Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-Q

    Quarterly Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 for the period

      ended March 31,September 30, 2020

OR

       Transition Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

Commission File Number 0-21719

Steel Dynamics, Inc.

(Exact name of registrant as specified in its charter)

Indiana

    

35-1929476

(State or other jurisdiction of incorporation or organization)

(I.R.S. Employer Identification No.)

7575 West Jefferson Blvd, Fort Wayne, IN

46804

(Address of principal executive offices)

(Zip Code)

Registrant’s telephone number, including area code: (260) 969-3500

Securities registered pursuant to Section 12(b) of the Act.

Title of each class

Trading Symbol

Name of each exchange on which registered

Common Stock voting, $0.0025 par value

STLD

NASDAQ Global Select Market

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes    No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).   Yes    No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company (see definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act).

(Check one):

    

Large accelerated filer

    

Accelerated filer

    

Non-accelerated filer

Smaller reporting company  

Emerging growth company

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes  No

As of May 1,October 29, 2020, Registrant had 210,332,119210,366,497 outstanding shares of common stock.

Table of Contents

STEEL DYNAMICS, INC.

Table of Contents

PART I. Financial Information

Item 1.

Financial Statements:

Page

Consolidated Balance Sheets as of March 31,September 30, 2020 (unaudited) and December 31, 2019

1

Consolidated Statements of Income for the three-monththree and nine-month periods ended March 31,September 30, 2020 and 2019 (unaudited)

2

Consolidated Statements of Comprehensive Income for the three-monththree and nine-month periods ended March 31,September 30, 2020 and 2019 (unaudited)

3

Consolidated Statements of Cash Flows for the three-monththree and nine-month periods ended March 31,September 30, 2020 and 2019 (unaudited)

4

Notes to Consolidated Financial Statements (unaudited)

5

Item 2.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

1216

Item 3.

Quantitative and Qualitative Disclosures about Market Risk

1924

Item 4.

Controls and Procedures

2025

PART II. Other Information

Item 1.

Legal Proceedings

2126

Item 1A.

Risk Factors

2126

Item 2.

Unregistered Sales of Equity Securities and Use of Proceeds

2227

Item 3.

Defaults Upon Senior Securities

2227

Item 4.

Mine Safety Disclosures

2227

Item 5.

Other Information

2227

Item 6.

Exhibits

2328

Exhibit Index

2328

Signature

2429

Table of Contents

STEEL DYNAMICS, INC.

CONSOLIDATED BALANCE SHEETS

(in thousands, except share data)

March 31,

December 31,

2020

2019

Assets

(unaudited)

Current assets

Cash and equivalents

$

1,235,478

$

1,381,460

Short-term investments

219,193

262,174

Accounts receivable, net

995,324

841,378

Accounts receivable-related parties

3,084

2,958

Inventories

1,644,538

1,689,043

Other current assets

45,351

76,012

Total current assets

4,142,968

4,253,025

Property, plant and equipment, net

3,327,605

3,135,886

Intangible assets, net

320,711

327,901

Goodwill

452,068

452,915

Other assets

101,571

106,038

Total assets

$

8,344,923

$

8,275,765

Liabilities and Equity

Current liabilities

Accounts payable

$

602,875

$

509,687

Accounts payable-related parties

9,285

3,657

Income taxes payable

17,806

2,014

Accrued payroll and benefits

124,181

208,287

Accrued interest

39,749

18,292

Accrued expenses

167,718

175,405

Current maturities of long-term debt

70,106

89,356

Total current liabilities

1,031,720

1,006,698

Long-term debt

2,646,012

2,644,988

Deferred income taxes

489,248

484,169

Other liabilities

72,004

75,055

Total liabilities

4,238,984

4,210,910

Commitments and contingencies

Redeemable noncontrolling interests

151,014

143,614

Equity

Common stock voting, $.0025 par value; 900,000,000 shares authorized;

266,079,627 and 266,072,787 shares issued; and 210,338,959 and 214,502,639

shares outstanding, as of March 31, 2020 and December 31, 2019, respectively

646

646

Treasury stock, at cost; 55,740,668 and 51,570,148 shares,

as of March 31, 2020 and December 31, 2019, respectively

(1,624,808)

(1,525,113)

Additional paid-in capital

1,183,776

1,181,012

Retained earnings

4,553,882

4,419,296

Accumulated other comprehensive income (loss)

30

(7)

Total Steel Dynamics, Inc. equity

4,113,526

4,075,834

Noncontrolling interests

(158,601)

(154,593)

Total equity

3,954,925

3,921,241

Total liabilities and equity

$

8,344,923

$

8,275,765

September 30,

December 31,

2020

2019

Assets

(unaudited)

Current assets

Cash and equivalents

$

1,267,618

$

1,381,460

Short-term investments

-

262,174

Accounts receivable, net

915,223

841,378

Accounts receivable-related parties

3,619

2,958

Inventories

1,609,216

1,689,043

Other current assets

59,219

76,012

Total current assets

3,854,895

4,253,025

Property, plant and equipment, net

3,862,375

3,135,886

Intangible assets, net

306,574

327,901

Goodwill

474,520

452,915

Other assets

119,192

106,038

Total assets

$

8,617,556

$

8,275,765

Liabilities and Equity

Current liabilities

Accounts payable

$

702,991

$

509,687

Accounts payable-related parties

12,690

3,657

Income taxes payable

827

2,014

Accrued payroll and benefits

177,935

208,287

Accrued interest

27,649

18,292

Accrued expenses

171,307

175,405

Current maturities of long-term debt

82,229

89,356

Total current liabilities

1,175,628

1,006,698

Long-term debt

2,636,615

2,644,988

Deferred income taxes

512,503

484,169

Other liabilities

94,011

75,055

Total liabilities

4,418,757

4,210,910

Commitments and contingencies

Redeemable noncontrolling interests

155,414

143,614

Equity

Common stock voting, $.0025 par value; 900,000,000 shares authorized;

266,072,787 and 266,072,787 shares issued; and 210,366,497 and 214,502,639

shares outstanding, as of September 30, 2020 and December 31, 2019, respectively

646

646

Treasury stock, at cost; 55,706,290 and 51,570,148 shares,

as of September 30, 2020 and December 31, 2019, respectively

(1,623,805)

(1,525,113)

Additional paid-in capital

1,200,228

1,181,012

Retained earnings

4,624,019

4,419,296

Accumulated other comprehensive income (loss)

95

(7)

Total Steel Dynamics, Inc. equity

4,201,183

4,075,834

Noncontrolling interests

(157,798)

(154,593)

Total equity

4,043,385

3,921,241

Total liabilities and equity

$

8,617,556

$

8,275,765

See notes to consolidated financial statements.

1

Table of Contents

STEEL DYNAMICS, INC.

CONSOLIDATED STATEMENTS OF INCOME (UNAUDITED)

(in thousands, except per share data)

Three Months Ended

March 31,

2020

2019

Net sales

Unrelated parties

$

2,571,544

$

2,814,486

Related parties

3,556

2,949

Total net sales

2,575,100

2,817,435

Costs of goods sold

2,159,871

2,383,865

Gross profit

415,229

433,570

Selling, general and administrative expenses

112,898

111,038

Profit sharing

21,454

23,677

Amortization of intangible assets

7,191

7,013

Operating income

273,686

291,842

Interest expense, net of capitalized interest

28,019

31,122

Other income, net

(2,589)

(6,343)

Income before income taxes

248,256

267,063

Income tax expense

57,420

62,236

Net income

190,836

204,827

Net income attributable to noncontrolling interests

(3,496)

(499)

Net income attributable to Steel Dynamics, Inc.

$

187,340

$

204,328

Basic earnings per share attributable to Steel Dynamics,

Inc. stockholders

$

0.88

$

0.91

Weighted average common shares outstanding

213,254

224,058

Diluted earnings per share attributable to Steel Dynamics, Inc.

stockholders, including the effect of assumed conversions

when dilutive

$

0.88

$

0.91

Weighted average common shares and share equivalents outstanding

214,024

224,962

Dividends declared per share

$

0.2500

$

0.2400

Three Months Ended

Nine Months Ended

September 30,

September 30,

2020

2019

2020

2019

Net sales

Unrelated parties

$

2,327,224

$

2,523,279

$

6,991,732

$

8,104,129

Related parties

3,608

3,566

8,505

10,666

Total net sales

2,330,832

2,526,845

7,000,237

8,114,795

Costs of goods sold

2,038,017

2,167,006

6,007,762

6,900,220

Gross profit

292,815

359,839

992,475

1,214,575

Selling, general and administrative expenses

118,235

107,242

340,432

324,530

Profit sharing

11,778

17,848

42,324

64,396

Amortization of intangible assets

6,946

6,704

21,327

20,730

Operating income

155,856

228,045

588,392

804,919

Interest expense, net of capitalized interest

18,950

31,339

74,671

94,782

Other (income) expense, net

3,546

(4,545)

29,060

(15,137)

Income before income taxes

133,360

201,251

484,661

725,274

Income tax expense

29,083

48,643

110,783

171,093

Net income

104,277

152,608

373,878

554,181

Net income attributable to noncontrolling interests

(4,134)

(1,560)

(10,899)

(4,503)

Net income attributable to Steel Dynamics, Inc.

$

100,143

$

151,048

$

362,979

$

549,678

Basic earnings per share attributable to Steel Dynamics,

Inc. stockholders

$

0.48

$

0.69

$

1.72

$

2.49

Weighted average common shares outstanding

210,366

217,873

211,321

221,145

Diluted earnings per share attributable to Steel Dynamics, Inc.

stockholders, including the effect of assumed conversions

when dilutive

$

0.47

$

0.69

$

1.71

$

2.47

Weighted average common shares and share equivalents outstanding

211,926

219,109

212,443

222,197

Dividends declared per share

$

0.25

$

0.24

$

0.75

$

0.72

See notes to consolidated financial statements.

2

Table of Contents

STEEL DYNAMICS, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (UNAUDITED)

(in thousands)

Three Months Ended

March 31,

2020

2019

Net income

$

190,836

$

204,827

Other comprehensive income (loss) - net unrealized gain (loss) on

cash flow hedging derivatives, net of income tax

37

(171)

Comprehensive income

190,873

204,656

Comprehensive income attributable to noncontrolling interests

(3,496)

(499)

Comprehensive income attributable to Steel Dynamics, Inc.

$

187,377

$

204,157

Three Months Ended

Nine Months Ended

September 30,

September 30,

2020

2019

2020

2019

Net income

$

104,277

$

152,608

$

373,878

$

554,181

Other comprehensive income (loss) - net unrealized gain (loss) on

cash flow hedging derivatives, net of income tax

(121)

(39)

102

(262)

Comprehensive income

104,156

152,569

373,980

553,919

Comprehensive income attributable to noncontrolling interests

(4,134)

(1,560)

(10,899)

(4,503)

Comprehensive income attributable to Steel Dynamics, Inc.

$

100,022

$

151,009

$

363,081

$

549,416

See notes to consolidated financial statements.

3

Table of Contents

STEEL DYNAMICS, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS (UNAUDITED)

(in thousands)

Three Months Ended

March 31,

2020

2019

Operating activities:

Net income

$

190,836

$

204,827

Adjustments to reconcile net income to net cash provided by

operating activities:

Depreciation and amortization

80,259

80,174

Equity-based compensation

17,844

15,308

Deferred income taxes

5,927

12,091

Other adjustments

(264)

728

Changes in certain assets and liabilities:

Accounts receivable

(154,072)

(61,062)

Inventories

44,505

39,469

Other assets

(1,541)

301

Accounts payable

51,596

3,206

Income taxes receivable/payable

52,385

49,850

Accrued expenses

(76,194)

(163,339)

Net cash provided by operating activities

211,281

181,553

Investing activities:

Purchases of property, plant and equipment

(217,535)

(54,436)

Purchases of short-term investments

(149,359)

(49,677)

Proceeds from maturities of short-term investments

192,340

104,737

Acquisition of business, net of cash and restricted cash acquired

-

(93,412)

Other investing activities

518

364

Net cash used in investing activities

(174,036)

(92,424)

Financing activities:

Issuance of current and long-term debt

216,261

121,234

Repayment of current and long-term debt

(235,757)

(115,271)

Dividends paid

(51,481)

(42,239)

Purchases of treasury stock

(106,529)

(84,308)

Other financing activities

(6,152)

(5,720)

Net cash used in financing activities

(183,658)

(126,304)

Decrease in cash, cash equivalents, and restricted cash

(146,413)

(37,175)

Cash, cash equivalents, and restricted cash at beginning of period

1,387,397

834,423

Cash, cash equivalents, and restricted cash at end of period

$

1,240,984

$

797,248

Supplemental disclosure information:

Cash paid for interest

$

8,785

$

8,606

Cash paid for income taxes, net

$

518

$

1,839

Three Months Ended

Nine Months Ended

September 30,

September 30,

2020

2019

2020

2019

Operating activities:

Net income

$

104,277

$

152,608

$

373,878

$

554,181

Adjustments to reconcile net income to net cash provided by

operating activities:

Depreciation and amortization

81,752

79,470

240,732

240,555

Equity-based compensation

9,486

8,841

36,850

33,229

Deferred income taxes

10,388

11,311

30,949

34,952

Other adjustments

17,237

(1,116)

21,701

(952)

Changes in certain assets and liabilities:

Accounts receivable

(58,271)

85,633

(57,991)

95,195

Inventories

(38,236)

35,479

83,790

139,889

Other assets

(3,894)

39

5,702

7,632

Accounts payable

645

1,111

121,764

(54,167)

Income taxes receivable/payable

(27,127)

6,293

33,251

19,715

Accrued expenses

55,533

64,533

(41,545)

(83,001)

Net cash provided by operating activities

151,790

444,202

849,081

987,228

Investing activities:

Purchases of property, plant and equipment

(327,647)

(154,131)

(854,898)

(293,687)

Purchases of short-term investments

-

(34,884)

(149,359)

(134,026)

Proceeds from maturities of short-term investments

69,545

79,508

411,533

293,279

Acquisition of business, net of cash and restricted cash acquired

(59,012)

(3,694)

(59,012)

(97,106)

Other investing activities

380

2,746

1,701

4,023

Net cash used in investing activities

(316,734)

(110,455)

(650,035)

(227,517)

���

Financing activities:

Issuance of current and long-term debt

295,814

128,230

1,611,849

374,686

Repayment of current and long-term debt

(305,911)

(119,988)

(1,645,482)

(369,134)

Dividends paid

(52,592)

(52,751)

(156,657)

(148,493)

Purchases of treasury stock

-

(114,950)

(106,529)

(292,394)

Other financing activities

(1,587)

(1,527)

(16,502)

(7,259)

Net cash used in financing activities

(64,276)

(160,986)

(313,321)

(442,594)

Increase (decrease) in cash, cash equivalents, and restricted cash

(229,220)

172,761

(114,275)

317,117

Cash, cash equivalents, and restricted cash at beginning of period

1,502,342

978,779

1,387,397

834,423

Cash, cash equivalents, and restricted cash at end of period

$

1,273,122

$

1,151,540

$

1,273,122

$

1,151,540

Supplemental disclosure information:

Cash paid for interest

$

8,597

$

9,115

$

77,050

$

71,702

Cash paid for income taxes, net

$

43,900

$

29,794

$

45,848

$

116,149

See notes to consolidated financial statements.

4

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 1. Description of the Business and Significant Accounting Policies

Description of the Business

Steel Dynamics, Inc. (SDI), together with its subsidiaries (the company), is a domestic manufacturer of steel products and metals recycler. The company has 3 reportable segments: steel operations, metals recycling operations, and steel fabrication operations.

Steel Operations Segment. Steel operations include the company’s Butler Flat Roll Division, Columbus Flat Roll Division, The Techs galvanizing lines, Heartland Flat Roll Division, United Steel Supply, Structural and Rail Division, Engineered Bar Products Division, Vulcan Threaded Products, Inc., Roanoke Bar Division, Steel of West Virginia, and Iron Dynamics, a liquid pig iron (scrap substitute) production facility that supplies solely the Butler Flat Roll Division. These operations include electric arc furnace steel mills, producing steel from ferrous scrap and scrap substitutes, utilizing continuous casting, automated rolling mills, with several coating and processing lines. Steel operations accounted for 75%73% and 76% of the company’s consolidated external net sales during the three monthsthree-month periods ended March 31,September 30, 2020 and 2019.2019, and 75% and 76% during the nine-month periods ended September 30, 2020 and 2019, respectively.

Metals Recycling Operations Segment. Metals recycling operations consists solely of OmniSource, LLC (OmniSource), and includes both ferrous and nonferrous processing, transportation, marketing, brokerage, and scrap management services.services, including Omni Mexico (formerly Zimmer, S.A de C.V), acquired August 3, 2020 (refer to Note 2. Acquisition). Metals recycling operations accounted for 11%12% and 13%11% of the company’s consolidated external net sales during the three monthsthree-month periods ended March 31,September 30, 2020 and 2019, respectively, and 10% and 12% during the nine-month periods ended September 30, 2020 and 2019, respectively.

Steel Fabrication Operations Segment. Steel fabrication operations include the company’s New Millennium Building Systems’ joist and deck plants located throughout the United States, and in Northern Mexico. Revenues from these plants are generated from the fabrication of trusses, girders, steel joists and steel deck used within the non-residential construction industry. Steel fabrication operations accounted for 9% and 8%10% of the company’s consolidated external net sales during the three monthsthree-month periods ended March 31,September 30, 2020 and 2019, and 10% and 9% of the company’s consolidated external net sales during the nine-month periods ended September 30, 2020 and 2019, respectively.

Other. Other operations consists of subsidiary operations that are below the quantitative thresholds required for reportable segments and primarily consist of smaller joint ventures, and the idle Minnesota ironmaking operations. Also included in “Other” are certain unallocated corporate accounts, such as the company’s senior unsecured credit facility, senior notes, certain other investments and certain profit sharing expenses.

Significant Accounting Policies

Principles of Consolidation. The consolidated financial statements include the accounts of SDI, together with its wholly- and majority-owned or controlled subsidiaries, after elimination of intercompany accounts and transactions. Noncontrolling and redeemable noncontrolling interests represent the noncontrolling owner’s proportionate share in the equity, income, or losses of the company’s majority-owned or controlled consolidated subsidiaries.

Use of Estimates. These consolidated financial statements are prepared in conformity with accounting principles generally accepted in the United States, and accordingly, include amounts that require management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and in the notes thereto. Significant items subject to such estimates and assumptions include the carrying value of property, plant and equipment, intangible assets, and goodwill; allowances for credit losses for trade receivables, inventories and deferred income tax assets; unrecognized tax benefits; potential environmental liabilities; and litigation claims and settlements. Actual results may differ from these estimates and assumptions.

In the opinion of management, these financial statements reflect all normal recurring adjustments necessary for a fair presentation of the interim period results. These consolidated financial statements and notes should be read in conjunction with the audited financial statements and notes thereto included in the company’s Annual Report on Form 10-K for the year ended December 31, 2019.

5

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 1. Description of the Business and Significant Accounting Policies (Continued)

Cash and Equivalents, and Restricted Cash

Cash and equivalents include all highly liquid investments with a maturity of three months or less at the date of acquisition. Restricted cash and equivalents is primarily funds held in escrow as required by various insurance and government organizations. The balance of cash, cash equivalents and restricted cash in the consolidated statements of cash flows includes restricted cash of $5.5 million at September 30, 2020 and 2019, $5.9 million $5.8 million,at June 30, 2020 and December 31, 2019, and $6.2 million at March 31, 2020, December 31, 2019, March 31,June 30, 2019 and December 31, 2018, respectively, which are recorded in Other Assets (noncurrent) in the company’s consolidated balance sheets.

5

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 1. Description of the Business and Significant Accounting Policies (Continued)

Goodwill

The company’s goodwill consisted of the following at March 31,September 30, 2020, and December 31, 2019, (in thousands):

March 31,

December 31,

September 30,

December 31,

2020

2019

2020

2019

Steel Operations Segment

$

272,133

$

272,133

Steel Operations Segment

$

272,133

$

272,133

Metals Recycling Operations Segment

178,010

178,857

Metals Recycling Operations Segment

200,462

178,857

Steel Fabrication Operations Segment

1,925

1,925

Steel Fabrication Operations Segment

1,925

1,925

$

452,068

$

452,915

$

474,520

$

452,915

The company acquired Omni Mexico (formerly Zimmer S.A. de C.V.) on August 3, 2020 (refer to Note 2. Acquisition) resulting in a preliminary purchase price allocation in which $24.1 million of goodwill was recorded in the Metals Recycling Operations segment. Metals Recycling Operations Segment goodwill decreased $847,000$2.5 million from December 31, 2019 to March 31,September 30, 2020, in recognition of the 2020 tax benefit related to the normal amortization of the component of OmniSource tax-deductible goodwill in excess of book goodwill.

Credit Losses

ASU 2016-13, Financial Instruments - Credit Losses and its subsequent corresponding updates (ASC 326), requires an entity to use a forward-looking expected loss model versus the incurred loss model for most financial instruments, including accounts receivable. The company adopted ASC 326 effective January 1, 2020, using the modified retrospective transition method, with no impact on the company’s financial position, results of operations or cash flows.

The company is exposed to credit risk in the event of nonpayment of accounts receivable by customers. The company mitigates its exposure to credit risk, which it generally extends on an unsecured basis, by performing ongoing credit evaluations and taking further action if necessary, such as requiring letters of credit or other security interests to support the customer receivable. The allowance for credit losses for accounts receivable is based on the company’s reasonable estimate of known credit risks and historical experience, adjusted for current and anticipated economic and other pertinent factors affecting the company’s customers, that may differ from historical experience. Customer accounts receivable are written off when all collection efforts have been exhausted and the amounts are deemed uncollectible.

At March 31,September 30, 2020, wethe company reported $998.4$918.8 million of accounts receivable, net of allowances for credit losses of $6.9$8.3 million. Changes in the allowance were not material for the three-month periodthree and nine-month periods ended March 31,September 30, 2020.

6

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 2. Acquisition

On August 3, 2020, the company acquired Zimmer, S.A. de C.V. (“Zimmer”) for cash consideration of $59.0 million, a portion of which was used to pay off all existing borrowings of Zimmer in accordance with the purchase agreement. The transaction was funded with available cash. The acquisition of Zimmer is part of the company’s raw material procurement strategy to support its new Texas flat roll steel mill, which is planned to begin operations mid-year 2021. Zimmer is headquartered in Monterrey, Mexico and operates 6 ferrous and nonferrous scrap facilities strategically positioned near high-volume industrial scrap sources located throughout Central and Northern Mexico, and several third party scrap processing locations. The aggregate purchase price was preliminarily allocated to the opening balance sheet of Zimmer as of August 3, 2020, based on the information available as of the acquisition date to estimate the fair value of assets acquired and liabilities assumed: current assets of $30.0 million; property, plant, and equipment of $18.3 million; goodwill of $24.1 million; and liabilities assumed of $13.4 million. The accounting for the acquisition has not yet been completed because the company has not finalized the valuations of the acquired assets, identifiable intangible assets, if any, including goodwill, and assumed liabilities.

Note 2.3. Earnings Per Share

Basic earnings per share is based on the weighted average shares of common stock outstanding during the period. Diluted earnings per share assumes the weighted average dilutive effect of common share equivalents outstanding during the period applied to the company’s basic earnings per share. Common share equivalents represent potentially dilutive restricted stock units, deferred stock units, restricted stock, and performance awards, and are excluded from the computation in periods in which they have an anti-dilutive effect. There were 0 anti-dilutive common share equivalents as of or for the three-monththree and nine-month periods ended March 31,September 30, 2020 and 2019.

Three Months Ended March 31,

Three Months Ended September 30,

2020

2019

2020

2019

Weighted

Weighted

Weighted

Weighted

Average

Average

Average

Average

Net Income

Shares

Per Share

Net Income

Shares

Per Share

Net Income

Shares

Per Share

Net Income

Shares

Per Share

(Numerator)

(Denominator)

Amount

(Numerator)

(Denominator)

Amount

(Numerator)

(Denominator)

Amount

(Numerator)

(Denominator)

Amount

Basic earnings per share

$

187,340

213,254

$

0.88

$

204,328

224,058

$

0.91

$

100,143

210,366

$

0.48

$

151,048

217,873

$

0.69

Dilutive common share equivalents

-

770

-

904

-

1,560

-

1,236

Diluted earnings per share

$

187,340

214,024

$

0.88

$

204,328

224,962

$

0.91

$

100,143

211,926

$

0.47

$

151,048

219,109

$

0.69

Nine Months Ended September 30,

2020

2019

Weighted

Weighted

Average

Average

Net Income

Shares

Per Share

Net Income

Shares

Per Share

(Numerator)

(Denominator)

Amount

(Numerator)

(Denominator)

Amount

Basic earnings per share

$

362,979

211,321

$

1.72

$

549,678

221,145

$

2.49

Dilutive common share equivalents

-

1,122

-

1,052

Diluted earnings per share

$

362,979

212,443

$

1.71

$

549,678

222,197

$

2.47

67

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 3.4. Inventories

Inventories are stated at lower of cost or net realizable value. Cost is determined using a weighted average cost method for raw materials and supplies, and on a first-in, first-out basis for other inventory. Inventory consisted of the following (in thousands):

March 31,

December 31,

2020

2019

Raw materials

$

650,140

$

686,831

Supplies

490,401

498,298

Work in progress

160,831

154,669

Finished goods

343,166

349,245

Total inventories

$

1,644,538

$

1,689,043

September 30,

December 31,

2020

2019

Raw materials

$

628,911

$

686,831

Supplies

497,274

498,298

Work in progress

149,929

154,669

Finished goods

333,102

349,245

Total inventories

$

1,609,216

$

1,689,043

Note 5. Debt

In October 2020, the company issued $350.0 million of 1.650% notes due 2027 and $400.0 million of 3.250% notes due 2050. The net proceeds from these notes will be used to fund the November 2020 call and redemption of the $350.0 million outstanding principal amount of the company’s 4.125% senior notes due 2025 at a redemption price of 102.063%, plus accrued and unpaid interest to, but not including, the date of redemption, and for general corporate purposes. The company will record expenses related to premiums and write off of unamortized debt issuance costs of approximately $10.3 million in other expenses in the fourth quarter of 2020.

In June 2020, the company issued $400.0 million of 2.400% notes due 2025 and $500.0 million of 3.250% notes due 2031. The net proceeds from these notes were used to fund the June 2020 call and redemption of the $400.0 million outstanding principal amount of the company’s 5.250% senior notes due 2023 at a redemption price of 100.875%, and the $500.0 million outstanding principal amount of the company’s 5.500% senior notes due 2024 at a redemption price of 102.750%, plus accrued and unpaid interest to, but not including, the date of redemption. The company recorded expenses related to premiums, write off of unamortized debt issuance costs, and other expenses of approximately $22.8 million, which are reflected in other expenses in the consolidated statements of income for the nine-month period ended September 30, 2020.

8

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 4.6. Changes in Equity

The following tables provide a reconciliation of the beginning and ending carrying amounts of total equity, equity attributable to stockholders of Steel Dynamics, Inc., and equity and redeemable amounts attributable to noncontrolling interests (in thousands) for each quarterly periodthe three and nine-month periods ended March 31,September 30, 2020 and 2019:

Stockholders of Steel Dynamics, Inc.

Stockholders of Steel Dynamics, Inc.

Accumulated

Accumulated

Additional

Other

Redeemable

Additional

Other

Redeemable

Common

Treasury

Paid-In

Retained

Comprehensive

Noncontrolling

Total

Noncontrolling

Common

Treasury

Paid-In

Retained

Comprehensive

Noncontrolling

Total

Noncontrolling

Stock

Stock

Capital

Earnings

Loss

Interests

Equity

Interests

Stock

Stock

Capital

Earnings

Income (Loss)

Interests

Equity

Interests

Balances at December 31, 2019

$

646

$

(1,525,113)

$

1,181,012

$

4,419,296

$

(7)

$

(154,593)

$

3,921,241

$

143,614

$

646

$

(1,525,113)

$

1,181,012

$

4,419,296

$

(7)

$

(154,593)

$

3,921,241

$

143,614

Dividends declared

-

-

-

(52,585)

-

-

(52,585)

-

-

-

-

(52,585)

-

-

(52,585)

-

Noncontrolling investors of USS

-

-

-

-

-

(7,504)

(7,504)

7,400

-

-

-

-

-

(7,504)

(7,504)

7,400

Share repurchases

-

(106,529)

-

-

-

-

(106,529)

-

-

(106,529)

-

-

-

-

(106,529)

-

Equity-based compensation

-

6,834

2,764

(169)

-

-

9,429

-

-

6,834

2,764

(169)

-

-

9,429

-

Net income

-

-

-

187,340

-

3,496

190,836

-

-

-

-

187,340

-

3,496

190,836

-

Other comprehensive income, net of tax

-

-

-

-

37

-

37

-

Balances at March 31, 2020

646

(1,624,808)

1,183,776

4,553,882

30

(158,601)

3,954,925

151,014

Dividends declared

-

-

-

(52,591)

-

-

(52,591)

-

Noncontrolling investors of USS

-

-

-

-

-

(2,410)

(2,410)

1,400

Share repurchases

-

-

-

-

-

-

-

-

Equity-based compensation

-

953

7,838

(158)

-

-

8,633

-

Net income

-

-

-

75,496

-

3,269

78,765

-

Other comprehensive income, net of tax

-

-

-

-

186

-

186

-

Balances at June 30, 2020

646

(1,623,855)

1,191,614

4,576,629

216

(157,742)

3,987,508

152,414

Dividends declared

-

-

-

(52,592)

-

-

(52,592)

-

Noncontrolling investors of USS

-

-

-

-

-

(4,190)

(4,190)

3,000

Share repurchases

-

-

-

-

-

-

-

-

Equity-based compensation

-

50

8,614

(161)

-

-

8,503

-

Net income

-

-

-

100,143

-

4,134

104,277

-

Other comprehensive loss, net of tax

-

-

-

-

37

-

37

-

-

-

-

-

(121)

-

(121)

-

Balances at March 31, 2020

$

646

$

(1,624,808)

$

1,183,776

$

4,553,882

$

30

$

(158,601)

$

3,954,925

$

151,014

Balances at September 30, 2020

$

646

$

(1,623,805)

$

1,200,228

$

4,624,019

$

95

$

(157,798)

$

4,043,385

$

155,414

Stockholders of Steel Dynamics, Inc.

Accumulated

Additional

Other

Redeemable

Common

Treasury

Paid-In

Retained

Comprehensive

Noncontrolling

Total

Noncontrolling

Stock

Stock

Capital

Earnings

Loss

Interests

Equity

Interests

Balances at December 31, 2018

$

645

$

(1,184,243)

$

1,160,048

$

3,958,320

$

301

$

(159,082)

$

3,775,989

$

111,240

Dividends declared

-

-

-

(53,504)

-

-

(53,504)

-

Noncontrolling investors of USS

-

-

-

-

-

-

28,690

Share repurchases

-

(84,308)

-

-

-

-

(84,308)

-

Equity-based compensation

-

6,714

91

(110)

-

-

6,695

-

Net income

-

-

-

204,328

-

499

204,827

-

Other comprehensive loss, net of tax

-

-

-

-

(171)

-

(171)

-

Balances at March 31, 2019

$

645

$

(1,261,837)

$

1,160,139

$

4,109,034

$

130

$

(158,583)

$

3,849,528

$

139,930

Stockholders of Steel Dynamics, Inc.

Accumulated

Additional

Other

Redeemable

Common

Treasury

Paid-In

Retained

Comprehensive

Noncontrolling

Total

Noncontrolling

Stock

Stock

Capital

Earnings

Income (Loss)

Interests

Equity

Interests

Balances at December 31, 2018

$

645

$

(1,184,243)

$

1,160,048

$

3,958,320

$

301

$

(159,082)

$

3,775,989

$

111,240

Dividends declared

-

-

-

(53,504)

-

-

(53,504)

-

Noncontrolling investors of USS

-

-

-

-

-

-

28,690

Share repurchases

-

(84,308)

-

-

-

-

(84,308)

-

Equity-based compensation

-

6,714

91

(110)

-

-

6,695

-

Net income

-

-

-

204,328

-

499

204,827

-

Other comprehensive loss, net of tax

-

-

-

-

(171)

-

(171)

-

Balances at March 31, 2019

645

(1,261,837)

1,160,139

4,109,034

130

(158,583)

3,849,528

139,930

Dividends declared

-

-

-

(52,751)

-

-

(52,751)

-

Share repurchases

-

(93,136)

-

-

-

-

(93,136)

-

Equity-based compensation

-

816

7,366

(166)

-

-

8,016

-

Net income

-

-

-

194,302

-

2,444

196,746

-

Other comprehensive loss, net of tax

-

-

-

-

(52)

-

(52)

-

Balances at June 30, 2019

645

(1,354,157)

1,167,505

4,250,419

78

(156,139)

3,908,351

139,930

Dividends declared

-

-

-

(51,778)

-

-

(51,778)

-

Noncontrolling investors of USS

-

-

-

-

-

(1,321)

(1,321)

3,684

Share repurchases

-

(114,950)

-

-

-

-

(114,950)

-

Equity-based compensation

-

29

8,007

(166)

-

-

7,870

-

Net income

-

-

-

151,048

-

1,560

152,608

-

Other comprehensive loss, net of tax

-

-

-

-

(39)

-

(39)

-

Balances at September 30, 2019

$

645

$

(1,469,078)

$

1,175,512

$

4,349,523

$

39

$

(155,900)

$

3,900,741

$

143,614

79

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 5.7. Derivative Financial Instruments

The company is exposed to certain risks relating to its ongoing business operations. The company utilizes derivative instruments to mitigate commodity margin risk, and occasionally to mitigate foreign currency exchange rate risk, and have in the past to mitigate interest rate fluctuation risk. The company routinely enters into forward exchange traded futures and option contracts to manage the price risk associated with nonferrous metals inventory as well as purchases and sales of nonferrous and ferrous metals (primarily aluminum and copper). The company offsets fair value amounts recognized for derivative instruments executed with the same counterparty under master netting agreements.

Commodity Futures Contracts. If the company is “long” on futures contracts, it means the company has more futures contracts purchased than futures contracts sold for the underlying commodity. If the company is “short” on a futures contract, it means the company has more futures contracts sold than futures contracts purchased for the underlying commodity. The following summarizes the company’s significant futures contract commitments as of March 31,September 30, 2020:

Commodity Futures

Long/Short

��

Metric Tons

Aluminum

Long

1,4251,850

Aluminum

Short

4,4753,450

Copper

Long

8,7664,831

Copper

Short

13,56216,284

The following summarizes the location and amounts of the fair values reported on the company’s consolidated balance sheets as of March 31,September 30, 2020, and December 31, 2019, and gains and losses related to derivatives included in the company’s statement of income for the three-monththree- and nine-month periods ended March 31,September 30, 2020, and 2019 (in thousands):

Asset Derivatives

Liability Derivatives

Asset Derivatives

Liability Derivatives

Balance sheet

Fair Value

Fair Value

Balance sheet

Fair Value

Fair Value

 location

March 31, 2020

December 31, 2019

March 31, 2020

December 31, 2019

 location

September 30, 2020

December 31, 2019

September 30, 2020

December 31, 2019

Derivative instruments designated as hedges

Commodity futures

Other current assets

$

3,283

$

966

$

2,441

$

1,011

Other current assets

$

2,012

$

966

$

827

$

1,011

Derivative instruments not designated as hedges

Commodity futures

Other current assets

2,111

310

2,598

721

Other current assets

949

310

667

721

Total derivative instruments

$

5,394

$

1,276

$

5,039

$

1,732

$

2,961

$

1,276

$

1,494

$

1,732

The fair value of the above derivative instruments along with required margin deposit amounts with the same counterparty under master netting arrangements totaled $2.6$3.5 million at March 31,September 30, 2020, and $3.7 million at December 31, 2019, and are reflected in other current assets in the consolidated balance sheets.

Amount of gain (loss)

Amount of gain (loss)

recognized in income

Location of gain

recognized in income

Location of gain

on derivatives for the

(loss) recognized

on derivatives for the

(loss) recognized

three months ended

Hedged items in

in income on

three months ended

in income on

March 31,

fair value hedge

related hedged

March 31,

derivatives

2020

2019

relationships

items

2020

2019

Derivatives in fair value

hedging relationships

Commodity futures

Costs of goods sold

$

838

$

(1,453)

Firm commitments

Costs of goods sold

$

1,739

$

(1,499)

Inventory

Costs of goods sold

(1,239)

721

Derivatives not designated

$

500

$

(778)

as hedging instruments

Commodity futures

Costs of goods sold

$

10,939

$

(4,077)

Derivatives accounted for as fair value hedges had ineffectiveness resulting in losses of $61,000 and $1.1 million during the three-month periods ended March 31, 2020, and 2019, respectively. Gains excluded from hedge effectiveness testing of $1.4 million decreased cost of goods sold during the three-month period ended March 31, 2020. Losses excluded from hedge effectiveness testing of $2.2 million increased cost of goods sold during the three-month period ended March 31, 2019.

810

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 5. Derivative Financial Instruments (Continued)

Derivatives accounted for as cash flow hedges resulted in net gains of $11,000 and $58,000 recognized in other comprehensive income for the three-month periods ended March 31, 2020, and 2019, respectively. Net losses of $37,000 and net gains of $283,000 were reclassified from accumulated other comprehensive income for the three-month periods ended March 31, 2020, and 2019, respectively. At March 31, 2020, the company expects to reclassify all $39,000 of net gains on derivative instruments from accumulated other comprehensive income to earnings during the next 12 months due to the settlement of futures contracts.

Note 7. Derivative Financial Instruments (Continued)

Amount of gain (loss)

Amount of gain (loss)

recognized in income

Location of gain

recognized in income

Location of gain

on derivatives for the

(loss) recognized

on derivatives for the

(loss) recognized

three months ended

Hedged items in

in income on

three months ended

in income on

September 30,

fair value hedge

related hedged

September 30,

derivatives

2020

2019

relationships

items

2020

2019

Derivatives in fair value

hedging relationships

Commodity futures

Costs of goods sold

$

3,545

$

302

Firm commitments

Costs of goods sold

$

(2,156)

$

(519)

Inventory

Costs of goods sold

(1,682)

(182)

Derivatives not designated

$

(3,838)

$

(701)

as hedging instruments

Commodity futures

Costs of goods sold

$

(10,289)

$

4,536

Amount of gain (loss)

Amount of gain (loss)

recognized in income

Location of gain

recognized in income

Location of gain

on derivatives for the

(loss) recognized

on derivatives for the

(loss) recognized

nine months ended

Hedged items in

in income on

nine months ended

in income on

September 30,

fair value hedge

related hedged

September 30,

derivatives

2020

2019

relationships

items

2020

2019

Derivatives in fair value

hedging relationships

Commodity futures

Costs of goods sold

$

1,096

$

(560)

Firm commitments

Costs of goods sold

$

(901)

$

(603)

Inventory

Costs of goods sold

(342)

245

Derivatives not designated

$

(1,243)

$

(358)

as hedging instruments

Commodity futures

Costs of goods sold

$

(639)

$

5,946

Derivatives accounted for as fair value hedges had ineffectiveness resulting in gains of $110,000 and $69,000 during the three-month periods ended September 30, 2020, and 2019, respectively, and gains of $51,000 and $101,000 during the nine-month periods ended September 30, 2020, and 2019, respectively. Losses excluded from hedge effectiveness testing of $403,000 and $399,000 increased cost of goods sold during the three-month periods ended September 30, 2020, and 2019, respectively. Losses excluded from hedge effectiveness testing of $198,000 and $918,000 increased cost of goods sold during the nine-month periods ended September 30, 2020, and 2019, respectively.

Derivatives accounted for as cash flow hedges resulted in net losses of $274,000 and $8,000 recognized in other comprehensive income for the three-month periods ended September 30, 2020, and 2019, respectively, and net gains of $217,000 and $139,000 for the nine-month periods ended September 30, 2020, and 2019, respectively. Net losses of $115,000 and net gains of $43,000 were reclassified from accumulated other comprehensive income for the three-month periods ended September 30, 2020, and 2019, respectively, and net gains of $84,000 and $43,000 for the nine-month periods ended September 30, 2020, and 2019, respectively. At September 30, 2020, the company expects to reclassify all $124,000 of net gains on derivative instruments from accumulated other comprehensive income to earnings during the next 12 months due to the settlement of futures contracts.

Note 6.8. Fair Value Measurements

Accounting standards provide a comprehensive framework for measuring fair value and sets forth a definition of fair value and establishes a hierarchy prioritizing the inputs to valuation techniques, giving the highest priority to quoted prices in active markets for identical assets and liabilities and the lowest priority to unobservable value inputs. Levels within the hierarchy are defined as follows:

Level 1—Unadjusted quoted prices for identical assets and liabilities in active markets;
Level 2—Quoted prices for similar assets and liabilities in active markets (other than those included in Level 1) which are observable for the asset or liability, either directly or indirectly; and
Level 3—Valuations derived from valuation techniques in which one or more significant inputs or significant value drivers are unobservable.

11

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 8. Fair Value Measurements (Continued)

The following table sets forth financial assets and liabilities measured at fair value on a recurring basis in the consolidated balance sheet and the respective levels to which the fair value measurements are classified within the fair value hierarchy as of March 31,September 30, 2020, and December 31, 2019 (in thousands):

Quoted Prices

Significant

Quoted Prices

Significant

in Active

Other

Significant

in Active

Other

Significant

Markets for

Observable

Unobservable

Markets for

Observable

Unobservable

Identical Assets

Inputs

Inputs

Identical Assets

Inputs

Inputs

Total

(Level 1)

(Level 2)

(Level 3)

Total

(Level 1)

(Level 2)

(Level 3)

March 31, 2020

Short-term investments

$

219,193

$

-

$

219,193

$

-

September 30, 2020

Commodity futures – financial assets

5,394

-

5,394

-

$

2,961

$

-

$

2,961

$

-

Commodity futures – financial liabilities

5,039

-

5,039

-

1,494

-

1,494

-

December 31, 2019

Short-term investments

$

262,174

$

-

$

262,174

$

-

$

262,174

$

-

$

262,174

$

-

Commodity futures – financial assets

1,276

-

1,276

-

1,276

-

1,276

-

Commodity futures – financial liabilities

1,732

-

1,732

-

1,732

-

1,732

-

The carrying amounts of financial instruments including cash and equivalents, and restricted cash approximate fair value (Level
(Level
1). The fair values of short-term investments and the commodity futures contracts are estimated by the use of quoted market prices, estimates obtained from brokers, and other appropriate valuation techniques based on references available (Level 2). The fair value of long-term debt, including current maturities, as determined by quoted market prices (Level 2), was approximately $2.6$2.9 billion and $2.8 billion at March 31,September 30, 2020, and December 31, 2019, respectively (with a corresponding carrying amount in the consolidated balance sheet of $2.7 billion at March 31,September 30, 2020 and $2.8 billion at December 31, 2019).

Note 7.9. Commitments and Contingencies

The company is involved in various routine litigation matters, including administrative proceedings, regulatory proceedings, governmental investigations, environmental matters, and commercial and construction contract disputes, none of which are expected to have a material impact on our financial condition, results of operations, or liquidity.

9

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 8.10. Segment Information

The company’s operations are primarily organized and managed by reportable operating segments, which are steel operations, metals recycling operations, and steel fabrication operations. The segment operations are more fully described in Note 1 to the consolidated financial statements. Operating segment performance and resource allocations are primarily based on operating results before income taxes. The accounting policies of the reportable segments are consistent with those described in Note 1 to the consolidated financial statements. Intra-segment sales and any related profits are eliminated in consolidation. Amounts included in the category “Other” are from subsidiary operations that are below the quantitative thresholds required for reportable segments and primarily consist of smaller joint ventures, and the idle Minnesota ironmaking operations. Also included in “Other” are certain unallocated corporate accounts, such as the company’s senior unsecured credit facility, senior notes, certain other investments and certain profit sharing expenses.

12

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 10. Segment Information (Continued)

The company’s segment results, including disaggregated revenue by segment to external, external non-United States, and other segment customers, are as follows (in thousands):

Metals

Steel

Metals

Steel

For the three months ended

Steel

Recycling

Fabrication

Steel

Recycling

Fabrication

March 31, 2020

Operations

Operations

Operations

Other

Eliminations

Consolidated

September 30, 2020

Operations

Operations

Operations

Other

Eliminations

Consolidated

Net sales - disaggregated revenue

External

$

1,860,585

$

234,833

$

220,935

$

120,342

$

-

$

2,436,695

$

1,634,122

$

202,034

$

241,440

$

120,175

$

-

$

2,197,771

External Non-U.S.

81,121

57,024

-

260

-

138,405

62,409

70,429

98

125

-

133,061

Other segments

74,446

336,882

506

88

(411,922)

-

79,253

364,010

5,052

62

(448,377)

-

2,016,152

628,739

221,441

120,690

(411,922)

2,575,100

1,775,784

636,473

246,590

120,362

(448,377)

2,330,832

Operating income (loss)

288,394

5,528

29,163

(46,355)

(1)

(3,044)

273,686

139,466

12,668

39,231

(34,384)

(1)

(1,125)

155,856

Income (loss) before income taxes

273,555

4,305

27,918

(54,240)

(3,282)

(2)

248,256

126,825

12,051

38,374

(42,484)

(1,406)

(2)

133,360

Depreciation and amortization

62,427

11,972

2,748

3,112

-

80,259

63,538

12,368

2,634

3,212

-

81,752

Capital expenditures

193,273

18,223

4,089

1,950

-

217,535

309,421

5,674

5,113

7,439

-

327,647

As of March 31, 2020

As of September 30, 2020

Assets

$

5,458,553

$

918,403

$

405,860

$

1,619,924

(3)

$

(57,817)

(4)

$

8,344,923

$

5,839,628

$

1,026,630

$

373,085

$

1,442,910

(3)

$

(64,697)

(4)

$

8,617,556

Footnotes related to the three months ended March 31, 2020, segment results (in millions):

Footnotes related to the three months ended September 30, 2020, segment results (in millions):

Footnotes related to the three months ended September 30, 2020, segment results (in millions):

(1)

Corporate SG&A

$

(17.2)

(2)

Gross profit decrease from intra-company sales

$

(3.3)

Corporate SG&A

$

(14.2)

(2)

Gross profit decrease from intra-company sales

$

1.4

Company-wide equity-based compensation

(8.2)

Company-wide equity-based compensation

(9.6)

Profit sharing

(21.3)

Profit sharing

(10.5)

Other, net

0.3

Other, net

(0.1)

$

(46.4)

$

(34.4)

(3)

Cash and equivalents

$

1,169.6

(4)

Elimination of intra-company receivables

$

(38.6)

Cash and equivalents

$

1,162.3

(4)

Elimination of intra-company receivables

$

(49.1)

Short-term investments

219.2

Elimination of intra-company debt

(8.1)

Accounts receivable

12.1

Elimination of intra-company debt

(7.2)

Accounts receivable

8.6

Other

(11.1)

Inventories

61.9

Other

(8.4)

Inventories

21.1

$

(57.8)

Property, plant and equipment, net

152.8

$

(64.7)

Property, plant and equipment, net

148.8

Intra-company debt

7.2

Intra-company debt

8.1

Other

46.6

Other

44.5

$

1,442.9

$

1,619.9

1013

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 10. Segment Information (Continued)

Metals

Steel

For the three months ended

Steel

Recycling

Fabrication

September 30, 2019

Operations

Operations

Operations

Other

Eliminations

Consolidated

Net sales - disaggregated revenue

External

$

1,838,682

$

230,086

$

245,914

$

77,330

$

-

$

2,392,012

External Non-U.S.

83,845

50,823

165

-

-

134,833

Other segments

85,678

293,999

637

100

(380,414)

-

2,008,205

574,908

246,716

77,430

(380,414)

2,526,845

Operating income (loss)

234,683

(101)

35,280

(42,441)

(1)

624

228,045

Income (loss) before income taxes

217,699

(1,159)

34,080

(49,780)

411

(2)

201,251

Depreciation and amortization

63,170

11,769

2,941

1,590

-

79,470

Capital expenditures

40,818

11,498

3,759

98,056

-

154,131

Footnotes related to the three months ended September 30, 2019, segment results (in millions):

(1)

Corporate SG&A

$

(15.4)

(2)

Gross profit increase from intra-company sales

$

0.4

Company-wide equity-based compensation

(8.7)

Profit sharing

(17.0)

Other, net

(1.3)

$

(42.4)

Metals

Steel

For the nine months ended

Steel

Recycling

Fabrication

September 30, 2020

Operations

Operations

Operations

Other

Eliminations

Consolidated

Net sales - disaggregated revenue

External

$

5,072,959

$

563,685

$

677,326

$

334,791

$

-

$

6,648,761

External Non-U.S.

193,305

157,217

398

556

-

351,476

Other segments

225,070

960,998

8,735

150

(1,194,953)

-

5,491,334

1,681,900

686,459

335,497

(1,194,953)

7,000,237

Operating income (loss)

595,903

9,481

95,549

(112,828)

(1)

287

588,392

Income (loss) before income taxes

551,392

3,702

92,251

(162,169)

(515)

(2)

484,661

Depreciation and amortization

186,651

36,510

8,119

9,452

-

240,732

Capital expenditures

803,873

27,718

11,566

11,741

-

854,898

Footnotes related to the nine months ended September 30, 2020, segment results (in millions):

(1)

Corporate SG&A

$

(45.9)

(2)

Gross profit decrease from intra-company sales

$

(0.5)

Company-wide equity-based compensation

(27.5)

Profit sharing

(40.0)

Other, net

0.6

$

(112.8)

14

Table of Contents

STEEL DYNAMICS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (UNAUDITED)

Note 8.10. Segment Information (Continued)

Metals

Steel

Metals

Steel

For the three months ended

Steel

Recycling

Fabrication

March 31, 2019

Operations

Operations

Operations

Other

Eliminations

Consolidated

For the nine months ended

Steel

Recycling

Fabrication

September 30, 2019

Operations

Operations

Operations

Other

Eliminations

Consolidated

Net sales - disaggregated revenue

External

$

2,044,491

$

285,725

$

228,429

$

113,248

$

-

$

2,671,893

$

5,918,189

$

778,637

$

714,782

$

290,219

$

-

$

7,701,827

External Non-U.S.

80,079

65,412

51

-

-

145,542

235,259

176,508

1,201

-

-

412,968

Other segments

75,595

385,908

189

248

(461,940)

-

243,107

1,013,574

826

469

(1,257,976)

-

2,200,165

737,045

228,669

113,496

(461,940)

2,817,435

6,396,555

1,968,719

716,809

290,688

(1,257,976)

8,114,795

Operating income (loss)

309,078

16,962

20,623

(56,920)

(1)

2,099

(2)

291,842

835,172

24,480

86,567

(148,514)

(1)

7,214

804,919

Income (loss) before income taxes

293,019

15,505

19,351

(62,696)

1,884

267,063

784,873

20,846

82,897

(169,914)

6,572

(2)

725,274

Depreciation and amortization

62,512

11,439

2,967

3,256

-

80,174

188,832

34,733

8,882

8,108

-

240,555

Capital expenditures

43,676

6,642

1,993

2,125

-

54,436

128,069

30,313

8,771

126,534

-

293,687

Footnotes related to the three months ended March 31, 2019, segment results (in millions):

Footnotes related to the nine months ended September 30, 2019, segment results (in millions):

Footnotes related to the nine months ended September 30, 2019, segment results (in millions):

(1)

Corporate SG&A

$

(22.6)

(2)

Gross profit decrease from intra-company sales

$

(2.1)

Corporate SG&A

$

(56.0)

(2)

Gross profit increase from intra-company sales

$

6.6

Company-wide equity-based compensation

(9.0)

Company-wide equity-based compensation

(26.1)

Profit sharing

(23.0)

Profit sharing

(61.3)

Other, net

(2.3)

Other, net

(5.1)

$

(56.9)

$

(148.5)

1115

Table of Contents

ITEM 2.    MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Forward-Looking Statements

This report contains some predictive statements about future events, including statements related to conditions in domestic or global economies, conditions in steel and recycled metals market places, Steel Dynamics' revenues, costs of purchased materials, future profitability and earnings, and the operation of new, existing or planned facilities. These statements, which we generally precede or accompany by such typical conditional words as "anticipate", "intend", "believe", "estimate", "plan", "seek", "project", or "expect", or by the words "may", "will", or "should", are intended to be made as "forward-looking", subject to many risks and uncertainties, within the safe harbor protections of the Private Securities Litigation Reform Act of 1995. These statements speak only as of this date and are based upon information and assumptions, which we consider reasonable as of this date, concerning our businesses and the environments in which they operate. Such predictive statements are not guarantees of future performance, and we undertake no duty to update or revise any such statements. Some factors that could cause such forward-looking statements to turn out differently than anticipated include: (1) the effects of uncertain economic conditions; (2) the effects of pandemics or other health issues, such as the recent novel coronavirus outbreak (COVID-19); (3) cyclical and changing industrial demand; (4) changes in conditions in any of the steel or scrap-consuming sectors of the economy which affect demand for our products, including the strength of the non-residential and residential construction, automotive, manufacturing, appliance, energy, and other steel-consuming industries; (5) fluctuations in the cost of key raw materials and supplies (including steel scrap, iron units, zinc, graphite electrodes, and energy costs) and our ability to pass on any cost increases; (6) the impact of domestic and foreign imports, including trade policy, restrictions, or agreements; (7) unanticipated difficulties in integrating or starting up new, acquired or planned businesses or assets; (8) risks and uncertainties involving product and/or technology development; and (9) occurrences of unexpected plant outages or equipment failures.

More specifically, we refer you to our more detailed explanation of these and other factors and risks that may cause such predictive statements to turn out differently, as set forth in our most recent Annual Report on Form 10-K under the headings Special Note Regarding Forward-Looking Statements and Risk Factors for the year ended December 31, 2019, in our quarterly reports on Form 10-Q, or in other reports which we from time to time file with the Securities and Exchange Commission. These reports are available publicly on the Securities and Exchange Commission website, www.sec.gov, and on our website, www.steeldynamics.com under “Investors – SEC Filings.”

Description of the Business

We are one of the largest domestic steel producers and metal recyclers in the United States based on current estimated annual steelmaking and coating capability and actual metals recycling volumes, with one of the most diversified, high-margin steel product portfolios. Our primary sources of revenue are from the manufacture and sale of steel products, the processing and sale of recycled ferrous and nonferrous metals, and the fabrication and sale of steel joists and deck products. We have three reportable segments: steel operations, metals recycling operations, and steel fabrication operations.

Operating Statement Classifications

Net Sales. Net sales from our operations are a factor of volumes shipped, product mix and related pricing. We charge premium prices for certain grades of steel, product dimensions, certain smaller volumes, and for value-added processing or coating of our steel products. Except for the steel fabrication operations, we recognize revenues from sales and the allowance for estimated returns and claims from these sales at the point in time control of the product transfers to the customer, upon shipment or delivery. Our steel fabrication operations recognize revenues over time based on completed fabricated tons to date as a percentage of total tons required for each contract.

Costs of Goods Sold. Our costs of goods sold represent all direct and indirect costs associated with the manufacture of our products. The principal elements of these costs are scrap and scrap substitutes (which represent the most significant single component of our consolidated costs of goods sold), steel substrate, direct and indirect labor and related benefits, alloys, zinc, transportation and freight, repairs and maintenance, utilities such as electricity and natural gas, and depreciation.

Selling, General and Administrative Expenses. Selling, general and administrative expenses consist of all costs associated with our sales, finance and accounting, and administrative departments. These costs include, among other items, labor and related benefits, professional services, insurance premiums, and property taxes. Company-wide profit sharing and amortization of intangible assets are each separately presented in the statement of income.

Interest Expense, net of Capitalized Interest. Interest expense consists of interest associated with our senior credit facilities and other debt net of interest costs that are required to be capitalized during the construction period of certain capital investment projects.

1216

Table of Contents

Other Income,(Income) Expense, net. Other income consists of interest income earned on our temporary cash deposits and short-term investments; any other non-operating income activity, including income from non-consolidated investments accounted for under the equity method. Other expense consists of any non-operating costs, such as certain acquisition and financing expenses.

Impact of COVID-19 on Our Business

In March 2020, the World Health Organization categorized the novel coronavirus (COVID-19) as a pandemic, and since that time, efforts to slow the contagion have impacted global economies. Countries, including the United States, have issued “shelter in place” orders, temporarily closing non-essential businesses and restricting social interactions in thisan effort to slow the spread of COVID-19. States began to reopen during the second quarter 2020, and domestic manufacturing improved.

Due to use of steel in the broad infrastructure and defense framework of the United States, our business operations have beenare designated “essential” as part of the critical infrastructure of all the states in whichwhere we operate. As a result, all of our facilitieslocations continued to operate during the first quarternine months of 2020 and continue to operate.

Our teams are our most valued priority, and among many precautions, we have implemented numerous additional process and procedural initiatives to ensure the health and safety of our people, their families, and our communities. We have adjusted schedules to support social distancing, provided additional and more frequent sanitizing applications, provided additional protective measures, where needed, and many other items.

While the continuing economic impact of COVID-19 had limited impact onnegatively impacted our results of operations during the first quartersecond and third quarters of 2020, we are unable to specifically quantify that impact or predict the ultimate impact it may have on our business, financial condition, results of operations, or cash flow.flow for the remainder of the year. The extent to which our operations may continue to be impacted by COVID-19 will depend on future developments, which are highly uncertain and cannot be accurately predicted, including the possibility of a resurgence or further spread of the virus. In addition, the duration of the pandemic and its eventual impact on domestic and world economies. A prolongedeconomies is not known or estimable. The COVID-19 pandemic could materially reducesignificantly reduced the supply of scrap and other raw materials andthe demand for our products, and thus reduce the productivitysome of our operations, and have a negative impactsteel products during the second quarter 2020, with lingering effects on our results of operations, financial condition, and cash flows.average selling prices impacting third quarter 2020 results. Certain of our suppliers and customers, such as those in the automotive, energy, and related industries, have experienced, and could further experience, temporary shutdowns or significant demand reductions. Reduced demand for our products or lack of ferrous scrap raw material supply due to shutdowns or slowdowns in manufacturing businesses could adversely affect our volumes, selling prices, and margins. However, our low, highly variable cost structure, our diversified value-added product offerings, and our downstream manufacturing businesses which are able to provide base-load “pull-through” volume for our steel operations, support our continued cash flow prospects.

Results Overview

Our consolidated results for the firstthird quarter of 2020 benefitted from recordwere negatively impacted by the continuing COVID-19 pandemic, although the related temporary closures of numerous domestic steel segment shipments and production, while lower average selling pricesconsuming businesses during the second quarter were largely reversed during the third quarter, as most industrial activity resumed. Domestic steel demand rebounded meaningfully during the third quarter 2020 compared to firstthe sequential second quarter, 2019 were a headwind to operating income in ourdriving higher steel and metals recycling segments. Underlying domestic steel demand remained intact during the first quarter 2020, driving steel operations shipments, as well as significantly higher ferrous scrap shipmentsflows and profitability for our metals recycling operations. The non-residential construction market remained strong, with construction activity largely intact during the quarter, resulting in higherrecord third quarter over quarter2020 shipments and operating income for our fabrication operations, with metal margins holding steady in spite of lower average selling prices.operations.

Consolidated operating income decreased $18.2$72.2 million, or 6%32%, to $273.7$155.9 million for the firstthird quarter 2020, compared to the firstthird quarter 2019. FirstThird quarter 2020 net income attributable to Steel Dynamics, Inc. decreased $17.0$50.9 million, or 8%34%, to $187.3$100.1 million, compared to the firstthird quarter 2019, consistent with the decreased operating income.

Consolidated operating income decreased $216.5 million, or 27%, to $588.4 million for the first nine months of 2020, compared to the first nine months of 2019. First nine months 2020 net income attributable to Steel Dynamics, Inc. decreased $186.7 million, or 34%, to $363.0 million, compared to the first nine months of 2019, consistent with the decreased operating income, and due to the additional expenses and interest associated with our June 2020 refinancing of senior notes.

1317

Table of Contents

Segment Operating Results 2020 vs. 2019 (dollars in thousands)

Three Months Ended March 31,

Three Months Ended September 30,

Nine Months Ended September 30,

2020

% Change

2019

2020

% Change

2019

2020

% Change

2019

Net sales:

Steel Operations Segment

$

2,016,152

(8)%

$

2,200,165

$

1,775,784

(12)%

$

2,008,205

$

5,491,334

(14)%

$

6,396,555

Metals Recycling Operations Segment

628,739

(15)%

737,045

636,473

11%

574,908

1,681,900

(15)%

1,968,719

Steel Fabrication Operations Segment

221,441

(3)%

228,669

246,590

( - )%

246,716

686,459

(4)%

716,809

Other

120,690

6%

113,496

120,362

55%

77,430

335,497

15%

290,688

2,987,022

3,279,375

2,779,209

2,907,259

8,195,190

9,372,771

Intra-company

(411,922)

(461,940)

(448,377)

(380,414)

(1,194,953)

(1,257,976)

$

2,575,100

(9)%

$

2,817,435

$

2,330,832

(8)%

$

2,526,845

$

7,000,237

(14)%

$

8,114,795

Operating income (loss):

Steel Operations Segment

$

288,394

(7)%

$

309,078

$

139,466

(41)%

$

234,683

$

595,903

(29)%

$

835,172

Metals Recycling Operations Segment

5,528

(67)%

16,962

12,668

N/A

(101)

9,481

(61)%

24,480

Steel Fabrication Operations Segment

29,163

41%

20,623

39,231

11%

35,280

95,549

10%

86,567

Other

(46,355)

19%

(56,920)

(34,384)

19%

(42,441)

(112,828)

24%

(148,514)

276,730

289,743

156,981

227,421

588,105

797,705

Intra-company

(3,044)

2,099

(1,125)

624

287

7,214

$

273,686

(6)%

$

291,842

$

155,856

(32)%

$

228,045

$

588,392

(27)%

$

804,919

14

Table of Contents

Steel Operations Segment

Steel operations consist of our six electric arc furnace steel mills, producing sheet and long products steel from ferrous scrap and scrap substitutes, utilizing continuous casting and automated rolling mills, with numerous value-added downstream processing and coating lines, as well as IDI, our liquid pig iron production facility that solely supplies solely theour Butler Flat Roll Division. Our steel operations sell a diverse portfolio of value-added sheet and long products directly to end-users, steel fabricators, and service centers. These products are used in a wide variety of industry sectors,industries, including the construction, automotive, manufacturing, transportation, heavy equipment, and agriculture, and energy markets. Steel operations accounted for 75%73% and 76% of our consolidated external net sales during the third quarter of 2020 and 2019, respectively, and 75% and 76% during the first quartersnine months of 2020 and 2019.

Steel Operations Segment Shipments (tons):

Three Months Ended March 31,

Three Months Ended September 30,

Nine Months Ended September 30,

2020

% Change

2019

2020

% Change

2019

2020

% Change

2019

Total shipments

2,847,182

6%

2,684,411

2,682,686

(1)%

2,711,909

8,047,887

(1)%

8,165,678

Intra-segment shipments

(253,477)

(247,403)

(244,185)

(225,399)

(754,881)

(752,826)

Steel Operations Segment shipments

2,593,705

6%

2,437,008

2,438,501

(2)%

2,486,510

7,293,006

(2)%

7,412,852

External shipments

2,495,164

6%

2,347,209

2,310,004

(2)%

2,362,915

6,958,024

(2)%

7,096,975

Graphic

1518

Table of Contents

Graphic

Steel Operations Segment Results 2020 vs. 2019

Overall domesticThe COVID-19 pandemic continued to negatively impact our steel demand remained solidoperations during the firstthird quarter of 2020. In spite of increased sequential quarterly shipments driven by the reopening of numerous steel consuming businesses such as automotive manufacturers and their related supply chain, average selling prices continued to decline, particularly for sheet steel products. Overall segment pricing continued to trend lower in the third quarter of 2020 driving increased quarterly steel segment shipments and record production compared to the firstsame period in 2019. Third quarter of 2019.2020 average selling prices decreased 9%, or $75 per ton, compared to third quarter 2019, reflecting the lag in price recovery during the quarter compared to prior year. Steel operations segment shipments increased 6%decreased only 2% in the firstthird quarter 2020, as compared to the same period in 2019. However, first2019, but increased 8% from second quarter 2020, average selling prices decreased 14% compared to 2019, a period which was still benefitting from the historically highadversely impacted by COVID-19 related steel prices of 2018.consuming business closures. Net sales for the steel operations decreased 8%12% in the firstthird quarter 2020 when compared to the same period in 2019, due primarily to decreasesthe 9% decrease in overallaverage steel selling prices.prices and 2% decrease in shipments. Net sales for the steel operations decreased 14% in the first nine months of 2020 when compared to the same period in 2019, due to the decrease in steel demand primarily due to the COVID-19 pandemic, negatively impacting both steel shipments (down 2%) and average selling prices (down 12%), most notably in the second quarter of 2020.

Metallic raw materials used in our electric arc furnaces represent our single most significant steel manufacturing cost, generally comprising approximately 50 to 60 percent60% of our steel mill operations’ manufacturing costs. Our metallic raw material cost per net ton consumed in our steel operations decreased $71,$16, or 21%6%, in the firstthird quarter 2020, compared to the same period in 2019, consistent with overall decreased domestic scrap pricing. In the first nine months of 2020, our metallic raw material cost per ton decreased $45, or 15% compared to the same period in 2019.

As a result of average selling prices decreasing more than scrap costs, metal spread (which we define as the difference between average steel mill selling prices and the cost of ferrous scrap consumed in our steel mills) decreased 13%11% in the firstthird quarter 2020 compared to the firstthird quarter 2019. Due to this metal spread contraction, more than offsettingcoupled with the increaseslight decrease in shipments, operating income for the steel operations decreased 7%41%, to $288.4$139.5 million, in the firstthird quarter 2020, compared to the same period in 2019. First nine months 2020 operating income decreased 29%, to $595.9 million, compared to the first nine months of 2019, due primarily to an 11% decrease in metal spreads, and to a lesser extent the 2% lower steel shipping volumes.

19

Table of Contents

Metals Recycling Operations Segment

Metals recycling operations consists solelyconsist of OmniSource and includes bothour ferrous and nonferrous scrap metal processing, transportation, marketing, and brokerage services, strategically located primarily in close proximity to our steel mills and other end-user scrap consumers throughout largely the eastern half of the United States.States, as well as in Central and Northern Mexico. In addition, OmniSourceour metals recycling operations designs, installs, and manages customized scrap management programs for industrial manufacturing companies at hundreds of locations throughout North America. Our steel mills utilize a large portion (approximately 65%) of the ferrous scrap sold by OmniSourceour metals recycling operations as raw material in our steelmaking operations, and the remainder is sold to other consumers, such as other steel manufacturers and foundries. In the third quarter 2020, 71% of the metals recycling operations ferrous scrap was sold to our own steel mills, as our steel mills were able to maintain 85% utilization compared to 64% estimated domestic steel mill utilization. Our metals recycling operations accounted for 11%12% and 13%11% of our consolidated external net sales during the third quarter of 2020 and 2019, respectively, and 10% and 12% during the first quartersnine months of 2020 and 2019, respectively.

Metals Recycling Operations Segment Shipments:

Three Months Ended March 31,

Three Months Ended September 30,

Nine Months Ended September 30,

2020

% Change

2019

2020

% Change

2019

2020

% Change

2019

Ferrous metal (gross tons)

Total

1,192,144

2%

1,171,361

1,256,351

7%

1,169,963

3,250,565

(8)%

3,531,003

Inter-company

(798,493)

1%

(788,520)

(886,775)

15%

(773,828)

(2,289,368)

(2)%

(2,326,550)

External shipments

393,651

3%

382,841

369,576

(7)%

396,135

961,197

(20)%

1,204,453

Nonferrous metals (thousands of pounds)

Total

272,078

(7)%

292,038

267,338

4%

257,087

706,330

(13)%

815,347

Inter-company

(40,678)

(39,108)

(42,026)

(31,419)

(122,244)

(105,198)

External shipments

231,400

(9)%

252,930

225,312

( - )%

225,668

584,086

(18)%

710,149

Metals Recycling Operations Segment Results 2020 vs. 2019

Our metals recycling operations were negatively impactedbenefitted from a rebound in manufacturing activity during the firstthird quarter of 2020 by decreased ferrous and nonferrous scrap prices compared to the firstsecond quarter of 2019,2020, which was still buoyedseverely impacted by the historically higherCOVID-19 pandemic. Scrap flows increased as temporary closures of domestic automotive manufacturers and their related supply chain were lifted. In addition, domestic steel andmill utilization rates rose from the trough experienced in the sequential second quarter, resulting in increased ferrous scrap prices of 2018.demand. Net sales decreased 15%increased 11% during the firstthird quarter of 2020 compared to the same period in 2019, driven primarily by decreasedincreased shipments and higher average selling prices. Ferrous shipments to our own steel mills remained relatively flat inscrap average selling prices increased 13% during the firstthird quarter 2020 compared to the same period in 2019, as our steel mill utilization percentage increased from 90% to 94% year over year. Ferrous andwhile average nonferrous scrap average selling prices decreased 9% during the first quarter 2020 compared to the same period in 2019.increased 6%. Ferrous metal spread (which we define as the difference between average selling prices and the cost of purchased scrap) decreased 4%increased 26%, as selling prices decreased more than unprocessed scrap procurement costs, while nonferrous metal spread increased 4% during the third quarter 2020 compared to the same period in 2019. This resulted in metals recycling operations operating income increasing to $12.7 million in the third quarter 2020 compared to the third quarter 2019 operating loss of $101,000.

Net sales for our metals recycling operations decreased 26%.15% in the first nine months of 2020 as compared to the same period in 2019, driven by decreased shipments in conjunction with slowdowns in industrial activity due to the COVID-19 pandemic, most notably in the second quarter. Ferrous and nonferrous scrap average selling prices were flat during the first nine months of 2020 compared to the same period in 2019. Nonferrous metal spread decreased 15%, while ferrous metal spread increased 15% in the first nine months of 2020 compared to the same period in 2019. Metals recycling operations operating income decreased 67% to $5.5 million in the first quarternine months of 2020 compareddecreased 61% to $9.5 million from the first quarternine months of 2019 operating income of $17.0$24.5 million, due primarily to thedecreased ferrous and nonferrous metal spread contraction.

shipments, mostly in the second quarter 2020.

1620

Table of Contents

Steel Fabrication Operations Segment

Steel fabrication operations include our New Millennium Building Systems joist and deck plants located throughout the United States and in Northern Mexico. Revenues from these plants are generated from the fabrication of steel joists, trusses, girders and steel deck used within the non-residential construction industry. Steel fabrication operations accounted for 9% and 8%10% of our consolidated external net sales during the third quarter of 2020 and 2019, and 10% and 9% during the first quartersnine months of 2020 and 2019, respectively.

GraphicGraphic

Steel Fabrication Operations Segment Results 2020 vs. 2019

Net sales for the steel fabrication operations decreased $7.2 million, or 3%,were flat during the firstthird quarter 2020 compared to the same period in 2019, as average selling prices decreased 14%6%, or $89 per ton, while shipments increased 12%.6% to a quarterly record 179,000 tons. Net sales for the segment decreased 4% during the first nine months of 2020, compared to the same period in 2019, as shipments increased 7%, and average selling prices decreased 10%, or $158 per ton. Our steel fabrication operations continue to leverage our national operating footprint. Market demand, orders and backlog continuecontinued to be strong forin the third quarter 2020, indicating resilience of the non-residential construction project development.market during the COVID-19 pandemic.

The purchase of various steel products is the largest single cost of production for our steel fabrication operations, generally representing approximately two-thirds of the total cost of manufacturing. The average cost of steel consumed decreased 24%11% in the firstthird quarter 2020, as compared to the same period in 2019. As a result of steel costs decreasing moreslightly less than selling prices per ton, metal spread (which we define as the difference between average selling prices and the cost of purchased steel) increased slightlydecreased only 1% in the firstthird quarter 2020 compared to the same period in 2019. Operating income increased 41%11% to $29.2a record $39.2 million in the firstthird quarter 2020 compared to the same period in 2019 due primarilyon increased shipments. For the first nine months of 2020, operating income increased 10% to $95.5 million compared to the increasefirst nine months of 2019, as increased shipments more than offset a 2% decrease in shipments.metal spread.

21

Table of Contents

Other Operations

FirstThird Quarter Consolidated Results 2020 vs. 2019

Selling, General and Administrative Expenses. Selling, general and administrative expenses of $112.9$118.2 million during the firstthird quarter 2020 increased 2%10% from $111.0the $107.2 million during the firstthird quarter 2019, representing 5% and 4% of net sales during each period.period, respectively. This increase relates primarily to non-capitalized expenses incurred during construction of our new flat roll steel mill. Profit sharing expense during the firstthird quarter of 2020 of $21.5$11.8 million was down 9%34% from the $23.7$17.8 million during the same period in 2019, consistent with decreases2019. The company-wide profit sharing plan represents 8% of pretax earnings; therefore, our lower third quarter 2020 earnings resulted in pretax income from 2019.lower profit sharing.

17

Table of Contents

Interest Expense, net of Capitalized Interest. During the firstthird quarter 2020, interest expense of $28.0$19.0 million decreased 10%40% from $31.1$31.3 million during the third quarter of 2019, due to decreased interest rates from our December 2019 and June 2020 refinancing of $1.6 billion of high yield senior notes, and increased capitalized interest in 2020 in conjunction with our new flat roll steel mill currently under construction in Sinton, Texas.

Income Tax Expense. Third quarter 2020 income tax expense of $29.1 million, at an effective income tax rate of 21.8%, was down 40% from the $48.6 million, at an effective income tax rate of 24.2%, during the third quarter 2019, consistent with decreased income before income taxes.

First Nine Months Consolidated Results 2020 vs. 2019

Selling, General and Administrative Expenses. Selling, general and administrative expenses of $340.4 million during the first quarternine months of 2020 were up 5% from the $324.5 million during the first nine months of 2019, representing 5% and 4% of net sales, respectively. This increase relates primarily to non-capitalized expenses incurred during construction of our new flat roll steel mill. Profit sharing expense during the first nine months of 2020 of $42.3 million decreased 34% from the $64.4 million during the same period in 2019. The decreasecompany-wide profit sharing plan represents 8% of pretax earnings; therefore, our lower first nine months 2020 earnings resulted in lower profit sharing.

Interest Expense, net of Capitalized Interest. During the first nine months of 2020, interest expense isof $74.7 million decreased 21% from $94.8 million during the first nine months of 2019 due to lower averagedecreased interest rates on increased debt levels from our fourth quarterDecember 2019 and June 2020 refinancing of $1.6 billion of high yield senior note refinancing activity, as well asnotes, and increased capitalized interest in 2020 in conjunction with our new electric arc furnace flat roll steel mill currently under construction in Sinton, Texas.

Income Tax Expense. First quarternine months 2020 income tax expense of $57.4$110.8 million, at an effective income tax rate of 23.1%22.9%, was down 8%35% from the $62.2$171.1 million, at an effective income tax rate of 23.3%23.6%, during the first quarternine months of 2019, consistent with decreased pretax income.income before income taxes.

Liquidity and Capital Resources

Capital Resources and Long-term Debt. Our business is capital intensive and requires substantial expenditures for, among other things, the purchase and maintenance of equipment used in our steel, metals recycling, and steel fabrication operations, and to remain in compliance with environmental laws. Our short-term and long-term liquidity needs arise primarily from working capital requirements, capital expenditures including those related to the flat roll steel mill currently under construction in Sinton, Texas, principal and interest payments related to our outstanding indebtedness (no significant principal payments until 2023), dividends to our shareholders, potential stock repurchases, and acquisitions such as our recently announced planned acquisition of Zimmer, S.A. de C.V., a Mexico ferrous and nonferrous scrap metals recycling business. We have met these liquidity requirements primarily with cash provided by operations and long-term borrowings, and we also have availability under our unsecured Revolver. Our liquidity at March 31, 2020, is as follows (in thousands):

Capital Resources and Long-term Debt. Our business is capital intensive and requires substantial expenditures for, among other things, the purchase and maintenance of equipment used in our steel, metals recycling, and steel fabrication operations, and to remain in compliance with environmental laws. Our short-term and long-term liquidity needs arise primarily from working capital requirements, capital expenditures, currently including those related to our flat roll steel mill under construction in Sinton, Texas, principal and interest payments related to our outstanding indebtedness (no significant principal payments until 2023)2024), dividends to our shareholders, potential stock repurchases, and acquisitions. We have met these liquidity requirements primarily with cash provided by operations and long-term borrowings, and we also have availability under our unsecured Revolver. Our liquidity at March 31,September 30, 2020, is as follows (in thousands):

Cash and equivalents

$

1,235,478

Cash and equivalents

$

1,267,618

Short-term investments

219,193

Revolver availability

1,187,940

Revolver availability

1,188,031

Total liquidity

$

2,455,558

Total liquidity

$

2,642,702

Our total outstanding debt decreased $18.2$15.5 million during the first quarternine months of 2020, primarily due to repayment oflower revolving debt at onetwo of our consolidated joint ventures. Our total long-term debt to capitalization ratio (representing our long-term debt, including current maturities, divided by the sum of our long-term debt, redeemable noncontrolling interests, and our total stockholders’ equity) was 39.8%39.3% and 40.2% at March 31,September 30, 2020, and December 31, 2019, respectively.

22

Table of Contents

In October 2020, we issued $350.0 million of 1.650% notes due 2027 and $400.0 million of 3.250% notes due 2050. The net proceeds from these notes will be used to fund the November 2020 call and redemption of the $350.0 million outstanding principal amount of our 4.125% senior notes due 2025 at a redemption price of 102.063%, plus accrued and unpaid interest to, but not including, the date of redemption, and for general corporate purposes. We will record expenses related to premiums and write off of unamortized debt issuance costs of approximately $10.3 million in other expenses in the fourth quarter of 2020.

In June 2020, we issued $400.0 million of 2.400% notes due 2025 and $500.0 million of 3.250% notes due 2031. The net proceeds from these notes were used to fund the June 2020 call and redemption of the $400.0 million outstanding principal amount of the company’s 5.250% senior notes due 2023 and the $500.0 million outstanding principal amount of the company’s 5.500% senior notes due 2024. We recorded expenses related to premiums, write off of unamortized debt issuance costs, and other expenses of approximately $22.8 million, which are reflected in other expenses in the consolidated statements of income for the second quarter and first nine months 2020.

Our unsecured credit agreement has a senior unsecured revolving credit facility (Facility), which provides a $1.2 billion unsecured Revolver, and matures in December 2024. Subject to certain conditions, we have the opportunity to increase the Facility size by $500.0 million. The unsecured Revolver is available to fund working capital, capital expenditures, and other general corporate purposes. The Facility contains financial covenants and other covenants pertaining to our ability to incur indebtedness and permit liens on property. Our ability to borrow funds within the terms of the unsecured Revolver is dependent upon our continued compliance with the financial and other covenants. At March 31,September 30, 2020, we had $1.2 billion of availability on the Revolver, $12.0$12.1 million of outstanding letters of credit and other obligations which reduce availability, and there were no borrowings outstanding.

The financial covenants under our Facility state that we must maintain an interest coverage ratio of not less than 2.50:1.00. Our interest coverage ratio is calculated by dividing our last-twelve-months (LTM) consolidated adjusted EBITDA (earnings before interest, taxes, depreciation, amortization, and certain other non-cash transactions as allowed in the Facility) by our LTM gross interest expense, less amortization of financing fees. In addition, a debt to capitalization ratio of not more than 0.60:1.00 must be maintained. At March 31,September 30, 2020, our interest coverage ratio and debt to capitalization ratio were 10.54:9.22:1.00 and 0.40:0.39:1.00, respectively. We were, therefore, in compliance with these covenants at March 31,September 30, 2020, and we anticipate we will continue to be in compliance during the next twelve months.

Working Capital. We generated cash flow from operations of $211.3$849.1 million in the first quarternine months of 2020.2020 compared to $987.2 million in the comparable 2019 period. Operational working capital (representing amounts invested in trade receivables and inventories, less current liabilities other than income taxes payable and debt) increased $80.8decreased $182.1 million (21%), to $1.7$1.4 billion at March 31,September 30, 2020, due primarily to decreased inventory and increased accounts receivable consistent with increased sales compared topayable, generating operating cash flows during the fourth quarterfirst nine months of 2019.2020.

Capital Investments. During the first quarternine months of 2020, we invested $217.5$854.9 million in property, plant and equipment, primarily within our steel operations segment, compared with $54.4$293.7 million invested during the same period in 2019. The increase in the first quarternine months of 2020 versus the same period in 2019 period relates primarily to our new flat roll steel mill under construction in Sinton, Texas. We intentionally entered 2020 with sufficient liquidity of $2.8 billion to provide for theour planned 2020 capital requirements, including those necessary to construct the Sinton steel mill. In January 2020, we received the required environmental permitting to allow for full construction efforts, and we anticipate a mid-2021 start-up. For the remainderfourth quarter of 2020, we are planning for capital investments to be roughly $1.2 billion,$400 million, of which the new flat roll steel mill in Sinton, Texas, represents approximately $1.0 billion. This spending for Sinton is heavily weighted to the second half of 2020, which

18

Table of Contents

could be impacted by equipment or other delays due to COVID-19 and related matters. We will continue to assess our capital investment timeline as we gain more visibility into the impact of COVID-19 and could shift some of the planned 2020 investment into 2021 if we believe it is necessary.$360 million.

Cash Dividends. As a reflection of continued confidence in our current and future cash flow generation ability and financial position, we increased our quarterly cash dividend by 4% to $0.2500$0.25 per share in the first quarter 2020 (from $0.2400$0.24 per share in 2019), resulting in declared cash dividends of $52.6$157.8 million during the first quarternine months of 2020, compared to $53.5$158.0 million during the same period in 2019. The slight decrease in declared cash dividends quarterperiod over quarterperiod, after the 4% increase in dividend per share, was due to stock repurchases which took place throughout 2019 and into the first quarter of 2020, reducing our common stock shares outstanding. We paid fourth quarter 2019 declared cash dividends of $51.5$156.7 million ($0.24 per share), and fourth quarter 2018 declared cash dividends of $42.2$148.5 million ($0.1875 per share) during the first quartersnine months of 2020 and 2019, respectively. Our board of directors, along with executive management, approves the payment of dividends on a quarterly basis. The determination to pay cash dividends in the future is at the discretion of our board of directors, after taking into account various factors, including our financial condition, results of operations, outstanding indebtedness, current and anticipated cash needs and growth plans.

23

Table of Contents

Other. In August 2018, our board of directors authorized a share repurchase program of up to $750 million of our common stock. In February 2020, our board authorized an additional share repurchase program of up to $500 million. Under the share repurchase programs, purchases will take place, as and when, we determine in open market or private transactions made based upon the market price of our common stock, the nature of other investment opportunities or growth projects, our cash flows from operations, and general economic conditions. The share repurchase programs do not require us to acquire any specific number of shares, and may be modified, suspended, extended or terminated by us at any time. We acquired 4.4 million shares of our common stock for $106.5 million in the first quarternine months of 2020, all within the first quarter, fully expending the remaining purchases available under the 2018 program, and leaving $444.0 million remaining available to purchase under the 2020 program. See Part II, Item 2. Unregistered Sales of Equity Securities and Use of Proceeds for additional information.

Our ability to meet our debt service obligations and reduce our total debt will depend upon our future performance which, in turn, will depend upon general economic, financial, business and the ongoing COVID-19 pandemic conditions, along with competition, legislation and regulatory factors that are largely beyond our control. In addition, we cannot assure that our operating results, cash flows, access to credit markets and capital resources will be sufficient for repayment of our indebtedness in the future. We believe that based upon current levels of operations and anticipated growth, cash flows from operations, together with other available sources of funds, including if necessary borrowings under our Revolver, through its term,if necessary, will be adequate for the next twelve months for making required payments of principal and interest on our indebtedness, funding working capital requirements, and anticipated capital expenditures noted above.

ITEM 3.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Commodity Risk

In the normal course of business, we are exposed to the market risk and price fluctuations related to the sale of our products and to the purchase of raw materials used in our operations, such as metallic raw materials, electricity, natural gas and its transportation services, fuel, air products, zinc, and electrodes. Our risk strategy associated with product sales has generally been to obtain competitive prices for our products and to allow operating results to reflect market price movements dictated by supply and demand.

Our risk strategy associated with the purchase of raw materials utilized within our operations has generally been to make some commitments with suppliers relating to future expected requirements for some commodities such as electricity, water, natural gas and its transportation services, fuel, air products, zinc, and electrodes. Certain of these commitments contain provisions which require us to “take or pay” for specified quantities without regard to actual usage for periods of generally up to 5 years for physical commodity requirements and commodity transportation requirements, with some extending beyond, and for up to 13 remaining years for air products. We utilized such “take or pay” requirements during the past three years under these contracts, except for certain air products at our idle Minnesota ironmaking operations. We believe that production requirements will be such that consumption of the products or services purchased under these commitments will occur in the normal production process, other than certain air products related to our Minnesota ironmaking operations during the idle period.while idle. We also purchase electricity consumed at our Butler Flat Roll Division pursuant to a contract which extends through December 2020,2022, which establishes an agreed fixed-rate energy charge per Mill/kWh consumed for each year through the expiration of the agreement.

19

Table of Contents

In our metals recycling and steel operations, we have certain fixed price contracts with various customers and suppliers for future delivery of nonferrous and ferrous metals. Our risk strategy has been to enter into base metal financial contracts with the goal to protect the profit margin, within certain parameters, that was contemplated when we entered into the transaction with the customer or vendor. At March 31,September 30, 2020, we had a cumulative unrealized gainloss associated with these financial contracts of $355,000,$1.5 million, substantially all of which have a settlement date within the next twelve months. We believe the customer contracts associated with the financial contracts will be fully consummated.

24

Table of Contents

ITEM 4.    CONTROLS AND PROCEDURES

(a)Evaluation of Disclosure Controls and Procedures

As required, we carried out an evaluation, under the supervision and with the participation of our principal executive officer and principal financial officer, of the effectiveness of our disclosure controls and procedures, as defined in Rulesrules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the Exchange Act). Based on this evaluation, our principal executive officer and principal financial officer concluded that, as of March 31,September 30, 2020, the end of the period covered by this quarterly report, our disclosure controls and procedures were designed to provide and were effective to provide reasonable assurance that the information required to be disclosed by us in the reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the applicable rules and forms, and that it is accumulated and communicated to our management, including our principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure.

(b)Changes in Internal Controls Over Financial Reporting

No changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) occurred during the fiscal quarter ended March 31,September 30, 2020, that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

2025

Table of Contents

PART II OTHER INFORMATION

ITEM 1.    LEGAL PROCEEDINGS

We are involved in various litigation matters, including administrative proceedings, regulatory proceedings, governmental investigations, environmental matters, and commercial and construction contract disputes, none of which are expected to have a material impact on our financial condition, results of operations, or liquidity.

We may also be involved from time to time in various governmental investigations, regulatory proceedings or judicial actions seeking penalties, injunctive relief, and/or remediation under federal, state and local environmental laws and regulations. The United States EPA has conducted such investigations and proceedings involving us, in some instances along with state environmental regulators, under various environmental laws, including RCRA, CERCLA, the Clean Water Act and the Clean Air Act. Some of these matters have resulted in fines or penalties, for which a total of $450,000$485,000 is recorded in our financial statements as of March 31,September 30, 2020.

ITEM 1A.    RISK FACTORS

Except as stated below, no material changes have occurred to the indicated risk factors as disclosed in our Annual Report on Form 10-K for the year ended December 31, 2019. Additionally, the impact of the COVID-19 pandemic cancould also exacerbate other risks discussed in the Risk Factors section of our Annual Report on Form 10-K for the year ended December 31, 2019.

Pandemics, epidemics, widespread illness or other health issues, such as the recent novel coronavirus outbreak (COVID-19) may adversely affect our business, results of operations, financial condition, cash flows, liquidity, and stock price.

Although we had not experienced the full effects of the recent novel coronavirus outbreak (COVID-19) as of March 31, 2020, theThe COVID-19 pandemic has and may continue to adversely affect our business, results of operations, financial condition, cash flows, liquidity and stock price. Other pandemics, epidemics, widespread illness or other health issues could also adversely affect us. The COVID-19 pandemic has resulted in various government actions globally, including United States federal and state governmental actions designed to slow the spread of the virus.virus and its impacts. These actions have included quarantines, “shelter in place,” “stay at home” and “social distancing” orders, business shutdowns or restrictions, travel restrictions and other mitigation efforts, which, among other things, have impacted and may further impact demand for our products, as well as our supply chain. These measures, along with further voluntary measures by businesses and individuals, have impacted and may further impact our working conditions, productivity and operations, as well as those of our customers, suppliers, vendors and business partners. These mitigation measures have also adversely affected and may continue to adversely affect the United States and world economies, resulting in increased unemployment in the United States and the communities in which we operate. However, due to our variable compensation system that rewards productivity, as well as our low fixed cost structure, we have not and do not expect in the future to significantly reduce our workforce due to the COVID-19 pandemic.

We have been identified by governmental authorities as a critical infrastructure industry and have been deemed an essential business in all of the states in which we operate. This has permitted us to continue to advance our commitment to our customers and meet their demand by operating our business consistent with federal guidelines and state and local orders, including social distancing guidelines. In orderOur teams are our most valued priority, and we have implemented numerous process and procedural initiatives to promoteensure the health and safety of our employees,people, their families and our most critical core value, wecommunities. We have implemented certain procedures, such as remote working accommodations, staggering shifts,adjusted schedules to support social distancing, guidelinesprovided additional and curtailing in person meetingsmore frequent sanitizing applications, provided additional protective measures, and travel.many other items. These health and safety initiatives have not and are not expected to have a material effect on our operations, but further required limitations and restrictions could adversely affect our results of operations.

Additionally, while we have not currently curtailed our operations, a prolonged COVID-19 pandemic or resurgence or further spread of the virus could further materially reduce demand for our products and thus, reduce the productivity of our operations and have a negative impact on our business, results of operations, financial condition and cash flows. Certain of our suppliers and customers, such as those in the automotive, energy and related industries, have experienced temporary shutdowns or significant demand reductions, adversely affecting our operations. Further reduced demand for our products or raw material supply availability due to shutdowns or slowdowns in businesses could further adversely affect our volumes and margins, results of operations, financial condition and cash flows. Prolonged shutdowns of critical equipment suppliers, or their suppliers, to our planned capital improvements, including our under construction Sinton, Texas Flat Roll Steel Mill expected to commence operations mid-year 2021, could, if they were to occur, cause our planned expansions to be delayed. The COVID-19 pandemic has also caused volatility in the financial and capital markets, which has adversely affected our stock price and may adversely affect our ability to access and the costs associated with accessing the debt or equity capital markets, which could adversely affect our liquidity, which as of March 31,September 30, 2020 was approximately $2.6$2.5 billion, consisting of approximately $1.4$1.3 billion in cash and cash equivalents and short-term investments, and $1.2 billion in availability under our undrawn credit facility.

2126

Table of Contents

There is considerable uncertainty regarding the economic and industry impacts, including duration, from the COVID-19 pandemic and the measures introduced to curtail its spread.spread and its impacts. Although these highly uncertain future impacts cannot be reasonably estimated at this time, general economic conditions, business closures, slow payments from customers, increased bankruptcies, and labor restrictions may adversely affect our business, results of operations, financial condition, cash flows, liquidity and stock price. Additionally, the impact of the COVID-19 pandemic could also exacerbate other risks to us, including those discussed in the Risk Factors section of our Annual Report on Form 10-K for the year ended December 31, 2019.

ITEM 2.    UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

(c)Issuer Purchases of Equity Securities

We purchased the following equity securities registered by us pursuant to Section 12 of the Exchange Act during the three months ended March 31, 2020.None.

Period

Total Number of Shares Purchased

Average Price Paid per Share

Total Number of Shares Purchased as Part of Publicly Announced Program (1) (2)

Maximum Dollar Value of Shares That May Yet be Purchased Under the Programs
(
in thousands) (1) (2)

Quarter ended March 31, 2020

January 1 - 31 (1)

443,130

$

30.37

443,130

$

37,081

February 1 - 29 (1) (2)

1,091,569

28.65

1,091,569

505,812

March 1 - 31 (2)

2,867,518

21.55

2,867,518

444,011

4,402,217

4,402,217

(1)On September 4, 2018, we announced that our board of directors had authorized a share purchase program of up to $750.0 million of our common stock. This program was completed in March 2020.
(2)On February 26, 2020, we announced that our board of directors had authorized an additional share purchase program of up to $500.0 million of our common stock.

ITEM 3.    DEFAULTS UPON SENIOR SECURITIES

None.

ITEM 4.    MINE SAFETY DISCLOSURES

Information required to be furnished pursuant to Item 4 concerning mine safety disclosure matters, if applicable, by Section 1503(a) of the Dodd-Frank Wall Street Reform and Consumer Protection Act and Item 104 of Regulation S-K (17 CFR 229.104), is included in Exhibit 95 to this quarterly report.None.

ITEM 5.    OTHER INFORMATION

None.

2227

Table of Contents

ITEM 6.    EXHIBITS

Reference is made to the Exhibit Index preceding the signature page hereto, which Exhibit Index is hereby incorporated into this item.

EXHIBIT INDEX

HIDDEN_ROW

Articles of Incorporation

3.1

Amended and Restated Articles of Incorporation of Steel Dynamics, Inc., reflecting all amendments thereto through May 17, 2018, incorporated herein by reference from Exhibit 3.1e to our Form 10-Q filed August 9, 2018.

3.2

Amended and Restated Bylaws of Steel Dynamics, Inc., reflecting all amendments thereto through October 17, 2018, incorporated herein by reference from Exhibit 3.2d to our Form 10-Q filed November 7, 2018.

Executive Officer Certifications

31.1*

Certification of Chief Executive Officer required by Item 307 of Regulation S-K as promulgated by the Securities and Exchange Commission and pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

31.2*

Certification of Chief Financial Officer required by Item 307 of Regulation S-K as promulgated by the Securities and Exchange Commission and pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

32.1*

Certification of Chief Executive Officer Pursuant to 18 U.S.C Section 1350, as Adopted Pursuant to Section 906
of the Sarbanes-Oxley Act of 2002.

32.2*

Certification of Chief Financial Officer Pursuant to 18 U.S.C Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

OtherInstruments Defining the Rights of Security Holders, Including Indentures

95*4.38

Mine Safety Disclosures.Third Supplemental Indenture, dated as of October 9, 2020, relating to our issuance of $350 million 1.650% Notes due 2027, and $400 million 3.250% Notes due 2050, between Steel Dynamics, Inc. and Wells Fargo Bank, National Association, as Trustee, incorporated herein by reference from Exhibit 4.2 to our Form 8-K filed October 9, 2020.

4.39

Form of 1.650% Notes due 2027 (included in Exhibit 4.38), incorporated herein by reference from Exhibit 4.3 to our Form 8-K filed October 9, 2020.

4.40

Form of 3.250% Notes due 2050 (included in Exhibit 4.38), incorporated herein by reference from Exhibit 4.4 to our Form 8-K filed October 9, 2020.

XBRL Documents

101.INS*

XBRL Instance Document - the instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document.

101.SCH*

XBRL Taxonomy Extension Schema Document

101.CAL*

XBRL Taxonomy Extension Calculation Document

101.DEF*

XBRL Taxonomy Definition Document

101.LAB*

XBRL Taxonomy Extension Label Document

101.PRE*

XBRL Taxonomy Presentation Document

104

Cover Page Interactive Data File – the cover page interactive data file does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document.

*

Filed concurrently herewith

2328

Table of Contents

SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

May 11,November 9, 2020

    

STEEL DYNAMICS, INC.

By:

/s/ Theresa E. Wagler

Theresa E. Wagler

Executive Vice President and Chief Financial Officer

(Principal Financial Officer and Principal Accounting Officer)

2429