Docoh
Loading...

ESP Espey Manufacturing & Electronics

Filed: 8 Feb 17, 7:00pm

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D. C. 20549

 

FORM 10-Q

 

QUARTERLY Report Pursuant to Section 13 or 15 (d) of the Securities Exchange Act of 1934

For the quarterly period ended December 31, 2016

 

Commission File Number I-4383

 

ESPEYLogoPrint.jpg

 

ESPEY MFG. & ELECTRONICS CORP.

(Exact name of registrant as specified in its charter)

NEW YORK

(State of incorporation)

14-1387171

(I.R.S. Employer's Identification No.)

 

 

233 Ballston Avenue, Saratoga Springs, New York 12866

(Address of principal executive offices)

518-245-4400

(Registrant's telephone number, including area code)

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15 (d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

xYes          oNo

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

xYes          oNo

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company:

oLarge accelerated fileroNon-accelerated filer
oAccelerated filerxSmaller reporting company

 

Indicate by check mark whether the registrant is a shell company.

oYes          xNo

 

At February 9, 2017, there were 2,371,321 shares outstanding of the registrant's Common stock, $.33-1/3 par value.

 

 

 

ESPEY MFG. & ELECTRONICS CORP.

Quarterly Report on Form 10-Q

I N D E X

 

PART IFINANCIAL INFORMATIONPAGE
    
 Item 1Financial Statements: 
    
  Balance Sheets - 
  December 31, 2016 (Unaudited) and June 30, 20161
    
  Statements of Comprehensive Income (Unaudited) - 
  Three and Six Months Ended December 31, 2016 and 20152
    
  Statements of Cash Flows (Unaudited) - 
  Six Months Ended December 31, 2016 and 20153
    
  Notes to Financial Statements (Unaudited)4
    
 Item 2Management's Discussion and Analysis of9
  Financial Condition and Results of Operations 
    
 Item 3Quantitative and Qualitative Disclosures about Market Risk13
    
 Item 4Controls and Procedures13
    
PART IIOTHER INFORMATION
    
 Item 1Legal Proceedings14
    
 Item 2Unregistered Sales of Equity Securities14
    
 Item 3Defaults upon Senior Securities14
    
 Item 4Mine Safety Disclosures14
    
 Item 5Other Information14
    
 Item 6Exhibits14
    
 SIGNATURES15

 

 

PART I: FINANCIAL INFORMATION

ESPEY MFG. & ELECTRONICS CORP.

Balance Sheets

December 31, 2016 (Unaudited) and June 30, 2016

  December 31, 2016  June 30, 2016 
ASSETS:        
     Cash and cash equivalents $8,857,278  $10,031,644 
     Investment securities  8,966,041   5,580,059 
     Trade accounts receivable, net of allowance of $3,000  3,752,842   4,957,464 
     Income tax receivable  316,228   329,298 
         
     Inventories:        
               Raw materials  1,382,990   1,418,862 
               Work-in-process  642,876   504,674 
               Costs related to contracts in process, net of advance        
               payments of $32,831 and $18,313 at December 31, 2016        
               and June 30, 2016, respectively  7,316,683   8,810,145 
                              Total inventories  9,342,549   10,733,681 
         
     Deferred tax assets  217,764   252,558 
     Prepaid expenses and other current assets  87,513   219,688 
                              Total current assets  31,540,215   32,104,392 
         
     Property, plant and equipment, net  2,355,109   2,348,525 
                              Total assets $33,895,324  $34,452,917 
         
LIABILITIES AND STOCKHOLDERS' EQUITY:        
     Accounts payable $436,135  $552,787 
     Accrued expenses:        
          Salaries and wages  179,971   357,910 
          Vacation  683,551   704,761 
          ESOP payable  186,043    
          Other  102,179   196,631 
     Payroll and other taxes withheld  52,865   49,353 
                         Total current liabilities  1,640,744   1,861,442 
     Deferred tax liabilities  202,248   203,237 
                         Total liabilities  1,842,992   2,064,679 
         
          Commitments and contingencies (see Note 5)        
         
     Common stock, par value $.33-1/3 per share        
          Authorized 10,000,000 shares; Issued 3,029,874 shares        
               as of December 31, 2016 and June 30, 2016.  Outstanding        
               2,370,521 and 2,364,684 as of December 31, 2016        
              and June 30, 2016, respectively (includes 53,334  1,009,958   1,009,958 
               and 61,667 Unearned  ESOP shares, respectively)        
     Capital in excess of par value  17,388,596   17,253,072 
     Accumulated other comprehensive loss  (2,664)  (1,408)
     Retained earnings  22,333,224   22,820,938 
   40,729,114   41,082,560 
     Less: Unearned ESOP shares  (891,083)  (891,083)
               Cost of 659,353 and 665,190 shares of common stock        
               in treasury as of December 31, 2016 and        
               June 30, 2016, respectively  (7,785,699)  (7,803,239)
                              Total stockholders’ equity  32,052,332   32,388,238 
                              Total liabilities and stockholders' equity $33,895,324  $34,452,917 

The accompanying notes are an integral part of the financial statements.

ESPEY MFG. & ELECTRONICS CORP.

Statements of Comprehensive Income (Unaudited)

Three and Six Months Ended December 31, 2016 and 2015

 

  Three Months Ended  Six Months Ended 
  December 31,  December 31, 
  2016  2015  2016  2015 
             
Net sales $5,667,624  $7,242,020  $11,736,308  $13,521,456 
Cost of sales  4,587,479   5,653,977   9,312,416   9,965,093 
     Gross profit  1,080,145   1,588,043   2,423,892   3,556,363 
                 
Selling, general and administrative expenses  750,381   754,958   1,523,047   1,504,608 
     Operating income  329,764   833,085   900,845   2,051,755 
                 
Other income                
     Interest income  11,454   10,610   23,475   18,063 
     Other  7,201   26,563   14,203   44,551 
          Total other income  18,655   37,173   37,678   62,614 
                 
Income before provision for income taxes  348,419   870,258   938,523   2,114,369 
                 
Provision for income taxes  104,340   255,831   273,619   621,412 
                 
                    Net income $244,079  $614,427  $664,904  $1,492,957 
                 
Other comprehensive income, net of tax:                
     Unrealized (loss) gain on investment securities  (570)  (905)  (1,256)  874 
                 
                    Total comprehensive income $243,509  $613,522  $663,648  $1,493,831 
                 
                 
Net income per share:                
                 
     Basic $0.11  $0.27  $0.29  $0.65 
     Diluted $0.11  $0.27  $0.29  $0.65 
                 
Weighted average number of shares outstanding:                
                 
     Basic  2,308,588   2,276,401   2,305,825   2,280,262 
     Diluted  2,323,604   2,294,020   2,321,295   2,298,913 
                 
Dividends per share: $0.25  $0.25  $0.50  $0.50 

 

The accompanying notes are an integral part of the financial statements.

ESPEY MFG. & ELECTRONICS CORP.

Statements of Cash Flows (Unaudited)

Six Months Ended December 31, 2016 and 2015

 

  December 31, 2016  December 31, 2015 
Cash Flows from Operating Activities:        
     Net income $664,904  $1,492,957 
         
Adjustments to reconcile net income to net cash        
       provided by operating activities:        
     Excess tax benefits from share-based compensation  (8,066)  (15,021)
     Stock-based compensation  53,048   52,249 
     Depreciation  216,628   218,021 
     ESOP compensation expense  216,876   224,175 
     Loss on disposal of assets     147 
     Deferred income tax expense  34,481   31,600 
     Changes in assets and liabilities:        
          Decrease in trade receivable, net  1,204,622   2,656,012 
          Decrease (increase) income taxes receivable  21,136   (207,551)
          Decrease (increase) in inventories, net  1,391,132   (121,508)
          Decrease in prepaid expenses and other current assets  132,175   100,561 
          Decrease in accounts payable  (116,652)  (371,694)
          Decrease in accrued salaries and wages  (177,939)  (89,507)
          Decrease in vacation accrual  (21,210)  (43,308)
          Decrease in ESOP payable  (30,833)  (59,375)
          Decrease in other accrued expenses  (94,452)  (100,541)
          Increase in payroll and other taxes withheld  3,512   38,595 
          Increase in income taxes payable     12,305 
                    Net cash provided by operating activities  3,489,362   3,818,117 
         
Cash Flows from Investing Activities:        
     Additions to property, plant and equipment  (223,211)  (82,341)
     Purchase of investment securities  (6,232,932)  (2,347,595)
     Proceeds from sale/maturity of investment securities  2,845,017   1,282,686 
                    Net cash used in investing activities  (3,611,126)  (1,147,250)
         
Cash Flows from Financing Activities:        
     Dividends on common stock  (1,152,618)  (1,710,215)
     Purchase of treasury stock  (44,335)  (355,418)
     Proceeds from exercise of stock options  136,285   67,558 
     Excess tax benefits from share-based compensation  8,066   15,021 
                    Net cash used in financing activities  (1,052,602)  (1,983,054)
         
(Decrease) increase in cash and cash equivalents  (1,174,366)  687,813 
Cash and cash equivalents, beginning of period  10,031,644   8,859,405 
Cash and cash equivalents, end of period $8,857,278  $9,547,218 
         
Supplemental Schedule of Cash Flow Information:        
     Income taxes paid $218,000  $786,000 

 

The accompanying notes are an integral part of the financial statements.

 

ESPEY MFG. & ELECTRONICS CORP.

Notes to Financial Statements (Unaudited)

Note 1.Basis of Presentation

In the opinion of management the accompanying unaudited financial statements contain all adjustments (consisting of only normal recurring adjustments) necessary for a fair presentation of the results for such periods. The results for any interim period are not necessarily indicative of the results to be expected for the full fiscal year. Certain information and footnote disclosures normally included in financial statements prepared in accordance with United States generally accepted accounting principles have been condensed or omitted. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of assets and liabilities. On an ongoing basis, we evaluate our estimates and judgments, including those related to revenue recognition, inventories, income taxes, and stock-based compensation. Management bases its estimates on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions. These financial statements should be read in conjunction with the Company's most recent audited financial statements included in its report on Form 10-K for the year ended June 30, 2016. Certain reclassifications may have been made to the prior year financial statements to conform to the current year presentation.

Note 2. Investment Securities and Fair Value of Financial Investments

ASC 820 establishes a fair value hierarchy which requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. The standard describes three levels of inputs that may be used to measure fair value:

§Level 1: Quoted prices (unadjusted) for identical assets or liabilities in active markets that the entity has the ability to access as of the measurement date.
§Level 2: Significant other observable inputs other than Level 1 prices such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data.
§Level 3: Significant unobservable inputs that reflect a reporting entity’s own assumptions about the assumptions that market participants would use in pricing an asset or liability.

The carrying amounts of financial instruments, including cash and cash equivalents, short term investment securities, accounts receivable, accounts payable and accrued expenses, approximated fair value as of December 31, 2016 and June 30, 2016 because of the immediate or short-term maturity of these financial instruments.

Investment securities at December 31, 2016 and June 30, 2016 consist of certificates of deposit and municipal bonds which are classified as available-for-sale securities and have been determined to be level 1 assets. The cost, gross unrealized gains, gross unrealized losses and fair value of available-for-sale securities by major security type at December 31, 2016 and June 30, 2016 are as follows:

 

     Gross  Gross    
  Amortized  Unrealized  Unrealized  Fair 
  Cost  Gains  Losses  Value 
December 31, 2016                
Certificates of deposit $8,889,000  $  $  $8,889,000 
Municipal bonds  77,508      (467)  77,041 
Total investment securities $8,966,508  $  $(467) $8,966,041 
June 30, 2016                
Certificates of deposit $4,871,000  $  $  $4,871,000 
Municipal bonds  707,593   1,466      709,059 
Total investment securities $5,578,593  $1,466  $  $5,580,059 

The portfolio is diversified and highly liquid and primarily consists of investment grade fixed income instruments. At December 31, 2016, the Company did not have any investments in individual securities that have been in a continuous loss position considered to be other than temporary.

As of December 31, 2016 and June 30, 2016, the contractual maturities of available-for-sale securities were as follows:

  Years to Maturity    
  Less than  One to    
  One Year  Five Years  Total 
December 31, 2016            
Available-for-sale $8,644,000  $322,041  $8,966,041 
             
June 30, 2016            
Available-for-sale $4,811,511  $768,548  $5,580,059 
Note 3.Net Income per Share

Basic net income per share excludes dilution and is computed by dividing net income available to common stockholders by the weighted average number of common shares outstanding for the period. Diluted net income per share reflects the potential dilution that could occur if securities or other contracts to issue common stock were exercised or converted into common stock or resulted in the issuance of common stock that then shared in the income of the Company. The computation of weighted-average common shares outstanding, assuming dilution, excluded options to purchase 107,700 and 68,550 shares of our common stock for the three and six months ended December 31, 2016 and 2015, respectively, as the effect of including them would be anti-dilutive. As Unearned ESOP shares are released or committed-to-be-released the shares become outstanding for earnings-per-share computations.

Note 4.Stock Based Compensation

The Company follows ASC 718 in establishing standards for the accounting for transactions in which an entity exchanges its equity instruments for goods or services, as well as transactions in which an entity incurs liabilities in exchange for goods or services that are based on the fair value of the entity’s equity instruments or that may be settled by the issuance of those equity instruments. ASC 718 requires that the cost resulting from all share-based payment transactions be recognized in the financial statements based on the fair value of the share-based payment. ASC 718 establishes fair value as the measurement objective in accounting for share-based payment transactions with employees, except for equity instruments held by employee share ownership plans.

Total stock-based compensation expense recognized in the statements of comprehensive income for the three-month periods ended December 31, 2016 and 2015 was $29,715 and $21,783, respectively, before income taxes. The related total deferred tax benefits were approximately $2,359 and $1,765 for the same periods. Total stock-based compensation expense recognized in the statements of comprehensive income for the six-month periods ended December 31, 2016 and 2015, was $53,048 and $52,249, respectively. The related total deferred tax benefit was approximately $4,124 and $4,441 for the same periods. ASC 718 requires the tax benefits resulting from tax deductions in excess of the compensation cost recognized for those options to be classified and reported as both an operating cash outflow and a financing cash inflow.

As of December 31, 2016, there was approximately $193,945 of unrecognized compensation cost related to stock option awards that is expected to be recognized as expense over the next 2 years. The total deferred tax benefit related to these awards is approximately $16,896.

The Company has one employee stock option plan under which options may be granted, the 2007 Stock Option and Restricted Stock Plan (the "2007 Plan"). The Board of Directors may grant options to acquire shares of common stock to employees of the Company at the fair market value of the common stock on the date of grant. Generally, options granted have a two-year vesting period based on two years of continuous service and have a ten-year contractual life. Option grants provide for accelerated vesting if there is a change in control. Shares issued upon the exercise of options are from those held in Treasury. The 2007 Plan was approved by the Company's shareholders at the Company's Annual Meeting on November 30, 2007 and supersedes the Company's 2000 Stock Option Plan (the "2000 Plan"). Options covering 400,000 shares are authorized for issuance under the 2007 Plan, of which 278,300 have been granted and 200,900 are outstanding as of December 31, 2016. While no further grants of options may be made under the 2000 Plan, as of December 31, 2016, 2,200 options remain outstanding, vested and exercisable from the 2000 Plan.

ASC 718 requires the use of a valuation model to calculate the fair value of stock-based awards. The Company has elected to use the Black-Scholes option valuation model, which incorporates various assumptions including those for volatility, expected life and interest rates.

The table below outlines the weighted average assumptions that the Company used to calculate the fair value of the option award for the six months ended December 31, 2016 and 2015, respectively.

  December 31, 2016  December 31, 2015 
Dividend yield  3.85%   3.72% 
Expected stock price volatility  29.70%   28.06% 
Risk-free interest rate  1.84%   1.60% 
Expected option life (in years)  4.6 yrs   4.1 yrs 
Weighted average fair value per share $4.640  $4.431 
  of options granted during the period        

 

The Company declares dividends quarterly and paid cash dividends totaling $0.50 for the six months ended December 31, 2016 and 2015. Our Board of Directors assesses the Company’s dividend policy periodically. There is no assurance that the Board of Directors will maintain the amount of the regular cash dividend. Expected stock price volatility is based on the historical volatility of the Company’s stock. The risk-free interest rate is based on the implied yield available on U.S. Treasury issues with an equivalent term approximating the expected life of the options. The expected option life (in years) represents the estimated period of time until exercise and is based on actual historical experience.

The following table summarizes stock option activity during the six months ended December 31, 2016:

 

  Employee Stock Options Plan
      Weighted  
  Number of Weighted Average  
  Shares Average Remaining Aggregate
  Subject Exercise Contractual Intrinsic
  To Options Price Term Value
Balance at July 1, 2016  170,450  $23.84   5.73     
Granted  41,150  $26.25   9.93     
Exercised  (7,500) $18.17        
Forfeited or expired  (1,000) $26.09        
Outstanding at December 31, 2016  203,100  $24.53   6.32  $353,212 
Vested or expected to vest at December 31, 2016  190,360  $24.42   6.13  $352,610 
Exercisable at December 31, 2016  117,150  $23.31   4.25  $353,212 

 

The aggregate intrinsic value in the table above represents the total pretax intrinsic value (the difference between the closing sale price of the Company’s common stock as reported on the NYSE MKT on December 31, 2016 and the exercise price, multiplied by the number of in-the-money options) that would have been received by the option holders if all option holders had exercised their options on December 31, 2016. This amount changes based on the fair market value of the Company’s common stock. The total intrinsic values of the options exercised during the six months ended December 31, 2016 and 2015 were $15,189 and $6,512, respectively.

The following table summarizes changes in non-vested stock options during the three months ended December 31, 2016:

 

  Weighted Number Average Grant
  of Shares Date Fair
  Subject to Option Value (per Option)
Non-vested at July 1, 2016  45,800  $4.564 
Granted  41,150  $4.640 
Vested      
Forfeited or expired  (1,000) $4.710 
Non-vested at December 31, 2016  85,950  $4.599 

 

Note 5.Commitments and Contingencies

The Company at certain times enters into standby letters of credit agreements with financial institutions primarily relating to the guarantee of future performance on certain contracts. Contingent liabilities on outstanding standby letters of credit agreements aggregated to zero at December 31, 2016 and 2015. The Company, as a U.S. Government contractor, is subject to audits, reviews, and investigations by the U.S. Government related to its negotiation and performance of government contracts and its accounting for such contracts. Failure to comply with applicable U.S. Government standards by a contractor may result in suspension from eligibility for award of any new government contract and a guilty plea or conviction may result in debarment from eligibility for awards. The government may, in certain cases, also terminate existing contracts, recover damages, and impose other sanctions and penalties.

Note 6.Recently Issued Accounting Standards

In July 2015, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2015-11, “Inventory (Topic 330): Simplifying the Measurement of Inventory.” ASU No. 2015-11 requires inventory measured using any method other than last-in, first out or the retail inventory method to be subsequently measured at the lower of cost and net realizable value, rather than at the lower of cost or market. Net realizable value is defined as the estimated selling price, less the estimated costs to complete, dispose, and transport such inventory. ASU No. 2015-11 will be effective for fiscal years and interim periods beginning after December 15, 2016. ASU No. 2015-11 is required to be applied prospectively and early adoption is permitted. The Company’s adoption of ASU No. 2015-11 is not expected to have a material impact on the Company’s financial position or results of operations.

In May 2014, the FASB issued ASU No. 2014-09, “Revenue from Contracts with Customers,which supersedes nearly all existing revenue recognition guidance under U.S. GAAP. The core principle of ASU No. 2014-09 is to recognize revenues when promised goods or services are transferred to customers in an amount that reflects the consideration to which an entity expects to be entitled for those goods or services. ASU No. 2014-09 defines a five step process to achieve this core principle and, in doing so, more judgment and estimates may be required within the revenue recognition process than are required under existing U.S. GAAP.

In subsequent periods, the FASB issued additional ASUs intended to clarify specific aspects related to the interpretation and implementation of ASU No. 2014-09. In March 2016, the FASB issued ASU No. 2016-08, “Revenue from Contracts with Customers – Principal versus Agent Considerations (Reporting Revenue Gross versus Net)” to provide guidance on principal versus agent considerations by an entity as discussed in ASU No. 2014-09. ASU No. 2016-08 provides criteria to be assessed by an entity when determining whether it is the principal or agent in relation to the goods or services which the company is contractually obligated to provide to the customer. Among these considerations are; identifying the unit of account at which the entity should assess whether it is a principal or an agent, identifying the nature of the good or service provided to the customer; applying the control principle to certain types of transactions; and, interaction of the control principle with the indicators provided to assist in the principle versus agent evaluation. In April 2016, the FASB issued ASU No. 2016-10, “Revenue from Contracts with Customers – (Topic 606): Identifying Performance Obligations and Licensing” to provide implementation guidance related to the necessary judgements required in identifying performance obligations of a contract and guidance related to recognition of licensing revenues. In May 2016, the FASB issued ASU No. 2016-12, “Revenue from Contracts with Customers – (Topic 606): Narrow-Scope Improvements and Practical Expedients” to provide guidance related to the implementation of ASU No. 2014-09 in the following areas; assessing collectability for contracts that do not meet Step 1 of revenue recognition, presentation of sales taxes, noncash consideration, contract modifications at transition, and completed contracts at transition.

These standards are effective for annual periods beginning after December 15, 2017, and interim periods therein, using either of the following transition methods: (i) a full retrospective approach reflecting the application of the standard in each prior reporting period with the option to elect certain practical expedients, or (ii) a retrospective approach with the cumulative effect of initially adopting ASU No. 2014-09 recognized at the date of adoption (which includes additional footnote disclosures). Early adoption is permitted for annual periods beginning after December 15, 2016 and interim periods therein. We are currently evaluating the impact of our pending adoption of ASU No. 2014-09 on our financial statements and have not yet determined the method by which we will adopt the standard in fiscal 2019 beginning July 1, 2018.

In November 2015, the FASB issued ASU No. 2015-17, “Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes”. The guidance requires the classification of deferred tax assets and liabilities as noncurrent in a classified balance sheet. The current requirement that deferred tax assets and liabilities of a taxpaying component of an entity be offset and presented as a single amount is not affected by this update. ASU No. 2015-17 will be effective for annual periods beginning after December 15, 2016, and interim periods within those annual periods. ASU No. 2015-17 may be applied prospectively or retrospectively, and early adoption is permitted. Adoption of ASU No. 2015-17 would have the following impact on the Company’s financial statements at December 31, 2016; a decrease in current assets of $217,764, a decrease in noncurrent liabilities of $202,248 and an increase in noncurrent assets of $15,516.

In January 2016, the FASB issued ASU No. 2016-01, “Financial Instruments – Overall (Subtopic 825-10): Recognition and Measurement of Financial Assets and Financial Liabilities”. The amendments in this Update address certain aspects of recognition, measurement, presentation and disclosure of financial instruments (primarily equity securities) in order to enhance the reporting model for financial instruments to provide users of financial statements with more decision-useful information. ASU No. 2016-01 will be effective for annual periods beginning after December 15, 2017, and interim periods within those annual periods. The Company is evaluating the impact that ASU No. 2016-01 will have on the Company's financial statements.

In March 2016, the FASB issued ASU No. 2016-09, “Compensation – Stock Compensation (Topic 718): Improvements to Employee Share-Based Payment Accounting”. The areas for simplification in this update involve several aspects of the accounting for share-based payment transactions, including the income tax consequences, classification of awards as either equity or liabilities, and classification on the statement of cash flows. Additionally, this ASU allows an entity to make an accounting policy election to either estimate the number of awards that are expected to vest (current GAAP) or account for forfeitures as they occur. ASU No. 2016-09 will be effective for annual periods beginning after December 15, 2016, and interim periods within those annual periods. ASU No. 2016-09 may be applied prospectively or retrospectively, and early adoption is permitted. The Company is evaluating the impact that ASU No. 2016-09 will have on the Company's financial statements.

Note 7.Employee Stock Ownership Plan

The Company sponsors a leveraged employee stock ownership plan (the "ESOP") that covers all non-union employees who work 1,000 or more hours per year and are employed on June 30. The Company makes annual contributions to the ESOP equal to the ESOP's debt service less dividends on unallocated shares received by the ESOP. All dividends on unallocated shares received by the ESOP are used to pay debt service. Dividends on allocated ESOP shares are recorded as a reduction of retained earnings. As the debt is repaid, shares are released and allocated to active employees, based on the proportion of debt service paid in the year. The Company accounts for its ESOP in accordance with FASB ASC 718-40. Accordingly, the shares purchased by the ESOP are reported as Unearned ESOP shares in the statement of financial position. As shares are released or committed-to-be-released, the Company reports compensation expense equal to the current average market price of the shares, and the shares become outstanding for earnings-per-share (EPS) computations. ESOP compensation expense was $108,167 and $111,081 for the three-month periods ended December 31, 2016 and 2015, respectively. ESOP compensation expense was $216,876 and $224,175 for the six-month periods ended December 31, 2016 and 2015, respectively.

The ESOP shares as of December 31, 2016 and 2015 were as follows:

  December 31, 2016  December 31, 2015 
     Allocated shares  439,432   423,568 
     Committed-to-be-released shares  8,333   8,750 
     Unreleased shares  53,334   70,417 
         
     Total shares held by the ESOP  501,099   502,735 
         
     Fair value of unreleased shares $1,389,884  $1,813,238 

 

During the three and six months ended December 31, 2016 the Company repurchased 1,663 shares previously held in the ESOP for $44,335. During the three and six months ended December 31, 2015 the company repurchased 14,303 shares previously held in the ESOP for $355,418.

Item 2.Management's Discussion and Analysis of Financial Condition and Results of Operations

Overview

Espey Mfg. & Electronics Corp. (“Espey”) is a power electronics design and original equipment manufacturing (OEM) company with a long history of developing and delivering highly reliable products for use in military and severe environment applications. Design, manufacturing, and testing is performed in our 150,000+ square foot facility located at 233 Ballston Ave, Saratoga Springs, New York. Espey is classified as a “smaller reporting company” for purposes of the reporting requirements under the Securities Exchange Act of 1934, as amended. Espey’s common stock is publicly-traded on the NYSE MKT under the symbol “ESP.”

Espey began operations after incorporation in New York in 1928. We strive to remain competitive as a leader in high power energy conversion and transformer solutions through the design and manufacture of new and improved products by using advanced and “cutting edge” electronics technologies.

Espey is ISO 9001:2008 and AS9100:2009 certified. Our primary products are power supplies, power converters, filters, power transformers, magnetic components, power distribution equipment, UPS systems, antennas and high power radar systems. The applications of these products include AC and DC locomotives, shipboard power, shipboard radar, airborne power, ground-based radar, and ground mobile power.

Espey services include design and development to specification, build to print, design services, design studies, environmental testing services, metal fabrication, painting services, and development of automatic testing equipment. Espey is vertically integrated, meaning that the Company produces individual components (including inductors), populates printed circuit boards, fabricates metalwork, paints, wires, qualifies, and fully tests items, mechanically, electrically and environmentally, in house. Portions of the manufacturing and testing process are subcontracted to vendors from time to time.

The Company markets its products primarily through its own direct sales organization and through outside sales representatives. Business is solicited from large industrial manufacturers and defense companies, the government of the United States, foreign governments and major foreign electronic equipment companies. In certain countries the Company has external sales representatives to help solicit and coordinate foreign contracts. Espey is also on the eligible list of contractors with the United States Department of Defense and generally is automatically solicited by Defense Department procurement agencies for their needs falling within the major classes of products produced by the Company. In addition, the Company directly pursues opportunities from the United States Department of Defense for prime contracts. Espey contracts with the Federal Government under cage code 20950 as Espey Mfg. & Electronics Corp.

There is competition in all classes of products manufactured by the Company from divisions of the largest electronic companies, as well as many small companies. The Company's sales do not represent a significant share of the industry's market for any class of its products. The principal methods of competition for electronic products of both a military and industrial nature include, among other factors, price, product performance, the experience of the particular company and history of its dealings in such products.

Our business is not seasonal. However, the concentration of our business in the rail industry, and in equipment for military applications including our customer concentrations, expose us to on-going associated risks including, without limitation, dependence on appropriations from the United States Government and the governments of foreign nations, program allocations, the potential of governmental termination of orders for convenience, and the general health of our largest customers.

Uncertainty in federal defense spending and the current decline in the rail industry continues to drive competition. Many of our competitors have been aggressively investing in upfront product design costs and lowering profit margins as a strategic means of maintaining existing business and enhancing market share at the expense of short term profit. This has put pressure on the pricing of our current products and will result in lower margins on new business and some of our legacy business. In order to compete effectively for new business, in some cases we invest in upfront design costs, thereby reducing initial profitability as a means of procuring new long-term programs. Accordingly, we adjust our pricing strategy in order to achieve a balance which enables us both to retain repeat programs while being more competitive in bidding on new programs. This trend will continue in the current fiscal year as we continue to invest in new programs and aggressively quote long-term programs in an effort to grow the business.

In order to maintain a balanced business, we are continuing to place an emphasis on securing “build to print” opportunities, which will allow production work to go directly to the manufacturing floor, limiting the impact on our engineering staff. This effort will keep our manufacturing team busy while the products being developed transition to production. We have had some success with build to print opportunities. The selection of vendors by the potential customers to whom we have submitted quotations is taking longer than we originally anticipated. We will be unable to assess whether our initiative has been successful until the end of this fiscal year.

The Company's backlog was approximately $38.2 million at December 31, 2016 which includes $21.8 million from two significant customers compared to $43.0 million at December 31, 2015 which included $27.4 million from two significant customers. The backlog for the Company represents the estimated remaining sales value of work to be performed under firm contracts. This includes items that have been authorized and appropriated by Congress and/or funded by the customer. While there is no guarantee that future budgets and appropriations will provide funding for a given program, management includes in unfunded backlog only those programs that it believes are likely to receive funding based on discussions with customers and program status. The unfunded portions of the backlog at December 31, 2016 and 2015 were $0.

Management expects revenues in fiscal year 2017 to be less than revenues during fiscal 2016. This is primarily due to a decline we are experiencing in our industrial sector. As reported in our report on Form 10-K for the fiscal year ended June 30, 2016, a significant customer in the rail market advised us of its expectations for a scaled-back purchase plan due to falling demand for locomotives. For the six months ended December 31, 2016, shipments to this significant customer declined by 49% as compared with the same period in 2015 and new orders received from this significant customer declined by 87% as compared with the same period in 2015. We are working closely with our rail industry partners to secure long-term agreements that will allow us to support them through this downturn and provide a resumption of business for the Company upon a rail industry recovery. The anticipated sales decline in the rail industry may be offset, in part, by a new product for a customer in the military market which is currently in the final stages of design development and qualification testing. If the testing is successful, shipments of the product are expected to begin in the fourth quarter of the current fiscal year.

In order to address the downturn in the rail market and its impact on future sales and income, we also launched two additional military power supply designs in fiscal 2016, each for a different customer. All designs have progressed through critical design and have proceeded into qualification testing. We are experiencing some delays in qualification testing on one of these programs and expect future production orders to be delayed as well. We expect these new products to have significant multi-year production runs post qualification.

New orders received in the six months of fiscal 2017 were approximately $10.9 million as compared to $20.2 million of new orders received in the first six months of fiscal 2016, which included a $10.1 million initial production delivery order attributable to an award of a significant contract from the Federal Government for a power supply we have designed and is currently in the final stages of qualification. While we expect future procurements under this contract, due to the contract’s nature future procurements are not guaranteed and require the approval and allocation of funds by the Federal Government. The next procurement installment of the multi-year contract award is not expected until the product enters full-rate production, currently scheduled to commence in the fourth quarter of fiscal 2017. Each new order could be in the $10 million range. The orders received in the second quarter of fiscal 2017 include a power supply design and build contract from a new customer totaling approximately $3 million. If successful in design, this power supply could have a large volume of sales in future years, although currently we are unable to quantify the amount.

It is presently anticipated that a minimum of $11 million of orders comprising the December 31, 2016 backlog will be filled during the fiscal year ending June 30, 2017. The minimum of $11 million does not include any shipments, which may be made against orders subsequently received during the fiscal year ending June 30, 2017. The estimate of the December 31, 2016 backlog to be shipped in fiscal 2017 is subject to future events, which may cause the amount of the backlog actually shipped to differ from such estimate.

In addition to the backlog, the Company currently has outstanding opportunities representing in excess of $54 million in the aggregate as of January 31, 2017 for both repeat and new programs.The outstanding quotations encompass various new and previously manufactured power supplies, transformers, and subassemblies. However, there can be no assurance that the Company will acquire any of the anticipated orders described above, many of which are subject to allocations of the United States defense spending and factors affecting the defense industry and industrial locomotive power supply procurement generally.

Net sales to two significant customers represented 38.4% and 49.8% of the Company's total sales for the three-month period ended December 31, 2016 and 2015, respectively. Net sales to two significant customers represented 42.6% and 54.7% of the Company’s total sales for the six-month periods ended December 31, 2016 and 2015, respectively. This high concentration level with these customers presents significant risk. A loss of one of these customers or programs related to these customers could significantly impact the Company. Historically, a small number of customers have accounted for a large percentage of the Company’s total sales in any given fiscal year. Management continues to pursue opportunities with current and new customers with an overall objective of lowering the concentration of sales and mitigating excessive reliance upon a single major product of a particular program or minimizing the impact of the loss of a single significant customer.

10 

Critical Accounting Policies and Estimates

Management believes our most critical accounting policies include revenue recognition and cost estimation on our contracts.

A significant portion of our business is comprised of development and production contracts. Generally revenues on long-term fixed-price contracts are recorded on a percentage of completion basis using units of delivery as the measurement basis for progress toward completion.

Percentage of completion accounting requires judgment relative to expected sales, estimating costs and making assumptions related to technical issues and delivery schedules. Contract costs include material, subcontract costs, labor and an allocation of overhead costs. The estimation of cost at completion of a contract is subject to numerous variables involving contract costs and estimates as to the length of time to complete the contract. Given the significance of the estimation processes and judgments described above, it is possible that materially different amounts of expected sales and contract costs could be recorded if different assumptions were used, based on changes in circumstances, in the estimation process. When a change in expected sales value or estimated cost is determined, changes are reflected in current period earnings.

Results of Operations

Net sales decreased for the three months ended December 31, 2016, to $5,667,624 as compared to $7,242,020 for the same period in 2015. Net sales for the six months ended December 31, 2016, decreased to $11,736,308 as compared to $13,521,456 for the same period in 2015. For the three and six months ended December 31, 2016, the decrease in net sales is primarily due to the decrease in shipments in power supplies resulting from the scaled-back procurement by a significant customer due to falling demand offset by an increase in magnetic shipments.

For the three months ended December 31, 2016 and 2015, gross profits were $1,080,145 and $1,588,043, respectively. Gross profit as a percentage of sales was 19.1% and 21.9%, for the three months ended December 31, 2016 and 2015, respectively. For the six months ended December 31, 2016 and 2015, gross profits were $2,423,892 and $3,556,363, respectively. Gross profit as a percentage of sales was 20.7% and 26.3%, for the six months ended December 31, 2016 and 2015, respectively. The primary factors in determining gross profit and net income are overall sales levels and product mix. The gross profits on mature products and build to print contracts are typically higher as compared to products which are still in the engineering development stage or in early stages of production. In the case of the latter, the Company can incur what it refers to as “loss contracts,” meaning engineering design contracts in which the Company invests with the objective of developing future product sales. In any given accounting period the mix of product shipments between higher margin programs and less mature programs, and expenditures associated with loss contracts, has a significant impact on gross profit and net income. The gross profit percentage decreased in the three and six months ended December 31, 2016 as compared to the same period in 2015 due to product mix and an increase in expenditures related to engineering design investments, specifically, one of the military power supplies discussed above. The design investment resulted in a 4.1% and 3.6% decline in the gross profit percentage for the three and six months ended December 31, 2016, respectively.

 

Selling, general and administrative expenses were $750,381 for the three months ended December 31, 2016; a decrease of $4,577, compared to the three months ended December 31, 2015. Selling, general and administrative expenses were $1,523,047 for the six months ended December 31, 2016; an increase of $18,439 compared to the six months ended December 31, 2015. The decrease for the three months ended December 31, 2016 relates primarily to a decrease in professional services. The increase for the six months ended December 31, 2016 relates primarily to increased compensation costs offset by a decrease in professional services. 

Other income for the three months ended December 31, 2016 and 2015, was $18,655 and $37,173, respectively. Other income for the six months ended December 31, 2016 and 2015, was $37,678 and $62,614, respectively. The decrease is primarily due to a reduction in scrap sales partially offset by an increase in interest income.  

The Company’s effective tax rates for the three and six months ended December 31, 2016, were 29.9% and 29.2%, respectively, compared to 29.4% for the three and six months ended December 31, 2015. The effective tax rate is less than the statutory tax rate mainly due to the benefit the Company receives on its “qualified production activities” under The American Jobs Creation Act of 2004 and the benefit derived from the ESOP dividends paid on allocated shares.

Net income for the three months ended December 31, 2016, was $244,079 or $0.11 per share both basic and diluted, respectively compared to $614,427 or $0.27 per share both basic and diluted, for the three months ended December 31, 2015. Net income for the six months ended December 31, 2016, was $664,904 or $0.29 per share both basic and diluted compared to $1,492,957 or $0.65 per share both basic and diluted for the six months ended December 31, 2015. The decrease in net income per share for the three and six months ended December 31, 2016 compared to the same period in 2015 was mainly due to lower gross profit resulting from lower sales and lower gross profit percentage resulting from product mix and the increase in expenditures related to engineering design investments made by the company.

 

11 

Liquidity and Capital Resources

The Company's working capital is an appropriate indicator of the liquidity of its business, and during the past two fiscal years, the Company, when possible, has funded all of its operations with cash flows resulting from operating activities and when necessary from its existing cash and investments. The Company did not borrow any funds during the last two fiscal years. Management has available a $3,000,000 line of credit to help fund further growth or working capital and letter of credit needs, if necessary, but does not anticipate the need for any borrowed funds in the foreseeable future. Contingent liabilities on outstanding standby letters of credit agreements aggregated to zero at December 31, 2016 and 2015.

The Company's working capital as of December 31, 2016 and 2015 was approximately $29.9 million and $28.9 million, respectively. During the three and six-months ended December 31, 2016 the Company repurchased 1,663 shares of its common stock from the Company’s Employee Retirement Plan and Trust (“ESOP”) for a purchase price of $44,335. During the three and six months ended December 31, 2015 the Company repurchased 14,303 shares of its common stock from the ESOP for a purchase price of $355,418. Under existing authorizations from the Company's Board of Directors, as of December 31, 2016, management is authorized to purchase an additional $985,991 of Company stock.

The table below presents the summary of cash flow information for the fiscal years indicated:

  Six Months Ended December 31, 
  2016  2015 
Net cash provided by operating activities $3,489,362  $3,818,117 
Net cash (used in) investing activities  (3,611,126)  (1,147,250)
Net cash (used in) financing activities  (1,052,602)  (1,983,054)

 

Net cash provided by operating activities fluctuates between periods primarily as a result of differences in sales and net income, provisions for income taxes, the timing of the collection of accounts receivable, purchase of inventory, and payment of accounts payable. The decrease in cash provided by operating activities primarily relates to a decrease in net income and the decrease in cash collections on accounts receivable offset by the reduction in payments for inventory purchases for the period. Net cash used by investing activities increased in the first six months of fiscal 2017 due to an increase in the purchase of investment securities. The decrease in cash used in financing activities is due primarily to the fact that fewer shares were purchased from the Company’s ESOP during the six months ended December 31, 2016 compared with the same period in 2015. In addition, cash expended for the six months ended December 31, 2015 included the dividend payable at June 30, 2015.

The Company currently believes that the cash flow generated from operations and when necessary, from cash and cash equivalents will be sufficient to meet its long-term funding requirements for the foreseeable future.

During the six months ended December 31, 2016 and 2015, the Company expended $223,211 and $82,341, respectively, for plant improvements and new equipment. The Company has budgeted approximately $750,000 for new equipment and plant improvements in fiscal 2017. Management anticipates that the funds required will be available from current operations.

Management also believes that the Company's reserve for bad debts of $3,000 is adequate given the customers with whom the Company does business. Historically, bad debt expense has been minimal.

 

12 

CAUTIONARY STATEMENT FOR PURPOSES OF THE "SAFE HARBOR" PROVISIONS OF THE PRIVATE

SECURITIES LITIGATION REFORM ACT OF 1995

 

This report contains "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. The terms "believe," "anticipate," "intend," "goal," "expect," and similar expressions may identify forward-looking statements. These forward-looking statements represent the Company's current expectations or beliefs concerning future events. The matters covered by these statements are subject to certain risks and uncertainties that could cause actual results to differ materially from those set forth in the forward-looking statements, including the Company's dependence on timely development, introduction and customer acceptance of new products, the impact of competition and price erosion, supply and manufacturing constraints, potential new orders from customers and other risks and uncertainties. The foregoing list should not be construed as exhaustive, and the Company disclaims any obligation subsequently to revise any forward-looking statements to reflect events or circumstances after the date of such statements or to reflect the occurrence of anticipated or unanticipated events. The Company wishes to caution readers not to place undue reliance on any such forward-looking statements, which speak only as of the date made.

 

Item 3. Quantitative and Qualitative Disclosures About Market Risk

 

The Company is a smaller reporting company as defined under Securities and Exchange Commission Rule 12b-2. Pursuant to the exemption available to smaller reporting company issuers under Item 305 of Regulation S-K, quantitative and qualitative disclosures about market risk, the Company is not required to provide the information for this item.

 

Item 4. Controls and Procedures

 

(a) The Company's management, with the participation of the Company's chief executive officer and chief financial officer, carried out an evaluation of the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934) as of the end of the period covered by this Quarterly Report on Form 10-Q. Based on such evaluation, our chief executive officer and chief financial officer have concluded that our disclosure controls and procedures were effective as of the end of the period covered by this report.

 

(b) There have been no changes in our internal controls over financial reporting during the period covered by this report that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

 

13 

PART II: Other Information and Signatures

 

Item 1.Legal Proceedings

None

Item 2.Unregistered Sales of Equity Securities and Use of Proceeds
(a)Securities Sold -None
(c)Securities Repurchased
 Purchases of Equity Securities
    Total NumberMaximum Number
    of Shares(or Approximate
    PurchasedDollar Value)
    as Part ofof Shares
  TotalAveragePubliclythat May Yet
  NumberPriceAnnouncedBe Purchased
  of SharesPaidPlan orUnder the Plan
 PeriodPurchasedper ShareProgramor Program (1)
 December 1 to    
 December 31, 20161,663$26.461,663$985,991
(1)Pursuant to a prior Board of Directors authorization, as of December 31, 2016 the Company can repurchase up to $985,991 of its common stock pursuant to an ongoing plan.
Item 3.Defaults Upon Senior Securities

None

Item 4.Mine Safety Disclosures

Not applicable

Item 5.Other Information

None

Item 6.Exhibits
 31.1Certification of the Chief Executive Officer pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
   
 31.2Certification of the Principal Financial Officer pursuant to Rules 13a-14(a) and 15d-14(a) under the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
   
 32.1Certification of the Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
   
 32.2Certification of the Principal Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

14 

 

S I G N A T U R E S

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 ESPEY MFG. & ELECTRONICS CORP.
  
  
 /s/ Patrick Enright Jr.
 Patrick Enright Jr.
 President and Chief Executive Officer
  
 /s/ David O'Neil
 David O'Neil
 Treasurer and Principal Financial Officer

 

 

Date: February 9, 2017

15