are also subject to foreign taxes from our Korean and U.K. subsidiary operations.

Our income tax provision is based on calculations and assumptions that will be subject to examination by tax authorities. Despite our history of operating losses there can be exposures for state taxes, federal alternative minimum taxes or foreign tax that may be due. We regularly assess the potential outcomes of these examinations and any future examinations for the current or prior years in determining the adequacy of our provision for income taxes. Should the actual results differ from our estimates, we would have to adjust the income tax provision in the period in which the facts that give rise to the revision become known. Such adjustment could have a material impact on our results of operations. We have historically established valuation allowances against all of our net deferred tax assets because of our history of generating operating losses and restrictions on the use of certain items. Our evaluation of the recoverability of deferred tax assets has also included analysis of the expiration dates of net operating loss carryforwards. In forming our conclusions as to whether the deferred tax assets are more likely than not to be realized we consider the sources of our income and the projected stability of those sources and product life cycles.

On December 22, 2017, the President signed the Tax Cuts and Jobs Act of 2017 (2017 Act) which enacted a wide range of changes to the U.S. corporate income tax system. The 2017 Act reduced the U.S. corporate statutory federal tax rate to 21% effective in 2018, eliminated the domestic manufacturing deduction benefit and introduced other tax base broadening measures, changed rules for expensing and capitalizing business expenditures, established a territorial tax system for foreign earnings as well as a minimum tax on certain foreign earnings, provided for a one-time transition tax on previously

17






undistributed foreign earnings, and introduced new rules for the treatment of certain foreign income. Also on December 22, 2017, the SEC issued Staff Accounting Bulletin No. 118 ("SAB 118"), which provided companies with additional guidance on how to account for the 2017 Act in their financial statements, allowing companies to use a measurement period. As of December 30, 2017, we made a reasonable estimate of the effects on our existing deferred tax balances and the one-time transition tax on previously undistributed foreign earnings and the Company did not recognize any provisional amounts in the (benefit) provision for income taxes in accordance with SAB 118. As of December 29, 2018, we had finalized our provisional estimates for the remeasurement of our existing U.S. deferred tax balances and the one-time transition tax and did not recognize amounts in the (benefit) provision for income taxes. Please see the “Notes to Consolidated Financial Statements” for additional information.
Goodwill
We account for goodwill in accordance with ASC Topic 350. Under ASC Topic 350, goodwill is considered to have an indefinite life, and is carried at cost. Goodwill is not amortized, but is subject to an annual impairment test, as well as between annual tests when events or circumstances indicate that the carrying value may not be recoverable.

The determination of reporting units under ASC 350 begins with the definition of an operating segment in ASC 280 and takes into account the disaggregation of that operating segment into economically dissimilar components for goodwill impairment testing purposes. The level at which operating performance is reviewed also differs between ASC 280 and ASC 350. The chief operating decision maker ("CODM") is the Company's Chief Executive Officer who reviews operating segments and the segment manager reviews reporting units (components of operating segments). Therefore, a component of an operating segment would not be considered an operating segment under ASC 280 unless the CODM regularly reviews its operating performance. However, that same component might be a reporting unit under ASC 350 if a segment manager regularly reviews its operating performance (and if the other reporting unit criteria are met). Goodwill is evaluated for impairment annually or more often if indicators of a potential impairment are present. The Company performs impairment tests of goodwill at its reporting unit level. The goodwill valuations that are utilized to test these assets for impairment are depending on a number of significant estimates and assumptions, including macroeconomic conditions, overall growth rates, competitive activities, cost containment, Company business plans and the discount rate applied to cash flows. We believe these estimates and assumptions are reasonable and are comparable to those that would be used by other market participants. However, actual events and results could differ substantially from those used in our valuations. To the extent such factors result in a failure to achieve the level of projected cash flows initially used to estimate fair value for purposes of establishing the carrying amount of goodwill and intangibles, we may need to record non-cash impairment charges in the future.  

Results of Operations
We are a leading developer, manufacturer and seller of miniature displays, optical lenses, ASICs (our “components”) for sale as individual components or in headsets we design and sell or license. Our component products are used in highly demanding high-resolution portable military, enterprise and consumer electronic applications, training and simulation equipment and 3D metrology equipment. Our products enable our customers to develop and market an improved generation of products for these target applications.

We have two principal sources of revenues: product revenues and research and development (“R&D”) revenues. Research and developmentR&D revenues consist primarily of development contracts with agencies or prime contractors of the U.S. government and commercial enterprises.

We manufacture transmissive microdisplays and reflective microdisplays. Our commercial and militarydefense transmissive display production is being performed entirely in our Westborough, Massachusetts facility. FDD, our wholly-owned subsidiary, manufactures our reflective microdisplays in its facility located in Scotland and it is a reportable segment. In 2017, we introduced Organic Light Emitting Diode (“OLED”)Scotland. Our OLED displays which are designed by us and manufactured by third parties for us.

We are in the initial production phase as thea display supplier for the U.S. Army’s Family of Weapon Sights (“FWS”) - Individual program and Joint Strike Fighter F-35 programs and are undergoing qualification for the FWS - Crew Served variant. We are also in development for a new series of displays for armored vehicles under the M1A2 program. The FWS, M1A2 and our existing production avionic programs are expected to increase production for the next several years. There are other firms offering products which compete against us in the militarydefense programs and all of the programs we supply product to are subject to the U.S. government militarydefense budget and procurement process. Accordingly, there can be no assurances we will continue to ship under our militarydefense contracts.

34

18






Sales of our products to customers that use our products for Consumer Applications is a critical part of our strategy to increase revenues and return to profitability and positive cash flow. Our success in selling our products for Consumer Applications will depend on the demand for our customers’ new products, which we are unable to predict.

We offer microdisplays and optical lenses ASICs, backlights, and Whisper™ audio chips for use in consumer, enterprise and public safety products and systems which are targeted at augmentedAR and virtual realityVR markets, among other areas. We refer to the sale of microdisplays and optical lenses ASICs, backlights, and Whisper™ audio chips as our component sales. We also offer head mounted, voice and gesture controlled, hands-free headset system designs that include our components and software for consumer and enterprise applications. The software technology includes but

Predicting our R&D revenue and related trends is notchallenging because we have limited ability to voice and gesture control, noise cancellation, and operating systems. We refer to our components and system designs as Kopin Wearable technologies. Our strategy is to sell the components individually or license the headset system designs and sell the various components includedforecast if we will be awarded additional R&D contracts in the reference designfuture as part of a supply agreement. Some ofsuch awards depend on the technologies includedU.S. military budget and priorities. We cannot assure that the R&D contracts will result in workable products or if successful our concept systems are components and software thatproducts developed under these contracts will be procured by our customers. If we license from other companies. We believedo not continue to win R&D contracts or if there is no demand for the products developed under these contracts, our ability to developachieve profitability and expand Kopin Wearable technologies and to market and license our concept systems and components will be critical for us to achieve revenue growth, positive cash flow could be negatively affected because the R&D revenues (or the products derived from the R&D contracts) would not be available to cover the allocated overhead and profitability. The markets Kopin Wearable technologies can alreadyselling, general and administrative costs which may remain. Some of our contracts are fixed priced and we may incur cost overruns that would result in losses on the contracts. If we incur such losses on our contracts our ability to achieve profitability and positive cash flow could be used in have a number of existing product offerings such as ruggedized laptop computers and tablets and virtual reality headsets offered by companies such as Samsung, Sony and Oculus. The companies that offer these products are significantly larger than we are.

negatively affected.

Because our fiscal year ends on the last Saturday of December, every seven years we have a fiscal year with 53 weeks. Our fiscal year 2018 was ayears 2021, 2020 and 2019 were each 52 week year, 2017 was a 52 week year and 2016 was a 53 week year. The impact of the 53years.rd

 week in 2016 fiscal year was not material to the Company's results of operations.

Revenues.Our revenues by display application, which include product sales and amounts earned from research and development contracts, for fiscal years 2018, 20172021, 2020 and 20162019 by category, were as follows:

(In thousands)2018 2017 2016
Military$8,724
 $13,438
 $5,338
Industrial6,066
 5,478
 6,296
Consumer4,146
 4,406
 7,418
Research and Development5,254
 2,947
 1,527
Other275
 1,573
 2,064
Total Revenues$24,465
 $27,841
 $22,643

(In thousands) 2021  2020  2019 
Defense $18,180  $20,231  $8,729 
Industrial/Enterprise  9,710   6,882   9,717 
Consumer  1,871   852   1,777 
Research and Development  14,669   10,123   4,983 
Other  121   553   61 
License and royalties  1,115   1,487   4,252 
Total Revenues $45,666  $40,128  $29,519 

Fiscal Year 20182021 Compared to Fiscal Year 2017

2020

Sales of our products for MilitaryDefense applications include systems used by the military both in the field and for training and simulation. Sales of our products for MilitaryDefense applications may be for a one-time purchase order or for programs that run for several years. The decreaseRevenues from product sales to defense customers decreased in sales of products for Military applications in 20182021 compared to 2017 was2020, primarily due to a decrease in shipments of our products into the completion of military programs at our subsidiary NVIS in 2017.

IndustrialJoint Strike Fighter program and training and simulation programs.

Industrial/Enterprise applications revenues represent customers who purchase our display products for use in headsets used for applications in manufacturing, distribution, public safety, 3D metrology equipment and other industrial applications. Our 3D metrology customers are primarily located in Asia and they sell to Asian contract manufacturers who use the 3D metrology machines for quality control purposes. The increase in IndustrialIndustrial/Enterprise applications revenues in 20182021 compared to 20172020 was primarily due to an increase in sales to customers who use our display components in 3D metrology equipment and industrial headsets.

Sales of our displays for Consumer applications is primarily for the use in thermal imaging products, recreational rifle and hand-held scopes and drone racing headsets.scopes. The decreaseincrease in Consumer applications in 20182021 compared to 20172020 was primarily due to decreasedincreased demand for our organic light emitting displays and components used in thermal imaging products and drone racing headsets.

Research & Development ("(“OLEDS”).

R&D")&D revenues increased in 20182021 as compared to 20172020 primarily due to additional funding for new display technology development which we believe will be used in U.S. militarydefense programs.

Historically, we have recognized These contracts typically reimburse us for direct costs and allocated overhead and selling, general and administrative costs and in some cases profit. In 2021 and 2020 our R&D revenues exceeded funded R&D expenses by approximately $4.7 million and $2.4 million, respectively.

The decrease in license and royalty revenue in the period when we have shipped units of products. For the fiscal year 2018, we adopted Topic 606 and certain revenues are being recorded on the percentage of completion method using a cost-to-cost approach. Prior2021 compared to the adoption of Topic 606, we believe we would have recorded approximately $4.1 million as revenue in 2018 and future years, however, with our adoption of Topic 606 the approximately $4.1 million was recognized as part of the cumulative effect of initially applying the new revenue standard as an adjustment2020 is due to the opening balance of retained earnings. The comparative information has not been revised and continues to be reportedlower royalties earned under the accounting standards in effectIP license agreements for


19






those periods. The Company expects the impact of the adoption of the new standard to be material to the Company's revenues on an ongoing basis.
industrial wearable headsets.

International product sales represented approximately 41%38% and 20% of product revenues for 20182021 and 2017,2020, respectively. Our international sales increased in 2021 as compared to 2020 due to an increase in sales of our products for 3D metrology application by our subsidiary, Forth Dimension Display, located in Scotland. Our international sales are primarily denominated in U.S. currency.dollars. Consequently, a strengthening of the U.S. dollar could increase the price in local currencies of our products in foreign markets and make our products relatively more expensive than competitors'competitors’ products that are denominated in local currencies, which could result in a reduction in sales or profitability in those foreign markets. As a result, our financial position and results of operations are subject to exchange rate fluctuation in transactional and functional currency. We have not taken any protective measures against exchange rate fluctuations, such as purchasing hedging instruments with respect to such fluctuations, because of the historically stable exchange rate between the Japanese yen, Great Britain pound and the U.S. dollar. Foreign currency translation impact on our results, if material, is described in further detail under "Item“Item 7A. Quantitative and Qualitative Disclosures About Market Risk"Risk” section below.

35

Fiscal Year 20172020 Compared to Fiscal Year 2016

The2019

Sales of our products for Defense applications include systems used by the military both in the field and for training and simulation. Sales of our products for Defense applications may be for a one-time purchase order or for programs that run for several years. Product sales to defense customers increased in 2020 compared to 2019 due to an increase in Military Applicationshipments of our products into the Family of Weapon Sights Individual (FWS-I) program and the Joint Strike Fighter program. FWS-I and Joint Strike Fighter revenues increased in 2017 as compared to 2016 is primarily due to incremental revenue from NVIS,2020 over 2019 by 167% and 139%, respectively.

Industrial/Enterprise applications revenues represent customers who produces virtual reality systemspurchase our display products for professionaluse in headsets used for manufacturing, distribution, public safety, 3D applications. Revenues from NVIS were approximately $9.1 million, of which $8.8 million is included in Military Applications.

Revenues from NVIS of approximately $0.3 million are included in the Industrialmetrology equipment and other industrial applications. Our 3D metrology customers are primarily located in Asia and Chinesethey sell to Asian contract manufacturers represent a significant market forwho use the 3D metrology equipment. Accordingly, sales of 3D metrology equipment are tied to the strength of the Chinese manufacturing sector.
machines for quality control purposes. The decrease in Consumer ApplicationsIndustrial/Enterprise applications revenues in 2017 as2020 compared to 2016 is2019 was primarily because ofdue to a decrease in sales to customers who use our display components in industrial headsets, 3D metrology and safety applications.

Sales of our displays for Consumer applications are primarily for the use in thermal imaging products, recreational rifle and hand-held scopes and drone racing headsets. The decrease in Consumer applications in 2020 compared to 2019 was primarily due to decreased demand for displays and components used in drone headset applications and a health and fitness application.

Research & Development ("racing headsets.

R&D")&D revenues increased in 20172020 as compared to 20162019 primarily due to fundingthe completion of performance obligations on funded U.S. defense programs partially offset by lower revenues from OLED development contracts. R&D revenues primarily increased in 2020 over 2019 because we were awarded and commenced work on new contracts to develop technologies we believe will be used in U.S. defense programs. These contracts typically reimburse us for U.S. military programs includingdirect costs and allocated overhead and selling, general and administrative costs and in some cases profit. In 2020 and 2019 our R&D revenues exceeded funded R&D expenses by approximately $2.4 million and $0.8 million, respectively, and this increase aided our improved operating results in 2020 as compared to 2019.

The decrease in license and royalty revenue in 2020 compared to 2019 is due to the Familyone-time license of Weapon Sights ("FWS") program.

IP to RealWear for $3.5 million in 2019 partially offset by royalties earned under IP license agreements.

International sales represented 41%approximately 20% and 59%44% of product revenues for fiscal years 20172020 and 2016,2019, respectively. Our international sales are primarily denominated in U.S. dollars. Consequently, a strengthening of the U.S. dollar could increase the price in local currencies of our products in foreign markets and make our products relatively more expensive than competitors’ products that are denominated in local currencies, which could result in a reduction in sales or profitability in those foreign markets. As a result, our financial position and results of operations are subject to exchange rate fluctuation in transactional and functional currency. We have not taken any protective measures against exchange rate fluctuations, such as purchasing hedging instruments with respect to such fluctuations, because of the historically stable exchange rate between the Japanese yen, Great Britain pound and the U.S. dollar. Foreign currency translation impact on our results, if material, is described in further detail under “Item 7A. Quantitative and Qualitative Disclosures About Market Risk” section below.

36

Cost of Product Revenues. Cost of product revenues, which is comprised of materials, labor and manufacturing overhead related to the production of our products for fiscal years 2018, 20172021, 2020 and 20162019 were as follows:

(In thousands, except percentages)2018 2017 2016
Cost of product revenues$15,831
 $18,118
 $17,814
Cost of product revenues as a % of net product revenues82.4% 72.8% 84.4%

(In thousands, except percentages) 2021  2020  2019 
Cost of product revenue $25,052  $21,398  $20,902 
Cost of product revenues as a % of net product revenues  83.8%  75.0%  103.0%

Fiscal Year 20182021 Compared to Fiscal Year 2017

2020

Cost of product revenues increased as a percentage of revenues in 20182021 as compared to 2017 because2020 primarily due to lower production volumes in the second and third quarter of a decline in salesfiscal year 2021, which resulted from reduced production of our militaryFWS-I products as we made some process changes in manufacturing the products.

There is currently a global shortage of semiconductor circuit chips and other raw materials. The shortage did not have a material impact on our results of operations for the fiscal year 2021. For fiscal year 2022 we have identified a shortage of several semiconductor components from our normal vendors which have higher gross margins thanare necessary to manufacture our products. We continue to search for and procure all necessary components from our current vendors and new alternative vendors. In certain situations, we are able to obtain the average gross margincomponents but had a significantly increased cost. The inability to procure a single component will prevent the completion of our otherproduct and the ability to sell the product. Our products sold during the same period in 2017.

go through extensive qualification processes and therefore our customers may not accept a replacement component. We are unable to determine if we will be able to obtain all necessary components for fiscal 2022. If we are unable to obtain all necessary components, we may be required to stop production which would negatively affect our cash flow and results of operations.

Fiscal Year 20172020 Compared to Fiscal Year 2016

2019

Cost of product revenues decreased as a percentage of revenues in 20172020 as compared to 20162019 primarily due to improved yields from our manufacturing process. Improved yields result in lower material cost per unit because of an increase in sales of our military products which have higher gross margins thanwe are scrapping less material to produce a unit. In addition, the other products sold duringlabor cost per unit declined as employees are not reworking or performing the same periodmanufacturing process multiple times to create a finished product. Also, fixed overhead costs per unit decline because we are producing more units in 2016.

the manufacturing facility but the cost to run the manufacturing facility does not significantly increase. We were able to improve yields because we have more experience manufacturing our two primary defense products and we are learning ways to improve our processes. In addition, we are working with our subcontractors to improve the quality and lower the cost of the raw materials we acquire.

Research and Development. R&D expenses are incurred in support of internal display development programs or programs funded by agencies or prime contractors of the U.S. government and commercial partners. R&D costs include staffing, purchases of materials and laboratory supplies, circuit design costs, fabrication and packaging of display products and allocated overhead. In fiscal year 2019, we expect2021, our R&D expenditures to bewere primarily related to our display products and militarydefense systems. R&D expenses for fiscal years 2018, 20172021, 2020 and 20162019 were as follows:

(In thousands)2018 2017 2016
Funded$4,892
 $3,365
 $787
Internal12,553
 15,415
 15,253
Total$17,445
 $18,780
 $16,040

20






(In thousands) 2021  2020  2019 
Funded $9,976  $7,746  $4,216 
Internal  6,312   3,924   9,133 
Total $16,288  $11,670  $13,349 

Fiscal Year 20182021 Compared to Fiscal Year 2017

2020

Funded R&D expense for 20182021 increased as compared to 2020 primarily due to an increase in the number of defense related contracts we have been awarded. Internal R&D expense for 2021 increased as compared to the prior year primarily due to increase OLED development.

37

Fiscal Year 2020 Compared to Fiscal Year 2019

Funded R&D expense for 2020 increased as compared to 2019 primarily due to an increase in spending for military programs.the number of defense related contracts we have been awarded. Internal R&D expense for 20182020 decreased as compared to the prior year primarily due to the licensing of certain products moving into the commercialization phase.and other development programs being curtailed. We expect to incur significant development costs in fiscal year 20192021 to develop OLED display products and develop militarydefense products.

Fiscal Year 2017 Compared to Fiscal Year 2016
Funded R&D expense for 2017 increased as compared to the prior year due to an increase in spending for military programs. Internal R&D expense for 2017 remained relatively consistent as compared to prior year.

Selling, General and Administrative. Selling, general and administrative ("(“S,G&A"&A”) expenses consist of the expenses incurred by our sales and marketing personnel and related expenses, and administrative and general corporate expenses. S,G SG&A expenses for the fiscal years 2018, 20172021, 2020 and 20162019 were as follows:

(In thousands, except percentages)2018 2017 2016
Selling, general and administrative expense$27,211
 $20,541
 $16,962
Selling, general and administrative expense as a % of total revenue111.2% 73.8% 74.9%

(In thousands, except percentages) 2021  2020  2019 
Selling, general and administrative expense $18,101  $11,823  $21,316 
Selling, general and administrative expense as a % of total revenue  39.6%  29.5%  72.2%

Fiscal Year 20182021 Compared to Fiscal Year 2017

2020

S,G&A for 20182021 increased as compared to the prior year2020 primarily due to an increase in compensation expenses including increases of $2.6approximately $3.1 million in non-cash stock-based compensation, $1.3$1.4 million in compensation and benefits, $0.3 million in insurance and $0.9 million in bad debt expense, partially offset by $0.6 million of lower professional fees.

Fiscal Year 2020 Compared to Fiscal Year 2019

S,G&A for 2020 decreased as compared to 2019 primarily due to decreases of approximately $1.2 million in non-cash stock-based compensation, $2.9 million in professional fees, $1.4 million in bad debt expense, $1.5 million in product promotion $0.8 million of accrued contingent consideration and $0.8 million of legalmarketing expenses, and patent maintenance cost.

Fiscal Year 2017 Compared to Fiscal Year 2016
S,G&A for 2017 increased as compared to the prior year, reflecting incremental S,G&A of $1.4$0.7 million from our acquisition of NVISin travel and a $1.5 million increase in professional fees. The incremental S,G&A from NVIS for 2017 primarily relates to the amortization of intangibles resulting from the acquisition.
related expenses.

Impairment of Goodwill and Intangibles. Goodwill and intangibles are evaluated for impairment annually or more often if indicators of a potential impairment are present. Our annual impairment testing of goodwill is performed separately from our impairment testing of intangibles. The Company performs impairment tests of goodwill at its reporting unit level. The goodwill valuations that are utilized to test these assets for impairment are depending on a number of significant estimates and assumptions, including macroeconomic conditions, overall growth rates, competitive activities, cost containment, Company business plans and the discount rate applied to cash flows. We believe these estimates and assumptions are reasonable and are comparable to those that would be used by other market participants. Impairment of goodwill for the fiscal years 2018, 20172021, 2020 and 20162019 were as follows:

(In thousands)2018 2017 2016
Impairment of goodwill$1,417
 $600
 $

(In thousands) 2021  2020  2019 
Impairment of goodwill $––  $––  $331 

During fiscal 2019, we recognized a $0.3 million goodwill impairment charge related to our e-MDT subsidiary. During fiscal 2018, we recognized a $1.4 million goodwill impairment charge related to our NVIS reporting unit and our Kopin Software Ltd. reporting unit. During fiscal year 2017, we recognized a $0.6 million goodwill impairment charge related to our NVIS reporting unit.subsidiaries. See Note 5 of the "Notes“Notes to Consolidated Financial Statements"Statements” for more information.

38

Impairment of Assets. 

The Company periodically reviews the carrying value of its long-lived assets to determine if facts and circumstances suggest that they may be impaired or that the amortization or depreciation period may need to be changed. The carrying value of a long-lived asset is considered impaired when the anticipated identifiable undiscounted cash flows from such asset are less than its carrying value. For assets that are to be held and used, impairment is measured based upon the amount by which the carrying amount of the asset exceeds its fair value. Impairment of assets for the fiscal years 2018, 2017 and 2016 were as follows:

(In thousands)2018 2017 2016
Impairment of assets$2,527
 $
 $
During fiscal 2018, we recognized a $2.5 million asset impairment charge related to equipment as discussed further in Note 2. of the "Notes to Consolidated Financial Statements."

21






Total Other Income (Expense), Net. Other income (expense), net, is primarily composed of interest income, foreign currency transaction, remeasurement gains and losses incurred by our Korean and UK-based subsidiaries and other non-operating income items. Other income (expense), net, for the fiscal years 2018, 20172021, 2020 and 20162019 were as follows:
 2018 2017 2016
(In thousands)
As Revised (1)
    
Total other income (expense), net$5,514
 $1,955
 $571
1.For discussion of the correcting adjustments, see Note 18 - Correction of Previously Issued Financial Statements

(In thousands) 2021  2020  2019 
Total other income (expense), net $436  $361  $(2,887)

Fiscal Year 20182021 Compared to Fiscal Year 2017

2020

In 20182021 we recorded $1.2$0.1 million of foreign currency gains compared to $1.0$0.3 million of foreign currency lossesgains recorded in 2017.2020. In 2018,2021 we recorded a $0.3 million gain on an equity investment.

Fiscal Year 2020 Compared to Fiscal Year 2019

In 2020 we recorded $0.3 million of foreign currency gains compared to $0.2 million of foreign currency gains recorded in 2019. In 2019, we recorded a non-cash $2.8$1.4 million gain on equity investments. In 2018, the Company received $1.0investments and an impairment charge of $5.2 million of insurance proceeds related to the embezzlement at our Korean subsidiary. In 2017, we recorded a non-cash $2.0 million gain on the fair value adjustment of a warrant we received as part of a license of our technology.

equity investment.

Tax provision

(In thousands) 2021  2020  2019 
Tax provision $(129) $(129) $(108)

Fiscal Year 20172021 Compared to Fiscal Year 2016

In 2017 and 2016, we recorded $1.0 million and $0.7 million of foreign currency losses, respectively. In 2017, we recorded a non-cash $2.0 million gain on the fair value adjustment of a warrant we received as part of a license of our technology. In 2016, we recorded a final additional gain of $1.0 million on the sale of our investment in Recon as a result of the release of amounts which were held in escrow at the time of the sale.

Tax benefit (provision)
(In thousands)2018 2017 2016
Tax (provision) benefit$(30) $2,963
 $(3,130)
Fiscal Year 2018 Compared to Fiscal Year 2017
2020

The provision for income taxes for the fiscal yearyears ended 20182021 and 2020 of less than $0.1approximately $(0.1) million was due to a change in estimates related to uncertain tax positions and deferred tax liabilities for the Company'sCompany’s former Korean subsidiary. The benefit for income taxes for the fiscal year ended 2017 of $3.0 million was driven by a reduction in foreign tax expense for the rate difference on a dividend distribution from the Company's Korean subsidiary of $0.8 million, an increase of uncertain tax positions of $0.2 million, the recognition of $1.1 million of net deferred tax liabilities in connection with the NVIS acquisition, which provided evidence of recoverability of the Company's net deferred tax assets that previously carried a full valuation allowance and resulted in a reduction in the valuation allowance of $1.1 million, a $1.0 million AMT credit that is expected to be refunded in the future and $0.3 million tax benefit related to the Kowon embezzlement loss.

For 2019, we expect to have movement in the foreign withholding tax relating to conversion rate changes. We also expect to have a state tax provision in 2019.

Fiscal Year 20172020 Compared to Fiscal Year 2016

The benefit for income taxes for the fiscal year ended 2017 of $3.0 million was driven by a reduction in foreign tax expense for the rate difference on a dividend distribution from the Company's Korean subsidiary of $0.8 million, an increase of uncertain tax positions of $0.2 million, the recognition of $1.1 million of net deferred tax liabilities in connection with the NVIS acquisition provided evidence of recoverability of the Company's net deferred tax assets that previously carried a full valuation allowance and resulted in a reduction in the valuation allowance of $1.1 million, a $1.0 million AMT credit that is expected to be refunded in the future and $0.3 million tax benefit related to the Kowon embezzlement loss. 2019

The provision for income taxes for the fiscal yearyears ended 20162020 and 2019 of $3.1approximately $(0.1) million represents $0.1 million of state tax, $1.0 million of tax for gain on sale of the Korean subsidiary’s building, $0.7 million forwas due to a change in estimates related to uncertain tax position, which includes potential interestpositions and penalties of $0.3 million, and foreign withholding of $1.4 million.

deferred tax liabilities for the Company’s former Korean subsidiary.

Net loss (income) loss attributable to noncontrolling interest. As of December 29, 2018,25, 2021, we owned 80% of the equity of eMDT. Net loss (income) attributable to noncontrolling interest on our consolidated statement of operations represents the portion of the results of operations of our majority owned subsidiaries which is allocated to the shareholders of the equity interests not owned by us. The change in net (income) loss attributable to noncontrolling interest in 20172021 compared to 2016 is the2020 was $0.1 million and in 2020 compared to 2019 was $0.3 million and was a result of the change in the results of operations of Kowon and eMDT. The change in net (income) losslosses attributable to noncontrolling interestminority shareholders of eMDT.

39

22






in 2016 compared to 2015 is the result of the change in the results of operations of Kowon and eMDT and for the period of time during 2015 when we owned 58% of Kopin Software Ltd.

Liquidity and Capital Resources

At December 29, 201825, 2021 and December 30, 2017,26, 2020, we had cash and cash equivalents and marketable securities of $37.2$29.3 million and working capital of $39.0$34.7 million compared to $68.8$20.7 million and $67.6$22.6 million, respectively. The change in cash and cash equivalents and marketable securities was primarily due to net outflowcash provided by sales of our common stock of $21.1 million, which was offset by cash used in operating activities of $28.1$10.7 million.

In Q1 2021, we sold 2.4 million which was partially offsetshares of common stock for gross proceeds of $16 million (average of $6.66 per share), before deducting broker expenses paid by net inflowus of cash provided$0.5 million pursuant to the Company’s At-The-Market Equity Offering Sales Agreement dated as of February 8, 2019 (the “Previous ATM Agreement”) with Stifel, Nicolaus & Company, Incorporated, (“Stifel”) as agent. In Q2 2021, we sold 0.1 million shares of common stock for gross proceeds of $0.8 million (average of $6.74 per share), before deducting broker expenses paid by investing activitiesus of $18.8 million. 

At December 30, 2017 and December 31, 2016, we had cash and cash equivalents and marketable debt securities$0.1 million under the Previous ATM Agreement. The Previous ATM Agreement has since terminated pursuant to its terms as a result of $68.8 million and working capital of $67.6 million compared to $77.2 million and $70.0 million, respectively. The change in cash and cash equivalents and marketable securities was primarily due to net outflow of cash used in operating activities of $25.9 million and acquisition of a company for $3.7 million, offset by cash provided by the sale of 7.6all the shares subject to such agreement. On March 5, 2021, the Company entered into a new At-The-Market Offering Sales Agreement (the “Current ATM Agreement”) with Stifel under which we may sell up to $50 million of our common stock. In Q3 2021, we sold 0.6 million shares of treasurycommon stock for $24.7gross proceeds of $4.8 million (average of $8.06 per share), before deducting broker expenses paid by us of $0.1 million under the Current ATM Agreement. The net proceeds from the sale of common shares were used for general corporate purposes, including working capital. We have available $44.3 million for sale of common stock under the Current ATM Agreement.

In the fourth quarter of 2020, we issued 1.9 million shares of our common stock pursuant to our At-The-Market Equity Offering Sales Agreement dated as of February 8, 2019 with Stifel, Nicolaus & Company, Incorporated, as agent (the “ATM Agreement”) for $4.0 million (average of $2.05 per share) in gross proceeds before deducting broker expenses paid by us of $0.1 million.

Cash The net proceeds from the sale of common shares were used for general corporate purposes, including working capital. In Q1 2021, we sold 2.4 million shares of common stock for gross proceeds of $16 million (average of $6.66 per share), before deducting broker expenses paid by us of $0.5 million under the ATM Agreement. The ATM Agreement has since terminated pursuant to its terms as a result of the sale of all the shares subject to such agreement.

During the second quarter of the fiscal year ending December 26, 2020, we received the proceeds from loans in the amount of approximately $2.2 million (the “PPP Loan”) pursuant to the Paycheck Protection Program (“PPP”) of the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”). During the second quarter of the fiscal year ending December 26, 2020 we repaid $2.1 million of the loans and we repaid $0.1 million in July 2020. Our decision to terminate the loans was based on additional guidance issued by the Small Business Administration. There were no prepayment penalties in connection with the voluntary repayment.

On March 15, 2019, we sold 7.3 million shares of registered common stock for gross proceeds of $8.0 million ($1.10 per share), before deducting underwriting discounts and offering expenses paid by us of $0.7 million. This represented approximately 8.9% of Kopin’s total outstanding shares of common stock as of the date of purchase. The net proceeds from the offering were used for general corporate purposes, including working capital. On April 10, 2019, we sold 0.7 million shares of registered common stock for gross proceeds of $0.8 million ($1.10 per share), before deducting underwriting discounts and offering expenses paid by us of less than $0.1 million, pursuant to the partial exercise of the underwriters’ overallotment option in connection with the March 15, 2019 public offering. This represented approximately 0.8% of Kopin’s total outstanding shares of common stock as of the date of purchase.

The following table presents the components of our cash and cash equivalents and marketable debt securities held in U.S. dollars at:

 December 29,
2018
 December 30,
2017
Domestic locations$36,182,663
 $55,488,190
Foreign locations418,339
 6,110,496
Subtotal cash and cash equivalents and marketable debt securities held in U.S. dollars36,601,002

61,598,686
Cash and cash equivalents held in other currencies and converted to U.S. dollars643,361
 7,156,998
Total cash and cash equivalents and marketable debt securities$37,244,363
 $68,755,684
as of the dates presented:

  December 25, 2021  December 26, 2020 
Domestic locations $27,031,695  $19,724,103 
Foreign locations  865,416   340,217 
Subtotal cash and cash equivalents and marketable debt securities held in U.S. dollars  27,897,111   20,064,320 
Cash and cash equivalents held in other currencies and converted to U.S. dollars  1,398,355   684,230 
Total cash and cash equivalents and marketable debt securities $29,295,466  $20,748,550 

We have no plans to repatriate the cash and cash equivalents held in our foreign subsidiary FDD and subsequent to year end we stopped operations at Kopin Software Ltd. which had no excess cash and, as such, we have not recorded any deferred tax liability with respect to such cash. FDD.

The manufacturing operations at our Korean facility, Kowon, have ceased and Kowon was liquidated at fiscal year ended 2018. The Company has approximately $0.4 million of cash and cash equivalents in Korea at December 29, 2018, in the event of any tax liabilities are identified.25, 2021. The Company has recorded deferred tax liabilities for any additional withholding tax that may be due to the Korean government upon Kowon'sKowon’s final tax return acceptance.

In March 2017, we purchased 100% of the outstanding stock of NVIS, a producer of virtual reality systems for 3D applications, for $3.7 million. We expect to pay approximately $1.3 million in March 2019 and may be requiredAs part of the purchase, we agreed to pay up to andan additional $0.7$2.0 million if certain future operating performance milestones arewere met and the selling shareholders remain employed with NVIS through March 2020. We have paid $1.8 million in contingent consideration through December 26, 2020 and there are no remaining contingent payment obligations related to the NVIS purchase as of December 25, 2021. As there iswas a requirement to remain employed to earn the contingent payments, these contingent payments will bewere treated as compensation expense.

40

In the second quarter of 2019, we made an additional equity investment in RealWear, Inc. of $2.5 million by participating in an equity raise by RealWear. In the fourth quarter of 2019 Kopin reviewed the financial condition and other factors of RealWear and as a result, in the fourth quarter of 2019, we recorded an impairment charge of $5.2 million to reduce our investment in RealWear to zero as of December 28, 2019.

On September 30, 2019 we entered into the Solos Purchase Agreement with Solos Technology, pursuant to which we sold and licensed certain assets of our Solos product line and Whisper technology. As consideration for the transaction, we received a 20.0% equity stake in Solos Technology’s parent company, Solos Inc. Our 20.0% equity stake will be maintained until Solos Inc. has raised a total of $7.5 million in equity financing. We expect to expend between $1.5will also receive a royalty in the single digits on the net sales amount of Solos products for a three-year period, after commencement of commercial production. Based on the price paid for equity by the other 80% owners of Solos Inc., volatility based on a peer group and assumptions about the risk free interest rate, we estimated the fair value of our equity holdings at $0.6 million and $2.0recorded $0.6 million gain on capital expenditures overinvestment for this equity transaction as the next twelve months.

The Company has entered into an agreement to make a capital contributionbasis of approximately $5.1 million (the Company's capital contribution under the agreement is $35.0 million Chinese Yuan Renminbi). The Company’s ability to make its capital contribution is subject to Chinese laws which include restrictions of direct foreign investment. Accordingly, the Company will need to make the capital contribution through its Chinese subsidiary’s operations.assets transferred was zero.

The Company hasWe have incurred net losses of $34.5$13.4 million, $25.4$4.4 million and $23.0$29.5 million for the fiscal years ended 2018, 20172021, 2020 and 2016,2019, respectively, and net cash outflows from operations of $28.1$10.7 million, $25.9$4.4 million and $26.2$21.0 million for the fiscal years ended 2018, 20172021, 2020 and 2016,2019, respectively. In addition, the Company has continued to experience a significant decline in itsOur net cash and cash equivalents and marketable debt securities, whichoutflows from operations was primarilypartially a result of funding operating losses, of which a significant component relates to the Company’sour ongoing investments in the research and development which we believe will continue. We have in the past sold equity securities through an At The Money program and in the traditional fashion of Wearable products. These negative financialsignificant equity offerings. We estimate we will have sufficient liquidity to fund operations at least through Q1 2023. Nonetheless, we monitor the capital markets on an ongoing basis and may consider raising capital if favorable market conditions develop. If our actual results are less than projected or we need to raise substantial doubt regarding the Company’s abilitycapital for additional liquidity, we may be required to continue asdo additional equity financings, reduce expenses or enter into a going concern. strategic transaction. However, we can make no assurance that we will be able to raise additional capital, reduce expenses sufficiently, or enter into a strategic transaction on terms acceptable to us, or at all.

Off-Balance Sheet Arrangements

We have no off-balance sheet arrangements.


23






Seasonality

Our revenues have not followed a seasonal pattern for the past three years and we do not anticipate any seasonal trend to our revenues in 2019.

Climate Change
We do not believe there is anything unique to our business which would result in climate change regulations having a disproportional effect on us as compared to U.S. industry overall.
Inflation
We do not believe our operations have been materially affected by inflation in the last three fiscal years.
2022.

Contractual Obligations

The following is a summary of our contractual lease payment obligations as of December 29, 2018:25, 2021:

  Payment due by period 
  Total  Less than
1 year
  1-3 Years  4-5 years  More than
5 years
 
Operating Lease Obligations $4,557,858   915,661   2,232,864   1,409,333    

41
 Payment due by period
 Total Less than 1 year 1-3 Years 4-5 years More than 5 years
Operating leases$4,060,000
 $1,210,000
 $2,649,000
 $201,000
 $

The Company has entered into an agreement

Item 7A.Quantitative and Qualitative Disclosures About Market Risk

We invest our excess cash in high-quality U.S. government, government-backed (i.e.: Fannie Mae, FDIC guaranteed bonds and certificates of deposit) and corporate debt instruments, which bear lower levels of relative risk. We believe that the effect, if any, of reasonably possible near-term changes in interest rates on our financial position, results of operations and cash flows should not be material to makeour cash flows or income. It is possible that interest rate movements would increase our unrealized gain or loss on debt securities. We are exposed to changes in foreign currency exchange rates primarily through our translation of our foreign subsidiaries’ financial position, results of operations, and transaction gains and losses as a capital contributionresult of approximately $5.1 million (the Company's capital contribution undernon U.S. dollar denominated cash flows related to business activities in Asia and Europe, and remeasurement of U.S. dollars to the agreement is $35.0 million Chinese Yuan Renminbi). The Company’s abilityfunctional currency of our U.K. subsidiary. We are also exposed to make its capital contributionthe effects of exchange rates in the purchase of certain raw materials which are in U.S. dollars but the price on future purchases is subject to Chinese laws which include restrictionschange based on the relationship of directthe Japanese yen to the U.S. dollar. We do not currently hedge our foreign investment. Accordingly,currency exchange rate risk. We estimate that any market risk associated with our international operations or investments is unlikely to have a material adverse effect on our business, financial condition or results of operation. Our portfolio of marketable debt securities is subject to interest rate risk although our intent is to hold securities until maturity. The credit rating of our investments may be affected by the Company will need to makeunderlying financial health of the capital contribution through its Chinese subsidiary’s operations.


guarantors of our investments. We use silicon wafers in our production processes but do not enter into forward or futures hedging contracts.

Item 8.Financial Statements and Supplementary Data

The financial statements required by this Item are included in this Report on pages 2944 through 64.72. Reference is made to Item 15 of this Report.


Item 9.Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

Not applicable.

Item 9A.Controls and Procedures (As Revised)

Correction of Previously Issued Financial Statements

On October 17, 2019, the Audit Committee of our Board of Directors (the “Audit Committee”) determined that it would be necessary for the Company to correct certain immaterial misstatements identified in its previously-issued consolidated financial statements. The Audit Committee made this determination following consultation with and upon the recommendation of management. Refer to "Part II. Item 7 - Management’s Discussion and Analysis of Financial Condition and Results of Operations" and Note 18. Correction of Previously Issued Financial Statements included in "Part IV. Item 15 - Exhibits and Financial Statement Schedules" for a more detailed description of the misstatements.

Notwithstanding the existence of the material weakness described below, we believe that the revised consolidated financial statements in this Form 10-K/A fairly present, in all material respects, our financial position, results of operations and cash flows as of the dates, and for the periods, presented, in conformity with generally accepted accounting principles (“GAAP”).

Evaluation of Disclosure Controls and Procedures (as revised)

In connection with filing the Original Form 10-K, management, under the supervision of and with the participation of our Chief Executive Officer and our Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures, as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the "Exchange Act"“Exchange Act”), as of the end of the period covered by our Annual Report on Form 10-K for the fiscal year ended December 29, 2018.25, 2021. Based on suchupon that evaluation, as of March 13, 2019, managementour CEO and CFO concluded that, as of the end of suchthe period covered by this report, our disclosure controls and procedures were effective.

Subsequenteffective in ensuring that material information required to be disclosed by us in the reports that evaluation,we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in connection with the correction of certain immaterial misstatements identified in its previously-issued consolidated financial statements for the fiscal year ended December 29, 2018,SEC’s rules and forms, including ensuring that such material information is accumulated and communicated to our management, reevaluated the

24






effectiveness ofincluding our disclosure controlsCEO and proceduresCFO, as of December 29, 2018 and concluded that because of the material weakness identified in our internal control over financial reporting discussed below, our disclosure controls and procedures were not effective as of December 29, 2018.

Management'sappropriate to allow timely decisions regarding required disclosure.

Management’s Annual Report on Internal Control Over Financial Reporting (as revised)

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. A company’s internal control over financial reporting is a process designed by, or under the supervision of, the company’s principal executive and principal financial officers, or persons performing similar functions, and effected by the Company’s Board of Directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and include those policies and procedures that:

Pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company;
Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made in accordance with authorizations of management and directors of the company; and
Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the company's assets that could have a material effect on the financial statements.

Pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company;
Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made in accordance with authorizations of management and directors of the company; and
Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Under the supervision of and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an evaluation of our internal control over financial reporting as of December 29, 2018,25, 2021, based on the framework set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control-Integrated Framework (2013 framework). Based on that evaluation, as of March 13, 2019, our management concluded that, as of December 29, 2018,25, 2021, internal control over financial reporting was effective based on criteria established in Internal Control-Integrated Framework issued by the COSO.

42
Subsequent to that evaluation,

Changes in connection with the correction of certain immaterial misstatements identifiedInternal Control Over Financial Reporting

There were no changes in its previously-issued consolidated financial statements for the fiscal year ended December 29, 2018, management, under the supervision of and with the participation of our Chief Executive Officer and Chief Financial Officer, reevaluated the effectiveness of our internal control over financial reporting based on the criteria established by the COSO. Based on this evaluation, management concluded that our internal control over financial reporting was not effective as of December 29, 2018 because of a material weakness. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the annual or interim financial statements will not be prevented or detected on a timely basis.

Management identified a material weakness in internal control over financial reporting as of December 29, 2018. We did not design and maintain effective controls related to management’s monitoring and oversight of accounting for non-routine transactions. Specifically, our internal controls were not designed effectively to ensure appropriate and timely evaluation of the accounting impact for non-routine transactions, including the accounting for non-controlling interest and other investments.
Our independent registered public accounting firm, Deloitte & Touche LLP, has reissued their report on our internal controls over financial reporting. Deloitte’s reissued report appears on page 27.

Changes in Internal Control Over Financial Reporting
Except for the material weakness discussed above in this Item 9A that has been assessed as a material weakness as of December 29, 2018, there were no other changes in the Company’s internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act) that occurred during the fiscal quarteryear ended December 29, 201825, 2021 that have materially affected or are reasonably likely to materially affect the Company’s internal control over financial reporting.

Management’s Plan to Remediate the Material Weakness
We are committed and are taking steps necessary to remediate the control deficiencies that constituted the above material weakness by implementing changes to our internal control over financial reporting.

Item 9B.Other Information

None.

Item 9C.Disclosure Regarding Foreign Jurisdictions that Prevent Inspection

Not applicable.

Item 10.Directors, Executive Officers and Corporate Governance

The information required under this item is incorporated herein by reference from our Proxy Statement relating to our 2022 Annual Meeting of Stockholders (the “Proxy Statement”). We areexpect to file the Proxy Statement with the SEC in April, 2022 (and, in any event, no later than 120 days after the processclose of designingour last fiscal year).

Code of Ethics. We have adopted a Code of Business Conduct and


25






implementing measures Ethics (the Code) that applies to remediateall of our employees (including our CEO and CFO) and directors. The Code is available on our website at www.kopin.com. We intend to satisfy the underlying causesdisclosure requirement regarding any amendment to or waiver of a provision of the control deficiencies that gave riseCode applicable to any executive officer or director, by posting such information on our website.

Our corporate governance guidelines, whistleblower policy and the material weakness. In addition, we are providing in-house accounting personnel training to ensure that they havecharters of the relevant expertise related to the monitoringaudit committee, compensation committee and oversightnominating and corporate governance committee of accounting for non-routine transactions. We will continue to monitor the effectiveness of these controls and will make any further changes management determines appropriate.


26






REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and the Board of Directors of Kopin Corporation

Opinionas well as other corporate governance document materials are available on Internal Control over Financial Reporting

We have auditedour website at www.kopin.com under the internal control over financial reporting of Kopin Corporation and subsidiaries (the “Company”) as of December 29, 2018, based on criteria established in heading “Investors,” then “Corporate Governance” then “Governance Documents.”

Internal Control - Integrated Framework (2013) 

Item 11.Executive Compensation

issued

The information required by this item is incorporated herein by reference from the Committee of Sponsoring OrganizationsProxy Statement.

Item 12.Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information required by this item is incorporated herein by reference from the Treadway Commission (COSO). In our opinion, because of the effect of the material weakness identified below on the achievement of the objectives of the control criteria, the Company has not maintained effective internal control over financial reporting as of December 29, 2018, based on criteria established in Internal Control - Integrated Framework (2013) issued by COSO.


In our report dated March 13, 2019, we expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting. As described below, a material weakness was subsequently identified as a result of the correction of the previously issued financial statements. Accordingly, management has revised its assessment about the effectiveness of the Company’s internal control over financial reporting and our present opinion on the effectiveness of the Company’s internal control over financial reporting as of December 29, 2018, as expressed herein, is different from that expressed in our previous report.

We haveProxy Statement. Refer also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated financial statements as of and for the year ended December 29, 2018, of the Company and our report dated March 13, 2019 (November 7, 2019, as to the effectsequity compensation plan information set forth in Part II Item 5 of the errors discussed in Note 18 to the financial statements), expressed an unqualified opinion on those financial statements and included explanatory paragraphs relating to going concern and the Company’s adoption of a new accounting standard.

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’sthis Annual Report on Internal Control Over Financial Reporting (as revised). Our responsibilityForm 10-K.

Item 13.Certain Relationships and Related Transactions, and Director Independence

The information required by this item is to express an opinion onincorporated herein by reference from the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered withProxy Statement.

Item 14.Principal Accounting Fees and Services

The information required by this item is incorporated herein by reference from the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.


We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reportingProxy Statement.

 may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.



27






Material Weakness

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the Company’s annual or interim financial statements will not be prevented or detected on a timely basis. The following material weakness has been identified and included in management's assessment: The Company did not design and maintain effective controls related to management’s monitoring and oversight of accounting for non-routine transactions. This material weakness was considered in determining the nature, timing, and extent of audit tests applied in our audit of the consolidated financial statements as of and for the year ended December 29, 2018 of the Company, and this report does not affect our report on such financial statements.

/s/ Deloitte & Touche LLP

Boston, Massachusetts

March 13, 2019 (November 7, 2019, as to the effects of the material weakness described in Management’s Annual Report on Internal Control over Financial Reporting (as revised)).


28





Part IV

43

Part IV

Item 15.Exhibits and Financial Statement Schedules

(1) Consolidated Financial Statements (As Revised)Statements:

1:

1.The consolidated financial statements have been revised to correct the misstatements described in Note 18 - Correction of Previously Issued Financial Statements.

(2) Financial Statement Schedules:

Financial Statement Schedules have been omitted because the information required to be set forth therein is not applicable or is shown in the accompanying Consolidated Financial Statements or notes thereto.



(3) Exhibits:

Exhibits:

The exhibits filed as part of this Form 10-K/A10-K are listed on the exhibit index immediately preceding such exhibits and is incorporated herein by reference.

44






29





REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the

Report of Independent Registered Public Accounting Firm

Stockholders and the Board of Directors of Kopin Corporation


Opinion on the Financial Statements


We have audited the accompanying consolidated balance sheets of Kopin Corporation and its subsidiaries (the “Company”)Company) as of December 29, 201825, 2021 and December 30, 2017,26, 2020, the related consolidated statements of operations, comprehensive loss, stockholders’ equity and cash flows for each of the three years in the period ended December 29, 2018,25, 2021, and the related notes to the consolidated financial statements (collectively, referred to as the “financial statements”)financial statements). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 29, 201825, 2021 and December 30, 2017,26, 2020, and the results of its operations and its cash flows for each of the three years in the periodthen ended, December 29, 2018, in conformity with accounting principles generally accepted in the United States of America.


We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company’s internal control over financial reporting as of December 29, 2018, based on criteria established in Internal Control - Integrated Framework (2013)

 issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 13, 2019 (November 7, 2019, as to the effects of the material weakness described in Management’s Annual Report on Internal Control Over Financial Reporting (as revised)), which report expressed an adverse opinion on the Company’s internal control over financial reporting because of a material weakness.


Going Concern

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 1 to the financial statements, the Company has suffered recurring losses from operations and recurring negative operating cash flows that raise substantial doubt about its ability to continue as a going concern. Management's plans in regard to these matters are also described in Note 1. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

Change in Accounting Principle

As discussed in Note 1 to the financial statements, the Company adopted Accounting Standards Codification (ASC) Topic 606, “Revenue from Contracts with Customers,” using the modified retrospective adoption method on December 31, 2017.

Basis for Opinion


These financial statements are the responsibility of the Company'sCompany’s management. Our responsibility is to express an opinion on the Company'sCompany’s financial statements based on our audits. We are a public accounting firm registered with the PCAOBPublic Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.


We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.


/s/ Deloitte & Touche LLP

Boston, Massachusetts

March 13, 2019 (November 7, 2019, as

Critical Audit Matters

The critical audit matter communicated below is a matter arising from the current period audit of the financial statements that was communicated or required to be communicated to the effects of the errors discussed in Note 18audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements)


statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.

Research and Development Revenues

The Company’s research and development revenues were $14,668,471 for the year ending December 25, 2021 and are described in Note 1 of the consolidated financial statements. The Company recognizes revenue for certain of its research and development contracts over time, generally using the input (cost-to-cost) method. Progress is measured and revenues from research and development contracts are generally recognized on an input method of accounting as costs are incurred. Under the input method, revenue is recognized based on contract costs expended to date relative to total contract costs intended to be expended. Management exercises significant judgment in determining revenue recognition for these customer contracts as the estimate of the total contract costs is critical to the recognition of revenue based under the input method.

We identified the Company’s accounting for revenue recognition of research and development contracts to be a critical audit matter because of the significant assumptions and judgments used by management in determining the estimated costs to be incurred throughout the customer contract. Auditing management’s estimation of cost recognition required significant audit effort and a high degree of auditor judgment and subjectivity to evaluate the audit evidence obtained.

Our audit procedures related to the Company’s revenue recognition of research and development contracts included the following, among others:

Evaluated the reasonableness of management estimates of cost recognition for a selection of contracts by comparing costs incurred under the contracts to the costs estimated by management.
We selected a sample of customer contracts and performed the following procedures:
Read the underlying contracts and agreed the Company’s total budgeted costs to approved management budgets.
Evaluated management’s ability to achieve the estimates of total profit by performing corroborating inquiries with Company personnel, including project managers, and comparing the estimates to actual subsequent results and documentation such as management’s internal budgets and specified contract terms.

/s/ RSM US LLP

We have served as the Company'sCompany’s auditor since at least 1987; however, an earlier year could not be reliably determined.2019.

Stamford, Connecticut

March 14, 2022

45

30






KOPIN CORPORATION

CONSOLIDATED BALANCE SHEETS

 

 December 29,
2018
 December 30,
2017
 
(As Revised)1
 
(As Revised)1
ASSETS   
Current assets:   
Cash and cash equivalents$14,326,347
 $24,848,227
Marketable debt securities, at fair value22,918,016
 43,907,457
Accounts receivable, net of allowance of $304,000 and $149,000 in 2018 and 2017, respectively3,088,360
 3,955,123
Contract assets and unbilled receivables3,089,663
 704,863
Inventory4,797,238
 5,080,797
Prepaid taxes399,611
 264,352
Prepaid expenses and other current assets784,790
 978,677
Total current assets49,404,025
 79,739,496
Property, plant and equipment, net2,598,842
 5,077,043
Goodwill331,344
 1,780,247
Intangibles
 883,636
Other assets1,649,401
 3,842,068
Equity investments5,565,499
 
Total assets$59,549,111
 $91,322,490
LIABILITIES AND STOCKHOLDERS’ EQUITY   
Current liabilities:   
Accounts payable$3,921,880
 $4,918,605
Accrued payroll and expenses3,038,005
 1,636,512
Accrued warranty571,000
 649,000
Contract liabilities and billings in excess of revenue earned388,933
 896,479
Other accrued liabilities1,901,547
 2,066,025
Income tax payable
 1,416,892
Deferred tax liabilities546,000
 520,000
Total current liabilities10,367,365
 12,103,513
Contract liabilities, noncurrent17,294
 374,171
Asset retirement obligations254,098
 269,877
Other long-term liabilities1,197,533
 1,195,082
Commitments and contingencies (Note 12)


 


Stockholders’ equity:   
Preferred stock, par value $.01 per share: authorized, 3,000 shares; none issued
 
Common stock, par value $.01 per share: authorized, 120,000,000 shares; issued 80,735,320 shares in 2018 and 80,201,313 shares in 2017; outstanding 74,008,815 in 2018 and 73,058,783 in 2017, respectively785,220
 775,720
Additional paid-in capital334,491,397
 329,917,858
Treasury stock (4,513,256 shares in 2018 and 2017, at cost)
(17,238,669) (17,238,669)
Accumulated other comprehensive income1,554,587
 3,564,779
Accumulated deficit(271,730,661) (240,256,502)
Total Kopin Corporation stockholders’ equity47,861,874
 76,763,186
Noncontrolling interest(149,053) 616,661
Total stockholders’ equity47,712,821
 77,379,847
Total liabilities and stockholders’ equity$59,549,111
 $91,322,490
1.For discussion of the correcting adjustments, see Note 18 - Correction of Previously Issued Financial Statements

  December 25, 2021  December 26, 2020 
ASSETS        
Current assets:        
Cash and cash equivalents $26,787,931  $17,112,869 
Marketable debt securities, at fair value  2,507,535   3,635,681 
Accounts receivable, net of allowance of $150,000 and $175,000 in 2021 and 2020, respectively  12,113,070   9,260,865 
Contract assets and unbilled receivables  2,299,392   3,521,753 
Inventory  6,581,139   4,455,756 
Prepaid taxes  160,599   205,568 
Prepaid expenses and other current assets  1,758,079   1,263,688 
Total current assets  52,207,745   39,456,180 
Property, plant and equipment, net  1,888,963   1,626,930 
Operating lease right-of-use assets  3,828,066   1,780,039 
Other assets  170,932   162,473 
Equity investments  4,912,022   4,523,525 
Total assets $63,007,728  $47,549,147 
LIABILITIES AND STOCKHOLDERS’ EQUITY        
Current liabilities:        
Accounts payable $5,483,970  $5,606,910 
Accrued payroll and expenses  2,413,744   1,977,851 
Accrued warranty  517,000   508,000 
Contract liabilities and billings in excess of revenue earned  4,063,031   1,493,847 
Operating lease liabilities  701,204   982,375 
Other accrued liabilities  1,202,635   1,809,495 
Customer deposits  2,638,103   3,950,031 
Deferred tax liabilities  513,417   554,000 
Total current liabilities  17,533,104   16,882,509 
Noncurrent contract liabilities and asset retirement obligations  288,634   276,409 
Operating lease liabilities, net of current portion  3,108,236   821,306 
Other long-term liabilities, net of current portion  2,450,897   1,270,328 
Total liabilities  23,380,871   19,250,552 
Commitments and contingencies (Note 13)  -   - 
Stockholders’ equity:        
Preferred stock, par value $.01 per share: authorized, 3,000 shares; NaN issued      
Common stock, par value $.01 per share: authorized, 150,000,000 shares; issued 92,146,761 shares in 2021 and 91,059,407 shares in 2020; outstanding 89,988,528, in 2021 and 85,443,378 in 2020, respectively  900,691   880,075 
Additional paid-in capital  356,931,157   341,512,893 
Treasury stock (80,641 and 2,564,155 shares in 2021 and 2020, at cost)  (366,110)  (9,793,946)
Accumulated other comprehensive income  1,414,351   1,484,434 
Accumulated deficit  (319,080,898)  (305,648,025)
Total Kopin Corporation stockholders’ equity  39,799,191   28,435,431 
Noncontrolling interest  (172,334)  (136,836)
Total stockholders’ equity  39,626,857   28,298,595 
Total liabilities and stockholders’ equity $63,007,728  $47,549,147 

See Accompanying Notes to Consolidated Financial Statements.

46

31





KOPIN CORPORATION

CONSOLIDATED STATEMENTS OF OPERATIONS

 2018 2017 2016
Fiscal year ended
(As Revised)1
   
(As Revised)1
Revenues:     
Net product revenues$19,211,115
 $24,894,805
 $21,115,125
Research and development and other revenues5,253,890
 2,946,685
 1,527,441
Total revenue24,465,005
 27,841,490
 22,642,566
Expenses:     
Cost of product revenues15,831,441
 18,118,418
 17,814,271
Research and development-funded programs4,892,066
 3,364,658
 786,867
Research and development-internal12,553,237
 15,515,057
 15,252,794
Selling, general and administrative27,210,849
 20,541,244
 16,961,773
Impairment of goodwill1,417,470
 600,086
 
Impairment of assets2,526,669
 
 
Gain on sale of property, plant and equipment
 
 (7,700,522)
Total operating expenses64,431,732
 58,139,463
 43,115,183
Loss from operations(39,966,727) (30,297,973) (20,472,617)
Non-operating income (expense), net:     
Interest income640,059
 775,626
 658,384
Other income (expense), net855,106
 247,291
 (448,581)
Foreign currency transaction gains (losses)1,169,254
 (1,068,059) (672,727)
Gain on investments2,849,816
 2,000,000
 1,034,396
Total non-operating income5,514,235
 1,954,858
 571,472
Loss before benefit (provision) for income taxes and net loss (income) of noncontrolling interest(34,452,492) (28,343,115) (19,901,145)
Tax (provision) benefit(30,000) 2,963,000
 (3,130,000)
Net loss(34,482,492) (25,380,115) (23,031,145)
Net (income) loss attributable to the noncontrolling interest(51,050) 139,633
 (537,572)
Net loss attributable to Kopin Corporation$(34,533,542) $(25,240,482) $(23,568,717)
Net loss per share:     
Basic and diluted$(0.47) $(0.36) $(0.37)
Weighted average number of common shares outstanding:     
Basic and diluted73,156,545
 69,914,956
 64,045,675
1.For discussion of the correcting adjustments, see Note 18 - Correction of Previously Issued Financial Statements

Fiscal year ended 2021  2020  2019 
Revenues:            
Net product revenues $29,882,271  $28,517,874  $20,283,888 
Research and development revenues  14,668,471   10,122,677   4,982,868 
License and other revenues  1,115,375   1,487,118   4,252,053 
Total revenues  45,666,117   40,127,669   29,518,809 
Expenses:            
Cost of product revenues  25,052,383   21,398,381   20,901,538 
Research and development-funded programs  9,976,103   7,745,762   4,216,161 
Research and development-internal  6,312,148   3,924,241   9,132,969 
Selling, general and administrative  18,100,519   11,822,703   21,316,459 
Impairment of goodwill        331,344 
Total operating expenses  59,441,153   44,891,087   55,898,471 
Loss from operations  (13,775,036)  (4,763,418)  (26,379,662)
Non-operating income (expense), net:            
Interest income  31,142   132,642   543,759 
Other income (expense), net  265,509   (35,463)  225,617 
Foreign currency transaction gains  139,014   293,670   202,517 
Loss on investments     (29,356)  (3,858,453)
Total non-operating income (expense)  435,665   361,493   (2,886,560)
Loss before provision for income taxes and net loss (income) of noncontrolling interest  (13,339,371)  (4,401,925)  (29,266,222)
Tax provision  (129,000)  (129,000)  (108,000)
Net loss  (13,468,371)  (4,530,925)  (29,374,222)
Net loss (income) attributable to the noncontrolling interest  35,498   119,813   (132,030)
Net loss attributable to Kopin Corporation $(13,432,873) $(4,411,112) $(29,506,252)
Net loss per share:            
Basic and diluted $(0.15) $(0.05) $(0.37)
Weighted average number of common shares outstanding:            
Basic and diluted  88,903,658   82,347,741   80,282,126 

See Accompanying Notes to Consolidated Financial Statements.

47














32





KOPIN CORPORATION

CONSOLIDATED STATEMENTS OF COMPREHENSIVE LOSS

 2018 2017 2016
Fiscal year ended
(As Revised)1
   
(As Revised)1
Net loss$(34,482,492) $(25,380,115) $(23,031,145)
Other comprehensive income (loss), net of tax:     
          Foreign currency translation adjustments(1,912,427) 1,921,655
 809,099
          Unrealized holding (loss) gain on marketable securities(264,949) 148,520
 33,464
          Reclassifications of gain (loss) in net loss49,525
 (6,376) (48,284)
Other comprehensive (loss) income, net of tax(2,127,851) 2,063,799
 794,279
Comprehensive loss(36,610,343) (23,316,316) (22,236,866)
Comprehensive loss (income) attributable to the noncontrolling interest66,609
 69,642
 (532,654)
Comprehensive loss attributable to Kopin Corporation$(36,543,734) $(23,246,674) $(22,769,520)


1.For discussion of the correcting adjustments, see Note 18 - Correction of Previously Issued Financial Statements


Fiscal year ended 2021  2020  2019 
Net loss $(13,468,371) $(4,530,925) $(29,374,222)
Other comprehensive (loss) income, net of tax:            
Foreign currency translation adjustments  (51,736)  (67,852)  (206,580)
Unrealized holding (loss) gain on marketable securities  (17,113)  (183,870)  446,533 
Reclassifications of loss in net loss on marketable securities  (1,234)  (21,028)  (37,356)
Total other comprehensive (loss) income, net of tax  (70,083)  (272,750)  202,597 
Comprehensive loss  (13,538,454)  (4,803,675)  (29,171,625)
Comprehensive loss (income) attributable to the noncontrolling interest  35,498   119,813   (132,030)
Comprehensive loss attributable to Kopin Corporation $(13,502,956) $(4,683,862) $(29,303,655)

See Accompanying Notes to Consolidated Financial Statements.

48


33






KOPIN CORPORATION

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY (As Revised)

1

  Shares  Amount  Capital  Stock  Income  Deficit  Equity  Interest  Equity 
  Common Stock  Additional Paid-in  Treasury  Accumulated Other Comprehensive  Accumulated  Total Kopin Corporation Stockholders’  Noncontrolling  Total Stockholders’ 
  Shares  Amount  Capital  Stock  Income  Deficit  Equity  Interest  Equity 
Balance, December 29, 2018  78,522,066  $785,220  $334,491,397  $(17,238,669) $1,554,587  $(271,730,661) $47,861,874  $(149,053) $47,712,821 
Vesting of restricted stock  634,511   6,345   (6,345)  -   -   -   -   -   - 
Stock-based compensation expense  -   -   2,057,400   -   -   -   2,057,400   -   2,057,400 
Other comprehensive income  -   -   -   -   202,597   -   202,597   -   202,597 
Restricted stock for tax withholding obligations  (86,086)  (861)  (44,652)  -   -   -   (45,513)  -   (45,513)
Sale of registered stock, net of costs  7,979,181   79,792   7,958,737   -   -   -   8,038,529   -   8,038,529 
Issuance of common stock                                    
Issuance of common stock, shares                                    
Sale of treasury stock, net of costs                                    
Net (loss) income  -   -   -   -   -   (29,506,252)  (29,506,252)  132,030   (29,374,222)
Balance, December 28, 2019  87,049,672   870,496   344,456,537   (17,238,669)  1,757,184   (301,236,913)  28,608,635   (17,023)  28,591,612 
Vesting of restricted stock  1,038,655   10,387   (10,387)  -   -   -   -   -   - 
Stock-based compensation expense  -   -   821,122   -   -   -   821,122   -   821,122 
Other comprehensive loss  -   -   -   -   (272,750)  -   (272,750)  -   (272,750)
Restricted stock for tax withholding obligations  (80,792)  (808)  (139,118)  -   -   -   (139,926)  -   (139,926)
Sale of treasury stock, net of costs  -   -   (3,615,261)  7,444,723   -   -   3,829,462   -   3,829,462 
Net loss  -   -   -   -   -   (4,411,112)  (4,411,112)  (119,813)  (4,530,925)
Balance, December 26, 2020  88,007,535   880,075   341,512,893   (9,793,946)  1,484,434   (305,648,025)  28,435,431   (136,836)  28,298,595 
Vesting of restricted stock  1,576,953   15,770   (15,770)  -   -   -   -   -   - 
Stock-based compensation expense  -   -   4,417,422   -   -   -   4,417,422   -   4,417,422 
Other comprehensive loss  -   -   -   -   (70,083)  -   (70,083)  -   (70,083)
Restricted stock for tax withholding obligations  (47,859)  (479)  (235,491)  (366,110)  -   -   (602,080)  -   (602,080)
Issuance of common stock  532,540   5,325   4,141,876   -   -   -   4,147,201   -   4,147,201 
Sale of treasury stock, net of costs  -   -   7,110,227   9,793,946   -   -   16,904,173   -   16,904,173 
Net loss  -   -   -   -   -   (13,432,873)  (13,432,873)  (35,498)  (13,468,371)
Net (loss) income  -   -   -   -   -   (13,432,873)  (13,432,873)  (35,498)  (13,468,371)
Balance, December 25, 2021  90,069,169  $900,691  $356,931,157  $(366,110) $1,414,351  $(319,080,898) $39,799,191  $(172,334) $39,626,857 

 

 Common Stock 
Additional
Paid-in
Capital
 
Treasury
Stock
 
Accumulated
Other
Comprehensive
Income
 
Accumulated
Deficit
 
Total Kopin
Corporation
Stockholders’
Equity
 
Noncontrolling
Interest
 
Total
Stockholders’
Equity
 Shares Amount 
Balance at December 26, 201576,079,643
 $760,797
 $325,357,045
 $(42,741,551) $771,774
 $(190,608,671) $93,539,394
 $945,386
 $94,484,780
Vesting of restricted stock736,842
 7,368
 (7,368) 
 
 
 
 
 
Stock-based compensation expense
 
 2,482,326
 
 
 
 2,482,326
 
 2,482,326
Other comprehensive income (loss)
 
 
 
 799,197
 
 799,197
 (4,918) 794,279
Restricted stock for tax withholding obligations(175,542) (1,756) (508,841) 
 
 
 (510,597) 
 (510,597)
Net (loss) income
 
 
 
 
 (23,568,717) (23,568,717) 537,572
 (23,031,145)
Balance at December 31, 201676,640,943
 766,409
 327,323,162
 (42,741,551) 1,570,971
 (214,177,388) 72,741,603
 1,478,040
 74,219,643
Vesting of restricted stock1,170,847
 11,708
 (11,708) 
 
 
 
 
 
Stock-based compensation expense
 
 3,375,330
 
 
 
 3,375,330
 
 3,375,330
Other comprehensive income
 
 
 
 1,993,808
 
 1,993,808
 69,991
 2,063,799
Restricted stock for tax withholding obligations(239,752) (2,397) (768,926) 
 
 
 (771,323) 
 (771,323)
Distribution to noncontrolling interest holder
 
 
 
 
 
 
 (791,737) (791,737)
Sale of unregistered stock
 
 
 25,502,882
 
 (838,632) 24,664,250
 
 24,664,250
Net loss
 
 
 
 
 (25,240,482) (25,240,482) (139,633) (25,380,115)
Balance at December 30, 201777,572,038
 775,720
 329,917,858
 (17,238,669) 3,564,779
 (240,256,502) 76,763,186
 616,661
 77,379,847
Vesting of restricted stock1,093,000
 10,930
 (10,930) 
 
 
 
 
 
Stock-based compensation expense
 
 4,791,054
 
 
 
 4,791,054
 
 4,791,054
Other comprehensive loss
 
 
 
 (2,010,192) 
 (2,010,192) (117,659) (2,127,851)
Restricted stock for tax withholding obligations(142,972) (1,430) (206,585) 
 
 
 (208,015) 
 (208,015)
Distribution to noncontrolling interest holder
 
 
 
 
 
 
 (699,105) (699,105)
Adoption of accounting standard (Note 1)
 
 
 
 
 3,059,383
 3,059,383
 
 3,059,383
Net (loss) income
 
 
 
 
 (34,533,542) (34,533,542) 51,050
 (34,482,492)
Balance at December 29, 201878,522,066
 $785,220
 $334,491,397
 $(17,238,669) $1,554,587
 $(271,730,661) $47,861,874
 $(149,053) $47,712,821
1.For discussion of the correcting adjustments, see Note 18 - Correction of Previously Issued Financial Statements

See Accompanying Notes to Consolidated Financial Statements.

49

34





KOPIN CORPORATION

CONSOLIDATED STATEMENTS OF CASH FLOWS

 2018 2017 2016
Fiscal year ended
(As Revised)1
    
Cash flows from operating activities:     
Net loss$(34,482,492) $(25,380,115) $(23,031,145)
Adjustments to reconcile net loss to net cash used in operating activities:     
Depreciation and amortization1,958,680
 2,501,891
 993,621
Accretion of premium or discount on marketable debt securities15,948
 41,364
 130,032
Stock-based compensation4,791,054
 2,296,131
 2,425,326
Net gain on investment transactions(2,849,816) (2,000,000) (1,034,396)
Deferred income taxes4,185
 (2,421,040) 1,451,858
Foreign currency (gains) losses(1,096,487) 893,260
 711,356
Loss (gain) on sale of property and plant51,159
 
 (7,700,522)
Impairment of assets2,526,669
 
 
Impairment of goodwill1,417,470
 600,086
 
Change in allowance for bad debt(155,000) 13,000
 (17,000)
Other non-cash items832,615
 654,694
 677,330
Change in warranty reserves(79,633) 142,328
 
Changes in assets and liabilities:     
Accounts receivable853,163
 (2,376,593) (39,629)
Contract assets and unbilled receivables865,474
 
 
Inventory(1,656,196) (1,633,027) (1,527,602)
Prepaid expenses, other current assets and other assets113,015
 (1,084,146) 48,295
Accounts payable and accrued expenses(1,208,848) 1,924,751
 1,163,586
Billings in excess of revenue earned(4,742) (85,282) (425,805)
Net cash used in operating activities(28,103,782) (25,912,698) (26,174,695)
Cash flows from investing activities:     
Proceeds from sale of marketable debt securities26,646,078
 37,536,004
 50,835,253
Purchase of marketable debt securities(5,697,329) (19,633,903) (51,828,988)
Proceeds from sale of investments
 
 1,034,396
Cash paid for acquisition, net of cash acquired(1,000,000) (3,690,047) 
Proceeds from sale of III-V product line
 
 15,000,000
Proceeds from sale of property and plant
 
 8,106,819
Other assets(8,373) (140,860) 80,793
Capital expenditures(1,183,131) (2,794,467) (394,897)
Net cash provided by investing activities18,757,245
 11,276,727
 22,833,376
Cash flows from financing activities:     
Sale of unregistered stock
 24,664,250
 
Settlements of restricted stock for tax withholding obligations(208,015) (771,323) (510,597)
Distribution to noncontrolling interest holder(699,105) (791,737) 
Net cash (used in) provided by financing activities(907,120) 23,101,190
 (510,597)
Effect of exchange rate changes on cash(268,223) 560,513
 (93,478)
Net (decrease) increase in cash and cash equivalents(10,521,880) 9,025,732
 (3,945,394)
Cash and cash equivalents at beginning of year24,848,227
 15,822,495
 19,767,889
Cash and cash equivalents at end of year$14,326,347
 $24,848,227
 $15,822,495
Supplemental disclosure of cash flow information:     
Income taxes paid$1,374,000
 $281,000
 $723,000
Construction in progress included in accrued expenses
 212,000
 
1.For discussion of the correcting adjustments, see Note 18 - Correction of Previously Issued Financial Statements

Fiscal year ended 2021  2020  2019 
Cash flows from operating activities:            
Net loss $(13,468,371) $(4,530,925) $(29,374,222)
Adjustments to reconcile net loss to net cash used in operating activities:            
Depreciation and amortization  668,691   651,083   792,221 
Accretion of premium or discount on marketable debt securities  7,517   7,762   21,838 
Stock-based compensation  4,417,422   821,122   2,057,400 
Net (gain) loss on investment transactions  (300,000)  29,356   3,858,453 
Income taxes  128,279   116,536   105,036 
Foreign currency gains  (186,942)  (289,471)  (220,015)
Loss on sale of property and plant  99,228      508,833 
Impairment of goodwill        331,344 
Change in allowance for bad debt  (26,704)  (763,159)  633,131 
Write-off of excess inventory  588,175   667,019   1,834,300 
Change in warranty reserves  9,552   (1,172)  (62,107)
Changes in assets and liabilities:            
Accounts receivable  (3,364,990)  (2,954,703)  (3,944,859)
Contract assets and unbilled receivables  1,379,436   (2,600,671)  2,168,581 
Inventory  (2,728,404)  (1,332,139)  (792,165)
Prepaid expenses, other current assets and other assets  (691,573)  (160,371)  821,340 
Accounts payable and accrued expenses  143,379   5,227,011   (163,084)
Contract liabilities and billings in excess of revenue earned  2,577,523   695,565   397,121 
Net cash used in operating activities  (10,747,782)  (4,417,157)  (21,026,854)
Cash flows from investing activities:            
Proceeds from sale of marketable debt securities  1,100,000   12,148,117   7,454,139 
Equity investments purchase        (2,500,000)
Other assets  (12,822)  193,186   (41,031)
Capital expenditures  (1,033,503)  (542,862)  (170,186)
Net cash provided by investing activities  53,675   11,798,441   4,742,922 
Cash flows from financing activities:            
Sale of treasury stock, net of costs  16,904,173   3,829,462    
Issuance of common stock, net of costs  4,147,200      8,038,529 
Settlements of restricted stock for tax withholding obligations  (602,080)  (139,926)  (45,513)
Net cash provided by financing activities  20,449,293   3,689,536   7,993,016 
Effect of exchange rate changes on cash  (80,124)  12,802   (6,184)
Net increase (decrease) in cash and cash equivalents  9,675,062   11,083,622   (8,297,100)
Cash and cash equivalents at beginning of year  17,112,869   6,029,247   14,326,347 
Cash and cash equivalents at end of year $26,787,931  $17,112,869  $6,029,247 
Supplemental disclosure of cash flow information:            
Construction in progress included in accrued expenses $  $257,000  $ 

See Accompanying Notes to Consolidated Financial Statements.

50

35





NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

1. Summary of Significant Accounting Policies (As Revised)

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. As used in these notes, the terms “we,” “us,” “our,” “Kopin” and the “Company” mean Kopin Corporation and its subsidiaries, unless the context indicates another meaning.

Going Concern

The Company has incurred net losses of $34.5 million, $25.4 million and $23.0 million for the fiscal years ended 2018, 2017 and 2016, respectively, and net cash outflows from operations of $28.1 million, $25.9 million and $26.2 million for the fiscal years ended 2018, 2017 and 2016, respectively. In addition, the Company has continued to experience a significant decline in its cash and cash equivalents and marketable debt securities, which was primarily a result of funding operating losses, of which a significant component relates to the Company’s ongoing investments in the research and development of Wearable products. These negative financial conditions raise substantial doubt regarding the Company’s ability to continue as a going concern. 

The Company’s products are targeted towards the wearable market, which management believes is still developing and cannot predict how long the wearable market will take to develop or if the Company’s products will be accepted.  Accordingly, the Company’s current strategy is to continue to invest in research and development, even during unprofitable periods, which may result in the Company continuing to incur net losses and negative cash flows from operations.  If the Company is unable to achieve and maintain positive cash flows and profitability in the foreseeable future, its financial condition may ultimately be materially adversely affected such that management may be required to reduce operating expenses, including investments in research and development, or raise additional capital. While there can be no assurance the Company will be able to successfully reduce operating expenses or raise additional capital, management believes its historical success in managing cash flows and obtaining capital will continue in the foreseeable future.
The accompanying consolidated financial statements have been prepared on a going concern basis, which contemplates the realization of assets and the satisfaction of liabilities in the normal course of business. These financial statements do not include any adjustments that might result from the outcome of this uncertainty.
Fiscal Year

The Company’s fiscal year ends on the last Saturday in December. The fiscal years ended December 29, 201825, 2021, December 26, 2020, and December 30, 201728, 2019 includes 52 weeks and December 31, 2016 includes 53 weeks and are referred to as fiscal years 2018, 20172021, 2020 and 2016,2019, respectively, herein. The impact of the 53rd week in the 2016Because our fiscal year was not material toends on the Company's resultslast Saturday of operations.December every seven years we have a fiscal year with 53 weeks.

Principles of Consolidation

The consolidated financial statements include the accounts of the Company,Kopin Corporation, its wholly owned subsidiaries and a majority owned 80% subsidiary, eMDT America Inc. ("eMDT"(“eMDT”), located in California (collectively the Company). Net loss attributable to noncontrolling interest in the Company'sCompany’s Consolidated Statement of Operations represents the portion of the results of operations of which is allocated to the shareholders of the equity interests not owned by the Company. All intercompany transactions and balances have been eliminated.

Revenue Recognition - 2018

The Company adoptedaccounts for revenue based on ASU No. 2014-09, Revenue from Contracts with Customers (Topic 606).

 effective December 31, 2017 and applied the modified retrospective method. The Company recognized the cumulative effect of initially applying the new revenue standard as an adjustment to the opening balance of accumulated deficit. The comparative information has not been revised and continues to be reported under the accounting standards in effect for those periods. The Company expects the impact of the adoption of the new standard to be material to the Company's results of operations on an ongoing basis. Significant changes to the Company's accounting policies as a result of adopting Topic 606 are discussed below.

Substantially all of our product revenues are either derived from the sales of components or subassemblies for use in militarydefense applications or our wearable technology components that can be integrated to create industrial and consumer headset systems. We also have development contracts for the design, manufacture and or modification of products for the U.S. government or a prime contractor


36




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

contractors for the U.S. government orand for a customercustomers that sellsexpects to sell into the industrial or consumer markets. The Company'sCompany’s contracts with the U.S. government are typically subject to the Federal Acquisition Regulations (“FAR”) and are priced based on estimated or actual costs of producing goods. The FAR provides guidance on the types of costs that are allowable in establishing prices for goods provided under U.S. government contracts. The pricing for non-U.S. government contracts is based on the specific negotiations with each customer.

Our fixed-price contracts with the U.S. government or other customers may result in revenue recognized in excess of amounts currently billed. We disclose the excess of revenues over amounts actually billed as Contract assets and unbilled receivables on the consolidated balance sheet.sheets. Amounts billed and due from our customers are classified as Accounts receivable on the consolidated balance sheets. In some instances, the U.S. government retains a small portion of the contract price until completion of the contract. The portion of the payments retained until final contract settlement is not considered a significant financing component because the intent is to protect the customer. For contracts with the U.S. government and some commercial customers, we typically receive interim payments either as work progresses or by achieving certain milestones or based on a schedule in the contract. We recognize a liability for these advance payments in excess of revenue recognized and present it as Contract liabilities and billings in excess of revenue earned on the consolidated balance sheets. The advanced payment typically is not considered a significant financing component because it is used to meet working capital demands that can be higher in the early stages of a contract and to protect us from the other party failing to adequately complete some or all of its obligations under the contract. For industrial and consumer purchase orders, we typically receive payments within 30 to 60 days of shipments of the product, although for some purchase orders, we may require an advanced payment prior to shipment of the product.

51

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

To determine the proper revenue recognition method for contracts with the same customer, we evaluate whether two or more contracts should be combined and accounted for as one single contract and whether the combined or single contract should be accounted for as more than one performance obligation. For most of our development contracts and contracts with the U.SU.S. government, the customer contracts with us to provide a significant service of integrating a set of components into a single unit. Hence, the entire contract is accounted for as one performance obligation. Less frequently, however, we may promise to provide distinct goods or services within a contract in which case we separate the contract into more than one performance obligation. If a contract is separated into more than one performance obligation, we allocate the total transaction price to each performance obligation in an amount based on the estimated relative standalone selling prices of the promised goods or services underlying each performance obligation. In cases where we sell standard products, the observable standalone sales are used to determine the standalone selling price.

The Company recognizes revenue from a contract when it has approval and commitment from both parties, the rights of the parties are identified, payment terms are identified, the contract has commercial substance and collectability of consideration is probable.

Commencing in 2018 forFor certain contracts with the U.S. government, the Company recognizes revenue over time as we perform because of continuous transfer of control to the customer and the lack of an alternative use for the product. The continuous transfer of control to the customer is supported by liability clauses in the contract that allow the U.S. government to unilaterally terminate the contract for convenience, pay us for costs incurred plus a reasonable profit and take control of any work in process. For contracts with commercial customers, while the contract may have a similar liability clause, our products historically have an alternative use and thus, revenue is recognized at a point in time.

In situations where control transfers over time, revenue is recognized based on the extent of progress towards completion of the performance obligation. We generally use the cost-to-cost approach to measure the extent of progress towards completion of the performance obligation for our contracts because we believe it best depicts the transfer of assets to the customer. Under the cost-to-cost measure approach, the extent of progress towards completion is measured based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligation. Revenues are recorded proportionally as costs are incurred.

Accounting for design, development and production contracts requires judgment relative to assessing risks, estimating contract revenues and costs, and making assumptions for schedule and technical issues. Due to the size and nature of the work required to be performed on many of our contracts, the estimation of total revenue and cost at completion is complicated and subject to many variables. Contract costs include material, labor and subcontracting costs, as well as an allocation of indirect costs. We have to make assumptions regarding the number of labor hours required to complete a task, the complexity of the work to be performed, the availability and cost of materials, and performance by our subcontractors. For contract change orders, claims or similar items, we apply judgment in estimating the amounts and assessing the potential for realization. These amounts are only included in contract value when they can be reliably estimated and realization is considered probable. If our estimate of total contract costs or our determination of whether the customer agrees that a milestone is achieved is incorrect, our revenue could be overstated or understated and the profits or loss reported could be subject to adjustment.


37




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

For our commercial customers, the Company'sCompany’s revenue is recognized when obligations under the terms of a contract with our customer is satisfied and the Company transfers control of the products or services, which is generally upon delivery to the customer. Revenue is recorded as the amount of consideration we expect to receive in exchange for transferring goods or providing services. Provisions for product returns and allowances are reductions in the transaction price and are recorded in the same period as the related revenues. We analyze historical returns, current economic trends and changes in customer demand when evaluating the adequacy of sales returns and other allowances. Certain product sales are made to distributors under agreements allowing for a limited right of return on unsold products. Sales to distributors are primarily made for sales to the distributors'distributors’ customers and not for stocking of inventory. Sales, value add and other taxes we collect concurrent with revenue-producing activities are excluded from revenue.

52

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

The rights and benefits to the Company'sCompany’s intellectual property are conveyed to certain customers through technology license agreements. These agreements may include other performance obligations including the sale of product to the customer. When the license is distinct from other obligations in the agreement, the Company treats the license and other performance obligations as separate performance obligations. Accordingly, the license is recognized at a point in time or over time based on the standalone selling price. The sale of materials is recognized at a point in time, which occurs with the transfer of control of the Company'sCompany’s products or services. In certain instances, the Company is entitled to sales-based royalties under license agreements. These sales-based royalties are recognized when they are earned. Revenues from sales-based royalties under license agreements are shown under Research and development and other revenues on the Company'sCompany’s Consolidated Statements of Operations.

The cumulative effect of the changes made to the Company's consolidated December 31, 2017 balance sheet for the adoption of ASU 2014-09, Revenue from Contracts with Customers (Topic 606) was as follows:

Balance SheetBalance at December 30, 2017 Adjustments due to Topic 606 Balance at December 31, 2017
Assets     
Contract assets and unbilled receivables$704,863
 $2,850,274
 $3,555,137
Inventory5,080,797
 (1,082,629) 3,998,168
Other assets3,842,068
 400,000
 4,242,068
      
Liabilities     
Contract liabilities and billings in excess of revenue earned1,555,883
 (891,737) 664,146
      
Stockholders’ equity     
Accumulated Deficit1
$(240,256,502) $3,059,383
 $(237,197,119)
1.For discussion of the correcting adjustments, see Note 18 - Correction of Previously Issued Financial Statements
In accordance with the new revenue standard requirements, the impact of adoption on the Company's consolidated statement of operations for the fiscal year 2018 was as follows:
Statement of OperationsAs Reported 
Balances Without Adoption of
Topic 606
 Effect of Change Higher/(Lower)
Net product revenues$19,211,115
 $19,726,901
 $(515,786)
Research and development and other revenues5,253,890
 5,600,066
 (346,176)
Cost of product revenues15,831,441
 16,809,343
 (977,902)
Net loss attributable to Kopin Corporation$(34,533,542) $(34,649,482) $115,940

See Note 14. Segments and Disaggregation of Revenue for additional information regarding the disaggregation of the Company's revenue by major source.
Contract Assets

Contract assets include unbilled amounts typically resulting from sales under contracts when the cost-to-cost method of revenue recognition is utilized and revenue recognized from customer arrangements, including licensing, exceeds the amount billed to the customer, and right to payment is not just subject to the passage of time. Amounts may not exceed their net realizable value. Contract assets are generally classified as current. The Company classifies the noncurrent portion of contract assets under other assets in its condensed consolidated balance sheets.


38




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

Contract Liabilities

Contract liabilities consist of advance payments and billings in excess of revenue recognized for the contract.

Performance Obligations

The Company'sCompany’s revenue recognition related to performance obligations that were satisfied at a point in time and over time were as follows:

Fiscal year ended2018 2017 2016
Point in time60% 91% 95%
Over time40% 9% 5%


Schedule of Satisfaction of Performance Obligations

Fiscal year ended 2021  2020  2019 
Point in time  31%  34%  64%
Over time  69%  66%  36%

The value of remaining performance obligations representrepresents the transaction price of orders for which work has not been performed and excludes unexercised contract options and potential orders under ordering-type contracts (e.g., indefinite-delivery, indefinite-quantity ("IDIQ"(“IDIQ”)). As of December 29, 2018,25, 2021, the aggregate amount of the transaction price allocated to remaining performance obligations was $8.0 million. The$28.8 million, which the Company expects to recognize revenue on the remaining performance obligations of $8.0 million over the next 12 months. The remaining performance obligations represent amounts to be earned under government contracts, which are subject to cancellation.

53
Revenue Recognition - 2017

We recognize revenue if four basic criteria have been met: (1) persuasive evidence of an arrangement exists; (2) delivery has occurred and services rendered; (3) the price to the buyer is fixed or determinable; and (4) collectability is reasonably assured. We do not recognize revenue for products prior to customer acceptance unless we believe the product meets all customer specifications and has a history of consistently achieving customer acceptance of the product. Provisions for product returns and allowances are recorded in the same period as the related revenues. We analyze historical returns, current economic trends and changes in customer demand and acceptance of product when evaluating the adequacy of sales returns and other allowances. Certain product sales are made to distributors under agreements allowing for a limited right of return on unsold products. Sales to distributors are primarily made for sales to the distributors' customers and not for stocking of inventory. We delay revenue recognition for our estimate of distributor claims of right of return on unsold products based upon our historical experience with our products and specific analysis of amounts subject to return based upon discussions with our distributors or their customers.
We recognize revenues from long-term research and development government contracts on the percentage-of-completion method of accounting as work is performed, based upon the ratio of costs or hours already incurred to the estimated total cost of completion or hours of work to be performed. Revenue recognized at any point in time is limited to the amount funded by the U.S. government or contracting entity. We recognize revenue for product development and research contracts that have established prices for distinct phases when delivery and acceptance of the deliverable for each phase has occurred. In some instances, we are contracted to create a deliverable which is anticipated to go into full production. In those cases, we discontinue the percentage-of-completion method after formal qualification of the deliverable has been completed and revenue is then recognized based on the criteria established for sale of products. In certain instances, qualification may be achieved and delivery of production units may commence however our customer may have either identified new issues to be resolved or wish to incorporate a newer display technology. In these circumstances new units delivered will continue to be accounted for under the criteria established for sale of products. Under certain of our research and development contracts, we recognize revenue using a milestone methodology. This revenue is recognized when we achieve specified milestones based on our past performance.
We classify amounts earned on contracts in progress that are in excess of amounts billed as unbilled receivables and we classify amounts received in excess of amounts earned as billings in excess of revenues earned. We invoice based on dates specified in the related agreement or in periodic installments based upon our invoicing cycle. We recognize the entire amount of an estimated ultimate loss in our financial statements at the time the loss on a contract becomes known.
Accounting for design, development and production contracts requires judgment relative to assessing risks, estimating contract revenues and costs, and making assumptions for schedule and technical issues. Due to the size and nature of the work required to be performed on many of our contracts, the estimation of total revenue and cost at completion is complicated and subject to many variables. Contract costs include material, labor and subcontracting costs, as well as an allocation of indirect costs. We have to make assumptions regarding the number of labor hours required to complete a task, the complexity of the work to be performed, the availability and cost of materials, and performance by our subcontractors. For contract change orders, claims or similar items, we apply judgment in estimating the amounts and assessing the potential for realization. These amounts are only included in contract value when they can be reliably estimated and realization is considered probable. We

39




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)


have accounting policies in place to address these as well as other contractual and business arrangements to properly account for long-term contracts. If our estimate of total contract costs or our determination of whether the customer agrees that a milestone is achieved is incorrect, our revenue could be overstated and profits would be negatively impacted.

Research and Development Costs

Research and development expenses are incurred in support of internal display product development programs or programs funded by agencies or prime contractors of the U.S. government and commercial partners. Research and development costs include staffing, purchases of materials and laboratory supplies, circuit design costs, fabrication and packaging of experimental display products, and overhead, and are expensed immediately.

Cash and Cash Equivalents

The Company considers all highly liquid, short-term debt instruments with original maturities of three months or less to be cash equivalents.

Marketable Debt Securities

Marketable debt securities consist primarily of commercial paper, medium-term corporate notes, and U.S. government and agency backed securities. The Company classifies these marketable debt securities as available-for-sale at fair value in “Marketable debt securities, at fair value” in the consolidated balance sheets. The Company records the amortization of premium and accretion of discounts on marketable debt securities in the results of operations.

The Company uses the specific identification method as a basis for determining cost and calculating realized gains and losses with respect to marketable debt securities. The gross gains and losses realized related to sales and maturities of marketable debt securities were not material during the fiscal years ended 2021, 2020 and 2019.

Fair Value of Financial Instruments

Financial instruments consist of marketable debt securities, accounts receivable and certain current liabilities. These assets (excluding marketable securities which are recorded at fair value) and liabilities are carried at cost, which approximates fair value.

Inventory

Inventories are stated at standard cost adjusted to approximate the lower of cost (first-in, first-out method) or net realizable value. The Company adjusts inventory carrying value for the estimated obsolescence equal to the difference between the cost of inventory and the estimated net realizable value based upon assumptions about future demand and market conditions. The Company fully reserves for inventories and non-cancellable purchase orders for inventory deemed obsolete. The Company performs periodic reviews of inventory items to identify excess inventories on hand by comparing on-hand balances to anticipated usage using recent historical activity as well as anticipated or forecasted demand. If estimates of customer demand diminish further or market conditions become less favorable than those projected by the Company, additional inventory adjustments may be required.

We regularly review inventory quantities on-hand and we write down inventory based on excess or obsolete inventories determined primarily by future anticipated demand for our products. Inventory write-downs are measured as the difference between the cost of the inventory and net realizable value, based upon assumptions about future demand, which are inherently difficult to assess and dependent on market conditions. At the point of a loss recognition, a new, lower cost basis for that inventory is established, and subsequent changes in facts and circumstances do not result in the restoration or increase in that newly established basis.

Inventory consists of the following at December 29, 201825, 2021 and December 30, 2017:26, 2020:

Schedule of Inventory

  2021  2020 
Raw materials $5,044,334  $3,609,710 
Work-in-process  1,032,519   565,986 
Finished goods  504,286   280,060 
Total $6,581,139  $4,455,756 

54
 2018 2017
Raw materials$2,548,139
 $2,070,153
Work-in-process1,526,552
 1,829,805
Finished goods722,547
 1,180,839
 $4,797,238
 $5,080,797


NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

Property, Plant and Equipment

Property, plant and equipment are recorded at cost. Depreciation and amortization are provided using the straight-line method over the estimated useful lives of the assets, generally 3 to 10 years. Leasehold improvements and leased equipment are amortized over the shorter of the term of the lease or the useful life of the improvement or equipment. As discussed below, obligations for asset retirement are accrued at the time property, plant and equipment is initially purchased or as such obligations are generated from use.

Collaborative Arrangements

Recognition and Measurement of Financial Assets and Liabilities

We periodically make equity investments in private companies, accounted for as an equity investment, whose values are difficult to determine. The Company evaluates whether an arrangementuses the measurement alternative for equity investments without readily determinable fair values which is a collaborative arrangement underoften referred to as cost method investments. When assessing investments in private companies for impairment, we consider such factors as, among other things, the Financial Accounting Standards Board (the “FASB”) Accounting Standards Codification (“ASC”) Topic 808Collaborative Arrangements, at its inception based onshare price from the facts and circumstances specific toinvestee’s latest financing round, the arrangement. The Company also reevaluates whether an arrangement qualifies or continues to qualify as a collaborative arrangement whenever there is a change in either the rolesperformance of the participants orinvestee in relation to its own operating targets and its business plan, the participants’ exposure to significant risksinvestee’s revenue and rewards dependent oncost trends, the ultimate commercial successliquidity and cash position, including its cash burn rate and market acceptance of the endeavor. For those collaborative arrangements where it is determined thatinvestee’s products and services. Because these are private companies which we do not control, we may not be able to obtain all of the Company isinformation we would want in order to make a complete assessment of the principal participant, costs incurred and revenue generated from third parties are recordedinvestment on a gross basis in the financial statements.


40




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

From time to time, the Company enters into collaborative arrangements for the research and development, manufacture and/or commercialization of products. The Company’s collaboration agreements with third parties are performed ontimely basis. Accordingly, our estimates may be revised if other information becomes available at a ‘‘best efforts’’ basis with no guarantee of either technological or commercial success.
later date.

Product Warranty

The Company generally sells products with a limited warranty of product quality and a limited indemnification of customers against intellectual property infringement claims related to the Company’s products. The Company accrues for known warranty and indemnification issues if a loss is probable and can be reasonably estimated and accrues for estimated incurred but unidentified issues based on historical activity. Accrued warranty costs and warranty claims are not material in the periods presented.

Extended

 

Extended Warranties

The Company recognizes revenue from an extended warranty on the straight-line method over the life of the extended warranty, which is typically 12 to 18 months beyond the standard 12 month warranty. The Company classifies the current portion of extended warranties under contract liabilities and billings in excess of revenue earned and the noncurrent portion of extended warranties under contract liabilities, noncurrent in its consolidated balance sheets. The Company currently hashad approximately $0.4 millionless than $10,000 of contract liabilities related to extended warranties at December 29, 2018.

25, 2021 and December 26, 2020.

Asset Retirement Obligations

The Company recorded asset retirement obligations ("ARO"(“ARO”) liabilities of $0.3$0.3 million at December 29, 201825, 2021 and December 30, 2017.26, 2020. This represents the legal obligations associated with retirement of the Company’s assets when the timing and/or method of settling the obligation are conditional on a future event that may or may not be within the control of the Company. Changes in ARO liabilities for fiscal years 20182021 and 20172020 are as follows:

Schedule of Changes in Asset Retirement Obligations

  2021  2020 
Beginning balance $271,340  $261,883 
Exchange rate change  (3,370)  9,457 
Ending balance $267,970  $271,340 

 2018 2017
Beginning balance$269,877
 $246,922
Exchange rate change(15,779) 22,955
Ending balance$254,098
 $269,877

55

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

Income Taxes

The consolidated financial statements reflect provisions for federal, state, local and foreign income taxes. The Company recognizes deferred tax assets and liabilities for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax basis, as well as operating loss and tax credit carryforwards. The Company measures deferred tax assets and liabilities using enacted tax rates expected to apply to taxable income in the years in which those temporary differences and carryforwards are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. The Company provides valuation allowances if, based on the weight of available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized.


The 2017 Act imposes a U.S. tax on global intangible low taxed income (“GILTI”) that is earned by certain foreign affiliates owned by a U.S. shareholder. The Company has made a policy election to treat future taxes related to GILTI as a current period expense in the reporting period in which the tax is incurred.

Foreign Currency

Assets and liabilities of non-U.S. operations where the functional currency is other than the U.S. dollar are translated from the functional currency into U.S. dollars at year end exchange rates, and revenues and expenses are translated at average rates prevailing during the year. Resulting translation adjustments are accumulated as part of accumulated other comprehensive income. Transaction gains or losses are recognized in income or loss in the period in which they occur.

Net Loss Per Share

Basic net loss per share is computed using the weighted-average number of shares of common stock outstanding during the period less any unvested restricted shares. Diluted net loss per share is calculated using weighted-average shares outstanding and contingently issuable shares, less weighted-average shares reacquired during the period. The net outstanding shares are adjusted for the dilutive effect of shares issuable upon the assumed conversion of the Company’s common stock equivalents, which consist of outstanding stock options and unvested restricted stock.

The following were not included in weighted-average common shares outstanding-diluted because they are anti-dilutive or performance conditions have not been met at the endanti-dilutive:

Schedule of the period:


41




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

 2018 2017 2016
Nonvested restricted common stock2,213,249
 2,629,274
 3,007,674
Anti-dilutive Securities Excluded from Computation of Earnings Per Share

  2021  2020  2019 
Nonvested restricted common stock  2,077,592   3,051,874   1,863,124 


Concentration of Credit Risk

Financial instruments that potentially subject the Company to concentration of credit risk other than marketable securities consist principally of trade accounts receivable. Trade receivables are primarily derived from sales to manufacturers of consumer electronic devices and wireless components or militarydefense applications. The Company sells its products to customers worldwide and generally does not require collateral. The Company maintains a reserve for potential credit losses.

The Company primarily invests its excess cash in government backed and corporate debt securities that management believes to be of high credit worthiness, which bear lower levels of relative credit risk. The Company relies on rating agencies to ascertain the credit worthiness of its marketable securities and, where applicable, guarantees made by the Federal Deposit Insurance Company.

Fair Value of Financial Instruments
Financial instruments consist of marketable debt securities, accounts receivable and certain current liabilities. These assets (excluding marketable securities which are recorded at fair value) and liabilities are carried at cost, which approximates fair value.
Recognition and Measurement of Financial Assets and Liabilities
We periodically make equity investments in private companies, accounted for as an equity investment, whose values are difficult to determine. The Company adopted ASU No. 2016-01, Financial Instruments - Overall (Subtopic 825-10): Recognition and Measurement of Financial Assets and Liabilities

 and the related amendments on December 31, 2017. This standard amends various aspects of the recognition, measurement, presentation, and disclosure of financial instruments. The Company adopted the measurement alternative for equity investments without readily determinable fair values (often referred to as cost method investments) on a prospective basis. When assessing investments in private companies for impairment, we consider such factors as, among other things, the share price from the investee's latest financing round, the performance of the investee in relation to its own operating targets and its business plan, the investee's revenue and cost trends, the liquidity and cash position, including its cash burn rate and market acceptance of the investee's products and services. Because these are private companies which we do not control we may not be able to obtain all of the information we would want in order to make a complete assessment of the investment on a timely basis. Accordingly, our estimates may be revised if other information becomes available at a later date.

Marketable Debt Securities
Marketable debt securities consist primarily of commercial paper, medium-term corporate notes, and U.S. government and agency backed securities. The Company classifies these marketable debt securities as available-for-sale at fair value in “Marketable debt securities, at fair value”. The Company's investment in GCS Holdings is included in "Other Assets" as available-for-sale and at fair value. The Company records the amortization of premium and accretion of discounts on marketable debt securities in the results of operations.
The Company uses the specific identification method as a basis for determining cost and calculating realized gains and losses with respect to marketable debt securities. The gross gains and losses realized related to sales and maturities of marketable debt securities were not material during the fiscal years ended 2018, 2017 and 2016.

Other-than-Temporary Impairments

The Company conducts a review of its marketable debt securities on a quarterly basis for the presence of other-than-temporary impairment ("OTTI"(“OTTI”). The Company assesses whether OTTI is present when the fair value of a debt security is less than its amortized cost basis at the balance sheet date. Under these circumstances OTTI is considered to have occurred (1) if the Company intends to sell the security before recovery of its amortized cost basis; (2) if it is “more likely than not” the Company will be required to sell the security before recovery of its amortized cost basis; or (3) the present value of expected cash flows is not sufficient to recover the entire amortized cost basis.

56

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

The Company further estimates the amount of OTTI resulting from a decline in the creditworthiness of the issuer (credit-related OTTI) and the amount of non credit-related OTTI. Non credit-related OTTI can be caused by such factors as market illiquidity. Credit-related OTTI is recognized in earnings while non credit-related OTTI on securities not expected to be sold is


42




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

recognized in other comprehensive income (loss). The Company recorded a gain of approximately $0.2 million in fiscal year 2020 from the reversal of an OTTI previously recorded. The Company did not record any OTTI for the fiscal years 2018, 20172021, 2020 and 2016.
2019.

Stock-Based Compensation

The fair value of nonvested restricted common stock awards is generally the quoted price of the Company’s equity shares on the date of grant. The nonvested restricted common stock awards require the employee to fulfill certain obligations, including remaining employed by the Company for periods ranging from one two or fourto five years (the vesting period) and in certain cases also require meeting either performance criteria or market condition. The performance criteria primarily consist of the achievement of established milestones. For nonvested restricted common stock awards which solely require the recipient to remain employed with the Company, the stock compensation expense is amortized over the anticipated service period. For nonvested restricted common stock awards which require the achievement of performance criteria, the Company reviews the probability of achieving the performance goals on a periodic basis. If the Company determines that it is probable that the performance criteria will be achieved, the amount of compensation cost derived for the performance goal is amortized over the service period. If the performance criteria are not met, no compensation cost is recognized, and any previously recognized compensation cost is reversed. The Company recognizes compensation costs on a straight-line basis over the requisite service period for time vested awards.

The value of restricted stock grants that vest based on market conditions is computed on the date of grant using the Monte Carlo model. The fair value of stock option awards is estimated on the date of grant using the Black-Scholes-Merton option-pricing model. There were no stock options granted in fiscal years 2018, 20172021, 2020 or 2016.

2019.

Comprehensive Loss

Comprehensive loss is the total of net (loss) income and all other non-owner changes in equity including such items as unrealized holding (losses) gains on marketable equity and debt securities classified as available-for-sale and foreign currency translation adjustments.

The components of accumulated other comprehensive income are as follows:

 
Cumulative
Translation
Adjustment
 Unrealized holding (loss) gain on marketable securities Reclassifications of gain (loss) in net loss 
Accumulated Other
Comprehensive
Income
Balance as of December 26, 2015$566,025
 $205,749
 $
 $771,774
Changes during year814,017
 33,464
 (48,284) 799,197
Balance as of December 31, 20161,380,042
 239,213
 (48,284) 1,570,971
Changes during year1,851,664
 148,520
 (6,376) 1,993,808
Balance as of December 30, 20173,231,706
 387,733
 (54,660) 3,564,779
Changes during year(1,794,768) (264,949) 49,525
 (2,010,192)
Balance as of December 29, 2018$1,436,938
 $122,784
 $(5,135) $1,554,587


Schedule of Accumulated Other Comprehensive Income

  Cumulative Translation Adjustment  Unrealized holding gain (loss) on marketable securities  Reclassifications of loss of marketable securities in net loss  Accumulated Other Comprehensive Income 
Balance as of December 29, 2018 $1,436,938   122,784   (5,135)  1,554,587 
Changes during year  (206,580)  446,533   (37,356)  202,597 
Balance as of December 28, 2019  1,230,358   569,317   (42,491)  1,757,184 
Changes during year  (67,852)  (183,870)  (21,028)  (272,750)
Balance as of December 26, 2020  1,162,506  $385,447  $(63,519) $1,484,434 
Changes during year  (51,736)  (17,113)  (1,234)  (70,083)
Balance as of December 25, 2021 $1,110,770  $368,334  $(64,753) $1,414,351 

Goodwill

We account for goodwill in accordance with ASC Topic 350. Under ASC Topic 350, goodwill is considered to have an indefinite life, and is carried at cost. Goodwill is not amortized, but is subject to an annual impairment test, as well as between annual tests when events or circumstances indicate that the carrying value may not be recoverable.

57

The determination of reporting units under ASC 350 begins with the definition of an operating segment in ASC 280 and takes into account the disaggregation of that operating segment into economically dissimilar components for goodwill impairment testing purposes.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

The level at which operating performanceCompany’s policy is reviewed also differs between ASC 280 and ASC 350. The chief operating decision maker ("CODM") is the Company's Chief Executive Officer who reviews operating segments and the segment manager reviews reporting units (components of operating segments). Therefore, a component of an operating segment would not be considered an operating segment under ASC 280 unless the CODM regularly reviews its operating performance. However, that same component might be a reporting unit under ASC 350 if a segment manager regularly reviews its operating performance (and if the other reporting unit criteria are met). Goodwill is evaluated for impairment annually or more often if indicators of a potential impairment are present. The Company performsto perform impairment tests of goodwill at its reporting unit level.level when applicable. The goodwill valuations that are utilized to test these assets for impairment are dependingdepend on a number of significant estimates and assumptions, including macroeconomic conditions, overall growth rates, competitive activities, cost containment, Company business plans and the discount rate applied to cash flows. We believe these estimatesAs of December 25, 2021 and assumptions are reasonable and are comparable to those that would be used by other market participants. However, actual events and results


43




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

could differ substantially from those used in our valuations. ToDecember 26, 2020, the extent such factors result in a failure to achieve the level of projected cash flows initially used to estimate fair value for purposes of establishing the carrying amountending balance of goodwill and intangibles, we may need to record non-cash impairment charges in the future.  
was 0.

Impairment of Long-Lived Assets

The Company periodically reviews the carrying value of its long-lived assets to determine if facts and circumstances suggest that they may be impaired or that the amortization or depreciation period may need to be changed. The carrying value of a long-lived asset is considered impaired when the anticipated identifiable undiscounted cash flows from such asset are less than its carrying value. For assets that are to be held and used, impairment is measured based upon the amount by which the carrying amount of the asset exceeds its fair value.

Recently Issued

Leases

The Company accounts for leases under standard Accounting Pronouncements

Leases
In February 2016, the FASB issued ASU Standards Update (“ASU”) 2016-02, Leases (Topic 842), which requires lessees to recognize a right-of-use asset and lease liability for most lease arrangements.. The new standard is effective for fiscal years beginning after December 15, 2018, with early adoption permitted. In July 2018, the FASB issued ASU 2018-11, Leases (Topic 842): Targeted Improvements, which allows for an additional transition method under the modified retrospective approach for the adoption of Topic 842. The two permitted transition methods are now: (1) to apply the new lease requirements at the beginning of the earliest period presented, and (2) to apply the new lease requirements at the effective date. Under both transition methods there is a cumulative effect adjustment. We intend to adopt the standard on the effective date of December 30, 2018 by applying the new lease requirements at the effective date. We also intend to electCompany used the package of practical expedients permitted under the transition guidance within the new standard, which, among other things, allows usit to carry forward the historical lease classification. We have evaluatedThe Company did not elect the changes from this ASUpractical expedient to ouruse hindsight in determining the lease term and in assessing impairment of right-of-use assets.

The Company determines if an arrangement is a lease or contains an embedded lease at inception. For lease arrangements with both lease and non-lease components (e.g., common-area maintenance costs), the Company accounts for the non-lease components separately.

All of the Company’s leases are operating leases. Operating lease right-of-use assets and operating lease liabilities are recognized based on the present value of future financial reportinglease payments over the lease term at the commencement date. The operating lease right-of-use assets also includes any initial direct costs and disclosures,any lease payments made at or before the commencement date and have designedis reduced for any unrestricted incentives received at or before the commencement date.

For the majority of the Company’s leases, the discount rate used to determine the present value of the lease payments is the Company’s incremental borrowing rate at the lease commencement date, as the implicit rate is not readily determinable. The discount rate represents a risk-adjusted rate on a secured basis and implemented related processesis the rate at which the Company would borrow funds to satisfy the scheduled lease liability payment streams commensurate with the lease term. For new or renewed leases, the discount rate is determined using available data at lease commencement and controlsbased on the lease term including any reasonably certain renewal periods.

Some of the Company’s leases include options to addressextend or terminate the lease. The Company includes these changes. We expect the standard will resultoptions in the recognition of right-of-usethe Company’s ROU assets of $3.5 million to $4.0 million and lease liabilities when it is reasonably certain that the Company will exercise the option. In most cases, the Company has concluded that renewal and early termination options are not reasonably certain of $3.5 millionbeing exercised by the Company (and thus not included in our ROU asset and lease liability) unless there is an economic, financial or business reason to $4.0 milliondo so. None of our leases include variable lease-related payments, such as escalation clauses based on the consumer price index (“CPI”) rates or residual guarantees.

58

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

Recently Issued Accounting Pronouncements

In June 2016, the FASB issued ASU 2016-13, Financial Instruments-Credit Losses (Topic 326): Measurement of December 30, 2018, with immaterial changesCredit Losses on Financial Instruments. The amendments in ASU 2016-13 will provide more decision-useful information about the expected credit losses on financial instruments and other commitments to other balance sheet accounts.extend credit held by a reporting entity at each reporting date. The standard will have no impact on our results of operations or liquidity. In addition, new disclosures will be provided to enable users to assess the amount, timing and uncertainty of cash flows arising from leases.

Other new pronouncements issued but notASU is effective untilfor annual reporting periods beginning after December 29, 2018 are not expected15, 2019, including interim periods within that year. Following the release of ASU 2019-10 in November 2019, the new effective date, as long as the Company remains a smaller reporting company, would be annual reporting periods beginning after December 15, 2022. The Company is currently evaluating the impact, if any, the adoption of ASU 2016-13 may have on its consolidated financial statements.

In December 2019, the FASB issued ASU 2019-12, Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes. The amendments in ASU 2019-12 provide for simplified accounting to have aseveral income tax situations and removal of certain accounting exceptions. The ASU is effective for annual reporting periods beginning after December 15, 2020, including interim periods within those periods. Their was no material impact on ourto the Company’s consolidated financial position, resultsstatements as a result of operations or liquidity.


the adoption of ASU 2019-12.

2. Property, Plant and Equipment

Property, plant and equipment consisted of the following at December 29, 201825, 2021 and December 30, 201726, 2020:

:Schedule of Property Plant and Equipment

 Useful Life 2018 2017
Equipment3-5 years $16,824,384
 $16,811,526
Leasehold improvementsLife of the lease 3,676,775
 3,851,269
Furniture and fixtures3 years 523,736
 531,870
Equipment under construction  436,806
 2,415,957
   21,461,701
 23,610,622
Accumulated depreciation and amortization  (18,862,859) (18,533,579)
Property, plant and equipment, net  $2,598,842
 $5,077,043

  Useful Life 2021  2020 
Equipment 3-5 years $15,099,035  $15,031,726 
Leasehold improvements   Life of the lease  3,571,694   3,574,103 
Furniture and fixtures 3 years  101,777   101,777 
Equipment under construction    233,237   374,010 
Property, plant and equipment, gross    19,005,743   19,081,616 
Accumulated depreciation and amortization    (17,116,780)  (17,454,686)
Property, plant and equipment, net   $1,888,963  $1,626,930 


Depreciation expense for the fiscal years 2018, 20172021, 2020 and 20162019 was approximately $0.7 $1.0million, $0.7 $0.9million and $0.8$1 million, respectively.

During the fiscal year 2018,

3. Leases

The Company enters into operating leases primarily for manufacturing, engineering, research, administration and sales facilities, and information technology (“IT”) equipment. At December 25, 2021 and December 26, 2020, the Company recorded asset impairment chargesdid not have any finance leases. Almost all of $2.5 million associated with equipment that either is not currently being utilizedour future lease commitments, and related lease liability, relate to the Company’s facility leases. Some of the Company’s leases include options to extend or will not be utilized for its remaining useful life and is not recoverable.terminate the lease.

Schedule of Lease Expense

  2021  2020 
Operating lease cost $1,131,998   1,155,967 

59


44




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)


3.    

At December 25, 2021, the Company’s future lease payments under non-cancellable leases were as follows:

Schedule of Future Lease Payment Under Non-cancellable Lease

   2021 
2022  915,661 
2023  858,941 
2024  769,923 
2025  604,000 
2026  604,000 
Thereafter  805,333 
Total future lease payments  4,557,858 
Less imputed interest  (748,418)
Total $3,809,440 

Supplemental cash flow information related to leases was as follows:

Schedule of Supplemental Information Related To Leases

  2021  2020 
Cash paid for amounts included in the measurement of operating lease liabilities $1,157,060  1,196,386 

Other information related to leases was as follows:

  2021  2020 
Weighted Average Discount Rate—Operating Leases  5.89%  6.15%
Weighted Average Remaining Lease Term—Operating Leases (in years)  5.71   2.22 

4. Contract Assets and Liabilities

Net contract assets (liabilities) consisted of the following:

 December 29, 2018 December 31, 2017 $ Change % Change
Contract assets and unbilled receivables$3,089,663
 $3,555,137
 $(465,474) (13)%
Contract liabilities and billings in excess of revenue earned(388,933) (664,146) 275,213
 (41)%
Contract liabilities, noncurrent(17,294) (374,171) 356,877
 (95)%
Net contract assets$2,683,436
 $2,516,820
 $166,616
 7 %


Schedule of Contract with Customer, Asset and Liability

  December 25, 2021  December 26, 2020  $ Change  % Change 
Contract assets and unbilled receivables $2,299,392  $3,521,753  $(1,222,361)  (35)%
Contract liabilities and billings in excess of revenue earned  (4,063,031)  (1,493,847)  (2,569,184)  172%
Contract liabilities, noncurrent  (20,664)  (5,069)  (15,595)  308%
Net contract assets $(1,784,303) $2,022,837  $(3,807,140)  (188)%

The $0.2$3.8 million increasedecrease in the Company'sCompany’s net contract assets from December 31, 201726, 2020 to December 29, 201825, 2021 was primarily due to ourchanges in its fixed-price contracts with the U.S. government that resulted in revenue recognizedbillings in excess of amounts billedrevenue recognized and the adoption of Topic 606.

product revenue recognized over time for defense programs.

The Company recognized revenue of approximately $0.3$1.5 million and $0.4$0.6 million related to our contract liabilities at December 31, 201725, 2021 and January 1, 2017,December 26, 2020, respectively.

The Company did not recognize impairment losses on our contract assets during the years ended December 29, 201825, 2021 and December 30, 2017.

4.    26, 2020.

5. Business Combinations

In March 2017, we purchased 100% of the outstanding stock of NVIS, Inc. ("NVIS") for $3.7 million. NVIS producesa producer of virtual reality systems for 3D applications. Additional payments by the Company of up to $2.0 million may be required if certain future operating performance milestones are met and the selling shareholders remain employed with NVIS through March 2020. As there is a requirement to remain employed to earn the contingent payments, these contingent payments will be treated as compensation expense.

The identifiable assets acquired and liabilities assumed at the acquisition date have been recognized at fair value. The allocationpart of the purchase, pricewe paid $1.8 million in contingent consideration through March 28, 2020. There are no remaining contingent payment obligations related to the NVIS purchase as of the acquisition date is as follows:
Cash and marketable securities$2,600
Accounts receivable490,700
Inventory768,400
Other identifiable assets46,800
Order backlog840,000
Customer relationships1,000,000
Developed technology460,000
Trademark portfolio160,000
Current liabilities(480,500)
Net deferred tax liabilities(1,084,000)
Goodwill1,489,000
Total$3,693,000
December 25, 2021.


Goodwill represents the recording of the excess of the purchase price over the fair values of the net tangible assets acquired. No significant adjustments were recorded to the purchase price allocation during the measurement period. During the fourth quarter of 2017, we finalized the fair values of the acquired assets and liabilities.
The identified intangible assets are being amortized on a straight-line basis over the following lives, in years:

Order backlog1
Customer relationships2
Developed technology2
Trademark portfolio260



45




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)


In conjunction with the acquisition, the Company recorded deferred tax liabilities of approximately $1.1 million associated with the future non-deductible amortization of the intangible assets. These deferred tax liabilities can be used to offset the Company’s net deferred tax assets. The Company reduced the valuation allowance on its net deferred tax assets in the amount of $1.1 million and such reduction was recognized as a benefit for income taxes for 2017. Acquisition expenses were approximately $0.2 million for the fiscal year ended 2017 and were recorded in selling, general and administration expenses.
The following unaudited supplemental pro forma disclosures are provided for the fiscal year ended December 30, 2017. All intercompany transactions have been eliminated.
Fiscal year ended 2017 2016
Revenues $28,477,870
 $25,029,681
Net loss (26,302,840) (23,736,518)
Basic and diluted earnings per share $(0.38) $(0.37)


5.    

6. Goodwill and Intangibles

A rollforward of the Company's goodwill by segment is as follows:

 Kopin Industrial Total
Balance, December 31, 2016$844,023
 $
 $844,023
March 2017 acquisition of NVIS, Inc.
 1,488,650
 1,488,650
Impairment of goodwill
 (600,086) (600,086)
Change due to exchange rate fluctuations47,660
 
 47,660
Balance, December 30, 2017891,683
 888,564
 1,780,247
Impairment of goodwill(528,906) (888,564) (1,417,470)
Change due to exchange rate fluctuations(31,433) 
 (31,433)
Balance, December 29, 2018$331,344
 $
 $331,344


Goodwill is evaluated for impairment annually or more often if indicators of a potential impairment are present. The Company performs impairment tests of goodwill at its reporting unit level. The goodwill valuations that are utilized to test these assets for impairment are depending on a number of significant estimates and assumptions, including macroeconomic conditions, overall growth rates, competitive activities, cost containment, Company business plans and the discount rate applied to cash flows. We believe these estimates and assumptions are reasonable and are comparable to those that would be used by other market participants. However, actual events and results could differ substantially from those used in our valuations. To the extent such factors result in a failure to achieve the level of projected cash flows initially used to estimate fair value for purposes of establishing the carrying amount of goodwill, we may need to record non-cash impairment charges in the future.
At December 29, 2018,In 2019, the Company performed ana qualitative impairment analysis of goodwill based on a comparison of the discounted cash flows to the recorded carrying value of the reporting units,for its e-MDT operating unit and determined that the discounted cash flows were not in excess of the carrying value of the NVIS reporting unit. At December 29, 2018, the Company decided to discontinue operations at its wholly-owned subsidiary, Kopin Software Ltd. and expects no future cash flows to support the carrying amount of goodwill.value. As a result of the analysis, the Company recorded an impairment of goodwill of $1.4$0.3 million atfor the year ended December 29, 2018.28, 2019. The input methods for goodwill are analyzed for impairment on a nonrecurring basis using fair value measurements with unobservable inputs, which is Level 3 in the fair value hierarchy.
The Company recognized $0.9 million, $1.6 million and $0.0 million in amortization expense for the fiscal years ended 2018, 2017 and 2016, respectively, related to intangible assets. At December 29, 2018, the Company has a carrying value of $2.5 million and accumulated amortization of $2.5 million related to intangibles. The intangibles have no remaining useful life.

46




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

6.    

7. Financial Instruments

Fair Value Measurements

Financial instruments are categorized as Level 1, Level 2 or Level 3 based upon the method by which their fair value is computed. An investment is categorized as Level 1 when its fair value is based on unadjusted quoted prices in active markets for identical assets that the Company has the ability to access at the measurement date. An investment is categorized as Level 2 if its fair market value is based on quoted market prices for similar assets in active markets, quoted prices for identical or similar assets in markets that are not active, based on observable inputs such as interest rates, yield curves, or derived from or corroborated by observable market data by correlation or other means. An investment is categorized as Level 3 if its fair value is based on assumptions developed by the Company about what a market participant would use in pricing the assets.

The following table details the fair value measurements of the Company’s financial assets:

Schedule of Fair Value Measurements of Financial Assets

     Fair Value Measurement at December 25, 2021 Using: 
  Total  Level 1  Level 2  Level 3 
Cash and cash equivalents $26,787,931  $26,787,931  $  $ 
U.S. government and agency backed securities  1,000,650      1,000,650    
Corporate debt  1,506,885      1,506,885    
Equity Investments  4,912,022   296,173      4,615,849 
  $34,207,488  $27,084,104  $2,507,535  $4,615,849 

61
   Fair Value Measurement at December 29, 2018 Using:
 Total Level 1         Level 2         Level 3        
Cash and cash equivalents$14,326,347
 $14,326,347
 $
 $
U.S. government and agency backed securities12,810,923
 
 12,810,923
 
Corporate debt10,107,093
 
 10,107,093
 
GCS Holdings288,026
 288,026
 
 
Equity Investments5,565,499
 
 
 5,565,499
 $43,097,888
 $14,614,373
 $22,918,016
 $5,565,499

   Fair Value Measurement at December 30, 2017 Using:
 Total Level 1         Level 2         Level 3        
Cash and cash equivalents$24,848,227
 $24,848,227
 $
 $
U.S. government and agency backed securities34,725,811
 6,927,323
 27,798,488
 
Corporate debt8,980,906
 
 8,980,906
 
Certificates of deposit200,740
 
 200,740
 
GCS Holdings478,546
 478,546
 
 
Warrant2,000,000
 
 
 2,000,000
 $71,234,230
 $32,254,096
 $36,980,134
 $2,000,000


Transfers between levels of the fair value hierarchy are reported at the beginning of the reporting period in which they occur.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

     Fair Value Measurement at December 26, 2020 Using: 
  Total  Level 1  Level 2  Level 3 
Cash and cash equivalents $17,112,869  $17,112,869  $  $ 
U.S. government and agency backed securities  1,023,120      1,023,120    
Corporate debt  2,612,561      2,612,561    
Equity Investments  4,523,525   293,891      4,229,634 
  $25,272,075  $17,406,760  $3,635,681  $4,229,634 

The carrying amounts of cash and cash equivalents, accounts receivable, accounts payable and accrued liabilities approximate fair value because of their short-term nature. If accrued liabilities were carried at fair value, these would be classified as Level 2 in the fair value hierarchy.

Changes in Level 3 investments are as follows:

 December 30, 2017 Net unrealized gains/(losses) Purchases, issuances and settlements Transfers in and or out of Level 3 December 29, 2018
Equity Investments$
 $(284,317) $5,849,816
 $
 $5,565,499
Warrant2,000,000
 (50,184) (1,949,816) 
 
 $2,000,000
 $(334,501) $3,900,000
 $
 $5,565,499


Schedule of Fair Value, Liabilities Measured On Recurring Basis

  December 26, 2020  Net unrealized gains  Impairment Charge  Transfers in and or out of Level 3  December 25, 2021 
Equity Investments $4,229,634  $386,215  $  $  $4,615,849 

Equity Investments

Equity investments rarely traded or not quoted will generally have less (or no) pricing observability and a higher degree of judgment utilized in measuring fair value. Initial measurement of equity investments occurs when an observable price for the equity investment is available. The Company adopted ASU No. 2016-01 and the related amendments on December 31, 2017 (the first day of the Company's fiscal year 2018). This standard amends various aspects of the recognition, measurement, presentation, and disclosure of financial instruments. The Company adopted the measurement alternative for equity investments without readily determinable fair values (often referred to as cost method investments) on a prospective basis. As a result, these investments will be revalued upon occurrence of an observable price change for similar investments and for impairments.


47




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

Warrant
The Company has limited, if any, control over their governance, financial reporting and operations. The Company relies on the financial reporting provided by these investments in order to evaluate them for possible impairment. As a result, we face certain operating, financial and other risks relating to these investments, including risks related to the financial strength of the investments.

The Company acquired an equity interest in a company in the first quarter of 2018. The Company made $1.9 million in payments to acquire this interest as of December 26, 2020. The Company also contributed certain intellectual property. For the years ended December 25, 2021 and December 26, 2020, the Company recorded approximately $0.1 million and, $0.3 million of unrealized gains, respectively, and for the years ended December 28, 2019, the Company recorded approximately $0.1 million of unrealized loss on this equity investment respectively due to a fluctuation in the foreign exchange rate. As of December 25, 2021, the Company owned an approximate 9% interest in this investment and the fair value of this equity investment was $3.9 million at December 25, 2021 and $3.8 million at December 26, 2020.

In 2017 the Company had a warrant to acquire up to 15% of the next round of equity offered by a customer as part of the licensing of technology to the customer. The Company exercisedused the pricing and terms of the qualified financing round by the customer in determining the value of its Series A warrant and recorded a gain of $2.0 million. The Company acquired an equity interest in April 2018.the customer by exercising the Series A warrant into Series A shares in the second quarter of 2018 and recorded a loss of less than $0.1 million. In addition, the Company acquired shares of the customer’s Series B shares valued at $2.5 million based on the fair value of the Series B at the closing in May 2019. During the second quarter of 2019, the Company recognized a $0.8 million gain based on an observable price change for the Series A shares by using the customer’s Series B capital structure, pricing of the shares being offered and the liquidation preference of Series B. In the fourth quarter of 2019, the Company reviewed the financial condition and other factors of the customer and, as a result, the Company recorded an impairment charge of $5.2 million to reduce its investment in the customer to zero as of December 25, 2021. As of December 25, 2021, the Company owned an approximate 2.8% interest in this investment.

62

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

On September 30, 2019 the Company entered into an Asset Purchase Agreement (the “Solos Purchase Agreement”) pursuant to which the Company sold and licensed certain assets of our SolosTM (“Solos”) product line and WhisperTM Audio (“Whisper”) technology. As consideration for the transaction the Company received a 20.0% equity stake in Solos Incorporation (“Solos Inc.”). The Company’s 20.0% equity stake will be maintained until Solos Inc. has raised a total of $7.5 million in equity financing. The Company will also receive a royalty in the single digits on the net sales amount of Solos products for a three-year period, after commencement of commercial production. The Company has performed the analysis and identified Solos Technology as a variable interest entity that should not be consolidated by Kopin, as Kopin is not the primary beneficiary of the entity. Kopin is not obligated to provide any additional funding support to Solos Inc., and its potential loss exposure is the value of the investment recorded on its books. Based on the price paid for equity by the other 80.0% owners of Solos Inc., volatility based on a peer group and assumptions about the risk free interest rate, the Company estimated the fair value of its’ equity holdings at $0.6 million and recorded $0.6 million gain on investment for this equity transaction as the basis of assets transferred was zero. In 2020 the Company performed impairment analysis and wrote the investment down to $0.4 million as of December 26, 2020.

Marketable Debt Securities

The corporate debt consists of floating rate notes with a maturity that is over multiple years but has interest rates that are reset every three months based on the then-current three-month London Interbank Offering Rate ("(“three-month Libor"Libor”). The Company validates the fair market values of the financial instruments above by using discounted cash flow models, obtaining independent pricing of the securities or through the use of a model that incorporates the three-month Libor, the credit default swap rate of the issuer and the bid and ask price spread of the same or similar investments which are traded on several markets. Investments in available-for-sale marketable debt securities are as follows at December 29, 201825, 2021 and December 30, 2017:26, 2020:

 

 Amortized Cost Unrealized Losses Fair Value
 2018 2017 2018 2017 2018 2017
U.S. government and agency backed securities$13,064,418
 $35,014,593
 $(253,495) $(288,782) $12,810,923
 $34,725,811
Corporate debt10,175,084
 8,988,608
 (67,991) (7,702) 10,107,093
 8,980,906
Certificates of deposits
 201,000
 
 (260) 
 200,740
Total$23,239,502
 $44,204,201
 $(321,486) $(296,744) $22,918,016
 $43,907,457


Schedule of Available-for-sale Marketable Debt Securities

  Amortized Cost  Unrealized Gains/(Losses)  Fair Value 
  2021  2020  2021  2020  2021  2020 
U.S. government and agency backed securities $1,000,128  $1,003,941  $522  $19,179  $1,000,650  $1,023,120 
Corporate debt  1,500,000   2,603,704   6,885   8,857   1,506,885   2,612,561 
Total    $2,500,128  $3,607,645  $7,407  $28,036  $2,507,535  $3,635,681 

The contractual maturity of the Company’s marketable debt securities is as follows at December 29, 2018:

 
Less than
One year
 
One to
Five years
 Total
U.S. government and agency backed securities$3,741,183
 $9,069,740
 $12,810,923
Corporate debt2,709,074
 7,398,019
 10,107,093
Total$6,450,257
 $16,467,759
 $22,918,016
25, 2021:


Schedule of Contractual Maturity

7.    

  Less than
One year
  One to
Five years
  Total 
U.S. government and agency backed securities $1,000,650  $  $1,000,650 
Corporate debt     1,506,885   1,506,885 
Total $1,000,650  $1,506,885  $2,507,535 

8. Stockholders’ Equity and Stock-Based Compensation

Sale of Unregistered Common Stock

On April 20, 2017,Treasury Stock:

During the year ended December 25, 2021, the Company sold 7,589,0003,096,697 shares of unregisteredits common stock for approximately $21.0 million, net of offering expenses, through the sale of shares under its At The Market Offering Agreement, dated December 14, 2018. Commissions paid were approximately $650,000. The Company intends to Goertek, Inc.use the net proceeds from sales made under the ATM offering for $24,664,250 ($3.25working capital and other general corporate purposes.

Registered Sale of Equity Securities

In the first fiscal quarter of 2021, we sold 2,404,362 shares of common stock for gross proceeds of $16 million (average of $6.66 per share), before deducting broker expenses paid by us of $0.5 million and in the second fiscal quarter of 2021, we sold 92,335 shares of common stock for gross proceeds of $0.8 million (average of $6.74 per share), before deducting broker expenses paid by us of $0.1 million pursuant to the Company’s At-The-Market Equity Offering Sales Agreement (“ATM Agreement”) dated as of February 8, 2019. The ATM Agreement dated as of February 8, 2019 has since terminated pursuant to its terms as a result of the sale of all the shares subject to such agreement. On March 5, 2021, the Company entered into a new At-The-Market Offering Sales Agreement (the “Current ATM Agreement”) under which we may sell up to $50 million of our common stock. In third fiscal quarter of 2021, we sold 600,000 shares of common stock for gross proceeds of $4.8 million (average of $8.06 per share), before deducting broker expenses paid by us of $0.1 million under the Current ATM Agreement. The net proceeds from the sale of common shares were used for general corporate purposes, including working capital. We have available $44.3 million for sale of common stock under the Current ATM Agreement.

On March 15, 2019, the Company sold 7.3 million shares of registered common stock for gross proceeds of $8.0 million ($1.10 per share), before deducting underwriting discounts and offering expenses paid by the Company of $0.7 million. This represented approximately 10.1%8.9% of Kopin’s total outstanding shares of common stock as of the date of purchase. In addition, KopinThe net proceeds from the offering were used for general corporate purposes, including working capital. On April 10, 2019, the Company sold 0.7 million shares of registered common stock for gross proceeds of $0.8 million ($1.10 per share), before deducting underwriting discounts and Goertek have entered into agreementsoffering expenses paid by the Company of less than $0.1 million, pursuant to jointly develop and commercialize a range of technologies and wearable products. Goertek is a leading innovative global technology company headquartered in Weifang, China that designs and manufactures a range of consumer electronics products for brand customers including wearables, virtual and augmented reality headsets, and audio products. The transaction was accounted for under ASC 505-30 "Treasury Stock", and the loss on the salepartial exercise of the treasuryunderwriters’ overallotment option in connection with its March 15, 2019 public offering. This represented approximately 0.8% of Kopin’s total outstanding shares of common stock of approximately $0.8 million was charged to retained earnings. At completionas of the transaction, the U.S. government requested certain information regarding the transaction for the Committee on Foreign Investment. See Note 16. Related Party Transactions for additional discussion around agreements with Goertek.date of purchase.

63

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

Restricted Stock Awards

In 2010,2020, the Company adopted a 20102020 Equity Incentive Plan ("2010(“2020 Equity Plan"Plan”) which authorized the issuance of shares of common stock to employees, non-employees, and the Board. The 20102020 Equity Plan was a successor to the Company’s 20012010 Equity Incentive Plan ("2001(“2010 Equity Plan"Plan”) and has been subsequently amended to increase the number of authorized shares to 14,100,000 as of December 29, 2018.. The number of shares authorized under the 2020 Equity Plan was 4,000,000 shares of Company Stock. In addition, shares of the Company Stock underlying any outstanding award granted under the 2010 Equity Plan that expires, or is the numberterminated, surrendered or forfeited for any reason without issuance of such shares approved by the shareholders plus the number of shares of common stock which wereshall be available for grantthe award of new Grants under the 2001 Equity Plan, the number of shares of common stock which were the subject of awards outstanding under the 2001 Equity Plan and are forfeited, terminated, canceled or expire after the adoption of the 2010 Equity Plan and the number of shares of common stock delivered to the Company either in exercise of an 2001 Equity Plan award or in satisfaction of a tax withholding obligation. The term and vesting period for restricted stock awards granted under the 2010 Equity Plan are determined by the Board’s compensation committee.this Plan. As of December 29, 2018,25, 2021, the Company has approximately 1.72.4 million shares of common stock authorized and available for issuance under the Company’s 20102020 Equity Plan.


48




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

The fair value of non-vested restricted common stock awards is generally the market value of the Company’s common stock on the date of grant. The non-vested restricted common stock awards require the employee to fulfill certain obligations, including remaining employed by the Company for periods ranging from one two or fourto five years (the vesting period) and in certain cases also require meeting either performance criteria or the Company’s stock achieving a certain price. For non-vested restricted common stock awards that solely require the recipient to remain employed with the Company, the stock compensation expense is amortized over the anticipated service period. For non-vested restricted common stock awards that require the achievement of performance criteria, the Company reviews the probability of achieving the performance goals on a periodic basis. If the Company determines that it is probable that the performance criteria will be achieved, the amount of compensation cost derived for the performance goal is amortized over the anticipated service period. If the performance criteria are not met, no compensation cost is recognized and any previously recognized compensation cost is reversed.

 Shares 
Weighted
Average
Grant
Fair Value
Outstanding at December 26, 20152,192,016
 $3.82
Granted1,663,000
 2.40
Forfeited(110,500) 3.21
Vested(736,842) 3.17
Outstanding at December 31, 20163,007,674
 3.21
Granted1,152,000
 3.40
Forfeited(465,150) 3.82
Vested(1,065,250) 2.90
Balance at December 30, 20172,629,274
 3.31
Granted1,549,000
 2.25
Forfeited(872,025) 3.78
Vested(1,093,000) 3.05
Balance at December 29, 20182,213,249
 $2.51


Schedule of Non-vested Restricted Stock Activity

  Shares  Weighted Average Grant Fair Value 
Balance at December 28, 2019  1,863,124  $1.60 
Granted  2,381,000   1.42 
Forfeited  (153,595)  1.71 
Vested  (1,038,655)  0.96 
Balance at December 26, 2020  3,051,874   1.67 
Granted  2,247,343   3.46 
Forfeited  (1,654,666)  2.03 
Vested  (1,566,959)  2.23 
Balance at December 25, 2021  2,077,592  $2.90 

On December 31, 20172020 (fiscal year beginning 2018)2021), the Company amended the employment agreement with our CEO Dr. John Fan to expire on December 31, 202024, 2022 and as part of the amendment issued restricted stock grants. 640,000 five tranches of 188,000 shares of restricted stock which willgrants. The grants would vest upon the first achievement of the Company’s stock price reaching certain levels for 20 consecutive trading day period following the grant date during whichdate. The Company used a Monte Carlo model to determine the Company's common stock trades at a price equal to or greater than $5.25, 150,000 shares of restricted stock will vest at the endestimated fair value of the first 20 consecutive trading day period followingawards. Total compensation expense resulting from the grant date during whichawards is approximately $2.1 million. The Company’s stock price met the Company’s common stock trades at a price per share equal to or greater than $6.00, and 150,000 shares of restricted common stock will vest at the end ofrequired levels in the first 20 consecutive trading day period followingquarter of fiscal year 2021 and the grant date during whichtotal stock compensation expense was recognized in the Company’s common stock trades at a price per share equal to or greater than $7.00.first quarter of fiscal year 2021. All of the grants are subject to certain acceleration events and terminate on December 31, 2020.24, 2022. The following table describes inputs used to calculate fair value of the restricted stock grants:

Schedule of Share-based Payment Award, Employee Stock Purchase Plan, Valuation Assumptions

Expected volatility94.2%
Interest rate0.2%
Expected life (years)0.7
Dividend yield%

 For the period ended December 29, 2018
Performance price target$5.25
 $6.00
 $7.00
Expected volatility48.3% 48.3% 48.3%
Interest rate1.97% 1.97% 1.97%
Expected life (years)2
 2
 2
Dividend yield% % %
64

49




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)


Stock-Based Compensation

The following table summarizes stock-based compensation expense within each of the categories below as it relates to non-vested restricted common stock awards for the fiscal years 2018, 20172021, 2020 and 20162019 (no tax benefits were recognized):

 2018 2017 2016
Cost of product revenues$418,605
 $490,481
 $561,791
Research and development725,112
 799,485
 527,081
Selling, general and administrative3,647,337
 1,006,165
 1,336,454
Total$4,791,054
 $2,296,131
 $2,425,326


Schedule of Stock-based Compensation Expense

  2021  2020  2019 
Cost of product revenues $211,362  $113,517  $102,629 
Research and development  576,193   204,599   295,872 
Selling, general and administrative  3,629,867   503,006   1,658,899 
Total $4,417,422  $821,122  $2,057,400 

Unrecognized compensation expense for non-vested restricted common stock as of December 29, 201825, 2021 totaled $3.4$3.7 million and is expected to be recognized over a weighted average period of approximately twofour years.

8.    

9. Concentrations of Risk

Ongoing credit evaluations of customers’ financial condition are performed and collateral, such as letters of credit, are generally not required. Customer’s accounts receivable balance as a percentage of total accounts receivable was as follows:

 
Percent of Gross
Accounts Receivable
CustomerDecember 29,
2018
 December 30,
2017
Collins Aerospace11% *
DRS Technologies11% *
Scott Safety* 14%
RealWear, Inc.31% 10%
U.S. Army* 43%
Note: The symbol “*” indicates that accounts receivables from that customer were less than 10%

Schedules of the Company’s total accounts receivable.

Concentration of Risk, by Risk Factor

  Percent of Gross Accounts Receivable 
Customer December 25, 2021  December 26, 2020 
Collins Aerospace  29%  45%
DRS Network & Imaging Systems, LLC  35%  15%

Sales to significant non-affiliated customers for fiscal years 2018, 20172021, 2020 and 2016,2019, as a percentage of total revenues, is as follows:

 
Sales as a Percent
of Total Revenue
 Fiscal Year
Customer2018 2017 2016
Military Customers in Total36% 48% 24%
General Dynamics11% * *
DRS Technologies* 10% *
Collins Aerospace20% 10% 12%
Shenzhen Oriscape* * 20%
U.S. Army* 12% *
Funded Research and Development Contracts20% 11% 7%


  Sales as a Percent of Total Revenue 
  Fiscal Year 
Customer 2021  2020  2019 
Defense Customers in Total  40%  50%  30%
DRS Network & Imaging Systems, LLC  31%  35%  17%
Collins Aerospace  30%  27%  * 
Realwear, Inc.  *   *   20%
Funded Research and Development Contracts  32%  25%  17%

Note: The symbol “*” indicates that sales to that customer were less than 10% of the Company’s total revenues. The caption "Military“Defense Customers in Total"Total” excludes research and development contracts.

65


50




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)


9.    

10. Income Taxes

The (benefit) provision for income taxes from continuing operations consists of the following for the fiscal years indicated:

Schedule of Components of Income Tax Expense (Benefit)

             
  Fiscal Year 
  2021  2020  2019 
Current            
State $1,000  $  $4,000 
Foreign  128,000   129,000   104,000 
Total current provision  129,000   129,000   108,000 
Deferred            
Federal  (3,367,000)  (1,075,000)  (5,165,000)
State  (928,000)  (321,000)  (2,341,000)
Foreign  318,000   (19,000)  (56,000)
Change in valuation allowance  3,977,000   1,415,000   7,562,000 
Total deferred provision         
Total provision for income taxes $129,000  $129,000  $108,000 

 

 Fiscal Year
 2018 2017 2016
Current     
State$5,000
 $5,000
 $33,000
Foreign25,000
 (568,000) 1,656,000
Total current provision30,000
 (563,000) 1,689,000
Deferred     
Federal(7,307,000) 15,461,000
 (8,718,000)
State(360,000) (493,000) (1,264,000)
Foreign300,000
 (187,000) 2,308,000
Change in valuation allowance7,367,000
 (17,181,000) 9,115,000
Total (benefit) deferred provision
 (2,400,000) 1,441,000
Total provision (benefit) for income taxes$30,000
 $(2,963,000) $3,130,000

The following table sets forth the changes in Kopin'sthe Company’s balance of unrecognized tax benefits for the year ended:


Total
Unrecognized tax benefits at December 26, 2016$374,000
Gross increases—prior year tax positions20,000
Unrecognized tax benefits at December 30, 2017394,000
Gross increases—current year tax positions
Unrecognized tax benefits at December 29, 2018$394,000


Schedule of Unrecognized Tax Benefit

  Total 
Unrecognized tax benefits at December 28, 2019 $394,000 
Gross increases—prior year tax positions   
     
Unrecognized tax benefits at December 26, 2020  394,000 
     
Gross increases—current year tax positions   
Unrecognized tax benefits at December 25, 2021 $394,000 

U.S. GAAP requires applying a 'more‘more likely than not'not’ threshold to the recognition and derecognition of uncertain tax positions either taken or expected to be taken by Kopin'sthe Company’s income tax returns. The total amount of our gross tax liability for tax positions that may not be sustained under a 'more‘more likely than not'not’ threshold amounts to $0.4$0.4 million as of December 29, 201825, 2021 and December 30, 2017. Kopin's26, 2020. The Company’s policy regarding the classification of interest and penalties is to include these amounts as a component of income tax expense. The total amount of accrued interest and penalties related to the Company'sCompany’s unrecognized tax benefits was $0.5$1.0 million and $0.9 million as of December 29, 201825, 2021 and December 30, 2017.

26, 2020 respectively.

Net operating losses were not utilized in 2018, 20172021, 2020 and 20162019 to offset federal and state taxes.

66

51




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)


The actual income tax (benefit) provision reported from operations are different than those which would have been computed by applying the federal statutory tax rate to loss before income tax (benefit) provision. A reconciliation of income tax (benefit) provision from continuing operations as computed at the U.S. federal statutory income tax rate to the provision for income tax benefit is as follows:

 Fiscal Year
 2018 2017 2016
Tax provision at federal statutory rates$(7,515,000) $(9,884,000) $(6,965,000)
State tax liability5,000
 5,000
 22,000
Foreign deferred tax rate differential(39,000) 15,000
 (678,000)
Foreign withholding301,000
 (771,000) 1,441,000
Outside basis in Kowon, net unremitted earnings(468,000) (2,888,000) 958,000
Permanent items186,000
 774,000
 259,000
Increase in net state operating loss carryforwards(406,000) (300,000) (502,000)
Utilization of net operating losses for U.K. research and development refund
 
 (142,000)
Provision to tax return adjustments and tax rate change (1)
(76,000) 24,833,000
 (66,000)
Tax credits239,000
 24,000
 (762,000)
Non-deductible 162M compensation limitations13,000
 199,000
 
Non-deductible equity compensation290,000
 1,901,000
 (360,000)
Uncertain tax position for transfer pricing91,000
 203,000
 671,000
Other, net45,000
 107,000
 139,000
Change in valuation allowance7,364,000
 (17,181,000) 9,115,000
 $30,000
 $(2,963,000) $3,130,000


(1)Due to the Tax Act which was enacted in December 2017, our U.S. deferred tax assets and liabilities as of December 30, 2017 were re-measured to 21%. The provisional amount recorded related to the remeasurement of our deferred tax balance was approximately $25.1 million of tax expense.

Schedule of Effective Income Tax Rate Reconciliation

             
  Fiscal Year 
  2021  2020  2019 
Tax provision at federal statutory rates $(2,787,000) $(925,000) $(6,196,000)
State tax liability        4,000 
Foreign deferred tax rate differential  (55,000)  (38,000)  (64,000)
Permanent items  (79,000)  238,000   1,964,000 
Increase in net state operating loss carryforwards  (911,000)  (233,000)  (1,985,000)
Utilization of net operating losses for U.K. research and development refund  (134,000)  (151,000)  (148,000)
Provision to tax return adjustments and tax rate change  (69,000)  (180,000)  803,000 
Tax credits  (261,000)  9,000   (1,931,000)
Equity compensation  326,000   (121,000)  16,000 
Uncertain tax position for transfer pricing  128,000   129,000   105,000 
Other, net  (6,000)  (14,000)  (22,000)
Change in valuation allowance  3,977,000   1,415,000   7,562,000 
Total provision $129,000  $129,000  $108,000 

Pretax foreign income from continuing operations was approximately $0.7$2.7 million for the fiscal year ended 2021, $1.0 million for fiscal year ended 2018, pretax foreign loss from continuing operations was approximately $0.42020, and $1.3 million for fiscal year ended 2017 and pretax foreign income from continuing operations was approximately $5.4 million for fiscal year ended 2016.2019. Deferred income taxes are provided to recognize the effect of temporary differences between tax and financial reporting. Deferred income tax assets and liabilities consist of the following:

Schedule of Deferred Tax Assets and Liabilities

         
  Fiscal Year 
  2021  2020 
Deferred tax liability:        
Foreign withholding liability $(513,000) $(554,000)
Deferred tax assets:        
Federal net operating loss carryforwards  49,609,000   46,311,000 
State net operating loss carryforwards  6,393,000   5,454,000 
Foreign net operating loss carryforwards  994,000   1,319,000 
Equity awards  222,000   549,000 
Tax credits  9,413,000   9,153,000 
Property, plant and equipment  620,000   577,000 
Unrealized losses on investments  2,834,000   2,860,000 
Other  872,000   757,000 
Net deferred tax assets  70,444,000   66,426,000 
Valuation allowance  (70,957,000)  (66,980,000)
Deferred tax assets, net $(513,000) $(554,000)

 

67
 Fiscal Year
 2018 2017
Deferred tax liability:   
Foreign withholding liability$(538,000) $(812,000)
Foreign unremitted earnings
 (468,000)
Intangible assets
 (259,000)
Deferred tax assets:   
Federal net operating loss carryforwards41,755,000
 34,555,000
State net operating loss carryforwards3,114,000
 2,708,000
Foreign net operating loss carryforwards1,259,000
 1,500,000
Equity awards444,000
 55,000
Tax credits7,231,000
 7,470,000
Property, plant and equipment640,000
 544,000
Unrealized losses on investments1,848,000
 1,792,000
Other1,707,000
 3,037,000
Net deferred tax assets57,460,000
 50,122,000
Valuation allowance(58,006,000) (50,642,000)
 $(546,000) $(520,000)



52




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)


The valuation allowance was approximately $58.0 $71.0 million and $50.6 $67.0 million at December 29, 201825, 2021 and December 30, 2017,26, 2020, respectively, primarily driven by U.S. net operating loss carryforwards ("NOLs"(“NOLs”) and tax credits that the Company does not believe will ultimately be realized.

On December 22, 2017, the President signed the Tax Cuts and Jobs Act of 2017 ("2017 Act") which enacted a wide range of changes to the U.S. corporate income tax system. The 2017 Act reduced the U.S. corporate statutory federal tax rate to 21% effective in 2018, eliminated the domestic manufacturing deduction benefit and introduced other tax base broadening measures, changed rules for expensing and capitalizing business expenditures, established a territorial tax system for foreign earnings as well as a minimum tax on certain foreign earnings, provided for a one-time transition tax on previously undistributed foreign earnings, and introduced new rules for the treatment of certain foreign income. Also on December 22, 2017, the Securities and Exchange Commission (SEC) issued Staff Accounting Bulletin No. 118 (SAB 118), which provided companies with additional guidance on how to account for the 2017 Act in their financial statements, allowing companies to use a measurement period.

As of December 30, 2017, we made a reasonable estimate of the effects on our existing deferred tax balances and the one-time transition tax on previously undistributed foreign earnings and the Company did not recognize any provisional amounts in the (benefit) provision for income taxes in accordance with SAB 118. As of December 29, 2018, we had finalized our provisional estimates for the remeasurement of our existing U.S. deferred tax balances and the one-time transition tax and did not recognize amounts in the (benefit) provision for income taxes.

Deferred tax assets and liabilities—The Company has remeasured certain deferred tax assets and liabilities, excluding those items that will be included on the Company's 2017 tax return, based on the rates the Company expects to realize the deferred tax assets and liabilities at in the future, which is generally 21%. The amount recorded related to the remeasurement of the Company's deferred tax balance was approximately $25.1 million of tax expense. At December 29, 2018, we have finalized our provisional estimate for the remeasurement of our existed deferred tax balances with no additional adjustment.
The Company recorded a reduction in the valuation allowance during 2017 of approximately $1.0 million which was previously recorded against the Company’s AMT credit. The Company expects to receive a refund of $1.0 million from our AMT credit in accordance with the Tax Act and have recorded the receivable in "Other assets" on the Company's consolidated balance sheets at December 29, 2018.
In addition to the changes described above, the 2017 Act imposes a U.S. tax on global intangible low taxed income ("GILTI") that is earned by certain foreign affiliates owned by a U.S. shareholder. The computation of GILTI is generally intended to impose tax on the earnings of a foreign corporation that are deemed to exceed a certain threshold return relative to the underlying business investment. The Company has made a policy election to treat future taxes related to GILTI as a current period expense in the reporting period in which the tax is incurred.
Foreign tax effects—The one-time transition tax is based on our total post-1986 earnings and profits (“E&P”) for which the Company has previously deferred U.S. income taxes. The Company is estimating that the Company will not have a provisional requirement amount for our one-time transition tax liability, using an estimated applicable tax rate of 15.5%, resulting in no increase in income tax expense. The Company has not yet completed our calculation of the total post-1986 foreign E&P for these foreign subsidiaries. Further, the transition tax is based in part on the amount of those earnings held in cash and other specified assets. This amount may change when the Company finalizes the calculation of post-1986 foreign E&P previously deferred from U.S. federal taxation and finalize the amounts held in cash or other specified assets. The Company also expects additional clarifying and interpretative technical guidance to be issued related to the calculation of our one-time transition tax. No additional income taxes have been provided for any remaining undistributed foreign earnings not subject to the transition tax and any additional outside basis difference inherent in these entities as these amounts continue to be indefinitely reinvested in foreign operations.
As of December 29, 2018,25, 2021, the Company has available for tax purposes NOLs of $160.3 $198.8 millionexpiring 20222021 through 20372038and $60.1 .million that have an unlimited carryover period. The Company has recognized a full valuation allowance on its net deferred tax assets as the Company has concluded that such assets are not more likely than not to be realized.

The decrease in valuation allowance during fiscal year 2018 was a result of decreases in the federal tax rate as part of the Tax Act and a reduction in the valuation allowance as a result of deferred tax liabilities assumed as part of the acquisition of NVIS.

The2017 Tax Act imposes a mandatory transition tax on accumulated foreign earnings and eliminates U.S. taxes on foreign subsidiary distribution. As a result, earnings in foreign jurisdictions are available for distribution to the U.S. without incremental U.S. income taxes.

Under the provisions of Section 382, certain substantial changes in Kopin’s ownership may limit in the future the amount of net operating loss carryforwards that could be used annually to offset future taxable income and income tax liability.


53




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

The Company’s income tax returns have not been examined by the Internal Revenue Service and are subject to examination for all years since 2001.2001. State income tax returns are generally subject to examination for a period of three to five years after filing of the respective return. The state impact of any federal changes remains subject to examination by various states for a period of up to one year after formal notification to the states.

International jurisdictions have statutes of limitations generally ranging from three to twenty years after filing of the respective return. Years still open to examination by tax authorities in major jurisdictions include Korea (2009 onward)(2010 onward), Japan (2009 onward)(2010 onward), Hong Kong (2011 onward)(2012 onward) and United Kingdom (2014 onward)(2015 onward). The Company is not currently under examination in these jurisdictions.

10.    

11. Accrued Warranty

The Company warrants its products against defect for 12 months, however, for certain products a customer may purchase an extended warranty. A provision for estimated future costs and estimated returns for credit relating to such warranty is recorded in the period when product is shipped and revenue is recognized, and is updated as additional information becomes available. The Company’s estimate of future costs to satisfy warranty obligations is based primarily on historical warranty expense experienced and a provision for potential future product failures. Changes in the accrued warranty for fiscal years ended 2018, 20172021, 2020 and 20162019 are as follows:

 Fiscal Year Ended
 December 29,
2018
 December 30,
2017
 December 31,
2016
Beginning balance$649,000
 $518,000
 $518,000
Additions159,000
 328,000
 440,000
Claim and reversals(237,000) (197,000) (440,000)
Ending Balance$571,000
 $649,000
 $518,000


11.    

Schedule of Accrued Warranty

             
  Fiscal Year Ended 
  December 25, 2021  December 26, 2020  December 28, 2019 
Beginning balance $508,000  $509,000  $571,000 
Additions  791,000   435,000   471,000 
Claim and reversals  (782,000)  (436,000)  (533,000)
Ending Balance $517,000  $508,000  $509,000 

12. Employee Benefit Plan

The Company has an employee benefit plan pursuant to Section 401(k) of the Internal Revenue Code of 1986, as amended. In 2018,2021 the plan allowed employees to defer an amount of their annual compensation up to a current maximum of $19,500$18,500 if they are under the age of 50 and $26,000$24,500 if they are over the age of 50.50. The Company matches 50% of all deferred compensation on the first 6% of each employee’s deferred compensation. The amount charged to operations in connection with this plan was approximately $0.3$0.4 million in fiscal year 2021, and $0.3 million in fiscal years 2020 and 2019.2018, 2017

 and 2016.

68

12.    Commitments and Contingencies
Leases
The Company leases various facilities. The following is a schedule of minimum rental commitments under non-cancelable operating leases at December 29, 2018:
Fiscal year ending,Amount
2019$1,210,000
20201,112,000
2021921,000
2022616,000
2023201,000
Thereafter
Total minimum lease payments$4,060,000

Amounts incurred under operating leases are recorded as rent expense on a straight-line basis. Total rent expense in the fiscal years ended 2018, 2017 and 2016 were approximately $1.4 million, $1.5 million

 and

$1.3 million, respectively.

The Company has entered into an agreement to make a capital contribution of approximately $5.1 million (the Company's capital contribution under the agreement is $35.0 million Chinese Yuan Renminbi). The Company’s ability to make its capital contribution is subject to Chinese laws which include restrictions of direct foreign investment. Accordingly, the Company will need to make the capital contribution through its Chinese subsidiary’s operations.

54




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

13. Commitments

As of December 25, 2021, the Company has no material additional commitments beyond those described in this Form 10-K.

14. Litigation

The Company may engage in legal proceedings arising in the ordinary course of business. Claims, suits, investigations and proceedings are inherently uncertain and it is not possible to predict the ultimate outcome of such matters and our business, financial condition, results of operations or cash flows could be affected in any particular period.

BlueRadios, Inc. v. Kopin Corporation, Civil Action No. 16-02052-JLK (D. Col.):

On August 12, 2016, BlueRadios, Inc. ("BlueRadios"(“BlueRadios”) filed a complaint in the U.S. District Court for the District of Colorado, alleging that the Company breached a contract between it and BlueRadios concerning aan alleged joint venture between the Company and BlueRadios to design, develop and commercialize microdisplaymicro-display products with embedded wireless technology referred to as “Golden-i”. Additionally BlueRadios alleged that the Company, breached the covenant of good faith and fair dealing associated with that contract, breached its fiduciary duty to BlueRadios, and misappropriated trade secrets owned by BlueRadios in violation of Colorado law (C.R.S. § 7-74-104(4)) and the Defend Trade Secrets Act (18 U.S.C. § 1836(b)(1)). BlueRadios further alleges that the Company was unjustly enriched by its alleged misconduct, BlueRadios is entitled to an accounting to determine the amount of profits obtained by the Company as a result of its alleged misconduct, and the inventorship on at least ten patents or patent applications owned by the Company need to be corrected to list BlueRadios’ employees as inventors and thereby list BlueRadios as co-assignees of the patents. BlueRadios seeks monetary, declaratory, and injunctive relief. relief, including for alleged non-payment of engineering retainer fees.

On October 11, 2016, the Company filed its Answer and Affirmative Defenses. The parties arecompleted expert depositions on November 15, 2019. On December 2, 2019, the Company filed a Motion for Partial Summary Judgment requesting the Court dismiss counts 2-7 in their entirety and counts 1 and 8 in part. BlueRadios also filed a Motion for Partial Summary Judgment alleging it is the midstco-owner of discovery, withU.S. Patent No. 8,909,296. Responses to the close of all discovery currently setMotions for June 14, 2019, or 120 days after a claim construction order should one be necessary.Partial Summary Judgment were filed on January 15, 2020, and replies were filed on February 19, 2020. On September 25, 2020, the Court denied BlueRadios’ Motion for Partial Summary Judgment. A trial date has not yet been set by the Court. The Company has not concluded a loss from this matter is probable; therefore, we have not recorded an accrual for litigation or claims related to this matter for the period ended December 29, 2018.25, 2021. The Company will continue to evaluate information as it becomes known and will record an estimate for losses at the time or times when it is both probable that a loss has been incurred and the amount of the loss is reasonably estimable.

69


55




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)


14.    

15. Segments and Disaggregation of Revenue (As Revised)

The Company’s chief operating decision maker is its Chief Executive Officer. The Company has determined it has two reportable segments, Industrial, which includes the operations that develop and manufacture its reflective display products and virtual reality systems for test and simulation products, and Kopin, which includes the operations that develop and manufacture its other products.
As noted in Note 1. Summary of Significant Accounting Policies, effective December 31, 2017, the Company adopted Topic 606 using the modified retrospective method. The comparative information has not been revised and continues to be reported under the accounting standards in effect for those periods.

Segment financial results were as follows:

Total Revenue (in thousands)
2018 2017 2016
Kopin$16,981
 $15,942
 $18,733
Industrial9,116
 13,585
 3,909
Eliminations(1,631) (1,685) 
Total$24,465
 $27,841
 $22,643
      
Total Intersegment Revenue (in thousands)
2018 2017 2016
Kopin$
 $
 $
Industrial1,631
 1,685
 
Total$1,631
 $1,685
 $
      
 2018 2017 2016
Net Loss Attributable to the Controlling Interest (in thousands)
(As Revised)1
   
(As Revised)1
Kopin$(33,768) $(26,153) $(22,757)
Industrial(766) 1,277
 (812)
Eliminations
 (364) 
Total$(34,534) $(25,240) $(23,569)
      
Intersegment Loss Attributable to the Controlling Interest (in thousands)
2018 2017 2016
Kopin$
 $
 $
Industrial
 364
 
Total$
 $364
 $
      
Total Assets (in thousands)
  2018 2017
Kopin  $50,995
 $82,707
Industrial  8,554
 8,615
Total  $59,549
 $91,322

1.For discussion of the correcting adjustments, see Note 18 - Correction of Previously Issued Financial Statements

56




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

Total long-livelong-lived assets by country at December 29, 201825, 2021 and December 30, 201726, 2020 were:

Total Long-lived Assets (in thousands)
2018 2017
U.S.$2,101
 $2,456
United Kingdom197
 192
China251
 338
Japan50
 206
Korea
 1,885
Total$2,599
 $5,077


Schedule of Long-lived Assets by Geographic Areas

Total Long-lived Assets (in thousands) 2021  2020 
U.S. $5,381  $3,028 
United Kingdom  264   329 
China     11 
Japan  72   39 
Total $5,717  $3,407 

We disaggregate our revenue from contracts with customers by geographic location and by display application, as we believe it best depicts how the nature, amount, timing and uncertainty of our revenue and cash flows are affected by economic factors.


57




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

Total revenue by geographical area for the fiscal years ended December 29, 2018,25, 2021, December 30, 201726, 2020 and December 31, 2016 was as follows:28, 2019:

 2018
 Kopin Industrial Total
(In thousands, except percentages)Revenue % of Total Revenue % of Total Revenue % of Total
U.S.$10,799
 44% $3,637
 15% $14,436
 59%
Other Americas49
 
 74
 
 123
 1
Total Americas10,848
 44
 3,712
 15
 14,559
 60
Asia-Pacific4,932
 20
 1,984
 8
 6,916
 28
Europe1,194
 5
 1,754
 7
 2,948
 12
Other7
 
 35
 
 42
 
Total Revenues$16,981
 69% $7,484
 30% $24,465
 100%
            
 2017
 Kopin Industrial Total
(In thousands, except percentages)Revenue % of Total Revenue % of Total Revenue % of Total
U.S.$10,056
 36% $6,484
 23% $16,540
 59%
Other Americas24
 
 62
 
 86
 
Total Americas10,080
 36
 6,545
 24
 16,626
 60
Asia-Pacific4,006
 14
 1,401
 5
 5,406
 19
Europe1,856
 7
 3,954
 14
 5,810
 21
Total Revenues$15,942
 57% $11,900
 43% $27,841
 100%
            
 2016
 Kopin Industrial Total
(In thousands, except percentages)Revenue % of Total Revenue % of Total Revenue % of Total
U.S.$8,847
 39% $390
 2% $9,237
 41%
Other Americas41
 
 
 
 41
 
Total Americas8,887
 39
 390
 2
 9,278
 41
Asia-Pacific7,588
 33
 2,260
 10
 9,849
 43
Europe2,258
 10
 1,258
 6
 3,516
 16
Total Revenues$18,733
 82% $3,909
 18% $22,643
 100%



58




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

Schedule of Segment Information by Revenue Type

  2021  2020  2019 
(In thousands, except percentages) Revenue  % of Total  Revenue  % of Total  Revenue  % of Total 
U.S. $32,461   71% $33,031   82% $14,946   51%
Other Americas        101      134   %
Total Americas  32,461   71%  33,132   82%  15,080   51%
Asia-Pacific  11,852   26%  5,798   15%  11,768   40%
Europe  1,353   3%  1,198   3%  2,628   9%
Other     %     %  42   %
Total Revenues $45,666   100% $40,128   100% $29,519   100%

Total revenue by display application for the fiscal years ended December 29, 2018,25, 2021, December 30, 201726, 2020 and December 31, 201628, 2019 was as follows:

Schedule of Segment Reporting Information, by Segment

(In thousands) 2021  2020  2019 
Defense $18,180  $20,231  $8,729 
Industrial  9,710   6,882   9,717 
Consumer  1,871   852   1,777 
R&D  14,669   10,123   4,983 
Other  121   553   61 
License and royalties  1,115   1,487   4,252 
Total Revenues $45,666  $40,128  $29,519 

 2018
(In thousands)Kopin Industrial Total
Military$4,755
 $3,969
 $8,724
Industrial2,969
 3,096
 6,066
Consumer4,146
 
 4,146
R&D5,035
 219
 5,254
Other75
 200
 275
Total Revenues$16,981
 $7,484
 $24,465
      
 2017
(In thousands)Kopin Industrial Total
Military$4,400
 $9,038
 $13,438
Industrial2,695
 2,783
 5,478
Consumer4,406
 
 4,406
R&D2,938
 9
 2,947
Other1,503
 69
 1,573
Total Revenues$15,942
 $11,900
 $27,841
      
 2016
(In thousands)Kopin Industrial Total
Military$4,963
 $375
 $5,338
Industrial3,128
 3,168
 6,296
Consumer7,418
 
 7,418
R&D1,527
 
 1,527
Other1,697
 367
 2,064
Total Revenues$18,733
 $3,909
 $22,643

70


59




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)


15.    Selected Quarterly Financial Information (Unaudited) (As Revised)
The following tables present Kopin’s quarterly operating results for the fiscal years ended December 29, 2018 and December 30, 2017. The information for each of these quarters is unaudited and has been prepared on the same basis as the audited consolidated financial statements. In the opinion of management, all necessary adjustments, consisting only of normal recurring adjustments, have been included to present fairly the unaudited consolidated quarterly results when read in conjunction with Kopin’s audited consolidated financial statements and related notes. These operating results are not necessarily indicative of the results of any future period.
Quarterly Periods During Fiscal Year Ended December 29, 2018:

 

(in thousands, except per share data)
Three months
ended
March 31, 2018
(3)
 Three months
ended
June 30, 2018
 Three months
ended
September 29, 2018
 
Three months
ended
December 29, 2018
(4)
Total revenue$5,654
 $5,944
 $5,126
 $7,741
Gross profit (2)
983
 974
 (16) 1,439
Loss from operations(9,792) (8,992) (10,299) (10,884)
Net loss attributable to the controlling interest(5,536) (9,241) (9,791) (9,966)
Net loss per share (1):
       
Basic and diluted$(0.08) $(0.13) $(0.13) $(0.14)
Weighted average number of common shares outstanding:       
Basic and diluted73,078
 73,095
 73,135
 73,317
(1)Net loss per share is computed independently for each of the quarters presented; accordingly, the sum of the quarterly net income per share may not equal the total computed for the year.
(2)Gross profit is defined as net product revenues less cost of product revenues.
(3)
Includes $2.9 million impact on net gain attributable to Kopin Corporation relating to the gain on an equity investment for the three month period ended March 31, 2018.
(4)
Includes $1.3 million impact from correction adjustments. For discussion of the correcting adjustments, see Note 18 - Correction of Previously Issued Financial Statements.
Quarterly Periods During Fiscal Year Ended December 30, 2017:
(in thousands, except per share data)Three months
ended
April 1, 2017
 Three months
ended
July 1, 2017
 Three months
ended
September 30, 2017
 
Three months
ended
December 30,
2017
(3)
Total revenue$4,378
 $5,927
 $6,139
 $11,397
Gross profit (2)
816
 862
 1,444
 3,654
Loss from operations(8,663) (8,068) (8,605) (4,962)
Net loss attributable to the controlling interest(7,858) (7,332) (8,247) (1,803)
Net loss per share (1):
       
Basic and diluted$(0.12) $(0.10) $(0.11) $(0.02)
Weighted average number of common shares outstanding:       
Basic and diluted64,539
 70,627
 72,188
 72,349


(1)Net loss per share is computed independently for each of the quarters presented; accordingly, the sum of the quarterly net income per share may not equal the total computed for the year.
(2)Gross profit is defined as net product revenues less cost of product revenues.
(3)Includes $1.7 million impact on net gain attributable to Kopin Corporation relating to the gain on a warrant for the three month period ended December 30, 2017.



60




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

16. Related Party Transactions

The Company may from time to time enter into agreements with shareholders, affiliates and other companies engaged in certain aspects of the display, electronics, optical and software industries as part of our business strategy. In addition, the wearable computing product market is relatively new and there may be other technologies the Company needs to purchase from affiliates in order to enhance its product offering.

The Company and Goertek have entered into agreements to jointly develop and commercialize a range of technologies and wearable products. These include: a mutually exclusive supply and manufacturing arrangement for a certain display product for twenty four months after mass production begins; an agreement that provides the Company with the right of first refusal to invest in certain manufacturing capacity for certain products with Goertek; an agreement whereby Goertek will provide system level original equipment manufacturing services for the Company'sCompany’s wearable products; an arrangement whereby the Company will supply display modules for Goertek'sGoertek’s virtual reality and augmented reality products; and other agreements related to promotion around certain products as well as providing designs relating to head mounted displays.

The Company and RealWear, Inc. (“RealWear”) have entered into agreements where the Company has agreed to supply display modules forto RealWear, Inc.'s augmented reality products. The Company has also licensedand license certain intellectual property to RealWear, Inc. andRealWear. In conjunction with these agreements the Company received a 15% warrantan equity interest in RealWear, Inc.'s next equity offering round, which was exercised in April 2018. Theone-time $1.5 million license fees and will receive royalties of future product sales. In May 2019, the Company also received a $1.5 has signed an additional agreement to license certain intellectual property to Realwear for $3.5 million license fee and additional sales-based royalties. Of the $3.5 million license fee, $2.5 million was paid upon signing of the license agreement and the other $1.0 million was paid in quarterly installments of $0.25 million. Additionally, in the second quarter of 2019, we made an additional equity investment in RealWear of $2.5 million as part of an equity raise by RealWear. As of December 25, 2021, we owned approximately 2.8% of RealWear. In the fourth quarter of 2019 Kopin reviewed the financial condition and other factors of RealWear and as a result, in the fourth quarter of 2019, we recorded an impairment charge of $5.2 million to reduce our investment in RealWear to zero as of December 25, 2021.

On September 30, 2019, the Company entered into an Asset Purchase Agreement (the “Solos Purchase Agreement”) with Solos Technology Limited (“Solos Technology”). Pursuant to the Solos Purchase Agreement, the Company sold and licensed to Solos Technology certain assets of our SolosTM (“Solos”) product line and WhisperTM Audio (“Whisper”) technology. As consideration for the intellectual property licensed to RealWear, Inc. andtransaction the Company is entitledreceived 1,172,000 common shares representing a 20.0% equity stake in Solos Technology’s parent company, Solos Incorporation (“Solos Inc.”). In addition, the Company has agreed to receive sales-based royaltiesreimburse Solos Technology for sales support provided. Solos Technology has agreed to reimburse the Company for the employee’s time spent on Solos development. As of December 25, 2021, and December 26, 2020, the Company had less than $10,000 and $283,000 respectively of receivables outstanding from RealWear,Solos Technology and had a payable of less than $10,000 to Solos Technology.

The Company has warrants to purchase shares of Preferred Stock of HMDmd. The fair value of the investment was determined to be $300,000 as of December 25, 2021.

As of December 25, 2021, the Company’s CEO and Chairman, Dr. John C.C. Fan, has an individual ownership interest of 15.7% (14.4% fully diluted) of Solos Inc.

Two of Dr. Fan’s family members have also invested in Solos Inc., and collectively hold a 37.5% (34.4% fully diluted) ownership interest in Solos Inc.

During fiscal years 2018, 20172021, 2020 and 2016,2019, the Company had the following transactions with related parties:

 2018 2017 2016
 Revenue Purchases Revenue Purchases Revenue Purchases
Goertek$
 $646,135
 $
 $727,101
 $
 $
RealWear, Inc.1,220,838
 
 576,644
 
 
 
 $1,220,838
 $646,135
 $576,644
 $727,101
 $
 $

Schedule of Transactions with Related Parties

  2021  2020  2019 
  Revenue  Purchases  Revenue  Purchases  Revenue  Purchases 
Goertek $  $  $  $  $  $747,154 
RealWear, Inc.  3,762,638      2,678,335      5,778,672    
HMDmd, Inc.  656,805                
  $4,419,443  $  $2,678,335  $  $5,778,672  $747,154 

At December 29, 201825, 2021 and December 30, 2017,26, 2020, the Company had the following receivables and payables with related parties:

 December 29, 2018 December 30, 2017
 Receivables Contract Assets Payables Receivables Payables
Goertek$
 $
 $207,530
 $
 $326,877
RealWear, Inc.1,041,334
 400,000
 
 414,635
 
 $1,041,334
 $400,000
 $207,530
 $414,635
 $326,877



  December 25, 2021  December 26, 2020 
  Receivables  Payables  Receivables  Payables 
RealWear, Inc. $306,307  $  $817,388  $ 
Solos Technology  8,422          
  $314,729  $  $817,388  $ 

17. Subsequent Events

The Company conducted an evaluation and no subsequent events were identified.

18. Valuation and Qualifying Accounts

The following table sets forth activity in Kopin'sKopin’s allowance for doubtful accounts:

Fiscal year ended:
Balance at
Beginning
of Year
 
Additions
Charged
to
Income
 
Deductions
from
Reserve
 
Balance at
End of
Year
December 31, 2016$153,000
 $
 $(17,000) $136,000
December 30, 2017136,000
 13,000
 
 149,000
December 29, 2018$149,000
 $268,000
 $(113,000) $304,000






61




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

18.    CorrectionSchedule of Previously Issued Financial Statements
Subsequent to filing its Original Form 10-K, the Company identified that its consolidated financial statements were incorrect because of certain errors impacting noncontrolling interest in connection with its Korean subsidiary Kowon. Accordingly, the accompanying consolidated financial statements as of December 29, 2018Valuation and for the three years in the period ended December 29, 2018, have been revised to correct these errors. A summary of these errors and their impact on the consolidated financial statements are as follows:
Qualifying Accounts

Fiscal year ended: Balance at
Beginning
of Year
  Additions
Charged
to
Income
  Deductions
from
Reserve
  Balance at
End of
Year
 
December 28 2019  304,000   951,000   (317,000)  938,000 
December 26, 2020  938,000   42,000   (805,000)  175,000 
December 25, 2021 $175,000  $55,000  $(80,000) $150,000 

1.
The Company improperly calculated the noncontrolling interest amount of Kowon when the Company made equity investments in years prior to 2015. The Company has corrected for this misstatement in the accompanying Consolidated Statements of Stockholders’ Equity, which resulted in a decrease to additional paid-in capital and an increase to noncontrolling interest of $1.2 million as of December 26, 2015. This correction impacted the respective equity categories in the accompanying Consolidated Statements of Stockholders’ Equity and Consolidated Balance Sheets for 2016, 2017 and 2018.
71
2.
In 2016, upon recognition of a gain on sale of Kowon assets, the Company did not properly allocate the portion of the gain attributable to the noncontrolling interest in the amount of $0.1 million. The Company has corrected for this misstatement in the accompanying 2016 Consolidated Statement of Operations, which consequently impacts the accompanying Consolidated Statements of Stockholders’ Equity by increasing accumulated deficit and increasing noncontrolling interest for $0.1 million as of December 31, 2016.
3.
In 2018, when the Company liquidated Kowon, it was carrying approximately $1.7 million in cumulative translation adjustments ("CTA") related to Kowon's net assets. Approximately $0.4 million of CTA was correctly reclassified into earnings in 2018, however, the remaining $1.3 million was incorrectly reclassified directly to noncontrolling interest to offset cumulative understatement in noncontrolling interest that resulted from the two prior period errors noted above. This caused the net loss in the accompanying 2018 Consolidated Statement of Operations to be overstated by $1.3 million, which the Company has corrected in the accompanying Consolidated Statements of Operations.
4.
In addition, in connection with the liquidation of Kowon, the Company understated its distribution to the noncontrolling interest holder in the accompanying 2018 Consolidated Statement of Cash Flows by less than $0.1 million, which the Company has corrected in the accompanying Consolidated Statements of Cash Flows.

62





NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

The effects of these adjustments on the consolidated statements of stockholders’ equity are as follows:

 Addition Paid-in Capital Accumulated Deficit Noncontrolling Interest
 As Previously ReportedAdjustmentAs Revised As Previously ReportedAdjustmentAs Revised As Previously ReportedAdjustmentAs Revised
Balance at December 26, 2015326,558,527
(1,201,482)325,357,045
 (190,608,671)
(190,608,671) (256,096)1,201,482
945,386
Net (loss) income


 (23,434,116)(134,601)(23,568,717) 402,971
134,601
537,572
Balance at December 31, 2016328,524,644
(1,201,482)327,323,162
 (214,042,787)(134,601)(214,177,388) 141,957
1,336,083
1,478,040
Balance at December 30, 2017331,119,340
(1,201,482)329,917,858
 (240,121,901)(134,601)(240,256,502) (719,422)1,336,083
616,661
Distribution to noncontrolling interest holder


 


 636,978
(1,336,083)(699,105)
Net (loss) income


 (35,869,625)1,336,083
(34,533,542) 51,050

51,050
Balance at December 29, 2018335,692,879
(1,201,482)334,491,397
 (272,932,143)1,201,482
(271,730,661) (149,053)
(149,053)





63




NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (CONTINUED)

The effects of these adjustments on the consolidated statements of operations are as follows:
 As Previously Reported Adjustment As Revised
2018     
Foreign currency transaction gains (losses)$(166,829) $1,336,083
 $1,169,254
2016     
Net income attributable to noncontrolling interest402,971
 134,601
 537,572
Net loss attributable to Kopin Corporation$(23,434,116) $(134,601) $(23,568,717)

The effects of these adjustments on the consolidated statements of cash flows are as follows:
 As Previously Reported Adjustment As Revised
2018     
Cash flows from operating activities:    
Net loss$(35,818,575) $1,336,083
 $(34,482,492)
Foreign currency (gains) losses177,469
 (1,273,956) (1,096,487)
Cash flows from financing activities     
Distribution to noncontrolling interest holder$(636,978) $(62,127) $(699,105)

The above referenced adjustments do not impact the consolidated statement of operations for the fiscal year ended December 30, 2017 or the consolidated statements of cash flows for the fiscal years ended December 30, 2017 and December 31, 2016.
Although the Company does not believe such misstatements are material to the previously issued consolidated financial statements, for comparability purposes, the Company has revised the previously issued consolidated financial statements to correct the misstatements.


64





INDEX TO EXHIBITS

Exhibits
3.1
Exhibits
3.1
Amended and Restated Certificate of Incorporation filed as an exhibit to Registration Statement on Form S-1, File No. 33-57450, and incorporated herein by reference.



44.1
Specimen Certificate of Common Stock filed as an exhibit to Registration Statement on Form S-1, File No. 33-45853, and incorporated herein by reference.
10.14.2
Description of the Registrant’s Securities Registered Pursuant to Section 12 of the Securities Exchange Act of 1934 filed as an exhibit to Annual Report on Form 10-K for the fiscal year ended December 26, 2020 and incorporated herein by reference.
10.1Form of Employee Agreement with Respect to Inventions and Proprietary Information filed as an exhibit to Registration Statement on Form S-1, File No. 33-45853, and incorporated herein by reference.






10.8*
Form of Key Employee Stock Purchase Agreement filed as an exhibit to Registration Statement on Form S-1, File No. 33-45853, and incorporated herein by reference. *
10.9
License Agreement by and between the Company and Massachusetts Institute of Technology dated April 22, 1985, as amended, filed as an exhibit to Registration Statement on Form S-1, File No. 33-45853, and incorporated herein by reference.
10.10
Facility Lease, by and between the Company and Massachusetts Technology Park Corporation, dated October 15, 1993 filed as an exhibit to Annual Report on Form 10-K for the fiscal year ended December 31, 1993 and incorporated herein by reference.







Offer Letter, dated January 17, 2019, by and between Kopin Corporation and Paul Baker filed as an exhibit to the Current Report on Form 8-K filed on January 22, 2019 and incorporated by reference herein.
10.16†
Asset Purchase Agreement, dated January 10, 2013,September 30, 2019, by and amongbetween Kopin Corporation, IQE KC, LLCKopin Display Corporation and IQE plcSolos Technology Limited.

72

10.17*Kopin Corporation 2020 Equity Incentive Plan filed as an exhibit to Current ReportForm on Form 8-K on January 10, 2013May 20, 2020 and incorporated by reference herein.
10.18*
Tenth Amended and Restated Employment Agreement between the Company and Dr. John C.C. Fan, dated as of December 31, 2020, filed as an exhibit to the Annual Report on Form 10-K for the fiscal year ended December 26, 2020 and incorporated herein by reference
21.1


65









101.0
The following materials from the Company’s Annual Report on Form 10-K/A10-K for the fiscal year ended December 29, 2018,25, 2021, formatted in Inline XBRL (Extensible Business Reporting Language): (i) Consolidated Balance Sheets, (ii) Consolidated Statements of Operations, (iii) Consolidated Statements of Comprehensive Loss, (iv) Consolidated Statements of Stockholder'sStockholder’s Equity, (v) Consolidated Statements of Cash Flows, and (vi) Notes to Consolidated Financial Statements, tagged as blocks of text.
104The cover page from the Company’s Annual Report on Form 10-K for the fiscal year ended December 25, 2021, formatted in Inline XBRL and contained in Exhibit 101.
*
*Management contract or compensatory plan required to be filed as an Exhibit to this Form 10-K/A.10-K.
Portions of this exhibit and the schedules thereto, marked by brackets, have been omitted pursuant to Item 601(b)(10) of Regulation S-K.

Item 16.Form 10-K Summary

Not applicable.

73


66





SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

March 14, 2022

KOPIN CORPORATION
By:/s/ JOHN C.C. FAN

John C.C. Fan

Chairman of the Board, Chief Executive Officer, President and Director

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant in the capacities and on the dates indicated.

SignatureTitleDate
/s/ JOHN C.C. FANChairman of the Board, Chief Executive Officer, President
John C.C. Fanand Director (Principal Executive Officer)March 14, 2022
/s/ JAMES BREWINGTONDirector
James BrewingtonMarch 14, 2022
Director
David E. Brook
KOPIN C
ORPORATIONMarch 14, 2022
Dated: November 7, 2019By:
/s/ RJill AveryICHARD
 A. SNEIDERDirector
Jill Avery
Richard
March 14 2022
/s/ CHI CHIA HSIEHDirector
Chi Chia HsiehMarch 14, 2022
/s/ SCOTT L. ANCHINDirector
Scott L. AnchinMarch 14, 2022
/s/ RICHARD A. Sneider
SNEIDER
Treasurer and Chief Financial Officer (Principal
Richard A. Sneider(Principal Financial and Accounting Officer)March 14, 2022

74



67