Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The number of ordinary shares of the Registrant outstanding as of ~~December 2, 2019~~September 1, 2020 was ~~33,544,802~~34,614,277 shares.

	October 31,		January 31,		July 31,		January 31,
	2019		2019		2020		2020
ASSETS
Current assets:
Cash and cash equivalents	$	252,310	$	194,047	$	220,647	$	231,403
Marketable debt securities		148,481		164,861		190,056		173,345
Accounts receivable, net		21,609		26,212		23,275		18,487
Inventories		19,845		18,252		23,907		22,971
Restricted cash		9		11		10		9
Prepaid expenses and other current assets		5,174		6,206		3,503		4,975
Total current assets		447,428		409,589		461,398		451,190
Property and equipment, net		5,927		6,728		5,027		5,614
Deferred tax assets, non-current		10,320		10,587		10,212		10,400
Intangible assets, net		8,232		10,936		16,088		17,826
Operating lease right-of-use assets, net		10,595		—		8,691		9,935
Goodwill		26,601		26,601		26,601		26,601
Other non-current assets		5,386		2,412		5,381		5,710
Total assets	$	514,489	$	466,853	$	533,398	$	527,276
LIABILITIES AND SHAREHOLDERS' EQUITY
Current liabilities:
Accounts payable		18,697		12,801		13,693		14,910
Accrued and other current liabilities		28,447		24,700		33,156		34,970
Operating lease liabilities, current		2,161		—		2,402		2,181
Income taxes payable		955		993		511		691
Deferred revenue, current		545		529		1,400		701
Total current liabilities		50,805		39,023		51,162		53,453
Operating lease liabilities, non-current		8,519		—		6,911		7,975
Other long-term liabilities		9,925		8,341		16,678		17,776
Total liabilities		69,249		47,364		74,751		79,204
Commitments and contingencies (Note 13)
Shareholders' equity:
Preference shares, $0.00045 par value per share, 20,000,000 shares authorized and 0 shares issued and outstanding at October 31, 2019 and January 31, 2019, respectively		—		—
Ordinary shares, $0.00045 par value per share, 200,000,000 shares authorized at October 31, 2019 and January 31, 2019, respectively; 33,540,324 shares issued and outstanding at October 31, 2019; 32,303,540 shares issued and outstanding at January 31, 2019		15		15
Preference shares, $0.00045 par value per share, 20,000,000 shares authorized and 0 shares issued and outstanding at July 31, 2020 and January 31, 2020, respectively						0		0
Ordinary shares, $0.00045 par value per share, 200,000,000 shares authorized at July 31, 2020 and January 31, 2020, respectively; 34,610,836 shares issued and outstanding at July 31, 2020; 33,805,609 shares issued and outstanding at January 31, 2020						15		15
Additional paid-in capital		245,490		188,516		301,195		261,220
Accumulated other comprehensive income		685		97		1,587		768
Retained earnings		199,050		230,861		155,850		186,069
Total shareholders’ equity		445,240		419,489		458,647		448,072
Total liabilities and shareholders' equity	$	514,489	$	466,853	$	533,398	$	527,276

	Three Months Ended October 31,						Nine Months Ended October 31,						Three Months Ended July 31,						Six Months Ended July 31,
	2019			2018			2019			2018			2020			2019			2020			2019
Revenue	$	67,922		$	57,286		$	171,520		$	176,698		$	50,113		$	56,410		$	104,758		$	103,598
Cost of revenue		28,819			22,701			72,127			69,208			19,155			23,973			41,780			43,308
Gross profit		39,103			34,585			99,393			107,490			30,958			32,437			62,978			60,290
Operating expenses:
Research and development		32,480			31,653			95,917			95,446			32,802			30,420			67,002			63,437
Selling, general and administrative		13,791			12,354			39,293			38,098			13,445			12,425			26,880			25,502
Total operating expenses		46,271			44,007			135,210			133,544			46,247			42,845			93,882			88,939
Loss from operations		(7,168	)		(9,422	)		(35,817	)		(26,054	)		(15,289	)		(10,408	)		(30,904	)		(28,649	)
Other income, net		1,917			993			6,308			2,517			1,280			2,195			2,558			4,391
Loss before income taxes		(5,251	)		(8,429	)		(29,509	)		(23,537	)		(14,009	)		(8,213	)		(28,346	)		(24,258	)
Provision (benefit) for income taxes		(942	)		592			2,302			2,367
Provision for income taxes														747			1,978			1,873			3,244
Net loss	$	(4,309	)	$	(9,021	)	$	(31,811	)	$	(25,904	)	$	(14,756	)	$	(10,191	)	$	(30,219	)	$	(27,502	)
Net loss per share attributable to ordinary shareholders:
Basic	$	(0.13	)	$	(0.28	)	$	(0.97	)	$	(0.79	)	$	(0.43	)	$	(0.31	)	$	(0.88	)	$	(0.84	)
Diluted	$	(0.13	)	$	(0.28	)	$	(0.97	)	$	(0.79	)	$	(0.43	)	$	(0.31	)	$	(0.88	)	$	(0.84	)
Weighted-average shares used to compute net loss per share attributable to ordinary shareholders:
Basic		33,304,171			32,171,890			32,885,729			32,908,614			34,480,307			32,860,974			34,280,318			32,676,509
Diluted		33,304,171			32,171,890			32,885,729			32,908,614			34,480,307			32,860,974			34,280,318			32,676,509

	Three Months Ended October 31,						Nine Months Ended October 31,						Three Months Ended July 31,						Six Months Ended July 31,
	2019			2018			2019			2018			2020			2019			2020			2019
Net loss	$	(4,309	)	$	(9,021	)	$	(31,811	)	$	(25,904	)	$	(14,756	)	$	(10,191	)	$	(30,219	)	$	(27,502	)
Other comprehensive income, net of tax:
Net unrealized gains on investments		140			26			588			94
Unrealized gains on investments														1,182			194			819			448
Other comprehensive income, net of tax		140			26			588			94			1,182			194			819			448
Comprehensive loss	$	(4,169	)	$	(8,995	)	$	(31,223	)	$	(25,810	)	$	(13,574	)	$	(9,997	)	$	(29,400	)	$	(27,054	)

Accumulated

Outstanding

Additional

Other

Ordinary Shares

Paid-in

Comprehensive

Retained

Shares

Amount

Capital

Income (Loss)

Earnings

Total

Balance--January 31, 2019

32,303,540

$
15

$
188,516

$
97

$
230,861

$
419,489

Issuance of shares through employee equity incentive plan

335,301

—

1,520

—

—

1,520

Issuance of shares through employee stock purchase plan

99,759

—

3,063

—

—

3,063

Stock-based compensation expense related to stock awards granted to employees and consultants

—

—

15,423

—

—

15,423

Net unrealized gains on investments - net of taxes

—

—

—

254

—

254

Net loss

—

—

—

—

(17,311
)

(17,311
)
Balance--April 30, 2019

32,738,600

$
15

$
208,522

$
351

$
213,550

$
422,438

Issuance of shares through employee equity incentive plan

295,019

—

988

—

—

988

Stock-based compensation expense related to stock awards granted to employees and consultants

—

—

15,032

—

—

15,032

Net unrealized gains on investments - net of taxes

—

—

—

194

—

194

Net loss

—

—

—

—

(10,191
)

(10,191
)
Balance--July 31, 2019

33,033,619

$
15

$
224,542

$
545

$
203,359

$
428,461

Issuance of shares through employee equity incentive plan

428,600

—

2,711

—

—

2,711

Issuance of shares through employee stock purchase plan

78,105

—

2,904

—

—

2,904

Stock-based compensation expense related to stock awards granted to employees and consultants

—

—

15,333

—

—

15,333

Net unrealized gains on investments - net of taxes

—

—

—

140

—

140

Net loss

—

—

—

—

(4,309
)

(4,309
)
Balance--October 31, 2019

33,540,324

$
15

$
245,490

$
685

$
199,050

$
445,240

	Outstanding						Additional			Other																	Accumulated
	Ordinary Shares						Paid-in			Comprehensive			Retained						Outstanding					Additional			Other
	Shares			Amount			Capital			Income (Loss)			Earnings			Total			Ordinary Shares					Paid-in			Comprehensive			Retained
Balance--January 31, 2018		33,489,614		$	15		$	221,186		$	(279	)	$	261,265		$	482,187
Cumulative effect of change in accounting principle		—			—			—			—			43			43
																			Shares			Amount		Capital			Income			Earnings			Total
Balance--January 31, 2020																				33,805,609		$	15	$	261,220		$	768		$	186,069		$	448,072
Issuance of shares through employee equity incentive plan		272,723			—			305			—			—			305			478,643			0		6,463			0			0			6,463
Issuance of shares through employee stock purchase plan		71,415			—			2,818			—			—			2,818			83,564			0		2,660			0			0			2,660
Stock repurchase		(437,448	)		—			(20,624	)		—			—			(20,624	)		(25,719	)		0		(1,000	)		0			0			(1,000	)
Stock-based compensation expense related to stock awards granted to employees and consultants		—			—			14,195			—			—			14,195			0			0		15,214			0			0			15,214
Net unrealized losses on investments - net of taxes		—			—			—			(110	)		—			(110	)		0			0		0			(363	)		0			(363	)
Net loss		—			—			—			—			(10,006	)		(10,006	)		0			0		0			0			(15,463	)		(15,463	)
Balance--April 30, 2018		33,396,304		$	15		$	217,880		$	(389	)	$	251,302		$	468,808
Balance--April 30, 2020																				34,342,097			15		284,557			405			170,606			455,583
Issuance of shares through employee equity incentive plan		373,126			—			642			—			—			642			268,739			0		344			0			0			344
Stock repurchase		(1,119,193	)		—			(44,989	)		—			—			(44,989	)
Stock-based compensation expense related to stock awards granted to employees and consultants		—			—			15,130			—			—			15,130			0			0		16,294			0			0			16,294
Net unrealized gains on investments - net of taxes		—			—			—			178			—			178			0			0		0			1,182			0			1,182
Net loss		—			—			—			—			(6,877	)		(6,877	)		0			0		0			0			(14,756	)		(14,756	)
Balance--July 31, 2018		32,650,237		$	15		$	188,663		$	(211	)	$	244,425		$	432,892
Balance--July 31, 2020																				34,610,836		$	15	$	301,195		$	1,587		$	155,850		$	458,647

																											Accumulated
																			Outstanding					Additional			Other
																			Ordinary Shares					Paid-in			Comprehensive			Retained
																			Shares			Amount		Capital			Income			Earnings			Total
Balance--January 31, 2019																				32,303,540		$	15	$	188,516		$	97		$	230,861		$	419,489
Issuance of shares through employee equity incentive plan		249,002			—			117			—			—			117			335,301			0		1,520			0			0			1,520
Issuance of shares through employee stock purchase plan		75,472			—			2,318			—			—			2,318			99,759			0		3,063			0			0			3,063
Stock repurchase		(825,191	)	$	(1	)		(30,804	)		—			—			(30,805	)
Stock-based compensation expense related to stock awards granted to employees and consultants		—			—			15,612			—			—			15,612			0			0		15,423			0			0			15,423
Net unrealized gains on investments - net of taxes		—			—			—			26			—			26			0			0		0			254			0			254
Net loss		—			—			—			—			(9,021	)		(9,021	)		0			0		0			0			(17,311	)		(17,311	)
Balance--October 31, 2018		32,149,520		$	14		$	175,906		$	(185	)	$	235,404		$	411,139
Balance--April 30, 2019																				32,738,600			15		208,522			351			213,550			422,438
Issuance of shares through employee equity incentive plan																				295,019			0		988			0			0			988
Stock-based compensation expense related to stock awards granted to employees and consultants																				0			0		15,032			0			0			15,032
Net unrealized gains on investments - net of taxes																				0			0		0			194			0			194
Net loss																				0			0		0			0			(10,191	)		(10,191	)
Balance--July 31, 2019																				33,033,619		$	15	$	224,542		$	545		$	203,359		$	428,461

	Nine Months Ended October 31,						Six Months Ended July 31,
	2019			2018			2020			2019
Cash flows from operating activities:
Net loss	$	(31,811	)	$	(25,904	)	$	(30,219	)	$	(27,502	)
Adjustments to reconcile net loss to net cash provided by operating activities:
Depreciation and amortization		8,231			5,355			5,786			5,439
Amortization/accretion of marketable debt securities		(879	)		(311	)		88			(696	)
Stock-based compensation		49,968			44,937			32,430			32,660
Deferred income taxes								188			170
Other non-cash items, net		87			358			(72	)		87
Changes in operating assets and liabilities:
Accounts receivable		4,603			(1,123	)		(4,788	)		(1,728	)
Inventories		(1,593	)		55			(936	)		876
Prepaid expenses and other current assets		857			700			1,472			1,541
Deferred tax assets		267			(285	)
Other assets		(2,974	)		(213	)		329			(2,834	)
Accounts payable		5,896			(8,681	)		(1,217	)		6,111
Accrued liabilities		3,658			(5,192	)		2,144			(288	)
Income taxes payable		(38	)		(181	)		(180	)		90
Deferred revenue		16			140			699			24
Lease Liabilities		(2,238	)		—			(1,031	)		(1,454	)
Other long-term liabilities		1,234			843			529			923
Net cash provided by operating activities		35,284			10,498			5,222			13,419
Cash flows from investing activities:
Purchase of investments		(160,988	)		(139,816	)		(109,161	)		(91,143	)
Sales of investments		72,773			50,618			44,044			32,573
Maturities of investments		105,995			40,928			49,227			71,395
Purchase of property and equipment		(1,425	)		(2,380	)		(665	)		(954	)
Net cash provided by (used in) investing activities		16,355			(50,650	)		(16,555	)		11,871
Cash flows from financing activities:
Stock repurchase		—			(96,419	)		(1,000	)		—
Proceeds from exercise of stock options and employee stock purchase plan		9,552			4,722			3,866			5,429
Payment for intangible asset		(2,930	)		(2,483	)		(2,288	)		(2,075	)
Net cash provided by (used in) financing activities		6,622			(94,180	)
Net cash provided by financing activities								578			3,354
Net increase (decrease) in cash, cash equivalents and restricted cash		58,261			(134,332	)		(10,755	)		28,644
Cash, cash equivalents and restricted cash at beginning of period		194,058			346,681			231,412			194,058
Cash, cash equivalents and restricted cash at end of period	$	252,319		$	212,349		$	220,657		$	222,702
Supplemental disclosure of cash flow information:
Cash paid for income taxes	$	1,664		$	1,263		$	842		$	1,283
Supplemental disclosure of noncash investing and financing activities:
Unpaid liabilities related to intangible and fixed assets additions	$	618		$	299		$	1,174		$	347

Ambarella, Inc. (the “Company”) was incorporated in the Cayman Islands on January 15, 2004. The Company is a leading developer of low-power semiconductor solutions offering high-definition (HD) and Ultra HD ~~video~~ compression, ~~and~~ image processing, ~~solutions,~~ and ~~computer vision solutions.~~deep neural network processing. The Company combines its processor design capabilities with its expertise in video and image processing, algorithms and software to provide a technology platform that is designed to be easily scalable across multiple applications and enable rapid and efficient product development. The Company’s system-on-a-chip, or SoC, designs fully ~~integrated~~integrate high-definition video processing, image processing, ~~analysis,~~artificial intelligence (AI) computer vision algorithms, audio processing and system functions onto a single chip, delivering exceptional video and image quality, differentiated functionality and low power consumption. ~~Currently the~~The Company is ~~combining advanced~~currently addressing a broad range of human and computer vision ~~technology with its state-of-the-art video to enable the next generation of intelligent~~applications, including professional and consumer security cameras, automotive cameras such as advanced driver assistance systems (ADAS), electronic ~~mirror,~~mirrors, drive ~~recorder,~~recorders, driver/cabin monitoring systems, autonomous driving, and ~~other~~industrial and robotic applications.

The Company sells its solutions to leading original design manufacturers, or ODMs, and original equipment manufacturers, or OEMs, globally.

The accompanying unaudited condensed consolidated financial statements have been prepared by the Company in accordance with the instructions to Form 10-Q pursuant to the rules and regulations of the Securities and Exchange Commission (“SEC”) and, therefore, do not include all information and notes normally provided in audited financial statements. The accounting policies are described in the “Notes to Consolidated Financial Statements” in the Annual Report on Form 10-K for the ~~2019~~2020 fiscal year filed with the SEC on March ~~29, 2019~~27, 2020 (the “Form 10-K”) and updated, as necessary, in this Form 10-Q. The year-end condensed consolidated balance sheet data presented for comparative purposes was derived from audited financial statements, but does not include all disclosures required by generally accepted accounting principles in the United States (“U.S. GAAP”). In the opinion of management, all adjustments (consisting of normal recurring accruals and adjustments) considered necessary for a fair statement have been included. The results of operations for any interim period are not necessarily indicative of, nor comparable to, the results of operations for any other interim period or for a full fiscal year. These unaudited condensed consolidated financial statements should be read in conjunction with the consolidated financial statements and related notes contained in the Form 10-K.

The Company’s fiscal year ends on January 31. The condensed consolidated financial statements of the Company and its subsidiaries have been prepared in conformity with U.S. GAAP. All intercompany transactions and balances have been eliminated upon consolidation.

The preparation of condensed consolidated financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expense during the reported periods. Actual results could differ from those estimates.

On an ongoing basis, management evaluates its estimates and assumptions, including those related to (i) the collectability of accounts receivable; (ii) write down of excess and obsolete inventories; (iii) intangible assets and goodwill; (iv) the estimated useful lives of long-lived assets; (v) impairment of long-lived assets and financial instruments; (vi) warranty obligations; (vii) the valuation of stock-based compensation awards and financial instruments; (viii) the probability of performance objectives achievement; (ix) the realization of tax assets and estimates of tax liabilities, including reserves for uncertain tax positions; and (x) the recognition and disclosure of contingent liabilities. These estimates and assumptions are based on historical experience and on various other factors which the Company believes to be reasonable under the circumstances. The Company may engage third-party valuation specialists to assist with estimates related to the valuation of financial instruments, assets and stock awards associated with various contractual arrangements. Such estimates often require the selection of appropriate valuation methodologies and significant judgment. Actual results could differ from these estimates under different assumptions or circumstances and such differences could be material.

The Company also assessed the impacts of COVID-19 on the above accounting matters as of July 31, 2020 and through the date of this report. While it is difficult to quantify the impact of COVID-19, the future magnitude and duration of COVID-19, as well as other associated factors, could result in material negative impacts to its condensed consolidated financial statements in future reporting periods.

The Company’s products are manufactured, assembled and tested by third-party contractors located primarily in Asia. The Company does not have long-term agreements with these contractors. A significant disruption in the operations of one or more of these contractors would impact the production of the Company’s products which could have a material adverse effect on its business, financial condition and results of operations.

A substantial portion of the Company’s revenue is derived from sales through one of its distributors, Wintech Microelectronics Co., Ltd., or Wintech, which serves as its non-exclusive sales representative in Asia other than Japan, and directly to one ODM customer, Chicony Electronics Co., Ltd., or Chicony. Termination of the relationships with these customers could result in a temporary or permanent loss of revenue. Furthermore, any credit issues from these customers could impair their abilities to make timely payment to the Company. See Note 14 for additional information regarding revenue and credit concentration with these customers.

Financial instruments that potentially subject the Company to concentrations of credit risk consist primarily of cash, cash equivalents, marketable debt securities and accounts receivable. The Company maintains its cash primarily in checking accounts with reputable financial institutions. Cash deposits held with these financial institutions may exceed the amount of insurance provided on such deposits. The Company has not experienced any losses on deposits of its cash. In order to limit the exposure of each investment, the cash equivalents and marketable debt securities consist primarily of money market funds, asset-backed securities, commercial paper, U.S. government securities and debt securities of corporations which management assesses to be highly liquid. The Company does not hold or issue financial instruments for trading purposes.

The Company performs ongoing credit evaluations of its customers and adjusts credit limits based upon payment history and customers’ credit worthiness. The Company regularly monitors collections and payments from its customers.

On February 1, 2020, the Company adopted Accounting Standards Update (ASU) No. 2016-13, Financial Instruments-Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments, using the modified retrospective transition method. Under this new guidance, the Company recognizes credit losses based on a forward-looking current expected credit losses (CECL) model instead of the previous incurred loss model for financial instruments, including accounts receivable. The Company’s accounts receivable are recorded at invoiced amount less an allowance for any potentially uncollectible amounts. Accordingly, the Company makes estimates of expected credit losses for the allowance for doubtful accounts based upon its assessment of various factors, including historical collection experience, the age of the accounts receivable balances, credit quality of its customers, current economic conditions, reasonable and ~~Marketable Debt Securities~~supportable forecasts of future economic conditions, and other factors that may affect its ability to collect from customers.

The Company considers all highly liquid debt security investments with original maturities of less than three months at the time of purchase to be cash equivalents. Debt security investments that are highly liquid with original maturities at the time of purchase greater than three months are considered marketable debt securities.

The Company classifies these investments as “available-for-sale” ~~securities carried at~~(AFS) securities. Instead of the previous "other than temporary" impairment model, the Company now estimates the expected losses whenever a security’s fair value ~~based on quoted market prices of similar assets,~~is below its amortized cost basis. The expected loss is computed at an individual security level using the discounted cash flow method with the ~~unrealized gains~~effective interest rate on the purchase date. In the determination of credit-related losses, the Company excludes securities with zero loss expectation such as assets backed by government agencies. There are various factors considered in its assessment of credit-related losses, including the extent to which the fair value is less than the amortized cost basis, adverse conditions related to an industry or ~~losses reported,~~an underlying loan obligator, the payment structure of the security, changes to the rating of the security and other factors that may affect the security credit. The credit-related portion of the loss is recognized in other income, net in the condensed consolidated statements of ~~tax, as a separate component~~operations but is limited to the difference between the fair value and the amortized cost basis of ~~shareholders’ equity and included~~the security, adjusted for accrued interest. The non-credit-related portion of the loss is recognized in accumulated other comprehensive income in the condensed consolidated balance sheets.

The ~~amortization of premiums~~cumulative effect adjustment upon the adoption on February 1, 2020 was immaterial. The credit-related losses and accretion of discounts and the realized gains and losses are both recorded in other income, net, in the condensed consolidated statements of operations. The Company reviews its investments for possible other-than-temporary impairments on a regular basis. If any loss on investment is believed to be other-than-temporary, a charge will be recorded and a new cost basis in the investment will be established. In evaluating whether a loss on a security is other-than-temporary, the Company considers the following factors: (i) general market conditions, (ii) the duration and extent to which the fair value is less than cost and (iii)associated allowance amount from the Company’s ~~intent and ability to hold the investment.~~

For securities in an unrealized loss position which is deemed to be other-than-temporary, the difference between the security’s then-current amortized cost basis and fair value is separated into (i) the amountfinancial instruments were not material as of the impairment related to the credit loss (i.e., the credit loss component) and (ii) the amount of the impairment related to all other factors (i.e., the non-credit loss component). The credit loss component is recognized in earnings. The non-credit loss component is recognized in accumulated other comprehensive loss. Due to the relative short term nature of the investments, there have been no other-than-temporary impairments recorded to date.July 31, 2020, respectively.

Amounts included in restricted cash represent those required to be set aside to secure certain transactions in a foreign entity. As of ~~October~~both July 31, ~~2019~~2020 and January 31, ~~2019, the~~2020, restricted cash was immaterial. The following table presents cash, cash equivalents and restricted cash reported on the condensed consolidated balance sheets, and the sums are presented on the condensed consolidated statements of cash flows:

	As of								As of
	October 31, 2019		January 31, 2019		October 31, 2018		January 31, 2018		July 31, 2020		January 31, 2020		July 31, 2019		January 31, 2019
	(in thousands)								(in thousands)
Cash and cash equivalents	$	252,310	$	194,047	$	212,338	$	346,672	$	220,647	$	231,403	$	222,693	$	194,047
Restricted cash		9		11		11		9		10		9		9		11
Total as presented in the consolidated statements of cash flows	$	252,319	$	194,058	$	212,349	$	346,681	$	220,657	$	231,412	$	222,702	$	194,058

The Company records inventories at the lower of cost or net realizable value. The cost includes materials and other production costs and is computed using standard cost on a first-in, first-out basis. Inventory reserves are recorded for estimated obsolescence or unmarketable inventories based on forecast of future demand and market conditions. Any adjustments to reduce the cost of inventories to their net realizable value are recognized in earnings in the current period. Once inventory is written down, a new accounting cost basis is established and, accordingly, any associated reserve is not released until the inventory is sold or scrapped. There were 0 material inventory losses recognized for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019~~2020 and ~~2018,~~2019, respectively.

The Company accounts for a noncancelable on premise internal-use software license as the acquisition of an intangible asset and the incurrence of a liability to the extent that all or a portion of the software licensing fees are not paid on or before the license acquisition date. The intangible asset and related liability are recorded at net present value and interest expense is recorded over the payment term.

~~Effective February 1, 2019, the~~The Company adopted Accounting Standards Codification (“ASC”) Topic 842, Leases ~~using the alternative transition method with an adjustment to the opening balance~~ in ~~the period of adoption without adjustment of comparative period financial statements. Under this new guidance,~~fiscal year 2020. As a result, the Company recognizes leases as operating lease right-of-use (“ROU”) assets and corresponding lease liabilities at the lease commencement date based on the present value of future lease payments, while recognizing lease expenses under straight-line method through the lease term. The Company also elected the ~~other available~~ practical ~~expedients, and has elected~~expedient that does not to recognize ROU assets and lease liabilities that arise from short-term (12 months or less) ~~leases and not to reassess the following for existing leases as of February 1, 2019: (i) whether contracts are or contain leases, (ii) lease classification, and (iii) initial direct costs.~~leases. The Company does not combine lease components with non-lease components, and as a result, the non-lease components are accounted for separately. In determining the present value of lease payments, the Company uses the implicit interest rate if readily determinable. When the implicit rate is not readily determinable, the Company uses its incremental borrowing rate based on the information available at the lease commencement date. The Company's leases mainly include its worldwide office facilities which are all classified as operating leases. Certain leases include renewal options that are under the Company's discretion. The renewal options are included in the ROU and liability calculation if it is reasonably certain that the Company will exercise the option. As of February 1, 2019, the Company recognized approximately $8.6 million of ROU assets, net of previously recognized prepaid rent and accrued liabilities, and corresponding lease liabilities of $8.7 million. The Company's finance leases ~~are~~were immaterial as of ~~October~~July 31, ~~2019~~2020 and ~~February 1, 2019,~~January 31, 2020, respectively.

~~Effective February 1, 2018, the~~The Company adopted ASC 606, Revenue from Contracts with ~~Customers.~~Customers in fiscal year 2019. As a result, the Company recognizes ~~product~~ revenue ~~upon shipment~~when control of its goods and ~~transfer of control~~services is transferred to ~~distributors (known as “sell-in” revenue recognition) rather than shipment to the end customers (known as “sell-through” revenue recognition) based on~~ its ~~estimate of the consideration it expects to receive.~~customers. Revenue recognition is evaluated through the following five steps: (i) identification of the contract, or contracts, with a customer; (ii) identification of the performance obligations in the contract; (iii) determination of the transaction price; (iv) allocation of the transaction price to the performance obligations in the contract; and (v) recognition of revenue when or as a performance obligation is satisfied.

The sale of semiconductor products accounts for the substantial majority of the Company’s consolidated revenue. Sales agreements with customers are renewable periodically and contain terms and conditions with respect to payment, delivery, warranty, supply and other rights. The Company considers an accepted customer purchase order, governed by sales agreement, to be the contract with the customer. For each contract, the Company considers the promise to transfer tangible products to be the identified performance obligation. Product sales contracts may include volume-based tiered pricing or rebates that are fulfilled in cash or product. In determining the transaction price, the Company accounts for the right of returns, cash rebates, commissions and other pricing adjustments as variable consideration, ~~and~~ estimates these amounts based on the expected amount to be provided to customers and reduces the revenue recognized. The Company estimates sales returns and rebates based on the Company’s historical patterns of return and pricing credits. As the Company’s standard payment terms are 30 days to 60 days, the contracts have no financing component. Under ASC 606, the Company estimates the total consideration to be received by using the expected value method for each contract, computes weighted average selling price for each unit shipped in cases where there is a material right due to the presence of volume-based tiered pricing, allocates the total consideration between the identified performance obligations, and recognizes revenue when control of its goods and services is transferred to its customers. The Company considers product control to be transferred at a point in time upon shipment or delivery because the Company has a present right to payment at that time, the customer has legal title to the asset, the Company has transferred physical possession of the asset, and the customer has significant risk and rewards of ownership of the asset.

The Company also enters into fixed-price engineering service agreements with certain customers. These agreements may include multiple performance obligations, such as software development services, licensing of intellectual property and post-contract customer support, or PCS. These multiple performance obligations are highly interdependent, highly interrelated, are typically not sold separately and do not have standalone selling prices. They are all inputs to generate one combined output which is incorporating the Company’s SoC into the customer’s product. Accordingly, the Company determines that they are not separately identifiable and shall be treated as a single performance obligation. Customers usually pay based on milestones achieved. Because payments received do not correspond directly with the value of the Company’s performance to date, for fixed-price engineering services arrangements, revenue is recognized using the time-based straight line method, which best depicts the Company’s performance toward complete satisfaction of the performance obligation based on the nature of such professional services. Revenues from engineering service agreements were not material for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019~~2020 and ~~2018,~~2019, respectively.

Timing of revenue recognition may differ from the timing of invoicing to the Company’s customers. The Company records contract assets when revenue is recognized prior to invoicing. The Company’s contract assets are primarily related to satisfied but unbilled performance obligations associated with its engineering service agreements at the reporting date. As of July 31, 2020 and January 31, 2020, the contract assets for these unbilled receivables were not material. The Company’s contract liabilities ~~are~~consist of deferred revenue. The deferred revenue is primarily related to the portion of a transaction price that exceeds the weighted average selling price for products sold to date under tiered-pricing contracts which contain material rights. ~~These contract liabilities are~~This deferred revenue is expected to be recognized over the course of the contract when products are delivered for future pricing below the weighted average selling price of the contract. For the three and ~~nine~~six months ended ~~October~~July 31, ~~2019~~2020 and ~~2018,~~2019, the Company did not recognize any material revenue adjustment, respectively, related to performance obligations satisfied in prior periods released from ~~these contract liabilities.~~this deferred revenue. As of ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019,~~2020, the ~~contract liabilities~~respective deferred revenues were not material. Additionally, the transaction price allocated to unsatisfied, or partially unsatisfied, purchase orders for contracts that are greater than a year was not material as of ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019,~~2020, respectively.The Company also elects not to disclose the value of unsatisfied or partially unsatisfied performance obligations due to an original expected contract duration of one year or less and elects to exclude amounts collected from customers for all sales taxes from the transaction price.

Cost of revenue includes cost of materials, cost associated with packaging and assembly, testing and shipping, cost of personnel, stock-based compensation, logistics and quality assurance, warranty cost, royalty expense, write-downs of inventories and allocation of overhead.

Research and development costs are expensed as incurred and consist primarily of personnel costs, product development costs, which include engineering services, development software and hardware tools, license fees, costs of fabrication of masks for prototype products, other development materials costs, depreciation of equipment and tools and allocation of facility costs, net of any research and development grants. As of ~~October~~July 31, ~~2019,~~2020, there was approximately ~~$1.2~~$1.3 million of grants recorded in prepaid expenses and other current assets and approximately ~~$2.9~~$2.7 million of grants recorded in other non-current assets in the condensed consolidated balance sheets.

The Company records income taxes using the asset and liability method, which requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been recognized in its financial statements or tax returns. In estimating future tax consequences, generally all expected future events other than enactments or changes in the tax law or rates are considered. Valuation allowances are provided when necessary to reduce deferred tax assets to the amount expected to be realized.

The Company applies authoritative guidance for the accounting for uncertainty in income taxes. The guidance requires that tax effects of a position be recognized only if it is “more likely than not” to be sustained based solely on its technical merits as of the reporting date. Upon estimating its tax positions and tax benefits, the Company considers and evaluates numerous factors, which may require periodic adjustments and which may not reflect the final tax liabilities. The Company adjusts its financial statements to reflect only those tax positions that are more likely than not to be sustained under examination.

As part of the process of preparing condensed consolidated financial statements, the Company is required to estimate its taxes in each of the jurisdictions in which it operates. The Company estimates actual current tax exposure together with assessing temporary differences resulting from differing treatment of items, such as accruals and allowances not currently deductible for tax purposes. These differences result in deferred tax assets, which are included in the condensed consolidated balance sheets. In general, deferred tax assets represent future tax benefits to be received when certain expenses previously recognized in the condensed consolidated statements of operations become deductible expenses under applicable income tax laws, or loss or credit carryforwards are utilized.

In assessing whether deferred tax assets may be realized, the Company considers whether it is more likely than not that some portion or all of deferred tax assets will be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income.

The Company makes estimates and judgments about its future taxable income based on assumptions that are consistent with its plans and estimates. Should the actual amounts differ from estimates, the amount of valuation allowance could be materially impacted. Any adjustment to the deferred tax asset valuation allowance would be recorded in the condensed consolidated income statement for the periods in which the adjustment is determined to be required.

Basic earnings (losses) per share is computed by dividing net income (loss) available to ordinary shareholders by the weighted-average number of ordinary shares outstanding during the period. Diluted earnings (losses) per share is computed by dividing net income (loss) available to ordinary shareholders by the weighted-average number of ordinary shares outstanding during the period increased to include the number of additional ordinary shares that would have been outstanding if the potentially dilutive securities had been issued. Potentially dilutive securities include outstanding stock options, shares to be purchased under the Company’s employee stock purchase plan, unvested restricted stock and restricted stock units. The dilutive effect of potentially dilutive securities is reflected in diluted earnings (losses) per share by application of the treasury stock method.

Comprehensive income (loss) includes unrealized gains or losses from available-for-sale securities that are excluded from net income (loss).

In ~~June 2016,~~December 2019, the FASB issued ASU ~~2016-13, Financial Instruments – Credit Losses~~2019-12, Income Taxes (Topic ~~326),~~740): Simplifying the Accounting for Income Taxes. The amendments in this ASU simplify the accounting for income taxes by removing certain exceptions to ~~introduce a new impairment model~~the general principles in Topic 740. The amendments also improve consistent application of and simplify GAAP for ~~recognizing credit losses on financial instruments based on an estimate~~other areas of current expected credit losses (“ECL”). Under the new model, an entity is required to estimate ECL on available-for-sale (AFS) debt securities only when the fair value is below the amortized cost of the assetTopic 740 by clarifying and ~~is no longer based on an impairment being “other-than-temporary”.~~amending existing guidance. The ~~new model also requires the impairment calculation on an individual security level and requires an entity use present value of cash flows when estimating the ECL. The credit-related losses~~amendments are required to be recognized through earnings and non-credit related losses are reported in other comprehensive income. In April 2019, the FASB further clarified the scope of the credit losses standard and addressed issues related to accrued interest receivable balances, recoveries, variable interest rates and prepayment. The ASU will be effective for public entities in fiscal years beginning after December 15, 2019, including interim periods within those fiscal years. The new guidance will require modified retrospective application to all outstanding instruments, with a cumulative effect adjustment recorded to opening retained earnings as of the beginning of the first period in which the guidance becomes effective. The Company does not believe the adoption of this new guidance will have a material impact on its consolidated financial statements.

In January 2017, the FASB issued ASU 2017-04, Intangibles – Goodwill and Other (Topic 350): Simplifying the Test of Goodwill Impairment, to eliminate the requirement to calculate the implied fair value of goodwill to measure a goodwill impairment charge. Instead, entities will record an impairment charge based on the excess of a reporting unit’s carrying amount over its fair value. This new guidance will be applied prospectively and is effective for annual and interim periods beginning after December 15, 2019. ~~The Company does not believe the adoption of this new guidance will have a material impact on its~~ ~~financial position, results of operations and disclosures~~.

In August 2018, the FASB issued 2018-13, Fair Value Measurement (Topic 820): Disclosure Framework – Changes to the Disclosure Requirements for Fair Value Measurement. Under this new guidance, the entities will no longer be required to disclose the amount of and the reasons for transfers between Level 1 and Level 2 of the fair value hierarchy, but will be required to disclose the range and weighted average used to develop significant unobservable inputs for Level 3 fair value measurements. The guidance is effective for fiscal years beginning after December 15, 2019 and for the interim periods within those fiscal years. Early adoption is permitted. ~~The Company does not believe the adoption of this new guidance will have a material impact on its~~ ~~financial position, results of operations and disclosures.~~

In August 2018, the FASB issued 2018-15, Intangibles – Goodwill and Other – Internal-Use Software (Subtopic 350-40): Customer’s Accounting for Implementation Costs Incurred in a Cloud Computing Arrangement That Is a Service Contract. Under this new guidance, the entities are required to capitalize implementation costs related to a hosting arrangement that is a service contract and amortize the costs over the term of the hosting arrangement, beginning when the module or component of the hosting arrangement is ready for its intended use. The guidance is effective for fiscal years beginning after December 15, 2019 and for the interim periods within those fiscal years. Early adoption is permitted. ~~The Company does not believe the adoption of this new guidance will have a material impact on its~~ ~~financial position, results of operations and disclosures.~~

In April 2019, the FASB issued ASU 2019-04, Codification Improvements to Topic 326, Financial Instruments – Credit Losses, Topic 815, Derivatives and Hedging, and Topic 25, Financial Instruments. The new guidance further clarifies that equity instruments without readily determinable fair values for which an entity has elected the measurement alternative should be remeasured to fair value as of the date that an observable transaction occurred. The FASB also amended the guidance to clarify that the nonrecurring fair value disclosure is applicable to equity instruments accounted for under the measurement alternative. The ASU will be effective for public entities in fiscal years beginning after December 15, 2019, including interim periods within those fiscal years, with early adoption permitted and requires a prospective method for those related to equity securities without readily determinable fair values that are measured using the measurement alternative. The Company does not believe the adoption of this new amendment will have a material impact on its consolidated financial statements.

In November 2019, the FASB issued ASU 2019-08, Compensation – Stock Compensation (Topic 718) and Revenue from Contracts with Customers (Topic 606): Codification Improvements – Share-Based Consideration Payable to a Customer. Under this new guidance, share-based payment award issued to a customer should be recorded as a reduction of the transaction price in revenue with an amount measured under the grant-date fair value of the award. Changes in the measurement of the share-based payments after the grant date that are due to the form of the consideration are not included in the transaction price and are recorded elsewhere in the income statement. The award is measured and classified under ASC 718 for its entire life, unless the award is modified after it vests and the grantee is no longer a customer. The new guidance is effective for public entities that have adopted ASU 2018-07 in fiscal years beginning after December 15, 2019,2020, including interim periods within those fiscal years. Early adoption is permitted. The Company ~~does~~did not ~~believe~~early adopt and believes the adoption of this new guidance will not have ana material impact on its consolidated financial ~~statements.~~statements and disclosures.

In January 2020, the FASB issued ASU 2020-01 - Investments - Equity securities (Topic 321), Investments - Equity method and joint ventures (Topic 323), and Derivatives and hedging (Topic 815) - Clarifying the interactions between Topic 321, Topic 323, and Topic 815. The amendments in this Update improve the accounting for certain equity securities upon the application or discontinuation of the equity method of accounting and clarify the scope considerations for forward contracts and purchased options on certain securities. The amendments are effective for public entities in fiscal years beginning after December 15, 2020, including interim periods within those fiscal years. Early adoption is permitted. The Company did not early adopt and believes the adoption of this new guidance will not have a material impact on its consolidated financial statements and disclosures.

The Company invests a portion of its cash in debt securities that are denominated in United States dollars. The investment portfolio consists of money market funds, asset-backed securities, commercial paper, U.S. government securities, and debt securities of corporations. All of the investments are classified as available-for-sale securities and reported at fair value in the condensed consolidated balance sheets as follows:

	As of October 31, 2019									As of July 31, 2020
	Amortized Cost		Unrealized Gains		Unrealized Losses			Fair Value		Amortized Cost		Unrealized Gains		Unrealized Losses			Fair Value
	(in thousands)									(in thousands)
Money market funds	$	23,595	$	—	$	—		$	23,595	$	164	$	0	$	0		$	164
Commercial paper		66,320		—		—			66,320		61,621		0		0			61,621
Corporate bonds		85,890		617		(12	)		86,495		96,410		1,274		(44	)		97,640
Asset-backed securities		16,516		43		(6	)		16,553		19,904		240		0			20,144
U.S. government securities		16,823		43		—			16,866		34,330		117		0			34,447
Total cash equivalents and marketable debt securities	$	209,144	$	703	$	(18	)	$	209,829	$	212,429	$	1,631	$	(44	)	$	214,016

	As of January 31, 2019									As of January 31, 2020
	Amortized Cost		Unrealized Gains		Unrealized Losses			Fair Value		Amortized Cost		Unrealized Gains		Unrealized Losses			Fair Value
	(in thousands)									(in thousands)
Money market funds	$	8,914	$	—	$	—		$	8,914	$	8,284	$	0	$	0		$	8,284
Certificates of Deposit		7,012		—		—			7,012
Commercial paper		68,233		—		—			68,233		63,390		0		0			63,390
Corporate bonds		87,250		170		(60	)		87,360		95,053		653		0			95,706
Asset-backed securities		11,607		3		(6	)		11,604		23,062		69		(2	)		23,129
U.S. government securities		21,993		3		(13	)		21,983		20,524		48		0			20,572
Total cash equivalents and marketable debt securities	$	205,009	$	176	$	(79	)	$	205,106	$	210,313	$	770	$	(2	)	$	211,081

As of July 31, 2020, there were 0 debt securities with unrealized losses for more than twelve months.

	As of				As of
	October 31, 2019		January 31, 2019		July 31, 2020		January 31, 2020
	(in thousands)				(in thousands)
Included in cash equivalents	$	61,348	$	40,245	$	23,960	$	37,736
Included in marketable debt securities		148,481		164,861		190,056		173,345
Total cash equivalents and marketable debt securities	$	209,829	$	205,106	$	214,016	$	211,081

The contractual maturities of the investments at ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019~~2020 were as follows:

	As of				As of
	October 31, 2019		January 31, 2019		July 31, 2020		January 31, 2020
	(in thousands)				(in thousands)
Due within one year	$	153,433	$	151,991	$	139,040	$	146,267
Due within one to three years		56,396		53,115		74,976		64,814
Total cash equivalents and marketable debt securities	$	209,829	$	205,106	$	214,016	$	211,081

The unrealized losses on the available-for-sale securities were primarily caused by fluctuations in market value and interest rates as a result of the economic environment. ~~As the decline in market value was attributable to changes in market conditions and not credit quality, and because~~Upon adoption of ASU No. 2016-13, Financial Instruments-Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments, the Company ~~neither intended~~estimates the expected losses at an individual security level whenever a security’s fair value is below its amortized cost basis using the discounted cash flow method. The credit-related portion of the loss is recognized in other income, net in the condensed consolidated statements of operations but is limited to ~~sell nor was it more likely than~~the difference between the fair value and the amortized cost basis of the security, adjusted for accrued interest. The non-credit-related portion of the loss is recognized in accumulated other comprehensive income in the condensed consolidated balance sheets. The credit-related losses of the Company’s financial instruments were not ~~that it will be required to sell these investments prior to a recovery of par value,~~material for the ~~Company did not consider these investments to be other-than temporarily impaired as of October~~three and six months ended July 31, ~~2019 and January 31, 2019,~~2020, respectively.

The following fair value hierarchy is applied for disclosure of the inputs used to measure fair value. This hierarchy prioritizes the inputs into three broad levels as follows:

Level 1—Inputs are unadjusted quoted prices in active markets for identical assets or liabilities.

Level 2—Inputs are quoted prices for similar assets and liabilities in active markets or inputs that are observable for the assets or liabilities, either directly or indirectly through market corroboration, for substantially the full term of the financial instruments.

Level 3—Unobservable inputs based on the Company’s own assumptions used to measure assets and liabilities at fair value. The inputs require significant management judgment or estimation.

The Company measures the fair value of money market funds ~~and certificates of deposit~~ using quoted prices in active markets for identical assets and classifies them within Level 1. The ~~respective~~ fair ~~values~~value of the Company’s investments in other debt securities are obtained based on quoted prices for similar assets in active markets and are classified within Level 2.

The following ~~table presents~~tables present the fair value of the financial instruments measured on a recurring basis as of ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019:~~2020, respectively:

	As of October 31, 2019								As of July 31, 2020
	Total		Level 1		Level 2		Level 3		Total		Level 1		Level 2		Level 3
	(in thousands)								(in thousands)
Money market funds	$	23,595	$	23,595	$	—	$	—	$	164	$	164	$	0	$	0
Commercial paper		66,320		—		66,320		—		61,621		0		61,621		0
Corporate bonds		86,495		—		86,495		—		97,640		0		97,640		0
Asset-backed securities		16,553		—		16,553		—		20,144		0		20,144		0
U.S. government securities		16,866		—		16,866		—		34,447		0		34,447		0
Total cash equivalents and marketable debt securities	$	209,829	$	23,595	$	186,234	$	—	$	214,016	$	164	$	213,852	$	0

	As of January 31, 2019								As of January 31, 2020
	Total		Level 1		Level 2		Level 3		Total		Level 1		Level 2		Level 3
	(in thousands)								(in thousands)
Money market funds	$	8,914	$	8,914	$	—	$	—	$	8,284	$	8,284	$	0	$	0
Certificates of Deposit		7,012		7,012	��	—		—
Commercial paper		68,233		—		68,233		—		63,390		0		63,390		0
Corporate bonds		87,360		—		87,360		—		95,706		0		95,706		0
Asset-backed securities		11,604		—		11,604		—		23,129		0		23,129		0
U.S. government securities		21,983		—		21,983		—		20,572		0		20,572		0
Total cash equivalents and marketable debt securities	$	205,106	$	15,926	$	189,180	$	—	$	211,081	$	8,284	$	202,797	$	0

Inventories at ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019~~2020 consisted of the following:

	As of				As of
	October 31, 2019		January 31, 2019		July 31, 2020		January 31, 2020
	(in thousands)				(in thousands)
Work-in-progress	$	11,830	$	9,430	$	15,085	$	10,133
Finished goods		8,015		8,822		8,822		12,838
Total	$	19,845	$	18,252	$	23,907	$	22,971

Depreciation expense was approximately ~~$0.7~~$0.6 million and ~~$0.6~~$0.7 million for the three months ended ~~October~~July 31, ~~2019~~2020 and ~~2018,~~2019, respectively. Depreciation expense was approximately ~~$2.1~~$1.3 million and ~~$1.9~~$1.4 million for the ~~nine~~six months ended ~~October~~July 31, ~~2019~~2020 and ~~2018,~~2019, respectively. Property and equipment at ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019~~2020 consisted of the following:

	As of						As of
	October 31, 2019			January 31, 2019			July 31, 2020			January 31, 2020
	(in thousands)						(in thousands)
Computer equipment and software	$	10,095		$	9,098		$	10,854		$	10,282
Machinery and equipment		6,162			5,659			6,412			6,317
Furniture and fixtures		969			969			969			969
Leasehold improvements		2,345			2,331			2,218			2,356
Construction in progress		49			330			46			63
		19,620			18,387			20,499			19,987
Less: accumulated depreciation and amortization		(13,693	)		(11,659	)		(15,472	)		(14,373	)
Total property and equipment, net	$	5,927		$	6,728		$	5,027		$	5,614

~~Intangible~~The intangible assets primarily consist of $4.1 million of in-process research and development (“IPR&D”) from the acquisition of VisLab S.r.l., or VisLab, in June 2015 and ~~$4.1~~$12.0 million of noncancelable software licenses, net of amortization expense. Acquired IPR&D is capitalized at fair value and the amortization commences upon completion of the underlying projects. ~~When a project underlying reported IPR&D is~~Once research and development efforts are completed, the corresponding amount of IPR&D is reclassified as an amortizable purchased intangible asset and is amortized over its estimated useful life. As of ~~October~~July 31, ~~2019 and January 31, 2019,~~2020, there was 0 IPR&D ~~amortized, respectively.~~amortized. The Company will determine the project incorporating the VisLab IPR&D to be completed when a related chip begins mass production to address the level 3 and above advanced driving assistance systems markets.

The Company enters into certain internal-use noncancelable software license agreements with third parties from time-to-time. The licenses have been capitalized as intangible assets, and the corresponding future payments have been recorded as liabilities at net present value. As of ~~October~~July 31, ~~2019 and January 31, 2019, $2.8 million and $4.9~~2020, $5.0 million was recorded in accrued and other current liabilities ~~respectively,~~ and ~~$0.7 million and $0.3~~$6.5 million was recorded in other long-term liabilities ~~respectively,~~ in the condensed consolidated balance sheets.

The carrying amounts of intangible assets as of ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019~~2020 were as follows:

	As of October 31, 2019							As of January 31, 2019							As of July 31, 2020							As of January 31, 2020
	Gross Carrying Amount		Accumulated Amortization			Net Carrying Amount		Gross Carrying Amount		Accumulated Amortization			Net Carrying Amount		Gross Carrying Amount		Accumulated Amortization			Net Carrying Amount		Gross Carrying Amount		Accumulated Amortization			Net Carrying Amount
	(in thousands)														(in thousands)
In-process research and development	$	4,100	$	—		$	4,100	$	4,100	$	—		$	4,100	$	4,100	$	0		$	4,100	$	4,100	$	0		$	4,100
Internal-use software licenses		15,654		(11,522	)		4,132		14,448		(7,612	)		6,836		18,376		(6,388	)		11,988		27,203		(13,477	)		13,726
Total acquired intangible assets	$	19,754	$	(11,522	)	$	8,232	$	18,548	$	(7,612	)	$	10,936	$	22,476	$	(6,388	)	$	16,088	$	31,303	$	(13,477	)	$	17,826

During the six months ended July 31, 2020, there was approximately $10.1 million of fully amortized software licenses retired. The amortization expense related to ~~these~~ software licenses was approximately ~~$1.3~~$1.6 million and ~~$1.2~~$1.3 million for the three months ended ~~October~~July 31, ~~2019~~2020 and ~~2018,~~2019, respectively. The amortization expense related to ~~these~~ software licenses was approximately ~~$3.9~~$3.1 million and ~~$3.5~~$2.6 million for the ~~nine~~six months ended ~~October~~July 31, ~~2019~~2020 and ~~2018,~~2019, respectively. The estimated future amortization expense of these software licenses as of ~~October~~July 31, ~~2019~~2020 is as follows:

	As of		As of
	October 31, 2019		July 31, 2020
Fiscal Year	(in thousands)		(in thousands)
2020 (3 months remaining)	$	1,359
2021		2,099
2021 (6 months remaining)			$	3,101
2022		552		5,052
2023		122		3,736
2024		—		99
2025				0
Thereafter		—		0
Total future amortization expenses:	$	4,132	$	11,988

IPR&D is required to be tested for impairment at least annually in the fourth fiscal quarter or sooner whenever events or changes in circumstances indicate that the assets may be impaired. There were 0 intangible asset impairments for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019~~2020 and ~~2018,~~2019, respectively.

Accrued and other current liabilities at ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019~~2020 consisted of the following:

	As of				As of
	October 31, 2019		January 31, 2019		July 31, 2020		January 31, 2020
	(in thousands)				(in thousands)
Accrued employee compensation	$	14,982	$	10,645	$	13,228	$	16,874
Accrued rebates		247		311		133		54
Accrued product development costs		8,017		6,393		12,232		10,885
Software license liabilities, current		2,839		4,879		5,041		4,388
Other accrued liabilities		2,362		2,472		2,522		2,769
Total accrued and other current liabilities	$	28,447	$	24,700	$	33,156	$	34,970

The Company has entered into various operating leases for its worldwide office ~~buildings~~facilities. The operating lease expense was approximately $0.7 million and ~~research and development facilities. During~~$0.7 million for the three months ended ~~October~~July 31, 2020 and 2019, the Company exercised the renewal option to extend its U.S. office lease for a period of 63 months beginning from June 1, 2020 through August 31, 2025 and renewed its Shanghai office lease for another two years beginning from December 1, 2019 to November 30, 2021.respectively. The ~~Company accounted these 2 renewed contracts as lease modifications and recorded an increase to the~~ operating lease ~~right-of-use assets~~expense was approximately $1.4 million and ~~corresponding operating lease liabilities by approximately $4.0~~$1.5 million ~~respectively, in the condensed consolidated balance sheets.~~

The Company also signed a separate lease for additional space for its U.S. office for a period of 56 months beginning from January 1, 2021 through August 31, 2025 and will record it in the balance sheet upon commencement date on January 1, 2021. T~~he total estimated future undiscounted cash payments for this lease are approximately $1.7 million~~.

~~In August 2019,~~ ~~VisLab, a wholly-owned subsidiary, was granted a land lease for 35 years with an obligation to construct a building on the land~~ ~~in line with architectural requirements from the lessor~~ ~~in Parma, Italy (“Parma lease”). The Company will be responsible~~ for the ~~costs of construction and occupy the building after completion of construction for the remainder of the lease term.~~ At the end of the lease, the land together with the building and all of the improvements will revert to the lessor. The Parma lease will be recorded in the balance sheet upon completion of the building construction, ~~which is expected to be two years after~~ ~~the lease inception date. Any payments made prior to completion of construction will be recorded as prepayments of the lease in other non-current assets in the condensed consolidated balance sheets.~~ The total estimated future undiscounted cash payments are approximately $2.2 million, of which $1.8 million will be paid in the first two years and the remaining balance of $0.4 million will be paid over the remainder of the lease term.

~~For the three and nine~~six months ended ~~October~~July 31, ~~2019, the Company recorded approximately $0.7 million~~2020 and ~~$2.2 million of operating lease expense,~~2019, respectively. The Company's short-term leases and finance leases ~~are immaterial~~were not material as of ~~October~~July 31, ~~2019~~2020 and January 31, 2020, respectively.

~~The cumulative effect of the changes made to the condensed consolidated balance sheet as of February 1, 2019 for the adoption of ASC 842 was as follows:~~

	Three Months Ended		Nine Months Ended		Three Months Ended		Six Months Ended
	October 31, 2019		October 31, 2019		July 31, 2020		July 31, 2020
	(in thousands)				(in thousands)
Cash paid for operating leases included in operating cash flows	$	784	$	2,238	$	342	$	1,031
Supplemental non-cash information related to lease liabilities arising from obtaining right-of-use assets	$	82	$	210	$	88	$	176
Leased assets obtained in exchange for operating lease liabilities arising from lease modifications	$	4,021	$	4,021

As of ~~October~~July 31, ~~2019,~~2020, the weighted average remaining lease term is ~~5.17~~4.76 years, and the weighted average discount rate is 4.43 percent. Future minimum lease payments for the lease liabilities ~~excluding the additional space for the U.S. office and the Parma lease described above,~~ are as follows:

	As of			As of
	October 31, 2019			July 31, 2020
Fiscal Year	(in thousands)			(in thousands)
2020 (3 months remaining)	$	633
2021		2,487
2021 (6 months remaining)				$	1,390
2022		2,353			2,419
2023		1,644			1,681
2024		1,693			1,699
2025					1,746
Thereafter		2,947			1,227
Total future annual minimum lease payments		11,757			10,162
Less: interest		(1,077	)		(849	)
Total lease liabilities	$	10,680		$	9,313

~~Prior to the adoption of the new leases guidance, future minimum undiscounted lease payments as of January 31, 2019 were as follows:~~

The increased liabilities, as compared to the minimum lease payments as of January 31, 2019, were primarily attributable to a renewal option exercised and lease modifications during the nine months ended October 31, 2019.

Other long-term liabilities at ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019~~2020 consisted of the following:

	As of				As of
	October 31, 2019		January 31, 2019		July 31, 2020		January 31, 2020
	(in thousands)				(in thousands)
Unrecognized tax benefits, including interest	$	7,872	$	6,732	$	8,445	$	8,261
Deferred tax liabilities, non-current		1,293		1,293		1,287		1,288
Software license liabilities, non-current		660		310		6,533		8,159
Other long-term liabilities		100		6		413		68
Total other long-term liabilities	$	9,925	$	8,341	$	16,678	$	17,776

After completion of the Company’s initial public offering in 2012, a total of 20,000,000 preference shares, with a $0.00045 par value per share, were authorized. There were 0 preference shares issued and outstanding as of ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019,~~2020, respectively.

As of ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019,~~2020, a total of 200,000,000 ordinary shares were authorized.

On February 1, ~~2019,~~2020, the Company added ~~1,453,659~~1,521,252 ordinary shares to the ordinary shares reserved for issuance, pursuant to an “evergreen” provision contained in the 2012 Equity Incentive Plan, or EIP. Pursuant to such provision, for each fiscal year, the number of ordinary shares reserved for issuance under the EIP is automatically increased by a number equal to the lesser of (i) 3,500,000 ordinary shares, (ii) four and one half percent (4.5%) of the aggregate number of ordinary shares outstanding on January 31st of the preceding fiscal year, or (iii) a lesser number of shares that may be determined by the Company’s Board of Directors.

On February 1, ~~2019,~~2020, the Company added ~~403,794~~422,570 ordinary shares to the ordinary shares reserved for issuance, pursuant to an “evergreen” provision contained in the Amended and Restated 2012 Employee Stock Purchase Plan, or ESPP. Pursuant to such provision, for each fiscal year, the number of ordinary shares reserved for issuance under the ESPP is automatically increased by a number equal to the lesser of (i) 1,500,000 ordinary shares, (ii) one and one quarter percent (1.25%) of the aggregate number of ordinary shares outstanding on such date, or (iii) an amount determined by the Company’s Board of Directors or a duly authorized committee of the Board of Directors.

As of ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019,~~2020, the following ordinary shares were reserved for future issuance under the EIP and ESPP:

	As of				As of
	October 31, 2019		January 31, 2019		July 31, 2020		January 31, 2020
Shares reserved for options, restricted stock and restricted stock units under EIP		6,310,393		5,915,654		6,818,978		6,045,108
Shares reserved for ESPP		2,059,504		1,833,574		2,398,510		2,059,504

~~On June 4, 2018, the Company’s Board of Directors authorized the repurchase of up to $100.0 million of the Company’s ordinary shares over a~~ ~~twelve-month~~ ~~period through June 4, 2019.~~

On May 29, 2019, the Company’s Board of Directors authorized ~~an additional~~a program to repurchase of up to $50.0 million of the Company’s ordinary shares ~~commencing immediately~~ through June 30, 2020. On March 16, 2020, the Company repurchased a total of 25,719 shares for approximately $1.0 million in cash. On May 29, 2020, the Board approved an extension of this program for an additional twelve months ending June 30, 2021. Since the inception of the Company’s repurchase programs in June 2016, a total of $275.0 million has been authorized, and a total of 4,011,595 shares have been repurchased for approximately $175.8 million in cash. Repurchases may be made from time-to-time through open market purchases, 10b5-1 plans or privately negotiated transactions subject to market conditions, applicable legal requirements and other relevant factors. The repurchase program does not obligate the Company to acquire any particular amount of ordinary shares, and it may be suspended at any time at the Company’s discretion. The repurchase program is funded using the Company’s working capital and any repurchased shares are recorded as authorized but unissued shares. ~~There were 0 shares repurchased during the three and nine months ended October 31, 2019, respectively.~~ As of ~~October~~July 31, ~~2019,~~2020, there was ~~$50.0~~approximately $49.0 million available for repurchases under the repurchase program through June 30, ~~2020.~~2021.

The following table presents the classification of stock-based compensation for the periods indicated:

	Three Months Ended October 31,				Nine Months Ended October 31,				Three Months Ended July 31,				Six Months Ended July 31,
	2019		2018		2019		2018		2020		2019		2020		2019
	(in thousands)								(in thousands)
Stock-based compensation:
Cost of revenue	$	335	$	310	$	922	$	942	$	316	$	320	$	613	$	587
Research and development		10,601		9,720		31,306		27,847		10,010		10,501		19,906		20,705
Selling, general and administrative		6,372		5,582		17,740		16,148		6,068		5,379		11,911		11,368
Total stock-based compensation	$	17,308	$	15,612	$	49,968	$	44,937	$	16,394	$	16,200	$	32,430	$	32,660

During the three and ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, approximately ~~$2.0~~$0.1 million and ~~$4.2~~$0.9 million of stock-based compensation expense was accrued in the accrued and other current liabilities in the condensed consolidated balance sheets, respectively. As of ~~October~~July 31, ~~2019,~~2020, total unrecognized compensation cost related to unvested stock options was ~~$4.1~~$3.4 million and is expected to be recognized over a weighted-average period of ~~2.61~~2.40 years. Total unrecognized compensation cost related to unvested restricted stock units was ~~$128.2~~$106.7 million and is expected to be recognized over a weighted-average period of ~~2.68~~2.24 years. ~~All restricted stock awards were fully vested as of October 31, 2019.~~

The following table sets forth the weighted-average assumptions used to estimate the fair value of stock options and employee stock purchase plan awards for the periods indicated:

	Three Months Ended October 31,						Nine Months Ended October 31,						Three Months Ended July 31,						Six Months Ended July 31,
	2019			2018			2019			2018			2020			2019			2020			2019
Stock Options:
Volatility		52	%		53	%		52	%		54	%		53	%		52	%		52	%		52	%
Risk-free interest rate		1.39	%		2.78	%		1.84	%		2.75	%		0.52	%		1.95	%		0.59	%		2.31	%
Expected term (years)	6.09			5.45			6.02				5.40		5.84			6.09			5.86			5.95
Dividend yield		0	%		0	%		0	%		0	%		0	%		0	%		0	%		0	%
Employee stock purchase plan awards:
Volatility		46	%		44	%		47	%		45	%		—			—			61	%		48	%
Risk-free interest rate		1.93	%		2.35	%		2.23	%		2.15	%		—			—			0.29	%		2.52	%
Expected term (years)	0.5			0.5			0.5			0.5				—			—		0.5			0.5
Dividend yield		0	%		0	%		0	%		0	%		—			—			0	%		0	%

The following table summarizes stock option activities for the period indicated:

	Option Outstanding													Option Outstanding
										Weighted-													Weighted-
								Total Intrinsic		Average											Total Intrinsic		Average
						Weighted-		Value Of		Remaining		Aggregate							Weighted-		Value Of		Remaining		Aggregate
				Weighted-		Average		Options		Contractual		Intrinsic					Weighted-		Average		Options		Contractual		Intrinsic
				Average		Grant-date		Exercised		Term		Value					Average		Grant-date		Exercised		Term		Value
	Shares			Exercise Price		Fair Value		(in thousands)		(in years)		(in thousands)		Shares			Exercise Price		Fair Value		(in thousands)		(in years)		(in thousands)
Outstanding at January 31, 2019		1,459,064		$	28.31
Outstanding at January 31, 2020															1,124,646		$	32.93
Granted		57,350			49.79	$	25.06								23,600			53.54	$	25.73
Exercised		(338,289	)		15.43			$	12,054						(99,911	)		14.57			$	4,293
Forfeited		(13,306	)		45.65										(7,115	)		48.88
Expired		(9,751	)		55.95										(13,853	)		82.55
Outstanding at October 31, 2019		1,155,068			32.71					4.54		$	26,387
Exercisable at October 31, 2019		981,191		$	29.94						3.80	$	25,280
Outstanding at July 31, 2020															1,027,367			34.41					4.17		$	15,936
Exercisable at July 31, 2020															885,276		$	31.99						3.48	$	15,670

The intrinsic value of options outstanding and exercisable is calculated based on the difference between the fair market value of the Company’s ordinary shares on the reporting date and the exercise price. The closing price of the Company’s ordinary shares on ~~October~~July 31, ~~2019~~2020 was ~~$52.63,~~$45.28, as reported by The NASDAQ Global Market. The intrinsic value of exercised options is calculated bybased on the difference between the fair market value of the Company’s ordinary shares on the exercise date and the exercise price.

The following table summarizes ~~restricted stock and~~the restricted stock units activities for the period indicated:

				Weighted-					Weighted-
				Average					Average
				Grant-Date					Grant-Date
	Shares			Fair Value		Shares			Fair Value
Unvested at January 31, 2019		2,395,516		$	48.49
Unvested at January 31, 2020							2,617,266		$	50.30
Granted		1,296,053			54.48		536,894			53.35
Vested		(775,893	)		51.41		(647,471	)		51.33
Forfeited		(80,496	)		55.50		(59,726	)		56.14
Unvested at October 31, 2019		2,835,180		$	50.23
Unvested at July 31, 2020							2,446,963		$	50.56

As of ~~October~~July 31, ~~2019,~~2020, the aggregate intrinsic value of unvested restricted stock units was ~~$149.2~~$110.8 million.

The following table sets forth the computation of basic and diluted loss per ordinary share for the periods indicated:

	Three Months Ended October 31,						Nine Months Ended October 31,						Three Months Ended July 31,						Six Months Ended July 31,
	2019			2018			2019			2018			2020			2019			2020			2019
	(in thousands, except share and per share data)												(in thousands, except share and per share data)
Numerator:
Net loss	$	(4,309	)	$	(9,021	)	$	(31,811	)	$	(25,904	)	$	(14,756	)	$	(10,191	)	$	(30,219	)	$	(27,502	)
Denominator:
Weighted-average ordinary shares - basic		33,304,171			32,171,890			32,885,729			32,908,614			34,480,307			32,860,974			34,280,318			32,676,509
Weighted-average ordinary shares - diluted		33,304,171			32,171,890			32,885,729			32,908,614			34,480,307			32,860,974			34,280,318			32,676,509
Net loss per ordinary share:
Basic	$	(0.13	)	$	(0.28	)	$	(0.97	)	$	(0.79	)	$	(0.43	)	$	(0.31	)	$	(0.88	)	$	(0.84	)
Diluted	$	(0.13	)	$	(0.28	)	$	(0.97	)	$	(0.79	)	$	(0.43	)	$	(0.31	)	$	(0.88	)	$	(0.84	)

The following weighted-average potentially dilutive securities were excluded from the computation of diluted loss per ordinary share as their effect would have been antidilutive:

	Three Months Ended October 31,				Nine Months Ended October 31,				Three Months Ended July 31,				Six Months Ended July 31,
	2019		2018		2019		2018		2020		2019		2020		2019
Options to purchase ordinary shares		873,515		1,247,117		948,283		1,172,152		730,635		968,274		751,202		985,667
Restricted stock and restricted stock units		1,675,570		2,243,272		1,195,320		1,494,860		1,274,907		984,234		1,358,184		955,195
Employee stock purchase plan		13,672		58,530		11,204		35,204		25,245		2,472		28,169		9,971
		2,562,757		3,548,919		2,154,807		2,702,216		2,030,787		1,954,980		2,137,555		1,950,833

	Three Months Ended October 31,						Nine Months Ended October 31,						Three Months Ended July 31,						Six Months Ended July 31,
	2019			2018			2019			2018			2020			2019			2020			2019
	(in thousands)												(in thousands)
Loss before income taxes	$	(5,251	)	$	(8,429	)	$	(29,509	)	$	(23,537	)	$	(14,009	)	$	(8,213	)	$	(28,346	)	$	(24,258	)
Provision (benefit) for income taxes		(942	)		592			2,302			2,367
Provision for income taxes														747			1,978			1,873			3,244
Effective tax rate	17.9%			(7.0)%			(7.8%)			(10.1%)			(5.3)%			(24.1)%			(6.6)%			(13.4)%

The income tax expense decreased for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019, respectively,~~2020, as compared to the same periods in the prior fiscal year, primarily due to ~~an increase in tax benefits from excess stock-based compensation deductions, partially offset by~~ a decrease in the proportion of profits generated in ~~lower~~higher tax ~~jurisdictions.~~jurisdictions as well as an increase in the U.S. federal research tax credit, partially offset by an increase in non-deductible stock-based compensation.

On March 27, 2020, the Coronavirus Aid, Relief, and Economic Security Act (“CARES Act”), P.L. 116-136, was passed into law, amending portions of certain relevant US tax laws. The CARES Act includes a number of federal income tax law changes, including, but not limited to: 1) permitting net operating loss carrybacks to offset 100% of taxable income for taxable years beginning before 2021, 2) accelerating alternative minimum tax credit refunds, 3) temporarily increasing the allowable business interest deduction from 30% to 50% of adjusted taxable income, and 4) providing a technical correction for depreciation related to qualified improvement property. The CARES Act also provides for an Employee Retention Credit, a fully refundable payroll tax credit for certain eligible employers, and the ability for all eligible employers to defer payment of the employer share of payroll taxes owed on wages paid for the period ending December 31, 2020. The Company has preliminarily evaluated the impact of the CARES Act and does not expect it will have a material impact on the Company’s condensed consolidated financial statements.

The Company files federal and state income tax returns in the United States and in various foreign jurisdictions. The Internal Revenue Service is currently examining the Company’s U.S. federal income tax return for the fiscal year ended January 31, 2017. The tax years 2013 to ~~2018~~2019 remain open to examination by U.S. federal tax authorities. The tax years 2009 to ~~2018~~2019 remain open to examination by U.S. state tax authorities. The tax years ~~2013~~2014 to ~~2018~~2019 remain open to examination by foreign tax authorities. Fiscal years outside of the normal statute of limitations remain open to audit by tax authorities due to tax attributes generated in those earlier years, which have been carried forward and may be audited in subsequent years when utilized.

The Company regularly assesses the likelihood of adverse outcomes resulting from potential tax examinations to determine the adequacy of its provision for income taxes. These assessments can require considerable estimates and judgments. As of ~~October~~July 31, ~~2019,~~2020, the gross amount of unrecognized tax benefits was approximately ~~$40.5~~$43.1 million. If the estimates of income tax liabilities prove to be less than the ultimate assessment, then a further charge to expense could be required. If events occur, and the payment of these amounts ultimately proves to be unnecessary, the reversal of the liabilities could result in tax benefits being recognized in the period in which the Company determines the liabilities are no longer necessary. The Company does not anticipate significant changes to its uncertain tax positions during the next twelve months.

On July 27, 2015, the United States Tax Court issued a decision (“Tax Court Decision”) in Altera Corp. v. Commissioner, which concluded that related parties in a cost sharing arrangement are not required to share expenses related to share-based compensation. The Tax Court Decision was appealed by the Commissioner to the Ninth Circuit Court of Appeals (“Ninth Circuit”). On June 7, 2019, ~~a three-judge panel from~~ the Ninth Circuit issued an opinion (“~~Altera~~ ~~Ninth Circuit Panel Opinion”)~~ that reversed the Tax Court Decision. On July 22, 2019, the taxpayer requested a rehearing before the full Ninth Circuit ~~but~~and the request was denied on November 12, 2019. On February 10, 2020, the taxpayer filed a petition to appeal the decision with the Supreme Court of the United States which was denied on June 22, 2020. The ~~taxpayer may subsequently appeal from~~denial of the ~~Ninth Circuit~~request by the Supreme Court did not have a material impact to the ~~Supreme Court. The Company will continue to monitor the future developments and potential impacts on its~~Company’s condensed consolidated financial statements.

The Company’s components and products are procured and built by independent contract manufacturers based on sales forecasts. These forecasts include estimates of future demand, historical trends, analysis of sales and marketing activities, and adjustment of overall market conditions. The Company regularly issues purchase orders to independent contract manufacturers which are cancelable upon agreement between the Company and the third-party manufacturers. As of ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019,~~2020, total manufacturing purchase commitments were approximately ~~$27.6~~$24.4 million and ~~$28.2~~$35.9 million, respectively.

The Company, from time to time, in the normal course of business, indemnifies certain vendors with whom it enters into contractual relationships. The Company has agreed to hold the other party harmless against third-party claims in connection with the Company’s future products. The Company also indemnifies certain customers against third-party claims related to certain intellectual property and product liability matters. It is not possible to determine the maximum potential amount of liability under these indemnification obligations due to the limited history of prior indemnification claims and the unique facts and circumstances that are likely to be involved in each particular claim. The Company has 0t made payments under these obligations, and 0 liabilities have been recorded for these obligations in the condensed consolidated balance sheets as of ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019,~~2020, respectively.

The Company operates in 1 reportable segment related to the development and sales of low-power, high-definition (HD), Ultra HD video compression, image processing and computer vision solutions. The Chief Executive Officer of the Company has been identified as the Chief Operating Decision Maker (the “CODM”) and manages the Company’s operations as a whole. For the purpose of evaluating financial performance and allocating resources, the CODM reviews financial information presented on a consolidated basis accompanied by information by customer and geographic region.

The following table sets forth the Company’s revenue by geographic region based on bill-to location for the periods indicated:

	Three Months Ended October 31,				Nine Months Ended October 31,				Three Months Ended July 31,				Six Months Ended July 31,
	2019		2018		2019		2018		2020		2019		2020		2019
	(in thousands)								(in thousands)
Taiwan	$	42,986	$	28,300	$	101,567	$	100,650	$	27,313	$	30,981	$	61,773	$	58,581
Asia Pacific		18,011		20,971		49,745		55,372		14,965		17,246		28,993		31,734
Europe		2,264		5,734		9,848		13,191		2,633		4,101		4,886		7,584
North America other than United States		2,804		1,531		6,688		5,040		3,343		3,001		6,016		3,884
United States		1,857		750		3,672		2,445		1,859		1,081		3,090		1,815
Total revenue	$	67,922	$	57,286	$	171,520	$	176,698	$	50,113	$	56,410	$	104,758	$	103,598

As of ~~October~~July 31, ~~2019,~~2020, substantially all of the Company’s property and equipment, net, was located in the United States, Asia Pacific region and Europe with approximate net amounts of ~~$1.8~~$1.6 million, ~~$2.8~~$2.5 million and ~~$1.3~~$0.9 million, respectively.

The customers representing 10% or more of revenue and accounts receivable were Wintech and Chicony, which accounted for approximately ~~63.2%~~55.6% and ~~15.7%~~19.6% of total revenue for the three months ended ~~October~~July 31, ~~2019,~~2020, respectively, and accounted for approximately ~~59.2%~~59.5% and ~~17.8%~~17.4% of total revenue for the ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, respectively. The customers representing 10% or more of revenue and accounts receivable were Wintech and Chicony, which accounted for approximately ~~49.4%~~54.9% and ~~22.7%~~20.5% of total revenue for the three months ended ~~October~~July 31, ~~2018,~~2019, respectively, and accounted for approximately ~~57.0%~~56.5% and ~~16.3%~~19.1% of total revenue for the ~~nine~~six months ended ~~October 31, 2018, respectively. Accounts receivable with Wintech and Chicony were approximately $5.9 million and $10.7 million as of October~~July 31, 2019, respectively. Accounts receivable with Wintech and Chicony were approximately ~~$14.3~~$8.1 million and ~~$6.9~~$10.1 million as of ~~January~~July 31, ~~2019,~~2020, respectively.

ITEM 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with the unaudited condensed consolidated financial statements and related notes included elsewhere in this Quarterly Report on Form 10-Q, and the consolidated financial statements and notes thereto for the fiscal year ended January 31, ~~2019~~2020 and management’s discussion and analysis of our financial condition and results of operations included in our Annual Report on Form 10-K for the ~~2019~~2020 fiscal year filed with the Securities and Exchange Commission, or SEC, on March ~~29, 2019.~~27, 2020.

This Quarterly Report on Form 10-Q, including this “Management’s Discussion and Analysis of Financial Condition and Results of Operations”, includes a number of forward-looking statements that involve many risks and uncertainties. Forward-looking statements are identified by the use of the words “would,” “could,” “will,” “may,” “expect,” “believe,” “should,” “anticipate,” “outlook,” “if,” “future,” “intend,” “plan,” “estimate,” “predict,” “potential,” “target,” “seek,” “project,” “forecast,” “continue” or “foreseeable” and similar words and phrases, including the negatives of these terms, or other variations of these terms, that denote future events. Such statements include, but are not limited to, statements concerning our market opportunity and our ability to compete in such markets, our product strategy, our ability to develop and introduce new solutions, our future financial and operating performance, our sales and marketing strategy, our investment strategy, research and development, our customer and supplier relationships and inventory levels, industry trends, our cash needs and capital requirements, our repurchase programs, our expectations about taxes and operating expenses, the availability of third-party components and economic and political conditions. These statements reflect our current views with respect to future events and our potential financial performance, and are subject to risks and uncertainties that could cause our actual results and financial position to differ materially and adversely from what is projected or implied in any forward-looking statements included in this Quarterly Report on Form 10-Q. These factors include, but are not limited to: risks associated with revenue being generated from new customers or design wins, neither of which is assured; our ability to retain and expand customer relationships and to achieve design wins; the ongoing and potential impact of the COVID-19 pandemic on our operations or the operations of our supply chain or our customers; risks associated with the overall economy, including escalating trade tensions between the U.S. and China; the commercial success of our customers’ products; our growth strategy; fluctuations in our operating results; our ability to anticipate future market demands and future needs and preferences of our customers; our ability to introduce new and enhanced solutions; the expansion of our current markets and our ability to successfully enter new markets; anticipated trends and challenges, including competition, in the markets in which we operate or seek to operate; our expectations regarding computer vision; our ability to effectively generate and manage growth; our ability to retain key employees; the potential for intellectual property disputes or other litigation; the risks described under Item 1A of Part II — “Risk Factors,” and Item 2 of Part I — “Management’s Discussion and Analysis of Financial Condition and Results of Operations”; the risks described elsewhere in this Quarterly Report on Form 10-Q and those discussed in other documents we file with the SEC. We make these forward-looking statements based upon information available on the date of this Quarterly Report on Form 10-Q, and we have no obligation (and expressly disclaim any such obligation) to update or alter any forward-looking statements, whether as a result of new information or otherwise except as otherwise required by securities regulations.

We are a leading developer of semiconductor ~~processing~~ solutions for video that enable high-definition, or HD, video capture, analysis, sharing and display. A device that captures video includes four primary components: a lens, an image sensor, a video processor and storage memory. The video processor converts raw video input into a format that can be stored and distributed efficiently and, in some cases, analyzesIn the ~~video data to automate processes. We combine our processor design capabilities with our expertise in~~last ten years, we have primarily focused on providing video and image processors for professional and consumer camera devices, such as internet protocol, or IP, security cameras, wearable sports cameras, drones and aftermarket automotive video recorders. Over the last several years, our development efforts focused on creating advanced artificial intelligence, or AI, computer vision, or CV, algorithms and high-performance, low-power hardware platforms to enhance processing acceleration, which we refer to as our CVflow™ architecture. The CVflow architecture supports a variety of computer vision algorithms, including stereovision, object identification and ~~software development~~motion detection, obstacle detection and avoidance, terrain mapping technology, and face recognition, and allows customers to ~~provide a technology platform that is designed~~differentiate their products by porting their own algorithms and neural networks to ~~be easily scalable across multiple applications in a variety of markets and enable rapid and efficient product development for~~ our ~~customers.~~CVflow-based chips. Our system-on-a-chip, or SoC, designs fully integrate HD video processing, image processing, ~~artificial intelligence, or~~ AI, computer vision ~~or CV,~~ functionality, audio processing, and system functions onto a single chip, delivering exceptional video and image quality at high compression rates, differentiated functionality and low power consumption.

~~Over the last several years, we have been expanding our development efforts on~~ These computer ~~vision technology that we believe complements our image processing and video compression technology, and builds a foundation~~vision-based technologies are allowing us to address ~~significant opportunities in~~a broader range of markets and applications requiring AI ~~and CV applications for a variety of markets. We believe that enhanced computer vision functionality is critical both to our current~~ video ~~markets, such as Internet Protocol, or~~features, including IP security ~~camera, as well as future~~cameras, automotive cameras, consumer cameras, and industrial and robotic markets ~~such as automotive original equipment manufacturer, or OEM, cameras for advanced driving assistance systems, or ADAS,~~ and autonomous driving, and robotics. Our recent development efforts have focused on creating advanced computer vision algorithms and high-performance, low-power hardware platforms to enhance processing acceleration, which we refer to as our CVflow architecture. We believe that the integration of our proprietary highly-optimized AI computer vision technology with our video processor provides an optimized CV platform. In 2017, we introduced our first computer vision semiconductor chip, the CV1 SoC. In 2018, we introduced three new computer vision-based SoCs to enable our customers to develop intelligent camera systems for a variety of markets at different feature levels.applications.

Our revenue over the last three years has been generated primarily from sales of our SoC solutions for incorporation into specialized video and image capture devices such as wearable sports cameras, automotive aftermarket cameras, IP security cameras and cameras incorporated into ~~unmanned aerial vehicles, or UAVs or~~ drones. Our revenue from several of these markets, however, has recently experienced significant declines. As a result, we believe that our future revenue growth, if any, will significantly depend upon our ability to expand within ~~the~~ camera markets, ~~with our video and image processing SoC solutions,~~ particularly in the professional IP security and home security and monitoring camera markets, as well as emerging markets such as ~~the~~AI-enabled security cameras, AI-based driving applications, including auto-parking, driver monitoring systems, advanced blind spot detection, object detection, and deep learning algorithms for HD mapping solutions, OEM automotive advanced driver assistance systems, or ADAS, applications, and industrial and robotics markets. We expect our research and development expenditures to increase in comparison to prior periods as we devote additional resources to the development of innovative video and image processing solutions with increased functionality, such as ~~computer vision~~AI and CV capabilities, and as we target new ~~markets, such as the OEM automotive and robotics~~ markets.

We sell our SoC solutions to leading original design manufacturers, or ODMs, and OEMs globally, and in the automotive market, we also sell to Tier-1 ~~suppliers to OEMs.~~suppliers. We refer to ODMs and Tier-1 automotive suppliers as our customers and OEMs as our end customers, except as otherwise indicated or as the context otherwise requires. In the camera market, our solutions enable the creation of high-quality video content in wearable cameras, automotive cameras, IP security cameras, for both professional use and home security and monitoring, unmanned aerial vehicle cameras, also referred to as UAVs or drones, and virtual reality cameras, also referred to as 360° cameras. We also recently introduced, and continue to develop solutions to address emerging markets, such as the incorporation of computer vision functionalities for AI-enabled security cameras, AI-based driving applications, including auto-parking, driver monitoring systems, advanced blind spot detection, object detection, and deep learning algorithms for HD mapping solutions, OEM automotive ADAS applications and robotics markets.

Our sales cycles typically require a significant investment of time and a substantial expenditure of resources before we can realize revenue from the sale of our solutions, if any. Our typical sales cycle consists of a multi-month sales and development process involving our customers’ system designers and management ~~along with~~and our sales personnel and software engineers. If successful, this process culminates in a customer’s decision to use our solutions in its system, which we refer to as a design win. Our sales efforts are typically directed to the OEM of the product that will incorporate our video and image processing solution, but the eventual design and incorporation of our SoC into the product may be handled by an ODM or Tier-1 supplier on behalf of the OEM. ~~In some of the new markets we are addressing, such as AI-based automotive applications, it may take longer and require more resources to secure design wins than in our traditional markets.~~

Volume production may begin within six to 18 months ~~or even longer~~ after a design win, depending on ~~the targeted market,~~ the complexity of our customer’s product and other factors upon which we may have little or no influence. Once ~~one of~~ our solutions ~~has~~have been incorporated into a customer’s design, ~~we believe that our solution is~~they are likely to ~~remain a component~~be used for the life cycle of the customer’s ~~product for its life cycle because of the time and expense associated with redesigning a product or substituting an alternative solution.~~product. Conversely, a design loss to a competitor will likely preclude any opportunity for ~~us to generate~~ future revenue from such customer’s product. Even if we obtain a design win and our SoC remains a component through the life cycle of a customer’s product, the volume and timing of actual sales of our SoCs to the customer depend upon the production, release and market acceptance of that product, none of which are within our control. A portable consumer device typically has a product life cycle of six to 18 months, while an IP security camera typically has a product life cycle of 12 to 24 months. We anticipate that product lifecycles will typically be longer than 24 months in the OEM automotive and industrial and robotics markets, as new product introductions occur less frequently in these markets.

COVID-19 Could Adversely Affect our Business in a Material Way. The COVID-19 pandemic has resulted in significant governmental measures being implemented to control the spread of the virus, including, among others, restrictions on travel and the imposition of remote or work-from-home conditions in many of the locations where we have offices. While we have not yet experienced a significant disruption of our operations as a result of the COVID-19 pandemic, if the remote or work-from-home conditions in any of our offices continues for an extended period of time, we may experience delays in product development, a decreased ability to support our customers, reduced design win activity, and overall lack of productivity. Similarly, while we have not yet experienced a major disruption in our supply chain as a result of the COVID-19 pandemic, if there is a significant outbreak that impacts Samsung Electronic Corporation’s ability to manufacture our SoCs or our third-party contractors’ ability to assemble, test and ship our products, we could experience delays or reductions in our ability to ship products to our customers. The pandemic may also impact our customers’ ability to manufacture their products, support their customers or reduce or delay demand for their products, which could, in turn, reduce such customers’ demand for our solutions. For example, in the six months ended July 31, 2020, we saw an overall slowdown in the automotive industry which negatively impacted our revenue related to our computer vision-based solutions in the OEM video recorder market. While we cannot quantify specific impacts of the COVID-19 pandemic or actions taken by governments and businesses in response thereto, our results of operations and financial condition may be negatively affected if we encounter supply chain problems, reductions in demand due to our customers or end customers having problems, or other unexpected COVID-19 ramifications.

Political and Trade Relations Between the United States and China Could Adversely Affect our Business in a Material Way. Trade tensions between the United States and China have been escalating, which has, in our view, created and will continue to create an uncertain business environment. If additional tariffs or trade restrictions are imposed on our SoC solutions or the products of our customers, or trade restrictions are imposed on our ability to conduct business with certain customers, there could be a negative impact on our operations and financial performance. For instance, during the six months ended July 31, 2020, lower demand from our two largest China customers resulted in our revenue decreased in the professional IP security camera market. Even in the absence of new tariffs or trade restrictions, it is possible that China customers or potential customers could take actions to reduce dependence on the supply of components subject to United States trade laws, including our solutions. There are also risks that the Chinese government may, among other things, require the use of local suppliers, compel companies that do business in China to partner with local companies to conduct business and provide incentives to government-backed local customers to buy from local suppliers. In addition, the escalating social and political tensions in Hong Kong could, in the future, impact the operation of our warehouse facility in Hong Kong, through which a substantial majority of our finished SoCs are shipped to customers or logistic partners. Continued deterioration in political, social or economic conditions in Hong Kong or future actions by the Chinese or U.S. governments, could possibly result in business interruptions, substantially delayed or lost sales, loss of inventory, or increased expenses. The materialization of these risks could have a material adverse effect on our business.

Ability to Capitalize on Computer Vision Trends. We expect that computer vision functionality will become an increasingly important requirement in many of our current and future markets, including IP security, automotive, and industrial and robotics, and ~~UAV~~certain consumer markets. As a result, we believe that our ability to develop advanced AI computer vision technology, enable and support customer product development in emerging applications, such as ADAS, advanced blind spot detection, object detection, people recognition, retail analytics, and machine learning, and gain customer acceptance of our technology platform and solutions, will be critical to our future success. Moreover, achieving design wins, particularly for computer vision-centric applications in the IP security, automotive, and industrial and robotics markets, is vital to our ability to generate revenue growth. As such, we closely monitor design wins by customer and end market. However, a design win may not successfully materialize into revenue, and even if it does result in revenue, the amount generated by each design win can vary significantly.

Ability to Develop and Introduce New or Enhanced Solutions. We operate in a dynamic environment characterized by rapidly changing technologies and technological obsolescence. To compete successfully, we must design, develop, market and sell enhanced solutions with increased levels of performance and functionality that meet the expectations of our customers. As such, we continuously invest in our research and development projects, especially ~~computer vision~~CV technologies. However, failure to anticipate or timely develop new or enhanced solutions in response to technology shifts and trends could result in decreased revenue and our competitors achieving design wins we sought. Moreover, any reliability or quality problems with our solutions could harm our reputation, increase additional development and replacement costs, and prevent us from retaining existing customers and attracting new customers.

Pricing, Product Cost and Margin. Our pricing and margins depend on the volumes and features of the solutions we provide to our customers. Additionally, we make significant investments in new solutions for both cost improvements and new features that we expect to drive revenue and maintain margins. In general, solutions incorporated into more complex configurations, such as those used in high-performance camera applications or, in the future, advanced driver assistance systems, have higher prices and higher gross margins as compared to solutions sold into lower-performing, more competitive camera applications. Our average selling price can vary by market and application due to market-specific supply and demand, the maturation of products launched in previous years and the launch of new products by us or our competitors.

We continually monitor the cost of our solutions. As we rely on third-party manufacturers for the manufacture of our products, we maintain a close relationship with these suppliers to continually monitor production yields, component costs and design efficiencies.

Shifting Consumer Preferences. Our revenue is also subject to consumer preferences, regarding form factor and functionality, and how those preferences impact the video and image capture electronics that we support. For example, improved smartphone video capture capabilities led to the decline of video cameras aimed at the video and image capture market. The current video and image capture market is now characterized by a greater volume of more specialized video and image capture devices that are less likely to be replaced with smartphones, such as wearable, IP security, ~~UAV~~drone and automotive cameras. This increasing specialization of video capture devices has changed our customer base and end markets and has impacted our revenue. In the future, we expect further changes will continue to impact our business performance in those markets.

Continued Concentration of Revenue by End Market. Historically, our revenue has been significantly concentrated in a small number of end ~~markets. In fiscal year 2010, the majority of our revenue came from the pocket video, camcorder~~markets and ~~infrastructure markets. Since that time,~~ we ~~have~~ developed technologies to provide solutions for new markets as they emerged, such as the ~~wearable,~~sports camera, IP security, ~~UAV~~drone and automotive video recorder camera markets. Since fiscal year ~~2013,~~2018, the ~~wearable sports,~~ professional and consumer IP security camera markets and ~~UAV~~automotive markets, including the OEM and aftermarket video recorder market, have been our largest end markets and sales into these markets collectively generated the majority of our revenue. We believe, however, that continued expansion into new markets is required to facilitate revenue growth and customer ~~diversification as our revenue from the wearable camera and UAV camera markets has declined in recent years.~~diversification. We have recently introduced solutions to address emerging applications and markets, such as the incorporation of ~~computer vision~~CV functionalities for AI-enabled security cameras, AI-based driving applications ~~including auto-parking, driver monitoring systems, advanced blind spot detection, object detection, deep learning algorithms for HD mapping solutions, OEM automotive ADAS applications~~and industrial and robotics markets. While we will continue to seek to expand our end market exposure, we anticipate that sales to a limited number of end markets will continue to account for a significant percentage of our total revenue for the foreseeable future. Our end market concentration may cause our financial performance to fluctuate significantly from period to period based on the success or failure of products that our SoCs are designed into as well as the overall growth or decline in the video capture markets in which we compete. In addition, we derive a significant portion of our revenue from a limited number of ODMs who build products on behalf of a limited number of OEMs and from a limited number of OEMs to whom we ship directly. We believe that our operating results for the foreseeable future will continue to depend on sales to a relatively small number of customers.

Ability to Capitalize on Connectivity Trends. Mobile connected devices are ubiquitous today and play an increasingly prominent role in consumers’ lives. The constant connectivity provided by these devices has created a demand for connected electronic peripherals such as video and image capture devices. Our ability to capitalize on these trends by supporting our end customers in the development of connected peripherals that seamlessly cooperate with other connected devices and allow consumers to distribute and share video and images with online media platforms is critical for our success. We have added wireless communication functionality into our solutions for wearable, IP security, ~~UAV~~drone and automotive video recorder cameras. The combination of our compression technology with wireless connectivity enables wireless video streaming and uploading of videos and images to the Internet. Our solutions enable IP security camera systems to stream video content to either cloud infrastructure or connected mobile devices, and our solutions for wearable and ~~UAV~~drone cameras allow consumers to quickly stream or upload video and images to social media platforms.

Sales Volume. A typical design win that successfully launches into the marketplace can generate a wide range of sales volumes for our solutions, depending on the end market demand for our customers’ products. Our ability to accurately forecast demand can be adversely affected by a number of factors, including the reputation of the end customer, market penetration, product capabilities, size of the end market that the product addresses, our end customers’ ability to sell their products, miscalculations by our customers of their inventory requirements, changes in market conditions, adverse changes in our product order mix and fluctuating demand for our customers’ products. In certain cases, we may provide volume discounts on sales of our solutions, which may be offset by lower manufacturing costs related to higher volumes. In general, our customers with greater market penetration and better branding tend to develop products that generate larger volumes over the product life cycle.

Customer Product Life Cycle. We estimate our customers’ product life cycles based on the customer, type of product and end market. We typically commence commercial shipments from six to 18 months following a design win; however, in some markets, more lengthy product and development cycles are possible, depending on the scope and nature of the project, such as in the automotive OEM market. A portable consumer device typically has a product life cycle of six to 18 months, and an IP security camera typically has a product life cycle of 12 to 24 months. We anticipate that product development and product life cycles will typically be longer than 24 months in the OEM automotive, Tier-1 automotive suppliers and robotics markets, as new product introductions typically occur less frequently in these markets.

The following table sets forth a summary of our statement of operations for the periods indicated:

	Three Months Ended October 31,						Nine Months Ended October 31,						Three Months Ended July 31,						Six Months Ended July 31,
	2019			2018			2019			2018			2020			2019			2020			2019
	(dollars in thousands)												(dollars in thousands)
Revenue	$	67,922		$	57,286		$	171,520		$	176,698		$	50,113		$	56,410		$	104,758		$	103,598
Cost of revenue		28,819			22,701			72,127			69,208			19,155			23,973			41,780			43,308
Gross profit		39,103			34,585			99,393			107,490			30,958			32,437			62,978			60,290
Operating expenses:
Research and development		32,480			31,653			95,917			95,446			32,802			30,420			67,002			63,437
Selling, general and administrative		13,791			12,354			39,293			38,098			13,445			12,425			26,880			25,502
Total operating expenses		46,271			44,007			135,210			133,544			46,247			42,845			93,882			88,939
Loss from operations		(7,168	)		(9,422	)		(35,817	)		(26,054	)		(15,289	)		(10,408	)		(30,904	)		(28,649	)
Other income, net		1,917			993			6,308			2,517			1,280			2,195			2,558			4,391
Loss before income taxes		(5,251	)		(8,429	)		(29,509	)		(23,537	)		(14,009	)		(8,213	)		(28,346	)		(24,258	)
Provision (benefit) for income taxes		(942	)		592			2,302			2,367
Provision for income taxes														747			1,978			1,873			3,244
Net loss	$	(4,309	)	$	(9,021	)	$	(31,811	)	$	(25,904	)	$	(14,756	)	$	(10,191	)	$	(30,219	)	$	(27,502	)

The following table sets forth operating results as a percentage of revenue of each line item for the periods indicated:

	Three Months Ended October 31,								Nine Months Ended October 31,								Three Months Ended July 31,								Six Months Ended July 31,
	2019				2018				2019				2018				2020				2019				2020				2019
Revenue	100			%	100			%	100			%	100			%	100			%	100			%	100			%	100			%
Cost of revenue		42				40				42				39				38				42				40				42
Gross profit		58				60				58				61				62				58				60				58
Operating expenses:
Research and development		48				55				56				54				65				54				64				61
Selling, general and administrative		20				22				23				22				27				22				26				25
Total operating expenses		68				77				79				76				92				76				90				86
Loss from operations		(10	)			(17	)			(21	)			(15	)			(30	)			(18	)			(30	)			(28	)
Other income, net		3				2				4				1				3				4				2				4
Loss before income taxes		(7	)			(15	)			(17	)			(14	)			(27	)			(14	)			(28	)			(24	)
Provision (benefit) for income taxes		(1	)			1				2				1
Provision for income taxes																		2				4				1				3
Net loss		(6	)	%		(16	)	%		(19	)	%		(15	)	%		(29	)	%		(18	)	%		(29	)	%		(27	)	%

We derive substantially all of our revenue from the sale of HD and Ultra HD video and image processing SoC solutions to IP security camera OEMs, IP security camera ODMs, OEM automotive or Tier-1 automotive suppliers, either directly or through our distributors. In recent years, our SoC solutions have been primarily used in camera markets, such as IP security, automotive video recorder, drone and wearable cameras. Although we expect these camera markets, in particular the IP security ~~camera market,~~and automotive video recorder markets, to continue to generate revenue for the foreseeable future, we have recently introduced new SoCs targeting emerging ~~computer vision~~CV applications in the IP security camera, OEM automotive and industrial and robotics markets. We derive a substantial portion of our revenue from sales made indirectly through one of our distributors, Wintech Microelectronics Co., Ltd., or Wintech, and directly to one of our ODM customers, Chicony Electronics Co., Ltd., or Chicony.

We have historically experienced seasonal fluctuations in our quarterly revenue with our third fiscal quarter normally being the highest revenue quarter. This fluctuation has been driven primarily by increased sales in IP security and consumer camera markets as our customers build inventories in preparation for the holiday shopping season. Our average selling prices fluctuate based on the mix of our solutions sold in a period which reflects the impact of both changes in unit sales of existing solutions as well as the introduction and sales of new solutions. Our solutions are typically characterized by a life cycle that begins with higher average selling prices and lower volumes, followed by broader market adoption, higher volumes and average selling prices that are lower than initial levels.

The end markets into which we sell our products have seen significant changes as consumer preferences have evolved in response to new technologies. As a result, the composition and timing of our revenue may differ meaningfully during periods of technology or consumer preference changes. We expect shifts in consumer use of video capture to continue to change over time, as ~~computer vision~~AI and CV specialized use cases emerge and video capture continues to proliferate.

Cost of revenue includes the cost of materials such as wafers processed by third-party foundries, costs associated with packaging, assembly and testing, and our manufacturing support operations, such as logistics, planning and quality assurance. Cost of revenue also includes indirect costs, such as warranty, inventory valuation reserves and other general overhead costs.

We expect that our gross margin may fluctuate from period to period as a result of changes in customer mix, average selling price, product mix and the introduction of new products by us or our competitors. In general, solutions incorporated into more complex configurations, such as those used in high-performance cameras, and in future advanced automotive OEM applications, have had or are expected to have higher prices and higher gross margins, as compared to solutions sold into the lower-performance, more competitive camera applications. As semiconductor products mature and unit volumes sold to customers increase, their average selling prices typically decline. These declines may be paired with improvements in manufacturing yields and lower wafer, packaging and test costs, which offset some of the margin reduction that could result from lower selling prices. ~~We believe that our gross margin will decline in the future as we continue to penetrate the highly competitive camera market and, in particular, the IP security market.~~

Research and development expense consists primarily of personnel costs, including salaries, stock-based compensation and employee benefits. The expense also includes costs of development incurred in connection with our collaborations with our foundry vendors, costs of licensing intellectual property from third parties for product development, costs of development for software and hardware tools, cost of fabrication of mask sets for prototype products, and allocated depreciation and facility expenses, net of any research and development grants. All research and development costs are expensed as incurred. We expect our research and development expense to increase in absolute dollars as we continue to enhance and expand our product features and offerings and increase headcount for new SoC development and development of computer vision technology, especially for the OEM automotive market.

Selling, general and administrative expense consists primarily of personnel costs, including salaries, stock-based compensation and employee benefits for our sales, marketing, finance, human resources, information technology and administrative personnel. The expense also includes professional service costs related to accounting, tax, legal services, and allocated depreciation and facility expenses. We expect our selling, general and administrative expense to increase in absolute dollars as we continue to maintain the infrastructure and expand the size of our sales and marketing organization to support our business strategy of addressing new opportunities with our computer vision technology.

Other income, net, consists primarily of interest and other income from debt security investments and cash deposits with financial institutions.

We are incorporated and domiciled in the Cayman Islands and also conduct business in several countries such as the United States, China, Taiwan, Hong Kong, Italy, South Korea and Japan, and we are subject to taxation in those jurisdictions. Our worldwide operating income is subject to varying tax rates, and our effective tax rate is highly dependent upon the geographic distribution of our earnings or losses and the tax laws and regulations in each geographical region. It is also subject to fluctuation from changes in the valuation of our deferred tax assets and liabilities; tax benefits from excess stock-based compensation deductions; transfer pricing adjustments and the tax effects of nondeductible compensation. We have historically had lower effective tax rates as a substantial percentage of our operations are conducted in lower-tax jurisdictions. If our operational structure was to change in such a manner that would increase the amount of operating income subject to taxation in higher-tax jurisdictions, or if we were to commence operations in jurisdictions assessing relatively higher tax rates, our effective tax rate could fluctuate significantly on a quarterly basis and/or be adversely affected.

Significant judgment is required in evaluating our uncertain tax positions and determining our provision for income taxes. Although we believe our reserves are reasonable, no assurance can be given that the final tax outcome of these matters will not be different from that which is reflected in our historical provision for income taxes and accruals. We adjust these reserves in light of changing facts and circumstances, such as the closing of a tax audit or the refinement of an estimate. To the extent that the final tax outcome of these matters is different than the amounts recorded, such differences will impact the provision for income taxes in the period in which such determination is made. The provision for income taxes includes the impact of uncertain tax position reserves and changes to reserves that are considered appropriate, as well as the related net interest and penalties.

Significant judgment is also required in determining any valuation allowance recorded against deferred tax assets. In assessing the need for a valuation allowance, we consider all available evidence, including past operating results, estimates of future taxable income, and the feasibility of tax planning strategies. In the event that we change our determination as to the amount of deferred tax assets that can be realized, we will adjust our valuation allowance with a corresponding impact to the provision for income taxes in the period in which such determination is made.

Comparison of the Three and ~~Nine~~Six Months Ended ~~October~~July 31, ~~2019~~2020 and ~~2018~~2019

The increased revenue for the three months ended October 31, 2019, as compared to the same period in the prior fiscal year, was primarily attributable to higher revenue from professional IP security camera and consumer camera markets. In the professional IP security camera market, significant growth in the China region as a result of inventory build-up by our two largest China customers, and continued shipment of our computer vision-based solutions in the North America region, resulted in significant revenue growth in the third fiscal quarter of fiscal year 2020. In the consumer camera markets, revenue growth was primarily due to strong demand from action camera and drone markets in preparation for the holiday shopping season. The increase was also attributable to higher revenue from automotive camera markets, as a result of initial purchases of our computer vision-based solutions in the automotive aftermarket and a resumption of demand from the OEM video recorder market, principally in the China and Japan regions. The increased revenue was partially offset by decreased revenue in the consumer IP security camera and other consumer markets, including non-sports wearable camera and virtual reality markets.

The decreased revenue for the ~~nine~~three months ended ~~October~~July 31, ~~2019,~~2020, as compared to the same period in the prior fiscal year, was primarily attributable to lower revenue from ~~consumer~~the sports camera, ~~markets, including non-sports wearable~~professional IP security camera, ~~virtual reality,~~ and ~~drone~~automotive markets. ~~The decrease was also attributable to lower revenue~~In the sports camera market, incorporation of our solutions into newly launched sports camera products from ~~automotive markets, including the automotive aftermarket and OEM video recorder market, caused by~~Dajiang Innovation Technology Inc., or DJI, resulted in a ~~significant slowdown~~ramp of SoC shipments in the ~~automotive industry in the first half~~second quarter of fiscal year 2020 ~~and promotional activity in fiscal year 2019 from a large automotive customer~~ that did not recur in the current fiscal ~~year.~~period. In the professional IP security camera market, despite continued growth in the North America and Asia regions, lower demand from our two largest China customers caused by higher inventory build-up in fiscal year 2020 and escalated trade tensions between the United States and China, together with less demand from the Europe region, resulted in a significant revenue decrease in this market. The decreased revenue in the automotive markets was primarily due to an overall slowdown in the automotive industry. The lower revenue was partially offset by increased revenue in the consumer IP security camera and other consumer markets, including drone and wearable camera markets. In the consumer IP security camera market, revenue growth was led by the home security and monitoring market in the North America ~~region,~~region. For the six months ended July 31, 2020, increased revenue was primarily attributable to higher revenue in the consumer IP security camera and drone markets, partially offset by decreased revenue in the sports camera and professional IP security camera markets. While revenue was relatively flat for the six months ended July 31, 2020 compared to the same period in the prior fiscal year, we experienced continued demand for our new CV-based solutions in the professional IP security camera market ~~in the Asia~~ and ~~Europe regions. In the sports camera market, incorporation~~made initial shipments of our CV-based solutions into ~~newly launched action~~the consumer IP security camera ~~products from~~ ~~DJI~~ ~~partially offset revenue loss from our sales to GoPro for the nine months ended October 31, 2019.~~and automotive markets in fiscal year 2021.

	Three Months Ended October 31,						Change					Nine Months Ended October 31,						Change						Three Months Ended July 31,						Change						Six Months Ended July 31,						Change
	2019			2018			Amount		%			2019			2018			Amount			%			2020			2019			Amount			%			2020			2019			Amount			%
	(dollars in thousands)																							(dollars in thousands)
Cost of revenue	$	28,819		$	22,701		$	6,118		27.0	%	$	72,127		$	69,208		$	2,919			4.2	%	$	19,155		$	23,973		$	(4,818	)		(20.1	)%	$	41,780		$	43,308		$	(1,528	)		(3.5	)%
Gross profit		39,103			34,585			4,518		13.1	%		99,393			107,490			(8,097	)		(7.5	)%		30,958			32,437			(1,479	)		(4.6	)%		62,978			60,290			2,688			4.5	%
Gross margin		57.6	%		60.4	%		—		(2.8	)%		57.9	%		60.8	%		—			(2.9	)%		61.8	%		57.5	%		—			4.3	%		60.1	%		58.2	%		—			1.9	%

Cost of revenue ~~increased~~decreased for the three months ended ~~October~~July 31, ~~2019,~~2020, as compared to the same period in the prior fiscal year, primarily due to ~~increased volume~~lower volumes of SoC shipments associated with ~~increased revenue for the professional IP security camera market, consumer markets, including sports camera and drone markets, as well as automotive camera markets.~~decreased revenue. Cost of revenue ~~increased~~decreased for the ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, as compared to the same period in the prior fiscal year, primarily due to ~~increased volume of~~lower SoC shipments ~~for~~in the professional IP security camera ~~markets, which were~~market, partially offset by ~~decreased~~increased shipments ~~of SoCs for~~in the ~~automotive~~consumer IP security camera and drone markets.

Gross margin ~~decreased~~increased for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, as compared to the same periods in the prior fiscal year, primarily due to ~~a large percentage of our total revenue coming from~~gross margin improvement in the professional IP security camera market ~~which continued to have lower gross margins over the periods, principally in~~as a result of customer concentration shift from the China ~~region. The decreased gross margin was partially offset by a shift in revenue composition~~region to the ~~higher gross margin automotive camera markets~~North America and ~~consumer camera markets, including action camera and drone markets, for the three months ended October 31, 2019.~~Asia regions other than China.

Research and development expense increased for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, as compared to the same periods in the prior fiscal year, primarily due to ~~increased salary-related and employee benefit expenses as a result of increased headcount, issuances of stock and our annual employee bonus program.~~ ~~Our engineering headcount increased to 560 at October 31, 2019 compared to 552 at October 31, 2018. For the three and nine months ended October 31, 2019, salary-related expenses increased by~~ approximately ~~$0.7 million and $2.2 million, respectively, and employee benefit expenses increased by approximately $1.1 million and $2.5 million, respectively. The increases were partially offset by approximately $0.5 million and $3.7~~$3.2 million of research and development grants from a foreign government ~~for~~in the second quarter of prior fiscal year that did not recur in the current fiscal year. The increased expenses were also attributable to increased employee benefit expense and SoC development cost, partially offset by decreased equipment expense, travel expense, consulting services and a foreign subsidy granted due to the COVID-19 pandemic. For the three and ~~nine~~six months ended ~~October~~July 31, ~~2019, respectively.~~ ~~SoC development costs also decreased~~2020, employee benefit expense increased by approximately ~~$0.6~~$0.5 million and $0.5 million, respectively, as a result of issuance of stock and benefit programs. Our engineering headcount was flat at 561 at July 31, 2020 compared to 559 at July 31, 2019. SoC development cost increased by $0.9 million and $2.6 million for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, respectively, ~~as compared to the same periods in the prior fiscal year,~~ due to project timing and number of chips in development. In the second quarter of fiscal year 2021, there was approximately $0.7 million of a foreign subsidy granted related to the COVID-19 pandemic. For the three and six months ended July 31, 2020, the equipment expense, travel expense and contractor services decreased by aggregate of $1.4 million and $2.1 million, respectively, caused by COVID-19 pandemic restrictions.

Selling, general and administrative expense increased for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, as compared to the same periods in the prior fiscal year, primarily due to increased employee ~~compensation expenses~~benefit expense, as well as increased professional services and facility cost. For the three and six months ended July 31, 2020, employee benefit expense increased by approximately ~~$1.3~~$0.3 million and ~~$2.0~~$0.6 million, respectively, as a result of ~~increased salary, issuances~~issuance of stock and ~~our annual employee bonus program. For the nine months ended October 31, 2019, the increase was~~benefit programs. Professional services and facility related cost increased by approximately $1.1 million and $1.4 million, respectively. The increases were partially offset by approximately ~~$0.6~~$0.4 million and $0.7 million of less expenditures on ~~professional services.~~travel and marketing activities for the three and six months ended July 31, 2020, respectively, caused by COVID-19 pandemic restrictions.

The ~~increase~~decrease in other income, net, for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, as compared to the same periods in the prior fiscal year, was primarily due to ~~aggregate increases~~decreases of approximately ~~$1.0~~$1.3 million and ~~$3.6~~$1.8 million, respectively, in interest and other income from our deposits and debt security ~~investments. The increases were primarily the~~investments as a result of ~~larger invested balances~~lower interest rates during the current fiscal year due to COVID-19 pandemic and a higher number of debt securities purchased at ~~discounts.~~premium. The decrease was also attributable to an approximately $0.3 million of a foreign subsidy granted during the first half of fiscal year 2020 that did not recur in the current fiscal year. The decrease was partially offset by approximately $0.5 million and $0.4 million of net gains from foreign currency transactions and remeasurements for the three and six months ended July 31, 2020, respectively.

	Three Months Ended October 31,							Change					Nine Months Ended October 31,						Change					Three Months Ended July 31,						Change					Six Months Ended July 31,						Change
	2019				2018			Amount			%		2019			2018			Amount			%		2020			2019			Amount			%		2020			2019			Amount			%
	(dollars in thousands)																							(dollars in thousands)
Provision (benefit) for income taxes	$	(942	)		$	592		$	(1,534	)	(259.1)	%	$	2,302		$	2,367		$	(65	)	(2.8)	%
Provision for income taxes																								$	747		$	1,978		$	(1,231	)	(62.2)	%	$	1,873		$	3,244		$	(1,371	)	(42.3)	%
Effective tax rate	17.9			%	(7.0)		%	—			24.9	%	(7.8)		%	(10.1)		%	—			2.3	%	(5.3)		%	(24.1)		%	—			18.8	%	(6.6)		%	(13.4)		%	—			6.8	%

The quarterly income taxes reflect an estimate of the corresponding fiscal year’s annual effective tax rate and include, when applicable, adjustments from discrete tax items arising in that quarter.

The decrease in income tax expense for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019, respectively,~~2020, as compared to the same periods in the prior fiscal year, was primarily due to ~~an increase in tax benefits from excess stock-based compensation deductions, partially offset by~~ a decrease in the proportion of profits generated in ~~lower-tax jurisdictions.~~higher tax jurisdictions, as well as an increase in the U.S. federal research tax credit, partially offset by an increase in non-deductible stock-based compensation.

As of ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019,~~2020, we had cash, cash equivalents and marketable debt securities of approximately ~~$400.8~~$410.7 million and ~~$358.9~~$404.7 million, respectively. We invest in highly liquid, short-term marketable debt securities and hold these investments as available-for-sale securities. As of ~~October~~July 31, ~~2019,~~2020, these securities had a fair value of approximately ~~$209.8~~$214.0 million with ~~insignificant~~immaterial unrealized losses caused by ~~fluctuations in~~ market ~~value.~~fluctuations.

	Nine Months Ended October 31,					Six Months Ended July 31,
	2019		2018			2020			2019
	(in thousands)					(in thousands)
Net cash provided by operating activities	$	35,284	$	10,498		$	5,222		$	13,419
Net cash provided by (used in) investing activities		16,355		(50,650	)		(16,555	)		11,871
Net cash provided by (used in) financing activities		6,622		(94,180	)
Net cash provided by financing activities							578			3,354
Net increase (decrease) in cash, cash equivalents and restricted cash	$	58,261	$	(134,332	)	$	(10,755	)	$	28,644

Net cash provided by operating activities ~~increased~~decreased for the ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, as compared to the same period in the prior fiscal year, primarily due to increased net loss adjusted by non-cash expenses, decreased cash receipts associated with the timing of payments from customers, decreased ~~inventory and other asset purchases, and increased~~ liabilities associated with the timing of payments to ~~suppliers.~~suppliers and increased inventory purchases. The decreased cash flows from operating activities were partially offset by decreased cash payments for other operating asset purchases.

Net cash ~~provided by~~used in investing activities increased for the ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, as compared to the same period in the prior fiscal year, primarily due to anapproximately $18.0 million of additional ~~$87.2~~investments in debt securities, as well as approximately $10.7 million inless cash receipts from the sale and maturity of debt ~~securities, which~~securities. The increase was partially offset by approximately ~~$21.2~~$0.3 million of ~~additional investments in debt securities. The increase was also attributable to approximately $1.0 million reduction in expenditures~~less expenditure on ~~property and equipment~~capital asset purchases.

Net cash provided by financing activities ~~increased~~decreased for the ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, as compared to the same period in the prior fiscal year, primarily due to ~~$96.4~~approximately $1.6 million of less cash proceeds from option exercises and employee stock purchase withholdings, $1.0 million of cash used for the repurchasing of our ordinary shares under the stock repurchase program, ~~during the nine months ended October 31, 2018 that was not incurred during the nine months ended October 31, 2019. The increase was also attributable to approximately $4.8~~as well as an additional $0.2 million of ~~additional cash proceeds from option exercises~~payment for intangible asset purchases.

Since the inception of the stock repurchase programs in June 2016, a total of $275.0 million has been authorized for repurchase, and ~~employee stock purchase withholding. The increase was partially offset by additional payments~~to date, we have repurchased a total of 4,011,595 shares for approximately ~~$0.4~~$175.8 million in cash under the programs. As of July 31, 2020, $49.0 million remained available for ~~intangible assets purchased in fiscal year 2020.~~repurchases under the current repurchase program through June 30, 2021. Repurchases under the program may be made from time-to-time through open market purchases, 10b5-1 plans or privately negotiated transactions subject to market conditions, applicable legal requirements and other relevant factors. The repurchase program does not obligate us to acquire any particular amount of ordinary shares, and it may be suspended at any time at the company's discretion. Repurchases are funded using working capital and any repurchased shares are recorded as authorized but unissued shares.

As of ~~October~~July 31, ~~2019,~~2020, we had cash, cash equivalents and marketable debt securities of approximately ~~$400.8~~$410.7 million. We believe that our existing cash balances will be sufficient to meet our anticipated cash requirements through at least the next 12 months. In the future, we expect our operating and capital expenditures to increase as we increase headcount, expand our business activities, and implement and enhance our information technology platforms. As we expand our operations, we may require more working capital. If our available cash balances are insufficient to satisfy our future liquidity requirements, we may seek to sell equity or convertible debt securities or borrow funds commercially. The sale of equity and convertible debt securities may result in dilution to our shareholders, and those securities may have rights senior to those of our ordinary shares. If we raise additional funds through the issuance of convertible debt securities, these securities could contain covenants that would restrict our operations. We may require additional capital beyond our currently anticipated amounts. Additional capital may not be available to us on reasonable terms, or at all.

Our ~~short-term~~short- term and long-term capital requirements will depend on many factors, including the following:

As of ~~October~~July 31, ~~2019,~~2020, we had purchase obligations with our independent contract manufacturers of ~~$27.6~~$24.4 million.

~~The Company adopted~~ ~~ASC 842, Leases~~ ~~on February 1, 2019. As a result, the contractual obligations related to future lease payments are reflected on the condensed consolidated balance sheets as the lease liabilities.~~ ~~In August 2019, VisLab, our wholly-owned subsidiary,~~ was granted a land lease for 35 years with an obligation to construct a building on the land in Parma, Italy. We will be responsible for the costs of construction and occupy the building after completion of construction for the remainder of the lease term. We also signed a separate lease for an additional space for our U.S. office for a period of 56 months. The lease associated with the additional space of our U.S. office and the Parma lease will be recorded as ROU assets and lease liabilities in the balance sheet upon their respective lease commencement dates. The total estimated future undiscounted cash payments are approximately $1.7 million for the additional space for the U.S. office and $2.2 million for the Parma lease, of which ~~$1.8 million will be paid in the first two years and the remaining balance of $0.4 million will be paid over the remainder of the lease term~~. ~~See Note 7, "Leases" in the Notes to Condensed Consolidated Financial Statements for more details about these two lease liabilities.~~

Except as described above with respect to the manufacturing purchase obligations, ~~and leases,~~ there were no other material changes in our contractual obligations, commitments and contingencies from those disclosed in our Annual Report on Form 10-K for the fiscal year ended January 31, ~~2019.~~2020. Please see Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Contractual Obligations, Commitments and Contingencies” in our Annual Report on Form 10-K for the fiscal year ended January 31, ~~2019~~2020 for a description of our contractual obligations.

As of ~~October~~July 31, ~~2019,~~2020, we did not engage in any off-balance sheet arrangements, including the use of structured finance, special purpose entities or variable interest entities.

See Note 1 of Notes to Condensed Consolidated Financial Statements for information regarding recently issued accounting pronouncements.

There have been no material changes to our critical accounting policies and estimates as compared to the critical accounting policies and estimates described in our Annual Report on Form 10-K for the ~~2019~~2020 fiscal year filed with the SEC on March ~~29, 2019,~~27, 2020, except for the recently adopted accounting guidance on ~~leases~~measurement of credit losses on financial instruments as discussed in Notes 1 and 72 of Notes to Condensed Consolidated Financial Statements.

As of ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019,~~2020, we had cash, cash equivalents and marketable debt securities ~~and restricted cash~~ totaling ~~$400.8~~$410.7 million and ~~$358.9~~$404.7 million, respectively. Our cash is deposited in checking accounts with reputable financial institutions. The cash equivalents and marketable debt securities consist primarily of investments in money market funds, asset-backed securities, commercial paper, U.S. government securities, and debt securities of corporations. Our cash is held for working capital purposes. We do not enter into investments for trading or speculative purposes.

The primary objectives of our investment activities are to preserve ~~principal,~~capital, provide liquidity and maximize income without significantly increasing risk. Some of the securities we invest in are subject to market risk. This means that a change in prevailing interest rates may ~~cause~~affect the ~~principal amount~~interest income on our cash, cash equivalents and marketable debt securities, and the market value of ~~the investment to fluctuate.~~those securities. To minimize this risk, we maintain our portfolio ~~of short-term investments~~ in a variety of debt securities with high ~~liquidity.~~liquidity and low credit risk. We do not enter into investments for trading or speculative purposes. A 10% change in interest rates will not have a material impact on our future interest income or investment fair value. The liquidity risk and the risk associated with fluctuating interest rates isare limited to our investment portfolio.

To date, all of our product sales and inventory purchases have been denominated in U.S. dollars. We therefore have not had any foreign currency risk associated with these two activities. The functional currency of all of our entities is the U.S. dollar. Our operations outside of the United States incur operating expenses and hold assets and liabilities denominated in foreign currencies, principally the New Taiwan Dollar and the Chinese Yuan Renminbi. Our results of operations and cash flows are subject to fluctuations due to changes in foreign currency exchange rates, particularly ~~the exchange rates between the Chinese Yuan Renminbi and the U.S. dollar and between the New Taiwan Dollar and~~with respect to a strengthening of the U.S. dollar. As we grow our operations, our exposure to foreign currency risk could become more significant. To date, we have not entered into any foreign currency exchange contracts and currently do not expect to enter into foreign currency exchange contracts for trading or speculative purposes.

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of our disclosure controls and procedures as of the end of the period covered by this Quarterly Report on Form 10-Q. The term “disclosure controls and procedures” (as defined in Rules 13a- 15(e) and 15d- 15(e)) under the Securities Exchange Act of 1934, as amended, or the Exchange Act, means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. Management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the cost-benefit relationship of possible controls and procedures.

Based upon such evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that, as of ~~October~~July 31, ~~2019,~~2020, our disclosure controls and procedures were effective at the reasonable assurance level.

There were no changes in our internal control over financial reporting during the Company’s fiscal quarter ended ~~October~~July 31, ~~2019~~2020 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

Inherent Limitations of Disclosure Controls and Internal Control over Financial Reporting

Because of their inherent limitations, our disclosure controls and procedures and our internal control over financial reporting may not prevent material errors or fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. The effectiveness of our disclosure controls and procedures and our internal control over financial reporting is subject to risks, including that the controls may become inadequate because of changes in conditions or that the degree of compliance with our policies or procedures may deteriorate.

Certain factors may have a material adverse effect on our business, financial condition and results of operations. You should consider carefully the risks and uncertainties described below, in addition to other information contained in this Quarterly Report on Form 10-Q, including our unaudited condensed consolidated financial statements and related notes. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, may also become important factors that adversely affect our business. If any of the following risks actually occurs, our business, financial condition, results of operations, and future prospects could be materially and adversely affected. In that event, the trading price of our ordinary shares could decline, and you could lose part or all of your investment.

The global COVID-19 pandemic has significantly affected the populations of the United States, Italy, China and many other countries. The outbreak has resulted in significant governmental measures being implemented to control the spread of COVID-19, including, among others, shelter in place orders and restrictions on travel, manufacturing and the movement of employees in many regions of the world, as well as responsive measures from businesses. As a result, we have had to impose remote or work from home conditions in many of our offices, including the United States, Italy, Japan and South Korea. The majority of our SoCs are manufactured in South Korea and assembled and tested by third parties in Taiwan. In addition, certain of our logistics and shipping operations are in Taiwan and Hong Kong. If any of our third-party manufacturing, assembly and testing partners or our logistics and shipping operations are unable to operate efficiently or at all due to responsive measures to COVID-19, we may experience delays in our supply chain and be unable to meet our customers’ expectations and requirements. If remote or work from home conditions in any of our offices continue for an extended period of time, we may experience delays in product development, a decreased ability to support our customers, reduced design win activity, and overall lack of productivity. Similarly, our customers and potential customers may also experience delays in the development of their products, reduced sales activity, decreased ability to support their customers, closures of their manufacturing facilities or inability to obtain other components, as a result of measures implemented to control the spread of COVID-19. COVID-19 has negatively impacted the overall global economy and, as a result of, may negatively impact demand for our customers’ products and, in turn, impact demand for our solutions. If COVID-19 continues to progress in ways that further disrupt the manufacture, shipment and buying patterns of our products or the products of our customers, or further deteriorates the global economy, it may materially negatively impact our operating results for the second half of fiscal 2021 and subsequent periods, including revenue, gross margins, operating margins, cash flows and other operating results and our overall business.

If our customers do not design our solutions into their product offerings, or if our customers’ product offerings are not commercially successful, our business would suffer.

We sell our video and image processing system-on-a-chip, or SoC, solutions to original equipment manufacturers, or OEMs, who include our SoCs in their products, and to original design manufacturers, or ODMs, who include our SoCs in the products that they supply to OEMs. We generally refer to ODMs as our customers and OEMs as our end customers, except as otherwise indicated or as the context otherwise requires. Our video and image processing SoCs are generally incorporated into our customers’ products at the design stage, which is referred to as a design win. As a result, we rely on OEMs to design our solutions into the products that they design and sell. Without these design wins, our business would be significantly harmed. We often incur significant expenditures developing a new SoC solution without any assurance that any OEM will select our solution for design into its own product. Once an OEM designs a competitor’s device into its product, it becomes significantly more difficult for us to sell our SoC solutions to that OEM because changing suppliers involves significant cost, time, effort and risk for the OEM. We anticipate that it will take longer and require more resources and greater expenditures to achieve design wins, and likely take longer to generate revenue from such design wins in the new markets we are targeting, such as the OEM automotive and robotics markets, than our ~~current~~legacy camera markets. In addition, trade tensions between the United States and China and potential new export restrictions, as discussed in subsequent risk factors, may make it more difficult to secure future design wins with China customers. Once an OEM designs a competitor’s device into its product, it becomes significantly more difficult for us to sell our SoC solutions to that OEM because changing suppliers involves significant cost, time, effort and risk for the OEM.

Even if an OEM designs one of our SoC solutions into its product, we cannot be assured that the OEM’s product will be commercially successful over time or at all. For example, in the past we have secured design wins for camera products that were never commercially released by our customer or did not sell in volumes initially forecast by the customer, as a result of factors beyond our control. If other products or other product categories incorporating our SoC solutions are not commercially successful or experience rapid decline, our revenue and business will suffer. For example, we have from time to time experienced declines in demand for our solutions in professional IP security, automotive and several consumer camera markets, including wearable cameras, virtual reality cameras and cameras incorporated into unmanned aerial vehicles, also referred to as UAVs or drones, which has negatively impacted our business.

Similarly, ~~even~~ if an OEM designs one of our SoC solutions into its product, we are not assured that we will receive or continue to receive new design wins from that ~~OEM. For example, two~~OEM, which could negatively impact our business.

If we fail to penetrate new markets, our revenue and financial condition could be harmed.

Years ago, a substantial portion of our ~~largest~~revenue was generated from sales of our SoCs to OEMs inand ODMs of HD video cameras, including IP security cameras, wearable cameras and drones. Our revenue from several of these markets, however, has experienced significant declines. As a result, we believe that our future revenue growth, if any, will significantly depend on our ability to expand within the ~~consumer~~ camera markets with our new artificial intelligence, or AI, computer vision SoC solutions, particularly in emerging markets such as the ~~past few years, GoPro, Inc.,~~OEM automotive, robotics and industrial markets, as well as the existing professional IP security and home security and monitoring camera markets. Each of these markets presents distinct and substantial risks and, in many cases, requires us to develop new functionality or ~~GoPro,~~software to address the particular requirements of that market. We anticipate that as we continue to move into new markets, such as the OEM automotive, robotics and ~~Dajiang Innovation Technology Inc.,~~industrial markets, we will likely face competition from larger competitors with greater resources and more history in these markets. If any of these markets do not develop as we currently anticipate, or ~~DJI, have begun using competing solutions in their mainstream products, which has significantly reduced these OEMs’demand for~~if the development of such markets is delayed or impacted by factors outside of our control, such as the COVID-19 pandemic, or if we are unable to penetrate them successfully with our solutions, our revenue could decline, and our financial condition would be negatively ~~impacted~~impacted. Some of these markets are primarily served by only a few large, multinational OEMs with substantial negotiating power relative to us and, in some instances, with internal solutions that are competitive to our ~~revenue.~~products. Meeting the technical requirements and securing design wins with any of these companies will require a substantial investment of our time and resources and we cannot assure you that we will secure design wins from these or other companies or that we will achieve meaningful revenue from the sales of our solutions into these markets. If we fail to penetrate these or other new markets we are targeting, our financial condition would likely suffer. Moreover, if we are successful in achieving design wins in these new markets, it will likely take longer to generate revenue from such design wins than in our current markets.

Our ability to sell our products to several China customers has been restricted.

On October 9, 2019, our security camera customers Hangzhou Hikvision Digital Technology Co., Ltd, or Hikvision, and Zhejiang Dahua Technology Co., Ltd., or Dahua, were added to the Entity List of the Bureau of Industry and Security, or BIS, of the U.S. Department of Commerce, or Commerce, which imposes limitations on the supply of certain U.S. items to the listed entities. While the addition of Hikvision and Dahua to the Entity List negatively impacts our ability to ship items subject to BIS regulations, including US-produced SoC solutions, to these entities, we have determined that that we are able to ship some foreign-produced SoC products to the listed entities in compliance with applicable law. Notwithstanding our ability to continue to supply some SoC products to the listed entities, these customers may seek to obtain similar or substitute products from our competitors that are not subject to these limitations, or to develop similar or substitute products themselves. We also cannot be certain what additional actions to the U.S. government may take with respect to Hikvision and Dahua, or our other China customers, including changes to the Entity List restrictions, export regulations, tariffs or other trade restrictions, or whether the Chinese government may take any actions in response to U.S. government action that may adversely affect our ability to do business with our China customers. Even in the absence of new restrictions, tariffs or trade actions imposed by the U.S. or Chinese government, our China customers may take actions to reduce dependence on the supply of components subject to U.S. trade regulations, including our SoC solutions, which could have a material adverse effect on our operating results. We are unable to predict the duration of the restrictions imposed by the U.S. government in October 2019 or of any additional governmental actions, any of which could have a long-term adverse effect on our business, operating results and financial condition.

Global economic and political conditions, including possible trade tariffs and trade restrictions, may have an impact on our business and financial condition in ways that we currently cannot predict.

Beyond the BIS actions relating to Hikvision and Dahua, general trade tensions between the United States and China have been escalating, which has, in our view, created and will continue to create an uncertain business environment. For example, BIS has added over 150 entities related to Huawei Technologies Co., Ltd. to the Entity List and created new controls on foreign-produced items when one of these entities is a party to the transaction. If additional tariffs or trade restrictions are imposed on our SoC solutions or the products of our customers, or trade restrictions are imposed on our ability to conduct business with certain customers, there could be a negative impact on our operations and financial performance. For example, H.R. 5515 - John S. McCain National Defense Authorization Act for Fiscal Year 2019 ~~which was recently enacted~~negatively impacts Hikvision and Dahua’s ability to sell products into ~~law, may negatively impact our two largest China IP~~the U.S. security ~~customers~~camera market and could decrease their demand for our solutions. Similarly, changes in export classification requirements, such as those proposed by U.S. Congress, could impact our ability to supply our solutions to certain companies or in certain countries. Even in the absence of new restrictions, tariffs or changes in export classifications, it is possible that foreign customers could take actions to reduce dependence on the supply of components, including our solutions, that could be subject to new export classifications or trade restrictions. ~~For example, there~~There are also risks that the Chinese government may, among other things, require the use of local suppliers, compel companies that do business in China to partner with local companies to conduct business and provide incentives to government-backed local customers to buy from local ~~suppliers, which~~suppliers. The materialization of these risks could have a material adverse effect on our business and financial condition.

We are subject to governmental export and import controls that could subject us to liability or impair our ability to compete in international markets.

The U.S. and various foreign governments have imposed controls, export license requirements and restrictions on the import or export of certain products, technologies and software. We must export our products in compliance with U.S. export controls, including the Commerce’s Export Administration Regulations. We may not always be successful in obtaining necessary export licenses, and our failure to obtain required import or export approval for our products or limitations on our ability to export or sell our products imposed by these laws may harm both our international and domestic sales and adversely affect our revenue. Noncompliance with these laws could have negative consequences, including government investigations, penalties and reputational harm.

Compliance with export and import regulations have not had a significant impact on our business to date, but changes in our products or changes in export, import and economic sanctions laws and regulations may delay our introduction of new products in international markets, prevent our customers from deploying our products internationally or, in some cases, prevent the export or import of our products to or from certain countries altogether. Any change in export or import regulations or legislation, shift or change in enforcement, or change in the countries, persons or technologies targeted by these regulations, could result in decreased use of our products by, or in our decreased ability to export or sell our products to, existing or potential customers with international operations. In such event, our business and results of operations could be adversely affected.

Our primary inventory warehouse is located in Hong Kong and may be affected by recent political, social and economic conditions in Hong Kong.

We operate a warehouse facility in Hong Kong through which the substantial majority of our finished SoCs are shipped to customers or logistic partners. BIS has imposed additional restrictions on exports and reexports of U.S.-controlled items to Hong Kong by removing preferential treatment that Hong Kong used to receive and imposing more stringent licensing requirements similar to those applicable to China. Hong Kong has recently experienced, and continues to experience, significant political unrest and social strife, including protests that resulted in the closing of the Hong Kong international airport on August 12, 2019 for two days. Recently, in response to national security legislation adopted by the Chinese government, the U.S. Secretary of State certified to the U.S. Congress on May 27, 2020 that Hong Kong no longer maintains a sufficient degree of autonomy from China to warrant special treatment by the U.S. While such certification, and subsequent statements made by the U.S. President relating to Hong Kong’s status, do not have an immediate impact on Hong Kong for trade or other purposes, these recent actions represent an escalation in political and trade tensions involving the U.S, China and Hong Kong. It is possible that the U.S. government may take future measures to impose stricter export controls or duties on shipments made to Hong Kong, add additional parties to the Entity List, or reduce preferential treatment currently accorded to Hong Kong, which could harm our business, increase the cost of conducting our operations in Hong Kong or result in retaliatory actions against U.S. interests. While we have not been materially impacted by these problems to date, continued deterioration in political, social or economic conditions in Hong Kong or future unforeseen problems, including health pandemics, could affect deliveries of our SoCs to our customers or logistic partners, possibly resulting in business interruptions, substantially delayed or lost sales, loss of inventory, or increased expenses that cannot be passed on to customers, any of which could ultimately have a material adverse effect on our business and financial results. In such an eventuality, we could be forced to relocate our warehouse operations, either temporarily or permanently, to another potentially costlier location or find alternative potentially costlier methods of shipping our finished SoCs to customers and logistic partners. While we are taking measures to attempt to maintain the continuity of our product delivery operations notwithstanding the impact on the use of our Hong Kong facility of the continued or deteriorating conditions in Hong Kong or other future unforeseen problems there, we cannot ensure that these measures will be successful in eliminating disruptions in our business.

~~If we fail to penetrate new markets, our revenue and financial condition could be harmed.~~

In the past several years, a substantial portion of our revenue was generated from sales of our SoCs to OEMs and ODMs of HD video cameras, including IP security cameras, wearable cameras and UAVs. Our revenue from several of these markets, however, has recently experienced significant declines. As a result, we believe that our future revenue growth, if any, will significantly depend on our ability to expand within the camera markets with our video and image processing SoC solutions, particularly in the professional IP security and home security and monitoring camera markets, as well as emerging markets such as the OEM automotive and robotics markets. Each of these markets presents distinct and substantial risks and, in many cases, requires us to develop new functionality or software to address the particular requirements of that market. For example, computer vision functionality has become an increasingly important requirement in many of our current and future markets, including the automotive, ~~IP security camera~~ and robotics markets. As a result, we believe that our ability to develop advanced computer vision technology and gain customer acceptance of our technology is critical to our future success and our efforts to develop such technology that gains market acceptance may not be successful. Development of products to address new markets, such as the OEM automotive and robotics markets, could negatively impact our ability to develop new products for our current markets, which may harm our financial condition, particularly in the near term. In addition, we anticipate that as we continue to move into new markets, such as the OEM automotive and robotics markets, we will likely face competition from larger competitors with greater resources and more history in these markets. If any of these markets do not develop as we currently anticipate or if we are unable to penetrate them successfully with our solutions, our revenue could decline, and our financial condition will be negatively impacted. Moreover, if we are successful in achieving design wins in these new markets, it will likely take longer to generate revenue from such design wins than in our current markets.

Some of these markets are primarily served by only a few large, multinational OEMs with substantial negotiating power relative to us and, in some instances, with internal solutions that are competitive to our products. Meeting the technical requirements and securing design wins with any of these companies will require a substantial investment of our time and resources. We cannot assure that we will secure design wins from these or other companies or that we will achieve meaningful revenue from the sales of our solutions into these markets. If we fail to penetrate these or other new markets we are targeting, our financial condition would likely suffer.

Our target markets may not grow or develop as we currently expect and are subject to market risks, any of which could harm our business, revenue and operating results.

In the past few years, a substantial portion of our revenue has been derived from sales of our SoCs to the camera market and in particular, the IP security camera market, automotive camera market, wearable camera market and UAV market. While we will continue to provide solutions addressing these markets, weWe are focusing our development resources on addressing computer vision applications, primarily in the professional IP security and home security and monitoring camera markets, the OEM automotive and robotics markets, with our computer vision solutions. The application of computer vision functionality in these markets is relatively new, and we may be unable to predict the timing or development of these markets with accuracy. For example, a slower than expected adoption rate for computer vision technology in the IP security camera market could slow the demand for our new solutions. Similarly, a slower than anticipated adoption of electronic mirrors, advanced driving assistance systems and autonomous driving functionality could reduce demand for our new computer vision solutions. The COVID-19 pandemic has had a negative impact on the global economy and may decrease or delay development of new markets and new programs in emerging markets. If our key target markets, such as automotive cameras, IP security cameras and cameras for robotic applications, do not grow, grow slower, or do not develop in ways that we currently expect, demand for our video and image processing SoCs may not materialize as expected, and our business and operating results could suffer.

Our customers may cancel their orders, change production quantities or delay production. If we fail to accurately forecast demand for our solutions, revenue shortfalls or excess, obsolete or insufficient inventory could result.

Our customers typically do not provide us with firm, long-term purchase commitments. ~~Substantially all~~A substantial majority of our sales are made on a purchase order basis, which permits our customers to cancel, change or delay their product purchase commitments with little or no notice to us and often without penalty to them. Because production lead times often exceed the amount of time required by our customers to fill their orders, we often must build SoCs in advance of receiving orders from customers, relying on an imperfect demand forecast to project volumes and product mix.

Our SoCs are incorporated into products manufactured by or for our end customers, and as a result, demand for our solutions is influenced by the demand for our customers’ products. Our ability to accurately forecast demand can be adversely affected by a number of factors, including inaccurate forecasting by our customers, miscalculations by our customers of their inventory requirements, changes in market conditions including reductions in market activity due to the COVID-19 pandemic, adverse changes in our product order mix and fluctuating demand for our customers’ products. For example, higher than normal customer inventory levels of our products has in the past impacted our revenue and it may occur again. For example, we recently experienced increased demand for our products from Hikvision and Dahua, which may result in higher than normal inventory levels of our products at these customers and result in reduced demand for our products from these customers in future periods as the customers exhaust their inventory. Even after an order is received, our customers may cancel these orders, request a decrease in production quantities or request a delay in the delivery of our solutions. Any such cancellation, decrease or delay subjects us to a number of risks, most notably that our projected sales will not materialize on schedule or at all, leading to unanticipated revenue shortfalls and excess or obsolete inventory that we may be unable to sell to other customers.

Alternatively, if we are unable to project customer requirements accurately, we may not build enough SoCs, which could lead to delays in product shipments and lost sales opportunities in the near term, as well as force our customers to identify alternative sources, which could affect our ongoing relationships with these customers. We have in the past had customers significantly increase their requested production quantities with little or no advance notice. If we do not fulfill customer demands in a timely manner, our customers may cancel their orders and we may be subject to customer claims for cost of replacement. In addition, the rapid pace of innovation in our industry could render portions of our inventory obsolete. Excess or obsolete inventory levels could result in unexpected expenses or increases in our reserves that could adversely affect our business, operating results and financial condition. In addition, any significant future cancellations or deferrals of product orders could harm our margins, increase our write-offs due to product obsolescence and restrict our ability to fund our operations.

We depend on a limited number of customers and end customers for a significant portion of our revenue. If we fail to retain or expand our customer relationships, our revenue could decline.

We derive a significant portion of our revenue from a limited number of ODMs who build products on behalf of a limited number of OEMs and from a limited number of OEMs to whom we ship directly. We anticipate that this customer concentration will continue for the foreseeable future. In fiscal year ~~2019,~~2020, the customers representing 10% or more of our revenue were Wintech Microelectronics Co., Ltd., or Wintech, the Company’s distributor, and Chicony Electronics Co., Ltd., or Chicony, a direct ODM customer, which accounted for approximately ~~58%~~60% and ~~16%~~18% of total revenue, respectively. For the ~~nine~~six months ended ~~October~~July 31, ~~2019,~~2020, the customers representing 10% or more of revenue were Wintech and Chicony which accounted for approximately ~~59%~~60% and ~~18%~~17% of total revenue, respectively. We believe that our operating results for the foreseeable future will continue to depend on sales to a relatively small number of customers and end customers. In the future, these customers may decide not to purchase our SoC solutions at all, may purchase fewer solutions than they did in the past or may alter their purchasing patterns. As substantially all of our sales to date have been made on a purchase order basis, these customers may cancel, change or delay product purchase commitments with little or no notice to us and often without penalty and may make our revenue volatile from period to ~~period. In~~period, which has happened in the past, we have had significant customers decrease their demand for our solutions with little advance notice to us. For example, GoPro, our largest OEM customer in fiscal year 2017, has recently used a competing solution in its mainstream cameras, which had a significantly negative impact on our revenue. Similarly, our customer DJI recently introduced UAVs incorporating competing solutions that have reduced, and will continue to reduce, DJI’s demand for our solutions.past. The loss of a significant customer, or substantial reduction in purchases by a significant customer, could happen again at any time and without notice, and such loss would likely harm our financial condition and results of operations. Moreover, because several of our largest OEM customers have a dominant position in their markets, a loss of a significant customer may not be easily ~~replaced through sales to other customers in that market.~~replaced.

In addition, our relationships with some customers may deter other potential customers who compete with these customers from buying our solutions. To attract new customers or retain existing customers, we may have to offer these customers favorable prices on our solutions. In that event, our average selling prices and gross margins would decline. The loss of a key customer, a reduction in sales to any key customer or our inability to attract new customers could seriously impact our revenue and harm our results of operations.

We do not have long-term supply contracts with our third-party manufacturing vendors, and they may not allocate sufficient capacity to us at reasonable prices to meet future demands for our solutions.

The semiconductor industry is subject to intense competitive pricing pressure from customers and competitors. Accordingly, any increase in the cost of our solutions, whether by adverse purchase price variances or adverse manufacturing cost variances, will reduce our gross margins and operating profit. We currently do not have long-term supply contracts with most of our primary third-party vendors, and we negotiate pricing with our main vendors on a purchase order-by-purchase order basis. Therefore, they are not obligated to perform services or supply product to us for any specific period, in any specific quantities, or at any specific price, except as may be provided in a particular purchase order. The ability of our foundry vendors to provide us with a product, which is solely sourced at each foundry, is limited by their available capacity, existing obligations and technological capabilities. Foundry capacity may not be available when we need it or at reasonable prices. None of our third-party foundry or assembly and test vendors have provided contractual assurances to us that adequate capacity will be available to us to meet our anticipated future demand for our solutions. Moreover, availability of foundry capacity at our primary foundry vendor has tightened recently, which could limit the volume of products we can produce and/or delay production of new products, both of which would negatively impact our business and operations. Our foundry and assembly and test vendors may allocate capacity to the production of other companies’ products while reducing deliveries to us on short notice. In particular, other companies that are larger and better financed than we are or that have long-term agreements with our foundry or assembly and test vendors may cause our foundry or assembly and test vendors to reallocate capacity to them, decreasing the capacity available to us. Converting or transferring manufacturing from a primary location or supplier to a backup provider could be expensive and would likely take at least two or more quarters. There are only a few foundries, including Samsung and Taiwan Semiconductor Manufacturing Co., Ltd., or TSMC, that are currently available for certain advanced process technologies that we utilize or may utilize, such as 10 or 75 nanometer, or nm. Accordingly, as we continue to develop solutions in advanced process nodes, we will be increasingly dependent upon such foundries. The unavailability of one or both of these foundries could significantly impact our ability to produce our new products or delay production, which would negatively impact our business.

If, in the future, we enter into arrangements with suppliers that include additional fees to expedite delivery, nonrefundable deposits or loans in exchange for capacity commitments or commitments to purchase specified quantities over extended periods, such arrangements may be costly, reduce our financial flexibility and be on terms unfavorable to us, if we are able to secure such arrangements at all. ~~Moreover, if we are able to secure foundry capacity, we may be obligated to use all of that capacity or incur penalties. These penalties could harm our financial results.~~ To date, we have not entered into any such arrangements with our suppliers. If we need additional foundry or assembly and test subcontractors because of increased demand or the inability to obtain timely and adequate deliveries from our current vendors, we may not be able to do so cost-effectively, if at all.

If we fail to develop and introduce new or enhanced solutions on a timely basis, our ability to attract and retain customers could be impaired and our competitive position could be harmed.

We operate in a dynamic environment characterized by rapidly changing technologies and technological obsolescence. To compete successfully, we must design, develop, market and sell enhanced solutions that provide increasingly higher levels of performance and functionality and that meet the cost expectations of our customers. Our existing or future solutions could be rendered obsolete by the introduction of new products by our competitors; convergence of other markets with or into the camera market; the market adoption of products based on new or alternative technologies; the emergence of new industry standards for video compression; or the requirement of additional functionality included in video processors, such as ~~analytics or computer vision~~artificial intelligence functionality. In addition, the markets for our solutions are characterized by frequent introduction of next-generation and new products, short product life cycles, increasing demand for added functionality and significant price competition. As we develop and introduce new solutions, we face the risk that customers may not value or be willing to bear the cost of incorporating these newer solutions into their products, particularly if they believe their customers are satisfied with current solutions. Regardless of the improved features or superior performance of the newer solutions, customers may be unwilling to adopt our new solutions due to design or pricing constraints. If we or our customers are unable to manage product transitions in a timely and cost-effective manner, our business and results of operations would suffer.

Our failure to anticipate or timely develop new or enhanced solutions in response to technological shifts could result in decreased revenue and our competitors achieving design wins that we sought. In particular, we may experience difficulties with product design, development of new software, manufacturing, marketing or qualification that could delay or prevent our development, introduction or marketing of new or enhanced solutions. In addition, for some markets, such as the automotive OEM market, we expect that we will need to establish relationships with third-party suppliers or software providers in order to effectively market our solutions to end-customers. Failure to establish these relationships could harm our ability to achieve design wins. Delays in product development could impair our relationships with our customers and negatively impact sales of our solutions under development. ~~Moreover, it is possible that our customers may develop their own product or adopt a competitor’s solution for products that they currently buy from us.~~ If we fail to introduce new or enhanced solutions that meet the needs of our customers or penetrate new markets in a timely fashion, we will lose market share, and our operating results will be adversely affected.

Achieving design wins is subject to lengthy competitive selection processes that require us to incur significant costs. Even if we begin a product design, a customer may decide to cancel or change its product plans, resulting in no revenue from such expenditures.

We are focused on selling our video and image processing solutions to ODMs and OEMs for incorporation into their products at the design stage. These efforts to achieve design wins typically are lengthy, especially in emerging markets ~~we intend to address~~ such as the OEM automotive market, and in any case can require us to both incur design and development costs and dedicate scarce engineering resources in pursuit of a single customer opportunity. We may not prevail in the competitive selection process, and even when we do achieve a design win, we may never generate any revenue despite incurring development expenditures. For example, in the past we had achieved certain design wins and projected substantial future revenue as a result of such design wins. Subsequently, based on factors outside of our control, the applicable end customers abruptly cancelled the projects, with no notice to us, resulting in a loss of projected revenue. In addition, even if an OEM designs one of our SoC solutions into one of its products, we cannot be assured that we will secure new design wins from that OEM for future products. ~~For example, GoPro and DJI have used competing solutions in recently introduced camera products, which has had a significant negative impact on our revenue.~~

~~These risks are exacerbated by the fact that some of our end customers’ products, particularly in the camera market, likely will have short life cycles.~~ Further, even after securing a design win, we have experienced and may again experience delays in generating revenue from our solutions as a result of the lengthy product development cycle typically required, if we generate any revenue at all as a result of any such design win.

Our customers generally take a considerable amount of time to evaluate our solutions. The typical time from early engagement by our sales force to actual product introduction runs from nine to 12 months, though it will likely take significantly longer in new markets such as the OEM automotive and robotics markets. The delays inherent in these lengthy sales cycles increase the risk that a customer will decide to cancel, curtail, reduce or delay its product plans, causing us to lose anticipated sales. In addition, any delay or cancellation of a customer’s plans could harm our financial results, as we may have incurred significant expense and generated no revenue. ~~Finally, our customers’ failure to successfully market and sell their products could reduce demand for our SoC solutions and harm our business, financial condition and results of operations.~~ If we were unable to generate revenue after incurring substantial expenses to develop any of our solutions, our business would suffer.

We expect competition to increase in the future, which could have an adverse effect on our revenue and market share.

The global semiconductor market in general, and the video and image processing markets in particular, are highly competitive. We compete in different target markets to various degrees on the basis of a number of competitive factors, including our solutions’ performance, features, ~~functionality,~~ energy efficiency, size, ease with which our solution may be integrated into our customers’ products, customer support, reliability and price, as well as on the basis of our reputation. We expect competition to increase and intensify as more and larger semiconductor companies enter our markets and as existing competitors improve or expand their product offerings. We also expect that the trend among large OEMs to seek to develop their own semiconductor solutions will continue and expand, particularly in camera markets experiencing consolidation, such as the IP security market. In addition, ~~as we move into new~~in our newer markets, such as the OEM automotive and robotics markets, we will face competition from larger competitors with longer histories in these markets. Increased competition could result in price pressure, reduced profitability and loss of market share, any of which could harm our business, revenue and operating results.

Our competitors range from large, international companies offering a wide range of semiconductor products to smaller companies specializing in narrow markets. In the IP security camera market, our primary competitors include AMLogic Inc., Fullhan Microelectronics Co., Ltd., Geo Semiconductor, Inc., HiSilicon Technologies Co., Ltd., or HiSilicon, which is owned by Huawei Technologies Co., Ingenic Semiconductor Co., Ltd., Intel Corporation, or Intel, Movidius Ltd., a subsidiary of Intel, Novatek Microelectronics Corp., or Novatek, OmniVision Technologies, Inc., or OmniVision, Qualcomm Incorporated, or Qualcomm, Realtek Semiconductor Corp., SigmaStar Technology Corp., or SigmaStar, Socionext Inc., or Socionext, an entity created from the merger of the system LSI businesses of Fujitsu Ltd. and Panasonic Corporation, or Panasonic, and Texas Instruments Incorporated, or Texas Instruments, as well as vertically integrated divisions of IP Security camera device OEMs, including Axis Communications AB, Hanwha Techwin, and Sony Corporation, or Sony. In the automotive camera market, we currently compete against Allwinner Technology Co., Ltd., Alpha Imaging Technology Corp., Core Logic, Inc., Mobileye, an Intel company, Novatek, NXP Semiconductors N.V., OmniVision, Qualcomm, Renesas Electronics Corporation, SigmaStar, Sunplus Technology Co. Ltd., Texas Instruments and Xilinx Inc. In the wearable sports camera market, our primary competitors are vertically integrated divisions of camera device OEMs, including Sony, Panasonic, HiSilicon and Socionext. Our primary competitors in the ~~UAV~~drone camera market include HiSilicon, Intel, NVIDIA Corporation and Qualcomm.

Certain of our customers and suppliers also have divisions that produce products competitive with ours and other customers may seek to vertically integrate competitive solutions in the future. In addition, certain third-party developers of technology competitive to our solutions have licensed their technology, including image signal processing and computer vision IP, which potentially enables a greater number of competitors to offer competitive solutions.

Our ability to compete successfully depends on elements both within and outside of our ~~control, including industry and general economic trends.~~control. Many of our competitors are substantially larger, have greater financial, technical, marketing, distribution, customer support and other resources, are more established than we are and have significantly better brand recognition and broader product offerings than us, which may enable them to develop and enable new technology into product solutions better or faster than us and to better withstand adverse economic or market conditions in the future. Our ability to compete will depend on a number of factors, including:

Our competitors may also establish cooperative relationships among themselves or with third parties or acquire companies that provide similar products to ours. As a result, new competitors or alliances may emerge that could acquire significant market share. Any of these factors, alone or in combination with others, could harm our business and result in a loss of market share and an increase in pricing pressure.

Fluctuations in our operating results on a quarterly and annual basis could cause the market price of our ordinary shares to decline.

Our revenue and operating results have fluctuated significantly from period to period in the past and are likely to do so in the future. In particular, our business has tended to be seasonal with higher revenue in our third quarter as our customers typically increase their production to meet holiday shopping season or year-end demand for their products. We also may experience seasonally lower demand in our first quarter ~~in the Asia-based portion of the IP security camera market~~ as a result of industry seasonality and the impact of ODM and OEM factory closures associated with the Chinese New Year holiday. As a result, you should not rely on period-to-period comparisons of our operating results as an indication of our future performance. In future periods, our revenue and results of operations may be below the expectations of analysts and investors, which could cause the market price of our ordinary shares to decline.

Moreover, the semiconductor industry has historically been cyclical in nature, reflecting overall economic conditions as well as budgeting and buying patterns of consumers. We expect these cyclical conditions to continue. As a result, our quarterly operating results are difficult to predict, even in the near term. Our expense levels are relatively fixed in the short term and are based, in part, on our expectations of future revenue. If revenue levels are below our expectations, we may experience material adverse impacts on our business, including declines in margins and profitability, or incur losses. For example, our revenue declined 23% in fiscal year 2019 compared to fiscal year 2018, and we incurred our first annual net losses since our initial public offering, or IPO, in 2012. For the ~~nine~~twelve months ended ~~October~~January 31, ~~2019,~~2020, our revenue ~~declined 3%~~increased by 0.4% compared to the same period in fiscal year 2019, and we incurred a net loss of ~~$31.8~~$44.8 million. For the six months ended July 31, 2020, our revenue increased by 1.1% compared to the same period in fiscal year 2020, and we incurred a net loss of $30.2 million. We may experience similar fluctuations or declines in revenue or net losses in the future, which would harm our operating results.

While we intend to continue to invest in research and development, we may be unable to make the substantial investments that are required to remain competitive in our business.

The semiconductor industry requires substantial investment in research and development in order to bring to market new and enhanced solutions. Our research and development expense was $129.7 million, $128.1 million and $115.5 million in fiscal years 2020, 2019 and 2018, respectively. For the six months ended July 31, 2020, our research and development expense was $67.0 million. We expect to increase our research and development expenditures as compared to prior periods as part of our strategy of focusing on the development of innovative video and image processing solutions with increased functionality, such as computer vision capabilities, and as we target new markets, such as the automotive OEM and robotics markets. We are unable to predict whether we will have sufficient resources to achieve the level of investment in research and development required to remain competitive. For example, development in the latest process nodes, such as 10nm and 5nm, can cost significantly more than required to develop in larger process nodes, such as 28nm or 14nm. This added cost could prevent us from being able to maintain a technology advantage over larger competitors that have significantly more resources to invest in research and development. In addition, we cannot assure you that the technologies which are the focus of our research and development expenditures will become commercially successful or generate any revenue.

The average selling prices of video and image processing solutions in our target markets have historically decreased over time and will likely do so in the future, which could harm our revenue and gross margins.

Average selling prices of semiconductor products in the markets we serve have historically decreased over time, and we expect such declines to continue to occur for our solutions over time. Our gross margins and financial results will suffer if we are unable to offset reductions in our average selling prices by reducing our costs, developing new or enhanced SoC solutions on a timely basis with higher selling prices or gross margins, or increasing our sales volumes. Additionally, because we do not operate our own manufacturing, assembly or testing facilities, we may not be able to reduce our costs as rapidly as companies that operate their own facilities, and our costs may even increase, which could also reduce our gross margins. In the past, we have reduced the prices of our SoC solutions in anticipation of future competitive pricing pressures, new product introductions by us or our competitors and other factors. Recently, we have experienced competitive pricing pressures at the low ends of the automotive aftermarket camera market and China-based IP security camera market. We expect that we will have to address pricing pressures again in the future, particularly in markets experiencing consolidation, which could require us to reduce the prices of our SoC solutions and harm our operating results.

If we do not generate revenue growth, we may not be able to execute our business plan and our operating results could suffer.

You should not rely on our revenue, gross margins or operating results for any prior quarterly or annual periods as an indication of our future operating performance. In years past, we experienced significant growth in a short period of time. Our revenue increased from $21.5 million in fiscal year 2008 to $316.4 million in fiscal year 2016. Recently, however, we have not sustained this growth rate. Our revenue decreased to $295.4 million in fiscal year 2018 and to $227.8 million in fiscal year 2019, resulting in the first annual net losses since our IPO in 2012. In fiscal year 2020, our revenue increased by 0.4% compared to fiscal year 2019. For the six months ended July 31, 2020, our revenue increased by 1.1% compared to the same period in fiscal year 2020, and we incurred a net loss of $30.2 million. We continue to invest in the development of new technology and solutions and expect our research and development expenditures to increase compared to prior periods. Accordingly, if we are unable to generate or maintain adequate revenue growth, our financial results could suffer and our stock price could decline.

If we are unable to manage any future growth, we may not be able to execute our business plan and our operating results could suffer.

Our business has grown rapidly in the past. Our future operating results depend to a large extent on our ability to successfully manage any expansion and growth, including the challenges of managing a company with an executive management team in the United States and the majority of its employees in Asia. We are ~~dependent~~increasing our investment in research and development and other functions to grow our business and address new markets, such as the OEM automotive and robotics markets. To manage our growth successfully and handle the responsibilities of being a public company, we believe we must effectively, among other things:

We are likely to incur the costs associated with these increased investments earlier than some of the anticipated benefits, and the return on ~~sales~~these investments, if any, may be lower, may develop more slowly than we expect or may not materialize. In addition, development of ~~a limited number~~products to address emerging markets, such as the OEM automotive and robotics markets, could negatively impact our ability to develop new products for our current markets, which may harm our financial condition, particularly in the near term.

If we are unable to manage growth effectively, we may not be able to take advantage of ~~video and image processing~~market opportunities or develop new solutions, and ~~a decline in market adoption of these solutions could harm~~we may fail to satisfy customer product or support requirements, maintain product quality, execute our ~~business.~~business plan or respond to competitive pressures.

We ~~currently derive substantially all~~may have difficulty accurately predicting our future revenue and appropriately budgeting our expenses.

The rapidly evolving nature of the markets in which we sell our solutions, combined with substantial uncertainty concerning how these markets may develop, the considerable amount of time our customers generally take to evaluate our solutions, and other factors beyond our control, limits our ability to accurately forecast quarterly or annual revenue. We continue to expand our staffing and increase our expenditures in anticipation of future revenue growth. If our revenue ~~from the sale of a relatively small number of~~does not increase as anticipated, we could incur significant losses due to our ~~video and image processing SoCs for use~~higher expense levels if we are not able to decrease our expenses in a ~~relatively small number of camera markets and we expect~~timely manner to ~~do so for the next several years. As a result, continued market adoption of our SoC solutions~~offset any shortfall in ~~these camera markets is critical to our~~ future success. If demand for our SoC solutions were to decline, or demand for products incorporating our solutions declines, or does not grow as expected, our revenue would decline and our business would be harmed.revenue.

A substantial portion of our revenue is processed through a single distributor and the loss of this distributor may cause disruptions in our shipments, which may adversely affect our operations and financial condition.

We sell a significant percentage of our solutions through a single distributor, Wintech Microelectronics Co., Ltd., or Wintech, which serves as our non-exclusive sales representative in Asia, other than Japan. Approximately ~~58%~~60%, ~~59%~~58% and ~~60%~~59% of our revenue was derived from sales through Wintech for the fiscal years ended January 31, 2020, 2019 ~~2018~~ and ~~2017,~~2018, respectively, and approximately ~~59%~~60% of our revenue was derived from sales through Wintech for the ~~nine~~six months ended ~~October~~July 31, ~~2019.~~2020. We anticipate that a significant portion of our revenue will continue to be derived from sales through Wintech in the foreseeable future. In November 2019, WPG Holdings Co., or WPG, a Taiwan distributor, announced an unsolicited bid to acquire up to 30% of Wintech. While the outcome of ~~WGP’s~~WPG’s bid is unknown at this time, an acquisition of Wintech by WPG could have an adverse impact on our relationship with Wintech. Our current agreement with Wintech is effective until September 2022, unless it is terminated earlier by either party for any or no reason with 60 days written notice or by failure of the breaching party to cure a material breach within 30 days following written notice of such material breach by the non-breaching party. Our agreement with Wintech will automatically renew for additional successive 12-month terms unless at least 60 days before the end of the then-current term either party provides written notice to the other party that it elects not to renew the agreement. Termination of the relationship with Wintech, either by us or by Wintech, could result in a temporary or permanent loss of revenue. We may not be successful in finding suitable alternative distributors on satisfactory terms, or at all, and this could adversely affect our ability to effectively sell our solutions in certain geographical locations or to certain end customers. Furthermore, Wintech, or any successor or other distributors we do business with, may face issues obtaining credit, which could impair their ability to make timely payments to us.

We sell many of our products to customers through distributors who maintain their own inventory of our products for sale to ODMs and end customers. We allow limited price adjustments on sales to distributors. Price adjustments may be effected by way of credits for future product or by cash payments to the distributor, either in arrears or in advance, using estimates based on historical transactions. Upon the adoption of ASC 606 on February 1, 2018, we recognize revenue on sales to distributors upon shipment and transfer of control (known as “sell-in” revenue recognition) based on the amount of consideration expected to be received. To the extent that the actual consideration received is materially different from estimated variable consideration recognized, we may be required to adjust revenue in subsequent periods.

If our distributors are unable to sell an adequate amount of their inventory of our products in a given quarter to ODMs and end customers, or if they decide to decrease their inventories for any reason, such as adverse global economic conditions or a downturn in technology spending, our sales to these distributors and our revenues may decline. We also face the risk that our distributors may purchase, or for other reasons accumulate, inventory levels of our products in any particular quarter in excess of future anticipated sales to end customers. If such sales do not occur in the time frame anticipated by these distributors for any reason, these distributors may substantially decrease the amount of product they order from us in subsequent periods until their inventory levels realign with end-customer demand, which would harm our business and could adversely affect our revenues in such subsequent periods. Our reserve estimates associated with products stocked by our distributors are based largely on reports that our distributors provide to us on a weekly or monthly basis. To date, we believe this resale and channel inventory data have been generally accurate. To the extent that these data are inaccurate or not received in a timely manner, we may not be able to make reserve estimates for future periods accurately or at all.

Deterioration of the financial conditions of our customers could adversely affect our operating results.

Deterioration of the financial condition of our distributors or customers could adversely impact our collection of accounts receivable. We regularly review the collectability and creditworthiness of our distributors and customers to determine an appropriate allowance for doubtful receivables. Based on our review of our distributors and customers, we currently have only immaterial reserves for uncollectible accounts. If our uncollectible accounts, however, were to exceed our current or future allowance for doubtful receivables, our operating results would be negatively impacted.

We believe our future success depends in large part upon the continuing services of the members of our senior management team and various engineering and other technical personnel. If one or more of our senior executives or other key personnel are unable or unwilling to continue in their present positions, we may not be able to replace them easily or at all, our business may be disrupted, and our financial condition and results of operations may be materially and adversely affected. In addition, if any member of our senior management team or any of our other key personnel joins a competitor or forms a competing company, we may experience material disruption of our operations and development plans and lose customers, know-how and key professionals and staff members, and we may incur increased operating expenses as the attention of other senior executives is diverted to recruit replacements for key personnel.

We rely on highly skilled personnel and, if we are unable to hire, retain or motivate key personnel, we may not be able to grow effectively.

Our performance largely depends on the talents and efforts of highly skilled individuals. Our future success depends on our continuing ability to identify, hire, develop, motivate, and retain highly skilled personnel for all areas of our organization. Our industry is characterized by high demand and intense competition for talent. The pool of qualified candidates is limited, particularly in Silicon Valley and parts of Asia for very-large-scale integration, or VLSI, and artificial intelligence and computer vision engineers, and certain of our competitors and potential competitors with greater resources have directly targeted our employees. In addition, our compensation arrangements, such as our equity award programs, may not always be successful in attracting new employees and retaining and motivating our existing employees. Our continued ability to compete effectively, and to grow our business, depends on our ability to attract new employees and to retain and motivate our existing employees.

~~If we do not generate revenue growth, we may not be able to execute our business plan and our operating results could suffer.~~

You should not rely on our revenue growth, gross margins or operating results for any prior quarterly or annual periods as an indication of our future operating performance. In the past, we experienced significant growth in a short period of time. Our revenue increased from $21.5 million in fiscal year 2008 to $316.4 million in fiscal year 2016. Recently, however, we have not sustained this growth rate. Our revenue decreased to $295.4 million in fiscal year 2018 and to $227.8 million in fiscal year 2019, resulting in the first annual net losses since our IPO in 2012. For the nine months ended October 31, 2019, our revenue declined 3% comparedWe are subject to the same period in fiscal year 2019 and we incurred net loss of $31.8 million. We continue to invest in the development of new technology and solutions and expect our research and development expenditures to increase compared to prior periods. Accordingly, if we are unable to generate or maintain adequate revenue growth, our financial results could suffer and our stock price could decline.

~~If we are unable to manage any future growth, we may not be able to execute our business plan and our operating results could suffer.~~

Our business has grown rapidly in the past. Our future operating results depend to a large extent on our ability to successfully manage any expansion and growth, including the challenges of managing a company with an executive management team in the United States and the majority of its employees in Asia. We are increasing our investment in research and development and other functions to grow our business and address new markets, such as the OEM automotive and robotics markets. To manage our growth successfully and handle the responsibilities of being a public company, we believe we must effectively, among other things:

~~We are likely to incur the costs associated with these increased investments earlier than some~~cyclical nature of the anticipated benefits, and the return on these investments, if any, may be lower, may develop more slowly than we expect or may not materialize. In addition, development of products to address emerging markets, such as the OEM automotive and robotics markets, could negatively impact our ability to develop new products for our current markets, which may harm our financial condition, particularly in the near term.

If we are unable to manage growth effectively, we may not be able to take advantage of market opportunities or develop new solutions, and we may fail to satisfy customer product or support requirements, maintain product quality, execute our business plan or respond to competitive pressures.

~~While we intend to continue to invest in research and development, we may be unable to make the substantial investments that are required to remain competitive in our business.~~semiconductor industry.

The semiconductor industry ~~requires substantial investment~~is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence, price erosion, evolving standards, short product life cycles and wide fluctuations in ~~research~~product supply and ~~development~~demand. The industry experienced a significant downturn during the 2008-2009 global recession and the economic impact of the COVID-19 pandemic could lead to a similar downturn in ~~order~~future periods. These downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of average selling prices. Any future downturns could harm our business and operating results. Furthermore, any significant upturn in the semiconductor industry could result in increased competition for access to ~~bring~~third-party foundry and assembly capacity. We are dependent on the availability of this capacity to ~~market new~~manufacture and ~~enhanced~~assemble our SoC solutions. Our research and development expense was $128.1 million, $115.5 million and $101.2 million in fiscal years 2019, 2018 and 2017, respectively. For the nine months ended October 31, 2019, our research and development expense was $95.9 million. We expect to increase our research and development expenditures as compared to prior periods as partNone of our strategy of focusing on the development of innovative video and image processing solutions with increased functionality, such as computer vision capabilities, and as we target new markets, such as the automotive OEM and robotics markets. We are unablethird-party foundry or assembly contractors has provided assurances that adequate capacity will be available to ~~predict whether we will have sufficient resources to maintain the level of investment in research and development required to remain competitive. For example, development~~us in the latest process nodes, such as 10nm and 7nm, can cost significantly more than required to develop in larger process nodes, such as 28nm. This added cost could prevent us from being able to maintain a technology advantage over larger competitors that have significantly more resources to invest in research and development. In addition, we cannot assure you that the technologies which are the focus of our research and development expenditures will become commercially successful or generate any revenue.future.

~~We may have difficulty accurately predicting our future revenue and appropriately budgeting our expenses.~~

The rapidly evolving nature of the markets in which we sell our solutions, combined with substantial uncertainty concerning how these markets may develop and other factors beyond our control, limits our ability to accurately forecast quarterly or annual revenue. We continue to expand our staffing and increase our expenditures in anticipation of future revenue growth. If our revenue does not increase as anticipated, we could incur significant losses due to our higher expense levels if we are not able to decrease our expenses in a timely manner to offset any shortfall in future revenue.44

We may experience difficulties demonstrating the value to customers of newer, higher priced and higher margin solutions if they believe existing solutions are adequate to meet end customer expectations.

As we develop and introduce new solutions, we face the risk that customers may not value or be willing to bear the cost of incorporating these newer solutions into their products, particularly if they believe their customers are satisfied with current solutions. Regardless of the improved features or superior performance of the newer solutions, customers may be unwilling to adopt our new solutions due to design or pricing constraints. Owing to the extensive time and resources that we invest in developing new solutions, if we are unable to sell customers new generations of our solutions, or if we face pricing pressures on our new solutions, our revenue could decline and our business, financial condition, operating results and cash flows could be negatively affected.

The complexity of our solutions could result in unforeseen delays or expenses from undetected defects, errors or bugs in hardware or software which could reduce the market adoption of our new solutions, damage our reputation with current or prospective customers and adversely affect our operating costs.

Highly complex SoC solutions such as ours frequently contain defects, errors and bugs when they are first introduced or as new versions are released. We have in the past and may in the future experience these defects, errors and bugs. If any of our solutions have reliability, quality or compatibility problems, we may not be able to successfully correct these problems in a timely manner or at all. In addition, if any of our proprietary features contain defects, errors or bugs when first introduced or as new versions of our solutions are released, we may be unable to timely correct these problems. Consequently, our reputation may be damaged and customers may be reluctant to buy our solutions, which could harm our ability to retain existing customers and attract new customers, and could adversely affect our financial results. In addition, these defects, errors or bugs could interrupt or delay sales to our customers. If any of these problems are not found until after we have commenced commercial production of a new product, we may incur significant additional development costs and product recall, repair or replacement costs. These problems may also result in claims against us by our customers or others.

Camera manufacturers incorporate components supplied by multiple third parties, and a supply shortage or delay in delivery of these components could delay orders for our solutions by our customers.

Our customers purchase components used in the manufacture of their cameras from various sources of supply, often involving several specialized components, including lenses, sensors, and memory chips. Any supply shortage or delay in delivery by third-party component suppliers, or a third-party supplier’s cessation or shut down of its business, may prevent or delay production of our customers’ products. ~~In addition, replacement or substitute components may not be available on commercially reasonable terms, or at all.~~ As a result of delays in delivery or supply shortages of third-party components, orders for our solutions may be delayed or canceled and our business may be harmed. For example, a disruption in the availability of image sensors from Sony Corporation as a result of the April 14, 2016 Kumamoto, Japan earthquake impacted our customers’ ability to build or launch cameras and, as a result, negatively impacted the timing and scope of demand for our SoCs in the second and third quarters of fiscal year 2017. Similarly, our ability to generate design wins in some markets, such as the automotive OEM market, requires us to collaborate with third-party software suppliers in order to offer a complete solution to customers. Our inability to successfully collaborate with such third-party suppliers, or such suppliers’ inability to develop and deliver software, could harm our ability to achieve design wins and harm our business. Errors or defects within a camera system or in the manner in which the various components interact could prevent or delay production of our customers’ products, which could harm our business.

We outsource our wafer fabrication, assembly and testing operations to third parties, and if these parties fail to produce and deliver our products according to requested demands in specification, quantity, cost and time, our reputation, customer relationships and operating results could suffer.

We rely on third parties for substantially all of our manufacturing operations, including wafer fabrication, assembly and testing. Currently, the majority of our SoCs are supplied by Samsung in facilities located in Austin, Texas and South Korea, from whom we have the option to purchase both fully assembled and tested products as well as tested die in wafer form for assembly. Samsung subcontracts the assembly and initial testing of the assembled chips it supplies to us to Signetics Corporation and STATS ChipPAC Ltd. In the case of purchases of tested die from Samsung, we contract the assembly to Advanced Semiconductor Engineering, Inc., or ASE. We also have products supplied by Global UniChip Corporation, or GUC, in Taiwan, from whom we purchase fully assembled and tested products. The wafers used by GUC in the assembly of our products are manufactured by TSMC in Taiwan. The assembly is done by GUC subcontracted assembly suppliers ASE, and Powertech Technology Inc, or PTI. Final testing of all of our products is handled by King Yuan Electronics Co., Ltd. or Sigurd Corporation under the supervision of our engineers. We depend on these third parties to supply us with material of a requested quantity in a timely manner that meets our standards for yield, cost and manufacturing quality. Availability of capacity within our supply chain has tightened recently, which could limit the volume of products we can produce and negatively impact our business and operations. We do not have any long-term supply agreements with any of our manufacturing suppliers. If one or more of these vendors terminates its relationship with us, or if we encounter any problems with our manufacturing supply chain, including available capacity constraints, our ability to ship our solutions to our customers on time and in the quantity required would be adversely affected, which in turn could cause an unanticipated decline in our sales and damage our customer relationships.

If our foundry vendors do not achieve satisfactory yields or quality, our reputation and customer relationships could be harmed.

The fabrication of our video and image processing SoC solutions is a complex and technically demanding process. Minor deviations in the manufacturing process can cause substantial decreases in yields, and in some cases, cause production to be suspended. Our foundry vendors, from time to time, experience manufacturing defects and reduced manufacturing yields, including in the fabrication of our SoCs. Changes in manufacturing processes or the inadvertent use of defective or contaminated materials by our foundry vendors could result in lower than anticipated manufacturing yields or unacceptable performance of our SoCs. Many of these problems are difficult to detect at an early stage of the manufacturing process and may be time consuming and expensive to correct. Poor yields from our foundry vendors, or defects, integration issues or other performance problems in our solutions, could cause us significant customer relations and business reputation problems, harm our financial results and give rise to financial or other damages to our customers. Our customers might consequently seek damages from us for their losses. A product liability claim brought against us, even if unsuccessful, would likely be time consuming and costly to defend.

Each of our SoC solutions is manufactured at a single location. If we experience manufacturing problems at a particular location, we would be required to transfer manufacturing to a new location or supplier. Converting or transferring manufacturing from a primary location or supplier to a backup fabrication facility could be expensive and could take two or more quarters. During such a transition, we would be required to meet customer demand from our then-existing inventory, as well as any partially finished goods that could be modified to the required product specifications. We do not seek to maintain sufficient inventory to address a lengthy transition period because we believe it is uneconomical to keep more than minimal inventory on hand. As a result, we may not be able to meet customer needs during such a transition, which could delay shipments, cause production delays, result in a decline in our sales and damage our customer relationships.

We may experience difficulties in transitioning to new wafer fabrication process technologies or in achieving higher levels of design integration, which may result in reduced manufacturing yields, delays in product deliveries and increased costs.

We aim to use the most advanced manufacturing process technology appropriate for our products that is available from our third-party foundries. As a result, we periodically evaluate the benefits of migrating our solutions to smaller geometry process technologies in order to improve performance and reduce costs. We believe this strategy will help us remain competitive. ~~These ongoing efforts require us from time to time to modify the manufacturing processes for our products and to redesign some products, which in turn may result in delays in product deliveries.~~ We may face difficulties, delays and increased expense as we transition our products to new processes, such as the ~~7nm~~5nm process node, and potentially to new foundries. We depend on Samsung and TSMC, as the principal foundries for our products, to transition to new processes successfully. We cannot assure you that Samsung or TSMC will be able to effectively manage such transitions or that we will be able to maintain our relationship with Samsung or TSMC or develop relationships with new foundries. Moreover, as we utilize more advanced process nodes beyond 10nm, we are increasingly dependent upon Samsung and TSMC, who are the only foundries currently available for certain advanced process technologies. If we or our foundry vendors experience significant delays in transitioning to smaller geometries or fail to efficiently implement transitions, we could experience reduced manufacturing yields, delays in product deliveries and increased costs, all of which could harm our relationships with our customers and our operating results. As new processes become more prevalent, we expect to continue to integrate greater levels of functionality, as well as more end-customer and third-party intellectual property, into our solutions. We may not be able to achieve higher levels of design integration or deliver new integrated solutions on a timely basis.

We rely on third-party vendors to supply software development tools to us for the development of our new products, and we may be unable to obtain the tools necessary to develop or enhance new or existing products.

We rely on third-party software development tools to assist us in the design, simulation and verification of new products or product enhancements. To bring new products or product enhancements to market in a timely manner, or at all, we need software development tools that are sophisticated enough or technologically advanced enough to complete our design, simulations and verifications. In the future, the design requirements necessary to meet consumer demands for more features and greater functionality from our solutions may exceed the capabilities of available software development tools. Unavailability of software development tools may result in our missing design cycles or losing design wins, either of which could result in a loss of market share or negatively impact our operating results.

Because of the importance of software development tools to the development and enhancement of our solutions, our relationships with leaders in the computer-aided design industry, including Cadence Design Systems, Inc., Mentor Graphics Corporation and Synopsys, Inc., are critical to us. We have invested significant resources to develop relationships with these industry leaders. We believe that utilizing next-generation development tools to design, simulate and verify our products will help us remain at the forefront of the video compression market, and develop solutions that utilize leading-edge technology on a rapid basis. If these relationships are not successful, we may be unable to develop new products or product enhancements in a timely manner, which could result in a loss of market share, a decrease in revenue or negatively impact our operating results.

Our failure to adequately protect our intellectual property rights could impair our ability to compete effectively or defend ourselves from litigation, which could harm our business, financial condition and results of operations.

Our success depends, in part, on our ability to protect our intellectual property. We rely primarily on patent, copyright, trademark and trade secret laws, as well as confidentiality and non-disclosure agreements and other contractual protections, to protect our proprietary technologies and know-how, all of which offer only limited protection. The steps we have taken to protect our intellectual property rights may not be adequate to prevent misappropriation of our proprietary information or infringement of our intellectual property rights, and our ability to prevent such misappropriation or infringement is uncertain, particularly in countries outside of the United States. The failure of our patents to adequately protect our technology might make it easier for our competitors to offer similar products or technologies, which would harm our business. For example, our patents and patent applications could be opposed, contested, circumvented, designed around by our competitors or be declared invalid or unenforceable in judicial or administrative proceedings. Our foreign patent protection is generally not as comprehensive as our U.S. patent protection and may not protect our intellectual property in some countries where our products are sold or may be sold in the future. Many U.S.-based companies have encountered substantial intellectual property infringement in foreign countries, including countries where we sell products. Even if foreign patents are granted, effective enforcement in foreign countries may not be available. For example, the legal environment relating to intellectual property protection in certain emerging market countries where we operate is relatively weaker, often making it difficult to create and enforce such rights. We may not be able to effectively protect our intellectual property rights in these emerging markets or elsewhere. If such an impermissible use of our intellectual property or trade secrets were to occur, our ability to sell our solutions at competitive prices may be adversely affected and our business, financial condition, operating results and cash flows could be materially and adversely affected.

The legal standards relating to the validity, enforceability and scope of protection of intellectual property rights are uncertain and evolving. We cannot assure you that others will not develop or patent similar or superior technologies, products or services, or that our patents, trademarks and other intellectual property will not be challenged, invalidated or circumvented by others.

Unauthorized copying or other misappropriation of our proprietary technologies could enable third parties to benefit from our technologies without paying us for doing so, which could harm our business. Monitoring unauthorized use of our intellectual property is difficult and costly. Although we are not aware of any unauthorized use of our intellectual property in the past, it is possible that unauthorized use of our intellectual property may have occurred or may occur without our knowledge. We cannot assure you that the steps we have taken will prevent unauthorized use of our intellectual property. Our failure to effectively protect our intellectual property could reduce the value of our technology in licensing arrangements or in cross-licensing negotiations.

We may in the future need to initiate infringement claims or litigation in order to try to protect our intellectual property rights. Litigation, whether we are a plaintiff or a defendant, can be expensive, time-consuming and may divert the efforts of our technical staff and management, which could harm our business, whether or not such litigation results in a determination favorable to us. Litigation also puts our patents at risk of being invalidated or interpreted narrowly and our patent applications at risk of not being issued. Additionally, any enforcement of our patents or other intellectual property may provoke third parties to assert counterclaims against us. If we are unable to protect our proprietary rights or if third parties independently develop or gain access to our or similar technologies, our business, revenue, reputation and competitive position could be harmed.

Third parties’ assertions of infringement of their intellectual property rights could result in our having to incur significant costs and cause our operating results to suffer.

The semiconductor industry is characterized by vigorous protection and pursuit of intellectual property rights and positions, which has resulted in protracted and expensive litigation for many companies. Certain of our customers have received, and we expect, particularly to the extent we gain greater market visibility, that in the future we may receive, communications from others alleging our infringement of their patents, trade secrets or other intellectual property rights. In addition, certain of our end customers have been the subject of lawsuits alleging infringement of intellectual property rights by products incorporating our solutions, including the assertion that the alleged infringement may be attributable, at least in part, to our technology. Lawsuits resulting from such allegations could subject us to significant liability for damages and invalidate our proprietary rights, though this has not occurred to date. Any potential intellectual property litigation also could force us to do one or more of the following:

Any significant impairment of our intellectual property rights from any litigation we face could harm our business and our ability to compete.

Any potential dispute involving our patents or other intellectual property could affect our customers, which could trigger our indemnification obligations to them and result in substantial expense to us.

In any potential dispute involving our patents or other intellectual property, our customers could also become the target of litigation. Certain of our customers have received notices from third parties claiming to have patent rights in certain technology and inviting our customers to license this technology, and certain of our end customers have been the subject of lawsuits alleging infringement of patents by products incorporating our solutions, including the assertion that the alleged infringement may be attributable, at least in part, to our technology. Because we generally indemnify our customers for intellectual property claims made against them for products incorporating our technology, any litigation could trigger technical support and indemnification obligations under some of our license agreements, which could result in substantial expense to us. Although we have not incurred significant indemnity expenses related to intellectual property claims to date, we anticipate that we will receive requests for indemnity in the future pursuant to our license agreements with our customers. In addition, other customers or end customers with whom we do not have formal agreements requiring us to indemnify them may ask us to indemnify them if a claim is made as a condition to awarding future design wins to us. Because some of our ODMs and OEMs are larger than we are and have greater resources than we do, they may be more likely to be the target of an infringement claim by third parties than we would be, which could increase our chances of becoming involved in a future lawsuit. ~~Although we have not yet been subject to such claims, if~~If any such claims were to succeed, we might be forced to pay damages on behalf of our ODMs or OEMs that could increase our expenses, disrupt our ability to sell our solutions and reduce our revenue. In addition to the time and expense required for us to supply support or indemnification to our customers, any such litigation could severely disrupt or shut down the business of our customers, which in turn could hurt our relations with our customers and cause the sale of our products to decrease.

From time to time, we are subject to warranty claims that may require us to make significant expenditures to defend these claims or pay damage awards. In the future, we may also be subject to product liability claims resulting from failure of our solutions or if products we design, manufacture, or sell, cause personal injury or property damage, even where the cause is unrelated to product defects. These risks will likely increase as our products are introduced into new devices, markets, or applications, including autonomous and semi-autonomous automotive, ~~UAV~~drone and robotic applications. In the event of a warranty claim, we may also incur costs if we compensate the affected customer. We maintain product liability insurance, but this insurance is limited in amount and subject to significant deductibles. There is no guarantee that our insurance will be available or adequate to protect against all claims. We also may incur costs and expenses relating to a recall of one of our customers’ products containing one of our devices. The process of identifying a recalled product in consumer devices that have been widely distributed may be lengthy and require significant resources, and we may incur significant replacement costs, contract damage claims from our customers and reputational harm. Costs or payments made in connection with warranty and product liability claims and product recalls could harm our financial condition and results of operations, as well as harm our reputation and cause the market value of our ordinary shares to decline.

A breach of our security systems may have a material adverse effect on our business.

Our security systems are designed to maintain the physical security of our facilities and information systems and protect our customers’, suppliers’ and employees’ confidential information. Accidental or willful security breaches or other unauthorized access by third parties to our facilities or our information systems or the existence of computer viruses in our data or software could expose us to a risk of information loss and misappropriation of proprietary and confidential information. Security breaches, computer malware and computer hacking attacks have become more prevalent and sophisticated. Experienced computer programmers and hackers may be able to penetrate our security controls and misappropriate or compromise our confidential information or that of third parties or create system disruptions. Computer programmers and hackers also may be able to develop and deploy viruses, worms and other malicious software programs that attack our information systems and cause disruptions of our business. Data security breaches may also result from non-technical means, for example, actions by an employee. Any theft or misuse of this information could result in, among other things, damage to our reputation, allegations by our customers that we have not performed our contractual obligations, litigation by affected parties and possible financial obligations for liabilities and damages related to the theft or misuse of this information, any of which could have a material adverse effect on our business, financial condition, our reputation, and our relationships with our customers and partners. We also rely on a number of third-party “cloud-based” service providers of corporate infrastructure services relating to, among other things, human resources, electronic communication services and some finance functions, and we are, of necessity, dependent on the security systems of these providers. Any security breaches or other unauthorized access by third parties to the systems of our cloud-based service providers or the existence of computer viruses in their data or software could expose us to a risk of information loss and misappropriation of confidential information. Since the techniques used to obtain unauthorized access or to sabotage systems change frequently and are often not recognized until launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures.

We rely on third parties to provide services and technology necessary for the operation of our business. Any failure of one or more of our vendors, suppliers or licensors to provide such services or technology could harm our business.

We rely on third-party vendors to provide critical services, including, among other things, services related to accounting, human resources, information technology and network monitoring that we cannot or do not create or provide ourselves. We depend on these vendors to ensure that our corporate infrastructure will consistently meet our business requirements. The ability of these third-party vendors to successfully provide reliable and high-quality services is subject to technical and operational uncertainties that are beyond our control. While we may be entitled to damages if our vendors fail to perform under their agreements with us, our agreements with these vendors limit the amount of damages we may receive. In addition, we do not know whether we will be able to collect on any award of damages or that these damages would be sufficient to cover the actual costs we would incur as a result of any vendor’s failure to perform under its agreement with us. Upon expiration or termination of any of our agreements with third-party vendors, we may not be able to replace the services provided to us in a timely manner or on terms and conditions, including service levels and cost, that are favorable to us, and a transition from one vendor to another vendor could subject us to operational delays and inefficiencies until the transition is complete.

Additionally, we incorporate third-party technology into some of our products, and we may do so in future products. The operation of our products could be impaired if errors occur in the third-party technology we use. It may be more difficult for us to correct any errors in a timely manner, if at all, because the development and maintenance of the technology is not within our control. We cannot assure you that these third parties will continue to make their technology, or improvements to the technology, available to us, or that they will continue to support and maintain their technology. Further, due to the limited number of vendors of some types of technology, it may be difficult to obtain new licenses or replace existing technology. Any impairment of the technology of or our relationship with these third parties could harm our business.

~~We are subject to governmental export and import controls that could subject us to liability or impair our ability to compete in international markets.~~

The U.S. and various foreign governments have imposed controls, export license requirements and restrictions on the import or export of certain products, technologies and software. We must export our products in compliance with U.S. export controls, including the Commerce Department’s Export Administration Regulations. We may not always be successful in obtaining necessary export licenses, and our failure to obtain required import or export approval for our products or limitations on our ability to export or sell our products imposed by these laws may harm both our international and domestic sales and adversely affect our revenue. Noncompliance with these laws could have negative consequences, including government investigations, penalties and reputational harm.

We are subject to governmental laws, regulations and other legal obligations related to privacy and data protection.

The legislative and regulatory framework for privacy and data protection issues worldwide is rapidly evolving and is likely to remain uncertain for the foreseeable future. We collect personally identifiable information, or PII, and other data as part of our business processes and activities. This data is subject to a variety of U.S. and international laws and regulations, including oversight by various regulatory or other governmental bodies. Many foreign countries and governmental bodies, including the European Union and other relevant jurisdictions where we conduct business, have laws and regulations concerning the collection and use of PII and other data obtained from their residents or by businesses operating within their jurisdictions that are currently more restrictive than those in the U.S. For example, effective May 2018, the European Union adopted the General Data Protection Regulation that imposed more stringent data protection requirements and provided for greater penalties for noncompliance. Any inability, or perceived inability, to adequately address privacy and data protection concerns, even if unfounded, or to comply with applicable laws, regulations, policies, industry standards, contractual obligations or other legal obligations, could result in additional cost and liability to us, damage our reputation and adversely affect our business.

Failure to comply with the U.S. Foreign Corrupt Practices Act, or FCPA, and similar laws associated with our activities outside of the United States could subject us to penalties and other adverse consequences.

We face significant risks if we fail to comply with the FCPA and other anti-corruption laws that prohibit improper payments or offers of payment to foreign governments and political parties by us for the purpose of obtaining or retaining business. In many foreign countries, particularly in countries with developing economies, it may be a local custom that businesses operating in such countries engage in business practices that are prohibited by the FCPA or other applicable laws and regulations. Although we implemented an FCPA compliance program, we cannot assure you that all of our employees and agents, as well as those companies to which we outsource certain of our business operations, will not take actions in violation of our policies and applicable law, for which we may be ultimately held responsible. Any violation of the FCPA or other applicable anti-corruption laws could result in severe criminal or civil sanctions and, in the case of the FCPA, suspension or debarment from U.S. government contracting, which could have a material and adverse effect on our reputation, business, financial condition, operating results and cash flows.

We, our customers and third-party contractors are subject to increasingly complex environmental regulations and compliance with these regulations may delay or interrupt our operations and adversely affect our business.

We face increasing complexity in our procurement, design, and research and development operations as a result of requirements relating to the materials composition of our products, including the European Union’s, or EU’s, Restriction on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, or RoHS, directive, which restricts the content of lead and certain other hazardous substances in specified electronic products put on the market in the EU and similar Chinese legislation relating to marking of electronic products which became effective in March 2007. Failure to comply with these and similar laws and regulations could subject us to fines, penalties, civil or criminal sanctions, contract damage claims, and take-back of non-compliant products, which could harm our business, reputation and operating results. The passage of similar requirements in additional jurisdictions or the tightening of these standards in jurisdictions where our products are already subject to such requirements could cause us to incur significant expenditures to make our products compliant with new requirements, or could limit the markets into which we may sell our products.

Some of our operations, as well as the operations of our contract manufacturers and foundry vendors and other suppliers, are also regulated under various other federal, state, local, foreign and international environmental laws and requirements, including those governing, among other matters, the management, disposal, handling, use, labeling of, and exposure to hazardous substances, and the discharge of pollutants into the air and water. Liability under environmental laws can be joint and several and without regard to comparative fault. We cannot assure you that violations of these laws will not occur in the future, as a result of human error, accident, equipment failure or other causes. Environmental laws and regulations have increasingly become more stringent over time. We expect that our products and operations will be affected by new environmental requirements on an ongoing basis, which will likely result in additional costs, which could adversely affect our business.

Our failure to comply with present and future environmental, health and safety laws could cause us to incur substantial costs, result in civil or criminal fines and penalties and decreased revenue, which could adversely affect our operating results. Failure by our foundry vendors or other suppliers to comply with applicable environmental laws and requirements could cause disruptions and delays in our product shipments, which could adversely affect our relations with our ODMs and OEMs and adversely affect our business and results of operations.

Regulations related to “conflict minerals” may force us to incur additional expenses, may make our supply chain more complex and may result in damage to our reputation with customers.

Pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, or the Dodd-Frank Act, the Securities and Exchange Commission, or the SEC, has adopted requirements for companies that use certain minerals and metals, known as conflict minerals, in their products, whether or not these products are manufactured by third parties. These requirements require companies to perform due diligence, disclose and report whether or not such minerals originate from the Democratic Republic of the Congo and adjoining countries. These requirements could adversely affect the sourcing, availability and pricing of minerals used in the manufacture of semiconductor devices, including our products. While these requirements continue to be subject to administrative uncertainty, we have incurred, and may continue to incur, costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals and metals used in our products. Since our supply chain is complex, we may not be able to sufficiently verify the origins for these minerals and metals used in our products through the due diligence procedures that we implement, which may harm our reputation. In such event, we may also face difficulties in satisfying customers who require that all of the components of our products are certified as conflict mineral free.

Rapidly changing industry standards could make our video and image processing solutions obsolete, which would cause our operating results to suffer.

We design our video and image processing solutions to conform to video compression standards, including MPEG-2, H.264 Advanced Video Coding (AVC) and H.265 High Efficiency Video Coding (HEVC), set by industry standards setting bodies such as ITU-T Video Coding Experts Group and the ISO/IEC Moving Picture Experts Group. Generally, our solutions comprise only a part of a camera device. All components of these devices must uniformly comply with industry standards in order to operate efficiently together. We depend on companies that provide other components of the devices to support prevailing industry standards. Many of these companies are significantly larger and more influential in driving industry standards than we are. Some industry standards may not be widely adopted or implemented uniformly, and competing standards may emerge that may be preferred by our customers or by consumers. If our customers or the suppliers that provide other device components adopt new or competing industry standards with which our solutions are not compatible, or if the industry groups fail to adopt standards with which our solutions are compatible, our existing solutions would become less desirable to our customers. As a result, our sales would suffer, and we could be required to make significant expenditures to develop new SoC solutions. For example, if the new H.265 video compression standard is not broadly adopted by our customers or potential customers, sales of our H.265 compliant solutions would suffer and we may be required to expend substantial resources to comply with an alternative video compression standard.~~In addition, existing standards may be challenged as infringing upon the intellectual property rights of other companies or may be superseded by new innovations or standards.~~

Products for communications applications are based on industry standards that are continually evolving. Our ability to compete in the future will depend on our ability to identify and ensure compliance with these evolving industry standards, including any new video compression standards. The emergence of new industry standards could render our solutions incompatible with products developed by other suppliers. As a result, we could be required to invest significant time and effort and to incur significant expense to redesign our solutions to ensure compliance with relevant standards. If our solutions are not in compliance with prevailing industry standards for a significant period of time, we could miss opportunities to achieve crucial design wins, which could harm our business.

~~We are subject~~ As a result, our sales would suffer, and we could be required to ~~the cyclical nature of the semiconductor industry.~~

The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence, price erosion, evolving standards, short product life cycles and wide fluctuations in product supply and demand. The industry experienced amake significant downturn during the recent global recession. These downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of average selling prices. Any future downturns could harm our business and operating results. Furthermore, any significant upturn in the semiconductor industry could result in increased competition for accessexpenditures to ~~third-party foundry and assembly capacity. We are dependent on the availability of this capacity~~develop new SoC solutions to ~~manufacture and assemble our SoC solutions. None of our third-party foundry or assembly contractors has provided assurances that adequate capacity will be available to us in the future.~~ensure compliance with relevant standards.

The use of open source software in our products, processes and technology may expose us to additional risks and compromise our proprietary intellectual property.

Our products, processes and technology sometimes utilize and incorporate software that is subject to an open source license. Open source software is typically freely accessible, usable and modifiable. Certain open source software licenses, such as the GNU General Public License, require a user who intends to distribute the open source software as a component of the user’s software to disclose publicly part or all of the source code to the user’s software. In addition, certain open source software licenses require the user of such software to make any derivative works of the open source code available to others on terms unfavorable to us or at no cost. This can subject previously proprietary software to open source license terms.

While we monitor the use of open source software in our products, processes and technology and try to ensure that no open source software is used in such a way as to require us to disclose the source code to the related product, processes or technology when we do not wish to do so, such use could inadvertently occur. Additionally, if a third-party software provider has incorporated certain types of open source software into software we license from such third-party for our products, processes or technology, we could, under certain circumstances, be required to disclose the source code to our products, processes or technology. This could harm our intellectual property position and our business, results of operations and financial condition.

Some of our operations and a significant portion of our customers and our subcontractors are located outside of the United States, which subjects us to additional risks, including increased complexity and costs of managing international operations and geopolitical instability.

We have research and development design centers and business development offices in China, Japan, Italy, South Korea and Taiwan, and we expect to continue to conduct business with companies that are located outside the United States, particularly in Asia. We purchase wafers from foreign foundries, have our solutions assembled and tested by subcontractors located in Asia, and supply our solutions to customers located outside of the United States. Even customers of ours that are based in the United States often use contract manufacturers based in Asia to manufacture their products, and these contract manufacturers typically purchase products directly from us. As a result of our international focus, we face numerous challenges and risks, including:

Our third-party contractors and their suppliers are concentrated in South Korea, Taiwan and Japan, a region subject to earthquakes and other natural disasters. Any disruption to the operations of these contractors could cause significant delays in the production or shipment of our products.

The majority of our products are manufactured by or receive components from third-party contractors located in South Korea, Taiwan and Japan. The risk of an earthquake or tsunami in South Korea, Taiwan, Japan and elsewhere in the Pacific Rim region is significant due to the proximity of major earthquake fault lines. For example, in December 2006 a major earthquake occurred in Taiwan and in March 2011 a major earthquake and tsunami occurred in Japan. Although we are not aware of any significant damage suffered by our third-party contractors as a result of those natural disasters, the occurrence of additional earthquakes or other natural disasters could result in the disruption of our foundry vendor or assembly and test capacity. A disruption in the availability of image sensors from Sony Corporation as a result of the ~~April 14,~~ 2016 Kumamoto, Japan earthquake impacted our customers’ ability to build or launch cameras and, as a result, negatively impacted the timing and scope of demand for our SoCs in fiscal year 2017. Any disruption resulting from such events could cause significant delays in the production or shipment of our products until we are able to shift our manufacturing, assembling or testing from the affected contractor to another third-party vendor. We may not be able to obtain alternate capacity on favorable terms, or at all.

Our operations and those of our manufacturers are vulnerable to interruption caused by technical breakdowns, computer hardware and software malfunctions, software viruses, infrastructure failures, regional health issues and pandemics, fires, earthquakes, floods, power losses, telecommunications failures, terrorist attacks, wars, Internet failures and other events beyond our control. Any disruption in our services or operations could result in a reduction in revenue or a claim for substantial damages against us, regardless of whether we are responsible for that failure. The outbreak of COVID-19 has resulted in significant governmental measures being implemented to control the spread of the virus, including, among others, restrictions on travel, manufacturing and the movement of employees in many regions of the world, and the imposition of remote or work from home conditions in many of our offices, including the United States and Italy. If the remote or work from home conditions continue for an extended period of time, or similar restrictions and measures are implemented in more of the locations where we have offices, we may experience delays in product development, a decreased ability to support our customers, reduced design win activity, and overall lack of productivity. We rely on our computer equipment, database storage facilities and other office equipment, which are located primarily in the seismically active San Francisco Bay Area and Taiwan. If we suffer a significant database or network facility outage, our business could experience disruption until we fully implement our back-up systems.

We are subject to regulatory compliance requirements, including Section 404 of the Sarbanes-Oxley Act of 2002, which are costly to comply with, and our failure to comply with these requirements could harm our business and operating results.

We are subject to disclosure and compliance requirements associated with being a public company, including but not limited to compliance with Section 404 of the Sarbanes-Oxley Act of 2002. For example, Section 404 of the Sarbanes-Oxley Act requires that our management report on, and our independent auditors attest to, the effectiveness of our internal control structure and procedures for financial reporting. Compliance with Section 404 requires a significant amount of time, expenses and diversion of internal resources. If we or our auditors discover a material weakness in our internal controls, the disclosure of that fact, even if quickly remedied, could reduce the market’s confidence in our financial statements and harm our stock price. In addition, if we fail to maintain effective controls over financial reporting, we could be subject to sanctions or investigations by The NASDAQ Stock Market, the SEC, or other regulatory authorities. Furthermore, investor perceptions of our company may suffer, and this could cause a decline in the market price of our ordinary shares. Any inability to provide reliable financial reports or prevent fraud could harm our business. We may not be able to effectively and timely implement necessary control changes and employee training to ensure continued compliance with the Sarbanes-Oxley Act and other regulatory and reporting requirements. We cannot assure you that in the future we will be able to continue to fully comply with the requirements of the Sarbanes-Oxley Act or that management or our auditors will conclude that our internal controls are effective in future periods. Irrespective of compliance with Section 404, any failure of our internal controls could have a material adverse effect on our stated results of operations and harm our reputation. Furthermore, investor perceptions of our company may suffer, and this could cause a decline in the market price of our ordinary shares.

Changes to financial accounting standards may affect our results of operations and could cause us to change our business practices.

We prepare our consolidated financial statements to conform to generally accepted accounting principles, or GAAP, in the United States. These accounting principles are subject to interpretation by the American Institute of Certified Public Accountants, the SEC and various bodies formed to interpret and create accounting rules and regulations. Changes in those accounting rules ~~including the new revenue recognition guidance and the associated adoption efforts, which are currently underway,~~ could have a significant effect on our financial results, require significant resources, pose challenges in forecasting revenue and may affect our reporting of transactions completed before a change is announced. Changes to those rules or the questioning of current practices may adversely affect our reported financial results or the way we conduct our business.

Upon the adoption of ASC 606 on February 1, 2018, we recognize revenue on sales to distributors upon shipment and transfer of control (known as “sell-in” revenue recognition) based on the amount of consideration expected to be received. To the extent that the actual consideration received is materially different from estimated variable consideration recognized, we may be required to adjust revenue in subsequent periods.

The complexity of calculating our tax provision may result in errors that could result in restatements of our financial statements.

We are incorporated in the Cayman Islands and our operations are subject to income and transaction taxes in the United States, China, Hong Kong, Japan, Italy, South Korea, Taiwan and other jurisdictions in which we do business. Due to the complexity associated with the calculation of our tax provision, we have hired independent tax advisors to assist us. If we or our independent tax advisors fail to resolve or fully understand certain issues, there may be errors that could result in us having to restate our financial statements. Restatements are generally costly and could adversely impact our results of operations or have a negative impact on the trading price of our ordinary shares.

Changes in effective tax rates or adverse outcomes resulting from examination of our income tax returns could adversely affect our results.

Our future effective tax rates could be adversely affected if our earnings are lower than anticipated in countries where we have lower statutory rates and higher than anticipated in countries where we have higher statutory rates, by changes in the valuation of our deferred tax assets and liabilities, tax effects of share-based compensation, or by changes in tax laws, regulations, accounting principles or interpretations thereof. For example, changes in tax laws, including the U.S. federal tax legislation commonly referred to as the Tax Cuts and Jobs Act of 2017, ~~(Tax Act),~~or Tax Act, as well as other factors, could cause us to experience fluctuations in our tax obligations and effective tax rates and otherwise adversely affect our tax positions and/or our tax liabilities.

The Tax Act requires complex computations not previously provided in U.S. tax law. The U.S. Department of Treasury has broad authority to issue regulations and interpretative guidance that may significantly impact how we will apply the law and impact our results of operations in the period issued. As such, the application of accounting guidance for such items is currently uncertain. Further, compliance with the Tax Act and the accounting for such provisions require accumulation of information not previously required or regularly produced. While we have completed our accounting for the effects of the Tax Act, additional regulatory guidance may still be issued by the applicable taxing authorities which could materially affect our tax obligations and effective tax rate.

In addition, our income tax returns are subject to continuous examination by the Internal Revenue Service, or IRS, and other tax authorities. We regularly assess the likelihood of adverse outcomes resulting from these examinations to determine the adequacy of our provision for income taxes. We cannot assure you that the outcomes from these continuous examinations will not have an adverse effect on our operating results and financial condition.

Unfavorable tax law changes, an unfavorable governmental review of our tax returns, changes in our geographical earnings mix or imposition of withholding taxes on repatriated earnings could adversely affect our effective tax rate and our operating results.

Our operations are subject to certain taxes, such as income and transaction taxes, in the Cayman Islands, the United States, China, Hong Kong, Japan, Italy, South Korea, Taiwan and other jurisdictions in which we do business. A change in the tax laws in the jurisdictions in which we do business, including an increase in tax rates or an adverse change in the treatment of an item of income or expense, possibly with retroactive effect, could result in a material increase in the amount of taxes we incur. In particular, past proposals have been made to change certain U.S. tax laws relating to foreign entities with U.S. connections, which may include us. For example, previously proposed legislation has considered treating certain foreign corporations as U.S. domestic corporations (and therefore taxable on all of their worldwide income) if the management and control of the foreign corporation occurs, directly or indirectly, primarily within the United States. If such legislation were enacted, we could, depending on the precise form, be subject to U.S. taxation notwithstanding our domicile outside the United States. In addition, on October 5, 2015 the Organization for Economic Co-operation and Development, or OECD, which represents a coalition of member countries, released its final reports from the BEPS Action Plans. The final reports include recommendations covering a number of issues, including country-by-country reporting, permanent establishment rules, transfer pricing rules and tax treaties. These changes, which have been or are in the process of being adopted by numerous countries, could increase uncertainties and may adversely affect our provision for income taxes. In December 2018, the Cayman Islands passed the International Tax Co-Operation (Economic Substance) Law, 2018. Effective as of January 1, 2019, the new legislation requires Cayman Islands companies carrying one or more relevant activity to maintain a substantial economic presence in the Cayman Islands. ~~This~~Effective from December 31, 2019, we have structured our activities to comply with the new law. However, the legislation remains subject to further clarification and interpretation and accordingly, there is no guarantee that we will be deemed to be compliant. Furthermore, this legislation may require us to make additional changes to the activities we carry on in the Cayman Islands, which could increase our cost of operations, and we could be subject to penalties for lack of compliance. WeAs a result, we are not able to determine the impact on our operations and net income as of the current ~~period, as the legislation remains subject to further clarification and interpretation.~~period.

We are subject to periodic audits or other reviews by tax authorities in the jurisdictions in which we conduct our activities. Any such audit, examination or review requires management’s time, diverts internal resources and, in the event of an unfavorable outcome, may result in additional tax liabilities or other adjustments to our historical results.

Because we conduct operations in multiple jurisdictions, our effective tax rate is influenced by the amounts of income and expense attributed to each such jurisdiction. If such amounts were to change so as to increase the amounts of our net income subject to taxation in higher-tax jurisdictions, or if we were to commence operations in jurisdictions assessing relatively higher tax rates, our effective tax rate could be adversely affected. In addition, we may determine that it is advisable from time to time to repatriate earnings from subsidiaries under circumstances that could give rise to imposition of potentially significant withholding taxes by the jurisdictions in which such amounts were earned, without our receiving the benefit of any offsetting tax credits, which could also adversely impact our effective tax rate.

We may be classified as a passive foreign investment company which could result in adverse U.S. federal income tax consequences for U.S. holders of our ordinary shares.

Based on the current and anticipated valuation of our assets and the composition of our income and assets, we do not expect to be considered a passive foreign investment company, or PFIC, for U.S. federal income tax purposes for our 2020 fiscal year or the foreseeable future. However, a separate determination must be made at the close of each taxable year as to whether we are a PFIC for that taxable year, and we cannot assure you that we will not be a PFIC for our ~~2020~~2021 fiscal year or any future taxable year. Under current law, a non-U.S. corporation will be considered a PFIC for any taxable year if either (a) at least 75% of its gross income is passive income or (b) at least 50% of the value of its assets, generally based on an average of the quarterly values of the assets during a taxable year, is attributable to assets that produce or are held for the production of passive income. PFIC status depends on the composition of our assets and income and the value of our assets (which may be based in part on the value of our ordinary shares which may fluctuate), including, among others, a pro rata portion of the income and assets of each subsidiary in which we own, directly or indirectly, at least 25% by value of the subsidiary’s equity interests, from time to time. Because we currently hold, and expect to continue to hold, a substantial amount of cash or cash equivalents, and because the calculation of the value of our assets may be based in part on the value of our ordinary shares which may fluctuate and may fluctuate considerably given that market prices of technology companies historically often have been volatile, we may be a PFIC for any taxable year. If we were treated as a PFIC for any taxable year during which a U.S. holder held ordinary shares, certain adverse U.S. federal income tax consequences could apply for such U.S. holder.

Changes in our United States federal income tax classification, or that of our subsidiaries, could result in adverse tax consequences to our 10% or greater U.S. shareholders.

The Tax Act may have changed the consequences to U.S. shareholders that own, or are considered to own, as a result of the attribution rules, ten percent or more of the voting power or value of the stock of a non-U.S. corporation (a 10% U.S. shareholder) under the U.S. Federal income tax law applicable to owners of U.S. controlled foreign corporations, or CFCs.

Prior to the Tax Act, we did not believe that we, or any of our non-U.S. subsidiaries, were considered a CFC, which is a determination made daily based on whether the 10% U.S. shareholders together own, or are considered to own ~~as a result of~~under the attribution rules, more than fifty percent of the voting power or value of a non-U.S. corporation. The Tax Act repealed Internal Revenue Code Section 958(b)(4), which, unless clarified in future regulations or other guidance, may result in classification of certain of the Company’s foreign subsidiaries as CFCs with respect to any single 10% U.S. shareholder. This may be the result without regard to whether 10% U.S. shareholders together own, directly or indirectly, more than fifty percent of the voting power or value of the Company as was the case under prior rules. The repeal is effective as of the last taxable year of CFCs beginning before January 1, 2018 and for the taxable year of 10% U.S. shareholders in which the CFCs' taxable year ends.

Fluctuations in exchange rates between and among the currencies of the countries in which we do business may adversely affect our operating results.

Our sales have been historically denominated in U.S. dollars. An increase in the value of the U.S. dollar relative to the currencies of the countries in which our end customers operate could impair the ability of our end customers to cost-effectively integrate our SoCs into their devices which may materially affect the demand for our solutions and cause these end customers to reduce their orders, which would adversely affect our revenue and business. We may experience foreign exchange gains or losses due to the volatility of other currencies compared to the U.S. dollar. A significant portion of our solutions are sold to camera manufacturers located outside the United States, primarily in Asia. Sales to customers in Asia accounted for approximately ~~87%~~90%, ~~79%~~87% and ~~73%~~79% of our total revenue in fiscal years 2020, 2019 and 2018, ~~and 2017,~~ respectively. ~~Sales~~For the six months ended July 31, 2020, sales to customers in Asia accounted for approximately ~~88%~~87% of our total ~~revenue for the nine months ended October 31, 2019.~~revenue. Because most of our end customers or their ODM manufacturers are located in Asia, we anticipate that a majority of our future revenue will continue to come from sales to that region. Although a large percentage of our sales are made to customers in Asia, we believe that a significant number of the products designed by these customers and incorporating our SoCs are then sold to consumers globally. In addition, if in the future we sell products or purchase inventory in currencies other than the U.S. dollar, our exposure to foreign currency risk could become more significant.

A significant number of our employees are located in Asia, principally Taiwan and China. Therefore, a portion of our payroll as well as certain other operating expenses are paid in currencies other than the U.S. dollar, such as the New Taiwan Dollar and the Chinese Yuan Renminbi. Our operating results are denominated in U.S. dollars and the difference in exchange rates in one period compared to another may directly impact period-to-period comparisons of our operating results. Furthermore, currency exchange rates, particularly the exchange rates between the Chinese Yuan Renminbi and the U.S. dollar and between the New Taiwan Dollar and the U.S. dollar, have been especially volatile in the recent past and these currency fluctuations may make it difficult for us to predict our operating results.

We have not implemented any hedging strategies to mitigate risks related to the impact of fluctuations in currency exchange rates. Even if we were to implement hedging strategies, not every exposure can be hedged and, where hedges are put in place based on expected foreign exchange exposure, they are based on forecasts which may vary or which may later prove to have been inaccurate. Failure to hedge successfully or anticipate currency risks accurately could adversely affect our operating results.

We may make acquisitions in the future that could disrupt our business, cause dilution to our shareholders, reduce our financial resources and harm our business.

In the future, we may acquire other businesses, products or technologies. Other than our acquisition of VisLab S.r.l., or VisLab, in June 2015, we have not made any acquisitions to date and do not have any agreements or commitments for any specific acquisition at this time. Our ability to make and successfully integrate acquisitions is unproven. Our acquisition of VisLab and any future acquisitions may not strengthen our competitive position and may be viewed negatively by our customers, financial markets or investors, and we may not achieve our goals in a timely manner, or at all. In addition, any acquisitions we make could lead to difficulties in integrating personnel, technologies and operations from the acquired businesses and in retaining and motivating key personnel from these businesses. Acquisitions may disrupt our ongoing operations, divert management from their primary responsibilities, subject us to additional liabilities, increase our expenses and adversely impact our business, operating results, financial condition and cash flows. Acquisitions may also reduce our cash available for operations and other uses, and could also result in an increase in amortization expense related to identifiable assets acquired, potentially dilutive issuances of equity securities or the incurrence of debt, any of which could harm our business.

We cannot predict our future capital needs, and we may not be able to obtain additional financing to fund our operations.

We may need to raise additional funds in the future. Any required additional financing may not be available on terms acceptable to us, or at all. If we raise additional funds by issuing equity securities or convertible debt, investors may experience significant dilution of their ownership interest, and the newly-issued securities may have rights senior to those of the holders of our ordinary shares. If we raise additional funds by obtaining loans from third parties, the terms of those financing arrangements may include negative covenants or other restrictions on our business that could impair our operational flexibility and would also require us to incur interest expense. If additional financing is not available when required or is not available on acceptable terms, we may have to scale back our operations or limit our production activities, and we may not be able to expand our business, develop or enhance our products, take advantage of business opportunities or respond to competitive pressures which could result in lower revenue and reduce the competitiveness of our products.

Our marketable securities portfolio could experience a decline in market value, which could materially and adversely affect our financial results.

As of ~~October~~July 31, ~~2019,~~2020, we had approximately ~~$209.8~~$214.0 million in debt security investments. These investments consisted primarily of money market funds, commercial paper, asset-backed securities, U.S. government securities and debt securities of ~~corporations which are focused on the preservation of our capital.~~corporations. We currently do not use derivative financial instruments to adjust our investment portfolio risk or income profile. These investments, as well as any cash deposited in bank accounts, are subject to general credit, liquidity, market and interest rate risks, which may be exacerbated by unusual events, such as the COVID-19 pandemic, the Eurozone crisis and the U.S. debt ceiling crisis, which affected various sectors of the financial markets and led to global credit and liquidity issues. If the global credit market continues to experience volatility or deteriorates, our investment portfolio may be impacted and some or all of our investments may experience other-than-temporary impairment which could adversely impact our financial results and position.

The market price of our ordinary shares may be volatile, which could cause the value of your investment to decline.

Since our initial public offering in October 2012, the market price of our ordinary shares has been highly volatile. The trading price of our ordinary shares is likely to remain volatile and could be subject to wide fluctuations in price in response to various factors, some of which are beyond our control. These factors include:

In addition, the stock market in general, and the market for semiconductor and other technology companies in particular, have experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of those companies. These broad market and industry factors may cause the market price of our ordinary shares to decrease, regardless of our actual operating performance. These trading price fluctuations may also make it more difficult for us to use our ordinary shares as a means to make acquisitions or to use options to purchase our ordinary shares to attract and retain employees. If the market price of our ordinary shares declines, you may not realize any return on your investment in us and may lose some or all of your investment. In addition, in the past, following periods of volatility in the overall market and the market price of a company’s securities, securities class action litigation has often been instituted against these companies. This litigation, if instituted against us, could result in substantial costs and a diversion of our management’s attention and resources.

If securities analysts or industry analysts downgrade our ordinary shares, publish negative research or reports or fail to publish reports about our business, our stock price and trading volume could decline.

The trading market for our ordinary shares will be influenced by the research and reports that industry or securities analysts publish about us, our business and our market. If one or more analysts adversely changes their recommendation regarding our stock or our competitors’ stock, our stock price would likely decline. If one or more analysts cease coverage of us or fail to regularly publish reports on us, we could lose visibility in the financial markets which in turn could cause our stock price or trading volume to decline.

Our actual operating results may ~~differ significantly from~~not meet or exceed our guidance and investor expectations, which would likely cause our stock price to decline.

From time to time, we may release guidance in our earnings releases, earnings conference calls or otherwise, regarding our future performance that represent our management’s estimates as of the date of release. If given, this guidance, which will include forward-looking statements, will be based on projections prepared by our management. Projections are based upon a number of assumptions and estimates that, while presented with numerical specificity, are inherently subject to significant business, economic and competitive uncertainties and contingencies, many of which are beyond our control. The principal reason that we expect to release guidance is to provide a basis for our management to discuss our business outlook with analysts and investors. With or without our guidance, analysts and other investors may publish expectations regarding our business, financial performance and results of operations. We do not accept any responsibility for any projections or reports published by any such third persons.

Guidance is necessarily speculative in nature, and it can be expected that some or all of the assumptions of the guidance furnished by us will not materialize or will vary significantly from actual results. If our actual performance does not meet or exceed our guidance or investor expectations, the trading price of our ordinary shares is likely to decline.

The price of our ordinary shares could decrease as a result of shares being sold in the market.

Sales of a substantial number of our ordinary shares in the public market, or the perception that these sales might occur, could cause the market price of our ordinary shares to decline. We filed registration statements on Form S-8 under the Securities Act to register shares for issuance under our 2004 Stock Plan, 2012 Equity Incentive Plan and the Amended and Restated 2012 Employee Stock Purchase Plan. Our 2012 Equity Incentive Plan and the Amended and Restated 2012 Employee Stock Purchase Plan provide for automatic increases in the shares reserved for issuance under these plans which could result in additional dilution to our shareholders. These shares can be freely sold in the public market upon issuance and vesting, subject to restrictions provided under the terms of the applicable plan and/or the option agreements entered into with option holders.

We may also issue ordinary shares or securities convertible into ordinary shares from time to time in connection with a financing, acquisition or otherwise. Any such issuance could result in substantial dilution to our existing shareholders and cause the trading price of our stock to decline.

We do not intend to pay dividends on our ordinary shares and, consequently, a shareholder’s ability to achieve a return on its investment will depend on appreciation in the price of our ordinary shares.

We have never declared or paid any cash dividends on our ordinary shares and do not currently intend to do so for the foreseeable future. We currently intend to invest our future earnings, if any, to fund our growth. Therefore, shareholders are not likely to receive any dividends on their ordinary shares for the foreseeable future and the success of an investment in our ordinary shares will depend upon any future appreciation in their value. There is no guarantee that our ordinary shares will appreciate in value or even maintain the price at which our shareholders have purchased their shares. Investors seeking cash dividends should not purchase our ordinary shares.

Provisions of our memorandum and articles of association and Cayman Islands corporate law may discourage or prevent an acquisition of us which could adversely affect the value of our ordinary shares.

Provisions of our memorandum and articles of association and Cayman Islands law may have the effect of delaying or preventing a change of control or changes in our management. These provisions include the following:

Holders of our ordinary shares may face difficulties in protecting their interests because we are incorporated under Cayman Islands law.

Our corporate affairs are governed by our amended and restated memorandum and articles of association, by the Companies Law (as the same may be supplemented or amended from time to time) of the Cayman Islands and by the common law of the Cayman Islands. The rights of our shareholders and the fiduciary responsibilities of our directors under Cayman Islands law are not as clearly established as under statutes or judicial precedent in existence in jurisdictions in the United States. In particular, the Cayman Islands has a less developed body of securities laws than the United States and provides significantly less protection to investors. There is no legislation specifically dedicated to the rights of investors in securities and thus no statutorily defined private cause of action specific to investors such as those provided under the Securities Act or the Securities Exchange Act of 1934, as amended. In addition, shareholders of Cayman Islands companies may not have standing to initiate shareholder derivative actions in U.S. federal courts. Therefore, you may have more difficulty in protecting your interests in the face of actions by our management, directors or controlling shareholders than would shareholders of a corporation incorporated in a jurisdiction in the United States due to the comparatively less developed nature of Cayman Islands law in this area.

Shareholders of Cayman Islands exempted companies, such as our company, have no general rights under Cayman Islands law to inspect corporate records and accounts or to obtain copies of lists of shareholders of the company. Our directors have discretion under our articles of association to determine whether or not, and under what conditions, our corporate records may be inspected by our shareholders, but are not obliged to make them available to our shareholders. This may make it more difficult for you to obtain the information needed to establish any facts necessary for a shareholder motion or to solicit proxies from other shareholders in connection with a proxy contest.

Subject to limited exceptions, under Cayman Islands law, a minority shareholder may not bring a derivative action against the board of directors.

Holders of our ordinary shares may have difficulty obtaining or enforcing a judgment against us because we are incorporated under the laws of the Cayman Islands.

It may be difficult or impossible for you to bring an action against us in the Cayman Islands if you believe your rights have been infringed under U.S. securities laws. There is no statutory recognition in the Cayman Islands of judgments obtained in the United States, although the courts of the Cayman Islands will in certain circumstances recognize and enforce a non-penal judgment of a foreign court of competent jurisdiction without retrial on the merits. While there is no binding authority on this point, this is likely to include, in certain circumstances, a non-penal judgment of a United States court imposing a monetary award based on the civil liability provisions of the U.S. federal securities laws. The Grand Court of the Cayman Islands may stay proceedings if concurrent proceedings are being brought elsewhere. There is uncertainty as to whether the Grand Court of the Cayman Islands would recognize or enforce judgments of United States courts obtained against us predicated upon the civil liability provisions of the securities laws of the United States or any state thereof and whether the Grand Court of the Cayman Islands would hear original actions brought in the Cayman Islands against us predicated upon the securities laws of the United States or any state thereof.

The exhibits listed in the accompanying Exhibit Index are filed or incorporated by reference as part of this Quarterly Report.

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

Cayman Islands		98-0459628
(State or other jurisdiction of incorporation or organization)		(I.R.S. Employer Identification No.)

3101 Jay Street Santa Clara, California		95054
(Address of principal executive offices)		(Zip Code)

Title of each class	Trading Symbol	Name of each exchange on which registered
Ordinary Shares, $0.00045 Par Value Per Share	AMBA	The Nasdaq Global Market

		Page

PART I. FINANCIAL INFORMATION			3

Item 1.	Financial Statements		3

	Unaudited Condensed Consolidated Balance Sheets at ~~October~~July 31, ~~2019~~2020 and January 31, ~~2019~~2020		3

	Unaudited Condensed Consolidated Statements of Operations for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019~~2020 and ~~2018~~2019		4

	Unaudited Condensed Consolidated Statements of Comprehensive Loss for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019~~2020 and ~~2018~~2019		5

	Unaudited Condensed Consolidated Statements of Shareholders’ Equity for the three and ~~nine~~six months ended ~~October~~July 31, ~~2019~~2020 and ~~2018~~2019		6

	Unaudited Condensed Consolidated Statements of Cash Flows for the ~~nine~~six months ended ~~October~~July 31, ~~2019~~2020 and ~~2018~~2019		87

	Notes to Unaudited Condensed Consolidated Financial Statements		98

Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operations		2522

Item 3.	Quantitative and Qualitative Disclosures About Market Risk		3633

Item 4.	Controls and Procedures		3633

PART II. OTHER INFORMATION			3734

Item 1.	Legal Proceedings		3734

Item 1A.	Risk Factors		3734

Item 2.	Unregistered Sales of Equity Securities and Use of Proceeds		6258

Item 6.	Exhibits		6258

Signatures			6460

Exhibit Number	Description

3.1(1)		Amended and Restated Memorandum of Association and Second Amended and Restated Articles of Association of the Registrant.

~~10.1+~~		~~Standard Lease between Ambarella Corporation and The Realty Associates Fund XI Portfolio, L.P., dated as of August 8, 2019.~~

31.1		Certification of Principal Executive Officer Required Under Rule 13a-14(a) and 15d-14(a) of the Securities Exchange Act of 1934, as amended.

31.2		Certification of Principal Financial Officer Required Under Rule 13a-14(a) and 15d-14(a) of the Securities Exchange Act of 1934, as amended.

32.1±		Certification of Principal Executive Officer and Principal Financial Officer Required Under Rule 13a-14(b) of the Securities Exchange Act of 1934, as amended, and 18 U.S.C. §1350.

101.INS		Inline XBRL Instance Document – the instance document does not appear in the Interactive Data file because its XBRL tags are embedded within the Inline XBRL document

101.SCH		Inline XBRL Taxonomy Schema Linkbase Document

101.CAL		Inline XBRL Taxonomy Calculation Linkbase Document

101.DEF		Inline XBRL Taxonomy Definition Linkbase Document

101.LAB		Inline XBRL Taxonomy Labels Linkbase Document

101.PRE		Inline XBRL Taxonomy Presentation Linkbase Document

104		The cover page from the Company’s Quarterly Report on Form 10-Q for the quarter ended ~~July 31, 2019,~~April 30, 2020, has been formatted in Inline XBRL and included in Exhibit 101.



	AMBARELLA, INC.

Date: ~~December 6, 2019~~September 9, 2020	By:	/s/ Feng-Ming Wang
		Feng-Ming Wang
		President and Chief Executive Officer

Date: ~~December 6, 2019~~September 9, 2020	By:	/s/ Kevin C. Eichler
		Kevin C. Eichler
		Chief Financial Officer

	Balance as of					Opening Balance as of
	January 31, 2019		Adjustment			February 1, 2019
	(in thousands)
Operating lease right-of-use assets	$	—	$	8,581		$	8,581
Prepaid expenses and other current assets	$	6,206	$	(174	)	$	6,032
Accrued and other current liabilities	$	24,700	$	(279	)	$	24,421
Operating lease liabilities, current	$	—	$	2,534		$	2,534
Operating lease liabilities, non-current	$	—	$	6,152		$	6,152

Large accelerated filer

Accelerated filer

Non-accelerated filer

Smaller reporting company

Emerging growth company