☒ Quarterly report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

☐ Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

(Former name, former address and former fiscal year, if changed since last report)

Securities registered pursuant to Section 12(b) of the ~~Securities Exchange Act of 1934:~~Act:

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act) Yes ☐ No ☒

As of ~~October 31, 2022,~~April 30, 2023, there were ~~11,023,304~~11,102,611 shares of the registrant’s Common Stock outstanding.

This Quarterly Report on Form 10-Q (the “Quarterly Report”) contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. We intend such forward-looking statements to be covered by the safe harbor provisions for forward-looking statements contained in Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). All statements other than statements of historical facts contained in this Quarterly Report, including without limitation statements regarding our business model and strategic plans for our products, technologies and business, including our implementation thereof; the impact on our business, financial condition and results of operation from the ~~ongoing and~~ global COVID-19 ~~pandemic;~~pandemic and related macroeconomic conditions; the timing of and our ability to obtain and maintain regulatory ~~approvals;~~approvals and certifications; our expectations about our ability to successfully develop and commercialize our next generation system, the ~~ALLY™~~ALLY® Adaptive Cataract Treatment System (“ALLY System”), and the timing thereof; the sufficiency of our cash and cash equivalents; and the plans and objectives of management for future operations and capital expenditures are forward-looking statements. These statements involve known and unknown risks, uncertainties and other important factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements.

Without limiting the foregoing, in some cases, you can identify forward-looking statements by terms such as “aim”, “may,” “will,” “should,” “expect,” “exploring,” “plan,” “anticipate,” “could,” “intend,” “target,” “project,” “contemplate,” “believe,” “estimate,” “predict,” “potential,” “seeks,” or “continue” or the negative of these terms or other similar expressions, although not all forward-looking statements contain these words. No forward-looking statement is a guarantee of future results, performance, or achievements, and one should avoid placing undue reliance on such statements.

Forward-looking statements are based on our management’s beliefs and assumptions and on information currently available to us. Such beliefs and assumptions may or may not prove to be correct. Additionally, such forward-looking statements are subject to a number of known and unknown risks, uncertainties and assumptions, and actual results may differ materially from those expressed or implied in the forward-looking statements due to various factors, including, but not limited to, those identified in Part I. Item 2. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and Part II. Item 1A. “Risk Factors” in this Quarterly Report. These risks and uncertainties include, but are not limited to:

Moreover, we operate in an evolving environment. New risk factors and uncertainties may emerge from time to time, and it is not possible for management to predict all risk factors and uncertainties.

You should read this Quarterly Report and the documents that we reference in this Quarterly Report completely and with the understanding that our actual future results may be materially different from what we expect. We qualify all of our forward-looking statements by these cautionary statements. Except as required by applicable law, we have no obligation to publicly update or revise any forward-looking statements contained herein, whether as a result of any new information, future events, changed circumstances or otherwise.

Unless otherwise stated or the context requires otherwise, references to “LENSAR,” the “Company,” “we,” “us,” and “our,” refer to LENSAR, Inc.

We own or have rights to certain trademarks, trade names, copyrights and other intellectual property used in our business, including LENSAR, the LENSAR logo, LENSAR Cataract Laser with Augmented Reality logo, Streamline, IntelliAxis, IntelliAxis Refractive Capsulorhexis, and ALLY Adaptive Cataract Treatment System, each of which is considered a trademark. All other company names, product names, trade names and trademarks included in this Quarterly Report are trademarks, registered trademarks or trade names of their respective owners.

Our business is subject to numerous risks and uncertainties, including those described in Part II, Item 1A. “Risk Factors” in this Quarterly Report. You should carefully consider these risks and uncertainties when investing in our common stock. The principal risks and uncertainties affecting our business include the following:


	Three Months Ended September 30,						Nine Months Ended September 30,						Three Months Ended March 31,
	2022			2021			2022			2021			2023			2022
Revenue
Product	$	5,486		$	6,084		$	18,188		$	17,298		$	5,658		$	6,969
Lease		1,472			1,285			4,286			3,536			1,629			1,399
Service		790			903			2,652			2,403			965			972
Total revenue		7,748			8,272			25,126			23,237			8,252			9,340
Cost of revenue (exclusive of amortization)
Product		2,189			2,915			6,648			7,371			2,299			2,694
Lease		488			448			1,446			967			494			474
Service		1,182			1,058			3,559			2,696			1,139			1,480
Total cost of revenue		3,859			4,421			11,653			11,034			3,932			4,648
Operating expenses
Selling, general and administrative expenses		6,119			6,523			19,966			18,076			6,755			6,278
Research and development expenses		1,577			3,184			10,199			8,936			1,650			4,788
Amortization of intangible assets		276			309			872			931			276			309
Operating loss		(4,083	)		(6,165	)		(17,564	)		(15,740	)		(4,361	)		(6,683	)
Other income
Other income, net		92			10			140			41			89			9
Net loss	$	(3,991	)	$	(6,155	)	$	(17,424	)	$	(15,699	)	$	(4,272	)	$	(6,674	)
Net loss per share:
Basic and diluted	$	(0.39	)	$	(0.65	)	$	(1.73	)	$	(1.69	)	$	(0.40	)	$	(0.67	)
Weighted-average number of shares used in calculation of net loss per share:
Basic and diluted		10,225			9,439			10,089			9,308			10,716			9,967

The accompanying notes are an integral part of these condensed financial statements


	September 30, 2022			December 31, 2021			March 31, 2023			December 31, 2022
Assets
Current assets:
Cash and cash equivalents	$	19,293		$	31,637		$	7,970		$	14,674
Accounts receivable, net of allowance of $31 and $47, respectively		3,560			4,638
Notes receivable, net of allowance of $3 and $61, respectively		126			350
Accounts receivable, net of allowance of $43 and $56, respectively								4,660			6,040
Notes receivable, net of allowance of $4 and $4, respectively								203			200
Inventories		7,890			6,488			15,668			11,740
Prepaid and other current assets		1,302			1,700			1,474			1,062
Total current assets		32,171			44,813			29,975			33,716
Property and equipment, net		639			756			520			563
Equipment under lease, net		6,732			6,690			6,248			6,316
Notes and other receivables, long-term, net of allowance of $0 and $2, respectively		—			121
Notes and other receivables, long-term, net of allowance of $16 and $9, respectively								768			442
Intangible assets, net		12,398			10,870			11,845			12,122
Other assets		2,861			3,215			2,605			2,685
Total assets	$	54,801		$	66,465		$	51,961		$	55,844
Liabilities and stockholders’ equity
Current liabilities:
Accounts payable	$	3,506		$	2,694		$	4,923		$	5,422
Accrued liabilities		4,948			4,604			3,493			4,700
Deferred revenue		789			904			1,032			768
Operating lease liabilities		526			512			544			531
Other current liabilities		19			—
Total current liabilities		9,788			8,714			9,992			11,421
Long-term operating lease liabilities		2,408			2,803			2,171			2,272
Other long-term liabilities		22			69			360			167
Total liabilities		12,218			11,586			12,523			13,860
Commitments and contingencies (Note 8)
Stockholders’ equity:
Preferred stock, par value $0.01 per share, 10,000 shares authorized at September 30, 2022 and December 31, 2021; no shares issued and outstanding at September 30, 2022 and December 31, 2021		—			—
Common stock, par value $0.01 per share, 150,000 shares authorized at September 30, 2022 and December 31, 2021; 11,023 and 10,990 shares issued and outstanding at September 30, 2022 and December 31, 2021, respectively		110			110
Preferred stock, par value $0.01 per share, 10,000 shares authorized at March 31, 2023 and December 31, 2022; no shares issued and outstanding at March 31, 2023 and December 31, 2022								—			—
Common stock, par value $0.01 per share, 150,000 shares authorized at March 31, 2023 and December 31, 2022; 11,103 and 11,093 shares issued and outstanding at March 31, 2023 and December 31, 2022, respectively								111			111
Additional paid-in capital		137,491			132,363			141,107			139,381
Accumulated deficit		(95,018	)		(77,594	)		(101,780	)		(97,508	)
Total stockholders’ equity		42,583			54,879			39,438			41,984
Total liabilities and stockholders’ equity	$	54,801		$	66,465		$	51,961		$	55,844

The accompanying notes are an integral part of these condensed financial statements


	Nine Months Ended						Three Months Ended
	September 30,						March 31,
	2022			2021			2023			2022
Cash flows from operating activities
Net loss	$	(17,424	)	$	(15,699	)	$	(4,272	)	$	(6,674	)
Adjustments to reconcile net loss to net cash used in operating activities:
Depreciation		1,681			1,063			578			541
Amortization of intangible assets		872			931			276			309
Non-cash operating lease cost		391			388			133			130
Provision for expected credit losses		—			3			(6	)		134
Write-down of inventory		173			307
Loss on disposal of property and equipment		11			133
Stock-based compensation expense		4,916			5,323			1,726			1,607
Changes in operating assets and liabilities:
Accounts receivable		1,065			(794	)		1,393			1,037
Prepaid and other current assets		398			856			(427	)		192
Inventories		(3,105	)		(271	)		(4,381	)		1,116
Accounts payable		783			(103	)		(499	)		158
Accrued liabilities		362			(324	)		(1,197	)		(1,198	)
Other		(221	)		(43	)		(20	)		41
Net cash used in operating activities		(10,098	)		(8,230	)		(6,696	)		(2,607	)
Cash flows from investing activities
Purchase of property and equipment		(58	)		(198	)		(8	)		(46	)
Net cash used in investing activities		(58	)		(198	)		(8	)		(46	)
Cash flows from financing activities
Payment of contingent consideration		(2,400	)		—
Proceeds from issuance of common stock under employee stock purchase plan		212			170
Net cash (used in) provided by financing activities		(2,188	)		170
Net decrease in cash and cash equivalents		(12,344	)		(8,258	)		(6,704	)		(2,653	)
Cash and cash equivalents at beginning of the period		31,637			40,599			14,674			31,637
Cash and cash equivalents at end of the period	$	19,293		$	32,341		$	7,970		$	28,984

The accompanying notes are an integral part of these condensed financial statements


	Common Stock					Additional Paid-in		Accumulated			Total Stockholders’			Common Stock					Additional Paid-in		Accumulated			Total Stockholders’
	Shares			Amount		Capital		Deficit			Equity			Shares			Amount		Capital		Deficit			Equity
Balance as of December 31, 2021		10,990		$	110	$	132,363	$	(77,594	)	$	54,879
Balance as of December 31, 2022															11,093		$	111	$	139,381	$	(97,508	)	$	41,984
Stock-based compensation		—			—		1,607		—			1,607			—			—		1,726		—			1,726
Common stock issued															15			—		—		—			—
Restricted stock awards cancelled		(5	)		—		—		—			—			(5	)		—		—		—			—
Net loss		—			—		—		(6,674	)		(6,674	)		—			—		—		(4,272	)		(4,272	)
Balance as of March 31, 2022		10,985		$	110	$	133,970	$	(84,268	)	$	49,812
Issuance of common stock under the 2020 ESPP		37			—		212		—			212
Restricted stock awards cancelled		(1	)		—		—		—			—
Stock-based compensation		—			—		1,637		—			1,637
Net loss		—			—		—		(6,759	)		(6,759	)
Balance as of June 30, 2022		11,021			110		135,819		(91,027	)		44,902
Issuance of common stock under ATM offering, net of offering costs		2			—		—		—			—
Stock-based compensation		—			—		1,672		—			1,672
Net loss		—			—		—		(3,991	)		(3,991	)
Balance as of September 30, 2022		11,023		$	110	$	137,491	$	(95,018	)	$	42,583
Balance as of March 31, 2023															11,103		$	111	$	141,107	$	(101,780	)	$	39,438


					Additional					Total								Additional					Total
	Common Stock				Paid-in		Accumulated			Stockholders’			Common Stock					Paid-in		Accumulated			Stockholders’
	Shares		Amount		Capital		Deficit			Equity			Shares			Amount		Capital		Deficit			Equity
Balance as of December 31, 2020		10,933	$	109	$	125,094	$	(57,993	)	$	67,210
Balance as of December 31, 2021														10,990		$	110	$	132,363	$	(77,594	)	$	54,879
Stock-based compensation		—		—		2,301		—			2,301			—			—		1,607		—			1,607
Restricted stock awards cancelled														(5	)		—		—		—			—
Net loss		—		—		—		(5,182	)		(5,182	)		—			—		—		(6,674	)		(6,674	)
Balance as of March 31, 2021		10,933		109		127,395		(63,175	)		64,329
Issuance of common stock under the 2020 ESPP		24		1		169		—			170
Stock-based compensation		—		—		1,491		—			1,491
Net loss		—		—		—		(4,362	)		(4,362	)
Balance as of June 30, 2021		10,957		110		129,055		(67,537	)		61,628
Stock-based compensation		—		—		1,573		—			1,573
Net loss		—		—		—		(6,155	)		(6,155	)
Balance as of September 30, 2021		10,957	$	110	$	130,628	$	(73,692	)	$	57,046
Balance as of March 31, 2022														10,985		$	110	$	133,970	$	(84,268	)	$	49,812

The accompanying notes are an integral part of these condensed financial statements

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

Note 1. Overview and Basis of Presentation

Overview and Organization

LENSAR, Inc. (“LENSAR” or the “Company”) is a global medical device business focused on the design, development and commercialization of advanced technology for the treatment of cataracts and management of astigmatism to achieve improved visual outcomes for patients. ~~LENSAR~~The Company is a public company whose stock is listed and trading under the symbol “LNSR” on The Nasdaq Stock Market LLC (“Nasdaq”). The Company’s revenue is derived from the sale and lease of ~~LENSAR’s~~the Company’s laser systems, which may include equipment, a consumable referred to as the Patient Interface Device (“PID”), procedure licenses, training, installation, limited warranty and maintenance agreements through extended warranty. ~~LENSAR~~The Company has developed its next-generation ~~ALLY™~~ALLY® Adaptive Cataract Treatment System (“ALLY System”), which combines all of the ~~first platform to integrate its proprietary imaging~~features from the LENSAR Laser System with a ~~dual-pulsed~~dual-pulse laser, integrated in a small, compact cataract treatment system that is designed to allow surgeons to perform a sterile femtosecond laser ~~and phacoemulsification technology~~assisted cataract procedure in a single ~~compact system.~~operating room or in-office surgical suite. The ALLY System, which has received clearance from the U.S. Food and Drug Administration (“FDA”), enables cataract surgeons to complete the femtosecond-laser-assisted cataract surgery (“FLACS”) procedure in a single, sterile environment. ~~This clearance is the first stage of a planned, two step commercial release strategy.~~ The Company ~~is coordinating~~executed a controlled and targeted initial launch of the ALLY System ~~throughout the remainder of~~beginning in August 2022. The ALLY System is ~~expected to be made widely~~now available to U.S. cataract surgeons and has also received regulatory clearance in ~~2023.~~India. In addition, we submitted the ALLY System for certification in the European Union, or EU, in September 2022 and intend to submit additional marketing or certification applications outside the United States in an effort to commercialize the ALLY System in additional countries and operating regions. The Company’s ability to place systems in 2022 ~~has been~~was limited by supply chain constraints that ~~have~~ delayed the delivery of certain ALLY System raw materials and the completion and testing of ALLY Systems for use as launch-stock inventory. As the second stage of the commercial release strategy, the Company plans to seek an additional 510(k) clearance for the phacoemulsification features of the ALLY System in a subsequent 510(k) submission subject to a third party’s phacoemulsification device receiving clearance and serving as the predicate device. LENSAR is unable to submit its second 510(k) submission seeking clearance of the phacoemulsification features within the ALLY System until the predicate device receives FDA clearance. Accordingly, the Company delivered the ALLY System to surgeons in the initial launch with the phacoemulsification features remaining disabled and/or removed and expects this to continue.

The Company has incurred recurring losses and operating cash outflows since its inception and, as of ~~September 30, 2022,~~March 31, 2023, had an accumulated deficit of $~~95,018~~101,780. The Company expects to continue to incur losses and cash outflows from operating activities for the ~~foreseeable~~near-term future. In addition, the Company’s results of operations, financial condition and cash flows have been adversely affected by the COVID-19 pandemic, including supply chain shortages, inflationary pressures and price ~~increases.~~increases that originated during the pandemic. The Company has experienced some supply chain disruptions and increased costs or unavailability of various component parts needed for the development and supply of the ALLY System ~~as a result of~~originally connected with the COVID-19 pandemic, including increasing lead times required for the ordering of component parts to meet targeted production goals and unpredictability with respect to the availability and delivery timing of these parts. The extent to which the COVID-19 outbreak, and current or future variants, will further negatively impact the Company’s business or operating results cannot be determined with certainty at this time. To date, the Company has maintained sufficient inventory to mitigate significant adverse impact from such disruptions and unavailability in the near-term and to facilitate the ~~initial~~ launch of the ALLY System; however, the Company is continuing to monitor developments with respect to such disruptions and their potential impact on the Company’s business, results of operations and financial condition.System. If ~~these~~ supply chain shortages and disruptions continue or worsen, or the Company is unable to find suitable alternative component parts, there is no guarantee the Company will be able to meet customer demand for the ALLY System following its ~~initial~~ launch. In addition, pricing increases in component parts for the ALLY System resulting from ~~the COVID-19 pandemic~~inflationary pressures and related ~~inflationary pressures~~macroeconomic conditions may necessitate an increase in overall cost to customers, which in turn may have an adverse impact on customer demand.

Management believes the Company’s cash and cash equivalents on hand, together with cash generated from the future sale and lease of products toand expected issuance and sale of preferred stock and warrants, will provide sufficient ~~liquidity to meet the Company’s projected obligations~~funds for its operating, investing, and financing cash flows for a period of at least twelve months from the date of issuance of these ~~condensed~~ financial ~~statements~~statements. Refer to Note 12, Subsequent Event, for further details related to the Company’s entrance into a Securities Purchase Agreement, dated as of May 12, 2023, providing for the sale of preferred stock and ~~into 2024.~~warrants to NR-GRI Partners, LP. With the commercial launch of the ALLY System, the Company expects annual revenue and selling, general and administrative expenses to increase from current levels. In addition, the successful commercialization of the ALLY System depends in part on the Company’s ability to produce the ALLY System in sufficient quantities, ~~and~~ within requested timelines and at an acceptable price to satisfy customer demand. The Company’s liquidity needs will be largely determined by the ~~success of its operations regarding the successful commercialization of~~Company’s ability to successfully commercialize its products and the progression, additional regulatory clearances or certifications and launch of the ALLY System in additional jurisdictions in the future. Such success will depend in part on the availability of the necessary component parts for the ALLY System. ~~The~~In the future, the Company ~~expects it will~~may need to raise additional capital through equity or debt financings, borrowings under credit facilities or from other sources ~~to continue its operations beyond 2024.~~in the future. The Company may issue securities, including common stock, preferred stock, warrants, and/or debt securities through private placement transactions or registered public offerings in the future. The Company’s ability to raise additional funds will depend, among other factors, on financial, economic and market conditions, many of which are outside of the Company’s control, and the Company may be unable to raise financing when needed, or on terms favorable to the Company. If the necessary funds are not available from these sources, the Company may have to delay, reduce or suspend the scope of its sales and marketing efforts, research and development activities, or other components of its operations.

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

Basis of Presentation

These condensed financial statements of the Company are unaudited and have been prepared in accordance with generally accepted accounting principles in the United States of America (“U.S. GAAP”) and pursuant to the regulations of the U.S. Securities and Exchange Commission (“SEC”) for interim financial information and, therefore, omit or condense certain footnotes and other information normally included. The condensed financial statements include all adjustments (consisting only of normal recurring adjustments), that management of the Company believes are necessary for a fair statement of the periods presented. These interim financial results are not necessarily indicative of results expected for the full fiscal year. The December 31, ~~2021~~2022 condensed balance sheet data was derived from audited financial statements, but does not include all disclosures required by U.S. GAAP.

The accompanying unaudited condensed financial statements and related financial information should be read in conjunction with the Company’s annual audited financial statements and the related notes thereto for the fiscal year ended December 31, ~~2021,~~2022, included in the Annual Report on Form 10-K (the “Annual Report”) as filed with the SEC.

Note 3. Revenue from Contracts with Customers

Disaggregation of Revenue

The following table summarizes the Company’s product and service revenue disaggregated by geographic region, which is determined based on customer location, for the three ~~and nine~~ months ended ~~September 30, 2022~~March 31, 2023 and ~~2021:~~2022:


	Three Months Ended September 30,				Nine Months Ended September 30,				Three Months Ended March 31,
	2022		2021		2022		2021		2023		2022
United States	$	4,367	$	3,521	$	12,434	$	10,901	$	4,264	$	3,970
South Korea		74		1,165		2,170		3,353		9		1,434
Europe		805		908		3,380		2,718		1,538		1,619
Asia (excluding South Korea)		932		1,278		2,483		2,453		708		780
Other		98		115		373		276		104		138
Total1	$	6,276	$	6,987	$	20,840	$	19,701	$	6,623	$	7,941

The table above does not include lease revenue of $~~1,472~~1,629 and $~~1,285~~1,399 for three months ended ~~September 30,~~March 31, 2023 and 2022, ~~and 2021, respectively, and $4,286~~ ~~and $3,536~~ ~~for the nine months ended September 30, 2022 and 2021,~~ respectively. Substantially all lease revenue originates from the United States. Refer to Note 5, Leases.

Contract Balances

The following table provides information about receivables and contract liabilities from contracts with customers:


	Classification	As of September 30, 2022		As of December 31, 2021		Classification	As of March 31, 2023		As of December 31, 2022
Accounts receivable, current	Accounts receivable, net	$	3,560	$	4,638	Accounts receivable, net	$	4,660	$	6,040
Notes receivable, current	Notes receivable, net	$	126	$	350	Notes receivable, net	$	203	$	200
Notes receivable, long-term	Notes and other receivables, long-term, net	$	—	$	121	Notes and other receivables, long-term, net	$	768	$	442
Contract asset, current	Prepaid and other current assets	$	26	$	—	Prepaid and other current assets	$	404	$	332
Contract asset, long-term	Other assets	$	41	$	—
Deferred revenue, current	Deferred revenue	$	789	$	904	Deferred revenue	$	1,032	$	768
Deferred revenue, non-current	Other long-term liabilities	$	22	$	66	Other long-term liabilities	$	198	$	17
Contract liability, current	Other current liabilities	$	19	$	—
Contract liability, long-term						Other long-term liabilities	$	161	$	150

Accounts Receivables, Net – Accounts receivables, net, include amounts billed and due from customers. The amounts due are stated at their net estimated realizable value and are classified as current or noncurrent based on the timing of when the Company expects to receive payment. Most customers are on pre-paid or 30-day payment terms, depending on the product purchased. The Company

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

maintains an allowance for expected credit losses to provide for the estimated amount of receivables that will not be collected. The

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

allowance is based upon an assessment of customer credit worthiness, historical payment experience, the age of outstanding receivables, collateral to the extent applicable and reflects the possible impact of current conditions and reasonable forecasts not already reflected in historical loss information.

The following table summarizes the activity in the allowance for accounts receivable:


				Amount
Accounts receivable, allowance for credit losses as of December 31, 2022				$	56
Provision for credit losses					(13	)
Write-offs					—
Accounts receivable, allowance for credit losses as of March 31, 2023				$	43
	Amount
Accounts receivable, allowance for credit losses as of December 31, 2021	$	47		$	47
Provision for credit losses		1			3
Write-offs		(17	)		(16	)
Accounts receivable, allowance for credit losses as of September 30, 2022	$	31

Accounts receivable, allowance for credit losses as of December 31, 2020	$	19
Provision for credit losses		9
Write-offs		—
Accounts receivable, allowance for credit losses as of September 30, 2021	$	28
Accounts receivable, allowance for credit losses as of March 31, 2022				$	34

Notes Receivables, Net – Notes receivable, net includes amounts billed and due from customers under extended payment terms with a significant financing component. Interest rates on notes receivable range from 5.0% to ~~5.75~~7.0%. The Company recorded interest income on notes receivable during the three months ended ~~September 30,~~March 31, 2023 and 2022 ~~and 2021~~ of $312 and $8~~, respectively, and during the nine months ended September 30, 2022 and 2021 of $~~11 ~~and $~~276, respectively, in other income, net in the statement of operations.

The following table summarizes the activity in the allowance for notes receivable:


				Amount
Notes receivable, allowance for credit losses as of December 31, 2022				$	13
Provision for credit losses					7
Write-offs					—
Notes receivable, allowance for credit losses as of March 31, 2023				$	20
	Amount
Notes receivable, allowance for credit losses as of December 31, 2021	$	63		$	63
Provision for credit losses		(1	)		129
Write-offs		(59	)		(11	)
Notes receivable, allowance for credit losses as of September 30, 2022	$	3

Notes receivable, allowance for credit losses as of December 31, 2020	$	18
Provision for credit losses		(6	)
Write-offs		—
Notes receivable, allowance for credit losses as of September 30, 2021	$	12
Notes receivable, allowance for credit losses as of March 31, 2022				$	181

Contract Assets – The Company's contract assets represent revenue recognized for performance obligations completed before an unconditional right to payment exists, and therefore invoicing has not yet occurred. The Company classifies contract assets in Prepaid and other current assets in the Company's condensed balance sheets.

The following table provides information about contract assets from contracts with customers:


	Amount			Amount
Contract assets as of December 31, 2021	$	—
Contract assets as of December 31, 2022				$	332
Contract assets recognized		70			117
Payments received		(3	)		(45	)
Contract assets as of September 30, 2022	$	67
Contract assets as of March 31, 2023				$	404

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

Contract Liabilities – The Company’s contract liabilities represent services and products sold to customers for which the performance obligation has not been completed by the Company. The Company classifies contract liabilities as current or noncurrent based on the

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

timing of when it expects to recognize revenue. The noncurrent portion of contract liabilities is included in other long-term liabilities in the Company’s condensed balance sheets.

The following table provides information about contract liabilities from contracts with customers:


				Amount
Contract liabilities as of December 31, 2022				$	935
Billings not yet recognized as revenue					823
Beginning contract liabilities recognized as revenue					(367	)
Contract liabilities as of March 31, 2023				$	1,391
	Amount
Contract liabilities as of December 31, 2021	$	970		$	970
Billings not yet recognized as revenue		674			432
Beginning contract liabilities recognized as revenue		(814	)		(361	)
Contract liabilities as of September 30, 2022	$	830

Contract liabilities as of December 31, 2020	$	1,051
Billings not yet recognized as revenue		784
Beginning contract liabilities recognized as revenue		(826	)
Contract liabilities as of September 30, 2021	$	1,009
Contract liabilities as of March 31, 2022				$	1,041

Transaction Price Allocated to Future Performance Obligations

At ~~September 30, 2022,~~March 31, 2023, the revenue expected to be recognized in future periods related to performance obligations that are unsatisfied for executed contracts with an original duration of one year or more was approximately $~~5,200~~8,974. The Company expects to satisfy its remaining performance obligations by December 31, ~~2026,~~2027, with $~~1,258~~ ~~to be satisfied by December 31,~~ ~~2022, $2,570~~2,947 to be satisfied by December 31, 2023, $~~812~~2,639 to be satisfied by December 31, 2024, $~~487~~1,865 to be satisfied by December 31, 2025, $883 to be satisfied by December 31, 2026 and $73640 to be satisfied thereafter. The Company does not disclose the value of unsatisfied performance obligations for (i) contracts with original expected lengths of one year or less or (ii) contracts for which the Company recognizes revenue at the amount to which it has the right to invoice for the products delivered or services performed.

Note 6. Intangible Assets

The components of intangible assets were as follows:


	As of September 30, 2022							As of December 31, 2021							As of March 31, 2023							As of December 31, 2022
	Gross Carrying Amount		Accumulated Amortization			Net Carrying Amount		Gross Carrying Amount		Accumulated Amortization			Net Carrying Amount		Gross Carrying Amount		Accumulated Amortization			Net Carrying Amount		Gross Carrying Amount		Accumulated Amortization			Net Carrying Amount
Finite-lived intangible assets:
Customer relationships 1,2	$	4,292	$	(1,944	)	$	2,348	$	4,292	$	(1,685	)	$	2,607	$	4,292	$	(2,113	)	$	2,179	$	4,292	$	(2,028	)	$	2,264
Acquired technology 1,3,4		13,900		(3,850	)		10,050		11,500		(3,275	)		8,225		13,900		(4,234	)		9,666		13,900		(4,042	)		9,858
Acquired trademarks 1		570		(570	)		—		570		(532	)		38		570		(570	)		—		570		(570	)		—
	$	18,762	$	(6,364	)	$	12,398	$	16,362	$	(5,492	)	$	10,870	$	18,762	$	(6,917	)	$	11,845	$	18,762	$	(6,640	)	$	12,122

Certain intangible assets were established upon PDL BioPharma, Inc.’s acquisition of LENSAR in May 2017. They are being amortized on a straight-line basis over a period of 15 years. The intangible assets for customer relationships are amortized on a straight-line basis or a double declining basis over their estimated useful lives up to 20 years based on the method that better represents the economic benefits to be obtained.

LENSAR acquired certain intangible assets for customer relationships from a domestic distributor in an asset acquisition, which are being amortized on a straight-line basis over a period of 10 years.

LENSAR acquired certain intangible assets from a medical technology company in an asset acquisition, which are being amortized on a straight-line basis over a period of 15 years.

In 2019, LENSAR acquired certain intellectual property from a ~~third-party. In connection~~third party. Pursuant to the Company's agreement with the ~~agreement,~~third party, the Company made milestone payments of $2,400 ~~were contingent upon regulatory approval and commercialization of~~during the ~~ALLY System. Refer to Note 8,~~ ~~Commitments and Contingencies,~~ ~~for further discussion about the contingent consideration.~~year ended December 31, 2022. The intangible assets will be amortized on a straight-line basis over a period of 15 years.

Amortization expense for three months ended ~~September 30,~~March 31, 2023 and 2022 ~~and 2021~~ was $276 and $309~~, respectively, and for the nine months ended September 30, 2022 and 2021 was $872~~ ~~and $931~~, respectively.

Based on the intangible assets recorded at ~~September 30, 2022,~~March 31, 2023, and assuming no subsequent additions to or impairment of the underlying assets, the remaining amortization expense is expected to be as follows:


Fiscal Year	Amount		Amount
Remainder of 2022		277
2023		1,097
Remainder of 2023				821
2024		1,165		1,165
2025		1,234		1,234
2026		1,224		1,224
2027		1,215		1,215
2028				1,008
Thereafter		6,186		5,178
Total remaining estimated amortization expense	$	12,398	$	11,845

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

Note 10. Stock-Based Compensation

Stock-Based Incentive Plans

The 2020 Plan

In July 2020, the Board of Directors approved the LENSAR Inc. 2020 Incentive Award Plan (the “2020 Plan”). The 2020 Plan provides for the grant of stock options, restricted stock, restricted stock unit awards and other stock-based awards to recipients. The amount and terms of grants are determined by the Company’s Board of Directors or a duly authorized committee thereof. Participants must pay the Company, or make provisions to pay, any required withholding taxes by the date of the event creating the tax liability. Participants may satisfy the tax liability in cash or in stock. A total of 3,333 shares of common stock were initially reserved for issuance pursuant to the 2020 Plan. The number of shares available for issuance under the 2020 Plan includes an annual increase on the first day of each fiscal year beginning fiscal 2021, equal to the lesser of (i) 5% of the aggregate number of shares outstanding on the final day of the immediately

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

preceding calendar year and (ii) such smaller number of shares as determined by the Board of Directors. As of ~~September 30, 2022~~March 31, 2023 the Company has reserved ~~4,429~~4,984 shares of common stock for issuance under the 2020 Plan.

A summary of the shares available for issuance under the 2020 Plan is as follows:


	Number of Shares
Balance at December 31, ~~2021~~2022		~~1,082~~		1,002
Authorized		~~549~~		555
Granted/Awarded		(~~677~~834	)
Cancelled		43		51
Balance at ~~September 30, 2022~~March 31, 2023		~~997~~		774

Stock Options

The exercise price of incentive stock options (“ISOs”) and nonqualified stock options (“NSOs”) shall not be less than 100% of the fair market value on the grant date of the option and the term may not exceed 10 years. The exercise price of ISOs granted to a 10% stockholder shall not be less than 110% of the estimated fair market value on the grant date of the option and the term may not exceed five years. To date, options have a term of 10 years and generally vest over one to four years from the grant date.

Option award activity under the 2020 Plan is set forth below:

Options Outstanding

Number of Shares

Weighted Average Exercise Price

Weighted Average Remaining Contractual Term (In Years)

Aggregate Intrinsic Value

Outstanding at December 31, 2021

653

$
7.57

9.3

$
—

Options granted

591

$
6.19

Options exercised

—

$
—

Options cancelled

(37
)

$
6.89

Outstanding at September 30, 2022

1,207

$
6.91

8.9

$
—

Vested and expected to vest at September 30, 2022

1,207

$
6.91

8.9

$
—

Vested and exercisable at September 30, 2022

373

$
7.52

8.6

$
—


	Options Outstanding
	Number of Shares			Weighted Average Exercise Price		Weighted Average Remaining Contractual Term (In Years)		Aggregate Intrinsic Value
Outstanding at December 31, 2022		1,202		$	6.91		8.7	$	—
Options granted		367		$	2.66
Options exercised		—		$	—
Options cancelled		(22	)	$	5.32
Outstanding at March 31, 2023		1,547		$	5.93		8.7	$	—

Vested and expected to vest at March 31, 2023		1,547		$	5.93		8.7	$	—
Vested and exercisable at March 31, 2023		617		$	7.17		8.2	$	—

The weighted average grant date fair value of options granted during the three ~~and nine~~ months ended ~~September 30, 2022~~March 31, 2023 was $~~3.69~~1.73 ~~and $3.90, respectively.~~. The total fair value of options vested during the three ~~and nine~~ months ended ~~September 30, 2022~~March 31, 2023 was approximately $~~461~~1,209 ~~and $2,082, respectively.~~. Total unrecognized compensation expense of $~~3,161~~2,891 related to stock options will be recognized over a weighted average period of ~~2.7~~2.8 years.

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

The following table summarizes information about stock options outstanding and vested as of December 31, 2022:


	Options Outstanding						Options Vested
Exercise Price	Options Outstanding		Weighted Average Remaining Contractual Term (in Years)		Weighted Average Exercise Price		Number Exercisable		Weighted Average Exercise Price
$2.65		349		9.8	$	2.65		—	$	—
$3.05 - $5.95		36		9.4	$	5.11		3	$	5.95
$6.04		421		8.7	$	6.04		125	$	6.04
$6.07 - $7.08		390		8.3	$	6.94		235	$	6.97
$7.13 - $8.62		351		8.0	$	8.01		254	$	7.92
		1,547		8.7	$	5.93		617	$	7.17

The Company estimated the fair value of stock-options using the Black-Scholes option pricing model. The fair value of stock options is being amortized on a straight-line basis over the requisite service period of the awards. The fair value of stock options was estimated using the following assumptions for the three ~~and nine~~ months ended ~~September 30, 2022~~March 31, 2023 and ~~2021:~~2022:


	Three Months Ended September 30,		Nine Months Ended September 30,		Three Months Ended March 31,
	2022	2021	2022	2021	2023	2022
Risk-free interest rate	2.7 - 3.4%	0.8 - 1.1%	1.5 - 3.4%	0.6 - 1.1%	3.5 - 4.2%	1.5 - 1.6%
Expected term (years)	6	6	6	6	6	6
Expected volatility	70%	73%	70%	72 - 73%	70%	70%
Dividends	0.0%	0.0%	0.0%	0.0%	0.0%	0.0%

Expected term: The expected term for the Company’s stock-based compensation awards was based on an index of the expected terms of a group of comparable publicly-traded medical device and other peer companies, which the Company believed was representative of the expected term of its awards.

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

Risk-free interest rate: The risk-free interest rate was based on the rates paid on securities issued by the U.S. Treasury with a term approximating the expected term.

Expected volatility: The expected volatility for the Company’s stock-based compensation awards was based on an index of the historical volatilities of a group of comparable publicly-traded medical device and other peer companies, which the Company believed was representative of the volatility of its common stock.

Expected dividend yield: The Company does not intend to pay dividends for the foreseeable future. Accordingly, the Company used a dividend yield of zero in the assumptions.

Restricted stock has the same rights as other issued and outstanding shares of the Company’s common stock. The compensation expense related to these awards is determined using the fair market value of the Company’s common stock on the date of the grant. Under the Company’s restricted stock plans, restricted stock awards typically vest over three years and compensation expense associated with these awards is recognized on a straight-line basis over the vesting period.

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

The total fair value of restricted stock awards vested during the three ~~and nine~~ months ended ~~September 30, 2022~~March 31, 2023 was approximately $~~1,154~~2,419 ~~and $6,086, respectively.~~. At ~~September 30, 2022~~March 31, 2023 there was approximately $~~3,962~~1,643 of total unrecognized compensation expense related to restricted stock awards, which is expected to be recognized over a weighted-average period of ~~0.9~~0.4 years. The number of restricted stock awards that are expected to vest are as follows: ~~113~~ ~~in the quarter ending December 31, 2022;~~ ~~237~~ ~~in the quarter ending March 31, 2023;~~ 136 in the quarter ending June 30, 2023; ~~174~~169 in the quarter ending September 30, 2023; and 75 in the quarter ending December 31, 2023. These are based on restricted stock awards outstanding at ~~September 30, 2022~~March 31, 2023 and assumes the requisite service period is fulfilled for all awards outstanding. Actual vesting in future periods may vary from those reflected above.

Restricted stock units granted to employees and non-employees generally vest over one to four years in annual equal increments. The fair value of restricted stock units is based on the Company’s closing stock price on the date of grant.

The total fair value of restricted stock units vested during the three months ended March 31, 2023 was approximately $91. At ~~September 30, 2022~~March 31, 2023 there was approximately $~~414~~1,334 of total unrecognized compensation expense related to restricted stock units, which is expected to be recognized over a weighted-average period of ~~2.5~~2.0 years.

In September 2020, the Board of Directors approved the LENSAR, Inc. 2020 Employee Stock Purchase Plan (the “2020 ESPP”), under which eligible employees are permitted to purchase common stock at a discount through payroll deductions. A total of 340 shares of common stock ~~are~~were initially reserved for issuance. The number of shares available for issuance ~~and will be increased~~under the 2020 ESPP includes an increase on the first day of each fiscal year, beginning in 2022, by an amount equal to the lesser of (i) 1.0% of the outstanding shares of common stock as of the last day of the immediately preceding fiscal year; or (ii) a lesser amount as determined by the Board of Directors. As of March 31, 2023, the Company has reserved 451 shares of common stock for issuance under the 2020 ESPP. The price of the common stock purchased will be the lower of 85% of the fair market value of the common stock at the beginning of an offering period or at the end of a purchase period. The 2020 ESPP is intended to qualify as an "employee stock purchase plan" within the meaning of Section 423 of the ~~IRC.~~Internal Revenue Code of 1986.

As of ~~September 30, 2022, 94~~March 31, 2023, 164 shares of common stock have been issued to employees participating in the 2020 ESPP and ~~246~~287 shares were available for future issuance under the 2020 ESPP. The grant date fair value of the shares to be issued under the Company’s 2020 ESPP was estimated using the Black-Scholes valuation model.

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

The amounts included in this table are based on restricted stock awards, restricted stock units, and stock options outstanding at ~~September 30, 2022~~March 31, 2023 and assumes the requisite service period is fulfilled for all awards outstanding. Actual stock-based compensation expense in future periods may vary from those reflected in the table.

Note 11. Net Loss per Share

The following is a reconciliation of the numerator (net loss) and the denominator (number of shares) used in the basic and diluted net loss per share calculations:


	Three Months Ended September 30,						Nine Months Ended September 30,						Three Months Ended March 31,
	2022			2021			2022			2021			2023			2022
Net loss	$	(3,991	)	$	(6,155	)	$	(17,424	)	$	(15,699	)	$	(4,272	)	$	(6,674	)
Weighted average number of shares of common stock		10,225			9,439			10,089			9,308			10,716			9,967
Basic and diluted net loss per share	$	(0.39	)	$	(0.65	)	$	(1.73	)	$	(1.69	)	$	(0.40	)	$	(0.67	)

The Company’s basic net loss per share attributable to common stockholders is computed by dividing the net loss attributable to common stockholders by the weighted-average number of shares of common stock outstanding during the period.

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

As the Company has reported a net loss for all periods presented, basic and diluted net loss per share attributable to common stockholders are the same for those periods. The Company excluded ~~821~~894 shares of underlying unvested restricted stock awards and units and ~~1,207~~1,547 outstanding stock options for the three ~~and nine~~ months ended ~~September 30, 2022~~March 31, 2023 and ~~1,452~~1,049 shares of underlying unvested restricted stock awards and units and ~~652~~1,102 outstanding stock options for the three ~~and nine~~ months ended ~~September 30, 2021~~March 31, 2022 from its net loss per diluted share calculations because their effect was anti-dilutive.

The anti-dilutive weighted average shares excluded from the diluted net loss per share diluted shares calculations were:

Three Months Ended
September 30,

Nine Months Ended
September 30,

2022

2021

2022

2021

Restricted stock awards and units

882

1,097

982

1,190

Outstanding stock options

1,199

649

1,131

436

Total

2,081

1,746

2,113

1,626

NOTES TO CONDENSED INTERIM FINANCIAL STATEMENTS
(Unaudited)
(Dollars and shares in thousands)

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our condensed financial statements and the related notes included elsewhere in this Quarterly Report, as well as the audited financial statements and the related notes thereto, and the discussion under “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business” included in the Annual Report. Some of the information contained in this discussion and analysis or set forth elsewhere in this Quarterly Report, including information with respect to our plans and strategy for our business, includes forward-looking statements that involve risks, uncertainties and other factors that could cause actual results to differ materially from those made, projected or implied in the forward-looking statements. Please see the “Risk ~~Factor~~Factors Summary” and “Risk Factors” sections for a discussion of the uncertainties, risks and assumptions associated with these statements.

We are a commercial-stage medical device company focused on designing, developing and marketing an advanced femtosecond laser system for the treatment of cataracts and the management of pre-existing or surgically induced corneal astigmatism. Our systems incorporate a range of proprietary technologies designed to assist the surgeon in obtaining better visual outcomes, efficiency and reproducibility by providing advanced imaging, simplified procedure planning, efficient design and precision. We believe the cumulative effect of these technologies results in a laser system that can be quickly and efficiently integrated into a surgeon’s existing practice, is easy to use and provides surgeons the ability to deliver improved visual outcomes.

Our current product portfolio includes the LENSAR Laser System ~~with Streamline IV and IntelliAxis (both our first generation~~ and ALLY ~~Systems)~~® Adaptive Cataract Treatment System, or ALLY System, and its associated consumable components. The consumable portion of the system consists of a disposable patient interface device kit, or PID kit, and the system also requires a procedure license. Each procedure on each system requires the use of a PID kit. The PID kit includes a suction ring, vacuum filter and fluidic connection that are designed to facilitate placement of the laser while minimizing a patient’s discomfort, intraocular pressure and trauma to the retina and maintaining corneal integrity. The procedure license is downloaded onto the system as required or as purchased by the customer. The system will not perform a procedure without a valid license. We sell licenses individually and also offer licenses in a subscription package with minimum monthly obligations and the ability to increase procedure numbers as the practice grows to address occasional increases in demand. We believe this structure allows the surgeon to implement a budget while also providing us with a predictable revenue stream.

We are focused on continuous innovation and have launched our proprietary next generation ~~ALLY™ Adaptive Cataract Treatment System, or~~ ALLY System. The ALLY System, which has received clearance from the U.S. Food and Drug Administration, or FDA, enables cataract surgeons to complete the femtosecond-laser-assisted cataract surgery, or FLACS, procedure seamlessly in a single, sterile environment. ~~This~~Our ALLY System received clearance isfrom the ~~first stage of a planned, two step commercial release strategy. We are coordinating~~FDA in June 2022, and we executed a controlled and targeted initial launch of the ALLY System ~~throughout the remainder of~~beginning in August 2022. The ALLY System is ~~expected~~now available to ~~be made widely available to~~all U.S. cataract surgeons and has also received regulatory clearance in ~~2023.~~India. Our ability to place systems in 2022 ~~has been~~was limited by supply chain constraints that ~~have~~ delayed the delivery of certain ALLY System raw materials and the completion and testing of ALLY Systems for use as launch-stock inventory. The FDA clearance is the first stage of a planned, two step commercial release strategy. As the second stage of the ~~commercial release~~ strategy, we plan to seek an additional 510(k) clearance for the phacoemulsification features of the ALLY System in a subsequent 510(k) submission subject to a third party’s phacoemulsification device receiving clearance and serving as ~~the~~a predicate device. As this device will be considered the predicate device for purposes of evaluating the ALLY System’s phacoemulsification functionality, we are unable to submit ~~our second~~a 510(k) submission seeking clearance of the phacoemulsification features within the ALLY System until the predicate device receives FDA clearance. Accordingly, we ~~have delivered~~are delivering the ALLY System to surgeons ~~in the initial launch~~ with the phacoemulsification features ~~remaining~~ disabled and/or removed and expect this to continue. We believe the ALLY System’s enhanced efficiencies and potential for combined functions in the future will help drive broader penetration for us into the overall cataract surgery market and could create a paradigm shift in the treatment of cataracts and management of astigmatism in cataract surgery. We believeremoved. In 2022, ~~is a transition year for the Company, as~~ we ~~have~~ transitioned from manufacturing and selling our LENSAR Laser System ~~and are focusing~~to focus on our ALLY System. In September 2022, we submitted the ALLY System for certification in the European Union, or EU, and we intend to submit additional marketing or certification applications outside the United States in an effort to commercialize the ALLY System in additional countries and operating regions. Our growth, market presence and ability to sell the ALLY System will depend on whether the ALLY System receives regulatory clearance in ~~that region,~~other regions outside the United States and the timing of these clearances or certifications, among other factors. In addition, based on inventory of our LENSAR Laser System, our future revenue and cash flows will depend on, among other factors, our installed base of systems and the timing of and applicable clearances for our ALLY System.

We have built and are continuing to grow our commercial organization, which includes a direct sales force in the United States and distributors in Germany, China, South Korea and other targeted international markets. We believe there is significant opportunity for us to expand our presence in these countries and other markets and ~~regions.~~regions, subject to applicable regulatory clearance or certification. In the United States, we sell our products through a direct sales organization that, as of ~~September 30, 2022,~~March 31, 2023, consisted of approximately 4550 commercial professionals, including regional sales managers, clinical applications and outcomes specialists, field service, marketing, technical and customer support personnel. We manufacture our

systems at a facility in Orlando, Florida. We purchase custom and off-the-shelf components from a number of suppliers, including some single-source suppliers. We purchase custom and off-the-shelf components from a number of suppliers, including some single-source suppliers. We purchase the majority of our components and major assemblies through purchase orders with limited long-term supply agreements and generally do not maintain large volumes of finished

goods. We strive to maintain enough inventory of our various component parts to avoid the impact of potential disruptions in the supply chain; however, availability of these components can be outside of our control, especially with the impact of the ~~COVID-19 pandemic on the~~ global supply chain ofdisruptions with respect to certain products, including increasing lead times required for the ordering of component parts to meet targeted production goals, unpredictability with respect to suppliers’ ability to fulfill orders in the requested quantities within the agreed timeframe, and the ability to find alternative component parts.

Our revenue decreased from $9.3 million for the three months ended March 31, 2022 to $8.3 million for the three months ended ~~September 30, 2021 to $7.7 million for the three months ended September 30, 2022,~~March 31, 2023, representing a decrease of 6%12%, primarily due to decreased systems sales and decreased procedure volume. Our net losses were ~~$4.0~~$4.3 million and ~~$6.2~~$6.7 million for the three months ended ~~September 30,~~March 31, 2023 and 2022, ~~and 2021,~~ respectively. The decrease in net loss is primarily due to decreased research and development costs for the ALLY System. Our installed base of LENSAR Laser Systems and ALLY Systems is approximately ~~260~~275 as of ~~September 30, 2022.~~March 31, 2023.

Our revenue increased from $23.2 million for the nine months ended September 30, 2021 to $25.1 million for the nine months ended September 30, 2022, representing an increase of 8%, primarily due to increased procedure volume. Our net losses were $17.4 million and $15.7 million for the nine months ended September 30, 2022 and 2021, respectively. The increase in net loss is primarily due to pre-production inventory for the ALLY System, which was recorded as research and development expenses through April 30, 2022, when future commercialization of our ALLY System was considered probable and the future economic benefit was expected to be realized.

We operate in a highly competitive environment that involves a number of risks, some of which are beyond our control. We are subject to risks common to medical device companies, including risks inherent in:

We cannot provide assurance that we will generate significant revenues or achieve and sustain profitability in the future. In addition, we can provide no assurance that we will have sufficient funding to meet our future capital requirements.

Our revenues and operating expenses are also difficult to predict and depend on several factors, including the level of ongoing research and development requirements necessary to ~~complete development and~~further develop and/or obtain further regulatory clearance or certification of our ALLY System, the number of laser systems we manufacture, sell, and lease on an annual basis, the availability of capital and direction from regulatory agencies or notified bodies, which are difficult to predict. We may be able to control the timing and level of research and development and selling, general and administrative expenses, but many of these expenditures will occur irrespective of our actions due to contractually committed activities and payments.

On March 11, 2020, the World Health Organization declared a global pandemic, as the outbreak of a novel strain of coronavirus spread throughout the world. Actions taken to mitigate coronavirus have had, and are expected to continue to have, an impact on the geographical areas in which we operate, and we are continually making adjustments intended to assist in protecting the safety of our employees and communities and maintaining appropriate inventories and component parts to continue our business activities where possible and legally permitted. In response, we have increased safety stock of certain critical components and are continuously evaluating our supply chain to identify potential gaps and take steps intended to ensure business continuity.

Although procedure volume in 2021 and ~~the first three quarters of~~ 2022 ~~has~~ returned to ~~pre-pandemic~~ levels consistent with those seen prior to the start of the COVID-19 pandemic ~~continues~~in 2020, global supply chain disruptions that originated during the COVID-19 pandemic and other macroeconomic factors continue to influence our operations, particularly as it relates to building inventory for the ALLY System. We have experienced some supply chain disruptions and unavailability of various component parts needed for our systems, including increasing lead times required for the ordering of component parts to meet targeted production goals and unpredictability with respect to our suppliers’ ability to fulfill orders in the requested quantities, within the agreed timeframe, as well as an increase of costs associated with certain raw materials and component parts. To date, we have maintained sufficient inventory to mitigate significant adverse impact from such disruptions and unavailability in the near-term and to meet the expected needs of our ~~initial~~ launch of the ALLY System; however, we are continuing to monitor developments with respect to the outbreak and its potential impact on our operations and to our employees, distributors, partners, suppliers, and regulators. The lingering impacts of COVID-19 into ~~2022~~early 2023, along with global economic uncertainty, have impeded

global supply chains, resulted in longer lead times and delays in procuring component parts and raw materials, and resulted in inflationary cost increases in certain raw materials, labor and transportation. In particular, a global semiconductor supply shortage ~~resulting from the COVID-19 pandemic~~has had, and is ~~having~~continuing to have, wide-ranging effects across multiple ~~industries, and we are seeing more~~industries. We have seen significant disruptions in the supply of, timing of delivery of and fluctuations in pricing for various component parts needed for our products, including the integrated circuits used in our ~~systems. These~~systems, and expect these trends to continue. While we are not directly exposed to economic conditions in Russia or Ukraine, the ongoing war between Russia and Ukraine has also had a substantial impact on global supply chains and may be a contributing factor to the supply chain shortages we are experiencing. Supply chain disruptions and broad-based inflationary impacts have negatively impacted the Company’s financial condition, results of operations and cash flows since 2020 and these supply chain constraints may result in future impacts to our business. We expect these inflationary impacts to continue for the foreseeable future. A high rate of inflation in the future may have an adverse effect on our ability to maintain and increase our gross margin or decrease our operating expenses as a percentage of our revenues if our selling prices of our products do not increase as much or more than our increase in costs.

As a result of these and other factors, our historical results are not necessarily indicative of future performance, and any interim results we present are not indicative of the results that may be expected for the full fiscal year.

Total revenue comprises product revenue, service revenue and lease revenue. We derive product revenue from the sale of our laser systems and sales of our PIDs and procedure licenses to our surgeon customers and to our distributors outside the United States. A PID and procedure license, which may also be referred to as an application license, is required to perform each procedure using our laser system. A procedure license represents a one-time right to utilize the system surgical application in connection with a surgery procedure. Service revenue is derived from the sale of extended warranties for our laser systems that provide additional maintenance and service beyond our standard limited warranty. In some situations, we lease our laser systems to surgeons, primarily through non-cancellable leases with a fixed lease payment. We consider all components of our revenue to be recurring source revenue, with the exception of sales of our systems. For the three ~~and nine~~ months ended ~~September 30, 2022,~~March 31, 2023, approximately ~~88% and~~ 92% of our revenue ~~respectively,~~ was attributable to recurring sources, compared to ~~87% and~~ 89% for the three ~~and nine~~ months ended ~~September 30, 2021, respectively.~~March 31, 2022.

Total cost of revenue comprises cost of product revenue, cost of lease revenue and cost of service revenue.

Cost of product revenue primarily consists of the raw materials used in the manufacture of our products, plant overhead, personnel costs, such as salaries and wages, including stock-based compensation and benefits, packaging costs, depreciation expense, freight and other related costs, which include shipping, inspection and excess and obsolete inventory charges. Cost of service revenue primarily consists of costs associated with providing maintenance services under our standard limited warranty as well as extended warranty contracts. Cost of lease revenue primarily consists of depreciation expense associated with leased equipment and shipping costs associated with delivery of these systems.

Our selling, general and administrative expenses consist primarily of personnel costs, such as salaries and wages, including stock-based compensation and benefits, professional fees, marketing, insurance, travel and other expenses.

We are continuing to grow our sales efforts in the United States. We expect our selling, general and administrative expenses to continue to increase in association with our planned growth. Additionally, we anticipate additional increases in selling, general and administrative expenses as we ~~launch~~commercialize the ALLY ~~System.~~System and make it more broadly available.

Our research and development expenses consist primarily of engineering, product development, clinical studies to develop and support our products, personnel costs, such as salaries and wages, including stock-based compensation and benefits, regulatory expenses, and other costs associated with products and technologies that are in development. Currently, our research and development expense primarily consists of costs associated with the continued development of our next generation system, the ALLY System, which combines all of the features from our LENSAR Laser System with a dual-pulse laser, integrated in a small, compact cataract treatment system that is designed to allow surgeons to perform a sterile femtosecond laser assisted cataract procedure in a single operating room or in-office surgical suite. Further development of the ALLY System is designed to combine our existing femtosecond laser technology with an option to add a phacoemulsification system into an integrated cataract treatment system. The Company recognized pre-launch inventory

costs as research and development expenses through April 30, 2022, when future commercialization of our ALLY System was considered probable and the future economic benefit was expected to be realized.

Intangible assets with finite useful lives consist primarily of acquired trademarks, acquired technology, and customer relationships. Acquired trademarks and acquired technology are amortized on a straight-line basis over their estimated useful lives of 15 to 20 years. Customer relationships are amortized on a straight-line basis or a double declining basis over their estimated useful lives up to 20 years, based on the method that better represents the economic benefits to be obtained.

Changes in our tax rates or exposure to additional tax liabilities could adversely affect our earnings and financial condition. Beginning in 2022, the Tax Cuts and Jobs Act eliminated the option of expensing all research and development expenditures in the current year, instead requiring amortization over five years for expenditures in the United States and over fifteen years for foreign-based expenditures, pursuant to Internal Revenue Code of 1986, Section 174, or Section 174. In the future, Congress may consider legislation that would eliminate the capitalization and amortization requirement. There is no assurance that the requirement will be deferred, repealed or otherwise modified. The impact of Section 174 on the Company’s cash from operations depends primarily on the amount of research and development expenditures incurred and whether the Internal Revenue Service issues guidance on the provision which differs from our current interpretation.

We have historically experienced seasonal variations in the sales and leases of our products, with our fourth quarter typically being the strongest and the first or third quarter being the slowest. We believe these seasonal variations are consistent across our industry.

Comparison of the Three ~~and Nine~~ Months Ended ~~September 30,~~March 31, 2023 and 2022 ~~and 2021~~


	Three Months Ended September 30,				Change from Prior			Nine Months Ended September 30,				Change from Prior			Three Months Ended March 31,				Change from Prior
(Dollars in thousands)	2022		2021		Year (%)			2022		2021		Year (%)			2023		2022		Year (%)
Revenue
Product	$	5,486	$	6,084		(10	)%	$	18,188	$	17,298		5	%	$	5,658	$	6,969		(19	)%
Lease		1,472		1,285		15	%		4,286		3,536		21	%		1,629		1,399		16	%
Service		790		903		(13	)%		2,652		2,403		10	%		965		972		(1	)%
Total revenue	$	7,748	$	8,272		(6	)%	$	25,126	$	23,237		8	%	$	8,252	$	9,340		(12	)%
Cost of revenue (exclusive of amortization)
Product	$	2,189	$	2,915		(25	)%	$	6,648	$	7,371		(10	)%	$	2,299	$	2,694		(15	)%
Lease		488		448		9	%		1,446		967		50	%		494		474		4	%
Service		1,182		1,058		12	%		3,559		2,696		32	%		1,139		1,480		(23	)%
Total cost of revenue	$	3,859	$	4,421		(13	)%	$	11,653	$	11,034		6	%	$	3,932	$	4,648		(15	)%

~~Three Months Ended September 30, 2022 compared with Three Months Ended September 30, 2021~~

Total revenue for the three months ended ~~September 30, 2022~~March 31, 2023 decreased by ~~$0.5~~$1.1 million, or 6%12%, compared to the three months ended ~~September 30, 2021.~~March 31, 2022.

Product revenue for the three months ended ~~September 30, 2022~~March 31, 2023 decreased by ~~$0.6~~$1.3 million, or ~~10%~~19%, compared to the three months ended ~~September 30, 2021.~~March 31, 2022. The decrease was primarily attributable to decreased procedure volume outside of the U.S. and Europe, ~~which resulted~~primarily associated with an approximate $1.5 million decrease in ~~a decrease of $0.5 million,~~procedure revenue in South Korea, during the three months ended ~~September 30,~~March 31, 2023, as compared to the three month period ended March 31, 2022. The decrease in ~~these procedures~~procedure volume was driven by ongoing cataract procedure reimbursement challenges between ophthalmic surgical practices and third-party payors in South ~~Korea.~~Korea partially offset by an increase in procedure volume in the United States and Europe of 13% and 5%, respectively. We anticipate these challenges in South Korea will continue for the near term. ~~However, procedure volume increased in the United States and Europe during~~

Service revenue for each of the three months ended ~~September 30,~~March 31, 2023 and 2022 ~~as compared to the three months ended September 30, 2021.~~

~~Service revenue for the three months ended September 30, 2022 decreased by $0.1 million, or 13%, compared to the three months ended September 30, 2021.~~was $1.0 million. Our U.S. sales represented ~~70%~~64% and 50% of product and service revenue for the three months ended ~~September 30,~~March 31, 2023 and 2022, ~~and 2021,~~ respectively.

Lease revenue for the three months ended ~~September 30, 2022~~March 31, 2023 increased by $0.2 million, or ~~15%~~16%, compared to the three months ended ~~September 30, 2021.~~

~~Nine Months Ended September 30, 2022 compared with Nine Months Ended September 30, 2021~~

~~Total revenue for the nine months ended September 30, 2022 increased by $1.9 million, or 8%, compared to the nine months ended September 30, 2021.~~

Product revenue for the nine months ended September 30, 2022 increased by $0.9 million, or 5%, compared to the nine months ended September 30, 2021. The increase was primarily attributable to increased procedure volume, which resulted in an increase of $1.4 million, offset by a decrease in system sales of $0.5 million as we completed placement of the last new LENSAR Laser Systems in inventory as part of our operational transition to the ALLY System’s commercial launch and commenced sales of the ALLY System in the third quarter ofMarch 31, 2022.

Service revenue for the nine months ended September 30, 2022 increased by $0.2 million, or 10%, compared to the nine months ended September 30, 2021 primarily due to the increased number of systems installed.

The increase in product and service revenue combined was primarily attributable to increased net revenues in most of our operating regions as procedure volume was higher than during the equivalent period in 2021. Our U.S. sales represented 60% and 55% of product and service revenue for the nine months ended September 30, 2022 and 2021, respectively.

~~Lease revenue for the nine months ended September 30, 2022 increased by $0.8 million, or 21%, compared to the nine months ended September 30, 2021.~~

~~Three Months Ended September 30, 2022 compared with Three Months Ended September 30, 2021~~

Total cost of revenue for the three months ended ~~September 30, 2022~~March 31, 2023 decreased by ~~$0.6~~$0.7 million, or ~~13%~~15%, compared to the three months ended ~~September 30, 2021.~~March 31, 2022.

Cost of product revenue for the three months ended ~~September 30, 2022~~March 31, 2023 decreased by ~~$0.7~~$0.4 million, or ~~25%~~15%, compared to the three months ended ~~September 30, 2021.~~March 31, 2022. The lower cost of product revenue was attributable to ~~the decreased number of system sales in the 2022 period, which have a lower gross margin than procedure licenses, and~~ decreased procedure volume between the periods. We expect cost of product revenue to fluctuate in future periods as supply chain challenges have resulted in higher costs of ALLY System inventory and availability of systems; however, these increases are partially offset by ALLY System raw materials and production costs through April 2022 being charged to research and development expenses rather than inventory.

Cost of service revenue for the three months ended ~~September 30, 2022~~March 31, 2023 decreased by ~~$0.1~~$0.3 million, or ~~12%~~23%, compared to the three months ended ~~September 30, 2021~~March 31, 2022 primarily due to ~~higher~~lower service costs.

Cost of lease revenue for the three months ended ~~September 30,~~March 31, 2023 and 2022 ~~increased by $40,000, or 9%, compared to the three months ended September 30, 2021. Cost of lease revenue increased primarily due to depreciation of newly leased systems.~~

~~Nine Months Ended September 30, 2022 compared with Nine Months Ended September 30, 2021~~

~~Total cost of revenue for the nine months ended September 30, 2022 increased by $0.6 million, or 6%, compared to the nine months ended September 30, 2021.~~

~~Cost of product revenue for the nine months ended September 30, 2022 decreased by $0.7 million, or 10%, compared to the nine months ended September 30, 2021. The lower cost of product revenue~~ was attributable to the decreased number of sales of LENSAR Laser Systems in the 2022 period, which have a lower gross margin than procedure licenses, offset by increased procedure volume between the periods. We expect cost of product revenue to fluctuate in future periods as supply chain challenges have resulted in higher costs of ALLY System inventory and have limited, and created inefficiencies with, ALLY System production. We expect these higher costs to offset with ALLY System raw materials and production being expensed to research and development expenses rather than into inventory through April 2022.

~~Cost of service revenue for the nine months ended September 30, 2022 increased by $0.9 million, or 32%, compared to the nine months ended September 30, 2021 primarily due to higher service costs.~~

~~Cost of lease revenue for the nine months ended September 30, 2022 increased by~~ $0.5 million ~~or 50%, compared to the nine months ended September 30, 2021. Cost~~and consists primarily of ~~lease revenue increased primarily due to~~ depreciation of ~~newly~~ leased systems.

~~Three Months Ended September 30, 2022 compared with Three Months Ended September 30, 2021~~

Selling, General and Administrative. Selling, general and administrative expenses for the three months ended ~~September 30, 2022~~March 31, 2023 were ~~$6.1~~$6.8 million, ~~a decrease~~an increase of ~~$0.4~~$0.5 million, or 6%8%, compared to ~~$6.5~~$6.3 million for the three months ended ~~September 30, 2021.~~March 31, 2022. The ~~decrease~~increase was due primarily to ~~decreases~~an increase in sales and marketing expenses ~~of $0.5 million,~~ due to ~~timing~~the commercial launch of ~~trade show and travel activity.~~the ALLY System. We expect selling, general and administrative expense to increase from current levels as we continue to launch the ALLY System.

Research and Development. Research and development expenses for the three months ended ~~September 30, 2022~~March 31, 2023 were ~~$1.6~~$1.7 million, a decrease of ~~$1.6~~$3.1 million, or ~~50%~~66%, compared to ~~$3.2~~$4.8 million for the three months ended ~~September 30, 2021.~~March 31, 2022. The decrease was primarily attributable to significantly lower development costs ~~for the development of~~associated with the ALLY ~~System~~System's clearance by the FDA in the ~~three months ended September 30,~~second quarter of 2022, ~~including $0.9~~which included approximately $2.4 million of ~~ALLY System~~ inventory costs that was expensed to research and development in the three months ended ~~September 30, 2021.~~March 31, 2022. Following our receipt of 510(k) clearance for the ALLY System from the FDA in June 2022, all ALLY System inventory costs ~~were~~are being capitalized to inventory. With the clearance of the ALLY System in the United States, we expect a decrease in development activity and related costs incurred in the future.

Amortization of Intangible Assets. Amortization of intangible assets was $0.3 million for the three months ended ~~September 30, 2022,~~March 31, 2023, consistent with the three months ended ~~September 30, 2021.~~

~~Nine Months Ended September 30, 2022 compared with Nine Months Ended September 30, 2021~~

~~Selling, General and Administrative~~. Selling, general and administrative expenses for the nine months ended September 30, 2022 were $20.0 million, an increase of $1.9 million, or 10%, compared to $18.1 million for the nine months ended September 30, 2021. The increase was due to increases in sales and marketing expenses of $0.8 million, which was primarily the result of increased trade show and travel activity and $0.8 million of increased professional fees. We expect selling, general and administrative expense to increase from current levels as we continue the commercial launch of the ALLY System.

~~Research and Development~~. Research and development expenses for the nine months ended September 30, 2022 were $10.2 million, an increase of $1.3 million, or 14%, compared to $8.9 million for the nine months ended September 30, 2021. The increase was primarily attributable to increased expenses for the continued development of the ALLY System, as well as inventory costs for the manufacture of ALLY Systems, which amounted to approximately $3.4 million and $2.6 million during the nine months ended September 30, 2022 and 2021, respectively.

~~Amortization of Intangible Assets. Amortization of intangible assets was $0.9 million for the nine months ended September 30, 2022, consistent with the nine months ended September 30, 2021.~~March 31, 2022.

We prepare and analyze operating and financial data and non-GAAP measures to assess the performance of our business, make strategic and offering decisions and build our financial projections. The key non-GAAP measures we use, EBITDA and Adjusted EBITDA, are reconciled to net loss below for the three ~~and nine~~ months ended ~~September 30, 2022~~March 31, 2023 and ~~2021.~~2022.

EBITDA is defined as net loss before interest expense, interest income, income tax expense, depreciation and amortization expenses. EBITDA is a non-GAAP financial measure. EBITDA is included in this filing because we believe that EBITDA provides meaningful supplemental information for investors regarding the performance of our business and facilitates a meaningful evaluation of actual results on a comparable basis with historical results. Adjusted EBITDA is also a non-GAAP financial measure. We believe Adjusted EBITDA, which excludes stock-based compensation expense, provides meaningful supplemental information for investors when evaluating our results and comparing us to peer companies as stock-based compensation expense is a significant non-cash charge due to the recapitalization of the Company. We use these non-GAAP financial measures in order to have comparable financial results to analyze changes in our underlying business from quarter to quarter. However, there are a number of limitations related to the use of non-GAAP measures and their nearest GAAP equivalents. For example, other companies may calculate non-GAAP measures differently, or may use other measures to calculate their financial performance and, therefore, any non-GAAP measures we use may not be directly comparable to similarly titled measures of other companies. Investors should not consider our non-GAAP financial measures in isolation or as a substitute for an analysis of our results as reported under GAAP.

For the ~~nine~~three months ended ~~September 30,~~March 31, 2023 and 2022, ~~and 2021,~~ we had net losses of ~~$17.4~~$4.3 million and ~~$15.7~~$6.7 million, respectively, and as of ~~September 30, 2022,~~March 31, 2023, we had an accumulated deficit of ~~$95.0~~$101.8 million. We expect to continue to incur losses and operating cash outflows for the ~~foreseeable~~near future as we continue to build our commercial and clinical infrastructure and pursue further regulatory clearances of our ALLY System.

~~As discussed above, the ongoing COVID-19 pandemic has negatively affected our capital requirements and more operating capital may be needed to fund our operations in the future.~~

Our primary sources of liquidity are our cash and cash equivalents, cash from the sale and lease of our systems and the sale of our consumables. We maintain cash balances with financial institutions in excess of insured limits. As discussed above, ~~the~~ ongoing ~~COVID-19 pandemic has~~global supply chain disruptions, inflationary pressures and other macroeconomic conditions have negatively affected our capital requirements and more operating capital may be needed to fund our operations in the future. As of ~~September 30, 2022,~~March 31, 2023, we expect our current cash and cash equivalents, together with cash generated from the future sale and lease of our products and issuance of convertible preferred stock and warrants, to be sufficient to operate our ~~business into 2024.~~business. Based on our current operating plan, we believe we have sufficient cash and cash equivalents on hand to support current operations for at least one year from the date of issuance of the financial statements included in this Quarterly Report.

We expect selling, general and administrative expenses to increase from current levels due to the continued commercial launch of the ALLY System, particularly if supply chain constraints begin to ease. The successful commercialization of the ALLY System depends in part on the Company’s ability to produce the ALLY System in sufficient quantities, ~~and~~ within requested timing and at an acceptable price to satisfy customer demand. Ongoing supply chain disruptions, ~~and~~ unavailability of various parts needed to manufacture the ALLY System and price increases of component parts may have an adverse impact on the Company’s ability to meet customer demand for the ALLY System.

Our liquidity needs will be largely determined by ~~the success of~~ our ~~operations regarding the successful commercialization of~~ability to successfully commercialize our products and the progression, additional regulatory clearances or certifications and launch of the ALLY System in additional jurisdictions in the future. ~~Such success will depend in part on the availability of the necessary component parts for the ALLY System.~~

~~We believe~~In 2022, ~~is a transition year for the Company, as~~ we ~~have~~ transitioned from manufacturing and selling our LENSAR Laser System ~~and are focusing~~to focus on our ALLY System. In September 2022, we submitted the ALLY System for certification in the EU and we intend to submit additional marketing or certification applications outside the United States in an effort to commercialize the ALLY System in additional countries and operating regions. Our growth, market presence and ability to sell the ALLY System ~~in a particular region~~ will depend on whether the ALLY System receives regulatory clearance in ~~that region,~~other regions outside the United States and the timing of these clearance or certifications, among other factors. In addition, based on inventory of our LENSAR Laser System, our future revenue and cash flows will depend on, among other factors, our installed base of systems and the timing of and applicable clearances for our ALLY System.

~~We expect~~In the future, we ~~will~~may need to raise additional capital through equity or debt financings, borrowings under credit facilities or from other ~~sources to continue our operations beyond 2024.~~sources. We may issue securities, including common stock, preferred stock, warrants, and/or debt securities through private placement transactions or registered public offerings in the future. If we issue equity securities to raise additional capital, our existing stockholders may experience dilution, and the new equity securities may have rights, preferences and privileges senior to those of our existing stockholders. Debt financing, if available, may involve covenants restricting our operations or our ability to incur additional debt. Any debt financing or additional equity that we raise may contain terms that are not favorable to us or our stockholders. In addition, if we raise additional capital through collaboration, licensing or other similar arrangements, it may be necessary to relinquish valuable rights to our products, potential products or proprietary technologies, or grant licenses on terms that are not favorable to us.

On May 12, 2023, we entered into a Securities Purchase Agreement (the “SPA”) with NR-GRI Partners, LP (“NR-GRI”), whereby we agreed to sell to NR-GRI, for an aggregate purchase price of $20.0 million an aggregate of 20,000 shares of a newly established series of preferred stock designated as “Series A Convertible Preferred Stock, par value $0.01 per share” (the “Convertible Preferred Stock”), which have a stated value of $1,000 per share and will be convertible into shares of the Company’s common stock, and warrants (the “Warrants”) to purchase an aggregate of 4.4 million shares of our common stock. Upon issuance at the closing, 50% of the Warrants will have an exercise price equal to $2.45 per share, and 50% of the Warrants will have an exercise price equal to $3.0625 per share, subject in each instance to adjustments as provided under the terms of the Warrants. We anticipate that the transaction will close on May 19, 2023, subject to customary closing conditions, and that net proceeds from the transaction will be approximately $19.1 million after offering expenses. Additionally, the terms of our Convertible Preferred Stock we expect to issue will restrict our ability to incur debt in excess of $1.0 million.

Our ability to raise additional funds will depend, among other factors, on financial, economic and market conditions, many of which are outside of our control, and we may be unable to raise financing when needed, or on terms favorable to us. If the necessary funds are not available from these sources, we may have to delay, reduce or suspend the scope of our sales and marketing efforts, research and development activities, or other components of our operations. Any of these events could adversely affect our ability to achieve our business and financial goals or to achieve or maintain profitability and could have a material adverse effect on our business, financial condition and results of operations. Additionally, the extent and duration of the impact ~~the COVID-19 pandemic~~that global economic uncertainty may have on our stock price and on those of other companies in our industry is highly uncertain and may make us look less attractive to investors and, as a result, there may be a less active trading market for our common stock, our stock price may be more volatile, and our ability to raise capital could be impaired, which could in the future negatively affect our liquidity and financial position.

We expect our revenue and expenses to increase in connection with our on-going activities, particularly as we continue to execute on our growth strategy, including expansion of our sales and customer support teams. The primary factors determining our cash needs are the funding of operations, which we expect to continue to expand as the business grows, and enhancing our product offerings through the ~~research, development, and launch~~commercialization of the ALLY System, our next generation ~~integrated~~ cataract treatment system. Our future liquidity needs, and ability to address those needs, will largely be determined by the success of our commercial efforts and those of our distributors; the ongoing impact of COVID-19 and supply chain issues on our business; and the timing, scope and magnitude of our commercial and development activities.

Our material contractual obligations and commercial commitments at ~~September 30, 2022~~March 31, 2023 primarily consist of ~~$3.0~~$2.7 million in operating lease ~~payments~~liabilities for our facility lease and ~~$7.5~~$4.7 million in remaining minimum purchase obligations for inventory components for the manufacture and supply of certain components within the next 24 months. Our contractual obligations have increased due to supply chain issues that have necessitated us to enter into longer-term and more expensive per unit contracts to build and source inventory to satisfy the expected commercial demand for the ALLY System, if approved by regulatory authorities or certified by notified bodies in the applicable regions. ~~LENSAR expects~~We expect to meet these requirements through cash and cash equivalents and cash provided by operations. Some of these amounts are based on management’s estimates and assumptions about these obligations, including their duration, timing, anticipated actions by third parties and other factors. Because these estimates and assumptions are necessarily subjective, the obligations we will actually pay in future periods may vary from those described. Furthermore, the Company acquired certain intellectual property, which would result in additional royalty payments at a rate of 3% of certain revenue upon the phacoemulsification features being cleared for commercialization and operational in the ALLY ~~system.~~System.

We currently have an effective shelf registration statement on Form S-3 (No. 333-255136) filed with the SEC on April 8, 2021 (the “Registration Statement”) under which we may offer from time to time in one or more offerings any combination of common and preferred stock, debt securities, depositary shares, warrants, purchase contracts and units of up to $100.0 million in the aggregate. We also simultaneously entered into a sales agreement with SVB Leerink LLC, as sales agent, providing for the offering, issuance and sale by us of up to an aggregate $35.0 million of our common stock from time to time in “at-the-market” (“ATM”) offerings under the Registration Statement. Any sales by us pursuant to the Registration Statement, including any sales pursuant to the ATM offering, will be subject to any limits imposed under applicable law, including General Instructions I.B.1 and I.B.6 of Form S-3. ~~During~~No shares were sold under the ~~three months~~ATM during the quarters ended September 30, 2022, we sold 2,000 shares of our common stock, pursuant to ATM offerings, at a weighted average gross sales price of $6.46 per share. Proceeds from the sale were offset by offering costsMarch 31, 2023 and ~~commissions associated with the transactions.~~2022.

The following table summarizes, for the periods indicated, selected items in our condensed statements of cash flows:

Net cash used in operating activities for the ~~nine~~three months ended ~~September 30, 2022~~March 31, 2023 was ~~$10.1~~$6.7 million, consisting primarily of a net loss of ~~$17.4~~$4.3 million and a decrease in net operating assets of ~~$0.7~~$5.1 million, partially offset by non-cash charges of ~~$8.0~~$2.7 million. The decrease in net operating assets was primarily due to changes in inventories offset by changes in accounts receivable and ~~accounts payable.~~accrued liabilities. Non-cash charges primarily consisted of depreciation, amortization, and stock-based compensation.

Net cash used in operating activities for the ~~nine~~three months ended ~~September 30, 2021~~March 31, 2022 was ~~$8.2~~$2.6 million, consisting primarily of a net loss of ~~$15.7~~$6.7 million and a decrease in net operating assets of ~~$0.7~~$1.3 million, partially offset by non-cash charges of ~~$8.1~~$2.7 million. The decrease in net operating assets was primarily due to changes in accounts receivable, inventories and accrued liabilities offset by changes in prepaid and other current assets. Non-cash charges primarily consisted of depreciation, amortization, and stock-based compensation.

~~Net cash used in investing activities for the nine months ended September 30, 2022 was $0.1 million, which consisted primarily of capital expenditures for property and equipment.~~

~~Net cash used in investing activities for the nine months ended September 30, 2021 was $0.2 million, which consisted primarily of capital expenditures for property and equipment.~~

Net cash used in financing activities for the nine months ended September 30, 2022 was $2.2 million, primarily due to the payment of $2.4 million in contingent consideration due to regulatory approval of the ALLY System offset from proceeds from the sale of common stock under the employee stock purchase plan.

~~Net cash provided by financing activities for the nine months ended September 30, 2021 was $0.2 million, primarily due to proceeds from the sale of common stock under the employee stock purchase plan.~~

The 2020 Incentive Award Plan provides for the grant of stock options, restricted stock, restricted stock unit awards and other stock-based awards to recipients. During 2021, we granted stock options to directors, employees, and non-employees. During the ~~nine~~three months ended ~~September 30, 2022,~~March 31, 2023, we granted stock options and restricted stock units to employees and non-employees. We intend to grant stock options and restricted stock units as part of our overall compensation package to directors and employees.

At ~~September 30, 2022,~~March 31, 2023, there was approximately ~~$4.0~~$1.6 million, ~~$0.4~~$1.3 million, and ~~$3.2~~$2.9 million of total unrecognized compensation expense related to restricted stock awards, restricted stock units and stock options, respectively, which is expected to be recognized over a weighted-average period of ~~0.9~~0.4 years, ~~2.5~~2.0 years and ~~2.7~~2.8 years, respectively. Total unrecognized stock-based compensation expense is expected to be amortized as follows:

~~As of September 30, 2022, we did not have any off-balance sheet arrangements, as defined under Regulation S-K, Item 303(a)(4)(ii).~~

The preparation of financial statements and related disclosures in conformity with U.S. Generally Accepted Accounting Principles, or GAAP, and the discussion and analysis of our financial condition and operating results require our management to make judgments, assumptions and estimates that affect the amounts reported in our condensed financial statements. Management bases its estimates on historical experience and on various other assumptions it believes to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities. The impact of accounting estimates and judgments on our financial condition and results of operations due to the COVID-19 pandemic and global macroeconomic conditions originating during the pandemic has introduced additional uncertainties. We evaluate our estimates and assumptions on an ongoing basis. Actual results may differ from these estimates and such differences may be material.

There have been no significant and material changes in our critical accounting estimates during the three months ended ~~September 30, 2022,~~March 31, 2023, as compared to those disclosed in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included in the Annual Report.

See Note 2, Summary of Significant Accounting Policies, to our unaudited condensed financial statements included in this Quarterly Report for a discussion of recently adopted accounting pronouncements and recently issued accounting pronouncements not yet adopted as of ~~September 30, 2022.~~March 31, 2023.

We had cash and cash equivalents of ~~$19.3~~$8.0 million as of ~~September 30, 2022.~~March 31, 2023. Our cash and cash equivalents are held in deposit demand accounts at a large financial ~~institution~~institutions in amounts in excess of the Federal Deposit Insurance Corporation, or FDIC, insurance coverage limit of $250,000 per depositor, per FDIC-insured bank, per ownership category. Management has reviewed the financial ~~statements~~situation and government guarantees to depositors, if applicable, of ~~this institution~~the financial institutions and believe ~~it has sufficient assets and liquidity~~there to ~~conduct its operations in the ordinary course of business with~~be little or no credit risk to us.A hypothetical 10% change in interest rates would not have had a material impact on the value of our cash and cash equivalents as of ~~September 30, 2022.~~March 31, 2023.

Financial instruments that potentially subject us to concentrations of credit risk principally consist of accounts receivable and notes receivable. We limit our credit risk with respect to accounts receivable and notes receivable by performing credit evaluations when deemed necessary, but we do not require collateral to secure amounts owed to us by our customers. We do have the ability to disable the system’s ability to operate for lack of payment and, in the case of notes receivable, repossess the system if scheduled payments lapse. As of ~~September 30, 2022, three customers~~March 31, 2023, one customer accounted for ~~10%, 12% and 15%~~13% of our accounts receivable, net.

We currently have limited exposure to foreign currency fluctuations and do not engage in any hedging activities as part of our normal course of business.

In designing and evaluating our disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives. In addition, the design of disclosure controls and procedures must reflect the fact that there are resource constraints and that management is required to apply judgment in evaluating the benefits of possible controls and procedures relative to their costs.

The Company’s management has evaluated, with the participation of the chief executive officer and the chief financial officer, the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) as of the end of the period covered by this Quarterly Report. Based on this evaluation, the chief executive officer and chief financial officer concluded that the Company’s disclosure controls and procedures were effective at the reasonable assurance level as of ~~September 30, 2022.~~March 31, 2023.

There were no changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the three months ended ~~September 30, 2022~~March 31, 2023 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

From time to time we may be involved in claims and proceedings arising in the course of our business. The outcome of any such claims or proceedings, regardless of the merits, is inherently uncertain. We are not party to any material legal proceedings.

Investing in our common stock involves a high degree of risk. You should carefully consider the risks described below, as well as the other information in this Quarterly Report, including our unaudited condensed financial statements and the related notes included elsewhere in this Quarterly Report, as well as our other public filings with the SEC, before deciding to invest in our common stock. If any of the following risks are realized, our business, financial condition, results of operations and prospects, as well as the price of our common stock, could be materially and adversely affected.

Our results have been in the past, and could be in the future, adversely affected by economic uncertainty or deteriorations in economic conditions.

Global economic uncertainty, including due to factors such as increased inflation and rising interest rates, have contributed to our business and operational performance. If economic uncertainty continues or increases or if economic conditions deteriorate, including due to the ongoing and legacy effects of the COVID-19 pandemic, these conditions may have a material adverse impact on our revenue, profit margins, cash flow and liquidity in the future. In particular, our business is impacted by inflation, such as the recent inflationary pressures related to global supply chain disruptions that have increased the cost of certain raw materials, labor and transportation used in our business. These broad-based inflationary impacts have negatively impacted our financial condition, results of operations and cash flows since 2020, and we expect these inflationary impacts to continue for the foreseeable future. A high rate of inflation in the future may have an adverse effect on our ability to maintain and increase our gross margin or decrease our operating expenses as a percentage of our revenues if our selling prices of our products do not increase as much or more than our increase in costs.

We expect to incur operating losses for the ~~foreseeable~~near-term future and we cannot assure you that we will be able to generate sufficient revenue to achieve or sustain profitability.

For the years ended December 31, ~~2020 and 2021, we had net losses of $19.8 million and $19.6 million, respectively, and for the nine months ended September 30,~~ 2021 and 2022, we had net losses of ~~$15.7~~$19.6 million and ~~$17.4~~$19.9 million, respectively, and for the three months ended March 31, 2022 and 2023, we had net losses of $6.7 million and $4.3 million, respectively. As of ~~September 30, 2022,~~March 31, 2023, we had an accumulated deficit of ~~$95.0~~$101.8 million. We expect to continue to incur losses for the ~~foreseeable~~near-term future as a result of building our commercial and clinical infrastructure, pursuing further FDA and other regulatory body clearance or certification of and our further commercial launch of our proprietary, next generation ~~integrated~~ cataract treatment system, known as our ALLY System, and ~~invest~~investing in research and development. In addition, as a public company, we will incur significant legal, accounting and other expenses. We cannot make assurances that we will ever generate sufficient revenue from our operations to achieve profitability, and even if we achieve profitability, we cannot be sure that we will remain profitable for any substantial period of time. Our failure to achieve or maintain profitability could negatively affect the value of our securities and our ability to raise capital and continue operations.

We have historically derived our revenue ~~principally~~ from the sale or lease of our LENSAR Laser ~~System~~ and ALLY Systems as well as the associated procedure licenses and sale of consumables used in each procedure involving our ~~LENSAR Laser System.~~systems. The future commercial success of our ALLY System will depend upon receipt of additional regulatory clearances or certifications and our ability to maintain and grow significant market acceptance for it.

We have historically derived our revenue ~~principally~~ from the sale or lease of our LENSAR Laser ~~System~~and ALLY Systems and the associated procedure licenses and consumables used in each procedure involving our ~~LENSAR Laser System,~~systems, and expect that this will account for a majority of our revenue in the foreseeable ~~future until we are able to fully commercialize our ALLY System.~~future. Accordingly, our ability to increase revenue is highly dependent on our ability to market and sell or lease our ALLY System and market the associated consumables. ~~We believe~~In 2022, ~~is a transition year for the Company, as~~ we ~~have~~ transitioned from manufacturing and selling our LENSAR Laser System ~~and are focusing~~to focus on our ALLY System. ~~We also~~In September 2022, we submitted the ALLY System for certification in the European Union, or EU, and intend to submit additional marketing or certification applications outside the United States in an effort to commercialize the ALLY System in additional countries and operating regions. Our growth, market presence and ability to sell the ALLY System will depend on whether the ALLY System receives regulatory clearance or certifications in ~~that region,~~other regions outside the United States and the timing of these clearance or certifications, among other factors. In addition, ~~based on inventory of our LENSAR Laser System,~~ our future revenue and cash flows will depend on, among other factors, our installed base of ~~systems and the timing of and applicable clearances or certifications for our ALLY System.~~systems.

Our ability to maintain our market share, execute our growth strategy, achieve commercial success and become profitable will depend upon the adoption and continued acceptance of our LENSAR Laser System and ALLY System by surgeons, hospital outpatient surgical facilities, in-office surgical suites and ambulatory surgery centers, or ASCs. Our systems are currently used in advanced cataract procedures for which surgeon reimbursement continues to decline and patients pay a significant portion of the cost of the procedure. We cannot predict the extent to which patients will continue to seek out these types of procedures. Further, we cannot predict if cataract surgeons will continue to use our LENSAR Laser System or how quickly cataract surgeons will accept the ALLY System, or any planned or future products we introduce, and, if accepted, how frequently any such products will be used. Our current products may not maintain, and our ALLY System or any planned or future products we may develop or market may never gain, broad market acceptance among

cataract surgeons and the medical community for the procedures in which they are designed to be used. Our ability to maintain and increase market acceptance of our products depends on a number of factors, including:

Failure to maintain or increase market acceptance would limit our ability to generate revenue and would have a material adverse effect on our business, financial condition and results of operations.

Our growth depends on our ability to gain regulatory clearances and certifications, as well as our ability to meet production goals for our ALLY System.

~~We are developing our ALLY System as a dual-function device that has the potential to perform both phacoemulsification and laser-assisted surgery.~~ The ALLY System, which has received clearance from the FDA, enables cataract surgeons to complete the femtosecond-laser-assisted cataract surgery, or FLACS, procedure seamlessly in a single, sterile environment. This clearance is the first stage of a planned, ~~two step~~two-step commercial release strategy. The ALLY System is ~~expected~~now available to ~~be made widely available to~~all U.S. cataract surgeons and has also received regulatory clearance in ~~2023.~~India. In addition, we submitted the ALLY System for certification in the European Union, or EU, in September 2022 and

intend to submit additional marketing or certification applications outside the United States in an effort to commercialize the ALLY System in additional countries and operating regions. Our ability to place systems in 2022 ~~has been~~was limited by supply chain constraints that ~~have~~ delayed the delivery of certain ALLY System raw materials and the completion and testing of ALLY Systems for use as launch-stock inventory. If we continue to experience supply chain constraints, we may be unable to deliver ALLY Systems as planned.

~~Further, we are relying on a third party to manufacture the phacoemulsification component of our ALLY System, and do not currently possess the internal resources or know-how to do so.~~ As the second stage of the ~~commercial release~~ strategy, we plan to seek an additional 510(k) clearance for the phacoemulsification features of the ALLY System in a subsequent 510(k) submission subject to a third party’s phacoemulsification device receiving clearance and serving as ~~the~~a predicate device. As this device will be considered the predicate device for purposes of evaluating the ALLY System’s phacoemulsification functionality, we are unable to submit ~~our second~~a 510(k) submission seeking clearance of the phacoemulsification features within the ALLY System until the predicate device receives FDA

clearance. Further, we are relying on a third party to manufacture and obtain clearance on the phacoemulsification component of our ALLY System, and do not currently possess the internal resources or know-how to do so without their assistance. Accordingly, we ~~have delivered~~are delivering the ALLY System to surgeons ~~in the initial launch~~ with the phacoemulsification features ~~remaining~~ disabled and/or ~~removed and expect this to continue.~~removed.

~~Further, if~~If the third party is unable to obtain clearance of its phacoemulsification device, we may not be able to obtain FDA clearance on the phacoemulsification features of our ALLY System in a timely manner, if at all. Accordingly, if we are unable to get the phacoemulsification feature of the ALLY System cleared by the FDA and authorized or certified by other regulatory bodies, it could further impact our future revenue and cash flows. Any additional adverse developments with our 510(k) submission or that of our third-party supplier, including that ~~third-party’s~~third party’s failure to obtain 510(k) clearance for their phacoemulsification device, for which the phacoemulsification component of our ALLY System is reliant as a predicate, could in turn further negatively impact our ability to obtain 510(k) clearance for the phacoemulsification features of our ALLY System or, even if clearance is obtained, the timing of any commercialization of both the femtosecond laser and phacoemulsification features within our ALLY System.

While we have engaged in market research to evaluate the interest in a dual-function device, the results of that research are based on a small population of cataract surgeons and may not be indicative of actual market interest. In addition, the success of our ALLY System or any other new product offering or product enhancements we pursue will depend on several factors, including our ability to:

If we are not successful in expanding our product offering, our ability to increase our revenue may be impaired, which could have a material adverse effect on our business, financial condition and results of operations.

~~COVID-19~~Global health developments and ~~actions taken to control the spread of~~economic uncertainty resulting from COVID-19 have ~~impeded global supply chains~~adversely impacted, and ~~have had an adverse~~may continue to adversely impact, on our business, results of operations, cash flows and ~~we expect this situation to continue, and potentially worsen.~~financial position.

The ~~outbreak of a novel coronavirus, or~~ COVID-19 ~~has severely impacted~~pandemic, and related global ~~economic activity and caused significant volatility and negative pressure in financial markets. COVID-19 and actions taken to control the spread of COVID-19 have~~macroeconomic conditions, has significantly impacted our business, and ~~we expect they may continue to do so.~~could in the future have a material adverse impact. For example, if we or our commercial partners again experience prolonged shutdowns or business disruptions due to “shelter-in-place” orders, quarantines, suspension or restriction of elective surgeries and various business operations

or similar orders or restrictions to control the spread of COVID-19 or other health crises by restricting non-essential activities, including the suspension or restriction of elective surgeries and various business operations resulted in a significant decrease in the number of and demand for non-essential or elective medical procedures, including cataract surgeries, during 2020 and early 2021. We cannot provide assurance procedure volume levels will grow if additional business suspensions or restrictions are mandated. The respective commercial teams of certain of the third parties that act as our distributors in international markets have chosen or have been forced to take similar action, and those or other distributors may choose or be forced to take similar action in the future. In addition, “shelter-in-place” orders, quarantines, or similar orders or restrictions may increase our cybersecurity risk, create data accessibility concerns and make us more susceptible to communication disruptions, any of which could adversely impact our business operations or delay necessary interactions with local, federal and foreign regulators, notified bodies, ethics committees, manufacturing sites, research or clinical trial sites and other important agencies and contractors. The suspension of non-essential medical services during 2020 significantly impacted our revenues and cash flows and significantly impacted our ability to ~~operate~~conduct our ~~commercial operations. Furthermore, these~~business could be materially and adversely impacted, and our business, liquidity and financial results would be adversely affected. Adverse developments ~~including their long-term impact on our suppliers,~~originating during the COVID-19 pandemic have adversely affected, and may continue to adversely affect, the availability of parts and components needed for our systems, ~~or,~~

which, if such conditions persist or worsen, may have a material adverse impact on the commercial success of the ALLY System. ~~Furthermore,~~In particular, we ~~may continue to face~~have faced increased costs associated with supply chain disruptions, inflationary pressures and resulting price increases, ~~resulting from the COVID-19 pandemic.~~and expect these trends to continue. For example, we expect our contractual obligations to increase due to supply chain issues that have necessitated us to enter into longer-term and more expensive per unit contracts to build and source inventory to satisfy the expected commercial demand for the ALLY System. If these costs are passed along to customers through an increase to the overall cost of the ALLY System, customer demand may be adversely impacted. In addition, the COVID-19 pandemic has resulted in, and may continue to result in, historically high unemployment rates, which typically result in lower rates of private health insurance. Even if procedures in which our systems are used are covered or reimbursable by third-party payors, patients may not have adequate insurance coverage or other discretionary income to pay for a procedure in which one of our systems is used, which would in turn adversely impact our future revenue and results of operations. Furthermore, some industry meetings and conferences have moved to a virtual format, which severely limits our ability to meet and interact with surgeons and staff, display our technology, conduct user group meetings, and network as a means to market and sell our product.

The ~~continued spread of~~ COVID-19 ~~has~~pandemic also led to extreme disruption and volatility in the global capital markets, which ~~may increase~~has increased the cost of, and adversely ~~impact~~impacted access to, capital and ~~increases~~increased economic ~~uncertainty. While we expect COVID-19 to continue to impact~~uncertainty, and could adversely affect our ~~business, operations~~liquidity and ~~revenue growth, given~~capital resources in the ~~rapid and evolving nature of the virus and the uncertainty about its impact on society and the global economy, we~~future. We cannot predict with certainty the extent to which itglobal economic uncertainty will ~~affect~~impact our business, financial condition and results of operations, particularly if ~~these impacts~~the factors contributing to this uncertainty persist or worsen over an extended period of time. Furthermore, any ~~similar~~new pandemic, epidemic or outbreak of an infectious disease in the markets in which we operate or in which we sell or lease our products ~~may adversely affect~~could have similar negative effects on macroeconomic conditions generally and on our ~~business.~~business, financial condition and results of operations.

COVID-19 disruptions adversely impacting our business and financial results may also have the effect of heightening many of the other risks described in this “Risk Factors” section, including risks relating to changes in global economic conditions; consumer demand; our ability to maintain and grow significant market acceptance; our ability to enhance our systems; our ability to grow our marketing team; patients’ and surgeons’ willingness and ability to pay for an advanced cataract procedure over a standard cataract procedure; our future capital needs; disruption in the long-term supply and manufacturing of our products by suppliers; increased credit risks associated with our customers; and regulatory restrictions and clearances.

Patients may not be willing to pay for the price difference between a standard cataract procedure and an advanced cataract procedure in which a laser system such as ours is used, an increment which is typically not covered by Medicare, private insurance or other third-party payors.

Payment for a standard cataract procedure is typically covered by Medicare, private insurance or other third-party payors. However, a cataract patient seeking a greater and more versatile visual outcome may desire an advanced cataract procedure involving a laser system such as ours. The patient is typically responsible for the additional costs associated with the use of these premium technologies in the physician’s practice, hospital outpatient surgical facilities, in-office surgical suites and ambulatory surgery centers. Due to this additional cost, patients may not elect to have such a procedure and our business may not grow as anticipated. Our future success depends in part upon patients achieving better visual outcomes from procedures using our LENSAR Laser System or ALLY System, or procedures involving similar laser systems that meets their expectations. If patients are not adequately satisfied with the results of such procedures, they or their surgeons may be less willing to recommend these procedures to other patients.

Additionally, weak or uncertain economic conditions may cause individuals to be less willing to pay for advanced cataract procedures. Although we anticipate use of our ALLY System in certain aspects of the standard cataract procedure will be covered by or reimbursable through government or other third-party payors, our current LENSAR Laser System procedures are not covered by or reimbursable through government or other third-party payors. A decline in economic conditions in the United States or in international markets could result in a decline in demand for the procedures in which our systems are used and could have a material adverse effect on our business, financial condition and results of operations.

If we are not able to effectively grow our U.S. sales and marketing organization or maintain or grow an effective network of international distributors, our business prospects, results of operations and financial condition could be adversely affected.

In order to generate future sales growth within the United States, we will need to expand the size and geographic scope of our U.S. direct sales organization. Accordingly, our future success will depend largely on our ability to train, retain and motivate skilled regional sales managers and direct sales representatives with significant technical knowledge of our systems. Because of the competition for their services, we may not be able to retain such representatives on favorable or commercially reasonable terms, if at all. If we are unable to grow our global sales and marketing organization within the United States, we may not be able to increase our revenue, which would adversely affect our business, financial condition and results of operations.

Additionally, we rely exclusively on a network of independent distributors to generate sales and leases of our LENSAR Laser System and ALLY System as well as purchases of our consumables and licensed applications outside of the United States. ~~As of September 30, 2022,~~For the three ~~customers~~months ended March 31, 2023, one customer accounted for ~~10%, 12% and 15%~~13% of our ~~accounts receivable, net.~~revenue. This customer concentration exposes us to a material adverse effect if any of these significant distributors were to significantly reduce purchases for any reason or favor competitors or new market

~~market~~ participants. If a dispute arises with a distributor or if a distributor is terminated by us or goes out of business, it may take time to locate an alternative distributor, to seek appropriate regulatory approvals and to train new personnel to market our LENSAR Laser System, and our ALLY System upon receiving regulatory clearance in the applicable region, as well as our ability to sell those systems in the region formerly serviced by such terminated distributor could be harmed. In addition, our international distributors may be unable to successfully market and sell our products and may not devote sufficient time and resources to support the marketing, sales, education and training efforts that we believe are necessary to enable the products to develop, achieve or sustain market acceptance. Any of these factors could reduce our revenues from affected markets, increase our costs in those markets or damage our reputation. In addition, if an independent distributor were to depart and be retained by one of our competitors, we may be unable to prevent that distributor from helping competitors solicit business from our existing customers, which could further adversely affect us. As a result of our reliance on third-party distributors, we may be subject to disruptions and increased costs due to factors beyond our control, including labor strikes, third-party error and other issues. If the services of any of these third-party distributors become unsatisfactory, we may experience delays in meeting our customers’ demands and we may be unable to find a suitable replacement on a timely basis or on commercially reasonable terms. Any failure to deliver products in a timely manner may damage our reputation and could cause us to lose potential customers.

Our future capital needs are uncertain and we may need to raise additional funds in the future, and such funds may not be available on acceptable terms or at all.

We expect our revenues and expenses to increase in connection with our on-going activities, particularly as we continue to execute on our growth strategy, including expansion of our sales and customer support teams. The primary factors determining our cash needs are the funding of operations, which we expect to continue to expand as the business grows, and enhancing our product offerings through the research and development, further regulatory clearances and launch of the ALLY System. Our future liquidity needs, and ability to address those needs, will largely be determined by the success of our commercial efforts and those of our distributors; the timing, scope and magnitude of our commercial and development activities; and the timing of further regulatory clearance or certification of our ALLY System. We have also experienced negative effects on our capital requirements from supply chain interruptions, and we expect that supply chain disruptions will negatively affect our capital requirements and the availability of funds to finance those ~~requirements.~~requirements in the future. In addition, market conditions impacting financial institutions could impact our ability to access some or all of our cash, cash equivalents and marketable securities, and we may be unable to obtain alternative funding when and as needed and on acceptable terms, if at all.

As of the date of this Quarterly Report, we expect our current cash and cash equivalents, together with cash generated from the future sale and lease of our products, to be sufficient to operate our business ~~into 2024. However, if~~for at least one year from the date of issuance of these ~~amounts are insufficient to satisfy our liquidity requirements, we~~condensed financial statements. We may seek additional funds from public ~~and~~or private stock offerings, borrowings under credit facilities or other sources that we may not be able to maintain or obtain on acceptable or commercially reasonable terms, if at all. Our capital requirements will depend on many factors, including, but not limited to:

Such capital may not be available on favorable terms, or at all. The existence of inflation in the economy has resulted in, and may continue to result in, higher interest rates and capital costs, which may impact our ability to obtain additional capital on favorable terms. Furthermore, if we issue equity securities to raise additional capital, our existing stockholders may experience dilution, and the new equity securities may have rights, preferences and privileges senior to those of our existing stockholders. Debt financing, if available, may involve covenants restricting our operations or our ability to incur additional debt. Any debt financing or additional equity that we raise may contain terms that are not favorable to us or our stockholders. In addition, if we raise additional capital through collaboration, licensing or other similar arrangements, it may be necessary to relinquish valuable rights to our products, potential products or proprietary technologies, or grant licenses on terms that are not favorable to us. If we cannot raise capital on acceptable terms, we may not be able to develop or enhance our products, execute our business plan, take advantage of future opportunities or respond to competitive pressures, changes in our supplier relationships or unanticipated customer requirements. Any of these events could adversely affect our ability to achieve our business and financial goals or to achieve or maintain profitability and could have a material adverse effect on our business, financial condition and results of operations.

If the supply or manufacture of our systems or other products associated with the systems is materially disrupted, including by supply chain shortages and price increases, it may adversely affect our ability to manufacture products and could negatively affect our operating results.

We manufacture our systems and provide the electronic license applications at our corporate headquarters in Orlando, Florida. This is also the location where we currently conduct substantially all of our research and development activities, customer and technical support, and management and administrative functions. If our facility suffers a crippling event, or a force majeure event such as an earthquake, hurricane, fire, flood or temporary shutdown due to a pandemic, epidemic or infectious disease, this could materially impact our ability to operate.

We purchase custom and off-the-shelf components from a number of suppliers and subject them to stringent quality specifications and processes. Some of the components necessary for the assembly of our systems and associated consumables are currently provided by single-sourced suppliers (the only approved supply source for us among other sources). We are also relying on a third party to manufacture the phacoemulsification component of the ALLY System. If one or more of our suppliers cease to provide us with sufficient quantities of materials in a timely manner or on terms acceptable to us, we would have to seek alternative sources of supply. Because of factors such as the proprietary nature of our products, our quality control standards and regulatory requirements, we may experience delays in engaging additional or replacement suppliers for certain components. There may also be disruptions outside our control in the availability and pricing of various component parts needed for our ALLY System.

In particular, a global semiconductor supply shortage ~~resulting from the COVID-19 pandemic~~has had, and is ~~having~~continuing to have, wide-ranging effects across multiple ~~industries,~~industries. According to certain market reports, both China and weTaiwan are ~~seeing~~leading manufacturers of the world’s semiconductor supply. Conflict between China and Taiwan might lead to trade sanctions, technology disputes, or supply chain disruptions, which could, in particular, affect the semiconductor industry. If this were to occur, our ability to source an adequate supply of semiconductors would be further reduced, which would adversely affect our business. In addition, any further conflict between China and Taiwan could harm our operations globally, including the operations of our customers and suppliers.

We have seen significant disruptions in the supply of, timing of delivery of and fluctuations in pricing for various component parts needed for our ~~ALLY System,~~products, including the integrated circuits used in ~~the ALLY System.~~our systems, and expect these trends to continue. Our efforts to maintain an adequate supply of inventory may not be sufficient and we may be unable to source the necessary component parts on commercially acceptable terms to reflect in the price of our system. The long-term loss of these suppliers, or their long-term inability to provide us with an adequate supply of components or products, could potentially cause delay in the manufacture of our products, thereby impairing

our ability to meet the demand of our customers and causing significant harm to our business. If it becomes necessary to identify and qualify a suitable second source to replace one of our key suppliers, that replacement supplier would not have access to our previous supplier’s proprietary processes and would therefore be required to develop its own, which could also result in delay. Any disruption of this nature or increased expense could harm our commercialization efforts and could have a material adverse effect on our business, financial condition and results of operations. If these supply chain shortages and disruptions continue or worsen, there is no guarantee that the Company will be able to meet customer demand for the ALLY System. In addition, pricing increases in component parts for our systems resulting from ~~the COVID-19 pandemic~~inflationary pressures and ~~related inflationary pressures~~other macroeconomic conditions may necessitate an increase in the overall cost to customers, which in turn may have an adverse impact on customer demand.

We and some of our suppliers and contract facilities are required to comply with regulatory requirements of the FDA (and other regulatory authorities). In particular, the FDA’s Quality System Regulation, or QSR, which includes FDA’s current Good Manufacturing Practice requirements, or cGMPs, covers the procedures and documentation of the design, testing, production, control, quality assurance, inspection, complaint handling, recordkeeping, management review, labeling, packaging, sterilization, storage and shipping of our device products. The FDA audits compliance with these regulatory requirements through periodic announced and unannounced inspections of manufacturing and other facilities. If our manufacturing facilities or those of any of our suppliers or contract facilities are found to be in violation of applicable laws and regulations, the FDA could take enforcement action. Similar requirements must be complied with in foreign countries and foreign regulatory authorities could also take enforcement action. Additionally, in the event we

must obtain a replacement supplier or contract facility, it may be difficult for us to identify and qualify a supplier or contract facility that complies with QSR and cGMPs, which would adversely impact our operations.

~~Inflation has adversely affected, and may in the future adversely affect, our business, results of operations and financial condition.~~

Our business is impacted by inflation, such as the recent inflationary pressures related to global supply chain disruptions that have increased the cost of certain raw materials, labor and transportation used in our business. These broad-based inflationary impacts have negatively impacted our financial condition, results of operations and cash flows since 2020, and we expect these inflationary impacts to continue for the foreseeable future. A high rate of inflation in the future may have an adverse effect on our ability to maintain and increase our gross margin or decrease our operating expenses as a percentage of our revenues if our selling prices of our products do not increase as much or more than our increase in costs.

We currently compete, and ~~may~~expect to compete in the future, against other companies, some of which have longer operating histories, more established products or greater resources than we do.

Our industry is global, highly competitive and subject to rapid and profound technological, market and product-related changes. We face significant competition from large multinational medical device companies, as well as smaller, emerging players focused on product innovation.

Our primary competitors in providing surgical solutions for cataract patients are Alcon Inc.; Bausch + Lomb ~~a division of Bausch Health Companies Inc.;~~Corporation; Johnson & Johnson; Carl Zeiss AG; Zeimer; and KERANOVA S.A. These competitors are focused on bringing new technologies to market and acquiring products and technologies that directly compete with our products or have potential product advantages that could render our products obsolete or noncompetitive.

Many of our current and potential competitors are large publicly traded companies or divisions of publicly-traded companies and have several competitive advantages, including:

In addition, many of our competitors have their own intraocular lens, or IOLs, while we do not, which could put us at a competitive disadvantage. If we are unable to compete effectively in this environment, it could adversely affect our business.

To successfully market, sell and lease our products in markets outside of the United States, we must address many international business risks with which we have limited experience.

We have historically sold and leased a significant portion of our LENSAR Laser Systems outside of the United States through a network of independent distributors and intend to increase our international presence in Germany, China and South Korea, as well as other international ~~markets.~~markets, including through sales and leases of our ALLY System once regulatory clearance in these regions has been obtained. Our international business operations are subject to a number of risks, including:

~~If one~~For example, the war between Russia and Ukraine has not had a direct material impact on our revenue to date; however, that could change depending on the magnitude of the conflict and the imposition of additional sanctions by the U.S. and other countries or ~~more~~the spread of the conflict to surrounding areas. Further, while we are not directly exposed to economic conditions in Russia or Ukraine, the conflict has had a substantial impact on global supply chains and may be a contributing factor to the supply chain shortages we are experiencing.

These risks and uncertainties could negatively impact our ability to successfully market, sell and lease our products in markets outside of the United States. Furthermore, our ability to deal with these issues could be affected by applicable U.S. laws. Any such risks ~~are realized, this~~ could have ~~a material~~an adverse ~~effect~~impact on our business, financial condition, ~~and~~ results of ~~operations.~~operations, cash flows, or reputation.

We are exposed to the credit risk of some of our customers, which could result in material losses.

Customers may lease our ~~LENSAR Laser System~~systems or finance the ~~laser~~system through the product utilization, and we believe there has been an increase in demand for these types of customer leasing in recent years, especially in the United States. We may experience loss from a customer’s failure to make payments according to the contractual lease terms or some other material decrease in the practice revenues and surgical procedure volume. Our exposure to the credit risks relating to our lease financing arrangements may increase if our customers are adversely affected by changes in healthcare laws, economic pressures or uncertainty, or other customer-specific factors. In addition, our credit risk may be highly concentrated, as we rely exclusively on a network of independent distributors to generate sales outside of the United States. Further, ongoing consolidation among distributors, retailers and healthcare provider organizations could increase the concentration of credit risk. The factors affecting our customers’ ability to make timely payments according to the contractual lease terms are out of our control, and as a result, exposes us to additional risks that may materially and adversely affect our business and results of operations. The occurrence of any such factors affecting our customers may cause delays in payments or, in some cases, defaults on payment obligations, which could result in material losses.

The programs we have designed to monitor and mitigate the associated risk may not be successful. There can be no assurance that such programs will be effective in reducing credit risks relating to these lease financing arrangements. If the level of credit losses we experience in the future exceed our expectations, such losses could have a material adverse effect on our business, financial condition and results of operations or adversely affect our ability to sell such assets as part of our monetization strategy.

We may be unable to accurately forecast customer demand and our inventory levels.

We generally do not maintain large volumes of finished goods and anticipating demand for our products may be challenging as cataract surgeon demand and adoption rates can be unpredictable. In addition, as use of our LENSAR Laser System and ALLY System is adopted by more cataract surgeons, we anticipate greater fluctuations in demand for our products, which makes demand forecasting more difficult. Our forecasts are based on management’s judgment and assumptions, each of which may introduce error into our estimates. If we underestimate customer demand or if insufficient manufacturing capacity is available, we would miss revenue opportunities and potentially lose market share and damage our customer relationships. In connection with the commercial launch of the ALLY System, we ~~are modifying~~have modified our manufacturing operations from producing the LENSAR Laser Systems to the ALLY System. We could underestimate the worldwide demand for the ALLY System and be unable to fulfill customer requests. Conversely, if we overestimate customer demand, our excess or obsolete inventory may increase significantly, which would reduce our gross margin and adversely affect our financial results.

Failure to secure adequate coverage or reimbursement by government or other third-party payors for certain procedures using our ALLY Adaptive Cataract Treatment System or our other future products, or changes in current coverage or reimbursement, could materially impact our revenue and future growth.

Adequate coverage and reimbursement from third-party payors, including government programs such as Medicare and Medicaid, private insurance plans and managed care programs, for certain procedures (e.g., phacoemulsification) using our ALLY System or other products we may develop in the future, if approved, is central to the acceptance and adoption of these products. Hospitals, healthcare

facilities, physicians and other healthcare providers that may purchase and use our ALLY System generally rely on third-party payors to pay for a part of the costs and fees associated with certain procedures using our ALLY System. If third-party payors reduce their levels of payment, if our costs of production increase faster than increases in reimbursement levels or if third-party payors deny reimbursement for procedures using our ALLY System, our ALLY System may not be adopted or accepted by hospitals, healthcare facilities, physicians or other healthcare providers and the prices paid for a procedure using our ALLY System may decline, which could have a material adverse effect on our business, financial condition or results of operations.

Physicians are reimbursed separately for their professional time and effort to perform a cataract procedure that is covered by third-party payors. Such party payors regularly update reimbursement amounts and also from time to time revise the methodologies used to determine reimbursement amounts. This includes routine updates to payments to physicians, hospitals and ambulatory surgery centers for procedures during which our ALLY System would be used. These updates could directly impact the demand for our future products. For example, the Medicare Access and CHIP Reauthorization Act of 2015, or MACRA, provided for a 0.5% annual increase in payment rates under the Medicare Physician Fee Schedule, or PFS, through 2019, but no annual update from 2020 through 2025. MACRA also introduced a Quality Payment Program for Medicare physicians, nurses and other “eligible clinicians” (as defined in MACRA) that adjusts overall reimbursement under the PFS based on certain performance categories. While MACRA applies only to Medicare reimbursement, Medicaid and private payors often follow Medicare payment limitations in setting their own reimbursement rates, and any reduction in Medicare reimbursement may result in a similar reduction in payments from private payors, which may result in reduced demand for our ALLY System or any other products we may develop in the future. However, there is no uniform policy of coverage and reimbursement among payors in the United States. Therefore, coverage and reimbursement for procedures can differ significantly from payor to payor. Many private payors require extensive documentation of a multi-step diagnosis before authorizing procedures using our products. Some private payors may apply their own coverage policies and criteria inconsistently, and physicians and other healthcare providers may not be able to receive approval and reimbursement for certain procedures using our ALLY System consistently. Any perception by physicians and other healthcare providers that the reimbursement for procedures using our ALLY System or other future products is inadequate to compensate them for the work required, including diagnosis, documentation, obtaining third-party payor approval for the procedure and other burdens on their office staff or that they may not be reimbursed at all for the procedures using our ALLY System or other future products, may negatively affect the adoption and use of our ALLY System or other future products and technologies, and the prices paid for such products may decline.

The healthcare industry in the United States, and in our other operating regions, has experienced a trend toward cost containment as government and private insurers seek to control healthcare costs. Third-party payors are imposing lower payment rates and negotiating reduced contract rates with hospitals, other healthcare facilities, surgeons and other healthcare providers and being increasingly selective about the products, technologies and procedures they chose to cover and provide reimbursement for. Third-party payors may adopt policies in the future restricting access to products and technologies like ours or the procedures performed using such products. Therefore, we cannot be certain that any procedures performed with our ALLY System or other future products will be covered and reimbursed. There can be no guarantee that should we introduce new products and technologies, third-party payors will provide adequate coverage and reimbursement for those products or the procedures in which they are used. If third-party payors do not provide adequate coverage or reimbursement for such products, then our sales may be limited to circumstances where our products and procedures using our products are being largely or entirely self-paid by patients, as is currently the case with procedures using our ~~current LENSAR Laser System.~~systems.

Additionally, market acceptance of our products and technologies in foreign markets may depend, in part, upon the availability of coverage and reimbursement within prevailing healthcare payment systems. Reimbursement and healthcare payment systems in international markets vary significantly by country and include both government-sponsored healthcare and private insurance. In Europe, reimbursement is entirely regulated at member state level and varies significantly between countries, and member states are facing increased pressure to limit public healthcare spending. We may not obtain additional international coverage and reimbursement approvals in a timely manner, if at all. Our failure to receive such approvals would negatively impact future market acceptance of our ALLY System or any of other products we may develop in the future in the international markets in which those approvals are sought.

We provide a limited warranty that our products are free of material defects and conform to specifications, and offer to repair, replace or refund the purchase price of defective products. As a result, we bear the risk of potential warranty claims on our products. In the event that we attempt to recover some or all of the expenses associated with a warranty claim against us from our suppliers or vendors, we may not be successful in claiming recovery under any warranty or indemnity provided to us by such suppliers or vendors and any recovery from such vendor or supplier may not be adequate. In addition, warranty claims brought by our customers related to third-party components may arise after our ability to bring corresponding warranty claims against such suppliers expires, which could result in costs to us.

Product liability suits brought against us could cause us to incur substantial liabilities, limit the selling or leasing of our existing products and interfere with commercialization of any products that we may develop.

If our product offerings are defectively designed or manufactured, contain defective materials, or are used or deployed improperly, or if someone alleges any of the foregoing, whether or not such claims are meritorious, we may become subject to substantial and costly litigation. Any product liability claims brought against us, with or without merit, could divert management’s attention from our business, be expensive to defend, result in sizable damage awards against us, damage our reputation, increase our product liability insurance rates, prevent us from securing continuing coverage, or prevent or interfere with commercialization of our products. In addition, we may not have sufficient insurance coverage for all future claims. Product liability claims brought against us in excess of our insurance coverage would likely be paid out of cash reserves, harming our financial condition and results of operations.

Our insurance policies are expensive and protect us only from some business risks, which leaves us exposed to significant uninsured liabilities.

We do not carry insurance for all categories of risk that our business may encounter. We can give no assurance that the coverage under our product liability insurance in the United States will be available or adequate to satisfy any claims. Product liability insurance is expensive and subject to significant deductibles and exclusions, and may not be available on acceptable terms, if at all. If we are unable to obtain or maintain insurance at an acceptable cost or on acceptable terms with adequate coverage or otherwise protect against potential product liability claims, we could be exposed to significant liabilities. A product liability claim, recall or other claim with respect to uninsured liabilities or for amounts in excess of insured liabilities could have a material adverse effect on our business, financial condition and results of operations. Defending a suit, regardless of its merit or eventual outcome, could be costly, could divert management’s attention from our business and might result in adverse publicity, which could result in reduced acceptance of our products in the market, product recalls or market withdrawals.

We do not carry specific hazardous waste insurance coverage, and our insurance policies generally exclude coverage for damages and fines arising from hazardous waste exposure or contamination. Accordingly, in the event of contamination or injury, we could be held liable for damages or be penalized with fines in an amount exceeding our resources, and our clinical trials or regulatory approvals and certifications could be suspended.

We also expect that operating as a public company will make it more difficult and more expensive for us to obtain and maintain director and officer liability insurance, and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. As a result, it may be more difficult for us to attract and retain qualified people to serve on our board of directors, our board committees or as executive officers. We do not know, however, if we will be able to maintain existing insurance with adequate levels of coverage. Any significant uninsured liability may require us to pay substantial amounts, which would negatively affect our business, financial condition and results of operations.

Our financial results may fluctuate significantly and may not fully reflect the underlying performance of our business.

Our quarterly and annual results of operations may vary significantly in the future, and period-to-period comparisons of our operating results may not be meaningful. Accordingly, the results of any one quarter or period should not be relied upon as an indication of future performance. Our quarterly and annual financial results may fluctuate as a result of a variety of factors, many of which are outside our

control and, as a result, may not fully reflect the underlying performance of our business. For example, we have historically experienced seasonal variations in the selling or leasing of our products and procedures involving our products, with our fourth quarter typically being the strongest and the first or third quarter being the slowest. We believe these seasonal changes are consistent across our industry. Other factors that may cause fluctuations in our quarterly and annual results include:

As a result, you should not rely on our results in any past period as an indication of future results and you should anticipate that fluctuations in our quarterly and annual operating results may continue and could generate volatility in the price of our common stock. Quarterly or annual comparisons of our financial results should not be relied upon as an indication of our future performance.

If we fail to manage our anticipated growth effectively, or are unable to increase or maintain our manufacturing capacity, we may not be able to meet customer demand for our products and our business could suffer.

We have experienced significant period-to-period growth in our business, with the exception of 2020 due to the impact of the COVID-19 pandemic on our operations, and we must continue to grow in order to meet our business and financial objectives. However, continued growth may create numerous challenges, including:

Our current and planned capacity may not be sufficient to meet our current business plans. There are uncertainties inherent in expanding our manufacturing capabilities, and we may not be able to sufficiently increase our capacity in a timely manner. For example, manufacturing and product quality issues may arise as we increase production rates at our manufacturing facility or launch new products. Also, we may not manufacture the right product mix to meet customer demand as we introduce new products. As a result, we may experience difficulties in meeting customer demand, in which case we could lose customers or be required to delay new product introductions, and demand for our products could decline. If we fail to manage any of the above challenges effectively, our business may be harmed.

If we choose to acquire new and complementary businesses, products or technologies, we may be unable to complete these acquisitions or to successfully integrate them in a cost-effective and non-disruptive manner.

Our success depends, in part, on our ability to continually enhance and broaden our product offerings in response to changing customer demands, competitive pressures and advances in technologies. Accordingly, although we have no current commitments with respect to any acquisition or investment, we may in the future pursue the acquisition of, or joint ventures relating to, complementary businesses, products or technologies instead of developing them ourselves. We do not know if we will be able to successfully complete any future acquisitions or joint ventures, or whether we will be able to successfully integrate any acquired business, product or technology or retain any key employees related thereto. Integrating any business, product or technology we acquire could be expensive and time-consuming, disrupt our ongoing business and distract our management. If we are unable to integrate any acquired businesses, products or technologies effectively, our business will be adversely affected. In addition, any amortization or charges resulting from the costs of acquisitions could increase our expenses.

Our future growth depends on our ability to retain members of our senior management and other key employees. If we are unable to retain or recruit qualified personnel for growth, our business results could suffer.

We have benefited substantially from the leadership and performance of our senior management as well as certain key employees. Our success will depend on our ability to retain our current management and key employees, and to attract and retain qualified personnel in the future. Competition for senior management and key employees in our industry is intense, and we cannot guarantee that we will be able to retain our personnel or attract new, qualified personnel, or that we will be able to do so without incurring substantial additional costs. We have begun to experience increases in compensation levels in connection with our recruitment and retention efforts, which may increase further in the future. The loss of services of certain members of our senior management or key employees could prevent or delay the implementation and completion of our strategic objectives, or divert management’s attention to seeking qualified replacements. Each member of senior management as well as our key employees may terminate employment without notice and without cause or good reason. The members of our senior management are not subject to non-competition agreements. Accordingly, the adverse effect resulting from the loss of certain members of senior management could be compounded by our inability to prevent them from competing with us.

In addition to competing for market share for our products, we also compete against our competitors for personnel, including qualified sales representatives that are necessary to grow our business. Universities and research institutions also compete with us for scientific personnel that are important to our ~~R&D~~research and development efforts. We also rely on consultants and advisors in our research, operations, clinical and commercial efforts to implement our business strategies. Our consultants and advisors may be employed by employers other than us and may have commitments under consulting or advisory contracts with other entities that may limit their availability to us. Our strategic plan requires us to continue growing our sales, marketing, clinical and operational infrastructure in order to generate, and meet, the demand for our products. If we fail to retain or attract these key personnel, we could fail to take advantage of the market for our products, adversely affecting our business, financial condition and results of operation.

We rely significantly on the use of information technology. Cybersecurity risks – any technology failures causing a material disruption to operational technology or cyber-attacks on our systems affecting our ability to protect the integrity and security of

customer and employee information – could harm our reputation and/or could disrupt our operations and negatively impact our business.

The efficient operation of our business depends on our information technology systems. We rely on our information technology systems to effectively manage sales and marketing data, accounting and financial functions, inventory management, product development tasks, clinical data, customer service and technical support functions. The future operation, success and growth of our business depends on streamlined processes made available through our uninhibited access to information systems, global communications, internet activity and other network processes.

Like most companies, despite our current security measures, our information technology systems, and those of our third-party service providers, may be vulnerable to information security breaches, acts of vandalism, computer viruses and interruption or loss of valuable business data. Stored data might be improperly accessed due to a variety of events beyond our control, including, but not limited to, natural disasters, terrorist attacks, telecommunications failures, computer viruses, hackers and other security issues. In addition, a variety of our software systems are cloud-based data management applications, hosted by third-party service providers whose security and information technology systems are subject to similar risks. We have technology security initiatives in place to mitigate our risk to these vulnerabilities, but these measures may not be adequately designed or implemented to ensure that our operations are not disrupted or that data security breaches do not occur.

Hackers and data thieves are increasingly sophisticated and operate large-scale and complex automated attacks which may remain undetected until after they occur. Any breach of our network may result in damage to our reputation, the loss of valuable business data, the misappropriation of our valuable intellectual property or trade secret information, misappropriation of personal information, key

personnel being unable to perform duties or communicate throughout the organization, significant costs for data restoration and other adverse impacts on our business. Ransomware attacks, including those from organized criminal threat actors, nation-states, and nation-state supported actors, are becoming increasingly prevalent and severe, and ~~can~~if made against us could lead to significant interruptions in our operations, loss of data and income, reputational loss, diversion of funds, and may also result in fines, litigation and unwanted media attention. Extortion payments may alleviate the negative impact of a ransomware attack, but we may be unwilling or unable to make such payments due to, for example, applicable laws or regulations prohibiting payments. Despite our existing security procedures and controls, if our network were compromised, it could give rise to unwanted media attention, materially damage our customer relationships, decrease sales and leases of our products, increase overhead costs, harm our business, reputation, results of operations, cash flows and financial condition, result in fines or litigation, and may increase the costs we incur to protect against such information security breaches, such as increased investment in technology, the costs of compliance with consumer protection laws and costs resulting from consumer fraud.

The costs of mitigating cybersecurity risks are significant and are likely to increase in the future. These costs include, but are not limited to, retaining the services of cybersecurity providers; compliance costs arising out of existing and future cybersecurity, data protection and privacy laws and regulations; and costs related to maintaining redundant networks, data backups and other damage-mitigation measures.

We do not carry cyber insurance, which may expose us to certain potential losses for damages or result in penalization with fines in an amount exceeding our resources.

Failure to comply with data privacy and security laws could have a material adverse effect on our business.

Our business processes health-related and other personal ~~data, including some data related to health.~~information. When conducting clinical studies, we face risks associated with collecting trial participants’ ~~data,~~information, especially health ~~data,~~information, in a manner consistent with applicable laws and regulations. We also face risks inherent in handling large volumes of ~~data~~information and in protecting the security of such ~~data.~~information. We could be subject to attacks on our systems by outside parties or fraudulent or inappropriate behavior by our service providers or employees. Third parties may also gain access to users’ accounts using stolen or inferred credentials, computer malware, viruses, spamming, phishing attacks or other means, and may use such access to obtain users’ personal ~~data~~information or prevent use of their accounts. Data breaches could result in a violation of applicable U.S. and international privacy, data protection and other laws, and subject us to individual or consumer class action litigation and governmental investigations and proceedings by federal, state and local regulatory entities in the United States and by international regulatory entities, resulting in exposure to material civil or criminal liability, or both. Further, our general liability insurance and corporate risk program may not cover all potential claims to which we are exposed and may not be adequate to indemnify us for all liability that may be imposed.

We may be subject to state, federal and foreign laws relating to data privacy and security in the conduct of our business, including state breach notification laws, the Health Insurance Portability and Accountability Act, or HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act of 2009, or HITECH, the EU’s General Data Protection Regulation 2016/679 and applicable national supplementing laws, or GDPR, and the California Consumer Privacy Act, or CCPA, as amended by the California

Privacy Rights Act, or CPRA. The CCPA went into effect on January 1, 2020, and creates individual privacy rights for California consumers and increases the privacy and security obligations of entities handling certain personal information. The CCPA provides for civil penalties for violations, as well as a private right of action for data breaches that has increased the likelihood of, and risks associated with data breach litigation. Further, the CPRA generally went into effect on January 1, 2023, and significantly amends the CCPA. It imposes additional data protection obligations on covered businesses, including additional consumer rights processes, limitations on data uses, new audit requirements for higher risk data, and opt outs for certain uses of sensitive data. It also creates a new California data protection agency authorized to issue substantive regulations and could result in increased privacy and information security enforcement. Additional compliance investment and potential business process changes may also be required. Similar laws have been proposed in other states and at the federal level, reflecting a trend toward more stringent privacy legislation in the United States. This legislation may add additional complexity, variation in requirements, restrictions and potential legal risk, require additional investment in resources to compliance programs, could impact strategies and availability of previously useful data, and could result in increased compliance costs and/or changes in business practices and policies.

Furthermore, the Federal Trade Commission, or FTC, and many state Attorneys General continue to enforce federal and state consumer protection laws against companies for online collection, use, dissemination and security practices that appear to be unfair or deceptive. For example, according to the FTC, failing to take appropriate steps to keep consumers’ personal information secure can constitute unfair acts or practices in or affecting commerce in violation of Section 5(a) of the Federal Trade Commission Act. The FTC expects a company’s data security measures to be reasonable and appropriate in light of the sensitivity and volume of consumer information it holds, the size and complexity of its business, and the cost of available tools to improve security and reduce vulnerabilities.

The GDPR imposes comprehensive compliance obligations regarding our processing of personal data, including a principle of accountability and the obligation to demonstrate that appropriate legal bases are in place to justify data processing activities. Additionally, we are subject to laws and regulations regarding cross-border transfers of personal data, including laws relating to transfer of personal data outside of the European Economic Area, (“EEA”). On July 16, 2020, the Court of Justice of the European Union (“CJEU”) invalidated the EU-US Privacy Shield Framework (“Privacy Shield”) under which personal data could be transferred from these jurisdictions to relevant self-certified U.S. entities. The CJEU further noted that reliance on the European Commission standard contractual clauses (a potential alternative transfer mechanism to the Privacy Shield) alone may not necessarily be sufficient in all circumstances and that transfers must be assessed on a case-by-case basis. We currently rely on the standard contractual clauses. If we cannot rely on existing mechanisms for transferring personal data from the EEA, or other jurisdictions, we could be prevented from transferring personal data of individuals in those regions; we could suffer additional costs, complaints and/or regulatory investigations or fines; we may have to stop using certain tools and vendors and make other operational changes; we will have to implement revised standard contractual clauses for existing arrangements within required time frame; and/or it could otherwise adversely affect the manner in which we provide our services and thus materially affect our operations and financial results. Failure to comply with the EU GDPR could result in penalties. Penalties for certain breaches are up to the greater of EUR 20 million or 4% of our global annual turnover. In addition to fines, a breach of the GDPR may result in regulatory investigations, reputational damage, orders to cease/change our data processing activities, enforcement notices, assessment notices (for a compulsory audit) and/ or civil claims (including class actions).

Furthermore, these laws impose substantial requirements that require the expenditure of significant funds and employee time to comply, and additional states and countries are enacting new data privacy and security laws, which will require future expansion of our compliance efforts. We also rely on third parties to host or otherwise process some of this data. In some instances, these third parties have experienced immaterial failures to protect data privacy. There can be no assurances that the privacy and security-related measures and safeguards we have put in place in relation to these third parties will be effective to protect us and/ or the relevant personal data from the risks associated with the third-party processing of such data. Any failure by a third party to prevent security breaches could have adverse consequences for us, result in applicable fines and penalties, damage our reputation, and/ or result in civil claims. We will need to expend additional resources and make significant investments to comply with data privacy and security laws. Our failure to comply with our posted privacy policies or with any federal, state, or international privacy and security laws, regulations, industry standards or other legal obligations relating to data privacy and information security or any failure to prevent security breaches of such data could result in significant liability under applicable laws, cause disruption to our business, harm our reputation, have a material adverse effect on our business, and may result in claims, complaints, liabilities, proceedings or actions against us by governmental entities or others, or may require us to change our operations. Any such claims, complaints, proceedings or actions could force us to incur significant expenses in defense of such proceedings or actions, distract our management, increase our costs of doing business, and result in the imposition of monetary penalties.

Performance issues, service interruptions or price increases by our shipping carriers could adversely affect our business and harm our reputation and ability to provide our products on a timely basis.

Reliable shipping is essential to our operations. We rely on providers of transport services for reliable and secure point-to-point transport of our products to our customers and for tracking of these shipments. Should a carrier encounter delivery performance issues such as

loss, damage or destruction of any of our products, it would be costly to replace such products in a timely manner and such occurrences may damage our reputation and lead to decreased demand for our products and increased cost and expense to our business. In addition, any significant increase in shipping rates could adversely affect our operating margins and results of operations. Similarly, strikes, severe weather, natural disasters or other service interruptions affecting delivery services we use would adversely affect our ability to deliver our products (or any other products we commercialize in the future) on a timely basis.

We carry a significant amount of intangible assets on our balance sheet, partially due to the value of the LENSAR brand name, but also intangible assets associated with our technologies, acquired research and development, currently marketed products, and marketing know-how. As a result, we may incur significant impairment charges if the fair value of the intangible assets would be less than their carrying value on our balance sheet at any point in time.

We regularly review our long-lived intangible and tangible assets, including identifiable intangible assets, for impairment. Intangible assets with an indefinite useful life (such as the LENSAR brand name), acquired research projects not ready for use, and acquired development projects not yet ready for use are subject to impairment review. We review other long-lived assets for impairment when there is an indication that an impairment may have occurred.

Our historical financial information may not be a reliable indicator of our future results.

Our historical financial information may not necessarily reflect what our financial position, results of operations or cash flows we will achieve in the future. Accordingly, the historical financial information presented in this Quarterly Report should not be assumed to be a reliable indicator of what our financial condition or results of operations actually could be in the future. In October 2020, we completed a spin-off of LENSAR, Inc. from PDL BioPharma, Inc., or PDL, and we became an independent public company on October 1, 2020 (the “Spin-Off”). As a result, historical financial information for periods prior to the Spin-Off may not necessarily reflect what our financial position, results of operations or cash flows would have been had we been an independent entity during such period or those that we will achieve in the future. The costs and expenses reflected in our historical financial data prior to the Spin-Off include an allocation for certain corporate functions historically provided by PDL, including shared services and infrastructure provided by PDL to us, such as costs of information technology, accounting, tax and legal services, and other corporate and infrastructure services that may be different from the comparable expenses that we would have incurred had we operated as a stand-alone company. Our historical financial information prior to the Spin-Off does not reflect changes that have occurred or may occur in the future in our cost structure and operations as a result of our transition to becoming a stand-alone public company, including changes in our employee base, potential increased costs associated with reduced economies of scale and increased costs associated with SEC reporting and other requirements. Accordingly, the historical financial information for periods that predate our spin-off from PDL should not be assumed to be indicative of what our financial condition or results of operations actually would have been as an independent, publicly traded company during such periods or to be a reliable indicator of what our financial condition or results of operations actually could be in the future.

We are subject to continuing contingent liabilities of PDL BioPharma, Inc. following the Spin-Off.

There are several significant areas where the liabilities of PDL may become our obligations. For example, under the Internal Revenue Code of 1986, as amended, and the related rules and regulations, each corporation that was a member of the PDL consolidated U.S. federal income tax reporting group during any taxable period or portion of any taxable period ending on or before the effective time of the Spin-Off is jointly and severally liable for the U.S. federal income tax liability of the entire PDL consolidated tax reporting group for that taxable period. In addition, the Tax Matters Agreement with PDL allocates the responsibility for taxes between PDL and us. Pursuant to this allocation, we may be responsible for taxes that we would not have otherwise incurred, or that we would have incurred but in different amounts or at different times, on a standalone basis outside of the PDL consolidated group, and the amount of such taxes could be significant. However, if PDL is unable to pay any prior period taxes for which it is responsible, we could be required to pay the entire amount of such taxes.

Potential indemnification obligations to PDL pursuant to the Separation and Distribution Agreement could materially and adversely affect us.

In connection with the Spin-Off, the Company and PDL entered into a Separation and Distribution Agreement, dated September 30, 2020 (the “Separation and Distribution Agreement”), which sets forth the agreements between PDL and the Company regarding the principal transactions necessary to separate the Company from PDL and other agreements that govern certain aspects of the relationship with PDL after the completion of the Spin-Off. Among other things, the Separation and Distribution Agreement provides for indemnification obligations designed to make us financially responsible for substantially all of the liabilities that may exist relating to our business activities, whether incurred prior to or after the spin-off. If we are required to indemnify PDL under the circumstances set forth in the Separation and Distribution Agreement, we may be subject to substantial liabilities.

Our products and operations are subject to extensive government regulation and oversight both in the United States and abroad, and our failure to comply with applicable requirements could harm our business.

Our products are regulated as medical devices. We and our products are subject to extensive regulation in the United States and elsewhere, including by the FDA and its foreign counterparts. The FDA and foreign regulatory agencies regulate, among other things, with respect to medical devices: design, development and manufacturing; testing, labeling, content and language of instructions for use and storage; clinical ~~trials;~~studies; product safety; establishment registration and device listing; marketing, sales and distribution; pre-market clearance, certification and approval; record keeping procedures; advertising and promotion; recalls and field safety corrective actions; post-market surveillance, including reporting of deaths or serious injuries and malfunctions that, if they were to recur, could lead to death or serious injury; post-market approval or certification studies; and product import and export.

The regulations to which we are subject are complex and have tended to become more stringent over time. Regulatory changes could result in restrictions on our ability to carry on or expand our operations, higher than anticipated costs or lower than anticipated sales. In addition, the FDA or other regulatory agencies may change their policies, adopt additional regulations, revise existing regulations, or take other actions that may prevent or delay approval or clearance of our products under development or impact our ability to modify our currently approved or cleared products on a timely basis. We may be found non-compliant as a result of future changes in. or interpretations of, regulations by the FDA or other regulatory agencies. For example, on February 23, 2022, the FDA issued a proposed rule to amend the Quality System Regulation, or QSR, which establishes current good manufacturing practice requirements for medical device manufacturers, to align more closely with the International Organization for Standardization, or ISO, standards. This proposal has not yet been finalized or adopted. Accordingly, it is unclear the extent to which this or any other proposals, if adopted, could impose additional or different regulatory requirements on us that could increase the costs of compliance or otherwise create competition that may negatively affect our business.

The FDA, foreign regulatory authorities and notified bodies enforce ~~these~~their regulatory requirements through, among other means, periodic unannounced inspections and audits. We do not know whether we will be found compliant in connection with any future FDA (or foreign regulatory authorities) inspections or notified bodies’ audits. Failure to comply with applicable regulations could jeopardize our ability to sell our products and result in enforcement actions such as: warning letters; fines; injunctions; civil penalties; termination of distribution; recalls or seizures of products; delays in the introduction of products into the market; total or partial suspension of production; refusal to grant future clearances, certifications or approvals; withdrawals or suspensions of current approvals or certifications, resulting in prohibitions on sales of our products; and in the most serious cases, criminal penalties.

We may not receive, or may be delayed in receiving, the necessary clearances, certifications or approvals for our future products, or modifications to our current products, and failure to timely obtain necessary additional clearances, certifications or approvals for our ALLY System and future products or modifications to our current products would adversely affect our ability to grow our business.

In the United States, before we can market a new medical device, or a new use of, new claim for or significant modification to an existing product, we must first receive either clearance under Section 510(k) of the Federal Food, Drug, and Cosmetic Act, or the FDCA, or approval of a pre-market approval application, or PMA, from the FDA, unless an exemption applies. In the 510(k) clearance process, before a device may be marketed, the FDA must determine that a proposed device is “substantially equivalent” to a legally-marketed “predicate” device, which includes a device that has been previously cleared through the 510(k) process, a device that was legally marketed prior to May 28, 1976 (pre-amendments device), a device that was originally on the U.S. market pursuant to an approved PMA and later down-classified, or a 510(k)-exempt device. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. Clinical data are sometimes required

to support substantial equivalence. In the process of obtaining PMA approval, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to, technical, pre-clinical, clinical trial, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices. To date, our products have received marketing authorization pursuant to the 510(k) clearance process.

Modifications to products that are approved through a PMA application generally require FDA approval. Similarly, certain modifications made to products cleared through a 510(k) may require a new 510(k) clearance. Both the PMA approval and the 510(k) clearance process can be expensive, lengthy and uncertain. The FDA’s 510(k) clearance process usually takes from three to 12 months, but can last longer. The process of obtaining a PMA is much more costly and uncertain than the 510(k) clearance process and generally takes from one to three years, or even longer, from the time the application is filed with the FDA. In addition, a PMA generally requires the performance of one or more clinical trials. Despite the time, effort and cost, a device may not be approved or cleared by the FDA. Any delay or failure

to obtain necessary regulatory clearances or approvals could harm our business. Furthermore, even if we are granted regulatory clearances or approvals, they may include significant limitations on the indicated uses for the device, which may limit the market for the device.

In the United States, we have obtained clearance of our LENSAR Laser System and ALLY System through the 510(k) clearance process. Any modification to these systems that has not been previously cleared may require us to submit a new 510(k) premarket notification and obtain clearance, or submit a PMA and obtain FDA approval, prior to implementing the change. Specifically, any modification to a 510(k)-cleared device that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, design or manufacture, requires a new 510(k) clearance or, possibly, approval of a PMA. The FDA requires every manufacturer to make this determination in the first instance, but the FDA may review any manufacturer’s decision. The FDA may not agree with our decisions regarding whether new clearances or approvals are necessary. We have made modifications to 510(k)-cleared products in the past and have determined based on our review of the applicable FDA regulations and guidance that in certain instances new 510(k) clearances or PMA approvals were not required. We may make modifications or add additional features to our products in the future that we believe do not require a new 510(k) clearance or approval of a PMA. If the FDA disagrees with our determination and requires us to submit new 510(k) notifications or PMA applications for modifications to our previously cleared products for which we have concluded that new clearances or approvals are unnecessary, we may be required to cease marketing or to recall the modified product until we obtain clearance or approval, and we may be subject to significant regulatory fines or penalties. If the FDA requires us to go through a lengthier, more rigorous examination for future products or modifications to existing products than we had expected, product introductions or modifications could be delayed or canceled, which could adversely affect our ability to grow our business.

The ALLY System, which has received clearance from the FDA, enables cataract surgeons to complete the FLACS procedure seamlessly in a single, sterile environment. This clearance is the first stage of a planned, two step commercial release strategy. The ALLY System is ~~expected~~now available to ~~be made widely available to~~all U.S. cataract surgeons and has also received regulatory clearance in ~~2023.~~India. Our ability to place systems in 2022 ~~has been~~was limited by supply chain constraints that ~~have~~ delayed the delivery of certain ALLY System raw materials and the completion and testing of ALLY Systems for use as launch-stock inventory. As the second stage of the ~~commercial release~~ strategy, we plan to seek an additional 510(k) clearance for the phacoemulsification features of the ALLY System in a subsequent 510(k) submission subject to a third party’s phacoemulsification device receiving clearance and serving as ~~the~~a predicate device. As this device will be considered the predicate device for purposes of evaluating the ALLY System’s phacoemulsification functionality, we are unable to submit ~~our second~~a 510(k) submission seeking clearance of the phacoemulsification features within the ALLY System until the predicate device receives FDA clearance. Accordingly, we ~~have delivered~~are delivering the ALLY System to surgeons ~~in the initial launch~~ with the phacoemulsification features ~~remaining~~ disabled and/or ~~removed and expect this to continue.~~removed. If the third party is unsuccessful in obtaining clearance on its projected timelines, or at all, we could be delayed in our submission for 510(k) clearance for the phacoemulsification features of our ALLY System, and/or we may be required to find an alternative component from a different third party to replace the component the third party is developing. We may be unable to identify a replacement supplier, and even if we are, the use of a different third party component could require additional data or other activities that could increase our costs or delay our projected timing. If any of these events were to occur, we could be materially delayed in our efforts to seek 510(k) clearance of all features of our ALLY System. Even if the third party obtains clearance for the phacoemulsification device, the FDA has significant discretion in the 510(k) clearance process, and we cannot guarantee that we will obtain clearance of our ALLY System as proposed.

The FDA, foreign regulatory authorities or notified bodies can delay, limit or deny clearance, certification or approval of a device for many reasons, including:

In September 2022, we submitted an application for certification of the ALLY System ~~for certification~~ in the EU and we intend to submit additional marketing or certification applications outside the United States in an effort to commercialize the ALLY System in additional countries and operating regions. Subject to the transitional provisions and in order to sell our products in EU member states, our products must comply with the general safety and performance requirements of the EU Medical Devices Regulation, which repeals and replaces the Medical Devices Directive. Compliance with these requirements is a prerequisite to be able to affix the European Conformity, ~~(“CE”)~~or CE, mark to our products, without which they cannot be sold or marketed in the EU. All medical devices placed on the market in the EU must meet the general safety and performance requirements laid down in Annex I to the EU Medical Devices Regulation, including the requirement that a medical device must be designed and manufactured in such a way that, during normal conditions of use, it is suitable for its intended purpose. Medical devices must be safe and effective and must not compromise the clinical condition or safety of patients, or the safety and health of users and, where applicable, other persons, provided that any risks which may be associated with their use constitute acceptable risks when weighed against the benefits to the patient and are compatible with a high level of protection of health and safety, taking into account the generally acknowledged state of the art. To demonstrate compliance with the general safety and performance requirements, we must undergo a conformity assessment procedure, which varies according to the type of medical device and its (risk) classification. A conformity assessment procedure generally requires the intervention of a notified body. The notified body would typically audit and examine the technical file and the quality system for the manufacture, design and final inspection of our devices. If satisfied that the relevant product conforms to the relevant general safety and performance requirements, the notified body issues a certificate of conformity, which the manufacturer uses as a basis for its own declaration of conformity. The manufacturer may then apply the CE mark to the device, which allows the device to be placed on the market throughout the EU. The aforementioned EU rules are generally applicable in the European Economic Area, ~~(“EEA”)~~or EEA, which consists of the 27 EU member states plus Norway, Liechtenstein and Iceland. If we fail to comply with applicable laws and regulations, we would be unable to affix the CE mark to our products, which would prevent us from selling them within the EU and these three countries.

In the EU, devices lawfully placed on the market pursuant to the EU Medical Devices Directive prior to May 26, 2021 and devices placed on the market from May 26, 2021 in accordance with the requirements of the transitional provisions, may generally continue to be made available on the market or put into service until May 26, 2025. In particular, no substantial change must be made to the device as such a modification would trigger the obligation to obtain a new certification under the EU Medical Devices Regulation and therefore to have a notified body conducting a new conformity assessment of the devices. Once our devices are certified under the EU Medical Devices Regulation, we must inform the notified body that carried out the conformity assessment of the medical devices that we market or sell in the EU and the EEA of any planned substantial changes to our quality system or substantial changes to our medical devices that could affect compliance with the general safety and performance requirements laid down in Annex I to the EU Medical Devices Regulation or cause a substantial change to the intended use for which the device has been CE marked. The notified body will then assess the planned changes and verify whether they affect the products’ ongoing conformity with the EU Medical Devices Regulation. If the assessment is favorable, the notified body will issue a new certificate of conformity or an addendum to the existing certificate attesting compliance with the general safety and performance requirements and quality system requirements laid down in the Annexes to the EU Medical Devices Regulation. The notified body may disagree with our proposed changes and product introductions or modifications could be delayed or canceled, which could adversely affect our ability to grow our business.

Following the end of the “Brexit” transitional period, from January 1, 2021, the Medicines and Healthcare products Regulatory Agency, or MHRA, became the UK’s independent regulatory agency for medical devices. Post-Brexit, amendments have been made to the existing UK medical devices legislation which require medical devices to be registered with the MHRA before being placed on the Great Britain market. Manufacturers based outside of the UK need to appoint a UK Responsible Person to register devices with the MHRA. Following a government consultation on changes to the UK’s medical device regulations, the response to which was published onOn June 26, 2022, ~~it is anticipated that amendments~~the MHRA published its response to a 10-week consultation on the ~~legislation will soon be published by the government and should become applicable by July 1, 2023 so that~~future regulation of medical devices in the United Kingdom. Regulations implementing the new regime were originally scheduled to come into force in July 2023, but the MHRA has recently postponed the mandatory deadline until July 2024. Medical devices bearing CE marks issued by EU notified bodies under the EU Medical Devices Regulation or EU Medical Devices Directive are now subject to transitional arrangements. Devices certified under the EU Medical Devices Regulation may be placed on the market in Great Britain ~~(England, Scotland, and Wales)~~under the CE mark until either the certificate expires or for five years after the new regulations take effect, whichever is sooner. However, devices certified under the EU Medical Devices Directive may be placed on the market until either the certificate expires or for three years after the new regulations take effect, whichever is sooner. Following these transitional periods, all medical devices will require a UK Conformity ~~Assessment,~~Assessed, or UKCA, mark. ~~However, within~~Manufacturers may choose to use the ~~government’s consultation response, it has proposed that transition periods will be included in the revised legislation so that products with existing and valid conformity assessments (CE~~UKCA mark ~~or UKCA mark) could continue to be placed~~ on ~~the Great Britain market for~~ a ~~maximum of 3-5 years after July 1, 2023, depending on which legislation the medical device has been certified under.~~voluntary basis until June 30, 2024. However, UKCA marking ~~alone~~ will not be recognized in the EU. Following the transitional period, compliance with the UK regulations will be a prerequisite to be able to affix the UKCA mark to medical devices, without which they cannot be sold or marketed in Great Britain. The rules for placing medical devices on the Northern Ireland market will differ from those in the Great ~~Britain.~~Britain and will continue to be governed according to EU requirements. These modifications may have an effect on the way we intend to conduct our business in these countries.

Failure to comply with post-marketing regulatory requirements could subject us to enforcement actions, including substantial penalties, and might require us to recall or withdraw a product from the market.

We are subject to ongoing and pervasive regulatory requirements governing, among other things, the manufacture, marketing, advertising, medical device reporting, sale, promotion, import, export, registration, and listing of devices. The regulations to which we are subject are complex and have become more stringent over time. Regulatory changes could result in restrictions on our ability to continue or expand our operations, higher than anticipated costs, or lower than anticipated sales. Even after we have obtained the proper regulatory approval, certification or clearance to market a device, we have ongoing responsibilities under FDA regulations and applicable foreign laws and regulations. The FDA, state and foreign regulatory authorities have broad enforcement powers. Our failure to comply with applicable regulatory requirements could result in enforcement action by the FDA, state or foreign regulatory authorities or notified bodies, which may include any of the following sanctions:

Any of these sanctions could result in higher than anticipated costs or lower than anticipated sales and have a material adverse effect on our reputation, business, financial condition and results of operations.

In addition, the FDA and foreign regulatory authorities may change their clearance or certification policies, adopt additional regulations or revise existing regulations, or take other actions, which may prevent or delay clearance, certification or approval of our future products under development or impact our ability to modify our currently cleared or certified products on a timely basis. Such policy or regulatory changes could impose additional requirements upon us that could delay our ability to obtain new clearances, certifications or approvals, increase the costs of compliance or restrict our ability to maintain our clearances of our current products. For more information, see “—Legislative or regulatory reforms in the United States or the EU may make it more difficult and costly for us to obtain regulatory clearances, certifications or approvals for our products or to manufacture, market or distribute our products after clearance, certification or approval is obtained.”

Our products must be manufactured in accordance with federal, state and foreign regulations, and we or any of our suppliers could be forced to recall products or terminate production if we fail to comply with these regulations.

The methods used in, and the facilities used for, the manufacture of our products must comply with the FDA’s QSR, which is a complex regulatory scheme that covers the procedures and documentation of the design, testing, production, process controls, quality assurance, labeling, packaging, handling, storage, distribution, installation, servicing and shipping of medical devices. Furthermore, we are required to verify that our suppliers maintain facilities, procedures and operations that comply with our quality standards and applicable regulatory requirements. The FDA enforces the QSR through periodic announced or unannounced inspections of medical device manufacturing facilities, which may include the facilities of subcontractors. Our products are also subject to similar state regulations and various laws and regulations of foreign countries governing manufacturing.

Our third-party manufacturers may not take the necessary steps to comply with applicable regulations, which could cause delays in the delivery of our products. In addition, failure to comply with applicable FDA (or other regulatory authorities) requirements or later discovery of previously unknown problems with our products or manufacturing processes could result in, among other things: warning letters or untitled letters; fines, injunctions or civil penalties; suspension or withdrawal of ~~approvals;~~approvals or certifications; seizures or recalls

of our products; total or partial suspension of production or distribution; administrative or judicially imposed sanctions; the FDA’s (or foreign regulatory

authorities’ or notified bodies’) refusal to grant pending or future clearances, certifications or approvals for our products; clinical holds; refusal to permit the import or export of our products; and criminal prosecution of us or our employees.

Any of these actions could significantly and negatively affect supply of our products. If any of these events occurs, our reputation could be harmed, we could be exposed to product liability claims and we could lose customers and experience reduced sales and increased costs.

The misuse or off-label use of our LENSAR Laser System or ALLY System, may harm our reputation in the marketplace, result in injuries that lead to product liability suits or result in costly investigations, fines or sanctions by regulatory bodies if we are deemed to have engaged in the promotion of these uses, any of which could be costly to our business.

Our LENSAR Laser System and ALLY System are ophthalmic surgical lasers indicated for the creation of anterior capsulotomies, use in patients undergoing surgery requiring laser-assisted fragmentation of the cataractous lens, and for creating cuts/incisions in the cornea. We train our marketing personnel and direct sales force to not promote our devices for uses outside of the FDA-approved indications for use, known as “off-label uses.” We cannot, however, prevent a physician from using our devices off-label, when in the physician’s independent professional medical judgment he or she deems it appropriate. There may be increased risk of injury to patients if physicians attempt to use our devices off-label. Furthermore, the use of our devices for indications other than those approved by the FDA or a foreign regulatory authority or certified by a notified body may not effectively treat such conditions, which could harm our reputation in the marketplace among physicians and patients.

If the FDA or any foreign regulatory authority determines that our promotional materials or training constitute promotion of an off-label use, it could request that we modify our training or promotional materials or subject us to regulatory or enforcement actions, including the issuance or imposition of an untitled letter, which is used for violators that do not necessitate a warning letter, injunction, seizure, civil fine or criminal penalties. It is also possible that other federal, state or foreign enforcement authorities might take action under other regulatory authority, such as false claims laws, if they consider our business activities to constitute promotion of an off-label use, which could result in significant penalties, including, but not limited to, criminal, civil and administrative penalties, damages, fines, disgorgement, exclusion from participation in government healthcare programs and the curtailment of our operations.

In addition, physicians may misuse our products or use improper techniques if they are not adequately trained, potentially leading to injury and an increased risk of product liability. If our devices are misused or used with improper technique, we may become subject to costly litigation by our customers or their patients. Product liability claims could divert management’s attention from our core business, be expensive to defend and result in sizeable damage awards against us that may not be covered by insurance.

Our products may cause or contribute to adverse medical events or be subject to failures or malfunctions that we are required to report to the FDA (or similar foreign authorities), and if we fail to do so, we would be subject to sanctions that could harm our reputation, business, financial condition and results of operations. The discovery of serious safety issues with our products, or a recall of our products either voluntarily or at the direction of the FDA or another governmental authority, could have a negative impact on us.

We are subject to the FDA’s medical device reporting regulations and similar foreign regulations, which require us to report to the FDA (or similar foreign authorities) when we receive or become aware of information that reasonably suggests that one or more of our products may have caused or contributed to a death or serious injury or malfunctioned in a way that, if the malfunction were to recur, it could cause or contribute to a death or serious injury. The timing of our obligation to report is triggered by the date we become aware of the adverse event as well as the nature of the event. We may fail to report adverse events of which we become aware within the prescribed timeframe. We may also fail to recognize that we have become aware of a reportable adverse event, especially if it is not reported to us as an adverse event or if it is an adverse event that is unexpected or removed in time from the use of the product. If we fail to comply with our reporting obligations, the FDA (or similar foreign authorities) could take action, including warning letters, untitled letters, administrative actions, criminal prosecution, imposition of civil monetary penalties, revocation of our device clearance, certification or approval, seizure of our products or delay in clearance, certification or approval of future products.

The FDA and foreign regulatory authorities have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture of a product or in the event that a product poses an unacceptable risk to health. The FDA’s authority to require a recall must be based on a finding that there is reasonable probability that the device could cause serious injury or death. We may also choose to voluntarily recall a product if any material deficiency is found. A government-mandated or voluntary recall by us could occur as a result of an unacceptable risk to health, component failures, malfunctions, manufacturing defects, labeling or design deficiencies, packaging defects or other deficiencies or failures to comply with applicable regulations. Product defects or other errors may occur in the future.

Depending on the corrective action we take to redress a product’s deficiencies or defects, the FDA (or foreign regulatory authorities) may require, or we may decide, that we will need to obtain new clearances, certifications or approvals for the device before we may

market or distribute the corrected device. Seeking such clearances, certifications or approvals may delay our ability to replace the recalled devices in a timely manner. Moreover, if we do not adequately address problems associated with our devices, we may face additional regulatory enforcement action, including warning letters from the FDA (or foreign regulatory authorities), product seizure, injunctions, administrative penalties or civil or criminal fines.

Companies are required to maintain certain records of recalls and corrections, even if they are not reportable to the FDA (or similar foreign authorities). We may initiate voluntary withdrawals or corrections for our products in the future that we determine do not require notification of the FDA (or similar foreign authorities). If the FDA (or similar foreign authorities) disagrees with our determinations, it could require us to report those actions as recalls and we may be subject to enforcement action. A future recall announcement could harm our reputation with customers, potentially lead to product liability claims against us and negatively affect our sales. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, will require the dedication of our time and capital, distract management from operating our business and may harm our reputation and financial results.

If we do not obtain and maintain international regulatory registrations, clearances, certifications or approvals for our products, we will be unable to market and sell our products outside of the United States.

Sales of our products outside of the United States are subject to foreign regulatory requirements that vary widely from country to country. In addition, the FDA regulates exports of medical devices from the United States. While the regulations of some countries may not impose barriers to marketing and selling our products or only require notification, others require that we obtain the clearance, certification or approval of a specified regulatory body. Complying with foreign regulatory requirements, including obtaining registrations, clearances, certifications or approvals, can be expensive and time-consuming, and we may not receive regulatory clearances, certifications or approvals in each country in which we plan to market our products or we may be unable to do so on a timely basis. The time required to obtain registrations, clearances, certifications or approvals, if required by other countries, may be longer than that required for FDA clearance or approval, and requirements for such registrations, clearances, certifications or approvals may significantly differ from FDA requirements. If we modify our products, we may need to apply for additional regulatory clearances, certifications or approvals before we are permitted to sell the modified product. In addition, we may not continue to meet the quality and safety standards required to maintain the authorizations (approvals or certifications) that we have received. If we are unable to maintain our authorizations or certifications in a particular country, we will no longer be able to sell the applicable product in that country.

Regulatory clearance or approval by the FDA does not ensure registration, clearance, certification or approval by regulatory authorities or notified bodies in other countries, and registration, clearance, certification or approval by one or more foreign regulatory authorities or notified bodies does not ensure registration, clearance, certification or approval by regulatory authorities or notified bodies in other foreign countries or by the FDA. However, a failure or delay in obtaining registration or regulatory clearance, certification or approval in one country may have a negative effect on the regulatory process in others.

The clinical trial process is lengthy and expensive with uncertain outcomes. Results of earlier studies may not be predictive of future clinical trial results, or the safety or efficacy profile for such products.

Clinical testing is difficult to design and implement, can take many years, can be expensive and carries uncertain outcomes. We intend to conduct additional clinical trials and to generate clinical data that will help us demonstrate the benefits of our system compared to manual cataract surgery conducted without a laser system, or with competing laser systems.

The results of preclinical studies and clinical trials of our products conducted to date and ongoing or future studies and trials of our current, planned or future products may not be predictive of the results of later clinical trials, and interim results of a clinical trial do not necessarily predict final results. Our interpretation of data and results from our clinical trials do not ensure that we will achieve similar results in future clinical trials. In addition, preclinical and clinical data are often susceptible to various interpretations and analyses, and many companies that have believed their products performed satisfactorily in preclinical studies and earlier clinical trials have nonetheless failed to replicate results in later clinical trials. Products in later stages of clinical trials may fail to show the desired safety and efficacy despite having progressed through nonclinical studies and earlier clinical trials. Failure can occur at any stage of clinical testing. Our clinical studies may produce negative or inconclusive results, and we may decide, or regulators or notified bodies may require us, to conduct additional clinical and non-clinical testing in addition to those we have planned.

The initiation and completion of any of clinical studies may be prevented, delayed, or halted for numerous reasons. We may experience delays in our ongoing clinical trials for a number of reasons, which could adversely affect the costs, timing or successful completion of our clinical trials, including related to the following:

Any of these occurrences may significantly harm our business, financial condition and prospects. In addition, any further disruptions ~~caused by~~related to the COVID-19 pandemic or similar health crises may increase the likelihood that we encounter such difficulties or delays in

initiating, enrolling, conducting or completing our planned and ongoing clinical trials. Many of the factors that cause, or lead to, a delay in the commencement or completion of clinical trials may also ultimately lead to the denial of regulatory approval or certification of our product candidates.

Patient enrollment in clinical trials and completion of patient follow-up depend on many factors, including the size of the patient population, the nature of the trial protocol, the proximity of patients to clinical sites, the eligibility criteria for the clinical trial, patient compliance, competing clinical trials and clinicians’ and patients’ perceptions as to the potential advantages of the product being studied in relation to other available therapies, including any new treatments that may be approved for the indications we are investigating. For example, patients may be discouraged from enrolling in our clinical trials if the trial protocol requires them to undergo extensive post-treatment procedures or follow-up to assess the safety and efficacy of a product candidate, or they may be persuaded to participate in

contemporaneous clinical trials of a competitor’s product candidate. In addition, patients participating in our clinical trials may drop out before completion of the trial or experience adverse medical events unrelated to our products. Delays in patient enrollment or failure of patients to continue to participate in a clinical trial may delay commencement or completion of the clinical trial, cause an increase in the costs of the clinical trial and delays, or result in the failure of the clinical trial.

Clinical trials must be conducted in accordance with the laws and regulations of the FDA and other applicable regulatory authorities’ legal requirements, regulations or guidelines, and are subject to oversight by these governmental agencies and IRBs, or other reviewing bodies, at the medical institutions where the clinical trials are conducted. In addition, clinical trials must be conducted with supplies of our devices produced under cGMP, requirements and other regulations. Furthermore, we rely on CROs, and clinical trial sites to ensure the proper and timely conduct of our clinical trials and while we have agreements governing their committed activities, we have limited influence over their actual performance. We depend on our collaborators and on medical institutions and CROs to conduct our clinical trials in compliance with good clinical practice, or GCP, requirements. To the extent our collaborators or the CROs fail to enroll participants for our clinical trials, fail to conduct the study to GCP standards or are delayed for a significant time in the execution of trials, including achieving full enrollment, we may be affected by increased costs, program delays or both. In addition, clinical trials that are conducted in countries outside the United States may subject us to further delays and expenses as a result of increased shipment costs, additional regulatory requirements and the engagement of non-U.S. CROs, as well as expose us to risks associated with clinical investigators who are unknown to the FDA, and different standards of diagnosis, screening and medical care.

Even if our future products are cleared or approved in the United States, commercialization of our products in foreign countries would require clearance, certification or approval by regulatory authorities or notified bodies in those countries. Clearance, certification or approval procedures vary among jurisdictions and can involve requirements and administrative review periods different from, and greater than, those in the United States, including additional preclinical studies or clinical trials. Any of these occurrences could have an adverse effect on our business, financial condition and results of operations.

Legislative or regulatory reforms in the United States or the EU may make it more difficult and costly for us to obtain regulatory clearances, certifications or approvals for our products or to manufacture, market or distribute our products after clearance, certification or approval is obtained.

From time to time, legislation is drafted and introduced in Congress that could significantly change the statutory provisions governing the regulation of medical devices. The FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions, which may prevent or delay approval or clearance of our future products under development or impact our ability to modify our currently cleared products on a timely basis. For example, in November 2018, FDA officials announced steps that the FDA intended to take to modernize the premarket notification pathway under Section 510(k) of the Federal Food, Drug, and Cosmetic Act. Among other things, the FDA announced that it planned to develop proposals to drive manufacturers utilizing the 510(k) pathway toward the use of newer predicates. These proposals included plans to potentially sunset certain older devices that were used as predicates under the 510(k) clearance pathway, and to potentially publish a list of devices that have been cleared on the basis of demonstrated substantial equivalence to predicate devices that are more than 10 years old. These proposals have not yet been finalized or adopted, and the FDA may work with Congress to implement such proposals through legislation. Accordingly, it is unclear the extent to which any proposals, if adopted, could impose additional regulatory requirements on us that could delay our ability to obtain new 510(k) clearances, increase the costs of compliance, or restrict our ability to maintain our current clearances, or otherwise create competition that may negatively affect our business.

More recently, in September 2019, the FDA issued revised final guidance describing an optional “safety and performance based” premarket review pathway for manufacturers of “certain, well-understood device types” to demonstrate substantial equivalence under the 510(k) clearance pathway by showing that such device meets objective safety and performance criteria established by the FDA, thereby obviating the need for manufacturers to compare the safety and performance of their medical devices to specific predicate devices in the clearance process. The FDA maintains a list device types appropriate for the “safety and performance based” pathway and continues to develop product-specific guidance documents that identify the performance criteria for each such device type, as well as the recommended testing methods where feasible. The FDA may establish performance criteria for classes of devices for which we

or our competitors seek or currently have received clearance, and it is unclear the extent to which such performance standards, if established, could impact our ability to obtain new 510(k) clearances or otherwise create competition that may negatively affect our business.

In addition, FDA regulations and guidance are often revised or reinterpreted by the FDA in ways that may significantly affect our business and our products. Any new statutes, regulations or revisions or reinterpretations of existing regulations may impose additional costs or lengthen review times of any future products or make it more difficult to obtain approval for, manufacture, market or distribute our products. We cannot determine what effect changes in regulations, statutes, legal interpretation or policies, when and if promulgated, enacted or adopted may have on our business in the future. Such changes could, among other things, require additional testing prior to obtaining clearance or approval; changes to manufacturing methods; recall, replacement or discontinuance of our products; or additional record keeping. The FDA’s and other regulatory authorities’ policies may change and additional government regulations may be enacted

that could prevent, limit or delay regulatory clearance or approval of our product candidates. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the United States or abroad. If we are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we are not able to maintain regulatory compliance, we may be subject to enforcement action and we may not achieve or sustain profitability.

In addition, the regulatory landscape related to medical devices in the EU recently evolved. On ~~April 5, 2017,~~May 26, 2021, the EU Medical Devices Regulation ~~was adopted with~~became applicable, and repealed and replaced the ~~aim~~EU Medical Devices Directive and the Active Implantable Medical Devices Directive. Unlike directives, which must be implemented into the national laws of ~~ensuring better protection~~the EU member states, regulations are directly applicable (i.e., without the need for adoption of ~~public health~~EU member state laws implementing them) in all EU member states and ~~patient safety.~~are intended to eliminate current differences in the regulation of medical devices among EU member states. The EU Medical Devices Regulation, ~~establishes~~among other things, is intended to establish a uniform, transparent, predictable and sustainable regulatory framework across the EU for medical devices and ~~seeks to~~ ensure a high level of safety and health while supporting innovation. Unlike the EU Medical Devices Directive, the EU Medical Devices Regulation is directly applicable in EU member states without the need for member states to implement into national law. This aims at increasing harmonization across the EU. The EU Medical Devices Regulation became effective on May 26, 2021. Devices lawfully placed on the market pursuant to the EU Medical Devices Directive prior to May 26, 2021 may generally continue to be made available on the market or put into service until May 26, 2025, provided that the requirements of the transitional provisions are fulfilled. In particular, the certificate in question must still be valid. However, even in this case, manufacturers must comply with a number of new or reinforced requirements set forth in the EU Medical Devices Regulation with regard to registration of economic operators and of devices, post-market surveillance, market surveillance and vigilance requirements.

~~The aforementioned EU rules are generally applicable in the EEA. These modifications~~Regulation may have an effect on the way we intend to develop our business in the EU and EEA. For example, as a result of the transition towards the new regime, notified body review times have lengthened, and product introductions could be delayed, which could adversely affect our ability to grow our business in a timely manner.

Disruptions at the FDA and other government agencies and notified bodies caused by funding shortages or global health concerns could hinder their ability to hire, retain or deploy key leadership and other personnel, or otherwise prevent new or modified products from being developed, cleared or approved or commercialized in a timely manner or at all, which could negatively impact our business.

The ability of the FDA, foreign regulatory agencies and notified bodies to review and clear, certify or approve new products can be affected by a variety of factors, including government budget and funding levels, statutory, regulatory, and policy changes, the FDA’s, foreign regulatory agencies’ and notified bodies’ ability to hire and retain key personnel and accept the payment of user fees, and other events that may otherwise affect the FDA’s, foreign regulatory agencies’ and notified bodies’ ability to perform routine functions. Average review times at the FDA, foreign regulatory agencies and notified bodies have fluctuated in recent years as a result. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable. Disruptions at the FDA, foreign regulatory agencies and notified bodies may also slow the time necessary for new medical devices or modifications to cleared, certified or approved medical devices to be reviewed and cleared, certified or approved by necessary government agencies (or other notified bodies), which would adversely affect our business. For

example, over the last several years, the U.S. government has shut down several times and certain regulatory agencies, such as the FDA, have had to furlough critical FDA employees and stop critical activities.

Separately, in response to the COVID-19 pandemic, ~~in March 2020,~~ the FDA ~~announced its intention to postpone~~postponed most inspections of domestic and foreign manufacturing facilities ~~and on March 18, 2020,~~at various points. Even though the FDA temporarily postponed routine surveillance inspections of domestic manufacturing facilities. Subsequently, in July 2020, the FDA resumed certain on-site inspections of domestic manufacturing facilities subject to a risk-based prioritization system. The FDA utilized this risk-based assessment system to assist in determining when and where it was safest to conduct prioritized domestic inspections. In May 2021, the FDA outlined a detailed plan to move toward a more consistent state of inspectional operations, and in July 2021, the FDAhas since resumed standard ~~inspectional~~inspection operations of domestic facilities ~~and was continuing to maintain this level of operation as of September 2021. More recently,~~where feasible, the FDA has continued to monitor and implement changes to its inspectional activities to ensure the safety of its employees and those of the firms it regulates as it adapts to the evolving COVID-19 pandemic, and any resurgence of the virus or emergence of new variants may lead to further inspectional delays. Regulatory authorities outside the United States may adopt similar restrictions or other policy measures in response to the COVID-19 pandemic. Regulatory authorities outside the United States have adopted similar restrictions or other policy measures in response to the COVID-19 pandemic. If a prolonged government shutdown occurs, or if global health concerns continue to prevent the FDA or other regulatory authorities or notified bodies from conducting their regular inspections, audits, reviews, or other regulatory activities, it could significantly impact the ability of the FDA, or other regulatory authorities or notified bodies, to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

In the EU, notified bodies must be officially designated to certify products and services in accordance with the EU Medical Devices Regulation. Several notified bodies have been designated under the EU Medical Devices Regulation. However, the COVID-19 pandemic has significantly slowed down their designation process and the current designated notified bodies are facing a large amount of requests

with the new regulation as a consequence of which review times may have lengthened. This situation may impact the way we are conducting our business in the EU and the EEA and the ability of our notified body to timely review and process our regulatory submissions and perform its audits.

Enacted and future healthcare legislation may increase the difficulty and cost for us to commercialize our ALLY Adaptive Cataract Treatment System or other products we may develop in the future and may affect the prices we may set.

In the United States, the EU and other jurisdictions, there have been and continue to be a number of legislative initiatives and judicial challenges to contain healthcare costs. For example, in March 2010, the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act, or collectively the ACA, was passed, which substantially changed the way healthcare is financed by both governmental and private insurers, and significantly impacted the United States medical device industry.

Since its enactment, there have been judicial, executive and Congressional challenges to certain aspects of the ACA, as well as other efforts to challenge, repeal or replace the ACA that may impact our business or financial condition. On June 17, 2021, the U.S. Supreme Court dismissed the most recent judicial challenge to the ACA without specifically ruling on the constitutionality of the ACA. Prior to the Supreme Court’s decision, President Biden issued an executive order to initiate a special enrollment period from February 15, 2021 through August 15, 2021 for purposes of obtaining health insurance coverage through the ACA marketplace. The executive order also instructed certain governmental agencies to review and reconsider their existing policies and rules that limit access to healthcare, including among others, reexamining Medicaid demonstration projects and waiver programs that include work requirements, and policies that create unnecessary barriers to obtaining access to health insurance coverage through Medicaid or the ACA.

Moreover, other legislative changes have been proposed and adopted since the ACA was enacted. For example, the Budget Control Act of 2011, among other things, included reductions to Medicare payments to providers Additionally, the American Taxpayer Relief Act of 2012, among other things, reduced Medicare payments to several providers, including hospitals, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years. We expect that additional U.S. federal healthcare reform measures will be adopted in the future, any of which could limit the amounts that the U.S. federal government will pay for healthcare products and services, which could result in reduced demand for our products or additional pricing pressures and could seriously harm our business.

~~In addition,~~For EU states, in December 2021, the EU Regulation No 2021/2282 on Health Technology Assessment (“HTA”), amending Directive 2011/24/EU, was adopted. This regulation, which became effective in January 2022 and will become applicable from January 12, 2025 onwards, intends to boost cooperation among EU member states in assessing health technologies, including some medical devices, and providing the basis for cooperation at the EU level for joint clinical assessments in these areas. The regulation foresees a three-year transitional period and will permit EU member states to use common HTA tools, methodologies, and procedures across the EU, working together in four main areas, including joint clinical assessment of the innovative health technologies with the most potential impact for patients, joint scientific consultations whereby developers can seek advice from HTA authorities, identification of emerging health technologies to identify promising technologies early, and continuing voluntary cooperation in other areas. Individual EU member states will continue to be responsible for assessing non-clinical (e.g., economic, social, ethical) aspects of health technologies, and making decisions on pricing and reimbursement.

We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action in the United States, the EU or any other jurisdiction. If we or any third parties we may engage are slow or unable to adapt to changes in existing requirements or the adoption of new requirements or policies, or if we or such third parties are not able to maintain regulatory compliance, we may not be able to achieve or sustain profitability or successfully market our ALLY System or any other products we may develop and obtain clearance for in the future.

We may be subject to certain federal, state and foreign laws pertaining to healthcare fraud and abuse, including anti-kickback, self-referral, false claims and fraud laws, and any violations by us of such laws could result in fines or other penalties.

Although none of the procedures using our products are currently covered by any state, federal or foreign government healthcare programs or other third-party payors, applicable agencies and regulators may interpret that our commercial, research and other financial relationships with healthcare providers and institutions are nonetheless subject to various federal, state and foreign laws intended to prevent healthcare fraud and abuse, including the following:

If our operations are found to be in violation of any of the laws described above or any other governmental laws and regulations that may apply to us, we may be subject to significant penalties, including civil, criminal and administrative penalties, damages, fines, exclusion from government-funded healthcare programs, such as Medicare and Medicaid or similar programs in other countries or jurisdictions, disgorgement, individual imprisonment, contractual damages, reputational harm, diminished profits and the curtailment or restructuring of our operations. Further, defending against any such actions can be costly, time-consuming and may require significant personnel resources. Therefore, even if we are successful in defending against any such actions that may be brought against us, our business may be impaired.

We are subject to anti-corruption, anti-bribery and similar laws and any violations by us of such laws could result in fines or other penalties.

A majority of our revenue is derived from operations outside of the United States and is subject to requirements under the U.S. Treasury Department’s Office of Foreign Assets Control, anti-corruption, anti-bribery and similar laws, such as the Foreign Corrupt Practices

Act, or FCPA, the U.K. Bribery Act 2010, and other anti-corruption, anti-bribery and anti-money laundering laws in countries in which we conduct activities. The FCPA prohibits, among other things, improper payments or offers of payments to foreign governments and their officials for the purpose of obtaining or retaining business. Recently, the U.S. Department of Justice has increased its enforcement activities with respect to the FCPA.

Our safeguards to discourage improper payments or offers of payments by our employees, consultants, sales agents or distributors may be ineffective. Any violations of the FCPA and similar laws may result in severe criminal or civil sanctions, or other liabilities or proceedings against us, and would likely harm our reputation, business, financial condition and result of operations.

Our employees, independent contractors, principal investigators, consultants, vendors, distributors and contract research organizations may engage in misconduct or other improper activities, including noncompliance with regulatory standards and requirements.

We are exposed to the risk that our employees, independent contractors, principal investigators, consultants, vendors, distributors and contractor research organizations, or CROs, may engage in fraudulent or other illegal activity. While we have policies and procedures in place prohibiting such activity, misconduct by these parties could include among other infractions or violations intentional, reckless or negligent conduct or unauthorized activity that violates: (i) FDA (and foreign regulatory authorities’) regulations, including those laws that require the reporting of true, complete and accurate information to the FDA (or foreign regulatory authorities); (ii) manufacturing standards; (iii) federal, state and foreign healthcare fraud and abuse laws and regulations; (iv) laws that require the true, complete and accurate reporting of financial information or data; or (v) other commercial or regulatory laws or requirements. Specifically, sales, marketing and business arrangements in the healthcare industry are subject to extensive laws and regulations intended to prevent fraud, kickbacks, self-dealing and other abusive practices. These laws and regulations may restrict or prohibit a wide range of pricing, discounting, marketing and promotion, sales commission, customer incentive programs and other business arrangements. Activities subject to these laws also involve the improper use of information obtained in the course of clinical trials, which could result in regulatory sanctions and serious harm to our reputation. It is not always possible to identify and deter misconduct by our employees and other third parties, and the precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to be in compliance with such laws or regulations. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of civil, criminal and administrative penalties, damages, monetary fines, contractual damages, reputational harm, diminished profits and future earnings, and curtailment of our operations, any of which could adversely affect our ability to operate our business and our results of operations.

Our success will depend on our ability to obtain, maintain and protect our intellectual property rights.

Our commercial success will depend in part on our success in obtaining and maintaining issued patents, trademarks and other intellectual property rights in the United States and elsewhere and protecting our proprietary technology. If we do not adequately protect our intellectual property and proprietary technology, competitors may be able to use our technologies we have acquired in the marketplace and erode or negate any competitive advantage we may have, which could harm our business and ability to achieve profitability.

We rely on a combination of contractual provisions, confidentiality procedures and patent, copyright, trademark, trade secret and other intellectual property laws to protect the proprietary aspects of our products, brands, technologies and data. These legal measures afford only limited protection, and competitors or others may gain access to or use our intellectual property and proprietary information. Our success will depend, in part, on preserving our trade secrets, maintaining the security of our data and know-how and obtaining and maintaining other intellectual property rights. We may not be able to obtain or maintain intellectual property or other proprietary rights necessary to our business or in a form that provides us with a competitive advantage.

In addition, our efforts to enter into confidentiality agreements with our employees, consultants, clients and other vendors who have access to such information, our trade secrets, data and know-how may not prevent unauthorized use, misappropriation, or disclosure to unauthorized parties, and could otherwise become known or be independently discovered by third parties. Our intellectual property, including trademarks, could be challenged, invalidated, infringed, and circumvented by third parties, and our trademarks could also be diluted, declared generic or found to be infringing on other marks. If any of the foregoing occurs, we could be forced to re-brand our products, resulting in loss of brand recognition and requiring us to devote resources to advertising and marketing new brands, and suffer other competitive harm. Third parties may also adopt trademarks similar to ours, which could harm our brand identity and lead to market confusion.

Failure to obtain and maintain intellectual property rights necessary to our business and failure to protect, monitor and control the use of our intellectual property rights could negatively impact our ability to compete and cause us to incur significant expenses. The intellectual property laws and other statutory and contractual arrangements in the United States and other jurisdictions may not provide

sufficient protection in the future to prevent the infringement, use, violation or misappropriation of our trademarks, data, technology and other intellectual property and services, and may not provide an adequate remedy if our intellectual property rights are infringed, misappropriated or otherwise violated.

We rely, in part, on our ability to obtain, maintain, expand, enforce, and defend the scope of our intellectual property portfolio or other proprietary rights, including the amount and timing of any payments we may be required to make in connection with the licensing, filing, defense and enforcement of any patents or other intellectual property rights. The process of applying for and obtaining a patent is expensive, time-consuming and complex, and we may not be able to file, prosecute, maintain, enforce or license all necessary or

desirable patent applications at a reasonable cost, in a timely manner, or in all jurisdictions where protection may be commercially advantageous, or we may not be able to protect our proprietary rights at all. We may not be successful in protecting our proprietary rights, and unauthorized parties may be able to obtain and use information that we regard as proprietary.

We own numerous issued patents and pending patent applications. As of ~~September 30, 2022,~~March 31, 2023, we owned approximately 5453 U.S. patents, 3534 pending U.S. patent applications, 84124 issued foreign patents, and 8883 pending foreign and Patent Cooperation Treaty applications. The patent positions of medical device companies, including our patent position, may involve complex legal and factual questions, and therefore, the scope, validity and enforceability of any patent claims that we may obtain cannot be predicted with certainty.

Though an issued patent is presumed valid and enforceable, its issuance is not conclusive as to its validity or its enforceability and it may not provide us with adequate proprietary protection or competitive advantages against competitors with similar products. Patents, if issued, may be challenged, deemed unenforceable, invalidated or circumvented. Proceedings challenging our patents could result in either loss of the patent, or denial or the patent application or loss or reduction in the scope of one or more of the claims of the patent or patent application. In addition, such proceedings may be costly. Thus, any patents that we may own may not provide any protection against competitors. Furthermore, an adverse decision may result in a third party receiving a patent right sought by us, which in turn could affect our ability to commercialize our products.

Competitors could purchase our products and attempt to replicate or reverse engineer some or all of the competitive advantages we derive from our development efforts, willfully infringe our intellectual property rights, design around our patents, or develop and obtain patent protection for more effective technologies, designs or methods. We may be unable to prevent the unauthorized disclosure or use of our technical knowledge or trade secrets by consultants, suppliers, vendors, former employees and current employees. Further, the laws of some foreign countries do not protect our proprietary rights to the same extent as the laws of the United States, including the protection of surgical and medical methods, and we may encounter significant problems in protecting our proprietary rights in these countries.

In addition, proceedings to enforce or defend our patents could put our patents at risk of being invalidated, held unenforceable or interpreted narrowly. Such proceedings could also provoke third parties to assert claims against us, including that some or all of the claims in one or more of our patents are invalid or otherwise unenforceable. If any of our patents covering our products are invalidated or found unenforceable, or if a court found that valid, enforceable patents held by third parties covered one or more of our products, our competitive position could be harmed or we could be required to incur significant expenses to enforce or defend our rights.

The degree of future protection for our proprietary rights is uncertain, and we cannot ensure that:

Even if we are able to obtain patent protection, such patent protection may be of insufficient scope to achieve our business objectives. Issued patents may be challenged, narrowed, invalidated or circumvented. Decisions by courts and governmental patent agencies may

introduce uncertainty in the enforceability or scope of patents owned by or licensed to us. Furthermore, the issuance of a patent does not give us the right to practice the patented invention. Third parties may have blocking patents that could prevent us from marketing our own products and practicing our own technology. Alternatively, third parties may seek approval or certification to market their own products similar to or otherwise competitive with our products. In these circumstances, we may need to defend or assert our patents, including by filing lawsuits alleging patent infringement. In any of these types of proceedings, a court or agency with jurisdiction may find our patents invalid, unenforceable or not infringed; competitors may then be able to market products and use manufacturing and analytical processes that are substantially similar to ours. Even if we have valid and enforceable patents, these patents still may not provide protection against competing products or processes sufficient to achieve our business objectives.

Obtaining and maintaining patent protection depends on compliance with various procedural, document submission, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

The U.S. Patent and Trademark Office, or USPTO, and various foreign governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process. In addition, periodic maintenance fees on issued patents often must be paid to the USPTO and foreign patent agencies over the lifetime of the patent. While an unintentional lapse can in many cases be cured by payment of a late fee or by other means in accordance with the applicable rules, there are situations in which noncompliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. Even if a lapse is cured, reviving the patent or application, there is a risk that the revival can be challenged by third parties in proceeding and litigation, and that the revival can be overruled. Non-compliance events that could result in abandonment or lapse of a patent or patent application include failure to respond to official actions within prescribed time limits, non-payment of fees and failure to properly legalize and submit formal documents. If we fail to maintain the patents and patent applications covering our products, we may not be able to stop a competitor from marketing products that are the same as or similar to our products, which would have a material adverse effect on our business.

Changes in patent law could diminish the value of patents in general, thereby impairing our ability to protect our existing and future products.

~~Patent reform legislation may pass in the future that~~Future changes to existing patent law could lead to uncertainties and increased costs surrounding the prosecution, enforcement and defense of our patents and applications. Furthermore, U.S. and foreign courts have made, and will likely continue to make, changes in how the patent laws in their respective jurisdictions are interpreted. In several recent patent cases, the U.S. Supreme Court has narrowed the scope of patent protection available or weakened the rights of patent owners in certain situations. We cannot predict future changes in the interpretation of patent laws and regulations or changes to patent laws and regulations that might be enacted into law by U.S. and foreign legislative bodies and patent offices. Those changes may materially affect our ability to obtain additional patent protection in the future, the value of our patents, and our ability to enforce our patents.

If we cannot license and maintain rights to use third-party technology on reasonable terms, we may not be able to successfully commercialize our products. Our licensed or acquired technology may lose value or utility or over time.

In the past, we have licensed technology from third parties and may choose or need to do so in the future, including to develop or commercialize new products or services. We may also need to negotiate licenses to patents or patent applications before or after introducing a commercial product, and we may not be able to obtain necessary licenses to such patents or patent applications. If we are unable to enter into the necessary licenses on acceptable terms or at all, if any necessary licenses are subsequently terminated, if the licensors fail to abide by the terms of the licenses or fail to prevent infringement by third parties, or if the licensed patents or other rights are found to be invalid or unenforceable, our business may suffer. In addition, any technology licensed or acquired by us may lose value or utility, including as a result of a change of in the industry, in our business objectives, others’ technology, our dispute with the licensor, and other circumstances outside our control. In return for the use of a third party’s technology, we may agree to pay the licensor royalties based on sales of our products or services. If we are unable to negotiate reasonable royalties or if we have to pay royalties on technology that becomes less useful for us or ceases to provide value to us, our profit margin will be reduced and we may suffer losses.

We may become a party to intellectual property litigation or administrative proceedings that could be costly and could interfere with our ability to sell and market our products.

The medical device industry has been characterized by extensive litigation regarding patents, trademarks, trade secrets, and other intellectual property rights, and companies in the industry have used intellectual property litigation to gain a competitive advantage. It is possible that U.S. and foreign patents and pending patent applications or trademarks controlled by third parties may be alleged to cover our products, or that we may be accused of misappropriating third parties’ trade secrets. Additionally, our products include components that we purchase from vendors, and may include design components that are outside of our direct control. Our competitors, many of which have substantially greater resources and have made substantial investments in patent portfolios, trade secrets, trademarks,

and competing technologies, may have applied for or obtained, or may in the future apply for or obtain, patents or trademarks that will prevent, limit or otherwise interfere with our ability to make, use, sell or export our products or to use our technologies or product names. Moreover, in recent years, individuals and groups that are non-practicing entities, commonly referred to as “patent trolls,” have purchased patents and other intellectual property assets for the purpose of making claims of infringement in order to extract settlements. From time to time, we may receive threatening letters, notices or “invitations to license,” or may be the subject of claims that our products and business operations infringe or violate the intellectual property rights of others. The defense of these matters can be time consuming, costly to defend in litigation, divert management’s attention and resources, damage our reputation and brand and cause us to incur significant expenses or make substantial payments. Vendors from whom we purchase hardware or software may not indemnify us in the event that such hardware or software is accused of infringing a third-party’s patent or trademark or of misappropriating a third-party’s trade secret.

Since patent applications are confidential for a period of time after filing, we cannot be certain that we were the first to file any patent application related to our products. Because of the confidential nature of patent applications, we do not know at any given time what patent applications are pending that may later issue as a patent and be asserted by a third party against us. Competitors may also contest our patents, if issued, by showing the patent examiner that the invention was not original, was not novel, or was invalid or unenforceable for other reasons. In litigation or administrative proceedings, a competitor could claim that our patents, if issued, are not valid for a number of reasons. If a court agrees, we would lose our rights to those challenged patents or have the scope of those rights narrowed.

In addition, we may in the future be subject to claims by our former employees or consultants asserting an ownership right in our patents, patent applications or other intellectual property, as a result of the work they performed on our behalf. Our general requirement that our employees and consultants and any other partners or collaborators who have access to our proprietary know-how, information or technology assign or grant similar rights to their inventions to us may not fully protect us from intellectual property claims. Additionally, we cannot be certain that we have executed such agreements with all parties who may have contributed to our intellectual property, nor can we be certain that our agreements with such parties will be upheld in the face of a potential challenge, that such agreements will adequately protect us, or that they will not be breached, for which we may not have an adequate remedy.

Any lawsuits relating to intellectual property rights could subject us to significant liability for damages and invalidate our proprietary rights. Any potential intellectual property litigation also could force us to do one or more of the following:

Any litigation or claim against us, even those without merit and even those where we prevail, may cause us to incur substantial costs, and could place a significant strain on our financial resources, divert the attention of management from our core business and harm our reputation. If we are found to infringe the intellectual property rights of third parties, we could be required to pay substantial damages, including third-party lost profits, the disgorgement of our profits, or substantial royalties (all of which may be increased, including three times the awarded damages, if we are found to willfully infringe third-party patents or trademarks or to have misappropriated trade secrets) and could be prevented from selling our products unless we obtain a license or are able to redesign our products to avoid

infringement. Any such license may not be available on reasonable terms, if at all, and there can be no assurance that we would be able to redesign our products in a way that would not infringe the intellectual property rights of others. Although patent, trademark, trade secret, and other intellectual property disputes in the medical device area are often settled through licensing or similar arrangements, costs associated with such arrangements may be substantial and could include ongoing royalties. If we do not obtain necessary licenses, we may not be able to redesign our products to avoid infringement. We could encounter delays in product introductions while we attempt to develop alternative methods or products, and these alternative methods or products may be less competitive, which could adversely affect our competitive business position. If we fail to obtain any required licenses or make any necessary changes to our products or

technologies, we may have to withdraw existing products from the market or may be unable to commercialize one or more of our products.

In addition, we generally indemnify our customers with respect to infringement by our products of the proprietary rights of third parties. However, third parties may assert infringement claims against our customers. These claims may require us to initiate or defend protracted and costly litigation on behalf of our customers, regardless of the merits of these claims. If any of these claims succeed or settle, we may be forced to pay damages or settlement payments on behalf of our customers or may be required to obtain licenses for the products they use. If we cannot obtain all necessary licenses on commercially reasonable terms, our customers may be forced to stop using our products.

Similarly, interference or derivation proceedings provoked by third parties or brought by the USPTO may be necessary to determine priority with respect to our patents, patent applications, trademarks or trademark applications. We may also become involved in other proceedings, such as reexamination, inter parties review, post grant review, derivation or opposition proceedings before the USPTO or other jurisdictional body relating to our intellectual property rights or the intellectual property rights of others. Adverse determinations in a judicial or administrative proceeding or failure to obtain necessary licenses could prevent us from manufacturing our products or using product names, which would have a significant adverse impact on our business, financial condition and results of operations.

Additionally, we may file lawsuits or initiate other proceedings to protect or enforce our patents or other intellectual property rights, which could be expensive, time consuming and unsuccessful. Competitors may infringe our issued patents or other intellectual property. To counter infringement or unauthorized use, we may be required to file infringement claims, which can be expensive and time-consuming. Any claims we assert against perceived infringers could provoke these parties to assert counterclaims against us alleging that we infringe their intellectual property. In addition, in a patent or other intellectual property infringement proceeding, a court may decide that a patent or other intellectual property of ours is invalid or unenforceable, in whole or in part, construe the patent’s claims or other intellectual property narrowly or refuse to stop the other party from using the technology at issue on the grounds that our patents or other intellectual property do not cover the technology in question. Furthermore, even if our patents or other intellectual property are found to be valid and infringed, a court may refuse to grant injunctive relief against the infringer and instead grant us monetary damages or ongoing royalties. Such monetary compensation may be insufficient to adequately offset the damage to our business caused by the infringer’s competition in the market. An adverse result in any litigation proceeding could put one or more of our patents or other intellectual property at risk of being invalidated or interpreted narrowly, which could adversely affect our competitive business position, financial condition and results of operations.

If we are unable to protect the confidentiality of our other proprietary information, our business and competitive position may be harmed.

In addition to patent protection, we also rely on protection of trade secrets, know-how and other proprietary information that is not patentable or that we elect not to patent. However, trade secrets can be difficult to protect and some courts are less willing or unwilling to protect trade secrets. To maintain the confidentiality of our trade secrets and proprietary information, we rely heavily on confidentiality provisions that we have in contracts with our employees, consultants, collaborators and others upon the commencement of their relationship with us. We cannot guarantee that we have entered into such agreements with each party that may have or have had access to our trade secrets or proprietary technology and processes. We may not be able to prevent the unauthorized disclosure or use of our technical knowledge or other trade secrets by such third parties, despite the existence generally of these confidentiality restrictions. These contracts may not provide meaningful protection for our trade secrets, know-how, or other proprietary information in the event the unwanted use is outside the scope of the provisions of the contracts or in the event of any unauthorized use, misappropriation, or disclosure of such trade secrets, know-how, or other proprietary information. There can be no assurance that such third parties will not breach their agreements with us, that we will have adequate remedies for any breach, or that our trade secrets will not otherwise become known or independently developed by competitors. The protections we place on our intellectual property or other proprietary rights may not be sufficient. Monitoring unauthorized use and disclosure of our intellectual property is difficult, and we do not know whether the steps we have taken to protect our intellectual property or other proprietary rights will be adequate. In addition, the laws of many foreign countries will not protect our intellectual property or other proprietary rights to the same extent as the laws of the United States. Consequently, we may be unable to prevent our proprietary technology from being exploited abroad, which could affect our ability to expand to international markets or require costly efforts to protect our technology. To the extent our intellectual property or other proprietary information protection is incomplete, we are exposed to a greater risk of direct competition. A third party could, without authorization, copy or otherwise obtain and use our products or technology, or develop similar technology. Our competitors could

purchase our products and attempt to replicate some or all of the competitive advantages we derive from our development efforts or design around our protected technology. Our failure to secure, protect and enforce our intellectual property rights could substantially harm the value of our products, brand and business. The theft or unauthorized use or publication of our trade secrets and other confidential business information could reduce the differentiation of our products and harm our business, the value of our investment in development or business acquisitions could be reduced and third parties might make claims against us related to losses of their

confidential or proprietary information. Any of the foregoing could materially and adversely affect our business, financial condition and results of operations.

Further, it is possible that others will independently develop the same or similar technology or products or otherwise ~~obtain access to~~work around our ~~unpatented~~patented technology, and in such cases we could not assert any trade secret rights against such parties. Costly and time-consuming litigation could be necessary to enforce and determine the scope of our trade secret rights and related confidentiality and nondisclosure provisions. If we fail to obtain or maintain trade secret protection, or if our competitors obtain our trade secrets or independently develop technology or products similar to ours or competing technologies or products, our competitive market position could be materially and adversely affected.

We also seek to preserve the integrity and confidentiality of our data and other confidential information by maintaining physical security of our premises and physical and electronic security of our information technology systems. While we have confidence in these individuals, organizations and systems, agreements or security measures may be breached and detecting the disclosure or misappropriation of confidential information and enforcing a claim that a party illegally disclosed or misappropriated confidential information is difficult, expensive and time-consuming, and the outcome is unpredictable. Further, we may not be able to obtain adequate remedies for any breach.

We may not be able to protect our intellectual property rights throughout the world.

A company may attempt to commercialize competing products utilizing our proprietary design, trademarks or trade names in foreign countries where we do not have any patents or patent applications and where legal recourse may be limited. This may have a significant commercial impact on our foreign business operations.

Filing, prosecuting and defending patents or trademarks on our current and future products in all countries throughout the world would be prohibitively expensive. The requirements for patentability and trademarking may differ in certain countries, particularly developing countries. The laws of some foreign countries do not protect intellectual property rights including the protection of surgical and medical methods, to the same extent as laws in the United States. Consequently, we may not be able to prevent third parties from utilizing our inventions and trademarks in all countries outside the United States. Competitors may use our technologies or trademarks in jurisdictions where we have not obtained patent or trademark protection to develop or market their own products and further, may export otherwise infringing products to territories where we have patent and trademark protection, but enforcement on infringing activities is inadequate. These products or trademarks may compete with our products or trademarks, and our patents, trademarks or other intellectual property rights may not be effective or sufficient to prevent them from competing.

Many companies have encountered significant problems in protecting and defending intellectual property rights in foreign jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents, trademarks and other intellectual property protection, which could make it difficult for us to stop the infringement of our patents and trademarks or marketing of competing products in violation of our proprietary rights generally. Proceedings to enforce our patent and trademarks rights in foreign jurisdictions could result in substantial costs and divert our efforts and attention from other aspects of our business, could put our patents and trademarks in those jurisdictions, as well as elsewhere at risk of being invalidated or interpreted narrowly and our patent or trademark applications at risk, and could provoke third parties to assert claims against us. We may not prevail in any lawsuits that we initiate and the damages or other remedies awarded, if any, may not be commercially meaningful. Certain countries in Europe and certain developing countries, including India and China, have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. In those countries, we may have limited remedies if our patents are infringed or if we are compelled to grant a license to our patents to a third party, which could materially diminish the value of those patents. This could limit our potential revenue opportunities. Accordingly, our efforts to enforce our intellectual property rights around the world may be inadequate to obtain a significant commercial advantage from the intellectual property that we own or license. Finally, our ability to protect and enforce our intellectual property rights may be adversely affected by unforeseen changes in foreign intellectual property laws.

We may be subject to claims that we or our employees have misappropriated the intellectual property of a third party, including trade secrets or know-how, or are in breach of non-competition or non-solicitation agreements with our competitors.

Many of our employees and consultants were previously employed at or engaged by other medical device or other biotechnology companies, including our competitors or potential competitors. Some of these employees, consultants and contractors, may have executed proprietary rights, non-disclosure and non-competition agreements in connection with such previous employment. Our efforts to ensure that our employees and consultants do not use the intellectual property, proprietary information, know-how or trade secrets of

others in their work for us may not be successful, and we may be subject to claims that we or these individuals have, inadvertently or otherwise, misappropriated the intellectual property or disclosed the alleged trade secrets or other proprietary information, of these former employers or competitors.

Additionally, we may be subject to claims from third parties challenging our ownership interest in intellectual property we regard as our own, based on claims that our employees or consultants have breached an obligation to assign inventions to another employer, to a former employer, or to another person or entity. Litigation may be necessary to defend against any other claims, and it may be necessary or we may desire to enter into a license to settle any such claim; however, there can be no assurance that we would be able to obtain a license on commercially reasonable terms, if at all. If our defense to those claims fails, in addition to paying monetary damages, a court could prohibit us from using technologies or features that are essential to our products, if such technologies or features are found to incorporate or be derived from the trade secrets or other proprietary information of the former employers. An inability to incorporate technologies or features that are important or essential to our products could have a material adverse effect on our business, financial condition and results of operations, and may prevent us from selling our products. In addition, we may lose valuable intellectual property rights or personnel. Even if we are successful in defending against these claims, litigation could result in substantial costs and could be a distraction to management. Any litigation or the threat thereof may adversely affect our ability to hire employees or contract with independent sales representatives. A loss of key personnel or their work product could hamper or prevent our ability to commercialize our products, which could have an adverse effect on our business, financial condition and results of operations.

The failure of third parties to meet their contractual, regulatory, and other obligations could adversely affect our business.

We rely on suppliers, vendors, outsourcing partners, consultants, alliance partners and other third parties to research, develop, manufacture and commercialize our products and manage certain parts of our business. Using these third parties poses a number of risks, such as:

Moreover, some third parties are located in markets subject to political and social risk, corruption, infrastructure problems and natural disasters, in addition to country-specific privacy and data security risk given current legal and regulatory environments. Failure of third parties to meet their contractual, regulatory, and other obligations may materially affect our business.

We are jointly developing certain technologies with Oertli Instrumente AG, or Oertli, and our agreements with Oertli may restrict our freedom to practice and may not protect us against potential competition with respect to jointly-developed intellectual property.

We have entered into development and supply agreements with Oertli pursuant to which we are collaborating on the development and supply of the phacoemulsification component in our ALLY System. Under these agreements, intellectual property invented individually by either party is owned exclusively by such party and intellectual property jointly developed by us and Oertli will be jointly and severally owned by us and Oertli, and by the terms of our agreements, we and Oertli are entitled to practice such jointly owned intellectual property in our respective sole discretion. Our agreements with Oertli do not restrict how individually or jointly developed intellectual property may be used, exploited, or enforced. With respect to jointly developed intellectual property, both parties will be subject to default rules under the laws of various countries pertaining to joint ownership. Some countries require the consent of all joint owners to exploit, license or assign jointly owned patents, and if either party is unable to obtain that consent from the other party, the party requesting consent may be unable to exploit the invention or to license or assign its rights under these patents and patent applications in those countries. Additionally, in the United States, the other party may be required to be joined as a party to any claim or action a party may wish to bring to enforce these patent rights, which may limit its ability to pursue third party infringement claims. In some countries, Oertli will have a right to develop and commercialize products and technology invented during the course of our agreements, and to license to third parties the right to do so. This may lead to the development and commercialization of products and technology by others that are based on technology similar to our ALLY System, which may impair our competitive position in the

marketplace and have an adverse impact on our business. If we cannot obtain distribution rights for such jointly-owned intellectual property or Oertli-owned intellectual property, our future product development and commercialization plans and competitive position

in our industry may be adversely affected, which may have a material adverse impact on our business, financial condition and results of operation.

If our trademarks and trade names are not adequately protected, then we may not be able to build name recognition in our markets and our business may be adversely affected.

We rely on trademarks, service marks, trade names and brand names to distinguish our products from the products of our competitors, and have registered or applied to register many of these trademarks. ~~We cannot assure you~~It is possible that some of our trademark applications ~~will~~may not be approved. During trademark registration proceedings, we may receive rejections. Although we are given an opportunity to respond to those rejections, we may be unable to overcome such rejections. In addition, in proceedings before the USPTO and comparable agencies in many foreign jurisdictions, third parties are given an opportunity to oppose pending trademark applications and to seek to cancel registered trademarks. Opposition or cancellation proceedings may be filed against our trademarks, and our trademarks may not survive such proceedings. In the event that our trademarks are successfully challenged, we could be forced to rebrand our products, which could result in loss of brand recognition and could require us to devote resources towards advertising and marketing new brands. At times, competitors may adopt trade names or trademarks similar to ours, thereby impeding our ability to build brand identity and possibly leading to market confusion. Certain of our current or future trademarks may become so well known by the public that their use becomes generic and they lose trademark protection. Over the long term, if we are unable to establish name recognition based on our trademarks and trade names, then we may not be able to compete effectively and our business, financial condition and results of operations may be adversely affected.

The large number of shares eligible for public sale could depress the market price of our common stock.

Members of our management and our board of directors hold a significant portion of our common stock and may sell their shares of our common stock to the extent not restricted by contract or under securities laws. We have filed a registration statement registering shares that we may issue under our equity compensation plan and employee stock purchase plan, and may file additional registration statements relating to shares or awards held by our management and board of directors in the future. The market price of our common stock could decline as a result of sales of a large number of shares of our common stock in the market, and the perception that these sales could occur may also depress the market price of our common stock. A decline in the price of shares of our common stock might impede our ability to raise capital through the issuance of additional shares of our common stock or other equity securities.

We also may issue our shares of common stock from time to time as consideration for future acquisitions and investments. If any such acquisition or investment is significant, the number of shares that we may issue may in turn be significant. In addition, we may also grant registration rights covering those shares in connection with any such acquisitions and investments.

We are an “emerging growth company” and a “smaller reporting company” and we cannot be certain if the reduced disclosure requirements applicable to us will make our common stock less attractive to investors.

We are an “emerging growth company,” as defined in the JOBS Act, and we may take advantage of certain exemptions and relief from various reporting requirements that are applicable to other public companies that are not “emerging growth companies.” In particular, while we are an “emerging growth company” (1) we will not be required to comply with the auditor attestation requirements of Section 404(b) of the Sarbanes-Oxley Act, (2) we will be exempt from any rules that may be adopted by the Public Company Accounting Oversight Board requiring mandatory audit firm rotations or a supplement to the auditor’s report on financial statements, (3) we will be subject to reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements and (4) we will not be required to hold non-binding advisory votes on executive compensation or stockholder approval of any golden parachute payments not previously approved.

In addition, we are eligible to delay the adoption of new or revised accounting standards applicable to public companies until those standards apply to private companies, and as a result, we may not comply with new or revised accounting standards on the relevant dates on which adoption of such standards is required for non-emerging growth companies. As a result of this election, our financial statements may not be comparable to the financial statements of other public companies.

We also currently intend to take advantage of the reduced disclosure requirements regarding executive compensation. We are also entitled to take advantage of other exemptions, including the exemptions from the advisory vote requirements and executive compensation disclosures under the Dodd-Frank Wall Street Reform and Customer Protection Act, and the exemption from the provisions of Section 404(b) of the Sarbanes-Oxley Act. We may remain an “emerging growth company” until as late as December 31, 2025 (the fiscal year-end following the fifth anniversary of the completion of the spin-off), though we may cease to be an “emerging

growth company” earlier under certain circumstances, including (1) if the market value of our common stock that is held by non-affiliates

exceeds $700.0 million as of any June 30, in which case we would cease to be an “emerging growth company” as of December 31, (2) if our gross revenue exceeds ~~$1.07~~$1.235 billion in any fiscal year or (3) if we issue more than $1.0 billion in nonconvertible notes in any three-year period.

We are also a “smaller reporting company” as defined in the Exchange Act. We may continue to be a smaller reporting company even after we are no longer an emerging growth company. We may take advantage of certain of the scaled disclosures available to smaller reporting companies and will be able to take advantage of these scaled disclosures for so long as our voting and non-voting common stock held by non-affiliates is less than $250.0 million measured on the last business day of our second fiscal quarter, or our annual revenue is less than $100.0 million during the most recently completed fiscal year and our voting and non-voting common stock held by non-affiliates is less than $700.0 million measured on the last business day of our second fiscal quarter.

If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may decline or become more volatile.

We have entered into an agreement to issue shares of convertible preferred stock, and may in the future issue additional shares of preferred stock, with terms that could dilute the voting power or reduce the value of our common stock.

~~While we have no specific plan to issue preferred stock, our~~Our amended and restated certificate of incorporation authorizes us to issue, without the approval of our stockholders, one or more series of preferred stock having such designation, powers, privileges, preferences, including preferences over our common stock respecting dividends and distributions, terms of redemption and relative participation, optional, or other rights, if any, of the shares of each such series of preferred stock and any qualifications, limitations or restrictions thereof, as our board of directors may determine. The terms of one or more series of preferred stock could dilute the voting power or reduce the value of our common stock. For example, the repurchase or redemption rights or liquidation preferences we could assign to holders of preferred stock could affect the residual value of the common stock.

Pursuant to the SPA dated as of May 12, 2023, by and between the Company and NR-GRI, we intend to issue an aggregate of 20,000 shares of a newly established series of preferred stock designated as “Series A Convertible Preferred Stock, par value $0.01 per share,” which have a stated value of $1,000 per share and are convertible into shares of common stock. Holders of shares of convertible preferred stock will be entitled to vote on an as-converted basis with holders of shares of common stock. The convertible preferred stock will rank senior to the common stock as to distributions and payments upon the liquidation, dissolution and winding up of the Company, and holders of convertible preferred stock will participate with the holders of the common stock on an as-converted basis to the extent any dividends are declared on common stock. Holders of convertible preferred stock will also be entitled to redemption rights under certain circumstances. The redemption rights and liquidation preferences we plan to assign to holders of the convertible preferred stock, and any other repurchase or redemption rights or liquidation preferences we may assign to holders of preferred stock in the future, could affect the residual value of the common stock.

We do not anticipate paying cash dividends, and accordingly, stockholders must rely on stock appreciation for any return on their investment.

We do not anticipate paying cash dividends in the foreseeable future. As a result, only appreciation of the price of our common stock, which may never occur, will provide a return to stockholders. Investors seeking cash dividends should not invest in our common stock.

Certain provisions in our charter documents and Delaware law could discourage takeover attempts and lead to management entrenchment and, therefore, may depress the trading price of our common stock.

Our amended and restated certificate of incorporation and amended and restated bylaws contain provisions that could have the effect of delaying or preventing changes in control or changes in our management without the consent of our board of directors, including, among other things:

These provisions may not be successful in protecting our stockholders from coercive or harmful takeover tactics by requiring potential acquirers to negotiate with our board of directors and by providing our board of directors with adequate time to assess any acquisition proposal. These provisions in our amended and restated certificate of incorporation and amended and restated bylaws may discourage, delay or prevent a transaction involving a change in control that is in the best interest of our stockholders. Even in the absence of a takeover attempt, the existence of these provisions may adversely affect the prevailing market price of our common stock if they are viewed as discouraging future takeover attempts.

We are also subject to certain anti-takeover provisions under the Delaware General Corporation Law, or DGCL. Under the DGCL, a corporation may not, in general, engage in a business combination with any holder of 15% or more of its capital stock unless the holder has held the stock for three years or, among other things, our board of directors has approved the transaction.

Our amended and restated certificate of incorporation designates certain courts as the sole and exclusive forums for certain litigation that may be initiated by our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us.

Our amended and restated certificate of incorporation provides that, unless we consent in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware shall be the sole and exclusive forum for (i) any derivative action or proceeding brought on our behalf; (ii) any action asserting a claim of breach of fiduciary duty owed by any of our directors, officers or other employees or our stockholders; (iii) any action asserting a claim arising pursuant to any provision of the DGCL or our amended and restated certificate of incorporation or amended and restated bylaws; or (iv) any action asserting a claim governed by the internal affairs doctrine. Additionally, our amended and restated certificate of incorporation provides that the federal district courts of the United States of America will be the exclusive forum for the resolution of any complaint asserting a cause of action against us or any of our directors, officers, employees or agents and arising under the Securities Act. Our amended and restated certificate of incorporation further provides that any person or entity purchasing or acquiring any interest in shares of our capital stock shall be deemed to have notice of and to have consented to the provisions described above. This forum selection provision in our amended and restated certificate of incorporation may limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us. This exclusive forum provision will not apply to suits brought to enforce a duty or liability created by the Exchange Act or any other claim for which the federal courts have exclusive jurisdiction.

An active, liquid and orderly market for our common stock may not develop or be sustained, and the trading price of our common stock is likely to be volatile.

An active trading market for our common stock may not develop or be sustained, which could depress the market price of our common stock and could affect your ability to sell your shares. The trading price of our common stock is likely to be highly volatile and could be subject to wide fluctuations in response to various factors, some of which are beyond our control. In addition to the factors discussed in this “Risk Factors” section of this Quarterly Report, these factors include:

In addition, the stock market in general, and the market for medical device companies in particular, have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of those companies. This could limit or prevent investors from readily selling their shares of common stock and may otherwise negatively affect the liquidity of our common stock. Securities class action litigation has often been instituted against companies following periods of volatility in the overall market and in the market price of a company’s securities. This litigation, if instituted against us, could result in very substantial costs, divert our management’s attention and resources, and could have a material adverse effect on our business, financial condition and results of operations.

We are obligated to develop and maintain proper and effective internal control over financial reporting and will be subject to other requirements that will be burdensome and costly.

As a public company, we are required to file with the SEC annual, quarterly and current reports that are specified in Section 13 of the Exchange Act. We are required to prepare financial statements that are fully compliant with all SEC reporting requirements on a timely basis. In addition, we are subject to other reporting and corporate governance requirements, including the requirements of the Nasdaq Stock Market, or Nasdaq, and certain provisions of the Sarbanes-Oxley Act and the regulations promulgated thereunder, which impose significant compliance obligations upon us. ~~As a public company, we are required to:~~

We expect to continue to devote significant resources and time to comply with the internal control over financial reporting requirements of the Sarbanes-Oxley Act, including costs associated with auditing and legal fees and accounting and administrative staff. In addition, Section 404(a) under the Sarbanes-Oxley Act requires that we assess the effectiveness of our controls over financial reporting. Our future compliance with the annual internal control report requirement will depend on the effectiveness of our financial reporting and data systems and controls across our operating subsidiaries. We cannot be certain that these measures will ensure that we design, implement and maintain adequate controls over our financial processes and reporting in the future. Any failure to implement required new or improved controls, or difficulties encountered in their implementation or operation, could harm our operating results, cause us to fail to meet our financial reporting obligations, or cause us to suffer adverse regulatory consequences or violate applicable stock exchange listing rules. Inadequate internal controls could also cause investors to lose confidence in our reported financial information, which could have a negative effect on the trading price of our stock and our access to capital.

For as long as we are an “emerging growth company” under the JOBS Act, we will not be required to comply with Section 404(b) of the Sarbanes-Oxley Act, which would require our independent auditors to issue an opinion on their audit of our internal control over financial reporting, until the later of the year following our first annual report required to be filed with the SEC and the date we are no longer an “emerging growth company.” If, once we are no longer an “emerging growth company,” our independent registered public accounting firm cannot provide an unqualified attestation report on the effectiveness of our internal control over financial reporting, investor confidence and, in turn, the market price of our common stock, could decline.

Our disclosure controls and procedures may not prevent or detect all errors or acts of fraud.

We are subject to the periodic reporting requirements of the Exchange Act. The design of our disclosure controls and procedures can only provide reasonable assurance that information we must disclose in reports we file or submit under the Exchange Act is accumulated and communicated to management, and recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC.

These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people or by an unauthorized override of the controls. Accordingly, because of the inherent limitations in our control system, misstatements due to error or fraud may occur and not be detected.

If securities or industry analysts do not continue to publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could decline.

The trading market for our common stock depends in part on the research and reports that securities or industry analysts publish about us or our business. If one or more of the analysts who cover us were to downgrade our stock or publish inaccurate or unfavorable research about our business, our stock price would likely decline. If one or more of these analysts were to cease coverage of us or fail to publish reports on us regularly, demand for our stock could decrease, which might cause our stock price and trading volume to ~~decline.~~decline and may also impair our ability to expand our business with existing customers and attract new customers.

Increasing scrutiny and stakeholder expectations regarding environmental, social, and governance matters may cause us to incur expenses and liabilities or otherwise adversely impact our business, financial condition, or operations.

Companies across industries are facing increasing scrutiny from a variety of stakeholders related to their environmental, social, and governance (“ESG”) practices. Expectations regarding voluntary ESG initiatives and disclosures may result in increased costs (including but not limited to increased costs related to compliance, stakeholder engagement, contracting and insurance), changes in demand for certain offerings, enhanced compliance or disclosure obligations, or other adverse impacts to our business, financial condition, or results of operations.

While we may at times engage in voluntary initiatives (such as voluntary disclosures, certifications, or goals, among others) or commitments to improve the ESG profile of our Company and/or offerings, such initiatives or achievements of such commitments may be costly and may not have the desired effect. For example, certain statements in our voluntary disclosures may be based on assumptions, estimates, hypothetical expectations, or third-party information. Additionally, expectations around the Company’s management of ESG matters continues to evolve rapidly, in many instances due to factors that are out of our control. In addition, we may commit to certain initiatives or goals and we may not ultimately be able to achieve such commitments or goals due to factors that are within or outside of our control. Moreover, actions or statements that we may take based on based on expectations, assumptions, or third-party information that we currently believe to be reasonable may subsequently be determined to be erroneous or be subject to misinterpretation. Even if this is not the case, our current actions may subsequently be determined to be insufficient by various stakeholders, and we may be subject to investor or regulator engagement on our ESG initiatives and disclosures, even if such initiatives are currently voluntary.

+ Certain schedules and attachments to certain of these exhibits have been omitted pursuant to Regulation S-K, Item 601(a)(5).

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.


Delaware	32-0125724
(State or other jurisdiction of incorporation or organization)	(I.R.S. Employer Identification No.)


Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common Stock, par value $0.01 per share	LNSR	The Nasdaq Stock Market LLC


		Page
	Forward-Looking Statements	iii
	Risk Factor Summary	v
PART I – FINANCIAL INFORMATION		1
Item 1.	Financial Statements	1
	Condensed Statements of Operations (Unaudited)	1
	Condensed Balance Sheets (Unaudited)	2
	Condensed Statements of Cash Flows (Unaudited)	3
	Condensed Statements of Changes in Stockholders’ Equity (Unaudited)	5
	Notes to the Condensed Financial Statements (Unaudited)	6
Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	1718
Item 3.	Quantitative and Qualitative Disclosures About Market Risk	2726
Item 4.	Controls and Procedures	2726
PART II – OTHER INFORMATION		2827
Item 1.	Legal Proceedings	2827
Item 1A.	Risk Factors	2827
Item 2.	Unregistered Sales of Equity Securities and Use of Proceeds	6465
Item 3.	Defaults Upon Senior Securities	6465
Item 4.	Mine Safety Disclosures	65
Item 5.	Other Information	65
Item 6.	Exhibits	66
Signatures		67


	As of September 30, 2022		As of December 31, 2021		As of March 31, 2023		As of December 31, 2022
Finished Goods	$	2,467	$	4,319	$	5,397	$	4,002
Work-in-process		1,492		173		1,912		797
Raw Materials		3,931		1,996		8,359		6,941
Total	$	7,890	$	6,488	$	15,668	$	11,740


	Restricted Stock Awards Outstanding					Restricted Stock Awards Outstanding
	Number of Units			Weighted Average Grant Date Fair Value Per Share		Number of Units			Weighted Average Grant Date Fair Value Per Share
Non-vested at December 31, 2021		1,332		$	10.29
Non-vested at December 31, 2022							622		$	10.29
Restricted stock awards granted		—		$	—		—		$	—
Restricted stock awards vested		(591	)	$	10.30		(237	)	$	10.20
Restricted stock awards cancelled		(6	)	$	10.81		(5	)	$	10.81
Non-vested at September 30, 2022		735		$	10.28
Non-vested at March 31, 2023							380		$	10.34


Large accelerated filer	☐	Accelerated Filer	☐
Non-accelerated filer	☒	Smaller reporting company	☒
		Emerging growth company	☒


	Restricted Stock Units Outstanding
	Number of Units		Weighted Average Grant Date Fair Value Per Share
Non-vested at December 31, 2021		—	$	—
Restricted stock units granted		86	$	6.33
Restricted stock units vested		—	$	—
Restricted stock units cancelled		—	$	—
Non-vested at September 30, 2022		86	$	6.33


Date: ~~November 9, 2022~~May 15, 2023	By:	/s/ NICHOLAS T. CURTIS
		Nicholas T. Curtis
		Chief Executive Officer
		(Principal Executive Officer)



Date: ~~November 9, 2022~~May 15, 2023			/s/ THOMAS R. STAAB, II
			Thomas R. Staab, II
			Chief Financial Officer
			(Principal Financial Officer)

Date: ~~November 9, 2022~~May 15, 2023			/s/ KENDRA W. WONG
			Kendra W. Wong
			Principal Accounting Officer
			(Principal Accounting Officer)