UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-Q
   
þ QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES AND EXCHANGE ACT OF 1934
For the quarterly period ended DecemberMarch 31, 20062007
or
   
o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15 (d) OF THE SECURITIES AND EXCHANGE ACT OF 1934
For the transition period from ___to ___to
Commission file number1-5978
SIFCO Industries, Inc.
(Exact name of registrant as specified in its charter)
   
Ohio 34-0553950
   
(State or other jurisdiction of incorporation or organization) (I.R.S. Employer Identification No.)
   
970 East 64th Street, Cleveland Ohio 44103
   
(Address of principal executive offices) (Zip Code)
(216) 881-8600
(Registrant’s telephone number, including area code)
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by section 13 or 15(d) of the Securities and Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yesþ Noo
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filero      Accelerated filero      Non-accelerated filerþ
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
Yeso Noþ
The number of the Registrant’s Common Shares outstanding at DecemberMarch 31, 20062007 was 5,229,891.
 
 

 


TABLE OF CONTENTS

Part I. Financial Information
Item 1. Financial Statements
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
Item 3. Quantitative and Qualitative Disclosures Aboutabout Market Risk
Item 4. Controls and Procedures
Part II. Other Information
Item 1. Legal Proceedings
Item 2. Change in Securities and Use of Proceeds
Item 3. Defaults upon Senior Securities
Item 4. Submission of Matters to a Vote of Security Holders
Item 5. Other Information
Item 6. Exhibits
SIGNATURES
EX-4.23
EX-9.3
EX-10.17
EX-10.18EX-4.24
EX-31.1
EX-31.2
EX-32.1
EX-32.2


Part I.Financial Information
Item 1. Financial Statements
SIFCO Industries, Inc. and Subsidiaries
Consolidated Condensed Statements of Operations
(Unaudited)
(Amounts in thousands, except per share data)
                        
 Three Months Ended  Three Months Ended Six Months Ended 
 December 31,  March 31, March 31, 
 2006 2005  2007 2006 2007 2006 
Net sales $21,453 $19,820  $21,520 $18,553 $40,656 $32,057 
Operating expenses and other: 
Operating expenses: 
Cost of goods sold 17,671 18,011  15,728 14,858 30,683 26,387 
Selling, general and administrative expenses 3,479 3,270  2,678 2,594 5,278 5,180 
Loss on disposal of operating assets 4 4 4 4 
              
  
Total operating expenses 21,150 21,281  18,410 17,456 35,965 31,571 
              
  
Operating income (loss) 303  (1,461)
Operating income 3,110 1,097 4,691 486 
  
Interest income  (47)  (8)  (1)  (18)  (2)  (36)
Interest expense 19 41  39 26 54 33 
Foreign currency exchange loss (gain), net 235  (24)  (1) 3  (8) 11 
Other income, net  (2,112)  (17)  (4)  (37)  (33)  (39)
              
  
Income (loss) before income tax provision 2,208  (1,453)
Income from continuing operations before income tax provision 3,077 1,123 4,680 517 
  
Income tax provision 31 13  81 7 112 20 
         
 
Income from continuing operations $2,996 1,116 4,568 497 
 
Loss from discontinued operation, net of tax  (970)  (1,749)  (365)  (2,596)
              
  
Net income (loss) $2,177 $(1,466) 2,026 $(633) $4,203 $(2,099)
              
  
Net income (loss) per share (basic) $0.42 $(0.28)
Net income (loss) per share (diluted) $0.42 $(0.28)
Income per share from continuing operations 
Basic $0.57 $0.21 $0.87 $0.10 
Diluted $0.57 $0.21 $0.87 $0.10 
 
Loss per share from discontinued operations, net of tax 
Basic $(0.19) $(0.33) $(0.07) $(0.50)
Diluted $(0.19) $(0.33) $(0.07) $(0.50)
 
Net income (loss) per share 
Basic $0.39 $(0.12) $0.80 $(0.40)
Diluted $0.38 $(0.12) $0.80 $(0.40)
  
Weighted-average number of common shares (basic) 5,226 5,222  5,230 5,222 5,228 5,222 
Weighted-average number of common shares (diluted) 5,238 5,222  5,276 5,228 5,254 5,225 
See notes to unaudited consolidated condensed financial statements.

2


SIFCO Industries, Inc. and Subsidiaries
Consolidated Condensed Balance Sheets
(Amounts in thousands, except per share data)
                
 December 31, September 30,  March 31, September 30, 
 2006 2006  2007 2006 
 (unaudited)  (unaudited) 
ASSETS
  
 
Current Assets:  
Cash and cash equivalents $3,813 $4,744  $3,915 $4,744 
Receivables, net 18,417 18,652  18,308 18,652 
Inventories 9,594 8,052  12,335 8,052 
Refundable income taxes 16 188  17 188 
Prepaid expenses and other current assets 658 601  577 601 
Assets held for sale 4,752  
          
  
Total current assets 32,498 32,237  39,904 32,237 
  
Property, plant and equipment, net 14,966 14,059  13,295 14,059 
  
Other assets 2,454 2,479  2,367 2,479 
          
  
Total assets $49,918 $48,775  $55,566 $48,775 
          
  
LIABILITIES AND SHAREHOLDERS’ EQUITY
  
 
Current liabilities:  
Current maturities of long-term debt $32 $52  $2 $52 
Accounts payable 10,808 10,454  11,683 10,454 
Accrued liabilities 6,172 6,720  6,018 6,720 
          
  
Total current liabilities 17,012 17,226  17,703 17,226 
  
Long-term debt, net of current maturities 534 427  2,666 427 
  
Other long-term liabilities 3,926 5,939  4,034 5,939 
  
Shareholders’ equity:  
Serial preferred shares, no par value, authorized 1,000 shares      
Common shares, par value $1 per share, authorized 10,000 shares; issued and outstanding 5,230 and 5,222 shares at December 31, 2006 and September 30, 2006, respectively 5,230 5,222 
Common shares, par value $1 per share, authorized 10,000 shares; issued and outstanding 5,230 and 5,222 shares at March 31, 2007 and September 30, 2006 5,230 5,222 
Additional paid-in capital 6,353 6,323  6,359 6,323 
Retained earnings 25,277 23,100  27,303 23,100 
Accumulated other comprehensive loss  (8,414)  (9,462)  (7,729)  (9,462)
          
  
Total shareholders’ equity 28,446 25,183  31,163 25,183 
          
  
Total liabilities and shareholders’ equity $49,918 $48,775  $55,566 $48,775 
          
See notes to unaudited consolidated condensed financial statements.

3


SIFCO Industries, Inc. and Subsidiaries
Consolidated Condensed Statements of Cash Flows
(Unaudited)
(Amounts in thousands)
                
 Three Months Ended  Six Months Ended 
 December 31,  March 31, 
 2006 2005  2007 2006 
Cash flows from operating activities:  
Net income (loss) $2,177 $(1,466) $4,203 $(2,099)
Loss from discontinued operations, net of tax  365  2,596 
Adjustments to reconcile net income (loss) to net cash provided by (used for) operating activities:  
Depreciation and amortization 551 811  699 706 
Gain on disposal of assets  (23)  
Proceeds from exercise of stock options and share transactions under employee stock plan 36 36 
Loss (gain) on disposal of property, plant and equipment  (19) 3 
Share transactions under employee stock plan 44 72 
  
Changes in operating assets and liabilities:  
Receivables 374 3,036   (3,034)  (2,943)
Inventories  (1,523)  (1,788)  (4,636)  (954)
Refundable income taxes 188  (4)  (9)  (13)
Prepaid expenses and other current assets  (46)  (119) 60  (50)
Other assets 24 65  112 81 
Accounts payable 293 500  1,200 1,509 
Accrued liabilities  (608)  (180)  (392)  (19)
Other long-term liabilities  (2,202)  (13) 8  (103)
          
  
Net cash provided by (used for) operating activities  (759) 878 
Net cash used for operating activities of continuing operations  (1,399)  (1,214)
Net cash provided by (used for) by operating activities of discontinued operations  (933) 1,227 
  
Cash flows from investing activities:
  
Capital expenditures  (548)  (214)  (862)  (515)
Proceeds from disposal of assets 33  
Proceeds from disposal of property, plant and equipment 32  
Acquisition of business, net of cash acquired   (427)   (436)
Other 30  (25) 24  (2)
          
  
Net cash used for investing activities  (485)  (666)
Net cash used for investing activities of continuing operations  (806)  (953)
Net cash used for investing activities of discontinued operations  (36)  (82)
  
Cash flows from financing activities:  
Proceeds from debt purchase agreement  5,600 
Repayments of debt purchase agreement   (7,136)
Proceeds from revolving credit agreement 5,848 1,482  13,955 7,699 
Repayments of revolving credit agreement  (5,741)  (791)  (12,234)  (5,468)
Proceeds from other debt 84   714 248 
Repayments of other debt  (107)    (249)  (270)
          
  
Net cash provided by (used for) financing activities 84  (845)
Net cash provided by financing activities of continuing operations 2,186 2,209 
Net cash used for financing activities of discontinued operations   (1,859)
          
  
Decrease in cash and cash equivalents  (1,160)  (633)  (988)  (672)
Cash and cash equivalents at the beginning of the period 4,744 884  4,744 884 
Effect of exchange rate changes on cash and cash equivalents 229   159  
          
  
Cash and cash equivalents at the end of the period $3,813 $251  $3,915 $212 
          
  
Supplemental disclosure of cash flow information:  
Cash paid for interest $(20) $(49) $(42) $(72)
Cash recovered from (paid for) income taxes, net 176  (531)
Cash paid for income taxes, net  (71)  (522)
See notes to unaudited consolidated condensed financial statements.

4


SIFCO Industries, Inc. and Subsidiaries
Notes to Unaudited Consolidated Condensed Financial Statements
(Amounts in thousands, except per share data)
1.Summary of Significant Accounting Policies
A. Principles of Consolidation
The unaudited consolidated condensed financial statements included herein include the accounts of SIFCO Industries, Inc. and its wholly-owned subsidiaries (the “Company”). All significant intercompany accounts and transactions have been eliminated. The U.S. dollar is the functional currency for all of the Company’s U.S. operations and, effective October 1, 2006, the euro is the functional currency of the Company’s Irish subsidiary. Prior to the sale in 2006 of the large aerospace portion of the Irish subsidiary’s turbine engine component repair business, a substantial majority of the transactions of the Company’s Irish subsidiary were denominated in U.S. dollars and, therefore, its functional currency was the U.S. dollar. In the opinion of management, all adjustments, which include only normal recurring adjustments necessary for a fair presentation of the results of operations, financial position, and cash flows for the periods presented, have been included.
These unaudited consolidated condensed financial statements should be read in conjunction with the consolidated financial statements and related notes included in the Company’s fiscal 2006 Annual Report on Form 10-K. The results of operations for any interim period are not necessarily indicative of the results to be expected for other interim periods or the full year. Certain prior period amounts have been reclassified in order to conform to current period classifications.
B. Stock-Based Compensation
The Company awarded stock options under its shareholder approved 1995 Stock Option Plan (“1995 Plan”) and 1998 Long-term Incentive Plan (“1998 Plan”). No further options may be awarded under either the 1995 Plan or the 1998 Plan. Option exercise price is not less than fair market value on date of grant and options are exercisable no later than ten years from date of grant. Options issued under all plans generally vest at a rate of 25% per year.
Aggregate option activity is as follows:
                                
 Weighted-    Weighted-  
 Weighted- Average    Weighted- Average  
 Average Remaining Aggregate  Average Remaining Aggregate
 Number of Exercise Contractual Intrinsic  Number of Exercise Contractual Intrinsic
 Options Price Term (Years) Value  Options Price Term (Years) Value
September 30, 2006 261,000 $6.55  261,000 $6.55 
  
Options granted      
Options exercised  (8,000) $3.56   (8,000) $3.56 
Options canceled  (31,500) $5.94   (31,500) $5.94 
      
  
December 31, 2006 221,500 $6.94 4.9 $(347)
March 31, 2007 221,500 $6.74 4.7 $628 
      
  
Vested or expected to vest at December 31, 2006 218,000 $6.79 4.9 $(352)
Exercisable at December 31, 2006 175,250 $7.36 4.0 $(415)
Vested or expected to vest at March 31, 2007 215,500 $6.83 4.6 $593 
Exercisable at March 31, 2007 175,250 $7.36 3.8 $356 
As of DecemberMarch 31, 2006,2007, there was $41$35 of total unrecognized compensation cost related to the unvested stock options granted under the Company’s stock option plans. That cost is expected to be recognized over a weighted average period of 1.41.2 years.
Under the Company’s restricted stock program, Common Shares of the Company may be granted at no cost to certain employees. These shares vest over either a four or five-year period, with either 25% or 20% vesting each year, respectively. Under the terms of the program, participants will not be entitled to dividends nor voting rights until the shares have vested. Upon issuance of Common Shares under the program, unearned compensation equivalent to the market value of the Common Shares at the date of award is charged to shareholders’ equity and subsequently amortized to expense over the vesting periods. All such compensation expense was fully amortized and recognized as of September 30, 2006. Compensation expense related to amortization of unearned compensation was $17$35 in the threesix months ended DecemberMarch 31, 2005.2006.

5


2.Inventories
Inventories consist of:
                
 December 31, September 30,  March 31, September 30, 
 2006 2006  2007 2006 
Raw materials and supplies $4,555 $3,220  $4,766 $3,220 
Work-in-process 3,321 3,222  5,411 3,222 
Finished goods 1,718 1,610  2,158 1,610 
          
  
Total inventories $9,594 $8,052  $12,335 $8,052 
          
Inventories are stated at the lower of cost or market. Cost is determined using the last-in, first-out (“LIFO”) method for 67%76% and 59% of the Company’s inventories at DecemberMarch 31, 20062007 and September 30, 2006, respectively. Cost is determined using the specific identification method for approximately 10%9% and 12% of the Company’s inventories at DecemberMarch 31, 20062007 and September 30, 2006, respectively. The first-in, first-out (“FIFO”) method is used for the remainder of the inventories. If the FIFO method had been used for the inventories for which cost is determined using the LIFO method, inventories would have been $6,979$7,136 and $6,860 higher than reported at DecemberMarch 31, 20062007 and September 30, 2006, respectively.
3.Comprehensive Income (Loss) and Accumulated Other Comprehensive Loss
Total comprehensive income (loss) is as follows:
                        
 Three Months Ended  Three Months Ended Six Months Ended 
 December 31,  March 31, March 31, 
 2006 2005  2007 2006 2007 2006 
Net income (loss) $2,177 $(1,466) $2,026 $(633) $4,203 $(2,099)
Foreign currency translation adjustment 1,048  (33) 685 30 1,733  (3)
Currency exchange contract adjustment   (67)  268  201 
              
  
Total comprehensive income (loss) $3,225 $(1,566) $2,711 $(335) $5,936 $(1,901)
              
The components of accumulated other comprehensive loss are as follows:
                
 December 31, September 30,  March 31, September 30, 
 2006 2006  2007 2006 
Foreign currency translation adjustment $(5,595) $(6,643) $(4,910) $(6,643)
Minimum pension liability adjustment  (2,819)  (2,819)  (2,819)  (2,819)
          
  
Total accumulated other comprehensive loss $(8,414) $(9,462) $(7,729) $(9,462)
          
4.Long-Term Debt
In February 2007, the Company entered into an agreement with its bank to extend the maturity date of its revolving credit agreement to April 1, 2008. In May 2007, the Company entered into an agreement with its bank to extend the maturity date of its revolving credit agreement to October 1, 2008. The Company was in compliance with all applicable covenants as of DecemberMarch 31, 2006.2007.
5.Business Segments
The Company identifies reportable segments based upon distinct products manufactured and services provided. The Aerospace Component Manufacturing Group consists of the production, heat treatment and some machining of forgings in various alloys utilizing a variety of processes for application in the aerospace industry. The Turbine Component Services and Repair Group (“Repair Group”) consists primarily of the repair and remanufacture of small aerospace and industrial turbine engine components. The Repair Group is also involved in precision component machining and high-temperature resistant industrial coating applications for turbine engine components. The Applied Surface Concepts Group is a provider of specialized selective electrochemical metal finishing processes and services used to apply metal coatings to a selective area of a component. The Company’s reportable segments are separately managed.

6


Segment information is as follows:
                        
 Three Months Ended  Three Months Ended Six Months Ended 
 December 31,  March 31, March 31, 
 2006 2005  2007 2006 2007 2006 
Net sales:  
Aerospace Component Manufacturing Group $12,992 $8,196  $14,563 $11,962 $27,555 $20,159 
Turbine Component Services and Repair Group 5,046 8,916  3,084 3,294 5,814 5,893 
Applied Surface Concepts Group 3,415 2,708  3,873 3,297 7,287 6,005 
              
  
Consolidated net sales $21,453 $19,820 
Consolidated net sales from continuing operations $21,520 $18,553 $40,656 $32,057 
              
  
Operating income (loss):  
Aerospace Component Manufacturing Group $1,649 $92  $2,905 $990 $4,554 $1,082 
Turbine Component Services and Repair Group  (1,441)  (950) 141 166  (22) 66 
Applied Surface Concepts Group 383  (66) 404 103 787 37 
Corporate unallocated expenses  (288)  (537)  (340)  (162)  (628)  (699)
              
  
Consolidated operating income (loss) 303  (1,461)
Consolidated operating income from continuing operations 3,110 1,097 4,691 486 
  
Interest (income) expense, net  (28) 33 
Interest expense, net 38 8 52  (3)
Foreign currency exchange loss (gain), net 235  (24)  (1) 3  (8) 11 
Other income, net  (2,112)  (17)  (4)  (37)  (33)  (39)
              
  
Consolidated income (loss) before income tax Provision $2,208 $(1,453)
Consolidated income from continuing operations before income tax provision $3,077 $1,123 $4,680 $517 
              
6.Retirement Benefit Plans
The Company and certain of its subsidiaries sponsor defined benefit pension plans covering most of its employees. The components of net periodic benefit cost of the Company’s defined benefit plans are as follows:
                        
 Three Months Ended  Three Months Ended Six Months Ended 
 December 31,  March 31, March 31, 
 2006 2005  2007 2006 2007 2006 
Service cost $70 $230  $69 $230 $139 $460 
Interest cost 252 365  252 366 504 731 
Expected return on plan assets  (302)  (392)  (301)  (392)  (603)  (784)
Amortization of prior service cost 33 33  33 33 66 66 
Amortization of net loss 29 76 
Amortization of net (gain) loss 33 75 62 151 
              
  
Net periodic benefit cost $82 $312  $86 $312 $168 $624 
              
Through DecemberMarch 31, 2006,2007, the Company has made $411$583 of contributions to its defined benefit pension plans. The Company anticipates contributing an additional $721$381 to fund its defined benefit pension plans during the balance of fiscal 2007, resulting in total projected contributions of $1,132$964 in fiscal 2007.
7.Government Grants
The Company receivesreceived grants from certain government entities as an incentive to invest in facilities, research and employees. The Company has historically elected to treat capital and employment grants as a contingent obligation and does not commence amortizing such grants into income until such time as it is more certain that the Company will not be required to repay a portion of these grants. Capital grants are amortized into income over the estimated useful lives of the related assets. Employment grants are amortized into income over five years.
Certain Company grants that were subject to repayment expired on December 31, 2006. Therefore, the Company will not be required to repay such grants. The related contingent obligation was treated as deferred grant revenue and recognized as income in accordance with the above described grant amortization method. Accordingly, the Company recognized grant income of approximately $2,100 in other income from discontinued operations during the threesix months ended DecemberMarch 31, 2006.2007. The

7


unamortized portion of deferred grant revenue recorded in other long-term liabilities at DecemberMarch 31, 20062007 and September 30, 2006 was $402$431 and $2,423, respectively.

7


Prior to expiration, grants may be repayable in certain circumstances, principally upon the sale of related assets, or discontinuation or reduction of operations. The contingent liability for such potential repayments was $71$72 and $2,061 at DecemberMarch 31, 20062007 and September 30, 2006, respectively.
8.Subsequent Event
Effective May 7, 2007, SIFCO Industries, Inc. (“SIFCO”) and its Irish subsidiary, SIFCO Turbine Components Limited (“SIFCO Turbine”), entered into a business purchase agreement (the “Agreement”) for the sale of its industrial turbine engine component repair business to PAS Technologies Inc., which is based in the United States (“PAS”). PAS will complete the acquisition through a wholly-owned Irish subsidiary named PAS Turbines Ireland. The industrial turbine engine component repair business operates in SIFCO’s Cork, Ireland facility. Subject to satisfaction of certain customary conditions to closing, the transaction is expected to close on or about June 16, 2007. Total consideration for the business is approximately $5,000 payable in cash and subject to certain adjustment and/or escrow provisions under the Agreement. The assets that are to be sold have a net book value at March 31, 2007 of approximately $4,800 (accounts receivable, $2,300; inventory, $400; and machinery and equipments, $2,100) and are classified as assets held for sale. SIFCO Turbine will retain ownership of the Cork, Ireland facility (subject to a long-term lease arrangement with PAS Turbines Ireland) and substantially all existing liabilities of the business. SIFCO has agreed to guarantee the performance by SIFCO Turbine of all of its obligations under the Agreement.
The closing of the transaction is subject to certain customary conditions to closing, unless otherwise waived by the parties, including (i) no material adverse event (as defined in the Agreement) having occurred and (ii) regulatory and third party consents having been obtained. The Agreement may be terminated by PAS if the conditions to closing have not or cannot be fulfilled prior to the closing date. The Agreement terminates by its terms if the closing has not occurred by June 16, 2007. Upon completion of this transaction, SIFCO will no longer maintain a turbine engine component repair operation in Ireland, however, SIFCO Turbine will continue to own and lease real estate in Ireland.
9.Asset Impairment
In connection with the sale of the industrial turbine engine component repair business and certain related assets, asset impairment charges totaling $80 related to machinery and equipment that were part of this sale were recorded during the second quarter of fiscal 2007 and are included in loss from discontinued operations, net of tax. Fair value of these assets was determined based on projected cash flows from the disposal of these assets.
10.Discontinued Operations
On May 10, 2006, the Company and its Irish subsidiary, SIFCO Turbine Components Limited (“SIFCO Turbine”) completed the sale of the large aerospace portion of its turbine engine component repair business and certain related assets. As explained more fully in Note 8, on May 7, 2007, the Company and SIFCO Turbine entered into an agreement for the sale of its industrial turbine engine component repair business and certain related assets. In accordance with Statement of Financial Accounting Standards No. 144, “Accounting for the Impairment or Disposal of Long-Lived Assets”, the financial results of both the large aerospace and industrial turbine engine component repair businesses, which together make up essentially all of SIFCO Turbine’s operations, are reported as discontinued operations for all periods presented in the Consolidated Condensed Statements of Operations. The financial results included in discontinued operations were as follows:
                 
  Three Months Ended Six Months Ended
  March 31, March 31,
  2007 2006 2007 2006
Net sales $2,070  $5,957  $4,387  $12,274 
Loss before income tax provision  (970)  (1,749)  (365)  (2,596)
Loss from discontinued operations, net of tax  (970)  (1,749)  (365)  (2,596)

8


Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
Management’s Discussion and Analysis of Financial Condition and Results of Operations may contain various forward-looking statements and includes assumptions concerning the Company’s operations, future results and prospects. These forward-looking statements are based on current expectations and are subject to risk and uncertainties. In connection with the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, the Company provides this cautionary statement identifying important economic, political and technological factors, among others, the absence or effect of which could cause the actual results or events to differ materially from those set forth in or implied by the forward-looking statements and related assumptions. Such factors include the following: (1) future business environment, including capital and consumer spending; (2) competitive factors, including the ability to replace business which may be lost due to increased direct involvement by the turbine engine manufacturers in turbine component service and repair markets; (3) successful procurement of certain repair materials and new repair process licenses from turbine engine manufacturers and/or the Federal Aviation Administration; (4) fluctuating foreign currency (primarily the euro) exchange rates; (5) metals and commodities price increases and the Company’s ability to recover such price increases; (6) successful development and market introductions of new products, including an advanced coating technologiestechnology and the continued development of industrial turbine repair processes; (7) regressive pricing pressures on the Company’s products and services, with productivity improvements as the primary means to maintain margins; (8) success with the further development of strategic alliances with certain turbine engine manufacturers for turbine component repair services; (9) the impact on business conditions, and on the aerospace industry in particular, of the global terrorism threat; (10) successful replacementcontinued reliance on consumer acceptance of declining demand for repair services forregional and business aircraft powered by more fuel efficient turboprop engine components with component repair services for smallengines vs. regional and business aircraft powered by turbofan engines utilized in the business and regional aircraft markets;engines; (11) continued reliance on several major customers for revenues; (12) the Company’s ability to continue to have access to its revolving credit facility, including the Company’s ability to (i) continue to comply with the terms of its credit agreements, including financial covenants, (ii) continue to enter into amendments to its credit agreement containing financial covenants, which it and its bank lender find mutually acceptable, or (iii) continue to obtain waivers from its bank lender with respect to its compliance with the covenants contained in its credit agreement; (13) the impact of changes in defined benefit pension plan actuarial assumptions and legislation on future contributions; and (14) stable governments, business conditions, laws, regulations and taxes in economies where business is conducted.
SIFCO Industries, Inc. and its subsidiaries engage in the production and sale of a variety of metalworking processes, services and products produced primarily to the specific design requirements of its customers. The processes and services include forging, heat-treating, coating, welding, machining and selective electrochemical finishing. The products include forgings, machined forged parts and other machined metal parts, remanufactured component parts for turbine engines, and selective electrochemical finishing solutions and equipment. The Company endeavors to plan and evaluate its businesses’ operations while taking into consideration certain factors including the following – (i) the projected build rate for commercial, business and military aircraft as well as the engines that power such aircraft, (ii) the projected maintenance, repair and overhaul schedules for commercial, business and military aircraft as well as the engines that power such aircraft, (iii) the projected maintenance, repair and overhaul schedules for industrial gas turbine engines, and (iv) anticipated exploration and production activities relative to oil and gas products, etc.
A. Results of Operations
ThreeSix Months Ended DecemberMarch 31, 20062007 Compared with ThreeSix Months Ended DecemberMarch 31, 20052006
In May 2007, SIFCO Industries, Inc. (“SIFCO”) and its Irish subsidiary, SIFCO Turbine Components Limited (“SIFCO Turbine”), which is a part of SIFCO’s Turbine Component Services and Repair Group, entered into a business purchase agreement (the “Agreement”) for the sale of its industrial turbine engine component repair business and certain related assets (“Industrial Repair”). This transaction is subject to certain customary conditions to closing. If such conditions are met, SIFCO expects the transaction to close in the third quarter of fiscal 2007.
Net sales from continuing operations in the first quartersix months of fiscal 2007 increased 8.2%26.8% to $21.5$40.7 million, compared with $19.8$32.1 million in the comparable period in fiscal 2006. Net incomeIncome from continuing operations in the first quartersix months of fiscal 2007 was $2.2$4.6 million, compared with a$0.5 million in the comparable period in fiscal 2006. Loss from discontinued operations, net loss of $1.5tax, which includes both the industrial repair business that is under an agreement to be sold and the large aerospace portion of SIFCO’s turbine engine component repair business that was sold in the third quarter of fiscal 2006, was $0.4 million in the first six months of fiscal 2007 and $2.6 million in the comparable period in fiscal 2006. Included in the $2.2$0.4 million of net incomeloss from discontinued operations in the first quartersix months of fiscal 2007 was $2.1 million of grant income related to the expiration of certain grants as explained more fully in Note 7 to the Unaudited Condensed Consolidated Condensed Financial Statements. Net income in the first six months of fiscal 2007 was $4.2 million, compared with a net loss of $2.1 million in the comparable period in fiscal 2006.

9


Aerospace Component Manufacturing Group (“ACM Group”)
Net sales in the first quartersix months of fiscal 2007 increased 58.5%36.7 % to $13.0$27.6 million, compared with $8.2$20.2 million in the comparable period of fiscal 2006. For purposes of the following discussion, the ACM Group considers aircraft that can accommodate less than 100 passengers to be small aircraft and those that can accommodate 100 or more passengers to be large aircraft. Net

8


sales of airframe components for small aircraft were $6.7increased $3.7 million to $14.2 million in the first quartersix months of fiscal 2007, compared with $3.5$10.5 million in the first quartercomparable period of fiscal 2006. Net sales of turbine engine components for small aircraft, which consist primarily of net sales of turbine engine components for business aircraft and regional commercial jets, as well as military transport and surveillance aircraft, increased $1.0$2.5 million to $3.8$7.9 million in the first quartersix months of fiscal 2007 compared with $2.8$5.4 million in the comparable period in fiscal 2006. Net sales of airframe components for large aircraft increased $0.7$1.6 million to $1.5$3.4 million in the first quartersix months of fiscal 2007, compared with $0.8$1.8 million in the comparable period inof fiscal 2006. Net sales of turbine engine components for large aircraft decreased $0.4$0.3 million to $0.3$0.6 million in the first quartersix months of fiscal 2007, compared with $0.7$0.9 million in the comparable period inof fiscal 2006. OtherCommercial product and non-product sales were $0.7$1.5 million and $0.5$1.6 million in the first quarterssix months of fiscal 2007 and 2006, respectively.
The ACM Group’s airframe and turbine engine component products have both military and commercial applications. Net sales of airframe and turbine engine components that solely have military applications were $5.6$11.6 million in the first quartersix months of fiscal 2007, compared with $2.8$8.5 million in the comparable period in fiscal 2006. This increase is attributable in part to increased military spending due to ongoing wartime demand such as for additional military helicopters and related replacement components.
During the first quartersix months of fiscal 2007, the ACM Group’s selling, general and administrative expensesexpense increased $0.2 million to $0.9$1.8 million, or 6.7%6.6% of net sales, compared with $0.6$1.6 million, or 7.9%7.8% of net sales, in the comparablesame period in fiscal 2006 period.2006. The $0.2 million increase in selling, general and administrative expenses in the first quartersix months of fiscal 2007 was principally due to increases in the ACM Group’s compensation expense, including incentive compensation, and variable selling costs and an increase in the reserve for bad debts. The increases in compensation ($0.1 million) and variable selling ($0.1 million) expenses were principally due to the overall significant increase in net sales and operating income during the first quartersix months of fiscal 2007, compared with the same period in fiscal 2006.
The ACM Group’s operating income in the first quartersix months of fiscal 2007 was $1.6$4.6 million, compared with $0.1$1.1 million in the same period in fiscal 2006. Operating results improved principallywere positively impacted in the first six months of fiscal 2007 compared with the same period in fiscal 2006 due primarily to the positive impact on margins of theresulting from significantly higher production and net sales volumes in the first quartersix months of fiscal 2007 compared with2007. The improved margins are due principally to (i) the same period in fiscal 2006. In addition, there wasabsorption of the ACM Group’s relatively high fixed operating costs over more units of production and sales and (ii) a $0.2$0.3 million reduction in the LIFO provision in the first quartersix months of fiscal 2007 compared to the same period in fiscal 2006.
The ACM Group’s backlog as of DecemberMarch 31, 20062007 was $73.2$81.7 million, compared with $65.7 million as of September 30, 2006. At DecemberMarch 31, 2006, $56.72007, $61.2 million of the total backlog was scheduled for delivery over the next twelve months and $0.8$20.5 million was on hold.scheduled for delivery beyond the next twelve months. All orders are subject to modification or cancellation by the customer with limited charges. The ACM Group believes that the backlog may not be indicative of actual sales for any succeeding period.
Turbine Component Services and Repair Group (“Repair Group”)
Net sales from continuing operations in the first quarter of fiscal 2007 decreased 43.4% to $5.0 million, compared with $8.9 million in the comparable fiscal 2006 period. Net sales of the large aerospace portion of the turbine engine component repair business that was sold during the third quarter of fiscal 2006, which includes component repair services and the sale of related replacement parts, were $4.4 million in the first quarter of fiscal 2006. The Repair Group’s remaining net sales in the first quartersix months of fiscal 2007, which includes (i)consists principally of component manufacturing, consisting ofrepair services (including precision component machining and industrial coating, and (ii) component repair servicescoating) for small aerospace turbine engines, and industrial turbine engines, increased 10.8%decreased 1.3% to $5.0$5.8 million, compared with $4.6$5.9 million in the comparable fiscal 2006 period. Demand for component repairs for small aerospace turbine engines and for component manufacturing increased, while demand for component repairs for industrial turbine engines remained flat, in the first quarter of fiscal 2007, compared with the comparable fiscal 2006 period.
During the first quartersix months of fiscal 2007, the Repair Group’s selling, general and administrative expenses increased $0.3 million to $1.3from continuing operations were $0.7 million or 25.3%11.2% of net sales, from $1.0 million, or 11.1% of net sales,and were essentially equal to such expenses in the comparable fiscal 2006 period. Included in the $1.3 million of selling, general and administrative expenses in the first quarter of fiscal 2007 were $0.5 million of severance and related charges associated with a management restructuring after the aforementioned sale of the large aerospace portion of the Repair Group’s business. The remaining selling, general and administrative expenses in the first quarters of fiscal 2007 and 2006 were $0.8 million, or 15.0% of net sales, and $1.0 million, or 11.1% of net sales, respectively.
The Repair Group’s operating lossresults from continuing operations in the first quartersix months of fiscal 2007 was $1.4 million,were essentially breakeven, compared with an operating lossincome of $1.0$0.1 million in the same period in fiscal 2006. Operating results in the first quarter of fiscal 2007 were negatively impacted by (i) the $0.5 million of aforementioned severance and related charges and (ii) the relatively low production and sales volumes for the component manufacturing and repair services related to the industrial turbine engine portion of the Repair Group’s non U.S. operations that remained after the sale of the large aerospace portion of such business. The Repair Group’s

9


sales volumes for the component manufacturing and repair services related to the industrial turbine engine portion of its operations, although growing, have not yet achieved the volumes required to cover the fixed costs inherent in such operation.
During the last half of fiscal 2006, and continuing into the first quarter of fiscal 2007, the U.S. dollar weakened against the euro. The Repair Group’s non-U.S. operation has less than a majority of its sales denominated in U.S. dollars while a significant majority of its operating costs are denominated in euros. Therefore, as the U.S. dollar weakens against the euro, costs denominated in euros are negatively impacted, to the extent that the collection of U.S dollars sales are used to satisfy such expenses, and the opposite is true when the U.S. dollar strengthens. The spot exchange rates in affect during the first quarter of fiscal 2007 were less favorable than the spot exchange rates in affect during the first quarter of fiscal 2006 and, therefore, the Repair Group’s operating results were negatively impacted by $0.1 million in the first quarter of fiscal 2007 compared to the same period in fiscal 2006 due to the less favorable exchange rates.
The Repair Group’s backlog related to continuing operations as of DecemberMarch 31, 2006,2007, was $4.9$4.8 million, compared with $3.5$2.7 million as of September 30, 2006. At DecemberMarch 31, 2006,2007, $2.9 million of the total backlog is scheduled for delivery over the next twelve months and $2.0$1.9 million was on hold. All orders are subject to modification or cancellation by the customer with limited charges. The Repair Group believes that the backlog may not be indicative of actual sales for any succeeding period.

10


Applied Surface Concepts Group (“ASC Group”)
Net sales of the ASC Group increased 26.1%21.4% to $3.4$7.3 million in the first quartersix months of fiscal 2007, compared with net sales of $2.7$6.0 million in the comparable period of fiscal 2006. In the first six months of fiscal 2007, product net sales, consisting of selective electrochemical finishing equipment and solutions, increased 9.6% to $3.5 million, compared with $3.1 million in the same period in fiscal 2006. In the first six months of fiscal 2007, customized selective electrochemical finishing contract service net sales increased 35.8% to $3.8 million, compared with $2.8 million in the same period in fiscal 2006.
During the first six months of fiscal 2007, The ASC Group’s selling, general and administrative expenses decreased $0.1 million to $2.2 million, or 30.0% of net sales, compared with $2.3 million, or 37.6% of net sales, in the first six months of fiscal 2006.
The ASC Group’s operating income in the first six months of fiscal 2007 was $0.8 million, compared with essentially breakeven operating results in the same period in fiscal 2006. Operating results improved principally due to the positive impact on margins of the significantly higher net sales volumes in the first six months of fiscal 2007 compared with the same period in fiscal 2006.
The ASC Group’s backlog at March 31, 2007 was not material.
Corporate Unallocated Expenses
Corporate unallocated expenses, consisting of corporate salaries and benefits, legal and professional and other corporate expenses, decreased $0.1 million to $0.6 million in the first six months of fiscal 2007 compared with $0.7 million in the first six months of fiscal 2006. The decrease is attributable to a net reduction in compensation expenses due to a management restructuring after the sale of the large aerospace portion of the Repair Group’s business that occurred in fiscal 2006. This decrease was partially offset by (i) an increase in incentive expense related to projected payments earned as a result the Company’s improved operating results in fiscal 2007 and (ii) legal and professional expenses related to the pending sale of the Company’s industrial turbine engine component repair business.
Other/General
Interest expense was nominal in the first six months of both fiscal 2007 and 2006. The following table sets forth the weighted average interest rates and weighted average outstanding balances under the Company’s credit agreements in the first six months of fiscal years 2007 and 2006.
                 
  Weighted Average Weighted Average
  Interest Rate Outstanding Balance
  Six Months Ended Six Months Ended
  March 31, March 31,
Credit Agreement 2007 2006 2007 2006
Revolving credit agreement  8.8%  8.0% $0.8 million $0.5 million
Debt purchase agreement (1)  N/A   4.3%  N/A  $1.1 million
(1)Debt purchase agreement was paid off during the third quarter of fiscal 2006.
The Company did not recognize a U.S. income tax provision in the first six months of fiscal 2007, other than a provision for alternative minimum tax, because the Company anticipates that any taxable income generated in fiscal 2007 will be offset for U.S. income tax purposes by the Company’s U.S tax loss carry forwards.
Three Months Ended March 31, 2007 Compared with Three Months Ended March 31, 2006
Net sales from continuing operations in the second quarter of fiscal 2007 increased 16.0% to $21.5 million, compared with $18.6 million in the comparable period in fiscal 2006. Income from continuing operations in the second quarter of fiscal 2007 was $3.1 million, compared with $1.1 million in the comparable period in fiscal 2006. Loss from discontinued operations, net of tax, which includes both the industrial turbine engine component repair business that is under an agreement to be sold and the large aerospace portion of SIFCO’s turbine engine component repair business that was sold in the third quarter of fiscal 2006, was $1.0 million in the second quarter of fiscal 2007 and $1.7 million in the comparable period in fiscal 2006. Net income in the second quarter of fiscal 2007 was $2.0 million, compared with a net loss of $0.6 million in the comparable period in fiscal 2006.

11


Aerospace Component Manufacturing Group (“ACM Group”)
Net sales in the second quarter of fiscal 2007 increased 21.7% to $14.5 million, compared with $12.0 million in the comparable period of fiscal 2006. For purposes of the following discussion, the ACM Group considers aircraft that can accommodate less than 100 passengers to be small aircraft and those that can accommodate 100 or more passengers to be large aircraft. Net sales of airframe components for small aircraft increased $0.5 million to $7.5 million in the second quarter of fiscal 2007, compared with $7.0 million in the comparable period in fiscal 2006. Net sales of turbine engine components for small aircraft, which consist primarily of net sales of turbine engine components for business and regional jets, as well as military transport and surveillance aircraft, increased $1.5 million to $4.1 million in the second quarter of fiscal 2007, compared with $2.6 million in the comparable period in fiscal 2006. Net sales of airframe components for large aircraft increased $0.8 million to $1.8 million in the second quarter of fiscal 2007, compared with $1.0 million in the comparable period in fiscal 2006. Net sales of turbine engine components for large aircraft increased $0.1 million to $0.4 million in the second quarter of fiscal 2007, compared with $0.3 million in the comparable period in fiscal 2006. Commercial product and non-product sales were $0.7 million and $1.1 million in the second quarters of fiscal 2007 and 2006, respectively.
The ACM Group’s airframe and turbine engine component products have both military and commercial applications. Net sales of airframe and turbine engine components that solely have military applications were $6.0 million in the second quarter of fiscal 2007, compared with $5.7 million in the comparable period in fiscal 2006.
The ACM Group’s selling, general and administrative expenses were $0.9 million in both the second quarters of fiscal 2007 and 2006, or 6.5% and 7.7% of net sales, respectively. During the second quarter of fiscal 2007, increases in compensation expense, including incentive compensation, and variable selling costs due to the overall increase in net sales and operating income during the second quarter of fiscal 2007 were offset by lower expenditures for consulting and professional services, as well as a lower provision for bad debts, compared with the second quarter of fiscal 2006.
The ACM Group’s operating income in the second quarter of fiscal 2007 was $2.9 million, compared with $1.0 million in the same period in fiscal 2006. Operating results were positively impacted in the second quarter of fiscal 2007, compared with the same period in fiscal 2006, due to the positive impact on margins resulting from significantly higher production and sales volumes in the second quarter of fiscal 2007. The improved margins are due principally to (i) the absorption of the ACM Group’s relatively high fixed operating costs over more units of production and sales and (ii) a $0.5 million reduction in the LIFO provision in the second quarter of fiscal 2007 compared to the same period in fiscal 2006.
Turbine Component Services and Repair Group (“Repair Group”)
Net sales from continuing operations in the second quarter of fiscal 2007, which consists principally of component repair services (including precision component machining and industrial coating) for small aerospace turbine engines, decreased 6.4% to $3.1 million, compared with $3.3 million in the comparable fiscal 2006 period.
During the second quarter of fiscal 2007, the Repair Group’s selling, general and administrative expenses from continuing operations were $0.3 million, or 8.3% of net sales, compared with $0.4 million, or 10.8% of net sales, in the comparable fiscal 2006 period.
The Repair Group’s operating income from continuing operations in the second quarter of fiscal 2007 was $0.1 million, compared with $0.2 million in the comparable fiscal 2006 period.
Applied Surface Concepts Group (“ASC Group”)
Net sales of the ASC Group increased 17.5% to $3.9 million in the second quarter of fiscal 2007, compared with net sales of $3.3 million in the comparable period of fiscal 2006. In the second quarter of fiscal 2007, product net sales, consisting of selective electrochemical finishing equipment and solutions, increased 7.9%19.5% to $1.6$2.0 million, compared with $1.5$1.7 million in the same period in fiscal 2006. In the firstsecond quarter of fiscal 2007, customized selective electrochemical finishing contract service net sales increased 52.0%18.7% to $1.8$1.9 million, compared with $1.2$1.6 million in the same period in fiscal 2006. The increase in net sales in the first quarter of fiscal 2007, compared to the same period in fiscal 2006, is primarily attributable to an increase in net sales to the exploration and production sectors of the oil and gas industry.
During the firstsecond quarter of fiscal 2007, The ASC Group’s selling, general and administrative expenses decreased $0.1 million to $1.0remained flat at $1.1 million, or 30.7%29.4% of net sales, compared with $1.1 million, or 40.5%35.2% of net sales in the firstsecond quarter of fiscal 2006.
The ASC Group’s operating income in the firstsecond quarter of fiscal 2007 was $0.4 million, compared with an operating loss of $0.1 million in the same period in fiscal 2006. Operating results improved principally due to the positive impact on margins of the significantly higher net sales volumes in the firstsecond quarter of fiscal 2007 compared with the same period in fiscal 2006.

12


The Applied Surface Concepts Group backlog at December 31, 2006 was not material.
Corporate Unallocated Expenses
Corporate unallocated expenses, consisting of corporate salaries and benefits, legal and professional and other corporate expenses, decreased $0.2increased $0.1 million to $0.3 million in the firstsecond quarter of fiscal 2007, compared with $0.5$0.2 million in the firstsecond quarter of fiscal 2006. The decreaseincrease is principally attributable to (i) a reduction in legal and professional expenses that were incurred in the first quarter of fiscal 2006 related to the pending sale of the large aerospace portion of the Repair Group’s business and (ii) a reduction in compensation expenses due in part to the management restructuring after the aforementioned sale.Company’s industrial turbine engine component repair business.
Other/General
Interest expense was nominal in the firstsecond quarters of both fiscal 2007 and 2006. The following table sets forth the weighted average interest rates and weighted average outstanding balances under the Company’s credit agreements in the firstsecond quarter of fiscal years 2007 and 2006.

10


                                
 Weighted Average Weighted Average  Weighted Average Weighted Average
 Interest Rate Outstanding Balance  Interest Rate Outstanding Balance
 Three Months Ended Three Months Ended  Three Months Ended Three Months Ended
 December 31, December 31,  March 31, March 31,
Credit Agreement 2006 2005 2006 2005  2007 2006 2007 2006
Revolving credit agreement  8.8%  7.8% $0.4 million $0.1 million  8.8%  8.0% $0.4 million $1.0 million
Debt purchase agreement (1) N/A  4.2% N/A $1.3 million N/A  4.4% N/A 0.9 million
 
(1) The debt purchase agreement was paid off during the third quarter of fiscal 2006.
Currency exchange loss was $0.2 millionThe Company did not recognize a U.S. income tax provision in the firstsecond quarter of fiscal 2007, compared toother than a nominal amount inprovision for alternative minimum tax, because the same periodCompany anticipates that any taxable income generated in fiscal 2006. These losses are the result of the impact of currency exchange rate fluctuations on2007 will be offset for U.S. income tax purposes by the Company’s non-U.S. subsidiaries’ monetary assets and liabilities that are not denominated in such subsidiaries’ local currency. During the first quarter of fiscal 2007, the euro strengthened in relation to the U.S. dollar, while the euro was stable in the first quarter of fiscal 2006.
Other income in the first quarter of fiscal 2007 includes $2.1 million of grant income, as described more fully in Note 7 to the Unaudited Consolidated Condensed Financial Statements.U.S tax loss carry forwards.
B. Liquidity and Capital Resources
Cash and cash equivalents decreased to $3.8$3.9 million at DecemberMarch 31, 20062007 from $4.7 million at September 30, 2006. At present, essentially all of the Company’s cash and cash equivalents are in the possession of its non-U.S. subsidiaries. Distributions from the Company’s non-U.S. subsidiaries to the Company may be subject to statutory restriction, adverse tax consequences or other limitations.
The Company’s operating activities consumed $0.8$2.3 million of cash (of which $1.4 million was from continuing operations) in the first threesix months of fiscal 2007, compared with $0.9essentially breakeven operating activities from a cash perspective (of which $1.2 million of cash providedwas consumed by continuing operations) in the first threesix months of fiscal 2006. The $0.8$1.4 million of cash used for operating activities from continuing operations in first threesix months of fiscal 2007 was primarily due to (i) operating income from continuing operations, before depreciation expense, of $0.9$4.9 million and a $1.2 million increase in accounts payable; offset by (ii) a $0.4$3.0 million decreaseincrease in accounts receivable; offset by (iii)receivable and a $1.5$4.6 million increase in inventory principally attributable to the ACM Groups’sGroup’s response to the increased demand in its business, (iv) a $0.4 million decrease in accounts payable and accrued liabilities, and (v) a $2.2 million decrease is other long-term liabilities resulting in the recognition of $2.1 million of non-cash grant income.business. The other changes in these components of working capital were due to factors resulting from normal business conditions of the Company, including (i) sales levels, (ii) collections from customers, (iii) the relative timing of payments to suppliers, and (iv) inventory levels required to support customer demand in general and, in particular, the significant extension of raw material lead times currently experienced by the ACM Group.
Capital expenditures were $0.5$0.9 million (essentially all was from continuing operations) in the first threesix months of fiscal 2007 compared to $0.2$0.6 million (of which $0.5 million was from continuing operations) in the comparable fiscal 2006 period. Fiscal 2007 capital expenditures from continuing operations consist of $0.1$0.2 million by the ACM Group, $0.1$0.2 million by the ASC Group and $0.4$0.5 million by the Repair Group. The Company anticipates that total fiscal 2007 capital expenditures will approximate $2.0 million.
At DecemberMarch 31, 2006,2007, the Company has a $6.0 million revolving credit agreement with a bank, subject to sufficiency of collateral, which expires on April 1, 2008 and bears interest at the bank’s base rate plus 0.50%. The interest rate was 8.75% at DecemberMarch 31, 2006.2007. A 0.375% commitment fee is incurred on the unused balance of the revolving credit agreement. At DecemberMarch 31, 2006, $0.52007, $2.1 million was outstanding and the Company had $5.4$3.8 million available under its $6.0 million revolving credit agreement. The Company’s revolving credit agreement is secured by substantially all of the Company’s assets located in the U.S., a guarantee by its U.S. subsidiaries and a pledge of 65% of the Company’s ownership interest in its non-U.S. subsidiaries.

13


Under its revolving credit agreement with the U.S. bank, the Company is subject to certain customary covenants. These include, without limitation, covenants (as defined) that require maintenance of certain specified financial ratios, including a minimum tangible net worth level and a minimum EBITDA level. The Company was in compliance with all applicable covenants at DecemberMarch 31, 2006.2007. In May 2007, the Company entered into an agreement with its bank to amend certain provisions of its revolving credit agreement. The amendment extended the maturity date of the revolving credit agreement to October 1, 2008.
The Company believes that cash flows from its operations together with existing cash reserves and the funds available under its revolving credit agreement will be sufficient to meet its working capital requirements through the end of fiscal year 2007. However, no assurances can be given as to the sufficiency of the Company’s working capital to support the Company’s operations. If the existing cash reserves, cash flow from operations and funds available under the revolving credit agreement

11


are insufficient; if working capital requirements are greater than currently estimated; and/or if the Company is unable to satisfy the covenants set forth in its credit agreement, the Company may be required to adopt one or more alternatives, such as reducing or delaying capital expenditures, restructuring indebtedness, selling assets or operations, or issuing additional shares of capital stock in the Company. There can be no assurance that any of these actions could be accomplished, or if so, on terms favorable to the Company, or that they would enable the Company to continue to satisfy its working capital requirements.
Item 3. Quantitative and Qualitative Disclosures Aboutabout Market Risk
In the ordinary course of business, the Company is subject to foreign currency and interest risk. The risks primarily relate to the sale of the Company’s products and services in transactions denominated in non-U.S. dollar currencies (primarily the euro);currencies; the payment in local currency of wages and other costs related to the Company’s non-U.S. operations; and changes in interest rates on the Company’s long-term debt obligations. The Company does not hold or issue financial instruments for trading purposes.
The Company believes that inflation has not materially affected its results of operations during the first threesix months of fiscal 2007, and does not expect inflation to be a significant factor in the balance of fiscal 2007.
A. Foreign Currency Risk
The U.S. dollar is the functional currency for all of the Company’s U.S. operations. For these operations, all gains and losses from completed currency transactions are included in income currently. As a result of the sale in fiscal 2006 of the large aerospace portion of the Company’s Irish subsidiary’s turbine engine component services and repair business, the majority of the Irish subsidiary’s transactions are now denominated in euros and, therefore, the functional currency of the Irish subsidiary’s remaining business was changed to the euro from the U.S. dollar. Prior to the sale of the large aerospace portion of the Irish subsidiary’s turbine engine component services and repair business, a substantial majority of the Irish subsidiary’s transactions were denominated in U.S. dollars and, therefore, its functional currency prior to October 1, 2006 was the U.S. dollar. As explained more fully in Note 8 to the Unaudited Consolidated Condensed Financial Statements, in May 2007 the Company entered into an agreement to sell it remaining business in Ireland and certain related assets. For the Company’s other non-U.S. subsidiaries, the functional currency is the local currency. Assets and liabilities are translated into U.S. dollars at the rate of exchange at the end of the period and revenues and expenses are translated using average rates of exchange. Foreign currency translation adjustments are reported as a component of accumulated other comprehensive income (loss).
Historically, the Company has been able to mitigate the impact of foreign currency risk by means of hedging such risk through the use of foreign currency exchange contracts, which typically expire within one year. However, such risk is mitigated only for the periods for which the Company has foreign currency exchange contracts in effect, and only to the extent of the U.S. dollar amounts of such contracts. At DecemberMarch 31, 2006,2007, the Company had no forward exchange contracts outstanding. The Company will continue to evaluate its foreign currency risk, if any, and the effectiveness of using similar hedges in the future to mitigate such risk.
At DecemberMarch 31, 2006,2007, the Company’s assets and liabilities denominated in the British Pound, the Euro, and the Swedish Krona were as follows (amounts in thousands):
                        
 British Pound Euro Swedish Krona British Pound Euro Swedish Krona
Cash and cash equivalents 231 100 2  75 58 275 
Accounts receivable 396 840 1,326  146 464 1,580 
Accounts payable and accrued liabilities 185 907 1,462  199 1,121 2,510 

14


B. Interest Rate Risk
The Company’s primary interest rate risk exposure results from the variable interest rate mechanisms associated with the Company’s revolving credit agreement. If interest rates were to increase 100 basis points (1%) from DecemberMarch 31, 2006,2007, and assuming no changes in the amount outstanding under the revolving credit agreement, the additional interest expense to the Company would be nominal.

12


Item 4. Controls and Procedures
The Company maintains disclosure controls and procedures as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”) that are designed to ensure that information required to be disclosed in its reports filed or submitted under the Exchange Act is processed, recorded, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to the Company’s management, including the Company’s Chief Executive Officer and Chief Financial Officer, as appropriate, to allow for timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.
The Company carried out an evaluation, under the supervision and with the participation of the Company’s management, including the Chairman and Chief Executive Officer of the Company and Chief Financial Officer of the Company, of the effectiveness of the design and operation of the Company’s disclosure controls and procedures pursuant to Exchange Act Rule 13a-15(e) as of the end of the period covered by this report. Based upon that evaluation, the Chairman and Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures are effective in timely alerting them to material information relating to the Company (including its consolidated subsidiaries) required to be included in the Company’s periodic SEC filings, and management has concluded that the unaudited consolidated condensed financial statements included in this Form 10-Q fairly present, in all material respects, the Company’s financial position, results of operations and cash flows for the periods presented.
There has been no significant change in our internal control over financial reporting that occurred during the period covered by this report that has materially affected, or that is reasonably likely to materially affect our internal control over financial reporting.
Part II.Other Information
Item 1. Legal Proceedings
No change.
Item 2. Change in Securities and Use of Proceeds
No change.
Item 3. Defaults upon Senior Securities
None.

15


Item 4. Submission of Matters to a Vote of Security Holders
NoneAt the Annual Meeting of Shareholders held on January 30, 2007 there were a total of 4,873,139 shareholders voting either in person or by proxy. The shareholders:
A.Elected six directors to the Company’s Board of Directors, Jeffrey P. Gotschall, P. Charles Miller, Jr., Frank N. Nichols, Alayne L. Reitman, Hudson D. Smith and J. Douglas Whelan, to serve on the Board of Directors until the Company’s Annual Meeting in 2008.
The results of the voting for directors were as follows:
         
Name Votes For Votes Withheld
Jeffrey P. Gotschall  4,193,585   679,554 
P. Charles Miller, Jr.  4,155,791   717,348 
Frank N. Nichols  4,231,276   641,863 
Alayne L. Reitman  4,155,791   717,348 
Hudson D. Smith  4,234,139   638,884 
J. Douglas Whelan  4,152,220   720,919 
B.Ratified Grant Thornton LLP as the independent auditors of the Company to audit the books and accounts of the Company for the fiscal year ending September 30, 2007. There were 4,234,139 votes cast for the appointment, 613,536 votes cast against the appointment and 25,464 abstentions.
Item 5. Other Information
None.
Item 6. Exhibits
(a)     (a) Exhibits
The following exhibits are filed with this report or are incorporated herby reference to a prior filing in accordance with Rule 12b-32 under the Securities and Exchange Act of 1934 (Asterisk denotes exhibits filed with this report.).

13


   
Exhibit
No. Description
3.1 Third Amended Articles of Incorporation of SIFCO Industries, Inc., filed as Exhibit 3(a) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
   
3.2 SIFCO Industries, Inc. Amended and Restated Code of Regulations dated January 29, 2002, filed as Exhibit 3(b) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
   
4.2 Amended and Restated Credit Agreement Between SIFCO Industries, Inc. and National City Bank dated April 30, 2002, filed as Exhibit 4(b) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
   
4.5 Consolidated Amendment No. 1 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated November 26, 2002 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.5 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
   
4.6 Consolidated Amendment No. 2 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated February 13, 2003 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.6 of the Company’s Form 10-Q dated December 31, 2002, and incorporated herein by reference
   
4.7 Consolidated Amendment No. 3 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated May 13, 2003 between SIFCO Industries Inc. and National City Bank, filed as Exhibit 4.7 of the Company’s Form 10-Q dated March 31, 2003, and incorporated herein by reference

16


   
Exhibit
No.Description
4.8 Consolidated Amendment No. 4 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated July 28, 2003 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.8 of the Company’s Form 10-Q dated June 30, 2003, and incorporated herein by reference
   
4.9 Consolidated Amendment No. 5 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated November 26, 2003 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.9 to the Company’s Form 10-K dated September 30, 2004 and incorporated herein by reference
   
4.10 Amendment No. 6 to Amended and Restated Credit Agreement dated March 31, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.10 of the Company’s Form 10-Q dated March 31, 2004, and incorporated herein by reference
   
4.11 Consolidated Amendment No. 7 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated May 14, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.11 of the Company’s Form 10-Q dated March 31, 2004, and incorporated herein by reference
   
4.12 Consolidated Amendment No. 8 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note effective June 30, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.12 of the Company’s Form 10-Q dated June 30, 2004, and incorporated herein by reference
   
4.13 Consolidated Amendment No. 9 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note effective November 12, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.13 to the Company’s Form 10-K dated September 30, 2004 and incorporated herein by reference
   
4.14 Amendment No. 10 to Amended and Restated Credit Agreement effective December 31, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.14 to the Company’s Form 10-Q dated December 31, 2004, and incorporated herein by reference
   
4.15 Amendment No. 11 to Amended and Restated Credit Agreement dated May 19, 2005 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.15 to the Company’s Form 10-Q/A dated March 31, 2005, and incorporated herein by reference

14


   
Exhibit No.Description
4.16 Amendment No. 12 to Amended and Restated Credit Agreement dated August 10, 2005 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.16 to the Company’s Form 10-Q dated June 30, 2005, and incorporated herein by reference
   
4.17 Debt Purchase Agreement Between The Governor and Company of the Bank of Ireland and SIFCO Turbine Components Limited, filed as Exhibit 4.17 to the Company’s Form 8-K dated September 29, 2005, and incorporated herein by reference
   
4.18 Mortgage and Charge dated September 26, 2005 between SIFCO Turbine Components Limited and the Governor and Company of the Bank of Ireland, filed as Exhibit 4.18 to the Company’s Form 8-K dated September 29, 2005, and incorporated herein by reference
   
4.19 Amendment No. 13 to Amended and Restated Credit Agreement dated November 23, 2005 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.19 to the Company’s Form 10-K dated September 30, 2005, and incorporated herein by reference
   
4.20 Amendment No. 14 to Amended and Restated Credit Agreement dated February 10, 2006 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.20 to the Company’s Form 10-Q dated December 31, 2005, and incorporated herein by reference
   
4.21 Amendment No. 15 to Amended and Restated Credit Agreement dated August 14, 2006 between SIFCO Industries, Inc. and National City Bank, filed as exhibit 4.21 to the Company’s Form 10-Q dated June 30, 2006 and incorporated herein by reference

17


   
Exhibit
No.Description
4.22 Amendment No. 16 to Amended and Restated Credit Agreement dated November 29, 2006 between SIFCO Industries, Inc. and National City Bank, filed as exhibit 4.22 to the Company’s Form 10-K dated September 30, 2006 and incorporated herein by reference
   
* 4.23 Amendment No. 17 to Amended and Restated Credit Agreement dated February 5, 2007 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.23 to the Company’s Form 10-Q dated December 31, 2006 and incorporated herein by reference
* 4.24Amendment No. 18 to Amended and Restated Credit Agreement dated May 10, 2007 between SIFCO Industries, Inc. and National City Bank
   
9.1 Voting Trust Extension Agreement dated January 14, 2002, filed as Exhibit 9.1 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
   
9.2 Voting Trust Agreement dated January 15, 1997, filed as Exhibit 9.2 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
   
* 9.3 Voting Trust Agreement dated January 30, 2007, filed as Exhibit 9.3 of the Company’s Form 10-Q dated December 31, 2006, and incorporated herein by reference
   
10.2 Deferred Compensation Program for Directors and Executive Officers (as amended and restated April 26, 1984), filed as Exhibit 10(b) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
   
10.3 SIFCO Industries, Inc. 1998 Long-term Incentive Plan, filed as Exhibit 10.3 of the Company’s form 10-Q dated June 30, 2004, and incorporated herein by reference
   
10.4 SIFCO Industries, Inc. 1995 Stock Option Plan, filed as Exhibit 10(d) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
   
10.5 Change in Control Severance Agreement between the Company and Frank Cappello, dated September 28, 2000, filed as Exhibit 10(g) of the Company’s Form 10-Q dated December 31, 2000, and incorporated herein by reference
   
10.7 Change in Control Severance Agreement between the Company and Remigijus Belzinskas, dated September 28, 2000, filed as Exhibit 10 (i) of the Company’s Form 10-Q dated December 31, 2000, and incorporated herein by reference

15


Exhibit No.Description
10.9Change in Control Severance Agreement between the Company and Timothy V. Crean, dated July 30, 2002, filed as Exhibit 10.9 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
   
10.10 Change in Control Severance Agreement between the Company and Jeffrey P. Gotschall, dated July 30, 2002, filed as Exhibit 10.10 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
   
10.11 Form of Restricted Stock Agreement, filed as Exhibit 10.11 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
   
10.12 Form of Tender, Condition of Tender, Condition of Sale and General Conditions of Sale dated June 30, 2004, filed as Exhibit 10.12 of the Company’s Form 8-K dated October 14, 2004, and incorporated herein by reference
   
10.13 Separation Agreement and Release between Hudson D. Smith and SIFCO Industries, Inc., effective January 31, 2005, filed as Exhibit 10.13 of the Company’s Form 8-K dated February 8, 2005, and incorporated herein by reference
   
10.14 Separation Pay Agreement between Frank A. Cappello and SIFCO Industries, Inc. dated December 16, 2005, filed as Exhibit 10.14 of the Company’s Form 10-K dated September 30, 2005, and incorporated herein by reference

18


   
Exhibit
No.Description
10.15 Agreement for the Purchase of the Assets of the Large Aerospace Business of SIFCO Turbine Components Limited dated March 16, 2006 between SIFCO Turbine Components Limited, SIFCO Industries, Inc, and SR Technics Airfoil Services Limited, as amended on April 19, 2006, May 2, 2006, May 5, 2006, May 9, 2006, and May 10, 2006, filed as exhibitsExhibit 10.15 of the Company’s Form 10-Q dated March 31, 2006 and incorporated herein by reference
   
10.16 Separation Agreement and Release Without Prejudice between the Company and Timothy V. Crean, dated November 28, 2006 filed as Exhibit 99.1 of the Company’s Form 8-K dated November 30, 2006, and incorporated herein by reference
   
*10.17 Amendment No. 1 to Change in Control Severance Agreement between the Company and Frank Cappello, dated February 5, 2007, filed as Exhibit 10.17 of the Company’s Form 10-Q dated December 31, 2006 and incorporated herein by reference
   
*10.18 Amendment No. 1 to Change in Control Severance Agreement between the Company and Remigijus Belzinskas, dated February 5, 2007, filed as Exhibit 10.18 of the Company’s Form 10-Q dated December 31, 2006 and incorporated herein by reference
   
14.1 Code of Ethics, files as Exhibit 14.1 of the Company’s Form 10-K dated September 30, 2003, and incorporated herein by reference
   
*31.1 Certification of Chief Executive Officer pursuant to Rule 13a-14(a) / 15d-14(a)
   
*31.2 Certification of Chief Financial Officer pursuant to Rule 13a-14(a) / 15d-14(a)
   
*32.1 Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350
   
*32.2 Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350

1619


SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereto duly authorized.
   
  SIFCO Industries, Inc.
(Registrant)
  
Date: February 7, 2007/s/ Jeffrey P. Gotschall
(Registrant)  
   
Date: May 11, 2007/s/ Jeffrey P. Gotschall
     Jeffrey P. Gotschall
       Chairman of the Board and
       Chief Executive Officer
Date: February 7, 2007/s/ Frank A. Cappello
  
   
Date: May 11, 2007/s/ Frank A. Cappello
     Frank A. Cappello
       Vice President-Finance and
       Chief Financial Officer
       (Principal Financial Officer)

1720