UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark One)

For the quarterly period ended JuneSeptember 30, 2020

or

For the transition period from       to

Commission file number: 001-16465

Retractable Technologies, Inc.

(Exact name of registrant as specified in its charter)

(972) 294-1010

(Registrant’s telephone number, including area code)

(Former name, former address, and former fiscal year, if changed since last report)

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes xþ No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes xþ No ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.   ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes   ¨No xþ

APPLICABLE ONLY TO ISSUERS INVOLVED IN BANKRUPTCY

PROCEEDINGS DURING THE PRECEDING FIVE YEARS:

Indicate by check mark whether the registrant has filed all documents and reports required to be filed by Sections 12, 13, or 15(d) of the Securities Exchange Act of 1934 subsequent to the distribution of securities under a plan confirmed by a court. Yes ¨  No

APPLICABLE ONLY TO CORPORATE ISSUERS

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date: 33,037,20433,816,604 shares of Common Stock, no par value, issued and outstanding on August 3,November 2, 2020.

RETRACTABLE TECHNOLOGIES, INC.

FORM 10-Q

For the Quarterly Period Ended JuneSeptember 30, 2020

TABLE OF CONTENTS

PART I – FINANCIAL INFORMATION

PART I—FINANCIAL INFORMATION

RETRACTABLE TECHNOLOGIES, INC.

CONDENSED BALANCE SHEETS

(unaudited)

See accompanying notes to condensed unaudited financial statements

RETRACTABLE TECHNOLOGIES, INC.

CONDENSED STATEMENTS OF OPERATIONS

(unaudited)

See accompanying notes to condensed unaudited financial statements

RETRACTABLE TECHNOLOGIES, INC.

CONDENSED STATEMENTS OF CASH FLOWS

(unaudited)

See accompanying notes to condensed unaudited financial statements

RETRACTABLE TECHNOLOGIES, INC.

CONDENSED STATEMENTS OF CHANGES IN STOCKHOLDERS’ EQUITY

(unaudited)

The following shows the changes in stockholders’ equity for the three-month period ended JuneSeptember 30, 2020:

The following shows the changes in stockholders’ equity for the three-month period ended JuneSeptember 30, 2019:

The following shows the changes in stockholders’ equity for the six-monthnine-month period ended JuneSeptember 30, 2020:

The following shows the changes in stockholders’ equity for the six-monthnine-month period ended JuneSeptember 30, 2019:

See accompanying notes to condensed unaudited financial statements

RETRACTABLE TECHNOLOGIES, INC.

NOTES TO CONDENSED FINANCIAL STATEMENTS

(unaudited)

Business of the Company

Retractable Technologies, Inc. (the “Company”) was incorporated in Texas on May 9, 1994, and designs, develops, manufactures, and markets safety syringes and other safety medical products for the healthcare profession. The Company began to develop its manufacturing operations in 1995. The Company’s manufacturing and administrative facilities are located in Little Elm, Texas. The Company’s products are the VanishPoint^® 0.5mL insulin syringe; 1mL tuberculin, insulin, and allergy antigen syringes; 0.5mL, 1mL, 2mL, 3mL, 5mL, and 10mL syringes; the blood collection tube holder; the small diameter tube adapter; the allergy tray; the IV safety catheter; the Patient Safe^® syringes; the Patient Safe^® Luer Cap; the VanishPoint^® Blood Collection Set; and the EasyPoint^® needle as well as a standard 3mL syringe packaged with an EasyPoint^®needle. The Company also sells VanishPoint^® autodisable syringes in the international market in addition to the Company’s other products.

Basis of presentation

The accompanying condensed financial statements are unaudited and, in the opinion of Management, reflect all adjustments that are necessary for a fair presentation of the financial position and results of operations for the periods presented. All such adjustments are of a normal and recurring nature. The results of operations for the periods presented are not necessarily indicative of the results to be expected for the entire year. The unaudited condensed financial statements should be read in conjunction with the financial statement disclosures contained in the Company’s audited financial statements incorporated into its Form 10-K filed on March 30, 2020 for the year ended December 31, 2019.

Accounting estimates

The preparation of financial statements in conformity with U.S. generally accepted accounting principles (“GAAP”) requires Management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ significantly from those estimates.

Cash and cash equivalents

For purposes of reporting cash flows, cash and cash equivalents include cash, money market accounts, and investments with original maturities of three months or less.

Accounts receivable

The Company records trade receivables when revenue is recognized. No product has been consigned to customers. The Company’s allowance for doubtful accounts is primarily determined by review of specific trade receivables. Those accounts that are doubtful of collection are included in the allowance. This provision is reviewed to determine the adequacy of the allowance for doubtful accounts. Trade receivables are charged off when there is certainty as to their being uncollectible. Trade receivables are considered delinquent when payment has not been made within contract terms. The Allowance for bad debt was $271 thousand and $147 thousand as of JuneSeptember 30, 2020 and December 31, 2019, respectively.

The Company requires certain customers to make a prepayment prior to beginning production or shipment of their order. Customers may apply such prepayments to their outstanding invoices or pay the invoice and

continue to carry forward the deposit for future orders. Such amounts are included in Other accrued liabilities on the Condensed Balance Sheets and are shown in Note 6, Other Accrued Liabilities.

The Company records an allowance for estimated returns as a reduction to Accounts receivable and Gross sales. Historically, returns have been insignificant.

Inventories

Inventories are valued at the lower of cost or net realizable value, with cost being determined using actual average cost. The Company compares the average cost to the net realizable value and records the lower value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. Management considers such factors as the amount of inventory on hand and in the distribution channel, estimated time to sell such inventory, the shelf life of inventory, and current market conditions when determining excess or obsolete inventories. A reserve is established for any excess or obsolete inventories or they may be written off.

Investments in debt and equity securities

The Company holds high-grade exchange-traded and closed-end funds (ETFs), mutual funds, equity securities, and debt securities as investments. These assets are readily marketable and are carried at fair value as of the date of the Condensed Balance Sheets. Net unrealized and realized gains or losses on investments in debt and equity securities are reflected as a component of Interest and other income. Realized gains or losses on investments in debt and equity securities are recognized using the specific identification method.

Property, plant, and equipment

Property, plant, and equipment are stated at cost. Expenditures for maintenance and repairs are charged to operations as incurred. Cost includes major expenditures for improvements and replacements which extend useful lives or increase capacity and interest cost associated with significant capital additions. Gains or losses from disposals are included in operations.

The Company's property, plant, and equipment primarily consist of buildings, land, assembly equipment, molding machines, molds, office equipment, furniture, and fixtures. Depreciation and amortization are calculated using the straight-line method over the following useful lives:

Long-lived assets

The Company assesses the recoverability of long-lived assets using an assessment of the estimated undiscounted future cash flows related to such assets. In the event that assets are found to be carried at amounts which are in excess of estimated gross future cash flows, the assets will be adjusted for impairment to a level commensurate with fair value determined using a discounted cash flow analysis or appraised values of the underlying assets.

Fair value measurements

For assets and liabilities that are measured using quoted prices in active markets, total fair value is the published market price per unit multiplied by the number of units held without consideration of transaction costs. Assets and liabilities that are measured using significant other observable inputs are valued by reference to similar assets or liabilities, adjusted for contract restrictions and other terms specific to that asset or liability. For these items, a significant portion of fair value is derived by reference to quoted prices of similar assets or

liabilities in active markets. For all remaining assets and liabilities, fair value is derived using a fair value model, such as a discounted cash flow model or Black-Scholes model.

Financial instruments

The Company estimates the fair value of financial instruments through the use of public market prices, quotes from financial institutions, and other available information. Judgment is required in interpreting data to develop estimates of fair value and, accordingly, amounts are not necessarily indicative of the amounts that could be realized in a current market exchange. Short-term financial instruments, including cash and cash equivalents, accounts receivable, accounts payable, and other liabilities, consist primarily of instruments without extended maturities, the fair value of which, based on Management's estimates, equals their recorded values. Investments in equity securities consist primarily of individual equity securities, exchange-traded and closed-end funds, and mutual funds and are reported at their fair value based upon quoted prices in active markets. Investments in U.S. Treasury Notes are reported at their fair value based upon quoted prices in active markets. Investments in certificates of deposit (CD) with original maturities of greater than three months are reported at their estimated fair value based upon the duration of the CD and the interest rate earned on the CD versus current interest rates of similar duration CDs. The fair value of long-term liabilities, based on Management’s estimates, approximates their reported values.

Concentration risks

The Company’s financial instruments exposed to concentrations of credit risk consist primarily of cash, cash equivalents, certificates of deposit, U.S. Treasury Notes, exchange-traded and closed-end funds, mutual funds, equity securities, and accounts receivable. Cash balances, some of which exceed federally insured limits, are maintained in financial institutions; however, Management believes the institutions are of high credit quality. The Company assesses market risk in debt and equity securities through consultation with its outside investment advisors. Management is responsible for directing investment activity based on current economic conditions. The majority of accounts receivable are due from companies which are well-established entities. In the secondthird quarter of 2020, a significant portion of the Company’s sales were to the U.S. government, which Management does not consider a credit risk. As a consequence, Management considers any exposure from concentrations of credit risks to be limited.

The following table reflects significant customers for the three- and six-monthnine-month periods ending JuneSeptember 30, 2020 and 2019, respectively:

In the secondthird quarter of 2020, approximately $1.4$12.9 million of the Company’s sales were to the Department of Health and Human Services of the United States in partial fulfillment of a recent $83.8 million delivery order to supply automated retraction safety syringes.syringes (the “HHS Order”). Management expects the U.S. government to remain a significant customer through the remainder of 2020, and sales under the HHS Order to increase quarterly through May 2021.

The Company manufactures some of its products in Little Elm, Texas as well as utilizing manufacturers in China. The Company obtained roughly 83.5%82.2% and 80.5%82.1% of its products in the first sixnine months of 2020 and 2019, respectively, from its Chinese manufacturers. Purchases from Chinese manufacturers aggregated 85.0%80.5% and 84.1%84.2% of products in the three-month periods ended JuneSeptember 30, 2020 and 2019, respectively. In the

event that the Company becomes unable to purchase products from its Chinese manufacturers, the Company would need to find an alternate manufacturer for its blood collection set, IV catheter, Patient Safe^® syringe, 0.5mL insulin syringe, 0.5mL autodisable syringe, and 2mL, 5mL, and 10mL syringes, and would increase domestic production for the 1mL and 3mL syringes and EasyPoint^® needles. Regardless of vendor availability, the Company expects to increase its domestic syringe production capacity at its facilities pursuant to the plans outlined in the TIA as hereinafter defined.

Revenue recognition

The Company recognizes revenue when it has satisfied all performance obligations to the customer, generally when title and risk of loss pass to the customer. Payments from customers with approved credit terms are typically due 30 days from the invoice date. Under certain contracts, revenue is recorded on the basis of sales price to distributors, less contractual pricing allowances. Contractual pricing allowances consist of: (i) rebates granted to distributors who provide tracking reports which show, among other things, the facility that purchased the products, and (ii) a provision for estimated contractual pricing allowances for products for which the Company has not received tracking reports. Rebates are recorded when issued and are applied against the customer’s receivable balance. Distributors receive a rebate for the difference between the Wholesale Acquisition Cost and the appropriate contract price as reflected on a tracking report provided by the distributor to the Company. If product is sold by a distributor to an entity that has no contract, there is a standard rebate (lower than a contracted rebate) given to the distributor. One of the purposes of the rebate is to encourage distributors to submit tracking reports to the Company. The provision for contractual pricing allowances is recognized in the period the related sales are recognized and is reviewed at the end of each quarter and adjusted for changes in levels of products for which there is no tracking report. Additionally, if it becomes clear that tracking reports will not be provided by individual distributors, the provision is further adjusted. The estimated contractual allowance is included in Accounts payable in the Condensed Balance Sheets and deducted from Revenues in the Condensed Statements of Operations. Accounts payable included estimated contractual allowances for $5,275,825$3,714,002 and $3,586,726 as of JuneSeptember 30, 2020 and December 31, 2019, respectively. The terms and conditions of contractual pricing allowances are governed by contracts between the Company and its distributors. Revenue for shipments directly to end-users is recognized when title and risk of ownership pass from the Company. End-users do not receive any contractual allowances on their purchases. Any product shipped or distributed for evaluation purposes is expensed.

The Company provides product warranties that: i) the products are fit for medical use as generally defined within the boundaries of United States FDA approval; ii) the products are not defective; and iii) the products will conform to the descriptions set forth in their respective labeling, provided that they are used in accordance with such labeling and the Company’s written directions for use. The Company has historically not incurred significant warranty claims.

The Company’s domestic return policy provides that a customer may return incorrect shipments within 10 days following arrival at the distributor’s facility. In all such cases, the distributor must obtain an authorization code from the Company and affix the code to the returned product. The Company’s domestic return policy also generally provides that a customer may return product that is overstocked. Overstocking returns are limited to two times in each 12-month period up to 1% of distributor’s total purchase of products for the prior 12-month period. All product overstocks and returns are subject to inspection and acceptance by the Company.

The Company’s international distribution agreements generally do not provide for any returns.

The Company requires certain customers to pay in advance of product shipment. Such prepayments from customers are recorded in Other accrued liabilities and are generally recognized as revenue within 30 to 60 days of shipment of the product.

The Company recognizes revenue from licensing agreements when collection of such amounts from third parties is reasonably assured. If the Company licenses its products for sale, the Company is obligated to pay Thomas J. Shaw, the owner of certain patented technology, a certain percentage of such revenue pursuant to the terms of the Technology License Agreement between the Company and Mr. Shaw.

Disaggregated information of revenue recognized from contracts with customers and licensing fees recognized are as follows:

Income taxes

The Company evaluates tax positions taken or expected to be taken in a tax return for recognition in the financial statements based on whether it is “more-likely-than-not” that a tax position will be sustained based

upon the technical merits of the position. Measurement of the tax position is based upon the largest amount of benefit that is greater than 50% likely of being realized upon ultimate settlement.

The Company provides for deferred income taxes through utilizing an asset and liability approach for financial accounting and reporting based on the tax effects of differences between the financial statement and tax bases of assets and liabilities, based on enacted rates expected to be in effect when such differences reverse in future periods. Deferred tax assets are periodically reviewed for realizability. In prior periods, the Company established a valuation allowance for its net deferred tax asset as future taxable income which could not be reasonably assured. During the quarter ended June 30, 2020, the Company released its valuation allowance based on available evidence supporting that its deferred tax assets will be realized in full.

Earnings per share

The Company computes basic earnings or loss per share (“EPS”) by dividing net earnings for the period (adjusted for any cumulative dividends for the period) by the weighted average number of common shares outstanding during the period. Diluted EPS includes the determinants of basic EPS and, in addition, reflects the dilutive effect, if any, of the common stock deliverable pursuant to stock options or common stock issuable upon the conversion of convertible preferred stock. The calculation of diluted EPS included 347,950226,150 shares of Common Stock underlying issued and outstanding stock options for both the three and sixnine months ended JuneSeptember 30, 2020, respectively. All common stock2020. Common Stock issuable upon the conversion of convertible preferred stock is excluded from the calculation of diluted EPS for the three months ended September 30, 2019 and for the nine months ended September 30, 2020 and 2019 as their effect was antidilutive for all periods presented.those periods. Common Stock issuable upon the conversion of convertible preferred stock is included in the calculation of diluted EPS for the three months ended September 30, 2020 as their effect was dilutive for the period. The potential dilution, if any, is shown on the following schedule:

The FASB Codification 260-10-S99-2, Effect on the Calculation of Earnings per Share for the Redemption or Induced Conversion of Preferred Stock, requires the gain or loss on extinguishment of equity-classified preferred stock to be included in the net income per common stockholder used to calculate earnings per share (similar to the treatment of dividends paid on preferred stock). The difference between (1) the fair value of the consideration transferred to the holders of the preferred stock and (2) the carrying amount of the preferred stock (net of issuance costs) is subtracted from (or added to) net income to arrive at income available to common stockholders in the calculation of earnings per share.

The Company has determined to apply this guidance to its accounting treatment of the preferred stock transactions described in Note 12.

Shipping and handling costs

The Company classifies shipping and handling costs as part of Cost of sales in the Condensed Statements of Operations.

Research and development costs

Research and development costs are expensed as incurred.

Leases

The Company determines if an arrangement is a lease at inception. Operating and finance leases are included in Other assets, Other accrued liabilities, and Other long-term liabilities on the Condensed Balance Sheets. Right-of-use (“ROU”) assets represent the Company’s right to use an underlying asset for the lease term and lease liabilities represent the obligation to make lease payments arising from the lease. Operating lease ROU assets and liabilities are recognized at the commencement date based on the present value of lease payments over the lease term. As the Company’s leases do not provide an implicit rate, the incremental borrowing rate based on information available at the commencement date was used in determining the present value of lease payments.

The operating lease ROU asset also includes any lease payments made and excludes lease incentives. Lease terms may include options to extend or terminate the lease when it is reasonably certain that the Company will exercise that option. Lease expense for lease payments is recognized on a straight-line basis over the lease term. Leases with an initial term of twelve months or less are not recorded on the Condensed Balance Sheets; however, rent expense is recognized on a straight-line basis over the lease term.

Technology Investment Agreement (TIA)

Effective July 1, 2020, the Company entered into a Technology Investment Agreement (“TIA”) with the United States Government Department of Defense, U.S. Army Contracting Command-Aberdeen Proving Ground, Natick Contracting Division & Edgewood Contracting Division (ACC-APG, NCD & ECD) on behalf of the Biomedical Advanced Research and Development Authority (BARDA) (“Government”) for $53,664,286 in Government funding for expanding the Company’s domestic production of needles and syringes. Pursuant to the terms of the TIA, the Company is expected to make significant additions to its facilities which should allow the Company to increase domestic production. As reimbursements are received from the Government for such expenditures, the Company records a deferred liability. The deferred liability will be systematically amortized as a gain over the life of the related property, plant, and equipment as to offset the related depreciation expense of the assets acquired. The amortization will be presented separately from the depreciation expense on the Condensed Statements of Operations.

Recently Adopted Pronouncements

The Company adopted ASU 2016-13, “Financial Instruments — Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments,” as well as subsequent clarifying amendments on January 1, 2020.  Among other things, these amendments require the measurement of all expected credit losses for financial assets held at the reporting date based on historical experience, current conditions, and reasonable and supportable forecasts.  Many of the loss estimation techniques applied previously will still be permitted, although the inputs to those techniques will change to reflect the full amount of expected credit losses.  The adoption of ASU 2016-13, as well as the Targeted Transition Relief as provided by ASU 2019-05, “Financial Instruments – Credit Losses (Topic 326) – Targeted Transition Relief” did not have a significant impact on the Company’s financial statements.

The Company adopted ASU 2018-15, “Intangibles—Goodwill and Other—Internal-Use Software (Subtopic 350-40):  Customer’s Accounting for Implementation Costs Incurred in a Cloud Computing Arrangement That is a Service Contract (a Consensus of the FASB Emerging Issues Task Force)” on January 1, 2020.  This amendment requires that implemented costs incurred in a hosting arrangement that is a service contract should be accounted for in accordance with ASC 350-40 Internal-Use Software.  Accordingly, costs incurred during the preliminary project and post-implementation stages are expensed and costs associated with the application development phase are capitalized.  The amendment also requires that capitalized costs be amortized over the term of the hosting arrangement and that capitalized costs should be evaluated for impairment.  The adoption of this ASU did not have a significant impact on the Company’s financial statements or disclosures.

In August 2018, the FASB issued ASU 2018-13 “Fair Value Measurement (Topic 820): Disclosure Framework – Changes to the Disclosure Requirements for Fair Value Measurement.” The amendment modifies, among other things, disclosure requirements on fair value measurements and eliminates certain disclosures related to transfers and valuation levels of Level 3 fair value measurements. Additionally, the amendment requires disclosure of changes in unrealized gains and losses in other comprehensive income for Level 3 fair value measurements and certain qualitative factors related to significant unobservable inputs used in Level 3 valuations. The amendment is effective for annual periods beginning after December 15, 2019 and interim periods within the annual period. The adoption of ASU 2018-13 did not have a significant effect on the Company’s financial statements, as the Company does not currently have any investments classified as Level 3 fair value measurements.

Recently Issued Pronouncements

In December 2019, the FASB issued ASU 2019-12, “Income Taxes: Simplifying the Accounting for Income Taxes”. The new standard is intended to simplify the accounting for income taxes by eliminating certain exceptions related to the approach for intraperiod tax allocation, the methodology for calculating income taxes in an interim period and the recognition of deferred tax liabilities for outside basis differences. The new guidance also simplifies aspects of the accounting for franchise taxes and enacted changes in tax laws or rates and clarifies the accounting for transactions that result in a step-up in the tax basis of goodwill. The standard is effective for annual periods beginning after December 15, 2020 and interim periods within the annual period, with early adoption permitted. Adoption of the standard requires certain changes to primarily be made prospectively, with some changes to be made retrospectively. The Company is currently evaluatinghas determined that the impact adoption of ASU 2019-12 will not have a material impact on its financial statements.

In March 2020, the FASB issued ASU No. 2020-04, Reference Rate Reform (Topic 848): Facilitation of the Effects of Reference Rate Reform on Financial Reporting, to ease the potential burden in accounting for reference rate reform. The new guidance provides optional expedients for contracts that reference LIBOR, if certain criteria are met, that can be applied through December 31, 2022. As reference rate reform is still an ongoing process, the Company will continue to evaluate the timing and potential impact of adoption for optional expedients when deemed necessary.

Inventories consist of the following:

ASC 820, Fair Value Measurements, defines fair value, establishes a framework for measuring fair value and requires additional disclosures regarding certain fair value measurements. ASC 820 establishes a three-tier hierarchy for measuring fair value, as follows:

The following tables summarize the values of assets designated as Investments in debt and equity securities:

The Company holds high-grade ETFs, mutual funds, individual equity stocks (predominately in the energy sector), and debt securities as investments. These assets are readily marketable and are carried at fair value as of the date of the Condensed Balance Sheets. The Company intends to hold these assets for possible future operating requirements.

The following table summarizes gross unrealized gains and losses from Investments in debt and equity securities:

Unrealized gains (losses) on investments in debt and equity securities were $870,760$559,543 and $102,128$129,728 for the sixnine months ended JuneSeptember 30, 2020 and 2019, respectively.

The Company’s effective tax rate on the net income before income taxes was (85.1)%15.63% and (74.8)(1.2)% for the three and sixnine months ended JuneSeptember 30, 2020, respectively, and approximately 1.0%0.4% and 0.6% for each of the three- and six-monthnine-month periods ended JuneSeptember 30, 2019. For the three and nine months ended September 30, 2020 and 2019, the Company's effective tax rate was determined based on the estimated annual effective income tax rate.

The effective tax rate for the sixthree and nine months ended JuneSeptember 30, 2020 iswas different from the three months ended June 30, 2020federal statutory rate due primarily to the $1.8 millionincome tax benefit recorded as a discrete item in connection with the release of the valuation allowance on deferred tax assets expected to be realized in future periods.assets.

Other accrued liabilities consist of the following:

Other long-term liabilities consist of the following:

On November 7, 2019, the Company filed a lawsuit in the 44^th District Court of Dallas County, Texas (No. DC-19-17946) against Locke Lord, LLP and Roy Hardin in connection with their legal representation of the Company in its previous litigation against Becton, Dickinson and Company (“BD”). The Company alleges that the defendants breached their fiduciary duties, committed malpractice, and were negligent in their representation of the Company. The Company seeks actual and exemplary damages, disgorgement, costs, and interest. The defendants have filed aOn October 6, 2020, the Court dismissed Defendants’ motion to dismiss, andwhich order was appealed by the Defendants on October 9, 2020 to the Court has scheduled a hearing on such motion on September 10, 2020.of Appeals, Fifth District of Texas at Dallas.

The Company does not operate in separate reportable segments. Shipments to international customers generally require a prepayment either by wire transfer or an irrevocable confirmed letter of credit. The Company does extend credit to international customers on some occasions depending upon certain criteria, including, but not limited to, the credit worthiness of the customer, the stability of the country, banking restrictions, and the size of the order. All transactions are in U.S. currency.

Revenues by geography are as follows:

Long-lived assets by geography are as follows:

The Board declared and the Company paid dividends to Series I and Series II Class B Preferred Shareholders in the following amounts: $12,313 and $42,800, respectively, on January 18, 2019 and April 22, 2019. The Board declared and the Company paid dividends to Series I and Series II Class B Preferred Shareholders in the following amounts: $12,000 and $42,800, respectively, on July 19, 2019, October 21, 2019, January 22, 2020, April 20, 2020, and July 20, 2020. The Board declared and the Company paid dividends on October 22, 2020 to Series I and Series II Class B Preferred Shareholders in the following amounts: $12,000 and $40,242.

In the third quarter of 2020, a shareholder converted 15,000 shares of Series II Class B Preferred Stock into the same number of shares of Common Stock.

The Company has operating leases for a corporate office and equipment.warehouse space.  The leases have a remaining lease term of less than one year.  The Company currently has no finance leases.  The right-of-use (“ROU”) asset is determined based on the lease liability adjusted for lease incentives received.  Lease expense is recognized on a straight-line basis over the lease term.  The leases may include various expenses incidental to the use of the property, such as common area maintenance, property taxes and insurance.  These costs are separate from the minimum rent payment and are not considered in the determination of the lease liability and ROU asset.  The Company has not noted any material instances in its leases where these costs were combined with the minimum rent payment and has therefore elected the policy to not separate lease from non-lease components if they are combined with the minimum rent payment.  The option periods are not included in the determination of the lease liability and right-of-use asset as the Company is not reasonably certain if it will extend at the time of lease commencement.

The operating lease cost component of the lease expense was $40,768$69,689 for the six-monthnine-month period ended JuneSeptember 30, 2020.  The cash paid for amounts included in the measurement of lease liabilities as a component of cash flows related to leases was $40,768$69,689 for the sixnine months ended JuneSeptember 30, 2020.  The operating lease cost component of the lease expense was $39,912$60,175 for the sixnine months ended JuneSeptember 30, 2019. The cash paid for amounts included in the measurement of lease liabilities as a component of cash flows related to leases was $39,912$60,175 for the sixnine months ended JuneSeptember 30, 2019.

Assets and liabilities associated with these leases included in the Condensed Balance Sheets are as follows:

The weighted average remaining lease term is six9.4 months and the weighted average discount rate is 4.0%3.82%.

Future minimum payments under non-cancelable operating leases and financing leases consist of the following at JuneSeptember 30, 2020:

Effective January 13, 2020, the Company agreed with two preferred stockholders to purchasepurchased outstanding Class B Convertible Preferred Stock (the “Preferred Stock”) from preferred shareholders for cash and Common Stock. Such preferred stockholders tendered to the Company a total of 2,500 shares of Series III Preferred Stock and 5,000 shares of Series IV Preferred Stock. A total of $75,000 and 7,500 shares of Common Stock were issued as consideration therefor. In accordance with the terms of the agreements, the preferred stockholders agreed to waive all unpaid dividends in arrears associated with their Preferred Stock, which resulted in a waiver of a total of $149,795 in unpaid dividends in arrears.

Effective May 18, 2020, the Company agreed to purchasepurchased 2,500 shares of Series IV Preferred Stock from one shareholder for $25,000 and 2,500 shares of Common Stock. Such preferred stockholder agreed to waive all unpaid dividends in arrears associated with its Preferred Stock, which resulted in a waiver of a total of $50,370 in unpaid dividends in arrears.

On September 30, 2020, the Company purchased 300,000 shares of Series IV Preferred Stock from a shareholder for $3,000,000 in cash, with a net present value of $2,723,248, to be paid over a three-year period beginning February 2021 and 600,000 shares of Common Stock. Such preferred stockholder agreed to waive all unpaid dividends in arrears associated with its Preferred Stock, which resulted in a waiver of a total of $6,091,233 in unpaid dividends in arrears.

Stock options were exercised by the Company’s employees and directors at various dates during the quarter ended JuneSeptember 30, 2020, and, consequently, a total of 284,850121,800 shares of Common Stock were issued for an aggregate payment to the Company of $626,687$224,325 to exercise such options. For the nine months ended September 30, 2020, as a result of exercised stock options, a total of 406,650 shares of Common Stock were issued for an aggregate payment to the Company of $851,012.

To date, the Company’s manufacturing facility in Little Elm, Texas has continued to operate due to its status as an essential business. As a result of the COVID-19 pandemic, the Company has implemented certain safety precautions at its facility to reduce the risk of the potential spread of the novel coronavirus. The Company has implemented arrangements to reduce the number of office staff employees working on-site at the production facility, as well as instituting personal distancing policies and monitoring of essential production staff to minimize the risk of infection. The Company continues to monitor the evolving situation and will work to further mitigate risks to staff and to customers. The Company is continuing to evaluate the ever-changing circumstances surrounding this pandemic as it relates to its ability to continue to source materials and products, maintain a workforce, and operate its business effectively and efficiently. Despite the global disruption of the coronavirus pandemic, the Company has not experienced a significant disruption to its supply chain. During 2020, the Company has experienced an increase in demand for its products and has been able to meet such demand with increased volumes despite the pandemic. The Company is unable to predict with certainty its ability to maintain its current operational functionality.